Minkyu Kang [Fri, 16 Oct 2009 05:01:00 +0000 (14:01 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Minkyu Kang [Fri, 16 Oct 2009 02:15:54 +0000 (11:15 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Fri, 16 Oct 2009 02:15:16 +0000 (11:15 +0900)]
s5pc110: ipl: support 4096 byte ipl
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Jaehoon Chung [Thu, 15 Oct 2009 05:41:41 +0000 (14:41 +0900)]
Merge branch 'master' of jaehoon@party:/pub/git/u-boot-s5pc1xx
Jaehoon Chung [Thu, 15 Oct 2009 05:40:57 +0000 (14:40 +0900)]
s5pc110:aquila: modify usbdown button
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Minkyu Kang [Thu, 15 Oct 2009 04:50:53 +0000 (13:50 +0900)]
s5pc1xx: fix comile warnings
fix the following comile warnings
warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Wed, 14 Oct 2009 07:00:12 +0000 (16:00 +0900)]
s5pc110: aquila: Move MHL init from general init to usbdown
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 14 Oct 2009 02:44:32 +0000 (11:44 +0900)]
s5pc110: aquila: Apply HW revision 0.1
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 14 Oct 2009 02:33:29 +0000 (11:33 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Wed, 14 Oct 2009 02:33:26 +0000 (11:33 +0900)]
s5pc110: aquila: Fix HW revision detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Wed, 14 Oct 2009 02:31:43 +0000 (11:31 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Wed, 14 Oct 2009 02:30:54 +0000 (11:30 +0900)]
usbd: add support mmc download
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Joonyoung Shim [Wed, 14 Oct 2009 02:29:31 +0000 (11:29 +0900)]
s5pc110: aquila: Add CODEC_LDO_EN gpio set for limo_universal and j1_b2
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Kyungmin Park [Wed, 14 Oct 2009 01:15:17 +0000 (10:15 +0900)]
s5pc110: aquila: Fix wrong board detection since typo
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Dongsoo Kim [Wed, 14 Oct 2009 00:44:09 +0000 (09:44 +0900)]
Merge branch 'master' of kdsoo@party:/pub/git/u-boot-s5pc1xx
Conflicts:
board/samsung/universal/universal.c
Signed-off-by: Dongsoo Kim <dongsoo45.kim@samsung.com>
Dongsoo Kim [Wed, 14 Oct 2009 00:26:43 +0000 (09:26 +0900)]
SiI9234 MHL initialize setting revised
Signed-off-by: Dongsoo Kim <dongsoo45.kim@samsung.com>
Kyungmin Park [Wed, 14 Oct 2009 00:23:45 +0000 (09:23 +0900)]
s5pc110: Update External Power down modes
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 13 Oct 2009 08:35:09 +0000 (17:35 +0900)]
s5pc110: aquila: Don't clear wakeup source status register
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 13 Oct 2009 08:06:40 +0000 (17:06 +0900)]
5pc1xx: i2c-gpio: seperate the board specific features and move the code to SoC
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 13 Oct 2009 07:11:55 +0000 (16:11 +0900)]
s5pc110: aquila: Update powerdown modes
Reduce the from 31mA to 15mA
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 13 Oct 2009 05:16:37 +0000 (14:16 +0900)]
s5pc110: Update Powerdown modes registers
Reduce the about 5mA
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 13 Oct 2009 05:05:16 +0000 (14:05 +0900)]
s5pc1xx: gpio: use C structure and GPIO API functions
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 13 Oct 2009 05:04:02 +0000 (14:04 +0900)]
s5pc1xx: uart: fix the error checking logic
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 13 Oct 2009 04:54:17 +0000 (13:54 +0900)]
Revert "s5pc110: Update Powerdown modes registers"
This reverts commit
37e89a9972213767dfab5c677ff190af63eec310.
