Merge branch 'fixes' into next

mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF

Further testing of error cases revealed that downgrade is not enough, so
we need to reset the SCC which is done by calling the custom reset
function. This reset function can distinguish between the various SDHI
variants, so protecting the call with MIN_RCAR2 is enough here.

Fixes: 24ce2d7b8bea ("mmc: tmio: bring tuning HW to a sane state with MMC_POWER_OFF")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201125204953.3344-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E

The GL9763E uses 150Mhz (slow mode) by default in HS400 mode. In order
to make HS400 mode run at 200Mhz, the slow mode needs to be turned off.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20201125110145.2824-1-benchuanggli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci: Use more concise device_property_read_u64

Since we only need a single u64 the _array form is
unnecessarily. Use device_property_read_u64 instead.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201125033630.603863-1-jeremy.linton@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick: r592: Fix error return in r592_probe()

Fix to return a error code from the error handling case instead of 0.

Fixes: 926341250102 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20201125014718.153563-1-jingxiangfeng@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mxc: Convert the driver to DT-only

Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201123203004.18792-1-festevam@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mxs: Remove the unused .id_table

The mxs-mmc driver is only used by DT platforms and the .id_table
is unused.

Get rid of it to simplify the code.

While at it, use of_device_get_match_data() to retrieve the driver
data.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201123191956.10542-1-festevam@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/387cab3a466038aa5d1fc34b8b6a7c4f693826ea.1605896060.git.gustavoars@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci-gli: Reduce power consumption for GL9755

For GL9755, reduce power consumption by lowering the LFCLK and disabling
the DMACLK on low-power.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20201123053702.6083-1-benchuanggli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: depend on COMMON_CLK to fix compile tests

The MFD_OMAP_USB_HOST uses Common Clock Framework thus it cannot be
built on platforms without it (e.g. compile test on MIPS with LANTIQ):

    mips-linux-ld: drivers/mmc/host/mtk-sd.o: in function `msdc_ops_set_ios':
    mtk-sd.c:(.text+0x2bbc): undefined reference to `clk_get_parent'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201122120056.100045-1-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: pxamci: Fix error return code in pxamci_probe

Fix to return the error code from devm_gpiod_get_optional() instaed
of 0 in pxamci_probe().

Fixes: f54005b508b9a9d9c ("mmc: pxa: Use GPIO descriptor for power")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20201121021431.3168506-1-chengzhihao1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci: Update firmware interface API

The device_* calls were added a few years ago to abstract
DT/ACPI/fwnode firmware interfaces. Lets convert the two
sdhci caps fields to use the generic calls rather than the OF
specific ones. This has the side effect of allowing
ACPI based devices to quirk themselves when the caps field
is broken.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/r/20201120233831.447365-1-jeremy.linton@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC

Add a new compatible string corresponding to the MMC controller found
in the S500 variant of the Actions Semi Owl SoCs family.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/713f57f4a66fff9a50a8d93643a7987d6560becb.1605823502.git.cristian.ciocaltea@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge branch 'fixes' into next

mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC

The commit 16ada730a759 ("mmc: sdhci-of-arasan: Modify clock operations
handling") introduced support for platform specific clock operations.
Around the same point in time the commit 36c6aadaae86 ("mmc:
sdhci-of-arasan: Add support for Intel Keem Bay") was also  merged.
Unfortunate it was not really tested on top of the previously mentioned
commit, which causes clock registration failures for Keem Bay SOC devices.

Let's fix this, by properly declaring the clock operation for Keem Bay SOC
devices.

Fixes: 36c6aadaae86 ("mmc: sdhci-of-arasan: Add support for Intel Keem Bay")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201118120120.24908-2-muhammad.husaini.zulkifli@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: Extend recheck_sdio_irq fix to more variants

The SDIO recheck fix is required for more of the supported variants. Let's
add it to those that needs it.

Reported-by: Fabien Parent <fparent@baylibre.com>
Reported-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Link: https://lore.kernel.org/r/20201119030237.9414-1-yong.mao@mediatek.com
Fixes: 9e2582e57407 ("mmc: mediatek: fix SDIO irq issue")
Cc: stable@vger.kernel.org
[Ulf: Clarified commitmsg ]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick: fix a double-free bug in memstick_check

kfree(host->card) has been called in put_device so that
another kfree would raise cause a double-free bug.

