clk: ti: fix double free in of_ti_divider_clk_setup()

[ Upstream commit 7af5b9eadd64c9e02a71f97c45bcdf3b64841f6b ]

The "div" pointer is freed in _register_divider() and again in
of_ti_divider_clk_setup().  Delete the free in _register_divider()

Fixes: fbbc18591585 ("clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/6d36eeec-6c8a-4f11-a579-aa3cd7c38749@moroto.mountain
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: keystone: pll: fix a couple NULL vs IS_ERR() checks

[ Upstream commit a5d14f8b551eb1551c10053653ee8e27f19672fa ]

The clk_register_divider() and clk_register_mux() functions returns
error pointers on error but this code checks for NULL.  Fix that.

Fixes: b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d9da4c97-0da9-499f-9a21-1f8e3f148dc1@moroto.mountain
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ralink: mtmips: quiet unused variable warning

[ Upstream commit 619102313466eaf8a6ac188e711f5df749dac6d4 ]

When CONFIG_OF is disabled then the matching table is not referenced and
the following warning appears:

drivers/clk/ralink/clk-mtmips.c:821:34: warning: unused variable 'mtmips_of_match' [-Wunused-const-variable]
821 |   static const struct of_device_id mtmips_of_match[] = {
    |                          ^

There are two match tables in the driver: one for the clock driver and the
other for the reset driver. The only difference between them is that the
clock driver uses 'data' and does not have 'ralink,rt2880-reset' compatible.
Both just can be merged into a single one just by adding the compatible
'ralink,rt2880-reset' entry to 'mtmips_of_match[]', which will allow it to
be used for 'mtmips_clk_driver' (which doesn't use the data) as well as for
'mtmips_clk_init()' (which doesn't need get called for 'ralink,rt2880-reset').

Doing in this way ensures that 'CONFIG_OF' is not disabled anymore so the
above warning disapears.

Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307242310.CdOnd2py-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230827023932.501102-1-sergio.paracuellos@gmail.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: nxp-fspi: use the correct ioremap function

[ Upstream commit c3aa5cb264a38ae9bbcce32abca4c155af0456df ]

AHB memory as MMIO should be mapped with ioremap rather than ioremap_wc,
which should have been used initially just to handle unaligned access as
a workaround.

Fixes: d166a73503ef ("spi: fspi: dynamically alloc AHB memory")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20231010201524.2021340-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: linux/clk-provider.h: fix kernel-doc warnings and typos

[ Upstream commit 84aefafe6b294041b7fa0757414c4a29c1bdeea2 ]

Fix spelling of "Structure".

Fix multiple kernel-doc warnings:

clk-provider.h:269: warning: Function parameter or member 'recalc_rate' not described in 'clk_ops'
clk-provider.h:468: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:468: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:482: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:482: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:687: warning: Function parameter or member 'flags' not described in 'clk_divider'
clk-provider.h:1164: warning: Function parameter or member 'flags' not described in 'clk_fractional_divider'
clk-provider.h:1164: warning: Function parameter or member 'approximation' not described in 'clk_fractional_divider'
clk-provider.h:1213: warning: Function parameter or member 'flags' not described in 'clk_multiplier'

Fixes: 9fba738a53dd ("clk: add duty cycle support")
Fixes: b2476490ef11 ("clk: introduce the common clock framework")
Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers")
Fixes: f5290d8e4f0c ("clk: asm9260: use parent index to link the reference clock")
Fixes: 9d9f78ed9af0 ("clk: basic clock hardware types")
Fixes: e2d0e90fae82 ("clk: new basic clk type for fractional divider")
Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230930221428.18463-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l: Fix computation formula

[ Upstream commit a2b23159499efd36b2d63b3c4534075d12ddc97a ]

According to the hardware manual for RZ/G2L
(r01uh0914ej0130-rzg2l-rzg2lc.pdf), the computation formula for PLL rate
is as follows:

    Fout = ((m + k/65536) * Fin) / (p * 2^s)

and k has values in the range [-32768, 32767].  Dividing k by 65536 with
integer arithmetic gives zero all the time, causing slight differences
b/w what has been set vs. what is displayed.  Thus, get rid of this and
decompose the formula before dividing k by 65536.

Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-6-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields

[ Upstream commit 72977f07b035e488c3f1928832a1616c6cae7278 ]

Use FIELD_GET() for PLL register fields.  This is its purpose.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-14-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: a2b23159499e ("clk: renesas: rzg2l: Fix computation formula")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l: Trust value returned by hardware

[ Upstream commit bf51d3b2d048c312764a55d91d67a85ee5535e31 ]

The onitial value of the CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b.  The
hardware user's manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that
setting 0 is prohibited.  Hence rzg2l_cpg_sd_clk_mux_get_parent() should
just read CPG_PL2SDHI_DSEL, trust the value, and return the proper clock
parent index based on the value read.

Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-5-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l: Lock around writes to mux register

[ Upstream commit d2692ed490e680a41401cef879adebcfafb4298f ]

The SD MUX output (SD0) is further divided by 4 in G2{L,UL}.  The
divided clock is SD0_DIV4. SD0_DIV4 is registered with
CLK_SET_RATE_PARENT which means a rate request for it is propagated to
the MUX and could reach rzg2l_cpg_sd_clk_mux_set_parent() concurrently
with the users of SD0.
Add proper locking to avoid concurrent accesses on SD MUX set rate
registers.

Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-4-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l: Wait for status bit of SD mux before continuing

[ Upstream commit 549f4ae2601f968e2474c6031fb4799468882f64 ]

The hardware user manual for RZ/G2L (r01uh0914ej0130-rzg2l-rzg2lc.pdf,
chapter 7.4.7 Procedure for Switching Clocks by the Dynamic Switching
Frequency Selectors) specifies that we need to check CPG_PL2SDHI_DSEL
for SD clock switching status.

Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-3-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rcar-gen3: Extend SDnH divider table

[ Upstream commit d5252d9697a3e7007c741e9c103073868955a304 ]

The clock dividers might be used with clock stop bit enabled or not.
Current tables only support recommended values from the datasheet.  This
might result in warnings like below because no valid clock divider is
found. Resulting in a 0 divider.

There are Renesas ARM Trusted Firmware version out there which e.g.
configure 0x201 (shifted logical right by 2: 0x80) and with this match
the added { STPnHCK | 0, 1 }:

https://github.com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.3/drivers/renesas/rcar/emmc/emmc_init.c#L108

------------[ cut here ]------------
sd1h: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
WARNING: CPU: 1 PID: 1 at drivers/clk/clk-divider.c:141 divider_recalc_rate+0x48/0x70
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.52 #1
Hardware name: Custom board based on r8a7796 (DT)
pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : divider_recalc_rate+0x48/0x70
...
------------[ cut here ]------------

Fixes: bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
[wsa: extended the table to 5 entries, added comments, reword commit message a little]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230928080317.28224-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8qxp: Fix elcdif_pll clock

[ Upstream commit 15cee75dacb82ade710d61bfd536011933ef9bf2 ]

Move the elcdif_pll clock initialization before the lcd_clk, since the
elcdif_clk needs to be initialized ahead of lcd_clk, being its parent.
This change fixes issues with the LCD clocks during suspend/resume.

Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks")
Suggested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-2-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8mq: correct error handling path

[ Upstream commit 577ad169966e6e75b10e004389a3f79813e84b5d ]

Avoid memory leak in error handling path. It does not make
much sense for the SoC without clk driver, to make program behavior
correct, let's fix it.

Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309240551.e46NllPa-lkp@intel.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231001122618.194498-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8: Fix an error handling path in imx8_acm_clk_probe()

[ Upstream commit e9a164e367f039629fd5466a79b9f495646e1261 ]

If an error occurs after a successful clk_imx_acm_attach_pm_domains() call,
it must be undone.

Add an explicit error handling path, re-order the code and add the missing
clk_imx_acm_detach_pm_domains() call.

Fixes: d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8: Fix an error handling path if devm_clk_hw_register_mux_parent_data_table() fails

[ Upstream commit 9a0108acdb1b6189dcc8f9318edfc6b7e0281df4 ]

If a devm_clk_hw_register_mux_parent_data_table() call fails, it is likely
that the probe should fail with an error code.

Set 'ret' before leaving the function.

Fixes: d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8: Fix an error handling path in clk_imx_acm_attach_pm_domains()

[ Upstream commit 156624e2cf815ce98fad5a24f04370f4459ae6f4 ]

If a dev_pm_domain_attach_by_id() call fails, previously allocated
resources need to be released.

Fixes: d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: Select MXC_CLK for CLK_IMX8QXP

[ Upstream commit 317e69c49b4ceef8aebb47d771498ccb3571bdf9 ]

If the i.MX8QXP clock provider is built-in but the MXC_CLK is
built as module, build fails:

aarch64-linux-ld: drivers/clk/imx/clk-imx8-acm.o: in function `imx8_acm_clk_probe':
clk-imx8-acm.c:(.text+0x3d0): undefined reference to `imx_check_clk_hws'

Fix that by selecting MXC_CLK in case of CLK_IMX8QXP.

Fixes: c2cccb6d0b33 ("clk: imx: add imx8qxp clk driver")
Closes: https://lore.kernel.org/all/8b77219e-b59e-40f1-96f1-980a0b2debcf@infradead.org/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: mt6358: Fail probe on unknown chip ID

[ Upstream commit 7442edec72bc657e6ce38ae01de9f10e55decfaa ]

The MT6358 and MT6366 PMICs, and likely many others from MediaTek, have
a chip ID register, making the chip semi-discoverable.

The driver currently supports two PMICs and expects to be probed on one
or the other. It does not account for incorrect mfd driver entries or
device trees. While these should not happen, if they do, it could be
catastrophic for the device. The driver should be sure the hardware is
what it expects.

Make the driver fail to probe if the chip ID presented is not a known
one.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: f0e3c6261af1 ("regulator: mt6366: Add support for MT6366 regulator")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230913082919.1631287-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: sim: initialize a managed pointer when declaring it

[ Upstream commit 9f93f18305f5777820491e6ab9b34422c160371b ]

Variables managed with __free() should typically be initialized where
they are declared so that the __free() callback is paired with its
counterpart resource allocator. Fix the second instance of using
__free() in gpio-sim to follow this pattern.

Fixes: 3faf89f27aab ("gpio: sim: simplify code with cleanup helpers")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src

[ Upstream commit 7138c244fb293f24ce8ab782961022eff00a10c4 ]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
Tested-by: Arseniy Velikanov <adomerlee@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913175612.8685-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: mmcc-msm8998: Fix the SMMU GDSC

[ Upstream commit 1fc62c8347397faf4e18249e88ecd4470c0a5357 ]

The SMMU GDSC doesn't have to be ALWAYS-ON and shouldn't feature the
HW_CTRL flag (it's separate from hw_ctrl_addr).  In addition to that,
it should feature a cxc entry for bimc_smmu_axi_clk and be marked as
votable.

Fix all of these issues.

Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-5-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: mmcc-msm8998: Don't check halt bit on some branch clks

[ Upstream commit 9906c4140897bbdbff7bb71c6ae67903cb9954ce ]

Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.

Use the BRANCH_HALT_SKIP define to skip checking the halt bit.

Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-4-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies

[ Upstream commit f7b7d30158cff246667273bd2a62fc93ee0725d2 ]

If the parent clock rate is greater than unsigned long max/2 then
integer overflow happens when calculating the clock rate on 32-bit systems.
As RCG2 uses half integer dividers, the clock rate is first being
multiplied by 2 which will overflow the unsigned long max value.
Hence, replace the common pattern of doing 64-bit multiplication
and then a do_div() call with simpler mult_frac call.

Fixes: bcd61c0f535a ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com
[bjorn: Also drop unnecessary {} around single statements]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-msm8996: Remove RPM bus clocks

[ Upstream commit 4afda5f6bcdf673ef2556fcfa458daf3a5a648d8 ]

The GCC driver contains clocks that are owned (meaning configured and
scaled) by the RPM core.

Remove them from Linux to stop interjecting the RPM's logic.

Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-rpmbusclocks8996gcc-v1-1-9e99bedcdc3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks

[ Upstream commit ccd8ab030643040600a663edde56b434b6f4fb6c ]

IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.

Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/1693474133-10467-1-git-send-email-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra: Fix missing IRQ check in tegra_slink_probe()

[ Upstream commit eb9913b511f10968a02cfa5329a896855dd152a3 ]

This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.

Fix this by stop calling request_irq() with invalid IRQ #s.

Fixes: dc4dc3605639 ("spi: tegra: add spi driver for SLINK controller")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/tencent_73FCC06A3D1C14EE5175253C6FB46A07B709@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: debugfs: Fix a erroneous check after snprintf()

[ Upstream commit d3601857e14de6369f00ae19564f1d817d175d19 ]

This error handling looks really strange.
Check if the string has been truncated instead.

Fixes: f0c2319f9f19 ("regmap: Expose the driver name in debugfs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/8595de2462c490561f70020a6d11f4d6b652b468.1693857825.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvlan: properly track tx_errors

[ Upstream commit ff672b9ffeb3f82135488ac16c5c5eb4b992999b ]

Both ipvlan_process_v4_outbound() and ipvlan_process_v6_outbound()
increment dev->stats.tx_errors in case of errors.

Unfortunately there are two issues :

1) ipvlan_get_stats64() does not propagate dev->stats.tx_errors to user.

2) Increments are not atomic. KCSAN would complain eventually.

Use DEV_STATS_INC() to not miss an update, and change ipvlan_get_stats64()
to copy the value back to user.

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Link: https://lore.kernel.org/r/20231026131446.3933175-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add DEV_STATS_READ() helper

[ Upstream commit 0b068c714ca9479d2783cc333fff5bc2d4a6d45c ]

Companion of DEV_STATS_INC() & DEV_STATS_ADD().

This is going to be used in the series.

Use it in macsec_get_stats64().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ff672b9ffeb3 ("ipvlan: properly track tx_errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: use u64_stats_t infra to avoid data-races

[ Upstream commit 61217d8f6360437329af1b16b8bbd9143167718d ]

syzbot reported a data-race in virtnet_poll / virtnet_stats [1]

u64_stats_t infra has very nice accessors that must be used
to avoid potential load-store tearing.

