sched/psi: Fix possible missing or delayed pending event

[ Upstream commit e38f89af6a13e895805febd3a329a13ab7e66fa4 ]

When a pending event exists and growth is less than the threshold, the
current logic is to skip this trigger without generating event. However,
from e6df4ead85d9 ("psi: fix possible trigger missing in the window"),
our purpose is to generate event as long as pending event exists and the
rate meets the limit, no matter what growth is.
This patch handles this case properly.

Fixes: e6df4ead85d9 ("psi: fix possible trigger missing in the window")
Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/r/20220919072356.GA29069@haolee.io
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: fix syscall entry in !AUDUT_SYSCALL case

[ Upstream commit f7b2431a6d22f7a91c567708e071dfcd6d66db14 ]

We only want to take the slow path if SYSCALL_TRACE or SYSCALL_AUDIT is
set; on !AUDIT_SYSCALL configs the current tree hits it whenever _any_
thread flag (including NEED_RESCHED, NOTIFY_SIGNAL, etc.) happens to
be set.

Fixes: a9302e843944 "alpha: Enable system-call auditing support"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: fix TIF_NOTIFY_SIGNAL handling

[ Upstream commit e2c7554cc6d85f95e3c6635f270ec839ab9fe05e ]

it needs to be added to _TIF_WORK_MASK, or we might not reach
do_work_pending() in the first place...

Fixes: 5a9a8897c253a "alpha: add support for TIF_NOTIFY_SIGNAL"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: dt: Return the correct numbers of parsed idle states

[ Upstream commit ee3c2c8ad6ba6785f14a60e4081d7c82e88162a2 ]

While we correctly skips to initialize an idle state from a disabled idle
state node in DT, the returned value from dt_init_idle_driver() don't get
adjusted accordingly. Instead the number of found idle state nodes are
returned, while the callers are expecting the number of successfully
initialized idle states from DT.

This leads to cpuidle drivers unnecessarily continues to initialize their
idle state specific data. Moreover, in the case when all idle states have
been disabled in DT, we would end up registering a cpuidle driver, rather
than relying on the default arch specific idle call.

Fixes: 9f14da345599 ("drivers: cpuidle: implement DT based idle states infrastructure")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition

[ Upstream commit d81304bc6193554014d4372a01debdf65e1e9a4d ]

If the utilization of the woken up task is 0, we skip the energy
calculation because it has no impact.

But if the task is boosted (uclamp_min != 0) will have an impact on task
placement and frequency selection. Only skip if the util is truly
0 after applying uclamp values.

Change uclamp_task_cpu() signature to avoid unnecessary additional calls
to uclamp_eff_get(). feec() is the only user now.

Fixes: 732cd75b8c920 ("sched/fair: Select an energy-efficient CPU on task wake-up")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-8-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make cpu_overutilized() use util_fits_cpu()

[ Upstream commit c56ab1b3506ba0e7a872509964b100912bde165d ]

So that it is now uclamp aware.

This fixes a major problem of busy tasks capped with UCLAMP_MAX keeping
the system in overutilized state which disables EAS and leads to wasting
energy in the long run.

Without this patch running a busy background activity like JIT
compilation on Pixel 6 causes the system to be in overutilized state
74.5% of the time.

With this patch this goes down to  9.79%.

It also fixes another problem when long running tasks that have their
UCLAMP_MIN changed while running such that they need to upmigrate to
honour the new UCLAMP_MIN value. The upmigration doesn't get triggered
because overutilized state never gets set in this state, hence misfit
migration never happens at tick in this case until the task wakes up
again.

Fixes: af24bde8df202 ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-7-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()

[ Upstream commit a2e7f03ed28fce26c78b985f87913b6ce3accf9d ]

Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.

s/asym_fits_capacity/asym_fits_cpu/ to better reflect what it does now.

Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-6-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make select_idle_capacity() use util_fits_cpu()

[ Upstream commit b759caa1d9f667b94727b2ad12589cbc4ce13a82 ]

Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.

Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-5-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Fix fits_capacity() check in feec()

[ Upstream commit 244226035a1f9b2b6c326e55ae5188fab4f428cb ]

As reported by Yun Hsiang [1], if a task has its uclamp_min >= 0.8 * 1024,
it'll always pick the previous CPU because fits_capacity() will always
return false in this case.

The new util_fits_cpu() logic should handle this correctly for us beside
more corner cases where similar failures could occur, like when using
UCLAMP_MAX.

We open code uclamp_rq_util_with() except for the clamp() part,
util_fits_cpu() needs the 'raw' values to be passed to it.

Also introduce uclamp_rq_{set, get}() shorthand accessors to get uclamp
value for the rq. Makes the code more readable and ensures the right
rules (use READ_ONCE/WRITE_ONCE) are respected transparently.

[1] https://lists.linaro.org/pipermail/eas-dev/2020-July/001488.html

Fixes: 1d42509e475c ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Reported-by: Yun Hsiang <hsiang023167@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-4-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make task_fits_capacity() use util_fits_cpu()

[ Upstream commit b48e16a69792b5dc4a09d6807369d11b2970cc36 ]

So that the new uclamp rules in regard to migration margin and capacity
pressure are taken into account correctly.

