nvme: introduce "Command Aborted By host" status code

[ Upstream commit 2dc3947b53f573e8a75ea9cbec5588df88ca502e ]

Fix the status code of canceled requests initiated by the host according
to TP4028 (Status Code 0x371):
"Command Aborted By host: The command was aborted as a result of host
action (e.g., the host disconnected the Fabric connection)."

Also in a multipath environment, unless otherwise specified, errors of
this type (path related) should be retried using a different path, if
one is available.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-core: fix touch support in v4l_g_fmt

[ Upstream commit 545b618cfb5cadacd00c25066b9a36540e5ca9e9 ]

v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of
the v4l2_pix_format structure to default values.This was
missing in v4l_g_fmt, which would lead to failures in
v4l2-compliance tests.

Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rcar_drif: fix a memory disclosure

[ Upstream commit d39083234c60519724c6ed59509a2129fd2aed41 ]

"f->fmt.sdr.reserved" is uninitialized. As other peer drivers
like msi2500 and airspy do, the fix initializes it to avoid
memory disclosures.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: sun50i: Fix CPU speed bin detection

[ Upstream commit c23734487fb44ee16c1b007ba72d793c085e4ec4 ]

I have observed failures to boot on Orange Pi 3, because this driver
determined that my SoC is from the normal bin, but my SoC only works
reliably with the OPP values for the slowest bin.

By querying H6 owners, it was found that e-fuse values found in the wild
are in the range of 1-3, value of 7 was not reported, yet. From this and
from unused defines in BSP code, it can be assumed that meaning of efuse
values on H6 actually is:

- 1 = slowest bin
- 2 = normal bin
- 3 = fastest bin

Vendor code actually treats 0 and 2 as invalid efuse values, but later
treats all invalid values as a normal bin. This looks like a mistake in
bin detection code, that was plastered over by a hack in cpufreq code,
so let's not repeat it here. It probably only works because there are no
SoCs in the wild with efuse value of 0, and fast bin SoCs are made to
use normal bin OPP tables, which is also safe.

Let's play it safe and interpret 0 as the slowest bin, but fix detection
of other bins to match this research. More research will be done before
actual OPP tables are merged.

Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: protect TX timestamping from API misuse

[ Upstream commit 07066d9dc3d2326fbad8f7b0cb0120cff7b7dedb ]

HW timestamping can only be requested for a packet if the NIC is first
setup via ioctl(SIOCSHWTSTAMP). If this step was skipped, then the ixgbe
driver still allowed TX packets to request HW timestamping. In this
situation, we see 'clearing Tx Timestamp hang' noise in the log.

Fix this by checking that the NIC is configured for HW TX timestamping
before accepting a HW TX timestamping request.

Similar-to:
   commit 26bd4e2db06b ("igb: protect TX timestamping from API misuse")
   commit 0a6f2f05a2f5 ("igb: Fix a test with HWTSTAMP_TX_ON")

Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler()

[ Upstream commit 10ff58aa3c2e2a093b6ad615a7e3d8bb0dc613e5 ]

The regs pointer in amd_gpio_irq_handler() should have __iomem
on it, so add that to fix the following sparse warnings:

drivers/pinctrl/pinctrl-amd.c:555:14: warning: incorrect type in assignment (different address spaces)
drivers/pinctrl/pinctrl-amd.c:555:14:    expected unsigned int [usertype] *regs
drivers/pinctrl/pinctrl-amd.c:555:14:    got void [noderef] <asn:2> *base
drivers/pinctrl/pinctrl-amd.c:563:34: warning: incorrect type in argument 1 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:563:34:    expected void const volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:563:34:    got unsigned int [usertype] *
drivers/pinctrl/pinctrl-amd.c:580:34: warning: incorrect type in argument 1 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:580:34:    expected void const volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:580:34:    got unsigned int [usertype] *
drivers/pinctrl/pinctrl-amd.c:587:25: warning: incorrect type in argument 2 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:587:25:    expected void volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:587:25:    got unsigned int [usertype] *

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191022151154.5986-1-ben.dooks@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET

[ Upstream commit 81898a44f288607cb3b11a42aed6efb646891c19 ]

The SDC_QDSD_PINGROUP/UFS_RESET macros are missing the .tile info needed to
calculate the right register offsets. Adding them here and also
adjusting the offsets accordingly.

Fixes: f2ae04c45b1a ("pinctrl: qcom: Add SC7180 pinctrl driver")

Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/20191021141507.24066-1-rnayak@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency

[ Upstream commit f9ad75468453b019b92c5296e6a04bf7c37f49e4 ]

updated solution to the problem reported with randconfig:

CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:

sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'

use def_trisate to propagate the right settings without select.

Fixes: f4df4e4042b0 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a1f ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sifive: disable clk when probe fails and remove

[ Upstream commit a725272bda77e61c1b4de85c7b0c875b2ea639b6 ]

The driver forgets to disable and unprepare clk when probe fails and
remove.
Add the calls to fix the problem.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
Link: https://lore.kernel.org/r/20191101121745.13413-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: Fix missing check of the new non-cached buffer type

[ Upstream commit 6111fd2370eecae9f11bfdc08ba097e0b51fcfd3 ]

The check for the mmap support via hw_support_mmap() function misses
the case where the device is with SNDRV_DMA_TYPE_DEV_UC, which should
have been treated equally as SNDRV_DMA_TYPE_DEV.  Let's fix it.

Note that this bug doesn't hit any practical problem, because
SNDRV_DMA_TYPE_DEV_UC is used only for x86-specific drivers
(snd-hda-intel and snd-intel8x0) for the specific platforms that need
the non-cached buffers.  And, on such platforms, hw_support_mmap()
already returns true in anyway.  That's the reason I didn't put
Cc-to-stable mark here.  This is only for any theoretical future
extension.

Fixes: 425da159707b ("ALSA: pcm: use dma_can_mmap() to check if a device supports dma_mmap_*")
Fixes: 42e748a0b325 ("ALSA: memalloc: Add non-cached buffer type")
Link: https://lore.kernel.org/r/20191104101115.27311-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix advertising duplicated flags

[ Upstream commit 6012b9346d8959194c239fd60a62dfec98d43048 ]

Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x06
        Flags: 0x04
          BR/EDR Not Supported
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix error handling in bpf_map__reuse_fd()

[ Upstream commit d1b4574a4b86565325ef2e545eda8dfc9aa07c60 ]

bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: dln2-adc: fix iio_triggered_buffer_postenable() position

[ Upstream commit a7bddfe2dfce1d8859422124abe1964e0ecd386e ]

The iio_triggered_buffer_postenable() hook should be called first to
attach the poll function. The iio_triggered_buffer_predisable() hook is
called last (as is it should).

This change moves iio_triggered_buffer_postenable() to be called first. It
adds iio_triggered_buffer_predisable() on the error paths of the postenable
hook.
For the predisable hook, some code-paths have been changed to make sure
that the iio_triggered_buffer_predisable() hook gets called in case there
is an error before it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: bebob: expand sleep just after breaking connections for protocol version 1

[ Upstream commit d3eabe939aee3ffd5b133766a932629a9746298c ]

As long as I investigated, some devices with BeBoB protocol version 1
can be freezed during several hundreds milliseconds after breaking
connections. When accessing during the freezed time, any transaction
is corrupted. In the worst case, the device is going to reboot.

I can see this issue in:
 * Roland FA-66
 * M-Audio FireWire Solo

This commit expands sleep just after breaking connections to avoid
the freezed time as much as possible. I note that the freeze/reboot
behaviour is similar to below models:
 * Focusrite Saffire Pro 10 I/O
 * Focusrite Saffire Pro 26 I/O

The above models certainly reboot after breaking connections.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B

[ Upstream commit 884caadad128efad8e00c1cdc3177bc8912ee8ec ]

The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.

Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.

Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Verify that rule has at least one fwd/drop action

[ Upstream commit ae2741e2b6ce2bf1b656b1152c4ef147ff35b096 ]

Currently, mlx5 tc layer doesn't verify that rule has at least one forward
or drop action which leads to following firmware syndrome when user tries
to offload such action:

[ 1824.860501] mlx5_core 0000:81:00.0: mlx5_cmd_check:753:(pid 29458): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a)

Add check at the end of parse_tc_fdb_actions() that verifies that resulting
attribute has action fwd or drop flag set.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

loop: fix no-unmap write-zeroes request behavior

[ Upstream commit efcfec579f6139528c9e6925eca2bc4a36da65c6 ]

Currently, if the loop device receives a WRITE_ZEROES request, it asks
the underlying filesystem to punch out the range.  This behavior is
correct if unmapping is allowed.  However, a NOUNMAP request means that
the caller doesn't want us to free the storage backing the range, so
punching out the range is incorrect behavior.

To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the
underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to
the fallocate documentation) required to ensure that the entire range is
backed by real storage, which suffices for our purposes.

Fixes: 19372e2769179dd ("loop: implement REQ_OP_WRITE_ZEROES")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libata: Ensure ata_port probe has completed before detach

[ Upstream commit 130f4caf145c3562108b245a576db30b916199d2 ]

With CONFIG_DEBUG_TEST_DRIVER_REMOVE set, we may find the following WARN:

[   23.452574] ------------[ cut here ]------------
[   23.457190] WARNING: CPU: 59 PID: 1 at drivers/ata/libata-core.c:6676 ata_host_detach+0x15c/0x168
[   23.466047] Modules linked in:
[   23.469092] CPU: 59 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00010-g5b83fd27752b-dirty #296
[   23.477776] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[   23.486286] pstate: a0c00009 (NzCv daif +PAN +UAO)
[   23.491065] pc : ata_host_detach+0x15c/0x168
[   23.495322] lr : ata_host_detach+0x88/0x168
[   23.499491] sp : ffff800011cabb50
[   23.502792] x29: ffff800011cabb50 x28: 0000000000000007
[   23.508091] x27: ffff80001137f068 x26: ffff8000112c0c28
[   23.513390] x25: 0000000000003848 x24: ffff0023ea185300
[   23.518689] x23: 0000000000000001 x22: 00000000000014c0
[   23.523987] x21: 0000000000013740 x20: ffff0023bdc20000
[   23.529286] x19: 0000000000000000 x18: 0000000000000004
[   23.534584] x17: 0000000000000001 x16: 00000000000000f0
[   23.539883] x15: ffff0023eac13790 x14: ffff0023eb76c408
[   23.545181] x13: 0000000000000000 x12: ffff0023eac13790
[   23.550480] x11: ffff0023eb76c228 x10: 0000000000000000
[   23.555779] x9 : ffff0023eac13798 x8 : 0000000040000000
[   23.561077] x7 : 0000000000000002 x6 : 0000000000000001
[   23.566376] x5 : 0000000000000002 x4 : 0000000000000000
[   23.571674] x3 : ffff0023bf08a0bc x2 : 0000000000000000
[   23.576972] x1 : 3099674201f72700 x0 : 0000000000400284
[   23.582272] Call trace:
[   23.584706]  ata_host_detach+0x15c/0x168
[   23.588616]  ata_pci_remove_one+0x10/0x18
[   23.592615]  ahci_remove_one+0x20/0x40
[   23.596356]  pci_device_remove+0x3c/0xe0
[   23.600267]  really_probe+0xdc/0x3e0
[   23.603830]  driver_probe_device+0x58/0x100
[   23.608000]  device_driver_attach+0x6c/0x90
[   23.612169]  __driver_attach+0x84/0xc8
[   23.615908]  bus_for_each_dev+0x74/0xc8
[   23.619730]  driver_attach+0x20/0x28
[   23.623292]  bus_add_driver+0x148/0x1f0
[   23.627115]  driver_register+0x60/0x110
[   23.630938]  __pci_register_driver+0x40/0x48
[   23.635199]  ahci_pci_driver_init+0x20/0x28
[   23.639372]  do_one_initcall+0x5c/0x1b0
[   23.643199]  kernel_init_freeable+0x1a4/0x24c
[   23.647546]  kernel_init+0x10/0x108
[   23.651023]  ret_from_fork+0x10/0x18
[   23.654590] ---[ end trace 634a14b675b71c13 ]---

With KASAN also enabled, we may also get many use-after-free reports.

The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may
attempt to detach the ata_port before it has been probed.

This is because the ata_ports are async probed, meaning that there is no
guarantee that the ata_port has probed prior to detach. When the ata_port
does probe in this scenario, we get all sorts of issues as the detach may
have already happened.

Fix by ensuring synchronisation with async_synchronize_full(). We could
alternatively use the cookie returned from the ata_port probe
async_schedule() call, but that means managing the cookie, so more
complicated.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add struct netdev_queue debug info for TX timeout

[ Upstream commit 647522a5ef6401dcdb8ec417421e43fb21910167 ]

When there is a TX timeout, we can tell if the driver or stack
has stopped the queue by looking at state field, and when has
the last packet transmited by looking at trans_start field.

So this patch prints these two field in the
hns3_get_tx_timeo_queue_info().

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: add mm_pxd_folded() checks to pxd_free()

[ Upstream commit 2416cefc504ba8ae9b17e3e6b40afc72708f96be ]

Unlike pxd_free_tlb(), the pxd_free() functions do not check for folded
page tables. This is not an issue so far, as those functions will actually
never be called, since no code will reach them when page tables are folded.

In order to avoid future issues, and to make the s390 code more similar to
other architectures, add mm_pxd_folded() checks, similar to how it is done
in pxd_free_tlb().

This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add tests validating architecture
page table helpers").

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: add error handling to perf_callchain_kernel

[ Upstream commit effb83ccc83a97dbbe5214f4c443522719f05f3a ]

perf_callchain_kernel stops neither when it encounters a garbage
address, nor when it runs out of space. Fix both issues using x86
version as an inspiration.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/time: ensure get_clock_monotonic() returns monotonic values

[ Upstream commit 011620688a71f2f1fe9901dbc2479a7c01053196 ]

The current implementation of get_clock_monotonic() leaves it up to
the caller to call the function with preemption disabled. The only
core kernel caller (sched_clock) however does not disable preemption.

In order to make sure that all callers of this function see monotonic
values handle disabling preemption within the function itself.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-usb-hs: Fix extcon double register after power cycle

[ Upstream commit 64f86b9978449ff05bfa6c64b4c5439e21e9c80b ]

Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().

This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:

double register detected
WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
Call trace:
 ...
 extcon_register_notifier+0x74/0xb8
 devm_extcon_register_notifier+0x54/0xb8
 qcom_usb_hs_phy_power_on+0x1fc/0x208
 ...

... and USB stops working after plugging the cable out and in
another time.

The easiest way to fix this is to make a partial revert of
commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.

Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: renesas: phy-rcar-gen2: Fix the array off by one warning

[ Upstream commit c9baab38fe0e28762d0d67611cbe2aef0fb3fc72 ]

Fix the below smatch warning by adding variable check rather than the
hardcoded value.
warn: array off by one? 'data->select_value[channel_num]'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: LAN9303: select REGMAP when LAN9303 enable

[ Upstream commit b6989d248a2d13f02895bae1a9321b3bbccc0283 ]

When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y,
below errors can be seen:
drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE
undeclared here (not in a function)
  .reg_format_endian = REGMAP_ENDIAN_LITTLE,
drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config
has no member named reg_read
  .reg_read = lan9303_mdio_read,

It should select REGMAP in config NET_DSA_SMSC_LAN9303.

Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Allocate gather copy for host1x

[ Upstream commit b78e70c04c149299bd210759d7c7af7c86b89ca8 ]

Currently when the gather buffers are copied, they are copied to a
buffer that is allocated for the host1x client that wants to execute the
command streams in the buffers. However, the gather buffers will be read
by the host1x device, which causes SMMU faults if the DMA API is backed
by an IOMMU.

Fix this by allocating the gather buffer copy for the host1x device,
which makes sure that it will be mapped into the host1x's IOVA space if
the DMA API is backed by an IOMMU.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wilc1000: check if device is initialzied before changing vif

[ Upstream commit 6df6f3849bb8f317bf2d52711aacea4292237ede ]

When killing hostapd, the interface is closed which deinitializes the
device, then change virtual interface is called.
This change checks if the device is initialized before sending the
interface change command to the device

Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20191028184019.31194-1-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Set DMA parameters correctly

[ Upstream commit c9121262d57b8a3be4f08073546436ba0128ca6a ]

The dma_set_max_seg_size() call in setup_dma_device() does not have any
effect since device->dev.dma_parms is NULL. Fix this by initializing
device->dev.dma_parms first.

