HariBabu Gattem [Fri, 27 Oct 2023 05:56:22 +0000 (22:56 -0700)]
soc: xilinx: Fix for call trace due to the usage of smp_processor_id()
[ Upstream commit
daed80ed07580e5adc0e6d8bc79933a35154135a ]
When preemption is enabled in kernel and if any task which can be
preempted should not use smp_processor_id() directly, since CPU
switch can happen at any time, the previous value of cpu_id
differs with current cpu_id. As a result we see the below call trace
during xlnx_event_manager_probe.
[ 6.140197] dump_backtrace+0x0/0x190
[ 6.143884] show_stack+0x18/0x40
[ 6.147220] dump_stack_lvl+0x7c/0xa0
[ 6.150907] dump_stack+0x18/0x34
[ 6.154241] check_preemption_disabled+0x124/0x134
[ 6.159068] debug_smp_processor_id+0x20/0x2c
[ 6.163453] xlnx_event_manager_probe+0x48/0x250
To protect cpu_id, It is recommended to use get_cpu()/put_cpu()
to disable preemption, get the cpu_id and enable preemption respectively.
(For Reference, Documentation/locking/preempt-locking.rst and
Documentation/kernel-hacking/hacking.rst)
Use preempt_disable()/smp_processor_id()/preempt_enable()
API's to achieve the same.
Signed-off-by: HariBabu Gattem <haribabu.gattem@xilinx.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231027055622.21544-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 28 Sep 2023 11:02:43 +0000 (14:02 +0300)]
ARM: dts: qcom: msm8660: fix PMIC node labels
[ Upstream commit
c6d86aa8a12194d1c9c2f9108910a46c8a3ddc90 ]
Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 28 Sep 2023 11:02:42 +0000 (14:02 +0300)]
ARM: dts: qcom: mdm9615: fix PMIC node labels
[ Upstream commit
0e4688cd4ee6efbeae2b31f75e16961fd7f72735 ]
Change PM8018 node labels to start with pm8018_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-10-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 28 Sep 2023 11:02:40 +0000 (14:02 +0300)]
ARM: dts: qcom: strip prefix from PMIC files
[ Upstream commit
455a4c46e023ab84263eae0fc7acca9a5ee8b7ac ]
As the vendor DTS files were moved to per-vendor subdirs, there no need
to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file.
This makes 32-bit qcom/ dts files closer to arm64 ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yafang Shao [Sat, 11 Nov 2023 09:00:30 +0000 (09:00 +0000)]
selftests/bpf: Fix issues in setup_classid_environment()
[ Upstream commit
4849775587844e44d215289c425bcd70f315efe7 ]
If the net_cls subsystem is already mounted, attempting to mount it again
in setup_classid_environment() will result in a failure with the error code
EBUSY. Despite this, tmpfs will have been successfully mounted at
/sys/fs/cgroup/net_cls. Consequently, the /sys/fs/cgroup/net_cls directory
will be empty, causing subsequent setup operations to fail.
Here's an error log excerpt illustrating the issue when net_cls has already
been mounted at /sys/fs/cgroup/net_cls prior to running
setup_classid_environment():
- Before that change
$ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2
test_cgroup_v1v2:PASS:server_fd 0 nsec
test_cgroup_v1v2:PASS:client_fd 0 nsec
test_cgroup_v1v2:PASS:cgroup_fd 0 nsec
test_cgroup_v1v2:PASS:server_fd 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs
(cgroup_helpers.c:540: errno: No such file or directory) Opening cgroup classid: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/net_cls.classid
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/cgroup.procs
run_test:FAIL:join_classid unexpected error: 1 (errno 2)
test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 2)
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs
#44 cgroup_v1v2:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
- After that change
$ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2
#44 cgroup_v1v2:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231111090034.4248-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shiji Yang [Thu, 9 Nov 2023 04:38:51 +0000 (12:38 +0800)]
wifi: rt2x00: correct wrong BBP register in RxDCOC calibration
[ Upstream commit
50da74e1e8b682853d1e07fc8bbe3a0774ae5e09 ]
Refer to Mediatek vendor driver RxDCOC_Calibration() function, when
performing gainfreeze calibration, we should write register 140
instead of 141. This fix can reduce the total calibration time from
6 seconds to 1 second.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB0315B13B89DF57B6B27BB854BCAFA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Fri, 10 Nov 2023 19:36:44 +0000 (11:36 -0800)]
selftests/bpf: Fix pyperf180 compilation failure with clang18
[ Upstream commit
100888fb6d8a185866b1520031ee7e3182b173de ]
With latest clang18 (main branch of llvm-project repo), when building bpf selftests,
[~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j
The following compilation error happens:
fatal error: error in backend: Branch target out of insn range
...
Stack dump:
0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi
-I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter
/home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include
-idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf
-c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o
1. <eof> parser at end of file
2. Code generation
...
The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay
since cpu=v4 supports 32-bit branch target offset.
The above failure is due to upstream llvm patch [1] where some inlining behavior
are changed in clang18.
To workaround the issue, previously all 180 loop iterations are fully unrolled.
The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid
unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the
compiler is clang18, the unrollng amount is unconditionally reduced.
[1] https://github.com/llvm/llvm-project/commit/
1a2e77cf9e11dbf56b5720c607313a566eebb16e
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Tue, 7 Nov 2023 20:15:11 +0000 (12:15 -0800)]
libbpf: Fix potential uninitialized tail padding with LIBBPF_OPTS_RESET
[ Upstream commit
7f7c43693c1b46652cfafb7af67ba31726d6ec4e ]
Martin reported that there is a libbpf complaining of non-zero-value tail
padding with LIBBPF_OPTS_RESET macro if struct bpf_netkit_opts is modified
to have a 4-byte tail padding. This only happens to clang compiler.
The commend line is: ./test_progs -t tc_netkit_multi_links
Martin and I did some investigation and found this indeed the case and
the following are the investigation details.
Clang:
clang version 18.0.0
<I tried clang15/16/17 and they all have similar results>
tools/lib/bpf/libbpf_common.h:
#define LIBBPF_OPTS_RESET(NAME, ...) \
do { \
memset(&NAME, 0, sizeof(NAME)); \
NAME = (typeof(NAME)) { \
.sz = sizeof(NAME), \
__VA_ARGS__ \
}; \
} while (0)
#endif
tools/lib/bpf/libbpf.h:
struct bpf_netkit_opts {
/* size of this struct, for forward/backward compatibility */
size_t sz;
__u32 flags;
__u32 relative_fd;
__u32 relative_id;
__u64 expected_revision;
size_t :0;
};
#define bpf_netkit_opts__last_field expected_revision
In the above struct bpf_netkit_opts, there is no tail padding.
prog_tests/tc_netkit.c:
static void serial_test_tc_netkit_multi_links_target(int mode, int target)
{
...
LIBBPF_OPTS(bpf_netkit_opts, optl);
...
LIBBPF_OPTS_RESET(optl,
.flags = BPF_F_BEFORE,
.relative_fd = bpf_program__fd(skel->progs.tc1),
);
...
}
Let us make the following source change, note that we have a 4-byte
tailing padding now.
# diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h
# index
6cd9c501624f..
0dd83910ae9a 100644
# --- a/tools/lib/bpf/libbpf.h
# +++ b/tools/lib/bpf/libbpf.h
# @@ -803,13 +803,13 @@ bpf_program__attach_tcx(const struct bpf_program *prog, int ifindex,
# struct bpf_netkit_opts {
# /* size of this struct, for forward/backward compatibility */
# size_t sz;
# - __u32 flags;
# __u32 relative_fd;
# __u32 relative_id;
# __u64 expected_revision;
# + __u32 flags;
# size_t :0;
# };
# -#define bpf_netkit_opts__last_field expected_revision
# +#define bpf_netkit_opts__last_field flags
The clang 18 generated asm code looks like below:
; LIBBPF_OPTS_RESET(optl,
55e3: 48 8d 7d 98 leaq -0x68(%rbp), %rdi
55e7: 31 f6 xorl %esi, %esi
55e9: ba 20 00 00 00 movl $0x20, %edx
55ee: e8 00 00 00 00 callq 0x55f3 <serial_test_tc_netkit_multi_links_target+0x18d3>
55f3: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp)
55fe: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax
5605: 48 8b 78 18 movq 0x18(%rax), %rdi
5609: e8 00 00 00 00 callq 0x560e <serial_test_tc_netkit_multi_links_target+0x18ee>
560e: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp)
5614: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp)
561e: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp)
5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp)
5633: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax
563a: 48 89 45 98 movq %rax, -0x68(%rbp)
563e: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax
5645: 48 89 45 a0 movq %rax, -0x60(%rbp)
5649: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax
5650: 48 89 45 a8 movq %rax, -0x58(%rbp)
5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax
565b: 48 89 45 b0 movq %rax, -0x50(%rbp)
; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl);
At -O0 level, the clang compiler creates an intermediate copy.
We have below to store 'flags' with 4-byte store and leave another 4 byte
in the same 8-byte-aligned storage undefined,
5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp)
and later we store 8-byte to the original zero'ed buffer
5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax
565b: 48 89 45 b0 movq %rax, -0x50(%rbp)
This caused a problem as the 4-byte value at [%rbp-0x2dc, %rbp-0x2e0)
may be garbage.
gcc (gcc 11.4) does not have this issue as it does zeroing struct first before
doing assignments:
; LIBBPF_OPTS_RESET(optl,
50fd: 48 8d 85 40 fc ff ff leaq -0x3c0(%rbp), %rax
5104: ba 20 00 00 00 movl $0x20, %edx
5109: be 00 00 00 00 movl $0x0, %esi
510e: 48 89 c7 movq %rax, %rdi
5111: e8 00 00 00 00 callq 0x5116 <serial_test_tc_netkit_multi_links_target+0x1522>
5116: 48 8b 45 f0 movq -0x10(%rbp), %rax
511a: 48 8b 40 18 movq 0x18(%rax), %rax
511e: 48 89 c7 movq %rax, %rdi
5121: e8 00 00 00 00 callq 0x5126 <serial_test_tc_netkit_multi_links_target+0x1532>
5126: 48 c7 85 40 fc ff ff 00 00 00 00 movq $0x0, -0x3c0(%rbp)
5131: 48 c7 85 48 fc ff ff 00 00 00 00 movq $0x0, -0x3b8(%rbp)
513c: 48 c7 85 50 fc ff ff 00 00 00 00 movq $0x0, -0x3b0(%rbp)
5147: 48 c7 85 58 fc ff ff 00 00 00 00 movq $0x0, -0x3a8(%rbp)
5152: 48 c7 85 40 fc ff ff 20 00 00 00 movq $0x20, -0x3c0(%rbp)
515d: 89 85 48 fc ff ff movl %eax, -0x3b8(%rbp)
5163: c7 85 58 fc ff ff 08 00 00 00 movl $0x8, -0x3a8(%rbp)
; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl);
It is not clear how to resolve the compiler code generation as the compiler
generates correct code w.r.t. how to handle unnamed padding in C standard.
