review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'trace-v6.0-rc4' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Do not stop trace events in modules if TAINT_TEST is set

- Do not clobber mount options when tracefs is mounted a second time

- Prevent crash of kprobes in gate area

- Add static annotation to some non global functions

- Add some entries into the MAINTAINERS file

- Fix check of event_mutex held when accessing trigger list

- Add some __init/__exit annotations

- Fix reporting of what called hardirq_{enable,disable}_ip function

* tag 'trace-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracefs: Only clobber mode/uid/gid on remount if asked
  kprobes: Prohibit probes in gate area
  rv/reactor: add __init/__exit annotations to module init/exit funcs
  tracing: Fix to check event_mutex is held while accessing trigger list
  tracing: hold caller_addr to hardirq_{enable,disable}_ip
  tracepoint: Allow trace events in modules with TAINT_TEST
  MAINTAINERS: add scripts/tracing/ to TRACING
  MAINTAINERS: Add Runtime Verification (RV) entry
  rv/monitors: Make monitor's automata definition static

Merge tag 'asm-generic-fixes-6.0-rc4' of git://git./linux/kernel/git/arnd/asm-generic

Pull SOFTIRQ_ON_OWN_STACK rework from Arnd Bergmann:
"Just one fixup patch, reworking the softirq_on_own_stack logic for
  preempt-rt kernels as discussed in

    https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/"

* tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.

tracefs: Only clobber mode/uid/gid on remount if asked

Users may have explicitly configured their tracefs permissions; we
shouldn't overwrite those just because a second mount appeared.

Only clobber if the options were provided at mount time.

Note: the previous behavior was especially surprising in the presence of
automounted /sys/kernel/debug/tracing/.

Existing behavior:

  ## Pre-existing status: tracefs is 0755.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

  ## (Re)trigger the automount.
  # umount /sys/kernel/debug/tracing
  # stat -c '%A' /sys/kernel/debug/tracing/.
  drwx------

  ## Unexpected: the automount changed mode for other mount instances.
  # stat -c '%A' /sys/kernel/tracing/
  drwx------

New behavior (after this change):

  ## Pre-existing status: tracefs is 0755.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

  ## (Re)trigger the automount.
  # umount /sys/kernel/debug/tracing
  # stat -c '%A' /sys/kernel/debug/tracing/.
  drwxr-xr-x

  ## Expected: the automount does not change other mount instances.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb7226790d44406@changeid
Cc: stable@vger.kernel.org
Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

kprobes: Prohibit probes in gate area

The system call gate area counts as kernel text but trying
to install a kprobe in this area fails with an Oops later on.
To fix this explicitly disallow the gate area for kprobes.

Found by syzkaller with the following reproducer:
perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0)

Sample report:
BUG: unable to handle page fault for address: fffffbfff3ac6000
PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
insn_get_prefixes arch/x86/lib/insn.c:131 [inline]
insn_get_opcode arch/x86/lib/insn.c:272 [inline]
insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343
insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421
insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464
insn_get_immediate arch/x86/lib/insn.c:632 [inline]
insn_get_length arch/x86/lib/insn.c:707 [inline]
insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747
can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282
arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739
prepare_kprobe kernel/kprobes.c:1160 [inline]
register_kprobe kernel/kprobes.c:1641 [inline]
register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603
__register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline]
__register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477
create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833
perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271
perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888
perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261
perf_init_event kernel/events/core.c:11325 [inline]
perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619
perf_event_alloc kernel/events/core.c:12059 [inline]
__do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f63ef7efaed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0
RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000
</TASK>
Modules linked in:
CR2: fffffbfff3ac6000
---[ end trace 0000000000000000 ]---
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
==================================================================

Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de
cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'spi-fix-v6.0-rc4' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"Several fixes that came in since the merge window, the major one being
  a fix for the spi-mux driver which was broken by the performance
  optimisations due to it peering inside the core's data structures more
  than it should"

* tag 'spi-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi: Fix queue hang if previous transfer failed
  spi: mux: Fix mux interaction with fast path optimisations
  spi: cadence-quadspi: Disable irqs during indirect reads
  spi: bitbang: Fix lsb-first Rx

Merge tag 'regulator-fix-v6.0-rc4' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"One core fix here improving the error handling on enable failure, plus
  smaller fixes for the pfuze100 drive and the SPMI DT bindings"

* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix qcom,spmi-regulator schema
  regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
  regulator: core: Clean up on enable failure

Merge tag 'regmap-fix-v6.0-rc4' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"A fix for how we handle controller constraints on SPI message sizes,
  only impacting systems with SPI controllers with very low limits like
  the AMD controller used in the Steam Deck"

* tag 'regmap-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: spi: Reserve space for register address/padding

Merge tag 'net-6.0-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
  subtrees.

  Current release - regressions:

   - skb: export skb drop reaons to user by TRACE_DEFINE_ENUM

   - bluetooth: fix regression preventing ACL packet transmission

  Current release - new code bugs:

   - dsa: microchip: fix kernel oops on ksz8 switches

   - dsa: qca8k: fix NULL pointer dereference for
     of_device_get_match_data

  Previous releases - regressions:

   - netfilter: clean up hook list when offload flags check fails

   - wifi: mt76: fix crash in chip reset fail

   - rxrpc: fix ICMP/ICMP6 error handling

   - ice: fix DMA mappings leak

   - i40e: fix kernel crash during module removal

  Previous releases - always broken:

   - ipv6: sr: fix out-of-bounds read when setting HMAC data.

   - tcp: TX zerocopy should not sense pfmemalloc status

   - sch_sfb: don't assume the skb is still around after
     enqueueing to child

   - netfilter: drop dst references before setting

   - wifi: wilc1000: fix DMA on stack objects

   - rxrpc: fix an insufficiently large sglist in
     rxkad_verify_packet_2()

   - fec: use a spinlock to guard `fep->ptp_clk_on`

  Misc:

   - usb: qmi_wwan: add Quectel RM520N"

* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  sch_sfb: Also store skb len before calling child enqueue
  net: phy: lan87xx: change interrupt src of link_up to comm_ready
  net/smc: Fix possible access to freed memory in link clear
  net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
  net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
  net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
  net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
  net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
  net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
  net: usb: qmi_wwan: add Quectel RM520N
  net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
  tcp: fix early ETIMEDOUT after spurious non-SACK RTO
  stmmac: intel: Simplify intel_eth_pci_remove()
  net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
  ipv6: sr: fix out-of-bounds read when setting HMAC data.
  bonding: accept unsolicited NA message
  bonding: add all node mcast address when slave up
  bonding: use unspecified address if no available link local address
  wifi: use struct_group to copy addresses
  wifi: mac80211_hwsim: check length for virtio packets
  ...

fs: only do a memory barrier for the first set_buffer_uptodate()

Commit d4252071b97d ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.

However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.

That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.

Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock).  A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.

Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads.  In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:

  fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression

although you presumably need a fast disk and a lot of cores to actually
notice.

Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'efi-urgent-for-v6.0-1' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:
"A couple of low-priority EFI fixes:

   - prevent the randstruct plugin from re-ordering EFI protocol
     definitions

   - fix a use-after-free in the capsule loader

   - drop unused variable"

* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: capsule-loader: Fix use-after-free in efi_capsule_write
  efi/x86: libstub: remove unused variable
  efi: libstub: Disable struct randomization

sch_sfb: Also store skb len before calling child enqueue

Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.

