Michael Olbrich [Wed, 11 Dec 2013 08:36:22 +0000 (09:36 +0100)]
avimux: don't make the buffer writable unless absolutely necessary
https://bugzilla.gnome.org/show_bug.cgi?id=722396
Michael Olbrich [Thu, 12 Sep 2013 14:56:56 +0000 (16:56 +0200)]
v4l2: set GST_BUFFER_FLAG_DELTA_UNIT when appropriate
https://bugzilla.gnome.org/show_bug.cgi?id=722394
Michael Olbrich [Fri, 17 Jan 2014 06:46:09 +0000 (07:46 +0100)]
v4l2bufferpool: don't ref the newly created allocator
Otherwise the allocator will never be deleted.
https://bugzilla.gnome.org/show_bug.cgi?id=712612
Sebastian Dröge [Wed, 15 Jan 2014 21:47:12 +0000 (22:47 +0100)]
matroskademux: Don't skip all video frames until the first keyframe
Instead do it like all other demuxers and let parsers and decoders
handle that. The keyframe information inside the container might
be completely wrong like in the sample file of the bug report,
and if it is correct and we push no keyframes, then the parsers
and decoders will handle that properly anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=682276
Thiago Santos [Mon, 13 Jan 2014 13:08:09 +0000 (10:08 -0300)]
qtdemux: remove elst_offset variables
They are not used anymore
Thiago Santos [Tue, 7 Jan 2014 00:36:17 +0000 (21:36 -0300)]
qtdemux: remember reverse playback when verifying the segment end
Check if the rate is positive or negative to correctly compare the current
position with the segment to make reverse playback work
Thiago Santos [Fri, 3 Jan 2014 13:59:35 +0000 (10:59 -0300)]
qtdemux: do not ignore empty segments
Make sure empty segments are used and pushed with a gap event
to represent its data (or lack of it)
Each QtSegment is mapped into a GstSegment with the corresponding
media range. For empty QtSegments a gap event is pushed instead
of GstBuffers and it advances to the next QtSegment.
To make this work with seeks, need to keep track of the starting
'base' to make sure it remains consistently increasing when
pushing new segment events.
For example: if a seek makes qtdemux start from 5s, the first
segment will have a base=0. When the next segment is activated,
its base time will be QtSegment.time - qtdemux.segment_base so
that it doesn't include the first 5s that weren't played and
shouldn't be accounted on the running time
This purposedly will remove the fix made for
https://bugzilla.gnome.org/show_bug.cgi?id=700264, at this
point it was decided to respect the gaps, even if they cause
a delay on playback, because that's the way the file was crafted.
https://bugzilla.gnome.org/show_bug.cgi?id=345830
Olivier Crête [Fri, 13 Dec 2013 04:05:43 +0000 (23:05 -0500)]
tests: Remove usage of the system clock from the rtprtx test
Olivier Crête [Fri, 13 Dec 2013 04:22:41 +0000 (23:22 -0500)]
tests: Initial segment in rtpcollision test
George Kiagiadakis [Tue, 14 Jan 2014 14:56:42 +0000 (15:56 +0100)]
examples/*-rtpaux: specify payload type association for the audio stream, so that rtx works also for audio
George Kiagiadakis [Tue, 14 Jan 2014 12:08:18 +0000 (13:08 +0100)]
rtprtxsend: remove wrong check for payload type not having been set
1) pt can be lower than 96
2) there is no point in checking that because rtprtxsend will not
even store buffers for payload types that it doesn't know about,
so this case will never be reached
George Kiagiadakis [Tue, 14 Jan 2014 12:01:41 +0000 (13:01 +0100)]
rtprtxsend: fix data locking when creating rtx packets
This patch moves the creation of rtx packets to be done early,
in the src_event() function, when they are requested. The purpose
is to run gst_rtp_rtx_buffer_new() with the object locked to
protect internal data, because if it is done at the pushing stage,
we would have to lock and unlock multiple times in a row while we
are pushing the rtx buffers.
