Jim Meyering [Tue, 9 Oct 2007 07:58:27 +0000 (09:58 +0200)]
Skip the chcon test on a system with no SELinux support.
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
Jim Meyering [Tue, 9 Oct 2007 07:39:13 +0000 (09:39 +0200)]
* src/dircolors.hin: Recognize .lzma as a compressed-file suffix.
Jim Meyering [Tue, 9 Oct 2007 07:37:43 +0000 (09:37 +0200)]
* configure.ac (AM_INIT_AUTOMAKE): Use dist-lzma, rather than dist-bzip2.
Jim Meyering [Tue, 9 Oct 2007 07:33:48 +0000 (09:33 +0200)]
Now that we don't install su, don't make misleading suggestions.
* src/Makefile.am (install-exec-local) [$(INSTALL_SU) != yes]:
Don't suggest running "make install-root".
(uninstall-local) [$(INSTALL_SU) != yes]: Don't even check
the installed binary.
Jim Meyering [Mon, 8 Oct 2007 08:34:04 +0000 (10:34 +0200)]
When forming a truncated name, use the "[...]" prefix even for
an extremely long name in the current directory.
* src/remove.c (full_filename_): Rename a local variable.
Use two separate "truncated" variables, in case the second
call to right_justify does not indicate any truncation -- which
would happen only if the single component FILENAME were longer
than 511 bytes and DIR_NAME were empty.
Jim Meyering [Sun, 7 Oct 2007 20:58:29 +0000 (22:58 +0200)]
rm could malfunction under unusual circumstances:
When operating on a relative name longer than 511 bytes,
and (when either processing a directory that is neither writable
nor readable (but still searchable) or when determining whether
to prompt), and encountering an ENOMEM error while forming the
file name, rm would operate on a truncated-to-511-byte name
starting with "[...]" rather than the intended one.
* NEWS: Describe the bugs.
* src/remove.c: Correct two misuses of full_filename:
(full_filename0, xfull_filename): New functions.
(full_filename_): Rewrite to use full_filename0.
(AD_pop_and_chdir): Use xfull_filename, not full_filename.
(write_protected_non_symlink): Likewise.
Jim Meyering [Sun, 7 Oct 2007 19:55:42 +0000 (21:55 +0200)]
Don't let a helper function modify errno.
* src/remove.c (full_filename_): Save and restore errno.
Spotted by Bruno Haible.
Jim Meyering [Sun, 7 Oct 2007 19:04:14 +0000 (21:04 +0200)]
Reflect 2->3 GPL copyright version update in gnulib.
* gl/lib/tempname.h: Update copyright from gnulib.
* gl/lib/tempname.c: Likewise.
* .x-sc_GPL_version: Don't make an exception for those two files.
Jim Meyering [Sun, 7 Oct 2007 18:33:57 +0000 (20:33 +0200)]
* configure.ac (AM_INIT_AUTOMAKE): Don't use dist-lzma just yet.
Jim Meyering [Sat, 2 Jun 2007 21:04:10 +0000 (23:04 +0200)]
New program: mktemp.
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
Jim Meyering [Sat, 1 Sep 2007 08:33:33 +0000 (10:33 +0200)]
Make tempname more random, via the randint module.
* gl/modules/tempname (Depends-on): Add randint and stdbool.
* gl/lib/tempname.c: Include randint.h and stdbool.h.
(uint64_t): Remove definition. Not needed.
[_LIBC] (RANDOM_BITS): Remove this block, now that we have proper random bits.
(check_x_suffix): New function.
(gen_tempname_len): Rename from __gen_tempname.
Add a parameter, x_suffix_len, telling how many X's there must be at
the end of the template.
Use pseudo-random numbers all the way, rather than adding 7777
from one iteration to the next.
(__gen_tempname): New function, to call gen_tempname_len, requiring a
suffix length of 6.
* gl/lib/tempname.h: Add prototype for gen_tempname_len.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Jim Meyering [Sat, 1 Sep 2007 07:54:45 +0000 (09:54 +0200)]
Convert coreutils' rand*.{c,h,m4} into modules.
First step: move these files to gl/lib:
* lib/rand-isaac.c, lib/rand-isaac.h
* lib/randint.c, lib/randint.h
* lib/randperm.c, lib/randperm.h
* lib/randread.c, lib/randread.h
Step 2: add modules/rand* and remove now-unneeded .m4 files.
