Kumar Gala [Wed, 20 Feb 2008 04:03:47 +0000 (22:03 -0600)]
[new uImage] ppc: Allow boards to specify effective amount of memory
For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS. However newer boards are capable of
mapping more memory (for example 85xx is capable of doing up to 2G).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
Kumar Gala [Thu, 28 Feb 2008 03:51:46 +0000 (21:51 -0600)]
[new uImage] rework error handling so common functions don't reset
Changed image_get_ramdisk() to just return NULL on error and have
get_ramdisk() propogate that error to the caller. It's left to the
caller to call do_reset() if it wants to.
Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
to a common location. In the future we will change get_fdt() and
fdt_relocate() to return success/failure and not call do_reset() at all.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
Kumar Gala [Thu, 28 Feb 2008 03:51:45 +0000 (21:51 -0600)]
[new uImage] ppc: Re-order ramdisk/fdt handling sequence
Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
however it does mean we have to go in and fixup the initrd info since
we don't know where it will be.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 28 Feb 2008 03:51:44 +0000 (21:51 -0600)]
[new uImage] ppc: Determine if we are booting an OF style
If we are bootin OF style than we can skip setting up some things
that are used for the old boot method.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
Kumar Gala [Thu, 28 Feb 2008 03:51:43 +0000 (21:51 -0600)]
[new uImage] Don't pass kdb to ramdisk_high since we may not have one
We don't actually need the kdb param as we are just using it to get
bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
boot via OF we might not actually fill out a kdb.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Wed, 27 Feb 2008 10:02:26 +0000 (11:02 +0100)]
[new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
Dual format image code must properly handle all three FDT passing methods:
- raw FDT blob passed
- FDT blob embedded in the legacy uImage
- FDT blob embedded in the new uImage
This patch enables proper raw FDT handling when no FIT imaeg support
is compiled in. This is a bit tricky as we must dected FIT format even
when FIT uImage handling is not enabled as both FIT uImages and raw FDT
blobs use tha same low level format (libfdt).
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Wed, 27 Feb 2008 10:02:26 +0000 (11:02 +0100)]
[new uImage] POWERPC: Add image_get_fdt() routine
FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
(3) or embedded in the new uImage. For the (2) case embedding image must be
verified before we get FDT from it. This patch factors out legacy image
specific verification routine to the separate helper routine.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Marian Balakowicz [Wed, 27 Feb 2008 10:02:07 +0000 (11:02 +0100)]
[new uImage] Add image_get_kernel() routine
Legacy image specific verification is factored out to a separate helper
routine to keep get_kernel() generic and simple.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Marian Balakowicz [Wed, 27 Feb 2008 10:01:04 +0000 (11:01 +0100)]
[new uImage] Move image verify flag to bootm_headers structure
Do not pass image verification flag directly to related routines.
Simplify argument passing and move it to the bootm_header structure which
contains curently processed image specific data and is already being passed
on the argument list.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Marian Balakowicz [Wed, 27 Feb 2008 10:00:47 +0000 (11:00 +0100)]
[Makefile] Sort COBJS in lib_<arch> Makefiles
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Wed, 27 Feb 2008 10:00:47 +0000 (11:00 +0100)]
[new uImage] Optimize gen_get_image() flow control
When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
to do, update its control flow to better reflect that simple case.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Marian Balakowicz [Mon, 4 Feb 2008 07:28:17 +0000 (08:28 +0100)]
[new uImage] POWERPC: Split get_fdt() into get and relocate routines
PPC specific FDT blob handling code is divided into two separate routines:
get_fdt() - find and verify a FDT blob (either raw or image embedded)
fdt_relocate() - move FDT blob to within BOOTMAP if needed
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Marian Balakowicz [Mon, 4 Feb 2008 07:28:09 +0000 (08:28 +0100)]
[new uImage] Add dual format uImage support framework
This patch adds framework for dual format images. Format detection is added
and the bootm controll flow is updated to include cases for new FIT format
uImages.