Fixes: a7008c07a568 ("sched/fair: Make task_fits_capacity() consider uclamp restrictions")
Co-developed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Fix relationship between uclamp and migration margin

[ Upstream commit 48d5e9daa8b767e75ed9421665b037a49ce4bc04 ]

fits_capacity() verifies that a util is within 20% margin of the
capacity of a CPU, which is an attempt to speed up upmigration.

But when uclamp is used, this 20% margin is problematic because for
example if a task is boosted to 1024, then it will not fit on any CPU
according to fits_capacity() logic.

Or if a task is boosted to capacity_orig_of(medium_cpu). The task will
end up on big instead on the desired medium CPU.

Similar corner cases exist for uclamp and usage of capacity_of().
Slightest irq pressure on biggest CPU for example will make a 1024
boosted task look like it can't fit.

What we really want is for uclamp comparisons to ignore the migration
margin and capacity pressure, yet retain them for when checking the
_actual_ util signal.

For example, task p:

p->util_avg = 300
p->uclamp[UCLAMP_MIN] = 1024

Will fit a big CPU. But

p->util_avg = 900
p->uclamp[UCLAMP_MIN] = 1024

will not, this should trigger overutilized state because the big CPU is
now *actually* being saturated.

Similar reasoning applies to capping tasks with UCLAMP_MAX. For example:

p->util_avg = 1024
p->uclamp[UCLAMP_MAX] = capacity_orig_of(medium_cpu)

Should fit the task on medium cpus without triggering overutilized
state.

Inlined comments expand more on desired behavior in more scenarios.

Introduce new util_fits_cpu() function which encapsulates the new logic.
The new function is not used anywhere yet, but will be used to update
various users of fits_capacity() in later patches.

Fixes: af24bde8df202 ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: remove privs in ovl_fallocate()

[ Upstream commit 23a8ce16419a3066829ad4a8b7032a75817af65b ]

Underlying fs doesn't remove privs because fallocate is called with
privileged mounter credentials.

This fixes some failure in fstests generic/683..687.

Fixes: aab8848cee5e ("ovl: add ovl_fallocate()")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: remove privs in ovl_copyfile()

[ Upstream commit b306e90ffabdaa7e3b3350dbcd19b7663e71ab17 ]

Underlying fs doesn't remove privs because copy_range/remap_range are
called with privileged mounter credentials.

This fixes some failures in fstest generic/673.

Fixes: 8ede205541ff ("ovl: add reflink/copyfile/dedup support")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm/tpm_crb: Fix error message in __crb_relinquish_locality()

[ Upstream commit f5264068071964b56dc02c9dab3d11574aaca6ff ]

The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.

Fixes: 888d867df441 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()

[ Upstream commit 2b7d07f7acaac2c7750e420dcf4414588ede6d03 ]

The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.

Fix by unregister ftpm_tee_plat_driver when driver_register() failed.

Fixes: 9f1944c23c8c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: Add flag to use default cancellation policy

[ Upstream commit 7bfda9c73fa9710a842a7d6f89b024351c80c19c ]

The check for cancelled request depends on the VID of the chip, but
some chips share VID which shouldn't share their cancellation
behavior. This is the case for the Nuvoton NPCT75X, which should use
the default cancellation check, not the Winbond one.
To avoid changing the existing behavior, add a new flag to indicate
that the chip should use the default cancellation check and set it
for the I2C TPM2 TIS driver.

Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: tis_i2c: Fix sanity check interrupt enable mask

[ Upstream commit 561d6ef75628db9cce433e573aa3cdb6b3bba903 ]

The sanity check mask for TPM_INT_ENABLE register was off by 8 bits,
resulting in failure to probe if the TPM_INT_ENABLE register was a
valid value.

Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch: arm64: apple: t8103: Use standard "iommu" node name

[ Upstream commit 56d32c51dffac8a431b472a4c31efb8563b048d1 ]

The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.

Fixes: 3c866bb79577 ("arm64: dts: apple: t8103: Add PCIe DARTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP

[ Upstream commit e6b842741b4f39007215fd7e545cb55aa3d358a2 ]

An oops can be induced by running 'cat /proc/kcore > /dev/null' on
devices using pstore with the ram backend because kmap_atomic() assumes
lowmem pages are accessible with __va().

 Unable to handle kernel paging request at virtual address ffffff807ff2b000
 Mem abort info:
 ESR = 0x96000006
 EC = 0x25: DABT (current EL), IL = 32 bits
 SET = 0, FnV = 0
 EA = 0, S1PTW = 0
 FSC = 0x06: level 2 translation fault
 Data abort info:
 ISV = 0, ISS = 0x00000006
 CM = 0, WnR = 0
 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000
 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000
 Internal error: Oops: 96000006 [#1] PREEMPT SMP
 Modules linked in: dm_integrity
 CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba
 Hardware name: Google Lazor (rev3 - 8) (DT)
 pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __memcpy+0x110/0x260
 lr : vread+0x194/0x294
 sp : ffffffc013ee39d0
 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000
 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000
 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000
 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60
 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001
 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b
 x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000
 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78
 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000
 Call trace:
 __memcpy+0x110/0x260
 read_kcore+0x584/0x778
 proc_reg_read+0xb4/0xe4

