remake: added PV to git package recipe

(From OE-Core rev: fa6b65e1f6192baa284ab5549ba00df0bbedf53b)

Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu.inc: Non deterministic compile of qemu

When you using a qemuppc target and sstate you might end up with
the problem:

qemu-system-ppc: error while loading shared libraries:
   libfdt.so.1: cannot open shared object file: No such file or directory

The way you can force this to happen assuming you are using sstate is
as follows:

bitbake dtc-native
bitbake -c cleansstate qemu-native
bitbake qemu-native
bitbake -c clean dtc-native

Now go start qemu and it will fail.  The solution is to always build
the dtc libraries since they are used and needed by the qemuppc
simulator.

(From OE-Core rev: 79c620016b0be4dacc9fcfbd4baab5ea6c66a440)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add scratch directory for NFS upcall state storage

When the /var/lib/nfs/v4recovery directory is not present, NFSD cannot
record the upcall state and cannot end the 90-second grace period on
startup.  This is true even when NFS4 is not being served according to
nfsstat.

More details and discussion here:
https://lkml.org/lkml/2012/6/11/206

(From OE-Core rev: c7cb5cb92770615ffd302f737d0fef3f2300c321)

Signed-off-by: Rich Dubielzig <rich.dubielzig@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

zip: explictly disable bzip2 support

* we don't depends on bzip2, so make sure it's not autodetected in
  sysroot

(From OE-Core rev: e93186642708cb99bfba776012e345c42e9bd0d5)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perf: add bash dependency

There are a number of scripts in the perf installation that use bash,
so we need to add a run-time dependency on bash for them. If not, we
can generate build errors like "no package provides /bin/bash".

Fixes [YOCTO #3951].

(From OE-Core rev: 8169adeba67180f062fa7c0105fc4283da3103c6)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemtap: add python and bash dependencies

There are a number of scripts in the systemtap installation that use
python and bash, so we need to add run-time dependencies for them.  If
not, we can generate build errors like "no package provides
/usr/bin/python".

Fixes [YOCTO #3951].

(From OE-Core rev: 8a0d31af7008459d1affa0afe3ff193a78f9020d)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Help ncurses-native find terminfo on RHEL 6

[ CQID: WIND00405305 ]

When using ncurses from sstate cache it is not able to find terminfo
for screen on RHEL 6.  While RHEL 6 has /lib/terminfo, it is not
complete, the complete terminfo database is in /usr/share/terminfo.  This
results failure of programs linked to ncurses, such as menuconfig.

(From OE-Core rev: b2f5c8f7dfda0bc8f07561336c8667c864d9c3bb)

Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

eglibc: fix ldd RTLDLIST

The sed expression for retrieving the previous RTLDLIST from ldd script
was also retrieving the double-quotes. Hence, we ended up with a
RTLDLIST like below and ldd would fail:

RTLDLIST=""/lib/ld-linux.so.2 /lib64/ld-linux-x86-64.so.2
/libx32/ld-linux-x32.so.2" /lib/ld-linux-x86-64.so.2"

[YOCTO #3903]

(From OE-Core rev: f2804dc9a9ba666de85b4efb1fd005fa985f4f8a)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rm_work: remove package and packages-split dirs

* as described in
  http://git.openembedded.org/openembedded-core/commit/?id=6107ee294afde395e39d084c33e8e94013c625a9

(From OE-Core rev: 4067afcda78d17058f2aa8d7f82173d181e0aae4)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cups: remove old patch files

(From OE-Core rev: c3c51a5961f77d51e7f8eb1f0746d16576663bba)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pulseaudio: add config option to ensure valgrind is excluded

There have been occasions that pulseaudio sees valgrind and then later it's
not available, adding this setting ensures determinism by disabling it by
default

(From OE-Core rev: 61001cd4d8a36a980b6e6967cba6f0ea48fdaebc)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add KERNEL_EXTRA_ARGS parameter

With recent kernel versions, some ARM configurations need may fail to
build with errors like this:

multiple load addresses: 0x80008000 0x80008000
This is incompatible with uImages
Specify LOADADDR on the commandline to build an uImage

We cannot pass this information in EXTRA_OEMAKE, as
"meta/classes/kernel.bbclass" explicitly ignores all EXTRA_OEMAKE
settings.  So add KERNEL_EXTRA_ARGS parameter so affected boards
can add for example

KERNEL_EXTRA_ARGS = "LOADADDR=0x80008000"

to their configuration.  We make this general enough so other needed
command line options can be passed as well when compiling the kernel.

