Simon Arlott [Mon, 6 Feb 2012 20:57:01 +0000 (17:57 -0300)]
[media] dvb-core: fix DVBFE_ALGO_HW retune bug
Commit 7e07222 breaks DVBFE_ALGO_HW tuning after a retune is requested,
which causes bad tuning on my TBS 6920.
[ 0.769091] pci 0000:06:00.0: [14f1:8852] type 0 class 0x000400
[ 19.733530] CORE cx23885[0]: subsystem: 6920:8888, board: TurboSight TBS 6920 [card=14,autodetected]
[ 762.824912] cx24116_load_firmware: FW version 1.23.86.1
7e0722215a510921cbb73ab4c37477d4dcb91bf8 [media] dvb-core: Don't pass DVBv3 parameters on tune() fops
Although re_tune is set to true when FESTATE_RETUNE occurs, it is never
set back to false which the old code used to do when !FESTATE_RETUNE.
This patch sets re_tune to false if !(state & FESTATE_RETUNE).
$ szap-s2 -a 2 "Channel 5"
reading channels from file '/home/simon/.szap/channels.conf'
zapping to 247 'Channel 5':
delivery DVB-S, modulation QPSK
sat 0, frequency 10964 MHz H, symbolrate
22000000, coderate 5/6, rolloff 0.35
vpid 0x092a, apid 0x092b, sid 0x092d
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eb33 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cec0 | snr eccd | ber
00000000 | unc
00000000 | FE_HAS_LOCK
status 1f | signal cec0 | snr 0000 | ber
00000000 | unc
00000000 | FE_HAS_LOCK
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Masanari Iida [Fri, 3 Feb 2012 12:56:59 +0000 (09:56 -0300)]
[media] [trivial] frontends: Fix typo in tda1004x.c
Correct spelling "alocate" to "allocate" in
drivers/media/dvb/frontends/tda1004x.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:19:53 +0000 (05:19 -0300)]
[media] radio/Kconfig: cleanup
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:18:40 +0000 (05:18 -0300)]
[media] radio-zoltrix: Convert to radio-isa
Tested with v4l2-compliance, but not with actual hardware. Contact the
linux-media mailinglist if you have this card!
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:17:32 +0000 (05:17 -0300)]
[media] radio-typhoon: Convert to radio-isa
Tested with v4l2-compliance, but not with actual hardware. Contact the
linux-media mailinglist if you have this card!
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:16:29 +0000 (05:16 -0300)]
[media] radio-trust: Convert to radio-isa
Tested with v4l2-compliance, but not with actual hardware. Contact the
linux-media mailinglist if you have this card!
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:15:09 +0000 (05:15 -0300)]
[media] radio-terratec: Convert to radio-isa
Tested with v4l2-compliance, but not with actual hardware. Contact the
linux-media mailinglist if you have this card!
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:24:08 +0000 (05:24 -0300)]
[media] radio-rtrack2: Convert to radio-isa
Tested with v4l2-compliance, but not with actual hardware. Contact the
linux-media mailinglist if you have this card!
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 08:00:26 +0000 (05:00 -0300)]
[media] radio-gemtek: Convert to radio-isa
Tested with actual hardware (up to two cards) and the Keene USB FM Transmitter.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 07:58:15 +0000 (04:58 -0300)]
[media] radio-aztech: Convert to radio-isa
Tested with actual hardware and the Keene USB FM Transmitter.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 16 Jan 2012 07:55:10 +0000 (04:55 -0300)]
[media] radio-aimslab: Convert to radio-isa
Tested with actual hardware and the Keene USB FM Transmitter.
Improved the volume handling delays through trial and error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 3 Feb 2012 11:28:56 +0000 (08:28 -0300)]
[media] radio-isa: add framework for ISA radio drivers
We have quite a few ISA radio drivers, which are all very similar.
This framework makes it possible to reduce the code size of those drivers
and makes it much easier to keep them up to date with the latest V4L2 API
developments.
