platform/kernel/u-boot.git
5 years agoARM: keystone2: update the default addresses of the secure monitor
Jean-Jacques Hiblot [Tue, 17 Sep 2019 21:18:25 +0000 (17:18 -0400)]
ARM: keystone2: update the default addresses of the secure monitor

To accommodate the growth of u-boot, we need to shift the location of the
secure monitor. Moving it 64kB further.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
5 years agoboard: ti: am654: Disable TRNG node for HS devices
Andrew F. Davis [Tue, 17 Sep 2019 21:15:40 +0000 (17:15 -0400)]
board: ti: am654: Disable TRNG node for HS devices

On HS devices the access to TRNG is restricted on the non-secure
ARM side, disable the node in DT to prevent firewall violations.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
5 years agoautoboot: add necessary dependency at AUTOBOOT_MENU_SHOW
AKASHI Takahiro [Thu, 12 Sep 2019 06:31:22 +0000 (15:31 +0900)]
autoboot: add necessary dependency at AUTOBOOT_MENU_SHOW

Otherwise, menu_show() will be undefined in bootdelay_process().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
5 years agoMAINTAINERS, git-mailrc: Update the maintainer for socfpga
Ley Foon Tan [Fri, 4 Oct 2019 08:43:50 +0000 (16:43 +0800)]
MAINTAINERS, git-mailrc: Update the maintainer for socfpga

This updates MAINTAINERS and git-mailrc to add me as maintainer for
socfpga.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
5 years agoMakefile: mrproper should remove *.pyc files
Heinrich Schuchardt [Thu, 3 Oct 2019 16:45:29 +0000 (16:45 +0000)]
Makefile: mrproper should remove *.pyc files

*.pyc files contain compiled Python bytecode. 'make mrproper' should remove
them.

Removing *.pyc files helps for instance sometimes when running into an
error "binman: Unknown entry type 'blob' in node '/binman/blob'".

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agoMakefile: Fix typo around CONFIG_SPL_FIT_SOURCE
Michal Simek [Wed, 2 Oct 2019 13:53:12 +0000 (15:53 +0200)]
Makefile: Fix typo around CONFIG_SPL_FIT_SOURCE

Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm: K3: Increase default SYSFW image size allocation
Andrew F. Davis [Tue, 1 Oct 2019 14:33:43 +0000 (10:33 -0400)]
arm: K3: Increase default SYSFW image size allocation

The memory allocated to store the FIT image containing SYSFW and board
configuration data is statically defined to the largest size expected.
This was 269000 bytes but now needs to be grown to 276000 to make room
for the signatures attached to the board configuration data on High
Security devices.

Signed-off-by: Andrew F. Davis <afd@ti.com>
5 years agoMerge tag 'rpi-next-2019.10.2' of https://github.com/mbgg/u-boot
Tom Rini [Tue, 1 Oct 2019 20:31:26 +0000 (16:31 -0400)]
Merge tag 'rpi-next-2019.10.2' of https://github.com/mbgg/u-boot

RPi4:
Fix amount of memory seen by the kernel.

5 years agoMerge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
Tom Rini [Tue, 1 Oct 2019 20:31:11 +0000 (16:31 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86

- Propagate acpi_rsdp_addr to x86 kernel via boot parameters

5 years agox86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
Andy Shevchenko [Fri, 13 Sep 2019 15:42:00 +0000 (18:42 +0300)]
x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters

This is reincarnation of the U-Boot

commit 3469bf4274540d1491d58e878a9edc0bdcba17ac
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date:   Wed Jan 10 19:40:15 2018 +0200

    x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters

after upstream got eventually the Linux kernel

commit e6e094e053af75cbc164e950814d3d084fb1e698
Author: Juergen Gross <jgross@suse.com>
Date:   Tue Nov 20 08:25:29 2018 +0100

    x86/acpi, x86/boot: Take RSDP address from boot params if available

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agorpi4: enable dram bank initialization
Matthias Brugger [Mon, 9 Sep 2019 16:31:56 +0000 (18:31 +0200)]
rpi4: enable dram bank initialization

When booting through the efi stub, the memory map get's created by
reading the dram bank information. Depending on the version of the RPi4
this information changes. Read the device tree to initialize the dram
bank data structure. This way the kernel is able to access the whole
range of available memory.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
5 years agoMerge tag 'u-boot-atmel-fixes-2019.10-a' of https://gitlab.denx.de/u-boot/custodians...
Tom Rini [Mon, 30 Sep 2019 11:21:38 +0000 (07:21 -0400)]
Merge tag 'u-boot-atmel-fixes-2019.10-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel fixes for 2019.10 cycle:

This includes only tiny cleanups on env changes related to 2019.10 new
features: removal of duplicate env settings (otherwise there may be
warnings in building..) and a small fix for flashes on Gardena smart
gateway (requires nand bad block tables).

