Kever Yang [Fri, 21 Jul 2017 10:21:07 +0000 (18:21 +0800)]
rockchip: rk322x: update dram bank size
The DRAM start address is not 0, so need to update the last bank size
as:
DRAM start addr + DRAM_SIZE - last bank start addr
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Philipp Tomsich [Wed, 16 Aug 2017 17:24:02 +0000 (19:24 +0200)]
rockchip: rk3399: spl: remove unused header inclusion
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the
'#include'-statement.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Kever Yang [Wed, 9 Aug 2017 10:51:30 +0000 (18:51 +0800)]
rockchip: dts: rk3399-evb: remove redundant gmac node
There are two same gmac node, remove one.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Philipp Tomsich [Thu, 17 Aug 2017 08:06:59 +0000 (10:06 +0200)]
spl: fix Makefile for NOR, XIP and YMODEM
During the the conversion to $(SPL_TPL_), the SPL_ fragment was
left over for the NOR, XIP and YMODEM boot methods in SPL, making
these unselectable.
This commit fixes this by dropping the spurious 'SPL_' fragment
from each line.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: Bo Shen <voice.shen@gmail.com>
Fixes: f94e643 (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)
Kever Yang [Tue, 1 Aug 2017 01:40:04 +0000 (09:40 +0800)]
rockchip: dts: rk3399-firefly: update gmac parameter
Update the tx_delay and rx_delay to match the timing for
rk3399-firefly board to improve the stability of gmac data
transfer.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tom Rini [Wed, 16 Aug 2017 22:12:58 +0000 (18:12 -0400)]
Merge git://git.denx.de/u-boot-tegra
Tom Rini [Wed, 16 Aug 2017 22:12:35 +0000 (18:12 -0400)]
Merge git://git.denx.de/u-boot-sunxi
Update A20-OLinuXino-Lime2-eMMC_defconfig to include CONFIG_SCSI
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 16 Aug 2017 22:07:20 +0000 (18:07 -0400)]
Merge git://www.denx.de/git/u-boot-imx
Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 16 Aug 2017 22:07:15 +0000 (18:07 -0400)]
Merge git://git.denx.de/u-boot-spi
Bin Meng [Sun, 23 Jul 2017 14:44:37 +0000 (07:44 -0700)]
sf: Preserve QE bit when clearing BP# bits for Macronix flash
On some flash (like Macronix), QE (quad enable) bit is in the same
status register as BP# bits, and we need preserve its original value
during a reboot cycle as this is required by some platforms (like
Intel ICH SPI controller working under descriptor mode).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
[Refined code for readability]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Simon Glass [Thu, 3 Aug 2017 18:22:17 +0000 (12:22 -0600)]
env: Adjust the load() method to return an error
The load() methods have inconsistent behaviour on error. Some of them load
an empty default environment. Some load an environment containing an error
message. Others do nothing.
As a step in the right direction, have the method return an error code.
Then the caller could handle this itself in a consistent way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:16 +0000 (12:22 -0600)]
env: Adjust the get_char() method to return an int
In principle this can fail, e.g. if the index is out of range. Adjust the
driver signature to allow returning an error code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:15 +0000 (12:22 -0600)]
env: Rename some other getenv()-related functions
We are now using an env_ prefix for environment functions. Rename these
other functions as well, for consistency:
getenv_vlan()
getenv_bootm_size()
getenv_bootm_low()
getenv_bootm_mapsize()
env_get_default()
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:14 +0000 (12:22 -0600)]
env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()
Rename this function for consistency with env_get().
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:13 +0000 (12:22 -0600)]
env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()
We are now using an env_ prefix for environment functions. Rename these
for consistency. Also add function comments in common.h.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:12 +0000 (12:22 -0600)]
env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.
Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:11 +0000 (12:22 -0600)]
env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()
Rename this function for consistency with env_set().