Fixes: 0193383a5833 ("memstick: core: fix device_register() error handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201120074846.31322-1-miaoqinglang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-st: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).  This fixes
compile warning (!CONFIG_OF on x86_64):

    drivers/mmc/host/sdhci-st.c:512:34: warning:
        ‘st_sdhci_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162344.485921-2-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-sprd: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).  This fixes
compile warning (!CONFIG_OF on x86_64):

    drivers/mmc/host/sdhci-sprd.c:723:34: warning:
        ‘sdhci_sprd_of_match’ defined but not used [-Wunused-const-variable=]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20201120162344.485921-1-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: Fix system suspend/resume support for CQHCI

Before we got these errors on MT8192 platform:
[   59.153891] Restarting tasks ...
[   59.154540] done.
[   59.159175] PM: suspend exit
[   59.218724] mtk-msdc 11f60000.mmc: phase: [map:fffffffe] [maxlen:31]
[final:16]
[  119.776083] mmc0: cqhci: timeout for tag 9
[  119.780196] mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
[  119.786709] mmc0: cqhci: Caps:      0x100020b6 | Version:  0x00000510
[  119.793225] mmc0: cqhci: Config:    0x00000101 | Control:  0x00000000
[  119.799706] mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000000
[  119.806177] mmc0: cqhci: Int sig:   0x00000000 | Int Coal: 0x00000000
[  119.812670] mmc0: cqhci: TDL base:  0x00000000 | TDL up32: 0x00000000
[  119.819149] mmc0: cqhci: Doorbell:  0x003ffc00 | TCN:      0x00000200
[  119.825656] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[  119.832155] mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00001000
[  119.838627] mmc0: cqhci: SSC2:      0x00000000 | DCMD rsp: 0x00000000
[  119.845174] mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x0000891c
[  119.851654] mmc0: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
[  119.865773] mmc0: cqhci: : ===========================================
[  119.872358] mmc0: running CQE recovery
From these logs, we found TDL base was back to the default value.

After suspend, the mmc host is powered off by HW, and bring CQE register
to the default value, so we add system suspend/resume interface, then bring
CQE to deactivated state before suspend, it will be enabled by CQE first
request after resume.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Link: https://lore.kernel.org/r/20201118063405.24906-1-wenbin.mei@mediatek.com
Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support")
Cc: stable@vger.kernel.org
[Ulf: Renamed functions]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio: Fix command error processing

If some errors are detected at the same time as the access end
interrupt, the access end interrupt was not cleared. Especially with
DMA, because then the access end interrupt was never enabled and, thus,
never cleared. Clear the interrupt register always when a command error
occurs.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[saito: rebase to v5.4]
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: rebase and extension of the commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20201117131337.35307-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-esdhc-imx: Convert the driver to DT-only

Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20201117113750.25053-1-festevam@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge branch 'fixes' into next

mmc: tmio: do not print real IOMEM pointer

Printing kernel pointers is discouraged because they might leak kernel
memory layout.  This fixes smatch warning:

    drivers/mmc/host/tmio_mmc.c:177 tmio_mmc_probe() warn: argument 3 to %08lx specifier is cast from pointer

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201116164252.44078-1-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci: tegra: fix wrong unit with busy_timeout

'busy_timeout' is in msecs, not in jiffies. Use the correct factor.

Fixes: 5e958e4aacf4 ("sdhci: tegra: Implement Tegra specific set_timeout callback")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201116132206.23518-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Issue DLL reset explicitly

In the current implementation DLL reset will be issued for
each ITAP and OTAP setting inside ATF, this is creating issues
in some scenarios and this sequence is not inline with the TRM.
To fix the issue, DLL reset should be removed from the ATF and
host driver will request it explicitly.
This patch update host driver to explicitly request for DLL reset
before ITAP (assert DLL) and after OTAP (release DLL) settings.

Fixes: a5c8b2ae2e51 ("mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1605515565-117562-4-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Use Mask writes for Tap delays

Mask the ITAP and OTAP delay bits before updating with the new
tap value for Versal platform.

Fixes: 1a470721c8f5 ("sdhci: arasan: Add support for Versal Tap Delays")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1605515565-117562-3-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Allow configuring zero tap values

Allow configuring the Output and Input tap values with zero to avoid
failures in some cases (one of them is SD boot mode) where the output
and input tap values may be already set to non-zero.

Fixes: a5c8b2ae2e51 ("mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1605515565-117562-2-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: host: Kconfig: fix spelling mistake "hardare" -> "hardware"

There is a spelling mistake in the Kconfig file. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201114120819.416311-1-colin.king@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-msm: detect if tassadar_dll is used by using core version

Detect if tassadar_dll is required by using core version rather than
just specifying it in the sdhci_msm_variant_info.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/20201112173636.360186-1-dmitry.baryshkov@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci: Prefer SDR25 timing for High Speed mode for BYT-based Intel controllers

A UHS setting of SDR25 can give better results for High Speed mode.
This is because there is no setting corresponding to high speed.  Currently
SDHCI sets no value, which means zero which is also the setting for SDR12.
There was an attempt to change this in sdhci.c but it caused problems for
some drivers, so it was reverted and the change was made to sdhci-brcmstb
in commit 2fefc7c5f7d16e ("mmc: sdhci-brcmstb: Fix incorrect switch to HS
mode").  Several other drivers also do this.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v5.4+
Link: https://lore.kernel.org/r/20201112133656.20317-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: fix mem leak in msdc_drv_probe

It should use mmc_free_host to free mem in error patch of
msdc_drv_probe.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com>
Link: https://lore.kernel.org/r/20201112092530.32446-1-zhengliang6@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: sort includes

Better prevent double includes.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201111100244.15823-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: don't hardcode SDIF values

Use a macro to name the hardcoded values. Also, move the SDIF register
definition into the SDHI driver because this is an SDHI extension.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201111100244.15823-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: improve HOST_MODE usage

HOST_MODE should have a CTL_ prefix, too. This makes the code more
readable because we immediately know what it is. Also, remove the
hardcoded values with something readable, too.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201111100244.15823-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: remove superfluous SCLKEN

All previously called functions handle SCLKEN on their own, no need to
enable it again in sdhi_reset().

