Ryan Ding [Fri, 25 Mar 2016 21:21:01 +0000 (14:21 -0700)]
ocfs2: do not change i_size in write_end for direct io
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
Append direct io do not change i_size in get block phase. It only move
to orphan when starting write. After data is written to disk, it will
delete itself from orphan and update i_size. So skip i_size change
section in write_begin for direct io.
And when there is no extents alloc, no meta data changes needed for
direct io (since write_begin start trans for 2 reason: alloc extents &
change i_size. Now none of them needed). So we can skip start trans
procedure.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryan Ding [Fri, 25 Mar 2016 21:20:58 +0000 (14:20 -0700)]
ocfs2: test target page before change it
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
Direct io data will not appear in buffer. The w_target_page member will
not be filled by direct io. So avoid to use it when it's NULL. Unlinke
buffer io and mmap, direct io will call write_begin with more than 1
page a time. So the target_index is not sufficient to describe the
actual data. change it to a range start at target_index, end in
end_index.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryan Ding [Fri, 25 Mar 2016 21:20:55 +0000 (14:20 -0700)]
ocfs2: use c_new to indicate newly allocated extents
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
There is a problem in ocfs2's direct io implement: if system crashed
after extents allocated, and before data return, we will get a extent
with dirty data on disk. This problem violate the journal=order
semantics, which means meta changes take effect after data written to
disk. To resolve this issue, direct write can use the UNWRITTEN flag to
describe a extent during direct data writeback. The direct write
procedure should act in the following order:
phase 1: alloc extent with UNWRITTEN flag
phase 2: submit direct data to disk, add zero page to page cache
phase 3: clear UNWRITTEN flag when data has been written to disk
This patch is to change the 'c_unwritten' member of
ocfs2_write_cluster_desc to 'c_clear_unwritten'. Means whether to clear
the unwritten flag. It do not care if a extent is allocated or not.
And use 'c_new' to specify a newly allocated extent. So the direct io
procedure can use c_clear_unwritten to control the UNWRITTEN bit on
extent.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryan Ding [Fri, 25 Mar 2016 21:20:52 +0000 (14:20 -0700)]
ocfs2: add ocfs2_write_type_t type to identify the caller of write
Patchset: fix ocfs2 direct io code patch to support sparse file and data
ordering semantics
The idea is to use buffer io(more precisely use the interface
ocfs2_write_begin_nolock & ocfs2_write_end_nolock) to do the zero work
beyond block size. And clear UNWRITTEN flag until direct io data has
been written to disk, which can prevent data corruption when system
crashed during direct write.
And we will also archive a better performance: eg. dd direct write new
file with block size 4KB: before this patchset:
2.5 MB/s
after this patchset:
66.4 MB/s
This patch (of 8):
To support direct io in ocfs2_write_begin_nolock &
ocfs2_write_end_nolock.
Remove unused args filp & flags. Add new arg type. The type is one of
buffer/direct/mmap. Indicate 3 way to perform write. buffer/mmap type
has implemented. direct type will be implemented later.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Fri, 25 Mar 2016 21:20:50 +0000 (14:20 -0700)]
ocfs2: o2hb: fix double free bug
This is a regression issue and caused the following kernel panic when do
ocfs2 multiple test.
BUG: unable to handle kernel paging request at
00000002000800c0
IP: [<
ffffffff81192978>] kmem_cache_alloc+0x78/0x160
PGD
7bbe5067 PUD 0
Oops: 0000 [#1] SMP
Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront
CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-
20160225 #1
Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014
task:
ffff88007a521a80 ti:
ffff88007aed0000 task.ti:
ffff88007aed0000
RIP: 0010:[<
ffffffff81192978>] [<
ffffffff81192978>] kmem_cache_alloc+0x78/0x160
RSP: 0018:
ffff88007aed3a48 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000001991
RDX:
0000000000001990 RSI:
00000000024000c0 RDI:
000000000001b330
RBP:
ffff88007aed3a98 R08:
ffff88007d29b330 R09:
00000002000800c0
R10:
0000000c51376d87 R11:
ffff8800792cac38 R12:
ffff88007cc30f00
R13:
00000000024000c0 R14:
ffffffff811b053f R15:
ffff88007aed3ce7
FS:
0000000000000000(0000) GS:
ffff88007d280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000002000800c0 CR3:
000000007aeb2000 CR4:
00000000000406e0
Call Trace:
__d_alloc+0x2f/0x1a0
d_alloc+0x17/0x80
lookup_dcache+0x8a/0xc0
path_openat+0x3c3/0x1210
do_filp_open+0x80/0xe0
do_sys_open+0x110/0x200
SyS_open+0x19/0x20
do_syscall_64+0x72/0x230
entry_SYSCALL64_slow_path+0x25/0x25
Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63
RIP kmem_cache_alloc+0x78/0x160
CR2:
00000002000800c0
---[ end trace
823969e602e4aaac ]---
Fixes:
a4a1dfa4bb8b("ocfs2/cluster: fix memory leak in o2hb_region_release")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 25 Mar 2016 21:20:47 +0000 (14:20 -0700)]
drivers/input: eliminate INPUT_COMPAT_TEST macro
INPUT_COMPAT_TEST became much simpler after commit
f4056b52845283
("input: redefine INPUT_COMPAT_TEST as in_compat_syscall()") so we can
cleanly eliminate it altogether.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 25 Mar 2016 21:20:44 +0000 (14:20 -0700)]
oom, oom_reaper: protect oom_reaper_list using simpler way
"oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task" tried
to protect oom_reaper_list using MMF_OOM_KILLED flag. But we can do it
by simply checking tsk->oom_reaper_list != NULL.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 Mar 2016 21:20:41 +0000 (14:20 -0700)]
oom: make oom_reaper freezable
After "oom: clear TIF_MEMDIE after oom_reaper managed to unmap the
address space" oom_reaper will call exit_oom_victim on the target task
after it is done. This might however race with the PM freezer:
CPU0 CPU1 CPU2
freeze_processes
try_to_freeze_tasks
# Allocation request
out_of_memory
oom_killer_disable
wake_oom_reaper(P1)
__oom_reap_task
exit_oom_victim(P1)
wait_event(oom_victims==0)
[...]
do_exit(P1)
perform IO/interfere with the freezer
which breaks the oom_killer_disable semantic. We no longer have a
guarantee that the oom victim won't interfere with the freezer because
it might be anywhere on the way to do_exit while the freezer thinks the
task has already terminated. It might trigger IO or touch devices which
are frozen already.
In order to close this race, make the oom_reaper thread freezable. This
will work because
a) already running oom_reaper will block freezer to enter the
quiescent state
b) wake_oom_reaper will not wake up the reaper after it has been
frozen
c) the only way to call exit_oom_victim after try_to_freeze_tasks
is from the oom victim's context when we know the further
interference shouldn't be possible
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Fri, 25 Mar 2016 21:20:39 +0000 (14:20 -0700)]
oom: make oom_reaper_list single linked
Entries are only added/removed from oom_reaper_list at head so we can
use a single linked list and hence save a word in task_struct.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 Mar 2016 21:20:36 +0000 (14:20 -0700)]
oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task
Tetsuo has reported that oom_kill_allocating_task=1 will cause
oom_reaper_list corruption because oom_kill_process doesn't follow
standard OOM exclusion (aka ignores TIF_MEMDIE) and allows to enqueue
the same task multiple times - e.g. by sacrificing the same child
multiple times.
This patch fixes the issue by introducing a new MMF_OOM_KILLED mm flag
which is set in oom_kill_process atomically and oom reaper is disabled
if the flag was already set.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 Mar 2016 21:20:33 +0000 (14:20 -0700)]
mm, oom_reaper: implement OOM victims queuing
wake_oom_reaper has allowed only 1 oom victim to be queued. The main
reason for that was the simplicity as other solutions would require some
way of queuing. The current approach is racy and that was deemed
sufficient as the oom_reaper is considered a best effort approach to
help with oom handling when the OOM victim cannot terminate in a
reasonable time. The race could lead to missing an oom victim which can
get stuck
out_of_memory
wake_oom_reaper
cmpxchg // OK
oom_reaper
oom_reap_task
__oom_reap_task
oom_victim terminates
atomic_inc_not_zero // fail
out_of_memory
wake_oom_reaper
cmpxchg // fails
task_to_reap = NULL
This race requires 2 OOM invocations in a short time period which is not
very likely but certainly not impossible. E.g. the original victim
might have not released a lot of memory for some reason.
The situation would improve considerably if wake_oom_reaper used a more
robust queuing. This is what this patch implements. This means adding
oom_reaper_list list_head into task_struct (eat a hole before embeded
thread_struct for that purpose) and a oom_reaper_lock spinlock for
queuing synchronization. wake_oom_reaper will then add the task on the
queue and oom_reaper will dequeue it.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 Mar 2016 21:20:30 +0000 (14:20 -0700)]
mm, oom_reaper: report success/failure
Inform about the successful/failed oom_reaper attempts and dump all the
held locks to tell us more who is blocking the progress.
[akpm@linux-foundation.org: fix CONFIG_MMU=n build]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 Mar 2016 21:20:27 +0000 (14:20 -0700)]
oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space
When oom_reaper manages to unmap all the eligible vmas there shouldn't
be much of the freable memory held by the oom victim left anymore so it
makes sense to clear the TIF_MEMDIE flag for the victim and allow the
OOM killer to select another task.