So this patch changed LIBBPF_OPTS_RESET macro to avoid uninitialized tail
padding. We already knows LIBBPF_OPTS macro works on both gcc and clang,
even with tail padding. So LIBBPF_OPTS_RESET is changed to be a
LIBBPF_OPTS followed by a memcpy(), thus avoiding uninitialized tail padding.
The below is asm code generated with this patch and with clang compiler:
; LIBBPF_OPTS_RESET(optl,
55e3: 48 8d bd 10 fd ff ff leaq -0x2f0(%rbp), %rdi
55ea: 31 f6 xorl %esi, %esi
55ec: ba 20 00 00 00 movl $0x20, %edx
55f1: e8 00 00 00 00 callq 0x55f6 <serial_test_tc_netkit_multi_links_target+0x18d6>
55f6: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp)
5601: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax
5608: 48 8b 78 18 movq 0x18(%rax), %rdi
560c: e8 00 00 00 00 callq 0x5611 <serial_test_tc_netkit_multi_links_target+0x18f1>
5611: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp)
5617: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp)
5621: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp)
562c: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp)
5636: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax
563d: 48 89 45 98 movq %rax, -0x68(%rbp)
5641: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax
5648: 48 89 45 a0 movq %rax, -0x60(%rbp)
564c: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax
5653: 48 89 45 a8 movq %rax, -0x58(%rbp)
5657: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax
565e: 48 89 45 b0 movq %rax, -0x50(%rbp)
; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl);
In the above code, a temporary buffer is zeroed and then has proper value assigned.
Finally, values in temporary buffer are copied to the original variable buffer,
hence tail padding is guaranteed to be 0.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20231107201511.2548645-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrii Nakryiko [Thu, 2 Nov 2023 03:37:44 +0000 (20:37 -0700)]
selftests/bpf: satisfy compiler by having explicit return in btf test
[ Upstream commit
f4c7e887324f5776eef6e6e47a90e0ac8058a7a8 ]
Some compilers complain about get_pprint_mapv_size() not returning value
in some code paths. Fix with explicit return.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 2 Nov 2023 03:37:43 +0000 (20:37 -0700)]
selftests/bpf: fix RELEASE=1 build for tc_opts
[ Upstream commit
2b62aa59d02ed281fa4fc218df3ca91b773e1e62 ]
Compiler complains about malloc(). We also don't need to dynamically
allocate anything, so make the life easier by using statically sized
buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shiji Yang [Sat, 4 Nov 2023 08:58:00 +0000 (16:58 +0800)]
wifi: rt2x00: restart beacon queue when hardware reset
[ Upstream commit
a11d965a218f0cd95b13fe44d0bcd8a20ce134a8 ]
When a hardware reset is triggered, all registers are reset, so all
queues are forced to stop in hardware interface. However, mac80211
will not automatically stop the queue. If we don't manually stop the
beacon queue, the queue will be deadlocked and unable to start again.
This patch fixes the issue where Apple devices cannot connect to the
AP after calling ieee80211_restart_hw().
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB031530EB6D98DCE4DF20766CBCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Antipov [Tue, 24 Oct 2023 14:31:33 +0000 (17:31 +0300)]
wifi: rtw89: fix timeout calculation in rtw89_roc_end()
[ Upstream commit
e416514e309f7e25e577fee45a65f246f67b2261 ]
Since 'rtw89_core_tx_kick_off_and_wait()' assumes timeout
(actually RTW89_ROC_TX_TIMEOUT) in milliseconds, I suppose
that RTW89_ROC_IDLE_TIMEOUT is in milliseconds as well. If
so, 'msecs_to_jiffies()' should be used in a call to
'ieee80211_queue_delayed_work()' from 'rtw89_roc_end()'.
Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231024143137.30393-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baokun Li [Mon, 23 Oct 2023 01:30:56 +0000 (09:30 +0800)]
ext4: avoid online resizing failures due to oversized flex bg
[ Upstream commit
5d1935ac02ca5aee364a449a35e2977ea84509b0 ]
When we online resize an ext4 filesystem with a oversized flexbg_size,
mkfs.ext4 -F -G
67108864 $dev -b 4096 100M
mount $dev $dir
resize2fs $dev 16G
the following WARN_ON is triggered:
==================================================================
WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550
Modules linked in: sg(E)
CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314
RIP: 0010:__alloc_pages+0x411/0x550
Call Trace:
<TASK>
__kmalloc_large_node+0xa2/0x200
__kmalloc+0x16e/0x290
ext4_resize_fs+0x481/0xd80
__ext4_ioctl+0x1616/0x1d90
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xf0/0x150
do_syscall_64+0x3b/0x90
==================================================================
This is because flexbg_size is too large and the size of the new_group_data
array to be allocated exceeds MAX_ORDER. Currently, the minimum value of
MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding
maximum number of groups that can be allocated is:
(PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845
And the value that is down-aligned to the power of 2 is 16384. Therefore,
this value is defined as MAX_RESIZE_BG, and the number of groups added
each time does not exceed this value during resizing, and is added multiple
times to complete the online resizing. The difference is that the metadata
in a flex_bg may be more dispersed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baokun Li [Mon, 23 Oct 2023 01:30:55 +0000 (09:30 +0800)]
ext4: remove unnecessary check from alloc_flex_gd()
[ Upstream commit
b099eb87de105cf07cad731ded6fb40b2675108b ]
In commit
967ac8af4475 ("ext4: fix potential integer overflow in
alloc_flex_gd()"), an overflow check is added to alloc_flex_gd() to
prevent the allocated memory from being smaller than expected due to
the overflow. However, after kmalloc() is replaced with kmalloc_array()
in commit
6da2ec56059c ("treewide: kmalloc() -> kmalloc_array()"), the
kmalloc_array() function has an overflow check, so the above problem
will not occur. Therefore, the extra check is removed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baokun Li [Mon, 23 Oct 2023 01:30:54 +0000 (09:30 +0800)]
ext4: unify the type of flexbg_size to unsigned int
[ Upstream commit
658a52344fb139f9531e7543a6e0015b630feb38 ]
The maximum value of flexbg_size is 2^31, but the maximum value of int
is (2^31 - 1), so overflow may occur when the type of flexbg_size is
declared as int.
For example, when uninit_mask is initialized in ext4_alloc_group_tables(),
if flexbg_size == 2^31, the initialized uninit_mask is incorrect, and this
may causes set_flexbg_block_bitmap() to trigger a BUG_ON().
Therefore, the flexbg_size type is declared as unsigned int to avoid
overflow and memory waste.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Sat, 16 Dec 2023 01:09:19 +0000 (09:09 +0800)]
ext4: fix inconsistent between segment fstrim and full fstrim
[ Upstream commit
68da4c44b994aea797eb9821acb3a4a36015293e ]
Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Krisman Bertazi [Fri, 11 Aug 2023 18:38:12 +0000 (14:38 -0400)]
ecryptfs: Reject casefold directory inodes
[ Upstream commit
cd72c7ef5fed44272272a105b1da22810c91be69 ]
Even though it seems to be able to resolve some names of
case-insensitive directories, the lack of d_hash and d_compare means we
end up with a broken state in the d_cache. Considering it was never a
goal to support these two together, and we are preparing to use
d_revalidate in case-insensitive filesystems, which would make the
combination even more broken, reject any attempt to get a casefolded
inode from ecryptfs.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Sun, 26 Nov 2023 02:55:07 +0000 (23:55 -0300)]
smb: client: fix hardlinking of reparse points
[ Upstream commit
5408990aa662bcfd6ba894734023a023a16e8729 ]
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire hardlink operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Sun, 26 Nov 2023 02:55:06 +0000 (23:55 -0300)]
smb: client: fix renaming of reparse points
[ Upstream commit
7435d51b7ea2ab7801279c43ecd72063e9d5c92f ]
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire rename operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ojaswin Mujoo [Wed, 1 Nov 2023 16:38:10 +0000 (22:08 +0530)]
ext4: treat end of range as exclusive in ext4_zero_range()
[ Upstream commit
92573369144f40397e8514440afdf59f24905b40 ]
The call to filemap_write_and_wait_range() assumes the range passed to be
inclusive, so fix the call to make sure we follow that.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/e503107a7c73a2b68dec645c5ad798c437717c45.1698856309.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anna Schumaker [Mon, 27 Nov 2023 22:06:18 +0000 (17:06 -0500)]
SUNRPC: Fix a suspicious RCU usage warning
[ Upstream commit
31b62908693c90d4d07db597e685d9f25a120073 ]
I received the following warning while running cthon against an ontap
server running pNFS:
[ 57.202521] =============================
[ 57.202522] WARNING: suspicious RCU usage
[ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted
[ 57.202525] -----------------------------
[ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!!
[ 57.202527]
other info that might help us debug this:
[ 57.202528]
rcu_scheduler_active = 2, debug_locks = 1
[ 57.202529] no locks held by test5/3567.
[ 57.202530]
stack backtrace:
[ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492
5b09971b4965c0aceba19f3eea324a4a806e227e
[ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
[ 57.202536] Call Trace:
[ 57.202537] <TASK>
[ 57.202540] dump_stack_lvl+0x77/0xb0
[ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0
[ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files
e3a4187f18ae8a27b630f9feae6831b584a9360a]
[ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files
e3a4187f18ae8a27b630f9feae6831b584a9360a]
[ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202866] write_cache_pages+0x265/0x450
[ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202891] nfs_writepages+0x141/0x230 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202913] do_writepages+0xd2/0x230
[ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80
[ 57.202921] filemap_fdatawrite_wbc+0x67/0x80
[ 57.202924] filemap_write_and_wait_range+0xd9/0x170
[ 57.202930] nfs_wb_all+0x49/0x180 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202969] __se_sys_close+0x46/0xd0
[ 57.202972] do_syscall_64+0x68/0x100
[ 57.202975] ? do_syscall_64+0x77/0x100
[ 57.202976] ? do_syscall_64+0x77/0x100
[ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 57.202982] RIP: 0033:0x7fe2b12e4a94
[ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3
[ 57.202987] RSP: 002b:
00007ffe857ddb38 EFLAGS:
00000202 ORIG_RAX:
0000000000000003
[ 57.202989] RAX:
ffffffffffffffda RBX:
00007ffe857dfd68 RCX:
00007fe2b12e4a94
[ 57.202991] RDX:
0000000000002000 RSI:
00007ffe857ddc40 RDI:
0000000000000003
[ 57.202992] RBP:
00007ffe857dfc50 R08:
7fffffffffffffff R09:
0000000065650f49
[ 57.202993] R10:
00007fe2b11f8300 R11:
0000000000000202 R12:
0000000000000000
[ 57.202994] R13:
00007ffe857dfd80 R14:
00007fe2b1445000 R15:
0000000000000000
[ 57.202999] </TASK>
The problem seems to be that two out of three callers aren't taking the
rcu_read_lock() before calling the list_for_each_entry_rcu() function in
rpc_xprt_switch_has_addr(). I fix this by having
rpc_xprt_switch_has_addr() unconditionaly take the rcu_read_lock(),
which is okay to do recursively in the case that the lock has already
been taken by a caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Granados [Tue, 21 Nov 2023 11:02:18 +0000 (12:02 +0100)]
sysctl: Fix out of bounds access for empty sysctl registers
[ Upstream commit
315552310c7de92baea4e570967066569937a843 ]
When registering tables to the sysctl subsystem there is a check to see
if header is a permanently empty directory (used for mounts). This check
evaluates the first element of the ctl_table. This results in an out of
bounds evaluation when registering empty directories.