Fixes: 9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phy: lan87xx: change interrupt src of link_up to comm_ready

Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down. Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.

Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

efi: capsule-loader: Fix use-after-free in efi_capsule_write

A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.

This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.

So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().

Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

net/smc: Fix possible access to freed memory in link clear

After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.

Here is a crash example:

BUG: unable to handle page fault for address: ffffffff8f220860
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S         OE     5.10.0-0607+ #23
Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086
RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000
RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00
RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b
R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010
R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040
FS:  0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  <IRQ>
  _raw_spin_lock_irqsave+0x30/0x40
  mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
  smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
  tasklet_action_common.isra.21+0x66/0x100
  __do_softirq+0xd5/0x29c
  asm_call_irq_on_stack+0x12/0x20
  </IRQ>
  do_softirq_own_stack+0x37/0x40
  irq_exit_rcu+0x9d/0xa0
  sysvec_call_function_single+0x34/0x80
  asm_sysvec_call_function_single+0x12/0x20

Fixes: bd4ad57718cc ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb

Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine

Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM

As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:

$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
  ip_defrag 14605 [021]   221.614303:   skb:kfree_skb:
  skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
  reason:

The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.

Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit ec43908dd556
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.

Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.

After this commit, now the format of kfree_skb is like this:

$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:void * skbaddr;   offset:8;       size:8; signed:0;
        field:void * location;  offset:16;      size:8; signed:0;
        field:unsigned short protocol;  offset:24;      size:2; signed:0;
        field:enum skb_drop_reason reason;      offset:28;      size:4; signed:0;

print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......

Fixes: ec43908dd556 ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear

Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.

Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dsa-felix-fixes'

Vladimir Oltean says:

====================
Fixes for Felix DSA driver calculation of tc-taprio guard bands

This series fixes some bugs which are not quite new, but date from v5.13
when static guard bands were enabled by Michael Walle to prevent
tc-taprio overruns.

The investigation started when Xiaoliang asked privately what is the
expected max SDU for a traffic class when its minimum gate interval is
10 us. The answer, as it turns out, is not an L1 size of 1250 octets,
but 1245 octets, since otherwise, the switch will not consider frames
for egress scheduling, because the static guard band is exactly as large
as the time interval. The switch needs a minimum of 33 ns outside of the
guard band to consider a frame for scheduling, and the reduction of the
max SDU by 5 provides exactly for that.

The fix for that (patch 1/3) is relatively small, but during testing, it
became apparent that cut-through forwarding prevents oversized frame
dropping from working properly. This is solved through the larger patch
2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found
through code inspection.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set

The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set()
runs unlocked with respect to the other functions that access it, which
are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and
vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock,
so move the vsc9959_sched_speed_set() access under that lock as well, to
resolve the concurrency.

Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio

Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605,
frames even way larger than 601 octets are transmitted even though these
should be considered as oversized, according to the documentation, and
dropped.

Since oversized frame dropping depends on frame size, which is only
known at the EOF stage, and therefore not at SOF when cut-through
forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_*
into consideration for traffic classes that are cut-through.

Since cut-through forwarding has no UAPI to control it, and the driver
enables it based on the mantra "if we can, then why not", the strategy
is to alter vsc9959_cut_through_fwd() to take into consideration which
tc's have oversize frame dropping enabled, and disable cut-through for
them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the
cut-through determination process.

There are 2 strategies for vsc9959_cut_through_fwd() to determine
whether a tc has oversized dropping enabled or not. One is to keep a bit
mask of traffic classes per port, and the other is to read back from the
hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the
feature is enabled). We choose reading back from registers, because
struct ocelot_port is shared with drivers (ocelot, seville) that don't
support either cut-through nor tc-taprio, and we don't have a felix
specific extension of struct ocelot_port. Furthermore, reading registers
from the Felix hardware is quite cheap, since they are memory-mapped.

Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet

The blamed commit broke tc-taprio schedules such as this one:

tc qdisc replace dev $swp1 root taprio \
        num_tc 8 \
        map 0 1 2 3 4 5 6 7 \
        queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
        base-time 0 \
        sched-entry S 0x7f 990000 \
        sched-entry S 0x80  10000 \
        flags 0x2

because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard
band added earlier than its 'gate close' event, such that packet
overruns won't occur in the worst case of the largest packet possible.

Since guard bands are statically determined based on the per-tc
QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU,
we need to discuss what happens with TC 7 depending on kernel version,
since the driver, prior to commit 55a515b1f5a9 ("net: dsa: felix: drop
oversized frames with tc-taprio instead of hanging the port"), did not
touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU.

1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to
  1518, and at gigabit this introduces a static guard band (independent
  of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit
  time of 20 octets => 160 ns). But this is larger than the time window
  itself, of 10000 ns. So, the queue system never considers a frame with
  TC 7 as eligible for transmission, since the gate practically never
  opens, and these frames are forever stuck in the TX queues and hang
  the port.

2 (after vsc9959_tas_guard_bands_update): Under the sole goal of
  enabling oversized frame dropping, we make an effort to set
  QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays
  one more role, which we did not take into account: per-tc static guard
  band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead).
  There is a discrepancy between what the driver thinks (that there is
  no guard band, and 100% of min_gate_len[tc] is available for egress
  scheduling) and what the hardware actually does (crops the equivalent
  of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this
  means that the hardware thinks it has exactly 0 ns for scheduling tc 7.

In both cases, even minimum sized Ethernet frames are stuck on egress
rather than being considered for scheduling on TC 7, even if they would
fit given a proper configuration. Considering the current situation,
with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230
octets in size are not eligible for oversized dropping (because they are
smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible
for scheduling either, because the min_gate_len[7] (10000 ns) minus the
guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per
octet == 9840 ns) minus the guard band auto-added for L1 overhead by
QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets)
leaves 0 ns for scheduling in the queue system proper.

Investigating the hardware behavior, it becomes apparent that the queue
system needs precisely 33 ns of 'gate open' time in order to consider a
frame as eligible for scheduling to a tc. So the solution to this
problem is to amend vsc9959_tas_guard_bands_update(), by giving the
per-tc guard bands less space by exactly 33 ns, just enough for one
frame to be scheduled in that interval. This allows the queue system to
make forward progress for that port-tc, and prevents it from hanging.

Fixes: 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

efi/x86: libstub: remove unused variable

The variable "has_system_memory" is unused in function
‘adjust_memory_range_protection’, remove it.

Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

rv/reactor: add __init/__exit annotations to module init/exit funcs

Add missing __init/__exit annotations to module init/exit funcs.

Link: https://lkml.kernel.org/r/20220906141210.132607-1-xiujianfeng@huawei.com
Fixes: 135b881ea885 ("rv/reactor: Add the printk reactor")
Fixes: e88043c0ac16 ("rv/reactor: Add the panic reactor")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Fix to check event_mutex is held while accessing trigger list

Since the check_user_trigger() is called outside of RCU
read lock, this list_for_each_entry_rcu() caused a suspicious
RCU usage warning.

# echo hist:keys=pid > events/sched/sched_stat_runtime/trigger
# cat events/sched/sched_stat_runtime/trigger
[   43.167032]
[   43.167418] =============================
[   43.167992] WARNING: suspicious RCU usage
[   43.168567] 5.19.0-rc5-00029-g19ebe4651abf #59 Not tainted
[   43.169283] -----------------------------
[   43.169863] kernel/trace/trace_events_trigger.c:145 RCU-list traversed in non-reader section!!
...