Kyungmin Park [Tue, 13 Oct 2009 01:34:40 +0000 (10:34 +0900)]
s5pc110: aquila: Don't need to set offset
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 13 Oct 2009 01:06:34 +0000 (10:06 +0900)]
s5pc110: Update Powerdown modes registers
Reduce the about 5mA
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 10:36:13 +0000 (19:36 +0900)]
s5pc1xx: modem: set correct help message
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 10:27:21 +0000 (19:27 +0900)]
s5pc1xx: uart: use the lowercase and codes clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 10:21:54 +0000 (19:21 +0900)]
s5pc1xx: Makefile: build fix
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 10:21:22 +0000 (19:21 +0900)]
s5pc1xx: onenand: use C structure and codes clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 10:00:29 +0000 (19:00 +0900)]
s5pc1xx: Makefile: codes clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 09:53:55 +0000 (18:53 +0900)]
s5pc1xx: clock: use C structure and codes clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 09:35:55 +0000 (18:35 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Mon, 12 Oct 2009 08:16:52 +0000 (17:16 +0900)]
s5pc110: aquila: Add Memory Power down modes
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 07:26:14 +0000 (16:26 +0900)]
s5pc1xx: timer: use the lowercase
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 12 Oct 2009 07:24:42 +0000 (16:24 +0900)]
s5pc1xx: cpu: codes clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Joonyoung Shim [Sat, 10 Oct 2009 04:55:44 +0000 (13:55 +0900)]
s5pc1xx: remove TZPC init
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Kyungmin Park [Fri, 9 Oct 2009 08:52:26 +0000 (17:52 +0900)]
s5pc110: Detect Limo Real at suspend by H1 group
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 9 Oct 2009 08:30:25 +0000 (17:30 +0900)]
s5pc110: Fix Limo Real detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 9 Oct 2009 08:30:12 +0000 (17:30 +0900)]
s5pc110: aquila: Setup power down status
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 9 Oct 2009 04:27:10 +0000 (13:27 +0900)]
s5pc110: aquila: Fix Limo Real board detection after suspend
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 8 Oct 2009 23:41:23 +0000 (08:41 +0900)]
s5pc110: aquila: Remove unnecessary check
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 8 Oct 2009 11:27:28 +0000 (20:27 +0900)]
s5pc110: aqulia: set AP_PS_HOLD high
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 8 Oct 2009 10:19:12 +0000 (19:19 +0900)]
s5pc110: use gpio style operation
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 8 Oct 2009 07:06:56 +0000 (16:06 +0900)]
s5pc110: Set high AP_PS_HOLD pin
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 8 Oct 2009 02:28:28 +0000 (11:28 +0900)]
s5pc110: aquila: Fix wrong display debug message
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 8 Oct 2009 02:20:31 +0000 (11:20 +0900)]
s5pc110: aquila: Register based sleep & PMIC LDO command support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 7 Oct 2009 02:12:36 +0000 (11:12 +0900)]
s5pc110: sleep command support to test sleep
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 7 Oct 2009 00:47:18 +0000 (09:47 +0900)]
s5pc110: universal: Delete unnecessary 2k & 4k IPL binary
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Wed, 7 Oct 2009 00:33:38 +0000 (09:33 +0900)]
s5pc1xx: universal: use the correct name
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 6 Oct 2009 12:17:05 +0000 (21:17 +0900)]
s5pc110: mmc: code clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 6 Oct 2009 12:11:43 +0000 (21:11 +0900)]
s5pc110: support the SD/MMC Controller
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 6 Oct 2009 10:37:37 +0000 (19:37 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Conflicts:
Makefile
onenand_ipl/onenand_ipl.h
onenand_ipl/onenand_read.c
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 6 Oct 2009 10:32:12 +0000 (19:32 +0900)]
s5pc110: Remove non-exist powerdown setting at Group H
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 6 Oct 2009 08:08:50 +0000 (17:08 +0900)]
s5pc110: aquila: Disable H group powerdown modes
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Jaehoon Chung [Tue, 6 Oct 2009 07:54:00 +0000 (16:54 +0900)]
s5pc110: aquila: set usbdown button (volumedown & camera)
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Ben Warren [Mon, 5 Oct 2009 07:02:51 +0000 (00:02 -0700)]
Add information about return values of xxx_eth_register() in documentation
As discussed on mailing list, <0 indicates failure, >=0 indicates number
of interfaces found.
Also added blurb about private data
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Wed, 9 Sep 2009 18:41:22 +0000 (14:41 -0400)]
document network driver framework
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Prafulla Wadaskar [Wed, 9 Sep 2009 10:29:19 +0000 (15:59 +0530)]
net: kirkwood_egiga.c: fixed build warning
if link up detection code is disabled through config option, it gives build warning.
This patch fixes the same
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Mon, 5 Oct 2009 05:37:03 +0000 (22:37 -0700)]
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
All in-tree boards that use this controller have CONFIG_NET_MULTI
added
Also:
- changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111
- cleaned up line lengths
- modified all boards that override weak function in this driver
- modified all eeprom standalone apps to work with new driver
- updated blackfin standalone EEPROM app after testing
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Prafulla Wadaskar [Mon, 21 Sep 2009 14:58:18 +0000 (20:28 +0530)]
net: phy: mv88e61xx.c : fixed build warning
following build warning was observed
mv88e61xx.c: In function ‘mv88e61xx_busychk’:
mv88e61xx.c:208: warning: dereferencing type-punned pointer will break strict-aliasing rules
This patch fixes the same
Patch tested for rd6281a board build
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
James Clough [Thu, 10 Sep 2009 07:11:50 +0000 (09:11 +0200)]
net: Fix problem with 405EZ ethernet interrupt
On 405EZ the RX-/TX-interrupts are coalesced into one IRQ bit in the
UIC. We need to acknowledge the RX-/TX-interrupts in the
SDR0_ICINTSTAT reg as well.