Drivers rewritten to use this framework fully pass the v4l2-compliance tests
and are properly using the ISA bus (so they can be found under /sys/bus/isa).
It is now also possible to support multiple cards using the same driver
(tested with two radio-gemtek cards).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 14 Feb 2012 18:51:56 +0000 (16:51 -0200)]
[media] fintek-cir: add support for newer chip version
Acked-by: Jarod Wilson <jarod@redhat.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Malcolm Priestley [Wed, 1 Feb 2012 21:27:42 +0000 (18:27 -0300)]
[media] it913x v1.25 support different for remotes
Support for different types of remote.
ITE remotes share common device IDs with differently assigned keys.
Two versions of remote maps have been created there are likely to be more.
v1 for all other IDs
v2 for USB_PID_ITETECH_IT9135_9005.
This patch also separates the configuration parts from it913x_identify_state function.
TODO
remotes for HID interfaces.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 13 Jan 2012 14:15:22 +0000 (11:15 -0300)]
[media] hid-core: ignore the Keene FM transmitter
The Keene FM transmitter USB device has the same USB ID as
the Logitech AudioHub Speaker, but it should ignore the hid.
Check if the name is that of the Keene device.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 2 Feb 2012 11:44:40 +0000 (08:44 -0300)]
[media] radio-keene: add a driver for the Keene FM Transmitter
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 27 Jan 2012 19:21:10 +0000 (16:21 -0300)]
[media] vivi: use v4l2_ctrl_subscribe_event
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 27 Jan 2012 19:18:42 +0000 (16:18 -0300)]
[media] v4l2-ctrls: add helper functions for control events
Many drivers just support control events, and most radio drivers just need
to poll for control events. Add some functions to simplify those jobs.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 2 Feb 2012 11:26:20 +0000 (08:26 -0300)]
[media] v4l2-subdev: add start/end messages for log_status
Add the start and end messages for log_status when called from a
subdev device node.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 2 Feb 2012 11:20:53 +0000 (08:20 -0300)]
[media] v4l2: standardize log start/end message
For drivers that properly use the v4l2 framework (i.e. set v4l2_dev in the
video_device struct), the start and end messages of VIDIOC_LOG_STATUS are
now generated automatically. People tended to forget these, but the v4l2-ctl
tool scans for these messages, and it also makes it easier to read the status
output in the kernel log.
The cx18, ivtv and bttv drivers were changed since they no longer need to
log these start/end messages.
In saa7164 two empty log_status functions were removed.
Also added a helper function to v4l2-ctrl.c that can be used as the
vidioc_log_status callback if all you need to do is to log the current control
values. This is now used by pwc and vivi.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Malcolm Priestley [Wed, 1 Feb 2012 21:29:44 +0000 (18:29 -0300)]
[media] IT913X Version 1 and Version 2 keymaps
IT913X V1 V2 keymaps
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Dec 2011 13:40:23 +0000 (10:40 -0300)]
[media] ivtv: add IVTV_IOC_PASSTHROUGH_MODE
With this private ioctl it is possible to use the ivtv decoder without
requiring the dvb/video.h and dvb/audio.h headers.
Eventually support for those DVB APIs will be dropped from ivtv.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Dec 2011 13:33:26 +0000 (10:33 -0300)]
[media] cx18/ddbridge: remove unused headers
The cx18 and ddbridge drivers include linux/dvb/audio.h and video.h
without using them.
Remove those includes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Dec 2011 13:32:53 +0000 (10:32 -0300)]
[media] ivtv: implement new decoder controls
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Dec 2011 13:52:57 +0000 (10:52 -0300)]
[media] Document decoder controls
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Dec 2011 13:46:16 +0000 (10:46 -0300)]
[media] v4l2-ctrls: add new controls for MPEG decoder devices
As discussed during the 2011 V4L-DVB workshop we want to create a proper V4L2
decoder API that replaces the DVBv5 API that has been used until now.