5 years agoMerge tag 'u-boot-rockchip-20190928' of https://gitlab.denx.de/u-boot/custodians...
Tom Rini [Mon, 30 Sep 2019 11:20:35 +0000 (07:20 -0400)]
Merge tag 'u-boot-rockchip-20190928' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip

- Fix efuse read data number for rk3399
- make_fit_atf.py: fix .its generation for a single atf image

5 years agoat91: configs: Drop duplication of defconfig macros
Tudor Ambarus [Fri, 20 Sep 2019 10:52:58 +0000 (10:52 +0000)]
at91: configs: Drop duplication of defconfig macros

'commit a9221f3ebd6d ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")'
migrated CONFIG_ENV_ macros to defconfigs but did not remove the
identical redefinition of these macros in include/configs/.

Since the duplicated macros have the same value as the ones in defconfigs,
no "redefined" warnings were raised. Remove duplicated macros for all
sama5 and sam9x5ek boards.

While verifying that the removal of the macros from include/configs did
not change the same macros in defconfigs, overwrite the old defconfig by
saving them with the output from "make arch=ARM savedefconfig". This
resulted in the movement of some macros in the defconfig files.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
5 years agoarm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT
Stefan Roese [Tue, 27 Aug 2019 06:14:50 +0000 (08:14 +0200)]
arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT

This patch enables the BBT in NAND on the AT91SAM based GARDENA smart
Gateway. This is especially important, since the Linux driver also
enables this option and uses the BBT table pages. Without setting this
option, U-Boot will try to re-use these pages again (e.g. UBI).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Tom Rini <trini@konsulko.com>
5 years agorockchip: make_fit_atf.py: fix .its generation for a single atf image
Heiko Stuebner [Thu, 26 Sep 2019 19:15:15 +0000 (21:15 +0200)]
rockchip: make_fit_atf.py: fix .its generation for a single atf image

The commit 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property
set error") fixed the double-loading of the primary atf-image, but didn't
take into account that there may be rare atf images with only that main
section present.

Right now this will result in a broken its due to the loadables section not
getting closed correctly, so fix that by adapting the guards around the loop.

The guards now protect against 0 segments when the bl31 binary doesn't
contain any section and 1 segment when only a core atf section is present.

Fixes: 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agorockchip: misc: read the correct number of bytes from the efuse
Heiko Stuebner [Wed, 25 Sep 2019 18:40:56 +0000 (20:40 +0200)]
rockchip: misc: read the correct number of bytes from the efuse

Originally the cpuid var the value gets read into was defined as
    u8 cpuid[RK3399_CPUID_LEN];
hence the sizeof(cpuid) would return the correct the correct number
of array elements.

With the move to a separate function cpuid becomes a pointer and
sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case.

We do have the actual id length available as function param so use
it for actual amount of bytes to read.

Fixes: 04825384999f ("rockchip: rk3399: derive ethaddr from cpuid")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agoMerge tag 'efi-2019-10-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Thu, 26 Sep 2019 21:22:22 +0000 (17:22 -0400)]
Merge tag 'efi-2019-10-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc5

Bug fixes for the SetVariable() boot service.

5 years agoci: add envtools support
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:18 +0000 (13:06 +0200)]
ci: add envtools support

This commit add envtools suppport to CI to verify if there
is no build issues.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agoenv: add missing <compiler.h> header file
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:17 +0000 (13:06 +0200)]
env: add missing <compiler.h> header file

Since commit af95f20 ("env: Create a new file for environment functions"),
a new header file exists.

So, this commit add a missing header file.

Fixes:

include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’?
 ulong env_get_ulong(const char *name, int base, ulong default_val);
 ^~~~~
 long
include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’?
 ulong env_get_ulong(const char *name, int base, ulong default_val);

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
5 years agofw_env: fix build error
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:16 +0000 (13:06 +0200)]
fw_env: fix build error

The following error appears:

tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand
  rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE));

Fixes: d3716dd ("env: Rename the redundancy flags")

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Suggested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
5 years agofw_env: remove duplicated definitions
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:15 +0000 (13:06 +0200)]
fw_env: remove duplicated definitions

Since commit d3716dd ("env: Rename the redundancy flags"), the
definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved
to env.h.

Fixes:

tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol
 static unsigned char ENV_REDUND_ACTIVE = 1;
                      ^~~~~~~~~~~~~~~~~
In file included from tools/env/fw_env.c:13:
include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here
  ENV_REDUND_ACTIVE = 1,
  ^~~~~~~~~~~~~~~~~
tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol
 static unsigned char ENV_REDUND_OBSOLETE;
                      ^~~~~~~~~~~~~~~~~~~
In file included from tools/env/fw_env.c:13:
include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here
  ENV_REDUND_OBSOLETE = 0,

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
5 years agoefi_loader: SetVariable() deleting variables
Heinrich Schuchardt [Mon, 23 Sep 2019 20:38:53 +0000 (22:38 +0200)]
efi_loader: SetVariable() deleting variables

APPEND_WRITE with data length zero is allowable according to the UEFI
specification.

The EDK2 interpretation of no access attributes is attributes = 0. As
the UEFI specification is vague in this respect let's stick to EDK2 here.

Fixes: commit 6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoefi_loader: SetVariable() fix illegal return
Heinrich Schuchardt [Mon, 23 Sep 2019 20:18:09 +0000 (22:18 +0200)]
efi_loader: SetVariable() fix illegal return

We always have to return via EFI_EXIT() from EFIAPI functions.

Coverity reported an unreachable line and a resource leak.