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:10 +0000 (12:22 -0600)]
env: Rename common functions related to setenv()
We are now using an env_ prefix for environment functions. Rename these
commonly used functions, for consistency. Also add function comments in
common.h.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:09 +0000 (12:22 -0600)]
env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Peng Fan [Sat, 12 Aug 2017 14:10:57 +0000 (22:10 +0800)]
imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled
Fix build warning when CONFIG_IMX_RDC not defined in defconfig.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Peng Fan [Tue, 8 Aug 2017 08:21:39 +0000 (16:21 +0800)]
imx: mx6sl: simplify code using setbits_le32
Simplify code by removing set_preclk_from_osc with directly setbits_le32.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Peng Fan [Tue, 8 Aug 2017 08:21:38 +0000 (16:21 +0800)]
imx: mx6sx: select OSC as uart's clk parent
As M4 is sourcing UART clk from OSC, to make UART work
when M4 is enabled, need to select OSC as clk parent,
24M OSC is enough for debug UART in uboot.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Peng Fan [Tue, 8 Aug 2017 08:21:35 +0000 (16:21 +0800)]
imx: mx6: soc: fix mx6sll settings
There is not LDO_SOC/PU/ARM/MMDC1 on i.MX6SLL, also no need to gate/ungate
all PFDs to make PFD working.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Peng Fan [Tue, 8 Aug 2017 05:34:53 +0000 (13:34 +0800)]
imx: mx6: select ARM_ERRATA_845369
Select ARM_ERRATA_845369 for i.MX6DQ/DL/QP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Peng Fan [Tue, 8 Aug 2017 05:34:52 +0000 (13:34 +0800)]
arm: Implement workaround for Cortex-A9 errata 845369
Under very rare timing circumstances, transitioning into streaming
mode might create a data corruption. Present on Two or more processors
or 1 core with ACP, all revisions. This erratum can be worked round
by setting bit[22] of the undocumented Diagnostic Control Register to 1.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Peng Fan [Tue, 8 Aug 2017 05:34:51 +0000 (13:34 +0800)]
ARM: i.MX6: exclude the ARM errata from i.MX6 UP system
The ARM errata 751472, 794072, 761320 only applied
to the following configuration:
This erratum affects configurations with either:
- One processor if the ACP is present
- Two or more processors
i.MX6 family does not have the ACP and thus only the MPCore system
will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Sébastien Szymanski [Wed, 2 Aug 2017 15:05:27 +0000 (17:05 +0200)]
imx: imx6ull: correct get_cpu_speed_grade_hz
i.MX6ULL has different speed grades than i.MX6UL.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Sébastien Szymanski [Wed, 2 Aug 2017 15:05:26 +0000 (17:05 +0200)]
imx: imx6ul: correct get_cpu_speed_grade_hz on 696MHz SoCs
Return the correct value when the speed grade is 696MHz.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Breno Lima [Wed, 2 Aug 2017 17:08:41 +0000 (14:08 -0300)]
mx6sabreauto: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values
The IPU AXI QoS for the i.MX6QP and i.MX6DP processors have to be set as
commented in the code:
/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
Set IOMUXC_GPR6 and IOMUXC_GPR7 to 0x77177717 instead of 0x007F007F.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Breno Lima [Wed, 2 Aug 2017 17:03:49 +0000 (14:03 -0300)]
mx6sabresd: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values
The IPU AXI QoS for the i.MX6QP and i.MX6DP processors have to be set as
commented in the code:
/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
Set IOMUXC_GPR6 and IOMUXC_GPR7 to 0x77177717 instead of 0x007F007F.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Anatolij Gustschin [Wed, 2 Aug 2017 14:05:12 +0000 (16:05 +0200)]
imx6: clock: correct comment for PLL_VIDEO
This appear to be a copy-paste error, clean it up.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Anatolij Gustschin [Wed, 2 Aug 2017 13:56:11 +0000 (15:56 +0200)]
imx6: use SION macro in SDn_CMD mux mode bitfield arguments
Select SION by appropriate macro instead of constant.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Simon Glass [Thu, 3 Aug 2017 18:22:08 +0000 (12:22 -0600)]
env: Drop saveenv() in favour of env_save()
Use the env_save() function directly now that there is only one
implementation of saveenv().
