Wander Lairson Costa [Thu, 2 Feb 2023 12:30:20 +0000 (09:30 -0300)]
rtmutex: Ensure that the top waiter is always woken up
commit
db370a8b9f67ae5f17e3d5482493294467784504 upstream.
Let L1 and L2 be two spinlocks.
Let T1 be a task holding L1 and blocked on L2. T1, currently, is the top
waiter of L2.
Let T2 be the task holding L2.
Let T3 be a task trying to acquire L1.
The following events will lead to a state in which the wait queue of L2
isn't empty, but no task actually holds the lock.
T1 T2 T3
== == ==
spin_lock(L1)
| raw_spin_lock(L1->wait_lock)
| rtlock_slowlock_locked(L1)
| | task_blocks_on_rt_mutex(L1, T3)
| | | orig_waiter->lock = L1
| | | orig_waiter->task = T3
| | | raw_spin_unlock(L1->wait_lock)
| | | rt_mutex_adjust_prio_chain(T1, L1, L2, orig_waiter, T3)
spin_unlock(L2) | | | |
| rt_mutex_slowunlock(L2) | | | |
| | raw_spin_lock(L2->wait_lock) | | | |
| | wakeup(T1) | | | |
| | raw_spin_unlock(L2->wait_lock) | | | |
| | | | waiter = T1->pi_blocked_on
| | | | waiter == rt_mutex_top_waiter(L2)
| | | | waiter->task == T1
| | | | raw_spin_lock(L2->wait_lock)
| | | | dequeue(L2, waiter)
| | | | update_prio(waiter, T1)
| | | | enqueue(L2, waiter)
| | | | waiter != rt_mutex_top_waiter(L2)
| | | | L2->owner == NULL
| | | | wakeup(T1)
| | | | raw_spin_unlock(L2->wait_lock)
T1 wakes up
T1 != top_waiter(L2)
schedule_rtlock()
If the deadline of T1 is updated before the call to update_prio(), and the
new deadline is greater than the deadline of the second top waiter, then
after the requeue, T1 is no longer the top waiter, and the wrong task is
woken up which will then go back to sleep because it is not the top waiter.
This can be reproduced in PREEMPT_RT with stress-ng:
while true; do
stress-ng --sched deadline --sched-period
1000000000 \
--sched-runtime
800000000 --sched-deadline \
1000000000 --mmapfork 23 -t 20
done
A similar issue was pointed out by Thomas versus the cases where the top
waiter drops out early due to a signal or timeout, which is a general issue
for all regular rtmutex use cases, e.g. futex.
The problematic code is in rt_mutex_adjust_prio_chain():
// Save the top waiter before dequeue/enqueue
prerequeue_top_waiter = rt_mutex_top_waiter(lock);
rt_mutex_dequeue(lock, waiter);
waiter_update_prio(waiter, task);
rt_mutex_enqueue(lock, waiter);
// Lock has no owner?
if (!rt_mutex_owner(lock)) {
// Top waiter changed
----> if (prerequeue_top_waiter != rt_mutex_top_waiter(lock))
----> wake_up_state(waiter->task, waiter->wake_state);
This only takes the case into account where @waiter is the new top waiter
due to the requeue operation.
But it fails to handle the case where @waiter is not longer the top
waiter due to the requeue operation.
Ensure that the new top waiter is woken up so in all cases so it can take
over the ownerless lock.
[ tglx: Amend changelog, add Fixes tag ]
Fixes:
c014ef69b3ac ("locking/rtmutex: Add wake_state to rt_mutex_waiter")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230117172649.52465-1-wander@redhat.com
Link: https://lore.kernel.org/r/20230202123020.14844-1-wander@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yafang Shao [Sun, 12 Feb 2023 15:13:03 +0000 (15:13 +0000)]
tracing: Fix TASK_COMM_LEN in trace event format file
commit
b6c7abd1c28a63ad633433d037ee15a1bc3023ba upstream.
After commit
3087c61ed2c4 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN"),
the content of the format file under
/sys/kernel/tracing/events/task/task_newtask was changed from
field:char comm[16]; offset:12; size:16; signed:0;
to
field:char comm[TASK_COMM_LEN]; offset:12; size:16; signed:0;
John reported that this change breaks older versions of perfetto.
Then Mathieu pointed out that this behavioral change was caused by the
use of __stringify(_len), which happens to work on macros, but not on enum
labels. And he also gave the suggestion on how to fix it:
:One possible solution to make this more robust would be to extend
:struct trace_event_fields with one more field that indicates the length
:of an array as an actual integer, without storing it in its stringified
:form in the type, and do the formatting in f_show where it belongs.
The result as follows after this change,
$ cat /sys/kernel/tracing/events/task/task_newtask/format
field:char comm[16]; offset:12; size:16; signed:0;
Link: https://lore.kernel.org/lkml/Y+QaZtz55LIirsUO@google.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230210155921.4610-1-laoar.shao@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230212151303.12353-1-laoar.shao@gmail.com
Cc: stable@vger.kernel.org
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Kajetan Puchalski <kajetan.puchalski@arm.com>
CC: Qais Yousef <qyousef@layalina.io>
Fixes:
3087c61ed2c4 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN")
Reported-by: John Stultz <jstultz@google.com>
Debugged-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Friedrich Vock [Thu, 2 Feb 2023 16:21:03 +0000 (17:21 +0100)]
drm/amdgpu: Use the TGID for trace_amdgpu_vm_update_ptes
commit
e53448e0a1efa5133c7db78f1df1f4caf177676b upstream.
The pid field corresponds to the result of gettid() in userspace.
However, userspace cannot reliably attribute PTE events to processes
with just the thread id. This patch allows userspace to easily
attribute PTE update events to specific processes by comparing this
field with the result of getpid().
For attributing events to specific threads, the thread id is also
contained in the common fields of each trace event.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Mon, 6 Feb 2023 04:22:40 +0000 (14:22 +1000)]
powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch
commit
2ea31e2e62bbc4d11c411eeb36f1b02841dbcab1 upstream.
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.
Fixes:
13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guo Ren [Sat, 4 Feb 2023 06:35:31 +0000 (01:35 -0500)]
riscv: kprobe: Fixup misaligned load text
commit
eb7423273cc9922ee2d05bf660c034d7d515bb91 upstream.
The current kprobe would cause a misaligned load for the probe point.
This patch fixup it with two half-word loads instead.
Fixes:
c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230204063531.740220-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guo Ren [Fri, 27 Jan 2023 03:53:06 +0000 (22:53 -0500)]
riscv: Fixup race condition on PG_dcache_clean in flush_icache_pte
commit
950b879b7f0251317d26bae0687e72592d607532 upstream.
In commit
588a513d3425 ("arm64: Fix race condition on PG_dcache_clean
in __sync_icache_dcache()"), we found RISC-V has the same issue as the
previous arm64. The previous implementation didn't guarantee the correct
sequence of operations, which means flush_icache_all() hasn't been
called when the PG_dcache_clean was set. That would cause a risk of page
synchronization.
Fixes:
08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230127035306.1819561-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Wed, 25 Jan 2023 20:23:46 +0000 (12:23 -0800)]
nvdimm: Support sizeof(struct page) > MAX_STRUCT_PAGE_SIZE
commit
c91d713630848460de8669e6570307b7e559863b upstream.
Commit
6e9f05dc66f9 ("libnvdimm/pfn_dev: increase MAX_STRUCT_PAGE_SIZE")
...updated MAX_STRUCT_PAGE_SIZE to account for sizeof(struct page)
potentially doubling in the case of CONFIG_KMSAN=y. Unfortunately this
doubles the amount of capacity stolen from user addressable capacity for
everyone, regardless of whether they are using the debug option. Revert
that change, mandate that MAX_STRUCT_PAGE_SIZE never exceed 64, but
allow for debug scenarios to proceed with creating debug sized page maps
with a compile option to support debug scenarios.
Note that this only applies to cases where the page map is permanent,
i.e. stored in a reservation of the pmem itself ("--map=dev" in "ndctl
create-namespace" terms). For the "--map=mem" case, since the allocation
is ephemeral for the lifespan of the namespace, there are no explicit
restriction. However, the implicit restriction, of having enough
available "System RAM" to store the page map for the typically large
pmem, still applies.
Fixes:
6e9f05dc66f9 ("libnvdimm/pfn_dev: increase MAX_STRUCT_PAGE_SIZE")
Cc: <stable@vger.kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/167467815773.463042.7022545814443036382.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiubo Li [Tue, 7 Feb 2023 05:04:52 +0000 (13:04 +0800)]
ceph: flush cap releases when the session is flushed
commit
e7d84c6a1296d059389f7342d9b4b7defb518d3a upstream.
MDS expects the completed cap release prior to responding to the
session flush for cache drop.
Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/38009
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Evan Quan [Fri, 3 Feb 2023 07:33:59 +0000 (15:33 +0800)]
drm/amd/pm: add SMU 13.0.7 missing GetPptLimit message mapping
commit
0e763afcb50814e256ecb780fcc0f3bade2e1a0c upstream.
Add missing GetPptLimit message mapping.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 3 Feb 2023 16:50:54 +0000 (17:50 +0100)]
pinctrl: qcom: sm8450-lpass-lpi: correct swr_rx_data group
commit
5921b250f43870e7d8044ca14e402292ceb3e3a8 upstream.
According to hardware programming guide, the swr_rx_data pin group has
only two pins (GPIO5 and GPIO6). This is also visible in "struct
sm8450_groups" in the driver - GPIO15 does not have swr_rx_data
function.
Fixes:
ec1652fc4d56 ("pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230203165054.390762-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Cercueil [Wed, 14 Dec 2022 12:37:04 +0000 (13:37 +0100)]
clk: ingenic: jz4760: Update M/N/OD calculation algorithm
commit
ecfb9f404771dde909ce7743df954370933c3be2 upstream.
The previous algorithm was pretty broken.
