mesa: Improve gallium PACKAGECONFIG options

* rename llvmpipe to llvm to match configure option
* add MESA_LLVM_RELEASE to allow switching to 3.3 easier
* --enable-gallium isn't recognized option, split it to 2 more
  PACKAGECONFIGs for gbm and egl

(From OE-Core rev: 0b1e64a8d026a8021f4568758a637689e886037b)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

layer.conf: Bumping LAYERVERSION_core

Bumping LAYERVERSION_core to denote where meta-toolchain* is being
depreciated.

This goes back to my RFC:

http://comments.gmane.org/gmane.comp.handhelds.openembedded.core/39016

As we are removing meta-toolchain* and replacing it with bitbake
<imagename> -c populate_sdk this causes issues with those of us who
need to do automated builds both on the current development branch and
on prior development branches.

Example: For prior releases, I need to build meta-toolchain*. Without
having a simple way to figure out where this is no longer the case, I
(and other folks who run automated builds) end up having to jump
through a lot of hoops trying to figure out where this layer changed.

Utilizing LAYERVERSION_* to do it makes sense as there is a
significant change that would cause issues for build engineers.

(From OE-Core rev: 41053141cdc04fd6d8490b54b8b8dc59dc0fe93a)

Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qt-mobility: fix build in the absence of xvideo

QMake pro files don't explicitly define QT_NO_XVIDEO if the
configuration lacks xvideo, but plugins code relies on this define.

[YOCTO #4775]

(From OE-Core rev: 0d7b208d09e6511dbedfde60abd4bef9a0c596ee)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

babeltrace: Update to 1.1.1 based release

(From OE-Core rev: 973447e171086c3935e704ae41845697107d5cf3)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-ust: Update to 2.2.0 based release

(From OE-Core rev: d906713b7b59e926595e96fe54436015e0378317)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-modules: Update to 2.2.0 based release

(From OE-Core rev: 9436f568c23fa669f6db9c75c6e7d0a9f92f5a3a)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-tools: Update to 2.2.0 based release

(From OE-Core rev: b11db8fbb68188a00b10ba9c25a22426db642bde)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane.bbclass: Added QA warning for shipping /usr/share/info/dir

/usr/share/info/dir should be generated at install time in a postinst.
Added QA warning to check at build time for this file. The warning
is disabled by default.

[YOCTO #3969]

(From OE-Core rev: be93fa1d8fd601d95147980938217142c7d98c62)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroups: Update for split mc packages

(From OE-Core rev: 9c600ef0cbfd3cc5191363997c0408e11c251b19)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mc: Don't remove libdir and split helpers into packages

It contains helper programs that are needed to make mc do the right actions
for the various file formats it understands.

The helpers are perl, python and shell scripts, split them out so the core
mc does not try to pull in perl and python, it will still run without these
helpers.

[YOCTO #4432]

(From OE-Core rev: 6d0205576ef1e8a62c469b883dc0c962440469a7)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-modesetting: upgrade to 0.8.0

Removed patch integrated upstream.

(From OE-Core rev: 33c85b9463462897adbbd142bfcfa791342d3f46)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/insane: fix libdir check regexes

Ensure these do not pick up e.g. /lib/systemd/system/uuidd.socket, but
ensure we pickup e.g. /usr/lib/libnss3.so.1d (example from Debian). This
also fixes the broken exec_re regex (lib*.).

(From OE-Core rev: 391a361190d7da19ad3381121649a41a28516cb5)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mkelfimage: switch to git repository

The project has switched to using git for version control.

(From OE-Core rev: 8a9a476c03a3bc2782206799933d92e216032ff7)

Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

apr_cv_mutex_recursive=yes added to apr_1.4.6.bb to make rosnodes work

Working with the meta-ros project we detected that the ROS nodes didn't launch properly
the reason was that by default apr_cv_mutex_recursive in apr is set to no and this leads
to the APRENOTIMPL return value of apr_thread_mutex_create in thread_mutex.c when
APR_THREAD_MUTEX_NESTED is requested via flags.

Added CACHED_CONFIGUREVARS += "apr_cv_mutex_recursive=yes" to sources/openembedded-core/meta/recipes-support/apr/apr_1.4.6.bb
to fix this issue. It has also been removed the mention of this variable in
meta/site/powerpc32-linux.

(From OE-Core rev: 20b9151f877978c086dcc8cbae7e0d9c9e89a45d)

Signed-off-by: Víctor Mayoral Vilches <v.mayoralv@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

udev-extraconf: blacklist /dev/dm-*

Do not mount /dev/dm-* by default via udev, this is the default
behavior for most distos and WRLinux4.x.