Fixes: commit 6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE")
Reported-by: Coverity Scan CID 253575, CID 184095
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoefi_loader: description efi_stri_coll()
Heinrich Schuchardt [Sat, 21 Sep 2019 04:38:11 +0000 (06:38 +0200)]
efi_loader: description efi_stri_coll()

Remove outdated TODO for efi_stri_coll(). efi_stri_coll() is already using
the Unicode capitalization table.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoPrepare v2019.10-rc4 v2019.10-rc4
Tom Rini [Mon, 23 Sep 2019 16:24:39 +0000 (12:24 -0400)]
Prepare v2019.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
5 years agoconfigs: Resync with savedefconfig
Tom Rini [Mon, 23 Sep 2019 15:47:37 +0000 (11:47 -0400)]
configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
5 years agoMerge tag 'fixes-for-2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot...
Tom Rini [Sun, 22 Sep 2019 20:39:01 +0000 (16:39 -0400)]
Merge tag 'fixes-for-2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-video.git

- fix sunxi LCD clock divider
- fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO
- fix splash banner output with DM_VIDEO

5 years agoMerge tag 'efi-2019-10-rc4-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Sat, 21 Sep 2019 11:31:23 +0000 (07:31 -0400)]
Merge tag 'efi-2019-10-rc4-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc4 (5)

This patch set fixes errors in the UEFI sub-system and adds a function to
compare u16 strings which is prerequisite for further patches.

5 years agosunxi: video: HDMI: Fix LCD clock divider
Mark Kettenis [Fri, 9 Aug 2019 20:30:26 +0000 (22:30 +0200)]
sunxi: video: HDMI: Fix LCD clock divider

Currently we may end up with an LCD clock divider that differs from
the HDMI PHY clock divider if we can't exactly match the pixel clock.
Fix this by using DIV_ROUND_UP to calculate the divider.  This works
since the PLL is chosen such that the resulting pixel clock is
never higher than the requested pixel clock.

Fixes: 1feed358ed15 ("sunxi: video: HDMI: Fix clock setup")

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
5 years agosplash: fix splash banner output
Anatolij Gustschin [Fri, 20 Sep 2019 15:23:41 +0000 (17:23 +0200)]
splash: fix splash banner output

Old splash code in cfb_console driver displayed U-Boot version
string by default. Restore this behaviour for DM_VIDEO enabled
configurations.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Fabio Estevam <festevam@gmail.com>
5 years agoimx: mx6sabreauto: fix splash logo drawing
Anatolij Gustschin [Wed, 18 Sep 2019 15:40:21 +0000 (17:40 +0200)]
imx: mx6sabreauto: fix splash logo drawing

Enable BMP code. Also configure white on black for video console.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
5 years agoimx: colibri_imx6: fix splash logo drawing
Anatolij Gustschin [Wed, 18 Sep 2019 15:31:52 +0000 (17:31 +0200)]
imx: colibri_imx6: fix splash logo drawing

Define "splashimage" variable in the default environment
to enable splash screen drawing.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
5 years agoimx: icore: fix splash logo drawing
Anatolij Gustschin [Wed, 18 Sep 2019 15:23:45 +0000 (17:23 +0200)]
imx: icore: fix splash logo drawing

Define "splashimage" variable in the default environment
and enable BMP code. Also configure white on black for
video console.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
5 years agoimx: apalis_imx6: fix splash logo drawing
Anatolij Gustschin [Thu, 19 Sep 2019 15:19:01 +0000 (17:19 +0200)]
imx: apalis_imx6: fix splash logo drawing

Define "splashimage" variable in the default environment
to enable splash screen drawing.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
5 years agoimx: mx6sabresd: fix splash logo drawing
Anatolij Gustschin [Wed, 18 Sep 2019 15:05:31 +0000 (17:05 +0200)]
imx: mx6sabresd: fix splash logo drawing

After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
5 years agoimx: wandboard: fix splash logo drawing
Anatolij Gustschin [Wed, 18 Sep 2019 14:55:49 +0000 (16:55 +0200)]
imx: wandboard: fix splash logo drawing

After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
5 years agosplash: fix logo drawing if CONFIG_VIDEO_LOGO enabled
Anatolij Gustschin [Wed, 18 Sep 2019 14:47:33 +0000 (16:47 +0200)]
splash: fix logo drawing if CONFIG_VIDEO_LOGO enabled

After mxc_ipuv3 DM_VIDEO conversion board configs with enabled
CONFIG_VIDEO_LOGO do not show splash screen (previosly drawing
splash screen worked via cfb_console driver with CONFIG_VIDEO_LOGO
enabled). Use splash_source library for loading splash images
when CONFIG_SPLASH_SOURCE is selected, otherwise prepare built-in
video logo for drawing.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
5 years agoMerge tag 'u-boot-rockchip-20190920' of https://gitlab.denx.de/u-boot/custodians...
Tom Rini [Fri, 20 Sep 2019 21:43:33 +0000 (17:43 -0400)]
Merge tag 'u-boot-rockchip-20190920' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip

- Fix rk3288 tinker and evb SPL boot fail
- Enable get sn from cpuid for rk3399 rockpro64 board