This problem was introduced with commit
d1631fe1 [ppc4xx: Consolidate PPC4xx UIC defines]
Signed-off-by: James Clough <james@rtetc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Wed, 2 Sep 2009 08:18:55 +0000 (04:18 -0400)]
net: add random_port() prototype
The random_port() is meant to be used by other net code, but without a
prototype, we get fun warnings like:
dns.c: In function 'DnsSend':
dns.c:89: warning: implicit declaration of function 'random_port'
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Tom Rix [Sun, 4 Oct 2009 21:57:09 +0000 (16:57 -0500)]
Merge branch 't-next-marvell' into t-next-at91
Daniel Gorsulowski [Tue, 29 Sep 2009 06:03:12 +0000 (08:03 +0200)]
at91: Update MEESC board support
This patch implements several updates:
-disable CONFIG_ENV_OVERWRITE
-add new hardware style variants and set the arch numbers appropriate
-pass the serial# and hardware revision to the kernel
-removed unused macros from include/configs/meesc.h
-fixed multiline comment style
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Simon Kagstrom [Thu, 1 Oct 2009 14:11:50 +0000 (19:41 +0530)]
arm: Correct build with CONFIG_SYS_HUSH_PARSER set
FLAG_PARSE_SEMICOLON is not defined without hush.h, so include that.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Olof Johansson [Tue, 29 Sep 2009 14:22:45 +0000 (10:22 -0400)]
TI: OMAP3: Overo Tobi ethernet support
Add setup for ethernet on Tobi, allowing kernel/ramdisk to be loaded
over tftp.
This also refactors the smc911x driver to allow for detecting when the
chip is missing. I.e. the detect_chip() function is called earlier and
will abort gracefully when the Chip ID read returns all 1's.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Olof Johansson [Tue, 29 Sep 2009 14:21:29 +0000 (10:21 -0400)]
SMC911X: Add chip auto detection
Refactor the smc911x driver to allow for detecting when the chip is missing.
I.e. the detect_chip() function is called earlier and will abort gracefully
when the Chip ID read returns all 1's.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Tom Rix [Tue, 29 Sep 2009 14:19:49 +0000 (10:19 -0400)]
TI OMAP3 Use arm init sequence to initialize i2c
This changes fixes an early i2c error.
It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.
While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.
Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.
Run tested on Beagle.
Compile tested on the omap3's
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Sandeep Paulraj [Tue, 29 Sep 2009 13:43:04 +0000 (09:43 -0400)]
TI: DaVinci DM365: Enabling network Support on DM365 EVM
This patch enables EMAC on the DM365 EVM.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
Sandeep Paulraj [Tue, 29 Sep 2009 14:02:38 +0000 (10:02 -0400)]
TI: DaVinci: GPIO header file and definitions
Some DaVinci SOC's use GPIOs to enable EMAC and DM9000.
This patch adds some definitions for GPIO registers and also adds
structures for GPIO.
A separate header file is being added so that in future we
can have a DaVinci GPIO driver similer to OMAP.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
Sandeep Paulraj [Fri, 18 Sep 2009 21:30:05 +0000 (17:30 -0400)]
TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
In the DaVinci specific code, we use both CONFIG_SOC_DM646X and
CONFIG_SOC_DM646x to represent DM646x specific code.
This patch changes occurrences of CONFIG_SOC_DM646x to
CONFIG_SOC_DM646X. This is because for DM644x series of SOCs we use
the flag CONFIG_SOC_DM644X. We want some uniformity.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
Olof Johansson [Mon, 28 Sep 2009 12:19:30 +0000 (08:19 -0400)]
OMAP3: Clean up whitespace in mux configs
Switch from space-based indentation to tab-based in mux configs, as pointed
out by WD at:
http://lists.denx.de/pipermail/u-boot/2009-September/061241.html
Nothing but whitespace changes in this patch (diff -w gives no output).