This resolved a problem with the sanity test failing due to seeing
the error while attempting to mount new logical volumes without fs.

(From OE-Core rev: 9a6cf08afd81c95abf13e6cf5e43bb8cd777edd9)

Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

busybox: fix the on-target upgrade problem

We now can have a 'one-binary' version of busybox, or 'two-binary'
version of busybox, controlled by the 'BUSYBOX_SPLIT_SUID' variable.
This makes on-target upgrade a problem, as we have to support the
following four upgrading paths.

For convenience, in the following context, A is used to denote a
'two-binary' version of busybox while B is used to denote a 'one-binary'
version of busybox.

A --(upgrade)--> B
B --(upgrade)--> A
A --(upgrade)--> A
B --(upgrade)--> B

This patch makes effort to support the above four situations.

[YOCTO #4802]

(From OE-Core rev: 4e571e97750f3ac6a62cd0d2d10c08be98230630)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

init-ifupdown: set kernel parameters firstly

When do ipv6 ready test, some DAD (duplicate address detect) tests failed
since it expect IPV6 will be disabled, but not. even accept_dad has been
set to correct value 2. Further investigation shows the root cause is that
setting the kernel parameter happens after the NIC is upped.

Make kernel parameters be configured before the interfaces is upped, and
duplicate setting the kernel parameters does not have negative effect.

(From OE-Core rev: cabe22b9470e870e63b5ef1ec8349c67b0823abf)

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: save button from settings called a nonexisting method

The method was removed when the process for saving configuration
in Hob was changed. Replace the call with the right function.

[YOCTO #4793]
(Bitbake rev: b6aa2b63d71cbe82850a375381b2dbc750cf1905)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sysstat: backport a patch to fix a parallel building error

(From OE-Core rev: 3e1dbabbf33a2e461abc92ff10cd970fe604ee38)

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ghostscript: fix patch failure with some versions of patch

Some versions of patch (e.g. 2.6.1.136-31a7 on OpenSUSE 12.2) will
refuse to patch a file via a symlink (probably a fairly sensible
security precaution). The "base/" subdirectory specified within the
ghostscript-9.05-NOT-check-endian.patch file was being lost by the
default application with -p1, but this was not caught on most systems
due to the symlink. Fix the path so that we always patch the file
directly.

Fixes [YOCTO #4773].

(From OE-Core rev: 96a009da2456a03c65c198d8dca7d2af8b228f4f)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/package: print command output when commands fail

When external commands such as debugedit fail, it can be useful to see
their output, so use oe.utils.getstatusoutput() instead of
subprocess.call() to capture this and print it on failure.

(From OE-Core rev: 34179cc78b730ecb8ff3f4feb4beee2d17498ce3)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rpm: add wrapper for debugedit executable

This should fix sstate relocation issues with debugedit failing during
do_package on the Yocto Project autobuilder.

(From OE-Core rev: b7c2e01753e4a09388a3282e534bcbd163cd6ef7)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

security_flags: Add the compiler and linker flags that enhance security

These flags add addition checks at compile, link and runtime to prevent
stack smashing, checking for buffer overflows, and link at program start
to prevent call spoofing later.

This needs to be explicitly enabled by adding the following line to your
local.conf:

require conf/distro/include/security_flags.inc

[YOCTO #3868]

(From OE-Core rev: ff0e863f2d345c42393a14a193f76d699745a2b9)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qt4e.bbclass: export OE_QMAKE_QT_CONFIG

The class is inheriting qmake2.bbclass which exports OE_QMAKE_QT_CONFIG
pointing to the qt4 qconfig.pri when it should be pointing to the
qt4-embedded qconfig.pri.

(From OE-Core rev: ed78661e147780ceb1bc1e952b68740984d85971)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

udev: Add RRECOMMENDS for udev-cache to enable the cache

This will enable the udev cache for sysvinit systems, which does improve post-first
boots.

(From OE-Core rev: 087d8ccd6eaf2795253b5cbeac171ad82489535c)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-core-basic: remove hardcode udev

udev is brought in via packagegroup-core-boot

(From OE-Core rev: 580c555ef34f0abf07064990625122a13412ab0c)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

TmuxRunning: handle multi-word commands

Just as in f8ed7446755eeb88191e16749350efa1e7e6197c, tmux wants a single
argument for its command. This applies to the "split-window" command as
well as "new."

Note that this alone is not enough to fix the TmuxRunning devshell when
using pseudo because tmux does not preserve the environment that pseudo
requires.