However, this file->triggers list is safe when it is accessed
under event_mutex is held.
To fix this warning, adds a lockdep_is_held check to the
list_for_each_entry_rcu().

Link: https://lkml.kernel.org/r/166226474977.223837.1992182913048377113.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: hold caller_addr to hardirq_{enable,disable}_ip

Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed
in CALLER_ADDR0.
The function trace_hardirqs_on_caller should have been intended to use
caller_addr to represent the address that caller wants to be traced.

For example, lockdep log in riscv showing the last {enabled,disabled} at
__trace_hardirqs_{on,off} all the time(if called by):
[   57.853175] hardirqs last  enabled at (2519): __trace_hardirqs_on+0xc/0x14
[   57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14

After use trace_hardirqs_xx_caller, we can get more effective information:
[   53.781428] hardirqs last  enabled at (2595): restore_all+0xe/0x66
[   53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10

Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: c3bc8fd637a96 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracepoint: Allow trace events in modules with TAINT_TEST

Commit 2852ca7fba9f ("panic: Taint kernel if tests are run")
introduced a new taint type, TAINT_TEST, to signal that an
in-kernel test module has been loaded.

TAINT_TEST taint type defaults into a 'bad_taint' list for
kernel tracing and blocks the creation of trace events. This
causes a problem for CXL testing where loading the cxl_test
module makes all CXL modules out-of-tree, blocking any trace
events.

Trace events are in development for CXL at the moment and this
issue was found in test with v6.0-rc1.

Link: https://lkml.kernel.org/r/20220829171048.263065-1-alison.schofield@intel.com
Fixes: 2852ca7fba9f7 ("panic: Taint kernel if tests are run")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

MAINTAINERS: add scripts/tracing/ to TRACING

The files in scripts/tracing/ belong to the TRACING subsystem.

Add a corresponding file entry for TRACING.

Link: https://lkml.kernel.org/r/20220825115927.20598-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

MAINTAINERS: Add Runtime Verification (RV) entry

Add a Runtime Verification (RV) entry in the MAINTAINERS file
with Steven Rostedt and myself as maintainers.

Link: https://lkml.kernel.org/r/b24c13553b6947a8da16d884ca464e4233eb8fb7.1661268579.git.bristot@kernel.org
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rv/monitors: Make monitor's automata definition static

Monitor's automata definition is only used locally, so make
them static for all existing monitors.

Link: https://lore.kernel.org/all/202208210332.gtHXje45-lkp@intel.com
Link: https://lore.kernel.org/all/202208210358.6HH3OrVs-lkp@intel.com
Link: https://lkml.kernel.org/r/a50e27c3738d6ef809f4201857229fed64799234.1661266564.git.bristot@kernel.org
Fixes: ccc319dcb450 ("rv/monitor: Add the wwnr monitor")
Fixes: 8812d21219b9 ("rv/monitor: Add the wip monitor skeleton created by dot2k")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

afs: Return -EAGAIN, not -EREMOTEIO, when a file already locked

When trying to get a file lock on an AFS file, the server may return
UAEAGAIN to indicate that the lock is already held. This is currently
translated by the default path to -EREMOTEIO.

Translate it instead to -EAGAIN so that we know we can retry it.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:
"Just one fix for now for the AMBA bus code from Isaac Manjarres"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()

Merge tag 'erofs-for-6.0-rc5-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:

- Fix return codes in erofs_fscache_{meta_,}read_folio error paths

- Fix potential wrong pcluster sizes for later non-4K lclusters

- Fix in-memory pcluster use-after-free on UP platforms

* tag 'erofs-for-6.0-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix pcluster use-after-free on UP platforms
  erofs: avoid the potentially wrong m_plen for big pcluster
  erofs: fix error return code in erofs_fscache_{meta_,}read_folio

net: usb: qmi_wwan: add Quectel RM520N

add support for Quectel RM520N which is based on Qualcomm SDX62 chip.

0x0801: DIAG + NMEA + AT + MODEM + RMNET

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0801 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=RM520N-GL
S:  SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: jerry.meng <jerry-meng@foxmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data

of_device_get_match_data is called on priv->dev before priv->dev is
actually set. Move of_device_get_match_data after priv->dev is correctly
set to fix this kernel panic.

Fixes: 3bb0844e7bcd ("net: dsa: qca8k: cache match data to speed up access")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tcp: fix early ETIMEDOUT after spurious non-SACK RTO

Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.

Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:

(*1) Send one data packet on a non-SACK connection

(*2) Because no ACK packet is received, the packet is retransmitted
     and we enter CA_Loss; but this retransmission is spurious.

(*3) The ACK for the original data is received. The transmitted packet
     is acknowledged.  The TCP timestamp is before the retrans_stamp,
     so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
     true without changing state to Open (because tcp_is_sack() is
     false), and tcp_process_loss() returns without calling
     tcp_try_undo_recovery().  Normally after undoing a CA_Loss
     episode, tcp_fastretrans_alert() would see that the connection
     has returned to CA_Open and fall through and call
     tcp_try_to_open(), which would set retrans_stamp to 0.  However,
     for non-SACK connections we hold the connection in CA_Loss, so do
     not fall through to call tcp_try_to_open() and do not set
     retrans_stamp to 0. So retrans_stamp is (erroneously) still
     non-zero.

     At this point the first "retransmission event" has passed and
     been recovered from. Any future retransmission is a completely
     new "event". However, retrans_stamp is erroneously still
     set. (And we are still in CA_Loss, which is correct.)

(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
     packet is sent. Note: No data is transmitted between (*3) and
     (*4) and we disabled keep alives.

     The socket's timeout SHOULD be calculated from this point in
     time, but instead it's calculated from the prior "event" 16
     minutes ago (step (*2)).

(*5) Because no ACK packet is received, the packet is retransmitted.

(*6) At the time of the 2nd retransmission, the socket returns
     ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
     too far in the past (set at the time of (*2)).

This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.

Fixes: da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'soc-fixes-6.0-rc4' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"These are the expected fixes for the SoC tree. I have let the patches
  pile up a little too long, so this is bigger than I would have liked.

   - Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
     TEE firmware

   - Updates to the MAINTAINERS file for the PolarFire SoC

   - Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
     platforms

   - A fix for a missing dependnecy in the NXP DPIO driver

   - Broadcom BCA fixes to the newly added devicetree files

   - Multiple fixes for Microchip AT91 based SoCs, dealing with
     self-refresh timings and regulator settings in DT

   - Several DT fixes for NXP i.MX platforms, dealing with incorrect
     GPIO settings, extraneous nodes, and a wrong clock setting"

* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
  soc: fsl: select FSL_GUTS driver for DPIO
  ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
  ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
  ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
  ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
  ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
  ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
  ARM: at91: pm: fix self-refresh for sama7g5
  soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
  ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
  ARM: ixp4xx: fix typos in comments
  arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
  tee: fix compiler warning in tee_shm_register()
  arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
  arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
  arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
  arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
  arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  soc: imx: gpcv2: Assert reset before ungating clock
  arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
  ...

erofs: fix pcluster use-after-free on UP platforms

During stress testing with CONFIG_SMP disabled, KASAN reports as below:

==================================================================
BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30
Read of size 8 at addr ffff8881094223f8 by task stress/7789

CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
..
__mutex_lock+0xe5/0xc30
..
z_erofs_do_read_page+0x8ce/0x1560
..
z_erofs_readahead+0x31c/0x580
..
Freed by task 7787
kasan_save_stack+0x1e/0x40
kasan_set_track+0x20/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free+0x10c/0x190
kmem_cache_free+0xed/0x380
rcu_core+0x3d5/0xc90
__do_softirq+0x12d/0x389

Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x97/0xb0
call_rcu+0x3d/0x3f0
erofs_shrink_workstation+0x11f/0x210
erofs_shrink_scan+0xdc/0x170
shrink_slab.constprop.0+0x296/0x530
drop_slab+0x1c/0x70
drop_caches_sysctl_handler+0x70/0x80
proc_sys_call_handler+0x20a/0x2f0
vfs_write+0x555/0x6c0
ksys_write+0xbe/0x160
do_syscall_64+0x3b/0x90

The root cause is that erofs_workgroup_unfreeze() doesn't reset to
orig_val thus it causes a race that the pcluster reuses unexpectedly
before freeing.