(From OE-Core rev: e3cdd0aafb9081cd7f1f98490087c1157a3d7403)

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

module.bbclass: Create a new depmodwrapper to assist cross-installs

Previously the build path to STAGING_KERNEL_DIR was being embedded into the
package post install scripts.  We avoid this behavior by generating a special
depmodwrapper script.  This script contains that hard-coded path, ensuring
that re-use of the sstate-cache (and/or packages) will always run through the
wrapper generated by the current build with a checksum that includes
STAGING_KERNEL_DIR.

[ YOCTO #3962 ]

(From OE-Core rev: b18c61bae4d7161c087a004bba3c696006f7a2f6)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity: use lsb distro_identifier

* distro_identifier returns lsb_data['Distributor ID']-lsb_data['Release']
  which in some cases is different then lsb_release -d -s, e.g.
  Distributor ID: Ubuntu
  Description:    Ubuntu 12.04 LTS
  Release:        12.04
  Codename:       precise
  But we probably don't need to sanity list each point release in LTS
  and sstate is already using distro_identifier as prefix for native
  sstate archives
* This will need update to SANITY_TESTED_DISTROS (at least
  s/Ubuntu 12.04 LTS/Ubuntu-12.04/g etc), that's why sending as RFC
  first.

(From OE-Core rev: a32ea459ca168792161af2d521a14fe00cffb4b3)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm.bbclass: add more description for pre/post scriptlets

When write rpm spec file, one description line

"# pkgname - script_type"

is added to pre/post scriptlets for base package but no such line
writted for subpackage.

Add similiar line to subpackage to facilitate handling the pre/post
scriptlets.

(From OE-Core rev: 34f3926f1787f9a2efa2257a2aaea6ee92adf8a3)

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm.bbclass: name postinst files with package name

When create rootfs, some post install scripts need be run on device.
They are saved under directory /etc/rpm-postinst and named with numbers
such as 100, 101 etc.

Update to name the postinst script file with its package name instead of
just number. That may be more easy to debug when there is a error.

[YOCTO #3218]

(From OE-Core rev: 9b2a008c25a7a3152ae2d8c64ae8de2534471d47)

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perl-nativesdk:fix toolchain relocation issues

1, Use create_wrapper to create perl wrapper in the SDK.
2, Add perl.real to perl-nativesdk package.

[YOCTO #3338]

(From OE-Core rev: 643cdac63353527c1b5cb6eeabe75df8d0dc8346)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate_sdk_base.bbclass:fix toolchain relocation issues

When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.

This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.

[YOCTO #3338]

(From OE-Core rev: 365aa1412a3d31128cb3df02959acdc7df5f2ebc)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

matchbox-session-sato: do not rdepend on initscripts

Previously, matchbox-session-sato depended on initscripts, thus resulting
in initscripts package built and installed in case of systemd init manager.

But there is actually no dependency between them. So this patch removes
the dependency.

[YOCTO #3940]

(From OE-Core rev: 8fbf22ef856a68e4f2e9ddabe33334f60616e16c)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

shadow: remove grpconv argc check

The patched version of grpconv takes arguments but the check on
argc was not removed. This patch removes this check which
otherwise results in a spurious warning during rootfs creation.

(From OE-Core rev: 845a24e78835e93807cfb810fa99715ac4d14e21)

Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel.bbclass: Add missing modules.order and modules.builtins

When running depmod, from kmod, warnings about missing modules.order
and modules.builtins occur.  Looking back it is not clear why these
files were being ignored, other then nobody knew what to do with them.

Add the files into the kernel-base package, if they exist, ensuring
they will always get installed if at least one module is installed.