(From OE-Core rev: 36fb9799d6a449d86acca3be354af56ad87c3151)

Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

terminal: Run command using a wrapper script

Some terminals may not pass the environment into the child process. This
is true when using "tmux split-window." If tmux is already running, it
will start the command with the tmux session environment, ignoring the
environment where the command was issued.

This could possibly be worked around when launching tmux by injecting
variables into the user's session environment or adding the variables to
the "update-environment" tmux setting. However, both methods would
permanently alter the user's session, which is undesirable.

By using a wrapper script, we have full control over the final
environment. Replace the env dictionary with an empty data smart that
will contain the exported variables and a wrapper function that execs
the original command.

(From OE-Core rev: 3bb96671e987ce8110ce98b9f6d9efc093f8d20e)

Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-modules: allow building without tracepoints enabled in kernel

Avoid a QA failure and instead produce a sensible warning message if no
modules were built.

Fixes [YOCTO #4791].

(From OE-Core rev: 3ef5b19cbd7a90e11fc61223737b0b8e0e60b1a3)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

webkit-gtk: add aarch64 support

Add patch from meta-linaro to compile webkit on aarch64.

(From OE-Core rev: 0edc61b9a38f93f06098b929662db6c3ce68670d)

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-native: add python-codecs-native to RPROVIDES

This is now required by python-argparse-native as of OE-Core revision
8d0e84bdfaf63ad61be7b015dd55dacccfa9132c.

(From OE-Core rev: e9e03d44d6a402fecdf0d62ff09a1f6af9da10bb)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman: Set the VPN client program paths

Automatically finding out the paths to VPN client programs does
not work when configure script is run so set the paths manually.

(From OE-Core rev: 6212703b826f4ba95196d9858a8fc033af623c7c)

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bison: Delete unused patch

(From OE-Core rev: 5917b04027f44e0c4425154dcc0563bbd681c1d8)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

uclibc: Remove 0.9.33 recipes

git recipes are stable enough and contains the fixes needed
to run with modern systems e.g. systemd etc. Drop 0.9.33
We already use git as default.

(From OE-Core rev: 05ae8f181e4e1699cf8e5d8bc20b3cbd4b532edf)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

uclibc: Update to latest git/master version

Use kernel cfg management infra to manage kconfig
fragments.

Add fragments for locale and obstrack and enable them
by default

Drop aplready applied patches

Drop DP = -1

(From OE-Core rev: 7bcf53ddb2e1a7171545f544ee2443b06d7c3359)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-firmware: fix ralink license file name

LICENCE not LICENSE and -firmware not _firmware. (Upstream seems totally
inconsistent with these filenames, unfortunately).

(From OE-Core rev: 1c6fd89967a949903a5ebffa9c4df7b5c06d32d1)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-firmware: be consistent with license package naming

Much as I prefer en_GB spelling, we need to be consistent with the other
package names in this recipe. Thanks to Trevor Woerner for pointing this
out.

(From OE-Core rev: f8e4e91de69d5e2f92a122a596d7241546034386)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oe/lsb.py: fall back to /etc/os-release for host distro ID

The new standard for host distribution identification [1] is
/etc/os-release, and a number of newer distributions provide this file,
so add support for this in order to pick up more distributions.
Additionally, handle "rolling release" style distributions that don't
report a version number, e.g. Arch Linux.

With this change we can identify the most common distributions, so this
should satisfy [YOCTO #4271]. Note that this doesn't imply support for
these distros as build hosts, just that we can identify them.

[1] http://www.freedesktop.org/software/systemd/man/os-release.html

(From OE-Core rev: bff50b747cde04007ead65dde4207b16a8e1bf08)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

base-files: remove the unnecessary /media/xxx directories

A few directories under /media were created by default, /media/card,
/media/ram, /media/realroot, etc.

These directories actually have no real usage now, thus removing them.

The /media/ram entry in the fstab is also removed, as mounting a tmpfs
over /media/ram in our system brings no benefit.

Note that a duplicate '/mnt' entry in dirs755 are also removed.

[Yocto #4774]

(From OE-Core rev: 458e76e470966d759067b2f6e6f00fa75a2963f3)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

udev-cache: take a read-only rootfs into consideration

In case of a read-only rootfs, we skip the process of generating
udev cache, as the data cannot be persisted between reboots.

However, it's possbile that the $DEVCACHE (default to /etc/dev.tar)
exists in a read-only rootfs, no matter how it's generated or installed.
In such situation, we try to use $DEVCACHE if possible.

Besides the basic changes in the logic of udev cache handling,
this patch also adds code to output more information if the udev
cache is not used and VERBOSE enabled.

This patch also changes the readfile function to readfiles function
so that it could handle more than one file at once.