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110162151.37622-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: merge the SCC reset functions

There is no user of renesas_sdhi_reset_scc() anymore, only
renesas_sdhi_disable_scc() so merge these functions into one. I guess
the seperation was cruft anyhow. The BSP doesn't have it anymore and I
can't recall the reason we had it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110162151.37622-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: clear TAPEN when resetting, too

We want to clear TAPEN in a software reset, too, to have a completely
known state. Especially when we doing the initial reset during boot to
clear previous firmware states.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110162151.37622-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: simplify reset routine a little

The 'reset' pointer is only populated for Gen2+. So, we don't need to
check for that flag inside the routine.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110142058.36393-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: populate SCC pointer at the proper place

The SCC pointer is currently filled whenever the SoC is Gen2+. This is
wrong because there is a Gen2-variant without SCC (SDHI_VER_GEN2_SDR50).
We have been lucky because the writes to unintended registers have not
caused problems so far. But further refactoring work exposed the
problem. So, move the pointer initialization to the place where we know
that the SDHI instance supports tuning. And also populate the 'reset'
pointer unconditionally to make sure the interrupt enable register is
always properly set for Gen2+.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110142058.36393-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup

Setting up the SCC parameters does not need a probed TMIO device. But in
the near future, probing the TMIO device needs the SCC parameters setup.
So, fix the ordering.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110142058.36393-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: only reset SCC when its pointer is populated

Only re-initialize SCC and tuning when an SCC was found during probe().
This is currently a noop because all R-Car Gen2+ are considered to have
an SCC. But this will change in a later patch, so we need this
preparation.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110142058.36393-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: owl-mmc: use true and false for bool variables

Fix coccicheck warnings:

./owl-mmc.c:524:2-18: WARNING: Assignment of 0/1 to bool variable
./owl-mmc.c:528:2-18: WARNING: Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1604888706-63429-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pic32: Make pic32_sdhci_probe_platform() void

pic32_sdhci_probe_platform() always returned 0, so there's no reason for
a return value.  In addition, pic32_sdhci_probe() checked the return value
for possible error which is unnecessary.

Convert pic32_sdhci_probe_platform() to a void function and remove the
return value check. Fix the following Coccinelle warning:

./drivers/mmc/host/sdhci-pic32.c:127:5-8: Unneeded variable: "ret". Return "0" on line 137

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1604847648-13036-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: dw_mmc: replace spin_lock_irqsave by spin_lock in hard IRQ

The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1604627813-59785-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: meson-gx: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).  This fixes
compile warning (!CONFIG_OF && !CONFIG_MODULES):

    drivers/mmc/host/meson-gx-mmc.c:1252:34: warning:
        ‘meson_mmc_of_match’ defined but not used [-Wunused-const-variable=]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201103163046.14336-1-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Fix clock timing for RTS5261

This patch fix clock timing for RTS5261, using 256 divide
for the version higher than version C.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397321-3026-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Add hardware auto power off for RTS5261

This patch enable hardware auto power off when card is removed.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397312-2991-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Add CD & WP reverse support for RTS5261

This patch add CD & WP reverse support for RTS5261

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397305-2956-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Check mmc support for RTS5261

This patch check mmc support when RTS5261 initialize,
and not support mmc default.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397298-2921-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Fix PAD driving for RTS5261

This patch fix PAD driving for RTS5261

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397291-2885-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Fix aspm for RTS5261

This patch fix the bug that LDO is off when aspm is enabled.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397285-2850-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Fix OCP function for RTS5261

This patch fix the bug that when there is over current but
reader can't enable OCP.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397278-2815-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: rtsx: Add test mode for RTS5261

This patch add test mode for RTS5261.
If test mode is set, reader will switch to SD Express mode
mandatorily, and this mode is used by factory testing only.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397269-2780-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: add HS400 enhanced strobe support

Add support for HS400ES mode to MediaTek MMC Card Driver.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Link: https://lore.kernel.org/r/20201102092822.5301-2-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: owl-mmc: replace spin_lock_irqsave by spin_lock in hard IRQ

The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1604278337-55624-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: meson-mx-sdio: replace spin_lock_irqsave by spin_lock in hard IRQ

The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/1604375323-33556-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: moxart: replace spin_lock_irqsave by spin_lock in hard IRQ

The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1604021319-31338-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: davinci: remove unneeded semicolon

A semicolon is not needed after a switch statement.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201031152708.2146690-1-trix@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick: tifm: remove unneeded semicolon