Link: https://lore.kernel.org/r/20191025225830.257535-5-bvanassche@acm.org
Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/qedr: Fix srqs xarray initialization

[ Upstream commit 73ab512f720298aabe23b34110e3f6a8545b0ba5 ]

There was a missing initialization for the srqs xarray.
SRQs xarray can also be called from irq context when searching
for an element and uses the xa_XXX_irq apis, therefore should
be initialized with IRQ flags.

Fixes: 9fd15987ed27 ("qedr: Convert srqidr to XArray")
Link: https://lore.kernel.org/r/20191027200451.28187-2-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix memory leak on 'context' on error return path

[ Upstream commit 994195e1537074f56df216a9309f6e366cb35b67 ]

Currently, the error return path when the call to function
dev->dfx->query_cqc_info fails will leak object 'context'. Fix this by
making the error return path via 'err' return return codes rather than
-EMSGSIZE, set ret appropriately for all error return paths and for the
memory leak now return via 'err' rather than just returning without
freeing context.

Link: https://lore.kernel.org/r/20191024131034.19989-1-colin.king@canonical.com
Addresses-Coverity: ("Resource leak")
Fixes: e1c9a0dc2939 ("RDMA/hns: Dump detailed driver-specific CQ")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/qedr: Fix memory leak in user qp and mr

[ Upstream commit 24e412c1e00ebfe73619e6b88cbc26c2c7d41b85 ]

User QPs pbl's weren't freed properly.
MR pbls weren't freed properly.

Fixes: e0290cce6ac0 ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20191027200451.28187-5-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: button: Add DMI quirk for Medion Akoya E2215T

[ Upstream commit 932e1ba486117de2fcea3df27ad8218ad6c11470 ]

The Medion Akoya E2215T's ACPI _LID implementation is quite broken:

 1. For notifications it uses an ActiveLow Edge GpioInt, rather then
    an ActiveBoth one, meaning that the device is only notified when the
    lid is closed, not when it is opened.

2. Matching with this its _LID method simply always returns 0 (closed)

  In order for the Linux LID code to work properly with this implementation,
  the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN.

This commit adds a DMI quirk for this.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sprd: adi: Add missing lock protection when rebooting

[ Upstream commit 91ea1d70607e374b014b4b9bea771ce661f9f64b ]

When rebooting the system, we should lock the watchdog after
configuration to make sure the watchdog can reboot the system
successfully.

Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/7b04711127434555e3a1a86bc6be99860cd86668.1572257085.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubsan, x86: Annotate and allow __ubsan_handle_shift_out_of_bounds() in uaccess regions

[ Upstream commit 9a50dcaf0416a43e1fe411dc61a99c8333c90119 ]

The new check_zeroed_user() function uses variable shifts inside of a
user_access_begin()/user_access_end() section and that results in GCC
emitting __ubsan_handle_shift_out_of_bounds() calls, even though
through value range analysis it would be able to see that the UB in
question is impossible.

Annotate and whitelist this UBSAN function; continued use of
user_access_begin()/user_access_end() will undoubtedly result in
further uses of function.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cyphar@cyphar.com
Cc: keescook@chromium.org
Cc: linux@rasmusvillemoes.dk
Fixes: f5a1a536fa14 ("lib: introduce copy_struct_from_user() helper")
Link: https://lkml.kernel.org/r/20191021131149.GA19358@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Release coupled_rdevs on regulator_init_coupling() error

[ Upstream commit 26c2c997aa1a6c5522f6619910ba025e53e69763 ]

This patch fixes memory leak which should happen if regulator's coupling
fails to initialize.

Fixes: d8ca7d184b33 ("regulator: core: Introduce API for regulators coupling customization")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20191025002240.25288-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: sor: Use correct SOR index on Tegra210

[ Upstream commit 24e64f86da40e68c5f58af08796110f147b12193 ]

The device tree bindings for the Tegra210 SOR don't require the
controller instance to be defined, since the instance can be derived
from the compatible string. The index is never used on Tegra210, so we
got away with it not getting set. However, subsequent patches will
change that, so make sure the proper index is used.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83867: enable robust auto-mdix

[ Upstream commit 5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 ]

The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).

CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."

Hence, enable this option by default as there are no known reasons
not to do so.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Wrong 'Advertised FEC modes' after set FEC to AUTO

[ Upstream commit e42b7e9cefca9dd008cbafffca97285cf264f72d ]

Fix display of parameters "Configured FEC encodings:" and "Advertised
FEC modes:" in ethtool.  Implemented by setting proper FEC bits in
“advertising” bitmask of link_modes struct and “fec” bitmask in
ethtool_fecparam struct. Without this patch wrong FEC settings
can be shown.

Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: correctly populate dpp refclk in fpga

[ Upstream commit 952f6c4b5d72d40f93f3deb61239290b357d434e ]

[Why]
In diags environment we are not programming the DPP DTO
correctly.

[How]
Populate the dpp refclk in dccg so it can be used to correctly
program DPP DTO.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: initialize ITRN registers with correct values

[ Upstream commit 998e5166e604fd37afe94352f7b8c2d816b11049 ]

Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN/ITR0 registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.

Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.

This patch adds the correct conversion when writing the initial values to
the ITRN registers.

Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: setting the DIG_MODE to the correct value.

[ Upstream commit 967a3b85bac91c55eff740e61bf270c2732f48b2 ]

[Why]
This patch is for fixing Navi14 HDMI display pink screen issue.

[How]
Call stream->link->link_enc->funcs->setup twice. This is setting
the DIG_MODE to the correct value after having been overridden by
the call to transmitter control.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()

[ Upstream commit bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ]

In cases like suspend-to-disk and suspend-to-ram, a large number of CPU
cores need to be shut down. At present, the CPU hotplug operation is
serialised, and the CPU cores can only be shut down one by one. In this
process, if PSCI affinity_info() does not return LEVEL_OFF quickly,
cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores
need to be shut down, it will take a long time.

Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So
change the wait interval from 10 ms to max 1 ms and use usleep_range()
instead of msleep() for more accurate timer.

In addition, reducing the time interval will increase the messages
output, so remove the "Retry ..." message, instead, track time and
output to the the sucessful message.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/amd64: Set grain per DIMM

[ Upstream commit 466503d6b1b33be46ab87c6090f0ade6c6011cbc ]

The following commit introduced a warning on error reports without a
non-zero grain value.

  3724ace582d9 ("EDAC/mc: Fix grain_bits calculation")

The amd64_edac_mod module does not provide a value, so the warning will
be given on the first reported memory error.

Set the grain per DIMM to cacheline size (64 bytes). This is the current
recommendation.

Fixes: 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191022203448.13962-7-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Don't free jobs in wait_event_interruptible()

[ Upstream commit 588b9828f0744ca13555c4a35cd0251ac8ad8ad2 ]

drm_sched_cleanup_jobs() attempts to free finished jobs, however because
it is called as the condition of wait_event_interruptible() it must not
sleep. Unfortunately some free callbacks (notably for Panfrost) do sleep.

Instead let's rename drm_sched_cleanup_jobs() to
drm_sched_get_cleanup_job() and simply return a job for processing if
there is one. The caller can then call the free_job() callback outside
the wait_event_interruptible() where sleeping is possible before
re-checking and returning to sleep if necessary.

Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Fixes: 5918045c4ed4 ("drm/scheduler: rework job destruction")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/337652/
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit

[ Upstream commit fadcbd2901a0f7c8721f3bdb69eac95c272dc8ed ]

We need to move "spin_lock_irq(&bitmap->counts.lock)" before unmap previous
storage, otherwise panic like belows could happen as follows.