[ YOCTO #3963 ]

(From OE-Core rev: bff4bda1fe86ddd218a192a14605924205a5300b)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Update pseudo to 1.5.1

pseudo 1.5's enable-force-async works great, unless you use a host
where, inexplicably, stat(2) reports inconsistent and changing values
for a file's size or times for some time unless a file has been fsynced,
in which case you might want a way to cause an fsync to work.

Also noticed that some recent changes never made it into the docs, so
I did a little cleanup there. And changed the way NDEBUG suppresses
pseudo's debug messages, so arguments to them with possible side
effects (like calls into functions in another translation unit) can be
omitted, which should drastically reduce computational time if anyone
ever uses NDEBUG.

(From OE-Core rev: 150174d52adefdefe62e2ed0598665481591e4c2)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

v86d: compile against userspace safe kernel headers

v86d was building directly against the staged kernel in the target
sysroot. This has been fine in the past, but with recent (3.7) changes
to user headers into the "uapi" include structure, there are no longer

Without the preprocesor protection, v86d fails to build against any
kernel with uapi header files.

v86d doesn't actually need the whole kernel tree, the exported headers
are enough to build a working binary. This change sets the v86d variable
to ${STAGING_DIR_HOST}/usr, and once the v86d build adds "include" to the
end of KDIR, we have a valid include path to the target sysroot headers.

This also works for pre-uapi kernel headers, so the change is safe for
most (if not all) kernel's with properly exported headers.

(From OE-Core rev: 8d4256b2c9f782368a16c1458e04ed61fa82691a)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.4: remove cedartrail machine

The cedartrail BSP is no longer support from yocto 1.4, so we remove
it from the tree.

(From OE-Core rev: a1ce9da1feb028bbfd861d075bc3b6fbe3300147)

Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: allow building from fetcher source dir

The linux-yocto recipes themselves always set S="${WORKDIR}/linux" and
arrange for the fetcher default of ${WORKDIR}/git to be renamed before
building.

Part of this rename involves an assumption that the directory used by
the fetcher can be removed as part of the renaming process, or in fact
that renaming is required.

If a derived recipe uses S="${WORKDIR}/git", the checkout phase fails
since the kernel source is removed as part of the processing.

To fix this the code now detects this situation and does not clean the
source directory before renaming the fetcher default (and in fact does
not rename it at all).

(From OE-Core rev: e4ab5efea1a41297f63c96de97270136535b5f0b)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: respect SRC_URI modified branch selection

Although the setting of KBRANCH is the suggested/primary way to interact with
the yocto kern-tools and the fetcher, some users may be more comfortable
modifying the SRC_URI branch parameter directly.

If they do, the tools will not force their branch and build output will be
different then they expect, in non obvious ways.

It's easy enough to detect this scenario, but checking the SRC_URI in the
same way that the git fetcher checks for the branch (and SRCREV). If we take
the value from the SRC_URI and use it directly in the patch/validate/update
routines, we'll stay consistent with KBRANCH if it is used, and also
automatically adapt to a manually changed branch parameter on the SRC_URI.

For all other users, there are no visible or behavioural changes as a result
of this change

(From OE-Core rev: cfce8643ed166b51d7178be173677ea6f527d453)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

iproute2: don't use the kernel header tree

This should compile against the userspace safe kernel headers

(From OE-Core rev: e443887379fae4b4fd70d1cd6f7d0d7f064a2cb1)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman: add header to define in6_addr

Needed because the 3.8 if_bridge.h uses in6_addr before it's defined

(From OE-Core rev: 5c4979b93855a57334fac61455b7563e4a43f8ab)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane.bbclass: Merge linux-gnu entries in machine dictionary and add sh4 machine.

(From OE-Core rev: 6e569c1aa66b2496b18d33803a18b99508152064)

Signed-off-by: Kyle Farnsworth <kyle@farnsworthtech.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs_rpm: move run-postinsts scripts to rpm recipe

Move run-postinsts scripts from rootfs_rpm.bbclass to rpm recipe. That
is the same way for dpkg and opkg to deal the post install scripts.

