Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (24 commits)
  agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses
  agp: add user mapping support to ATI AGP bridge.
  drm/i915: enable GEM on PAE.
  drm/radeon: fix unused variables warning
  agp: switch AGP to use page array instead of unsigned long array
  agpgart: detected ALi M???? chipset with M1621
  drm/radeon: command stream checker for r3xx-r5xx hardware
  drm/radeon: Fully initialize LVDS info also when we can't get it from the ROM.
  radeon: Fix CP byte order on big endian architectures with KMS.
  agp/uninorth: Handle user memory types.
  drm/ttm: Add some powerpc cache flush code.
  radeon: Enable modesetting on non-x86.
  drm/radeon: Respect AGP cant_use_aperture flag.
  drm: EDID endianness fixes.
  drm/radeon: this VRAM vs aperture test is wrong, just remove it.
  drm/ttm: fix an error path to exit function correctly
  drm: Apply "Memory fragmentation from lost alignment blocks"
  ttm: Return -ERESTART when a signal interrupts bo eviction.
  drm: Remove memory debugging infrastructure.
  drm/i915: Clear fence register on tiling stride change.
  ...

Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Fix the removal of opts->fs_dmask

Merge branch 'for-2.6.31' of git://git./linux/kernel/git/bart/ide-2.6

* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits)
  ide-cd: prevent null pointer deref via cdrom_newpc_intr
  ide: BUG() on unknown requests
  ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
  ide: do not access ide_drive_t 'drive_data' field directly
  sl82c105: implement test_irq() method
  siimage: implement test_irq() method
  pdc202xx_old: implement test_irq() method (take 2)
  cmd64x: implement test_irq() method
  cmd640: implement test_irq() method
  ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
  ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
  siimage: use ide_dma_test_irq() (take 2)
  cmd64x: implement clear_irq() method (take 2)
  ide: call clear_irq() method in ide_timer_expiry()
  sgiioc4: coding style cleanup
  ide: don't enable IORDY at a probe time
  ide: IORDY handling fixes
  ata: add ata_id_pio_need_iordy() helper (v2)
  ide-tape: fix build issue
  ide: unify interrupt reason checking
  ...

x86: don't use 'access_ok()' as a range check in get_user_pages_fast()

It's really not right to use 'access_ok()', since that is meant for the
normal "get_user()" and "copy_from/to_user()" accesses, which are done
through the TLB, rather than through the page tables.

Why? access_ok() does both too few, and too many checks.  Too many,
because it is meant for regular kernel accesses that will not honor the
'user' bit in the page tables, and because it honors the USER_DS vs
KERNEL_DS distinction that we shouldn't care about in GUP.  And too few,
because it doesn't do the 'canonical' check on the address on x86-64,
since the TLB will do that for us.

So instead of using a function that isn't meant for this, and does
something else and much more complicated, just do the real rules: we
don't want the range to overflow, and on x86-64, we want it to be a
canonical low address (on 32-bit, all addresses are canonical).

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fat: Fix the removal of opts->fs_dmask

(ce3b0f8d5c2203301fc87f3aaaed73e5819e2a48: New helper - current_umask())
is removing the opts->fs_dmask, probably it's a cut-and-paste
miss or something.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

ide-cd: prevent null pointer deref via cdrom_newpc_intr

With 2.6.30, the error handling code in cdrom_newpc_intr was changed
to deal with partial request failures by normally completing the 'good'
parts of a request and only 'error' the last (and presumably,
incompletely transferred) bio associated with a particular
request. In order to do this, ide_complete_rq is called over
ide_cd_error_cmd() to partially complete the rq. The block layer
does partial completion only for requests with bio's and if the
rq doesn't have one (eg 'GPCMD_READ_DISC_INFO') the request is
completed as a whole and the drive->hwif->rq pointer set to NULL
afterwards. When calling ide_complete_rq again to report
the error, this null pointer is derefenced, resulting in a kernel
crash.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13399.

Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses

Otherwise, the high bits to be stuffed in the unused lower bits of the
page address are lost.

Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (342 commits)
  Staging: comedi: fix build errors
  Staging: udlfb: update to version 0.2.3
  Staging: udlfb: fix some sparse warnings.
  Staging: udlfb: clean up checkpatch warnings in udlfb.c
  Staging: udlfb: clean up checkpatch warnings in udlfb.h
  Staging: udlfb: add udlfb driver to build
  Staging: add udlfb driver
  Staging: pata_rdc: remove pointless comments
  Staging: pata_rdc: remove DRIVER macros
  Staging: pata_rdc: remove dbgprintf macro
  Staging: pata_rdc: remove broken flag
  Staging: pata_rdc: fix build warnings
  Staging: pata_rdc: use PCI_DEVICE
  Staging: pata_rdc: remove function prototypes
  Staging: pata_rdc: coding style fixes
  Staging: pata_rdc: convert code to work in 2.6.29
  Staging: pata_rdc: add driver to the build system
  Staging: add pata_rdc driver
  Staging: remove obsolete serqt_usb driver
  Staging: serqt_usb2 add the driver to the build
  ...

Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  inotify: inotify_destroy_mark_entry could get called twice

Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: New macro to initialize i2c address lists on the fly
  i2c: Don't advertise i2c functions when not available
  i2c: Use rwsem instead of mutex for board info
  i2c: Add a sysfs interface to instantiate devices
  i2c: Limit core locking to the necessary sections
  i2c: Kill the redundant client list
  i2c: Kill is_newstyle_driver
  i2c: Merge i2c_attach_client into i2c_new_device
  i2c: Drop i2c_probe function
  i2c: Get rid of the legacy binding model
  i2c: Kill client_register and client_unregister methods

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Fix kernel-doc parameter name typo in blk-settings.c:
  block: rename CONFIG_LBD to CONFIG_LBDAF
  block: Fix bounce_pfn setting
  hd: stop defining MAJOR_NR

Merge git://git./linux/kernel/git/davem/sparc-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6:
  sparc64: Fix UP bootup regression.

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: convert page/tlb to asm-generic
  Blackfin: convert types to asm-generic
  Blackfin: convert irq/process to asm-generic
  Blackfin: convert signal/mmap to asm-generic
  Blackfin: convert locking primitives to asm-generic
  Blackfin: convert termios to asm-generic
  Blackfin: convert simple headers to asm-generic
  Blackfin: convert socket/poll to asm-generic
  Blackfin: convert user/elf to asm-generic
  Blackfin: convert shm/sysv/ipc to asm-generic
  Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h
  Blackfin: only build irqpanic.c when needed
  Blackfin: pull in asm/io.h in ksyms for prototypes
  Blackfin: use common test_bit() rather than __test_bit()

MAINTAINERS: kmemtrace pattern update

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: ieee802154 fix pattern typo

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update wireless.h path

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Ftrace documentation pattern

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: fix Atheros pattern paths

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bob Copeland <me@bobcopeland.com>
Cc: "Luis R . Rodriguez" <lrodriguez@atheros.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: do not allow VESA modes without compiled-in drivers

Do not accept VESA modes by the "vga=" kernel parameter if there is no
frame buffer driver compiled-in to handle it.

Also, there is a comment added to the Kconfig description after Werner
Lemberg's suggestion

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13249

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reported-by: Werner Lemberg <wl@gnu.org>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: pair names/addresses in EDAC-I82975X

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ranganathan Desikan <rdesikan@jetzbroadband.com>
Cc: "Arvind R." <arvind@acarlab.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: mark dma_sync_single and dma_sync_sg as deprecated

dma_sync_single() and dma_sync_sg() have been described as "Backwards
compat, remove in 2.7.x" for a long time (since 2.6.5).

This marks dma_sync_single() and dma_sync_sg() as deprecated so the users
get notified before removing them.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: mark DMA_nBITS_MASK as deprecated

Mark them deprecated so that out-of-tree developers get notified about
this before their modules break when these macros are removed.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

convert some DMA_nnBIT_MASK() callers

We're about to make DMA_nnBIT_MASK() emit `deprecated' warnings.  Convert the
remaining stragglers which are visible to the x86_64 build.

Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsil.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Yi Zou <yi.zou@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: moxa, prevent opening unavailable ports

In moxa.c there are 32 minor numbers reserved for each device.  The number
of ports actually available per device is stored in
moxa_board_conf->numPorts.  This number is not considered in moxa_open().
Opening a port that is not available results in a kernel oops.  This patch
adds a test to moxa_open() that prevents opening unavailable ports.

[akpm@linux-foundation.org: avoid multiple returns]
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

istallion: add missing __devexit marking

The remove member of the pci_driver stli_pcidriver uses __devexit_p(), so
the remove function itself should be marked with __devexit.  Even more so
considering the probe function is marked with __devinit.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dtlk: off by one in {read,write}_tts()

With a postfix increment retries is incremented beyond DTLK_MAX_RETRIES so
the error message is not displayed correctly.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: James R. Van Zandt <jrv@vanzandt.mv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace: wait_task_zombie: do not account traced sub-threads

The bug is ancient.

If we trace the sub-thread of our natural child and this sub-thread exits,
we update parent->signal->cxxx fields.  But we should not do this until
the whole thread-group exits, otherwise we account this thread (and all
other live threads) twice.

Add the task_detached() check.  No need to check thread_group_empty(),
wait_consider_task()->delay_group_leader() already did this.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: make rtc_update_irq callable with irqs enabled

The rtc_update_irq() might be called with irqs enabled, if a interrupt
handler was registered without IRQF_DISABLED.  Use
spin_lock_irqsave/spin_unlock_irqrestore instead of spin_lock/spin_unlock.

Also update kerneldoc and drivers which do extra work to follow the
current interface spec, as suggestted by David Brownell.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc8xxx: s/83xx/8xxx/g

Since we renamed the file, we might want to rename the file internals too.

Though we don't bother with changing platform driver name and platform
module alias.  The stuff is legacy and hopefully we'll remove it soon.

Suggested-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: rename spi_83xx.c to spi_8xxx.c

The driver handles MPC83xx, MPC85xx and MPC86xx SPI controllers, so rename
the file for clarity.

Suggested-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: remove dead code

This patch removes #if 0'ed code, and spi_mpc83xx->busy variable that is
used by that dead snippet only.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: split mpc83xx_spi_work() into two routines

mpc83xx_spi_work() is quite large, with up to five indentation levels and
is quite difficult to read.

So, split the function in two parts:
1. mpc83xx_spi_work() now only traverse queued spi messages;
2. mpc83xx_spi_do_one_msg() only manages single messages.

There should be no functional changes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: fix checkpatch issues

Checkpatch is spitting errors when seeing the rename patch, so fix the
errors prior to moving.

Following errors and warnings were fixed:

   WARNING: Use #include <linux/io.h> instead of <asm/io.h>
   #1027: FILE: drivers/spi/spi_mpc8xxx.c:37:
   +#include <asm/io.h>

   ERROR: "foo * bar" should be "foo *bar"
   #1111: FILE: drivers/spi/spi_mpc8xxx.c:121:
   +static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)

   ERROR: "foo * bar" should be "foo *bar"
   #1116: FILE: drivers/spi/spi_mpc8xxx.c:126:
   +static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)

   ERROR: "foo * bar" should be "foo *bar"
   #1125: FILE: drivers/spi/spi_mpc8xxx.c:135:
   +       type * rx = mpc83xx_spi->rx;                                      \

   ERROR: "foo * bar" should be "foo *bar"
   #1135: FILE: drivers/spi/spi_mpc8xxx.c:145:
   +       const type * tx = mpc83xx_spi->tx;                      \

   WARNING: suspect code indent for conditional statements (16, 25)
   #1504: FILE: drivers/spi/spi_mpc8xxx.c:514:
   +               while (((event =
   [...]
   +                        cpu_relax();

Following warnings were left over, since fixing them will hurt the
readability.  We'd better fix them by lowering the indentation level by
splitting mpc83xx_spi_work function into two parts.

