David S. Miller [Mon, 29 Jan 2018 02:22:46 +0000 (21:22 -0500)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-26
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) A number of extensions to tcp-bpf, from Lawrence.
- direct R or R/W access to many tcp_sock fields via bpf_sock_ops
- passing up to 3 arguments to bpf_sock_ops functions
- tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
- optionally calling bpf_sock_ops program when RTO fires
- optionally calling bpf_sock_ops program when packet is retransmitted
- optionally calling bpf_sock_ops program when TCP state changes
- access to tclass and sk_txhash
- new selftest
2) div/mod exception handling, from Daniel.
One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.
There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.
After considering _four_ different ways to address the problem,
we adapt the same behavior as on some major archs like ARMv8:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides.
Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary.
3) sockmap sample refactoring, from John.
4) lpm map get_next_key fixes, from Yonghong.
5) test cleanups, from Alexei and Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 28 Jan 2018 15:19:48 +0000 (10:19 -0500)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-01-26
This series contains updates to ixgbe and ixgbevf.
Emil updates ixgbevf to match ixgbe functionality, starting with the
consolidating of functions that represent logical steps in the receive
process so we can later update them more easily. Updated ixgbevf to
only synchronize the length of the frame, which will typically be the
MTU or smaller. Updated the VF driver to use the length of the packet
instead of the DD status bit to determine if a new descriptor is ready
to be processed, which saves on reads and we can save time on
initialization. Added support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING
to help improve performance on some platforms. Updated the VF driver to
do bulk updates of the page reference count instead of just incrementing
it by one reference at a time. Updated the VF driver to only go through
the region of the receive ring that was designated to be cleaned up,
rather than process the entire ring.
Colin Ian King adds the use of ARRAY_SIZE() on various arrays.
Miroslav Lichvar fixes an issue where ethtool was reporting timestamping
filters unsupported for X550, which is incorrect.
Paul adds support for reporting 5G link speed for some devices.
Dan Carpenter fixes a typo where && was used when it should have been
||.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sun, 28 Jan 2018 13:54:38 +0000 (15:54 +0200)]
net/rocker: Remove unreachable return instruction
The "return 0" instruction follows other return instruction
and it makes it impossible to execute, hence remove it.
Fixes:
00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Sat, 27 Jan 2018 01:06:23 +0000 (17:06 -0800)]
Merge branch 'fix-lpm-map'
Yonghong Song says:
====================
A kernel page fault which happens in lpm map trie_get_next_key is reported
by syzbot and Eric. The issue was introduced by commit
b471f2f1de8b
("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map").
Patch #1 fixed the issue in the kernel and patch #2 adds a multithreaded
test case in tools/testing/selftests/bpf/test_lpm_map.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Fri, 26 Jan 2018 23:06:08 +0000 (15:06 -0800)]
tools/bpf: add a multithreaded stress test in bpf selftests test_lpm_map
The new test will spawn four threads, doing map update, delete, lookup
and get_next_key in parallel. It is able to reproduce the issue in the
previous commit found by syzbot and Eric Dumazet.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Fri, 26 Jan 2018 23:06:07 +0000 (15:06 -0800)]
bpf: fix kernel page fault in lpm map trie_get_next_key
Commit
b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command
for LPM_TRIE map") introduces a bug likes below:
if (!rcu_dereference(trie->root))
return -ENOENT;
if (!key || key->prefixlen > trie->max_prefixlen) {
root = &trie->root;
goto find_leftmost;
}
......
find_leftmost:
for (node = rcu_dereference(*root); node;) {
In the code after label find_leftmost, it is assumed
that *root should not be NULL, but it is not true as
it is possbile trie->root is changed to NULL by an
asynchronous delete operation.
The issue is reported by syzbot and Eric Dumazet with the
below error log:
......
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 8033 Comm: syz-executor3 Not tainted 4.15.0-rc8+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:trie_get_next_key+0x3c2/0xf10 kernel/bpf/lpm_trie.c:682
......
This patch fixed the issue by use local rcu_dereferenced
pointer instead of *(&trie->root) later on.
Fixes:
b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command or LPM_TRIE map")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Sat, 27 Jan 2018 00:42:07 +0000 (16:42 -0800)]
Merge branch 'bpf-improvements-and-fixes'
Daniel Borkmann says:
====================
This set contains a small cleanup in cBPF prologue generation and
otherwise fixes an outstanding issue related to BPF to BPF calls
and exception handling. For details please see related patches.
Last but not least, BPF selftests is extended with several new
test cases.
Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:48 +0000 (23:33 +0100)]
bpf: add further test cases around div/mod and others
Update selftests to relfect recent changes and add various new
test cases.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:47 +0000 (23:33 +0100)]
bpf, arm: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from arm32 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:46 +0000 (23:33 +0100)]
bpf, mips64: remove unneeded zero check from div/mod with k
The verifier in both cBPF and eBPF reject div/mod by 0 imm,
so this can never load. Remove emitting such test and reject
it from being JITed instead (the latter is actually also not
needed, but given practice in sparc64, ppc64 today, so
doesn't hurt to add it here either).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Daney <david.daney@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:45 +0000 (23:33 +0100)]
bpf, mips64: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from mips64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Daney <david.daney@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:44 +0000 (23:33 +0100)]
bpf, sparc64: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from sparc64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:43 +0000 (23:33 +0100)]
bpf, ppc64: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from ppc64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:42 +0000 (23:33 +0100)]
bpf, s390x: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from s390x JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:41 +0000 (23:33 +0100)]
bpf, arm64: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from arm64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:40 +0000 (23:33 +0100)]
bpf, x86_64: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from x86_64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:39 +0000 (23:33 +0100)]
bpf: fix subprog verifier bypass by div/mod by 0 exception
One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.
There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.