5 years agotest: add tests for u16_str<n>cmp()
AKASHI Takahiro [Wed, 18 Sep 2019 01:26:30 +0000 (10:26 +0900)]
test: add tests for u16_str<n>cmp()

New seven test cases for u16_str<n>cmp() are added under Unicode unit test,
which should be executed by "ut unicode" command.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agolib: charset: add u16_str<n>cmp()
AKASHI Takahiro [Wed, 18 Sep 2019 01:26:29 +0000 (10:26 +0900)]
lib: charset: add u16_str<n>cmp()

u16 version of strcmp(): u16_strncmp() works like u16_strcmp() but only
at most n characters (in u16) are compared.
This function will be used in my UEFI secure boot patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoefi_loader: selftest: enable APPEND_WRITE tests
AKASHI Takahiro [Fri, 6 Sep 2019 06:09:53 +0000 (15:09 +0900)]
efi_loader: selftest: enable APPEND_WRITE tests

Now that APPEND_WRITE is supported,
the result check for the only existing test case should be changed to
'todo' to 'error', while two more test cases are added.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoefi_loader: variable: support APPEND_WRITE
AKASHI Takahiro [Fri, 6 Sep 2019 06:09:52 +0000 (15:09 +0900)]
efi_loader: variable: support APPEND_WRITE

If EFI_VARIABLE_APPEND_WRITE is specified in attributes at
efi_set_variable(), specified data will be appended to the variable's
original value. Attributes other than APPEND_WRITE should not be
modified.

With this patch, APPEND_WRITE test in 'variables' selftest will pass.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
5 years agoefi_loader: incorrect return value form DisconnectController
Heinrich Schuchardt [Fri, 13 Sep 2019 16:20:40 +0000 (18:20 +0200)]
efi_loader: incorrect return value form DisconnectController

DisconnectController() should never return EFI_NOT_FOUND.
If EFI_DRIVER_BINDING_PROTOCOL.Stop() fails, return EFI_DEVICE_ERROR.

If the driver handle does not expose the EFI_DRIVER_BINDING_PROTOCOL
return EFI_INVALID_PARAMETER.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoefi_loader: device_path: support Sandbox's "host" devices
AKASHI Takahiro [Thu, 12 Sep 2019 04:52:35 +0000 (13:52 +0900)]
efi_loader: device_path: support Sandbox's "host" devices

Sandbox's "host" devices are currently described as UCLASS_ROOT udevice
with DEV_IF_HOST block device. As the current implementation of
efi_device_path doesn't support such a type, any "host" device
on sandbox cannot be seen as a distinct object.

For example,
  => host bind 0 /foo/disk.img

  => efi devices
  Scanning disk host0...
  Found 1 disks
  Device           Device Path
  ================ ====================
  0000000015c19970 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)
  0000000015c19d70 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)

  => efi dh
  Handle           Protocols
  ================ ====================
  0000000015c19970 Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2, HII String, HII Database, HII Config Routing
  0000000015c19ba0 Driver Binding
  0000000015c19c10 Simple Text Output
  0000000015c19c80 Simple Text Input, Simple Text Input Ex
  0000000015c19d70 Block IO, Device Path, Simple File System

As you can see here, efi_root (0x0000000015c19970) and host0 device
(0x0000000015c19d70) have the same representation of device path.

This is not only inconvenient, but also confusing since two different
efi objects are associated with the same device path and
efi_dp_find_obj() will possibly return a wrong result.

Solution:
Each "host" device should be given an additional device path node
of "vendor device path" to make it distinguishable.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoMerge branch '2019-09-19-master-imports'
Tom Rini [Fri, 20 Sep 2019 14:47:03 +0000 (10:47 -0400)]
Merge branch '2019-09-19-master-imports'

- Coding style corrections in some RTC drivers.
- Small doc updates.
- Regression fix in part_test_dos()
- Regression fix on TI OMAP WDTs.
- Document deadline for CONFIG_DM migration.
- Switch Travis-CI to "xenial" release.

5 years agodm: MIGRATION: Add migration plan for CONFIG_DM
Heinrich Schuchardt [Mon, 16 Sep 2019 16:41:42 +0000 (18:41 +0200)]
dm: MIGRATION: Add migration plan for CONFIG_DM

For many sub-systems we already require the driver model to be used. Yet
there is still a handful of boards that do not have CONFIG_DM enabled.

We should make CONFIG_DM compulsory with release v2020.01

Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agowatchdog: omap_wdt: Fix WDT target reset when booted from emmc
Suniel Mahesh [Mon, 16 Sep 2019 08:09:17 +0000 (13:39 +0530)]
watchdog: omap_wdt: Fix WDT target reset when booted from emmc

AM335X based beaglebone black target gets reset by DM converted watchdog
if booted from emmc around 60sec. Fixed this by moving driver's private struct
variable initialization at different places in the driver to driver's probe.
Tested on Beaglebone Black.