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:07 +0000 (12:22 -0600)]
env: Drop env_relocate_spec() in favour of env_load()
This is a strange name for a function that loads the environment. There is
now only one implementation of this function, so use the new env_load()
function directly instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:06 +0000 (12:22 -0600)]
env: Drop env_get_char_spec()
We only have a single implementation of this function now and it is called
env_get_char(). Drop the old function and the weak version.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:22:05 +0000 (12:22 -0600)]
env: Drop env_init_new()
Now that env_init() is only defined once we can drop the env_init_new()
name and just use env_init().
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:04 +0000 (12:22 -0600)]
env: Drop unused env_ptr variables
This variable is declared as a global in most environment location
drivers. But it is not used outside the drivers and most of the
declarations are unnecessary.
Also some drivers call free() on env_ptr which seems wrong since it is
not in the heap.
Drop the variable where possible, and all calls to free().
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:03 +0000 (12:22 -0600)]
env: Drop the env_name_spec global
Add a name to the driver and use that instead of the global variable
declared by each driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:02 +0000 (12:22 -0600)]
env: Drop common init() functions
Most of the init() implementations just use the default environment.
Adjust env_init_new() to do this automatically, and drop the redundant
code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:01 +0000 (12:22 -0600)]
env: Switch over to use environment location drivers
Move over to use a the master implementation of the location drivers, with
each method calling out to the appropriate driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:22:00 +0000 (12:22 -0600)]
env: Add a new implementation of environment access
We plan to move to a environment access via drivers for each location
where the environment can be stored. Add an implementation for this. So
far it is not used, but will be pressed into service in a future patch.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:21:59 +0000 (12:21 -0600)]
env: Convert CONFIG_ENV_IS_IN... to a choice
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).
Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.
Also expand the help for the 'nowhere' option and move it to the top since
it is the default.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>
Marcel Ziswiler [Thu, 20 Jul 2017 12:57:44 +0000 (14:57 +0200)]
apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Thu, 20 Jul 2017 12:57:43 +0000 (14:57 +0200)]
apalis-tk1: remove duplicate hdmi_ddc device tree node
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Thu, 13 Jul 2017 13:15:29 +0000 (15:15 +0200)]
dm: tegra: move apalis t30/tk1, colibri t20/t30 to livetree
Change these board to use a live device tree after relocation.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Thu, 13 Jul 2017 13:15:28 +0000 (15:15 +0200)]
apalis_t30: fix usb otg power enable
Fix USB OTG power enable aka USBO1_EN which on Apalis T30 is connected
to the T30 ball GEN2_I2C_SCL.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Thu, 3 Aug 2017 18:21:58 +0000 (12:21 -0600)]
env: Create a location driver for each location
Set up a location driver for each supported environment location. At
present this just points to the global functions and is not used. A
later patch will switch this over to use private functions in each driver.
There are several special cases here in various drivers to handle
peculiarities of certain boards:
1. Some boards define CONFIG_ENV_IS_IN_FAT and CONFIG_SPL_ENV_SUPPORT but
do not actually load the environment in SPL. The env load code was
optimised out before but with the driver, it is not. Therefore a special
case is added to env/fat.c. The correct fix (depending on board testing
might be to disable CONFIG_SPL_ENV_SUPPORT.
2. A similar situations happens with CONFIG_ENV_IS_IN_FLASH. Some boards
do not actually load the environment in SPL, so to reduce code size we
need to drop that code. A similar fix may be possible with these boards,
or it may be possible to adjust the environment CONFIG settings.
Added to the above is that the CONFIG_SPL_ENV_SUPPORT option does not
apply when the environment is in flash.