The lack of TIF_MEMDIE also means that the victim cannot access memory
reserves anymore but that shouldn't be a problem because it would get
the access again if it needs to allocate and hits the OOM killer again
due to the fatal_signal_pending resp. PF_EXITING check. We can safely
hide the task from the OOM killer because it is clearly not a good
candidate anymore as everyhing reclaimable has been torn down already.
This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE
and thus hold off further global OOM killer actions granted the oom
reaper is able to take mmap_sem for the associated mm struct. This is
not guaranteed now but further steps should make sure that mmap_sem for
write should be blocked killable which will help to reduce such a lock
contention. This is not done by this patch.
Note that exit_oom_victim might be called on a remote task from
__oom_reap_task now so we have to check and clear the flag atomically
otherwise we might race and underflow oom_victims or wake up waiters too
early.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 Mar 2016 21:20:24 +0000 (14:20 -0700)]
mm, oom: introduce oom reaper
This patch (of 5):
This is based on the idea from Mel Gorman discussed during LSFMM 2015
and independently brought up by Oleg Nesterov.
The OOM killer currently allows to kill only a single task in a good
hope that the task will terminate in a reasonable time and frees up its
memory. Such a task (oom victim) will get an access to memory reserves
via mark_oom_victim to allow a forward progress should there be a need
for additional memory during exit path.
It has been shown (e.g. by Tetsuo Handa) that it is not that hard to
construct workloads which break the core assumption mentioned above and
the OOM victim might take unbounded amount of time to exit because it
might be blocked in the uninterruptible state waiting for an event (e.g.
lock) which is blocked by another task looping in the page allocator.
This patch reduces the probability of such a lockup by introducing a
specialized kernel thread (oom_reaper) which tries to reclaim additional
memory by preemptively reaping the anonymous or swapped out memory owned
by the oom victim under an assumption that such a memory won't be needed
when its owner is killed and kicked from the userspace anyway. There is
one notable exception to this, though, if the OOM victim was in the
process of coredumping the result would be incomplete. This is
considered a reasonable constrain because the overall system health is
more important than debugability of a particular application.
A kernel thread has been chosen because we need a reliable way of
invocation so workqueue context is not appropriate because all the
workers might be busy (e.g. allocating memory). Kswapd which sounds
like another good fit is not appropriate as well because it might get
blocked on locks during reclaim as well.
oom_reaper has to take mmap_sem on the target task for reading so the
solution is not 100% because the semaphore might be held or blocked for
write but the probability is reduced considerably wrt. basically any
lock blocking forward progress as described above. In order to prevent
from blocking on the lock without any forward progress we are using only
a trylock and retry 10 times with a short sleep in between. Users of
mmap_sem which need it for write should be carefully reviewed to use
_killable waiting as much as possible and reduce allocations requests
done with the lock held to absolute minimum to reduce the risk even
further.
The API between oom killer and oom reaper is quite trivial.
wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only
NULL->mm transition and oom_reaper clear this atomically once it is done
with the work. This means that only a single mm_struct can be reaped at
the time. As the operation is potentially disruptive we are trying to
limit it to the ncessary minimum and the reaper blocks any updates while
it operates on an mm. mm_struct is pinned by mm_count to allow parallel
exit_mmap and a race is detected by atomic_inc_not_zero(mm_users).
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Mel Gorman <mgorman@suse.de>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 25 Mar 2016 21:20:21 +0000 (14:20 -0700)]
sched: add schedule_timeout_idle()
This will be needed in the patch "mm, oom: introduce oom reaper".
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Mar 2016 16:02:13 +0000 (09:02 -0700)]
Revert "ppdev: use new parport device model"
This reverts commit
e7223f18603374d235d8bb0398532323e5f318b9.
It causes problems when a ppdev tries to register before the parport
driver has been registered with the device model. That will trigger the
BUG_ON(!drv->bus->p);
at drivers/base/driver.c:153. The call chain is
kernel_init ->
kernel_init_freeable ->
do_one_initcall ->
ppdev_init ->
__parport_register_driver ->
driver_register *BOOM*
Reported-by: kernel test robot <fengguang.wu@intel.com>
Reported-by: Ross Zwisler <zwisler@gmail.com>
Reported-by: Petr Mladek <pmladek@suse.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Mar 2016 15:52:25 +0000 (08:52 -0700)]
Merge tag 'firewire-update2' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire leftover from Stefan Richter:
"Occurrences of timeval were supposed to be eliminated last round, now
remove a last forgotten one"
* tag 'firewire-update2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: Replace timeval with timespec64
Linus Torvalds [Fri, 25 Mar 2016 15:48:31 +0000 (08:48 -0700)]
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just a couple of dma-buf related fixes and some amdgpu fixes, along
with a regression fix for radeon off but default feature, but makes my
30" monitor happy again"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/mst: cleanup code indentation
drm/radeon/mst: fix regression in lane/link handling.
drm/amdgpu: add invalidate_page callback for userptrs
drm/amdgpu: Revert "remove the userptr rmn->lock"
drm/amdgpu: clean up path handling for powerplay
drm/amd/powerplay: fix memory leak of tdp_table
dma-buf/fence: fix fence_is_later v2
dma-buf: Update docs for SYNC ioctl
drm: remove excess description
dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()
drm/atmel-hlcdc: use helper to get crtc state
drm/atomic: use helper to get crtc state
Linus Torvalds [Fri, 25 Mar 2016 06:13:48 +0000 (23:13 -0700)]
Merge tag 'asm-generic-4.6' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are only three patches this time, most other changes to files in
include/asm-generic tend to go through the tree of whoever depends on
the change.
Two patches are cleanups for stuff that is no longer needed, the main
change is to adapt the generic version of BUG_ON() for CONFIG_BUG=n to
make it behave consistently with BUG().
This avoids undefined behavior along with a number of warnings about
that undefined behavior in randconfig builds when we keep going on
after hitting a BUG_ON()"
* tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: remove old nonatomic-io wrapper files
asm-generic: default BUG_ON(x) to if(x)BUG()
asm-generic: page.h: Remove useless get_user_page and free_user_page
Dave Airlie [Fri, 25 Mar 2016 06:02:06 +0000 (16:02 +1000)]
Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux into drm-next
some amd fixes
* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/mst: cleanup code indentation
drm/radeon/mst: fix regression in lane/link handling.
drm/amdgpu: add invalidate_page callback for userptrs
drm/amdgpu: Revert "remove the userptr rmn->lock"
drm/amdgpu: clean up path handling for powerplay
drm/amd/powerplay: fix memory leak of tdp_table
Linus Torvalds [Fri, 25 Mar 2016 05:59:58 +0000 (22:59 -0700)]
Merge tag 'pm+acpi-4.6-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"The second batch of power management and ACPI updates for v4.6.
Included are fixups on top of the previous PM/ACPI pull request and
other material that didn't make into it but still should go into 4.6.
Among other things, there's a fix for an intel_pstate driver issue
uncovered by recent cpufreq changes, a workaround for a boot hang on
Skylake-H related to the handling of deep C-states by the platform and
a PCI/ACPI fix for the handling of IO port resources on non-x86
architectures plus some new device IDs and similar.
Specifics:
- Fix for an intel_pstate driver issue related to the handling of MSR
updates uncovered by the recent cpufreq rework (Rafael Wysocki).
- cpufreq core cleanups related to starting governors and frequency
synchronization during resume from system suspend and a locking fix
for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).
- acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
Michael Neuling, Richard Cochran, Shilpasri Bhat).
- intel_idle driver update preventing some Skylake-H systems from
hanging during initialization by disabling deep C-states mishandled
by the platform in the problematic configurations (Len Brown).
- Intel Xeon Phi Processor x200 support for intel_idle
(Dasaratharaman Chandramouli).
- cpuidle menu governor updates to make it always honor PM QoS
latency constraints (and prevent C1 from being used as the fallback
C-state on x86 when they are set below its exit latency) and to
restore the previous behavior to fall back to C1 if the next timer
event is set far enough in the future that was changed in 4.4 which
led to an energy consumption regression (Rik van Riel, Rafael
Wysocki).
- New device ID for a future AMD UART controller in the ACPI driver
for AMD SoCs (Wang Hongcheng).
- Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
scaling (AVS) driver (David Wu).
- ACPI PCI resources management fix for the handling of IO space
resources on architectures where the IO space is memory mapped
(IA64 and ARM64) broken by the introduction of common ACPI
resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).
- Fix for the ACPI backend of the generic device properties API to
make it parse non-device (data node only) children of an ACPI
device correctly (Irina Tirdea).
- Fixes for the handling of global suspend flags (introduced in 4.4)
during hibernation and resume from it (Lukas Wunner).
- Support for obtaining configuration information from Device Trees
in the PM clocks framework (Jon Hunter).
- ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
King, Geert Uytterhoeven)"
* tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM / AVS: rockchip-io: add io selectors and supplies for rk3399
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
ACPI / PM: Runtime resume devices when waking from hibernate
PM / sleep: Clear pm_suspend_global_flags upon hibernate
cpufreq: governor: Always schedule work on the CPU running update
cpufreq: Always update current frequency before startig governor
cpufreq: Introduce cpufreq_update_current_freq()
cpufreq: Introduce cpufreq_start_governor()
cpufreq: powernv: Add sysfs attributes to show throttle stats
cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
PCI: ACPI: IA64: fix IO port generic range check
ACPI / util: cast data to u64 before shifting to fix sign extension
cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
cpuidle: menu: Fall back to polling if next timer event is near
cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
cpufreq: Make cpufreq_quick_get() safe to call
ACPI / property: fix data node parsing in acpi_get_next_subnode()
ACPI / APD: Add device HID for future AMD UART controller
...