This adds the four controls necessary to be able to switch ivtv over to this
new API.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 24 Nov 2011 12:58:53 +0000 (09:58 -0300)]
[media] ivtv: implement new decoder command ioctls
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 24 Nov 2011 12:55:53 +0000 (09:55 -0300)]
[media] v4l spec: document VIDIOC_(TRY_)DECODER_CMD
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 24 Nov 2011 12:53:43 +0000 (09:53 -0300)]
[media] v4l2: add VIDIOC_(TRY_)DECODER_CMD
As discussed during the 2011 V4L-DVB workshop, the API in dvb/video.h should
be replaced by a proper V4L2 API. This patch turns the VIDEO_(TRY_)DECODER_CMD
ioctls into proper V4L2 ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Danny Kukawka [Mon, 30 Jan 2012 21:00:06 +0000 (18:00 -0300)]
[media] max2165: trival fix for some -Wuninitialized warning
Fix for some -Wuninitialized compiler warnings.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jesper Juhl [Sun, 29 Jan 2012 19:55:28 +0000 (16:55 -0300)]
[media] easycap: Fix mem leak in easycap_usb_probe()
If allocating 'pdata_urb' fails, the function will return -ENOMEM
without freeing the memory allocated, just a few lines above, for
'purb' and will leak that memory when 'purb' goes out of scope.
This patch resolves the leak by freeing the allocated storage with
usb_free_urb() before the return.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Masanari Iida [Sun, 29 Jan 2012 11:50:53 +0000 (08:50 -0300)]
[media] [trivial] s5p: Fix typo in mixer_drv.c and hdmi_drv.c
Correct typo "sucessful" to "successful" in
drivers/media/video/s5p-tv/mixer_drv.c
drivers/media/video/s5p-tv/hdmi_drv.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jesper Juhl [Sun, 29 Jan 2012 00:41:52 +0000 (21:41 -0300)]
[media] tm6000: Don't use pointer after freeing it in tm6000_ir_fini()
In tm6000_ir_fini() there seems to be a problem.
rc_unregister_device(ir->rc); calls rc_free_device() on the pointer it is
given, which frees it.
Subsequently the function does:
if (!ir->polling)
__tm6000_ir_int_stop(ir->rc);
and __tm6000_ir_int_stop() dereferences the pointer it is given, which
has already been freed.
and it also does:
tm6000_ir_stop(ir->rc);
which also dereferences the (already freed) pointer.
So, it seems that the call to rc_unregister_device() should be move
below the calls to __tm6000_ir_int_stop() and tm6000_ir_stop(), so
those don't operate on a already freed pointer.
But, I must admit that I don't know this code *at all*, so someone who
knows the code should take a careful look before applying this
patch. It is based purely on inspection of facts of what is beeing
freed where and not at all on understanding what the code does or why.
I don't even have a means to test it, so beyond testing that the
change compiles it has seen no testing what-so-ever.
Anyway, here's a proposed patch.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Malcolm Priestley [Sat, 28 Jan 2012 21:02:34 +0000 (18:02 -0300)]
[media] it913x ver 1.24 Make 0x60 default on version 2 devices
Some version 2 devices have different tuner IDs. ID 0x38
appears to have weak signal strength.
Apply default 0x60 to unknown IDs.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Fri, 27 Jan 2012 21:43:28 +0000 (18:43 -0300)]
[media] mt2063: increase frequency_max to tune channel 69
Increase mt2063 frequency_max to tune to channel 69(858Mhz).
Jose Alberto
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Fri, 27 Jan 2012 21:34:49 +0000 (18:34 -0300)]
[media] drxk: Fix get_tune_settings for DVB-T
DVB-T also use step_size=0.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Masanari Iida [Fri, 27 Jan 2012 14:04:51 +0000 (11:04 -0300)]
[media] [trivial] ov6650: Fix typo
Correct spelling "unspported" to "unsupported" in
drivers/media/video/ov6650.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Masanari Iida [Fri, 27 Jan 2012 12:47:04 +0000 (09:47 -0300)]
[media] [trivial] lmedm04: Fix typo
Correct spelling "reseting" to "resetting" in
drivers/media/dvb/dvb-usb/lmedm04.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 23 Dec 2011 06:28:44 +0000 (03:28 -0300)]
[media] davinci: vpif: remove machine specific header file includes
remove unnecessary inclusion of machine specific header files mach/dm646x.h,
mach/hardware.h from vpif.h and aslo mach/dm646x.h from vpif_display.c
driver which comes in the way of platform code consolidation.