- The inner loop had a '(m > m_max)' condition, and the value of 'm'
would increase in each iteration;
- Each iteration would actually multiply 'm' by two, so it is not needed
to re-compute the whole equation at each iteration;
- It would loop until (m & 1) == 0, which means it would loop at most
once.
- The outer loop would divide the 'n' value by two at the end of each
iteration. This meant that for a 12 MHz parent clock and a 1.2 GHz
requested clock, it would first try n=12, then n=6, then n=3, then
n=1, none of which would work; the only valid value is n=2 in this
case.
Simplify this algorithm with a single for loop, which decrements 'n'
after each iteration, addressing all of the above problems.
Fixes:
bdbfc029374f ("clk: ingenic: Add support for the JZ4760")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221214123704.7305-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 7 Feb 2023 19:04:30 +0000 (11:04 -0800)]
cxl/region: Fix passthrough-decoder detection
commit
711442e29f16f0d39dd0e2460c9baacfccb9d5a7 upstream.
A passthrough decoder is a decoder that maps only 1 target. It is a
special case because it does not impose any constraints on the
interleave-math as compared to a decoder with multiple targets. Extend
the passthrough case to multi-target-capable decoders that only have one
target selected. I.e. the current code was only considering passthrough
*ports* which are only a subset of the potential passthrough decoder
scenarios.
Fixes:
e4f6dfa9ef75 ("cxl/region: Fix 'distance' calculation with passthrough ports")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167564540422.847146.13816934143225777888.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Ni [Thu, 15 Dec 2022 17:09:14 +0000 (17:09 +0000)]
cxl/region: Fix null pointer dereference for resetting decoder
commit
4fa4302d6dc7de7e8e74dc7405611a2efb4bf54b upstream.
Not all decoders have a reset callback.
The CXL specification allows a host bridge with a single root port to
have no explicit HDM decoders. Currently the region driver assumes there
are none. As such the CXL core creates a special pass through decoder
instance without a commit/reset callback.
Prior to this patch, the ->reset() callback was called unconditionally when
calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge,
1 Root Port, and one directly attached CXL type 3 device or multiple CXL
type 3 devices attached to downstream ports of a switch can cause a null
pointer dereference.
Before the fix, a kernel crash was observed when we destroy the region, and
a pass through decoder is reset.
The issue can be reproduced as below,
1) create a region with a CXL setup which includes a HB with a
single root port under which a memdev is attached directly.
2) destroy the region with cxl destroy-region regionX -f.
Fixes:
176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Cc: <stable@vger.kernel.org>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20221215170909.2650271-1-fan.ni@samsung.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prashant Malani [Wed, 8 Feb 2023 20:53:19 +0000 (20:53 +0000)]
usb: typec: altmodes/displayport: Fix probe pin assign check
commit
54e5c00a4eb0a4c663445b245f641bbfab142430 upstream.
While checking Pin Assignments of the port and partner during probe, we
don't take into account whether the peripheral is a plug or receptacle.
This manifests itself in a mode entry failure on certain docks and
dongles with captive cables. For instance, the Startech.com Type-C to DP
dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail
the Pin Assignment compatibility check, despite it supporting
Pin Assignment C as a UFP.
Update the check to use the correct DP Pin Assign macros that
take the peripheral's receptacle bit into account.
Fixes:
c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Reported-by: Diana Zigterman <dzigterman@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Pearson [Wed, 8 Feb 2023 18:12:23 +0000 (13:12 -0500)]
usb: core: add quirk for Alcor Link AK9563 smartcard reader
commit
303e724d7b1e1a0a93daf0b1ab5f7c4f53543b34 upstream.
The Alcor Link AK9563 smartcard reader used on some Lenovo platforms
doesn't work. If LPM is enabled the reader will provide an invalid
usb config descriptor. Added quirk to disable LPM.
Verified fix on Lenovo P16 G1 and T14 G3
Tested-by: Miroslav Zatko <mzatko@mirexoft.com>
Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anand Jain [Fri, 20 Jan 2023 13:47:16 +0000 (21:47 +0800)]
btrfs: free device in btrfs_close_devices for a single device filesystem
commit
5f58d783fd7823b2c2d5954d1126e702f94bfc4c upstream.
We have this check to make sure we don't accidentally add older devices
that may have disappeared and re-appeared with an older generation from
being added to an fs_devices (such as a replace source device). This
makes sense, we don't want stale disks in our file system. However for
single disks this doesn't really make sense.
I've seen this in testing, but I was provided a reproducer from a
project that builds btrfs images on loopback devices. The loopback
device gets cached with the new generation, and then if it is re-used to
generate a new file system we'll fail to mount it because the new fs is
"older" than what we have in cache.
Fix this by freeing the cache when closing the device for a single device
filesystem. This will ensure that the mount command passed device path is
scanned successfully during the next mount.
CC: stable@vger.kernel.org # 5.10+
Reported-by: Daan De Meyer <daandemeyer@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 10 Jan 2023 14:56:39 +0000 (14:56 +0000)]
btrfs: simplify update of last_dir_index_offset when logging a directory
commit
6afaed53cc9adde69d8a76ff5b4d740d5efbc54c upstream.
When logging a directory, we always set the inode's last_dir_index_offset
to the offset of the last dir index item we found. This is using an extra
field in the log context structure, and it makes more sense to update it
only after we insert dir index items, and we could directly update the
inode's last_dir_index_offset field instead.
So make this simpler by updating the inode's last_dir_index_offset only
when we actually insert dir index keys in the log tree, and getting rid
of the last_dir_item_offset field in the log context structure.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/Y8voyTXdnPDz8xwY@mail.gmail.com/
Reported-by: Hunter Wardlaw <wardlawhunter@gmail.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1207231
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216851
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Tue, 7 Feb 2023 13:04:18 +0000 (14:04 +0100)]
selftests: mptcp: stop tests earlier
commit
070d6dafacbaa9d1f2e4e3edc263853d194af15e upstream.
These 'endpoint' tests from 'mptcp_join.sh' selftest start a transfer in
the background and check the status during this transfer.
Once the expected events have been recorded, there is no reason to wait
for the data transfer to finish. It can be stopped earlier to reduce the
execution time by more than half.
For these tests, the exchanged data were not verified. Errors, if any,
were ignored but that's fine, plenty of other tests are looking at that.
It is then OK to mute stderr now that we are sure errors will be printed
(and still ignored) because the transfer is stopped before the end.
Fixes:
e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 7 Feb 2023 13:04:17 +0000 (14:04 +0100)]
selftests: mptcp: allow more slack for slow test-case
commit
a635a8c3df66ab68dc088c08a4e9e955e22c0e64 upstream.
A test-case is frequently failing on some extremely slow VMs.
The mptcp transfer completes before the script is able to do
all the required PM manipulation.
Address the issue in the simplest possible way, making the
transfer even more slow.
Additionally dump more info in case of failures, to help debugging
similar problems in the future and init dump_stats var.
Fixes:
e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/323
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 7 Feb 2023 13:04:16 +0000 (14:04 +0100)]
mptcp: be careful on subflow status propagation on errors
commit
1249db44a102d9d3541ed7798d4b01ffdcf03524 upstream.
Currently the subflow error report callback unconditionally
propagates the fallback subflow status to the owning msk.
If the msk is already orphaned, the above prevents the code
from correctly tracking the msk moving to the TCP_CLOSE state
and doing the appropriate cleanup.
All the above causes increasing memory usage over time and
sporadic self-tests failures.
There is a great deal of infrastructure trying to propagate
correctly the fallback subflow status to the owning mptcp socket,
e.g. via mptcp_subflow_eof() and subflow_sched_work_if_closed():
in the error propagation path we need only to cope with unorphaned
sockets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/339
Fixes:
15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 7 Feb 2023 13:04:13 +0000 (14:04 +0100)]
mptcp: do not wait for bare sockets' timeout
commit
d4e85922e3e7ef2071f91f65e61629b60f3a9cf4 upstream.
If the peer closes all the existing subflows for a given
mptcp socket and later the application closes it, the current
implementation let it survive until the timewait timeout expires.
While the above is allowed by the protocol specification it
consumes resources for almost no reason and additionally
causes sporadic self-tests failures.
Let's move the mptcp socket to the TCP_CLOSE state when there are
no alive subflows at close time, so that the allocated resources
will be freed immediately.
Fixes:
e16163b6e2b7 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Fri, 3 Feb 2023 19:32:09 +0000 (14:32 -0500)]
net: USB: Fix wrong-direction WARNING in plusb.c
commit
811d581194f7412eda97acc03d17fc77824b561f upstream.
The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:
usb 1-1: BOGUS control dir, pipe
80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
__usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
__dev_open+0x297/0x4d0 net/core/dev.c:1417
__dev_change_flags+0x587/0x750 net/core/dev.c:8530
dev_change_flags+0x97/0x170 net/core/dev.c:8602
devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
sock_do_ioctl+0xcc/0x230 net/socket.c:1169
sock_ioctl+0x1f8/0x680 net/socket.c:1286
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag.
Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes:
090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZhaoLong Wang [Mon, 6 Feb 2023 01:10:09 +0000 (09:10 +0800)]
cifs: Fix use-after-free in rdata->read_into_pages()
commit
aa5465aeca3c66fecdf7efcf554aed79b4c4b211 upstream.
When the network status is unstable, use-after-free may occur when
read data from the server.
BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0
Call Trace:
<TASK>
dump_stack_lvl+0x38/0x4c
print_report+0x16f/0x4a6
kasan_report+0xb7/0x130
readpages_fill_pages+0x14c/0x7e0
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 2535:
kasan_save_stack+0x22/0x50
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x82/0x90
cifs_readdata_direct_alloc+0x2c/0x110
cifs_readdata_alloc+0x2d/0x60
cifs_readahead+0x393/0xfe0
read_pages+0x12f/0x470
page_cache_ra_unbounded+0x1b1/0x240
filemap_get_pages+0x1c8/0x9a0
filemap_read+0x1c0/0x540
cifs_strict_readv+0x21b/0x240
vfs_read+0x395/0x4b0
ksys_read+0xb8/0x150
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 79:
kasan_save_stack+0x22/0x50
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2e/0x50
__kasan_slab_free+0x10e/0x1a0
__kmem_cache_free+0x7a/0x1a0
cifs_readdata_release+0x49/0x60
process_one_work+0x46c/0x760
worker_thread+0x2a4/0x6f0
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
Last potentially related work creation:
kasan_save_stack+0x22/0x50
__kasan_record_aux_stack+0x95/0xb0
insert_work+0x2b/0x130
__queue_work+0x1fe/0x660
queue_work_on+0x4b/0x60
smb2_readv_callback+0x396/0x800
cifs_abort_connection+0x474/0x6a0
cifs_reconnect+0x5cb/0xa50
cifs_readv_from_socket.cold+0x22/0x6c
cifs_read_page_from_socket+0xc1/0x100
readpages_fill_pages.cold+0x2f/0x46
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
The following function calls will cause UAF of the rdata pointer.
readpages_fill_pages
cifs_read_page_from_socket
cifs_readv_from_socket
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->callback() --> smb2_readv_callback
queue_work(&rdata->work) # if the worker completes first,
# the rdata is freed
cifs_readv_complete
kref_put
cifs_readdata_release
kfree(rdata)
return rdata->... # UAF in readpages_fill_pages()
Similarly, this problem also occurs in the uncache_fill_pages().
Fix this by adjusts the order of condition judgment in the return
statement.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 6 Feb 2023 14:15:59 +0000 (16:15 +0200)]
pinctrl: intel: Restore the pins that used to be in Direct IRQ mode
[ Upstream commit
a8520be3ffef3d25b53bf171a7ebe17ee0154175 ]
If the firmware mangled the register contents too much,
check the saved value for the Direct IRQ mode. If it
matches, we will restore the pin state.
Reported-by: Jim Minter <jimminter@microsoft.com>
Fixes:
6989ea4881c8 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode")
Tested-by: Jim Minter <jimminter@microsoft.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Mon, 30 Jan 2023 22:08:45 +0000 (08:38 +1030)]
pinctrl: aspeed: Revert "Force to disable the function's signal"
[ Upstream commit
606d4ef4922662ded34aa7218288c3043ce0a41a ]
This reverts commit
cf517fef601b9dde151f0afc27164d13bf1fd907.
The commit
cf517fef601b ("pinctrl: aspeed: Force to disable the
function's signal") exposed a problem with fetching the regmap for
reading the GFX register.
The Romulus machine the device tree contains a gpio hog for GPIO S7.
With the patch applied:
Muxing pin 151 for GPIO
Disabling signal VPOB9 for VPO
aspeed-g5-pinctrl
1e6e2080.pinctrl: Failed to acquire regmap for IP block 1
aspeed-g5-pinctrl
1e6e2080.pinctrl: request() failed for pin 151
The code path is aspeed-gpio -> pinmux-g5 -> regmap -> clk, and the
of_clock code returns an error as it doesn't have a valid struct clk_hw
pointer. The regmap call happens because pinmux wants to check the GFX
node (IP block 1) to query bits there.
For reference, before the offending patch:
Muxing pin 151 for GPIO
Disabling signal VPOB9 for VPO
Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000
Disabling signal VPOB9 for VPOOFF1
Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000
Disabling signal VPOB9 for VPOOFF2
Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000
Enabling signal GPIOS7 for GPIOS7
Muxed pin 151 as GPIOS7
gpio-943 (seq_cont): hogged as output/low
We can't skip the clock check to allow pinmux to proceed, because the
write to disable VPOB9 will try to set a bit in the GFX register space
which will not stick when the IP is in reset. However, we do not want to
enable the IP just so pinmux can do a disable-enable dance for the pin.
For now, revert the offending patch while a correct solution is found.
Fixes:
cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal")
Link: https://github.com/openbmc/linux/issues/218
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230130220845.917985-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Fri, 13 Jan 2023 18:59:42 +0000 (21:59 +0300)]
spi: dw: Fix wrong FIFO level setting for long xfers
[ Upstream commit
c63b8fd14a7db719f8252038a790638728c4eb66 ]
Due to using the u16 type in the min_t() macros the SPI transfer length
will be cast to word before participating in the conditional statement
implied by the macro. Thus if the transfer length is greater than 64KB the
Tx/Rx FIFO threshold level value will be determined by the leftover of the
truncated after the type-case length. In the worst case it will cause the
dramatical performance drop due to the "Tx FIFO Empty" or "Rx FIFO Full"
interrupts triggered on each xfer word sent/received to/from the bus.
The problem can be easily fixed by specifying the unsigned int type in the
min_t() macros thus preventing the possible data loss.
Fixes:
ea11370fffdf ("spi: dw: get TX level without an additional variable")
Reported-by: Sergey Nazarov <Sergey.Nazarov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230113185942.2516-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Korotkov [Fri, 18 Nov 2022 10:43:32 +0000 (13:43 +0300)]
pinctrl: single: fix potential NULL dereference
[ Upstream commit
d2d73e6d4822140445ad4a7b1c6091e0f5fe703b ]
Added checking of pointer "function" in pcs_set_mux().
pinmux_generic_get_function() can return NULL and the pointer
"function" was dereferenced without checking against NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221118104332.943-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Thu, 19 Jan 2023 23:18:56 +0000 (09:48 +1030)]
pinctrl: aspeed: Fix confusing types in return value
[ Upstream commit
287a344a11f1ebd31055cf9b22c88d7005f108d7 ]
The function signature is int, but we return a bool. Instead return a
negative errno as the kerneldoc suggests.
Fixes:
4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20230119231856.52014-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guodong Liu [Wed, 18 Jan 2023 06:21:16 +0000 (14:21 +0800)]
pinctrl: mediatek: Fix the drive register definition of some Pins
[ Upstream commit
5754a1c98b18009cb3030dc391aa37b77428a0bd ]
The drive adjustment register definition of gpio13 and gpio81 is wrong:
"the start address for the range" of gpio18 is corrected to 0x000,
"the start bit for the first register within the range" of gpio81 is
corrected to 24.
Fixes:
6cf5e9ef362a ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Link: https://lore.kernel.org/r/20230118062116.26315-1-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Tue, 3 Jan 2023 16:45:30 +0000 (17:45 +0100)]
clk: microchip: mpfs-ccc: Use devm_kasprintf() for allocating formatted strings
[ Upstream commit
86d884f5287f4369c198811aaa4931a3a11f36d2 ]
In various places, string buffers of a fixed size are allocated, and
filled using snprintf() with the same fixed size, which is error-prone.
Replace this by calling devm_kasprintf() instead, which always uses the
appropriate size.
While at it, remove an unneeded intermediate variable, which allows us
to drop a cast as a bonus.
With the initial behavior it would have been possible to have a device tree
with a node address that would make "ccc<node_address>_pll<N>" exceed
18 characters. If that happened, the <N> would be cut off & both
pll 0 & 1 would be named identically. If that happens, pll1 would fail
to register. Thus, the fixes tag has been added to this commit.
Fixes:
d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
[claudiu.beznea: added the rationale behind fixes tag]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/f904fd28b2087d1463ea65f059924e3b1acc193c.1672764239.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amadeusz Sławiński [Tue, 7 Feb 2023 21:04:28 +0000 (22:04 +0100)]
ASoC: topology: Return -ENOMEM on memory allocation failure
[ Upstream commit
c173ee5b2fa6195066674d66d1d7e191010fb1ff ]
When handling error path, ret needs to be set to correct value.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Fixes:
d29d41e28eea ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230207210428.2076354-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Tue, 7 Feb 2023 09:04:24 +0000 (17:04 +0800)]
ASoC: fsl_sai: fix getting version from VERID
[ Upstream commit
29aab38823b61e482995c24644bd2d8acfe56185 ]
The version information is at the bit31 ~ bit16 in the VERID
register, so need to right shift 16bit to get it, otherwise
the result of comparison "sai->verid.version >= 0x0301" is
wrong.
Fixes:
99c1e74f25d4 ("ASoC: fsl_sai: store full version instead of major/minor")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1675760664-25193-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Beer [Thu, 27 Oct 2022 08:38:38 +0000 (21:38 +1300)]
ASoC: tas5805m: add missing page switch.
[ Upstream commit
e0576cd642ced1ac65370b4516b7be9f536a0498 ]
In tas5805m_refresh, we switch pages to update the DSP volume control,
but we need to switch back to page 0 before trying to alter the
soft-mute control. This latter page-switch was missing.
Fixes:
ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/1fea38a71ea6ab0225d19ab28d1fa12828d762d0.1675497326.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Beer [Thu, 27 Oct 2022 08:28:31 +0000 (21:28 +1300)]
ASoC: tas5805m: rework to avoid scheduling while atomic.
[ Upstream commit
147323792693bf013f60dca160be1d32bd4d180a ]
There's some setup we need to do in order to get the DSP initialized,
and this can't be done until a bit-clock is ready. In an earlier version
of this driver, this work was done in a DAPM callback.
The DAPM callback doesn't guarantee that the bit-clock is running, so
the work was moved instead to the trigger callback. Unfortunately this
callback runs in atomic context, and the setup code needs to do I2C
transactions.
Here we use a work_struct to kick off the setup in a thread instead.
Fixes:
ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/85d8ba405cb009a7a3249b556dc8f3bdb1754fdf.1675497326.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Thu, 2 Feb 2023 10:40:14 +0000 (18:40 +0800)]
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
[ Upstream commit
97801cfcf9565247bcc53b67ea47fa87b1704375 ]
When vdosys1 was initially added, it was incorrectly assumed to be
compatible with vdosys0, and thus both had the same mt8195-mmsys
compatible attached.