The function register_sysctl_mount_point now passes a ctl_table of size
1 instead of size 0. It now relies solely on the type to identify
a permanently empty register.
Make sure that the ctl_table has at least one element before testing for
permanent emptiness.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/
202311201431.
57aae8f3-oliver.sang@intel.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Thu, 30 Nov 2023 17:56:00 +0000 (18:56 +0100)]
KVM: s390: fix setting of fpc register
[ Upstream commit
b988b1bb0053c0dcd26187d29ef07566a565cf55 ]
kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.
test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.
In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.
Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.
This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Thu, 30 Nov 2023 17:55:59 +0000 (18:55 +0100)]
s390/ptrace: handle setting of fpc register correctly
[ Upstream commit
8b13601d19c541158a6e18b278c00ba69ae37829 ]
If the content of the floating point control (fpc) register of a traced
process is modified with the ptrace interface the new value is tested for
validity by temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the tracing process:
if an interrupt happens while the value is temporarily loaded into the
fpc register, and within interrupt context floating point or vector
registers are used, the current fp/vx registers are saved with
save_fpu_regs() assuming they belong to user space and will be loaded into
fp/vx registers when returning to user space.
test_fp_ctl() restores the original user space fpc register value, however
it will be discarded, when returning to user space.
In result the tracer will incorrectly continue to run with the value that
was supposed to be used for the traced process.
Fix this by saving fpu register contents with save_fpu_regs() before using
test_fp_ctl().
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Krowiak [Wed, 8 Nov 2023 20:11:30 +0000 (15:11 -0500)]
s390/vfio-ap: fix sysfs status attribute for AP queue devices
[ Upstream commit
a0d8f4eeb7c4ffaee21702bcc91a09b3988c5b7a ]
The 'status' attribute for AP queue devices bound to the vfio_ap device
driver displays incorrect status when the mediated device is attached to a
guest, but the queue device is not passed through. In the current
implementation, the status displayed is 'in_use' which is not correct; it
should be 'assigned'. This can happen if one of the queue devices
associated with a given adapter is not bound to the vfio_ap device driver.
For example:
Queues listed in /sys/bus/ap/drivers/vfio_ap:
14.0005
14.0006
14.000d
16.0006
16.000d
Queues listed in /sys/devices/vfio_ap/matrix/$UUID/matrix
14.0005
14.0006
14.000d
16.0005
16.0006
16.000d
Queues listed in /sys/devices/vfio_ap/matrix/$UUID/guest_matrix
14.0005
14.0006
14.000d
The reason no queues for adapter 0x16 are listed in the guest_matrix is
because queue 16.0005 is not bound to the vfio_ap device driver, so no
queue associated with the adapter is passed through to the guest;
therefore, each queue device for adapter 0x16 should display 'assigned'
instead of 'in_use', because those queues are not in use by a guest, but
only assigned to the mediated device.
Let's check the AP configuration for the guest to determine whether a
queue device is passed through before displaying a status of 'in_use'.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20231108201135.351419-1-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 8 Nov 2023 12:58:29 +0000 (13:58 +0100)]
arch: consolidate arch_irq_work_raise prototypes
[ Upstream commit
64bac5ea17d527872121adddfee869c7a0618f8f ]
The prototype was hidden in an #ifdef on x86, which causes a warning:
kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes]
Some architectures have a working prototype, while others don't.
Fix this by providing it in only one place that is always visible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Gordeev [Sun, 16 Jul 2023 08:56:00 +0000 (10:56 +0200)]
s390/boot: always align vmalloc area on segment boundary
[ Upstream commit
65f8780e2d70257200547b5a7654974aa7c37ce1 ]
The size of vmalloc area depends from various factors
on boot and could be set to:
1. Default size as determined by VMALLOC_DEFAULT_SIZE macro;
2. One half of the virtual address space not occupied by
modules and fixed mappings;
3. The size provided by user with vmalloc= kernel command
line parameter;
In cases [1] and [2] the vmalloc area base address is aligned
on Region3 table type boundary, while in case [3] in might get
aligned on page boundary.
Limit the waste of page tables and always align vmalloc area
size and base address on segment boundary.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Adam Davis [Tue, 12 Dec 2023 01:36:22 +0000 (09:36 +0800)]
jfs: fix array-index-out-of-bounds in diNewExt
[ Upstream commit
49f9637aafa6e63ba686c13cb8549bf5e6920402 ]
[Syz report]
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2
index -
878706688 is out of range for type 'struct iagctl[128]'
CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360
diAllocExt fs/jfs/jfs_imap.c:1949 [inline]
diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666
diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587
ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225
vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106
do_mkdirat+0x264/0x3a0 fs/namei.c:4129
__do_sys_mkdir fs/namei.c:4149 [inline]
__se_sys_mkdir fs/namei.c:4147 [inline]
__x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fcb7e6a0b57
Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffd83023038 EFLAGS:
00000286 ORIG_RAX:
0000000000000053
RAX:
ffffffffffffffda RBX:
00000000ffffffff RCX:
00007fcb7e6a0b57
RDX:
00000000000a1020 RSI:
00000000000001ff RDI:
0000000020000140
RBP:
0000000020000140 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000286 R12:
00007ffd830230d0
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
[Analysis]
When the agstart is too large, it can cause agno overflow.
[Fix]
After obtaining agno, if the value is invalid, exit the subsequent process.
Reported-and-tested-by: syzbot+553d90297e6d2f50dbc7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next
report by kernel test robot (Dan Carpenter).
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleg Nesterov [Fri, 17 Nov 2023 16:48:46 +0000 (17:48 +0100)]
rxrpc_find_service_conn_rcu: fix the usage of read_seqbegin_or_lock()
[ Upstream commit
bad1a11c0f061aa073bab785389fe04f19ba02e1 ]
rxrpc_find_service_conn_rcu() should make the "seq" counter odd on the
second pass, otherwise read_seqbegin_or_lock() never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231117164846.GA10410@redhat.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleg Nesterov [Thu, 30 Nov 2023 11:56:14 +0000 (12:56 +0100)]
afs: fix the usage of read_seqbegin_or_lock() in afs_find_server*()
[ Upstream commit
1702e0654ca9a7bcd7c7619c8a5004db58945b71 ]
David Howells says:
(5) afs_find_server().
There could be a lot of servers in the list and each server can have
multiple addresses, so I think this would be better with an exclusive
second pass.
The server list isn't likely to change all that often, but when it does
change, there's a good chance several servers are going to be
added/removed one after the other. Further, this is only going to be
used for incoming cache management/callback requests from the server,
which hopefully aren't going to happen too often - but it is remotely
drivable.
(6) afs_find_server_by_uuid().
Similarly to (5), there could be a lot of servers to search through, but
they are in a tree not a flat list, so it should be faster to process.
Again, it's not likely to change that often and, again, when it does
change it's likely to involve multiple changes. This can be driven
remotely by an incoming cache management request but is mostly going to
be driven by setting up or reconfiguring a volume's server list -
something that also isn't likely to happen often.
Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock()
never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115614.GA21581@redhat.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleg Nesterov [Thu, 30 Nov 2023 11:56:06 +0000 (12:56 +0100)]
afs: fix the usage of read_seqbegin_or_lock() in afs_lookup_volume_rcu()
[ Upstream commit
4121b4337146b64560d1e46ebec77196d9287802 ]
David Howells says:
(2) afs_lookup_volume_rcu().
There can be a lot of volumes known by a system. A thousand would
require a 10-step walk and this is drivable by remote operation, so I
think this should probably take a lock on the second pass too.
Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock()
never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115606.GA21571@redhat.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Bourgoin [Fri, 15 Dec 2023 11:17:24 +0000 (12:17 +0100)]
crypto: stm32/crc32 - fix parsing list of devices
[ Upstream commit
0eaef675b94c746900dcea7f6c41b9a103ed5d53 ]
smatch warnings:
drivers/crypto/stm32/stm32-crc32.c:108 stm32_crc_get_next_crc() warn:
can 'crc' even be NULL?
Use list_first_entry_or_null instead of list_first_entry to retrieve
the first device registered.
The function list_first_entry always return a non NULL pointer even if
the list is empty. Hence checking if the pointer returned is NULL does
not tell if the list is empty or not.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/
202311281111.ou2oUL2i-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/
202311281111.ou2oUL2i-lkp@intel.com/
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gao Xiang [Thu, 14 Dec 2023 16:13:37 +0000 (00:13 +0800)]
erofs: fix ztailpacking for subpage compressed blocks
[ Upstream commit
e5aba911dee5e20fa82efbe13e0af8f38ea459e7 ]
`pageofs_in` should be the compressed data offset of the page rather
than of the block.
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231214161337.753049-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bharat Bhushan [Mon, 11 Dec 2023 10:29:11 +0000 (15:59 +0530)]
crypto: octeontx2 - Fix cptvf driver cleanup
[ Upstream commit
c480a421a4faf693c38e60b0fe6e554c9a3fee02 ]
This patch fixes following cleanup issues:
- Missing instruction queue free on cleanup. This
will lead to memory leak.
- lfs->lfs_num is set to zero before cleanup, which
will lead to improper cleanup.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia Jie Ho [Mon, 4 Dec 2023 03:04:13 +0000 (11:04 +0800)]
crypto: starfive - Fix dev_err_probe return error
[ Upstream commit
8517c34e87025b3f74f3c07813d493828f369598 ]
Current dev_err_probe will return 0 instead of proper error code if
driver failed to get irq number. Fix the return code.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gao Xiang [Wed, 6 Dec 2023 09:10:55 +0000 (17:10 +0800)]
erofs: fix up compacted indexes for block size < 4096
[ Upstream commit
8d2517aaeea3ab8651bb517bca8f3c8664d318ea ]
Previously, the block size always equaled to PAGE_SIZE, therefore
`lclusterbits` couldn't be less than 12.