A semicolon is not needed after a switch statement.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201031142756.2140029-1-trix@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick: mspro_block: remove unneeded semicolon

A semicolon is not needed after a switch statement.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201031134818.2135446-1-trix@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick: jmb38x_ms: remove unneeded semicolon

A semicolon is not needed after a switch statement.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201031142505.2139539-1-trix@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: rtsx_pci: Add SD Express mode support for RTS5261

RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows.
1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag.
2.If card is plugged in, Host send CMD8 to ask card's PCIe availability.
3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked,
RTS5261 switch to PCIe/NVMe mode.
4.Mmc driver handover it to NVMe driver.
5.If card is unplugged, RTS5261 will switch to SD mode.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Link: https://lore.kernel.org/r/1603936703-3403-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

misc: rtsx: Add SD Express mode support for RTS5261

RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows.
1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag.
2.If card is plugged in, Host send CMD8 to ask card's PCIe availability.
3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked,
RTS5261 switch to PCIe/NVMe mode.
4.Mmc driver handover it to NVMe driver.
5.If card is unplugged, RTS5261 will switch to SD mode.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1603936668-3363-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: Initial support for SD express card/host

In the SD specification v7.10 the SD express card has been added. This new
type of removable SD card, can be managed via a PCIe/NVMe based interface,
while also allowing backwards compatibility towards the legacy SD
interface.

To keep the backwards compatibility, it's required to start the
initialization through the legacy SD interface. If it turns out that the
mmc host and the SD card, both supports the PCIe/NVMe interface, then a
switch should be allowed.

Therefore, let's introduce some basic support for this type of SD cards to
the mmc core. The mmc host, should set MMC_CAP2_SD_EXP if it supports this
interface and MMC_CAP2_SD_EXP_1_2V, if also 1.2V is supported, as to inform
the core about it.

To deal with the switch to the PCIe/NVMe interface, the mmc host is
required to implement a new host ops, ->init_sd_express(). Based on the
initial communication between the host and the card, host->ios.timing is
set to either MMC_TIMING_SD_EXP or MMC_TIMING_SD_EXP_1_2V, depending on if
1.2V is supported or not. In this way, the mmc host can check these values
in its ->init_sd_express() ops, to know how to proceed with the handover.

Note that, to manage card insert/removal, the mmc core sticks with using
the ->get_cd() callback, which means it's the host's responsibility to make
sure it provides valid data, even if the card may be managed by PCIe/NVMe
at the moment. As long as the card seems to be present, the mmc core keeps
the card powered on.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Rui Feng <rui_feng@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1603936636-3126-1-git-send-email-rui_feng@realsil.com.cn

mmc: mediatek: Replace spin_lock_irqsave by spin_lock in hard IRQ

The code has been in a irq-disabled context since it is hard IRQ. Therefore
there no need to do it again.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1603068193-44688-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: Add subsys clock control for MT8192 msdc

MT8192 msdc is an independent sub system, we need control more bus
clocks for it.
Add support for the additional subsys clocks to allow it to be
configured appropriately.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20201014030846.12428-5-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: Add support for MT8192 SoC

MT8192 mmc host IP is compatible with MT8183, let's add support for this.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Link: https://lore.kernel.org/r/20201014030846.12428-3-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: Convert mtk-sd to json-schema

Convert the mtk-sd binding to DT schema format using json-schema.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201014030846.12428-2-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-acpi: AMDI0040: Allow changing HS200/HS400 driver strength

This change will allow platform designers better control over signal
integrity by allowing them to tune the HS200 and HS400 driver strengths.

The driver strength was previously hard coded to A to solve boot
problems with certain platforms. This driver strength does not
universally apply to all platforms so we need a knob to adjust it.

All older platforms currently have the SDR104 preset hard coded to A in
the firmware. This means that switching from the hard coded value in
the kernel to reading the SDR104 preset is a no-op for these platforms.
Newer platforms will have properly set presets. So this change will
support both new and old platforms.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Victor Ding <victording@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201027084612.528301-1-victording@google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sunxi: drop of_match_ptr from of_device_id table

The driver can match only via DT table so it should be always used and
the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant for sunxi).  This
fixes compile warning:

    drivers/mmc/host/sunxi-mmc.c:1181:34: warning: ‘sunxi_mmc_of_match’ defined but not used [-Wunused-const-variable=]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201026153810.89512-3-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: s3cmci: enable compile testing

The driver can be compile tested to increase build coverage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201026153810.89512-2-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: s3cmci: include GPIO descriptor consumer header

The driver uses GPIO Descriptor Consumer Interface so include proper
header to fix compile test errors like:

    drivers/mmc/host/s3cmci.c: In function ‘s3cmci_check_sdio_irq’:
    drivers/mmc/host/s3cmci.c:304:7: error:
        implicit declaration of function ‘gpiod_get_value’; did you mean ‘gpio_get_value’? [-Werror=implicit-function-declaration]

    drivers/mmc/host/s3cmci.c: In function ‘s3cmci_probe_pdata’:
    drivers/mmc/host/s3cmci.c:1451:19: error:
        implicit declaration of function ‘devm_gpiod_get_index’ [-Werror=implicit-function-declaration]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201026153810.89512-1-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Linux 5.10-rc4