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: 7659ea32 ("watchdog: omap_wdt: Convert watchdog driver to use DT and DM")
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
5 years agoscrapyard: Delete this file and script
Tom Rini [Fri, 13 Sep 2019 15:51:42 +0000 (11:51 -0400)]
scrapyard: Delete this file and script

The README.scrapyard file has been inconsistently updated.  While well
intentioned, bad data is worse than no data, and in this case a pointer
to use the history that git provides.  Remove the current content and
the script that would update it from time to time as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
5 years agodisk: part_dos: Allocate at least one block size for mbr
Faiz Abbas [Wed, 4 Sep 2019 14:40:12 +0000 (20:10 +0530)]
disk: part_dos: Allocate at least one block size for mbr

The blk_dread() following the mbr allocation reads one block from the
device. This will lead to overflow if block size is greater than the
size of legacy_mbr. Fix this by allocating at least one block size.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
5 years agokconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPL
Lukasz Majewski [Tue, 3 Sep 2019 13:43:55 +0000 (15:43 +0200)]
kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPL

This patch adds some commit info for CONFIG_IS_ENABLED(FOO) when used in
TPL context.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
5 years agodoc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examples
Lukasz Majewski [Tue, 3 Sep 2019 13:43:19 +0000 (15:43 +0200)]
doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examples

The of-plat.rst file till this change has been using

This is at best misleading as SPL_OF_PLATDATA is always defined when we
want to use this SPL tinification feature (also in U-Boot proper).
As a result the OF_PLATDATA SPL specific code is also compiled in when
U-Boot proper is build.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agortc: ds3231/ds3232: fix coding style
Biwen Li [Tue, 27 Aug 2019 07:32:36 +0000 (15:32 +0800)]
rtc: ds3231/ds3232: fix coding style

The patch fixes coding style

Signed-off-by: Biwen Li <biwen.li@nxp.com>
5 years agotravis.yml: change Ubuntu version to xenial
Ramon Fried [Mon, 12 Aug 2019 17:43:38 +0000 (20:43 +0300)]
travis.yml: change Ubuntu version to xenial

trusty is getting old, move to xenial (16.04)
to get updated gcc and other tools.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
5 years agorockchip: config: evb-rk3288: enable SPL_STACK_R
Kever Yang [Wed, 18 Sep 2019 09:56:42 +0000 (17:56 +0800)]
rockchip: config: evb-rk3288: enable SPL_STACK_R

We need a new STACK in SDRAM instead of SRAM so that the EMMC controller
can work properly. The EMMC/SD controller's master is not able to access
SRAM area, it can only access DRAM area.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
5 years agorockchip: evb-rk3288: Drop explicit SPL_TEXT
Kever Yang [Wed, 18 Sep 2019 09:56:41 +0000 (17:56 +0800)]
rockchip: evb-rk3288: Drop explicit SPL_TEXT

SPL_TEXT_BASE is 0x0 by default, based on the kconfig
definition move in below commit.

"configs: move CONFIG_SPL_TEXT_BASE to Kconfig"
(sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e)

So, don't define it explicitly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
5 years agoconfigs: rk3288: Increase bootm length
Jagan Teki [Tue, 17 Sep 2019 07:29:29 +0000 (12:59 +0530)]
configs: rk3288: Increase bootm length

Increase bootm length to 64MB satisfy max gunzip
size, even other rockchip and know SoC are following
same length check.

Reported-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
5 years agorockchip: rk3288-tinker: Attach missing peripherals at SPL
Michael Trimarchi [Tue, 17 Sep 2019 06:10:42 +0000 (11:40 +0530)]
rockchip: rk3288-tinker: Attach missing peripherals at SPL

Tinker board needs to mux all the sdmmc gpio and
activate the regulator connected to bank 7. Remove
all the bank that are not in use and mark them as dm,spl
so-that it would initialize at SPL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agoconfigs: tinker: Enable SDRAM, SPL stack
Jagan Teki [Tue, 17 Sep 2019 06:10:41 +0000 (11:40 +0530)]
configs: tinker: Enable SDRAM, SPL stack

SPL sets up SDRAM while in its board_init_f()
function, it is possible for the stack to move
there before board_init_r() is reached.

So it is required to reserve the stack for SDRAM,
with a proper location and size otherwise any
operations during SPL handoff would leads to failure.

On, this particular context tinker-rk3288 SPL is
failing to launch U-Boot proper on SDRAM due to
lack of stack.

 U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
 Trying to boot from MMC1
 spl: mmc init failed with error: -110
 SPL: failed to boot from all boot devices
 ### ERROR ### Please RESET the board ###

So, enable SPL_STACK_R_ADDR and it's related-config
items for SDRAM, SPL stack to setup properly.

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agoconfigs: tinker: Drop explicit SPL_TEXT
Jagan Teki [Tue, 17 Sep 2019 06:10:40 +0000 (11:40 +0530)]
configs: tinker: Drop explicit SPL_TEXT

SPL_TEXT_BASE is 0x0 by default, based on the kconfig
definition move in below commit.

"configs: move CONFIG_SPL_TEXT_BASE to Kconfig"
(sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e)

So, don't define it explicitly.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agorockchip: spi-boot-order: Trival fix to newline missing
Jagan Teki [Tue, 17 Sep 2019 06:10:39 +0000 (11:40 +0530)]
rockchip: spi-boot-order: Trival fix to newline missing

newline \n was missed in fdt_path_offset, error loop.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agoram: rk3288: Initialize dram for TPL builds
Jagan Teki [Tue, 17 Sep 2019 06:10:38 +0000 (11:40 +0530)]
ram: rk3288: Initialize dram for TPL builds

Few of the rk3288 boards like tinker, vyasa are using
TPL, SPL bootchain so the dram initialization must needed
during TPL stage. So add proper ifconstruct to satisfy
both TPL, SPL and SPL-only bootchain boards.