* gl/modules/randint: New file.
* gl/modules/randperm: New file.
* gl/modules/randread: New file.
* m4/randint.m4: Remove file.
* m4/randperm.m4: Remove file.
* m4/randread.m4: Remove file.
Step 3: use the new modules
* bootstrap.conf (gnulib_modules): Add randint and randperm.
* m4/prereq.m4 (gl_RANDINT, gl_RANDREAD, gl_RANDPERM): Don't require;
These have been removed.
(gl_ROOT_DEV_INO): Don't require; already handled via bootstrap.conf.
Jim Meyering [Sat, 1 Sep 2007 09:33:00 +0000 (11:33 +0200)]
Copy from gnulib the parts of tempname that we'll modify.
* gl/lib/tempname.c: Copy from gnulib.
* gl/lib/tempname.h: Likewise.
* gl/modules/tempname: Likewise.
Allow GPLv2 on temporarily(?)-imported file from gnulib/libc.
* .x-sc_GPL_version: New file.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version
Jim Meyering [Sun, 7 Oct 2007 16:41:33 +0000 (18:41 +0200)]
Avoid a pseudo-leak in sort.
* src/sort.c (main) [lint]: Avoid a nominal leak.
Jim Meyering [Sun, 7 Oct 2007 16:16:00 +0000 (18:16 +0200)]
Use puts, rather than printf ("%s\n". Slightly cleaner.
* src/tsort.c (tsort): ...and more efficient.
Jim Meyering [Sun, 7 Oct 2007 14:15:49 +0000 (16:15 +0200)]
Avoid seq malfunction on non-POSIX systems: mingw, BeOS, Interix.
* bootstrap.conf (gnulib_modules): Add vasprintf-posix.
Suggestion from Bruno Haible.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Jim Meyering [Sun, 7 Oct 2007 14:06:59 +0000 (16:06 +0200)]
Avoid a used-uninitialized error.
* src/copy.c (copy_internal): Don't overload "use_stat".
Jim Meyering [Fri, 5 Oct 2007 08:55:26 +0000 (10:55 +0200)]
Make a failing cross-partition mv give a sensible diagnostic.
A cross-partition move of a file in a sticky tmpdir and owned by
another user would evoke an invalid diagnostic after copying it:
mv: cannot remove `x': Operation not permitted
Either of the following (mv.c, remove.c) changes would fix the bug by
itself. I think it's slightly better to use both; the added cost is
minimal: mv: an extra lstat-per-mv-cmdline-arg-that-goes-cross-partition,
rm: an extra lstat-per-unlink-that-fails-w/EPERM.
* src/remove.c (remove_entry): Also lstat the file upon EPERM.
* src/mv.c (rm_option_init): Initialize root_dev_ino just as is done
in rm, so that a cross-partition invoked remove.c:rm call works the
same way as one invoked from the command-line use of "rm". That
setting of root_dev_ino makes rm() do the equivalent of an additional
lstat for each argument, which in turn gives rm enough information to
issue the right diagnostic.
* tests/mv/sticky-to-xpart (version): New file. Test for the above.
* tests/mv/Makefile.am (TESTS): Add sticky-to-xpart.
Arrange for "make check-root" to run the new root-only test.
* tests/Makefile.am (tb): New target, to run the new root-only test.
(all_t): Add tb.
* src/c99-to-c89.diff: Adjust offsets.
Jim Meyering [Fri, 5 Oct 2007 10:14:16 +0000 (12:14 +0200)]
Add PACKAGE_VERSION to TESTS_ENVIRONMENT via check.mk.
* tests/check.mk (TESTS_ENVIRONMENT): Add PACKAGE_VERSION here,
rather than in every Makefile.am that needs it.
* tests/rm/Makefile.am (TESTS_ENVIRONMENT): Remove PACKAGE_VERSION.
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Likewise.
Jim Meyering [Fri, 5 Oct 2007 06:58:22 +0000 (08:58 +0200)]
List two systems on which chroot works when run by non-root.
Jim Meyering [Thu, 4 Oct 2007 10:26:38 +0000 (12:26 +0200)]
Adapt to new gnulib naming scheme.
* gl/lib/se-context.in.h: Rename from gl/lib/se-context_.h.