Obviously the above has been discovered through painful and time-consuming
trial and error. Hopefully board maintainers can take a look and figure
out what is actually needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:21:57 +0000 (12:21 -0600)]
env: Rename nand env_location to nand_env_location
We want to use this name for all environment drivers. Update the nand
driver to use a more specific name.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:56 +0000 (12:21 -0600)]
env: Add an enum for environment state
At present we have three states for the environment, numbered 0, 1 and 2.
Add an enum to record this to avoid open-coded values.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:55 +0000 (12:21 -0600)]
env: common: Drop env_get_char_memory()
This function is the same as env_get_char_spec() apart from dropping the
brackets. Drop the brackets from env_get_char_spec() and use that instead
of env_get_char_memory().
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:54 +0000 (12:21 -0600)]
env: common: Drop env_get_char_init()
This function does nothing but call env_get_char_spec(). Drop it and
adjust its only caller.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:53 +0000 (12:21 -0600)]
env: common: Factor out the common env_valid check
The check for gd->env_valid is used in both the 'if' and 'else' part of
env_get_char(). Move it into that function instead for simplicity. Drop
that code from the two leaf functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:52 +0000 (12:21 -0600)]
env: common: Drop env_get_addr()
This function is not used anywhere other than env_get_char(). Move the
code into that function.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:21:51 +0000 (12:21 -0600)]
env: common: Make env_get_addr/get_char_memory() static
These functions are not used outside this file. Make them static and order
them to avoid forward declarations.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:50 +0000 (12:21 -0600)]
env: Use tabs in ENV_IS_IN_FAT
Tidy up the formatting of this option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 3 Aug 2017 18:21:49 +0000 (12:21 -0600)]
Move environment files from common/ to env/
About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 3 Aug 2017 18:21:48 +0000 (12:21 -0600)]
Makefile: Rename 'env' target to 'environ'
This target stops us using 'env' as a subdirectory. It is not mentioned in
the help so seems to be an internal target. Rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jagan Teki [Sat, 12 Aug 2017 12:48:58 +0000 (18:18 +0530)]
sun50i: a64: Add A64-OLinuXino initial support
OLimex A64-OLinuXino is an open-source hardware board
using the Allwinner A64 SOC.
OLimex A64-OLinuXino has
- A64 Quad-core Cortex-A53 64bit
- 1GB or 2GB RAM DDR3L @ 672Mhz
- microSD slot and 4/8/16GB eMMC
- Debug TTL UART
- HDMI
- LCD
- IR receiver
- 5V DC power supply
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Fri, 9 Jun 2017 13:01:17 +0000 (18:31 +0530)]
sun50i: a64: Add initial NanoPi A64 support
NanoPi A64 is a new board of high performance with low cost
designed by FriendlyElec., using the Allwinner A64 SOC.
Nanopi A64 features
- Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS
- 1GB DDR3 RAM
- MicroSD
- Gigabit Ethernet (RTL8211E)
- Wi-Fi 802.11b/g/n
- IR receiver
- Audio In/Out
- Video In/Out
- Serial Debug Port
- microUSB 5V 2A DC power-supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tom Rini [Tue, 15 Aug 2017 00:02:11 +0000 (20:02 -0400)]
Prepare v2017.09-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 14 Aug 2017 23:58:53 +0000 (19:58 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 14 Aug 2017 21:06:58 +0000 (17:06 -0400)]
Merge git://git.denx.de/u-boot-net
Sam Protsenko [Mon, 14 Aug 2017 17:22:17 +0000 (20:22 +0300)]
common: Move CONFIG_BOOTARGS to Kconfig
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini <trini@konsulko.com>
Prabhakar Kushwaha [Wed, 15 Feb 2017 15:26:03 +0000 (20:56 +0530)]
driver: net: ldpaa: Update priv->phydev after free()
Even after memory free of phydev, priv is still pointing to the
obsolete address.
So update priv->phydev as NULL after memory free.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Yuiko Oshino [Fri, 11 Aug 2017 16:44:58 +0000 (12:44 -0400)]
usb: net: Add support for Microchip LAN75xx and LAN78xx
Add support for Microchip LAN7500, LAN7800 and LAN7850,
USB to 10/100/1000 Ethernet Controllers.