[  902.353802] sdl: detected capacity change from 1077936128 to 3221225472
[  902.616948] general protection fault: 0000 [#1] SMP
[snip]
[  902.618588] CPU: 12 PID: 33698 Comm: md0_raid1 Tainted: G           O    4.14.144-1-pserver #4.14.144-1.1~deb10
[  902.618870] Hardware name: Supermicro SBA-7142G-T4/BHQGE, BIOS 3.00       10/24/2012
[  902.619120] task: ffff9ae1860fc600 task.stack: ffffb52e4c704000
[  902.619301] RIP: 0010:bitmap_file_clear_bit+0x90/0xd0 [md_mod]
[  902.619464] RSP: 0018:ffffb52e4c707d28 EFLAGS: 00010087
[  902.619626] RAX: ffe8008b0d061000 RBX: ffff9ad078c87300 RCX: 0000000000000000
[  902.619792] RDX: ffff9ad986341868 RSI: 0000000000000803 RDI: ffff9ad078c87300
[  902.619986] RBP: ffff9ad0ed7a8000 R08: 0000000000000000 R09: 0000000000000000
[  902.620154] R10: ffffb52e4c707ec0 R11: ffff9ad987d1ed44 R12: ffff9ad0ed7a8360
[  902.620320] R13: 0000000000000003 R14: 0000000000060000 R15: 0000000000000800
[  902.620487] FS:  0000000000000000(0000) GS:ffff9ad987d00000(0000) knlGS:0000000000000000
[  902.620738] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  902.620901] CR2: 000055ff12aecec0 CR3: 0000001005207000 CR4: 00000000000406e0
[  902.621068] Call Trace:
[  902.621256]  bitmap_daemon_work+0x2dd/0x360 [md_mod]
[  902.621429]  ? find_pers+0x70/0x70 [md_mod]
[  902.621597]  md_check_recovery+0x51/0x540 [md_mod]
[  902.621762]  raid1d+0x5c/0xeb0 [raid1]
[  902.621939]  ? try_to_del_timer_sync+0x4d/0x80
[  902.622102]  ? del_timer_sync+0x35/0x40
[  902.622265]  ? schedule_timeout+0x177/0x360
[  902.622453]  ? call_timer_fn+0x130/0x130
[  902.622623]  ? find_pers+0x70/0x70 [md_mod]
[  902.622794]  ? md_thread+0x94/0x150 [md_mod]
[  902.622959]  md_thread+0x94/0x150 [md_mod]
[  902.623121]  ? wait_woken+0x80/0x80
[  902.623280]  kthread+0x119/0x130
[  902.623437]  ? kthread_create_on_node+0x60/0x60
[  902.623600]  ret_from_fork+0x22/0x40
[  902.624225] RIP: bitmap_file_clear_bit+0x90/0xd0 [md_mod] RSP: ffffb52e4c707d28

Because mdadm was running on another cpu to do resize, so bitmap_resize was
called to replace bitmap as below shows.

PID: 38801  TASK: ffff9ad074a90e00  CPU: 0   COMMAND: "mdadm"
   [exception RIP: queued_spin_lock_slowpath+56]
   [snip]
-- <NMI exception stack> --
 #5 [ffffb52e60f17c58] queued_spin_lock_slowpath at ffffffff9c0b27b8
 #6 [ffffb52e60f17c58] bitmap_resize at ffffffffc0399877 [md_mod]
 #7 [ffffb52e60f17d30] raid1_resize at ffffffffc0285bf9 [raid1]
 #8 [ffffb52e60f17d50] update_size at ffffffffc038a31a [md_mod]
 #9 [ffffb52e60f17d70] md_ioctl at ffffffffc0395ca4 [md_mod]

And the procedure to keep resize bitmap safe is allocate new storage
space, then quiesce, copy bits, replace bitmap, and re-start.

However the daemon (bitmap_daemon_work) could happen even the array is
quiesced, which means when bitmap_file_clear_bit is triggered by raid1d,
then it thinks it should be fine to access store->filemap since
counts->lock is held, but resize could change the storage without the
protection of the lock.

Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wilc1000: potential corruption in wilc_parse_join_bss_param()

[ Upstream commit d59dc92f1bccd5acde793aebdbb4f7121cf3f9af ]

The "rates_len" value needs to be capped so that the memcpy() doesn't
copy beyond the end of the array.

Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20191017091832.GB31278@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: no longer compare spare disk superblock events in super_load

[ Upstream commit 6a5cb53aaa4ef515ddeffa04ce18b771121127b4 ]

We have a test case as follow:

  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] \
--assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

When we readd /dev/sda to the array, it started to do recovery.
After offline the other two disks in md1, the recovery have
been interrupted and superblock update info cannot be written
to the offline disks. While the spare disk (/dev/sda) can continue
to update superblock info.

After stopping the array and assemble it, we found the array
run fail, with the follow kernel message:

[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)
[  173.023466] md: md1 stopped.

Since both sdb and sdc have the value of 'sb->events' smaller than
that in sda, they have been kicked from the array. However, the only
remained disk sda is in 'spare' state before stop and it cannot be
added to conf->mirrors[] array. In the end, raid array assemble
and run fail.

In fact, we can use the older disk sdb or sdc to assemble the array.
That means we should not choose the 'spare' disk as the fresh disk in
analyze_sbs().

To fix the problem, we do not compare superblock events when it is
a spare disk, as same as validate_super.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: smiapp: Register sensor after enabling runtime PM on the device

[ Upstream commit 90c9e4a4dba9f4de331372e745fb1991c1faa598 ]

Earlier it was possible that the parts of the driver that assumed runtime
PM was enabled were being called before runtime PM was enabled in the
driver's probe function. So enable runtime PM before registering the
sub-device.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: aspeed: clear garbage interrupts

[ Upstream commit 65d270acb2d662c3346793663ac3a759eb4491b8 ]

CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these
are disabled in the VE_INTERRUPT_CTRL register and eventually this
behavior causes disabling irq itself like below:

[10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option)
[10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G        W         5.3.0-4fde000-dirty-d683e2e #1
[10055.124565] Hardware name: Generic DT based system
[10055.129355] Backtrace:
[10055.131854] [<80107d7c>] (dump_backtrace) from [<80107fb0>] (show_stack+0x20/0x24)
[10055.139431]  r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00
[10055.145120] [<80107f90>] (show_stack) from [<8074bf50>] (dump_stack+0x20/0x28)
[10055.152361] [<8074bf30>] (dump_stack) from [<80150ffc>] (__report_bad_irq+0x40/0xc0)
[10055.160109] [<80150fbc>] (__report_bad_irq) from [<80150f2c>] (note_interrupt+0x23c/0x294)
[10055.168374]  r9:015b6e60 r8:00000000 r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00
[10055.176136] [<80150cf0>] (note_interrupt) from [<8014df1c>] (handle_irq_event_percpu+0x88/0x98)
[10055.184835]  r10:7eff7910 r9:015b6e60 r8:00000000 r7:9d417600 r6:00000001 r5:00000002
[10055.192657]  r4:9d51dc00 r3:00000000
[10055.196248] [<8014de94>] (handle_irq_event_percpu) from [<8014df64>] (handle_irq_event+0x38/0x4c)
[10055.205113]  r5:80b56d50 r4:9d51dc00
[10055.208697] [<8014df2c>] (handle_irq_event) from [<80151f1c>] (handle_level_irq+0xbc/0x12c)
[10055.217037]  r5:80b56d50 r4:9d51dc00
[10055.220623] [<80151e60>] (handle_level_irq) from [<8014d4b8>] (generic_handle_irq+0x30/0x44)
[10055.229052]  r5:80b56d50 r4:00000017
[10055.232648] [<8014d488>] (generic_handle_irq) from [<8014d524>] (__handle_domain_irq+0x58/0xb4)
[10055.241356] [<8014d4cc>] (__handle_domain_irq) from [<801021e4>] (avic_handle_irq+0x68/0x70)
[10055.249797]  r9:015b6e60 r8:00c5387d r7:00c5387d r6:ffffffff r5:9dd33fb0 r4:9d402380
[10055.257539] [<8010217c>] (avic_handle_irq) from [<80101e34>] (__irq_usr+0x54/0x80)
[10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8)
[10055.270152] 3fa0:                                     015d0530 00000000 00000000 015d0538
[10055.278328] 3fc0: 015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918
[10055.286496] 3fe0: 76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff
[10055.293104]  r5:20000010 r4:76a3a08c
[10055.296673] handlers:
[10055.298967] [<79f218a5>] irq_default_primary_handler threaded [<1de88514>] aspeed_video_irq
[10055.307344] Disabling IRQ #23

To fix this issue, this commit makes the interrupt handler clear
these garbage interrupts. This driver enables and uses only
COMP_COMPLETE interrupt instead for frame handling.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx7-mipi-csis: Add a check for devm_regulator_get