Previously there was no locking at all, which was terribly wrong.
George Kiagiadakis [Tue, 14 Jan 2014 11:50:23 +0000 (12:50 +0100)]
rtprtxsend: lock access to internal data in sink_event() function
George Kiagiadakis [Tue, 14 Jan 2014 11:44:06 +0000 (12:44 +0100)]
rtprtxsend: remove unnecessary call to reset() from finalize()
...and use _free_full() on the pending buffers queue now that
reset() is not being called
George Kiagiadakis [Tue, 14 Jan 2014 11:38:51 +0000 (12:38 +0100)]
rtprtxsend: remove unused parameter from the internal reset() method
George Kiagiadakis [Tue, 14 Jan 2014 11:32:38 +0000 (12:32 +0100)]
rtprtxsend: Use g_slice_* for allocating internal structures
George Kiagiadakis [Tue, 14 Jan 2014 11:28:01 +0000 (12:28 +0100)]
rtprtxreceive: remove stupid mutex unlock in the middle of chain()
George Kiagiadakis [Tue, 14 Jan 2014 11:25:36 +0000 (12:25 +0100)]
rtprtxreceive: use GST_DEBUG_OBJECT / GST_WARNING_OBJECT instead of GST_DEBUG / g_warning
George Kiagiadakis [Tue, 14 Jan 2014 11:19:58 +0000 (12:19 +0100)]
rtprtxreceive: fix integer format specifiers in GST_DEBUG
seqnum in this function is 32-bit, so G_GUINT16_FORMAT would
produce undefined output on big endian systems
George Kiagiadakis [Tue, 14 Jan 2014 11:13:49 +0000 (12:13 +0100)]
rtprtxsend: change the rtx_pt_map directly in set_property() instead of delaying it for chain()
The same lock is held, so there is no point in complicating it...
George Kiagiadakis [Tue, 14 Jan 2014 11:07:58 +0000 (12:07 +0100)]
rtprtxreceive: change the rtx_pt_map directly in set_property() instead of delaying it for chain()
The same lock is held, so there is no point in complicating it...
George Kiagiadakis [Tue, 14 Jan 2014 10:55:00 +0000 (11:55 +0100)]
rtprtxreceive: simplify the code of finalize()
George Kiagiadakis [Tue, 14 Jan 2014 10:52:21 +0000 (11:52 +0100)]
rtprtxreceive: use the GstObject lock instead of a new one
George Kiagiadakis [Tue, 14 Jan 2014 10:45:52 +0000 (11:45 +0100)]
rtprtxsend: use the GstObject lock instead of a new one
Nicolas Dufresne [Tue, 10 Dec 2013 19:29:55 +0000 (14:29 -0500)]
v4l2: Add NV12_64Z32 support
https://bugzilla.gnome.org/show_bug.cgi?id=722127
Justin Joy [Tue, 14 Jan 2014 10:08:49 +0000 (19:08 +0900)]
osshelper: Don't leak fd when getting card name
https://bugzilla.gnome.org/show_bug.cgi?id=722163
Vincent Penquerc'h [Tue, 14 Jan 2014 09:43:33 +0000 (09:43 +0000)]
Revert "aacparse: relax the detection of ADTS"
This was pushed by mistake along with the V4L2 fix.
This reverts commit
8eb4b032bef444397c4d211f2095c173ba114187.
Justin Joy [Tue, 14 Jan 2014 06:42:01 +0000 (15:42 +0900)]
rtpg726pay: don't leak encoding_name string
https://bugzilla.gnome.org/show_bug.cgi?id=722159
Vincent Penquerc'h [Mon, 13 Jan 2014 09:14:00 +0000 (09:14 +0000)]
v4l2: fix build break using V4L2_CAP_VIDEO_M2M_MPLANE
This may not be defined. Since the previous version used
only the other define (V4L2_CAP_VIDEO_OUTPUT_MPLANE), fall
back on this only when not available.