During early boot, memblock reserves the pages for the ramoops reserved
memory node in DT that would otherwise be part of the direct lowmem
mapping. Pstore's ram backend reuses those reserved pages to change the
memory type (writeback or non-cached) by passing the pages to vmap()
(see pfn_to_page() usage in persistent_ram_vmap() for more details) with
specific flags. When read_kcore() starts iterating over the vmalloc
region, it runs over the virtual address that vmap() returned for
ramoops. In aligned_vread() the virtual address is passed to
vmalloc_to_page() which returns the page struct for the reserved lowmem
area. That lowmem page is passed to kmap_atomic(), which effectively
calls page_to_virt() that assumes a lowmem page struct must be directly
accessible with __va() and friends. These pages are mapped via vmap()
though, and the lowmem mapping was never made, so accessing them via the
lowmem virtual address oopses like above.

Let's side-step this problem by passing VM_IOREMAP to vmap(). This will
tell vread() to not include the ramoops region in the kcore. Instead the
area will look like a bunch of zeros. The alternative is to teach kmap()
about vmalloc areas that intersect with lowmem. Presumably such a change
isn't a one-liner, and there isn't much interest in inspecting the
ramoops region in kcore files anyway, so the most expedient route is
taken for now.

Cc: Brian Geffon <bgeffon@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 404a6043385d ("staging: android: persistent_ram: handle reserving and mapping memory")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221205233136.3420802-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: mmp: fix timer_read delay

[ Upstream commit e348b4014c31041e13ff370669ba3348c4d385e3 ]

timer_read() was using an empty 100-iteration loop to wait for the
TMR_CVWR register to capture the latest timer counter value. The delay
wasn't long enough. This resulted in CPU idle time being extremely
underreported on PXA168 with CONFIG_NO_HZ_IDLE=y.

Switch to the approach used in the vendor kernel, which implements the
capture delay by reading TMR_CVWR a few times instead.

Fixes: 49cbe78637eb ("[ARM] pxa: add base support for Marvell's PXA168 processor line")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-3-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore/ram: Fix error return code in ramoops_probe()

[ Upstream commit e1fce564900f8734edf15b87f028c57e14f6e28d ]

In the if (dev_of_node(dev) && !pdata) path, the "err" may be assigned a
value of 0, so the error return code -EINVAL may be incorrectly set
to 0. To fix set valid return code before calling to goto.

Fixes: 35da60941e44 ("pstore/ram: add Device Tree bindings")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1669969374-46582-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

seccomp: Move copy_seccomp() to no failure path.

[ Upstream commit a1140cb215fa13dcec06d12ba0c3ee105633b7c4 ]

Our syzbot instance reported memory leaks in do_seccomp() [0], similar
to the report [1].  It shows that we miss freeing struct seccomp_filter
and some objects included in it.

We can reproduce the issue with the program below [2] which calls one
seccomp() and two clone() syscalls.

The first clone()d child exits earlier than its parent and sends a
signal to kill it during the second clone(), more precisely before the
fatal_signal_pending() test in copy_process().  When the parent receives
the signal, it has to destroy the embryonic process and return -EINTR to
user space.  In the failure path, we have to call seccomp_filter_release()
to decrement the filter's refcount.

Initially, we called it in free_task() called from the failure path, but
the commit 3a15fb6ed92c ("seccomp: release filter after task is fully
dead") moved it to release_task() to notify user space as early as possible
that the filter is no longer used.

To keep the change and current seccomp refcount semantics, let's move
copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in
free_task() for future debugging.

[0]:
unreferenced object 0xffff8880063add00 (size 256):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s)
  hex dump (first 32 bytes):
    01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
    do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffffc90000035000 (size 4096):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    __vmalloc_node_range (mm/vmalloc.c:3226)
    __vmalloc_node (mm/vmalloc.c:3261 (discriminator 4))
    bpf_prog_alloc_no_stats (kernel/bpf/core.c:91)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888003fa1000 (size 1024):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888006360240 (size 16):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 16 bytes):
    01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff  ..7.verl........
  backtrace:
    bpf_prog_store_orig_filter (net/core/filter.c:1137)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff8880060183e0 (size 8):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 8 bytes):
    06 00 00 00 00 00 ff 7f                          ........
  backtrace:
    kmemdup (mm/util.c:129)
    bpf_prog_store_orig_filter (net/core/filter.c:1144)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[1]: https://syzkaller.appspot.com/bug?id=2809bb0ac77ad9aa3f4afe42d6a610aba594a987

[2]:
#define _GNU_SOURCE
#include <sched.h>
#include <signal.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <linux/filter.h>
#include <linux/seccomp.h>

void main(void)
{
struct sock_filter filter[] = {
BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
};
struct sock_fprog fprog = {
.len = sizeof(filter) / sizeof(filter[0]),
.filter = filter,
};
long i, pid;

syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &fprog);

for (i = 0; i < 2; i++) {
pid = syscall(__NR_clone, CLONE_NEWNET | SIGKILL, NULL, NULL, 0);
if (pid == 0)
return;
}
}

Fixes: 3a15fb6ed92c ("seccomp: release filter after task is fully dead")
Reported-by: syzbot+ab17848fe269b573eb71@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220823154532.82913-1-kuniyu@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/perf: hisi: Fix some event id for hisi-pcie-pmu

[ Upstream commit 6b4bb4f38dbfe85247f006f06135ba46450d5bf0 ]

Some event id of hisi-pcie-pmu is incorrect, fix them.