Since sub-page compressed blocks are now considered, `lobits` for
a lcluster in each pack cannot always be `lclusterbits` as before.
Otherwise, there is no enough room for the special value
`Z_EROFS_LI_D0_CBLKCNT`.
To support smaller block sizes, `lobits` for each compacted lcluster is
now calculated as:
lobits = max(lclusterbits, ilog2(Z_EROFS_LI_D0_CBLKCNT) + 1)
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-4-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Weichen Chen [Fri, 24 Feb 2023 02:36:32 +0000 (10:36 +0800)]
pstore/ram: Fix crash when setting number of cpus to an odd number
[ Upstream commit
d49270a04623ce3c0afddbf3e984cb245aa48e9c ]
When the number of cpu cores is adjusted to 7 or other odd numbers,
the zone size will become an odd number.
The address of the zone will become:
addr of zone0 = BASE
addr of zone1 = BASE + zone_size
addr of zone2 = BASE + zone_size*2
...
The address of zone1/3/5/7 will be mapped to non-alignment va.
Eventually crashes will occur when accessing these va.
So, use ALIGN_DOWN() to make sure the zone size is even
to avoid this bug.
Signed-off-by: Weichen Chen <weichen.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20230224023632.6840-1-weichen.chen@mediatek.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Tue, 21 Nov 2023 18:52:44 +0000 (12:52 -0600)]
crypto: p10-aes-gcm - Avoid -Wstringop-overflow warnings
[ Upstream commit
aaa03fdb56c781db4a4831dd5d6ec8817918c726 ]
The compiler doesn't know that `32` is an offset into the Hash table:
56 struct Hash_ctx {
57 u8 H[16]; /* subkey */
58 u8 Htable[256]; /* Xi, Hash table(offset 32) */
59 };
So, it legitimately complains about a potential out-of-bounds issue
if `256 bytes` are accessed in `htable` (this implies going
`32 bytes` beyond the boundaries of `Htable`):
arch/powerpc/crypto/aes-gcm-p10-glue.c: In function 'gcmp10_init':
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: error: 'gcm_init_htable' accessing 256 bytes in a region of size 224 [-Werror=stringop-overflow=]
120 | gcm_init_htable(hash->Htable+32, hash->H);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 1 of type 'unsigned char[256]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 2 of type 'unsigned char[16]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:40:17: note: in a call to function 'gcm_init_htable'
40 | asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
| ^~~~~~~~~~~~~~~
Address this by avoiding specifying the size of `htable` in the function
prototype; and just for consistency, do the same for parameter `Xi`.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/
20231121131903.
68a37932@canb.auug.org.au/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia Jie Ho [Mon, 20 Nov 2023 15:11:21 +0000 (23:11 +0800)]
hwrng: starfive - Fix dev_err_probe return error
[ Upstream commit
2d37b3649c412b3bcecfea932cb677f7a5775b15 ]
Current dev_err_probe will return 0 instead of proper error code if
driver failed to get irq number. Fix the return err code.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/
202311160649.3GhKCfhd-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Adam Davis [Tue, 31 Oct 2023 05:39:04 +0000 (13:39 +0800)]
jfs: fix uaf in jfs_evict_inode
[ Upstream commit
e0e1958f4c365e380b17ccb35617345b31ef7bf3 ]
When the execution of diMount(ipimap) fails, the object ipimap that has been
released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs
when rcu_core() calls jfs_free_node().
Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as
ipimap.
Reported-and-tested-by: syzbot+01cf2dbcbe2022454388@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manas Ghandat [Tue, 17 Oct 2023 12:03:56 +0000 (17:33 +0530)]
jfs: fix array-index-out-of-bounds in dbAdjTree
[ Upstream commit
74ecdda68242b174920fe7c6133a856fb7d8559b ]
Currently there is a bound check missing in the dbAdjTree while
accessing the dmt_stree. To add the required check added the bool is_ctl
which is required to determine the size as suggest in the following
commit.
https://lore.kernel.org/linux-kernel-mentees/
f9475918-2186-49b8-b801-
6f0f9e75f4fa@oracle.com/
Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
39ba34a099ac2e9bd3cb
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manas Ghandat [Wed, 25 Oct 2023 06:09:07 +0000 (11:39 +0530)]
jfs: fix slab-out-of-bounds Read in dtSearch
[ Upstream commit
fa5492ee89463a7590a1449358002ff7ef63529f ]
Currently while searching for current page in the sorted entry table
of the page there is a out of bound access. Added a bound check to fix
the error.
Dave:
Set return code to -EIO
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/
202310241724.Ed02yUz9-lkp@intel.com/
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Osama Muhammad [Fri, 13 Oct 2023 19:10:28 +0000 (00:10 +0500)]
UBSAN: array-index-out-of-bounds in dtSplitRoot
[ Upstream commit
27e56f59bab5ddafbcfe69ad7a4a6ea1279c1b16 ]
Syzkaller reported the following issue:
oop0: detected capacity change from 0 to 32768
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9
index -2 is out of range for type 'struct dtslot [128]'
CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283
dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971
dtSplitUp fs/jfs/jfs_dtree.c:985 [inline]
dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863
jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270
vfs_mkdir+0x3b3/0x590 fs/namei.c:4013
do_mkdirat+0x279/0x550 fs/namei.c:4038
__do_sys_mkdirat fs/namei.c:4053 [inline]
__se_sys_mkdirat fs/namei.c:4051 [inline]
__x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fcdc0113fd9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffeb8bc67d8 EFLAGS:
00000246 ORIG_RAX:
0000000000000102
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fcdc0113fd9
RDX:
0000000000000000 RSI:
0000000020000340 RDI:
0000000000000003
RBP:
00007fcdc00d37a0 R08:
0000000000000000 R09:
00007fcdc00d37a0
R10:
00005555559a72c0 R11:
0000000000000246 R12:
00000000f8008000
R13:
0000000000000000 R14:
00083878000000f8 R15:
0000000000000000
</TASK>
The issue is caused when the value of fsi becomes less than -1.
The check to break the loop when fsi value becomes -1 is present
but syzbot was able to produce value less than -1 which cause the error.
This patch simply add the change for the values less than 0.
The patch is tested via syzbot.
Reported-and-tested-by: syzbot+d4b1df2e9d4ded6488ec@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d4b1df2e9d4ded6488ec
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Osama Muhammad [Wed, 11 Oct 2023 18:46:37 +0000 (23:46 +0500)]
FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree
[ Upstream commit
9862ec7ac1cbc6eb5ee4a045b5d5b8edbb2f7e68 ]
Syzkaller reported the following issue:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6
index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]')
CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867
dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834
dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331
dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline]
dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402
txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534
txUpdateMap+0x342/0x9e0
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732
kthread+0x2d3/0x370 kernel/kthread.c:388
ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
================================================================================
Kernel panic - not syncing: UBSAN: panic_on_warn set ...
CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
panic+0x30f/0x770 kernel/panic.c:340
check_panic_on_warn+0x82/0xa0 kernel/panic.c:236
ubsan_epilogue lib/ubsan.c:223 [inline]
__ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348
dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867
dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834
dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331
dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline]
dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402
txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534
txUpdateMap+0x342/0x9e0
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732
kthread+0x2d3/0x370 kernel/kthread.c:388
ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
Kernel Offset: disabled
Rebooting in 86400 seconds..
The issue is caused when the value of lp becomes greater than
CTLTREESIZE which is the max size of stree. Adding a simple check
solves this issue.
Dave:
As the function returns a void, good error handling
would require a more intrusive code reorganization, so I modified
Osama's patch at use WARN_ON_ONCE for lack of a cleaner option.
The patch is tested via syzbot.
Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=39ba34a099ac2e9bd3cb
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Mon, 18 Dec 2023 19:25:02 +0000 (20:25 +0100)]
thermal: core: Fix thermal zone suspend-resume synchronization
[ Upstream commit
4e814173a8c4f432fd068b1c796f0416328c9d99 ]
There are 3 synchronization issues with thermal zone suspend-resume
during system-wide transitions:
1. The resume code runs in a PM notifier which is invoked after user
space has been thawed, so it can run concurrently with user space
which can trigger a thermal zone device removal. If that happens,
the thermal zone resume code may use a stale pointer to the next
list element and crash, because it does not hold thermal_list_lock
while walking thermal_tz_list.
2. The thermal zone resume code calls thermal_zone_device_init()
outside the zone lock, so user space or an update triggered by
the platform firmware may see an inconsistent state of a
thermal zone leading to unexpected behavior.
3. Clearing the in_suspend global variable in thermal_pm_notify()
allows __thermal_zone_device_update() to continue for all thermal
zones and it may as well run before the thermal_tz_list walk (or
at any point during the list walk for that matter) and attempt to
operate on a thermal zone that has not been resumed yet. It may
also race destructively with thermal_zone_device_init().
To address these issues, add thermal_list_lock locking to
thermal_pm_notify(), especially arount the thermal_tz_list,
make it call thermal_zone_device_init() back-to-back with
__thermal_zone_device_update() under the zone lock and replace
in_suspend with per-zone bool "suspend" indicators set and unset
under the given zone's lock.
Link: https://lore.kernel.org/linux-pm/20231218162348.69101-1-bo.ye@mediatek.com/
Reported-by: Bo Ye <bo.ye@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuai Xue [Mon, 18 Dec 2023 06:45:18 +0000 (14:45 +0800)]
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
[ Upstream commit
a70297d2213253853e95f5b49651f924990c6d3b ]
There are two major types of uncorrected recoverable (UCR) errors :
- Synchronous error: The error is detected and raised at the point of
the consumption in the execution flow, e.g. when a CPU tries to
access a poisoned cache line. The CPU will take a synchronous error
exception such as Synchronous External Abort (SEA) on Arm64 and
Machine Check Exception (MCE) on X86. OS requires to take action (for
example, offline failure page/kill failure thread) to recover this
uncorrectable error.
- Asynchronous error: The error is detected out of processor execution
context, e.g. when an error is detected by a background scrubber.
Some data in the memory are corrupted. But the data have not been
consumed. OS is optional to take action to recover this uncorrectable
error.
When APEI firmware first is enabled, a platform may describe one error
source for the handling of synchronous errors (e.g. MCE or SEA notification
), or for handling asynchronous errors (e.g. SCI or External Interrupt
notification). In other words, we can distinguish synchronous errors by
APEI notification. For synchronous errors, kernel will kill the current
process which accessing the poisoned page by sending SIGBUS with
BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the
process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in
early kill mode. However, the GHES driver always sets mf_flags to 0 so that
all synchronous errors are handled as asynchronous errors in memory failure.
