Prafulla Wadaskar [Fri, 17 Jul 2009 14:26:30 +0000 (19:56 +0530)]
usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root
This change is cheked in Linux source and fix found to be in sync.
This patch is tested for USB host interface on Kirkwood based
Sheevaplug platform (ARM little endian board)
Risk: the impact of this patch is not validated on big endian board.
This need to be checked...
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Wolfgang Denk [Thu, 23 Jul 2009 20:23:23 +0000 (22:23 +0200)]
Coding Style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Wed, 22 Jul 2009 02:59:36 +0000 (22:59 -0400)]
autoconf.mk: include before config.mk for top level files
By including autoconf.mk before config.mk, all top level files can use any
config options it sets up (like <arch>_config.mk) or the Makefile itself
without being forced to use lazy evaluation.
Mark Jackson [Tue, 21 Jul 2009 10:30:53 +0000 (11:30 +0100)]
Remove static declaration from gunzip_bmp()
This patch removes the static declaration from gunzip_bmp()
Without it, the gunzip_bmp() function is not visible to
common/lcd.c and fails to compile with an error.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Peter Tyser [Tue, 21 Jul 2009 02:51:38 +0000 (21:51 -0500)]
cmd_tsi148: General cleanup
- Fix command help message
- Disable DEBUG by default
- Fix whitespace issues
- Fix lines > 80 characters
Signed-off-by: Peter Tyser <ptyser@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Sun, 19 Jul 2009 19:17:03 +0000 (15:17 -0400)]
unify HOST_CFLAGS and HOSTCFLAGS
The top build system sets up HOSTCFLAGS a bit and exports it, but other
places use HOST_CFLAGS instead. Unify the two as HOSTCFLAGS so that the
values stay in sync.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Thu, 23 Jul 2009 19:16:59 +0000 (21:16 +0200)]
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
André Schwarz [Fri, 17 Jul 2009 12:50:24 +0000 (14:50 +0200)]
update config for mvBC-P (MPC5200)
This patch adds I2C support for mvBC-P and defines flash layout
matching the shipped product.
Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
Kumar Gala [Mon, 13 Jul 2009 14:24:00 +0000 (09:24 -0500)]
ahci: Fix gcc 4.4 compiler warning
ahci.c: In function 'ata_scsiop_read_capacity10':
ahci.c:616: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 13 Jul 2009 14:23:59 +0000 (09:23 -0500)]
drivers/bios_emulator: Fix gcc 4.4 compiler warning
biosemu.c: In function 'BE_setVGA':
biosemu.c:147: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Detlev Zundel [Mon, 13 Jul 2009 14:01:19 +0000 (16:01 +0200)]
Re-add support for image type 'Standalone Program'
Support for this type was lost during the bootm refactoring.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Detlev Zundel [Mon, 13 Jul 2009 14:01:18 +0000 (16:01 +0200)]
Add error checking for unsupported OS types.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Peter Tyser [Fri, 10 Jul 2009 23:46:10 +0000 (18:46 -0500)]
ppc: Unlock cache-as-ram in a consistent manner
Previously, non-e500 architectures only unlocked their data cache which
was used as early RAM when booting to Linux using the "bootm" command.
This change causes all PPC boards with CONFIG_SYS_INIT_RAM_LOCK defined
to unlock their data cache during U-Boot's initialization. This
improves U-Boot performance and provides a common cache state when
booting to different OSes.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Wolfgang Denk [Thu, 23 Jul 2009 17:20:26 +0000 (19:20 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Giuseppe CONDORELLI [Thu, 23 Jul 2009 08:54:45 +0000 (04:54 -0400)]
zlib: updated to v.1.2.3
This patch updates zlib to the latest stable version.