(From OE-Core rev: 04607b0cd496837f10ef78cf43597ec1d2e13f2e)

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd.bbclass: fix bb.error

NOTE: recipe avahi-ui-0.6.31-r7.0: task do_package: Started
ERROR: %s does not appear in package list, please add it avahi-ui-daemon
ERROR: %s does not appear in package list, please add it avahi-ui-dnsconfd

(From OE-Core rev: 36a2bae816b1abf776d0f1a2b6b2c3d9a861a4ca)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: systemd uses libkmod instead of modprobe, remove dependencies

(From OE-Core rev: 7e73a8eddd93c86863e3ff886984526a2163ca56)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs_deb: remove run-postinsts from ROOTFS_PKGMANAGE

Remove package run-postinsts from ROOTFS_PKGMANAGE. run-postinsts has
already added in ROOTFS_PKGMANAGE_BOOTSTRAP and then added to rootfs
conditionally by checking image feature "package-management".

(From OE-Core rev: 41aad841e93daaf5d174b14b2fec60b786ead4b3)

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sudo : upgrade to 1.8.6p6

(From OE-Core rev: edc4f4c04d1a853137cb3cb2638e23bdcb810833)

Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gconf: update to 3.2.6

remove automake patch as it been fixed upstream

(From OE-Core rev: e2a404f3263337e505b60acd6c7d10be2c915ac9)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

minicom: upgrade to 2.6.2

- all patches removed;
- fixes already integrated in source code;
- gcc4-scope.patch removed as was not enabled;

(From OE-Core rev: b0e41a317791aae943370f4e1affcfae32797c87)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libassuan: upgrade to 2.1.0

- license checksum change due to addition of
"Copyright (C) 2001, 2002, 2012, 2013 g10 Code GmbH"

libassuan-add-pkgconfig-support.patch: adapted to the new version

(From OE-Core rev: 36c16c1037d6c319d06c78405594413d65a2821d)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kconfig-frontends: Update to 3.8

Upstream changed numbering to remove '-', so
extend PV to patch.

(From OE-Core rev: a5de18a79033960a5dff441694fae5fdb5e56d7f)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

resolvconf: Update to 1.70

(From OE-Core rev: 7c5bc3535b7f5b8d50004b677b6455ffbf175976)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

file: Update to 5.13

(From OE-Core rev: c865e471fc88984b8e712c0df8f45dc9a30619fb)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lsbinitscripts: Update to 9.44

(From OE-Core rev: 910d37ae5a42c1a4e696cfde48ba9b209d8c3a78)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

man-pages: Update to 3.47

(From OE-Core rev: 86d41fef5c506a0751058054d71bfcc7fe316862)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

boost: Update to 1.53.0

(From OE-Core rev: 3c578f6da565fa7df422ffeb4d1355d3628868a7)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

socat: Update to 1.7.2.1

Changed LIC_FILES_CHKSUM due to whitespace and GNU address difference

(From OE-Core rev: e2294db8e31aacdc27204e0b0fe5ff9221ee768a)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nspr: Update to 4.9.5

Changed LIC_FILES_CHKSUM line numebrs, no license change

(From OE-Core rev: b04f64e10c4b12cf32d6633c402b519067e94e5f)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qt4-embedded: Enable Linux Input support

This allow use of Linux Input directly so being able to use 'evdev'
driver for keyboard use.

(From OE-Core rev: 095a64abaf3b47d7621b2ada7221763c49b8f1ca)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

binutils: Delete recipes for 2.22

We have 2.23.1 as default now.

(From OE-Core rev: a2f5a228422f9807fa21de88ad589853817695f8)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

binutils: Fix build with newer texinfo 5.0+

[Yocto #3943]

(From OE-Core rev: 79a378a47e9a87c42337a846317b556e16e89664)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-core-tools-testapps: connman-client added

connman-client is now part of tools-testapps

(From OE-Core rev: 97c47c9c78d310e0714c3127e8de528f854f58cf)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mini-x-session: Fix starting of x-session

We need to use sudo semantics since it does not start correctly
with su. Added RDEPENDS to ensure it's present on target.