Merge tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Nouveau fixes:

   - atomic modesetting regression fix

   - ttm pre-nv50 fix

   - connector NULL ptr deref fix"

* tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere
  drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50
  drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth

Merge branch 'linux-5.10' of git://github.com/skeggsb/linux into drm-fixes

- atomic modesetting regression fix
- ttm pre-nv50 fix
- connector NULL ptr deref fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5D9p78MNN0OxVeRZxN8LDqcadJEGUEFCgWJQ6+_rjPuw@mail.gmail.com

Merge tag 'char-misc-5.10-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/whatever driver fixes for 5.10-rc4.

  Nothing huge, lots of small fixes for reported issues:

   - habanalabs driver fixes

   - speakup driver fixes

   - uio driver fixes

   - virtio driver fix

   - other tiny driver fixes

  Full details are in the shortlog.

  All of these have been in linux-next for a full week with no reported
  issues"

* tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  uio: Fix use-after-free in uio_unregister_device()
  firmware: xilinx: fix out-of-bounds access
  nitro_enclaves: Fixup type and simplify logic of the poll mask setup
  speakup ttyio: Do not schedule() in ttyio_in_nowait
  speakup: Fix clearing selection in safe context
  speakup: Fix var_id_t values and thus keymap
  virtio: virtio_console: fix DMA memory allocation for rproc serial
  habanalabs/gaudi: mask WDT error in QMAN
  habanalabs/gaudi: move coresight mmu config
  habanalabs: fix kernel pointer type
  mei: protect mei_cl_mtu from null dereference

Merge tag 'usb-5.10-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt fixes from Greg KH:
 "Here are some small Thunderbolt and USB driver fixes for 5.10-rc4 to
  solve some reported issues.

  Nothing huge in here, just small things:

   - thunderbolt memory leaks fixed and new device ids added

   - revert of problem patch for the musb driver

   - new quirks added for USB devices

   - typec power supply fixes to resolve much reported problems about
     charging notifications not working anymore

  All except the cdc-acm driver quirk addition have been in linux-next
  with no reported issues (the quirk patch was applied on Friday, and is
  self-contained)"

* tag 'usb-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode
  MAINTAINERS: add usb raw gadget entry
  usb: typec: ucsi: Report power supply changes
  xhci: hisilicon: fix refercence leak in xhci_histb_probe
  Revert "usb: musb: convert to devm_platform_ioremap_resource_byname"
  thunderbolt: Add support for Intel Tiger Lake-H
  thunderbolt: Only configure USB4 wake for lane 0 adapters
  thunderbolt: Add uaccess dependency to debugfs interface
  thunderbolt: Fix memory leak if ida_simple_get() fails in enumerate_services()
  thunderbolt: Add the missed ida_simple_remove() in ring_request_msix()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Fixes for ARM and x86, the latter especially for old processors
  without two-dimensional paging (EPT/NPT)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use
  KVM: SVM: Update cr3_lm_rsvd_bits for AMD SEV guests
  KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch
  KVM: x86: clflushopt should be treated as a no-op by emulation
  KVM: arm64: Handle SCXTNUM_ELx traps
  KVM: arm64: Unify trap handlers injecting an UNDEF
  KVM: arm64: Allow setting of ID_AA64PFR0_EL1.CSV2 from userspace

Merge tag 'x86-urgent-2020-11-15' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A small set of fixes for x86:

   - Cure the fallout from the MSI irqdomain overhaul which missed that
     the Intel IOMMU does not register virtual function devices and
     therefore never reaches the point where the MSI interrupt domain is
     assigned. This made the VF devices use the non-remapped MSI domain
     which is trapped by the IOMMU/remap unit

   - Remove an extra space in the SGI_UV architecture type procfs output
     for UV5

   - Remove a unused function which was missed when removing the UV BAU
     TLB shootdown handler"

* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  iommu/vt-d: Cure VF irqdomain hickup
  x86/platform/uv: Fix copied UV5 output archtype
  x86/platform/uv: Drop last traces of uv_flush_tlb_others

Merge tag 'perf-urgent-2020-11-15' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "A set of fixes for perf:

    - A set of commits which reduce the stack usage of various perf
      event handling functions which allocated large data structs on
      stack causing stack overflows in the worst case

    - Use the proper mechanism for detecting soft interrupts in the
      recursion protection

    - Make the resursion protection simpler and more robust

    - Simplify the scheduling of event groups to make the code more
      robust and prepare for fixing the issues vs. scheduling of
      exclusive event groups

    - Prevent event multiplexing and rotation for exclusive event groups

    - Correct the perf event attribute exclusive semantics to take
      pinned events, e.g. the PMU watchdog, into account