Linus Torvalds [Fri, 25 Mar 2016 05:49:08 +0000 (22:49 -0700)]
Merge tag 'rtc-4.6-2' of git://git./linux/kernel/git/abelloni/linux
Pull more RTC updates from Alexandre Belloni:
"A second pull request for v4.6 with a few fixesi before -rc1. The new
features for abx80x actually make the RTC behave correctly.
Drivers:
- abx80x: handle both XT and RC oscillators, XT failure bit and
autocalibration
- m41t80: avoid out of range year values
- rv8803: workaround an i2c HW issue"
* tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: handle the oscillator failure bit
rtc: abx80x: handle autocalibration
rtc: rv8803: workaround i2c HW issue
rtc: mcp795: add devicetree support
rtc: asm9260: remove incorrect __init/__exit annotations
rtc: m41t80: avoid out of range year values
rtc: s3c: Don't print an error on probe deferral
rtc: rv3029: stop mentioning rv3029c2
Linus Torvalds [Fri, 25 Mar 2016 05:45:32 +0000 (22:45 -0700)]
Merge tag 'hwmon-for-linus-v4.6-2' of git://git./linux/kernel/git/groeck/linux-staging
Pull more hwmon updates from Guenter Roeck:
"Update hwmon mailing list and web page"
* tag 'hwmon-for-linus-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
MAINTAINERS: Update mailing list and web page for hwmon subsystem
Linus Torvalds [Fri, 25 Mar 2016 03:00:44 +0000 (20:00 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Final round of fixes for this merge window - some of this has come up
after the initial pull request, and some of it was put in a post-merge
branch before the merge window.
This contains:
- Fix for a bad check for an error on dma mapping in the mtip32xx
driver, from Alexey Khoroshilov.
- A set of fixes for lightnvm, from Javier, Matias, and Wenwei.
- An NVMe completion record corruption fix from Marta, ensuring that
we read things in the right order.
- Two writeback fixes from Tejun, marked for stable@ as well.
- A blk-mq sw queue iterator fix from Thomas, fixing an oops for
sparse CPU maps. They hit this in the hot plug/unplug rework"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: avoid cqe corruption when update at the same time as read
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
blk-mq: Use proper cpumask iterator
mtip32xx: fix checks for dma mapping errors
lightnvm: do not load L2P table if not supported
lightnvm: do not reserve lun on l2p loading
nvme: lightnvm: return ppa completion status
lightnvm: add a bitmap of luns
lightnvm: specify target's logical address area
null_blk: add lightnvm null_blk device to the nullb_list
Linus Torvalds [Fri, 25 Mar 2016 02:57:15 +0000 (19:57 -0700)]
Merge tag 'for-linus-
20160324' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"NAND:
- Add sunxi_nand randomizer support
- begin refactoring NAND ecclayout structs
- fix pxa3xx_nand dmaengine usage
- brcmnand: fix support for v7.1 controller
- add Qualcomm NAND controller driver
SPI NOR:
- add new ls1021a, ls2080a support to Freescale QuadSPI
- add new flash ID entries
- support bottom-block protection for Winbond flash
- support Status Register Write Protect
- remove broken QPI support for Micron SPI flash
JFFS2:
- improve post-mount CRC scan efficiency
General:
- refactor bcm63xxpart parser, to later extend for NAND
- add writebuf size parameter to mtdram
Other minor code quality improvements"
* tag 'for-linus-
20160324' of git://git.infradead.org/linux-mtd: (72 commits)
mtd: nand: remove kerneldoc for removed function parameter
mtd: nand: Qualcomm NAND controller driver
dt/bindings: qcom_nandc: Add DT bindings
mtd: nand: don't select chip in nand_chip's block_bad op
mtd: spi-nor: support lock/unlock for a few Winbond chips
mtd: spi-nor: add TB (Top/Bottom) protect support
mtd: spi-nor: add SPI_NOR_HAS_LOCK flag
mtd: spi-nor: use BIT() for flash_info flags
mtd: spi-nor: disallow further writes to SR if WP# is low
mtd: spi-nor: make lock/unlock bounds checks more obvious and robust
mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region
mtd: spi-nor: wait for SR_WIP to clear on initial unlock
mtd: nand: simplify nand_bch_init() usage
mtd: mtdswap: remove useless if (!mtd->ecclayout) test
mtd: create an mtd_oobavail() helper and make use of it
mtd: kill the ecclayout->oobavail field
mtd: nand: check status before reporting timeout
mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'
mtd: mtdram: Add parameter for setting writebuf size
mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'
...
Linus Torvalds [Fri, 25 Mar 2016 02:55:41 +0000 (19:55 -0700)]
Merge tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
"This contains cleanups and a maintainer update for UBI and UBIFS"
* tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs:
ubifs: Remove unused header
MAINTAINERS: Update UBIFS entry
mtd: ubi: Add logging functions ubi_msg, ubi_warn and ubi_err
ubifs: Add logging functions for ubifs_msg, ubifs_err and ubifs_warn
Linus Torvalds [Fri, 25 Mar 2016 02:50:32 +0000 (19:50 -0700)]
Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux
Pull more nfsd updates from Bruce Fields:
"Apologies for the previous request, which omitted the top 8 commits
from my for-next branch (including the SCSI layout commits). Thanks
to Trond for spotting my error!"
This actually includes the new layout types, so here's that part of
the pull message repeated:
"Support for a new pnfs layout type from Christoph Hellwig. The new
layout type is a variant of the block layout which uses SCSI features
to offer improved fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission"
* tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux:
nfsd: use short read as well as i_size to set eof
nfsd: better layoutupdate bounds-checking
nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK
nfsd: add SCSI layout support
nfsd: move some blocklayout code
nfsd: add a new config option for the block layout driver
nfs/blocklayout: add SCSI layout support
nfs4.h: add SCSI layout definitions
Linus Torvalds [Fri, 25 Mar 2016 02:42:50 +0000 (19:42 -0700)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild
Pull kbuild misc updates from Michal Marek:
"The non-critical part of kbuild for v4.6-rc1:
- coccinelle cleanup and a new patch
- make tags rule for kprobe helpers
- make rpm fix to avoid spurious grub2 entries
- make rpm support for %postun script (Fedora only at the moment)"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild/mkspec: clean boot loader configuration on rpm removal
kbuild/mkspec: fix grub2 installkernel issue
Coccinelle: Add api/setup_timer.cocci
coccinelle: bugon: reduce rule applicability
Coccinelle: pm_runtime: reduce rule applicability
Coccinelle: array_size: reduce rule applicability
Coccinelle: reduce rule applicability
scripts/tags.sh: add regex to map kprobe helpers
scripts/coccinelle: modernize &
Linus Torvalds [Fri, 25 Mar 2016 02:39:28 +0000 (19:39 -0700)]
Merge branch 'kconfig' of git://git./linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
"Just two kconfig commits this time:
- kconfig Makefile fix for make 3.80
- Fix calculating symbols so that KCONFIG_ALLCONFIG=... does not
disable CONFIG_MODULES silently"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
unbreak allmodconfig KCONFIG_ALLCONFIG=...
scripts/kconfig: allow building with make 3.80 again
Linus Torvalds [Fri, 25 Mar 2016 02:26:47 +0000 (19:26 -0700)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
- make dtbs_install fix
- Error handling fix fixdep and link-vmlinux.sh
- __UNIQUE_ID fix for clang
- Fix for if_changed_* to suppress the "is up to date." message
- The kernel is built with -Werror=incompatible-pointer-types
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Add option to turn incompatible pointer check into error
kbuild: suppress annoying "... is up to date." message
kbuild: fixdep: Check fstat(2) return value
scripts/link-vmlinux.sh: force error on kallsyms failure
Kbuild: provide a __UNIQUE_ID for clang
dtbsinstall: don't move target directory out of the way
Linus Torvalds [Fri, 25 Mar 2016 02:16:20 +0000 (19:16 -0700)]
Merge branch 'parisc-4.6-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"This patchset adds stack usage debug info for parisc and metag (on
both the stack grows upwards), switches to the new generic realative
extable search and sort routines, drops the long time ago removed
syscalls alloc_hugepages and free_hugepages and wires up the new
preadv2 and pwritev2 syscalls"
* 'parisc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up preadv2 and pwritev2 syscalls
parisc: Use generic extable search and sort routines
parisc: Panic immediately when panic_on_oops
parisc,metag: Implement CONFIG_DEBUG_STACK_USAGE option
parisc: Drop alloc_hugepages and free_hugepages syscalls
Linus Torvalds [Fri, 25 Mar 2016 02:13:59 +0000 (19:13 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull second set of arm64 updates from Catalin Marinas:
- KASLR bug fixes: use callee-saved register, boot-time I-cache
maintenance
- inv_entry asm macro fix (EL0 check typo)
- pr_notice("Virtual kernel memory layout...") splitting
- Clean-ups: use p?d_set_huge consistently, allow preemption around
copy_to_user_page, remove unused __local_flush_icache_all()
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: allow preemption in copy_to_user_page
arm64: consistently use p?d_set_huge
arm64: kaslr: use callee saved register to preserve SCTLR across C call
arm64: Split pr_notice("Virtual kernel memory layout...") into multiple pr_cont()
arm64: drop unused __local_flush_icache_all()
arm64: fix KASLR boot-time I-cache maintenance
arm64/kernel: fix incorrect EL0 check in inv_entry macro
Linus Torvalds [Fri, 25 Mar 2016 02:01:38 +0000 (19:01 -0700)]
Merge tag 'armsoc-dt2' of git://git./linux/kernel/git/arm/arm-soc
Pull more ARM DT changes from Arnd Bergmann:
"Here are some final updates for ARM SoC specific dts files:
- The i.MX changes were sent relatively late, and had a dependency on
the clk tree, so I delayed that a bit. Support for the new i.MX6qp
SoC and a couple of new boards is added in this branch.