To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous
events.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Tested-by: Ma Wupeng <mawupeng1@huawei.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mukesh Ojha [Fri, 24 Nov 2023 21:11:58 +0000 (02:41 +0530)]
PM / devfreq: Synchronize devfreq_monitor_[start/stop]
[ Upstream commit
aed5ed595960c6d301dcd4ed31aeaa7a8054c0c6 ]
There is a chance if a frequent switch of the governor
done in a loop result in timer list corruption where
timer cancel being done from two place one from
cancel_delayed_work_sync() and followed by expire_timers()
can be seen from the traces[1].
while true
do
echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor
echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor
done
It looks to be issue with devfreq driver where
device_monitor_[start/stop] need to synchronized so that
delayed work should get corrupted while it is either
being queued or running or being cancelled.
Let's use polling flag and devfreq lock to synchronize the
queueing the timer instance twice and work data being
corrupted.
[1]
...
..
<idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428
<idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c
<idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428
kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=
182452227
vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428
vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428
vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=
186646532
vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428
xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428
[2]
9436.261653][ C4] Unable to handle kernel paging request at virtual address
dead00000000012a
[ 9436.261664][ C4] Mem abort info:
[ 9436.261666][ C4] ESR = 0x96000044
[ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9436.261671][ C4] SET = 0, FnV = 0
[ 9436.261673][ C4] EA = 0, S1PTW = 0
[ 9436.261675][ C4] Data abort info:
[ 9436.261677][ C4] ISV = 0, ISS = 0x00000044
[ 9436.261680][ C4] CM = 0, WnR = 1
[ 9436.261682][ C4] [
dead00000000012a] address between user and kernel address ranges
[ 9436.261685][ C4] Internal error: Oops:
96000044 [#1] PREEMPT SMP
[ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0
...
[ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1
[ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT)
[ 9436.262144][ C4] pstate:
22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--)
[ 9436.262161][ C4] pc : expire_timers+0x9c/0x438
[ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438
[ 9436.262168][ C4] sp :
ffffffc010023dd0
[ 9436.262171][ C4] x29:
ffffffc010023df0 x28:
ffffffd0636fdc18
[ 9436.262178][ C4] x27:
ffffffd063569dd0 x26:
ffffffd063536008
[ 9436.262182][ C4] x25:
0000000000000001 x24:
ffffff88f7c69280
[ 9436.262185][ C4] x23:
00000000000000e0 x22:
dead000000000122
[ 9436.262188][ C4] x21:
000000010022da29 x20:
ffffff8af72b4e80
[ 9436.262191][ C4] x19:
ffffffc010023e50 x18:
ffffffc010025038
[ 9436.262195][ C4] x17:
0000000000000240 x16:
0000000000000201
[ 9436.262199][ C4] x15:
ffffffffffffffff x14:
ffffff889f3c3100
[ 9436.262203][ C4] x13:
ffffff889f3c3100 x12:
00000000049f56b8
[ 9436.262207][ C4] x11:
00000000049f56b8 x10:
00000000ffffffff
[ 9436.262212][ C4] x9 :
ffffffc010023e50 x8 :
dead000000000122
[ 9436.262216][ C4] x7 :
ffffffffffffffff x6 :
ffffffc0100239d8
[ 9436.262220][ C4] x5 :
0000000000000000 x4 :
0000000000000101
[ 9436.262223][ C4] x3 :
0000000000000080 x2 :
ffffff889edc155c
[ 9436.262227][ C4] x1 :
ffffff8001005200 x0 :
ffffff80444f0428
[ 9436.262232][ C4] Call trace:
[ 9436.262236][ C4] expire_timers+0x9c/0x438
[ 9436.262240][ C4] __run_timers+0x1f0/0x330
[ 9436.262245][ C4] run_timer_softirq+0x28/0x58
[ 9436.262255][ C4] efi_header_end+0x168/0x5ec
[ 9436.262265][ C4] __irq_exit_rcu+0x108/0x124
[ 9436.262274][ C4] __handle_domain_irq+0x118/0x1e4
[ 9436.262282][ C4] gic_handle_irq.30369+0x6c/0x2bc
[ 9436.262286][ C4] el0_irq_naked+0x60/0x6c
Link: https://lore.kernel.org/all/1700860318-4025-1-git-send-email-quic_mojha@quicinc.com/
Reported-by: Joyyoung Huang <huangzaiyang@oppo.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rae Moar [Thu, 7 Dec 2023 21:34:09 +0000 (21:34 +0000)]
kunit: tool: fix parsing of test attributes
[ Upstream commit
8ae27bc7fff4ef467a7964821a6cedb34a05d3b2 ]
Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.
Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuntao Wang [Wed, 6 Dec 2023 10:43:18 +0000 (18:43 +0800)]
ACPI: NUMA: Fix the logic of getting the fake_pxm value
[ Upstream commit
e3f577830ce216b0ca21d4750cbbd64cfc21efff ]
The for loop does not iterate over the last element of the node_to_pxm_map
array. This could lead to a conflict between the final fake_pxm value and
the existing pxm values. That is, the final fake_pxm value can not be
guaranteed to be an unused pxm value.
While at it, fix up white space in slit_valid().
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Weißschuh [Sun, 5 Nov 2023 14:16:38 +0000 (15:16 +0100)]
selftests/nolibc: fix testcase status alignment
[ Upstream commit
07f679b50252dc9e3d0c19aca5801f82c230c527 ]
Center-align all possible status reports.
Before OK and FAIL were center-aligned in relation to each other but
SKIPPED and FAILED would be left-aligned.
Before:
7 environ_addr = <0x7fffef3e7c50> [OK]
8 environ_envp = <0x7fffef3e7c58> [FAIL]
9 environ_auxv [SKIPPED]
10 environ_total [SKIPPED]
11 environ_HOME = <0x7fffef3e99bd> [OK]
12 auxv_addr [SKIPPED]
13 auxv_AT_UID = 1000 [OK]
After:
7 environ_addr = <0x7ffff13b00a0> [OK]
8 environ_envp = <0x7ffff13b00a8> [FAIL]
9 environ_auxv [SKIPPED]
10 environ_total [SKIPPED]
11 environ_HOME = <0x7ffff13b19bd> [OK]
12 auxv_addr [SKIPPED]
13 auxv_AT_UID = 1000 [OK]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prarit Bhargava [Mon, 4 Dec 2023 18:00:37 +0000 (13:00 -0500)]
ACPI: extlog: fix NULL pointer dereference check
[ Upstream commit
72d9b9747e78979510e9aafdd32eb99c7aa30dd1 ]
The gcc plugin -fanalyzer [1] tries to detect various
patterns of incorrect behaviour. The tool reports:
drivers/acpi/acpi_extlog.c: In function ‘extlog_exit’:
drivers/acpi/acpi_extlog.c:307:12: warning: check of ‘extlog_l1_addr’ for NULL after already dereferencing it [-Wanalyzer-deref-before-check]
|
| 306 | ((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN;
| | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
| | |
| | (1) pointer ‘extlog_l1_addr’ is dereferenced here
| 307 | if (extlog_l1_addr)
| | ~
| | |
| | (2) pointer ‘extlog_l1_addr’ is checked for NULL here but it was already dereferenced at (1)
|
Fix the NULL pointer dereference check in extlog_exit().
Link: https://gcc.gnu.org/onlinedocs/gcc-10.1.0/gcc/Static-Analyzer-Options.html
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Antipov [Tue, 28 Nov 2023 02:52:10 +0000 (05:52 +0300)]
PNP: ACPI: fix fortify warning
[ Upstream commit
ba3f5058db437d919f8468db50483dd9028ff688 ]
When compiling with gcc version 14.0.0
20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:7,
from ./include/linux/slab.h:16,
from ./include/linux/resource_ext.h:11,
from ./include/linux/acpi.h:13,
from drivers/pnp/pnpacpi/rsparser.c:11:
In function 'fortify_memcpy_chk',
inlined from 'pnpacpi_parse_allocated_vendor' at drivers/pnp/pnpacpi/rsparser.c:158:3,
inlined from 'pnpacpi_allocated_resource' at drivers/pnp/pnpacpi/rsparser.c:249:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
According to the comments in include/linux/fortify-string.h, 'memcpy()',
'memmove()' and 'memset()' must not be used beyond individual struct
members to ensure that the compiler can enforce protection against
buffer overflows, and, IIUC, this also applies to partial copies from
the particular member ('vendor->byte_data' in this case). So it should
be better (and safer) to do both copies at once (and 'byte_data' of
'struct acpi_resource_vendor_typed' seems to be a good candidate for
'__counted_by(byte_length)' as well).
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuluo Qiu [Sun, 26 Nov 2023 13:59:13 +0000 (21:59 +0800)]
ACPI: video: Add quirk for the Colorful X15 AT 23 Laptop
[ Upstream commit
143176a46bdd3bfbe9ba2462bf94458e80d65ebf ]
The Colorful X15 AT 23 ACPI video-bus device report spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there) when
an external screen plugged in.
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
Signed-off-by: Yuluo Qiu <qyl27@outlook.com>
Co-developed-by: Celeste Liu <CoelacanthusHex@gmail.com>
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Riches [Wed, 18 Oct 2023 09:23:51 +0000 (09:23 +0000)]
audit: Send netlink ACK before setting connection in auditd_set
[ Upstream commit
022732e3d846e197539712e51ecada90ded0572a ]
When auditd_set sets the auditd_conn pointer, audit messages can
immediately be put on the socket by other kernel threads. If the backlog
is large or the rate is high, this can immediately fill the socket
buffer. If the audit daemon requested an ACK for this operation, a full
socket buffer causes the ACK to get dropped, also setting ENOBUFS on the
socket.
To avoid this race and ensure ACKs get through, fast-track the ACK in
this specific case to ensure it is sent before auditd_conn is set.
Signed-off-by: Chris Riches <chris.riches@nutanix.com>
[PM: fix some tab vs space damage]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rui Zhang [Fri, 3 Nov 2023 07:42:31 +0000 (15:42 +0800)]
regulator: core: Only increment use_count when enable_count changes
[ Upstream commit
7993d3a9c34f609c02171e115fd12c10e2105ff4 ]
The use_count of a regulator should only be incremented when the
enable_count changes from 0 to 1. Similarly, the use_count should
only be decremented when the enable_count changes from 1 to 0.
In the previous implementation, use_count was sometimes decremented
to 0 when some consumer called unbalanced disable,
leading to unexpected disable even the regulator is enabled by
other consumers. With this change, the use_count accurately reflects
the number of users which the regulator is enabled.
This should make things more robust in the case where a consumer does
leak references.
Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20231103074231.8031-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrzej Hajda [Wed, 25 Oct 2023 21:39:07 +0000 (23:39 +0200)]
debugobjects: Stop accessing objects after releasing hash bucket lock
[ Upstream commit
9bb6362652f3f4d74a87d572a91ee1b38e673ef6 ]
After release of the hashbucket lock the tracking object can be modified or
freed by a concurrent thread. Using it in such a case is error prone, even
for printing the object state:
1. T1 tries to deactivate destroyed object, debugobjects detects it,
hash bucket lock is released.