This eventually fixing TPL to SPL handoff, otherwise missing
dram initilaztion at TPL stage would leads to SPL hang.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agoconfigs: vyasa-rk3288: Fix SPL_TEXT_BASE
Jagan Teki [Tue, 17 Sep 2019 06:10:37 +0000 (11:40 +0530)]
configs: vyasa-rk3288: Fix SPL_TEXT_BASE

The initial Vyasa-rk3288 TPL implementation is to reuse the
SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively.

But the below commit implements the reverse way of using TEXT_BASE's
like 0xff704000 for TPL and 0x0 for SPL and which indeed update
the SPL_TEXT_BASE for vyasa-rk3288 board.
"rockchip: Kconfig: enable TPL support for rk3328"
(sha1: 3f47db0275e0f1c1e89d8f13f8b4cdc86b1038ca)

So, fix by dropping the legacy SPL_TEXT_BASE and it will
reassign 0x0 by default based on Kconfig definition.

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agorockchip: rk3288: vyasa: Drop ROCKCHIP_BROM_HELPER selection
Jagan Teki [Tue, 17 Sep 2019 06:10:36 +0000 (11:40 +0530)]
rockchip: rk3288: vyasa: Drop ROCKCHIP_BROM_HELPER selection

ROCKCHIP_BROM_HELPER is selected as if TPL/SPL ROCKCHIP_BACK_TO_BROM
has been defined, so drop the explicit enablement for vyasa board.

This change is supposed to missed during config move to
other locations, and missed to drop the same.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
5 years agoconfigs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSE
Hugh Cole-Baker [Mon, 9 Sep 2019 20:48:17 +0000 (21:48 +0100)]
configs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSE

This enables reading the cpuid from e-fuse, and deriving a static
MAC address from it. Without this, the ethernet interface on the
rockpro64 can't be used to boot.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
5 years agoMerge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Tom Rini [Mon, 16 Sep 2019 17:13:45 +0000 (13:13 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

- Add emmc hs200 support
- Few bug fixes related to serdes, I2C, ethernet, etc

5 years agoMerge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
Tom Rini [Mon, 16 Sep 2019 17:13:12 +0000 (13:13 -0400)]
Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi

- fix mvebu_a3700_spi clock prescale (Marek Behún)
- unmark MXS_SPI, DEPRECATED (Lukasz)
- add spi_write_then_read (Jagan)
- fix SST26* flash ICs (Eugeniy)
- fix soft_spi data abort (Christophe)

5 years agodoc: driver-model: Update SPI migration status
Jagan Teki [Fri, 13 Sep 2019 02:25:42 +0000 (07:55 +0530)]
doc: driver-model: Update SPI migration status

Update SPI drivers, driver model conversion status for
v2019.10 release.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agomtd: spi-nor: enable protection ops for SST26 flash series
Eugeniy Paltsev [Mon, 9 Sep 2019 19:33:15 +0000 (22:33 +0300)]
mtd: spi-nor: enable protection ops for SST26 flash series

Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework)
performs switch from previous 'spi_flash' infrastructure without
proper testing/investigations which results in a regressions for
SST26 flash series.

Enable protection ops for SST26 flash series which were
previously enabled by
Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs
protection ops)

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agomtd: spi-nor: add missing SST26* flash IC protection ops
Eugeniy Paltsev [Mon, 9 Sep 2019 19:33:14 +0000 (22:33 +0300)]
mtd: spi-nor: add missing SST26* flash IC protection ops

Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework)
performs switch from previous 'spi_flash' infrastructure without
proper testing/investigations which results in a regressions for
SST26 flash series.

Add missing SST26* flash IC protection ops which were introduced
previously by
Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs
protection ops)

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agomtd: spi: Drop sf.c
Jagan Teki [Mon, 22 Jul 2019 11:52:58 +0000 (17:22 +0530)]
mtd: spi: Drop sf.c

spi_write_then_read, will manage to do the respective
spi_xfer based on the tx_buf, rx_buf so drop the
legacy spi_flash_read/write/cm code.

Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agomtd: spi_dataflash: Use spi read then write
Jagan Teki [Mon, 22 Jul 2019 11:52:57 +0000 (17:22 +0530)]
mtd: spi_dataflash: Use spi read then write

Now, we have spi_write_then_read routine that would handle
spi_xfer handling based on the tx_buf and rx_buf parameters.

So, replace individual flash read/write/cmd transfer call
with spi_write_then_read.

