Chris Wilson [Mon, 2 Nov 2020 22:10:57 +0000 (22:10 +0000)]
drm/i915/gt: Flush xcs before tgl breadcrumbs
In a simple test case that writes to scratch and then busy-waits for the
batch to be signaled, we observe that the signal is before the write is
posted. That is bad news.
Splitting the flush + write_dword into two separate flush_dw prevents
the issue from being reproduced, we can presume the post-sync op is not
so post-sync.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/216
Testcase: igt/gem_exec_fence/parallel
Testcase: igt/i915_selftest/live/gt_timelines
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-2-chris@chris-wilson.co.uk
(cherry picked from commit
09212e81e5450743e5b06b27c4e344e4c45b630d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 2 Nov 2020 22:10:56 +0000 (22:10 +0000)]
drm/i915/gt: Expose more parameters for emitting writes into the ring
Add another lower level to emit_ggtt_write so that the GGTT nature of
the write is not hardcoded into the emitter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-1-chris@chris-wilson.co.uk
(cherry picked from commit
2739d8cfc50aafff49d599cc0a5bc855445e99a7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Imre Deak [Tue, 27 Oct 2020 16:09:28 +0000 (18:09 +0200)]
drm/i915: Fix encoder lookup during PSR atomic check
The atomic check hooks must look up the encoder to be used with a
connector from the connector's atomic state, and not assume that it's
the connector's current attached encoder. The latter one can change
under the atomic check func, or can be unset yet as in the case of MST
connectors.
This fixes
[ 7.940719] Oops: 0000 [#1] SMP NOPTI
[ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu
[ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020
[ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper]
[ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915]
[ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00
[ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.990154] RSP: 0018:
ffffb864c073fac8 EFLAGS:
00010202
[ 7.990155] RAX:
ffff8c5d55ce0000 RBX:
ffff8c5d54519000 RCX:
0000000000000000
[ 7.990155] RDX:
ffff8c5d55cb30c0 RSI:
ffff8c5d89a0c800 RDI:
ffff8c5d55fcf800
[ 7.990156] RBP:
ffffb864c073fac8 R08:
0000000000000000 R09:
ffff8c5d55d9f3a0
[ 7.990156] R10:
ffff8c5d55cb30c0 R11:
0000000000000009 R12:
ffff8c5d55fcf800
[ 7.990156] R13:
ffff8c5d55cb30c0 R14:
ffff8c5d56989cc0 R15:
ffff8c5d56989cc0
[ 7.990158] FS:
0000000000000000(0000) GS:
ffff8c5d8e480000(0000) knlGS:
0000000000000000
[ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8.052970] CR2:
0000000000000078 CR3:
0000000856500005 CR4:
0000000000760ee0
[ 8.060137] PKRU:
55555554
[ 8.062867] Call Trace:
[ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915]
[ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915]
[ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper]
[ 8.083942] intel_atomic_check+0x92/0xc50 [i915]
[ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm]
[ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm]
[ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm]
[ 8.104573] drm_atomic_commit+0x18/0x50 [drm]
[ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm]
[ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm]
[ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper]
[ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper]
[ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper]
[ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915]
[ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper]
[ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper]
[ 8.165506] process_one_work+0x1e8/0x3b0
[ 8.169561] worker_thread+0x4d/0x400
[ 8.173249] kthread+0x104/0x140
[ 8.176515] ? process_one_work+0x3b0/0x3b0
[ 8.180726] ? kthread_park+0x90/0x90
[ 8.184416] ret_from_fork+0x1f/0x40
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486
Reported-by: William Tseng <william.tseng@intel.com>
Reported-by: Cooper Chiou <cooper.chiou@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027160928.3665377-1-imre.deak@intel.com
(cherry picked from commit
00e5deb5c4f5fe367311465e720e65cfa1178792)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Thu, 22 Oct 2020 06:41:27 +0000 (07:41 +0100)]
drm/i915/gt: Use the local HWSP offset during submission
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes:
ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
(cherry picked from commit
c10f6019d0b2dc8a6a62b55459f3ada5bc4e5e1a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 19 Oct 2020 20:38:25 +0000 (21:38 +0100)]
drm/i915/gem: Flush coherency domains on first set-domain-ioctl
Avoid skipping what appears to be a no-op set-domain-ioctl if the cache
coherency state is inconsistent with our target domain. This also has
the utility of using the population of the pages to validate the backing
store.
The danger in skipping the first set-domain is leaving the cache
inconsistent and submitting stale data, or worse leaving the clean data
in the cache and not flushing it to the GPU. The impact should be small
as it requires a no-op set-domain as the very first ioctl in a
particular sequence not found in typical userspace.
Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Fixes:
754a25442705 ("drm/i915: Skip object locking around a no-op set-domain ioctl")
Testcase: igt/gem_mmap_offset/blt-coherency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019203825.10966-1-chris@chris-wilson.co.uk
(cherry picked from commit
44c2200afcd59f441b43f27829b4003397cc495d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rodrigo Vivi [Wed, 4 Nov 2020 00:12:52 +0000 (19:12 -0500)]
Merge tag 'gvt-fixes-2020-10-30' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2020-10-30
- Fix HWSP reset handling during vGPU suspend/resume (Colin)
- Apply flush workaround on APL now for possible guest hang (Colin)
- Fix vGPU context pin/unpin also for host suspend regression with
vGPU created (Colin)
- more BXT/APL mmio cmd access fixes (Colin)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030052117.GC27141@zhen-hp.sh.intel.com
Vinay Kumar Yadav [Mon, 2 Nov 2020 17:39:10 +0000 (23:09 +0530)]
chelsio/chtls: fix always leaking ctrl_skb
Correct skb refcount in alloc_ctrl_skb(), causing skb memleak
when chtls_send_abort() called with NULL skb.
it was always leaking the skb, correct it by incrementing skb
refs by one.
Fixes:
cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102173909.24826-1-vinay.yadav@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vinay Kumar Yadav [Mon, 2 Nov 2020 17:36:51 +0000 (23:06 +0530)]
chelsio/chtls: fix memory leaks caused by a race
race between user context and softirq causing memleak,
consider the call sequence scenario
chtls_setkey() //user context
chtls_peer_close()
chtls_abort_req_rss()
chtls_setkey() //user context
work request skb queued in chtls_setkey() won't be freed
because resources are already cleaned for this connection,
fix it by not queuing work request while socket is closing.
v1->v2:
- fix W=1 warning.
v2->v3:
- separate it out from another memleak fix.
Fixes:
cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102173650.24754-1-vinay.yadav@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joakim Zhang [Tue, 20 Oct 2020 18:45:27 +0000 (02:45 +0800)]
can: flexcan: flexcan_remove(): disable wakeup completely
With below sequence, we can see wakeup default is enabled after re-load module,
if it was enabled before, so we need disable wakeup in flexcan_remove().
| # cat /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| disabled
| # echo enabled > /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| # cat /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| enabled
| # rmmod flexcan
| # modprobe flexcan
| # cat /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| enabled
Fixes:
de3578c198c6 ("can: flexcan: add self wakeup support")
Fixes:
915f9666421c ("can: flexcan: add support for DT property 'wakeup-source'")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020184527.8190-1-qiangqing.zhang@nxp.com
[mkl: streamlined commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Tue, 20 Oct 2020 15:53:57 +0000 (23:53 +0800)]
can: flexcan: add ECC initialization for VF610
For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.
Fixes:
cdce844865bea ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-6-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Tue, 20 Oct 2020 15:53:56 +0000 (23:53 +0800)]
can: flexcan: add ECC initialization for LX2160A
After double check with Layerscape CAN owner (Pankaj Bansal), confirm
that LX2160A indeed supports ECC feature, so correct the feature table.
For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.
Fixes:
2c19bb43e5572 ("can: flexcan: add lx2160ar1 support")
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-5-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Tue, 20 Oct 2020 15:53:55 +0000 (23:53 +0800)]
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
After double check with Layerscape CAN owner (Pankaj Bansal), confirm that
LS1021A doesn't support ECC feature, so remove FLEXCAN_QUIRK_DISABLE_MECR
quirk.
Fixes:
99b7668c04b27 ("can: flexcan: adding platform specific details for LS1021A")
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-4-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tom Rix [Mon, 19 Oct 2020 17:24:12 +0000 (10:24 -0700)]
can: mcp251xfd: remove unneeded break
A break is not needed if it is preceded by a return.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019172412.31143-1-trix@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
kernel test robot [Mon, 19 Oct 2020 12:08:05 +0000 (20:08 +0800)]
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c:176:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes:
875347fe5756 ("can: mcp25xxfd: add regmap infrastructure")
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201019120805.GA63693@ae4257e0ab22
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 15 Oct 2020 19:16:37 +0000 (21:16 +0200)]
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
During debugging it turned out that some people have setups where the SPI
communication is more prone to CRC errors.