This has since been corrected in commit
b237efd47df7 ("dt-bindings:
arm: mediatek: mmsys: change compatible for MT8195") and commit
82219cfbef18 ("dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible
for MT8195"). The device tree needs to be fixed as well, otherwise
the vdosys1 block fails to work, and causes its dependent power domain
controller to not work either.
Change the compatible string of vdosys1 to "mediatek,mt8195-vdosys1".
While at it, also add the new "mediatek,mt8195-vdosys0" compatible to
vdosys0.
Fixes:
6aa5b46d1755 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230202104014.2931517-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Shixin [Wed, 7 Dec 2022 02:50:38 +0000 (10:50 +0800)]
riscv: stacktrace: Fix missing the first frame
[ Upstream commit
cb80242cc679d6397e77d8a964deeb3ff218d2b5 ]
When running kfence_test, I found some testcases failed like this:
# test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346
Expected report_matches(&expect) to be true, but is false
not ok 1 - test_out_of_bounds_read
The corresponding call-trace is:
BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84
Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10):
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
The kfence_test using the first frame of call trace to check whether the
testcase is succeed or not. Commit
6a00ef449370 ("riscv: eliminate
unreliable __builtin_frame_address(1)") skip first frame for all
case, which results the kfence_test failed. Indeed, we only need to skip
the first frame for case (task==NULL || task==current).
With this patch, the call-trace will be:
BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e
Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7):
test_out_of_bounds_read+0x88/0x19e
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
Fixes:
6a00ef449370 ("riscv: eliminate unreliable __builtin_frame_address(1)")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 31 Jan 2023 10:02:13 +0000 (13:02 +0300)]
ALSA: pci: lx6464es: fix a debug loop
[ Upstream commit
5dac9f8dc25fefd9d928b98f6477ff3daefd73e3 ]
This loop accidentally reuses the "i" iterator for both the inside and
the outside loop. The value of MAX_STREAM_BUFFER is 5. I believe that
chip->rmh.stat_len is in the 2-12 range. If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.
It looks like it was supposed to combined into one loop where
conditions are checked.
Fixes:
8e6320064c33 ("ALSA: lx_core: Remove useless #if 0 .. #endif")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y9jnJTis/mRFJAQp@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Johansen [Sat, 28 Jan 2023 11:24:32 +0000 (12:24 +0100)]
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
[ Upstream commit
bc121b707e816616567683e51fd9194c2309977a ]
As other rk336x based devices, the Rock 3 Model A has issues with high
speed SD cards, so lower the speed to 50 instead of 104 in the same
manor has the Quartz64 Model B has.
Fixes:
22a442e6586c ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20230128112432.132302-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaud Ferraris [Thu, 15 Dec 2022 10:19:47 +0000 (11:19 +0100)]
arm64: dts: rockchip: fix input enable pinconf on rk3399
[ Upstream commit
6f515b663d49a14fb63f8c5d0a2a4ae53d44790a ]
When the input enable pinconf was introduced, a default drive-strength
value of 2 was set for the pull up/down configs. However, this parameter
is unneeded when configuring the pin as input, and having a single
hardcoded value here is actually harmful: GPIOs on the RK3399 have
various same drive-strength capabilities depending on the bank and port
they belong to.
As an example, trying to configure the GPIO4_PD3 pin as an input with
pull-up enabled fails with the following output:
[ 10.706542] rockchip-pinctrl pinctrl: unsupported driver strength 2
[ 10.713661] rockchip-pinctrl pinctrl: pin_config_set op failed for pin 155
(acceptable drive-strength values for this pin being 3, 6, 9 and 12)
Let's drop the drive-strength property from all input pinconfs in order
to solve this issue.
Fixes:
ec48c3e82ca3 ("arm64: dts: rockchip: add an input enable pinconf to rk3399")
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20221215101947.254896-1-arnaud.ferraris@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Wed, 8 Feb 2023 03:21:10 +0000 (11:21 +0800)]
selftests: forwarding: lib: quote the sysctl values
[ Upstream commit
3a082086aa200852545cf15159213582c0c80eba ]
When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range
Fixes:
f5ae57784ba8 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Tue, 7 Feb 2023 18:31:17 +0000 (20:31 +0200)]
net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
[ Upstream commit
2fcde9fe258ec8b88d41def38e43ca4da32c0a9a ]
While running this selftest which usually passes:
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: swp0: Multicast IPv4 to joined group [ OK ]
TEST: swp0: Multicast IPv4 to unknown group [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: swp0: Multicast IPv6 to joined group [ OK ]
TEST: swp0: Multicast IPv6 to unknown group [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ]
if I start PTP timestamping then run it again (debug prints added by me),
the unknown IPv6 MC traffic is seen by the CPU port even when it should
have been dropped:
~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m
ptp4l[225.410]: selected /dev/ptp1 as PTP clock
[ 225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap
[ 225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap
[ 225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap
[ 225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap
[ 225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap
ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
^C
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: swp0: Multicast IPv4 to joined group [ OK ]
TEST: swp0: Multicast IPv4 to unknown group [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: swp0: Multicast IPv6 to joined group [ OK ]
TEST: swp0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ]
The PGID_MCIPV6 is configured correctly to not flood to the CPU,
I checked that.
Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do
that when it exists), packets are RX filtered again as they should be:
~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0
[ 218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap
[ 218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap
[ 218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap
[ 218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap
[ 218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap
current settings:
tx_type 1
rx_filter 12
new settings:
tx_type 1
rx_filter 0
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: swp0: Multicast IPv4 to joined group [ OK ]
TEST: swp0: Multicast IPv4 to unknown group [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: swp0: Multicast IPv6 to joined group [ OK ]
TEST: swp0: Multicast IPv6 to unknown group [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ]
So it's clear that something in the PTP RX trapping logic went wrong.
Looking a bit at the code, I can see that there are 4 typos, which
populate "ipv4" VCAP IS2 key filter fields for IPv6 keys.
VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are
handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at
&filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6.
Simply put, when we populate the wrong key field, &filter->key.ipv6
fields "proto.mask" and "proto.value" remain all zeroes (or "don't care").
So is2_entry_set() will enter the "else" of this "if" condition:
if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP))
and proceed to ignore the "proto" field. The resulting rule will match
on all IPv6 traffic, trapping it to the CPU.
This is the reason why the local_termination.sh selftest sees it,
because control traps are stronger than the PGID_MCIPV6 used for
flooding (from the forwarding data path).
But the problem is in fact much deeper. We trap all IPv6 traffic to the
CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software
forwarding will not take place and IPv6 traffic will never reach its
destination.
The fix is simple - correct the typos.
I was intentionally inaccurate in the commit message about the breakage
occurring when any PTP timestamping is enabled. In fact it only happens
when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or
HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX
timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT.
I wanted people skimming through git logs to not think that the bug
doesn't affect them because they only use ptp4l in L2 mode.
Fixes:
96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230207183117.1745754-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pietro Borrello [Tue, 7 Feb 2023 18:26:34 +0000 (18:26 +0000)]
rds: rds_rm_zerocopy_callback() use list_first_entry()
[ Upstream commit
f753a68980cf4b59a80fe677619da2b1804f526d ]
rds_rm_zerocopy_callback() uses list_entry() on the head of a list
causing a type confusion.
Use list_first_entry() to actually access the first element of the
rs_zcookie_queue list.
Fixes:
9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Tue, 7 Feb 2023 14:18:19 +0000 (16:18 +0200)]
selftests: Fix failing VXLAN VNI filtering test
[ Upstream commit
b963d9d5b9437a6b99504987310f98537c9e77d4 ]
iproute2 does not recognize the "group6" and "remote6" keywords. Fix by
using "group" and "remote" instead.
Before:
# ./test_vxlan_vnifiltering.sh
[...]
Tests passed: 25
Tests failed: 2
After:
# ./test_vxlan_vnifiltering.sh
[...]
Tests passed: 27
Tests failed: 0
Fixes:
3edf5f66c12a ("selftests: add new tests for vxlan vnifiltering")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kevin Yang [Tue, 7 Feb 2023 02:08:20 +0000 (02:08 +0000)]
txhash: fix sk->sk_txrehash default
[ Upstream commit
c11204c78d6966c5bda6dd05c3ac5cbb193f93e3 ]
This code fix a bug that sk->sk_txrehash gets its default enable
value from sysctl_txrehash only when the socket is a TCP listener.
We should have sysctl_txrehash to set the default sk->sk_txrehash,
no matter TCP, nor listerner/connector.
Tested by following packetdrill:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4
// SO_TXREHASH == 74, default to sysctl_txrehash == 1
+0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0
+0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0
Fixes:
26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tariq Toukan [Mon, 6 Feb 2023 20:47:03 +0000 (22:47 +0200)]
net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
[ Upstream commit
c966153d120222cd4e85e1e1601584d7d4d91dcb ]
Parameters 'queue_index' and 'napi_id' are passed in a swapped order.
Fix it here.
Fixes:
23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Neftin [Mon, 6 Feb 2023 23:58:18 +0000 (15:58 -0800)]
igc: Add ndo_tx_timeout support
[ Upstream commit
9b275176270efd18f2f4e328b32be1bad34c4c0d ]
On some platforms, 100/1000/2500 speeds seem to have sometimes problems
reporting false positive tx unit hang during stressful UDP traffic. Likely
other Intel drivers introduce responses to a tx hang. Update the 'tx hang'
comparator with the comparison of the head and tail of ring pointers and
restore the tx_timeout_factor to the previous value (one).
This can be test by using netperf or iperf3 applications.
Example:
iperf3 -s -p 5001
iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0
netserver -p 16604
netperf -H 192.168.0.2 -l 600 -p 16604 -t UDP_STREAM -- -m 64000
Fixes:
b27b8dc77b5e ("igc: Increase timeout value for Speed 100/1000/2500")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230206235818.662384-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shay Drory [Wed, 14 Dec 2022 20:16:23 +0000 (22:16 +0200)]
net/mlx5: Serialize module cleanup with reload and remove
[ Upstream commit
8f0d1451ecf7b3bd5a06ffc866c753d0f3ab4683 ]
Currently, remove and reload flows can run in parallel to module cleanup.