The SESSION_DIR test was constructed incorrectly, so fixed it.

(From OE-Core rev: badf3a32b9737f2ad6f9c9ff2fe623fe17295946)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sqlite: rename version to match upstream versioning change

Upstream changed to a single grouped number, change our numbering
to match thiers.

(From OE-Core rev: 0a00a4328d3fc52ece604f268b7110ef210826a9)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman: enable connman client

connmanctl is available in a new
package: connman-client

(From OE-Core rev: d926de687ba45fed993af7feba8574b76293b939)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

parted: fix several integer overflows

Integer overflows were found in libparted/labels/dvh.c, while attemptting
to assign unsigned int values to int types in some places. These overflows
only can be observed on BE platforms like MIPS, when the "WORDS_BIGENDIAN"
macro is defined in parted.

Defined by unsigned int instead.

(From OE-Core rev: 9acaa764a4df8d589011ff597bba2afc05d6e78b)

Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dbus: set correct address when using --address=systemd:

Patch taken from upstream 1.7 branch.

(From OE-Core rev: d7b8ae19464a3fe87822376b541b3d6865fe6115)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lsbtest: sync test suite packages version

Update file packages_list after sync test suite packages version with
upstream.
Check date: Feb 20, 2103

Bump up PR.

(From OE-Core rev: f43ba5e41ac5c1fe9d6e66fa1a1f8a51f9cd289c)

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management.sh: don't hardcode available sstate_suffixes

Don't hardcode available sstate_suffixes(it misses `packagedata'), find them
dynamically in $sstate_list.

[YOCTO #3635]

(From OE-Core rev: 26adfcb8c33fe62f5e15c3591efc670d70cbb5b7)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management.sh:fix the incorrect usage of option `-d'

The description of option `-d' is not correct in useage. It is used to
remove duplicate and debug at the same time. Use option `-D' to control
debug info output and the option `-d' to flag remove duplicate.

[YOCTO #3635]

(From OE-Core rev: fa0b40c233e757fe986aa45798b35b60b89c879f)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management.sh: fix remove duplicate failed when multiple archs

The implementation of `--remove-duplicated' has been modified by the commit:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=0740f82aea92da0195524e37c372f9981e7f5e6d

In above commit, sstate cache files with multiple archs are not considered
duplicate and don't need to be removed as duplicated any more.

Update the description of `--remove-duplicated' in usage to keep consistent
with implementation.

[YOCTO #3635]

(From OE-Core rev: c201fdc2f01f398060cd953a1640a685797d9e64)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

distrodata: added some corner cases for svn and git repos

distrodata.bbclass: git tags can include only one digit, therefore
the regex that matches the latest version should also include this
case. For some svn repos, using the http protocol than using the
svn protocol to get infomation about revisions works better.

(From OE-Core rev: bbf09cc0abbc81419349f2af1bc1196a868b2269)

Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add kernel arch variable in SDK environment variable list for supporting build external kernel module using SDK

(From OE-Core rev: 7fc7e98801bd72b9662528f94b315749e6075666)

Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

iproute2: upgraded to 3.8.0

- cross-compiling patch adapted to new source code

(From OE-Core rev: 35c2d04911b84cb21ef1a4a00dee399873bee8f3)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dbus-glib : upgrade to 1.100.2

(From OE-Core rev: eb43cd15cc0ceffd6b7fa14919646007d6ba99c2)

Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

e2fsprogs : upgrade to 1.42.7

(From OE-Core rev: 0662191f2e1ac2d686e2125f7f1bcb0f871c0edf)

Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

archive-*-source.bbclass: Handle all package classes

* Add archiver tasks correctly for any 'IMAGE_PKGTYPE'.

[YOCTO #3449]

(From OE-Core rev: 0783686c4dc837674a2bcf3ca1f3f4858e256195)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

archiver class: Use tasks with sstate instead of pre/post funcs

* Add tasks to move sources, script/logs and diff/env files in
  deploy directory.
* Enable SSTATE for 'do_archive_scripts_logs' task
* Enable SSTATE for 'do_dumpdata_create_diff_gz' task
* SSTATE is not used for sources/patches archiver task because source
  archive package can result into a very large file. It will be an
  unnecessary overhead to keep sources in DL_DIR and cached-binaries.
* If 'SOURCE_ARCHIVE_PACKAGE_TYPE' is 'srpm' then use pre/post functions
  because in this case we do not want to use tasks to move sources/logs
  in DEPLOY_DIR. 'do_package_write_rpm' is responsible for handling
  archiver packages.