- Uniphier renames a few files to match the final product names that
were decided by the company, kudos to the kernel developer(s) for
getting support upstream before the product release. Also two
boards are added. The patches were posted early enough and nice
overall, but we forgot to apply them and decided to give it some
more time in linux-next
- at91 has two small bug fixes"
* tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
ARM: dts: uniphier: add pinmux node for I2C ch4
ARM: dts: uniphier: add @{address} to EEPROM node
ARM: dts: uniphier: add PH1-Pro4 Sanji board support
ARM: dts: uniphier: add PH1-Pro4 Ace board support
ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
ARM: dts: uniphier: add reference clock nodes
ARM: dts: uniphier: rework UniPhier System Bus nodes
ARM: dts: uniphier: factor out ranges property of support card
arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20
ARM: dts: imx53-qsb: Fix gpio button polarity
ARM: dts: vfxxx: Add DAC node for Vybrid SoC
ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
ARM: dts: imx: Add support for Advantech/GE B850v3
ARM: dts: imx: Add support for Advantech/GE B650v3
ARM: dts: imx: Add support for Advantech/GE B450v3
ARM: dts: imx: Add support for Advantech/GE Bx50v3
ARM: dts: imx: Add Advantech BA-16 Qseven module
...
Linus Torvalds [Fri, 25 Mar 2016 01:56:51 +0000 (18:56 -0700)]
Merge tag 'for-4.6' of git://git.osdn.jp/gitroot/uclinux-h8/linux
Pull h8300 updates from Yoshinori Sato:
"Various h8300 fixes"
* tag 'for-4.6' of git://git.osdn.jp/gitroot/uclinux-h8/linux:
h8300: switch EARLYCON
h8300: dts: Rename the serial port clock to fck
Mylène Josserand [Mon, 21 Mar 2016 17:06:10 +0000 (18:06 +0100)]
rtc: abx80x: handle the oscillator failure bit
Handle the Oscillator Failure ('OF') bit from Oscillator Status register
(0x1D). This bit is cleared on set_time function and is read each time the
date/time is read, but only in case of XT Oscillator selection.
In RC mode, this bit is always set.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Mylène Josserand [Mon, 21 Mar 2016 17:06:09 +0000 (18:06 +0100)]
rtc: abx80x: handle autocalibration
The autocalibration is separated in two bits to set in Oscillator
Control register (0x1c) :
- OSEL bit to select the oscillator type (XT or RC).
- ACAL bit to select the autocalibration type.
These functionnalities are exported in sysfs entries : "oscillator"
and "autocalibration". Respectively, the values are "xtal" for XT
oscillator and "rc" for RC oscillator and 0 to disable the
autocalibration cycle, 512 for a 512 seconds autocalibration cycle
and 1024 for a cycle of 1024 seconds.
Examples :
Set to XT Oscillator
echo xtal > /sys/class/rtc/rtc0/device/oscillator
Activate an autocalibration every 512 seconds
echo 512 > /sys/class/rtc/rtc0/device/autocalibration
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Alexandre Belloni [Mon, 21 Mar 2016 14:58:38 +0000 (15:58 +0100)]
rtc: rv8803: workaround i2c HW issue
The rv8803 has a 60µs window where it will not answer on the i2c bus.
It also means there will be no ack for the communication. Make sure
communication is tried multiple times when this happens (the i2c subsystem
mandates -ENXIO is that case but the number of retries is host specific).
The critical parts are the probe function and the alarm callback so make
sure we handle the failure there.
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Rafael J. Wysocki [Thu, 24 Mar 2016 23:59:41 +0000 (00:59 +0100)]
Merge branches 'acpi-soc', 'acpi-misc', 'acpi-pci' and 'device-properties'
* acpi-soc:
ACPI / APD: Add device HID for future AMD UART controller
* acpi-misc:
ACPI / util: cast data to u64 before shifting to fix sign extension
* acpi-pci:
PCI: ACPI: IA64: fix IO port generic range check
* device-properties:
ACPI / property: fix data node parsing in acpi_get_next_subnode()
Rafael J. Wysocki [Thu, 24 Mar 2016 23:58:18 +0000 (00:58 +0100)]
Merge branches 'pm-avs', 'pm-clk', 'pm-devfreq' and 'pm-sleep'
* pm-avs:
PM / AVS: rockchip-io: add io selectors and supplies for rk3399
* pm-clk:
PM / clk: Add support for obtaining clocks from device-tree
* pm-devfreq:
PM / devfreq: Spelling s/frequnecy/frequency/
* pm-sleep:
ACPI / PM: Runtime resume devices when waking from hibernate
PM / sleep: Clear pm_suspend_global_flags upon hibernate
Rafael J. Wysocki [Thu, 24 Mar 2016 23:57:22 +0000 (00:57 +0100)]
Merge branches 'pm-cpufreq' and 'pm-cpuidle'
* pm-cpufreq:
cpufreq: governor: Always schedule work on the CPU running update
cpufreq: Always update current frequency before startig governor
cpufreq: Introduce cpufreq_update_current_freq()
cpufreq: Introduce cpufreq_start_governor()
cpufreq: powernv: Add sysfs attributes to show throttle stats
cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
cpufreq: Make cpufreq_quick_get() safe to call
* pm-cpuidle:
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
cpuidle: menu: Fall back to polling if next timer event is near
cpuidle: menu: use high confidence factors only when considering polling
Guenter Roeck [Tue, 22 Mar 2016 22:11:03 +0000 (15:11 -0700)]
MAINTAINERS: Update mailing list and web page for hwmon subsystem
The old web page for the hwmon subsystem is no longer operational,
and the mailing list has become unreliable. Move both to kernel.org.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Thu, 24 Mar 2016 17:52:25 +0000 (10:52 -0700)]
Merge tag 'trace-v4.6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Nothing major this round. Mostly small clean ups and fixes.
Some visible changes:
- A new flag was added to distinguish traces done in NMI context.
- Preempt tracer now shows functions where preemption is disabled but
interrupts are still enabled.
Other notes:
- Updates were done to function tracing to allow better performance
with perf.
- Infrastructure code has been added to allow for a new histogram
feature for recording live trace event histograms that can be
configured by simple user commands. The feature itself was just
finished, but needs a round in linux-next before being pulled.
This only includes some infrastructure changes that will be needed"
* tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (22 commits)
tracing: Record and show NMI state
tracing: Fix trace_printk() to print when not using bprintk()
tracing: Remove redundant reset per-CPU buff in irqsoff tracer
x86: ftrace: Fix the misleading comment for arch/x86/kernel/ftrace.c
tracing: Fix crash from reading trace_pipe with sendfile
tracing: Have preempt(irqs)off trace preempt disabled functions
tracing: Fix return while holding a lock in register_tracer()
ftrace: Use kasprintf() in ftrace_profile_tracefs()
ftrace: Update dynamic ftrace calls only if necessary
ftrace: Make ftrace_hash_rec_enable return update bool
tracing: Fix typoes in code comment and printk in trace_nop.c
tracing, writeback: Replace cgroup path to cgroup ino
tracing: Use flags instead of bool in trigger structure
tracing: Add an unreg_all() callback to trigger commands
tracing: Add needs_rec flag to event triggers
tracing: Add a per-event-trigger 'paused' field
tracing: Add get_syscall_name()
tracing: Add event record param to trigger_ops.func()
tracing: Make event trigger functions available
tracing: Make ftrace_event_field checking functions available
...
Linus Torvalds [Thu, 24 Mar 2016 17:45:59 +0000 (10:45 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:
- Fix a regression where bogus trip points on some Lenovo laptops start
to screw up thermal control after commit
81ad4276b505 ("Thermal:
initialize thermal zone device correctly").
On these Lenovo laptops, a bogus passive trip point is reported,
which is 0 degree Celsius. Without commit
81ad4276b505, thermal zone
fails to set cooling devices to proper cooling state, which is a bug.
But with commit
81ad4276b505 applied, the processors are always
throttled on these Lenovo laptops because the current temperature is
always higher than the passive trip point.
Fix things to ignore such bogus trip points. (Zhang Rui)
- Introduce Mediatek thermal driver. (Sascha Hauer)
- Introduce devm_ versions of OF thermal sensor register API. (Laxman
Dewangan)
- Changes in Kconfigs to allow compile test on UM arch. (Krzysztof
Kozlowski)
- Introduce Skylake support in intel_pch_thermal driver. (Srinivas
Pandruvada)
- Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos
thermal drivers.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits)
Thermal: Ignore invalid trip points
thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros
thermal: intel_pch_thermal: Enable Skylake PCH thermal
thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister}
thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register
thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister}
thermal: exynos: Defer probe if vtmu is present but not registered
thermal: exynos: Use devm_regulator_get_optional() for vtmu
thermal: exynos: List vtmu-supply as optional property in DT binding
thermal: exynos: Print a message about exceeded number of supported trip-points
thermal: exynos: Document number of supported trip-points
thermal: exynos: Document compatible for Exynos5433 TMU
thermal: mtk: allow compile testing on UM
thermal: tegra_soctherm: fix sign bit of temperature
thermal: Fix build error of missing devm_ioremap_resource on UM
thermal: ti-soc-thermal: clean up the error handling a bit
thermal: rcar: Use ARCH_RENESAS
thermal: rcar_thermal: don't open code of_device_get_match_data()
thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST
thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399
...