Increase the severity of both the transfer retry and transfer failure message
to give users feedback without the need to recompile the driver with debug
enabled.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Link: http://lore.kernel.org/r/20201019190524.1285319-15-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Tue, 13 Oct 2020 15:39:47 +0000 (17:39 +0200)]
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
Echo management is driven by PUCAN_MSG_LOOPED_BACK bit, while loopback
frames are identified with PUCAN_MSG_SELF_RECEIVE bit. Those bits are set
for each outgoing frame written to the IP core so that a copy of each one
will be placed into the rx path. Thus,
- when PUCAN_MSG_LOOPED_BACK is set then the rx frame is an echo of a
previously sent frame,
- when PUCAN_MSG_LOOPED_BACK+PUCAN_MSG_SELF_RECEIVE are set, then the rx
frame is an echo AND a loopback frame. Therefore, this frame must be
put into the socket rx path too.
This patch fixes how CAN frames are handled when these are sent while the
can interface is configured in "loopback on" mode.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Link: https://lore.kernel.org/r/20201013153947.28012-1-s.grosjean@peak-system.com
Fixes:
8ac8321e4a79 ("can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Wed, 14 Oct 2020 08:56:31 +0000 (10:56 +0200)]
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
Fabian Inostroza <fabianinostrozap@gmail.com> has discovered a potential
problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface
(only), related to the fact that a timestamp of an event may precede the
timestamp used for synchronization when both records are part of the same USB
packet. However, this case was used to detect the wrapping of the time counter.
This patch details and fixes the two identified cases where this problem can
occur.
Reported-by: Fabian Inostroza <fabianinostrozap@gmail.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com
Fixes:
bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Carpenter [Thu, 13 Aug 2020 14:06:04 +0000 (17:06 +0300)]
can: peak_usb: add range checking in decode operations
These values come from skb->data so Smatch considers them untrusted. I
believe Smatch is correct but I don't have a way to test this.
The usb_if->dev[] array has 2 elements but the index is in the 0-15
range without checks. The cfd->len can be up to 255 but the maximum
valid size is CANFD_MAX_DLEN (64) so that could lead to memory
corruption.
Fixes:
0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200813140604.GA456946@mwanda
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Navid Emamdoost [Fri, 5 Jun 2020 03:32:39 +0000 (22:32 -0500)]
can: xilinx_can: handle failure cases of pm_runtime_get_sync
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20200605033239.60664-1-navid.emamdoost@gmail.com
Fixes:
4716620d1b62 ("can: xilinx: Convert to runtime_pm")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Changzhong [Fri, 17 Jul 2020 08:04:39 +0000 (16:04 +0800)]
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
The driver forgets to call clk_disable_unprepare() in error path after
a success calling for clk_prepare_enable().
Fix it by adding a clk_disable_unprepare() in error path.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594973079-27743-1-git-send-email-zhangchangzhong@huawei.com
Fixes:
befa60113ce7 ("can: ti_hecc: add missing prepare and unprepare of the clock")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Colin Ian King [Tue, 20 Oct 2020 15:42:03 +0000 (16:42 +0100)]
can: isotp: padlen(): make const array static, makes object smaller
Don't populate the const array plen on the stack but instead it static. Makes
the object code smaller by 926 bytes.
Before:
text data bss dec hex filename
26531 1943 64 28538 6f7a net/can/isotp.o
After:
text data bss dec hex filename
25509 2039 64 27612 6bdc net/can/isotp.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 19 Oct 2020 12:02:29 +0000 (14:02 +0200)]
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
As reported by Thomas Wagner:
https://github.com/hartkopp/can-isotp/issues/34
the timeout handling for data frames is not enabled when the isotp socket is
used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled
by the isotpsniffer application which therefore became inconsistend with the
strict rx timeout rules when running the isotp protocol in the operational
mode.
This patch fixes this inconsistency by moving the return condition for the
listen-only mode behind the timeout handling code.
Reported-by: Thomas Wagner <thwa1@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/34
Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Geert Uytterhoeven [Tue, 13 Oct 2020 14:13:41 +0000 (16:13 +0200)]
can: isotp: Explain PDU in CAN_ISOTP help text
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However,
this acronym is not explained here, nor in Documentation/networking/can.rst.
Expand the acronym to make it easier for users to decide if they need to enable
the CAN_ISOTP option or not.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Changzhong [Mon, 7 Sep 2020 06:31:48 +0000 (14:31 +0800)]
can: j1939: j1939_sk_bind(): return failure if netdev is down
When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.
But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.
To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120
1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever
This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Mon, 26 Oct 2020 09:44:42 +0000 (10:44 +0100)]
can: j1939: use backquotes for code samples
This patch adds backquotes for code samples.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201026094442.16587-1-yegorslists@googlemail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Thu, 22 Oct 2020 08:37:08 +0000 (10:37 +0200)]
can: j1939: swap addr and pgn in the send example
The address was wrongly assigned to the PGN field and vice versa.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201022083708.8755-1-yegorslists@googlemail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Tue, 20 Oct 2020 10:10:43 +0000 (12:10 +0200)]
can: j1939: fix syntax and spelling
This patches fixes the syntax an spelling of the j1939 documentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201020101043.6369-1-yegorslists@googlemail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Tue, 20 Oct 2020 08:11:34 +0000 (10:11 +0200)]
can: j1939: rename jacd tool
Due to naming conflicts, jacd was renamed to j1939acd in:
https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201020081134.3597-1-yegorslists@googlemail.com
Link: https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Wed, 18 Dec 2019 08:39:02 +0000 (09:39 +0100)]
can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
All user space generated SKBs are owned by a socket (unless injected into the
key via AF_PACKET). If a socket is closed, all associated skbs will be cleaned
up.
This leads to a problem when a CAN driver calls can_put_echo_skb() on a
unshared SKB. If the socket is closed prior to the TX complete handler,
can_get_echo_skb() and the subsequent delivering of the echo SKB to all
registered callbacks, a SKB with a refcount of 0 is delivered.
To avoid the problem, in can_get_echo_skb() the original SKB is now always
cloned, regardless of shared SKB or not. If the process exists it can now
safely discard its SKBs, without disturbing the delivery of the echo SKB.
The problem shows up in the j1939 stack, when it clones the incoming skb, which
detects the already 0 refcount.
We can easily reproduce this with following example:
testj1939 -B -r can0: &
cansend can0
1823ff40#0123
WARNING: CPU: 0 PID: 293 at lib/refcount.c:25 refcount_warn_saturate+0x108/0x174
refcount_t: addition on 0; use-after-free.
Modules linked in: coda_vpu imx_vdoa videobuf2_vmalloc dw_hdmi_ahb_audio vcan
CPU: 0 PID: 293 Comm: cansend Not tainted 5.5.0-rc6-00376-g9e20dcb7040d #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<
c010f570>] (dump_backtrace) from [<
c010f90c>] (show_stack+0x20/0x24)
[<
c010f8ec>] (show_stack) from [<
c0c3e1a4>] (dump_stack+0x8c/0xa0)
[<
c0c3e118>] (dump_stack) from [<
c0127fec>] (__warn+0xe0/0x108)
[<
c0127f0c>] (__warn) from [<
c01283c8>] (warn_slowpath_fmt+0xa8/0xcc)
[<
c0128324>] (warn_slowpath_fmt) from [<
c0539c0c>] (refcount_warn_saturate+0x108/0x174)
[<
c0539b04>] (refcount_warn_saturate) from [<
c0ad2cac>] (j1939_can_recv+0x20c/0x210)
[<
c0ad2aa0>] (j1939_can_recv) from [<
c0ac9dc8>] (can_rcv_filter+0xb4/0x268)
[<
c0ac9d14>] (can_rcv_filter) from [<
c0aca2cc>] (can_receive+0xb0/0xe4)
[<
c0aca21c>] (can_receive) from [<
c0aca348>] (can_rcv+0x48/0x98)
[<
c0aca300>] (can_rcv) from [<
c09b1fdc>] (__netif_receive_skb_one_core+0x64/0x88)
[<
c09b1f78>] (__netif_receive_skb_one_core) from [<
c09b2070>] (__netif_receive_skb+0x38/0x94)
[<
c09b2038>] (__netif_receive_skb) from [<
c09b2130>] (netif_receive_skb_internal+0x64/0xf8)
[<
c09b20cc>] (netif_receive_skb_internal) from [<
c09b21f8>] (netif_receive_skb+0x34/0x19c)
[<
c09b21c4>] (netif_receive_skb) from [<
c0791278>] (can_rx_offload_napi_poll+0x58/0xb4)
Fixes:
0ae89beb283a ("can: add destructor for self generated skbs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: http://lore.kernel.org/r/20200124132656.22156-1-o.rempel@pengutronix.de
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Tue, 20 Oct 2020 06:44:43 +0000 (08:44 +0200)]
can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames
The can_get_echo_skb() function returns the number of received bytes to
be used for netdev statistics. In the case of RTR frames we get a valid
(potential non-zero) data length value which has to be passed for further
operations. But on the wire RTR frames have no payload length. Therefore
the value to be used in the statistics has to be zero for RTR frames.