    - Make the anythread filtering conditional for Intel's generic PMU
      counters as it is not longer guaranteed to be supported on newer
      CPUs. Check the corresponding CPUID leaf to make sure

    - Fixup a duplicate initialization in an array which was probably
      caused by the usual 'copy & paste - forgot to edit' mishap"

* tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Fix Add BW copypasta
  perf/x86/intel: Make anythread filter support conditional
  perf: Tweak perf_event_attr::exclusive semantics
  perf: Fix event multiplexing for exclusive groups
  perf: Simplify group_sched_in()
  perf: Simplify group_sched_out()
  perf/x86: Make dummy_iregs static
  perf/arch: Remove perf_sample_data::regs_user_copy
  perf: Optimize get_recursion_context()
  perf: Fix get_recursion_context()
  perf/x86: Reduce stack usage for x86_pmu::drain_pebs()
  perf: Reduce stack usage of perf_output_begin()

Merge tag 'sched-urgent-2020-11-15' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler fixes:

   - Address a load balancer regression by making the load balancer use
     the same logic as the wakeup path to spread tasks in the LLC domain

   - Prefer the CPU on which a task run last over the local CPU in the
     fast wakeup path for asymmetric CPU capacity systems to align with
     the symmetric case. This ensures more locality and prevents massive
     migration overhead on those asymetric systems

   - Fix a memory corruption bug in the scheduler debug code caused by
     handing a modified buffer pointer to kfree()"

* tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix memory corruption caused by multiple small reads of flags
  sched/fair: Prefer prev cpu in asymmetric wakeup path
  sched/fair: Ensure tasks spreading in LLC during LB

Merge tag 'locking-urgent-2020-11-15' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Two fixes for the locking subsystem:

   - Prevent an unconditional interrupt enable in a futex helper
     function which can be called from contexts which expect interrupts
     to stay disabled across the call

   - Don't modify lockdep chain keys in the validation process as that
     causes chain inconsistency"

* tag 'locking-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Avoid to modify chain keys in validate_chain()
  futex: Don't enable IRQs unconditionally in put_pi_state()

Merge branch 'for-5.10-fixes' of git://git./linux/kernel/git/dennis/percpu

Pull percpu fix and cleanup from Dennis Zhou:
 "A fix for a Wshadow warning in the asm-generic percpu macros came in
  and then I tacked on the removal of flexible array initializers in the
  percpu allocator"

* 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: convert flexible array initializers to use struct_size()
  asm-generic: percpu: avoid Wshadow warning

kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use

In some cases where shadow paging is in use, the root page will
be either mmu->pae_root or vcpu->arch.mmu->lm_root.  Then it will
not have an associated struct kvm_mmu_page, because it is allocated
with alloc_page instead of kvm_mmu_alloc_page.

Just return false quickly from is_tdp_mmu_root if the TDP MMU is
not in use, which also includes the case where shadow paging is
enabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (migration, vmscan, slub,
  gup, memcg, hugetlbfs), mailmap, kbuild, reboot, watchdog, panic, and
  ocfs2"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  ocfs2: initialize ip_next_orphan
  panic: don't dump stack twice on warn
  hugetlbfs: fix anon huge page migration race
  mm: memcontrol: fix missing wakeup polling thread
  kernel/watchdog: fix watchdog_allowed_mask not used warning
  reboot: fix overflow parsing reboot cpu number
  Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"
  compiler.h: fix barrier_data() on clang
  mm/gup: use unpin_user_pages() in __gup_longterm_locked()
  mm/slub: fix panic in slab_alloc_node()
  mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov
  mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit
  mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate
  mm/compaction: count pages and stop correctly during page isolation

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Two small clk driver fixes:

   - Make to_clk_regmap() inline to avoid compiler annoyance

   - Fix critical clks on i.MX imx8m SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx8m: fix bus critical clk registration
  clk: define to_clk_regmap() as inline function

Merge tag 'hwmon-for-v5.10-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix potential bufer overflow in pmbus/max20730 driver

 - Fix locking issue in pmbus core

 - Fix regression causing timeouts in applesmc driver

 - Fix RPM calculation in pwm-fan driver

 - Restrict counter visibility in amd_energy driver

* tag 'hwmon-for-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (amd_energy) modify the visibility of the counters
  hwmon: (applesmc) Re-work SMC comms
  hwmon: (pwm-fan) Fix RPM calculation
  hwmon: (pmbus) Add mutex locking for sysfs reads
  hwmon: (pmbus/max20730) use scnprintf() instead of snprintf()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Three small fixes, all in the embedded ufs driver subsystem"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufshcd: Fix missing destroy_workqueue()
  scsi: ufs: Try to save power mode change and UIC cmd completion timeout
  scsi: ufs: Fix unbalanced scsi_block_reqs_cnt caused by ufshcd_hold()

Merge tag 'selinux-pr-20201113' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
 "One small SELinux patch to make sure we return an error code when an
  allocation fails. It passes all of our tests, but given the nature of
  the patch that isn't surprising"

* tag 'selinux-pr-20201113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: Fix error return code in sel_ib_pkey_sid_slow()

Merge tag 'for-linus-5.10-rc4' of git://git./linux/kernel/git/rw/uml

Pull uml fix from Richard Weinberger:
 "Call PMD destructor in __pmd_free_tlb()"

* tag 'for-linus-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Call pgtable_pmd_page_dtor() in __pmd_free_tlb()

afs: Fix afs_write_end() when called with copied == 0 [ver #3]

When afs_write_end() is called with copied == 0, it tries to set the
dirty region, but there's no way to actually encode a 0-length region in
the encoding in page->private.