Linus Torvalds [Thu, 24 Mar 2016 17:41:00 +0000 (10:41 -0700)]
Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Various bugfixes, a RDMA update from Chuck Lever, and support for a
new pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)"
* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
nfsd: recover: fix memory leak
nfsd: fix deadlock secinfo+readdir compound
nfsd4: resfh unused in nfsd4_secinfo
svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
svcrdma: Remove close_out exit path
svcrdma: Hook up the logic to return ERR_CHUNK
svcrdma: Use correct XID in error replies
svcrdma: Make RDMA_ERROR messages work
rpcrdma: Add RPCRDMA_HDRLEN_ERR
svcrdma: svc_rdma_post_recv() should close connection on error
svcrdma: Close connection when a send error occurs
nfsd: Lower NFSv4.1 callback message size limit
svcrdma: Do not send Write chunk XDR pad with inline content
svcrdma: Do not write xdr_buf::tail in a Write chunk
svcrdma: Find client-provided write and reply chunks once per reply
nfsd: Update NFS server comments related to RDMA support
nfsd: Fix a memory leak when meeting unsupported state_protect_how4
nfsd4: fix bad bounds checking
Linus Torvalds [Thu, 24 Mar 2016 17:36:16 +0000 (10:36 -0700)]
Merge tag 'staging-4.6-rc1' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some fixes that poped up due to the big staging tree merge,
as well as the removal of a staging driver that now is covered by a
"real" driver.
All of these have been in linux-next for a few days with no reported
issues"
* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: delete STE RMI4 hackish driver
staging: android: ion_test: fix check of platform_device_register_simple() error code
staging: wilc1000: fix a couple of memory leaks
staging: fsl-mc: fix incorrect type passed to dev_err macros
staging: fsl-mc: fix incorrect type passed to dev_dbg macros
staging: wilc1000: fixed kernel panic when firmware is not started
staging: comedi: ni_mio_common: fix the ni_write[blw]() functions
staging: most: hdm-dim2: Remove possible dereference error
staging: lustre: checking for NULL instead of IS_ERR
staging: lustre: really make lustre dependent on LNet
staging: refresh TODO for rtl8712
staging: refresh TODO for rtl8723au
Linus Torvalds [Thu, 24 Mar 2016 17:32:42 +0000 (10:32 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix to the pistachio clocksource driver using the proper
signedness in the error print format"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/pistachio: Correct output format of PTR_ERR()
Linus Torvalds [Thu, 24 Mar 2016 17:29:44 +0000 (10:29 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A small set of fixes for the usual ARM/SOC irqchip drivers
- A set of fixes for mbigen to handle multiple devices in a hardware
module proper
- A cleanup for the mbigen config option which was pointlessly user
configurable.
- A cleanup for tegra replacing open coded functionality by the
proper core function
The config cleanup touches arch/arm64/Kconfig.platforms to select the
irq chip for the related platform"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option
ARM64: Kconfig: Select mbigen interrupt controller on Hisilicon platform
irqchip/mbigen: Handle multiple device nodes in a mbigen module
irqchip/mbigen: Adjust DT bindings to handle multiple devices in a module
irqchip/tegra: Switch to use irq_domain_free_irqs_common
Linus Torvalds [Thu, 24 Mar 2016 17:02:14 +0000 (10:02 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This tree contains various perf fixes on the kernel side, plus three
hw/event-enablement late additions:
- Intel Memory Bandwidth Monitoring events and handling
- the AMD Accumulated Power Mechanism reporting facility
- more IOMMU events
... and a final round of perf tooling updates/fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf llvm: Use strerror_r instead of the thread unsafe strerror one
perf llvm: Use realpath to canonicalize paths
perf tools: Unexport some methods unused outside strbuf.c
perf probe: No need to use formatting strbuf method
perf help: Use asprintf instead of adhoc equivalents
perf tools: Remove unused perf_pathdup, xstrdup functions
perf tools: Do not include stringify.h from the kernel sources
tools include: Copy linux/stringify.h from the kernel
tools lib traceevent: Remove redundant CPU output
perf tools: Remove needless 'extern' from function prototypes
perf tools: Simplify die() mechanism
perf tools: Remove unused DIE_IF macro
perf script: Remove lots of unused arguments
perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve
perf machine: Rename perf_event__preprocess_sample to machine__resolve
perf tools: Add cpumode to struct perf_sample
perf tests: Forward the perf_sample in the dwarf unwind test
perf tools: Remove misplaced __maybe_unused
perf list: Fix documentation of :ppp
perf bench numa: Fix assertion for nodes bitfield
...
Arnd Bergmann [Thu, 24 Mar 2016 16:50:24 +0000 (17:50 +0100)]
Merge tag 'at91-fixes' of git://git./linux/kernel/git/nferre/linux-at91 into next/dt2
Merge "First fixes batch for AT91 on 4.6 - DT only fixes" from Nicolas Ferre:
- prevent the boards from having glitches when inserting/removing SD card on
sama5d3/d4 Xplained. The regulators should be kept on.
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d2 Xplained: add leds node
ARM: dts: at91: sama5d2 Xplained: add user push button
ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
ARM: dts: at91: sama5d2: add dma properties to UART nodes
ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
Linus Torvalds [Thu, 24 Mar 2016 16:47:32 +0000 (09:47 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- fix hotplug bugs
- fix irq live lock
- fix various topology handling bugs
- fix APIC ACK ordering
- fix PV iopl handling
- fix speling
- fix/tweak memcpy_mcsafe() return value
- fix fbcon bug
- remove stray prototypes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msr: Remove unused native_read_tscp()
x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck
x86/oprofile/nmi: Add missing hotplug FROZEN handling
x86/hpet: Use proper mask to modify hotplug action
x86/apic/uv: Fix the hotplug notifier
x86/apb/timer: Use proper mask to modify hotplug action
x86/topology: Use total_cpus not nr_cpu_ids for logical packages
x86/topology: Fix Intel HT disable
x86/topology: Fix logical package mapping
x86/irq: Cure live lock in fixup_irqs()
x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known()
x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt()
x86/iopl: Fix iopl capability check on Xen PV
x86/iopl/64: Properly context-switch IOPL on Xen PV
selftests/x86: Add an iopl test
x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe()
x86/video: Don't assume all FB devices are PCI devices
arch/x86/irq: Purge useless handler declarations from hw_irq.h
x86: Fix misspellings in comments
Yoshinori Sato [Sat, 21 Nov 2015 12:42:58 +0000 (21:42 +0900)]
h8300: switch EARLYCON
earlyprintk is architecture specific option.
earlycon is generic and small footprint.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Geert Uytterhoeven [Fri, 29 Jan 2016 09:36:25 +0000 (10:36 +0100)]
h8300: dts: Rename the serial port clock to fck
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Linus Torvalds [Thu, 24 Mar 2016 16:42:50 +0000 (09:42 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a cgroup fix, a fair-scheduler migration accounting fix, a
cputime fix and two cpuacct cleanups"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cpuacct: Simplify the cpuacct code
sched/cpuacct: Rename parameter in cpuusage_write() for readability
sched/fair: Add comments to explain select_idle_sibling()
sched/fair: Fix fairness issue on migration
sched/cgroup: Fix/cleanup cgroup teardown/init
sched/cputime: Fix steal time accounting vs. CPU hotplug
Linus Torvalds [Thu, 24 Mar 2016 16:36:18 +0000 (09:36 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Documentation updates and a bitops ordering fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bitops: Do not default to __clear_bit() for __clear_bit_unlock()
documentation: Clarify compiler store-fusion example
documentation: Transitivity is not cumulativity
documentation: Add alternative release-acquire outcome
documentation: Distinguish between local and global transitivity
documentation: Subsequent writes ordered by rcu_dereference()
documentation: Remove obsolete reference to RCU-protected indexes
documentation: Fix memory-barriers.txt section references
documentation: Fix control dependency and identical stores
Mark Rutland [Tue, 22 Mar 2016 10:11:28 +0000 (10:11 +0000)]
arm64: mm: allow preemption in copy_to_user_page
Currently we disable preemption in copy_to_user_page; a behaviour that
we inherited from the 32-bit arm code. This was necessary for older
cores without broadcast data cache maintenance, and ensured that cache
lines were dirtied and cleaned by the same CPU. On these systems dirty
cache line migration was not possible, so this was sufficient to
guarantee coherency.
On contemporary systems, cache coherence protocols permit (dirty) cache
lines to migrate between CPUs as a result of speculation, prefetching,
and other behaviours. To account for this, in ARMv8 data cache
maintenance operations are broadcast and affect all data caches in the
domain associated with the VA (i.e. ISH for kernel and user mappings).
In __switch_to we ensure that tasks can be safely migrated in the middle
of a maintenance sequence, using a dsb(ish) to ensure prior explicit
memory accesses are observed and cache maintenance operations are
completed before a task can be run on another CPU.