Akihiro Tsukada [Tue, 26 Feb 2013 16:45:52 +0000 (01:45 +0900)]
aacparse: relax the detection of ADTS
According to ISO/IEC 13818-7, "channel_config" field in ADTS header
may have value of 0, as in the case of frame with PCE.
gst_aac_parse_detect_streams() returned FALSE for those frames
and discarded them.
Julien Isorce [Tue, 7 Jan 2014 11:58:23 +0000 (11:58 +0000)]
v4l2bufferpool: check set_config return value in gst_v4l2_buffer_pool_new
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Fri, 10 Jan 2014 17:40:31 +0000 (12:40 -0500)]
v4l2object: Add parsed=1 field for encoded output
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Fri, 10 Jan 2014 17:39:16 +0000 (12:39 -0500)]
v4l2object: Don't leak empty caps
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Julien Isorce [Wed, 8 Jan 2014 16:51:21 +0000 (16:51 +0000)]
v4l2bufferpool: do not stop a stream not previously started
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 12 Dec 2013 21:27:21 +0000 (16:27 -0500)]
v4l2object: Don't enforce dimension field on encoded formats
Don't enforce having width, height and framerate in template caps for encoded
formats. These don't always need to be exposed and may break negotiation for
decoder and decoding sink. If needed, these field will be automatically added
when probed caps are known.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Julien Isorce [Thu, 12 Dec 2013 17:09:59 +0000 (17:09 +0000)]
v4l2object: unref downstream pool
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Julien Isorce [Wed, 18 Dec 2013 18:37:23 +0000 (13:37 -0500)]
v4l2bufferpool: add gst_v4l2_buffer_pool_flush
STREAMOFF set all v4l2buffers to DEQUEUE state.
Then for CAPTURE we call QBUF on each buffer.
For OUTPUT the buffers are just push back in the GstBufferPool
base class 's queue.
But the loop actually looks like the same.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Benjamin Gaignard [Mon, 16 Dec 2013 22:29:30 +0000 (17:29 -0500)]
v4l2object: Add vp8 support
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 12 Dec 2013 21:46:09 +0000 (16:46 -0500)]
v4l2object: Don't force framerate field for OUTPUT
If there is nothing that seems to force a certain framerate on output device, it is
preferable to simply not set that feild. This allow negotiation with tsdemux in a
decoder for example.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 12 Dec 2013 19:07:03 +0000 (14:07 -0500)]
v4l2object: _v4l2fourcc_to_structure() can be static
This function is not used anymore outside v4l2object.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 12 Dec 2013 19:22:26 +0000 (14:22 -0500)]
v4l2object: Add MPEG1/2 support
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 12 Dec 2013 17:18:45 +0000 (12:18 -0500)]
v4l2object: Ask for a decent buffer size when dealing with encoded formats
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Sat, 7 Dec 2013 19:03:53 +0000 (14:03 -0500)]
v4l2bufferpool: On warn on size change if n_planes > 1
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Julien Isorce [Tue, 31 Dec 2013 16:38:09 +0000 (16:38 +0000)]
v4l2object: check if translated format is valid
Also add a FIXME in gst_v4l2_object_setup_format
to note that the whole function has to be improved
in order to support ENCODED formats.