* gl/lib/se-selinux.in.h: Rename from gl/lib/se-selinux_.h.
* gl/m4/selinux-context-h.m4: Remove use of AC_LIBSOURCES.
* gl/m4/selinux-selinux-h.m4: Likewise.
* gl/modules/selinux-h (Files, Makefile.am): Reflect renaming.
(Makefile.am) [lib_SOURCES]: Add se-context.in.h and se-selinux.in.h.
Jim Meyering [Thu, 4 Oct 2007 10:20:27 +0000 (12:20 +0200)]
lib/search_.h: Remove unused file.
Jim Meyering [Thu, 4 Oct 2007 09:55:31 +0000 (11:55 +0200)]
* bootstrap (update_po_files): Work also when there are no .po files in po/.
Jim Meyering [Thu, 4 Oct 2007 09:41:48 +0000 (11:41 +0200)]
* bootstrap (slurp): Adapt to _.h -> .in.h name change.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Jim Meyering [Thu, 4 Oct 2007 08:26:05 +0000 (10:26 +0200)]
Remove test program: lib/t-fpending.c.
* lib/t-fpending.c: Remove file. Now, this test is in gnulib.
* lib/Makefile.am: Remove associated rules.
* .gitignore: Remove lib/t-fpending.
Jim Meyering [Wed, 3 Oct 2007 10:56:32 +0000 (12:56 +0200)]
* tests/misc/selinux: Skip this test if the initial chcon fails.
Jim Meyering [Tue, 2 Oct 2007 09:10:22 +0000 (11:10 +0200)]
Never copy through a symlink that cp has just created.
* src/copy.c (copy_internal): When same-file detection requires
'stat'ing the destination file, also 'lstat' it and ensure that
it wasn't the destination of a preceding copy operation.
This bug was introduced on 2007-06-18.
* tests/cp/abuse: New test for the above.
* tests/cp/Makefile.am (TESTS): Add abuse.
Jim Meyering [Sun, 30 Sep 2007 07:05:10 +0000 (09:05 +0200)]
cp: do not abbreviate in --help output.
* src/cp.c (usage): Don't abbreviate: s/=link/=links/.
Reported by Géraud Meyer in <http://bugs.debian.org/444137>.
Signed-off-by: Jim Meyering <jim@meyering.net>
Eric Blake [Sat, 29 Sep 2007 14:56:50 +0000 (08:56 -0600)]
Fix testsuite on cygwin.
* check.mk (%.log): Also allow suffix-less tests, on platforms
where $(EXEEXT) is not empty.
Signed-off-by: Eric Blake <ebb9@byu.net>
Eric Blake [Sat, 29 Sep 2007 14:49:20 +0000 (08:49 -0600)]
Test previous patch.
* tests/misc/groups-dash: New test.
* tests/misc/Makefile.am (TESTS): Add it.
Signed-off-by: Eric Blake <ebb9@byu.net>
Eric Blake [Fri, 28 Sep 2007 23:09:30 +0000 (23:09 +0000)]
* src/groups.sh: Don't ignore first argument if later argument is --.
Signed-off-by: Eric Blake <ebb9@byu.net>
Jim Meyering [Thu, 27 Sep 2007 20:37:23 +0000 (22:37 +0200)]
Avoid spurious test failure when SELinux stats "selinux/class".
* tests/ls/stat-free-symlinks: Grep for more precise /^stat("x"/.
Jim Meyering [Tue, 25 Sep 2007 20:24:21 +0000 (22:24 +0200)]
Move file-set and hash-triple modules to gnulib.
* bootstrap.conf (gnulib_modules): Remove file-set, now that
it's in gnulib, and the canonicalize module requires it there.
* gl/lib/file-set.c, gl/lib/file-set.h, gl/modules/hash-triple: Remove.
* gl/lib/hash-triple.c, gl/lib/hash-triple.h, gl/modules/file-set: Remove.
Jim Meyering [Mon, 24 Sep 2007 07:53:57 +0000 (09:53 +0200)]
Add a test to exercise a readlink bug.
* tests/misc/readlink-fp-loop: New file. Test for the readlink bug
fixed through today's change to Gnulib's canonicalize module.
* tests/misc/Makefile.am (TESTS): Add readlink-fp-loop.
Bug report and a test case from mpb.mail@gmail.com.