While trying to work out an exception handling scheme, I also
noticed that programs crafted like the following will currently
pass the verifier:
0: (bf) r6 = r1
1: (85) call pc+8
caller:
R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
callee:
frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_1
10: (b4) (u32) r2 = (u32) 0
11: (b4) (u32) r3 = (u32) 1
12: (3c) (u32) r3 /= (u32) r2
13: (61) r0 = *(u32 *)(r1 +76)
14: (95) exit
returning from callee:
frame1: R0_w=pkt(id=0,off=0,r=0,imm=0)
R1=ctx(id=0,off=0,imm=0) R2_w=inv0
R3_w=inv(id=0,umax_value=
4294967295,var_off=(0x0; 0xffffffff))
R10=fp0,call_1
to caller at 2:
R0_w=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0)
R10=fp0,call_-1
from 14 to 2: R0=pkt(id=0,off=0,r=0,imm=0)
R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
2: (bf) r1 = r6
3: (61) r1 = *(u32 *)(r1 +80)
4: (bf) r2 = r0
5: (07) r2 += 8
6: (2d) if r2 > r1 goto pc+1
R0=pkt(id=0,off=0,r=8,imm=0) R1=pkt_end(id=0,off=0,imm=0)
R2=pkt(id=0,off=8,r=8,imm=0) R6=ctx(id=0,off=0,imm=0)
R10=fp0,call_-1
7: (71) r0 = *(u8 *)(r0 +0)
8: (b7) r0 = 1
9: (95) exit
from 6 to 8: safe
processed 16 insns (limit 131072), stack depth 0+0
Basically what happens is that in the subprog we make use of a
div/mod by 0 exception and in the 'normal' subprog's exit path
we just return skb->data back to the main prog. This has the
implication that the verifier thinks we always get a pkt pointer
in R0 while we still have the implicit 'return 0' from the div
as an alternative unconditional return path earlier. Thus, R0
then contains 0, meaning back in the parent prog we get the
address range of [0x0, skb->data_end] as read and writeable.
Similar can be crafted with other pointer register types.
Since i) BPF_ABS/IND is not allowed in programs that contain
BPF to BPF calls (and generally it's also disadvised to use in
native eBPF context), ii) unknown opcodes don't return zero
anymore, iii) we don't return an exception code in dead branches,
the only last missing case affected and to fix is the div/mod
handling.
What we would really need is some infrastructure to propagate
exceptions all the way to the original prog unwinding the
current stack and returning that code to the caller of the
BPF program. In user space such exception handling for similar
runtimes is typically implemented with setjmp(3) and longjmp(3)
as one possibility which is not available in the kernel,
though (kgdb used to implement it in kernel long time ago). I
implemented a PoC exception handling mechanism into the BPF
interpreter with porting setjmp()/longjmp() into x86_64 and
adding a new internal BPF_ABRT opcode that can use a program
specific exception code for all exception cases we have (e.g.
div/mod by 0, unknown opcodes, etc). While this seems to work
in the constrained BPF environment (meaning, here, we don't
need to deal with state e.g. from memory allocations that we
would need to undo before going into exception state), it still
has various drawbacks: i) we would need to implement the
setjmp()/longjmp() for every arch supported in the kernel and
for x86_64, arm64, sparc64 JITs currently supporting calls,
ii) it has unconditional additional cost on main program
entry to store CPU register state in initial setjmp() call,
and we would need some way to pass the jmp_buf down into
___bpf_prog_run() for main prog and all subprogs, but also
storing on stack is not really nice (other option would be
per-cpu storage for this, but it also has the drawback that
we need to disable preemption for every BPF program types).
All in all this approach would add a lot of complexity.
Another poor-man's solution would be to have some sort of
additional shared register or scratch buffer to hold state
for exceptions, and test that after every call return to
chain returns and pass R0 all the way down to BPF prog caller.
This is also problematic in various ways: i) an additional
register doesn't map well into JITs, and some other scratch
space could only be on per-cpu storage, which, again has the
side-effect that this only works when we disable preemption,
or somewhere in the input context which is not available
everywhere either, and ii) this adds significant runtime
overhead by putting conditionals after each and every call,
as well as implementation complexity.
Yet another option is to teach verifier that div/mod can
return an integer, which however is also complex to implement
as verifier would need to walk such fake 'mov r0,<code>; exit;'
sequeuence and there would still be no guarantee for having
propagation of this further down to the BPF caller as proper
exception code. For parent prog, it is also is not distinguishable
from a normal return of a constant scalar value.
The approach taken here is a completely different one with
little complexity and no additional overhead involved in
that we make use of the fact that a div/mod by 0 is undefined
behavior. Instead of bailing out, we adapt the same behavior
as on some major archs like ARMv8 [0] into eBPF as well:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides. I verified this
also with a test program compiled by gcc and clang, and the
behavior matches with the spec. Going forward we adapt the
eBPF verifier to emit such rewrites once div/mod by register
was seen. cBPF is not touched and will keep existing 'return 0'
semantics. Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary and
this way we would also have the option of more flexibility
from LLVM code generation side (which is then fully visible
to verifier). Thus, this patch i) fixes the panic seen in
above program and ii) doesn't bypass the verifier observations.
[0] ARM Architecture Reference Manual, ARMv8 [ARM DDI 0487B.b]
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487b.b/DDI0487B_b_armv8_arm.pdf
1) aarch64 instruction set: section C3.4.7 and C6.2.279 (UDIV)
"A division by zero results in a zero being written to
the destination register, without any indication that
the division by zero occurred."
2) aarch32 instruction set: section F1.4.8 and F5.1.263 (UDIV)
"For the SDIV and UDIV instructions, division by zero
always returns a zero result."
Fixes:
f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:38 +0000 (23:33 +0100)]
bpf: make unknown opcode handling more robust
Recent findings by syzcaller fixed in
7891a87efc71 ("bpf: arsh is
not supported in 32 bit alu thus reject it") triggered a warning
in the interpreter due to unknown opcode not being rejected by
the verifier. The 'return 0' for an unknown opcode is really not
optimal, since with BPF to BPF calls, this would go untracked by
the verifier.