2. T2 preempts T1 and frees the tracking object.
3. The freed tracking object is allocated and initialized for a
different to be tracked kernel object.
4. T1 resumes and reports error for wrong kernel object.
Create a local copy of the tracking object before releasing the hash bucket
lock and use the local copy for reporting and fixups to prevent this.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231025-debugobjects_fix-v3-1-2bc3bf7084c2@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg KH [Mon, 12 Jun 2023 13:09:09 +0000 (15:09 +0200)]
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
[ Upstream commit
652ffc2104ec1f69dd4a46313888c33527145ccf ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/2023061204-decal-flyable-6090@gregkh
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhiquan Li [Thu, 26 Oct 2023 00:39:03 +0000 (08:39 +0800)]
x86/mce: Mark fatal MCE's page as poison to avoid panic in the kdump kernel
[ Upstream commit
9f3b130048bfa2e44a8cfb1b616f826d9d5d8188 ]
Memory errors don't happen very often, especially fatal ones. However,
in large-scale scenarios such as data centers, that probability
increases with the amount of machines present.
When a fatal machine check happens, mce_panic() is called based on the
severity grading of that error. The page containing the error is not
marked as poison.
However, when kexec is enabled, tools like makedumpfile understand when
pages are marked as poison and do not touch them so as not to cause
a fatal machine check exception again while dumping the previous
kernel's memory.
Therefore, mark the page containing the error as poisoned so that the
kexec'ed kernel can avoid accessing the page.
[ bp: Rewrite commit message and comment. ]
Co-developed-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Link: https://lore.kernel.org/r/20231014051754.3759099-1-zhiquan1.li@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Naveen N Rao [Thu, 23 Nov 2023 07:17:05 +0000 (12:47 +0530)]
powerpc/lib: Validate size for vector operations
[ Upstream commit
8f9abaa6d7de0a70fc68acaedce290c1f96e2e59 ]
Some of the fp/vmx code in sstep.c assume a certain maximum size for the
instructions being emulated. The size of those operations however is
determined separately in analyse_instr().
Add a check to validate the assumption on the maximum size of the
operations, so as to prevent any unintended kernel stack corruption.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Rothwell [Mon, 27 Nov 2023 02:28:09 +0000 (13:28 +1100)]
powerpc: pmd_move_must_withdraw() is only needed for CONFIG_TRANSPARENT_HUGEPAGE
[ Upstream commit
0d555b57ee660d8a871781c0eebf006e855e918d ]
The linux-next build of powerpc64 allnoconfig fails with:
arch/powerpc/mm/book3s64/pgtable.c:557:5: error: no previous prototype for 'pmd_move_must_withdraw'
557 | int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
| ^~~~~~~~~~~~~~~~~~~~~~
Caused by commit:
c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Fix it by moving the function definition under
CONFIG_TRANSPARENT_HUGEPAGE like the prototype. The function is only
called when CONFIG_TRANSPARENT_HUGEPAGE=y.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Flesh out change log from linux-next patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127132809.45c2b398@canb.auug.org.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jun'ichi Nomura [Wed, 29 Nov 2023 20:44:49 +0000 (15:44 -0500)]
x86/boot: Ignore NMIs during very early boot
[ Upstream commit
78a509fba9c9b1fcb77f95b7c6be30da3d24823a ]
When there are two racing NMIs on x86, the first NMI invokes NMI handler and
the 2nd NMI is latched until IRET is executed.
If panic on NMI and panic kexec are enabled, the first NMI triggers
panic and starts booting the next kernel via kexec. Note that the 2nd
NMI is still latched. During the early boot of the next kernel, once
an IRET is executed as a result of a page fault, then the 2nd NMI is
unlatched and invokes the NMI handler.
However, NMI handler is not set up at the early stage of boot, which
results in a boot failure.
Avoid such problems by setting up a NOP handler for early NMIs.
[ mingo: Refined the changelog. ]
Signed-off-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Derek Barbosa <debarbos@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Wed, 29 Nov 2023 13:19:19 +0000 (00:19 +1100)]
powerpc/64s: Fix CONFIG_NUMA=n build due to create_section_mapping()
[ Upstream commit
ede66cd22441820cbd399936bf84fdc4294bc7fa ]
With CONFIG_NUMA=n the build fails with:
arch/powerpc/mm/book3s64/pgtable.c:275:15: error: no previous prototype for ‘create_section_mapping’ [-Werror=missing-prototypes]
275 | int __meminit create_section_mapping(unsigned long start, unsigned long end,
| ^~~~~~~~~~~~~~~~~~~~~~
That happens because the prototype for create_section_mapping() is in
asm/mmzone.h, but asm/mmzone.h is only included by linux/mmzone.h
when CONFIG_NUMA=y.
In fact the prototype is only needed by arch/powerpc/mm code, so move
the prototype into arch/powerpc/mm/mmu_decl.h, which also fixes the
build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-5-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Thu, 30 Nov 2023 11:44:32 +0000 (22:44 +1100)]
powerpc/mm: Fix build failures due to arch_reserved_kernel_pages()
[ Upstream commit
d8c3f243d4db24675b653f0568bb65dae34e6455 ]
With NUMA=n and FA_DUMP=y or PRESERVE_FA_DUMP=y the build fails with:
arch/powerpc/kernel/fadump.c:1739:22: error: no previous prototype for ‘arch_reserved_kernel_pages’ [-Werror=missing-prototypes]
1739 | unsigned long __init arch_reserved_kernel_pages(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
The prototype for arch_reserved_kernel_pages() is in include/linux/mm.h,
but it's guarded by __HAVE_ARCH_RESERVED_KERNEL_PAGES. The powerpc
headers define __HAVE_ARCH_RESERVED_KERNEL_PAGES in asm/mmzone.h, which
is not included into the generic headers when NUMA=n.
Move the definition of __HAVE_ARCH_RESERVED_KERNEL_PAGES into asm/mmu.h
which is included regardless of NUMA=n.
Additionally the ifdef around __HAVE_ARCH_RESERVED_KERNEL_PAGES needs to
also check for CONFIG_PRESERVE_FA_DUMP.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Thu, 30 Nov 2023 11:44:33 +0000 (22:44 +1100)]
powerpc: Fix build error due to is_valid_bugaddr()
[ Upstream commit
f8d3555355653848082c351fa90775214fb8a4fa ]
With CONFIG_GENERIC_BUG=n the build fails with:
arch/powerpc/kernel/traps.c:1442:5: error: no previous prototype for ‘is_valid_bugaddr’ [-Werror=missing-prototypes]
1442 | int is_valid_bugaddr(unsigned long addr)
| ^~~~~~~~~~~~~~~~
The prototype is only defined, and the function is only needed, when
CONFIG_GENERIC_BUG=y, so move the implementation under that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Mon, 4 Dec 2023 11:58:47 +0000 (11:58 +0000)]
drivers/perf: pmuv3: don't expose SW_INCR event in sysfs
[ Upstream commit
ca6f537e459e2da4b331fe8928d1a0b0f9301f42 ]
The SW_INCR event is somewhat unusual, and depends on the specific HW
counter that it is programmed into. When programmed into PMEVCNTR<n>,
SW_INCR will count any writes to PMSWINC_EL0 with bit n set, ignoring
writes to SW_INCR with bit n clear.
Event rotation means that there's no fixed relationship between
perf_events and HW counters, so this isn't all that useful.
Further, we program PMUSERENR.{SW,EN}=={0,0}, which causes EL0 writes to
PMSWINC_EL0 to be trapped and handled as UNDEFINED, resulting in a
SIGILL to userspace.
Given that, it's not a good idea to expose SW_INCR in sysfs. Hide it as
we did for CHAIN back in commit:
4ba2578fa7b55701 ("arm64: perf: don't expose CHAIN event in sysfs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231204115847.2993026-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huang Shijie [Fri, 24 Nov 2023 03:15:13 +0000 (11:15 +0800)]
arm64: irq: set the correct node for VMAP stack
[ Upstream commit
75b5e0bf90bffaca4b1f19114065dc59f5cc161f ]
In current code, init_irq_stacks() will call cpu_to_node().
The cpu_to_node() depends on percpu "numa_node" which is initialized in:
arch_call_rest_init() --> rest_init() -- kernel_init()
--> kernel_init_freeable() --> smp_prepare_cpus()
But init_irq_stacks() is called in init_IRQ() which is before
arch_call_rest_init().
So in init_irq_stacks(), the cpu_to_node() does not work, it
always return 0. In NUMA, it makes the node 1 cpu accesses the IRQ stack which
is in the node 0.
This patch fixes it by:
1.) export the early_cpu_to_node(), and use it in the init_irq_stacks().
2.) change init_irq_stacks() to __init function.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231124031513.81548-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunwu Chan [Mon, 4 Dec 2023 02:32:23 +0000 (10:32 +0800)]
powerpc/mm: Fix null-pointer dereference in pgtable_cache_add
[ Upstream commit
f46c8a75263f97bda13c739ba1c90aced0d3b071 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231204023223.2447523-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Mon, 8 Jan 2024 06:16:45 +0000 (22:16 -0800)]
asm-generic: make sparse happy with odd-sized put_unaligned_*()
[ Upstream commit
1ab33c03145d0f6c345823fc2da935d9a1a9e9fc ]
__put_unaligned_be24() and friends use implicit casts to convert
larger-sized data to bytes, which trips sparse truncation warnings when
the argument is a constant:
CC [M] drivers/input/touchscreen/hynitron_cstxxx.o
CHECK drivers/input/touchscreen/hynitron_cstxxx.c
drivers/input/touchscreen/hynitron_cstxxx.c: note: in included file (through arch/x86/include/generated/asm/unaligned.h):
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (aa01a0 becomes a0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (aa01 becomes 1)
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (ab00d0 becomes d0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (ab00 becomes 0)
To avoid this let's mask off upper bits explicitly, the resulting code
should be exactly the same, but it will keep sparse happy.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/oe-kbuild-all/
202401070147.gqwVulOn-lkp@intel.com/
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Gray [Tue, 12 Sep 2023 06:07:56 +0000 (16:07 +1000)]
Documentation/sphinx: fix Python string escapes
commit
86a0adc029d338f0da8989e7bb453c1114d51960 upstream.
Python 3.6 introduced a DeprecationWarning for invalid escape sequences.
This is upgraded to a SyntaxWarning in Python 3.12, and will eventually
be a syntax error.