Signed-off-by: Olof Johansson <olof@lixom.net>
Dirk Behme [Mon, 28 Sep 2009 12:17:50 +0000 (08:17 -0400)]
OMAP3 MMC: Fix warning dereferencing type-punned pointer
Fix warning
Dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
CC: Steve Sakoman <sakoman@gmail.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
Tom Rix [Sun, 4 Oct 2009 10:40:07 +0000 (05:40 -0500)]
Merge branch 'arm/master' into arm/next
Conflicts:
board/AtmarkTechno/suzaku/Makefile
board/amcc/acadia/acadia.c
board/amcc/katmai/katmai.c
board/amcc/luan/luan.c
board/amcc/ocotea/ocotea.c
board/cm-bf537u/Makefile
board/cray/L1/L1.c
board/csb272/csb272.c
board/csb472/csb472.c
board/eric/eric.c
board/eric/init.S
board/eukrea/cpuat91/Makefile
board/exbitgen/exbitgen.c
board/exbitgen/init.S
board/freescale/mpc8536ds/config.mk
board/g2000/g2000.c
board/jse/sdram.c
board/mpl/mip405/mip405.c
board/mpl/pip405/pip405.c
board/netstal/hcu5/hcu5.c
board/netstal/mcu25/mcu25.c
board/sc3/sc3.c
board/w7o/init.S
board/w7o/w7o.c
common/cmd_reginfo.c
cpu/ppc4xx/40x_spd_sdram.c
cpu/ppc4xx/44x_spd_ddr.c
doc/README.sbc8548
drivers/misc/fsl_law.c
fs/ubifs/ubifs.c
include/asm-ppc/immap_85xx.h
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Wolfgang Denk [Sat, 3 Oct 2009 21:40:35 +0000 (23:40 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Sat, 3 Oct 2009 21:38:55 +0000 (23:38 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Simon Kagstrom [Mon, 21 Sep 2009 22:31:01 +0000 (04:01 +0530)]
Support for the OpenRD base board
The implementation is borrowed from the sheevaplug board and the Marvell
1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Prafulla Wadaskar [Mon, 21 Sep 2009 14:45:17 +0000 (20:15 +0530)]
Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
This patch adds kwbimage configuration file
(used by mkimage utility)
to support u-boot.kwb target on mv88f6281gtw_ge board.
To create Kirkwood boot image to be flashed on SPI Flash,
additional parameter u-boot.kwb need to be passed during make.
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Prafulla Wadaskar [Mon, 21 Sep 2009 12:53:11 +0000 (18:23 +0530)]
Kirkwood: rd6281a: Add kwbimage build support
This patch adds kwbimage configuration file
(used by mkimage utility)
to support u-boot.kwb target on rd6281a platform.
To create Kirkwood boot image to be flashed on NAND,
additional parameter u-boot.kwb need to be passed during make.
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Tom Rix [Sun, 27 Sep 2009 16:10:09 +0000 (11:10 -0500)]
Add support for Eukrea CPU9260/CPU9G20 SBC
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Tom Rix [Sun, 27 Sep 2009 12:47:24 +0000 (07:47 -0500)]
Add support for Eukrea CPUAT91 SBC
CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
mode.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Wolfgang Denk [Fri, 25 Sep 2009 12:16:00 +0000 (14:16 +0200)]
mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Wed, 23 Sep 2009 05:56:08 +0000 (07:56 +0200)]
mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
U-Boot can detect if an IDE device is present or not.
If not, and this new config option is activated, U-Boot
removes the ATA node from the DTS before booting Linux,
so the Linux IDE driver does not probe the device and
crash. This is needed for buggy hardware (uc101) where
no pull down resistor is connected to the signal IDE5V_DD7.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Wed, 23 Sep 2009 05:56:04 +0000 (07:56 +0200)]
mpc5200, mucmc52, uc101: config cleanup
- As these boards are similiar, collect common config options
in manroland/common.h and manroland/mpc52xx-common.h
for mpc5200 specific common options for this manufacturer.
- add OF support
- update default environment
Signed-off-by: Heiko Schocher <hs@denx.de>
Minor edit of commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 24 Sep 2009 22:57:49 +0000 (00:57 +0200)]
Fix "ppc/85xx: Clean up use of LAWAR defines" breakage
Commit
002741ae86 modified include/asm-ppc/mmu.h such that the LAWAR_
defines were only enabled for the 83xx platform, but they are also
needed on MPC512x system. Enabling these for E300 systems seems thus
more appropriate.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Martha M Stan [Mon, 21 Sep 2009 18:08:00 +0000 (14:08 -0400)]
Add Elpida Memory Configuration to mpc5121ads Boards
Signed-off-by: Martha M Stan <mmarx@silicontkx.com>
Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Martha M Stan [Mon, 21 Sep 2009 18:07:14 +0000 (14:07 -0400)]
mpc512x: Streamlined fixed_sdram() init sequence.
