Juan Quintela [Mon, 31 Aug 2009 14:07:13 +0000 (16:07 +0200)]
vga: export vga_ioport_{read,write}
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 31 Aug 2009 14:07:12 +0000 (16:07 +0200)]
cirrus_vga: prefix vga_ioport_{read, write} with cirrus
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 31 Aug 2009 14:07:11 +0000 (16:07 +0200)]
vga: remove useless cast from void *
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Mon, 7 Sep 2009 19:00:18 +0000 (19:00 +0000)]
USB: use opaque parameter passing for monitor handle
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 6 Sep 2009 16:34:18 +0000 (16:34 +0000)]
Sparc64: use ISA bus for i8042
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 6 Sep 2009 16:32:34 +0000 (16:32 +0000)]
Sparc64: remove unused variables
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 6 Sep 2009 16:32:13 +0000 (16:32 +0000)]
Make ioport default tables const
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 6 Sep 2009 16:31:58 +0000 (16:31 +0000)]
Fix indentation
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
malc [Sun, 6 Sep 2009 02:31:09 +0000 (06:31 +0400)]
When targeting PPU use rlwinm instead of andi. if possible
andi. is microcoded and slow there.
Signed-off-by: malc <av1474@comtv.ru>
malc [Sun, 6 Sep 2009 02:49:03 +0000 (06:49 +0400)]
Checks in select_soundhw were never intended to accept abbreviations
Signed-off-by: malc <av1474@comtv.ru>
Blue Swirl [Sat, 5 Sep 2009 10:14:07 +0000 (10:14 +0000)]
Fix Sparse warnings: add "static"
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Sat, 5 Sep 2009 06:24:47 +0000 (06:24 +0000)]
esp: handle "select without attention"
Up to now "select without attention" was handled the same way as
"select with attention". According to
http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
select without ATN sends the CDB (Command Descriptor Block) directly,
whereas select with ATN sends one message phase byte
followed by 6, 10, or 12 command phase bytes.
The attached patch implements the behaviour described above.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 4 Sep 2009 17:47:09 +0000 (17:47 +0000)]
Include sys-queue.h early to override system queue definitions on BSD
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 4 Sep 2009 17:43:37 +0000 (17:43 +0000)]
Shuffle lines to avoid gcc 3 warning about redundant redeclaration
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Fri, 4 Sep 2009 15:13:29 +0000 (10:13 -0500)]
Bring pcbios, seabios, and vgabios into the tree as git submodules. Right now,
they aren't integrated into the build but we can do that incrementally.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 28 Aug 2009 17:37:00 +0000 (19:37 +0200)]
mips malta: Fix fdc regression and use qdev for i8042 setup
8baf73adf664e79eae201c3f618078a220a661d9 (qdev/isa: convert fdc)
breaks MIPS Malta:
Tried to create isa device isa-fdc with no isa bus present
Fix this by creating an isa bus for piix4.
This change also requires some more qdev related changes
(similar changes were applied to pc.c) and allows
cleaning of piix3/piix4 code.
Thanks to Gerd Hoffmann for his hints.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:32 +0000 (15:27 -0300)]
Introduce QDict unit-tests
This suite contains tests to assure that QDict API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qdict
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:31 +0000 (15:27 -0300)]
Introduce QDict test data file
This file is used by the QDict stress test, it adds 5k nodes
on the dictionary and performs various operations.
My original file had 21k entries and almost 400k of size. After
some discussion with Eduardo Habkost, I decided to reduce the
size.
There are ways to generate this kind of data dynamically, but
it has its problems too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:30 +0000 (15:27 -0300)]
Introduce QString unit-tests
This suite contains tests to assure that QString API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qstring
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:29 +0000 (15:27 -0300)]
Introduce QInt unit-tests
This suite contains tests to assure that QInt API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qint
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:28 +0000 (15:27 -0300)]
Add check support
Check is a unit testing framework for C.