(From OE-Core rev: 4ec1266e7e1aacdb9d3d0fc5cd6307b60df1731e)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

openssh: fix initscript restart command

start-stop-daemon should be called with '--oknodo' instead of
'-oknodo'.

(From OE-Core rev: 40f65a76b3291ae625c072a8efebbf134b15c367)

Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

seperatebuilddir: cogl and clutter build out of tree

(From OE-Core rev: bbbb5f3816a8851d4af713db304b45d9ecb9820d)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

clutter: fix out-of-tree builds

(From OE-Core rev: bb4adb38706b6a0d86a4be758b0219e6c23dd899)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gpgme: Updated from 1.4.1 to 1.4.2

(From OE-Core rev: 3cc3a95b86cb367574f7754bed655f27045cf5a7)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
License md5 was changed for src/gpgme.h.in:
"File: @configure_input@  */" was replaced by "Generated from gpgme.h.in for @GPGME_CONFIG_HOST@.  */"

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

apt: Updated from 0.9.8.1 to 0.9.8.2

(From OE-Core rev: 1500b4e7f6adec612efbdebad6a08a1efeeda7b6)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
[sgw - fixed apt-native checksums]

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxcb: Updated from 1.9 to 1.9.1

(From OE-Core rev: 74a803358eb95fda982bc5a2dcdee7461cc971be)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxfixes: Updated from 5.0 to 5.0.1

(From OE-Core rev: e1d5504b5f4233f6d775f9de43d9780da506850b)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxxf86vm: Updated from 1.1.2 to 1.1.3

(From OE-Core rev: 0d83eb41cc0c950d0177e2574d070f3f81580528)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxtst: Updated from 1.2.1 to 1.2.2

(From OE-Core rev: c2ee761799ea45da3699433cb94c3c2e6c0c5371)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
License md5 changed in 1.2.2, "Copyright © 1992 by UniSoft Group Ltd.",
"Copyright © 1992, 1994, 1995 X Consortium" and Copyright 1994 Network
Computing Devices, Inc. has been added

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxv: Updated from 1.0.7 to 1.0.8

(From OE-Core rev: 53ade6a40a093c3fb4a7d8eabf06adf9bec41f57)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxres: Updated from 1.0.6 to 1.0.7

(From OE-Core rev: 259d5829d343c5a9888d3b73a22e23f6a24b7411)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxau: Updated from 1.0.7 to 1.0.8

(From OE-Core rev: fb6d8bab9796404a3ddb4d990b8e906698940e1b)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxinerama: Updated from 1.1.2 to 1.1.3

(From OE-Core rev: 54b23798b86ed18f155b0e8054c846542af36ab5)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxcursor: Update from 1.1.13 to 1.1.14

(From OE-Core rev: 4b2581b7920387329a4c6971941537ffdceece86)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxext: Update from 1.3.1 to 1.3.2

(From OE-Core rev: d495f45717ea9f7767a8a4a9b1f83c19d56e4dc9)

Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Line "Copyright (c) 1999, 2005, 2006, Oracle and/or its affiliates. All rights reserved."
in COPYING was changed into "Copyright (c) 1999, 2005, 2006, 2013, Oracle and/or its affiliates. All rights reserved."
in 1.3.2

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-self-hosted: add python-git

python-git is needed by buildhistory-diff, so add it to this
packagegroup allowing buildhistory-diff to be used within
build-appliance-image.

(From OE-Core rev: 1f2d0f898e11bbb935d885920a1518336e19c3e7)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

buildtools-tarball: add python-git

python-git is needed by buildhistory-diff and the OE layer index update
script, and on machines where buildtools-tarball is necessary given we
are providing python we must provide this module as well.

Fixes [YOCTO #4747].

(From OE-Core rev: d9bf76b4fafc0ddcb19bf393e5e22678e49367b3)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-git: add recipe

This is used by buildhistory-diff and the OE layer index, and thus will
be useful in the context of the build appliance and buildtools-tarball.

(From OE-Core rev: 449ae5a70bc7d7d08f99de7d272b4cc3c83c3dcc)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-gitdb: add recipe

This is required by python-git.

(From OE-Core rev: bcbb34c26a235a103b46aa5c8ae7b3896904a215)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-smmap: add recipe

This is required by python-gitdb.

(From OE-Core rev: 37890014f406ca2ab24e0ec918af39613642afa0)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-async: add recipe

This is required by python-gitdb.

(From OE-Core rev: 31bc9fa8d53110a09ca048039d83213b34f4b7e4)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/insane: remove la2 check which no longer exists from ERROR_QA

This check was actually removed a very long time ago in
6656381714c5956f71ca634f5a5f4aa4661bbf7e, before we even changed the QA
checks to use names instead of numbers - the name was probably added
ERROR_QA mistakenly because it hadn't also been removed from the comment
listing the QA checks or the function that determined which ones were
errors.