Fixes: 8404b0fbc7fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: apple: rtkit: Stop casting function pointer signatures

[ Upstream commit 5acf07ff25f0c1c44105e6b8ebf88c55a0a04d2f ]

Fixes: 9bd1d9a0d8bb ("soc: apple: Add RTKit IPC library")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: apple: sart: Stop casting function pointer signatures

[ Upstream commit 422d0b860dc223b5dfc6d083697cae258bb5a4a1 ]

Fixes: b170143ae111 ("soc: apple: Add SART driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC

[ Upstream commit 21aad8ba615e9c39cee6c5d0b76726f63791926c ]

MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: turris-omnia: Add switch port 6 node

[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]

Switch port 6 is connected to eth0, so add appropriate device tree node for it.

Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: turris-omnia: Add ethernet aliases

[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]

This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt7986: move wed_pcie node

[ Upstream commit 99cce13b82a9366cfdd230ba6ddb48ba30d2741f ]

Move the wed_pcie node to have node aligned by address.

Fixes: 00b9903996b3 ("arm64: dts: mediatek: mt7986: add support for Wireless Ethernet Dispatch")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221118190126.100895-2-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix non-prefetchable aperture of PCIe C3 controller

[ Upstream commit 47a2f35d9ea76d92aa2385671f527b75aa9dfe45 ]

Fix the starting address of the non-prefetchable aperture of PCIe C3
controller.

Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix Prefetchable aperture ranges of Tegra234 PCIe controllers

[ Upstream commit 248400656b1cd85de37f3742d065dc1826cdf589 ]

commit edf408b946d3 ("PCI: dwc: Validate iATU outbound mappings against
hardware constraints") exposes an issue with the existing partitioning of
the aperture space where the Prefetchable apertures of controllers
C5, C7 and C9 in Tegra234 cross the 32GB boundary hardware constraint.
This patch makes sure that the Prefetchable region doesn't spill over
the 32GB boundary.

Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name

[ Upstream commit 5f535cc583759c9c60d4cc9b8d221762e2d75387 ]

Update its unit name to oscillator-26m and remove the unneeded unit
address to fix a unit_address_vs_reg warning.

Fixes: 464c510f60c6 ("arm64: dts: mediatek: add mt6797 support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings

[ Upstream commit 509438336ce75c8b4e6ce8e8d507dc77d0783bdd ]

Fix the pinctrl submodes and optee node to remove unneeded unit address,
fixing all unit_address_vs_reg warnings.

Fixes: 9983822c8cf9 ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712-evb: Fix usb vbus regulators unit names

[ Upstream commit ec1ae39a8d25cfb067b5459fac7c5b7b9bce6f6a ]

Update the names to regulator-usb-p{0-3}-vbus to fix unit_address_vs_reg
warnings for those.

Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names

[ Upstream commit 377063156893bf6c088309ac799fe5c6dce2822d ]

Update the names to regulator-vproc-buck{0,1} to fix unit_addres_vs_reg
warnings for those.

Fixes: f75dd8bdd344 ("arm64: dts: mediatek: add mt2712 cpufreq related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712e: Fix unit address for pinctrl node

[ Upstream commit 1d4516f53a611b362db7ba7a8889923d469f57e1 ]

The unit address for the pinctrl node is (0x)1000b000 and not
(0x)10005000, which is the syscfg_pctl_a address instead.

This fixes the following warning:
arch/arm64/boot/dts/mediatek/mt2712e.dtsi:264.40-267.4: Warning
(unique_unit_address): /syscfg_pctl_a@10005000: duplicate
unit-address (also used in node /pinctrl@10005000)

Fixes: f0c64340b748 ("arm64: dts: mt2712: add pintcrl device node.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators

[ Upstream commit e4495a0a8b3d84816c9a46edf3ce060bbf267475 ]

Rename the fixed-clock oscillators to remove the unit address.

This solves unit_address_vs_reg warnings.

Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt6779: Fix devicetree build warnings

[ Upstream commit 4d759c524c15dc4151e40b9e3f368147fda7b789 ]

Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.

This commit fixes the following warnings:

(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"

Fixes: 4c7a6260775d ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt7896a: Fix unit_address_vs_reg warning for oscillator

[ Upstream commit 7898d047b1eb2bec2622668cd70181442a580c6d ]

Rename the oscillator fixed-clock to oscillator-40m and remove
the unit address to fix warnings.

arch/arm64/boot/dts/mediatek/mt7986a.dtsi:17.23-22.4: Warning
(unit_address_vs_reg): /oscillator@0: node has a unit name,
but no reg or ranges property

Fixes: 1f9986b258c2 ("arm64: dts: mediatek: add clock support for mt7986a")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt8195: Fix CPUs capacity-dmips-mhz

[ Upstream commit 513c43328b189874fdfee3ae99cac81e5502e7f7 ]

The capacity-dmips-mhz parameter was miscalculated: this SoC runs
the first (Cortex-A55) cluster at a maximum of 2000MHz and the
second (Cortex-A78) cluster at a maximum of 3000MHz.