   WARNING: line over 80 characters
   #1371: FILE: drivers/spi/spi_mpc8xxx.c:381:
   +                                       status = mpc83xx_spi_setup_transfer(spi, t);

   WARNING: line over 80 characters
   #1392: FILE: drivers/spi/spi_mpc8xxx.c:402:
   +                               mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/86xx: add MMC SPI support for MPC8610HPCD boards

This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for
PIXIS' sdcsr bank that is used for managing SPI chip-select and for
reading card's states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: add small delay after asserting chip-select line

This is needed for some underlaying GPIO controllers that may be a bit
slow, or if chip-select signal need some time to stabilize.

For what it's worth, we already have the similar delay for chip-select
de-assertion case.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: quieten down the "Requested speed is too low" message

When a platform is running at high frequencies it's not always possible to
scale-down a frequency to a requested value, and using mmc_spi driver this
leads to the following printk flood during card polling:

  ...
  mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use
  520828 Hz instead.
  mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use
  520828 Hz instead.
  ...

Fix this by using WARN_ONCE(), it's better than the flood, and also better
than turning dev_err() into dev_dbg(), since we actually want to warn that
some things may not work correctly.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx: handle other Freescale processors

With this patch we'll able to select spi_mpc83xx driver on the MPC86xx
platforms.  Let the driver depend on FSL_SOC, so we don't have to worry
about Kconfig anymore.

Also remove the "experimental" dependency, the driver has been tested to
work on a various hardware, and surely not experimental anymore.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bootmem.c: avoid c90 declaration warning

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: driver for PrimeCell PL061 GPIO controller

This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral.  The
driver is implemented using the gpiolib framework.

This driver also includes support for the use of the PL061 as an interrupt
controller (secondary).

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Staging: comedi: fix build errors

Some of the comedi drivers need timer.h to build properly, so put it
in the comedidev.h file to fix these errors.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: udlfb: update to version 0.2.3

This updates the udlfb to the 0.2.3 version.

From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: udlfb: fix some sparse warnings.

There are others remaining due to the __iomem namespace of the
framebuffer data pointer.

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: udlfb: clean up checkpatch warnings in udlfb.c

This cleans up a bunch of checkpatch.pl warnings in the udlfb.c file.

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: udlfb: clean up checkpatch warnings in udlfb.h

This cleans up a bunch of checkpatch.pl warnings in the udlfb.h file.

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: udlfb: add udlfb driver to build

This adds the udlfb driver to the build system

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add udlfb driver

This adds the udlfb driver, a framebuffer driver for DisplayLink devices.

From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: remove pointless comments

These comments contribute nothing to the code, and most were just cut
and pasted from another driver.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: remove DRIVER macros

They are not needed, and the version one was pointless now that the code
is merged into the tree.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: remove dbgprintf macro

Use dev_dbg() instead.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: remove broken flag

The "in_module_init" flag was wrong, so just remove it, it's not needed.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: fix build warnings

struct ata_port_info shouldn't be const, so remove that which fixes up
the compiler warnings.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: use PCI_DEVICE

Use the PCI_DEVICE macro, that's what it is there for...

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: remove function prototypes

Move code around so we do not need the function prototypes anymore.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: coding style fixes

This fixes a number of coding style issues in the pata_rdc.h file

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: convert code to work in 2.6.29

This fixes build problems in the pata_rdc driver due to api changes in
the libata layer.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pata_rdc: add driver to the build system

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add pata_rdc driver

This is our IDE Source code. This is base on kernel 2.6.28.  pata_rdc.h
and pata_rdc.c

From: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: remove obsolete serqt_usb driver

Now that Bill rewrote the driver "properly", this old thing can be removed.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: serqt_usb2 add the driver to the build

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Add serqt_usb2, a rewrite of serqt_usb for the usb-serial layer

This is the serqt_usb driver rewritten to use usb-serial.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: asus_oled: fix build warnings