[ Upstream commit a0219deefe9ee5006a28d48522f76b217d198c51 ]

devm_regulator_get may return an error but mipi_csis_phy_init misses
a check for it.
This may lead to problems when regulator_set_voltage uses the unchecked
pointer.
This patch adds a check for devm_regulator_get to avoid potential risk.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: st-mipid02: add a check for devm_gpiod_get_optional

[ Upstream commit 61c03b631b74a38ab53753f3ee971a55886d4843 ]

mipid02_probe misses a check for devm_gpiod_get_optional and may miss
the failure.
Add a check to fix the problem.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Make 2592x1944 mode only available at 15 fps

[ Upstream commit 981e445454531c9d5ac5d3fa8c0f1bd55262d001 ]

The sensor data sheet clearly state that 2592x1944 only works at 15 fps
make sure we don't try to miss configure the pll out of acceptable
range.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ad5820: Define entity function

[ Upstream commit 801ef7c4919efba6b96b5aed1e72844ca69e26d3 ]

Without this patch, media_device_register_entity throws a warning:

dev_warn(mdev->dev,
 "Entity type for entity %s was not initialized!\n",
 entity->name);

Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov6650: Fix stored frame interval not in sync with hardware

[ Upstream commit 57822068dd120386b98891cb151dc20107b63ba7 ]

The driver stores a frame interval value supposed to be in line with
hardware state in a device private structure.  Since the driver initial
submission, the respective field of the structure has never been
initialised on device probe.  Moreover, if updated from
.s_frame_interval(), a new value is stored before it is applied on
hardware.  If an error occurs during device update, the stored value
may no longer reflect hardware state and consecutive calls to
.g_frame_interval() may return incorrect information.

Assuming a failed update of the device means its actual state hasn't
changed, update the frame interval field of the device private
structure with a new value only after it is successfully applied on
hardware so it always reflects actual hardware state to the extent
possible.  Also, initialise the field with hardware default frame
interval on device probe.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Don't grab runtime PM refs for HPD IRQs

[ Upstream commit 09e530657e1c982d3dbc5e4302bf9207950c3d0a ]

In order for suspend/resume reprobing to work, we need to be able to
perform sideband communications during suspend/resume, along with
runtime PM suspend/resume. In order to do so, we also need to make sure
that nouveau doesn't bother grabbing a runtime PM reference to do so,
since otherwise we'll start deadlocking runtime PM again.

Note that we weren't able to do this before, because of the DP MST
helpers processing UP requests from topologies in the same context as
drm_dp_mst_hpd_irq() which would have caused us to open ourselves up to
receiving hotplug events and deadlocking with runtime suspend/resume.
Now that those requests are handled asynchronously, this change should
be completely safe.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-10-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: aspeed: set hsync and vsync polarities to normal before starting mode detection

[ Upstream commit 5b3f3c41c5c791c1c22cd91655e7ef4b2a1dff7c ]

Sometimes it detects a weird resolution such as 1024x287 when the
actual resolution is 1024x768. To resolve such an issue, this
commit adds clearing for hsync and vsync polarity register bits
at the beginning of the first mode detection. This is recommended
in the datasheet.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro

[ Upstream commit 06eff2150d4db991ca236f3d05a9dc0101475aea ]

We need to shift and mask values at different occasions to fill up
cedrus registers. This was done using macros that don't explicitly
treat arguments as unsigned, leading to possibly undefined behavior.

Introduce the SHIFT_AND_MASK_BITS macro and use it where possible.
In cases where it doesn't apply as-is, explicitly cast to unsigned
instead.

This macro should be moved to include/linux/bits.h eventually.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/ioapic: Prevent inconsistent state when moving an interrupt

[ Upstream commit df4393424af3fbdcd5c404077176082a8ce459c4 ]

There is an issue with threaded interrupts which are marked ONESHOT
and using the fasteoi handler:

  if (IS_ONESHOT())
    mask_irq();
  ....
  cond_unmask_eoi_irq()
    chip->irq_eoi();
      if (setaffinity_pending) {
         mask_ioapic();
         ...
 move_affinity();
 unmask_ioapic();
      }

So if setaffinity is pending the interrupt will be moved and then
unconditionally unmasked at the ioapic level, which is wrong in two
aspects:

 1) It should be kept masked up to the point where the threaded handler
    finished.

 2) The physical chip state and the software masked state are inconsistent

Guard both the mask and the unmask with a check for the software masked
state. If the line is marked masked then the ioapic line is also masked, so
both mask_ioapic() and unmask_ioapic() can be skipped safely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Fixes: 3aa551c9b4c4 ("genirq: add threaded interrupt handler support")
Link: https://lkml.kernel.org/r/20191017101938.321393687@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: Don't allow device module unload when in use

[ Upstream commit cbb79863fc3175ed5ac506465948b02a893a8235 ]

If something has the IPMI driver open, don't allow the device
module to be unloaded.  Before it would unload and the user would
get errors on use.

This change is made on user request, and it makes it consistent
with the I2C driver, which has the same behavior.

It does change things a little bit with respect to kernel users.
If the ACPI or IPMI watchdog (or any other kernel user) has
created a user, then the device module cannot be unloaded.  Before
it could be unloaded,

This does not affect hot-plug.  If the device goes away (it's on
something removable that is removed or is hot-removed via sysfs)
then it still behaves as it did before.

Reported-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix SQ/RQ drain logic

[ Upstream commit cf049bb31f7101d9672eaf97ade4fdd5171ddf26 ]

Storage ULPs (e.g. iSER & NVMeOF) use ib_drain_qp() to drain
QP/CQ. Current SIW's own drain routines do not properly wait until all
SQ/RQ elements are completed and reaped from the CQ. This may cause touch
after free issues.  New logic relies on generic
__ib_drain_sq()/__ib_drain_rq() posting a final work request, which SIW
immediately flushes to CQ.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20191004125356.20673-1-bmt@zurich.ibm.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot

[ Upstream commit 0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ]

The RTL8723BU has problems connecting to AP after each warm reboot.
Sometimes it returns no scan result, and in most cases, it fails
the authentication for unknown reason. However, it works totally
fine after cold reboot.

Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
for cold reboot and warm reboot, the registers imply that the MAC
is already powered and thus some procedures are skipped during
driver initialization. Double checked the vendor driver, it reads
the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
during initialization based on them. This commit only tells the
RTL8723BU to do full initialization without checking MAC status.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-pcm: fixup dpcm_prune_paths() loop continue

[ Upstream commit bed646dc3f7bcec91178c278deaf969cce0700a8 ]

dpcm_prune_paths() is checking widget at 2 parts.
(A) is for CPU, (B) is for Codec.
If we focus to (A) part, continue at (a) is for (1) loop. But,
if we focus to (B) part, continue at (b) is for (2) loop, not for (1).
This is bug.
This patch fixup this issue.

static int dpcm_prune_paths(...)
{
...
   (1) for_each_dpcm_be(fe, stream, dpcm) {
...

 ^ widget = dai_get_widget(...);
 |
(A) if (widget && widget_in_list(...))
 | (a) continue;
 v
 ^ (2) for_each_rtd_codec_dai(...) {
 | widget = dai_get_widget(...);
(B)
 | if (widget && widget_in_list(...))
 v (b) continue;
}
...

Fixes: 2e5894d73789 ("ASoC: pcm: Add support for DAI multicodec")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blui64mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gma500: fix memory disclosures due to uninitialized bytes

[ Upstream commit ec3b7b6eb8c90b52f61adff11b6db7a8db34de19 ]

"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix wrong parameters when initial mtt of srq->idx_que

[ Upstream commit e8a07de57ea4ca7c2d604871c52826e66899fc70 ]

The parameters npages used to initial mtt of srq->idx_que shouldn't be
same with srq's. And page_shift should be calculated from idx_buf_pg_sz.
This patch fixes above issues and use field named npage and page_shift
in hns_roce_buf instead of two temporary variables to let us use them
anywhere.