Only relevant zlib parts were ported to u-boot tree, as was done for
the previously used version of zlib (0.95). New zlib gives faster
inflate performance and other improvements, see www.zlib.net
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Reviewed-by: Angelo Castello <angelo.castello@st.com>
Edited commit message
Signed-off-by: Wolfgang Denk <wd@denx.de>
Robin Getz [Tue, 21 Jul 2009 16:15:28 +0000 (12:15 -0400)]
Save server's MAC address in environment
Linux's netconsole works much better when you can pass it the MAC address of
the server. (otherwise it just uses broadcast, which everyone else on my
network complains about :)
This sets the env var "serveraddr" (to match ethaddr), so that you can pass
it to linux with whatever bootargs you want to....
addnetconsole=set bootargs $(bootargs) netconsole=@$(ipaddr)/eth0,@$(serverip)/$(serveraddr)
Signed-of-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ilya Yanok [Tue, 21 Jul 2009 15:32:21 +0000 (19:32 +0400)]
fec_mxc: driver for FEC ethernet controller on i.MX27
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Alessio Centazzo [Sat, 11 Jul 2009 18:56:06 +0000 (11:56 -0700)]
ppc4xx: Fixed compilation warning in 4xx_enet.c
This patch fixes a compilation warning for some Ethernet PHY-less
PPC4xx platforms (440SPE based ones) and a potential compilation
error for 440SP platforms (use of undefined 'ethgroup' variable).
In the original code and in case of 440SPE platforms, 'ethgroup'
is initialized to -1 and never modified. Later in the function,
within an #ifdef statement, an 'if statement' executes code only
if 'ethgroup' is set to 4, therefore it is harmless to avoid
executing the 'if statement' by removing the CONFIG_440SPE from
the affected #ifdefs. In case of 440SP platforms with on-board
Ethernet PHY, 'ethgroup' is undefined but used (there are not such
platforms in the repository yet). All other architectures are not
affected by this change.
Signed-off-by: Alessio Centazzo acpatin@yahoo.com
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Michael Zaidman [Tue, 14 Jul 2009 20:37:12 +0000 (23:37 +0300)]
DHCP regression on 2009-06
Fixed the DHCP/BOOTP/RARP regression introduced in u-boot-2009.06
by initializing our IP addr to 0 in order to accept any IP addr
assigned to us by the DHCP/BOOTP/RARP server.
Ack-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Prafulla Wadaskar [Thu, 16 Jul 2009 15:28:02 +0000 (20:58 +0530)]
net: phy: bugfixes: mv88E61xx multichip addressing support
With these fixes, this driver works properly for multi chip
addressging mode
Bugfixes:
1. Build error fixed for function mv88e61xx_busychk_multic-fixed
2. PHY dev address error detection- fixed
3. wrong busy bit was refered in function mv88e61xx_busychk -fixed
4. invalid data read ptr was refered for RD_PHY in case of
multichip addressing mode -fixed
The Multichip Address mode is tested with RD6281A board having
MV88E6165 switch on it
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Simon Kagstrom [Wed, 8 Jul 2009 11:05:11 +0000 (13:05 +0200)]
arm: Kirkwood: Check the error summary bit for error detection
The Marvell documentation for the 88f6281 states that the error coding
is only valid if the error summary and last frame bits in the transmit
descriptor status field are set. This patch adds checks for these for
transmit (I would get transmit errors on bootp with the current check,
which I believe are spurious).
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Simon Kagstrom [Wed, 8 Jul 2009 11:03:18 +0000 (13:03 +0200)]
arm: Kirkwood: Fix compiler optimization bug for kwgbe_send
kwgbe_send/recv both have loops waiting for the hardware to set a bit.
GCC 4.3.3 cleverly optimizes the send case to ... a while(1); loop. This
patch uses readl to force a read from device memory. Other volatile
accesses have also been replaced with readl/writel where appropriate
(as per suggestions on the U-boot mailing list).
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Richard Retanubun [Thu, 2 Jul 2009 17:21:22 +0000 (13:21 -0400)]
MIIPHYBB: Return 0xFFFF if the PHY is not asserting TA.
This patch sets the returned value to 0xFFFF if the PHY does not exist
and does not assert Transfer Acknowledge. A NULL check for the value
pointer is also added for buffer overflow protection.
Without this patch 'mii info' will show 'phantom' devices because the
value will be not be initialized and return with some random value.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Tue, 21 Jul 2009 05:01:11 +0000 (22:01 -0700)]
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
All in-tree boards that use this controller have CONFIG_NET_MULTI added
Also:
- changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X*
- cleaned up line lengths
- modified all boards that override weak function in this driver
- added
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Tested-by: Mike Frysinger <vapier@gentoo.org>
Ben Warren [Fri, 17 Jul 2009 07:50:15 +0000 (00:50 -0700)]
Add warning about upcoming removal of old Ethernet API
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Poonam Aggrwal [Thu, 2 Jul 2009 10:45:13 +0000 (16:15 +0530)]
P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)
These PHYs are on P2020RDB platform.