Do two things here to improve the situation: i) perform basic insn
sanity check early on in the verification phase and reject every
non-uapi insn right there. The bpf_opcode_in_insntable() table
reuses the same mapping as the jumptable in ___bpf_prog_run() sans
the non-public mappings. And ii) in ___bpf_prog_run() we do need
to BUG in the case where the verifier would ever create an unknown
opcode due to some rewrites.
Note that JITs do not have such issues since they would punt to
interpreter in these situations. Moreover, the BPF_JIT_ALWAYS_ON
would also help to avoid such unknown opcodes in the first place.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:37 +0000 (23:33 +0100)]
bpf: improve dead code sanitizing
Given we recently had
c131187db2d3 ("bpf: fix branch pruning
logic") and
95a762e2c8c9 ("bpf: fix incorrect sign extension in
check_alu_op()") in particular where before verifier skipped
verification of the wrongly assumed dead branch, we should not
just replace the dead code parts with nops (mov r0,r0). If there
is a bug such as fixed in
95a762e2c8c9 in future again, where
runtime could execute those insns, then one of the potential
issues with the current setting would be that given the nops
would be at the end of the program, we could execute out of
bounds at some point.
The best in such case would be to just exit the BPF program
altogether and return an exception code. However, given this
would require two instructions, and such a dead code gap could
just be a single insn long, we would need to place 'r0 = X; ret'
snippet at the very end after the user program or at the start
before the program (where we'd skip that region on prog entry),
and then place unconditional ja's into the dead code gap.
While more complex but possible, there's still another block
in the road that currently prevents from this, namely BPF to
BPF calls. The issue here is that such exception could be
returned from a callee, but the caller would not know that
it's an exception that needs to be propagated further down.
Alternative that has little complexity is to just use a ja-1
code for now which will trap the execution here instead of
silently doing bad things if we ever get there due to bugs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 26 Jan 2018 22:33:36 +0000 (23:33 +0100)]
bpf: xor of a/x in cbpf can be done in 32 bit alu
Very minor optimization; saves 1 byte per program in x86_64
JIT in cBPF prologue.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mickaël Salaün [Fri, 26 Jan 2018 00:39:30 +0000 (01:39 +0100)]
samples/bpf: Partially fixes the bpf.o build
Do not build lib/bpf/bpf.o with this Makefile but use the one from the
library directory. This avoid making a buggy bpf.o file (e.g. missing
symbols).
This patch is useful if some code (e.g. Landlock tests) needs both the
bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf).
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lawrence Brakmo [Fri, 26 Jan 2018 20:06:07 +0000 (12:06 -0800)]
bpf: clean up from test_tcpbpf_kern.c
Removed commented lines from test_tcpbpf_kern.c
Fixes:
d6d4f60c3a09 bpf: add selftest for tcpbpf
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Emil Tantilov [Fri, 12 Jan 2018 22:02:56 +0000 (14:02 -0800)]
ixgbe: don't set RXDCTL.RLPML for 82599
commit
2de6aa3a666e ("ixgbe: Add support for padding packet")
Uses RXDCTL.RLPML to limit the maximum frame size on Rx when using
build_skb. Unfortunately that register does not work on 82599.
Added an explicit check to avoid setting this register on 82599 MAC.
Extended the comment related to the setting of RXDCTL.RLPML to better
explain its purpose.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Dan Carpenter [Thu, 11 Jan 2018 21:46:01 +0000 (00:46 +0300)]
ixgbe: Fix && vs || typo
"offset" can't be both 0x0 and 0xFFFF so presumably || was intended
instead of &&. That matches with how this check is done in other
functions.
Fixes:
73834aec7199 ("ixgbe: extend firmware version support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Thu, 11 Jan 2018 14:10:51 +0000 (09:10 -0500)]
ixgbe: add support for reporting 5G link speed
Since 5G link speed is supported by some devices, add reporting of 5G link
speed.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Miroslav Lichvar [Tue, 9 Jan 2018 11:37:05 +0000 (12:37 +0100)]
ixgbe: Don't report unsupported timestamping filters for X550
The current code enables on X550 timestamping of all packets for any
filter, which means ethtool should not report any PTP-specific filters
as unsupported.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Colin Ian King [Sun, 7 Jan 2018 23:17:51 +0000 (23:17 +0000)]
ixgbe: use ARRAY_SIZE for array sizing calculation on array buf
Use the ARRAY_SIZE macro on array buf to determine size of the array.
Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Colin Ian King [Sun, 7 Jan 2018 14:51:46 +0000 (14:51 +0000)]
ixgbevf: use ARRAY_SIZE for various array sizing calculations
Use the ARRAY_SIZE macro on various arrays to determine
size of the arrays. Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:37:31 +0000 (10:37 -0800)]
ixgbevf: don't bother clearing tx_buffer_info in ixgbevf_clean_tx_ring()
In the case of the Tx rings we need to only clear the Tx buffer_info when
we are resetting the rings. Ideally we do this when we configure the ring
to bring it back up instead of when we are taking it down in order to avoid
dirtying pages we don't need to.
In addition we don't need to clear the Tx descriptor ring since we will
fully repopulate it when we begin transmitting frames and next_to_watch can
be cleared to prevent the ring from being cleaned beyond that point instead
of needing to touch anything in the Tx descriptor ring.
Finally with these changes we can avoid having to reset the skb member of
the Tx buffer_info structure in the cleanup path since the skb will always
be associated with the first buffer which has next_to_watch set.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Fri, 26 Jan 2018 16:00:23 +0000 (11:00 -0500)]
Merge branch 'cxgb4-fix-dump-collection-when-firmware-crashed'
Rahul Lakkireddy says:
====================
cxgb4: fix dump collection when firmware crashed
Patch 1 resets FW_OK flag, if firmware reports error.
Patch 2 fixes incorrect condition for using firmware LDST commands.