This design is error prone. For example: aux_drivers callbacks are called
from both cleanup and remove flows with different lockings, which can
cause a deadlock[1].
Hence, serialize module cleanup with reload and remove.
[1]
cleanup remove
------- ------
auxiliary_driver_unregister();
devl_lock()
auxiliary_device_delete(mlx5e_aux)
device_lock(mlx5e_aux)
devl_lock()
device_lock(mlx5e_aux)
Fixes:
912cebf420c2 ("net/mlx5e: Connect ethernet part to auxiliary bus")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shay Drory [Wed, 25 Jan 2023 15:39:36 +0000 (17:39 +0200)]
net/mlx5: fw_tracer, Zero consumer index when reloading the tracer
[ Upstream commit
184e1e4474dbcfebc4dbd1fa823a329978f25506 ]
When tracer is reloaded, the device will log the traces at the
beginning of the log buffer. Also, driver is reading the log buffer in
chunks in accordance to the consumer index.
Hence, zero consumer index when reloading the tracer.
Fixes:
4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shay Drory [Mon, 9 Jan 2023 13:27:40 +0000 (15:27 +0200)]
net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers
[ Upstream commit
db561fed6b8fa3878e74d5df6512a4a38152b63e ]
Whenever the driver is reading the string DBs into buffers, the driver
is setting the load bit, but the driver never clears this bit.
As a result, in case load bit is on and the driver query the device for
new string DBs, the driver won't read again the string DBs.
Fix it by clearing the load bit when query the device for new string
DBs.
Fixes:
2d69356752ff ("net/mlx5: Add support for fw live patch event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maher Sanalla [Sun, 22 Jan 2023 21:24:56 +0000 (23:24 +0200)]
net/mlx5: Expose SF firmware pages counter
[ Upstream commit
9965bbebae59b3563a4d95e4aed121e8965dfdc2 ]
Currently, each core device has VF pages counter which stores number of
fw pages used by its VFs and SFs.
The current design led to a hang when performing firmware reset on DPU,
where the DPU PFs stalled in sriov unload flow due to waiting on release
of SFs pages instead of waiting on only VFs pages.
Thus, Add a separate counter for SF firmware pages, which will prevent
the stall scenario described above.
Fixes:
1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maher Sanalla [Sun, 22 Jan 2023 19:09:40 +0000 (21:09 +0200)]
net/mlx5: Store page counters in a single array
[ Upstream commit
c3bdbaea654d8df39112de33037106134a520dc7 ]
Currently, an independent page counter is used for tracking memory usage
for each function type such as VF, PF and host PF (DPU).
For better code-readibilty, use a single array that stores
the number of allocated memory pages for each function type.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of:
9965bbebae59 ("net/mlx5: Expose SF firmware pages counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tatulea [Mon, 23 Jan 2023 14:06:32 +0000 (16:06 +0200)]
net/mlx5e: IPoIB, Show unknown speed instead of error
[ Upstream commit
8aa5f171d51c1cb69e5e3106df4dd1a446102823 ]
ethtool is returning an error for unknown speeds for the IPoIB interface:
$ ethtool ib0
netlink error: failed to retrieve link settings
netlink error: Invalid argument
netlink error: failed to retrieve link settings
netlink error: Invalid argument
Settings for ib0:
Link detected: no
After this change, ethtool will return success and show "unknown speed":
$ ethtool ib0
Settings for ib0:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: no
Fixes:
eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amir Tzin [Sun, 8 Jan 2023 13:54:46 +0000 (15:54 +0200)]
net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode
[ Upstream commit
8974aa9638df557f4642acef707af15648a03555 ]
Moving to switchdev mode with rx-vlan-filter on and then setting it off
causes the kernel to crash since fs->vlan is freed during nic profile
cleanup flow.
RX VLAN filtering is not supported in switchdev mode so unset it when
changing to switchdev and restore its value when switching back to
legacy.
trace:
[] RIP: 0010:mlx5e_disable_cvlan_filter+0x43/0x70
[] set_feature_cvlan_filter+0x37/0x40 [mlx5_core]
[] mlx5e_handle_feature+0x3a/0x60 [mlx5_core]
[] mlx5e_set_features+0x6d/0x160 [mlx5_core]
[] __netdev_update_features+0x288/0xa70
[] ethnl_set_features+0x309/0x380
[] ? __nla_parse+0x21/0x30
[] genl_family_rcv_msg_doit.isra.17+0x110/0x150
[] genl_rcv_msg+0x112/0x260
[] ? features_reply_size+0xe0/0xe0
[] ? genl_family_rcv_msg_doit.isra.17+0x150/0x150
[] netlink_rcv_skb+0x4e/0x100
[] genl_rcv+0x24/0x40
[] netlink_unicast+0x1ab/0x290
[] netlink_sendmsg+0x257/0x4f0
[] sock_sendmsg+0x5c/0x70
Fixes:
cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Thu, 26 Jan 2023 13:47:12 +0000 (14:47 +0100)]
net/mlx5: Bridge, fix ageing of peer FDB entries
[ Upstream commit
da0c52426cd23f8728eff72c2b2d2a3eb6b451f5 ]
SWITCHDEV_FDB_ADD_TO_BRIDGE event handler that updates FDB entry 'lastuse'
field is only executed for eswitch that owns the entry. However, if peer
entry processed packets at least once it will have hardware counter 'used'
value greater than entry 'lastuse' from that point on, which will cause FDB
entry not being aged out.
Process the event on all eswitch instances.
Fixes:
ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adham Faris [Sun, 8 Jan 2023 16:09:32 +0000 (18:09 +0200)]
net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change
[ Upstream commit
1e66220948df815d7b37e0ff8b4627ce10433738 ]
rq->hw_mtu is used in function en_rx.c/mlx5e_skb_from_cqe_mpwrq_linear()
to catch oversized packets. If FCS is concatenated to the end of the
packet then the check should be updated accordingly.
Rx rings initialization (mlx5e_init_rxq_rq()) invoked for every new set
of channels, as part of mlx5e_safe_switch_params(), unknowingly if it
runs with default configuration or not. Current rq->hw_mtu
initialization assumes default configuration and ignores
params->scatter_fcs_en flag state.
Fix this, by accounting for params->scatter_fcs_en flag state during
rq->hw_mtu initialization.
In addition, updating rq->hw_mtu value during ingress traffic might
lead to packets drop and oversize_pkts_sw_drop counter increase with no
good reason. Hence we remove this optimization and switch the set of
channels with a new one, to make sure we don't get false positives on
the oversize_pkts_sw_drop counter.
Fixes:
102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Sun, 5 Feb 2023 19:24:08 +0000 (21:24 +0200)]
net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"
[ Upstream commit
f964f8399df29d3e3ced77177cf35131cd2491bf ]
Alternative short title: don't instruct the hardware to match on
EtherType with "protocol 802.1Q" flower filters. It doesn't work for the
reasons detailed below.
With a command such as the following:
tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
action vlan modify id 300 \
action goto chain $(IS2 0 0)
the created filter is set by ocelot_flower_parse_key() to be of type
OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}.
This gets propagated all the way to is1_entry_set() which commits it to
hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the
case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY,
and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE.
The problem is that for VLAN-tagged frames, the hardware interprets the
ETYPE field as holding the encapsulated VLAN protocol. So the above
filter will only match those packets which have an encapsulated protocol
of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac.
The reason why this is allowed to occur is because, although we have a
block of code in ocelot_flower_parse_key() which sets "match_protocol"
to false when VLAN keys are present, that code executes too late.
There is another block of code, which executes for Ethernet addresses,
and has a "goto finished_key_parsing" and skips the VLAN header parsing.
By skipping it, "match_protocol" remains with the value it was
initialized with, i.e. "true", and "proto" is set to f->common.protocol,
or 0x8100.
The concept of ignoring some keys rather than erroring out when they are
present but can't be offloaded is dubious in itself, but is present
since the initial commit
fe3490e6107e ("net: mscc: ocelot: Hardware
ofload for tc flower filter"), and it's outside of the scope of this
patch to change that.
The problem was introduced when the driver started to interpret the
flower filter's protocol, and populate the VCAP filter's ETYPE field
based on it.
To fix this, it is sufficient to move the code that parses the VLAN keys
earlier than the "goto finished_key_parsing" instruction. This will
ensure that if we have a flower filter with both VLAN and Ethernet
address keys, it won't match on ETYPE 0x8100, because the VLAN key
parsing sets "match_protocol = false".
Fixes:
86b956de119c ("net: mscc: ocelot: support matching on EtherType")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Sun, 5 Feb 2023 14:07:13 +0000 (16:07 +0200)]
net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-aware
[ Upstream commit
0b6d6425103a676e2b6a81f3fd35d7ea4f9b90ec ]
Frank reports that in a mt7530 setup where some ports are standalone and
some are in a VLAN-aware bridge, 8021q uppers of the standalone ports
lose their VLAN tag on xmit, as seen by the link partner.
This seems to occur because once the other ports join the VLAN-aware
bridge, mt7530_port_vlan_filtering() also calls
mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way
that the switch processes the traffic of the standalone port.
Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it:
EG_TAG: Incoming Port Egress Tag VLAN Attribution
0: disabled (system default)
1: consistent (keep the original ingress tag attribute)
My interpretation is that this setting applies on the ingress port, and
"disabled" is basically the normal behavior, where the egress tag format
of the packet (tagged or untagged) is decided by the VLAN table
(MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG).
But there is also an option of overriding the system default behavior,
and for the egress tagging format of packets to be decided not by the
VLAN table, but simply by copying the ingress tag format (if ingress was
tagged, egress is tagged; if ingress was untagged, egress is untagged;
aka "consistent). This is useful in 2 scenarios:
- VLAN-unaware bridge ports will always encounter a miss in the VLAN
table. They should forward a packet as-is, though. So we use
"consistent" there. See commit
e045124e9399 ("net: dsa: mt7530: fix
tagged frames pass-through in VLAN-unaware mode").