When the legacy (image_header based) format is detected appropriate
legacy specific handling is invoked. For the new (FIT based) format uImages
dual boot framework has a minial support, that will only print out a
corresponding debug messages. Implementation of the FIT specific handling will
be added in following patches.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Thu, 21 Feb 2008 16:27:49 +0000 (17:27 +0100)]
[new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Thu, 21 Feb 2008 16:27:41 +0000 (17:27 +0100)]
[new uImage] Rename and move print_image_hdr() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Thu, 21 Feb 2008 16:20:20 +0000 (17:20 +0100)]
[new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
Introducing routines for parsing new uImage format bootm arguments:
[<addr>]#<conf> - configuration specification
[<addr>]:<subimg> - subimage specification
New format images can contain multiple subimages of the same type. For example
a single new format image file can contain three kernels, two ramdisks and a
couple of FDT blobs. Subimage and configuration specifications are extensions
to bootm (and other image-related commands) arguments' syntax that allow to
specify which particular subimage should be operated on.
Subimage specification is used to denote a particular subimage. Configurations
are a bit more complex -- they are used to define a particualr booting setup,
for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
etc.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Thu, 21 Feb 2008 16:20:19 +0000 (17:20 +0100)]
[new uImage] Add gen_get_image() routine
This routine assures that image (whether legacy or FIT) is not
in a special dataflash storage.
If image address is a dataflash address image is moved to system RAM.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Thu, 21 Feb 2008 16:20:18 +0000 (17:20 +0100)]
[new uImage] Pull in libfdt if CONFIG_FIT is enabled
New uImage format (Flattened Image Tree) requires libfdt
functionality, print out error message if CONFIG_OF_LIBFDT
is not defined.
New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
This commit turns it on by default.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Marian Balakowicz [Thu, 21 Feb 2008 16:18:01 +0000 (17:18 +0100)]
Merge branch 'master' of /home/git/u-boot
Yuri Tikhonov [Thu, 21 Feb 2008 10:06:07 +0000 (11:06 +0100)]
Fix CPU POST test failure
The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
This patch just saves the CR value before running the test code, so allowing
it to do anything it wants with CR.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Acked-by: Yuri Tikhonov <yur@emcraft.com>
--
Jean-Christophe PLAGNIOL-VILLARD [Sun, 17 Feb 2008 13:15:31 +0000 (14:15 +0100)]
s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 17 Feb 2008 13:15:32 +0000 (14:15 +0100)]
pxa: fix assignment from incompatible pointer type
fix mmc_bread function prototype
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 17 Feb 2008 13:15:30 +0000 (14:15 +0100)]
at91cap9adk: fix implicit declaration of function 'eth_init'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Sun, 17 Feb 2008 14:43:44 +0000 (15:43 +0100)]
Remove files added by mistake, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Nuss [Wed, 6 Feb 2008 16:10:11 +0000 (11:10 -0500)]
PPC440EPx: Optionally enable second I2C bus
The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
Signed-off-by: Mike Nuss <mike@terascala.com>
Cc: Stefan Roese <sr@denx.de>
Niklaus Giger [Tue, 5 Feb 2008 09:26:44 +0000 (10:26 +0100)]
ppc4xx: HCU4/5. Cleanup configs
- hcu4.h: Removed define of CONFIG_PPC405GPr
- Corrected phy addresses
- Fix boot variables
- Respect line length of 80 chars
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Tue, 5 Feb 2008 10:31:28 +0000 (11:31 +0100)]
ppc4xx: HCU4/5. Cleanups
- Fix some coding style violations.
- Use in/out_u16/32 where appropriate.
- Use register names from ppc405.h.
- Fix trace useage for Lauterbach.
- Remove obsolete generation HCU2.
- Renamed fixed_hcu4_sdram to init_ppc405_sdram.