Since UP platforms are quite rare now, such path becomes unnecessary.
Let's drop such specific-designed path directly instead.

Fixes: 73f5c66df3e2 ("staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220902045710.109530-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: avoid the potentially wrong m_plen for big pcluster

Actually, 'compressedlcs' stores compressed block count rather than
lcluster count. Therefore, the number of bits for shifting the count
should be 'LOG_BLOCK_SIZE' rather than 'lclusterbits' although current
lcluster size is 4K.

The value of 'm_plen' will be wrong once we enable the non 4K-sized
lcluster.

Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220812060150.8510-1-huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: fix error return code in erofs_fscache_{meta_,}read_folio

If erofs_fscache_alloc_request fail and then goto out, it will return 0.
it should return a negative error code instead of 0.

Fixes: d435d53228dd ("erofs: change to use asynchronous io for fscache readpage/readahead")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220815034829.3940803-1-sunke32@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.

Remove the CONFIG_PREEMPT_RT symbol from the ifdef around
do_softirq_own_stack() and move it to Kconfig instead.

Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on
HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT.
This ensures that softirq stacks are not used on PREEMPT_RT and avoids
a 'select' statement on an option which has a 'depends' statement.

Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'for-net-2022-09-02' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- Fix regression preventing ACL packet transmission
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: intel: Simplify intel_eth_pci_remove()

There is no point to call pcim_iounmap_regions() in the remove function,
this frees a managed resource that would be release by the framework
anyway.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. Fix this up to be much
simpler logic and only create the root debugfs directory once when the
driver is first accessed. That resolves the memory leak and makes
things more obvious as to what the intent is.

Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: stable <stable@kernel.org>
Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: sr: fix out-of-bounds read when setting HMAC data.

The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:

Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208 memcpy(hinfo->secret, secret, slen);
(gdb) bt
#0  seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
#1  0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
    extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
    family=<optimized out>) at net/netlink/genetlink.c:731
#2  0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
    family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
#3  genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
#4  0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
    at net/netlink/af_netlink.c:2501
#5  0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
#6  0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
    at net/netlink/af_netlink.c:1319
#7  netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
    at net/netlink/af_netlink.c:1345
#8  0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'

The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.

Reported-by: Lucas Leong <wmliang.tw@gmail.com>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bonding-fixes'

Hangbin Liu says:

====================
bonding: fix lladdr finding and confirmation

This patch set fixed 3 issues when setting lladdr as bonding IPv6 target.
Please see each patch for the details.

v2: separate the patch to 3 parts
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: accept unsolicited NA message

The unsolicited NA message with all-nodes multicast dest address should
be valid, as this also means the link could reach the target.

Also rename bond_validate_ns() to bond_validate_na().

Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: add all node mcast address when slave up

When a link is enslave to bond, it need to set the interface down first.
This makes the slave remove mac multicast address 33:33:00:00:00:01(The
IPv6 multicast address ff02::1 is kept even when the interface down). When
bond set the slave up, ipv6_mc_up() was not called due to commit c2edacf80e15
("bonding / ipv6: no addrconf for slaves separately from master").

This is not an issue before we adding the lladdr target feature for bonding,
as the mac multicast address will be added back when bond interface up and
join group ff02::1.

But after adding lladdr target feature for bonding. When user set a lladdr
target, the unsolicited NA message with all-nodes multicast dest will be
dropped as the slave interface never add 33:33:00:00:00:01 back.

Fix this by calling ipv6_mc_up() to add 33:33:00:00:00:01 back when
the slave interface up.

Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: use unspecified address if no available link local address

When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get
available source address and send IPv6 neighbor solicit message.

If the target is global address, ipv6_dev_get_saddr() will get any
available src address. But if the target is link local address,
ipv6_dev_get_saddr() will only get available address from our interface,
i.e. the corresponding bond interface.

But before bond interface up, all the address is tentative, while
ipv6_dev_get_saddr() will ignore tentative address. This makes we can't
find available link local src address, then bond_ns_send() will not be
called and no NS message was sent. Finally bond interface will keep in
down state.

Fix this by sending NS with unspecified address if there is no available
source address.

Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 6.0-rc4

Merge tag 'powerpc-6.0-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix handling of PCI domains in /proc on 32-bit systems using the
   recently added support for numbering buses from zero for each domain.

- A fix and a revert for some changes to use READ/WRITE_ONCE() which
   caused problems with KASAN enabled due to sanitisation calls being
   introduced in low-level paths that can't cope with it.

- Fix build errors on 32-bit caused by the syscall table being
   misaligned sometimes.

- Two fixes to get IBM Cell native machines booting again, which had
   bit-rotted while my QS22 was temporarily out of action.

- Fix the papr_scm driver to not assume the order of events returned by
   the hypervisor is stable, and a related compile fix.

Thanks to Aneesh Kumar K.V, Christophe Leroy, Jordan Niethe, Kajol Jain,
Masahiro Yamada, Nathan Chancellor, Pali Rohár, Vaibhav Jain, and Zhouyi
Zhou.

* tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Ensure rc is always initialized in papr_scm_pmu_register()
  Revert "powerpc/irq: Don't open code irq_soft_mask helpers"
  powerpc: Fix hard_irq_disable() with sanitizer
  powerpc/rtas: Fix RTAS MSR[HV] handling for Cell
  Revert "powerpc: Remove unused FW_FEATURE_NATIVE references"
  powerpc: align syscall table for ppc32
  powerpc/pci: Enable PCI domains in /proc when PCI bus numbers are not unique
  powerpc/papr_scm: Fix nvdimm event mappings

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"s390:

   - PCI interpretation compile fixes

  RISC-V:

   - fix unused variable warnings in vcpu_timer.c

   - move extern sbi_ext declarations to a header

  x86:

   - check validity of argument to KVM_SET_MP_STATE

   - use guest's global_ctrl to completely disable guest PEBS

   - fix a memory leak on memory allocation failure

   - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES

   - fix build failure with Clang integrated assembler

   - fix MSR interception

   - always flush TLBs when enabling dirty logging"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: check validity of argument to KVM_SET_MP_STATE
  perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
  KVM: x86: fix memoryleak in kvm_arch_vcpu_create()
  KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
  KVM: s390: pci: Hook to access KVM lowlevel from VFIO
  riscv: kvm: move extern sbi_ext declarations to a header
  riscv: kvm: vcpu_timer: fix unused variable warnings
  KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE()
  KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang
  KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()
  kvm: x86: mmu: Always flush TLBs when enabling dirty logging
  kvm: x86: mmu: Drop the need_remote_flush() function

Makefile.extrawarn: re-enable -Wformat for clang; take 2

-Wformat was recently re-enabled for builds with clang, then quickly
re-disabled, due to concerns stemming from the frequency of default
argument promotion related warning instances.

commit 258fafcd0683 ("Makefile.extrawarn: re-enable -Wformat for clang")
commit 21f9c8a13bb2 ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"")

ISO WG14 has ratified N2562 to address default argument promotion
explicitly for printf, as part of the upcoming ISO C2X standard.