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Yuiko Oshino [Fri, 11 Aug 2017 16:44:57 +0000 (12:44 -0400)]
net: Add mii_resolve_flowctrl_fdx()
Add an mii helper function to resolve flow control status per
IEEE 802.3-2005 table 28B-3.
This function was taken from the Linux source tree.
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Madalin Bucur [Fri, 4 Aug 2017 06:14:53 +0000 (09:14 +0300)]
net: fman: add support RGMII_TXID to memac
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Tom Rini [Mon, 14 Aug 2017 17:21:44 +0000 (13:21 -0400)]
ARM: rockchip: rock: Correct test to use CONFIG_IS_ENABLED not defined
While it is likely that this entire case is superfluous and can be
removed, correct the test now to match what is in rockchip-common.h and
makes sense based on context of the code. Otherwise we get a large
number of warnings.
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 14 Aug 2017 14:40:01 +0000 (10:40 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-rockchip
Patrice Chotard [Wed, 9 Aug 2017 13:13:02 +0000 (15:13 +0200)]
stm32f1: remove stm32f1 support
A few years ago STM32F1 SoCs support has been added :
0144caf22ce6acd5c gpio: stm32: add stm32f1 support
2d18ef2364fd3561a ARMv7M: add STM32F1 support
But neither STM32F1 dedicated defconfig nor board was
associated to these commits.
Got confirmation from Tom Rini and Matt Porter to remove
all this code [1]
[1] http://u-boot.10912.n7.nabble.com/Remove-STM32F1-support-td301603.html
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Chris Packham [Mon, 7 Aug 2017 04:04:14 +0000 (16:04 +1200)]
cmd/bdinfo: correct comment in board_detail
This appears to be a simple typo that dates back to the original
implementation of board_detail in commit
e79394643b26 ("common: Update
cmd_bdinfo for PPC").
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Simon Glass [Sat, 5 Aug 2017 16:28:41 +0000 (10:28 -0600)]
test: Move the FIT test into the correct place
Move this test so that it will run when 'make tests' is used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 5 Aug 2017 16:28:40 +0000 (10:28 -0600)]
test: Convert the FIT test to test/py
Convert this test to use the pytest framework.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 5 Aug 2017 16:28:39 +0000 (10:28 -0600)]
test: Indent test-fit.py to match the next patch
We plan to rewrite this script to use the pytest framework. To make it
easier to review the changes, indent the code to match the next patch.
This gets all of the whitespace changes out of the way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Nishanth Menon [Sat, 5 Aug 2017 02:42:09 +0000 (21:42 -0500)]
ARM: OMAP5: Enable support for AVS0 for OMAP5 production devices
OMAP5432 did go into production with AVS class0 registers which were
mutually exclusive from AVS Class 1.5 registers.
Most OMAP5-uEVM boards use the pre-production Class1.5 which has
production efuse registers set to 0. However on production devices,
these are set to valid data.
scale_vcore logic is already smart enough to detect this and use the
"Nominal voltage" on devices that do not have efuse registers populated.
On a test production device populated as follows:
MPU OPP_NOM:
=> md.l 0x04A0021C4 1
4a0021c4:
03a003e9 ....
(0x3e9 = 1.01v) vs nom voltage of 1.06v
MPU OPP_HIGH:
=> md.l 0x04A0021C8 1
4a0021c8:
03400485 ..@.
MM OPP_NOM:
=> md.l 0x04A0021A4 1
4a0021a4:
038003d4 ....
(0x3d4 = 980mV) vs nom voltage of 1.025v
MM OPP_OD:
=> md.l 0x04A0021A8 1
4a0021a8:
03600403 ..`.
CORE OPP_NOM:
=> md.l 0x04A0021D8 1
4a0021d8:
000003cf ....
(0x3cf = 975mV) vs nom voltage of 1.040v
Since the efuse values are'nt currently used, we do not regress on
existing pre-production samples (they continue to use nominal voltage).