[1]
BUG: KCSAN: data-race in virtnet_poll / virtnet_stats

read-write to 0xffff88810271b1a0 of 8 bytes by interrupt on cpu 0:
virtnet_receive drivers/net/virtio_net.c:2102 [inline]
virtnet_poll+0x6c8/0xb40 drivers/net/virtio_net.c:2148
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
invoke_softirq kernel/softirq.c:427 [inline]
__irq_exit_rcu kernel/softirq.c:632 [inline]
irq_exit_rcu+0x3b/0x90 kernel/softirq.c:644
common_interrupt+0x7f/0x90 arch/x86/kernel/irq.c:247
asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:636
__sanitizer_cov_trace_const_cmp8+0x0/0x80 kernel/kcov.c:306
jbd2_write_access_granted fs/jbd2/transaction.c:1174 [inline]
jbd2_journal_get_write_access+0x94/0x1c0 fs/jbd2/transaction.c:1239
__ext4_journal_get_write_access+0x154/0x3f0 fs/ext4/ext4_jbd2.c:241
ext4_reserve_inode_write+0x14e/0x200 fs/ext4/inode.c:5745
__ext4_mark_inode_dirty+0x8e/0x440 fs/ext4/inode.c:5919
ext4_evict_inode+0xaf0/0xdc0 fs/ext4/inode.c:299
evict+0x1aa/0x410 fs/inode.c:664
iput_final fs/inode.c:1775 [inline]
iput+0x42c/0x5b0 fs/inode.c:1801
do_unlinkat+0x2b9/0x4f0 fs/namei.c:4405
__do_sys_unlink fs/namei.c:4446 [inline]
__se_sys_unlink fs/namei.c:4444 [inline]
__x64_sys_unlink+0x30/0x40 fs/namei.c:4444
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88810271b1a0 of 8 bytes by task 2814 on cpu 1:
virtnet_stats+0x1b3/0x340 drivers/net/virtio_net.c:2564
dev_get_stats+0x6d/0x860 net/core/dev.c:10511
rtnl_fill_stats+0x45/0x320 net/core/rtnetlink.c:1261
rtnl_fill_ifinfo+0xd0e/0x1120 net/core/rtnetlink.c:1867
rtnl_dump_ifinfo+0x7f9/0xc20 net/core/rtnetlink.c:2240
netlink_dump+0x390/0x720 net/netlink/af_netlink.c:2266
netlink_recvmsg+0x425/0x780 net/netlink/af_netlink.c:1992
sock_recvmsg_nosec net/socket.c:1027 [inline]
sock_recvmsg net/socket.c:1049 [inline]
____sys_recvmsg+0x156/0x310 net/socket.c:2760
___sys_recvmsg net/socket.c:2802 [inline]
__sys_recvmsg+0x1ea/0x270 net/socket.c:2832
__do_sys_recvmsg net/socket.c:2842 [inline]
__se_sys_recvmsg net/socket.c:2839 [inline]
__x64_sys_recvmsg+0x46/0x50 net/socket.c:2839
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x000000000045c334 -> 0x000000000045c376

Fixes: 3fa2a1df9094 ("virtio-net: per cpu 64 bit stats (v2)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: avoid atomic fragment on GSO packets

[ Upstream commit 03d6c848bfb406e9ef6d9846d759e97beaeea113 ]

When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].

Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.

Link: https://www.potaroo.net/presentations/2022-03-01-ipv6-frag.pdf
Fixes: b210de4f8c97 ("net: ipv6: Validate GSO SKB before finish IPv6 processing")
Reported-by: David Wragg <dwragg@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Link: https://lore.kernel.org/r/90912e3503a242dca0bc36958b11ed03a2696e5e.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: properly account fastopen data

[ Upstream commit bf0e96108fb6707613dd055aff5e98b02b99bb14 ]

Currently the socket level counter aggregating the received data
does not take in account the data received via fastopen.

Address the issue updating the counter as required.

Fixes: 38967f424b5b ("mptcp: track some aggregate data counters")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-2-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()

[ Upstream commit 48cf49d31994ff97b33c4044e618560ec84d35fb ]

snprintf() does not return negative values on error.

To know if the buffer was too small, the returned value needs to be
compared with the length of the passed buffer. If it is greater or
equal, the output has been truncated, so add checks for the truncation
to create_pnp_modalias() and create_of_modalias(). Also make them
return -ENOMEM in that case, as they already do that elsewhere.

Moreover, the remaining size of the buffer used by snprintf() needs to
be updated after the first write to avoid out-of-bounds access as
already done correctly in create_pnp_modalias(), but not in
create_of_modalias(), so change the latter accordingly.

Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix unnecessary -EBUSY from htab_lock_bucket

[ Upstream commit d35381aa73f7e1e8b25f3ed5283287a64d9ddff5 ]

htab_lock_bucket uses the following logic to avoid recursion:

1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
   2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();

However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.

This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:

1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
   3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().

Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().

Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sync: Fix Opcode prints in bt_dev_dbg/err

[ Upstream commit 530886897c789cf77c9a0d4a7cc5549f0768b5f8 ]

Printed Opcodes may be missing leading zeros:

Bluetooth: hci0: Opcode 0x c03 failed: -110

Fix this by always printing leading zeros:

Bluetooth: hci0: Opcode 0x0c03 failed: -110

Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")
Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Make handle of hci_conn be unique

[ Upstream commit 181a42edddf51d5d9697ecdf365d72ebeab5afb0 ]

The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.

Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: ISO: Pass BIG encryption info through QoS

[ Upstream commit 1d11d70d1f6b23e7d3fc00396c17b90b876162a4 ]

This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.

After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.

After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: empty overflow queue during flush

[ Upstream commit 658939fc68d3241f9a0019e224cd7154438c23f2 ]

If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.

Fixes: a44509805895 ("iwlwifi: move reclaim flows to the queue file")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: update IGTK in mvmvif upon D3 resume

[ Upstream commit ac0c6fdc4c56b669abc1c4a323f1c7a3a1422dd2 ]

During the D3 resume flow, all new rekeys are passed from the FW.
Because the FW supports only one IGTK at a time, every IGTK rekey
update should be done by removing the last IGTK. The mvmvif holds a
pointer to the last IGTK for that reason and thus should be updated
when a new IGTK is passed upon resume.

Fixes: 04f78e242fff ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow")
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.8ceaf7e5ece7.Ief444f6a2703ed76648b4d414f12bb4130bab36e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: pcie: synchronize IRQs before NAPI

[ Upstream commit 37fb29bd1f90f16d1abc95c0e9f0ff8eec9829ad ]

When we want to synchronize the NAPI, which was added in
commit 5af2bb3168db ("wifi: iwlwifi: call napi_synchronize()
before freeing rx/tx queues"), we also need to make sure we
can't actually reschedule the NAPI. Yes, this happens while
interrupts are disabled, but interrupts may still be running
or pending. Also call iwl_pcie_synchronize_irqs() to ensure
we won't reschedule the NAPI.

Fixes: 4cf2f5904d97 ("iwlwifi: queue: avoid memory leak in reset flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.a0f4104b479a.Id5c50a944f709092aa6256e32d8c63b2b8d8d3ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix netif csum flags

[ Upstream commit 08365d3b9140c751a84f8027ac7d2e662958f768 ]

We shouldn't advertise arbitrary checksum flags since we had
to remove support for it due to broken hardware.