The behavior of clang was changed in clang-16 to not warn for the cited
cases in all language modes.

Add a version check, so that users of clang-16 now get the full effect
of -Wformat. For older clang versions, re-enable flags under the
-Wformat group that way users still get some useful checks related to
format strings, without noisy default argument promotion warnings. I
intentionally omitted -Wformat-y2k and -Wformat-security from being
re-enabled, which are also part of -Wformat in clang-16.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://github.com/llvm/llvm-project/issues/57102
Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdf
Suggested-by: Justin Stitt <jstitt007@gmail.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'wireless-2022-09-03' of git://git./linux/kernel/git/wireless/wireless

Johannes berg says:

====================
We have a handful of fixes:
- fix DMA from stack in wilc1000 driver
- fix crash on chip reset failure in mt7921e
- fix for the reported warning on aggregation timer expiry
- check packet lengths in hwsim virtio paths
- fix compiler warnings/errors with AAD construction by
using struct_group
- fix Intel 4965 driver rate scale operation
- release channel contexts correctly in mac80211 mlme code
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'gpio-fixes-for-v6.0-rc4' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
"A a set of fixes from the GPIO subsystem.

  Most are small driver fixes except the realtek-otto driver patch which
  is pretty big but addresses a significant flaw that can cause the CPU
  to stay infinitely busy on uncleared ISR on some platforms.

  Summary:
   - MAINTAINERS update
   - fix resource leaks in gpio-mockup and gpio-pxa
   - add missing locking in gpio-pca953x
   - use 32-bit I/O in gpio-realtek-otto
   - make irq_chip structures immutable in four more drivers"

* tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ws16c48: Make irq_chip immutable
  gpio: 104-idio-16: Make irq_chip immutable
  gpio: 104-idi-48: Make irq_chip immutable
  gpio: 104-dio-48e: Make irq_chip immutable
  gpio: realtek-otto: switch to 32-bit I/O
  gpio: pca953x: Add mutex_lock for regcache sync in PM
  gpio: mockup: remove gpio debugfs when remove device
  gpio: pxa: use devres for the clock struct
  MAINTAINERS: rectify entry for XILINX GPIO DRIVER

gpio: ws16c48: Make irq_chip immutable

Kernel warns about mutable irq_chips:

"not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: 104-idio-16: Make irq_chip immutable

Kernel warns about mutable irq_chips:

"not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: 104-idi-48: Make irq_chip immutable

Kernel warns about mutable irq_chips:

"not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: 104-dio-48e: Make irq_chip immutable

Kernel warns about mutable irq_chips:

"not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Merge tag 'for-linus-6.0-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- a minor fix for the Xen grant driver

- a small series fixing a recently introduced problem in the Xen
   blkfront/blkback drivers with negotiation of feature usage

* tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()
  xen-blkfront: Cache feature_persistent value before advertisement
  xen-blkfront: Advertise feature-persistent as user requested
  xen-blkback: Advertise feature-persistent as user requested

Merge tag 'loongarch-fixes-6.0-2' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
"Fix several build errors or warnings, cleanup some code, and adjust
  arch_do_signal_or_restart() to adapt generic entry"

* tag 'loongarch-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: mm: Remove the unneeded result variable
  LoongArch: Fix arch_remove_memory() undefined build error
  LoongArch: Fix section mismatch due to acpi_os_ioremap()
  LoongArch: Improve dump_tlb() output messages
  LoongArch: Adjust arch_do_signal_or_restart() to adapt generic entry
  LoongArch: Avoid orphan input sections

Merge tag 's390-6.0-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

- Update defconfigs

- Fix linker script to align nospec tables correctly to avoid
   potentially unbootable kernel with some config options

- Fix alignment check in prepare_hugepage_range() for 2GB hugepages to
   avoid BUG in __unmap_hugepage_range() for unaligned mappings later

- Remove useless hugepage address alignment in hugetlb fault handling

* tag 's390-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages
  s390: update defconfigs
  s390: fix nospec table alignments
  s390/mm: remove useless hugepage address alignment

Merge tag 'input-for-v6.0-rc3' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- GT1158 ID added to Goodix touchscreen driver

- Boeder Force Feedback Wheel USB added to iforce joystick driver

- fixup for iforce driver to avoid hangups

- fix autoloading of rk805-pwrkey driver.

* tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: iforce - add support for Boeder Force Feedback Wheel
  Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
  Input: goodix - add compatible string for GT1158
  MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS
  Input: rk805-pwrkey - fix module autoloading
  Input: goodix - add support for GT1158
  dt-bindings: input: touchscreen: add compatible string for Goodix GT1158

Merge tag 'tty-6.0-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial/vt driver fixes for 6.0-rc4 that
  resolve a number of reported issues:

   - n_gsm fixups for previous changes that caused problems

   - much-reported serdev crash fix that showed up in 6.0-rc1

   - vt font selection bugfix

   - kerneldoc build warning fixes

   - other tiny serial core fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: n_gsm: avoid call of sleeping functions from atomic context
  tty: n_gsm: replace kicktimer with delayed_work
  tty: n_gsm: initialize more members at gsm_alloc_mux()
  tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
  tty: serial: atmel: Preserve previous USART mode if RS485 disabled
  tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  tty: Fix lookahead_buf crash with serdev
  serial: fsl_lpuart: RS485 RTS polariy is inverse
  vt: Clear selection before changing the font
  serial: document start_rx member at struct uart_ops

Merge tag 'staging-6.0-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.0-rc4 that resolve
  some reported problems and add some a device id:

   - new device id for r8188eu driver

   - use-after-free bugfixes for the rtl8712 driver

   - fix up firmware dependency problem for the r8188eu driver

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8712: fix use after free bugs
  staging: r8188eu: Add Rosewill USB-N150 Nano to device tables
  staging: r8188eu: add firmware dependency

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Here's a collection of primarily clk driver fixes, with a couple fixes
  to the core framework.

  We had to revert out a commit that affected boot on some devices that
  have the CLK_OPS_PARENT_ENABLE flag set. It isn't critical to have
  that fix so we'll try again next time.