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Tue, 5 Feb 2008 09:26:41 +0000 (10:26 +0100)]
ppc4xx: PPC405GPr fix missing register definitions
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Larry Johnson [Sat, 19 Jan 2008 02:49:05 +0000 (21:49 -0500)]
ppc4xx: Beautify configuration files for Sequoia and Korat boards
Signed-off-by: Larry Johnson <lrj@acm.org>
Wolfgang Denk [Fri, 15 Feb 2008 23:42:44 +0000 (00:42 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-arm
Anatolij Gustschin [Fri, 15 Feb 2008 19:09:01 +0000 (20:09 +0100)]
Wipe out assembler warnings while compiling x86 biosemu
This patch tries to get rid of some assembler warnings about
changed .got2 section type while compiling x86 bios emulator
code.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Peter Pearse [Fri, 15 Feb 2008 13:00:54 +0000 (13:00 +0000)]
Merge branch '080208_dupint' of git://linux-arm.org/u-boot-armdev
Peter Pearse [Fri, 15 Feb 2008 13:00:22 +0000 (13:00 +0000)]
Merge branch '080202_at91rm9200dk' of git://linux-arm.org/u-boot-armdev
Peter Pearse [Fri, 15 Feb 2008 12:59:56 +0000 (12:59 +0000)]
Merge branch '080131_artila' of git://linux-arm.org/u-boot-armdev
Peter Pearse [Fri, 15 Feb 2008 12:59:15 +0000 (12:59 +0000)]
Merge branch '080116_at91cap9' of git://linux-arm.org/u-boot-armdev
Peter Pearse [Fri, 15 Feb 2008 12:58:10 +0000 (12:58 +0000)]
Merge branch '070524_netstar' of git://linux-arm.org/u-boot-armdev
Wolfgang Denk [Thu, 14 Feb 2008 23:59:03 +0000 (00:59 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Wolfgang Denk [Thu, 14 Feb 2008 23:57:09 +0000 (00:57 +0100)]
Prepare v1.3.2-rc1 release candidate
Anatolij Gustschin [Thu, 14 Feb 2008 23:13:20 +0000 (00:13 +0100)]
Fix compile warning on lib_ppc/board.c
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Thu, 14 Feb 2008 17:22:04 +0000 (18:22 +0100)]
Add Radeon Mobility 9200 pci device id to the radeon driver
This patch extends PCI device id table of the
radeon driver so that the driver will also support
Radeon Mobility 9200 (M9+) based boards.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Thu, 14 Feb 2008 17:19:50 +0000 (18:19 +0100)]
Extend ATI Radeon driver to support more video modes
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 10 Feb 2008 16:05:20 +0000 (17:05 +0100)]
xsengine: fix typo and few coding style
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Guennadi Liakhovetski [Fri, 8 Feb 2008 20:25:58 +0000 (21:25 +0100)]
Fix wrong memory limit calculation in memory-test
If the length of the memory address range passed to the "mtest" command is
not of the form 2^x - 1, not all address lines are tested. This bug is
inherited from the original software at
http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
this.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Wolfgang Denk [Thu, 14 Feb 2008 23:45:39 +0000 (00:45 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-arm
Wolfgang Denk [Thu, 14 Feb 2008 23:27:11 +0000 (00:27 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:26:52 +0000 (00:26 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Conflicts:
common/cmd_reginfo.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 14 Feb 2008 23:22:49 +0000 (00:22 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:22:37 +0000 (00:22 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Wolfgang Denk [Thu, 14 Feb 2008 23:16:32 +0000 (00:16 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:16:26 +0000 (00:16 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-sh
Wolfgang Denk [Thu, 14 Feb 2008 23:14:36 +0000 (00:14 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:14:26 +0000 (00:14 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-avr32
Wolfgang Denk [Thu, 14 Feb 2008 23:13:09 +0000 (00:13 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:12:52 +0000 (00:12 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Wolfgang Denk [Thu, 14 Feb 2008 23:11:39 +0000 (00:11 +0100)]
Coding STyle cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 14 Feb 2008 23:06:18 +0000 (00:06 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-blackfin
Conflicts:
Makefile
doc/README.standalone
Signed-off-by: Wolfgang Denk <wd@denx.de>
Nobuhiro Iwamatsu [Tue, 5 Feb 2008 04:30:43 +0000 (13:30 +0900)]
sh: Fix register address of SH7722
The address of SH7722 is wrong by old document.