Also revamped Freescale copyright message in drivers/net/tsec.c.
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Robin Getz [Mon, 20 Jul 2009 18:53:54 +0000 (14:53 -0400)]
Add DNS support
On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.
http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html
>
> DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
> the serverip environment var is updated.
>
> Probably there are some cosmetic issues with the patch. Unfortunatly I
> do not have the time to correct these. So if anybody else likes DNS
> support in U-Boot and has the time, feel free to patch it in the main tree.
Here it is again - slightly modified & smaller:
- update to 2009-06 (Pieter's patch was for U-Boot 1.2.0)
- README.dns is added
- syntax is changed (now takes a third option, the env var to store
the result in)
- add a random port() function in net.c
- sort Makefile in ./net/Makefile
- dns just returns unless a env var is given
- run through checkpatch, and clean up style issues
- remove packet from stack
- cleaned up some comments
- failure returns much faster (if server responds, don't wait for
timeout)
- use built in functions (memcpy) rather than byte copy.
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Kim Phillips [Fri, 17 Jul 2009 17:17:00 +0000 (12:17 -0500)]
net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warning
fix this gcc 4.4 warning:
tsec.c: In function 'tsec_init':
tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Sun, 19 Jul 2009 01:04:08 +0000 (21:04 -0400)]
net: rename NetRxPkt to NetRxPacket
The net code is mostly consistent in using 'Packet' rather than 'Pkt', so
rename the minor detractor to follow suite.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Nobuhiro Iwamatsu [Thu, 25 Jun 2009 07:33:04 +0000 (16:33 +0900)]
sh: sh_eth: Remove garbage from printf
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andreas Pretzsch [Thu, 9 Jul 2009 19:50:05 +0000 (21:50 +0200)]
smc911x: add support for LAN9221
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
David Brownell [Tue, 9 Jun 2009 18:14:24 +0000 (11:14 -0700)]
rm9200 ethernet driver: board-specific quirk (csb337)
CSB337 boards originally shipped with MicroMonitor, not U-Boot;
and with a version using a different convention for recording
Ethernet addresses than anyone else. To avoid breaking Linux
when it uses U-Boot, have it use the same convention on that
hardware.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Wed, 22 Jul 2009 23:00:17 +0000 (01:00 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Wed, 22 Jul 2009 22:59:37 +0000 (00:59 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Wed, 22 Jul 2009 22:57:21 +0000 (00:57 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Wed, 22 Jul 2009 22:57:18 +0000 (00:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Wed, 22 Jul 2009 22:52:30 +0000 (00:52 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Wed, 22 Jul 2009 22:52:25 +0000 (00:52 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Wed, 22 Jul 2009 22:48:20 +0000 (00:48 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/master/
Heiko Schocher [Thu, 16 Jul 2009 07:58:31 +0000 (09:58 +0200)]
arm, kirkwood: added kw_gpio_set_valid() in gpio.h
Signed-off-by: Heiko Schocher <hs@denx.de>
Dieter Kiermaier [Mon, 29 Jun 2009 12:45:08 +0000 (14:45 +0200)]
Kirkwood: add Marvell Kirkwood gpio driver
Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Thu, 16 Jul 2009 07:59:10 +0000 (09:59 +0200)]
arm, kirkwood: added KW_TWSI_BASE in kirkwood.h
Signed-off-by: Heiko Schocher <hs@denx.de>
Prafulla Wadaskar [Thu, 16 Jul 2009 15:32:24 +0000 (21:02 +0530)]
Marvell RD6281A Board support
This is Marvell's 88F6281_A0 based reference design board
This patch is tested for-
1. Boot from DRAM/NAND flash/NFS
2. File transfer using tftp and loadb
3. NAND flash read/write/erase
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Piotr Ziecik [Fri, 17 Jul 2009 14:35:19 +0000 (16:35 +0200)]
api: Fix broken build on ARM.
This patch fixes broken build introduced by commit
84bf7ca522e94ec402a1264b01971b924b7e268f (api: remove un-needed
ifdef CONFIG_API already handle by the Makefile).
Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Wolfgang Denk [Wed, 22 Jul 2009 21:53:23 +0000 (23:53 +0200)]
Fix "ld: cannot find -lstubs" build error
Commit
1bc15386 moved the examples/ to examples/standalone but failed
to adapt the Makefiles that need to link against libstubs.a
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Wolfgang Denk [Sat, 18 Jul 2009 18:47:36 +0000 (20:47 +0200)]
at91cap9adk: fix #ifdef/#endif pairing
The #ifdef/#endif pairing in this file was obviously messed up.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Minkyu Kang [Mon, 20 Jul 2009 02:40:01 +0000 (11:40 +0900)]
ARM Cortex A8: Move OMAP3 specific reset handler
Because of the reset_cpu is soc specific, should be move to soc
Cc: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kumar Gala [Wed, 22 Jul 2009 15:12:39 +0000 (10:12 -0500)]
85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards
The pixis code used in8/out8 all over the place. Replace it with
in_8/out_8 macros.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Tue, 21 Jul 2009 18:51:08 +0000 (13:51 -0500)]
xpedite5370: Enable NAND command support
Use the MPC8572's eLBC to access 1 GB (or greater) onboard NAND flash
via the 'nand' command.
Previously, the XPedite5370's NAND chip selects were properly
configured, but NAND support was not enabled.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Tue, 21 Jul 2009 18:51:07 +0000 (13:51 -0500)]
xes: Increase CONFIG_SYS_BOOTM_LEN to 16MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.
Note that recent Linux kernels for the 85xx and 86xx map greater than
16MB of memory on bootup, but we use 16MB to maintain compatibility with
older Linux kernels for now.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Mon, 20 Jul 2009 00:17:41 +0000 (19:17 -0500)]
xpedite5370: Fix I2C GPIO initialization typo
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Heiko Schocher<hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Mon, 20 Jul 2009 00:17:40 +0000 (19:17 -0500)]
xpedite5200,5370: Use buffered NOR flash writes
Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly
improve NOR flash write speeds
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Fri, 17 Jul 2009 15:14:48 +0000 (10:14 -0500)]
85xx, 86xx: Add common board_add_ram_info()
Previously, 85xx and 86xx boards would display DRAM information on
bootup such as:
...
I2C: ready
DRAM:
Memory controller interleaving enabled: Bank interleaving!
2 GB
FLASH: 256 MB
...
This patch moves the printing of the DRAM controller configuration to a
common board_add_ram_info() function which prints out DDR type, width,
CAS latency, and ECC mode. It also makes the DDR interleaving
information print out in a more sane manner:
...
I2C: ready
DRAM: 2 GB (DDR2, 64-bit, CL=4, ECC on)
DDR Controller Interleaving Mode: bank
FLASH: 256 MB
...
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Fri, 17 Jul 2009 15:14:47 +0000 (10:14 -0500)]
tqm85xx: Remove board_add_ram_info()
This is in preparation for adding one common 8xxx board_add_ram_info()
function for all 8xxx boards
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Fri, 17 Jul 2009 15:14:46 +0000 (10:14 -0500)]
xes: Remove 8xxx board_add_ram_info() function
This is in preparation for adding one common 8xxx board_add_ram_info()
fuction for all 8xxx boards
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Fri, 17 Jul 2009 15:14:45 +0000 (10:14 -0500)]
86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fields
Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match
the 86xx user's manual and other Freescale architectures
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Roy Zang [Thu, 9 Jul 2009 02:05:48 +0000 (10:05 +0800)]
85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boards
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 15 Jul 2009 03:42:01 +0000 (22:42 -0500)]
85xx: Report which "bank" of NOR flash we are booting from on FSL boards
The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of
swizzling the upper address bits of the NOR flash we boot out of which
creates the concept of "virtual" banks. This is useful in that we can
flash a test of image of u-boot and reset to one of the virtual banks
while still maintaining a working image in "bank 0".
The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 15 Jul 2009 18:45:00 +0000 (13:45 -0500)]
86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
The MPC8641HPCN board is capable of swizzling the upper address bit of
the NOR flash we boot out of which creates the concept of "virtual"
banks. This is useful in that we can flash a test of image of u-boot
and reset to one of the virtual banks while still maintaining a
working image in "bank 0".