Pádraig Brady [Tue, 25 Sep 2007 17:00:04 +0000 (18:00 +0100)]
Make "Date input formats" easier to find in info file
* doc/coreutils.texi (date invocation):
`man date` gives all options for the date command except
the description of the date input formats. Therefore it
should be easy to browse to this info using `info date`.
Signed-off-by: Pádraig Brady <P@draigBrady.com>
Jim Meyering [Tue, 25 Sep 2007 19:27:14 +0000 (21:27 +0200)]
Use XOR, not OR to combine bits.
* gl/lib/hash-triple.c (triple_hash): Use XOR (^), not OR (|), to
combine the bits from hashing the name and those of the inode number.
Add a few comments and remove out-of-context ones.
Jim Meyering [Mon, 24 Sep 2007 14:33:35 +0000 (16:33 +0200)]
* NEWS: The recent rm-diagnostic fix also affects cross-partition "mv".
Jim Meyering [Mon, 24 Sep 2007 13:09:17 +0000 (15:09 +0200)]
copy.c: Remove definitions of factored-out functions.
* src/copy.c: Include "file-set.h".
(seen_file, record_file): Remove functions that I factored
out on 2007-08-23.
Jim Meyering [Sat, 22 Sep 2007 21:26:37 +0000 (23:26 +0200)]
Don't print the commands of a 10-line script that's run in each subdir.
* tests/check.mk (vc_exe_in_TESTS): Add a leading "@", to reduce noise.
Jim Meyering [Sat, 22 Sep 2007 08:02:09 +0000 (10:02 +0200)]
rm: give a sensible diagnostic when failing to remove a symlink
On some systems (those with openat et al), when rm would fail to
remove a symlink, it would fail with the misleading diagnostic,
"Too many levels of symbolic links".
* NEWS: Mention the bug fix.
* src/remove.c (is_nondir_lstat): New function.
(remove_entry): Use it to catch failed-to-remove symlink (and any
other non-dir) here so that we don't fall through and try to treat
it as directory, which -- with a symlink -- would provoke the bogus
ELOOP failure.
* tests/rm/fail-eacces: Add a test for the above.
* src/c99-to-c89.diff: Adjust offsets.
Jim Meyering [Sat, 22 Sep 2007 06:40:47 +0000 (08:40 +0200)]
rm: fix a tiny, nearly inconsequential bug.
Don't perform a "."-relative lstat, when the file in question
may well not be in ".". Although this is a bug, a few attempts
to exercise it on a linux-2.6.22 system failed. You probably need
a pre-openat system to trigger the failure. The consequence of this
bug would be a lower-quality diagnostic upon failed dir removal.
* src/remove.c (is_dir_lstat): Add a parameter, fd_cwd.
Use it instead of hard-coding AT_FDCWD.
(remove_entry): Call is_dir_lstat with fd_cwd.
Signed-off-by: Jim Meyering <jim@meyering.net>
Karl Berry [Sat, 22 Sep 2007 06:28:21 +0000 (08:28 +0200)]
TODO: It'd be nice to add renice.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Fri, 21 Sep 2007 06:30:26 +0000 (08:30 +0200)]
Avoid a test failure due to now-parallelized tests.
* tests/du/two-args: Run "du .." from a sub-directory one level deeper.
Jim Meyering [Wed, 19 Sep 2007 09:13:46 +0000 (11:13 +0200)]
Fix typo in previous change.
Spotted by Andreas Schwab.
Jim Meyering [Wed, 19 Sep 2007 08:25:40 +0000 (10:25 +0200)]
* coreutils.texi (expr invocation): Correct description of relative
operator precedence. Reported by hanpingtian@gmail.com.
Jim Meyering [Sun, 16 Sep 2007 09:26:24 +0000 (11:26 +0200)]
tests/misc/tac-continue: Arrange to remove a temporary file.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Sun, 16 Sep 2007 09:20:55 +0000 (11:20 +0200)]
tests/check.mk (vc_exe_in_TESTS): Don't rely on the value of $(TESTS),
so that "make check TESTS=test-name" works once again.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Sun, 16 Sep 2007 09:07:59 +0000 (11:07 +0200)]
tests/CuTmpdir.pm: Use File::Find + chmod syscall, not chmod -R.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Sat, 15 Sep 2007 23:24:37 +0000 (01:24 +0200)]
Revamp most test scripts.