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201020064443.80164-1-socketcan@hartkopp.net
Fixes:
cf5046b309b3 ("can: dev: let can_get_echo_skb() return dlc of CAN frame")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Tue, 3 Nov 2020 21:28:50 +0000 (13:28 -0800)]
Merge tag 'perf-tools-for-v5.10-2020-11-03' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Only fixes and a sync of the headers so that the perf build is silent:
- Fix visibility attribute in python module init code with newer gcc
- Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event
files
- Fix the build on new fedora by removing LTO compiler options when
building perl support
- Remove broken __no_tail_call attribute
- Fix segfault when trying to trace events by cgroup
- Fix crash with non-jited BPF progs
- Increase buffer size in TUI browser, fixing format truncation
- Fix printing of build-id for objects lacking one
- Fix byte swapping for ino_generation field in MMAP2 perf.data
records
- Fix byte swapping for CGROUP perf.data records, for cross arch
analysis of perf.data files
- Fix the fast path of feature detection
- Update kernel header copies"
* tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools feature: Fixup fast path feature detection
perf tools: Add missing swap for cgroup events
perf tools: Add missing swap for ino_generation
perf tools: Initialize output buffer in build_id__sprintf
perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
tools include UAPI: Update linux/mount.h copy
tools headers UAPI: Update tools's copy of linux/perf_event.h
tools kvm headers: Update KVM headers from the kernel sources
tools UAPI: Update copy of linux/mman.h from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools x86 headers: Update required-features.h header from the kernel
tools x86 headers: Update cpufeatures.h headers copies
tools headers UAPI: Update fscrypt.h copy
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync prctl.h with the kernel sources
perf scripting python: Avoid declaring function pointers with a visibility attribute
perf tools: Remove broken __no_tail_call attribute
perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
perf trace: Fix segfault when trying to trace events by cgroup
perf tools: Fix crash with non-jited bpf progs
...
Vincent Mailhol [Fri, 2 Oct 2020 15:41:45 +0000 (00:41 +0900)]
can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context
If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but
not always, the case), the 'WARN_ON(in_irq)' in
net/core/skbuff.c#skb_release_head_state() might be triggered, under network
congestion circumstances, together with the potential risk of a NULL pointer
dereference.
The root cause of this issue is the call to kfree_skb() instead of
dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog().
This patch prevents the skb to be freed within the call to netif_rx() by
incrementing its reference count with skb_get(). The skb is finally freed by
one of the in-irq-context safe functions: dev_consume_skb_any() or
dev_kfree_skb_any(). The "any" version is used because some drivers might call
can_get_echo_skb() in a normal context.
The reason for this issue to occur is that initially, in the core network
stack, loopback skb were not supposed to be received in hardware IRQ context.
The CAN stack is an exeption.
This bug was previously reported back in 2017 in [1] but the proposed patch
never got accepted.
While [1] directly modifies net/core/dev.c, we try to propose here a
smoother modification local to CAN network stack (the assumption
behind is that only CAN devices are affected by this issue).
[1] http://lore.kernel.org/r/
57a3ffb6-3309-3ad5-5a34-
e93c3fe3614d@cetitec.com
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20201002154219.4887-2-mailhol.vincent@wanadoo.fr
Fixes:
39549eef3587 ("can: CAN Network device driver and Netlink interface")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 18 Jun 2020 10:47:06 +0000 (12:47 +0200)]
can: rx-offload: don't call kfree_skb() from IRQ context
A CAN driver, using the rx-offload infrastructure, is reading CAN frames
(usually in IRQ context) from the hardware and placing it into the rx-offload
queue to be delivered to the networking stack via NAPI.
In case the rx-offload queue is full, trying to add more skbs results in the
skbs being dropped using kfree_skb(). If done from hard-IRQ context this
results in the following warning:
[ 682.552693] ------------[ cut here ]------------
[ 682.557360] WARNING: CPU: 0 PID: 3057 at net/core/skbuff.c:650 skb_release_head_state+0x74/0x84
[ 682.566075] Modules linked in: can_raw can coda_vpu flexcan dw_hdmi_ahb_audio v4l2_jpeg imx_vdoa can_dev
[ 682.575597] CPU: 0 PID: 3057 Comm: cansend Tainted: G W 5.7.0+ #18
[ 682.583098] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 682.589657] [<
c0112628>] (unwind_backtrace) from [<
c010c1c4>] (show_stack+0x10/0x14)
[ 682.597423] [<
c010c1c4>] (show_stack) from [<
c06c481c>] (dump_stack+0xe0/0x114)
[ 682.604759] [<
c06c481c>] (dump_stack) from [<
c0128f10>] (__warn+0xc0/0x10c)
[ 682.611742] [<
c0128f10>] (__warn) from [<
c0129314>] (warn_slowpath_fmt+0x5c/0xc0)
[ 682.619248] [<
c0129314>] (warn_slowpath_fmt) from [<
c0b95dec>] (skb_release_head_state+0x74/0x84)
[ 682.628143] [<
c0b95dec>] (skb_release_head_state) from [<
c0b95e08>] (skb_release_all+0xc/0x24)
[ 682.636774] [<
c0b95e08>] (skb_release_all) from [<
c0b95eac>] (kfree_skb+0x74/0x1c8)
[ 682.644479] [<
c0b95eac>] (kfree_skb) from [<
bf001d1c>] (can_rx_offload_queue_sorted+0xe0/0xe8 [can_dev])
[ 682.654051] [<
bf001d1c>] (can_rx_offload_queue_sorted [can_dev]) from [<
bf001d6c>] (can_rx_offload_get_echo_skb+0x48/0x94 [can_dev])
[ 682.666007] [<
bf001d6c>] (can_rx_offload_get_echo_skb [can_dev]) from [<
bf01efe4>] (flexcan_irq+0x194/0x5dc [flexcan])
[ 682.676734] [<
bf01efe4>] (flexcan_irq [flexcan]) from [<
c019c1ec>] (__handle_irq_event_percpu+0x4c/0x3ec)
[ 682.686322] [<
c019c1ec>] (__handle_irq_event_percpu) from [<
c019c5b8>] (handle_irq_event_percpu+0x2c/0x88)
[ 682.695993] [<
c019c5b8>] (handle_irq_event_percpu) from [<
c019c64c>] (handle_irq_event+0x38/0x5c)
[ 682.704887] [<
c019c64c>] (handle_irq_event) from [<
c01a1058>] (handle_fasteoi_irq+0xc8/0x180)
[ 682.713432] [<
c01a1058>] (handle_fasteoi_irq) from [<
c019b2c0>] (generic_handle_irq+0x30/0x44)
[ 682.722063] [<
c019b2c0>] (generic_handle_irq) from [<
c019b8f8>] (__handle_domain_irq+0x64/0xdc)
[ 682.730783] [<
c019b8f8>] (__handle_domain_irq) from [<
c06df4a4>] (gic_handle_irq+0x48/0x9c)
[ 682.739158] [<
c06df4a4>] (gic_handle_irq) from [<
c0100b30>] (__irq_svc+0x70/0x98)
[ 682.746656] Exception stack(0xe80e9dd8 to 0xe80e9e20)
[ 682.751725] 9dc0:
00000001 e80e8000
[ 682.759922] 9de0:
e820cf80 00000000 ffffe000 00000000 eaf08fe4 00000000 600d0013 00000000
[ 682.768117] 9e00:
c1732e3c c16093a8 e820d4c0 e80e9e28 c018a57c c018b870 600d0013 ffffffff
[ 682.776315] [<
c0100b30>] (__irq_svc) from [<
c018b870>] (lock_acquire+0x108/0x4e8)
[ 682.783821] [<
c018b870>] (lock_acquire) from [<
c0e938e4>] (down_write+0x48/0xa8)
[ 682.791242] [<
c0e938e4>] (down_write) from [<
c02818dc>] (unlink_file_vma+0x24/0x40)
[ 682.798922] [<
c02818dc>] (unlink_file_vma) from [<
c027a258>] (free_pgtables+0x34/0xb8)
[ 682.806858] [<
c027a258>] (free_pgtables) from [<
c02835a4>] (exit_mmap+0xe4/0x170)
[ 682.814361] [<
c02835a4>] (exit_mmap) from [<
c01248e0>] (mmput+0x5c/0x110)
[ 682.821171] [<
c01248e0>] (mmput) from [<
c012e910>] (do_exit+0x374/0xbe4)
[ 682.827892] [<
c012e910>] (do_exit) from [<
c0130888>] (do_group_exit+0x38/0xb4)
[ 682.835132] [<
c0130888>] (do_group_exit) from [<
c0130914>] (__wake_up_parent+0x0/0x14)
[ 682.843063] irq event stamp: 1936
[ 682.846399] hardirqs last enabled at (1935): [<
c02938b0>] rmqueue+0xf4/0xc64
[ 682.853553] hardirqs last disabled at (1936): [<
c0100b20>] __irq_svc+0x60/0x98
[ 682.860799] softirqs last enabled at (1878): [<
bf04cdcc>] raw_release+0x108/0x1f0 [can_raw]
[ 682.869256] softirqs last disabled at (1876): [<
c0b8f478>] release_sock+0x18/0x98
[ 682.876753] ---[ end trace
7bca4751ce44c444 ]---
This patch fixes the problem by replacing the kfree_skb() by
dev_kfree_skb_any(), as rx-offload might be called from threaded IRQ handlers
as well.