But on boards that do have production samples populated, we can leverage
the optimal voltages necessary for proper operation.
Tested on:
a) 720-2644-001 OMAP5UEVM with production sample.
b) 750-2628-222(A) UEVM5432G-02 with pre-production sample.
Data based on OMAP5432 Technical reference Manual SWPU282AF (May
2012-Revised Aug 2016)
NOTE: All collaterals on OMAP5432 silicon itself seems to have been
removed from ti.com, though EVM details are still available:
http://www.ti.com/tool/OMAP5432-EVM
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Nishanth Menon [Sat, 5 Aug 2017 02:42:08 +0000 (21:42 -0500)]
ARM: OMAP5: Remove OPP_LOW Definitions for ES2.0
ES2.0 descopes OPP_LOW definition. So remove it from macros defined.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Simon Glass [Fri, 4 Aug 2017 22:20:16 +0000 (16:20 -0600)]
test: Fix FIT test to pass again
A recent change adjusted a test string so that the test no-longer passes.
Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Heiko Schocher <hs@denx.de>
Fixes:
b28c5fcc (test-fit.py: Minor grammar/spelling/clarification tweaks)
Andy Shevchenko [Fri, 4 Aug 2017 21:48:28 +0000 (15:48 -0600)]
wdt: Update uclass to make clear that the timeout is in ms
Convert name to show explicitly that we are using milliseconds. For a
watchdog timer this is precise enough.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Nobuhiro Iwamatsu [Fri, 4 Aug 2017 20:47:02 +0000 (05:47 +0900)]
boot_fit: Change return value from FDT_ERROR to -EINVAL in fdt_offset()
FDT_ERROR is defined as unsigned long. However, since the return value of
fdt_offset() is int, a warning will occur when compiling. Also, it is better
to use -EINVAL than FDT_ERROR.
This fixes this problem by change return value from FDT_ERROR to -EINVAL.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Franklin S Cooper Jr <fcooper@ti.com>
Bin Meng [Thu, 3 Aug 2017 09:31:03 +0000 (02:31 -0700)]
x86: qemu: Enable NVMe driver
QEMU supports NVMe emulation. Enable the NVMe driver on QEMU x86.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Bin Meng [Thu, 3 Aug 2017 09:31:02 +0000 (02:31 -0700)]
nvme: Handle zero Maximum Data Transfer Size (MDTS)
Maximum Data Transfer Size (MDTS) field indicates the maximum
data transfer size between the host and the controller. The
host should not submit a command that exceeds this transfer
size. The value is in units of the minimum memory page size
and is reported as a power of two (2^n).
The spec also says: a value of 0h indicates no restrictions
on transfer size. On the real NVMe card this is normally not
0 due to hardware restrictions, but with QEMU emulated NVMe
device it reports as 0. In nvme_blk_read/write() below we
have the following algorithm for maximum number of logic
blocks per transfer:
u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift);
dev->max_transfer_shift being 0 will for sure cause lbas to
overflow. Let's use 20. With this fix, the NVMe driver works
on QEMU emulated NVMe device.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jon Nettleton [Thu, 3 Aug 2017 09:31:01 +0000 (02:31 -0700)]
nvme: Fix number of blocks detection
NVMe should use the nsze value from the queried device. This will
reflect the total number of blocks of the device and fix detecting
my Samsung 960 EVO 256GB.
Original:
Capacity: 40386.6 MB = 39.4 GB (
82711872 x 512)
Fixed:
Capacity: 238475.1 MB = 232.8 GB (
488397168 x 512)
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jon Nettleton [Thu, 3 Aug 2017 09:31:00 +0000 (02:31 -0700)]
nvme: Detect devices that are class Storage Express
This adds support to detect the catchall PCI class for NVMe devices.
It allows the drivers to work with most NVMe devices that don't need
specific detection due to quirks etc.