Add linux/i2c.h header file in vpif_types.h which is required for
building.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: LMML <linux-media@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Thu, 26 Jan 2012 23:02:52 +0000 (20:02 -0300)]
[media] az6007: add another Terratec H7 usb id
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 24 Jan 2012 08:24:36 +0000 (05:24 -0300)]
[media] vivi: don't set V4L2_CAP_DEVICE_CAPS for the device_caps field
V4L2_CAP_DEVICE_CAPS is valid for the capabilities field only as per
the spec.
Found with v4l2-compliance.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jesper Juhl [Mon, 23 Jan 2012 21:45:58 +0000 (18:45 -0300)]
[media] drxk_hard: does not need to include linux/version.h
This patch removes the unneeded include.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 21 Jan 2012 14:19:29 +0000 (11:19 -0300)]
[media] anysee: repeat failed USB control messages
Control message load increased heavily after CI/CAM support due
to dvb_ca_en50221. It looks like CI/CAM drops to non-working
state easily after error is returned to its callbacks. Due to
that, add some logic to avoid errors repeating failed messages.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 20:13:33 +0000 (18:13 -0200)]
Merge branch 'v4l_for_linus' into staging/for_v3.4
* v4l_for_linus:
[media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions
Josh Wu [Wed, 11 Jan 2012 03:58:29 +0000 (00:58 -0300)]
[media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 20:11:30 +0000 (18:11 -0200)]
Merge branch 'v4l_for_linus' into staging/for_v3.4
* v4l_for_linus:
[media] cxd2820r: sleep on DVB-T/T2 delivery system switch
[media] anysee: fix CI init
[media] cxd2820r: remove unused parameter from cxd2820r_attach
[media] cxd2820r: fix dvb_frontend_ops
Antti Palosaari [Fri, 20 Jan 2012 22:48:28 +0000 (19:48 -0300)]
[media] cxd2820r: sleep on DVB-T/T2 delivery system switch
Fix bug introduced by multi-frontend to single-frontend change.
It is safer to put DVB-T parts sleeping when auto-switching to DVB-T2
and vice versa. That was original behaviour.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 20 Jan 2012 20:39:17 +0000 (17:39 -0300)]
[media] anysee: fix CI init
No more error that error seen when device is plugged:
dvb_ca adapter 0: Invalid PC card inserted :(
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 19 Jan 2012 17:46:43 +0000 (14:46 -0300)]
[media] cxd2820r: remove unused parameter from cxd2820r_attach
Fix bug introduced by multi-frontend to single-frontend change.
This parameter is no longer used after multi-frontend to single-frontend change.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Wed, 18 Jan 2012 16:57:33 +0000 (13:57 -0300)]
[media] cxd2820r: fix dvb_frontend_ops
Fix bug introduced by multi-frontend to single-frontend change.
* Add missing DVB-C caps
* Change frontend name as single frontend does all the standards
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Malcolm Priestley [Fri, 20 Jan 2012 22:07:18 +0000 (19:07 -0300)]
[media] it913x v1.23 use it913x_config.chip_ver to select firmware
As recommended by Jason at ITE, the chip version should select firmware.
However, to continue to support IT9137 firmware with different configuration
the driver will use udev->descriptor.idVendor to select the difference
between IT9135 and IT9137.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 7 Nov 2011 10:25:10 +0000 (07:25 -0300)]
[media] ivtv: setup per-device caps
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 7 Nov 2011 09:53:06 +0000 (06:53 -0300)]
[media] vivi: set device_caps
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 11 Jan 2012 09:45:05 +0000 (06:45 -0300)]
[media] V4L2: Add per-device-node capabilities
If V4L2_CAP_DEVICE_CAPS is set, then the new device_caps field is filled with
the capabilities of the opened device node.