It requires to have an encoder device which we do not
have right now.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Sat, 7 Dec 2013 15:31:15 +0000 (10:31 -0500)]
v4l2object: Validate returned dimensions
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Fri, 6 Dec 2013 00:36:25 +0000 (19:36 -0500)]
v4l2object: Ensure max is not smaller then min in decide_allocation
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Fri, 6 Dec 2013 00:36:06 +0000 (19:36 -0500)]
v4l2object: Don't keep the max paramter when using our own pool
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Fri, 6 Dec 2013 00:34:44 +0000 (19:34 -0500)]
v4l2bufferpool: Respect the suggested min buffer
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 5 Dec 2013 23:48:44 +0000 (18:48 -0500)]
v4l2object: Allocate pool if needed in decide_allocation
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 5 Dec 2013 23:49:19 +0000 (18:49 -0500)]
v4l2object: Add V4L2_CID_MIN_BUFFERS_FOR_CAPTURE support
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 5 Dec 2013 23:48:15 +0000 (18:48 -0500)]
v4l2: Move decide allocation into v4l2object
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 5 Dec 2013 18:51:13 +0000 (13:51 -0500)]
v4l2object: Implement _setup_format()
This method allow setting up the object from the currently configured format on the
device. This is useful for M2M element where input data decides the format that will
be set on capture side.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Tue, 10 Dec 2013 19:34:17 +0000 (14:34 -0500)]
v4l2object: Split out saving format from set_format()
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Julien Isorce [Tue, 31 Dec 2013 15:37:26 +0000 (15:37 +0000)]
v4l2object: set only one plane for encoded format
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 4 Dec 2013 21:49:13 +0000 (16:49 -0500)]
v4l2object: Move code block where it belongs
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 4 Dec 2013 21:26:12 +0000 (16:26 -0500)]
v4l2object: Don't check format specific information
The number of plane, and the stride does not represent a capability change. Same caps
can have different stride from the default GstVideoInfo and the number of planes will
never change for 1 format.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 4 Dec 2013 21:23:18 +0000 (16:23 -0500)]
v4l2object: Move the extrapolation of stride at the right place
Now that we have a stride array, we should extrapolate only when
eeded (non multi-planar buffer).
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 4 Dec 2013 20:09:44 +0000 (15:09 -0500)]
v4l2object: Move back assertions where they should be
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 4 Dec 2013 20:09:10 +0000 (15:09 -0500)]
v4l2object: Move mplane logic into gst_v4l2_object_get_caps_info()
It makes the gst_v4l2_object_set_format() slightly simplier and will make that
logic reusable. Note that gst_v4l2_object_has_mplane() will always return the
same value for one device. There is no need to check against the caps as this
has already been done by _open.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Tue, 3 Dec 2013 23:27:47 +0000 (18:27 -0500)]
v4l2object: Split _v4l2fourcc_to_video_format
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Mon, 2 Dec 2013 23:05:11 +0000 (18:05 -0500)]
v4l2bufferpool: Request buffers only once
VIDIOC_REQBUFS allocates buffer, it has no place inside set_config. Also, some driver do
no allow multiple calls to this ioctl.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Mon, 2 Dec 2013 20:26:50 +0000 (15:26 -0500)]
v4l2object: Don't validate dimension for encoded format
We set the dimensions just in case but don't validate them
afterwards. For some codecs the dimensions are *not* in the
bitstream, IIRC VC1 in ASF mode for example.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 28 Nov 2013 22:10:29 +0000 (17:10 -0500)]
v4l2object: Quirks for dev without initial format
Most M2M have undefined behaviour initially when VIDIOC_G_FMT is called.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 28 Nov 2013 22:09:26 +0000 (17:09 -0500)]
v4l2object: Add gst_v4l2_object_open_shared()
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 28 Nov 2013 22:07:05 +0000 (17:07 -0500)]
v4l2object: Implement gst_v4l2_dup()
This will duplicated the FD from another object and copy over the probed result.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Thu, 28 Nov 2013 21:59:59 +0000 (16:59 -0500)]
v4l2object: make IO_MODE enum public
This is to allow adding a second io-mode property on M2M device like decoder so
input and output can be controlled separatly.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 5 Jun 2013 03:42:24 +0000 (23:42 -0400)]
v4l2: better handle quirks activation
This way we can activate deactivate those quirks all at once at one
place.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Wed, 5 Jun 2013 03:34:04 +0000 (23:34 -0400)]
v4l2: Fix h264 caps
V4L2_PIX_FMT_H264 is documentated as byte-stream (with start code). The ensure proper
negotiation with element like h264parse.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Nicolas Dufresne [Fri, 6 Dec 2013 19:44:51 +0000 (14:44 -0500)]
v4l2object: Split caps in different categories
This is need to correctly expose capabilities on specialized devices
like decoders and encoders.