[YOCTO #3449]

(From OE-Core rev: 959e2ae23ccbc6955a28996d4538e457cd8cfa5e)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

util-linux: Add package for libmount

The libmount shared library was part of util-linux. This caused
util-linux-mount to RDEPEND on util-linux, so including that would
also drag in all of util-linux and all its recommendations.

To break this circular dependency, add a libmount package that holds
the libmount.so.* files, just like the other libraries built by util-
linux.

(From OE-Core rev: 2e79110e31da940728d42411cad3d019d570fc31)

Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

augeas: change SRC_URI

- replace http://augeas.net/download/${BP}.tar.gz with
http://download.augeas.net/${BP}.tar.gz

(From OE-Core rev: 8e69f0ea42505e8f703893e18d73658b83d3b046)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-ust: cannot find -llttng-ust-tracepoint

liblttng_ust.la should depend on liblttng-ust-tracepoint.la, otherwise
there maybe a parallel build issue when building liblttng_ust.la:

ld: cannot find -llttng-ust-tracepoint

[YOCTO #3934]

(From OE-Core rev: b947dbc72b3cd03901112c1bab6ac0b81f1b374f)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: cooker: now that we use a Pool, raise the exceptions

Multiprocessing catches these and handles passing them between processes
itself, we don't need to do it ourselves anymore.

[YOCTO #3926]

(Bitbake rev: 9ca8e513dc142dd7aefadeb6db2ccdb00f38b39f)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: perforce.py: fix the perforce fetcher

The bb.process.run() will return one tuple, e.g:

p4file = ('strA\nStrB\nstrC\n'), then there will be an iteration on p4file:

for i in p4file:
[snip]

The i will be 's t r A ...', this is incorrect. use splitlines() to fix
the problem.

[YOCTO #3619]

(Bitbake rev: b7440fb36b419996046f607e66434ce34722272b)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

siteinfo/insane: More n32 fixups

For perfectly sound reasons, n32 MIPS is a mips64 subset denoted by an
ABI change, thus, "mips64-vendor-linux-gnun32" rather than
"mips-vendor-linux-gnu". A previous change had fixed up insane.bbclass
to recognize these, which mostly worked, but left SITEINFO_BITS set to
64.

Since bit-32 is processed first, and there are specific checks for
linux-gnun32, modify the mips64-linux-gnun32 lines to specify "bit-32",
so things that check SITEINFO_BITS get the right answer. Also, drop
the mips{,el}-linux-gnun32 lines, because that's not a valid combination;
n32 only makes sense for mips64.

Also, the insane.bbclass change spelled "mips64el" as "mipsel64", which
no one noticed because no one's using little-endian n32, apparently.

(From OE-Core rev: 0c243a550f5a0e539823fe168bcc7b2bbb9f19e1)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-argparse: add RDEPENDS on python-textutils

The argparse module uses the textwrapper modules contained in
python-textutils.

(From OE-Core rev: 2e9d39834ceb8cf9d9ba94940372b549fb957028)

Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

base-files: fix 'dash' expanding '\n'

Dash's 'echo' command expands '\n' by default, so the '\n' is not
included in the '/etc/issue' file.

Use 'printf' for portability between different shells.

(From OE-Core rev: 94c9ced84aa201e808e46e129bf14f328ff5f3e4)

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcp-wrappers: add socklen_t.patch

Replace incorrect size_t data type with socket length data type

(From OE-Core rev: c2d456cb79f42eefd50605d72361ded823568d1b)

Signed-off-by: farrah rashid <farrah.rashid@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

meta-skeleton: Add example multilib usages

(From OE-Core rev: 514b0ab066bebd52980467e935c0e5df9e480db4)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gconf: add patch to remove '+' from invalid characters list

This will allow gconftool-2 to run when configuration source addresses
contain the '+' sign.