(From OE-Core rev: ff65497cd9a96d5ab49b16ba1f7e30a216ff4a42)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Disable build qt related packagegroups on mips64 with 64 bits userspace

Because qt could not be built on mips64 with 64 bits userspace, set
COMPATIBLE_HOST for qt related packagegroups to disable them on mips64
with 64 bit userspace too.

(From OE-Core rev: 5f4c5de0b32d546ed28108d2403be41c685e27c7)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-multiprocessing: adding runtime dependencies

As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.

The observed behavior was:

When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:

Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
    from multiprocessing.util import SUBDEBUG, SUBWARNING
  File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
    import threading        # we want threading to install it's
ImportError: No module named threading

After adding python-threading as runtime dependency and rebuilding
the image, python reports:

Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
    import _multiprocessing
ImportError: No module named cPickle

(From OE-Core rev: e913412ca0ff01cb654757c8199e8859f15b7cf7)

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-argparse: adding runtime dependency on python-codecs

When typing 'import argparse' in the python shell on a minimal image
with only the python-argparse recipe installed, python reports:

Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import argparse;
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/usr/lib/python2.7/site-packages/argparse.py", line 91, in <module>
    from gettext import gettext as _
ImportError: No module named gettext

The python-argparse recipe requires the python gettext module,
which is currently provided by python-codecs.
Hence, this commit adds python-codecs as runtime dependency to
resolve the issue.

(From OE-Core rev: 8d0e84bdfaf63ad61be7b015dd55dacccfa9132c)

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

init-live.sh: try to make a union mount when possible

This patch tries to make a union mount in live image. For example,
if aufs is enabled with the aufs-enable.scc configuration fragment,
the init-live.sh script will use aufs to make a union mount.

Although overlayfs is not supported by Yocto kernel yet, this patch
still takes it into consideration with the expect that the related
code should at least serve as a placeholder.

[YOCTO #1487]
[YOCTO #4761]

(From OE-Core rev: 3cd6fedd815688b2f3fd97a56feb5f8696ebeace)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

initrdscripts: unionfs cleanup

The unionfs has been disabled for more than a year and it's not going
to be used any more.

This patch cleans up the unionfs related code.

[YOCTO #4761]
[YOCTO #1487]

(From OE-Core rev: ba5e437bc7335468a70ea293496f78e1a9d66287)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qt4*.bbclass: disable build qt on mips64 with 64 bits userspace

Qt/qt-embedded build fails on mips64 with 64 bits userspace. Set
COMPATIBLE_HOST in qt4e.bbclass and qt4x11.bbclass to disable build
qt/qt-embedded and packages which inherit these two classes on mips64
with 64 bits userspace.

(From OE-Core rev: 17890ebd637da0b3bf78804002d8b4f0ace078d2)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: cookerdata: Improve message if BBPATH is unset and bblayers.conf not found

If BBPATH isn't set and bblayers.conf isn't found, improve the message
shown to the user to help their understanding of what the problem might
be.

[YOCTO #3271]

(Bitbake rev: 0e639f5cbc813c8d4719019cfdd4287e9a429610)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A

packagedata: Show error when trying to change PE/PV/PR from runtime/pkgdata

PN/PE/PV/PR should never change between do_package and the following do_package_write_*
tasks. If any do change you would see build failure due to the wrong WORKDIR being
used for example.

This patch ensures that if something is going wrong we see the error earlier and
with some better warning about what the real problem is.

[YOCTO #4102 partial]

This is a rewritten version of a patch from Martin Jansa <martin.jansa@gmail.com>

(From OE-Core rev: f5252fea11e13dbcec1c277cf1bf0d7e61b60690)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package: Ensure we iterate all the pool objects

There is the possibility that if we don't iterate through the multiprocessing
pool objects we might not catch return codes and this could lead to hung/zombie
processes either temproarily or on a wider scale. Adding this certainly doesn't
hurt anything and is better practise so we might as well do it.

Its not 100% clear if this fixes some issues or not.

(From OE-Core rev: 89c8493d4d85044cd72af2756569d15e87cd5947)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcmode-default: Set GCC 4.8 as default

(From OE-Core rev: 7950a307bc7d4104e6cfb09bb2ea267c5da83f2a)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gcc-4.8: Fix ICE on ppc/spe targets

Rename patches to make them easly to apply with git

(From OE-Core rev: 040a55d0b730bf78aad0f51e0018faa88655e279)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity.bbclass: Check for the known broken version of make

See GNU Savannah bug 30612 -- make 3.82 is known to be broken.