The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Luigi 'Comio' Mantellini [Tue, 21 Jul 2009 08:45:49 +0000 (10:45 +0200)]
Refresh LZMA-lib to v4.65
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Wolfgang Denk [Fri, 17 Jul 2009 21:35:29 +0000 (23:35 +0200)]
AT91: factor out ROUND() macro
A large number of boards (all AT91 based) duplicated the ROUND()
macro in their board specific config files. Add the definition to
include/common.h and clean up the board config files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Kumar Gala [Wed, 15 Jul 2009 13:54:50 +0000 (08:54 -0500)]
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
We have always mapped at least 16M in the kernel and we have seen cases
with new kernel features that a kernel image needs more than 8M of
memory.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Peter Tyser [Tue, 21 Jul 2009 00:02:21 +0000 (19:02 -0500)]
Move api_examples to examples/api
Also add a rule to remove demo.bin which was previously leftover
after a "make clean"
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Heiko Schocher [Tue, 21 Jul 2009 04:37:28 +0000 (06:37 +0200)]
83xx, kmeter: fix compile error
CONFIG_SYS_MALLOC_LEN is defined in the board config, and
the keymile-common.h, which collects common options used
by all keymile-boards. This results in a compile error
when compiling the kmeter1 board. So remove this define
in the board config file.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Thu, 9 Jul 2009 10:04:26 +0000 (12:04 +0200)]
i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c
This patch adds the possibility to call a board specific
i2c bus reset routine for the fsl_i2c bus driver, and adds
this option for the keymile kmeter1 board.
The deblock sequence for this board is implemented and
tested in the following way:
CR = 0x20 (release SDA and SCL pin)
CR = 0xa0 (start read)
dummy read
dummy read
if 2. dummy read == 0x00
3. dummy read
CR = 0x80 (SDA and SCL now 1 SR = 0x86)
CR = 0x00 (Modul reset SR=0x81)
CR = 0x80 (SDA and SCL = 1, SR = 0x81)
Signed-off-by: Heiko Schocher <hs@denx.de>
Peter Tyser [Fri, 10 Jul 2009 16:03:19 +0000 (11:03 -0500)]
Move examples/ to examples/standalone
The current files in examples are all standalone application examples,
so put them in their own subdirectory for organizational purposes
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Peter Tyser [Fri, 10 Jul 2009 16:03:15 +0000 (11:03 -0500)]
Move architecture specific config.mk files into subdirs
This cleans up U-Boot's toplevel directory a bit and makes the
architecture 'config.mk' file naming and location similar to board
and cpu 'config.mk' files
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Po-Yu Chuang [Fri, 10 Jul 2009 10:25:34 +0000 (18:25 +0800)]
Add "tags" to .gitignore file.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Thu, 9 Jul 2009 10:04:18 +0000 (12:04 +0200)]
powerpc: updates for the keymile boards
- CONFIG_SYS_MAX_I2C_BUS changed to 1
We use only one I2C hardwarecontroller on this boards, so
change the CONFIG_SYS_MAX_I2C_BUS to 1.
- common: dont print errormsg if second IVM Block lacks.
- 82xx, mgcoge: fix double mtdpart entry in environment
- 82xx, mgcoge: activate on second Flash the second bank.
- common: CONFIG_ENV_SIZE 0x4000 for all keymile boards
- common: Change malloc size to 1MByte for all Keymile boards
We need a bigger malloc area for the environment support (128k)
on some Keymile boards (kmeter1) and the upcoming UBI support.
Change it to 1MB for all Keymile boards to be on the save side.
Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for
UBI/UBIFS support.
- Add UBI support to all Keymile boards
- change manner of writing "/localbus/ranges" node
instead of writting the complete "/localbus/ranges" node
before booting Linux, only update the ranges entries
which gets dynamical detected (size of flashes).
This is needed, because keymile adds in the DTS
"/localbus/ranges" node entries, which u-boot must
not overwrite/delete.
- kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips
The Intel P30 chip has 2 non-identical chips on
one die, so we need to define 2 seperate regions
that are scanned by physmap_of independantly.