Add a ChangeLog entry summarizing the preceding 30+ change sets.
Jim Meyering [Sat, 15 Sep 2007 23:06:16 +0000 (01:06 +0200)]
* tests/rm/v-slash: Avoid test failure with non-C locale.
Reported by Michael Stone.
Jim Meyering [Thu, 13 Sep 2007 10:13:35 +0000 (12:13 +0200)]
Enable some previously omitted test scripts. Add a test cross-check.
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Reenable this test. Adjust for new rm.
* tests/mkdir/Makefile.am: Add writable-under-readonly.
* tests/mkdir/writable-under-readonly: Add some comments.
This test is always skipped, for now.
* tests/Makefile.am (ta): Hook up the new root-only script.
* tests/tail-2/infloop-1: Make this test pass.
* tests/tail-2/Makefile.am (TESTS): Add infloop-1.
* tests/tail-2/fflush: Remove unused file.
* tests/check.mk (vc_executable_is_in_TESTS): More portable.
* tests/check.mk (check): Depend on the above.
* build-aux/check.mk: Remove comment mentioning AUTHORS file.
Jim Meyering [Thu, 13 Sep 2007 08:04:35 +0000 (10:04 +0200)]
Factor out definitions in TESTS_ENVIRONMENT of srcdir, top_srcdir, etc.
tests/check.mk (top_srcdir): Define.
tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir),
$(abs_top_srcdir), and $(abs_top_builddir), since they're
defined via the included tests/check.mk.
Jim Meyering [Thu, 13 Sep 2007 07:22:39 +0000 (09:22 +0200)]
tests/general: Remove from VC, this long-unused directory and contents.
Jim Meyering [Thu, 13 Sep 2007 06:44:26 +0000 (08:44 +0200)]
Adapt tests/tail-2/ to use test-lib.sh.
Jim Meyering [Wed, 12 Sep 2007 16:14:36 +0000 (18:14 +0200)]
Adapt tests/readlink/ to use test-lib.sh.
Jim Meyering [Wed, 12 Sep 2007 13:55:54 +0000 (15:55 +0200)]
Move the sole test in tests/ls-2/ to tests/misc/.
* tests/ls-2/basic-1: Move this file to ...
* tests/misc/ls-misc: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add ls-misc.
* tests/Makefile.am (SUBDIRS): Remove ls-2.
* tests/ls-2: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/ls-2/Makefile.
Jim Meyering [Wed, 12 Sep 2007 12:52:26 +0000 (14:52 +0200)]
More misc, test-related changes. (some to allow running tests as root)
Jim Meyering [Tue, 11 Sep 2007 21:30:49 +0000 (23:30 +0200)]
Move all tests from test/{od,sha1sum,shred,stty} to tests/misc/.
Reflect these renamings:
od/od-N misc/od-N
od/x8 misc/od-x8
sha1sum/basic-1 misc/sha1sum
sha1sum/sample-vec misc/sha1sum-vec
shred/exact misc/shred-exact
shred/remove misc/shred-remove
stty/basic-1 misc/stty
stty/invalid misc/stty-invalid
stty/row-col-1 misc/stty-row-col
* tests/misc/Makefile.am (TESTS): Add the new files.
* tests/Makefile.am (SUBDIRS): Remove the dir names.
* tests/od, tests/sha1sum, tests/shred, tests/stty: Remove the directories.
* configure.ac (AC_CONFIG_FILES): Remove the corresponding Makefile names.
Jim Meyering [Tue, 11 Sep 2007 21:30:09 +0000 (23:30 +0200)]
Move the two tests in tests/tee to tests/misc/.
* tests/tee/basic: Move this file to ...
* tests/misc/tee: ...here. Don't rely on $PROG in env.
* tests/tee/dash: Move this file to ...
* tests/misc/tee-dash: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tee.
* tests/Makefile.am (SUBDIRS): Remove tee.
* tests/tee: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tee/Makefile
Jim Meyering [Mon, 10 Sep 2007 22:43:05 +0000 (00:43 +0200)]
Move the two tests in tests/sum/ to tests/misc/.
* tests/sum/basic-1: Move this file to ...
* tests/misc/sum: ...here. Don't rely on $PROG in env.
* tests/sum/sysv: Move this file to ...
* tests/misc/sum-sysv: ...here. Adapt it to use test-lib.sh.