This fixes some build warnings in the asus_oled driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: slicoss: fix build warnings

This fixes some build warnings in the slicoss driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: slicoss: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: altpciechdma: fix build warnings

This fixes some build warnings in the altpciechdma driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: altpciechdma: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix the problem that file_ext->state should be protected by device_lock

While access file_ext->state, we should use device_lock to protect it. The
original codes miss this in some places.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: do not print error when heci_bh_handler is already on workqueue

schedule_work returns 0, if the work is already on the work_queue, else
returns non-zero. Do not print error message if heci_bh_handlerwork was
already on queue.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix setting h_is bit in h_csr register

Host software could issue interrupts to ME firmware, using H_IG bit. While
Setting H_IG bit, host software should preserve all the other bits in H_CSR
unchanged. In the original function which sets H_CSR register, they first read
the register, then set some bits, and write the whole 32bits back to the
register. And that the special behavior of H_IS (write-one-to-zero) causes problem.
This patch fixes the issue in the following ways:

 - Modify heci_set_csr_register() function so that it doesn't change H_IS bit.
 - Add interface heci_csr_clear_his() to clear H_IS bit. This function is called
   after H_IS checking (dev->host_hw_state & H_IS == H_IS).
 - In original heci_csr_disable_interrupts() function, it not only clears H_IE
   bit, sometimes it also clears H_IS bit. This patch separates the two parts.
 - Avoid calling write_heci_register() function to set H_CSR register directly,
   and instead using heci_set_csr_register() function

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix typos and add wait after disconnect

- Fix typo for enum HECI_WRITE.
 - Fix timeout issue. If the time period is greater or equal 15s, it's timeout.
 - Add 10ms wait time after disconnect, to ensure that hardware is ready.
   Otherwise in the next time connection, hardware resource may be busy.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix softirq safe to unsafe spinlock issue

When spinlock is nested, and the outside one is spin_lock_bh, the inner
spinlock should also be spin_lock_bh, otherwise it will bring softirq-safe
to softirq-unsafe lock conversion.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix spinlock order mess of device_lock and read_io_lock

In orginal code, the device_lock and read_io_lock is mess order when nested,
which may bring dead lock. This patch unify the spinlock order of device_lock
and read_io_lock. First acquire device_lock, then read_io_lock.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix wrong order of device_lock and file_lock

When the two locks are nested, the code should always first acquire file_lock,
and then acquire device_lock in order not to generate dead-lock race.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix userspace pointer mess

Fix userspace pointer mess.
 - In memcmp(), dest and src pointer should be both in kernel space.
 - Add (void __user *) modification before userspace pointer.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: copy_to/from_user related fixes

The patch does copy_to/from_user related fixes

*) __copy_from/to_user is enough for user space data buffer checked by access_ok.
*) return -EFAULT if __copy_from/to_user fails.
*) Do not use memcpy to copy from user space.

Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: Fix a bunch of warnings.

The patch fixes the following warnings.

drivers/staging/rspiusb/rspiusb.c: In function ‘pixel_data’:
drivers/staging/rspiusb/rspiusb.c:267: warning: passing argument 1 of ‘SetPageDirty’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘UnMapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:500: warning: passing argument 1 of ‘put_page’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘MapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:662: warning: assignment makes integer from pointer without a cast
drivers/staging/rspiusb/rspiusb.c:670: warning: assignment makes integer from pointer without a cast

Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: duplicate code in pixis_io

It seems that pixis_io and pixis_io2 should do the same thing.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb.c: break the huge piusb_ioctl function into several ones

This makes the code more readable, makes checkpatch really happy and factorize some code.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: clean rspiusb code

This first patch makes checkpatch happier

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: make driver compile

Convert undefined info() function calls to dev_err, making rspiusb compile

Signed-off-by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: p9auth: prevent some oopses and memory leaks

Before all testcases, do:
mknod /dev/caphash c 253 0
mknod /dev/capuse c 253 1

This patch does the following:

1. caphash write of > CAP_NODE_SIZE bytes overruns node_ptr->data
(test: cat /etc/mime.types > /dev/caphash)
2. make sure we don't dereference a NULL cap_devices[0].head
(test: cat serge@root@abab > /dev/capuse)
3. don't let strlen dereference a NULL target_user etc
(test: echo ab > /dev/capuse)
4. Don't leak a bunch of memory in cap_write().  Note that
   technically node_ptr is not needed for the capuse write case.
   As a result I have a much more extensive patch splitting up
   cap_write(), but I thought a smaller patch that is easier to test
   and verify would be a better start.  To test:
cnt=0
while [ 1 ]; do
echo /etc/mime.types > /dev/capuse
if [ $((cnt%25)) -eq 0 ]; then
head -2 /proc/meminfo
fi
cnt=$((cnt+1))
sleep 0.3
done
   Without this patch, it MemFree steadily drops.  With the patch,
   it does not.

I have *not* tested this driver (with or without these patches)
with factotum or anything - only using the tests described above.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: oslec bug fix

I have just had a bug fix submitted for Oslec which I have applied to
Oslec SVN. The bug can potentially stops the echo canceller adapting
after a few seconds, although it hasn't caused many problems in
practice.

Signed-off-by: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: b3dfg: clean up MODULE_PARM_DESC newline

Remove incorrect MODULE_PARM_DESC newline.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: wis-sony-tuner.c: fix &&/|| error

Fix &&/|| typo

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: Correct use of ! and &

Correct priority problem in the use of ! and &.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E; constant C; @@
- !E & C
+ !(E & C)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: fix build warnings

This fixes some build warnings in the rtl8192su driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add rtl8192SU wireless usb driver

Driver from Realtek for the Realtek RTL8192 USB wifi device

Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix build warnings

This fixes some build warnings in the cpc-usb driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix printk format warnings

Fix this warnings:
cpc-usb_drv.c:478: warning: format '%d' expects type 'int',
but argument 4 has type 'size_t'
cpc-usb_drv.c:1034: warning: format '%d' expects type 'int',
but argument 3 has type 'long unsigned int'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: depends on PROC_FS

Fix this build error when PROC_FS is not enabled:
cpc-usb_drv.c:61:2: error: #error "PROCFS needed"
cpc-usb_drv.c:1159: error: implicit declaration of function 'proc_mkdir'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: Adjust NULL test

Since card must already be non-NULL, it seems that what was intended
was to test the result of kmalloc.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E,E1;
identifier f,fld,fld1;
statement S1,S2;
@@

E->fld = f(...);
... when != E = E1
    when != E->fld1 = E1
if (
-   E
+   E->fld
           == NULL) S1 else S2
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: add TODO file

List what needs to be done to get this driver merged into
the main part of the kernel tree.

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix checkpatch warnings in sja2m16c.h

This fixes most of the coding style issues in sja2m16c.h

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix up checkpatch errors in cpc-usb_drv.c

This resolves the checkpatch errors in cpc-usb_drv.c

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: add driver to the build

This adds the cpc-usb driver to the kernel build

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix some build problems in the driver

It will now build properly on the latest kernel tree.

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add cpc-usb driver to the staging tree

This is a CPC CAN USB driver.

Just some comments:
cpcusb.h and cpc-usb_drv.c: Essential driver source code
sja2m16c_2.c: Helper for converting bitrate timings
cpc.h: Structures and definition needed to communicate with the device

From: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: epl: do not use CLONE_SIGHAND with allow_signal()

Not sure this patch is really needed since kernel_thread() is deprecated
(and checkpatch.pl complains).

But we should not use kernel_thread(CLONE_SIGHAND) if we are going to play
with signals.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: fix Kconfig issues

Wrap all ANDROID config items with a #if to keep from asking if you want
specific Android drivers even if you say N to CONFIG_ANDROID

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: binder: fix up some checkpatch warnings

This cleans up the majority of the checkpatch warnings in the android
binder driver.  All that is left now is a bunch of too-long-line stuff.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>