Given the above, it is not necessary to disable preemption in
copy_to_user_page. This patch removes the preempt_{disable,enable}
calls, permitting preemption.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 22 Mar 2016 10:11:45 +0000 (10:11 +0000)]
arm64: consistently use p?d_set_huge
Commit
324420bf91f60582 ("arm64: add support for ioremap() block
mappings") added new p?d_set_huge functions which do the hard work to
generate and set a correct block entry.
These differ from open-coded huge page creation in the early page table
code by explicitly setting the P?D_TYPE_SECT bits (which are implicitly
retained by mk_sect_prot() for any valid prot), but are otherwise
identical (and cannot fail on arm64).
For simplicity and consistency, make use of these in the initial page
table creation code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ard Biesheuvel [Mon, 21 Mar 2016 17:35:11 +0000 (18:35 +0100)]
arm64: kaslr: use callee saved register to preserve SCTLR across C call
The KASLR code incorrectly expects the contents of x18 to be preserved
across a call into C code, and uses it to stash the contents of SCTLR_EL1
before enabling the MMU. If the MMU needs to be disabled again to create
the randomized kernel mapping, x18 is written back to SCTLR_EL1, which is
likely to crash the system if x18 has been clobbered by kasan_early_init()
or kaslr_early_init(). So use x22 instead, which is not in use so far in
head.S
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Rafael J. Wysocki [Thu, 24 Mar 2016 12:52:09 +0000 (13:52 +0100)]
Merge branch 'cpuidle' of git://git./linux/kernel/git/lenb/linux into pm-cpuidle
Pull intel_idle patches for 4.6 from Len Brown.
* 'cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
Ingo Molnar [Thu, 24 Mar 2016 07:30:25 +0000 (08:30 +0100)]
Merge tag 'perf-core-for-mingo-
20160323' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes:
User visible fixes:
- Fix documentation of :ppp modifier in 'perf list' (Andi Kleen)
- Fix silly nodes bitfield bits/bytes length assertion in 'perf bench numa' (Jakub Jelen)
- Remove redundant CPU output in libtraceevent (Steven Rostedt)
- Remove 'core_id' check in topology 'perf test' (Sukadev Bhattiprolu)
Infrastructure changes/fixes:
- Record text offset in dso to calculate objdump address, to use with
modules in addition to vDSO symbol address calculations (Wang Nan)
- Move utilities.mak from perf to tools/scripts/ (Arnaldo Carvalho de Melo)
- Add cpumode to the perf_sample struct, this way we don't need to pass
the union event to the machine and thread resolving routines, shortening
function signatures and allowing the future introduction of a way
to use tracepoint events instead of the unavailable HW cycles counter on
powerpc guests in perf kvm by just hooking on perf_evsel__parse_sample,
at the end (Arnaldo Carvalho de Melo)
- Remove/unexport die() related infrastructure, that at some point will
finally be removed (Arnaldo Carvalho de Melo)
- Adopt linux/stringify.h from the kernel sources, not to touch this
kernel header from tools/ (Arnaldo Carvalho de Melo)
- Stop using strbuf for things we can instead trivially use libc's asprintf()
(Arnaldo Carvalho de Melo)
- Ditch tools/lib/util/abspath.c, its only exported function was used at just
one place and can be replaced by libc's realpath() (Arnaldo Carvalho de Melo)
- Use strerror_r() in the llvm infrastructure, tread safe, its what is used
elsewhere in tools/perf/ (Arnaldo Carvalho de Melo)
Cleanups:
- Removed misplaced or needless __maybe_unused/export (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 24 Mar 2016 06:25:14 +0000 (23:25 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking bugfixes from David Miller:
"Several bug fixes rolling in, some for changes introduced in this
merge window, and some for problems that have existed for some time:
1) Fix prepare_to_wait() handling in AF_VSOCK, from Claudio Imbrenda.
2) The new DST_CACHE should be a silent config option, from Dave
Jones.
3) inet_current_timestamp() unintentionally truncates timestamps to
16-bit, from Deepa Dinamani.
4) Missing reference to netns in ppp, from Guillaume Nault.
5) Free memory reference in hv_netvsc driver, from Haiyang Zhang.
6) Missing kernel doc documentation for function arguments in various
spots around the networking, from Luis de Bethencourt.
7) UDP stopped receiving broadcast packets properly, due to
overzealous multicast checks, fix from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
net: ping: make ping_v6_sendmsg static
hv_netvsc: Fix the order of num_sc_offered decrement
net: Fix typos and whitespace.
hv_netvsc: Fix the array sizes to be max supported channels
hv_netvsc: Fix accessing freed memory in netvsc_change_mtu()
ppp: take reference on channels netns
net: Reset encap_level to avoid resetting features on inner IP headers
net: mediatek: fix checking for NULL instead of IS_ERR() in .probe
net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
at803x: fix reset handling
AF_VSOCK: Shrink the area influenced by prepare_to_wait
Revert "vsock: Fix blocking ops call in prepare_to_wait"
macb: fix PHY reset
ipv4: initialize flowi4_flags before calling fib_lookup()
fsl/fman: Workaround for Errata A-007273
ipv4: fix broadcast packets reception
net: hns: bug fix about the overflow of mss
net: hns: adds limitation for debug port mtu
net: hns: fix the bug about mtu setting
net: hns: fixes a bug of RSS
...
Haishuang Yan [Wed, 23 Mar 2016 09:59:51 +0000 (17:59 +0800)]
net: ping: make ping_v6_sendmsg static
As ping_v6_sendmsg is used only in this file,
making it static
The body of "pingv6_prot" and "pingv6_protosw" were
moved at the middle of the file, to avoid having to
declare some static prototypes.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Wed, 23 Mar 2016 21:54:48 +0000 (14:54 -0700)]
hv_netvsc: Fix the order of num_sc_offered decrement
Reorder the code in netvsc_sc_open(), so num_sc_offered is only decremented
after vmbus_open() is called. This avoid pontential race of removing device
before all channels are setup.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 24 Mar 2016 00:20:59 +0000 (17:20 -0700)]
Merge tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Significant refactoring of Dell laptop drivers, modularizing the
smbios code. Multiple new platforms added for ideapad, asus, dell,
and alienware using existing quirks. A few fixes and cleanups.
hp-wmi:
- Remove GPS rfkill support via pre-2009 interface
- fix unregister order in hp_wmi_rfkill_setup() once again
ideapad-laptop:
- Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop:
- Support radio toggle button
intel-hid:
- allocate correct amount of memory for private struct
platform/x86:
- Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc:
- Avoid pending IPC1 command during legacy suspend
- Fix GCR register base address and length
asus-nb-wmi:
- add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv:
- Change verbosity control bits
dell-rbtn:
- Add a comment about the XPS 13 9350
dell-wmi, dell-laptop:
- depends DMI
dell-wmi:
- support Dell Inspiron M5110
- properly process Dell Instant Launch hotkey
- enable receiving WMI events on Dell Vostro V131
- Support new hotkeys on the XPS 13 9350 (Skylake)
- Clean up hotkey table size check
- Stop storing pointers to DMI tables
dell-laptop:
- move dell_smi_error() to dell-smbios
- use dell_smbios_find_token() instead of find_token_location()
- use dell_smbios_find_token() instead of find_token_id()
- extract SMBIOS-related code to a separate module
dell-smbios:
- rename dell_smi_error() to dell_smbios_error()
- make da_tokens static
- remove find_token_{id,location}()
- implement new function for finding DMI table 0xDA tokens
- make the SMBIOS buffer static
- return the SMBIOS buffer from dell_smbios_get_buffer()
- don't return an SMBIOS buffer from dell_smbios_send_request()
- don't pass an SMBIOS buffer to dell_smbios_send_request()
- rename dell_send_request() to dell_smbios_send_request()
- rename release_buffer() to dell_smbios_release_buffer()
- rename clear_buffer() to dell_smbios_clear_buffer()
- rename get_buffer() to dell_smbios_get_buffer()
dell-led:
- use dell_smbios_send_request() for performing SMBIOS calls
- use dell_smbios_find_token() for finding mic DMI tokens
toshiba_acpi:
- Add a module parameter to disable hotkeys registration
- Add sysfs entries for the Cooling Method feature
- Add support for cooling method feature
Documentation/ABI:
- Update sysfs-driver-toshiba_acpi file
thinkpad_acpi:
- Remove ambiguous logging for "Unsupported brightness interface"
alienware-wmi:
- whitespace improvements
- Add support for two new systems: ASM200 and ASM201.
- Add support for deep sleep control.
- Add initial support for alienware graphics amplifier.
- Add support for new platform: X51-R3
- Clean up whitespace for ASM100 platform"
* tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits)
hp-wmi: Remove GPS rfkill support via pre-2009 interface
hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
dell-wmi: support Dell Inspiron M5110
dell-wmi: properly process Dell Instant Launch hotkey
dell-wmi: enable receiving WMI events on Dell Vostro V131
dell-smbios: rename dell_smi_error() to dell_smbios_error()
dell-laptop: move dell_smi_error() to dell-smbios
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop: Support radio toggle button
intel-hid: allocate correct amount of memory for private struct
platform/x86: Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
intel_pmc_ipc: Fix GCR register base address and length
asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv: Change verbosity control bits
dell-rbtn: Add a comment about the XPS 13 9350
dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
dell-wmi: Clean up hotkey table size check
dell-wmi, dell-laptop: depends DMI
dell-wmi: Stop storing pointers to DMI tables
...