https://bugzilla.gnome.org/show_bug.cgi?id=720568
Tim-Philipp Müller [Fri, 10 Jan 2014 14:16:00 +0000 (14:16 +0000)]
matroskademux: don't leak TOC chapter list
Vincent Penquerc'h [Fri, 10 Jan 2014 08:52:16 +0000 (08:52 +0000)]
matroskamux: remove obsolete write-dummy-and-overwrite-on-eos code
The need for rewriting apparently is obsolete 0.10 leftover.
We now have caps for subtitles when we create the headers,
so we always write the correct data in the first place.
Tim-Philipp Müller [Thu, 9 Jan 2014 23:55:16 +0000 (23:55 +0000)]
rtprtxsend: remove duplicate assignment
Coverity CID 1151680
Vincent Penquerc'h [Thu, 9 Jan 2014 18:25:04 +0000 (18:25 +0000)]
matroskamux: write subtitle codec ID and data at start when known
This avoids issues with writing dummy data first, then having
to come back and write correct data later. Doing so prevents
the muxed stream from being actually streamable.
https://bugzilla.gnome.org/show_bug.cgi?id=712134
Sebastian Dröge [Thu, 9 Jan 2014 16:32:15 +0000 (17:32 +0100)]
configure: Include AvailabilityMacros.h for osxvideo check
Otherwise MAC_OS_X_VERSION_MIN_REQUIRED might not be defined
Thiago Santos [Thu, 9 Jan 2014 14:56:31 +0000 (11:56 -0300)]
qtmux: respect the HDLR box string format for mov and isomedia
Mov spec says it uses a pascal style string, while isomedia uses
a null terminated one. Store the current atoms flavor into the HDLR
to be able to generate the correct output.
https://bugzilla.gnome.org/show_bug.cgi?id=705982
Wim Taymans [Wed, 8 Jan 2014 10:28:04 +0000 (11:28 +0100)]
Revert "matroskamux: Use the running time for container timestamps, not buffer timestamps"
This reverts commit
b3aa8755fe07639f22e4104f4932d769d6c9075a.
We are already using the running-time because they were placed on the
buffers with gst_collect_pads_clip_running_time(). Arguably it would be
better to not modify the incomming buffers but collectpads seems to want
to use absolute timestamps from the buffers for finding the best buffer
(this can be changed with a custom compare function..).
Sebastian Dröge [Wed, 8 Jan 2014 09:41:24 +0000 (10:41 +0100)]
configure: Fix AC_COMPILE_IFELSE usage
Sebastian Dröge [Wed, 8 Jan 2014 09:31:18 +0000 (10:31 +0100)]
osxvideosink: Improve configure check for OSX >= 10.6
https://bugzilla.gnome.org/show_bug.cgi?id=721245
Aleix Conchillo Flaqué [Tue, 7 Jan 2014 20:13:51 +0000 (12:13 -0800)]
rtpbin: remove unused list of decoders
remove list of decoders, which are already handled by the list of elements.
https://bugzilla.gnome.org/show_bug.cgi?id=719938
Sebastian Dröge [Wed, 8 Jan 2014 08:46:55 +0000 (09:46 +0100)]
matroskamux: Error out if ADPCM caps don't contain the layout field
Nicola Murino [Fri, 3 Jan 2014 14:25:23 +0000 (15:25 +0100)]
matroskamux: Add support for g726 ADPCM
https://bugzilla.gnome.org/show_bug.cgi?id=720995
Wim Taymans [Tue, 7 Jan 2014 14:04:02 +0000 (15:04 +0100)]
rtspsrc: use new method to get media-type
Use the new method to get the media type of a transport.