In order to calculate the right capacity-dmips-mhz, the following
test was performed:
1. CPUFREQ governor was set to 'performance' on both clusters
2. Ran dhrystone with 500000000 iterations for 10 times on each cluster
3. Calculate the mean result for each cluster
4. Calculate DMIPS/MHz: dmips_mhz = dmips_per_second / cpu_mhz
5. Scale results to 1024:
   result_c0 = (dmips_mhz_c0 - min_dmips_mhz(c0, c1)) /
               (max_dmips_mhz(c0, c1) - min_dmips_mhz(c0, c1)) * 1024

The mean results for this SoC are:
Cluster 0 (LITTLE): 11990400 Dhry/s
Cluster 1 (BIG): 59809036 Dhry/s

The calculated scaled results are:
Cluster 0: 307,934312801831 (rounded to 308)
Cluster 1: 1024

Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221005093404.33102-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes

[ Upstream commit ea3ce4cf076ba11bb591c8013c5315136cae52c8 ]

The unit addresses do not correspond to the nodes' reg properties,
because they don't have any.

Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB")
Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree")
Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC")
Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: microchip: remove pcie node from the sev kit

[ Upstream commit 1150f4cff831e1d7db673417bcb81833d6544cf8 ]

The SEV kit reference design does not hook up the PCIe root port to the
core complex including it is misleading.
The entry is a re-use mistake - I was not aware of this when I moved
the PCIe node out of mpfs.dtsi so that individual bistreams could
connect it to different fics etc.

The node is disabled, so there should be no functional change here.

Fixes: 978a17d1a688 ("riscv: dts: microchip: add sevkit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr

[ Upstream commit b8aa36c22da7d64c5a5d89ccb4a2abb9aeaab2e3 ]

The parent's input irq number is wrongly subtracted with 32 instead of
using the exact numbers in:

https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j721s2/interrupt_cfg.html

The GPIO interrupts are not working because of that. The toggling works
fine but interrupts are not firing. Fix the parent's input irq that
specifies the base for parent irq.

Tested for MAIN_GPIO0_6 interrupt on the j721s2 EVM.

Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20220922072950.9157-1-j-keerthy@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node

[ Upstream commit f00f26711d7183f8675c5591ba8daaabe94be452 ]

crypto driver itself is not dma-coherent. So drop it.

Fixes: d683a73980a6 ("arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-4-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node

[ Upstream commit 26c5012403f3f1fd3bf8f7d3389ee539ae5cc162 ]

crypto driver itself is not dma-coherent. So drop it.

Fixes: 8ebcaaae8017 ("arm64: dts: ti: k3-j721e-main: Add crypto accelerator node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-3-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node

[ Upstream commit b86833ab3653dbb0dc453eec4eef8615e63de4e2 ]

crypto driver itself is not dma-coherent. So drop it.

Fixes: b366b2409c97 ("arm64: dts: ti: k3-am6: Add crypto accelarator node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-2-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()

[ Upstream commit 6f2d566b46436a50a80d6445e82879686b89588c ]

arm_smmu_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20221115115540.6245-3-shangxiaojing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()

[ Upstream commit d9f564c966e63925aac4ba273a9319d7fb6f4b4e ]

dmc620_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 53c218da220c ("driver/perf: Add PMU driver for the ARM DMC-620 memory controller")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20221115115540.6245-2-shangxiaojing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: perf: marvell_cn10k: Fix hotplug callback leak in tad_pmu_init()

[ Upstream commit 973ae93d80d9d262f695eb485a1902b74c4b9098 ]

tad_pmu_init() won't remove the callback added by cpuhp_setup_state_multi()
when platform_driver_register() failed. Remove the callback by
cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 036a7584bede ("drivers: perf: Add LLC-TAD perf counter support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221115070207.32634-3-yuancan@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()

[ Upstream commit facafab7611f7b872c6b9eeaff53461ef11f482e ]

dsu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi()
when platform_driver_register() failed. Remove the callback by
cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 7520fa99246d ("perf: ARM DynamIQ Shared Unit PMU support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221115070207.32634-2-yuancan@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: mm: kfence: only handle translation faults

[ Upstream commit 0bb1fbffc631064db567ccaeb9ed6b6df6342b66 ]

Alexander noted that KFENCE only expects to handle faults from invalid page
table entries (i.e. translation faults), but arm64's fault handling logic will
call kfence_handle_page_fault() for other types of faults, including alignment
faults caused by unaligned atomics. This has the unfortunate property of
causing those other faults to be reported as "KFENCE: use-after-free",
which is misleading and hinders debugging.

Fix this by only forwarding unhandled translation faults to the KFENCE
code, similar to what x86 does already.

Alexander has verified that this passes all the tests in the KFENCE test
suite and avoids bogus reports on misaligned atomics.