Linus Torvalds [Thu, 24 Mar 2016 00:14:09 +0000 (17:14 -0700)]
Merge tag 'pwm/for-4.6-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"No new drivers this time around, but a handful of cleanups and fixes"
* tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: omap-dmtimer: Add debug message for effective period and duty cycle
pwm: omap-dmtimer: Round load and match values rather than truncate
pwm: omap-dmtimer: Add sanity checking for load and match values
pwm: omap-dmtimer: Fix inaccurate period and duty cycle calculations
pwm: brcmstb: Fix check of devm_ioremap_resource() return code
pwm: rcar: Depend on ARCH_RENESAS instead of ARCH_SHMOBILE
pwm: lpc18xx-sct: Test clock rate to avoid division by 0
pwm: img: Test clock rate to avoid division by 0
Linus Torvalds [Wed, 23 Mar 2016 22:57:39 +0000 (15:57 -0700)]
Merge branch 'for-next-merge' of git://git./linux/kernel/git/nab/target-pending
Pull more SCSI target updates from Nicholas Bellinger:
"This series contains cxgb4 driver prerequisites for supporting iscsi
segmentation offload (ISO), that will be utilized for a number of
future v4.7 developments in iscsi-target for supporting generic hw
offloads"
* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
cxgb4: update Kconfig and Makefile
cxgb4: add iSCSI DDP page pod manager
cxgb4, iw_cxgb4: move delayed ack macro definitions
cxgb4: move VLAN_NONE macro definition
cxgb4: update struct cxgb4_lld_info definition
cxgb4: add definitions for iSCSI target ULD
cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition
cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions
cxgb4, iw_cxgb4: move definitions to common header file
cxgb4: large receive offload support
cxgb4: allocate resources for CXGB4_ULD_ISCSIT
cxgb4: add new ULD type CXGB4_ULD_ISCSIT
Dave Airlie [Wed, 23 Mar 2016 22:41:59 +0000 (08:41 +1000)]
Merge tag 'topic/drm-misc-2016-03-22' of git://anongit.freedesktop.org/drm-intel into drm-next
Bunch of small fixupes all over. Plus a dma-buf patch that Sumit asked me
to cherry-pick since that's the only one he had in his tree.
There's a sparse issue outstanding in the color mgr stuff, but Lionel is
still working on something that actually appeases sparse.
* tag 'topic/drm-misc-2016-03-22' of git://anongit.freedesktop.org/drm-intel:
dma-buf/fence: fix fence_is_later v2
dma-buf: Update docs for SYNC ioctl
drm: remove excess description
dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()
drm/atmel-hlcdc: use helper to get crtc state
drm/atomic: use helper to get crtc state
David Wu [Tue, 15 Mar 2016 18:45:26 +0000 (02:45 +0800)]
PM / AVS: rockchip-io: add io selectors and supplies for rk3399
This adds the necessary data for handling io voltage domains on the rk3399.
As interesting tidbit, the rk3399 contains two separate iodomain areas.
One in the regular General Register Files (GRF) and one in PMUGRF in the
pmu power domain.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 20:42:21 +0000 (17:42 -0300)]
perf llvm: Use strerror_r instead of the thread unsafe strerror one
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5njrq9dltckgm624omw9ljgu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 20:34:29 +0000 (17:34 -0300)]
perf llvm: Use realpath to canonicalize paths
To kill the last user of make_nonrelative_path(), that gets ditched,
one more panicking function killed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3hu56rvyh4q5gxogovb6ko8a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dasaratharaman Chandramouli [Fri, 5 Sep 2014 00:22:54 +0000 (17:22 -0700)]
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Enables "Intel(R) Xeon Phi(TM) Processor x200 Product Family" support,
formerly code-named KNL. It is based on modified Intel Atom Silvermont
microarchitecture.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
[micah.barany@intel.com: adjusted values of residency and latency]
Signed-off-by: Micah Barany <micah.barany@intel.com>
[hubert.chrzaniuk@intel.com: removed deprecated CPUIDLE_FLAG_TIME_VALID flag]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Pawel Karczewski <pawel.karczewski@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sun, 13 Mar 2016 05:33:48 +0000 (00:33 -0500)]
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
Some SKL-H configurations require "intel_idle.max_cstate=7" to boot.
While that is an effective workaround, it disables C10.
This patch detects the problematic configuration,
and disables C8 and C9, keeping C10 enabled.
Note that enabling SGX in BIOS SETUP can also prevent this issue,
if the system BIOS provides that option.
https://bugzilla.kernel.org/show_bug.cgi?id=109081
"Freezes with Intel i7 6700HQ (Skylake), unless intel_idle.max_cstate=7"
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 19:56:56 +0000 (16:56 -0300)]
perf tools: Unexport some methods unused outside strbuf.c
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nq1wvtky4mpu0nupjyar7sbw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Benjamin Coddington [Tue, 22 Mar 2016 14:28:36 +0000 (10:28 -0400)]
nfsd: use short read as well as i_size to set eof
Use the result of a local read to determine when to set the eof flag. This
allows us to return the location of the end of the file atomically at the
time of the read.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields: add some documentation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 19:44:49 +0000 (16:44 -0300)]
perf probe: No need to use formatting strbuf method
We have addch() for chars, add() for fixed size data, and addstr() for
variable length strings, use them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ap02fn2xtvpduj2j6b2o1j4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 18:44:09 +0000 (15:44 -0300)]
perf help: Use asprintf instead of adhoc equivalents
That doesn't chekcs malloc return and that, when using strbuf, if it
can't grow, just explodes away via die().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vr8qsjbwub7e892hpa9msz95@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bjorn Helgaas [Wed, 23 Mar 2016 18:47:23 +0000 (13:47 -0500)]
net: Fix typos and whitespace.
Fix typos. Capitalize CPU, NAPI, RCU consistently. Align structure
indentation. No functional change intended; only comment and whitespace
changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Wed, 23 Mar 2016 16:43:10 +0000 (09:43 -0700)]
hv_netvsc: Fix the array sizes to be max supported channels
The VRSS_CHANNEL_MAX is the max number of channels supported by Hyper-V
hosts. We use it for the related array sizes instead of using NR_CPUS,
which may be set to several thousands.
This patch reduces possible memory allocation failures.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Wed, 23 Mar 2016 16:43:09 +0000 (09:43 -0700)]
hv_netvsc: Fix accessing freed memory in netvsc_change_mtu()
struct netvsc_device is freed in rndis_filter_device_remove(). So we save
the nvdev->num_chn into a temp variable for later usage.
(Please also include this patch into stable branch.)
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 23 Mar 2016 15:38:55 +0000 (16:38 +0100)]
ppp: take reference on channels netns
Let channels hold a reference on their network namespace.
Some channel types, like ppp_async and ppp_synctty, can have their
userspace controller running in a different namespace. Therefore they
can't rely on them to preclude their netns from being removed from
under them.
==================================================================
BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at
addr
ffff880064e217e0
Read of size 8 by task syz-executor/11581
=============================================================================
BUG net_namespace (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906
[< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440
[< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469
[< inline >] slab_alloc_node kernel/mm/slub.c:2532
[< inline >] slab_alloc kernel/mm/slub.c:2574
[< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579
[< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597
[< inline >] net_alloc kernel/net/core/net_namespace.c:325
[< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360
[< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95
[< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150
[< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451
[< inline >] copy_process kernel/kernel/fork.c:1274
[< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723
[< inline >] SYSC_clone kernel/kernel/fork.c:1832
[< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826
[< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185
INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631
[< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650
[< inline >] slab_free kernel/mm/slub.c:2805
[< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814
[< inline >] net_free kernel/net/core/net_namespace.c:341
[< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348
[< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448
[< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036
[< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170
[< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303
[< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468
INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000
flags=0x5fffc0000004080
INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200
CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300
ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054
ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000
Call Trace:
[< inline >] __dump_stack kernel/lib/dump_stack.c:15
[<
ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50
[<
ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654
[<
ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661
[< inline >] print_address_description kernel/mm/kasan/report.c:138
[<
ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236
[< inline >] kasan_report kernel/mm/kasan/report.c:259
[<
ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280
[< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218
[<
ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[< inline >] ppp_pernet kernel/include/linux/compiler.h:218
[<
ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293
[<
ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<
ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241
[<
ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000
[<
ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478
[<
ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744
[<
ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772
[<
ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901
[<
ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688
[<
ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208
[<
ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244
[<
ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115
[< inline >] exit_task_work kernel/include/linux/task_work.h:21
[<
ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750
[<
ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123
[<
ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357
[<
ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550
[<
ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145
[<
ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880
[<
ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307
[< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113
[<
ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158
[<
ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712
[<
ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655
[<
ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165
[<
ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692
[< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099
[<
ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678
[< inline >] ? context_switch kernel/kernel/sched/core.c:2807
[<
ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283
[<
ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247
[< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282
[<
ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344
[<
ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281
Memory state around the buggy address:
ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes:
273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 18:25:02 +0000 (15:25 -0300)]
perf tools: Remove unused perf_pathdup, xstrdup functions
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s87zi5d03m6rz622y1z6rlsa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 18:16:55 +0000 (15:16 -0300)]
perf tools: Do not include stringify.h from the kernel sources
Use instead the copy just made to tools/include/linux/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q736w12nwy98x5ox2hamp5ow@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexander Duyck [Tue, 22 Mar 2016 23:18:07 +0000 (16:18 -0700)]
net: Reset encap_level to avoid resetting features on inner IP headers
This patch corrects an oversight in which we were allowing the encap_level
value to pass from the outer headers to the inner headers. As a result we
were incorrectly identifying UDP or GRE tunnels as also making use of ipip
or sit when the second header actually represented a tunnel encapsulated in
either a UDP or GRE tunnel which already had the features masked.