Stefan Sauer [Mon, 6 Jan 2014 20:12:17 +0000 (21:12 +0100)]
wavparse: split the test
This way one failure won't shadow the other test and also if one fails we get
better disgnostics through the test-name.
Sebastian Dröge [Mon, 6 Jan 2014 13:54:46 +0000 (14:54 +0100)]
matroskamux: Add HEVC / h265 support
Sebastian Dröge [Mon, 6 Jan 2014 13:54:38 +0000 (14:54 +0100)]
matroskademux: Add HEVC / h265 support
Stefan Sauer [Mon, 6 Jan 2014 12:36:38 +0000 (13:36 +0100)]
wavparse: remove ifdef'ed code
We do have adtl and cue parse as part of toc handling alreday. The fmt code is a left over from <0.10 times.
Stefan Sauer [Mon, 6 Jan 2014 12:32:58 +0000 (13:32 +0100)]
avidemux, waveparse: more logging for unhandled chunks
Always print a warning with the tag and if possible do a memdump.
Stefan Sauer [Sun, 5 Jan 2014 21:47:42 +0000 (22:47 +0100)]
avidemux: expose 'strn' - stream name - as title tag
Stefan Sauer [Sun, 5 Jan 2014 21:41:24 +0000 (22:41 +0100)]
avidemux: parse fuji strd
We can get maker, model and capture date from this chunk.
Fixes #636143
Stefan Sauer [Sun, 5 Jan 2014 20:46:33 +0000 (21:46 +0100)]
avidemux: ... and use the local api both times
Stefan Sauer [Sun, 5 Jan 2014 20:38:14 +0000 (21:38 +0100)]
avidemux: copy the riff api for ncdt into the element
This chunk is avi specific, no need to expose this as public api.
Sebastian Dröge [Sun, 5 Jan 2014 09:28:21 +0000 (10:28 +0100)]
matroskamux: Add missing semicolon from last commit
Sebastian Dröge [Sun, 5 Jan 2014 09:22:37 +0000 (10:22 +0100)]
matroskamux: Use the running time for container timestamps, not buffer timestamps
Buffer timestamps have no real meaning here, and for selecting the next
buffer we already use the running time anyway.
Stefan Sauer [Sat, 4 Jan 2014 20:34:38 +0000 (21:34 +0100)]
avi: use new riff api to extract nikon metadata
Fixes #636143
Julien Isorce [Fri, 1 Nov 2013 16:41:43 +0000 (16:41 +0000)]
rtprtxsend/rtprtxreceive: generate gtk doc
George Kiagiadakis [Mon, 2 Dec 2013 10:26:09 +0000 (11:26 +0100)]
test/check: Verify rtprtxsend::ssrc-map property works as expected
George Kiagiadakis [Fri, 29 Nov 2013 18:35:44 +0000 (19:35 +0100)]
rtprtxreceive: modify to use a payload-type map like rtprtxsend
George Kiagiadakis [Fri, 29 Nov 2013 18:58:26 +0000 (19:58 +0100)]
rtprtxsend: do not keep history of packets with an unknown payload type
This allows to disable retransmission per payload type by not putting
a certain payload type in the map.
Wim Taymans [Thu, 2 Jan 2014 14:18:52 +0000 (15:18 +0100)]
rtprtxsend: Allow SSRC-multiplexing and multiple payload types in the original stream
Conflicts:
tests/examples/rtp/server-rtpaux.c
George Kiagiadakis [Mon, 25 Nov 2013 14:00:45 +0000 (15:00 +0100)]
rtprtxsend: Add an rtx-ssrc property to allow external control of the ssrc
This is useful when one needs to know the SSRC beforehands, so that it can
be used for SRTP for example.