Fixes: ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.e37327f1a129.Iaee86b00db4db791cd90adaf15384b8c87d2ad49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: increase number of RX buffers for EHT devices

[ Upstream commit 2cf254c1e24fa8f01f42f5a8c77617e56bf50b86 ]

EHT devices can support 512 MPDUs in an A-MPDU, each of
which might be an A-MSDU and thus further contain multiple
MSDUs, which need their own buffer each. Increase the number
of buffers to avoid running out in high-throughput scenarios.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.824e522927f1.Ie5b4a2d3953072b9d76054ae67e2e45900d6bba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 08365d3b9140 ("wifi: iwlwifi: mvm: fix netif csum flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: remove TDLS stations from FW

[ Upstream commit 7b404c5cff3d4270fcd5212b6776c8484623ac74 ]

When we remove TDLS stations, we need to remove them from FW
immediately, even while associated. Some previous refactoring
here lost the sta ID condition, add it back.

Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.933011e710a9.I77c069c781e8b2b698b86cc3f43fc3c7e2dde114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()

[ Upstream commit 43874283ce6c5bd32ac9d30878b2c96a974357cb ]

When I implemented iwl_mvm_mac_flush_sta() I completely botched it;
it basically always happens after the iwl_mvm_sta_pre_rcu_remove()
call, and that already clears mvm->fw_id_to_mac_id[] entries, so we
cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it
never did anything.

Fix this by just going through the station IDs and now with the new
API for iwl_mvm_flush_sta(), call those.

Fixes: a6cc6ccb1c8a ("wifi: iwlwifi: mvm: support new flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b5878e93118.I1093e60163052e7be64d2b01424097cd6a272979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: change iwl_mvm_flush_sta() API

[ Upstream commit 391762969769b089c808defc8fce5544a945f9eb ]

This API is type unsafe and needs an extra parameter to know
what kind of station was passed, so it has two, but really it
only needs two values. Just pass the values instead of doing
this type-unsafe dance, which will also make it better to use
for multi-link.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.aeb3bf4204cd.I5b0e6d64a67455784bc8fbdaf9ceaf03699d9ce1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 43874283ce6c ("wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: Don't always bind/link the P2P Device interface

[ Upstream commit 84ef7cbe90e9e54c71c1da4e645ba34e1b33da77 ]

It is not necessary to keep the P2P Device bound/linked to a PHY
context when there is no active ROC.

Modify the P2P Device flows so the binding/linking would be done
only while ROC is active. With this change the switch_phy_ctxt()
is no longer needed so remove it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 43874283ce6c ("wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: Fix key flags for IGTK on AP interface

[ Upstream commit 8f9a791a8edd87fa64b35037d9c3bce89a1b8d21 ]

When an IGTK is installed for an AP interface, there is no station
associated with it. However, the MFP flag must be set for the installed
key as otherwise the FW wouldn't use it.

Fix the security key flag to set the MFP flag also when the AP is
an AP interface and the key index matches that of an IGTK.

Fixes: 5c75a208c244 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.f67005e2d4d2.I6832c6e87f3c79fff00689eb10a3a30810e1ee83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: Correctly set link configuration

[ Upstream commit 35b9281fb710ea9fa47dca56774f4a9606fe9154 ]

In case the link puncturing is changed such that the channel
is no longer punctured, configure the FW correctly indicating
the EHT parameters changed (with a 0 punctured map).

Allow EHT parameters configuration only when the link really
supports EHT.

Fixes: 55eb1c5fa4b2 ("wifi: iwlwifi: mvm: add support for the new LINK command")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: yoyo: swap cdb and jacket bits values

[ Upstream commit 65008777b9dcd2002414ddb2c2158293a6e2fd6f ]

The bits are wrong, the jacket bit should be 5 and cdb bit 4.
Fix it.

Fixes: 1f171f4f1437 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.356d8dacda2f.I349ab888b43a11baa2453a1d6978a6a703e422f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Fix setting vif links

[ Upstream commit e7182c4e6bbeafa272612e6c06fa92b42ad107ad ]

When setting the interface links, ignore the change iff both the
valid links and the dormant links did not change. This is needed
to support cases where the valid links didn't change but the dormant
links did.

Fixes: 6d543b34dbcf ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.0357b6306587.I7dbfec347949b629fea680d246a650d6207ff217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: don't recreate driver link debugfs in reconfig

[ Upstream commit 822cab1987a0e028e38b60aecd98af0289b46e7b ]

We can delete any that we want to remove, but we can't
recreate the links as they already exist.

Fixes: 170cd6a66d9a ("wifi: mac80211: add netdev per-link debugfs data and driver hook")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.3d0214838421.I512a0ff86f631ff42bf25ea0cb2e8e8616794a94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: use correct sta ID for IGTK/BIGTK

[ Upstream commit 63ef576c9facf5d92702e249ad213fa73eb434bf ]

We don't (yet) send the IGTK down to the firmware, but when
we do it needs to be with the broadcast station ID, not the
multicast station ID. Same for the BIGTK, which we may send
already if firmware advertises it (but it doesn't yet.)

Fixes: a5de7de7e78e ("wifi: iwlwifi: mvm: enable TX beacon protection")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.dbc653913353.I82e90c86010f0b9588a180d9835fd11f666f5196@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix removing pasn station for responder

[ Upstream commit ff2687612c21a87a58c76099f3d59f8db376b995 ]

In case of MLD operation the station should be removed using the
mld api.

Fixes: fd940de72d49 ("wifi: iwlwifi: mvm: FTM responder MLO support")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.7eb353abb95c.I2b30be09b99f5a2379956e010bafaa465ff053ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: update station's MFP flag after association

[ Upstream commit 5a86dcb4a908845e6b7ff39b78fb1141b895408f ]

The management frames protection flag is always set when the station
is not yet authorized. However, it was not cleared after association
even if the association did not use MFP. As a result, all public
action frames are not parsed by fw (which will cause FTM to fail,
for example). Update the station MFP flag after the station is
authorized.

Fixes: 4c8d5c8d079e ("wifi: iwlwifi: mvm: tell firmware about per-STA MFP enablement")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.2488cbd01bde.Ic0f08b7d3efcbdce27ec897f84d740fec8d169ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix cookie_init_timestamp() overflows

[ Upstream commit 73ed8e03388d16c12fc577e5c700b58a29045a15 ]

cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.

Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.

Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.

tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.

While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);

Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

chtls: fix tp->rcv_tstamp initialization

[ Upstream commit 225d9ddbacb102621af6d28ff7bf5a0b4ce249d8 ]

tp->rcv_tstamp should be set to tcp_jiffies, not tcp_time_stamp().

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: core: Don't update trip points inside the hysteresis range

[ Upstream commit cf3986f8c01d355490d0ac6024391b989a9d1e9d ]

When searching for the trip points that need to be set, the nearest
higher trip point's temperature is used for the high trip, while the
nearest lower trip point's temperature minus the hysteresis is used for
the low trip. The issue with this logic is that when the current
temperature is inside a trip point's hysteresis range, both high and low
trips will come from the same trip point. As a consequence instability
can still occur like this:
* the temperature rises slightly and enters the hysteresis range of a
  trip point
* polling happens and updates the trip points to the hysteresis range
* the temperature falls slightly, exiting the hysteresis range, crossing
  the trip point and triggering an IRQ, the trip points are updated
* repeat

So even though the current hysteresis implementation prevents
instability from happening due to IRQs triggering on the same
temperature value, both ways, it doesn't prevent it from happening due
to an IRQ on one way and polling on the other.

To properly implement a hysteresis behavior, when inside the hysteresis
range, don't update the trip points. This way, the previously set trip
points will stay in effect, which will in a way remember the previous
state (if the temperature signal came from above or below the range) and
therefore have the right trip point already set.

The exception is if there was no previous trip point set, in which case
a previous state doesn't exist, and so it's sensible to allow the
hysteresis range as trip points.