All the QObjects have unit-tests and more will be written for the
future data types.
More info about check can be found at:
http://check.sourceforge.net/
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:27 +0000 (15:27 -0300)]
monitor: Update supported types documentation
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:26 +0000 (15:27 -0300)]
monitor: fail when 'i' type is greater than 32-bit
The 'i' argument type is for 32-bit only and most handlers
will use an 'int' to store its value.
It's better to fail gracefully when the user enters a value
greater than 32-bit than to get subtle casting bugs.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:25 +0000 (15:27 -0300)]
monitor: Drop args[] handling code
This commit drops all the code used to handle the 'args[]' array,
as now we use a dictionary to pass arguments.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:24 +0000 (15:27 -0300)]
monitor: Drop str_allocated[]
It's not used anymore, as QDict is now used to handle string
memory allocation/deallocation.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:23 +0000 (15:27 -0300)]
monitor: Drop unused macros
GET_TLONG() and GET_TPHYSADDR() are not needed anymore, QInt can
handle such conversions.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:22 +0000 (15:27 -0300)]
monitor: Split monitor_handle_command()
In order to help the integration with unit-tests and having a better
design, this commit splits monitor_handle_command() into two parts.
The parsing code is moved to a function called monitor_parse_command(),
while allocating memory and calling the handler is still done by
monitor_handle_command().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:21 +0000 (15:27 -0300)]
monitor: Port handler_10 to use QDict
This commit ports command handlers that receive ten arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:20 +0000 (15:27 -0300)]
monitor: Drop handler_8 and handler_9
Commit
79c4f6b08009a1d23177c2be8bd003253cf3686a added handler_8 and
handler_9 handling, but there isn't any command handler with those
number of arguments.
Just drop them.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:19 +0000 (15:27 -0300)]
monitor: Port handler_7 to use QDict
This commit ports command handlers that receive seven arguments to
use the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:18 +0000 (15:27 -0300)]
monitor: Port handler_6 to use QDict
This commit ports command handlers that receive six arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:17 +0000 (15:27 -0300)]
monitor: Port handler_5 to use QDict
This commit ports command handlers that receive five arguments to use
the new monitor's dictionary.
Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:16 +0000 (15:27 -0300)]
monitor: Port handler_4 to use QDict
This commit ports command handlers that receive four arguments to use
the new monitor's dictionary.
Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:15 +0000 (15:27 -0300)]
monitor: Port handler_3 to use QDict
This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:14 +0000 (15:27 -0300)]
monitor: Port handler_2 to use QDict
This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:13 +0000 (15:27 -0300)]
monitor: Port handler_1 to use QDict
This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:12 +0000 (15:27 -0300)]
monitor: Port handler_0 to use QDict
This commit ports command handlers that receive no arguments to use
the new monitor's dictionary.
It might seem no sense to do this, as the handlers have no arguments,
but at the end of this porting work all handlers will have the same
structure.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:11 +0000 (15:27 -0300)]
monitor: Export QDict header
Command handlers will have to use QDict functions, so export
qdict.h through monitor.h.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:10 +0000 (15:27 -0300)]
monitor: Setup a QDict with arguments to handlers
With this commit monitor_handle_command() will be able to setup a
QDict with arguments to command handlers.
However, the current 'args[]' method is still being used, next
changes will port commands to get their arguments from the dictionary.
Two changes are worth noting:
1. The '/' argument type always adds the following standard keys in the
dictionary: 'count', 'format' and 'size'. This way, the argument
name used in the 'args_type' string doesn't matter
2. The optional argument type '?' doesn't need to pass the additional
'has_arg' argument, hanlders can do the same check with qdict_haskey()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:09 +0000 (15:27 -0300)]
monitor: New format for handlers argument types
Current handlers argument types, as defined in qemu-monitor.hx file,
are a sequence of chars where each one represents one argument type
of the command handler. The number of chars is also used to know how
many arguments a given handler accepts.