* tests/misc/Makefile.am (TESTS): Add sum and sum-sysv.
* tests/Makefile.am (SUBDIRS): Remove sum.
* tests/sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/sum/Makefile.
Jim Meyering [Mon, 10 Sep 2007 19:29:46 +0000 (21:29 +0200)]
Move the sole test in tests/tsort/ to tests/misc/tsort.
* tests/tsort/basic-1: Move this file to ...
* tests/misc/tsort: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tsort.
* tests/Makefile.am (SUBDIRS): Remove tsort.
* tests/tsort: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tsort/Makefile.
Jim Meyering [Mon, 10 Sep 2007 17:08:31 +0000 (19:08 +0200)]
Move the sole test in tests/unexpand to tests/misc/unexpand.
* tests/unexpand/basic-1: Move this file to ...
* tests/misc/unexpand: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add unexpand.
* tests/Makefile.am (SUBDIRS): Remove unexpand.
* tests/unexpand: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/unexpand/Makefile.
Jim Meyering [Mon, 10 Sep 2007 17:01:39 +0000 (19:01 +0200)]
Move the sole test in tests/seq to tests/misc/seq.
* tests/seq/basic: Move this file to ...
* tests/misc/seq: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add seq.
* tests/Makefile.am (SUBDIRS): Remove seq.
* tests/seq: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/seq/Makefile
Jim Meyering [Mon, 10 Sep 2007 06:00:39 +0000 (08:00 +0200)]
Convert tests/mkdir/ to use test-lib.sh.
Jim Meyering [Sat, 8 Sep 2007 13:51:25 +0000 (15:51 +0200)]
Move the two tests in tests/md5sum to tests/misc/md5sum.
* tests/md5sum/basic-1: Move this file to ...
* tests/misc/md5sum: ...here. Don't rely on $PROG in env.
* tests/md5sum/newline-1: Move this file to ...
* tests/misc/md5sum-newline: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add md5sum.
* tests/Makefile.am (SUBDIRS): Remove md5sum.
* tests/md5sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/md5sum/Makefile
Jim Meyering [Sat, 8 Sep 2007 13:47:16 +0000 (15:47 +0200)]
tests/sample-test: Update to use test-lib.sh.
Jim Meyering [Sat, 8 Sep 2007 10:26:55 +0000 (12:26 +0200)]
Convert tests/misc/ to use test-lib.sh, too.
Jim Meyering [Sat, 8 Sep 2007 08:09:19 +0000 (10:09 +0200)]
Convert tests/ls/, too.
Jim Meyering [Sat, 8 Sep 2007 07:35:04 +0000 (09:35 +0200)]
Convert tests/ln/, too.
Jim Meyering [Sat, 8 Sep 2007 07:22:49 +0000 (09:22 +0200)]
Convert tests/install/, too.
Jim Meyering [Sat, 8 Sep 2007 06:57:42 +0000 (08:57 +0200)]
Move the two tests in tests/fmt to tests/misc/fmt.
* tests/fmt/basic: Move this file to ...
* tests/misc/fmt: ...here. Don't rely on $PROG in env.
* tests/fmt/long-line: Move this file to ...
* tests/misc/fmt-long-line: ...here.
* tests/misc/Makefile.am (TESTS): Add fmt.
* tests/Makefile.am (SUBDIRS): Remove fmt.
* tests/fmt: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/fmt/Makefile
Jim Meyering [Fri, 7 Sep 2007 21:54:49 +0000 (23:54 +0200)]
Move the sole test in tests/factor to tests/misc/factor.
* tests/factor/basic: Move this file to ...
* tests/misc/factor: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add factor.
* tests/Makefile.am (SUBDIRS): Remove factor.
* tests/factor: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/factor/Makefile
Jim Meyering [Fri, 7 Sep 2007 20:46:52 +0000 (22:46 +0200)]
Move the sole test in tests/expr to tests/misc/expr.
* tests/expr/basic: Move this file to ...
* tests/misc/expr: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add expr.
* tests/Makefile.am (SUBDIRS): Remove expr.
* tests/expr: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/expr/Makefile
Jim Meyering [Fri, 7 Sep 2007 13:25:23 +0000 (15:25 +0200)]
Convert tests/du/*, too.