Fixes:
ca913f1ac024 ("can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak")
Fixes:
6caf8a6d6586 ("can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb mem leak")
Link: http://lore.kernel.org/r/20201019190524.1285319-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Changzhong [Tue, 14 Jul 2020 06:44:50 +0000 (14:44 +0800)]
can: proc: can_remove_proc(): silence remove_proc_entry warning
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc()
will trigger a warning:
WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0
Kernel panic - not syncing: panic_on_warn set ...
Fix to return early from can_remove_proc() if can proc_dir does not exists.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com
Fixes:
8e8cda6d737d ("can: initial support for network namespaces")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Thu, 22 Oct 2020 07:52:18 +0000 (09:52 +0200)]
dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml
In order to automate the verification of DT nodes convert
fsl-flexcan.txt to fsl,flexcan.yaml
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201022075218.11880-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Thu, 22 Oct 2020 07:52:17 +0000 (09:52 +0200)]
dt-bindings: can: add can-controller.yaml
For now we have only node name as common rule for all CAN controllers
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201022075218.11880-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Daniele Palmas [Mon, 2 Nov 2020 11:01:08 +0000 (12:01 +0100)]
net: usb: qmi_wwan: add Telit LE910Cx 0x1230 composition
Add support for Telit LE910Cx 0x1230 composition:
0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 3 Nov 2020 21:14:14 +0000 (13:14 -0800)]
Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
Qii Wang [Fri, 30 Oct 2020 11:58:01 +0000 (19:58 +0800)]
i2c: mediatek: move dma reset before i2c reset
The i2c driver default do dma reset after i2c reset, but sometimes
i2c reset will trigger dma tx2rx, then apdma write data to dram
which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset
before i2c reset in mtk_i2c_init_hw to fix it.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Davide Caratti [Mon, 2 Nov 2020 09:09:49 +0000 (10:09 +0100)]
mptcp: token: fix unititialized variable
gcc complains about use of uninitialized 'num'. Fix it by doing the first
assignment of 'num' when the variable is declared.
Fixes:
96d890daad05 ("mptcp: add msk interations helper")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/49e20da5d467a73414d4294a8bd35e2cb1befd49.1604308087.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fred Gao [Mon, 2 Nov 2020 18:01:20 +0000 (02:01 +0800)]
vfio/pci: Bypass IGD init in case of -ENODEV
Bypass the IGD initialization when -ENODEV returns,
that should be the case if opregion is not available for IGD
or within discrete graphics device's option ROM,
or host/lpc bridge is not found.
Then use of -ENODEV here means no special device resources found
which needs special care for VFIO, but we still allow other normal
device resource access.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Fred Gao <fred.gao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Zhang Qilong [Sat, 31 Oct 2020 03:03:53 +0000 (11:03 +0800)]
vfio: platform: fix reference leak in vfio_platform_open
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put will result in
reference leak in vfio_platform_open, so we should fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Mon, 2 Nov 2020 22:02:00 +0000 (15:02 -0700)]
vfio/pci: Implement ioeventfd thread handler for contended memory lock
The ioeventfd is called under spinlock with interrupts disabled,
therefore if the memory lock is contended defer code that might
sleep to a thread context.
Fixes:
bc93b9ae0151 ("vfio-pci: Avoid recursive read-lock usage")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209253#c1
Reported-by: Ian Pilcher <arequipeno@gmail.com>
Tested-by: Ian Pilcher <arequipeno@gmail.com>
Tested-by: Justin Gatzen <justin.gatzen@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Diana Craciun [Mon, 26 Oct 2020 16:53:36 +0000 (18:53 +0200)]
vfio/fsl-mc: Make vfio_fsl_mc_irqs_allocate static
Fixed compiler warning:
drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:5: warning: no previous
prototype for function 'vfio_fsl_mc_irqs_allocate' [-Wmissing-prototypes]
^
drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:1: note: declare 'static'
if the function is not intended to be used outside of this translation unit
int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Dan Carpenter [Fri, 23 Oct 2020 11:29:47 +0000 (14:29 +0300)]
vfio/fsl-mc: prevent underflow in vfio_fsl_mc_mmap()
My static analsysis tool complains that the "index" can be negative.
There are some checks in do_mmap() which try to prevent underflows but
I don't know if they are sufficient for this situation. Either way,
making "index" unsigned is harmless so let's do it just to be safe.
Fixes:
67247289688d ("vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Linus Torvalds [Tue, 3 Nov 2020 17:57:30 +0000 (09:57 -0800)]
Merge tag 'docs-5.10-3' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A small number of fixes, plus a build tweak to respect the desire for
silence in V=0 builds"
* tag 'docs-5.10-3' of git://git.lwn.net/linux:
docs: fix automarkup regression on Python 2
documentation: arm: sunxi: add Allwinner H6 documents
scripts: kernel-doc: split typedef complex regex
scripts: kernel-doc: fix typedef parsing
docs: Makefile: honor V=0 for docs building
Linus Torvalds [Tue, 3 Nov 2020 17:55:09 +0000 (09:55 -0800)]
Merge tag 'x86_seves_for_v5.10_rc3' of git://git./linux/kernel/git/tip/tip
Pull x86 SEV-ES fixes from Borislav Petkov:
"A couple of changes to the SEV-ES code to perform more stringent
hypervisor checks before enabling encryption (Joerg Roedel)"
* tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Do not support MMIO to/from encrypted memory
x86/head/64: Check SEV encryption before switching to kernel page-table
x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path
x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler
x86/boot/compressed/64: Introduce sev_status
David Howells [Tue, 3 Nov 2020 16:33:07 +0000 (16:33 +0000)]
afs: Fix incorrect freeing of the ACL passed to the YFS ACL store op
The cleanup for the yfs_store_opaque_acl2_operation calls the wrong
function to destroy the ACL content buffer. It's an afs_acl struct, not
a yfs_acl struct - and the free function for latter may pass invalid
pointers to kfree().
Fix this by using the afs_acl_put() function. The yfs_acl_put()
function is then no longer used and can be removed.
general protection fault, probably for non-canonical address 0x7ebde00000000: 0000 [#1] SMP PTI
...
RIP: 0010:compound_head+0x0/0x11
...
Call Trace:
virt_to_cache+0x8/0x51
kfree+0x5d/0x79
yfs_free_opaque_acl+0x16/0x29
afs_put_operation+0x60/0x114
__vfs_setxattr+0x67/0x72
__vfs_setxattr_noperm+0x66/0xe9
vfs_setxattr+0x67/0xce
setxattr+0x14e/0x184
__do_sys_fsetxattr+0x66/0x8f
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Tue, 3 Nov 2020 16:32:58 +0000 (16:32 +0000)]
afs: Fix warning due to unadvanced marshalling pointer
When using the afs.yfs.acl xattr to change an AuriStor ACL, a warning
can be generated when the request is marshalled because the buffer
pointer isn't increased after adding the last element, thereby
triggering the check at the end if the ACL wasn't empty. This just
causes something like the following warning, but doesn't stop the call
from happening successfully:
kAFS: YFS.StoreOpaqueACL2: Request buffer underflow (36<108)
Fix this simply by increasing the count prior to the check.
Fixes:
f5e4546347bc ("afs: Implement YFS ACL setting")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kailang Yang [Tue, 3 Nov 2020 07:40:35 +0000 (15:40 +0800)]
ALSA: hda/realtek - Enable headphone for ASUS TM420
ASUS TM420 had depop circuit for headphone.
It need to turn on by COEF bit.
[ fixed the missing enum definition by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3d6177d7023b4783bf2793861c577ada@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jonathan Corbet [Fri, 30 Oct 2020 15:35:39 +0000 (09:35 -0600)]
docs: fix automarkup regression on Python 2
It turns out that the Python 2 re module lacks the ASCII flag, so don't try
to use it there.
Fixes:
f66e47f98c1e ("docs: automarkup.py: Fix regexes to solve sphinx 3 warnings")
Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Niklas Schnelle [Mon, 2 Nov 2020 10:33:04 +0000 (11:33 +0100)]
s390/pci: fix hot-plug of PCI function missing bus
Under some circumstances in particular with "Reconfigure I/O Path"
a zPCI function may first appear in Standby through a PCI event with
PEC 0x0302 which initially makes it visible to the zPCI subsystem,
Only after that is it configured with a zPCI event with PEC 0x0301.