Patch 3 fixes dump collection logic to use backdoor register
access to collect dumps when firmware is crashed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Fri, 26 Jan 2018 11:35:56 +0000 (17:05 +0530)]
cxgb4: use backdoor access to collect dumps when firmware crashed
Fallback to backdoor register access to collect dumps if firmware
is crashed. Fixes TID, SGE Queue Context, and MPS TCAM dump collection.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Fri, 26 Jan 2018 11:35:55 +0000 (17:05 +0530)]
cxgb4: fix incorrect condition for using firmware LDST commands
Only contact firmware if it's alive _AND_ if use_bd (use backdoor
access) is not set when issuing FW_LDST_CMD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Fri, 26 Jan 2018 11:35:54 +0000 (17:05 +0530)]
cxgb4: reset FW_OK flag on firmware crash
If firmware reports error, reset FW_OK flag.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Jan 2018 15:58:30 +0000 (10:58 -0500)]
Merge branch 'hns3-next'
Peng Li says:
====================
net: hns3: add support ethtool_ops.{set|get}_coalesce for VF
This patch-set adds ethtool_ops.{get|set}_coalesce to VF and
fix one related bug.
HNS3 PF and VF driver use the common enet layer, as the
ethtool_ops.{get|set}_coalesce to PF have upstreamed, just
need add the ops to hns3vf_ethtool_ops.
[Patch 1/2] fix a related bug for the VF ethtool_ops.{set|
get}_coalesce.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fuyun Liang [Fri, 26 Jan 2018 11:31:25 +0000 (19:31 +0800)]
net: hns3: add int_gl_idx setup for VF
Just like PF, if the int_gl_idx of VF does not be set, the default
interrupt coalesce index of VF is 0. But it should be GL1 for TX
queues and GL0 for RX queues.
This patch adds the int_gl_idx setup for VF.
Fixes:
200ecda42598 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fuyun Liang [Fri, 26 Jan 2018 11:31:24 +0000 (19:31 +0800)]
net: hns3: add get/set_coalesce support to VF
This patch adds ethtool_ops.get/set_coalesce support to VF.
Since PF and VF share the same get/set_coalesce interface,
we only need to set hns3_get/set_coalesce to the ethtool_ops
when supporting get/set_coalesce for VF.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Jan 2018 15:49:12 +0000 (10:49 -0500)]
Merge tag 'linux-can-next-for-4.16-
20180126' of ssh://gitolite./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2018-01-26
this is a pull request for net-next/master consisting of 3 patches.
The first two patches target the CAN documentation. The first is by me
and fixes pointer to location of fsl,mpc5200-mscan node in the mpc5200
documentation. The second patch is by Robert Schwebel and it converts
the plain ASCII documentation to restructured text.
The third patch is by Fabrizio Castro add the r8a774[35] support to the
rcar_can dt-bindings documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Emil Tantilov [Mon, 11 Dec 2017 18:37:25 +0000 (10:37 -0800)]
ixgbevf: improve performance and reduce size of ixgbevf_tx_map()
Based on commit
ec718254cbfe
("ixgbe: Improve performance and reduce size of ixgbe_tx_map")
This change is meant to both improve the performance and reduce the size of
ixgbevf_tx_map().
Expand the work done in the main loop by pushing first into tx_buffer.
This allows us to pull in the dma_mapping_error check, the tx_buffer value
assignment, and the initial DMA value assignment to the Tx descriptor.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:37:20 +0000 (10:37 -0800)]
ixgbevf: clear rx_buffer_info in configure instead of clean
Based on commit
d2bead576e67
("igb: Clear Rx buffer_info in configure instead of clean")
This change makes it so that instead of going through the entire ring on Rx
cleanup we only go through the region that was designated to be cleaned up
and stop when we reach the region where new allocations should start.
In addition we can avoid having to perform a memset on the Rx buffer_info
structures until we are about to start using the ring again.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:37:15 +0000 (10:37 -0800)]
ixgbevf: add counters for Rx page allocations
We already had placehloders for failed page and buffer allocations.
Added alloc_rx_page and made sure the stats are properly updated and
exposed in ethtool.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:37:10 +0000 (10:37 -0800)]
ixgbevf: update code to better handle incrementing page count
Based on commit
bd4171a5d4c2
("igb: update code to better handle incrementing page count")
Update the driver code so that we do bulk updates of the page reference
count instead of just incrementing it by one reference at a time. The
advantage to doing this is that we cut down on atomic operations and
this in turn should give us a slight improvement in cycles per packet.
In addition if we eventually move this over to using build_skb the gains
will be more noticeable.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:37:04 +0000 (10:37 -0800)]
ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING
Based on commit
5be5955425c2
("igb: update driver to make use of DMA_ATTR_SKIP_CPU_SYNC")
and
commit
7bd175928280 ("igb: Add support for DMA_ATTR_WEAK_ORDERING")
Convert the calls to dma_map/unmap_page() to the attributes version
and add DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING which should help
improve performance on some platforms.
Move sync_for_cpu call before we perform a prefetch to avoid
invalidating the first 128 bytes of the packet on architectures where
that call may invalidate the cache.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:36:59 +0000 (10:36 -0800)]
ixgbevf: use length to determine if descriptor is done
Based on:
commit
7ec0116c9131 ("igb: Use length to determine if descriptor is done")
This change makes it so that we use the length of the packet instead of the
DD status bit to determine if a new descriptor is ready to be processed.
The obvious advantage is that it cuts down on reads as we don't really even
need the DD bit if going from a 0 to a non-zero value on size is enough to
inform us that the packet has been completed.
In addition we only reset the Rx descriptor length for descriptor zero when
resetting a ring instead of having to do a memset with 0 over the entire
ring. By doing this we can save some time on initialization.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:36:54 +0000 (10:36 -0800)]
ixgbevf: only DMA sync frame length
Based on commit
64f2525ca4e7 ("igb: Only DMA sync frame length")
On some architectures synching a buffer for DMA may be expensive.