The capabilities field traditionally contains the capabilities of the physical
device, being a superset of all capabilities available at the several device
nodes. E.g., if you open /dev/video0, then if it contains VBI caps then that means
that there is a corresponding vbi node as well. And the capabilities field of
both the video and vbi nodes should contain identical caps.
However, it would be very useful to also have a capabilities field that contains
just the caps for the currently open device, hence the new CAP bit and field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tomi Valkeinen [Tue, 8 Nov 2011 08:47:08 +0000 (05:47 -0300)]
[media] omap_vout: fix section mismatch
Fix the following warning by using platform_driver_probe() instead of
platform_driver_register():
WARNING: drivers/media/video/omap/omap-vout.o(.data+0x24): Section
mismatch in reference from the variable omap_vout_driver to the function
.init.text:omap_vout_probe()
The variable omap_vout_driver references
the function __init omap_vout_probe()
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 15:15:22 +0000 (13:15 -0200)]
[media] cinergyT2-fe: Fix bandwdith settings
Changeset
7830bbaff9f mangled the bandwidth field for CinergyT2.
Properly fill it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 22 Jan 2012 01:23:15 +0000 (23:23 -0200)]
Merge tag 'v3.3-rc1' into staging/for_v3.3
* tag 'v3.3-rc1': (8187 commits)
Linux 3.3-rc1
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
qnx4: don't leak ->BitMap on late failure exits
qnx4: reduce the insane nesting in qnx4_checkroot()
qnx4: di_fname is an array, for crying out loud...
KEYS: Permit key_serial() to be called with a const key pointer
keys: fix user_defined key sparse messages
ima: fix cred sparse warning
uml: fix compile for x86-64
MPILIB: Add a missing ENOMEM check
tpm: fix (ACPI S3) suspend regression
nvme: fix merge error due to change of 'make_request_fn' fn type
xen: using EXPORT_SYMBOL requires including export.h
gpio: tps65910: Use correct offset for gpio initialization
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
tg3: Fix single-vector MSI-X code
openvswitch: Fix multipart datapath dumps.
ipv6: fix per device IP snmp counters
...
Mauro Carvalho Chehab [Sat, 21 Jan 2012 15:52:39 +0000 (13:52 -0200)]
[media] az6007: CodingStyle fixes
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Jul 2011 21:33:26 +0000 (18:33 -0300)]
[media] az6007: Enable the driver at the building system
Add the corresponding entries to allow building this driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 15:41:21 +0000 (12:41 -0300)]
[media] az6007: Use the right keycode for Terratec H7
Instead of using a fake keycode, just for testing, use the
right one, for Terratec H7.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 15:20:30 +0000 (12:20 -0300)]
[media] az6007: Convert IR to use the rc_core logic
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 15:14:13 +0000 (12:14 -0300)]
[media] az6007: Fix IR handling
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 14:53:18 +0000 (11:53 -0300)]
[media] az6007: Be sure to use kmalloc'ed buffer for transfers
USB data transfers may not work if the buffer is allocated at
the stack. Be sure to use kmalloc on all places where a buffer
is needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 14:19:16 +0000 (11:19 -0300)]
[media] az6007: Protect read/write calls with a mutex
This will avoid interference with CI and IR I/O operations.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 13:35:12 +0000 (10:35 -0300)]
[media] az6007: Driver cleanup
Remove commented test code, remove unused poweroff stuff, and
fix the copyright data.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 20 Jan 2012 21:37:01 +0000 (18:37 -0300)]
[media] az6007: code cleanups and fixes
Several changes were needed to make az6007 to work, producing
the same commands as the original driver. This patch does
that.