[YOCTO #3893]

(From OE-Core rev: 5ba4d947189f76692ea6cc75500d9295417a2055)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

install: Look for grub2 files on the initramfs, not rootfs

Fixes [YOCTO #3870] atom-pc - cannot boot image on netbook after install

The problem here is that grub2 is installed but a grub 1 menu.lst is
created at install time. At boot, grub2 doesn't find a grub.cfg file and
drops to the grub shell.

This happens because the installer is looking for 40_custom (a grub2
file) on the rootfs, but grub2 isn't installed on the rootfs. It exists
in the initramfs. Patching the installer to look on the initramfs
resolves the problem.

Note that the problem may have occurred if grub2 used to be installed on
the rootfs but was later removed. In any case, the installer is HORRIBLE
and really needs to be completely redesigned as part of the deployment
effort. For now, this should get the live image installer limping along
again.

Tested on a Toshiba NB-305.

(From OE-Core rev: 8756a19bd24045d41ad20abb581e7872d0fc9ee6)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: alexandru.c.georgescu@intel.com
Cc: sgw@linux.intel.com
Cc: ross.burton@intel.com
Cc: richard.purdie@intel.com
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs_rpm.bbclass: Handle multilib configures with different OS values

[ CQID: WIND00404082 ]

It is possible for the TARGET_OS to change dependending on the multilib used
for a given package build.  mips64 has two potential TARGET_OS values: linux
and linux-gnun32.  The RPM and Smart setup needs to distinguish between the
two otherwise packages of the "non-default" TARGET_OS may be ignored as
incompatible.

(From OE-Core rev: aa760ff7dee4029c30c9de9fc0b640149e4a4c77)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

external-python-tarball: code refactoring

external-python-tarball only can be built when inherit package_ipk now.
Update it to reuse existed populate sdk code that it could be built for
rpm and deb too.

Remove var DEPENDS, SDK_* and flags of do_populate_sdk because they are
already defined in populate_sdk bbclasses.

[Yocto 3006]

(From OE-Core rev: 57134958a2c6b74de8654600e33acdd265966638)

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

genext2fs.inc: Add nativesdk build capability

In order to generate new disk images for ext(2,3,4) which contain root
file systems we do not want to rely on the host's genext2fs which may
have different arguments and features, so allow the nativesdk
genext2fs binary to be built.

(From OE-Core rev: b9eac9683baaeb458d70a5089cbb5e2b8149eb26)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

man: Remove wildcard from SRC_URI

[ CQID: WIND00402802 ]

Remove the wildcard from the SRC_URI.  This causes problems when you .bbappend
and add a FILESEXTRAPATHS entry.  The unpack task may be unable to find the
files to unpack leading to an error.

Avoid wildcards at all costs...

Note, remove both man-1.5m2-multiple.patch and man-1.6e-lzma+xz-support.patch,
they were not being applied in the previous version.  The later also fails to
apply when added to the SRC_URI.

(From OE-Core rev: 61b60906b2825d4f9ea1f5ae11e1f9fcc77ac4e7)

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-dtc: Make KERNEL_DEVICETREE_FLAGS configurable

(From OE-Core rev: f46c5714bc23a50a207c03cc20c3a6aebe8c5df0)

Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libtirpc: upgrade to 0.2.3

- libtirpc-0.2.2-rpc-des-prot.patch removed;
- remove-des-crypt.patch removed;
both included in base distribution.

(From OE-Core rev: c0ff6185e623a40a7378a01d45b2c641ca3fa79d)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs_rpm.bbclass: Reorder feed priority based on multilib image setting

[ YOCTO #3915 ]
[ CQID: WIND00404309 ]

When doing a multilib image build, such as bitbake lib32-core-image-sato, the
system needs to reorder the priority level of the feeds.  If it does not
reorder the priorities, then 64-bit items can be selected by the automatic
dependency resolution in Smart.