- kmeter1: Add MTD concat support to Keymile boards
- 82xx, mgcoge: add "unlock=yes" to default environment
- added CONFIG_MTD_DEVICE to get in sync with mainline code
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
galak [Tue, 7 Jul 2009 20:53:21 +0000 (15:53 -0500)]
fsl_sata: Fix compiler warnings shown by gcc-4.4
Update fsl_sata to use common structures instead of casting
back and forth between the fsl specific ones and the common ones
(which are identical).
fsl_sata.c: In function 'scan_sata':
fsl_sata.c:550: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:549: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:548: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:545: note: initialized from here
fsl_sata.c:592: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:590: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:588: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:586: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:579: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Simon Kagstrom [Tue, 7 Jul 2009 13:58:51 +0000 (15:58 +0200)]
Add unaligned.h for arm
This patch adds unaligned.h for ARM (needed to build with LZO
compression). The file is taken from the linux kernel, but includes
u-boot headers instead.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Stefan Roese <sr@denx.de>
Peter Tyser [Mon, 20 Jul 2009 00:17:42 +0000 (19:17 -0500)]
Remove last remanants of unused CONFIG_I2C_CMD_TREE
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Andrzej Wolski [Fri, 17 Jul 2009 20:26:54 +0000 (22:26 +0200)]
ubi: help message correction
Fix incorrect information about size units and correct typo.
Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Mon, 20 Jul 2009 20:57:25 +0000 (22:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Mon, 20 Jul 2009 20:56:57 +0000 (22:56 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ubi
Wolfgang Denk [Mon, 20 Jul 2009 20:55:29 +0000 (22:55 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Mon, 20 Jul 2009 20:52:31 +0000 (22:52 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Peter Tyser [Mon, 20 Jul 2009 00:17:42 +0000 (19:17 -0500)]
Remove last remanants of unused CONFIG_I2C_CMD_TREE
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Andrzej Wolski [Fri, 17 Jul 2009 20:26:54 +0000 (22:26 +0200)]
ubi: help message correction
Fix incorrect information about size units and correct typo.
Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Stefan Roese <sr@denx.de>
Ilya Yanok [Mon, 29 Jun 2009 13:53:16 +0000 (17:53 +0400)]
mmc: set bus width to 1 and clock to minimum early during initialization
We need to switch back to 1-bit before initialization or SD 2.0 cards
will fail to send SCR if we've switched to 4-bit already.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Shinya Kuribayashi [Sat, 20 Jun 2009 10:14:33 +0000 (19:14 +0900)]
config.mk: Remove unused HPATH
This variable is not unused anywhere.
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
Grzegorz Bernacki [Wed, 17 Jun 2009 14:20:14 +0000 (16:20 +0200)]
digsy mtc: Enable command line history.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Mike Frysinger [Thu, 2 Jul 2009 23:23:25 +0000 (19:23 -0400)]
compiler.h: unify system ifdef cruft here
Shove a lot of the HOSTCC and related #ifdef checking crap into the new
compiler.h header so that we can keep all other headers nice and clean.
Also introduce custom uswap functions so we don't have to rely on the non
standard implementations that a host may (or may not in the case of OS X)
provide. This allows mkimage to finally build cleanly on an OS X system.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Kim Phillips [Mon, 15 Jun 2009 16:50:40 +0000 (11:50 -0500)]
common: fix 'dummy' is used uninitialized in this function warning
fix this gcc 4.4 warning:
xyzModem.c: In function 'xyzModem_stream_open':
xyzModem.c:564: warning: 'dummy' is used uninitialized in this function
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Mike Frysinger [Mon, 15 Jun 2009 03:33:14 +0000 (23:33 -0400)]
push CROSS_COMPILE out to $(ARCH)_config.mk
Each arch should handle setting a proper default CROSS_COMPILE value in
their own config.mk file rather than having to maintain a large ugly list
in the Makefile. By using conditional assignment, we don't have to worry
about the variable already being set (env/cmdline/etc...).