While here, be less verbose when debug is not enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 21 Jan 2012 10:57:06 +0000 (07:57 -0300)]
[media] drxk: Allow enabling MERR/MVAL cfg
Those two settings are different when used with az6007. Add
a config option to enable it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 20 Jan 2012 22:13:07 +0000 (19:13 -0300)]
[media] drxk: add support for Mpeg output clock drive strength config
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 20 Jan 2012 21:36:26 +0000 (18:36 -0300)]
[media] az6007: Use DRX-K dynamic clock mode
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 20 Jan 2012 21:30:58 +0000 (18:30 -0300)]
[media] drxk: Allow setting it on dynamic_clock mode
This is used on az6007.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 16 Jan 2012 23:37:13 +0000 (20:37 -0300)]
[media] az6007: Use a per device private struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 16 Jan 2012 21:57:51 +0000 (18:57 -0300)]
[media] az6007: Change it to use the MFE solution adopted at dvb-usb
This driver were written to use a previous solution for MFE at dvb-usb.
Due to the internal API changes, change the binding to work with the
new way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 31 Jul 2011 13:11:32 +0000 (10:11 -0300)]
[media] az6007: Use the new MFE support at dvb-usb
Use the newly dvb-usb MFE support added by
changeset
9bd9e3bd2c57530dfe3057dd0aa9bdb37824925d.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 29 Jul 2011 14:40:40 +0000 (11:40 -0300)]
[media] az6007: improve the error messages for az6007 read/write calls
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 29 Jul 2011 14:31:13 +0000 (11:31 -0300)]
[media] az6007: Fix IR receive code
The code still needs to be commented, as there's a mutex
missing at the az6007_read() call. A mutex there is needed,
in order to prevent RC (or CI) calls while other operations
are in progress.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 25 Jul 2011 15:49:46 +0000 (12:49 -0300)]
[media] az6007: Simplify the code by removing an uneeded function
Everything to reset the demod is already at
az6007_frontend_poweron().
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 25 Jul 2011 15:45:16 +0000 (12:45 -0300)]
[media] az6007: Simplify the read/write logic
This patch introduces no functional changes. It basically defines
a macro for each different req found at the driver, and cleans the
code to use them, making easier to understand the code.
With regards to the IR handling code, although the original code
doesn't define what's the request, it is clear, from the USB logs,
that 0xc5 is for IR polling.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 25 Jul 2011 14:17:41 +0000 (11:17 -0300)]
[media] az6007: Change the az6007 read/write routine parameter
Use usb_device for those routines, as it allows using them on
all places. While there, rename to better express the meaning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 25 Jul 2011 14:07:20 +0000 (11:07 -0300)]
[media] az6007: Fix some init sequences and use the right firmwares
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 25 Jul 2011 13:38:20 +0000 (10:38 -0300)]
[media] az6007: need to define drivers name before including dvb-usb.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 24 Jul 2011 12:25:39 +0000 (09:25 -0300)]
[media] drxk: Don't assume a default firmware name
Move the ngene/ddbridge firmware into their drivers.
There are two reasons for that:
1) The firmware used there didn't work for a few devices
I tested here (Terratec H5, H6 and H7);
2) At least Terratec H7 doesn't seem to require a firmware
for it to work.
After this change, if firmware is not specified, the driver will
use a rom-based firmware (this seems to be the case for Terratec
H7, although I need to better check the USB dumps to be sure about
that).