Signed-off-by: Martha M Stan <mmarx@silicontkx.com>
Minor cleanup:
Re-ordered default_mddrc_config[] to have matching indices.
This allows to use the same index "N" for source and target fields;
before, we had code like this
out_be32(&im->mddrc.ddr_time_config2, mddrc_config[3]);
which always looked like a copy & paste error because 2 != 3.
Also, use NULL when meaning a null pointer.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Kumar Gala [Thu, 19 Mar 2009 07:46:19 +0000 (02:46 -0500)]
ppc/p4080: Determine various chip frequencies on CoreNet platforms
The means to determine the core, bus, and DDR frequencies are completely
new on CoreNet style platforms. Additionally on p4080 we can have
different frequencies for FMAN and PME IP blocks. We need to keep track
of the FMAN & PME frequencies since they are used for time stamping
capabilities inside each block.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Sep 2009 06:52:37 +0000 (01:52 -0500)]
ppc/p4080: Handle timebase enabling and frequency reporting
On CoreNet style platforms the timebase frequency is the bus frequency
defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms
the core not longer controls the enabling of the timebase. We now need
to enable the boot core's timebase via CCSR register writes.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 19 Mar 2009 07:39:17 +0000 (02:39 -0500)]
ppc/p4080: Add various p4080 related defines (and p4040)
There are various locations that we have chip specific info:
* Makefile for which ddr code to build
* Added p4080 & p4040 to cpu_type_list and SVR list
* Added number of LAWs for p4080
* Set CONFIG_MAX_CPUS to 8 for p4080
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Sep 2009 06:44:39 +0000 (01:44 -0500)]
ppc/p4080: CoreNet platfrom style secondary core release
The CoreNet platform style of bringing secondary cores out of reset is
a bit different that the PQ3 style. Mostly the registers that we use
to setup boot translation, enable time bases, and boot release the cores
have moved around.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Sep 2009 06:44:00 +0000 (01:44 -0500)]
ppc/p4080: CoreNet platfrom style CCSRBAR setting
On CoreNet based platforms the CCSRBAR address is split between an high &
low register and we no longer shift the address.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Kumar Gala [Thu, 19 Mar 2009 07:32:23 +0000 (02:32 -0500)]
ppc/p4080: Add support for CoreNet style platform LAWs
On CoreNet based platforms the LAW address is split between an high &
low register and we no longer shift the address. Also, the target IDs
on CoreNet platforms have been completely re-assigned.
Additionally, added a new find_law() API to which LAW an address hits in.
This is need for the CoreNet style boot release code since it will need
to determine what the target ID should be set to for boot window
translation.
Finally, enamed LAWAR_EN to LAW_EN and moved to header so we can use
it elsewhere.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Sep 2009 14:43:12 +0000 (09:43 -0500)]
ppc/p4080: Add p4080 platform immap definitions
The p4080 SoC has a significant amount of commonality with the 85xx/PQ3
platform. We reuse the 85xx immap and just add new definitions for
local access and global utils. The global utils is now broken into
global utils, clocking and run control/power management.
The offsets from CCSR for a number of blocks have also changed. We
introduce the CONFIG_FSL_CORENET define to distinquish the PQ3 style of
platform from the new p4080 platform. We don't use QoirQ as there are
products (like p2020) that are PQ3 based platforms but have the QoirQ
name.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 22 Sep 2009 20:45:44 +0000 (15:45 -0500)]
ppc/85xx: Fix enabling of L2 cache
We need to flash invalidate the locks in addition to the cache
before we enable.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Vivek Mahajan [Tue, 22 Sep 2009 07:18:27 +0000 (12:48 +0530)]
85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ
The code assumed names where just numbers and always prefixed 'mpc'.
However newer QorIQ don't follow the mpc naming scheme.
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Mingkai Hu [Tue, 22 Sep 2009 06:53:21 +0000 (14:53 +0800)]
ppc/85xx: add cpu init config file for boot from NAND
When boot from NAND, the NAND flash must be connected to br/or0.
Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to
it.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Mingkai Hu [Tue, 22 Sep 2009 06:53:34 +0000 (14:53 +0800)]
immap_85xx: add porpllsr's plat ratio definition
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Mingkai Hu [Tue, 22 Sep 2009 06:53:10 +0000 (14:53 +0800)]
ppc/85xx: add ld script file for boot from NAND
The first stage 4K image uses a seperate ld script file to
generate 4K image. This patch moves it to the cpu/mpc85xx/*
to make it avaliable for 85xx platform.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
projects / kernel / u-boot.git / log