If the zbus is still missing a PCI function zero (devfn == 0) when the
PCI event 0x0301 is handled zdev->zbus->bus is still NULL and gets
dereferenced in common code.
Check for this case and enable but don't scan the zPCI function.
This matches what would happen if we immediately got the 0x0301
configuration request or the function was included in CLP List PCI.
In all cases the PCI functions with devfn != 0 will be scanned once
function 0 appears.
Fixes:
3047766bc6ec ("s390/pci: fix enabling a reserved PCI function")
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Qian Cai [Wed, 28 Oct 2020 18:27:42 +0000 (14:27 -0400)]
s390/smp: move rcu_cpu_starting() earlier
The call to rcu_cpu_starting() in smp_init_secondary() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows:
WARNING: suspicious RCU usage
-----------------------------
kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
Call Trace:
show_stack+0x158/0x1f0
dump_stack+0x1f2/0x238
__lock_acquire+0x2640/0x4dd0
lock_acquire+0x3a8/0xd08
_raw_spin_lock_irqsave+0xc0/0xf0
clockevents_register_device+0xa8/0x528
init_cpu_timer+0x33e/0x468
smp_init_secondary+0x11a/0x328
smp_start_secondary+0x82/0x88
This is avoided by moving the call to rcu_cpu_starting up near the
beginning of the smp_init_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into
lockdep before RCU has declared the CPU to be watched for readers.
Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/
Signed-off-by: Qian Cai <cai@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Harald Freudenberger [Tue, 15 Sep 2020 09:00:17 +0000 (11:00 +0200)]
s390/pkey: fix paes selftest failure with paes and pkey static build
When both the paes and the pkey kernel module are statically build
into the kernel, the paes cipher selftests run before the pkey
kernel module is initialized. So a static variable set in the pkey
init function and used in the pkey_clr2protkey function is not
initialized when the paes cipher's selftests request to call pckmo for
transforming a clear key value into a protected key.
This patch moves the initial setup of the static variable into
the function pck_clr2protkey. So it's possible, to use the function
for transforming a clear to a protected key even before the pkey
init function has been called and the paes selftests may run
successful.
Reported-by: Alexander Egorenkov <Alexander.Egorenkov@ibm.com>
Cc: <stable@vger.kernel.org> # 4.20
Fixes:
f822ad2c2c03 ("s390/pkey: move pckmo subfunction available checks away from module init")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Mon, 26 Oct 2020 18:52:04 +0000 (19:52 +0100)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Mon, 26 Oct 2020 15:15:22 +0000 (16:15 +0100)]
s390/vdso: remove unused constants
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Mon, 26 Oct 2020 15:15:22 +0000 (16:15 +0100)]
s390/vdso: remove empty unused file
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Gerald Schaefer [Tue, 20 Oct 2020 18:20:07 +0000 (20:20 +0200)]
s390/mm: make pmd/pud_deref() large page aware
pmd/pud_deref() assume that they will never operate on large pmd/pud
entries, and therefore only use the non-large _xxx_ENTRY_ORIGIN mask.
With commit
9ec8fa8dc331b ("s390/vmemmap: extend modify_pagetable()
to handle vmemmap"), that assumption is no longer true, at least for
pmd_deref().
In theory, we could end up with wrong addresses because some of the
non-address bits of a large entry would not be masked out.
In practice, this does not (yet) show any impact, because vmemmap_free()
is currently never used for s390.
Fix pmd/pud_deref() to check for the entry type and use the
_xxx_ENTRY_ORIGIN_LARGE mask for large entries.
While at it, also move pmd/pud_pfn() around, in order to avoid code
duplication, because they do the same thing.
Fixes:
9ec8fa8dc331b ("s390/vmemmap: extend modify_pagetable() to handle vmemmap")
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Harald Freudenberger [Tue, 20 Oct 2020 10:20:30 +0000 (12:20 +0200)]
s390/ap: fix ap devices reference counting
With the last rework of the AP bus scan function one get_device() is
missing causing the reference counter to be one instance too
low. Together with binding/unbinding device drivers to an ap device it
may end up in an segfault because the ap device is freed but a device
driver still assumes it's pointer to the ap device is valid:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address:
6b6b6b6b6b6b6000 TEID:
6b6b6b6b6b6b6803
Fault in home space mode while using kernel ASCE.
Krnl PSW :
0404e00180000000 000000001472f3b6 (klist_next+0x7e/0x180)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Call Trace:
[<
000000001472f3b6>] klist_next+0x7e/0x180
([<
000000001472f36a>] klist_next+0x32/0x180)
[<
00000000147c14de>] bus_for_each_dev+0x66/0xb8
[<
0000000014aab0d4>] ap_scan_adapter+0xcc/0x6c0
[<
0000000014aab74a>] ap_scan_bus+0x82/0x140
[<
0000000013f3b654>] process_one_work+0x27c/0x478
[<
0000000013f3b8b6>] worker_thread+0x66/0x368
[<
0000000013f44e32>] kthread+0x17a/0x1a0
[<
0000000014af23e4>] ret_from_fork+0x24/0x2c
Kernel panic - not syncing: Fatal exception: panic_on_oops
Fixed by adjusting the reference count with get_device() on the right
place. Also now the device drivers don't need to adjust the ap
device's reference counting any more. This is now done in the ap bus
probe and remove functions.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes:
4f2fcccdb547 ("s390/ap: add card/queue deconfig state")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Jean-Philippe Brucker [Tue, 3 Nov 2020 13:49:01 +0000 (14:49 +0100)]
arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
Commit
36dadef23fcc ("kprobes: Init kprobes in early_initcall") enabled
using kprobes from early_initcall. Unfortunately at this point the
hardware debug infrastructure is not operational. The OS lock may still
be locked, and the hardware watchpoints may have unknown values when
kprobe enables debug monitors to single-step instructions.
Rather than using hardware single-step, append a BRK instruction after
the instruction to be executed out-of-line.
Fixes:
36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20201103134900.337243-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Dan Carpenter [Tue, 3 Nov 2020 10:16:23 +0000 (13:16 +0300)]
iommu: Fix a check in iommu_check_bind_data()
The "data->flags" variable is a u64 so if one of the high 32 bits is
set the original code will allow it, but it should be rejected. The
fix is to declare "mask" as a u64 instead of a u32.
Fixes:
d90573812eea ("iommu/uapi: Handle data and argsz filled by users")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101623.GA1127762@mwanda
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Alexander Aring [Mon, 26 Oct 2020 14:52:29 +0000 (10:52 -0400)]
gfs2: Wake up when sd_glock_disposal becomes zero
Commit
fc0e38dae645 ("GFS2: Fix glock deallocation race") fixed a
sd_glock_disposal accounting bug by adding a missing atomic_dec
statement, but it failed to wake up sd_glock_wait when that decrement
causes sd_glock_disposal to reach zero. As a consequence,
gfs2_gl_hash_clear can now run into a 10-minute timeout instead of
being woken up. Add the missing wakeup.
Fixes:
fc0e38dae645 ("GFS2: Fix glock deallocation race")
Cc: stable@vger.kernel.org # v2.6.39+
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Liu, Yi L [Fri, 30 Oct 2020 02:37:24 +0000 (10:37 +0800)]
iommu/vt-d: Fix a bug for PDP check in prq_event_thread
In prq_event_thread(), the QI_PGRP_PDP is wrongly set by
'req->pasid_present' which should be replaced to
'req->priv_data_present'.
Fixes:
5b438f4ba315 ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1604025444-6954-3-git-send-email-yi.y.sun@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Liu Yi L [Fri, 30 Oct 2020 02:37:23 +0000 (10:37 +0800)]
iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid()
Should get correct sid and set it into sdev. Because we execute
'sdev->sid != req->rid' in the loop of prq_event_thread().
Fixes:
eb8d93ea3c1d ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1604025444-6954-2-git-send-email-yi.y.sun@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Wed, 28 Oct 2020 07:07:25 +0000 (15:07 +0800)]
iommu/vt-d: Fix kernel NULL pointer dereference in find_domain()
If calling find_domain() for a device which hasn't been probed by the
iommu core, below kernel NULL pointer dereference issue happens.
[ 362.736947] BUG: kernel NULL pointer dereference, address:
0000000000000038
[ 362.743953] #PF: supervisor read access in kernel mode
[ 362.749115] #PF: error_code(0x0000) - not-present page
[ 362.754278] PGD 0 P4D 0
[ 362.756843] Oops: 0000 [#1] SMP NOPTI
[ 362.760528] CPU: 0 PID: 844 Comm: cat Not tainted 5.9.0-rc4-intel-next+ #1
[ 362.767428] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake
U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3384.A02.