The following logs show the current behavior when running on a real
machine:

[  202.524658] thermal thermal_zone0: new temperature boundaries: -2147483647 < x < 40000
   203.562817: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37979
[  203.562845] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000
   204.176059: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37979 temp=40028
[  204.176089] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000
   205.226813: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40028 temp=38652
[  205.226842] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000

And with this patch applied:

[  184.933415] thermal thermal_zone0: new temperature boundaries: -2147483647 < x < 40000
   185.981182: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37872
   186.744685: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37872 temp=40058
[  186.744716] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000
   187.773284: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40058 temp=38698

Fixes: 060c034a9741 ("thermal: Add support for hardware-tracked trip points")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Make linked_list failure test more robust

[ Upstream commit da1055b673f3baac2249571c9882ce767a0aa746 ]

The linked list failure test 'pop_front_off' and 'pop_back_off'
currently rely on matching exact instruction and register values.  The
purpose of the test is to ensure the offset is correctly incremented for
the returned pointers from list pop helpers, which can then be used with
container_of to obtain the real object. Hence, somehow obtaining the
information that the offset is 48 will work for us. Make the test more
robust by relying on verifier error string of bpf_spin_lock and remove
dependence on fragile instruction index or register number, which can be
affected by different clang versions used to build the selftests.

Fixes: 300f19dcdb99 ("selftests/bpf: Add BPF linked list API tests")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231020144839.2734006-1-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: skb_find_text: Ignore patterns extending past 'to'

[ Upstream commit c4eee56e14fe001e1cff54f0b438a5e2d0dd7454 ]

Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.

The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.

Test the new behaviour in a kselftest using iptables' string match.

Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcbb8 ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix missed rcu read lock in bpf_task_under_cgroup()

[ Upstream commit 29a7e00ffadddd8d68eff311de1bf12ae10687bb ]

When employed within a sleepable program not under RCU protection, the
use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log,
particularly when CONFIG_PROVE_RCU is enabled:

  [ 1259.662357] WARNING: suspicious RCU usage
  [ 1259.662358] 6.5.0+ #33 Not tainted
  [ 1259.662360] -----------------------------
  [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage!

Other info that might help to debug this:

  [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1
  [ 1259.662368] 1 lock held by trace/72954:
  [ 1259.662369]  #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0

Stack backtrace:

  [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33
  [ 1259.662391] Call Trace:
  [ 1259.662393]  <TASK>
  [ 1259.662395]  dump_stack_lvl+0x6e/0x90
  [ 1259.662401]  dump_stack+0x10/0x20
  [ 1259.662404]  lockdep_rcu_suspicious+0x163/0x1b0
  [ 1259.662412]  task_css_set.part.0+0x23/0x30
  [ 1259.662417]  bpf_task_under_cgroup+0xe7/0xf0
  [ 1259.662422]  bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93
  [ 1259.662431]  bpf_trampoline_6442505574+0x60/0x1000
  [ 1259.662439]  bpf_lsm_bpf+0x5/0x20
  [ 1259.662443]  ? security_bpf+0x32/0x50
  [ 1259.662452]  __sys_bpf+0xe6/0xdd0
  [ 1259.662463]  __x64_sys_bpf+0x1a/0x30
  [ 1259.662467]  do_syscall_64+0x38/0x90
  [ 1259.662472]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
  [ 1259.662479] RIP: 0033:0x7f487baf8e29
  [...]
  [ 1259.662504]  </TASK>

This issue can be reproduced by executing a straightforward program, as
demonstrated below:

SEC("lsm.s/bpf")
int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size)
{
        struct cgroup *cgrp = NULL;
        struct task_struct *task;
        int ret = 0;

        if (cmd != BPF_LINK_CREATE)
                return 0;

        // The cgroup2 should be mounted first
        cgrp = bpf_cgroup_from_id(1);
        if (!cgrp)
                goto out;
        task = bpf_get_current_task_btf();
        if (bpf_task_under_cgroup(task, cgrp))
                ret = -1;
        bpf_cgroup_release(cgrp);

out:
        return ret;
}

After running the program, if you subsequently execute another BPF program,
you will encounter the warning.

It's worth noting that task_under_cgroup_hierarchy() is also utilized by
bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup()
doesn't exhibit this issue because it cannot be used in sleepable BPF
programs.

Fixes: b5ad4cdc46c7 ("bpf: Add bpf_task_under_cgroup() kfunc")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: Feng Zhou <zhoufeng.zf@bytedance.com>
Cc: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20231007135945.4306-1-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/mediatek: Fix probe for THERMAL_V2

[ Upstream commit 5055fadfa7e16f2427d5b3c40b2bf563ddfdab22 ]

Fix the probe function to call mtk_thermal_release_periodic_ts for
everything != MTK_THERMAL_V1. This was accidentally changed from V1
to V2 in the original patch.

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Closes: https://lore.kernel.org/lkml/B0B3775B-B8D1-4284-814F-4F41EC22F532@public-files.de/
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Closes: https://lore.kernel.org/lkml/07a569b9-e691-64ea-dd65-3b49842af33d@linaro.org/
Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: fix rare issue with broken rx after link-down on RTL8125

[ Upstream commit 621735f590643e3048ca2060c285b80551660601 ]

In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Martin Kjær Jørgensen <me@lagy.org>
Link: https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9edde757-9c3b-4730-be3b-0ef3a374ff71@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: core: prevent potential string overflow

[ Upstream commit c99626092efca3061b387043d4a7399bf75fbdd5 ]

The dev->id value comes from ida_alloc() so it's a number between zero
and INT_MAX.  If it's too high then these sprintf()s will overflow.

Fixes: 203d3d4aa482 ("the generic thermal sysfs driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw88: Remove duplicate NULL check before calling usb_kill/free_urb()

[ Upstream commit de8dd096949820ce5656d41ce409a67603e79327 ]

Both usb_kill_urb() and usb_free_urb() do the NULL check itself, so there
is no need to duplicate it prior to calling.

Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231008025852.1239450-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: fix the vq coalescing setting for vq resize

[ Upstream commit f61fe5f081cf40de08d0a4c89659baf23c900f0c ]

According to the definition of virtqueue coalescing spec[1]:

  Upon disabling and re-enabling a transmit virtqueue, the device MUST set
  the coalescing parameters of the virtqueue to those configured through the
  VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver did not set
  any TX coalescing parameters, to 0.

  Upon disabling and re-enabling a receive virtqueue, the device MUST set
  the coalescing parameters of the virtqueue to those configured through the
  VIRTIO_NET_CTRL_NOTF_COAL_RX_SET command, or, if the driver did not set
  any RX coalescing parameters, to 0.

We need to add this setting for vq resize (ethtool -G) where vq_reset happens.

[1] https://lists.oasis-open.org/archives/virtio-dev/202303/msg00415.html

Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: fix per queue coalescing parameter setting

[ Upstream commit bfb2b3609162135625bf96acf5118051cd0d082e ]

When the user sets a non-zero coalescing parameter to 0 for a specific
virtqueue, it does not work as expected, so let's fix this.

Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: consistently save parameters for per-queue

[ Upstream commit e9420838ab4ffb82850095549e94dcee3f7fe0cb ]

When using .set_coalesce interface to set all queue coalescing
parameters, we need to update both per-queue and global save values.

Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: fix mismatch of getting tx-frames

[ Upstream commit 134674c1877be5e35e35802517c67a9ecce21153 ]

Since virtio-net allows switching napi_tx for per txq, we have to
get the specific txq's result now.

Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: Drop pointless memset when dumping rules

[ Upstream commit 30fa41a0f6df4c85790cc6499ddc4a926a113bfa ]

None of the dump callbacks uses netlink_callback::args beyond the first
element, no need to zero the data.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wfx: fix case where rates are out of order

[ Upstream commit ea2274ab0b18549dbf0e755e41d8c5e8b5232dc3 ]

When frames are sent over the air, the device always applies the data
rates in descending order. The driver assumed Minstrel also provided
rate in descending order.

However, in some cases, Minstrel can a choose a fallback rate greater
than the primary rate. In this case, the two rates was inverted, the
device try highest rate first and we get many retries.

Since the device always applies rates in descending order, the
workaround is to drop the rate when it higher than its predecessor in
the rate list. Thus [ 4, 5, 3 ] becomes [ 4, 3 ].

This patch has been tested in isolated room with a series of
attenuators. Here are the Minstrel statistics with 80dBm of attenuation:

  Without the fix:

                  best    ____________rate__________    ____statistics___    _____last____    ______sum-of________
    mode guard #  rate   [name   idx airtime  max_tp]  [avg(tp) avg(prob)]  [retry|suc|att]  [#success | #attempts]
    HT20  LGI  1       S  MCS0     0    1477     5.6       5.2      82.7       3     0 0             3   4
    HT20  LGI  1          MCS1     1     738    10.6       0.0       0.0       0     0 0             0   1
    HT20  LGI  1     D    MCS2     2     492    14.9      13.5      81.5       5     0 0             5   9
    HT20  LGI  1    C     MCS3     3     369    18.8      17.6      84.3       5     0 0            76   96
    HT20  LGI  1  A   P   MCS4     4     246    25.4      22.4      79.5       5     0 0         11268   14026
    HT20  LGI  1   B   S  MCS5     5     185    30.7      19.7      57.7       5     8 9          3918   9793
    HT20  LGI  1          MCS6     6     164    33.0       0.0       0.0       5     0 0             6   102
    HT20  LGI  1          MCS7     7     148    35.1       0.0       0.0       0     0 0             0   44

  With the fix:

                  best    ____________rate__________    ____statistics___    _____last____    ______sum-of________
    mode guard #  rate   [name   idx airtime  max_tp]  [avg(tp) avg(prob)]  [retry|suc|att]  [#success | #attempts]
    HT20  LGI  1       S  MCS0     0    1477     5.6       1.8      28.6       1     0 0             1   5
    HT20  LGI  1     DP   MCS1     1     738    10.6       9.7      82.6       4     0 0            14   34
    HT20  LGI  1          MCS2     2     492    14.9       9.2      55.4       5     0 0            52   77
    HT20  LGI  1   B   S  MCS3     3     369    18.8      15.6      74.9       5     1 1           417   554
    HT20  LGI  1  A       MCS4     4     246    25.4      16.7      59.2       5     1 1         13812   17951
    HT20  LGI  1    C  S  MCS5     5     185    30.7      14.0      41.0       5     1 5            57   640
    HT20  LGI  1          MCS6     6     164    33.0       0.0       0.0       0     0 1             0   48
    HT20  LGI  1       S  MCS7     7     148    35.1       0.0       0.0       0     0 0             0   36

We can notice the device try now to send with lower rates (and high
success rates). At the end, we measured 20-25% better throughput with
this patch.

Fixes: 9bca45f3d692 ("staging: wfx: allow to send 802.11 frames")
Tested-by: Olivier Souloumiac <olivier.souloumiac@silabs.com>
Tested-by: Alexandr Suslenko <suslenko.o@ajax.systems>
Reported-by: Alexandr Suslenko <suslenko.o@ajax.systems>
Co-developed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Felipe Negrelli Wolter <felipe.negrelliwolter@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004123039.157112-1-jerome.pouiller@silabs.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: rockchip-dfi: Make pmu regmap mandatory

[ Upstream commit 1e0731c05c985deb68a97fa44c1adcd3305dda90 ]

As a matter of fact the regmap_pmu already is mandatory because
it is used unconditionally in the driver. Bail out gracefully in
probe() rather than crashing later.

Link: https://lore.kernel.org/lkml/20230704093242.583575-2-s.hauer@pengutronix.de/
Fixes: b9d1262bca0af ("PM / devfreq: event: support rockchip dfi controller")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds

[ Upstream commit 6411959c10fe917288cbb1038886999148560057 ]

If the "struct can_priv::echoo_skb" is accessed out of bounds, this
would cause a kernel crash. Instead, issue a meaningful warning
message and return with an error.

Fixes: a6e4bc530403 ("can: make the number of echo skb's configurable")
Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-5-91b5c1fd922c@pengutronix.de
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()

[ Upstream commit 6841cab8c4504835e4011689cbdb3351dec693fd ]

This race condition was discovered while updating the at91_can driver
to use can_bus_off(). The following scenario describes how the
converted at91_can driver would behave.

When a CAN device goes into BUS-OFF state, the driver usually
stops/resets the CAN device and calls can_bus_off().

This function sets the netif carrier to off, and (if configured by
user space) schedules a delayed work that calls can_restart() to
restart the CAN device.

The can_restart() function first checks if the carrier is off and
triggers an error message if the carrier is OK.

Then it calls the driver's do_set_mode() function to restart the
device, then it sets the netif carrier to on. There is a race window
between these two calls.

The at91 CAN controller (observed on the sama5d3, a single core 32 bit
ARM CPU) has a hardware limitation. If the device goes into bus-off
while sending a CAN frame, there is no way to abort the sending of
this frame. After the controller is enabled again, another attempt is
made to send it.

If the bus is still faulty, the device immediately goes back to the
bus-off state. The driver calls can_bus_off(), the netif carrier is
switched off and another can_restart is scheduled. This occurs within
the race window before the original can_restart() handler marks the
netif carrier as OK. This would cause the 2nd can_restart() to be
called with an OK netif carrier, resulting in an error message.

The flow of the 1st can_restart() looks like this:

can_restart()
    // bail out if netif_carrier is OK

    netif_carrier_ok(dev)
    priv->do_set_mode(dev, CAN_MODE_START)
        // enable CAN controller
        // sama5d3 restarts sending old message

        // CAN devices goes into BUS_OFF, triggers IRQ

// IRQ handler start
    at91_irq()
        at91_irq_err_line()
            can_bus_off()
                netif_carrier_off()
                schedule_delayed_work()
// IRQ handler end

    netif_carrier_on()

The 2nd can_restart() will be called with an OK netif carrier and the
error message will be printed.

To close the race window, first set the netif carrier to on, then
restart the controller. In case the restart fails with an error code,
roll back the netif carrier to off.

Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-2-91b5c1fd922c@pengutronix.de
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: dev: can_restart(): don't crash kernel if carrier is OK

[ Upstream commit fe5c9940dfd8ba0c73672dddb30acd1b7a11d4c7 ]

During testing, I triggered a can_restart() with the netif carrier
being OK [1]. The BUG_ON, which checks if the carrier is OK, results
in a fatal kernel crash. This is neither helpful for debugging nor for
a production system.

[1] The root cause is a race condition in can_restart() which will be
fixed in the next patch.

Do not crash the kernel, issue an error message instead, and continue
restarting the CAN device anyway.

Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-1-91b5c1fd922c@pengutronix.de
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: fix Tx power value during active CAC

[ Upstream commit 77f1ee6fd8b6e470f721d05a2e269039d5cafcb7 ]

Tx power is fetched from firmware's pdev stats. However, during active
CAC, firmware does not fill the current Tx power and sends the max
initialised value filled during firmware init. If host sends this power
to user space, this is wrong since in certain situations, the Tx power
could be greater than the max allowed by the regulatory. Hence, host
should not be fetching the Tx power during an active CAC.

Fix this issue by returning -EAGAIN error so that user space knows that there's
no valid value available.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Fixes: 9a2aa68afe3d ("wifi: ath11k: add get_txpower mac ops")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230912051857.2284-4-quic_adisi@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: break the loop when the budget is exhausted

[ Upstream commit 2cf51f931797d9a47e75d999d0993a68cbd2a560 ]

A bulk transfer of the USB may contain many packets. And, the total
number of the packets in the bulk transfer may be more than budget.

Originally, only budget packets would be handled by napi_gro_receive(),
and the other packets would be queued in the driver for next schedule.

This patch would break the loop about getting next bulk transfer, when
the budget is exhausted. That is, only the current bulk transfer would
be handled, and the other bulk transfers would be queued for next
schedule. Besides, the packets which are more than the budget in the
current bulk trasnfer would be still queued in the driver, as the
original method.

In addition, a bulk transfer wouldn't contain more than 400 packets, so
the check of queue length is unnecessary. Therefore, I replace it with
WARN_ON_ONCE().

Fixes: cf74eb5a5bc8 ("eth: r8152: try to use a normal budget")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230926111714.9448-433-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Define SYS_NANOSLEEP_KPROBE_NAME for riscv

[ Upstream commit b55b775f03166b8da60af80ef33da8bf83ca96c1 ]

Add missing sys_nanosleep name for RISC-V, which is used by some tests
(e.g. attach_probe).

Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-4-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Define SYS_PREFIX for riscv

[ Upstream commit 0f2692ee4324679df6c80ccbb75660564009d187 ]

SYS_PREFIX was missing for a RISC-V, which made a couple of kprobe
tests fail.

Add missing SYS_PREFIX for RISC-V.

Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-3-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix syscall access arguments on riscv

[ Upstream commit 8a412c5c1cd6cc6c55e8b9b84fbb789fc395fe78 ]

Since commit 08d0ce30e0e4 ("riscv: Implement syscall wrappers"), riscv
selects ARCH_HAS_SYSCALL_WRAPPER so let's use the generic implementation
of PT_REGS_SYSCALL_REGS().

Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-2-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: etas_es58x: add missing a blank line after declaration

[ Upstream commit 4f8005092cafc194ba6a8e5f39626ba0b9f08271 ]

Fix below checkpatch warning:

  WARNING: Missing a blank line after declarations
  #2233: FILE: drivers/net/can/usb/etas_es58x/es58x_core.c:2233:
  + int ret = es58x_init_netdev(es58x_dev, ch_idx);
  + if (ret) {

Fixes: d8f26fd689dd ("can: etas_es58x: remove es58x_get_product_info()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230924110914.183898-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: etas_es58x: rework the version check logic to silence -Wformat-truncation

[ Upstream commit 107e6f6fe6f38577baecf0e01f517c8607a3a625 ]

Following [1], es58x_devlink.c now triggers the following
format-truncation GCC warnings:

  drivers/net/can/usb/etas_es58x/es58x_devlink.c: In function ‘es58x_devlink_info_get’:
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:41: warning: ‘%02u’ directive output may be truncated writing between 2 and 3 bytes into a region of size between 1 and 3 [-Wformat-truncation=]
    201 |   snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
        |                                         ^~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:30: note: directive argument in the range [0, 255]
    201 |   snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
        |                              ^~~~~~~~~~~~~~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:3: note: ‘snprintf’ output between 9 and 12 bytes into a destination of size 9
    201 |   snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
        |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    202 |     fw_ver->major, fw_ver->minor, fw_ver->revision);
        |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:41: warning: ‘%02u’ directive output may be truncated writing between 2 and 3 bytes into a region of size between 1 and 3 [-Wformat-truncation=]
    211 |   snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
        |                                         ^~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:30: note: directive argument in the range [0, 255]
    211 |   snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
        |                              ^~~~~~~~~~~~~~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:3: note: ‘snprintf’ output between 9 and 12 bytes into a destination of size 9
    211 |   snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
        |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    212 |     bl_ver->major, bl_ver->minor, bl_ver->revision);
        |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:38: warning: ‘%03u’ directive output may be truncated writing between 3 and 5 bytes into a region of size between 2 and 4 [-Wformat-truncation=]
    221 |   snprintf(buf, sizeof(buf), "%c%03u/%03u",
        |                                      ^~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:30: note: directive argument in the range [0, 65535]
    221 |   snprintf(buf, sizeof(buf), "%c%03u/%03u",
        |                              ^~~~~~~~~~~~~
  drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:3: note: ‘snprintf’ output between 9 and 13 bytes into a destination of size 9
    221 |   snprintf(buf, sizeof(buf), "%c%03u/%03u",
        |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    222 |     hw_rev->letter, hw_rev->major, hw_rev->minor);
        |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is not an actual bug because the sscanf() parsing makes sure that
the u8 are only two digits long and the u16 only three digits long.
Thus below declaration:

char buf[max(sizeof("xx.xx.xx"), sizeof("axxx/xxx"))];

allocates just what is needed to represent either of the versions.

This warning was known but ignored because, at the time of writing,
-Wformat-truncation was not present in the kernel, not even at W=3 [2].

One way to silence this warning is to check the range of all sub
version numbers are valid: [0, 99] for u8 and range [0, 999] for u16.

The module already has a logic which considers that when all the sub
version numbers are zero, the version number is not set. Note that not
having access to the device specification, this was an arbitrary
decision. This logic can thus be removed in favor of global check that
would cover both cases:

  - the version number is not set (parsing failed)
  - the version number is not valid (paranoiac check to please gcc)

Before starting to parse the product info string, set the version
sub-numbers to the maximum unsigned integer thus violating the
definitions of struct es58x_sw_version or struct es58x_hw_revision.

Then, rework the es58x_sw_version_is_set() and
es58x_hw_revision_is_set() functions: remove the check that the
sub-numbers are non zero and replace it by a check that they fit in
the expected number of digits. This done, rename the functions to
reflect the change and rewrite the documentation. While doing so, also
add a description of the return value.

Finally, the previous version only checked that
&es58x_hw_revision.letter was not the null character. Replace this
check by an alphanumeric character check to make sure that we never
return a special character or a non-printable one and update the
documentation of struct es58x_hw_revision accordingly.

All those extra checks are paranoid but have the merit to silence the
newly introduced W=1 format-truncation warning [1].

[1] commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1")
Link: https://git.kernel.org/torvalds/c/6d4ab2e97dcf
[2] https://lore.kernel.org/all/CAMZ6Rq+K+6gbaZ35SOJcR9qQaTJ7KR0jW=XoDKFkobjhj8CHhw@mail.gmail.com/

Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/linux-can/20230914-carrousel-wrecker-720a08e173e9-mkl@pengutronix.de/
Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230924110914.183898-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add acpi_backlight=vendor quirk for Toshiba Portégé R100

[ Upstream commit 35a341c9b25da6a479bd8013bcb11a680a7233e3 ]

Toshiba Portégé R100 has both acpi_video and toshiba_acpi vendor
backlight driver working. But none of them gets activated as it has
a VGA with no kernel driver (Trident CyberBlade XP4m32).