This commit defines a new format, which makes mandatory the use of
a name for each argument.
For example, do_eject() command handler is currently defined as:
{ "eject", "-fB", do_eject, ... }
With the new format it becomes:
{ "eject", "force:-f,filename:B", do_eject, ... }
This way the Monitor will be capable of setting up a dictionary, using
each argument's name as the key and the argument itself as the value.
This commit also adds two new functions: key_get_info() and
next_arg_type(), both are used to parse the new format.
Currently key_get_info() consumes the 'key' part of the new format and
discards it, this way the current parsing code is not affected by this
change.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:08 +0000 (15:27 -0300)]
Add wrappers to functions used by the Monitor
Some functions exported to be used by the Monitor as command
handlers are also called in other places as regular functions.
When those functions got ported to use the Monitor dictionary
to pass argments, the callers will have to setup a dictionary
to be able to call them.
To avoid this problem, this commit add wrappers to those functions,
so that we change the wrapper to accept the dictionary, letting
the current functions as is.
The following wrappers are being added:
- do_help_cmd()
- do_pci_device_hot_remove()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:07 +0000 (15:27 -0300)]
Introduce QDict
QDict is a high-level dictionary data type that can be used to store a
collection of QObjects. A unique key is associated with only one
QObject.
The following functions are available:
- qdict_new() Create a new QDict
- qdict_put() Add a new 'key:object' pair
- qdict_get() Get the QObject of a given key
- qdict_del() Delete a 'key:object' pair
- qdict_size() Return the size of the dictionary
- qdict_haskey() Check if a given 'key' exists
Some high-level helpers to operate on QStrings and QInts objects
are also provided.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:06 +0000 (15:27 -0300)]
Introduce QString
QString is a high-level data type that can be used to represent
C strings.
The following functions are available:
- qstring_from_str() Create a new QString
- qstring_get_str() Get a pointer to the stored string
Note that qstring_get_str() is too low-level for a data type like
this, but it's interesting for quick read-only accesses.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:05 +0000 (15:27 -0300)]
Introduce QInt
QInt is a high-level data type that can be used to represent integers,
internally it stores an int64_t value.
The following functions are available:
- qint_from_int() Create a new QInt
- qint_get_int() Get the stored integer
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:04 +0000 (15:27 -0300)]
Introduce QObject
This commit introduces the qobject.h header file, it contains
basic QObject definitions and helper macros.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 28 Aug 2009 14:37:42 +0000 (16:37 +0200)]
ide: move cmd+irq from IDEState to IDEBus.
These variables are per bus, not per drive. Lets move them and
cleanup things a bit. And fix the cmd migration bug for real.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 28 Aug 2009 13:47:03 +0000 (15:47 +0200)]
ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Thu, 27 Aug 2009 17:51:16 +0000 (19:51 +0200)]
Support for multiple -monitor devices
Rebased version of Anthony's patch: Allow to specify more than one
monitor terminal via the -monitor command line switch. This is
particularly useful when libvirt or some other management tool already
occupies the primary monitor but you need another one for debugging.
The current clumsy workaround is to multiplex such additional terminals
over a qemu character device (e.g. -serial mon:<device>).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Wed, 26 Aug 2009 10:47:04 +0000 (12:47 +0200)]
net: Fix send queue ordering
Ensure that packets enqueued for delayed delivery are dequeued in FIFO
order. At least one simplistic guest TCP/IP stack became unhappy due to
sporadically reordered packet streams.
At this chance, switch the send queue implementation to TAILQ.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Glauber Costa [Tue, 25 Aug 2009 22:13:36 +0000 (18:13 -0400)]
do not issue ioctl from within the io thread
According to Documentation/kvm/api.txt, (and well, to common sense),
we should not be calling vcpu ioctls from within the iothread.