Link: https://lore.kernel.org/all/20221102081620.1465154-1-zhongbaisong@huawei.com/
Fixes: 840b23986344 ("arm64, kfence: enable KFENCE for ARM64")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114104411.2853040-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe

[ Upstream commit 69460e68eb662064ab4188d4e129ff31c1f23ed9 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes: 984aa6dbf4ca ("OMAP3: PM: Adding smartreflex driver support.")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221108080322.52268-3-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe

[ Upstream commit e961c0f19450fd4a26bd043dd2979990bf12caf6 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes: 41f93af900a2 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221108080322.52268-2-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: microchip: fix the icicle's #pwm-cells

[ Upstream commit bdd28ab35c163553a2a686fdc5ea3cf247aad69b ]

\#pwm-cells for the Icicle kit's fabric PWM was incorrectly set to 2 &
blindly overridden by the (out of tree) driver anyway. The core can
support inverted operation, so update the entry to correctly report its
capabilities.

Fixes: 72560c6559b8 ("riscv: dts: microchip: add fpga fabric section to icicle kit")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: spear600: Fix clcd interrupt

[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ]

Interrupt 12 of the Interrupt controller belongs to the SMI controller,
the right one for the display controller is the interrupt 13.

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE

[ Upstream commit 3c800bcf07a5957da01593e8f83d797b285a37e0 ]

When the modem node was re-located to a separate LTE source file
"sc7280-herobrine-lte-sku.dtsi", some of the previous LTE users
weren't marked appropriately. Fix this by marking all Qualcomm
reference devices as LTE.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Fixes: d42fae738f3a ("arm64: dts: qcom: Add LTE SKUs for sc7280-villager family")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110070813.1777-1-quic_sibis@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Check firewall before enabling error reporting

[ Upstream commit 2927cf85f4877f417f884919de8e04ab9b362d32 ]

To enable error reporting for a fabric to CCPLEX, we need to write its
register for enabling error interrupt to CCPLEX during boot and later
clear the error status register after error occurs. If a fabric's
registers are protected and not accessible from CCPLEX, then accessing
the registers will cause CBB firewall error.

Add support to check whether write access from CCPLEX to the registers
of a fabric is not blocked by it's firewall before enabling error
reporting to CCPLEX for that fabric.

Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Add checks for potential out of bound errors

[ Upstream commit 55084947d6b48977c5122fbe443743a6c50c12bf ]

Added checks to avoid potential out of bounds errors which can happen if
the 'slave map' and 'CBB errors' arrays are not correct or latest where
some entries are missing.

Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Update slave maps for Tegra234

[ Upstream commit cd1d719b47767f1970d02d18661122b649c35b00 ]

Updating the slave map for fabrics and using the same maps for DCE, RCE
and SCE as they all are a replica in Tegra234.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 55084947d6b4 ("soc/tegra: cbb: Add checks for potential out of bound errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Use correct master_id mask for CBB NOC in Tegra194

[ Upstream commit 33af51a652191d7b9fe449563594b0bdbeb93c2a ]

In Tegra194 SoC, master_id bit range is different between cluster NOC
and CBB NOC. Currently same bit range is used which results in wrong
master_id value. Due to this, illegal accesses from the CCPLEX master
do not result in a crash as expected. Fix this by using the correct
range for the CBB NOC.

Finally, it is only necessary to extract the master_id when the
erd_mask_inband_err flag is set because when this is not set, a crash
is always triggered.

Fixes: b71344221466 ("soc/tegra: cbb: Add CBB 1.0 driver for Tegra194")
Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt7986: fix trng node name

[ Upstream commit 07ce611c705217507c2a036bba8695cbd82c9e36 ]

Binding requires node name to be rng not trng:

trng@1020f000: $nodename:0: 'trng@1020f000' does not match '^rng@[0-9a-f]+$'

Fixes: 50137c150f5f ("arm64: dts: mediatek: add basic mt7986 support")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221027151022.5541-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sifive: ccache: fix missing of_node_put() in sifive_ccache_init()

[ Upstream commit 8fbf94fea0b4e187ca9100936c5429f96b8a4e44 ]

The device_node pointer returned by of_find_matching_node() with
refcount incremented, when finish using it, the refcount need be
decreased.

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sifive: ccache: fix missing free_irq() in error path in sifive_ccache_init()

[ Upstream commit 756344e7cb1afbb87da8705c20384dddd0dea233 ]

Add missing free_irq() before return error from sifive_ccache_init().

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sifive: ccache: fix missing iounmap() in error path in sifive_ccache_init()

[ Upstream commit 73e770f085023da327dc9ffeb6cd96b0bb22d97e ]

Add missing iounmap() before return error from sifive_ccache_init().

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: pwm: fix microchip corePWM's pwm-cells

[ Upstream commit a62d196e89887c029d5aef409135f9a2a8667268 ]

corePWM is capable of inverted operation but the binding requires
\#pwm-cells of 2. Expand the binding to support setting the polarity.

Fixes: df77f7735786 ("dt-bindings: pwm: add microchip corepwm binding")
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a09g011: Fix I2C SoC specific strings

[ Upstream commit 2ac909916b520df09a23f152bb9016d7b892b496 ]

The preferred form for Renesas' compatible strings is:
"<vendor>,<family>-<module>"

Somehow the compatible string for the r9a09g011 I2C IP was upstreamed
as renesas,i2c-r9a09g011 instead of renesas,r9a09g011-i2c, which
is really confusing, especially considering the generic fallback
is renesas,rzv2m-i2c.