1909200816
09/20/2019
[ 362.781109] RIP: 0010:find_domain+0xd/0x40
[ 362.785234] Code: 48 81 fb 60 28 d9 b2 75 de 5b 41 5c 41 5d 5d c3 0f 1f 00 66
2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 87 e0 02 00
00 55 <48> 8b 40 38 48 89 e5 48 83 f8 fe 0f 94 c1 48 85 ff
0f 94 c2 08 d1
[ 362.804041] RSP: 0018:
ffffb09cc1f0bd38 EFLAGS:
00010046
[ 362.809292] RAX:
0000000000000000 RBX:
ffff905b98e4fac8 RCX:
0000000000000000
[ 362.816452] RDX:
0000000000000001 RSI:
ffff905b98e4fac8 RDI:
ffff905b9ccd40d0
[ 362.823617] RBP:
ffffb09cc1f0bda0 R08:
ffffb09cc1f0bd48 R09:
000000000000000f
[ 362.830778] R10:
ffffffffb266c080 R11:
ffff905b9042602d R12:
ffff905b98e4fac8
[ 362.837944] R13:
ffffb09cc1f0bd48 R14:
ffff905b9ccd40d0 R15:
ffff905b98e4fac8
[ 362.845108] FS:
00007f8485460740(0000) GS:
ffff905b9fc00000(0000)
knlGS:
0000000000000000
[ 362.853227] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 362.858996] CR2:
0000000000000038 CR3:
00000004627a6003 CR4:
0000000000770ef0
[ 362.866161] PKRU:
fffffffc
[ 362.868890] Call Trace:
[ 362.871363] ? show_device_domain_translation+0x32/0x100
[ 362.876700] ? bind_store+0x110/0x110
[ 362.880387] ? klist_next+0x91/0x120
[ 362.883987] ? domain_translation_struct_show+0x50/0x50
[ 362.889237] bus_for_each_dev+0x79/0xc0
[ 362.893121] domain_translation_struct_show+0x36/0x50
[ 362.898204] seq_read+0x135/0x410
[ 362.901545] ? handle_mm_fault+0xeb8/0x1750
[ 362.905755] full_proxy_read+0x5c/0x90
[ 362.909526] vfs_read+0xa6/0x190
[ 362.912782] ksys_read+0x61/0xe0
[ 362.916037] __x64_sys_read+0x1a/0x20
[ 362.919725] do_syscall_64+0x37/0x80
[ 362.923329] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 362.928405] RIP: 0033:0x7f84855c5e95
Filter out those devices to avoid such error.
Fixes:
e2726daea583d ("iommu/vt-d: debugfs: Add support to show page table internals")
Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org#v5.6+
Link: https://lore.kernel.org/r/20201028070725.24979-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Suravee Suthikulpanit [Thu, 15 Oct 2020 02:50:02 +0000 (02:50 +0000)]
iommu/amd: Increase interrupt remapping table limit to 512 entries
Certain device drivers allocate IO queues on a per-cpu basis.
On AMD EPYC platform, which can support up-to 256 cpu threads,
this can exceed the current MAX_IRQ_PER_TABLE limit of 256,
and result in the error message:
AMD-Vi: Failed to allocate IRTE
This has been observed with certain NVME devices.
AMD IOMMU hardware can actually support upto 512 interrupt
remapping table entries. Therefore, update the driver to
match the hardware limit.
Please note that this also increases the size of interrupt remapping
table to 8KB per device when using the 128-bit IRTE format.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201015025002.87997-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Michał Mirosław [Mon, 2 Nov 2020 21:27:27 +0000 (22:27 +0100)]
regulator: defer probe when trying to get voltage from unresolved supply
regulator_get_voltage_rdev() is called in regulator probe() when
applying machine constraints. The "fixed" commit exposed the problem
that non-bypassed regulators can forward the request to its parent
(like bypassed ones) supply. Return -EPROBE_DEFER when the supply
is expected but not resolved yet.
Fixes:
aea6cb99703e ("regulator: resolve supply after creating regulator")
Cc: stable@vger.kernel.org
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reported-by: Ondřej Jirman <megous@megous.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Ondřej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/a9041d68b4d35e4a2dd71629c8a6422662acb5ee.1604351936.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Dan Carpenter [Tue, 3 Nov 2020 10:18:07 +0000 (13:18 +0300)]
ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link()
This is harmless, but the "addr" comes from the user and it could lead
to a negative shift or to shift wrapping if it's too high.
Fixes:
0b00a5615dc4 ("ALSA: hdac_ext: add hdac extended controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101807.GC1127762@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnaldo Carvalho de Melo [Tue, 3 Nov 2020 12:24:20 +0000 (09:24 -0300)]
tools feature: Fixup fast path feature detection
22dd1ac91a776752 ("tools: Remove feature-libelf-mmap feature detection")
correctly simplified the this feature detection, but forgot to remove
the call to the removed function in the main() function for the
test-all.c fast path feature detection, making it fail and thus do all
the feature detection individually, fix it.
$ cat /tmp/build/perf/feature/test-all.make.output
test-all.c: In function ‘main’:
test-all.c:188:2: error: implicit declaration of function ‘main_test_libelf_mmap’; did you mean ‘main_test_libelf’? [-Werror=implicit-function-declaration]
188 | main_test_libelf_mmap();
| ^~~~~~~~~~~~~~~~~~~~~
| main_test_libelf
cc1: all warnings being treated as errors
$ vim tools/build/feature/test-all.c
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;make V=1 -k O=/tmp/build/perf -C tools/perf install-bin ; perf test python
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
$
Fixes:
22dd1ac91a776752 ("tools: Remove feature-libelf-mmap feature detection")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 2 Nov 2020 14:02:28 +0000 (23:02 +0900)]
perf tools: Add missing swap for cgroup events
It was missed to add a swap function for PERF_RECORD_CGROUP.
Fixes:
ba78c1c5461c ("perf tools: Basic support for CGROUP event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201102140228.303657-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 1 Nov 2020 23:31:03 +0000 (00:31 +0100)]
perf tools: Add missing swap for ino_generation
We are missing swap for ino_generation field.
Fixes:
5c5e854bc760 ("perf tools: Add attr->mmap2 support")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 1 Nov 2020 23:31:02 +0000 (00:31 +0100)]
perf tools: Initialize output buffer in build_id__sprintf
We display garbage for undefined build_id objects, because we don't
initialize the output buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Song Liu [Fri, 30 Oct 2020 23:54:31 +0000 (16:54 -0700)]
perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
Making perf with gcc-9.1.1 generates the following warning:
CC ui/browsers/hists.o
ui/browsers/hists.c: In function 'perf_evsel__hists_browse':
ui/browsers/hists.c:3078:61: error: '%d' directive output may be \
truncated writing between 1 and 11 bytes into a region of size \
between 2 and 12 [-Werror=format-truncation=]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~
ui/browsers/hists.c:3078:7: note: directive argument in the range [-
2147483648, 8]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:937,
from ui/browsers/hists.c:5:
IOW, the string in line 3078 might be too long for buf[] of 64 bytes.
Fix this by increasing the size of buf[] to 128.
Fixes:
dbddf1747441 ("perf report/top TUI: Support hotkeys to let user select any event for sorting")
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: stable@vger.kernel.org # v5.7+
Link: http://lore.kernel.org/lkml/20201030235431.534417-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Nov 2020 11:52:11 +0000 (08:52 -0300)]
tools include UAPI: Update linux/mount.h copy
To pick the changes from:
dab741e0e02bd3c4 ("Add a "nosymfollow" mount option.")
That ends up adding support for the new MS_NOSYMFOLLOW mount flag:
$ tools/perf/trace/beauty/mount_flags.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/mount_flags.sh > after
$ diff -u before after
--- before 2020-11-03 08:51:28.
117997454 -0300
+++ after 2020-11-03 08:51:38.
992218869 -0300
@@ -7,6 +7,7 @@
[32 ? (ilog2(32) + 1) : 0] = "REMOUNT",
[64 ? (ilog2(64) + 1) : 0] = "MANDLOCK",
[128 ? (ilog2(128) + 1) : 0] = "DIRSYNC",
+ [256 ? (ilog2(256) + 1) : 0] = "NOSYMFOLLOW",
[1024 ? (ilog2(1024) + 1) : 0] = "NOATIME",
[2048 ? (ilog2(2048) + 1) : 0] = "NODIRATIME",
[4096 ? (ilog2(4096) + 1) : 0] = "BIND",
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Nov 2020 11:49:59 +0000 (08:49 -0300)]
tools headers UAPI: Update tools's copy of linux/perf_event.h
The diff is just tabs versus spaces, trivial.
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 16:42:55 +0000 (13:42 -0300)]
tools kvm headers: Update KVM headers from the kernel sources
Some should cause changes in tooling, like the one adding LAST_EXCP, but
the way it is structured end up not making that happen.
The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c,
in the svm_exit_reasons table.
The tools/perf/trace/beauty part has scripts to catch changes and
automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh,
but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch
those automatically.
These were handled by the existing scripts:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2020-11-03 08:43:52.
910728608 -0300
+++ after 2020-11-03 08:44:04.