A number of vendors are providing a modified version, so checking
for just the version string is not enough.  We also need to check
if the patch for the issue has been applied.  We use a modified
version of the reproduced to check for the issue.

(From OE-Core rev: dede532a980b0fabf0beae4519b89ec74a1c2474)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: Ensure that we mount devtmpfs

Since systemd also used tmpfs we should make a similar patch for
the systemd-udev script

Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632
Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan
is now using udev 182. This means /dev is now required to be a
devtmpfs filesystem (maintained by the kernel).    If the root
filesystem is a ramdisk,  the kernel's auto-mount of /dev doesn't
activate since there is no rootfs to actually mount...  The bug causes
an unusable system as /dev doesn't contain even basic nodes required
to even get a login prompt.

The Yocto  udev/init script mounts tmpfs if it does not detect tmpfs
or devtmpfs mounted at /dev.  This appears to be  outdated logic that
is no longer correct. I believe the Yocto udev init script should be
checking and mounting only 'devtmpfs' on dev.

(From OE-Core rev: d3616f31617830cac9375e8f4aa33e344ac554ed)

Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com>
[YOCTO #4632]

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

autotools.bbclass: force copy Makefile.in.in to ${S}/po/

If a Makefile.in.in has existed under ${S}/po/ and is read-only, cp will fail.

(From OE-Core rev: 6e1b17f19411ed897c53ae0ef41a2d2972a9c113)

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

useradd.bbclass: Add members to a group

useradd.bbclass supports adding new users and new groups. But it does not
support adding existing users to existing groups.

There is a need of adding users to some groups (e.g. audio). The class was
extended to call groupmems utility with arguments passed via GROUPMEMS_PARAM.

(From OE-Core rev: 6b3bd34bf8c5e511bccfbb64bdd1236e1e7576e3)

Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

shadow-native: Add --root option in groupmems

    Patch add_root_cmd_groupmems.patch that we apply to shadow-native
    allows program groupmems from the shadow utility package to chroot()
    so it can be used to modify etc/passwd and etc/group if they are
    located in a sysroot.

    The --root option in groupmems is needed for class useradd.

(From OE-Core rev: ae7aa0ef68372c15224c0c518cb90ba7350137b4)

Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

adt_installer_internal:add sudo when permission deny on installation directory

When the user doesn't have rights to access the installation directory,
the sdk installation will fail, add sudo to fix this.

[YOCTO #4760]

(From OE-Core rev: 040010d04672c93f18d60308ecf3c26a26ec5fd3)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

adt_installer_internal:fix perl lib version mismatch

When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.

This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.

[YOCTO #4758]

(From OE-Core rev: 487d1fa7b79e89518494986461c157bace842613)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

adt_installer_internal: fix perl modules relocated failed on older distributions

The perl module for automake has an embedded path in it, this needs
to be relocated.

Older versions of 'file' do not return the "ASCII" text in the output for
a perl module file. Hence, the regex pattern didn't match perl module and
they were not getting relocated at all on older distributions.

1) On CentOS release 6.4, the version of file is 5.04
$ file /usr/lib/perl5/Config_heavy.pl
$ /usr/lib/perl5/Config_heavy.pl: Perl5 module source text

2) On Ubuntu 13.04, the version of file is 5.11
$ file /usr/lib/perl/5.14/Config_heavy.pl
$ /usr/lib/perl/5.14/Config_heavy.pl: C source, ASCII text, with very long lines

[YOCTO #4550]

(From OE-Core rev: 7cfab2c895bf4daa7716fb7509e367bf74f016e4)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bzip2: Add ptest

The existing bzip2 tests in the upstream Makefile are copied to Makefile.am
(yocto's) and modified to adopt to the ptest format.

(From OE-Core rev: f02258b304dc4544567601a1502080f3581c00fa)

Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

groff: correct the install path of man.local

openvswitch build failed due to wrong install path of man.local which is
provided by groff.

Error log:
  /yocto/build/tmp/sysroots/x86_64-linux/usr/share/groff/1.22.2/tmac/an-old.tmac:690:
  warning: can't find macro file `man.local'

(From OE-Core rev: 5f2dd65e758ead8177a1cdda047bdb105b96e208)

Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image_types.bbclass: set 'filetype' ext4 feature

Generating filesystems with this flag allows more efficient directory
traversals because getdents() returns the filetype in 'd_type' which
allows to avoid an extra lstat() call.

Creating ext4 filesystems with 'mkfs.ext4' sets this flag by default
too.