- Traffic injected from the CPU port. The operating system is in god
mode; if it wants a packet to exit as VLAN-tagged, it sends it as
VLAN-tagged. Otherwise it sends it as VLAN-untagged*.
*This is true only if we don't consider the bridge TX forwarding offload
feature, which mt7530 doesn't support.
So for now, make the CPU port always stay in "consistent" mode to allow
software VLANs to be forwarded to their egress ports with the VLAN tag
intact, and not stripped.
Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/
Fixes:
e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Mon, 12 Dec 2022 23:11:26 +0000 (15:11 -0800)]
ice: switch: fix potential memleak in ice_add_adv_recipe()
[ Upstream commit
4a606ce68426c88ff2563382b33cc34f3485fe57 ]
When ice_add_special_words() fails, the 'rm' is not released, which will
lead to a memory leak. Fix this up by going to 'err_unroll' label.
Compile tested only.
Fixes:
8b032a55c1bd ("ice: low level support for tunnels")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brett Creeley [Mon, 16 Jan 2023 12:34:58 +0000 (13:34 +0100)]
ice: Fix disabling Rx VLAN filtering with port VLAN enabled
[ Upstream commit
c793f8ea15e312789b5b6b4a5e7b0b92315be5cb ]
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN
filtering will be disabled if the VF requests to enable promiscuous
mode. When the VF is in a port VLAN, this is the incorrect behavior
because it will allow the VF to receive traffic outside of its port VLAN
domain. Fortunately this only resulted in the VF(s) receiving broadcast
traffic outside of the VLAN domain because all of the VLAN promiscuous
rules are based on the port VLAN ID. Fix this by setting the
.disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on
the VF.
Also, make sure to make this fix for both Single VLAN Mode and Double
VLAN Mode enabled devices.
Fixes:
c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anirudh Venkataramanan [Mon, 30 Jan 2023 22:06:40 +0000 (14:06 -0800)]
ice: Do not use WQ_MEM_RECLAIM flag for workqueue
[ Upstream commit
4d159f7884f78b1aacb99b4fc37d1e3cb1194e39 ]
When both ice and the irdma driver are loaded, a warning in
check_flush_dependency is being triggered. This is due to ice driver
workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one
is not.
According to kernel documentation, this flag should be set if the
workqueue will be involved in the kernel's memory reclamation flow.
Since it is not, there is no need for the ice driver's WQ to have this
flag set so remove it.
Example trace:
[ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0
[ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha
in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel
_rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1
0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_
core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs
ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter
acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba
ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[ +0.000161] [last unloaded: bonding]
[ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1
[ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.
010620200716 01/06/2020
[ +0.000003] Workqueue: ice ice_service_task [ice]
[ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0
[ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08
9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06
[ +0.000004] RSP: 0018:
ffff88810a39f990 EFLAGS:
00010282
[ +0.000005] RAX:
0000000000000000 RBX:
ffff888141bc2400 RCX:
0000000000000000
[ +0.000004] RDX:
0000000000000001 RSI:
dffffc0000000000 RDI:
ffffffffa1213a80
[ +0.000003] RBP:
ffff888194bf3400 R08:
ffffed117b306112 R09:
ffffed117b306112
[ +0.000003] R10:
ffff888bd983088b R11:
ffffed117b306111 R12:
0000000000000000
[ +0.000003] R13:
ffff888111f84d00 R14:
ffff88810a3943ac R15:
ffff888194bf3400
[ +0.000004] FS:
0000000000000000(0000) GS:
ffff888bd9800000(0000) knlGS:
0000000000000000
[ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ +0.000003] CR2:
000056035b208b60 CR3:
000000017795e005 CR4:
00000000007706f0
[ +0.000003] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ +0.000003] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ +0.000002] PKRU:
55555554
[ +0.000003] Call Trace:
[ +0.000002] <TASK>
[ +0.000003] __flush_workqueue+0x203/0x840
[ +0.000006] ? mutex_unlock+0x84/0xd0
[ +0.000008] ? __pfx_mutex_unlock+0x10/0x10
[ +0.000004] ? __pfx___flush_workqueue+0x10/0x10
[ +0.000006] ? mutex_lock+0xa3/0xf0
[ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core]
[ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core]
[ +0.000094] ib_unregister_device+0x25/0x30 [ib_core]
[ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma]
[ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma]
[ +0.000059] ? up_write+0x5c/0x90
[ +0.000005] irdma_remove+0x36/0x90 [irdma]
[ +0.000062] auxiliary_bus_remove+0x32/0x50
[ +0.000007] device_release_driver_internal+0xfa/0x1c0
[ +0.000005] bus_remove_device+0x18a/0x260
[ +0.000007] device_del+0x2e5/0x650
[ +0.000005] ? __pfx_device_del+0x10/0x10
[ +0.000003] ? mutex_unlock+0x84/0xd0
[ +0.000004] ? __pfx_mutex_unlock+0x10/0x10
[ +0.000004] ? _raw_spin_unlock+0x18/0x40
[ +0.000005] ice_unplug_aux_dev+0x52/0x70 [ice]
[ +0.000160] ice_service_task+0x1309/0x14f0 [ice]
[ +0.000134] ? __pfx___schedule+0x10/0x10
[ +0.000006] process_one_work+0x3b1/0x6c0
[ +0.000008] worker_thread+0x69/0x670
[ +0.000005] ? __kthread_parkme+0xec/0x110
[ +0.000007] ? __pfx_worker_thread+0x10/0x10
[ +0.000005] kthread+0x17f/0x1b0
[ +0.000005] ? __pfx_kthread+0x10/0x10
[ +0.000004] ret_from_fork+0x29/0x50
[ +0.000009] </TASK>
Fixes:
940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Airlie [Sun, 5 Feb 2023 21:05:28 +0000 (07:05 +1000)]
nvidiafb: detect the hardware support before removing console.
[ Upstream commit
04119ab1a49fc41cb70f0472be5455af268fa260 ]
This driver removed the console, but hasn't yet decided if it could
take over the console yet. Instead of doing that, probe the hw for
support and then remove the console afterwards.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216859
Fixes:
145eed48de27 ("fbdev: Remove conflicting devices on PCI bus")
Reported-by: Zeno Davatz <zdavatz@gmail.com>
Tested-by: Zeno Davatz <zdavatz@gmail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205210751.3842103-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Will Deacon [Tue, 31 Jan 2023 22:17:19 +0000 (22:17 +0000)]
cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task
[ Upstream commit
7a2127e66a00e073db8d90f9aac308f4a8a64226 ]
set_cpus_allowed_ptr() will fail with -EINVAL if the requested
affinity mask is not a subset of the task_cpu_possible_mask() for the
task being updated. Consequently, on a heterogeneous system with cpusets
spanning the different CPU types, updates to the cgroup hierarchy can
silently fail to update task affinities when the effective affinity
mask for the cpuset is expanded.
For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are
the only cores capable of executing 32-bit tasks. Attaching a 32-bit
task to a cpuset containing CPUs 0-2 will correctly affine the task to
CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend
the affinity mask of the 32-bit task because update_tasks_cpumask() will
pass the full 0-3 mask to set_cpus_allowed_ptr().
Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater
and use it to mask the 'effective_cpus' mask with the possible mask for
each task being updated.
Fixes:
431c69fac05b ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Neph [Fri, 3 Feb 2023 23:33:44 +0000 (15:33 -0800)]
drm/virtio: exbuf->fence_fd unmodified on interrupted wait
[ Upstream commit
8f20660f053cefd4693e69cfff9cf58f4f7c4929 ]
An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned
to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to
retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1,
making the retry attempt fail at sync_file_get_fence().
The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the
passed value for exbuf->fence_fd when returning anything besides a
successful result from the ioctl.
Fixes:
2cd7b6f08bc4 ("drm/virtio: add in/out fence support for explicit synchronization")
Signed-off-by: Ryan Neph <ryanneph@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203233345.2477767-1-ryanneph@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Tue, 31 Jan 2023 00:21:24 +0000 (02:21 +0200)]
drm/i915: Don't do the WM0->WM1 copy w/a if WM1 is already enabled
[ Upstream commit
90d5e8301ac24550be80d193aa5582cab56c29fc ]
Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.
However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).
Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.
Fixes:
a301cb0fca2d ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit
c580c2d27ac8754cc6f01da1d715b7272f5f9cbb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Fri, 3 Feb 2023 22:08:49 +0000 (16:08 -0600)]
HID: amd_sfh: if no sensors are enabled, clean up
[ Upstream commit
7bcfdab3f0c6672ca52be3cb65a0550d8b99554b ]
It was reported that commit
b300667b33b2 ("HID: amd_sfh: Disable the
interrupt for all command") had caused increased resume time on HP Envy
x360.
Before this commit 3 sensors were reported, but they were not actually
functional. After this commit the sensors are no longer reported, but
also the resume time increased.
To avoid this problem explicitly look for the number of disabled sensors.
If all the sensors are disabled, clean everything up.
Fixes:
b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230203220850.13924-1-mario.limonciello@amd.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Casper Andersson [Fri, 3 Feb 2023 08:55:57 +0000 (09:55 +0100)]
net: microchip: sparx5: fix PTP init/deinit not checking all ports
[ Upstream commit
d7d94b2612f5dc25d61dc7bf58aafe7b31f40191 ]
Check all ports instead of just port_count ports. PTP init was only
checking ports 0 to port_count. If the hardware ports are not mapped
starting from 0 then they would be missed, e.g. if only ports 20-30 were
mapped it would attempt to init ports 0-10, resulting in NULL pointers
when attempting to timestamp. Now it will init all mapped ports.