The common config.mk file takes care of exporting CROSS_COMPILE already,
and while a few variables (toolchain ones) utilize CROSS_COMPILE before
including the arch config.mk, they do so with deferred assignment.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 13 Jun 2009 10:55:37 +0000 (12:55 +0200)]
malloc.h: protect it against multiple include
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Sun, 19 Jul 2009 17:37:24 +0000 (19:37 +0200)]
Fix boards broken after removal of legacy NAND and DoC support
Commit
2419169f removed support for legacy NAND and disk on chip but
missed to update the code for a few boards. This patch fixes the
resulting build issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 19 Jul 2009 17:32:37 +0000 (19:32 +0200)]
cmd_flash.c: fix fix compile error for boards with DataFlash
Commit
5669ed45 ("cmd_flash.c: fix warning: unused variable
'addr_first'/'addr_last'") changed the #ifdef logic areound the
declaration of these variables and missed a combination of settings
of HAS_DATAFLASH with SYS_NO_FLASH; this patch fixes this.
Also spotted by Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 19 Jul 2009 10:05:15 +0000 (12:05 +0200)]
pcm030: fix out-of-tree building
Commit
0a87dd90 that was supposed to fix out-of-tree building for the
pcm030 board was unfortunately incomplete.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Simon Kagstrom [Tue, 7 Jul 2009 11:58:51 +0000 (13:58 +0200)]
Add unaligned.h for arm
This patch adds unaligned.h for ARM (needed to build with LZO
compression). The file is taken from the linux kernel, but includes
u-boot headers instead.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Stefan Roese <sr@denx.de>
Kazuaki Ichinohe [Fri, 12 Jun 2009 09:10:12 +0000 (18:10 +0900)]
Canyonlands SATA harddisk driver
This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This patch corresponded to not cmd_scsi but cmd_sata.
This patch divided an unused member with ifndef __U_BOOT__ in the structure.
[environment variable, boot script]
setenv bootargs root=/dev/sda7 rw
setenv bootargs ${bootargs} console=ttyS0,115200
ext2load sata 0:2 0x400000 /canyonlands/uImage
ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
fdt addr 0x800000 0x4000
bootm 0x400000 - 0x800000
If you drive SATA-2 disk on Canyonlands, you must change parts from
PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
following disks:
1.Vendor: Fujitsu Type: MHW2040BS
2.Vendor: Fujitsu Type: MHW2060BK
3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required)
7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required)
8.Vendor: Transcend Type: TS32GSSD25S-M
9.Vendor: MTRON Type: MSD-SATA1525-016
Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
Reinhard Arlt [Wed, 10 Jun 2009 17:09:40 +0000 (19:09 +0200)]
Add support for the Tundra TSI148 VME-bridge
From: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
This patch adds support for the Tundra TSI148 VME-bridge. It's used on
the upcoming esd VME8349 board.
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Thu, 16 Jul 2009 23:05:30 +0000 (19:05 -0400)]
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
MAC addresses should not be hardcoded in boards to avoid random link level
conflicts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 10 Jul 2009 14:42:06 +0000 (10:42 -0400)]
Blackfin: bf533-stamp: back down SCLK a bit
While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher
SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with
the shortened SDRAM traces. So lower the SCLK speed down to a value that
all three can handle.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 10 Jul 2009 00:56:56 +0000 (20:56 -0400)]
Blackfin: split cpu COBJS into multilines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 9 Jul 2009 05:15:05 +0000 (01:15 -0400)]
Blackfin: add os log functions
Part of the mini Blackfin ABI with operating systems is that they can use
0x4f0-0x4f8 to pass log buffers to/from bootloaders. So add support to
U-Boot for reading the log buffer.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Kim Phillips [Sat, 18 Jul 2009 23:42:13 +0000 (18:42 -0500)]
mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Wolfgang Denk [Sat, 18 Jul 2009 23:15:52 +0000 (01:15 +0200)]
PATI board: fix compiler warnings
Fix these:
pati.c: In function 'checkboard':
pati.c:358: warning: pointer targets in passing argument 2 of 'getenv_r' differ in signedness
../common/flash.c: In function 'write_word':
../common/flash.c:824: warning: dereferencing type-punned pointer will break strict-aliasing rules
cmd_pati.c: In function 'do_pati':
cmd_pati.c:279: warning: 'value' may be used uninitialized in this function
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 16 May 2009 10:14:56 +0000 (12:14 +0200)]
mpl: printing current stdio devices cleanup
Currently the mpl boards duplicate the code to print the current
devices from common/console.c; use stdio_print_current_devices()
instead
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 16 May 2009 10:14:55 +0000 (12:14 +0200)]
console: unify printing current devices
Create stdio_print_current_devices() for this purpose
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>