  Driver side fixes include:

   - Plug an OF-node refcount bug in the TI clk driver

   - Fix the error handling in the raspberry pi firmware get_rate so
     that errors don't look like valid frequencies

   - Avoid going out of bounds in the raspberry pi driver too if the
     video firmware returns something we're not expecting"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"
  clk: bcm: rpi: Show clock id limit in error case
  clk: bcm: rpi: Add missing newline
  clk: bcm: rpi: Prevent out-of-bounds access
  clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate
  clk: core: Fix runtime PM sequence in clk_core_unprepare()
  clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops
  clk: ti: Fix missing of_node_get() ti_find_clock_provider()

Merge tag 'hwmon-for-v6.0-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- Fix out of bounds access in gpio-fan driver

- Fix VOUT margin caching in PMBus core

- Avoid error message after -EPROBE_DEFER from devm_regulator_register()

* tag 'hwmon-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (gpio-fan) Fix array out of bounds access
  hwmon: (pmbus) Fix vout margin caching
  hwmon: (pmbus) Use dev_err_probe() to filter -EPROBE_DEFER error messages

mm: pagewalk: Fix race between unmap and page walker

The mmap lock protects the page walker from changes to the page tables
during the walk. However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.

For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.

For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.

This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging. As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.

Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wifi: use struct_group to copy addresses

We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.

Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211_hwsim: check length for virtio packets

An invalid packet with a length shorter than the specified length in the
netlink header can lead to use-after-frees and slab-out-of-bounds in the
processing of the netlink attributes, such as the following:

  BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010
  Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12

  Workqueue: events hwsim_virtio_rx_work
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x5d
   print_report.cold+0x5e/0x5e5
   kasan_report+0xb1/0x1c0
   __nla_validate_parse+0x1258/0x2010
   __nla_parse+0x22/0x30
   hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0
   hwsim_virtio_rx_work+0x1b2/0x370
   process_one_work+0x8df/0x1530
   worker_thread+0x575/0x11a0
   kthread+0x29d/0x340
   ret_from_fork+0x22/0x30
</TASK>

Discarding packets with an invalid length solves this.
Therefore, skb->len must be set at reception.

Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: fix locking in auth/assoc timeout

If we hit an authentication or association timeout, we only
release the chanctx for the deflink, and the other link(s)
are released later by ieee80211_vif_set_links(), but we're
not locking this correctly.

Fix the locking here while releasing the channels and links.

Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1
Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: mlme: release deflink channel in error case

In the prep_channel error case we didn't release the deflink
channel leaving it to be left around. Fix that.

Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: fix link warning in RX agg timer expiry

The rx data link pointer isn't set from the RX aggregation timer,
resulting in a later warning. Fix that by setting it to the first
valid link for now, with a FIXME to worry about statistics later,
it's not very important since it's just the timeout case.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com
Fixes: 56057da4569b ("wifi: mac80211: rx: track link in RX data")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

LoongArch: mm: Remove the unneeded result variable

Return the value pa_to_nid() directly instead of storing it in another
redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix arch_remove_memory() undefined build error

The kernel build error when unslected CONFIG_MEMORY_HOTREMOVE because
arch_remove_memory() is needed by mm/memory_hotplug.c but undefined.

Some build error messages like:

LD      vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN     modules.builtin
LD      .tmp_vmlinux.kallsyms1
loongarch64-linux-gnu-ld: mm/memory_hotplug.o: in function `.L242':
memory_hotplug.c:(.ref.text+0x930): undefined reference to `arch_remove_memory'
make: *** [Makefile:1169：vmlinux] 错误 1

Removed CONFIG_MEMORY_HOTREMOVE requirement and rearrange the file refer
to the definitions of other platform architectures.

Signed-off-by: Yupeng Li <liyupeng@zbhlos.com>
Signed-off-by: Caicai <caizp2008@163.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix section mismatch due to acpi_os_ioremap()

Now acpi_os_ioremap() is marked with __init because it calls memblock_
is_memory() which is also marked with __init in the !ARCH_KEEP_MEMBLOCK
case. However, acpi_os_ioremap() is called by ordinary functions such
as acpi_os_{read, write}_memory() and causes section mismatch warnings:

WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_read_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_write_memory (section: .text) -> acpi_os_ioremap (section: .init.text)

Fix these warnings by selecting ARCH_KEEP_MEMBLOCK unconditionally and
removing the __init modifier of acpi_os_ioremap(). This can also give a
chance to track "memory" and "reserved" memblocks after early boot.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Improve dump_tlb() output messages

1, Use nr/nx to replace ri/xi;
2, Add 0x prefix for hexadecimal data.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Adjust arch_do_signal_or_restart() to adapt generic entry

Commit 8ba62d37949e248c69 ("task_work: Call tracehook_notify_signal from
get_signal on all architectures") adjust arch_do_signal_or_restart() for
all architectures. LoongArch hasn't been upstream yet at that time and
can be still built successfully without adjustment because this function
has a weak version with the correct prototype. It is obviously that we
should convert LoongArch to use new API, otherwise some signal handlings
will be lost.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Avoid orphan input sections

Ensure that all input sections are listed explicitly in the linker
script, and issue a warning otherwise. This ensures that the binary
image matches the PE/COFF and other image metadata exactly, which is
important for things like code signing.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-09-02 (i40e, iavf)

This series contains updates to i40e and iavf drivers.

Przemyslaw adds reset to ADQ configuration to allow for setting of rate
limit beyond TC0 for i40e.

Ivan Vecera does not free client on failure to open which could cause
NULL pointer dereference to occur on i40e. He also detaches device
during reset to prevent NDO calls with could cause races for iavf.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
This series contains updates to ice driver only.

Przemyslaw fixes memory leak of DMA memory due to incorrect freeing of
rx_buf.

Michal S corrects incorrect call to free memory.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: fix kernel oops on ksz8 switches

After driver refactoring we was running ksz9477 specific CPU port
configuration on ksz8 family which ended with kernel oops. So, make sure
we run this code only on ksz9477 compatible devices.

Tested on KSZ8873 and KSZ9477.

Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: only remove 'hotplug-status' when the vif is actually destroyed

Removing 'hotplug-status' in backend_disconnected() means that it will be
removed even in the case that the frontend unilaterally disconnects (which
it is free to do at any time). The consequence of this is that, when the
frontend attempts to re-connect, the backend gets stuck in 'InitWait'
rather than moving straight to 'Connected' (which it can do because the
hotplug script has already run).
Instead, the 'hotplug-status' mode should be removed in netback_remove()
i.e. when the vif really is going away.

Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fec: Use a spinlock to guard `fep->ptp_clk_on`

Mutexes cannot be taken in a non-preemptible context,
causing a panic in `fec_ptp_save_state()`. Replacing
`ptp_clk_mutex` by `tmreg_lock` fixes this.

Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled")
Fixes: f79959220fa5 ("fec: Restart PPS after link state change")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6
Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fec: add pm_qos support on imx6q platform

There is a very low probability that tx timeout will occur during
suspend and resume stress test on imx6q platform. So we add pm_qos
support to prevent system from entering low level idles which may
affect the transmission of tx.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
netfilter: bug fixes for net

1. Fix IP address check in irc DCC conntrack helper, this should check
   the opposite direction rather than the destination address of the
   packets' direction, from David Leadbeater.

2. bridge netfilter needs to drop dst references, from Harsh Modi.
   This was fine back in the day the code was originally written,
   but nowadays various tunnels can pre-set metadata dsts on packets.

3. Remove nf_conntrack_helper sysctl and the modparam toggle, users
   need to explicitily assign the helpers to use via nftables or
   iptables.  Conntrack helpers, by design, may be used to add dynamic
   port redirections to internal machines, so its necessary to restrict
   which hosts/peers are allowed to use them.
   It was discovered that improper checking in the irc DCC helper makes
   it possible to trigger the 'please do dynamic port forward'
   from outside by embedding a 'DCC' in a PING request; if the client
   echos that back a expectation/port forward gets added.
   The auto-assign-for-everything mechanism has been in "please don't do this"
   territory since 2012.  From Pablo.