Fix these now to get ahead of it before it's an error.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Message-ID: <
20230912060801.95533-3-bgray@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Justin Forbes <jforbes@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 1 Feb 2024 00:19:14 +0000 (16:19 -0800)]
Linux 6.6.15
Link: https://lore.kernel.org/r/20240129170014.969142961@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Wed, 11 Oct 2023 15:45:42 +0000 (17:45 +0200)]
thermal: trip: Drop lockdep assertion from thermal_zone_trip_id()
commit
108ffd12be24ba1d74b3314df8db32a0a6d55ba5 upstream.
The lockdep assertion in thermal_zone_trip_id() triggers when the
trip point sysfs attribute of a thermal instance is read, because
there is no thermal zone locking in that code path.
This is not verly useful, though, because there is no mechanism by which
the location of the trips[] table in a thermal zone or its size can
change after binding cooling devices to the trips in that thermal
zone and before those cooling devices are unbound from them. Thus
it is not in fact necessary to hold the thermal zone lock when
thermal_zone_trip_id() is called from trip_point_show() and so the
lockdep asserion in the former is invalid.
Accordingly, drop that lockdep assertion.
Fixes:
2c7b4bfadef0 ("thermal: core: Store trip pointer in struct thermal_instance")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Wed, 27 Sep 2023 04:41:28 +0000 (21:41 -0700)]
serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
commit
29bff582b74ed0bdb7e6986482ad9e6799ea4d2f upstream.
Fix the function name to avoid a kernel-doc warning:
include/linux/serial_core.h:666: warning: expecting prototype for uart_port_lock_irqrestore(). Prototype was for uart_port_unlock_irqrestore() instead
Fixes:
b0af4bcb4946 ("serial: core: Provide port lock wrappers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230927044128.4748-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Palethorpe [Wed, 10 Jan 2024 13:01:22 +0000 (15:01 +0200)]
x86/entry/ia32: Ensure s32 is sign extended to s64
commit
56062d60f117dccfb5281869e0ab61e090baf864 upstream.
Presently ia32 registers stored in ptregs are unconditionally cast to
unsigned int by the ia32 stub. They are then cast to long when passed to
__se_sys*, but will not be sign extended.
This takes the sign of the syscall argument into account in the ia32
stub. It still casts to unsigned int to avoid implementation specific
behavior. However then casts to int or unsigned int as necessary. So that
the following cast to long sign extends the value.
This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently
the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the
maximum number of events.
It doesn't appear other systemcalls with signed arguments are effected
because they all have compat variants defined and wired up.
Fixes:
ebeb8c82ffaf ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com
Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Chen [Mon, 22 Jan 2024 23:35:34 +0000 (15:35 -0800)]
tick/sched: Preserve number of idle sleeps across CPU hotplug events
commit
9a574ea9069be30b835a3da772c039993c43369b upstream.
Commit
71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs
CPU hotplug") preserved total idle sleep time and iowait sleeptime across
CPU hotplug events.
Similar reasoning applies to the number of idle calls and idle sleeps to
get the proper average of sleep time per idle invocation.
Preserve those fields too.
Fixes:
71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug")
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240122233534.3094238-1-tim.c.chen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Wiesner [Mon, 22 Jan 2024 17:23:50 +0000 (18:23 +0100)]
clocksource: Skip watchdog check for large watchdog intervals
commit
644649553508b9bacf0fc7a5bdc4f9e0165576a5 upstream.
There have been reports of the watchdog marking clocksources unstable on
machines with 8 NUMA nodes:
clocksource: timekeeping watchdog on CPU373:
Marking clocksource 'tsc' as unstable because the skew is too large:
clocksource: 'hpet' wd_nsec:
14523447520
clocksource: 'tsc' cs_nsec:
14524115132
The measured clocksource skew - the absolute difference between cs_nsec
and wd_nsec - was 668 microseconds:
cs_nsec - wd_nsec =
14524115132 -
14523447520 = 667612
The kernel used 200 microseconds for the uncertainty_margin of both the
clocksource and watchdog, resulting in a threshold of 400 microseconds (the
md variable). Both the cs_nsec and the wd_nsec value indicate that the
readout interval was circa 14.5 seconds. The observed behaviour is that
watchdog checks failed for large readout intervals on 8 NUMA node
machines. This indicates that the size of the skew was directly proportinal
to the length of the readout interval on those machines. The measured
clocksource skew, 668 microseconds, was evaluated against a threshold (the
md variable) that is suited for readout intervals of roughly
WATCHDOG_INTERVAL, i.e. HZ >> 1, which is 0.5 second.
The intention of
2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold") was to tighten the threshold for evaluating skew and set the
lower bound for the uncertainty_margin of clocksources to twice
WATCHDOG_MAX_SKEW. Later in
c37e85c135ce ("clocksource: Loosen clocksource
watchdog constraints"), the WATCHDOG_MAX_SKEW constant was increased to
125 microseconds to fit the limit of NTP, which is able to use a
clocksource that suffers from up to 500 microseconds of skew per second.
Both the TSC and the HPET use default uncertainty_margin. When the
readout interval gets stretched the default uncertainty_margin is no
longer a suitable lower bound for evaluating skew - it imposes a limit
that is far stricter than the skew with which NTP can deal.
The root causes of the skew being directly proportinal to the length of
the readout interval are:
* the inaccuracy of the shift/mult pairs of clocksources and the watchdog
* the conversion to nanoseconds is imprecise for large readout intervals
Prevent this by skipping the current watchdog check if the readout
interval exceeds 2 * WATCHDOG_INTERVAL. Considering the maximum readout
interval of 2 * WATCHDOG_INTERVAL, the current default uncertainty margin
(of the TSC and HPET) corresponds to a limit on clocksource skew of 250
ppm (microseconds of skew per second). To keep the limit imposed by NTP
(500 microseconds of skew per second) for all possible readout intervals,
the margins would have to be scaled so that the threshold value is
proportional to the length of the actual readout interval.
As for why the readout interval may get stretched: Since the watchdog is
executed in softirq context the expiration of the watchdog timer can get
severely delayed on account of a ksoftirqd thread not getting to run in a
timely manner. Surely, a system with such belated softirq execution is not
working well and the scheduling issue should be looked into but the
clocksource watchdog should be able to deal with it accordingly.
Fixes:
2e27e793e280 ("clocksource: Reduce clocksource-skew threshold")
Suggested-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240122172350.GA740@incl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dawei Li [Mon, 22 Jan 2024 08:57:15 +0000 (16:57 +0800)]
genirq: Initialize resend_node hlist for all interrupt descriptors
commit
b184c8c2889ceef0a137c7d0567ef9fe3d92276e upstream.
For a CONFIG_SPARSE_IRQ=n kernel, early_irq_init() is supposed to
initialize all interrupt descriptors.
It does except for irq_desc::resend_node, which ia only initialized for the
first descriptor.
Use the indexed decriptor and not the base pointer to address that.
Fixes:
bc06a9e08742 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240122085716.2999875-5-dawei.li@shingroup.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xi Ruoyao [Fri, 26 Jan 2024 21:05:57 +0000 (05:05 +0800)]
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
commit
59be5c35850171e307ca5d3d703ee9ff4096b948 upstream.
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.
33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Closes: https://lore.kernel.org/linux-mips/
7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Fixes:
9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quanquan Cao [Wed, 24 Jan 2024 09:15:26 +0000 (17:15 +0800)]
cxl/region：Fix overflow issue in alloc_hpa()
commit
d76779dd3681c01a4c6c3cae4d0627c9083e0ee6 upstream.
Creating a region with 16 memory devices caused a problem. The div_u64_rem
function, used for dividing an unsigned 64-bit number by a 32-bit one,
faced an issue when SZ_256M * p->interleave_ways. The result surpassed
the maximum limit of the 32-bit divisor (4G), leading to an overflow
and a remainder of 0.
note: At this point, p->interleave_ways is 16, meaning 16 * 256M = 4G
To fix this issue, I replaced the div_u64_rem function with div64_u64_rem
and adjusted the type of the remainder.
Signed-off-by: Quanquan Cao <caoqq@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Fixes:
23a22cd1c98b ("cxl/region: Allocate HPA capacity to regions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Walle [Mon, 13 Nov 2023 16:43:44 +0000 (17:43 +0100)]
drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
[ Upstream commit
ff3d5d04db07e5374758baa7e877fde8d683ebab ]
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.
The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit
20c827683de0 ("drm: bridge:
samsung-dsim: Fix init during host transfer") and
0c14d3130654 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.
This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.
Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.
Fixes:
20c827683de0 ("drm: bridge: samsung-dsim: Fix init during host transfer")
Fixes:
0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aleksander Jan Bajkowski [Mon, 22 Jan 2024 18:47:09 +0000 (19:47 +0100)]
MIPS: lantiq: register smp_ops on non-smp platforms
[ Upstream commit
4bf2a626dc4bb46f0754d8ac02ec8584ff114ad5 ]
Lantiq uses a common kernel config for devices with 24Kc and 34Kc cores.
The changes made previously to add support for interrupts on all cores
work on 24Kc platforms with SMP disabled and 34Kc platforms with SMP
enabled. This patch fixes boot issues on Danube (single core 24Kc) with
SMP enabled.
Fixes:
730320fd770d ("MIPS: lantiq: enable all hardware interrupts on second VPE")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Lechner [Thu, 25 Jan 2024 20:53:09 +0000 (14:53 -0600)]
spi: fix finalize message on error return
[ Upstream commit
8c2ae772fe08e33f3d7a83849e85539320701abd ]
In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.
This adds the missing call to spi_finalize_current_message().
Fixes:
ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shyam Prasad N [Tue, 23 Jan 2024 05:07:57 +0000 (05:07 +0000)]
cifs: fix stray unlock in cifs_chan_skip_or_disable
[ Upstream commit
993d1c346b1a51ac41b2193609a0d4e51e9748f4 ]
A recent change moved the code that decides to skip
a channel or disable multichannel entirely, into a
helper function.
During this, a mutex_unlock of the session_mutex
should have been removed. Doing that here.
Fixes:
f591062bdbf4 ("cifs: handle servers that still advertise multichannel after disabling")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amit Kumar Mahapatra [Mon, 18 Dec 2023 09:06:52 +0000 (14:36 +0530)]
spi: spi-cadence: Reverse the order of interleaved write and read operations
[ Upstream commit
633cd6fe6e1993ba80e0954c2db127a0b1a3e66f ]
In the existing implementation, when executing interleaved write and read
operations in the ISR for a transfer length greater than the FIFO size,
the TXFIFO write precedes the RXFIFO read. Consequently, the initially
received data in the RXFIFO is pushed out and lost, leading to a failure
in data integrity. To address this issue, reverse the order of interleaved
operations and conduct the RXFIFO read followed by the TXFIFO write.