(From OE-Core rev: 75e077025397f3bde84e60a9da2c0564ade09b39)

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lsbtest: sync test suite packages version

Update file packages_list after sync test suite packages version with
upstream.
Check date: Jun 25, 2013

(From OE-Core rev: 8695a11c927e9ee130b8c9ddf6441f3cb7164fc2)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

boost: Limit PARALLEL_MAKE by -j 64

* greater paralelism isn't supported by bjam and causes segfault or ignoring -j
* PARALLEL_MAKE was enabled for boost in
  http://git.openembedded.org/openembedded-core/commit/?id=9b9cfc1dfe5e3b8f89b7a8508537166d0f23935e

(From OE-Core rev: c212f306934aa1c7c825e3bb060d4799be1efca1)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto-dev: bump version to 3.10+

The linux-yocto-dev kernel is at 3.10-rcX, so we should bump the version to
reflect reality.

(From OE-Core rev: 8be4d1314a1334f5218e4eb46d3f8b734d5516f5)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.4: ltsi: sync to LTSI commit 5f05247ed

Updating the 3.4 branches to the latest LTSI baseline.

(From OE-Core rev: f53de5834559ed24b05f6bec8aaccdfc36f0a806)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.8: add USB screen configuration and net sched options

Bumping the meta branch SRCREV for the followiong commits:

 meta: enable additional NET_SCHED options

    This change turns on NET_ACT_MIRRED (packet redirecting and mirroring)
    and NET_CLS_U32 (universal 32bit comparisons w/ hashing classification).

Signed-off-by: Michael Barabanov <michael.barabanov@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
    meta: add BSP-specific touchscreen support

    Add touchscreen-composite support to machines based on common-pc and
    common-pc-64, along with several other Atom boards that don't inherit
    from those, thus providing those machines with the out-of-the-box
    ability to make use of the set of USB touchscreen devices supported by
    the composite USB driver.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
 meta: add usb/touchscreen-composite feature

    Add support for the 'composite' USB touchscreen driver.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
 meta: add features/input/touchscreen

    Add a feature enabling basic support for touchscreen input devices.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
(From OE-Core rev: 722f949f7defef62c4d258716cebc77c55edbbe2)

Signed-off-by: Michael Barabanov <michael.barabanov@windriver.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.4: allow kernel feature _appends to be overriden

Updating the linux-yocto 3.4 recipe's feature flags to match the 3.8
recipe, which has the following change:

    It was pointed out that the current way the KERNEL_FEATURES variable
    is appended in the base linux-yocto recipe doesn't allow the appended
    features to be prevented in a layer without using python code and
    a recipe finalize hook.

    To allow easier overriding of 'extra' or 'optional' features that are
    defined in the linux-yocto recipe, we create a KERNEL_EXTRA_FEATURES
    variable. This variable can be set in a layer to define extra features
    or cleared to prevent the recipe's extra features from being appended
    to the core functionality.

(From OE-Core rev: 3bd592e832c6ce10947882f37564c12f4fa7f8e2)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

udev: only use devtmpfs for udev

Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632
Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan
is now using udev 182. This means /dev is now required to be a
devtmpfs filesystem (maintained by the kernel).    If the root
filesystem is a ramdisk,  the kernel's auto-mount of /dev doesn't
activate since there is no rootfs to actually mount...  The bug causes
an unusable system as /dev doesn't contain even basic nodes required
to even get a login prompt.

The Yocto  udev/init script mounts tmpfs if it does not detect tmpfs
or devtmpfs mounted at /dev.  This appears to be  outdated logic that
is no longer correct. I believe the Yocto udev init script should be
checking and mounting only 'devtmpfs' on dev.

(From OE-Core rev: 31ab19ab69bc6504df01cac7ee0670ca78d247ab)

Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com>
[YOCTO #4632]

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

alsa-tools: Pass ACLOCAL_FLAGS so aclocal uses the right params

The compile step ends regenerating the configure scripts included in
the source subdirs, for it to properly work we need to pass the
ACLOCAL_FLAGS or the .m4 files won't be found.

,----[ Build error ]
| ./ac3dec
| aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
| configure.in:18: warning: macro 'AM_PATH_ALSA' not found in library
| automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
| configure.in:9: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
| configure.in:9: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
| automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
| test/Makefile.am:1: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
| configure.in:18: error: possibly undefined macro: AM_PATH_ALSA
|       If this token and others are legitimate, please use m4_pattern_allow.
|       See the Autoconf documentation.
| make: *** [all] Error 1
| ERROR: oe_runmake failed
`----

Reported-by: Rogerio Nunes <rogerio.nunes@freescale.com>
(From OE-Core rev: dde80e6fac83ca55644cb1b56cb55b2ba01c6564)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dbus-ptest: Install missing files

Install files from EXTRA_DIST needed for some tests.
Add configure parameter with-dbus-test-dir to specify where the test
tools are located.