4. Fix a memory leak in the netdev hook error unwind path, also from Pablo.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_conntrack_irc: Fix forged IP logic
  netfilter: nf_tables: clean up hook list when offload flags check fails
  netfilter: br_netfilter: Drop dst references before setting.
  netfilter: remove nf_conntrack_helper sysctl and modparam toggles
====================

Link: https://lore.kernel.org/r/20220901071238.3044-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'block-6.0-2022-09-02' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request via Christoph:
     - error handling fix for the new auth code (Hannes Reinecke)
     - fix unhandled tcp states in nvmet_tcp_state_change (Maurizio
       Lombardi)
     - add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh)

- Add documentation for the ublk driver merged in this merge window
   (Ming)

* tag 'block-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
  Documentation: document ublk
  nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
  nvmet-auth: add missing goto in nvmet_setup_auth()
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610

Merge tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- A single fix for over-eager retries for networking (Pavel)

- Revert the notification slot support for zerocopy sends.

   It turns out that even after more than a year or development and
   testing, there's not full agreement on whether just using plain
   ordered notifications is Good Enough to avoid the complexity of using
   the notifications slots. Because of that, we decided that it's best
   left to a future final decision.

   We can always bring back this feature, but we can't really change it
   or remove it once we've released 6.0 with it enabled. The reverts
   leave the usual CQE notifications as the primary interface for
   knowing when data was sent, and when it was acked. (Pavel)

* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
  selftests/net: return back io_uring zc send tests
  io_uring/net: simplify zerocopy send user API
  io_uring/notif: remove notif registration
  Revert "io_uring: rename IORING_OP_FILES_UPDATE"
  Revert "io_uring: add zc notification flush requests"
  selftests/net: temporarily disable io_uring zc test
  io_uring/net: fix overexcessive retries

Merge tag '6.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Five fixes, all also marked for stable:

   - fixes for collapse range and insert range (also fixes xfstest
     generic/031)

   - memory leak fix"

* tag '6.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix small mempool leak in SMB2_negotiate()
  smb3: use filemap_write_and_wait_range instead of filemap_write_and_wait
  smb3: fix temporary data corruption in insert range
  smb3: fix temporary data corruption in collapse range
  smb3: Move the flush out of smb2_copychunk_range() into its callers

Merge tag 'landlock-6.0-rc4' of git://git./linux/kernel/git/mic/linux

Pull landlock fix from Mickaël Salaün:
"This fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right when
  multiple rulesets/domains are stacked.

  The expected behaviour was that an additional ruleset can only
  restrict the set of permitted operations, but in this particular case,
  it was potentially possible to re-gain the LANDLOCK_ACCESS_FS_REFER
  right"

* tag 'landlock-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix file reparenting without explicit LANDLOCK_ACCESS_FS_REFER

Merge tag 'mmc-v6.0-rc2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:

- Fix workaround for SD UHS-I voltage switch

* tag 'mmc-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure
mmc: core: Fix UHS-I SD 1.8V workaround branch

Merge tag 'drm-fixes-2022-09-02' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular fixes pull. One core dma-buf fix, then two weeks of i915
  fixes, a lot of amdgpu fixes mostly for new IP, and a bunch of msm
  fixes, mostly modesetting ones.

  Nothing seems too bad at this point.

  dma-buf/dma-resv:
   - Fence-handling fix

  i915:
   - GVT fixes including fix for a CommetLake regression in mmio table
     and misc doc and typo fixes
   - Fix CCS handling
   - Fix for guc requests after reset
   - Display DSI related fixes
   - Display backlight related fixes
   - Fix for a null pointer dereference
   - HDMI related quirk for ECS Liva Q2 with GLK graphics
   - Skip wm/ddb readout for disabled pipes

  amdgpu:
   - FRU error message fix
   - MES 11 updates
   - DCN 3.2.x fixes
   - DCN 3.1.4 fixes
   - Fix possible use after free in CS IOCTL
   - SMU 13.0.x fixes
   - Fix iolink reporting on devices with direct connections to CPU
   - GFX10 tap delay firmware fixes

  msm:
   - Fix for inconsistent indenting in msm_dsi_dphy_timing_calc_v3().
   - Fix to make eDP the first connector in the connected list.
   - Fix to populate intf_cfg correctly before calling reset_intf_cfg().
   - Specify the correct number of DSI regulators for SDM660.
   - Specify the correct number of DSI regulators for MSM8996.
   - Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training
   - Fix probe-deferral crash in gpu devfreq
   - Fix gpu debugfs deadlock"

* tag 'drm-fixes-2022-09-02' of git://anongit.freedesktop.org/drm/drm: (51 commits)
  drm/amd/amdgpu: skip ucode loading if ucode_size == 0
  drm/amdgpu: only init tap_delay ucode when it's included in ucode binary
  drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypass
  drm/amd/display: Fix check for stream and plane
  drm/amd/display: Re-initialize viewport after pipe merge
  drm/amd/display: Use correct plane for CAB cursor size allocation
  drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinks
  drm/amd/pm: bump SMU 13.0.0 driver_if header version
  drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUs
  drm/amd/pm: use vbios carried pptable for those supported SKUs
  drm/amd/display: fix wrong register access
  drm/amd/display: use actual cursor size instead of max for CAB allocation
  drm/amd/display: disable display fresh from MALL on an edge case for DCN321
  drm/amd/display: Fix CAB cursor size allocation for DCN32/321
  drm/amd/display: Missing HPO instance added
  drm/amd/display: set dig fifo read start level to 7 before dig fifo reset
  drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctl
  drm/amd/display: Fix OTG H timing reset for dcn314
  drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming
  drm/amdgpu: Update mes_v11_api_def.h
  ...

Bluetooth: hci_sync: Fix hci_read_buffer_size_sync

hci_read_buffer_size_sync shall not use HCI_OP_LE_READ_BUFFER_SIZE_V2
sinze that is LE specific, instead it is hci_le_read_buffer_size_sync
version that shall use it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216382
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

iavf: Detach device during reset task

iavf_reset_task() takes crit_lock at the beginning and holds
it during whole call. The function subsequently calls
iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs
when userspace initiates during the reset task any ndo callback
that runs under RTNL like iavf_open() because some of that
functions tries to take crit_lock. This leads to classic A-B B-A
deadlock scenario.

To resolve this situation the device should be detached in
iavf_reset_task() prior taking crit_lock to avoid subsequent
ndos running under RTNL and reattach the device at the end.

Fixes: 62fe2a865e6d ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability")
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Patryk Piotrowski <patryk.piotrowski@intel.com>
Cc: SlawomirX Laba <slawomirx.laba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: Fix kernel crash during module removal

The driver incorrectly frees client instance and subsequent
i40e module removal leads to kernel crash.