Cc: Egnite GmbH <info@egnite.de>
Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
Cc: Ilko Iliev <iliev@ronetix.at>
Cc: Marek Vasut <marex@denx.de>
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Cc: Alison Wang <alison.wang@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: Add spi_write_then_read
Jagan Teki [Mon, 22 Jul 2019 11:52:56 +0000 (17:22 +0530)]
spi: Add spi_write_then_read

Add support for SPI synchronous write followed by read,
this is common interface call from spi-nor to spi drivers.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
5 years agospi: Kconfig: Unmark DEPRECATED for MXS_SPI
Lukasz Majewski [Thu, 1 Aug 2019 15:56:44 +0000 (17:56 +0200)]
spi: Kconfig: Unmark DEPRECATED for MXS_SPI

MXS_SPI driver now partially converted into driver-model,
so unmark the DEPRECATED option for the same.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
[jagan: update the commit message]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: soft_spi: Fix data abort if slave is not probed
Christophe Kerello [Fri, 2 Aug 2019 13:46:29 +0000 (15:46 +0200)]
spi: soft_spi: Fix data abort if slave is not probed

In case spi_get_bus_and_cs callback is used, spi bus is first probed
then slave devices are probed. To avoid a data abort in soft_spi probe
function, we need to check that (slave != NULL).

If slave is NULL, cs_flags and clk_flags will be initialized with
respectively GPIOD_ACTIVE_LOW and 0.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: mvebu_a3700_spi: Fix clock prescale computation
Marek Behún [Tue, 23 Jul 2019 14:49:32 +0000 (16:49 +0200)]
spi: mvebu_a3700_spi: Fix clock prescale computation

The prescaler value computation can yield wrong result if given 0x1f at
the beginning: the value is computed to be 0x20, but the maximum value
the register can hold 0x1f, so the actual stored value in this case is
0, which is obviously wrong.
Set the upper bound of the value to 0x1f with the min macro.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Mon, 16 Sep 2019 01:14:26 +0000 (21:14 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh

5 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Sat, 14 Sep 2019 23:56:09 +0000 (19:56 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

- Assorted bugfixes

5 years agoMerge branch '2019-09-13-ti-imports'
Tom Rini [Sat, 14 Sep 2019 23:53:24 +0000 (19:53 -0400)]
Merge branch '2019-09-13-ti-imports'

- Assorted K3 bugfixes.
- Assorted DM enablements, dead code removal.

5 years agosh: r2dplus: Enable DHCP command
Marek Vasut [Sat, 14 Sep 2019 17:22:09 +0000 (19:22 +0200)]
sh: r2dplus: Enable DHCP command

Enable the "dhcp" command as a minor convenience.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agosh: r2dplus: Fix missing PCI range
Marek Vasut [Sat, 14 Sep 2019 19:18:09 +0000 (21:18 +0200)]
sh: r2dplus: Fix missing PCI range

Add missing PCI range for translating DRAM to bus addresses.
This fixes e.g. PCI NIC interface and allows network to work
in QEMU.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agosh: Fix SH4 build with GCC versions without -m4-nofpu
Marek Vasut [Sat, 14 Sep 2019 17:05:38 +0000 (19:05 +0200)]
sh: Fix SH4 build with GCC versions without -m4-nofpu

Pass -m4 instead of -m4-nofpu to GCC versions which do not support
the -m4-nofpu option.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agosh: Fix incorrect linking with new binutils
Marek Vasut [Sat, 14 Sep 2019 17:03:32 +0000 (19:03 +0200)]
sh: Fix incorrect linking with new binutils

Since binutils 2.30 , the resulting U-Boot binary was incorrectly linked
against address 0 instead of text base, fix it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agoconfigs: am65x_hs_evm: Use FIT images when booting HS devices
Andrew F. Davis [Mon, 26 Aug 2019 21:51:01 +0000 (17:51 -0400)]
configs: am65x_hs_evm: Use FIT images when booting HS devices

HS devices use the FIT post processing step to authenticate boot images.
Set the configured boot command to load FIT by default.

Signed-off-by: Andrew F. Davis <afd@ti.com>
5 years agoconfigs: ti: Add environment support commands for FIT loading
Andrew F. Davis [Mon, 26 Aug 2019 21:51:00 +0000 (17:51 -0400)]
configs: ti: Add environment support commands for FIT loading

Some parts of these commands can be reused, add them to common files.

Signed-off-by: Andrew F. Davis <afd@ti.com>
5 years agoARM: dts: dra74x: Fix iodelay configuration for mmc3
Faiz Abbas [Tue, 27 Aug 2019 08:11:23 +0000 (13:41 +0530)]
ARM: dts: dra74x: Fix iodelay configuration for mmc3

According to the latest am572x[1] and dra74x[2] data manuals, mmc3
default, hs, sdr12 and sdr25 modes use iodelay values given in
MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is
selected and correct iodelay values are configured.

[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
5 years agoarm: k3: Use get_ti_sci_handle() where ever possible
Lokesh Vutla [Mon, 9 Sep 2019 07:17:38 +0000 (12:47 +0530)]
arm: k3: Use get_ti_sci_handle() where ever possible

Instead of calling uclass apis everywhere, use get_ti_sci_handle()
when ever ti_sci is needed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
5 years agoarm: k3: Fix getting ti_sci handle
Lokesh Vutla [Mon, 9 Sep 2019 07:17:37 +0000 (12:47 +0530)]
arm: k3: Fix getting ti_sci handle

API get_ti_sci_handle() is relying on the device-tree node name
to be "dmsc" for probing the ti_sci device. But with the introduction
of debug messages for dmsc, the node name changed to dmsc@44083000.
Because of this ti_sci is never probed cause a boot failure. Instead
of relying on device-tree node name, use the first available firmware
node for probing ti_sci.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
5 years agoARM: omapl138_lcdk: Enable Pinctrl
Adam Ford [Mon, 2 Sep 2019 11:52:04 +0000 (06:52 -0500)]
ARM: omapl138_lcdk: Enable Pinctrl

The single pinctrl supports the da8xx, so this patch enables
pinctrl in U-Boot.