Fixes: 18df508c7970 ("RDMA/hns: Remove if-else judgment statements for creating srq")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: log and clear hardware error after reset complete

[ Upstream commit 4fdd0bca6152aa201898454e63cbb255a18ae6e9 ]

When device is resetting, the CMDQ service may be stopped until
reset completed. If a new RAS error occurs at this moment, it
will no be able to clear the RAS source. This patch fixes it
by clear the RAS source after reset complete.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Make a copy of subtest name

[ Upstream commit f90415e9600c5227131531c0ed11514a2d3bbe62 ]

test_progs never created a copy of subtest name, rather just stored
pointer to whatever string test provided. This is bad as that string
might be freed or modified by the end of subtest. Fix this by creating
a copy of given subtest name when subtest starts.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-6-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests: Disable bp_signal testing for arm64

[ Upstream commit 6a5f3d94cb69a185b921cb92c39888dc31009acb ]

As there are several discussions for enabling perf breakpoint signal
testing on arm64 platform: arm64 needs to rely on single-step to execute
the breakpointed instruction and then reinstall the breakpoint exception
handler.  But if we hook the breakpoint with a signal, the signal
handler will do the stepping rather than the breakpointed instruction,
this causes infinite loops as below:

         Kernel space              |            Userspace
  ---------------------------------|--------------------------------
                                   |  __test_function() -> hit
   |                       breakpoint
  breakpoint_handler()             |
    `-> user_enable_single_step()  |
  do_signal()                      |
                                   |  sig_handler() -> Step one
   |                instruction and
   |                trap to kernel
  single_step_handler()            |
    `-> reinstall_suspended_bps()  |
                                   |  __test_function() -> hit
   |     breakpoint again and
   |     repeat up flow infinitely

As Will Deacon mentioned [1]: "that we require the overflow handler to
do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The
hw_breakpoint code is a complete disaster so my preference would be to
rip out the perf part and just implement something directly in ptrace,
but it's a pretty horrible job".  Though Will commented this on arm
architecture, but the comment also can apply on arm64 architecture.

For complete information, I searched online and found a few years back,
Wang Nan sent one patch 'arm64: Store breakpoint single step state into
pstate' [2]; the patch tried to resolve this issue by avoiding single
stepping in signal handler and defer to enable the signal stepping when
return to __test_function().  The fixing was not merged due to the
concern for missing to handle different usage cases.

Based on the info, the most feasible way is to skip Perf breakpoint
signal testing for arm64 and this could avoid the duplicate
investigation efforts when people see the failure.  This patch skips
this case on arm64 platform, which is same with arm architecture.

[1] https://lkml.org/lkml/2018/11/15/205
[2] https://lkml.org/lkml/2015/12/23/477

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20191018085531.6348-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cpcap-battery: Check voltage before orderly_poweroff

[ Upstream commit 639c1524da3b273d20c42ff2387d08eb4b12e903 ]

We can get the low voltage interrupt trigger sometimes way too early,
maybe because of CPU load spikes. This causes orderly_poweroff() be
called too easily.

Let's check the voltage before orderly_poweroff in case it was not
yet a permanent condition. We will be getting more interrupts anyways
if the condition persists.

Let's also show the measured voltages for low battery and battery
empty warnings since we have them.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: iio: ad9834: add a check for devm_clk_get

[ Upstream commit a96de139301385e5992768c0f60240ddfbb33325 ]

ad9834_probe misses a check for devm_clk_get and may cause problems.
Add a check like what ad9832 does to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix amdgpu trace event print string format error

[ Upstream commit 2c2fdb8bca290c439e383cfb6857b0c65e528964 ]

the trace event print string format error.
(use integer type to handle string)

before:
amdgpu_test_kev-1556  [002]   138.508781: amdgpu_cs_ioctl:
sched_job=8, timeline=gfx_0.0.0, context=177, seqno=1,
ring_name=ffff94d01c207bf0, num_ibs=2

after:
amdgpu_test_kev-1506  [004]   370.703783: amdgpu_cs_ioctl:
sched_job=12, timeline=gfx_0.0.0, context=234, seqno=2,
ring_name=gfx_0.0.0, num_ibs=1

change trace event list:
1.amdgpu_cs_ioctl
2.amdgpu_sched_run_job
3.amdgpu_ib_pipe_sync

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix header for RN clk mgr

[ Upstream commit cd83fa1ea9b9431cf1d57ac4179a11bc4393a5b6 ]

[why]
Should always MP0_BASE for any register definition from MP per-IP header files.
I belive the reason the linux version of MP1_BASE works is The 0th element of the 0th table
of that is identical to the corrisponding value of MP0_BASE in the renoir offset header file.
The reason we should only use MP0_BASE is There is only one set of per-IP headers MP
that includes all register definitions related to SMU IP block. This IP includes MP0, MP1, MP2
and  an ecryption engine that can be used only by MP0. As a result all register definitions from
MP file should be based only on MP0_BASE data.

[How]
Change MP1_BASE to MP0_BASE

Signed-off-by: joseph gravenor <joseph.gravenor@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: enable hostvm based on roimmu active for dcn2.1

[ Upstream commit 48d92e8eda3d9b61978377e7539bfc5958e850cf ]

Enabling hostvm when ROIMMU is not active seems to break GPUVM.
This fixes the issue by not enabling hostvm if ROIMMU is not
activated.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Lower throttling MCE messages' priority to warning

[ Upstream commit 9c3bafaa1fd88e4dd2dba3735a1f1abb0f2c7bb7 ]

On modern CPUs it is quite normal that the temperature limits are
reached and the CPU is throttled. In fact, often the thermal design is
not sufficient to cool the CPU at full load and limits can quickly be
reached when a burst in load happens. This will even happen with
technologies like RAPL limitting the long term power consumption of
the package.

Also, these limits are "softer", as Srinivas explains:

"CPU temperature doesn't have to hit max(TjMax) to get these warnings.
OEMs ha[ve] an ability to program a threshold where a thermal interrupt
can be generated. In some systems the offset is 20C+ (Read only value).

In recent systems, there is another offset on top of it which can be
programmed by OS, once some agent can adjust power limits dynamically.
By default this is set to low by the firmware, which I guess the
prime motivation of Benjamin to submit the patch."

So these messages do not usually indicate a hardware issue (e.g.
insufficient cooling). Log them as warnings to avoid confusion about
their severity.

 [ bp: Massage commit mesage. ]

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Christian Kellner <ckellner@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191009155424.249277-1-bberg@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()

[ Upstream commit eac9153f2b584c702cea02c1f1a57d85aa9aea42 ]

bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A
deadlock on rq_lock():

rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[...]
Call Trace:
 try_to_wake_up+0x1ad/0x590
 wake_up_q+0x54/0x80
 rwsem_wake+0x8a/0xb0
 bpf_get_stack+0x13c/0x150
 bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000
 bpf_overflow_handler+0x60/0x100
 __perf_event_overflow+0x4f/0xf0
 perf_swevent_overflow+0x99/0xc0
 ___perf_sw_event+0xe7/0x120
 __schedule+0x47d/0x620
 schedule+0x29/0x90
 futex_wait_queue_me+0xb9/0x110
 futex_wait+0x139/0x230
 do_futex+0x2ac/0xa50
 __x64_sys_futex+0x13c/0x180
 do_syscall_64+0x42/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This can be reproduced by:
1. Start a multi-thread program that does parallel mmap() and malloc();
2. taskset the program to 2 CPUs;
3. Attach bpf program to trace_sched_switch and gather stackmap with
   build-id, e.g. with trace.py from bcc tools:
   trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch

A sample reproducer is attached at the end.

This could also trigger deadlock with other locks that are nested with
rq_lock.

Fix this by checking whether irqs are disabled. Since rq_lock and all
other nested locks are irq safe, it is safe to do up_read() when irqs are
not disable. If the irqs are disabled, postpone up_read() in irq_work.