The first user of renesas,i2c-r9a09g011 in the kernel is not yet in
a kernel release, it will be in v6.1, therefore it can still be
fixed in v6.1.
Even if we don't fix it before v6.2, I don't think there is any
harm in making such a change.

s/renesas,i2c-r9a09g011/renesas,r9a09g011-i2c/g for consistency.

Fixes: 54ac6794df9d ("arm64: dts: renesas: r9a09g011: Add i2c nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221107165027.54150-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a09g011: Fix unit address format error

[ Upstream commit 278f5015a3deaa2ea0db6070bbc2a8edf2455643 ]

Although the HW User Manual for RZ/V2M states in the "Address Map"
section that the interrupt controller is assigned addresses starting
from 0x82000000, the memory locations from 0x82000000 0x0x8200FFFF
are marked as reserved in the "Interrupt Controller (GIC)" section
and are currently not used by the device tree, leading to the below
warning:

arch/arm64/boot/dts/renesas/r9a09g011.dtsi:51.38-63.5: Warning
(simple_bus_reg): /soc/interrupt-controller@82000000: simple-bus unit
address format error, expected "82010000"

Fix the unit address accordingly.

Fixes: fb1929b98f2e ("arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221103230648.53748-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779f0: Fix SCIF "brg_int" clock

[ Upstream commit 64416ef0b0c4d73349035d1b3206eed3d2047ee0 ]

As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.

Hence change the clock input for the SCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: c62331e8222f ("arm64: dts: renesas: Add Renesas R8A779F0 SoC support")
Fixes: 40753144256b ("arm64: dts: renesas: r8a779f0: Add SCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779f0: Fix HSCIF "brg_int" clock

[ Upstream commit a5101ef18b4d0751588f61d939694bad183cc240 ]

As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.

Hence change the clock input for the HSCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: 01a787f78bfd ("arm64: dts: renesas: r8a779f0: Add HSCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6125: fix SDHCI CQE reg names

[ Upstream commit 3de1172624b3c4ca65730bc34333ab493510b3e1 ]

SM6125 comes with SDCC (SDHCI controller) v5, so the second range of
registers is cqhci, not core.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # Sony Xperia 10 II
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026163646.37433-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm6350: Include header for KEY_POWER

[ Upstream commit f6e2d6914c7c095660a9c7c503328eebab1e2557 ]

Make pm6350.dtsi self-contained by including input.h, needed for the
KEY_POWER constant used to define the power key.

Fixes: d8a3c775d7cd ("arm64: dts: qcom: Add PM6350 PMIC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-5-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index

[ Upstream commit 6d7860f5750d73da2fa1a1f6c9405058a593fa32 ]

As idr_alloc() and of_property_read_string_index() can return negative
numbers, it should be better to check the return value and deal with
the exception.
Therefore, it should be better to use goto statement to stop and return
error.

Fixes: 6adba21eb434 ("soc: qcom: Add APR bus driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107014403.3606-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6350: drop bogus DP PHY clock

[ Upstream commit 95fade4016cbd57ee050ab226c8f0483af1753c4 ]

The QMP pipe clock is used by the USB part of the PHY so drop the
corresponding properties from the DP child node.

Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026152511.9661-3-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: drop bogus DP PHY clock

[ Upstream commit bb9f23e46ddcebe1bc68a43a0f7acfc1865a6472 ]

The QMP pipe clock is used by the USB part of the PHY so drop the
corresponding properties from the DP child node.

Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026152511.9661-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix codec reset line polarity for CRD 1.0/2.0

[ Upstream commit b8f298d4f69d82119ac0d22809a17c80b1f188d1 ]

The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the DTS accordingly.

Fixes: f8b4eb64f200 ("arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-5-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix codec reset line polarity for CRD 3.0/3.1

[ Upstream commit 1caf66104c02d327a2467a69ab18fb24b44e9715 ]

The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the DTS accordingly.

Fixes: 0a3a56a93fd9 ("arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-4-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-mtp: fix reset line polarity

[ Upstream commit 15d9fcbb3e6e8420c7d1ae331405780c5d9c1c25 ]

The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the DTS accordingly.

Fixes: 36c9d012f193 ("arm64: dts: qcom: use GPIO flags for tlmm")
Fixes: 5a263cf629a8 ("arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-3-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: fix sound card reset line polarity

[ Upstream commit 76d21ffc5d425bf7ea9888652c49d7dbda15f356 ]

When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low". It will become important when wcd9335 driver will be converted
to gpiod API that respects declared line polarities.

Fixes: f3eb39a55a1f ("arm64: dts: db820c: Add sound card support")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-1-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8450: fix UFS PHY registers

[ Upstream commit 7af949211a0554bbc06163b081fc2cb516674880 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-5-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: fix UFS PHY registers

[ Upstream commit b3c7839b698cc617e97dd2e4f1eeb4adc280fe58 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-4-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: fix UFS PHY registers

[ Upstream commit 7f8b37dd4e7bf50160529530d9789b846153df71 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: b7e2fba06622 ("arm64: dts: qcom: sm8250: Add UFS controller and PHY")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-3-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: fix UFS PHY registers

[ Upstream commit 36a31b3a8d9ba1707a23de8d8dc1ceaef4eda695 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: make irq truly optional

[ Upstream commit c882c899ead3545102a4d71b5fbe73b9e4bc2657 ]

The function platform_get_irq prints an error message into the kernel
log when the irq isn't found.