Instead of the entire 2K receive buffer only synchronize the length of
the frame, which will typically be the MTU or smaller.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Mon, 11 Dec 2017 18:36:49 +0000 (10:36 -0800)]
ixgbevf: add function for checking if we can reuse page
Introduce ixgbevf_can_reuse_page() similar to the change in ixgbe from
commit
af43da0dba0b
("ixgbe: Add function for checking to see if we can reuse page")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Fri, 26 Jan 2018 15:41:57 +0000 (10:41 -0500)]
Merge branch 'net-smc-fixes-2018-01-26'
Ursula Braun says:
====================
net/smc: fixes 2018-01-26
here are some more smc patches. The first 4 patches take care about
different aspects of smc socket closing, the 5th patch improves
coding style.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 26 Jan 2018 08:28:50 +0000 (09:28 +0100)]
net/smc: return booleans instead of integers
Return statements in functions returning bool should use
true/false instead of 1/0.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 26 Jan 2018 08:28:49 +0000 (09:28 +0100)]
net/smc: release clcsock from tcp_listen_worker
Closing a listen socket may hit the warning
WARN_ON(sock_owned_by_user(sk)) of tcp_close(), if the wake up of
the smc_tcp_listen_worker has not yet finished.
This patch introduces smc_close_wait_listen_clcsock() making sure
the listening internal clcsock has been closed in smc_tcp_listen_work(),
before the listening external SMC socket finishes closing.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 26 Jan 2018 08:28:48 +0000 (09:28 +0100)]
net/smc: replace sock_put worker by socket refcounting
Proper socket refcounting makes the sock_put worker obsolete.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 26 Jan 2018 08:28:47 +0000 (09:28 +0100)]
net/smc: smc_poll improvements
Increase the socket refcount during poll wait.
Take the socket lock before checking socket state.
For a listening socket return a mask independent of state SMC_ACTIVE and
cover errors or closed state as well.
Get rid of the accept_q loop in smc_accept_poll().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 26 Jan 2018 08:28:46 +0000 (09:28 +0100)]
net/smc: handle device, port, and QP error events
RoCE device changes cause an IB event, processed in the global event
handler for the ROCE device. Problems for a certain Queue Pair cause a QP
event, processed in the QP event handler for this QP.
Among those events are port errors and other fatal device errors. All
link groups using such a port or device must be terminated in those cases.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Jan 2018 15:22:53 +0000 (10:22 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-01-26
One last patch for this development cycle:
1) Add ESN support for IPSec HW offload.
From Yossef Efraim.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Fri, 26 Jan 2018 08:51:47 +0000 (08:51 +0000)]
sfc: add suffix to large constant in ptp
Fixes:
1280c0f8aafc ("sfc: support second + quarter ns time format for receive datapath")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Jan 2018 15:16:43 +0000 (10:16 -0500)]
Merge branch 'net-ipv6-Add-support-for-ONLINK-flag'
David Ahern says:
====================
net/ipv6: Add support for ONLINK flag
Add support for RTNH_F_ONLINK with ipv6 routes.
First patch moves existing gateway validation into helper. The onlink
flag requires a different set of checks and the existing validation
makes ip6_route_info_create long enough.
Second patch makes the table id and lookup flag an option to
ip6_nh_lookup_table. onlink check needs to verify the gateway without
the RT6_LOOKUP_F_IFACE flag and PBR with VRF means the table id can
vary between the table the route is inserted and the VRF the egress
device is enslaved to.
Third patch adds support for RTNH_F_ONLINK.
I have a set of test cases in a format based on the framework Ido and
Jiri are working on. Once that goes in I will adapt the script and
submit.
v2
- removed table id check. Too constraining for PBR with VRF use cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 26 Jan 2018 00:55:09 +0000 (16:55 -0800)]
net/ipv6: Add support for onlink flag
Similar to IPv4 allow routes to be added with the RTNH_F_ONLINK flag.
The onlink option requires a gateway and a nexthop device. Any unicast
gateway is allowed (including IPv4 mapped addresses and unresolved
ones) as long as the gateway is not a local address and if it resolves
it must match the given device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 26 Jan 2018 00:55:08 +0000 (16:55 -0800)]
net/ipv6: Add flags and table id to ip6_nh_lookup_table
onlink verification needs to do a lookup in potentially different
table than the table in fib6_config and without the RT6_LOOKUP_F_IFACE
flag. Change ip6_nh_lookup_table to take table id and flags as input
arguments. Both verifications want to ignore link state, so add that
flag can stay in the lookup helper.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 26 Jan 2018 00:55:07 +0000 (16:55 -0800)]
net/ipv6: Move gateway validation into helper
Move existing code to validate nexthop into a helper. Follow on patch
adds support for nexthops marked with onlink, and this helper keeps
the complexity of ip6_route_info_create in check.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabrizio Castro [Tue, 7 Nov 2017 15:10:42 +0000 (15:10 +0000)]
dt-bindings: can: rcar_can: document r8a774[35] can support
Document "renesas,can-r8a7743" and "renesas,can-r8a7745" compatible
strings. Since the fallback compatible string ("renesas,rcar-gen2-can")
activates the right code in the driver, no driver change is needed.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Robert Schwebel [Wed, 24 Jan 2018 10:19:11 +0000 (11:19 +0100)]
can: migrate documentation to restructured text
The kernel documentation is now restructured text. Convert the SocketCAN
documentation and include it in the toplevel kernel documentation.
This patch doesn't do any content change.
All references to can.txt in the code are converted to can.rst.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Wed, 24 Jan 2018 11:39:24 +0000 (12:39 +0100)]
Documentation/devicetree: mpc5200.txt: fix pointer to location of fsl,mpc5200-mscan node
This patch fixes the pointer to the location of the fsl,mpc5200-mscan
device tree node binding documentation.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
David Ahern [Thu, 25 Jan 2018 03:37:38 +0000 (19:37 -0800)]
net/ipv4: Allow send to local broadcast from a socket bound to a VRF
Message sends to the local broadcast address (255.255.255.255) require
uc_index or sk_bound_dev_if to be set to an egress device. However,
responses or only received if the socket is bound to the device. This
is overly constraining for processes running in an L3 domain. This
patch allows a socket bound to the VRF device to send to the local
broadcast address by using IP_UNICAST_IF to set the egress interface
with packet receipt handled by the VRF binding.