(From OE-Core rev: dfbb1aa184955923b85b81aabf944de8f1a1e4b5)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

base-passwd.preinst:fix creating passwd and group error

Create files `passwd' and `group' in `$D${sysconfdir}', if `$D${sysconfdir}'
does not exist, there is an error:
...
cannot create $D${sysconfdir}/passwd: Directory nonexistent
cannot create $D${sysconfdir}/group: Directory nonexistent
...

Attampt to create dir before file creation.

[YOCTO #3917]

(From OE-Core rev: aea1d6c29e0c3f7c854045057d8bb389a1609b2b)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-xf86-config: empty generic xorg.conf

The idea of a generic xorg.conf is meaningless, especially when they specify the
"intel" driver.  Empty this file so that unless the BSP specifies it's own
xorg.conf, no xorg.conf file is installed.

(From OE-Core rev: 746b6e90a8403886e6957d33610bbda115de0a0c)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-xf86-config: don't ship empty xorg.conf

Many hardware platforms can autodetect their hardware and don't need a xorg.conf
at all.  Make it easy for BSPs to not ship a xorg.conf by not installing empty
xorg.conf files.

(From OE-Core rev: 4b46149df5f123c7acf4699dbc552cc0e07f709a)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_deb: check CONFFILES exist before adding them to metadata

dpkg-deb verifies that conffiles exist, so verify that the specified files
actually exist before writing them to conffiles.

This mirrors the behaviour of FILES and package_rpm's CONFFILES handling.

(From OE-Core rev: 767a3d1c45f97add720174a7034df750bfb09a8e)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

hwclock.sh: check for the existence of /etc/default/rcS

/etc/default/rcS might be missing if the init manager is not sysvinit.
So we have to check for the existence of this file before sourcing it.

[YOCTO #3697]

(From OE-Core rev: 416519ec595f59ebeafb95bed2546635cad41559)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ptest: Add missed .debug path

(From OE-Core rev: f8bf3c65327c6e04c19a7dda623c7433f5d97417)

Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gst-plugins-gl: add package recipe

Added notes, signoff, and upstream status to internal patch.

(From OE-Core rev: 76cebb57d3ce507e3876e0a9a881eaa3e8c6fdb8)

Signed-off-by: Jeremy Stashluk <jstashluk@dekaresearch.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

groff: upgrade to 1.22.2

- add code for generating the gnulib configure script
- replace /usr/bin/perl with /usr/bin/env perl

(From OE-Core rev: c205124d135935855b9b479125f5bddce96a2872)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

shared-mime-info: upgrade to 1.1

(From OE-Core rev: eed45b5e22e5fa7b7d6ea7ccf2db36b80f90cd4e)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cairo: upgrade to 1.12.14

(From OE-Core rev: b4c5a95c4c5266c4b3a26addd4ac87bc4a482604)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

augeas: upgrade to 1.0.0

0001-Add-missing-argument-to-escape.patch: removed
    - included in the new version

remove-gets.patch: not needed anymore

add-missing-argz-conditional.patch: added
    - the Makefiles assume that the argz conditional
is present in configure.ac

(From OE-Core rev: a711a8617c39b06c9a494d0ceae9f96f65b024f9)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pulseaudio: upgrade to 3.0

ARM Neon instruction set compilation error fixed.
Build system disables Neon optimisations if
ARM target does not support it.
BT support dependent on bluez and sbc support.
sbc package added as a dependency.

(From OE-Core rev: 4e7b91b5a2613b957b08aefbee1aac28fdd19598)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sbc: Fix PN -> BPN for multilib

(From OE-Core rev: 52bc2abf77aeb0756df758ff2bdfadef170e4558)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sbc: SBC audio codec

recipe added;
needed by pulseaudio.

(From OE-Core rev: fc6375426f9450d803f01b7d4513a0c0a1325e5f)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnome-common: upgrade to 3.7.4

- gnome-common finally is GPLv2+
- omf.patch is included in the new version

(From OE-Core rev: dba2105d2f6f5788d8f827edad4e8c601a409d1f)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xvinfo: upgrade to 1.1.2

(From OE-Core rev: 4a95ac6804e1800ace722ff02b0dfc5a33381735)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>