In any case, the firmware seems to be optional, as the DRX-K driver
don't return the firmware load error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 14:54:40 +0000 (11:54 -0300)]
[media] az6007: make driver less verbose
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 14:10:10 +0000 (11:10 -0300)]
[media] az6007: move device PID's to the proper place
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 13:59:25 +0000 (10:59 -0300)]
[media] az6007: Replace the comments at the beginning of the driver
The comments there is wrong.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 13:55:10 +0000 (10:55 -0300)]
[media] az6007: Get rid of az6007.h
The header file serves for no purpose and exports some things
that should be static.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 13:40:08 +0000 (10:40 -0300)]
[media] az6007: CodingStyle cleanup
make checkpatch.pl happy
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 13:12:12 +0000 (10:12 -0300)]
[media] az6007: Remove some dead code that doesn't seem to be needed
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 12:58:38 +0000 (09:58 -0300)]
[media] az6007: Comment the gate_ctl mutex
The mutex is there to protect the I2C gate. However, for some reason,
it is being called twice:
[ 2103.542796] usbcore: registered new interface driver dvb_usb_az6007
[ 2103.772392] az6007: drxk_gate_ctrl: enable
[ 2103.793900] az6007: drxk_gate_ctrl: enable
For now, let's just comment, to allow the driver to run.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 23 Jul 2011 12:51:12 +0000 (09:51 -0300)]
[media] az6007: Fix the I2C code in order to handle mt2063
mt2063 uses a one-byte transfer. This requires a special handling
inside the i2c code. Fix it to properly accept i2c reads. This
is needed to make the mt2063 to be detected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Jul 2011 13:31:25 +0000 (10:31 -0300)]
[media] az6007: Fix it to allow loading it without crash
Add some fixes to allow frontend attachment. The patch is not
complete yet, as just the frontend 0 is initialized. So, more
changes will be needed, including some changes at dvb-usb core.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Jul 2011 21:31:14 +0000 (18:31 -0300)]
[media] az6007: Fix compilation troubles at az6007
Some changes are needed, in order to make az6007 compile with the
upstream tree. Most of the changes are due to the upstream drxk
module.
Even allowing its compilation, the driver is not working yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Jul 2011 20:46:41 +0000 (17:46 -0300)]
[media] dvb: Add a new driver for az6007
Import the az6007 driver from Terratec H7 source, as-is.
It won't compile or run, so latter patches are needed in order
to fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds [Thu, 19 Jan 2012 23:04:48 +0000 (15:04 -0800)]
Linux 3.3-rc1
Linus Torvalds [Thu, 19 Jan 2012 22:53:06 +0000 (14:53 -0800)]
Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/accounting, proc: Fix /proc/stat interrupts sum
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
x86/kprobes: Fix typo transferred from Intel manual
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
x86/kconfig: Move the ZONE_DMA entry under a menu
x86/UV2: Add accounting for BAU strong nacks
x86/UV2: Ack BAU interrupt earlier
x86/UV2: Remove stale no-resources test for UV2 BAU
x86/UV2: Work around BAU bug
x86/UV2: Fix BAU destination timeout initialization
x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
x86: Get rid of dubious one-bit signed bitfield
Linus Torvalds [Thu, 19 Jan 2012 22:52:03 +0000 (14:52 -0800)]
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6
gpio bug fixes for v3.3
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
gpio: tps65910: Use correct offset for gpio initialization
gpio/it8761e: Restrict it8761e gpio driver to x86.
gpio-ml-ioh: cleanup __iomem annotation usage
gpio-ml-ioh: cleanup NULL pointer checking
gpio-pch: cleanup __iomem annotation usage
gpio-pch: cleanup NULL pointer checking
Linus Torvalds [Thu, 19 Jan 2012 22:49:16 +0000 (14:49 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qnx4: don't leak ->BitMap on late failure exits
qnx4: reduce the insane nesting in qnx4_checkroot()
qnx4: di_fname is an array, for crying out loud...
vfs: remove printk from set_nlink()
wake up s_wait_unfrozen when ->freeze_fs fails
H. Peter Anvin [Thu, 19 Jan 2012 20:41:25 +0000 (12:41 -0800)]
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
In checkin
303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables
the feature macros in <asm/unistd.h> were unified between 32 and 64
bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.
Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
H. Peter Anvin [Thu, 19 Jan 2012 20:56:50 +0000 (12:56 -0800)]
Merge remote-tracking branch 'linus/master' into x86/urgent
Linus Torvalds [Thu, 19 Jan 2012 19:46:08 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Permit key_serial() to be called with a const key pointer
keys: fix user_defined key sparse messages
ima: fix cred sparse warning
MPILIB: Add a missing ENOMEM check
Al Viro [Thu, 19 Jan 2012 18:54:36 +0000 (13:54 -0500)]
qnx4: don't leak ->BitMap on late failure exits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>