Similar to IP_MULTICAST_IF, relax the constraint on setting
IP_UNICAST_IF if a socket is bound to an L3 master device. In this
case allow uc_index to be set to an enslaved if sk_bound_dev_if is
an L3 master device and is the master device for the ifindex.
In udp and raw sendmsg, allow uc_index to override the oif if
uc_index master device is oif (ie., the oif is an L3 master and the
index is an L3 slave).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Jan 2018 02:39:43 +0000 (21:39 -0500)]
Merge branch 'net-erspan-add-support-for-openvswitch'
William Tu says:
====================
net: erspan: add support for openvswitch
The first patch refactors the erspan header definitions.
Originally, the erspan fields are defined as a group into a __be16 field,
and use mask and offset to access each field. This is more costly due to
calling ntohs/htons and error-prone. The first patch changes it to use
bitfields. The second patch creates erspan.h in UAPI and move the definition
'struct erspan_metadata' to it for later openvswitch to use. The final patch
introduces the new OVS tunnel key attribute, OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS,
to program both v1 and v2 erspan tunnel for openvswitch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 25 Jan 2018 21:20:11 +0000 (13:20 -0800)]
openvswitch: add erspan version I and II support
The patch adds support for openvswitch to configure erspan
v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added
to uapi as a binary blob to support all ERSPAN v1 and v2's
fields. Note that Previous commit "openvswitch: Add erspan tunnel
support." was reverted since it does not design properly.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 25 Jan 2018 21:20:10 +0000 (13:20 -0800)]
net: erspan: create erspan metadata uapi header
The patch adds a new uapi header file, erspan.h, and moves
the 'struct erspan_metadata' from internal erspan.h to it.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 25 Jan 2018 21:20:09 +0000 (13:20 -0800)]
net: erspan: use bitfield instead of mask and offset
Originally the erspan fields are defined as a group into a __be16 field,
and use mask and offset to access each field. This is more costly due to
calling ntohs/htons. The patch changes it to use bitfields.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Jan 2018 02:23:09 +0000 (21:23 -0500)]
Merge branch 'use-tc_cls_can_offload_and_chain0-throughout-the-drivers'
Jakub Kicinski says:
====================
use tc_cls_can_offload_and_chain0() throughout the drivers
This set makes all drivers use a new tc_cls_can_offload_and_chain0()
helper which will set extack in case TC hw offload flag is disabled.
I chose to keep the new helper which also looks at the chain but
renamed it more appropriately. The rationale being that most drivers
don't accept chains other than 0 and since we have to pass extack
to the helper we can as well pass the entire struct tc_cls_common_offload
and perform the most common checks.
This code makes the assumption that type_data in the callback can
be interpreted as struct tc_cls_common_offload, i.e. the real offload
structure has common part as the first member. This allows us to
make the check once for all classifier types if driver supports
more than one.
v1:
- drop the type validation in nfp and netdevsim.
v2:
- reorder checks in patch 1;
- split other changes from patch 1;
- add the i40e patch in;
- add one more test case - for chain 0 extack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:53 +0000 (14:00 -0800)]
selftests/bpf: check for chain-non-0 extack message
Make sure netdevsim doesn't allow offload of chains other than 0,
and that it reports the expected extack message.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:52 +0000 (14:00 -0800)]
selftests/bpf: check for spurious extacks from the driver
Drivers should not report errors when offload is not forced.
Check stdout and stderr for familiar messages when with no
skip flags and with skip_hw. Check for add, replace, and
destroy.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:51 +0000 (14:00 -0800)]
mlxsw: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:50 +0000 (14:00 -0800)]
i40e: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:49 +0000 (14:00 -0800)]
ixgbe: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:48 +0000 (14:00 -0800)]
bnxt: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:47 +0000 (14:00 -0800)]
mlx5: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:46 +0000 (14:00 -0800)]
cxgb4: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:45 +0000 (14:00 -0800)]
nfp: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:44 +0000 (14:00 -0800)]
netdevsim: use tc_cls_can_offload_and_chain0()
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case
ethtool tc offload flag is not set or chain unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Jan 2018 22:00:43 +0000 (14:00 -0800)]
pkt_cls: add new tc cls helper to check offload flag and chain index
Very few (mlxsw) upstream drivers seem to allow offload of chains
other than 0. Save driver developers typing and add a helper for
checking both if ethtool's TC offload flag is on and if chain is 0.
This helper will set the extack appropriately in both error cases.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mickaël Salaün [Thu, 25 Jan 2018 23:54:02 +0000 (00:54 +0100)]
bpf: Use the IS_FD_ARRAY() macro in map_update_elem()
Make the code more readable.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Fri, 26 Jan 2018 00:41:15 +0000 (16:41 -0800)]
Merge branch 'bpf-more-sock_ops-callbacks'
Lawrence Brakmo says:
====================
This patchset adds support for:
- direct R or R/W access to many tcp_sock fields
- passing up to 4 arguments to sock_ops BPF functions
- tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
- optionally calling sock_ops BPF program when RTO fires
- optionally calling sock_ops BPF program when packet is retransmitted
- optionally calling sock_ops BPF program when TCP state changes
- access to tclass and sk_txhash
- new selftest
v2: Fixed commit message 0/11. The commit is to "bpf-next" but the patch
below used "bpf" and Patchwork didn't work correctly.
v3: Cleaned RTO callback as per Yuchung's comment
Added BPF enum for TCP states as per Alexei's comment
v4: Fixed compile warnings related to detecting changes between TCP
internal states and the BPF defined states.
v5: Fixed comment issues in some selftest files
Fixed accesss issue with u64 fields in bpf_sock_ops struct
v6: Made fixes based on comments form Eric Dumazet:
The field bpf_sock_ops_cb_flags was addded in a hole on 64bit kernels
Field bpf_sock_ops_cb_flags is now set through a helper function
which returns an error when a BPF program tries to set bits for
callbacks that are not supported in the current kernel.