273959984 -0300
@@ -89,6 +89,7 @@
[0xbf] = "SET_NESTED_STATE",
[0xc0] = "CLEAR_DIRTY_LOG",
[0xc1] = "GET_SUPPORTED_HV_CPUID",
+ [0xc6] = "X86_SET_MSR_FILTER",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2020-11-03 08:45:55.
522225198 -0300
+++ after 2020-11-03 08:46:12.
881578666 -0300
@@ -37,4 +37,5 @@
[0x71] = "VDPA_GET_STATUS",
[0x73] = "VDPA_GET_CONFIG",
[0x76] = "VDPA_GET_VRING_NUM",
+ [0x78] = "VDPA_GET_IOVA_RANGE",
};
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h'
diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 16:36:41 +0000 (13:36 -0300)]
tools UAPI: Update copy of linux/mman.h from the kernel sources
e47168f3d1b14af5 ("powerpc/8xx: Support 16k hugepages with 4k pages")
That don't cause any changes in tooling, just addresses this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 16:28:04 +0000 (13:28 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
29dcc60f6a19fb0a ("x86/boot/compressed/64: Add stage1 #VC handler")
36e1be8ada994d50 ("perf/x86/amd/ibs: Fix raw sample data accumulation")
59a854e2f3b90ad2 ("perf/x86/intel: Support TopDown metrics on Ice Lake")
7b2c05a15d29d057 ("perf/x86/intel: Generic support for hardware TopDown metrics")
99e40204e014e066 ("x86/msr: Move the F15h MSRs where they belong")
b57de6cd16395be1 ("x86/sev-es: Add SEV-ES Feature Detection")
ed7bde7a6dab521e ("cpufreq: intel_pstate: Allow enable/disable energy efficiency")
f0f2f9feb4ee6f28 ("x86/msr-index: Define an IA32_PASID MSR")
That cause these changes in tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-10-19 13:27:33.
195274425 -0300
+++ after 2020-10-19 13:27:44.
144507610 -0300
@@ -113,6 +113,8 @@
[0x00000309] = "CORE_PERF_FIXED_CTR0",
[0x0000030a] = "CORE_PERF_FIXED_CTR1",
[0x0000030b] = "CORE_PERF_FIXED_CTR2",
+ [0x0000030c] = "CORE_PERF_FIXED_CTR3",
+ [0x00000329] = "PERF_METRICS",
[0x00000345] = "IA32_PERF_CAPABILITIES",
[0x0000038d] = "CORE_PERF_FIXED_CTR_CTRL",
[0x0000038e] = "CORE_PERF_GLOBAL_STATUS",
@@ -222,6 +224,7 @@
[0x00000774] = "HWP_REQUEST",
[0x00000777] = "HWP_STATUS",
[0x00000d90] = "IA32_BNDCFGS",
+ [0x00000d93] = "IA32_PASID",
[0x00000da0] = "IA32_XSS",
[0x00000dc0] = "LBR_INFO_0",
[0x00000ffc] = "IA32_BNDCFGS_RSVD",
@@ -279,6 +282,7 @@
[0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE",
[0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA",
[0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL",
+ [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB",
[0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV",
[0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH",
[0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS",
$
Which causes these parts of tools/perf/ to be rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
DESCEND plugins
GEN /tmp/build/perf/python/perf.so
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/per
At some point these should just be tables read by perf on demand.
This addresses this perf tools build warning:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 16:24:52 +0000 (13:24 -0300)]
tools x86 headers: Update required-features.h header from the kernel
To pick the changes from:
ecac71816a1829c0 ("x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT")
That don entail any changes in tooling, just addressing these perf tools
build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 16:21:04 +0000 (13:21 -0300)]
tools x86 headers: Update cpufeatures.h headers copies
To pick the changes from:
5866e9205b47a983 ("x86/cpu: Add hardware-enforced cache coherency as a CPUID feature")
ff4f82816dff28ff ("x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions")
360e7c5c4ca4fd8e ("x86/cpufeatures: Add SEV-ES CPU feature")
18ec63faefb3fd31 ("x86/cpufeatures: Enumerate TSX suspend load address tracking instructions")
e48cb1a3fb916500 ("x86/resctrl: Enumerate per-thread MBA controls")
Which don't cause any changes in tooling, just addresses these build
warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 16:12:52 +0000 (13:12 -0300)]
tools headers UAPI: Update fscrypt.h copy
To get the changes from:
c7f0207b613033c5 ("fscrypt: make "#define fscrypt_policy" user-only")
That don't cause any changes in tools/perf, only addresses this perf
tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 15:41:58 +0000 (12:41 -0300)]
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in:
13149e8bafc46572 ("drm/i915: add syncobj timeline support")
cda9edd02425d790 ("drm/i915: introduce a mechanism to extend execbuf2")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 15:38:16 +0000 (12:38 -0300)]
tools headers UAPI: Sync prctl.h with the kernel sources
To get the changes in:
1c101da8b971a366 ("arm64: mte: Allow user control of the tag check mode via prctl()")
af5ce95282dc99d0 ("arm64: mte: Allow user control of the generated random tags via prctl()")
Which don't cause any change in tooling, only addresses this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 30 Oct 2020 11:24:38 +0000 (08:24 -0300)]
perf scripting python: Avoid declaring function pointers with a visibility attribute
To avoid this:
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
That started breaking when building with PYTHON=python3 and these gcc
versions (I haven't checked with the clang ones, maybe it breaks there
as well):
# export PERF_TARBALL=http://192.168.86.5/perf/perf-5.9.0.tar.xz
# dm fedora:33 fedora:rawhide
1 107.80 fedora:33 : Ok gcc (GCC) 10.2.1
20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
2 92.47 fedora:rawhide : Ok gcc (GCC) 10.2.1
20201016 (Red Hat 10.2.1-6), clang version 11.0.0 (Fedora 11.0.0-1.fc34)
#
Avoid that by ditching that 'initfunc' function pointer with its:
#define Py_EXPORTED_SYMBOL _attribute_ ((visibility ("default")))
#define PyMODINIT_FUNC Py_EXPORTED_SYMBOL PyObject*
And just call PyImport_AppendInittab() at the end of the ifdef python3
block with the functions that were being attributed to that initfunc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter Zijlstra [Wed, 28 Oct 2020 08:11:23 +0000 (09:11 +0100)]
perf tools: Remove broken __no_tail_call attribute
The GCC specific __attribute__((optimize)) attribute does not what is
commonly expected and is explicitly recommended against using in
production code by the GCC people.
Unlike what is often expected, it doesn't add to the optimization flags,
but it fully replaces them, loosing any and all optimization flags
provided by the compiler commandline.
The only guaranteed upon means of inhibiting tail-calls is by placing a
volatile asm with side-effects after the call such that the tail-call simply
cannot be done.
Given the original commit wasn't specific on which calls were the problem, this
removal might re-introduce the problem, which can then be re-analyzed and cured
properly.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Fri, 23 Oct 2020 00:53:34 +0000 (08:53 +0800)]
perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
Ian reports an issue that the metric DRAM_BW_Use often remains 0.
The metric expression for DRAM_BW_Use on CLX/SKX:
"( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) /
1000000000 ) / duration_time"
The counts of uncore_imc/cas_count_read/ and uncore_imc/cas_count_write/
are scaled up by 64, that is to turn a count of cache lines into bytes,
the count is then divided by
1000000000 to give GB.
However, the counts of uncore_imc/cas_count_read/ and
uncore_imc/cas_count_write/ have been scaled yet.
The scale values are from sysfs, such as
/sys/devices/uncore_imc_0/events/cas_count_read.scale.
It's 6.
103515625e-5 (64 / 1024.0 / 1024.0).
So if we use original metric expression, the result is not correct.
But the difficulty is, for SKL client, the counts are not scaled.
The metric expression for DRAM_BW_Use on SKL:
"64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000"
root@kbl-ppc:~# perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
190 arb/event=0x84,umask=0x1/ # 1.86 DRAM_BW_Use
29,093,178 arb/event=0x81,umask=0x1/
1,000,703,287 ns duration_time
1.
000703287 seconds time elapsed
The result is expected.
So the easy way is just change the metric expression for CLX/SKX.
This patch changes the metric expression to:
"( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) /
1000000000 ) / duration_time"
1048576 = 1024 * 1024.
Before (tested on CLX):
root@lkp-csl-2sp5 ~# perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
765.35 MiB uncore_imc/cas_count_read/ # 0.00 DRAM_BW_Use
5.42 MiB uncore_imc/cas_count_write/
1001515088 ns duration_time
1.
001515088 seconds time elapsed
After:
root@lkp-csl-2sp5 ~# perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
767.95 MiB uncore_imc/cas_count_read/ # 0.80 DRAM_BW_Use
5.02 MiB uncore_imc/cas_count_write/
1001900010 ns duration_time
1.