Since vcpu initialization issues a vcpu ioctl, move it a little bit
further in time to prevent it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 17:25:15 +0000 (19:25 +0200)]
Delay sighandler_setup()
If we are using --serial telnet:0:5555,server or similar, ^C will not
kill qemu. We need to first connect using telnet, and the the ^C takes
effect.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Thu, 27 Aug 2009 12:31:24 +0000 (18:01 +0530)]
Remove typedef for bool from eepro100.c
eepro100.c shouldn't have the need to do this in its local header file.
And I recently started getting this:
$ make -j3
...
CC x86_64-softmmu/eepro100.o
/home/amit/src/qemu/hw/eepro100.c:112: error: two or more data types
in declaration specifiers
/home/amit/src/qemu/hw/eepro100.c:112: warning: useless type name in
empty declaration
make[1]: *** [eepro100.o] Error 1
so just remove the typedef and include <stdbool.h> instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Fri, 28 Aug 2009 08:49:57 +0000 (10:49 +0200)]
add documentation for multi-core features
extend QEMU's internal help and man page to cover the recently
added multi-core feature.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:27 +0000 (15:28 +0200)]
piix3: use new vmstate infrastructure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:26 +0000 (15:28 +0200)]
i440fx: use new vmstate infrastructure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:25 +0000 (15:28 +0200)]
VMState: Fix sub-structs versioning
We can't check the version in a substruct, it is not stored anywhere
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:24 +0000 (15:28 +0200)]
Update SaveVM versions
Now that we have all fields belonging to a PCIDevice, save each field
on the device that it belongs. This means moving pci_irq_levels
from PCII440FXState to PIIX3State.
Old formats are loaded, but we only save on the new saner format.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:23 +0000 (15:28 +0200)]
pci_irq_levels[] belong to PIIX3State
With previous cleanups, now it is possible to put it where it belongs
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:22 +0000 (15:28 +0200)]
Save irq_state into PCII440FXState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:21 +0000 (15:28 +0200)]
We can add piix3_dev now to PIIX3IrqState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:20 +0000 (15:28 +0200)]
Fold piix3_init() intto i440fx_init
i440fx_init will now work properly if we don't setup piix3
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:19 +0000 (15:28 +0200)]
Introduce PIIX3IrqState for piix3 irq's state
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:18 +0000 (15:28 +0200)]
Create PIIX3State instead of using PCIDevice for PIIX3
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:17 +0000 (15:28 +0200)]
We want the argument pass to set_irq to be opaque
piix_pci want to pass more things that the pic
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:16 +0000 (15:28 +0200)]
Move smm_enabled and isa_memory_mappings to PCII440FXState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:15 +0000 (15:28 +0200)]
Use PCII440FXState instead of generic PCIDevice
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:14 +0000 (15:28 +0200)]
low_set_irq is not used anywhere
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:13 +0000 (15:28 +0200)]
Split piix4 support from piix_pci.c
Now mips_malta uses piix4 and pc's use piix_pci definitions
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:12 +0000 (15:28 +0200)]
piix4 don't use pci_irq_levels at all
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Edgar E. Iglesias [Fri, 4 Sep 2009 08:38:59 +0000 (10:38 +0200)]
microblaze: Trap on illegal load/store sizes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Fri, 4 Sep 2009 07:40:49 +0000 (09:40 +0200)]
microblaze: Correct FPU decoding masks.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 20:28:21 +0000 (22:28 +0200)]
microblaze: Compute masks for alignment checks at translation time.
Thanks to Blue Swirl for reporting.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 11:25:09 +0000 (13:25 +0200)]
microblaze: Trap on bus accesses to unmapped areas.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 11:04:02 +0000 (13:04 +0200)]
microblaze: MMU shows more respect to synthesis config.
The microblaze MMU can be synthesized in different configurations.
Have the MMU model show more respect to the chosen configuration.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 10:59:46 +0000 (12:59 +0200)]
microblaze: Trap on unaligned data accesses.
Untested...