"0,0", for example, indicates a 1-byte region at offset 0.  The maths
miscalculates this and sets it incorrectly.

Fix it to just do nothing but unlock and put the page in this case.  We
don't actually need to mark the page dirty as nothing presumably
changed.

Fixes: 65dd2d6072d3 ("afs: Alter dirty range encoding in page->private")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: initialize ip_next_orphan

Though problem if found on a lower 4.1.12 kernel, I think upstream has
same issue.

In one node in the cluster, there is the following callback trace:

   # cat /proc/21473/stack
   __ocfs2_cluster_lock.isra.36+0x336/0x9e0 [ocfs2]
   ocfs2_inode_lock_full_nested+0x121/0x520 [ocfs2]
   ocfs2_evict_inode+0x152/0x820 [ocfs2]
   evict+0xae/0x1a0
   iput+0x1c6/0x230
   ocfs2_orphan_filldir+0x5d/0x100 [ocfs2]
   ocfs2_dir_foreach_blk+0x490/0x4f0 [ocfs2]
   ocfs2_dir_foreach+0x29/0x30 [ocfs2]
   ocfs2_recover_orphans+0x1b6/0x9a0 [ocfs2]
   ocfs2_complete_recovery+0x1de/0x5c0 [ocfs2]
   process_one_work+0x169/0x4a0
   worker_thread+0x5b/0x560
   kthread+0xcb/0xf0
   ret_from_fork+0x61/0x90

The above stack is not reasonable, the final iput shouldn't happen in
ocfs2_orphan_filldir() function.  Looking at the code,

  2067         /* Skip inodes which are already added to recover list, since dio may
  2068          * happen concurrently with unlink/rename */
  2069         if (OCFS2_I(iter)->ip_next_orphan) {
  2070                 iput(iter);
  2071                 return 0;
  2072         }
  2073

The logic thinks the inode is already in recover list on seeing
ip_next_orphan is non-NULL, so it skip this inode after dropping a
reference which incremented in ocfs2_iget().

While, if the inode is already in recover list, it should have another
reference and the iput() at line 2070 should not be the final iput
(dropping the last reference).  So I don't think the inode is really in
the recover list (no vmcore to confirm).

Note that ocfs2_queue_orphans(), though not shown up in the call back
trace, is holding cluster lock on the orphan directory when looking up
for unlinked inodes.  The on disk inode eviction could involve a lot of
IOs which may need long time to finish.  That means this node could hold
the cluster lock for very long time, that can lead to the lock requests
(from other nodes) to the orhpan directory hang for long time.

Looking at more on ip_next_orphan, I found it's not initialized when
allocating a new ocfs2_inode_info structure.

This causes te reflink operations from some nodes hang for very long
time waiting for the cluster lock on the orphan directory.

Fix: initialize ip_next_orphan as NULL.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201109171746.27884-1-wen.gang.wang@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: don't dump stack twice on warn

Before commit 3f388f28639f ("panic: dump registers on panic_on_warn"),
__warn() was calling show_regs() when regs was not NULL, and show_stack()
otherwise.

After that commit, show_stack() is called regardless of whether
show_regs() has been called or not, leading to duplicated Call Trace:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/nohash/8xx.c:186 mmu_mark_initmem_nx+0x24/0x94
  CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.0-rc2-s3k-dev-01375-gf46ec0d3ecbd-dirty #4092
  NIP:  c00128b4 LR: c0010228 CTR: 00000000
  REGS: c9023e40 TRAP: 0700   Not tainted  (5.10.0-rc2-s3k-dev-01375-gf46ec0d3ecbd-dirty)
  MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24000424  XER: 00000000

  GPR00: c0010228 c9023ef8 c2100000 0074c000 ffffffff 00000000 c2151000 c07b3880
  GPR08: ff000900 0074c000 c8000000 c33b53a8 24000822 00000000 c0003a20 00000000
  GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00800000
  NIP [c00128b4] mmu_mark_initmem_nx+0x24/0x94
  LR [c0010228] free_initmem+0x20/0x58
  Call Trace:
    free_initmem+0x20/0x58
    kernel_init+0x1c/0x114
    ret_from_kernel_thread+0x14/0x1c
  Instruction dump:
  7d291850 7d234b78 4e800020 9421ffe0 7c0802a6 bfc10018 3fe0c060 3bff0000
  3fff4080 3bffffff 90010024 57ff0010 <0fe00000> 392001cd 7c3e0b78 953e0008
  CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.0-rc2-s3k-dev-01375-gf46ec0d3ecbd-dirty #4092
  Call Trace:
    __warn+0x8c/0xd8 (unreliable)
    report_bug+0x11c/0x154
    program_check_exception+0x1dc/0x6e0
    ret_from_except_full+0x0/0x4
  --- interrupt: 700 at mmu_mark_initmem_nx+0x24/0x94
      LR = free_initmem+0x20/0x58
    free_initmem+0x20/0x58
    kernel_init+0x1c/0x114
    ret_from_kernel_thread+0x14/0x1c
  ---[ end trace 31702cd2a9570752 ]---

Only call show_stack() when regs is NULL.