The DMI strings are very generic ("Portable PC") so add a custom
callback function to check for Trident CyberBlade XP4m32 PCI device
before enabling the vendor backlight driver (better than acpi_video
as it has more brightness steps).

Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: property: Allow _DSD buffer data only for byte accessors

[ Upstream commit 046ece773cc77ef5d2a1431b188ac3d0840ed150 ]

In accordance with ACPI specificication and _DSD data buffer
representation the data there is an array of bytes. Hence,
accessing it with something longer will create a sparse data
which is against of how device property APIs work in general
and also not defined in the ACPI specification (see [1]).
Fix the code to emit an error if non-byte accessor is used to
retrieve _DSD buffer data.

Fixes: 369af6bf2c28 ("ACPI: property: Read buffer properties as integers")
Link: https://uefi.org/specs/ACPI/6.5/19_ASL_Reference.html#buffer-declare-buffer-object
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Add missing braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: fix EDCA limit set by BT coexistence

[ Upstream commit 3391ee7f9ea508c375d443cd712c2e699be235b4 ]

In 'rtl92c_dm_check_edca_turbo()', 'rtl88e_dm_check_edca_turbo()',
and 'rtl8723e_dm_check_edca_turbo()', the DL limit should be set
from the corresponding field of 'rtlpriv->btcoexist' rather than
UL. Compile tested only.

Fixes: 0529c6b81761 ("rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek version")
Fixes: c151aed6aa14 ("rtlwifi: rtl8188ee: Update driver to match Realtek release of 06282014")
Fixes: beb5bc402043 ("rtlwifi: rtl8192c-common: Convert common dynamic management routines for addition of rtl8192se and rtl8192de")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230928052327.120178-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: do not create an entry from tcp_init_metrics()

[ Upstream commit a135798e6e200ecb2f864cecca6d257ba278370c ]

tcp_init_metrics() only wants to get metrics if they were
previously stored in the cache. Creating an entry is adding
useless costs, especially when tcp_no_metrics_save is set.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: properly set tp->snd_ssthresh in tcp_init_metrics()

[ Upstream commit 081480014a64a69d901f8ef1ffdd56d6085cf87e ]

We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH
in the case tcp_get_metrics() fails for some reason.

Fixes: 9ad7c049f0f7 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: add missing barriers on delete

[ Upstream commit cbc3a153222805d65f821e10f4f78b6afce06f86 ]

When removing an item from RCU protected list, we must prevent
store-tearing, using rcu_assign_pointer() or WRITE_ONCE().

Fixes: 04f721c671656 ("tcp_metrics: Rewrite tcp_metrics_flush_all")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath: dfs_pattern_detector: Fix a memory initialization issue

[ Upstream commit 79bd60ee87e1136718a686d6617ced5de88ee350 ]

If an error occurs and channel_detector_exit() is called, it relies on
entries of the 'detectors' array to be NULL.
Otherwise, it may access to un-initialized memory.

Fix it and initialize the memory, as what was done before the commit in
Fixes.

Fixes: a063b650ce5d ("ath: dfs_pattern_detector: Avoid open coded arithmetic in memory allocation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/ad8c55b97ee4b330cb053ce2c448123c309cc91c.1695538105.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921: fix the wrong rate selected in fw for the chanctx driver

[ Upstream commit c558d22e7a93affeb18aae1dcd777ddd1ad18da1 ]

The variable band should be determined by the ieee80211_chanctx_conf when
the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we
added the extension to mt76_connac2_mac_tx_rate_val and
mt76_connac_get_he_phy_cap for the firmware can select the proper rate.

Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: David Ruth <druth@chromium.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driver

[ Upstream commit 32b1000db221df33ec8b57794a091ba6075b6c28 ]

The variable band should be determined by the ieee80211_chanctx_conf when
the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we
added the extension to mt76_connac2_mac_tx_rate_val by distinguishing if
it can support chanctx to fix the incorrect rate pickup.

Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: David Ruth <druth@chromium.org>
Tested-by: David Ruth <druth@chromium.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: move struct ieee80211_chanctx_conf up to struct mt76_vif

[ Upstream commit f50206555992abb802cee4e3f951d1ea669cb8bc ]

Move struct ieee80211_chanctx_conf up to struct mt76_vif to allow the
connac2 library can access the struct ieee80211_chanctx_conf * member in
struct mt76_vif.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: David Ruth <druth@chromium.org>
Tested-by: David Ruth <druth@chromium.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 32b1000db221 ("wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7915: fix beamforming availability check

[ Upstream commit ced1a0b8f3944e44e7f4eb3772dea1bada25d38a ]

Without this patch, when ap sets the tx stream number to 2,
ap won't send any beamforming packet.

Fixes: f89f297aef28 ("mt76: mt7915: fix txbf starec TLV issues")
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparison

[ Upstream commit c685034cabc574dbdf16fa675010e202083cb4c2 ]

Use the correct ieee80211_conf of each band for IEEE80211_CONF_MONITOR
comparison.

Fixes: 24e69f6bc3ca ("mt76: fix monitor rx FCS error in DFS channel")
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: get rid of false alamrs of tx emission issues

[ Upstream commit 413f05d68d11981f5984b49214d3a5a0d88079b1 ]

When the set_chan_info command is set with CH_SWITCH_NORMAL reason,
even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some
unexpected tones, which might confuse DFS CAC tests that there are some
tone leakages. To get rid of these kinds of false alarms, always bypass
DPD calibration when IEEE80211_CONF_IDLE is set.

Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: c685034cabc5 ("wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparison")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: fix potential memory leak of beacon commands

[ Upstream commit d6a2f91741d9f43b31cb16c82da37f35117a6d1c ]

Fix potential memory leak when setting beacon and inband discovery
commands.

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: update beacon size limitation

[ Upstream commit de869f81f994c4a4dea0d70921ac5ab78858b224 ]

To accommodate 11v MBSSID IE and support maximum 16 MBSSIDs, expand the
beacon size limitation for beacon and inband discovery commands.

Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: d6a2f91741d9 ("wifi: mt76: fix potential memory leak of beacon commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7996: fix TWT command format

[ Upstream commit 84f313b7392f6501f05d8981105d79859b1252cb ]

Align the command format of UNI_CMD_TWT_ARGT_UPDATE to firmware.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7996: fix rx rate report for CBW320-2

[ Upstream commit 0197923ecf5eb4dbd785f5576040d49611f591a4 ]

RX vector reports channel bandwidth 320-1 and 320-2 with different
values. Fix it to correctly report rx rate when using CBW320-2.

Fixes: 80f5a31d2856 ("wifi: mt76: mt7996: add support for EHT rate report")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7996: fix wmm queue mapping

[ Upstream commit 9b11696e5c5bf6030a32571f3f88845226d8b662 ]

Firmware uses access class index (ACI) for wmm parameters update, so
convert mac80211 queue to ACI in mt7996_conf_tx().

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7996: fix beamformee ss subfield in EHT PHY cap

[ Upstream commit e19028104b2de5510b43282f632c4b6453568c41 ]

According to P802.11be_D3.2 Table 9-404m, the minimum value of
Beamformee SS field shall be 3. Fix the values to follow the spec.

Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>