Since the interrupt is actually optional and not provided by some SoCs,
use platform_get_irq_optional which does not print an error message.

Fixes: c081f3060fab ("soc: qcom: Add support to register LLCC EDAC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104153041.412020-1-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7180-trogdor-homestar: fully configure secondary I2S pins

[ Upstream commit 59e787935cfe6f562fbb9117e2df4076eaf810d8 ]

The Trogdor Homestar DTSI adds additional GPIO52 pin to secondary I2S pins
("sec_mi2s_active") and configures it to "mi2s_1" function.

The Trogdor DTSI (which is included by Homestar) configures drive
strength and bias for all "sec_mi2s_active" pins, thus the intention was
to apply this configuration also to GPIO52 on Homestar.

Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: be0416a3f917 ("arm64: dts: qcom: Add sc7180-trogdor-homestar")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221020225135.31750-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: correct LPASS pin pull down

[ Upstream commit 195a0a11d66d6c696cbcf398d6bc3f3a3a462f7c ]

The pull-down property is actually bias-pull-down.

Fixes: 3160c1b894d9 ("arm64: dts: qcom: sm8250: add lpass lpi pin controller node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927153429.55365-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name

[ Upstream commit 02549ba5de0a09a27616496c3512db5af4ad7862 ]

The register address in the node name is shadowing vph_pwr@83, whereas
the ADC5_VCOIN register resolves to 0x85.  Fix this copy-paste
discrepancy.

Fixes: 4bf097540506 ("arm64: dts: qcom: pm660: Add VADC and temp alarm nodes")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-3-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: microchip: fix memory node unit address for icicle

[ Upstream commit d6105a8b7c160a73ae04054c8921eba80a294146 ]

Evidently I forgot to update the unit address for the 38-bit cached
memory node when I changed the address in the reg property..
Update it to match.

Fixes: 6c1193301791 ("riscv: dts: microchip: update memory configuration for v2022.10")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: ti_sci: Fix polled mode during system suspend

[ Upstream commit b13b2c3e0e4d0854228b5217fa34e145f3ace8ac ]

Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled
mode during system suspend") uses read_poll_timeout_atomic() macro
in ti_sci_do_xfer() to wait for completion when the system is
suspending. The break condition of the macro is set to "true" which
will cause it break immediately when evaluated, likely before the
TISCI xfer is completed, and always return 0. We want to poll here
until "done_state == true".

1) Change the break condition of read_poll_timeout_atomic() to
the bool variable "done_state".

2) The read_poll_timeout_atomic() returns 0 if the break condition
is met or -ETIMEDOUT if not. Since our break condition has changed
to "done_state", we also don't have to check for "!done_state" when
evaluating the return value.

Fixes: b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend")

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221021185704.181316-1-g-vlaev@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static

[ Upstream commit adf85adc2a7199b41e7a4da083bd17274a3d6969 ]

There is a sparse warning shown below:

drivers/soc/ti/knav_qmss_queue.c:70:12: warning: symbol
'knav_acc_firmwares' was not declared. Should it be static?

Since 'knav_acc_firmwares' is only called within knav_qmss_queue.c,
mark it as static to fix the warning.

Fixes: 96ee19becc3b ("soc: ti: add firmware file name as part of the driver")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221019153212.72350-1-chenjiahao16@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Fix AV96 WLAN regulator gpio property

[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ]

The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
regulator enable GPIO. While the former is also currently handled by
the Linux kernel regulator-fixed driver, the later is the correct one
per DT bindings. Update the DT to use the later.

Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96

[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ]

The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .

Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool, kcsan: Add volatile read/write instrumentation to whitelist

[ Upstream commit 63646fcba5bb4b59a19031c21913f94e46a3d0d4 ]

Adds KCSAN's volatile instrumentation to objtool's uaccess whitelist.

Recent kernel change have shown that this was missing from the uaccess
whitelist (since the first upstreamed version of KCSAN):

  mm/gup.o: warning: objtool: fault_in_readable+0x101: call to __tsan_volatile_write1() with UACCESS enabled

Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: renesas-rpc-if: Clear HS bit during hardware initialization

[ Upstream commit 5192481f908e576be42bd39ec12979b79e11f7e0 ]

According to the datasheet, HS bit should be specified to 1 when using
DMA transfer. As DMA transfer is not supported, it should be cleared to
0.

Previously, the driver relied on the HS bit being cleared by prior
firmware but this is not always the case.

Fix this by ensuring the bit is cleared during hardware initialization.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/08d9fb10b3051decebf871267a6e2e7cb2d4faf9.1665583089.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: fsd: fix drive strength values as per FSD HW UM

[ Upstream commit 21f6546e8bf68a847601e2710378e2224bf49704 ]

Drive strength values used for HSI2C, SPI and UART are not reflecting
the default values recommended by FSD HW UM.

Fixes: 684dac402f21 ("arm64: dts: fsd: Add initial pinctrl support")
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20221013104024.50179-3-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>