Added a comment indicating that when adding fields to bpf_sock_ops_kern
they should be added before the field named "temp" if they need to be
cleared before calling the BPF function.
v7: Enfornced fields "op" and "replylong[1] .. replylong[3]" not be writable
based on comments form Eric Dumazet and Alexei Starovoitov.
Filled 32 bit hole in bpf_sock_ops struct with sk_txhash based on
comments from Daniel Borkmann.
Removed unused functions (tcp_call_bpf_1arg, tcp_call_bpf_4arg) based
on comments from Daniel Borkmann.
v8: Add commit message 00/12
Add Acked-by as appropriate
v9: Moved the bug fix to the front of the patchset
Changed RETRANS_CB so it is always called (before it was only called if
the retransmit succeeded). It is now called with an extra argument, the
return value of tcp_transmit_skb (0 => success). Based on comments
from Yuchung Cheng.
Added support for reading 2 new fields, sacked_out and lost_out, based on
comments from Yuchung Cheng.
v10: Moved the callback flags from include/uapi/linux/tcp.h to
include/uapi/linux/bpf.h
Cleaned up the test in selftest. Added a timeout so it always completes,
even if the client is not communicating with the server. Made it faster
by removing the sleeps. Made sure it works even when called back-to-back
20 times.
Consists of the following patches:
[PATCH bpf-next v10 01/12] bpf: Only reply field should be writeable
[PATCH bpf-next v10 02/12] bpf: Make SOCK_OPS_GET_TCP size
[PATCH bpf-next v10 03/12] bpf: Make SOCK_OPS_GET_TCP struct
[PATCH bpf-next v10 04/12] bpf: Add write access to tcp_sock and sock
[PATCH bpf-next v10 05/12] bpf: Support passing args to sock_ops bpf
[PATCH bpf-next v10 06/12] bpf: Adds field bpf_sock_ops_cb_flags to
[PATCH bpf-next v10 07/12] bpf: Add sock_ops RTO callback
[PATCH bpf-next v10 08/12] bpf: Add support for reading sk_state and
[PATCH bpf-next v10 09/12] bpf: Add sock_ops R/W access to tclass
[PATCH bpf-next v10 10/12] bpf: Add BPF_SOCK_OPS_RETRANS_CB
[PATCH bpf-next v10 11/12] bpf: Add BPF_SOCK_OPS_STATE_CB
[PATCH bpf-next v10 12/12] bpf: add selftest for tcpbpf
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:16 +0000 (16:14 -0800)]
bpf: add selftest for tcpbpf
Added a selftest for tcpbpf (sock_ops) that checks that the appropriate
callbacks occured and that it can access tcp_sock fields and that their
values are correct.
Run with command: ./test_tcpbpf_user
Adding the flag "-d" will show why it did not pass.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:15 +0000 (16:14 -0800)]
bpf: Add BPF_SOCK_OPS_STATE_CB
Adds support for calling sock_ops BPF program when there is a TCP state
change. Two arguments are used; one for the old state and another for
the new state.
There is a new enum in include/uapi/linux/bpf.h that exports the TCP
states that prepends BPF_ to the current TCP state names. If it is ever
necessary to change the internal TCP state values (other than adding
more to the end), then it will become necessary to convert from the
internal TCP state value to the BPF value before calling the BPF
sock_ops function. There are a set of compile checks added in tcp.c
to detect if the internal and BPF values differ so we can make the
necessary fixes.
New op: BPF_SOCK_OPS_STATE_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:14 +0000 (16:14 -0800)]
bpf: Add BPF_SOCK_OPS_RETRANS_CB
Adds support for calling sock_ops BPF program when there is a
retransmission. Three arguments are used; one for the sequence number,
another for the number of segments retransmitted, and the last one for
the return value of tcp_transmit_skb (0 => success).
Does not include syn-ack retransmissions.
New op: BPF_SOCK_OPS_RETRANS_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:13 +0000 (16:14 -0800)]
bpf: Add sock_ops R/W access to tclass
Adds direct write access to sk_txhash and access to tclass for ipv6
flows through getsockopt and setsockopt. Sample usage for tclass:
bpf_getsockopt(skops, SOL_IPV6, IPV6_TCLASS, &v, sizeof(v))
where skops is a pointer to the ctx (struct bpf_sock_ops).
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:12 +0000 (16:14 -0800)]
bpf: Add support for reading sk_state and more
Add support for reading many more tcp_sock fields
state, same as sk->sk_state
rtt_min same as sk->rtt_min.s[0].v (current rtt_min)
snd_ssthresh
rcv_nxt
snd_nxt
snd_una
mss_cache
ecn_flags
rate_delivered
rate_interval_us
packets_out
retrans_out
total_retrans
segs_in
data_segs_in
segs_out
data_segs_out
lost_out
sacked_out
sk_txhash
bytes_received (__u64)
bytes_acked (__u64)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:11 +0000 (16:14 -0800)]
bpf: Add sock_ops RTO callback
Adds an optional call to sock_ops BPF program based on whether the
BPF_SOCK_OPS_RTO_CB_FLAG is set in bpf_sock_ops_flags.
The BPF program is passed 2 arguments: icsk_retransmits and whether the
RTO has expired.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:10 +0000 (16:14 -0800)]
bpf: Adds field bpf_sock_ops_cb_flags to tcp_sock
Adds field bpf_sock_ops_cb_flags to tcp_sock and bpf_sock_ops. Its primary
use is to determine if there should be calls to sock_ops bpf program at
various points in the TCP code. The field is initialized to zero,
disabling the calls. A sock_ops BPF program can set it, per connection and
as necessary, when the connection is established.
It also adds support for reading and writting the field within a
sock_ops BPF program. Reading is done by accessing the field directly.