Fixes:
70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herton R. Krzesinski [Fri, 3 Feb 2023 16:04:48 +0000 (13:04 -0300)]
uapi: add missing ip/ipv6 header dependencies for linux/stddef.h
[ Upstream commit
03702d4d29be4e2510ec80b248dbbde4e57030d9 ]
Since commit
58e0be1ef6118 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:
$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
103 | __struct_group(/* no tag */, addrs, /* no attrs */,
| ^~~~~~~~~~~~~~
...
Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.
Fixes:
58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Thu, 2 Feb 2023 22:00:23 +0000 (14:00 -0800)]
cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
[ Upstream commit
51be2fffd65d9f9cb427030ab0ee85d791b4437d ]
On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:
cpuinfo_cur_freq:2995200
cpuinfo_max_freq:1804800
scaling_available_frequencies:300000 576000 ... 1708800 1804800
scaling_cur_freq:1804800
scaling_max_freq:1804800
As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit
c72cf0cb1d77 ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.
Let's go back to the old code in the case where LMH isn't used.
Fixes:
c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allen Hubbe [Thu, 2 Feb 2023 21:55:37 +0000 (13:55 -0800)]
ionic: missed doorbell workaround
[ Upstream commit
b69585bfceceeffda940906cabfdaee4b47bde92 ]
In one version of the HW there is a remote possibility that it
will miss the doorbell ring. This adds a bit of protection to
be sure we don't stall a queue from a missed doorbell.
Fixes:
0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neel Patel [Wed, 26 Oct 2022 14:37:44 +0000 (07:37 -0700)]
ionic: refactor use of ionic_rx_fill()
[ Upstream commit
e55f0f5befc26e2ba6bb8c1f945ea8e37ee0e334 ]
The same pre-work code is used before each call to
ionic_rx_fill(), so bring it in and make it a part of
the routine.
Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of:
b69585bfcece ("ionic: missed doorbell workaround")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neel Patel [Thu, 2 Feb 2023 21:55:35 +0000 (13:55 -0800)]
ionic: clean interrupt before enabling queue to avoid credit race
[ Upstream commit
e8797a058466b60fc5a3291b92430c93ba90eaff ]
Clear the interrupt credits before enabling the queue rather
than after to be sure that the enabled queue starts at 0 and
that we don't wipe away possible credits after enabling the
queue.
Fixes:
0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Neel Patel <neel.patel@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Thu, 2 Feb 2023 20:45:36 +0000 (21:45 +0100)]
net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY
[ Upstream commit
69ff53e4a4c9498eeed7d1441f68a1481dc69251 ]
Jerome provided the information that also the GXL internal PHY doesn't
support MMD register access and EEE. MMD reads return 0xffff, what
results in e.g. completely wrong ethtool --show-eee output.
Therefore use the MMD dummy stubs.
Fixes:
d853d145ea3e ("net: phy: add an option to disable EEE advertisement")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Radhey Shyam Pandey [Thu, 2 Feb 2023 12:26:19 +0000 (17:56 +0530)]
net: macb: Perform zynqmp dynamic configuration only for SGMII interface
[ Upstream commit
c9011b028e956c3b6baa6f131d9eec43e4e52020 ]
In zynqmp platforms where firmware supports dynamic SGMII configuration
but has other non-SGMII ethernet devices, it fails them with no packets
received at the RX interface.
To fix this behaviour perform SGMII dynamic configuration only
for the SGMII phy interface.
Fixes:
32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reported-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qi Zheng [Thu, 2 Feb 2023 09:32:55 +0000 (17:32 +0800)]
bonding: fix error checking in bond_debug_reregister()
[ Upstream commit
cbe83191d40d8925b7a99969d037d2a0caf69294 ]
Since commit
ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.
Fixes:
ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Tue, 31 Jan 2023 10:02:42 +0000 (11:02 +0100)]
net: phylink: move phy_device_free() to correctly release phy device
[ Upstream commit
ce93fdb5f2ca5c9e2a9668411cc39091507f8dc9 ]
After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.
Fixes:
25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Suchanek [Wed, 1 Feb 2023 16:22:47 +0000 (10:22 -0600)]
of: Make OF framebuffer device names unique
[ Upstream commit
241d2fb56a18473af5f2ff0d512992a996eb64dd ]
Since Linux 5.19 this error is observed:
sysfs: cannot create duplicate filename '/devices/platform/of-display'
This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.
Also, fix a node refcounting issue when exiting the boot display loop.
cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
Fixes:
52b1b46c39ae ("of: Create platform devices for OF framebuffers")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Hopps [Thu, 26 Jan 2023 16:33:50 +0000 (11:33 -0500)]
xfrm: fix bug with DSCP copy to v6 from v4 tunnel
[ Upstream commit
6028da3f125fec34425dbd5fec18e85d372b2af6 ]
When copying the DSCP bits for decap-dscp into IPv6 don't assume the
outer encap is always IPv6. Instead, as with the inner IPv4 case, copy
the DSCP bits from the correctly saved "tos" value in the control block.
Fixes:
227620e29509 ("[IPSEC]: Separate inner/outer mode processing on input")
Signed-off-by: Christian Hopps <chopps@chopps.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sun, 29 Jan 2023 09:37:57 +0000 (17:37 +0800)]
RDMA/usnic: use iommu_map_atomic() under spin_lock()
[ Upstream commit
b7e08a5a63a11627601915473c3b569c1f6c6c06 ]
usnic_uiom_map_sorted_intervals() is called under spin_lock(), iommu_map()
might sleep, use iommu_map_atomic() to avoid potential sleep in atomic
context.
Fixes:
e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230129093757.637354-1-yangyingliang@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nikita Zhandarovich [Thu, 26 Jan 2023 18:52:30 +0000 (10:52 -0800)]
RDMA/irdma: Fix potential NULL-ptr-dereference
[ Upstream commit
5d9745cead1f121974322b94ceadfb4d1e67960e ]
in_dev_get() can return NULL which will cause a failure once idev is
dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a
check for NULL value in idev beforehand.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230126185230.62464-1-n.zhandarovich@fintech.ru
Reviewed-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 26 Jan 2023 11:21:30 +0000 (11:21 +0000)]
xfrm: annotate data-race around use_time
[ Upstream commit
0a9e5794b21e2d1303759ff8fe5f9215db7757ba ]
KCSAN reported multiple cpus can update use_time
at the same time.
Adds READ_ONCE()/WRITE_ONCE() annotations.
Note that 32bit arches are not fully protected,
but they will probably no longer be supported/used in 2106.
BUG: KCSAN: data-race in __xfrm_policy_check / __xfrm_policy_check
write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 0:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 1:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0000000063c62d6f -> 0x0000000063c62d70
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4185 Comm: kworker/1:2 Tainted: G W 6.2.0-rc4-syzkaller-00009-gd532dd102151-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tatulea [Tue, 24 Jan 2023 18:24:18 +0000 (20:24 +0200)]
IB/IPoIB: Fix legacy IPoIB due to wrong number of queues
[ Upstream commit
e632291a2dbce45a24cddeb5fe28fe71d724ba43 ]
The cited commit creates child PKEY interfaces over netlink will
multiple tx and rx queues, but some devices doesn't support more than 1
tx and 1 rx queues. This causes to a crash when traffic is sent over the
PKEY interface due to the parent having a single queue but the child
having multiple queues.
This patch fixes the number of queues to 1 for legacy IPoIB at the
earliest possible point in time.
BUG: kernel NULL pointer dereference, address:
000000000000036b
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0xcb/0x450
Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a
01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b
RSP: 0018:
ffff88822acbbab8 EFLAGS:
00010202
RAX:
0000000000000070 RBX:
ffff8881c28e3e00 RCX:
00000000064f8dae
RDX:
00000000064f8dad RSI:
0000000000000a20 RDI:
0000000000030d00
RBP:
0000000000000a20 R08:
ffff8882f5d30d00 R09:
ffff888104032f40
R10:
ffff88810fade828 R11:
736f6d6570736575 R12:
ffff88810081c000
R13:
00000000000002fb R14:
ffffffff817fc865 R15:
0000000000000000
FS:
00007f9324ff9700(0000) GS:
ffff8882f5d00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000000036b CR3:
00000001125af004 CR4:
0000000000370ea0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
skb_clone+0x55/0xd0
ip6_finish_output2+0x3fe/0x690
ip6_finish_output+0xfa/0x310
ip6_send_skb+0x1e/0x60
udp_v6_send_skb+0x1e5/0x420
udpv6_sendmsg+0xb3c/0xe60
? ip_mc_finish_output+0x180/0x180
? __switch_to_asm+0x3a/0x60
? __switch_to_asm+0x34/0x60
sock_sendmsg+0x33/0x40
__sys_sendto+0x103/0x160
? _copy_to_user+0x21/0x30
? kvm_clock_get_cycles+0xd/0x10
? ktime_get_ts64+0x49/0xe0
__x64_sys_sendto+0x25/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f9374f1ed14
Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b
7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b
RSP: 002b:
00007f9324ff7bd0 EFLAGS:
00000293 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00007f9324ff7cc8 RCX:
00007f9374f1ed14
RDX:
00000000000002fb RSI:
00007f93000052f0 RDI:
0000000000000030
RBP:
0000000000000000 R08:
00007f9324ff7d40 R09:
000000000000001c
R10:
0000000000000000 R11:
0000000000000293 R12:
0000000000000000
R13:
000000012a05f200 R14:
0000000000000001 R15:
00007f9374d57bdc
</TASK>
Fixes:
dbc94a0fb817 ("IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/95eb6b74c7cf49fa46281f9d056d685c9fa11d38.1674584576.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 20 Jan 2023 13:02:49 +0000 (13:02 +0000)]
xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
[ Upstream commit
b6ee896385380aa621102e8ea402ba12db1cabff ]
int type = nla_type(nla);
if (type > XFRMA_MAX) {
return -EOPNOTSUPP;
}
@type is then used as an array index and can be used
as a Spectre v1 gadget.
if (nla_len(nla) < compat_policy[type].len) {
array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.