Tested against a Samsung 960 EVO drive.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Zhikang Zhang [Thu, 3 Aug 2017 09:30:59 +0000 (02:30 -0700)]
nvme: Add nvme commands
Add nvme commands in U-Boot command line.
1. "nvme scan" - scan NVMe blk devices
2. "nvme list" - show all available NVMe blk devices
3. "nvme info" - show current or a specific NVMe blk device
4. "nvme device" - show or set current device
5. "nvme part" - print partition table
6. "nvme read" - read data from NVMe blk device
7. "nvme write" - write data to NVMe blk device
Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Zhikang Zhang [Thu, 3 Aug 2017 09:30:58 +0000 (02:30 -0700)]
nvme: Add show routine to print detailed information
This adds nvme_print_info() to show detailed NVMe controller and
namespace information.
Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Zhikang Zhang [Thu, 3 Aug 2017 09:30:57 +0000 (02:30 -0700)]
nvme: Add NVM Express driver support
NVM Express (NVMe) is a register level interface that allows host
software to communicate with a non-volatile memory subsystem. This
interface is optimized for enterprise and client solid state drives,
typically attached to the PCI express interface.
This adds a U-Boot driver support of devices that follow the NVMe
standard [1] and supports basic read/write operations.
Tested with a 400GB Intel SSD 750 series NVMe card with controller
id 8086:0953.
[1] http://www.nvmexpress.org/resources/specifications/
Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Zhikang Zhang [Thu, 3 Aug 2017 09:30:56 +0000 (02:30 -0700)]
dm: blk: part: Add UCLASS_NVME and IF_TYPE_NVME
This adds a new uclass id and block interface type for NVMe.
Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 19:54:56 +0000 (21:54 +0200)]
arm: mvebu: ddr3_debug: remove self assignments
Remove superfluous self assignements.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 19:51:05 +0000 (21:51 +0200)]
arm: mvebu: remove self assignment
Assigning dev_num to itself is superfluous.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 19:40:37 +0000 (21:40 +0200)]
tpm: add missing va_end
va_start must always be matched by va_end.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 19:30:55 +0000 (21:30 +0200)]
ARM: hisilicon: hikey: do not rely on random stack value
If CONFIG_MMC_DW is not defined the return value of
init_dwmmc should not rely on a random stack value.
Instead indicate that no error occured.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:46:05 +0000 (20:46 +0200)]
stm32: remove redundant 'else if'
The if in the else branch is superfluous.
We can use a simple if.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:40:43 +0000 (20:40 +0200)]
arm: mvebu: avoid possible NULL dereference
It does not make sense to check if info is NULL after
dereferencing it.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:34:20 +0000 (20:34 +0200)]
armv7m: mpu_config add missing break
For DEVICE_NON_SHARED the newly assigned value of attr
is overwritten due to a missing break.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:27:16 +0000 (20:27 +0200)]
bcm281xx: clock: avoid possible NULL dereference
It does not make sense first to dereference c and then
to check if it is NULL.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:22:47 +0000 (20:22 +0200)]
arm: bcm235xx: clk_set_rate avoid possible NULL deref
It does not make sense first to dereference c and then
to check if it is NULL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:15:51 +0000 (20:15 +0200)]
arm: bcm235xx: avoid possible NULL dereference
It does not make sense to first dereference c and then
check if it is NULL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 18:09:38 +0000 (20:09 +0200)]
arm: spear: do not return random value from stack
If the NOR device is not available do not return
a random value from the stack.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
xypron.glpk@gmx.de [Sun, 30 Jul 2017 17:54:37 +0000 (19:54 +0200)]
api: remove superfluous assignment
No need to assign a value to sig if the next statement using sig
is itself an assignment of a value to sig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adam Ford [Thu, 27 Jul 2017 03:25:30 +0000 (22:25 -0500)]
Convert CONFIG_OMAP3_SPI to Kconfig
This converts the following to Kconfig:
CONFIG_OMAP3_SPI
Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Minor comment tweaks]
Signed-off-by: Tom Rini <trini@konsulko.com>