Fixes:
76443456227097179c1482 ("net: Move GSO csum into SKB_GSO_CB")
Reported-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 18:14:27 +0000 (15:14 -0300)]
tools include: Copy linux/stringify.h from the kernel
There is code in tools/ that is directly including this file from the
kernel, and this is verboten for a while, copy it so that the next csets
can fix this situation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e0r3nks2uai020ndghvxv5qw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt [Wed, 23 Mar 2016 14:16:28 +0000 (10:16 -0400)]
tools lib traceevent: Remove redundant CPU output
Commit
a6745330789f ("tools lib traceevent: Split pevent_print_event()
into specific functionality functions") broke apart the function
pevent_print_event() into three functions.
The first function prints the comm, pid and CPU, the second prints the
timestamp.
But that commit added the printing of the CPU in the timestamp function,
which now causes pevent_print_event() to duplicate the CPU output.
Remove the redundant printing of the record's CPU from the timestamp
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes:
a6745330789f ("tools lib traceevent: Split pevent_print_event() into specific functionality functions")
Link: http://lkml.kernel.org/r/20160323101628.459375d2@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Mar 2016 18:06:35 +0000 (15:06 -0300)]
perf tools: Remove needless 'extern' from function prototypes
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-w246stf7ponfamclsai6b9zo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vladimir Zapolskiy [Tue, 22 Mar 2016 23:06:04 +0000 (01:06 +0200)]
net: mediatek: fix checking for NULL instead of IS_ERR() in .probe
devm_ioremap_resource() returns ERR_PTR() value on error, it never
returns NULL, fix it and propagate the returned error upwards.
Fixes:
656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Frias [Wed, 23 Mar 2016 10:49:09 +0000 (11:49 +0100)]
net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
This removes the dependency on GPIOLIB for non faulty PHYs.
Indeed, without this patch, if GPIOLIB is not selected
devm_gpiod_get_optional() will return -ENOSYS and the driver probe
call will fail, regardless of the actual PHY hardware.
Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035),
only AT8030 presents the issues that commit
13a56b449325 ("net: phy:
at803x: Add support for hardware reset") attempts to work-around by
using a 'reset' GPIO line.
Hence, only AT8030 should depend on GPIOLIB operating properly.
Fixes:
13a56b449325 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Tue, 22 Mar 2016 21:44:40 +0000 (00:44 +0300)]
at803x: fix reset handling
The driver of course "knows" that the chip's reset signal is active low,
so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however
all this will only work iff the GPIO is specified as active-high in the
device tree! I think both the driver and the device trees (if there are
any -- I was unable to find them) need to be fixed in this case...
Fixes:
13a56b449325 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej S. Szmigiero [Sun, 6 Mar 2016 22:40:19 +0000 (23:40 +0100)]
hp-wmi: Remove GPS rfkill support via pre-2009 interface
GPS rfkill support via pre-2009 WMI interface uses hp_wmi_get_sw_state()
and hp_wmi_get_hw_state() to query its current hard and soft block state,
respectively.
In hp_wmi_get_sw_state() a mask is calculated which bit should be checked
in an int value returned by firmware to get current block state: 0x200 <<
(r * 8) which with r being 3 for GPS results in overflow and mask of zero.
The same goes for hp_wmi_get_hw_state().
This effectively means that GPS rfkill on this WMI interface is considered
always both hard and soft blocked.
Unfortunately, later when rfkill subsystem calls hp_wmi_set_block() to sync
this block to hardware firmware at least on my old nc6400 gets confused and
sets both hard and soft blocks on WiFi and BT.
This happens for example on hp-wmi module load.
Since due to overflow described above it is dubious that this ever worked
correctly and HP laptops with modems having GPS support seem to all have
been released well past year 2009 let's just remove GPS rfkill support via
pre-2009 WMI interface.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Maciej S. Szmigiero [Sun, 6 Mar 2016 22:38:36 +0000 (23:38 +0100)]
hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
rfkill registration order in hp_wmi_rfkill_setup() is:
1) WiFi,
2) BT,
3) WWAN,
5) GPS.
Unregistration when cleaning up on error return should happen in reverse
order.
This means that: If BT rfkill fails to be allocated we possibly need to
first unregister WiFi rfkill before destroying it.
The same goes with (WWAN, BT) and (GPS, WWAN) pairs.
Also, if WWAN rfkill fails to register we need to (possibly) unregister BT
not the GPS one. And if GPS rfkill fails to register we need to unregister
WWAN not the BT one.
We never need to unregister GPS rfkill here since if GPS rfkill
registration succeeds this function returns without error so no cleanup is
necessary.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Michał Kępień [Fri, 4 Mar 2016 13:09:10 +0000 (14:09 +0100)]
dell-wmi: support Dell Inspiron M5110
Similarly to Dell Vostro V131, Dell Inspiron M5110 also requires an
SMBIOS request to be issued in order for WMI events to be generated and
does not raise an i8042 interrupt when the Dell Instant Launch hotkey is
pressed. However, the event code for that hotkey on this machine is
0xe029, so add it to the legacy keymap.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Darek Stojaczyk <darek.stojaczyk@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Michał Kępień [Fri, 4 Mar 2016 13:09:09 +0000 (14:09 +0100)]
dell-wmi: properly process Dell Instant Launch hotkey
On models on which an SMBIOS request needs to be issued in order for WMI
events to be generated, pressing the Dell Instant Launch hotkey does not
raise an i8042 interrupt - only a WMI event is generated (0xe025 on Dell
Vostro V131). As that WMI event is the only way the kernel will be
notified about pressing the Dell Instant Launch hotkey on such machines,
the relevant keymap entry has to be changed to a KE_KEY one. However,
the same WMI event should still be ignored on machines which do not
require an SMBIOS request for enabling WMI, so filter it conditionally
in dell_wmi_process_key().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Michał Kępień [Fri, 4 Mar 2016 13:09:08 +0000 (14:09 +0100)]
dell-wmi: enable receiving WMI events on Dell Vostro V131
On some laptop models (e.g. Dell Vostro V131), WMI events are not
generated until a specific SMBIOS request is issued to register an event
listener [1]. As there seems to be no ACPI method or SMBIOS request to
determine without possible side effects whether a given machine needs to
issue this SMBIOS request in order to receive WMI events, DMI matching
is used to whitelist the models which need it.
[1] https://lists.us.dell.com/pipermail/libsmbios-devel/2015-July/000612.html
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Michał Kępień [Fri, 4 Mar 2016 13:09:07 +0000 (14:09 +0100)]
dell-smbios: rename dell_smi_error() to dell_smbios_error()
As dell_smi_error() is exported by dell-smbios, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_error().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Michał Kępień [Fri, 4 Mar 2016 13:09:06 +0000 (14:09 +0100)]
dell-laptop: move dell_smi_error() to dell-smbios
The dell_smi_error() method could be used by modules other than
dell-laptop for convenient translation of SMBIOS request errors into
errno values. Thus, move it to dell-smbios.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
John Dahlstrom [Sat, 27 Feb 2016 06:09:58 +0000 (00:09 -0600)]
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
Some Lenovo ideapad models lack a physical rfkill switch.
On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK,
ideapad-laptop would wrongly report all radios as blocked by
hardware which caused wireless network connections to fail.
Add these models without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: John Dahlstrom <jodarom@sdf.org>
Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dab: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
Cc: <stable@vger.kernel.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Michał Kępień [Wed, 24 Feb 2016 13:23:32 +0000 (14:23 +0100)]
fujitsu-laptop: Support radio toggle button
Lifebook E734/E744/E754 has a radio toggle button which uses code 0x420.
Map it to KEY_RFKILL.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Wolfram Sang [Sun, 21 Feb 2016 14:22:27 +0000 (15:22 +0100)]
intel-hid: allocate correct amount of memory for private struct
We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Paul Gortmaker [Sun, 14 Feb 2016 20:00:52 +0000 (15:00 -0500)]
platform/x86: Make intel_scu_ipc explicitly non-modular
The Kconfig currently controlling compilation of this code is:
drivers/platform/x86/Kconfig:config INTEL_SCU_IPC
drivers/platform/x86/Kconfig: bool "Intel SCU IPC Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_pci_driver() uses the same init level priority as
builtin_pci_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We don't replace module.h with init.h since the file already has that.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Qipeng Zha [Wed, 17 Feb 2016 18:03:38 +0000 (02:03 +0800)]
intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
During legacy suspend flow, IPC1 commands are being requested
from opregion driver. But the PMC_IPC1 command will timeout as example:
[ 281.444600] ipc_debug##: ipc_send_command: cmd=0x201ff,
[ 281.444648] wbuf[0]=0x4ea6
[ 281.444668] wbuf[1]=0x0
[ 281.444674] wbuf[2]=0x0
[ 281.444676] wbuf[3]=0x0
[ 284.446467] pmc-ipc-plat INT34D2:00: IPC timed out, TS=0x4, CMD=0x200ff
This is because before the opregion driver could send IPC1 commands,
the PMC_IPC irq is already suspended. Which makes the IPC command to
timeout.
Solution: register pmc_ipc irq as IRQF_NO_SUSPEND
Signed-off-by: Ananth Krishna R <ananth.krishna.r@intel.com>
Signed-off-by: Bharath K Veera <bharath.k.veera@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>