Fixes:
6afe2ae8dc48 ("spi: spi-cadence: Interleave write of TX and read of RX FIFO")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20231218090652.18403-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kamal Dasu [Tue, 9 Jan 2024 21:00:32 +0000 (16:00 -0500)]
spi: bcm-qspi: fix SFDP BFPT read by usig mspi read
[ Upstream commit
574bf7bbe83794a902679846770f75a9b7f28176 ]
SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
call. This fixes SFDP parameter page read failures seen with parts that
now use SFDP protocol to read the basic flash parameter table.
Fixes:
5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Fri, 19 Jan 2024 11:33:19 +0000 (05:33 -0600)]
cpufreq/amd-pstate: Fix setting scaling max/min freq values
[ Upstream commit
22fb4f041999f5f16ecbda15a2859b4ef4cbf47e ]
Scaling min/max freq values were being cached and lagging a setting
each time. Fix the ordering of the clamp call to ensure they work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Fixes:
febab20caeba ("cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hsin-Yi Wang [Thu, 18 Jan 2024 01:58:14 +0000 (17:58 -0800)]
drm/bridge: anx7625: Ensure bridge is suspended in disable()
[ Upstream commit
4d5b7daa3c610af3f322ad1e91fc0c752ff32f0e ]
Similar to commit
26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.
Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().
Fixes:
3203e497eb76 ("drm/bridge: anx7625: Synchronously run runtime suspend.")
Fixes:
adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118015916.2296741-1-hsinyi@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Lingfeng [Thu, 18 Jan 2024 13:04:01 +0000 (21:04 +0800)]
block: Move checking GENHD_FL_NO_PART to bdev_add_partition()
[ Upstream commit
7777f47f2ea64efd1016262e7b59fab34adfb869 ]
Commit
1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") prevented all operations about partitions on disks
with GENHD_FL_NO_PART in blkpg_do_ioctl() since they are meaningless.
However, it changed error code in some scenarios. So move checking
GENHD_FL_NO_PART to bdev_add_partition() to eliminate impact.
Fixes:
1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Reported-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Closes: https://lore.kernel.org/all/CAOYeF9VsmqKMcQjo1k6YkGNujwN-nzfxY17N3F-CMikE1tYp+w@mail.gmail.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240118130401.792757-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Mon, 22 Jan 2024 12:00:33 +0000 (14:00 +0200)]
spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list
[ Upstream commit
6c314425b9ef6b247cefd0903e287eb072580c3b ]
Turns out this "SoC" side controller does not support certain commands,
such as reading chip JEDEC ID, so the controller is pretty much unusable
in Linux. We should be using the "PCH" side controller instead. For this
reason remove this PCI ID from the list.
Fixes:
c2912d42e86e ("spi: intel-pci: Add support for Meteor Lake-S SPI serial flash")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Artur Weber [Fri, 5 Jan 2024 06:53:01 +0000 (07:53 +0100)]
ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
[ Upstream commit
eab4f56d3e75dad697acf8dc2c8be3c341d6c63e ]
After more investigation, I've found that it's not the panel driver
config that needs to be modified to invert the data polarity, but
the FIMD config.
Add the missing invert-vclk option that is required to get the display
to work correctly.
Fixes:
ee37a457af1d ("ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240105-tab3-display-fixes-v2-1-904d1207bf6f@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenhua Lin [Tue, 9 Jan 2024 07:38:48 +0000 (15:38 +0800)]
gpio: eic-sprd: Clear interrupt after set the interrupt type
[ Upstream commit
84aef4ed59705585d629e81d633a83b7d416f5fb ]
The raw interrupt status of eic maybe set before the interrupt is enabled,
since the eic interrupt has a latch function, which would trigger the
interrupt event once enabled it from user side. To solve this problem,
interrupts generated before setting the interrupt trigger type are ignored.
Fixes:
25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cristian Marussi [Mon, 8 Jan 2024 18:50:50 +0000 (18:50 +0000)]
firmware: arm_scmi: Use xa_insert() when saving raw queues
[ Upstream commit
b5dc0ffd36560dbadaed9a3d9fd7838055d62d74 ]
Use xa_insert() when saving per-channel raw queues to better check for
duplicates.
Fixes:
7860701d1e6e ("firmware: arm_scmi: Add per-channel raw injection support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108185050.1628687-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cristian Marussi [Mon, 8 Jan 2024 18:50:49 +0000 (18:50 +0000)]
firmware: arm_scmi: Use xa_insert() to store opps
[ Upstream commit
e8ef4bbe39b9576a73f104f6af743fb9c7b624ba ]
When storing opps by level or index use xa_insert() instead of xa_store()
and add error-checking to spot bad duplicates indexes possibly wrongly
provided by the platform firmware.
Fixes:
31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108185050.1628687-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fedor Pchelkin [Wed, 20 Dec 2023 09:53:15 +0000 (12:53 +0300)]
drm/exynos: gsc: minor fix for loop iteration in gsc_runtime_resume
[ Upstream commit
4050957c7c2c14aa795dbf423b4180d5ac04e113 ]
Do not forget to call clk_disable_unprepare() on the first element of
ctx->clocks array.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
8b7d3ec83aba ("drm/exynos: gsc: Convert driver to IPP v2 core API")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 14 Dec 2023 12:32:15 +0000 (13:32 +0100)]
drm/exynos: fix accidental on-stack copy of exynos_drm_plane
[ Upstream commit
960b537e91725bcb17dd1b19e48950e62d134078 ]
gcc rightfully complains about excessive stack usage in the fimd_win_set_pixfmt()
function:
drivers/gpu/drm/exynos/exynos_drm_fimd.c: In function 'fimd_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos_drm_fimd.c:750:1: error: the frame size of 1032 bytes is larger than 1024 byte
drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos5433_drm_decon.c:381:1: error: the frame size of 1032 bytes is larger than 1024 bytes
There is really no reason to copy the large exynos_drm_plane
structure to the stack before using one of its members, so just
use a pointer instead.
Fixes:
6f8ee5c21722 ("drm/exynos: fimd: Make plane alpha configurable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yajun Deng [Thu, 18 Jan 2024 06:18:53 +0000 (14:18 +0800)]
memblock: fix crash when reserved memory is not added to memory
[ Upstream commit
6a9531c3a88096a26cf3ac582f7ec44f94a7dcb2 ]
After commit
61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
nid of a reserved region is used by init_reserved_page() (with
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y) to access node strucure.
In many cases the nid of the reserved memory is not set and this causes
a crash.
When the nid of a reserved region is not set, fall back to
early_pfn_to_nid(), so that nid of the first_online_node will be passed
to init_reserved_page().
Fixes:
61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20240118061853.2652295-1-yajun.deng@linux.dev
[rppt: massaged the commit message]
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Wed, 17 Jan 2024 18:35:03 +0000 (10:35 -0800)]
drm/bridge: parade-ps8640: Make sure we drop the AUX mutex in the error case
[ Upstream commit
a20f1b02bafcbf5a32d96a1d4185d6981cf7d016 ]
After commit
26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"), if we hit the error case in
ps8640_aux_transfer() then we return without dropping the mutex. Fix
this oversight.
Fixes:
26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge is suspended in .post_disable()")
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117103502.1.Ib726a0184913925efc7e99c4d4fc801982e1bc24@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pin-yen Lin [Tue, 9 Jan 2024 12:04:57 +0000 (20:04 +0800)]
drm/bridge: parade-ps8640: Ensure bridge is suspended in .post_disable()
[ Upstream commit
26db46bc9c675e43230cc6accd110110a7654299 ]
The ps8640 bridge seems to expect everything to be power cycled at the
disable process, but sometimes ps8640_aux_transfer() holds the runtime
PM reference and prevents the bridge from suspend.
Prevent that by introducing a mutex lock between ps8640_aux_transfer()
and .post_disable() to make sure the bridge is really powered off.
Fixes:
826cff3f7ebb ("drm/bridge: parade-ps8640: Enable runtime power management")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109120528.1292601-1-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Wed, 3 Jan 2024 13:31:08 +0000 (15:31 +0200)]
drm/bridge: sii902x: Fix audio codec unregistration
[ Upstream commit
3fc6c76a8d208d3955c9e64b382d0ff370bc61fc ]
The driver never unregisters the audio codec platform device, which can
lead to a crash on module reloading, nor does it handle the return value
from sii902x_audio_codec_init().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes:
ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support")
Cc: Jyri Sarha <jsarha@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240103-si902x-fixes-v1-2-b9fd3e448411@ideasonboard.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-2-b9fd3e448411@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Wed, 3 Jan 2024 13:31:07 +0000 (15:31 +0200)]
drm/bridge: sii902x: Fix probing race issue
[ Upstream commit
08ac6f132dd77e40f786d8af51140c96c6d739c9 ]
A null pointer dereference crash has been observed rarely on TI
platforms using sii9022 bridge:
[ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x]
[ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x]
[ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm]
[ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper]
[ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper]
[ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm]
[ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper]
[ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper]
[ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper]
[ 53.326401] drm_client_register+0x5c/0xa0 [drm]
[ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper]
[ 53.336881] tidss_probe+0x128/0x264 [tidss]
[ 53.341174] platform_probe+0x68/0xc4
[ 53.344841] really_probe+0x188/0x3c4
[ 53.348501] __driver_probe_device+0x7c/0x16c
[ 53.352854] driver_probe_device+0x3c/0x10c
[ 53.357033] __device_attach_driver+0xbc/0x158
[ 53.361472] bus_for_each_drv+0x88/0xe8
[ 53.365303] __device_attach+0xa0/0x1b4
[ 53.369135] device_initial_probe+0x14/0x20
[ 53.373314] bus_probe_device+0xb0/0xb4
[ 53.377145] deferred_probe_work_func+0xcc/0x124
[ 53.381757] process_one_work+0x1f0/0x518
[ 53.385770] worker_thread+0x1e8/0x3dc
[ 53.389519] kthread+0x11c/0x120
[ 53.392750] ret_from_fork+0x10/0x20
The issue here is as follows:
- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
platform_device_register_data()
- The registration of the audio platform device causes probing of the
deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
However, the sii902x driver has not set up the i2c part yet, leading
to the crash.
Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes:
21d808405fe4 ("drm/bridge/sii902x: Fix EDID readback")
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonboard.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Artur Weber [Fri, 5 Jan 2024 06:53:02 +0000 (07:53 +0100)]
drm/panel: samsung-s6d7aa0: drop DRM_BUS_FLAG_DE_HIGH for lsl080al02
[ Upstream commit
62b143b5ec4a14e1ae0dede5aabaf1832e3b0073 ]
It turns out that I had misconfigured the device I was using the panel
with; the bus data polarity is not high for this panel, I had to change
the config on the display controller's side.
Fix the panel config to properly reflect its accurate settings.
Fixes:
6810bb390282 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240105-tab3-display-fixes-v2-2-904d1207bf6f@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105-tab3-display-fixes-v2-2-904d1207bf6f@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log