Reproducer:
1. Do ethtool offline test followed immediately by another one
host# ethtool -t eth0 offline; ethtool -t eth0 offline
2. Remove recursively irdma module that also removes i40e module
host# modprobe -r irdma

Result:
[ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting
[ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished
[ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting
[ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished
[ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110
[ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2
[ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01
[ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1
[ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030
[ 8687.768755] #PF: supervisor read access in kernel mode
[ 8687.773895] #PF: error_code(0x0000) - not-present page
[ 8687.779034] PGD 0 P4D 0
[ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G        W I        5.19.0+ #2
[ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019
[ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e]
[ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b
[ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202
[ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000
[ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000
[ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000
[ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0
[ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008
[ 8687.870342] FS:  00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000
[ 8687.878427] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0
[ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8687.905572] PKRU: 55555554
[ 8687.908286] Call Trace:
[ 8687.910737]  <TASK>
[ 8687.912843]  i40e_remove+0x2c0/0x330 [i40e]
[ 8687.917040]  pci_device_remove+0x33/0xa0
[ 8687.920962]  device_release_driver_internal+0x1aa/0x230
[ 8687.926188]  driver_detach+0x44/0x90
[ 8687.929770]  bus_remove_driver+0x55/0xe0
[ 8687.933693]  pci_unregister_driver+0x2a/0xb0
[ 8687.937967]  i40e_exit_module+0xc/0xf48 [i40e]

Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this
failure is indicated back to i40e_client_subtask() that calls
i40e_client_del_instance() to free client instance referenced
by pf->cinst and sets this pointer to NULL. During the module
removal i40e_remove() calls i40e_lan_del_device() that dereferences
pf->cinst that is NULL -> crash.
Do not remove client instance when client open callbacks fails and
just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs
to take care about this situation (when netdev is up and client
is NOT opened) in i40e_notify_client_of_netdev_close() and
calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED
is set.

Fixes: 0ef2d5afb12d ("i40e: KISS the client interface")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: Fix ADQ rate limiting for PF

Fix HW rate limiting for ADQ.
Fallback to kernel queue selection for ADQ, as it is network stack
that decides which queue to use for transmit with ADQ configured.
Reset PF after creation of VMDq2 VSIs required for ADQ, as to
reprogram TX queue contexts in i40e_configure_tx_ring.
Without this patch PF would limit TX rate only according to TC0.

Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge tag 'driver-core-6.0-rc4' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for some oft-reported problems
  in 6.0-rc1.  They include:

   - a bunch of reverts to handle driver_deferred_probe_check_state()
     problems that were part of the 6.0-rc1 merge.

   - firmware_loader bugfixes now that the code is being properly tested
     and used by others

   - arch_topology fix

   - deferred driver probe bugfix to solve a long-suffering amba bus
     problem that many people have reported.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware_loader: Fix memory leak in firmware upload
  firmware_loader: Fix use-after-free during unregister
  arch_topology: Silence early cacheinfo errors when non-existent
  driver core: Don't probe devices after bus_type.match() probe deferral
  Revert "iommu/of: Delete usage of driver_deferred_probe_check_state()"
  Revert "PM: domains: Delete usage of driver_deferred_probe_check_state()"
  Revert "net: mdio: Delete usage of driver_deferred_probe_check_state()"
  Revert "driver core: Delete driver_deferred_probe_check_state()"

Merge tag 'char-misc-6.0-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.0-rc4.

  Included in here are:

   - binder fixes for previous fixes, and a few more fixes uncovered by
     them.

   - iio driver fixes

   - soundwire driver fixes

   - fastrpc driver fixes for memory corruption on some hardware

   - peci driver fix

   - mhi driver fix

  All of these have been in linux-next with no reported problems"

* tag 'char-misc-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: fix alloc->vma_vm_mm null-ptr dereference
  misc: fastrpc: increase maximum session count
  misc: fastrpc: fix memory corruption on open
  misc: fastrpc: fix memory corruption on probe
  soundwire: qcom: fix device status array range
  bus: mhi: host: Fix up null pointer access in mhi_irq_handler
  soundwire: qcom: remove duplicate reset control get
  iio: light: cm32181: make cm32181_pm_ops static
  iio: ad7292: Prevent regulator double disable
  dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  iio: adc: mcp3911: use correct formula for AD conversion
  iio: adc: mcp3911: correct "microchip,device-addr" property
  Revert "binder_alloc: Add missing mmap_lock calls when using the VMA"
  binder_alloc: Add missing mmap_lock calls when using the VMA
  binder: fix UAF of ref->proc caused by race condition
  iio: light: cm3605: Fix an error handling path in cm3605_probe()
  iio: adc: mcp3911: make use of the sign bit
  peci: cpu: Fix use-after-free in adev_release()
  peci: aspeed: fix error check return value of platform_get_irq()

Merge tag 'usb-6.0-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt driver fixes from Greg KH:
"Here are a lot of small USB and Thunderbolt driver fixes for 6.0-rc4
  for reported problems. Included in here are:

   - new usb-serial driver ids

   - dwc3 driver bugfixes for reported problems with 6.0-rc1

   - new device quirks, and reverts of some quirks that were incorrect

   - gadget driver bugfixes for reported problems

   - USB host controller bugfixes (xhci and others)

   - other small USB fixes, details in the shortlog

   - small thunderbolt driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (51 commits)
  Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"
  usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
  USB: serial: ch341: fix disabled rx timer on older devices
  USB: serial: ch341: fix lost character on LCR updates
  USB: serial: cp210x: add Decagon UCA device id
  Revert "usb: add quirks for Lenovo OneLink+ Dock"
  usb: cdns3: fix issue with rearming ISO OUT endpoint
  usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer
  usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS
  media: mceusb: Use new usb_control_msg_*() routines
  USB: core: Prevent nested device-reset calls
  USB: gadget: Fix obscure lockdep violation for udc_mutex
  usb: dwc2: fix wrong order of phy_power_on and phy_init
  usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
  usb: typec: Remove retimers properly
  usb: dwc3: disable USB core PHY management
  usb: add quirks for Lenovo OneLink+ Dock
  USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
  USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
  USB: serial: option: add Quectel EM060K modem
  ...

Merge tag 'platform-drivers-x86-v6.0-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"Various small fixes and hardware-id additions"

* tag 'platform-drivers-x86-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: p2sb: Fix UAF when caller uses resource name
  platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32
  platform/mellanox: Remove redundant 'NULL' check
  platform/mellanox: Remove unnecessary code
  platform/mellanox: mlxreg-lc: Fix locking issue
  platform/mellanox: mlxreg-lc: Fix coverity warning
  platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes
  platform/x86: thinkpad_acpi: Explicitly set to balanced mode on startup
  platform/x86: asus-wmi: Fix the name of the mic-mute LED classdev
  platform/surface: aggregator_registry: Add HID devices for sensors and UCSI client to SP8
  platform/surface: aggregator_registry: Rename HID device nodes based on new findings
  platform/surface: aggregator_registry: Rename HID device nodes based on their function
  platform/surface: aggregator_registry: Add support for Surface Laptop Go 2
  platform/x86: x86-android-tablets: Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
  platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"It's a lot smaller than last week, with the star of the show being a
  couple of fixes to head.S addressing a boot regression introduced by
  the recent overhaul of that code in non-default configurations (i.e.
  KASLR disabled).

  The first of those two resolves the issue reported (and bisected) by
  Mikulus in the wait_on_bit() thread.

  Summary:

   - Fix two boot issues caused by the recent head.S rework when !KASLR

   - Fix calculation of crashkernel memory reservation

   - Fix bogus error check in PMU IRQ probing code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Reserve enough pages for the initial ID map
  perf/arm_pmu_platform: fix tests for platform_get_irq() failure
  arm64: head: Ignore bogus KASLR displacement on non-relocatable kernels
  arm64/kexec: Fix missing extra range for crashkres_low.