Jim Meyering [Fri, 7 Sep 2007 12:34:37 +0000 (14:34 +0200)]
Move the sole test in tests/dircolors to tests/misc/dircolors.
* tests/dircolors/simple: Move this file to...
* tests/misc/dircolors: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add dircolors.
* tests/Makefile.am (SUBDIRS): Remove dircolors.
* tests/dircolors: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/dircolors/Makefile
Jim Meyering [Fri, 7 Sep 2007 12:28:47 +0000 (14:28 +0200)]
Convert tests/dd/*, too.
Jim Meyering [Thu, 6 Sep 2007 21:05:16 +0000 (23:05 +0200)]
Convert tests/mv, too.
* tests/other-fs-tmpdir: Before, all callers would exit 77 upon failure to
find the required dir. Now, exit 77 in this script so callers don't have to.
Adjust callers.
Jim Meyering [Thu, 6 Sep 2007 15:34:49 +0000 (17:34 +0200)]
Adjust chgrp, chmod, chown, cp tests to use test-lib.sh.
* tests/check.mk: Also define abs_top_builddir.
Jim Meyering [Thu, 16 Aug 2007 14:28:11 +0000 (16:28 +0200)]
Parallel "make check" support.
* build-aux/check.mk: New file, from The Vaucanson Group.
* .x-sc_GPL_version: New file, to allow "version 2 or later"
in build-aux/check.mk.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version.
* tests/check.mk: New file.
* tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh.
Begin factoring "sample-test" out of test scripts.
* tests/test-lib.sh: New file, to be sourced by all tests that
were previously derived from the "sample-test" template.
* tests/mkdtemp: New file.
* tests/touch/dir-1: Use test-lib.sh.
* tests/touch/empty-file: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/no-rights: Likewise. Also, don't sleep.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
* tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk,
to get the parallel-"make check" bits.
Move a slow test into tests/misc.
* tests/check.mk: Wrapper.
* tests/ls/time-1: Move this file to tests/misc/ls-time.
* tests/misc/ls-time: New file. From tests/ls/time-1.
* tests/ls/Makefile.am (TESTS): Remove time-1.
* tests/misc/Makefile.am (TESTS): Add ls-time.
Jim Meyering [Tue, 14 Aug 2007 08:21:48 +0000 (10:21 +0200)]
Add support for parallel "make check" (in tests/misc, for now)
Jim Meyering [Sat, 15 Sep 2007 06:39:53 +0000 (08:39 +0200)]
* vc-list-files: Remove mercurial support.
Check for CVS first. Adjust comments.
Jim Meyering [Sat, 8 Sep 2007 19:35:23 +0000 (21:35 +0200)]
Accommodate gnulib's renaming: __fpending.h -> fpending.h.
* lib/t-fpending.c: Include "fpending.h", not "__fpending.h".
Jim Meyering [Fri, 7 Sep 2007 08:37:08 +0000 (10:37 +0200)]
chmod: don't ignore a dangling symlink
* NEWS: Mention the bug fix.
* src/chmod.c (process_file): Handle the case of FTS_SLNONE,
i.e., give a diagnostic saying we cannot operate on such a file.
* tests/chmod/thru-dangling: Compare new stderr output with expected.
Bob Proulx [Fri, 7 Sep 2007 08:29:32 +0000 (10:29 +0200)]
Add a test: demonstrate that chmod ignores a dangling symlink
* tests/chmod/thru-dangling: New test. Fails.
* tests/chmod/Makefile.am (TESTS): Add thru-dangling.
Jim Meyering [Wed, 5 Sep 2007 08:57:54 +0000 (10:57 +0200)]
Adapt to new SELinux behavior: "?" vs. new "unlabeled"
* src/ls.c (gobble_file): Interpret the new "unlabeled" indicator
from getfilecon/lgetfilecon the same way we interpret a negative
return value: no security context. So we don't print the "+".
* tests/selinux: Recognize that "unlabeled" means insufficient
support for SELinux, just like "?".
Jim Meyering [Mon, 3 Sep 2007 08:52:49 +0000 (10:52 +0200)]
Run autoconf manually, if needed to get an updated version string.
* GNUmakefile: Don't actually touch configure.ac.
That would make git-version-gen always print "...-dirty".
Jim Meyering [Mon, 3 Sep 2007 08:38:14 +0000 (10:38 +0200)]
Don't change '-'s to '.'s in the string from git-describe.