This patch fixes this problem.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Mike Frysinger [Mon, 4 Feb 2008 22:44:23 +0000 (17:44 -0500)]
only update version header as needed
Constantly rebuilding the version header will force useless relinking, so we
simply need to compare the new header with the existing one before updating
it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 28 Jan 2008 10:56:19 +0000 (05:56 -0500)]
Do not specify a CROSS_COMPILE default when executing size
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Guennadi Liakhovetski [Wed, 13 Feb 2008 10:19:19 +0000 (11:19 +0100)]
Fix return value of mtest when CFG_ALT_MEMTEST set
Fix a missing return statement from a non-void function.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Timur Tabi [Wed, 9 Jan 2008 20:35:26 +0000 (14:35 -0600)]
85xx, 86xx: Determine I2C clock frequencies and store in global_data
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
Update the get_clocks() function in 85xx and 86xx to determine the I2C
clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
Signed-off-by: Timur Tabi <timur@freescale.com>
Wolfgang Denk [Thu, 14 Feb 2008 22:18:01 +0000 (23:18 +0100)]
TQM834x: clean up configuration
Get board name consistent with Linux and elsewhere;
get rid of local network definitions etc.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 14 Feb 2008 07:02:12 +0000 (08:02 +0100)]
TFTP: fix search of ':' in BootFile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Thu, 14 Feb 2008 21:46:55 +0000 (22:46 +0100)]
Coding style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 14 Feb 2008 21:43:22 +0000 (22:43 +0100)]
PPC: Use r2 instead of r29 as global data pointer
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.
Use r2 instead.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Uwe Kleine-König [Wed, 30 Jan 2008 08:08:49 +0000 (09:08 +0100)]
ARM: make the machid configurable via the environment
If the variable "machid" exists, let do_bootm_linux use that instead
of bd->bi_arch_number.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Vlad Lungu [Wed, 23 Jan 2008 14:34:46 +0000 (16:34 +0200)]
Use #ifdef CONFIG_FSLDMAFEC
MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
fails
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Shinya Kuribayashi [Sat, 19 Jan 2008 01:25:59 +0000 (10:25 +0900)]
common/miiphyutil.c: Cleanup MII_DEBUG and debug()
Current MII_DEBUG is confusing in two ways. One is useless define-then-
undef at the top of the file. The other is there is only one debug() in
this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
While there are many useful printf()/puts() debug codes, but they are for
DEBUG, not for MII_DEBUG.
This patch tries to put them all together into MII_DEBUG and debug().
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Kyungmin Park [Thu, 17 Jan 2008 07:43:25 +0000 (16:43 +0900)]
OneNAND Initial Program Loader (IPL) support
This patch enables the OneNAND boot within U-Boot.
Before this work, we used another OneNAND IPL called X-Loader based
on open source. With this work, we can build the oneboot.bin image
without other program.
The build sequence is simple.
First, it compiles the u-boot.bin
Second, it compiles OneNAND IPL
Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
The mechanism is similar with NAND boot except it boots from itself.
Another thing is that you can only use the OneNAND IPL only to work
other bootloader such as RedBoot and so on.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Andy Fleming [Wed, 16 Jan 2008 19:06:59 +0000 (13:06 -0600)]
Fix CONFIG_MMC usage in fat code
A #if statement in fat.c depended on CONFIG_MMC, instead of
defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
as "1" rather than just defined. Now it's better.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Rafal Jaworowski [Tue, 15 Jan 2008 11:52:31 +0000 (12:52 +0100)]
ppc: Refactor cache routines, so there is only one common set.
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Jon Loeliger [Thu, 14 Feb 2008 20:07:21 +0000 (14:07 -0600)]
Merge commit 'wd/master'
Jon Loeliger [Wed, 23 Jan 2008 21:55:02 +0000 (15:55 -0600)]
86xx: Fix compilation warning in sys_eprom.c
sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Andy Fleming [Thu, 14 Feb 2008 16:11:14 +0000 (10:11 -0600)]
Merge branch 'denx'
Stefan Roese [Thu, 14 Feb 2008 10:46:07 +0000 (11:46 +0100)]
Merge branch 'for-1.3.2'
Haavard Skinnemoen [Fri, 22 Feb 2008 11:40:50 +0000 (11:40 +0000)]
Move AT91RM9200DK board support under board/atmel
We already have a vendor subdir for Atmel, so we should use it.
Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
Andreas Engel [Mon, 14 Jan 2008 09:06:52 +0000 (09:06 +0000)]
ARM: cleanup duplicated exception handlingcode
Move duplicated exception handling code into lib_arm.
Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
Timo Tuunainen [Fri, 1 Feb 2008 10:09:03 +0000 (10:09 +0000)]
Support for Artila M-501 starter kit
Kimmo Leppala / Sysart and
Timo Tuunainen / Sysart
Stelian Pop [Mon, 11 Feb 2008 10:50:19 +0000 (10:50 +0000)]
AT91CAP9 support
---------------------------------
read_dataflash() takes a signed char pointer as a parameter. Silence a
few warnings dues to incorrect parameter types in env_dataflash.c.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Thu, 7 Feb 2008 09:42:57 +0000 (09:42 +0000)]
AT91CAP9 support : move board files to Atmel vendor directory.
AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Thu, 3 Jan 2008 21:15:56 +0000 (21:15 +0000)]
AT91CAP9 support : MACB changes
Signed-off-by: Stelian Pop <stelian <at> popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
Stelian Pop [Thu, 7 Feb 2008 16:37:54 +0000 (16:37 +0000)]
AT91CAP9 support : board/ files
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 30 Jan 2008 21:15:54 +0000 (21:15 +0000)]
AT91CAP9 support : cpu/ files
Signed-off-by: Stelian Pop <stelian <at> popies.net>
Stelian Pop [Thu, 31 Jan 2008 21:15:53 +0000 (21:15 +0000)]
AT91CAP9 support : include/ files
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Sun, 20 Jan 2008 19:49:21 +0000 (19:49 +0000)]
AT91CAP9 support : build integration
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Sun, 20 Jan 2008 21:07:00 +0000 (21:07 +0000)]
Improve DataFlash CS definition.
Use a structure instead of the error prone unnamed array to
define the possible dataflash banks.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Sat, 19 Jan 2008 21:09:35 +0000 (21:09 +0000)]
Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
cpu/arm926ejs/start.o: In function `cpu_init_crit':
.../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
Signed-off-by: Stelian Pop <stelian@popies.net>
Peter Pearse [Fri, 1 Feb 2008 16:50:24 +0000 (16:50 +0000)]
Fix timer overflow in DaVinci
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Peter Pearse [Fri, 1 Feb 2008 16:49:08 +0000 (16:49 +0000)]
Update board NetStar
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Niklaus Giger [Tue, 5 Feb 2008 09:26:42 +0000 (10:26 +0100)]
ppc4xx: HCU4/5. Fix make O=../xx
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Larry Johnson [Tue, 22 Jan 2008 13:51:59 +0000 (08:51 -0500)]
ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
Signed-off-by: Larry Johnson <lrj@acm.org>
Andy Fleming [Thu, 14 Feb 2008 00:36:27 +0000 (18:36 -0600)]
Merge branch 'denx'
Hiroshi Ito [Thu, 31 Jan 2008 09:35:04 +0000 (18:35 +0900)]
NFS Timeout with large files.
Retry to send NFS packet before reaching timeout.
Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
Johannes Stezenbach [Mon, 28 Jan 2008 23:11:25 +0000 (00:11 +0100)]
Add dependencies to avoid race conditions with parallel make.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Mike Frysinger [Mon, 28 Jan 2008 10:46:01 +0000 (05:46 -0500)]
Mark board_init_[fr] as noreturn
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 28 Jan 2008 10:28:50 +0000 (05:28 -0500)]
Only use TEXT_BASE if defined by the board
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 25 Jan 2008 06:54:47 +0000 (07:54 +0100)]
Fix remaining CONFIG_COMMANDS
update comments
Fix coding style
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Niklaus Giger [Mon, 21 Jan 2008 15:46:00 +0000 (16:46 +0100)]
Add *~ to .gitignore
One should never add a backup file ending in with ~ to the git repository.
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Kumar Gala [Thu, 17 Jan 2008 06:02:10 +0000 (00:02 -0600)]
Remove duplicate defines for ARRAY_SIZE
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Stelian Pop [Mon, 14 Jan 2008 21:08:14 +0000 (22:08 +0100)]
Fix incorrect address test in AT91F_DataflashSelect().
Signed-off-by: Stelian Pop <stelian@popies.net>