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 10:52:01 +0000 (12:52 +0200)]
microblaze: Trap on divizions by zero.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 09:18:55 +0000 (11:18 +0200)]
microblaze: Correct mfs into r0.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 09:12:30 +0000 (11:12 +0200)]
microblaze: Catch illegal insns and privilege violations.
Raise illegal instruction exceptions when executing instructions that
require units not available on the particulare microblaze configuration.
Also trap priviliege violations made by userspace.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 08:25:00 +0000 (10:25 +0200)]
microblaze: Add infrastructure for supporting hw exceptions.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 08:15:17 +0000 (10:15 +0200)]
microblaze: Clear exception in dslot ESR bit if not in dslot.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 08:13:08 +0000 (10:13 +0200)]
microblaze: Correct MMU debug log.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Kirill A. Shutemov [Wed, 2 Sep 2009 15:18:04 +0000 (18:18 +0300)]
Fix warning on x86_64
audio/esdaudio.c: In function 'qesd_thread_out':
audio/esdaudio.c:136: error: format '%d' expects type 'int', but
argument 3 has type 'ssize_t'
audio/esdaudio.c: In function 'qesd_thread_in':
audio/esdaudio.c:366: error: format '%d' expects type 'int', but
argument 3 has type 'ssize_t'
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: malc <av1474@comtv.ru>
Blue Swirl [Mon, 31 Aug 2009 19:30:21 +0000 (19:30 +0000)]
Sparc32: port sun4c interrupt controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 19:30:18 +0000 (19:30 +0000)]
Sparc32: port timers to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 19:30:17 +0000 (19:30 +0000)]
Sparc32: timer field is never NULL
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 19:30:15 +0000 (19:30 +0000)]
Add VMState support for ptimers
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Mon, 31 Aug 2009 17:03:51 +0000 (19:03 +0200)]
esp (sparc32) Extra scsi data.
> ESP: Message Accepted (12)
> ESP: Transfer status (sense=0)
> ESP: read reg[5]: 0x20
> ESP: read reg[4]: 0x07
> ESP: read reg[7]: 0x02
> Extra scsi data. Fatal error.
It looks like "Message Accepted" shouldn't write a response. At least
ESP_RFLAGS must definetely be 0. With the following fix OBP goes one
step further:
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Mon, 31 Aug 2009 14:29:34 +0000 (16:29 +0200)]
Fix compiler warnings
Starting with commit
df7a86ed735eafefbd046c8cad7134652fe3f600,
mingw32 builds result in a compiler warning for dns_addr:
CC slirp/slirp.o
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’)
Removing the assignment fixes the warning without the need of special code
for mingw32 (and also saves some bytes in the resulting binary).
To fix another potential compiler warning, the missing 'static'
attribute was added.
The same changes were applied to dns_addr_time.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 15:14:40 +0000 (15:14 +0000)]
Fix breakage due to __thread
Thread-local storage is not supported on all hosts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:37:34 +0000 (16:37 +0300)]
Fix gcc 3 warning: comparison is always true due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:37:26 +0000 (16:37 +0300)]
Fix gcc 3 warning about uninitialized variable
If nb_sectors is 0, cluster_offset will not be initialized.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:37:09 +0000 (16:37 +0300)]
Sparc32: port Slavio misc devices to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:36:58 +0000 (16:36 +0300)]
Sparc32: port ECC memory controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:46:21 +0000 (20:46 +0000)]
Sparc32: port IOMMU to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:46:15 +0000 (20:46 +0000)]
Sparc32: port DMA controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:43:01 +0000 (20:43 +0000)]
Sparc32: port TCX to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:22:52 +0000 (20:22 +0000)]
Sparc32: port interrupt controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 19:47:11 +0000 (19:47 +0000)]
Update OpenBIOS images to r569
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 19:12:16 +0000 (19:12 +0000)]
Suppress kraxelisms
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 19:04:13 +0000 (19:04 +0000)]
Fix Sparc64 breakage: add dummy ISA irqs
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>