Fixes:
5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dean Luick [Thu, 12 Jan 2023 18:16:02 +0000 (13:16 -0500)]
IB/hfi1: Restore allocated resources on failed copyout
[ Upstream commit
6601fc0d15ffc20654e39486f9bef35567106d68 ]
Fix a resource leak if an error occurs.
Fixes:
f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167354736291.2132367.10894218740150168180.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anastasia Belova [Tue, 10 Jan 2023 09:14:50 +0000 (12:14 +0300)]
xfrm: compat: change expression for switch in xfrm_xlate64
[ Upstream commit
eb6c59b735aa6cca77cdbb59cc69d69a0d63d986 ]
Compare XFRM_MSG_NEWSPDINFO (value from netlink
configuration messages enum) with nlh_src->nlmsg_type
instead of nlh_src->nlmsg_type - XFRM_MSG_BASE.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
4e9505064f58 ("net/xfrm/compat: Copy xfrm_spdattr_type_t atributes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bastien Nocera [Fri, 3 Feb 2023 10:18:00 +0000 (11:18 +0100)]
HID: logitech: Disable hi-res scrolling on USB
commit
690eb7dec72ae52d1d710d14a451844b4d0f4f19 upstream.
On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.
If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.
Disable hi-res scrolling on those devices until we implement scroll
events through HID++.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885
Fixes:
908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devid Antonio Filoni [Fri, 25 Nov 2022 17:04:18 +0000 (18:04 +0100)]
can: j1939: do not wait 250 ms if the same addr was already claimed
commit
4ae5e1e97c44f4654516c1d41591a462ed62fa7b upstream.
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
d) No CF shall begin, or resume, transmission on the network until 250
ms after it has successfully claimed an address except when
responding to a request for address-claimed.
But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.
As stated in "4.4.2.3 - Address-claimed message":
In order to successfully claim an address, the CF sending an address
claimed message shall not receive a contending claim from another CF
for at least 250 ms.
As stated in "4.4.3.2 - NAME management (NM) message":
1) A commanding CF can
d) request that a CF with a specified NAME transmit the address-
claimed message with its current NAME.
2) A target CF shall
d) send an address-claimed message in response to a request for a
matching NAME
Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.
Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).
Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Sat, 28 Jan 2023 17:47:50 +0000 (17:47 +0000)]
of/address: Return an error when no valid dma-ranges are found
commit
f6933c01e42d2fc83b9133ed755609e4aac6eadd upstream.
Commit
7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.
This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.
Fixes:
7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiju Jose [Thu, 2 Feb 2023 18:23:09 +0000 (18:23 +0000)]
tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
commit
3e46d910d8acf94e5360126593b68bf4fee4c4a1 upstream.
poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84ff525ebe560e2baf9451ab69127e2b ("tracing/ring-buffer: Have
polling block on watermark").
This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().
This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.
As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes:
42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjorn Helgaas [Fri, 3 Feb 2023 19:57:39 +0000 (13:57 -0600)]
Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"
commit
ff209ecc376a2ea8dd106a1f594427a5d94b7dd3 upstream.
This reverts commit
5e85eba6f50dc288c22083a7e213152bcc4b8208.
Thomas Witt reported that
5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates
Control Register programming") broke suspend/resume on a Tuxedo
Infinitybook S 14 v5, which seems to use a Clevo L140CU Mainboard.
The main symptom is:
iwlwifi 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
nvme 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible
and the machine is only partially usable after resume. It can't run dmesg
and can't do a clean reboot. This happens on every suspend/resume cycle.
Revert
5e85eba6f50d until we can figure out the root cause.
Fixes:
5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates Control Register programming")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjorn Helgaas [Fri, 3 Feb 2023 19:57:29 +0000 (13:57 -0600)]
Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"
commit
a7152be79b627428c628da2a887ca4b2512a78fd upstream.
This reverts commit
4ff116d0d5fd8a025604b0802d93a2d5f4e465d1.
Tasev Nikola and Mark Enriquez reported that resume from suspend was broken
in v6.1-rc1. Tasev bisected to
a47126ec29f5 ("PCI/PTM: Cache PTM
Capability offset"), but we can't figure out how that could be related.
Mark saw the same symptoms and bisected to
4ff116d0d5fd ("PCI/ASPM: Save L1
PM Substates Capability for suspend/resume"), which does have a connection:
it restores L1 Substates configuration while ASPM L1 may be enabled:
pci_restore_state
pci_restore_aspm_l1ss_state
aspm_program_l1ss
pci_write_config_dword(PCI_L1SS_CTL1, ctl1) # L1SS restore
pci_restore_pcie_state
pcie_capability_write_word(PCI_EXP_LNKCTL, cap[i++]) # L1 restore
which is a problem because PCIe r6.0, sec 5.5.4, requires that:
If setting either or both of the enable bits for ASPM L1 PM
Substates, both ports must be configured as described in this
section while ASPM L1 is disabled.
Separately, Thomas Witt reported that
5e85eba6f50d ("PCI/ASPM: Refactor L1
PM Substates Control Register programming") broke suspend/resume, and it
depends on
4ff116d0d5fd.
Revert
4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") to fix the resume issue and enable revert of
5e85eba6f50d
to fix the issue Thomas reported.
Note that reverting
4ff116d0d5fd means L1 Substates config may be lost on
suspend/resume. As far as we know the system will use more power but will
still *work* correctly.
Fixes:
4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Reported-by: Mark Enriquez <enriquezmark36@gmail.com>
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Mark Enriquez <enriquezmark36@gmail.com>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Chi [Tue, 7 Feb 2023 08:30:09 +0000 (16:30 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
commit
6c4715aa5b0ab1c0d35780b7c552e952dbb5515d upstream.
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207083011.100189-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Binding [Mon, 6 Feb 2023 15:00:19 +0000 (15:00 +0000)]
ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41
commit
7a17e8423a133a6ac238462126d7f88faaccc681 upstream.
This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230206150019.3825120-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elvis Angelaccio [Sun, 5 Feb 2023 18:56:18 +0000 (19:56 +0100)]
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9
commit
9a6804aa1c92cd28e89e746ace44d5ba101db76c upstream.
The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the
ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref
fixup in order to enable mute/micmute LEDs.
Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook
640 G9, does not work with the 645 G9.
[ rearranged the entry in SSID order -- tiwai ]
Signed-off-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4055cb48-e228-8a13-524d-afbb7aaafebe@kde.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Pinot [Sun, 29 Jan 2023 17:13:38 +0000 (18:13 +0100)]
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360
commit
bd401fd730cbcb0717bbc5438f15084db10f9259 upstream.
Samsung Galaxy Book2 Pro 360 (13" 2022 NP930QED-KA1FR) with codec SSID
144d:ca03 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.
Cc: <stable@vger.kernel.org>
Signed-off-by: Guillaume Pinot <texitoi@texitoi.eu>
Link: https://lore.kernel.org/r/20230129171338.17249-1-texitoi@texitoi.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artemii Karasev [Tue, 7 Feb 2023 13:20:26 +0000 (18:20 +0500)]
ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
commit
6a32425f953b955b4ff82f339d01df0b713caa5d upstream.
snd_emux_xg_control() can be called with an argument 'param' greater
than size of 'control' array. It may lead to accessing 'control'
array at a wrong index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207132026.2870-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edson Juliano Drosdeck [Tue, 7 Feb 2023 18:37:20 +0000 (15:37 -0300)]
ALSA: hda/realtek: Add Positivo N14KP6-TG
commit
88d18b8896bd98e636b632f805b7e84e61458255 upstream.
Positivo N14KP6-TG (1c6c:1251)
require quirk for enabling headset-mic
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207183720.2519-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Potapenko [Tue, 24 Jan 2023 11:32:34 +0000 (12:32 +0100)]
btrfs: zlib: zero-initialize zlib workspace
commit
eadd7deca0ad8a83edb2b894d8326c78e78635d6 upstream.
KMSAN reports uses of uninitialized memory in zlib's longest_match()
called on memory originating from zlib_alloc_workspace().
This issue is known by zlib maintainers and is claimed to be harmless,
but to be on the safe side we'd better initialize the memory.
Link: https://zlib.net/zlib_faq.html#faq36
Reported-by: syzbot+14d9e7602ebdf7ec0a60@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Wed, 18 Jan 2023 21:35:13 +0000 (16:35 -0500)]
btrfs: limit device extents to the device size
commit
3c538de0f2a74d50aff7278c092f88ae59cee688 upstream.
There was a recent regression in btrfs/177 that started happening with
the size class patches ("btrfs: introduce size class to block group
allocator"). This however isn't a regression introduced by those
patches, but rather the bug was uncovered by a change in behavior in
these patches. The patches triggered more chunk allocations in the
^free-space-tree case, which uncovered a race with device shrink.
The problem is we will set the device total size to the new size, and
use this to find a hole for a device extent. However during shrink we
may have device extents allocated past this range, so we could
potentially find a hole in a range past our new shrink size. We don't
actually limit our found extent to the device size anywhere, we assume
that we will not find a hole past our device size. This isn't true with
shrink as we're relocating block groups and thus creating holes past the
device size.
Fix this by making sure we do not search past the new device size, and
if we wander into any device extents that start after our device size
simply break from the loop and use whatever hole we've already found.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Kelley [Mon, 6 Feb 2023 20:11:57 +0000 (12:11 -0800)]
hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
commit
c6aa9d3b43cd11ac13a8220368a3b0483c6751d4 upstream.
Memory allocations in the network transmit path must use GFP_ATOMIC
so they won't sleep.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/lkml/8a4d08f94d3e6fe8b6da68440eaa89a088ad84f9.camel@redhat.com/
Fixes:
846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1675714317-48577-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 9 Feb 2023 10:28:28 +0000 (11:28 +0100)]
Linux 6.1.11
Link: https://lore.kernel.org/r/20230207125634.292109991@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>