* build-aux/git-version-gen: Leave '-'s in the string from git-describe.
Otherwise, s/-/./g would make it too hard to distinguish the base
version number from the appended .DD suffixes.
2007-09-03 Jim Meyering <jim@meyering.net>
Jim Meyering [Mon, 3 Sep 2007 07:06:10 +0000 (09:06 +0200)]
README-hacking: Require rsync, rather than wget.
Jim Meyering [Sun, 2 Sep 2007 11:49:49 +0000 (13:49 +0200)]
* bootstrap (WGET_COMMAND): Remove code to set this variable.
Jim Meyering [Sun, 2 Sep 2007 09:37:57 +0000 (11:37 +0200)]
Ensure that $(VERSION) is up to date for dist-related targets.
* GNUmakefile: Arrange to rerun autoconf, if the version reported
by git-version-gen doesn't match $(VERSION), but only for dist targets.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Sun, 2 Sep 2007 07:38:39 +0000 (09:38 +0200)]
bootstrap: uses rsync to download the .po files
* bootstrap (po_download_command_format): New global.
(download_po_files): Use rsync.
(update_po_files): Don't remove .po files after download,
so future rsync runs can take advantage of the copies.
Jim Meyering [Sat, 1 Sep 2007 17:00:09 +0000 (19:00 +0200)]
* bootstrap (gnulib_tool): Make sha1sum check quietly.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Sat, 1 Sep 2007 09:20:53 +0000 (11:20 +0200)]
Ensure that snapshot version changes make it to groups, too.
* src/Makefile.am (groups): Depend on Makefile.
Jim Meyering [Sat, 1 Sep 2007 09:20:42 +0000 (11:20 +0200)]
Make groups-version executable,
* tests/misc/groups-version: ... as it was in the patch.
Eric Blake [Fri, 31 Aug 2007 21:22:24 +0000 (23:22 +0200)]
Test yesterday's change to groups.
* tests/misc/groups-version: New test.
* tests/misc/Makefile.am (TESTS): Add groups-version.
Jim Meyering [Fri, 31 Aug 2007 20:17:53 +0000 (22:17 +0200)]
Solve the unnecessary-.po-file-regeneration problem once and for all.
* bootstrap (download_po_files): New function, renamed from
get_translations. Now, downloads, but doesn't update LINGUAS.
(update_po_files): New function.
Jim Meyering [Thu, 30 Aug 2007 21:13:06 +0000 (23:13 +0200)]
Shorten the snapshot version string by removing the "g".
* build-aux/git-version-gen: Remove git-describe's "g" that would
always precede the abbreviated SHA1. Suggestion from Dmitry V. Levin.
Jim Meyering [Thu, 30 Aug 2007 08:47:11 +0000 (10:47 +0200)]
Perform the s,rm,/bin/rm, fix-up properly. No more kludge.
* Makefile.am (EXTRA_DIST): Remove .kludge-stamp.
(.kludge-stamp): Remove rule. Instead, ...
(dist-hook): Do the job here, operating on the file in $(distdir).
(rm_subst): Adjust regexp to match "rm -f rm$(EXEEXT)", not "rm -f rm".
(MAINTAINERCLEANFILES): s/+=/=/, now that this is the sole use.
(dist-hook): Remove the legacy-from-cvs install-sh is-executable check.
* .gitignore: Remove .kludge-stamp.
Signed-off-by: Jim Meyering <jim@meyering.net>
Jim Meyering [Sat, 25 Aug 2007 22:48:41 +0000 (00:48 +0200)]
Make inter-release --version output more useful.
Now, each snapshot has a version "number" like 6.9-219-g58ddd,
which indicates that it is built using the 219th change set
(in _some_ repository) following the "v6.9" tag, and that 58ddd
is a prefix of the commit SHA1.
* build-aux/git-version-gen: New file.
* configure.ac: Run it to set the version.
* Makefile.am (dist-hook): Arrange so that .version appears only
in distribution tarballs, never in a checked-out repository.
* .gitignore: Add .version here, too. Just in case.
Signed-off-by: Jim Meyering <jim@meyering.net>
Eric Blake [Thu, 30 Aug 2007 03:02:24 +0000 (21:02 -0600)]
* src/.gitignore: Ignore *.exe for platforms with non-empty $(EXEEXT).