001900010 seconds time elapsed
Fixes:
038d3b53c284 ("perf vendor events intel: Update CascadelakeX events to v1.08")
Fixes:
b5ff7f2799a4 ("perf vendor events: Update SkylakeX events to v1.21")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201023005334.7869-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Ivanichkin [Tue, 27 Oct 2020 09:43:57 +0000 (12:43 +0300)]
perf trace: Fix segfault when trying to trace events by cgroup
# ./perf trace -e sched:sched_switch -G test -a sleep 1
perf: Segmentation fault
Obtained 11 stack frames.
./perf(sighandler_dump_stack+0x43) [0x55cfdc636db3]
/lib/x86_64-linux-gnu/libc.so.6(+0x3efcf) [0x7fd23eecafcf]
./perf(parse_cgroups+0x36) [0x55cfdc673f36]
./perf(+0x3186ed) [0x55cfdc70d6ed]
./perf(parse_options_subcommand+0x629) [0x55cfdc70e999]
./perf(cmd_trace+0x9c2) [0x55cfdc5ad6d2]
./perf(+0x1e8ae0) [0x55cfdc5ddae0]
./perf(+0x1e8ded) [0x55cfdc5ddded]
./perf(main+0x370) [0x55cfdc556f00]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fd23eeadb96]
./perf(_start+0x29) [0x55cfdc557389]
Segmentation fault
#
It happens because "struct trace" in option->value is passed to the
parse_cgroups function instead of "struct evlist".
Fixes:
9ea42ba4411ac ("perf trace: Support setting cgroups as targets")
Signed-off-by: Stanislav Ivanichkin <sivanichkin@yandex-team.ru>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Link: http://lore.kernel.org/lkml/20201027094357.94881-1-sivanichkin@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tommi Rantala [Fri, 16 Oct 2020 11:47:18 +0000 (14:47 +0300)]
perf tools: Fix crash with non-jited bpf progs
The addr in PERF_RECORD_KSYMBOL events for non-jited bpf progs points to
the bpf interpreter, ie. within kernel text section. When processing the
unregister event, this causes unexpected removal of vmlinux_map,
crashing perf later in cleanup:
# perf record -- timeout --signal=INT 2s /usr/share/bcc/tools/execsnoop
PCOMM PID PPID RET ARGS
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.208 MB perf.data (5155 samples) ]
perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed.
Aborted (core dumped)
# perf script -D|grep KSYM
0 0xa40 [0x48]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6
0 0xab0 [0x48]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_8c42dee26e8cd4c2
0 0xb20 [0x48]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6
108563691893 0x33d98 [0x58]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b3b0 len 0 type 1 flags 0x0 name bpf_prog_bc5697a410556fc2_syscall__execve
108568518458 0x34098 [0x58]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b3f0 len 0 type 1 flags 0x0 name bpf_prog_45e2203c2928704d_do_ret_sys_execve
109301967895 0x34830 [0x58]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b3b0 len 0 type 1 flags 0x1 name bpf_prog_bc5697a410556fc2_syscall__execve
109302007356 0x348b0 [0x58]: PERF_RECORD_KSYMBOL addr
ffffffffa9b6b3f0 len 0 type 1 flags 0x1 name bpf_prog_45e2203c2928704d_do_ret_sys_execve
perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed.
Here the addresses match the bpf interpreter:
# grep -e
ffffffffa9b6b530 -e
ffffffffa9b6b3b0 -e
ffffffffa9b6b3f0 /proc/kallsyms
ffffffffa9b6b3b0 t __bpf_prog_run224
ffffffffa9b6b3f0 t __bpf_prog_run192
ffffffffa9b6b530 t __bpf_prog_run32
Fix by not allowing vmlinux_map to be removed by PERF_RECORD_KSYMBOL
unregister event.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201016114718.54332-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Nov 2020 11:29:30 +0000 (08:29 -0300)]
tools headers UAPI: Update process_madvise affected files
To pick the changes from:
ecb8ac8b1f146915 ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
That addresses these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 19 Oct 2020 15:26:45 +0000 (12:26 -0300)]
perf tools: Update copy of libbpf's hashmap.c
To pick the changes in:
85367030a6c7ef33 ("libbpf: Centralize poisoning and poison reallocarray()")
7d9c71e10baa3496 ("libbpf: Extract generic string hashing function for reuse")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Justin M. Forbes [Wed, 28 Oct 2020 16:59:00 +0000 (13:59 -0300)]
perf tools: Remove LTO compiler options when building perl support
To avoid breaking the build by mixing files compiled with things coming
from distro specific compiler options for perl with the rest of perf,
i.e. to avoid this:
`.gnu.debuglto_.debug_macro' referenced in section `.gnu.debuglto_.debug_macro' of /tmp/build/perf/util/scripting-engines/perf-in.o: defined in discarded section `.gnu.debuglto_.debug_macro[wm4.stdcpredef.h.19.
8dc41bed5d9037ff9622e015fb5f0ce3]' of /tmp/build/perf/util/scripting-engines/perf-in.o
Noticed on Fedora 33.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1593431
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://src.fedoraproject.org/rpms/kernel-tools/c/589a32b62f0c12516ab7b34e3dd30d450145bfa4?branch=master
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lee Jones [Mon, 2 Nov 2020 18:32:42 +0000 (13:32 -0500)]
Fonts: Replace discarded const qualifier
Commit
6735b4632def ("Fonts: Support FONT_EXTRA_WORDS macros for built-in
fonts") introduced the following error when building rpc_defconfig (only
this build appears to be affected):
`acorndata_8x8' referenced in section `.text' of arch/arm/boot/compressed/ll_char_wr.o:
defined in discarded section `.data' of arch/arm/boot/compressed/font.o
`acorndata_8x8' referenced in section `.data.rel.ro' of arch/arm/boot/compressed/font.o:
defined in discarded section `.data' of arch/arm/boot/compressed/font.o
make[3]: *** [/scratch/linux/arch/arm/boot/compressed/Makefile:191: arch/arm/boot/compressed/vmlinux] Error 1
make[2]: *** [/scratch/linux/arch/arm/boot/Makefile:61: arch/arm/boot/compressed/vmlinux] Error 2
make[1]: *** [/scratch/linux/arch/arm/Makefile:317: zImage] Error 2
The .data section is discarded at link time. Reinstating acorndata_8x8 as
const ensures it is still available after linking. Do the same for the
other 12 built-in fonts as well, for consistency purposes.
Cc: <stable@vger.kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes:
6735b4632def ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Co-developed-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102183242.2031659-1-yepeilin.cs@gmail.com
Vanshidhar Konda [Fri, 30 Oct 2020 17:30:50 +0000 (10:30 -0700)]
arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4
The current arm64 default config limits max NUMA nodes available on
system to 4 (NODES_SHIFT = 2). Today's arm64 systems can reach or
exceed 16 NUMA nodes. To accomodate current hardware and to fit
NODES_SHIFT within page flags on arm64, increase NODES_SHIFT to 4.
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201020173409.1266576-1-vanshikonda@os.amperecomputing.com/
Link: https://lore.kernel.org/r/20201030173050.1182876-1-vanshikonda@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Sagi Grimberg [Thu, 22 Oct 2020 02:15:31 +0000 (10:15 +0800)]
nvme-tcp: avoid repeated request completion
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_tcp_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Thu, 22 Oct 2020 02:15:23 +0000 (10:15 +0800)]
nvme-rdma: avoid repeated request completion
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_rdma_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chao Leng [Thu, 22 Oct 2020 02:15:15 +0000 (10:15 +0800)]
nvme-tcp: avoid race between time out and tear down
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chao Leng [Thu, 22 Oct 2020 02:15:08 +0000 (10:15 +0800)]
nvme-rdma: avoid race between time out and tear down
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chao Leng [Thu, 22 Oct 2020 02:15:00 +0000 (10:15 +0800)]
nvme: introduce nvme_sync_io_queues
Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maxime Ripard [Mon, 2 Nov 2020 16:29:08 +0000 (17:29 +0100)]
drm/vc4: drv: Remove unused variable
The commit
dcda7c28bff2 ("drm/vc4: kms: Add functions to create the state
objects") removed the last users of the vc4 variable, but didn't remove
that variable resulting in a warning.
Fixes:
dcda7c28bff2 ("drm/vc4: kms: Add functions to create the state objects")
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102162908.1436567-1-maxime@cerno.tech
Steven Price [Fri, 30 Oct 2020 14:58:33 +0000 (14:58 +0000)]
drm/panfrost: Fix module unload
When unloading the call to pm_runtime_put_sync_suspend() will attempt to
turn the GPU cores off, however panfrost_device_fini() will have turned
the clocks off. This leads to the hardware locking up.
Instead don't call pm_runtime_put_sync_suspend() and instead simply mark
the device as suspended using pm_runtime_set_suspended(). And also
include this on the error path in panfrost_probe().
Fixes:
aebe8c22a912 ("drm/panfrost: Fix possible suspend in panfrost_remove")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030145833.29006-1-steven.price@arm.com