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com
Reproducer:
============================ 8< ============================

char *filename;

void *worker(void *p)
{
        void *ptr;
        int fd;
        char *pptr;

        fd = open(filename, O_RDONLY);
        if (fd < 0)
                return NULL;
        while (1) {
                struct timespec ts = {0, 1000 + rand() % 2000};

                ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
                usleep(1);
                if (ptr == MAP_FAILED) {
                        printf("failed to mmap\n");
                        break;
                }
                munmap(ptr, 4096 * 64);
                usleep(1);
                pptr = malloc(1);
                usleep(1);
                pptr[0] = 1;
                usleep(1);
                free(pptr);
                usleep(1);
                nanosleep(&ts, NULL);
        }
        close(fd);
        return NULL;
}

int main(int argc, char *argv[])
{
        void *ptr;
        int i;
        pthread_t threads[THREAD_COUNT];

        if (argc < 2)
                return 0;

        filename = argv[1];

        for (i = 0; i < THREAD_COUNT; i++) {
                if (pthread_create(threads + i, NULL, worker, NULL)) {
                        fprintf(stderr, "Error creating thread\n");
                        return 0;
                }
        }

        for (i = 0; i < THREAD_COUNT; i++)
                pthread_join(threads[i], NULL);
        return 0;
}
============================ 8< ============================

Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_core: fix init for HCI_USER_CHANNEL

[ Upstream commit eb8c101e28496888a0dcfe16ab86a1bee369e820 ]

During the setup() stage, HCI device drivers expect the chip to
acknowledge its setup() completion via vendor specific frames.

If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode,
the vendor specific frames are never tranmitted to the driver, as
they are filtered in hci_rx_work().

Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive
frames if the HCI device is is HCI_INIT state.

[1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html

Fixes: 23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Workaround directed advertising bug in Broadcom controllers

[ Upstream commit 4c371bb95cf06ded80df0e6139fdd77cee1d9a94 ]

It appears that some Broadcom controllers (eg BCM20702A0) reject LE Set
Advertising Parameters command if advertising intervals provided are not
within range for undirected and low duty directed advertising.

Workaround this bug by populating min and max intervals with 'valid'
values.

< HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15
        Min advertising interval: 0.000 msec (0x0000)
        Max advertising interval: 0.000 msec (0x0000)
        Type: Connectable directed - ADV_DIRECT_IND (high duty cycle) (0x01)
        Own address type: Public (0x00)
        Direct address type: Random (0x01)
        Direct address: E2:F0:7B:9F:DC:F4 (Static)
        Channel map: 37, 38, 39 (0x07)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Advertising Parameters (0x08|0x0006) ncmd 1
        Status: Invalid HCI Command Parameters (0x12)

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Tested-by: Sören Beye <linux@hypfer.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: missed cpu_to_le16 conversion in hci_init4_req

[ Upstream commit 727ea61a5028f8ac96f75ab34cb1b56e63fd9227 ]

It looks like in hci_init4_req() the request is being
initialised from cpu-endian data but the packet is specified
to be little-endian. This causes an warning from sparse due
to __le16 to u16 conversion.

Fix this by using cpu_to_le16() on the two fields in the packet.

net/bluetooth/hci_core.c:845:27: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:845:27:    expected restricted __le16 [usertype] tx_len
net/bluetooth/hci_core.c:845:27:    got unsigned short [usertype] le_max_tx_len
net/bluetooth/hci_core.c:846:28: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:846:28:    expected restricted __le16 [usertype] tx_time
net/bluetooth/hci_core.c:846:28:    got unsigned short [usertype] le_max_tx_time

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: avoid unused function warning

[ Upstream commit 42d22098127d6384f789107f59caae87d7520fc4 ]

The btusb_rtl_cmd_timeout() function is used inside of an
ifdef, leading to a warning when this part is hidden
from the compiler:

drivers/bluetooth/btusb.c:530:13: error: unused function 'btusb_rtl_cmd_timeout' [-Werror,-Wunused-function]

Use an IS_ENABLED() check instead so the compiler can see
the code and then discard it silently.

Fixes: d7ef0d1e3968 ("Bluetooth: btusb: Use cmd_timeout to reset Realtek device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: max1027: Reset the device at probe time

[ Upstream commit db033831b4f5589f9fcbadb837614a7c4eac0308 ]

All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/powerplay: avoid disabling ECC if RAS is enabled for VEGA20

[ Upstream commit df9331e561dab0a451cbd6a679ee88a95f306fd6 ]

Program THM_BACO_CNTL.SOC_DOMAIN_IDLE=1 will tell VBIOS to disable ECC when
BACO exit. This can save BACO exit time by PSP on none-ECC SKU. Drop the setting
for ECC supported SKU.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: usbfs: Suppress problematic bind and unbind uevents.

[ Upstream commit abb0b3d96a1f9407dd66831ae33985a386d4200d ]

commit 1455cf8dbfd0 ("driver core: emit uevents when device is bound
to a driver") added bind and unbind uevents when a driver is bound or
unbound to a physical device.

For USB devices which are handled via the generic usbfs layer (via
libusb for example), this is problematic:
Each time a user space program calls
   ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr);
and then later
   ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);
The kernel will now produce a bind or unbind event, which does not
really contain any useful information.

This allows a user space program to run a DoS attack against programs
which listen to uevents (in particular systemd/eudev/upowerd):
A malicious user space program just has to call in a tight loop

   ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr);
   ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);

With this loop the malicious user space program floods the kernel and
all programs listening to uevents with tons of bind and unbind
events.

This patch suppresses uevents for ioctls USBDEVFS_CLAIMINTERFACE and
USBDEVFS_RELEASEINTERFACE.

Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20191011115518.2801-1-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events arm64: Fix Hisi hip08 DDRC PMU eventname

[ Upstream commit 84b0975f4853ba32d2d9b3c19ffa2b947f023fb3 ]

The "EventName" for the DDRC precharge command event is incorrect, so
fix it.

Fixes: 57cc732479ba ("perf jevents: Add support for Hisi hip08 DDRC PMU aliasing")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1567612484-195727-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Avoid infinite loop for task exit case

[ Upstream commit 791ce9c48c79210d2ffcdbe69421e7783b32921f ]

When executing the task exit testing case, perf gets stuck in an endless
loop this case and doesn't return back on Arm64 Juno board.

After digging into this issue, since Juno board has Arm's big.LITTLE
CPUs, thus the PMUs are not compatible between the big CPUs and little
CPUs.  This leads to a PMU event that cannot be enabled properly when
the traced task is migrated from one variant's CPU to another variant.
Finally, the test case runs into infinite loop for cannot read out any
event data after return from polling.

Eventually, we need to work out formal solution to allow PMU events can
be freely migrated from one CPU variant to another, but this is a
difficult task and a different topic.  This patch tries to fix the Perf
test case to avoid infinite loop, when the testing detects 1000 times
retrying for reading empty events, it will directly bail out and return
failure.  This allows the Perf tool can continue its other test cases.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf report: Add warning when libunwind not compiled in

[ Upstream commit 800d3f561659b5436f8c57e7c26dd1f6928b5615 ]

We received a user report that call-graph DWARF mode was enabled in
'perf record' but 'perf report' didn't unwind the callstack correctly.
The reason was, libunwind was not compiled in.

We can use 'perf -vv' to check the compiled libraries but it would be
valuable to report a warning to user directly (especially valuable for
a perf newbie).

The warning is:

Warning:
Please install libunwind development packages during the perf build.

Both TUI and stdio are supported.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Report failure for mmap events

[ Upstream commit 6add129c5d9210ada25217abc130df0b7096ee02 ]

When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.

This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.

Fixes: d723a55096b8 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: dw-hdmi: Restore audio when setting a mode

[ Upstream commit fadfee3f9d8f114435a8a3e9f83a227600d89de7 ]

When setting a new display mode, dw_hdmi_setup() calls
dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
the audio clock.

We should only (re-)enable the audio clock if audio was already enabled
when setting the new mode.

Without this patch, on RK3288, there will be HDMI audio on some monitors
if i2s was played to headphone when the monitor was plugged.
ACER H277HU and ASUS PB278 are two of the monitors showing this issue.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtw88: coex: Set 4 slot mode for A2DP

[ Upstream commit 12078aae453556a88fb46777b7cc5fc97f867b7c ]

With shallow buffer size, certain BT devices have active
A2DP flow control to fill buffer frequently. If the slot
is not at BT side, data can't be sent successfully to BT
devices, and will cause audio glitch.

To resolve this issue, this commit splits TUs into 4-slots
instead of 2-slot for all of the A2DP related coexistence
strategies. That makes BT have higher opportunity to fill
the A2DP buffer in time, and the audio quality could be
more stable and smooth.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Correct error handling of dma_map_single()

[ Upstream commit d43810b2c1808ac865aa1a2a2c291644bf95345c ]

The return value of dma_map_single() should be checked for errors using
dma_mapping_error() and the skb has been dequeued so it needs to be
freed.