Signed-off-by: Adam Ford <aford173@gmail.com>
5 years agoARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO Commands
Adam Ford [Mon, 2 Sep 2019 11:52:03 +0000 (06:52 -0500)]
ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO Commands

The da8xx GPIO driver is available with DM_GPIO support.  This
patch enables the CMD_GPIO, CMD_DM, and DM_GPIO and DA8XX_GPIO.

Signed-off-by: Adam Ford <aford173@gmail.com>
5 years agoARM: omapl138_lcdk: Disable SPL_DM_USB
Adam Ford [Mon, 2 Sep 2019 11:52:02 +0000 (06:52 -0500)]
ARM: omapl138_lcdk: Disable SPL_DM_USB

The USB was just recently enabled, so it is unlikely anyone is
using it in SPL, so this patch removes it from SPL to further
reduce the SPL code size.

Signed-off-by: Adam Ford <aford173@gmail.com>
5 years agoARM: omapl138_lcdk: Remove dead code
Adam Ford [Mon, 2 Sep 2019 11:52:01 +0000 (06:52 -0500)]
ARM: omapl138_lcdk: Remove dead code

The header it littered with #ifdefs and #defines and that appear
to be legacy associations to the older da850-evm and in some cases
obsolete with either Kconfig or DM migrations.  This patch removes
these legacy references.

Signed-off-by: Adam Ford <aford173@gmail.com>
5 years agoarm: am437x: cm-t43: Enable DM for MMC, USB, SPI, SPI_FLASH, enable BLK
Suniel Mahesh [Fri, 30 Aug 2019 20:06:13 +0000 (01:36 +0530)]
arm: am437x: cm-t43: Enable DM for MMC, USB, SPI, SPI_FLASH, enable BLK

Enable driver model for USB, MMC, SPI and SPI_FLASH. Also enable BLK.
This will remove the following compile warnings:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
====================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
5 years agoarm: am437x: cm-t43: Add device tree, enable OF_CONTROL
Suniel Mahesh [Fri, 30 Aug 2019 20:04:59 +0000 (01:34 +0530)]
arm: am437x: cm-t43: Add device tree, enable OF_CONTROL

Add device tree from Linux for driver model conversion
and enable OF_CONTROL. This will remove the following compile
warning:
==================================================
Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument
===================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
5 years agosoc: ti: k3-navss-ringacc: fix k3_nav_ringacc_ring_reset_dma
Vignesh Raghavendra [Fri, 30 Aug 2019 05:32:24 +0000 (11:02 +0530)]
soc: ti: k3-navss-ringacc: fix k3_nav_ringacc_ring_reset_dma

In case dma_ring_reset_quirk is not set the k3_ringacc_ring_reset_dma will
just exit without ring reset. Fix it, by adding ring reset call in case
dma_ring_reset_quirk is not.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
5 years agoMAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainers
Priyanka Jain [Mon, 9 Sep 2019 11:25:08 +0000 (16:55 +0530)]
MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainers

Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoMerge tag 'efi-2019-10-rc4-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Thu, 12 Sep 2019 14:35:46 +0000 (10:35 -0400)]
Merge tag 'efi-2019-10-rc4-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc4 (4)

Fixes for the EFI_FILE_PROTOCOL:

* correctly iterate over directories
* correct Unicode conversion of file names
* parameter checks

5 years agolx2160: Correct serdes frequency print.
Meenakshi Aggarwal [Wed, 4 Sep 2019 11:09:56 +0000 (16:39 +0530)]
lx2160: Correct serdes frequency print.

Suffix serdes frequency print with MHz

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
5 years agoarmv8: ls1028a: Updated serdes configuration for 0x13BB
Hou Zhiqiang [Wed, 4 Sep 2019 06:25:44 +0000 (06:25 +0000)]
armv8: ls1028a: Updated serdes configuration for 0x13BB

In SerDes protocol 0x13BB, lane C was erroneously assigned
to PCIE1, this is now updated to PCIE2

Fixes: 36f50b75238e ("armv8: ls1028a: Add other serdes
     protocal support")

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
5 years agoarmv8: fsl-layerscape: Fix typo in Layerscape PCIe config entry
Hou Zhiqiang [Tue, 27 Aug 2019 03:30:03 +0000 (03:30 +0000)]
armv8: fsl-layerscape: Fix typo in Layerscape PCIe config entry

The correct config entry is CONFIG_PCIE_LAYERSCAPE and this
typo results in skipping the fixup of Linux PCIe DT nodes.

Also enable the fixup when Layerscape Gen4 controller driver
is enabled.

Fixes: 4da0e52c9dc0 (armv8: fsl-layerscape: fix config dependency
     for layerscape pci code)

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>