Fixes: 3f388f28639f ("panic: dump registers on panic_on_warn")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lkml.kernel.org/r/e8c055458b080707f1bc1a98ff8bea79d0cec445.1604748361.git.christophe.leroy@csgroup.eu
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix anon huge page migration race

Qian Cai reported the following BUG in [1]

  LTP: starting move_pages12
  BUG: unable to handle page fault for address: ffffffffffffffe0
  ...
  RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63
  Call Trace:
    rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864
    try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763
    migrate_pages+0x1005/0x1fb0
    move_pages_and_store_status.isra.47+0xd7/0x1a0
    __x64_sys_move_pages+0xa5c/0x1100
    do_syscall_64+0x5f/0x310
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Hugh Dickins diagnosed this as a migration bug caused by code introduced
to use i_mmap_rwsem for pmd sharing synchronization.  Specifically, the
routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED
flag to try_to_unmap() while holding i_mmap_rwsem.  This is wrong for
anon pages as the anon_vma_lock should be held in this case.  Further
analysis suggested that i_mmap_rwsem was not required to he held at all
when calling try_to_unmap for anon pages as an anon page could never be
part of a shared pmd mapping.

Discussion also revealed that the hack in hugetlb_page_mapping_lock_write
to drop page lock and acquire i_mmap_rwsem is wrong.  There is no way to
keep mapping valid while dropping page lock.

This patch does the following:

 - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when
   calling try_to_unmap.

 - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine
   will now simply do a 'trylock' while still holding the page lock. If
   the trylock fails, it will return NULL. This could impact the
   callers:

    - migration calling code will receive -EAGAIN and retry up to the
      hard coded limit (10).

    - memory error code will treat the page as BUSY. This will force
      killing (SIGKILL) instead of SIGBUS any mapping tasks.

   Do note that this change in behavior only happens when there is a
   race. None of the standard kernel testing suites actually hit this
   race, but it is possible.

[1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/
[2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/

Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: fix missing wakeup polling thread

When we poll the swap.events, we can miss being woken up when the swap
event occurs.  Because we didn't notify.

Fixes: f3a53a3a1e5b ("mm, memcontrol: implement memory.swap.events")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20201105161936.98312-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/watchdog: fix watchdog_allowed_mask not used warning

Define watchdog_allowed_mask only when SOFTLOCKUP_DETECTOR is enabled.

Fixes: 7feeb9cd4f5b ("watchdog/sysctl: Clean up sysctl variable name space")
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20201106015025.1281561-1-santosh@fossix.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reboot: fix overflow parsing reboot cpu number

Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:

    BUG: unable to handle page fault for address: ffffffff90ab1bb0
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
      __do_sys_reboot.cold+0x34/0x5b
      do_syscall_64+0x2d/0x40

Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"

Patch series "fix parsing of reboot= cmdline", v3.

The parsing of the reboot= cmdline has two major errors:

 - a missing bound check can crash the system on reboot

 - parsing of the cpu number only works if specified last

Fix both.

This patch (of 2):

This reverts commit 616feab753972b97.

kstrtoint() and simple_strtoul() have a subtle difference which makes
them non interchangeable: if a non digit character is found amid the
parsing, the former will return an error, while the latter will just
stop parsing, e.g.  simple_strtoul("123xyx") = 123.

The kernel cmdline reboot= argument allows to specify the CPU used for
rebooting, with the syntax `s####` among the other flags, e.g.
"reboot=warm,s31,force", so if this flag is not the last given, it's
silently ignored as well as the subsequent ones.

Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

compiler.h: fix barrier_data() on clang

Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h
mutually exclusive") neglected to copy barrier_data() from
compiler-gcc.h into compiler-clang.h.

The definition in compiler-gcc.h was really to work around clang's more
aggressive optimization, so this broke barrier_data() on clang, and
consequently memzero_explicit() as well.

For example, this results in at least the memzero_explicit() call in
lib/crypto/sha256.c:sha256_transform() being optimized away by clang.

Fix this by moving the definition of barrier_data() into compiler.h.

Also move the gcc/clang definition of barrier() into compiler.h,
__memory_barrier() is icc-specific (and barrier() is already defined
using it in compiler-intel.h) and doesn't belong in compiler.h.

[rdunlap@infradead.org: fix ALPHA builds when SMP is not enabled]

Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org
Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>