(From OE-Core rev: 330d594af9f14faf0e5770b6056f4457a033fedd)

Signed-off-by: Adrian Dudau <adrian.dudau@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libx11: enable Xcms by default

The following do not work if Xcms is not enabled in libx11:
- starting xterm and doing ls --color / fails to color code the
  directories:
  xterm: Cannot allocate color "rgb:5c/5c/ff"
- xsetroot -solid rgb:5c/5c/ff fails with the following error:
  xsetroot:  unknown color "rgb:5c/5c/ff"
- xsetroot -solid rgbi:1.0/1.0/1.0 fails with the following error:
  xsetroot:  unknown color "rgbi:1.0/1.0/1.0"

More specifically, applications that pass Xcms color names to
XParseColor do not work properly.

[YOCTO #4576]

(From OE-Core rev: d860ee68208b84efb8049669ca18acc69f2f2d1b)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

init-live.sh: fix automount failed occasionally

Reboot system repeatedly, occasionally found usb automount failed, a
low probability but it happens.
$ df
Filesystem           1K-blocks      Used Available Use% Mounted on
none                   1024972         4   1024968   0% /dev
/dev/sda3              7689384   3540940   3757840  49% /media/sda3
/dev/sda2            146127424   1238432 137466120   1% /media/sda2
/dev/sda1                17845     14570      2354  86% /media/sda1
/dev/sdb                293400    288560      4840  98% /media/sdb
/dev/sdc4               457632        32    457600   0% /media/sdc4
/dev/sdc1               475018      2321    447749   1% /media/sdc1
/dev/sdd               1382298   1382298         0 100% /media/sdd
/dev/sdc2               475694      2320    448374   1% /media/sdc2
/dev/loop0              270649    181249     75644  71% /
df: /media/sdc3: No such file or directory
tmpfs                  1029352         0   1029352   0% /dev/shm
tmpfs                  1029352      2816   1026536   0% /run
tmpfs                  1029352         0   1029352   0% /sys/fs/cgroup
tmpfs                  1029352         4   1029348   0% /tmp
tmpfs                  1029352         0   1029352   0% /media/ram
tmpfs                  1029352       116   1029236   0% /var/volatile

When boot media has been found, udev will be killed. If udev is busy
to mount other medias at the killing time (especially medias is many),
the above issue will occur occasionally.

Invoke `udevadm settle' before killing udev will resolve this
issue, it watches the udev event queue, and exits if all current
events are handled.

Use variable `_UDEV_DAEMON' to replace hardcoded `udevd' to keep
consistent with previous.

[YOCTO #4745]

(From OE-Core rev: 2f209a7045a93e7e42f90418a42f464827b4a7f8)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity.bbclass: Fix COREBASE sanity tests

We need to expand the COREBASE variable, no idea how these tests were
previously working at all...

(From OE-Core rev: 099063f353a7a18720c92d87400726a49eed432f)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake: python funcname can not include special character @

[YOCTO #4772]

When path:file change to python function, it maybe include '@' character.
So, add the special character to change to '_' for avoid error.

(Bitbake rev: 684bc6dcb11ecb1fd7a4d25c08909ad9879e8342)

Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake: adding a new comment should be placed on a new line

In this case, the comment is appended to the end of the file.
Some text editors, do not place  a '\n' to the end of the file
after saving it.

[YOCTO #4636]
(Bitbake rev: 2beb9589b1bd9773f587b4dc08afdfe50f4ea913)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity.bbclass: Add check for @ character in build directory name

The @ character is not escaped properly in too many places within the system
to easily support it so add the character to the list of blacklisted characters.

Also tweak the other messages and ensure that all appropriate error messages
are disabled in one go.

[YOCTO #4772]

(From OE-Core rev: 008cb3c501c8313a0a1a0ebce2b0aa61239b548d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate_sdk_base, adt_installer: abort install if path contains spaces

Spaces are not handled properly in some parts of oe-core and it's safer
to abort toolchain installation if path contains spaces. Even though
we fix space handling in the toolchain installation script, there are
various other parts in the toolchain (perl scripts, sysroot path passed to
toolchain binaries, shebang lines) that would need special handling. So,
for now, just bail out if path contains spaces.

The checking for spaces in the path is done after expanding relative
paths to absolute and tilde conversion.

[YOCTO #4488]

(From OE-Core rev: 8c35ba2d3048ce69f74f72cb2676e4bc162cfb63)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>