This was found when enabling CONFIG_DMA_API_DEBUG and it warned about the
missing dma_mapping_error() call.

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Use the correct function type for native_set_fixmap()

[ Upstream commit f53e2cd0b8ab7d9e390414470bdbd830f660133f ]

We call native_set_fixmap indirectly through the function pointer
struct pv_mmu_ops::set_fixmap, which expects the first parameter to be
'unsigned' instead of 'enum fixed_addresses'. This patch changes the
function type for native_set_fixmap to match the pointer, which fixes
indirect call mismatches with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190913211402.193018-1-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Program DWB watermarks from correct state

[ Upstream commit edb922b022c0c94805c4ffad202b3edff83d76f0 ]

[Why]
When diags adds a DWB via a stream update, we calculate MMHUBBUB
paramaters, but dc->current_state has not yet been updated
when the DWB programming happens. This leads to overflow on
high bandwidth tests since the incorrect MMHUBBUB arbitration
parameters are programmed.

[How]
Pass the updated context down to the (enable|update)_writeback functions
so that they can use the correct watermarks when programming MMHUBBUB.

Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: sm5502: Reset registers during initialization

[ Upstream commit 6942635032cfd3e003e980d2dfa4e6323a3ce145 ]

On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader
seems to keep interrupts enabled for SM5502 when booting Linux.
Changing the cable state (i.e. plugging in a cable) - until the driver
is loaded - will therefore produce an interrupt that is never read.

In this situation, the cable state will be stuck forever on the
initial state because SM5502 stops sending interrupts.
This can be avoided by clearing those pending interrupts after
the driver has been loaded.

One way to do this is to reset all registers to default state
by writing to SM5502_REG_RESET. This ensures that we start from
a clean state, with all interrupts disabled.

Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix dongle_caps containing stale information.

[ Upstream commit dd998291dbe92106d8c4a7581c409b356928d711 ]

[WHY]

During detection:
function: get_active_converter_info populates link->dpcd_caps.dongle_caps
only when dpcd_rev >= DPCD_REV_11 and DWN_STRM_PORTX_TYPE is
DOWN_STREAM_DETAILED_HDMI or DOWN_STREAM_DETAILED_DP_PLUS_PLUS.
Otherwise, it is not cleared, and stale information remains.

During mode validation:
function: dp_active_dongle_validate_timing reads
link->dpcd_caps.dongle_caps->dongle_type to determine the maximum
pixel clock to support. This information is now stale and no longer
valid.

[HOW]
dp_active_dongle_validate_timing should be using
link->dpcd_caps->dongle_type instead.

Signed-off-by: David Galiffi <david.galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

syscalls/x86: Use the correct function type in SYSCALL_DEFINE0

[ Upstream commit 8661d769ab77c675b5eb6c3351a372b9fbc1bf40 ]

Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid type mismatches
with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-2-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: add new active dongle to existent w/a

[ Upstream commit 566b4252fe9da9582dde008c5e9c3eb7c136e348 ]

[Why & How]
Dongle 0x00E04C power down all internal circuits including
AUX communication preventing reading DPCD table.
Encoder will skip DP RX power down on disable output
to keep receiver powered all the time.

Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage

[ Upstream commit 0bac73adea4df8d34048b38f6ff24dc3e73e90b6 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
   fail: v4l2-test-formats.cpp(736): \
Video Capture Multiplanar is valid, \
but TRY_FMT failed to return a format
   test VIDIOC_TRY_FMT: FAIL

This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.

VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: wait for set pipe mcp command completion

[ Upstream commit 15caeabc5787c15babad7ee444afe9c26df1c8b3 ]

[Why]
When the driver sends a pipe set command to the DMCU FW, it does not wait
for the command to complete. This can lead to unpredictable behavior if,
for example, the driver were to request a pipe disable to the FW via MCP,
then power down some hardware before the firmware has completed processing
the command.

[How]
Wait for the DMCU FW to finish processing set pipe commands

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Properly round nominal frequency for SPD

[ Upstream commit c59802313e84bede954235b3a5dd0dd5325f49c5 ]

[Why]
Some displays rely on the SPD verticle frequency maximum value.
Must round the calculated refresh rate to the nearest integer.

[How]
Round the nominal calculated refresh rate to the nearest whole
integer.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases

[ Upstream commit cf6acb73b050e98b5cc435fae0e8ae0157520410 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(691): ret == 0
   fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
   test MMAP: FAIL

This caused the following Kernel Warning:

WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<c020b5bc>] (dump_backtrace) from [<c020b8a0>] (show_stack+0x18/0x1c)
 r7:00000009 r6:60070013 r5:00000000 r4:c1053824
[<c020b888>] (show_stack) from [<c09232e8>] (dump_stack+0x90/0xa4)
[<c0923258>] (dump_stack) from [<c022b740>] (__warn+0xec/0x104)
  r7:00000009 r6:c0c0ad50 r5:00000000 r4:00000000
[<c022b654>] (__warn) from [<c022b810>] (warn_slowpath_null+0x28/0x30)
  r9:00000008 r8:00000000 r7:eced4808 r6:edbc9bac r5:eced4844
r4:eced4808
[<c022b7e8>] (warn_slowpath_null) from [<c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<c0726dd4>] (__vb2_queue_cancel) from [<c0727648>]
(vb2_core_queue_release+0x20/0x40)
  r10:ecc7bd70 r9:00000008 r8:00000000 r7:edb73010 r6:edbc9bac
r5:eced4844
  r4:eced4808 r3:00000004
[<c0727628>] (vb2_core_queue_release) from [<c0729528>]
(vb2_queue_release+0x10/0x14)
  r5:edbc9810 r4:eced4800
[<c0729518>] (vb2_queue_release) from [<c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<c0724cec>] (v4l2_m2m_ctx_release) from [<bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
  r5:edbc9810 r4:ed67a400
[<bf0e8eb4>] (vpe_release [ti_vpe]) from [<c070fccc>]
(v4l2_release+0x3c/0x80)
  r7:edb73010 r6:ed176aa0 r5:edbc9868 r4:ed5119c0
[<c070fc90>] (v4l2_release) from [<c033cf1c>] (__fput+0x8c/0x1dc)
  r5:ecc7bd70 r4:ed5119c0
[<c033ce90>] (__fput) from [<c033d0cc>] (____fput+0x10/0x14)
  r10:00000000 r9:ed5119c0 r8:ece392d0 r7:c1059544 r6:ece38d80
r5:ece392b4
  r4:00000000
[<c033d0bc>] (____fput) from [<c0246e00>] (task_work_run+0x98/0xb8)
[<c0246d68>] (task_work_run) from [<c022f1d8>] (do_exit+0x170/0xa80)
  r9:ece351fc r8:00000000 r7:ecde3f58 r6:ffffe000 r5:ece351c0
r4:ece38d80
[<c022f068>] (do_exit) from [<c022fb6c>] (do_group_exit+0x48/0xc4)
  r7:000000f8
[<c022fb24>] (do_group_exit) from [<c022fc00>]
(__wake_up_parent+0x0/0x28)
  r7:000000f8 r6:b6c6a798 r5:00000001 r4:00000001
[<c022fbe8>] (SyS_exit_group) from [<c0207c80>]
(ret_fast_syscall+0x0/0x4c)

These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.

In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic

[ Upstream commit a37980ac5be29b83da67bf7d571c6bd9f90f8e45 ]

v4l2-compliance fails with this message:

   warn: v4l2-test-formats.cpp(717): \
    TRY_FMT cannot handle an invalid pixelformat.
   test VIDIOC_TRY_FMT: FAIL

This causes the following kernel panic:

Unable to handle kernel paging request at virtual address 56595561
pgd = ecd80e00
*pgd=00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task: ece44d80 task.stack: ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8

Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.

Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: Make sure YUYV is set as default format

[ Upstream commit e20b248051ca0f90d84b4d9378e4780bc31f16c6 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(672): \
Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
   fail: v4l2-test-formats.cpp(672): \
Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
...
   test VIDIOC_TRY_FMT: FAIL

The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)

So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Fixes: 40cc823f7005 ("media: ti-vpe: Add support for NV21 format")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>