However, writing is done through the helper function
bpf_sock_ops_cb_flags_set, in order to return an error if a BPF program
is trying to set a callback that is not supported in the current kernel
(i.e. running an older kernel). The helper function returns 0 if it was
able to set all of the bits set in the argument, a positive number
containing the bits that could not be set, or -EINVAL if the socket is
not a full TCP socket.
Examples of where one could call the bpf program:
1) When RTO fires
2) When a packet is retransmitted
3) When the connection terminates
4) When a packet is sent
5) When a packet is received
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:09 +0000 (16:14 -0800)]
bpf: Support passing args to sock_ops bpf function
Adds support for passing up to 4 arguments to sock_ops bpf functions. It
reusues the reply union, so the bpf_sock_ops structures are not
increased in size.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:08 +0000 (16:14 -0800)]
bpf: Add write access to tcp_sock and sock fields
This patch adds a macro, SOCK_OPS_SET_FIELD, for writing to
struct tcp_sock or struct sock fields. This required adding a new
field "temp" to struct bpf_sock_ops_kern for temporary storage that
is used by sock_ops_convert_ctx_access. It is used to store and recover
the contents of a register, so the register can be used to store the
address of the sk. Since we cannot overwrite the dst_reg because it
contains the pointer to ctx, nor the src_reg since it contains the value
we want to store, we need an extra register to contain the address
of the sk.
Also adds the macro SOCK_OPS_GET_OR_SET_FIELD that calls one of the
GET or SET macros depending on the value of the TYPE field.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:07 +0000 (16:14 -0800)]
bpf: Make SOCK_OPS_GET_TCP struct independent
Changed SOCK_OPS_GET_TCP to SOCK_OPS_GET_FIELD and added 2
arguments so now it can also work with struct sock fields.
The first argument is the name of the field in the bpf_sock_ops
struct, the 2nd argument is the name of the field in the OBJ struct.
Previous: SOCK_OPS_GET_TCP(FIELD_NAME)
New: SOCK_OPS_GET_FIELD(BPF_FIELD, OBJ_FIELD, OBJ)
Where OBJ is either "struct tcp_sock" or "struct sock" (without
quotation). BPF_FIELD is the name of the field in the bpf_sock_ops
struct and OBJ_FIELD is the name of the field in the OBJ struct.
Although the field names are currently the same, the kernel struct names
could change in the future and this change makes it easier to support
that.
Note that adding access to tcp_sock fields in sock_ops programs does
not preclude the tcp_sock fields from being removed as long as we are
willing to do one of the following:
1) Return a fixed value (e.x. 0 or 0xffffffff), or
2) Make the verifier fail if that field is accessed (i.e. program
fails to load) so the user will know that field is no longer
supported.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:06 +0000 (16:14 -0800)]
bpf: Make SOCK_OPS_GET_TCP size independent
Make SOCK_OPS_GET_TCP helper macro size independent (before only worked
with 4-byte fields.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo [Fri, 26 Jan 2018 00:14:05 +0000 (16:14 -0800)]
bpf: Only reply field should be writeable
Currently, a sock_ops BPF program can write the op field and all the
reply fields (reply and replylong). This is a bug. The op field should
not have been writeable and there is currently no way to use replylong
field for indices >= 1. This patch enforces that only the reply field
(which equals replylong[0]) is writeable.
Fixes:
40304b2a1567 ("bpf: BPF support for sock_ops")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rohit Visavalia [Thu, 25 Jan 2018 10:26:14 +0000 (15:56 +0530)]
qed: code indent should use tabs where possible
Issue found by checkpatch.
Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com>
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rohit Visavalia [Thu, 25 Jan 2018 12:58:24 +0000 (18:28 +0530)]
be2net: networking block comments don't use an empty /* line
Resolved Warning: networking block comments don't use an empty /* line,
use /* Comment...
Issue found by checkpatch.
Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 Jan 2018 21:32:28 +0000 (16:32 -0500)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-01-25
Here's one last bluetooth-next pull request for the 4.16 kernel:
- Improved support for Intel controllers
- New set_parity method to serdev (agreed with maintainers to be taken
through bluetooth-next)
- Fix error path in hci_bcm (missing call to serdev close)
- New ID for BCM4343A0 UART controller
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Thu, 25 Jan 2018 07:59:43 +0000 (13:29 +0530)]
cxgb4: fix possible deadlock
t4_wr_mbox_meat_timeout() can be called from both softirq
context and process context, hence protect the mbox with
spin_lock_bh() instead of simple spin_lock()
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 25 Jan 2018 03:45:29 +0000 (19:45 -0800)]
net/ipv6: Do not allow route add with a device that is down
IPv6 allows routes to be installed when the device is not up (admin up).
Worse, it does not mark it as LINKDOWN. IPv4 does not allow it and really
there is no reason for IPv6 to allow it, so check the flags and deny if
device is admin down.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 Jan 2018 21:10:43 +0000 (16:10 -0500)]
Merge branch 'net-smc-more-socket-closing-improvements'
Ursula Braun says:
====================
net/smc: more socket closing improvements
these patches improve the smc behavior for abnormal socket closing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 25 Jan 2018 10:15:36 +0000 (11:15 +0100)]
net/smc: check for healthy link group resp. connections
If a problem for at least one connection of a link group is detected,
the whole link group and all its connections are terminated.
This patch adds a check for healthy link group when trying to reserve
a work request, and checks for healthy connections before starting
a tx worker.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 25 Jan 2018 10:15:35 +0000 (11:15 +0100)]
net/smc: wake up wr_reg_wait when terminating a link group
If a new connection with a new rmb is added to a link group, its
memory region is registered. If a link group is terminated, a pending
registration requires a wake up.
And consolidate setting of tx_flag peer_conn_abort in smc_lgr_terminate().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 25 Jan 2018 10:15:34 +0000 (11:15 +0100)]
net/smc: do not reuse a linkgroup with setup problems
Once a linkgroup is created successfully, it stays alive for a
certain time to service more connections potentially created.
If one of the initialization steps for a new linkgroup fails,
the linkgroup should not be reused by other connections following.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>