Merge tag 'phy-fixes-6.2' into next

Merge fixes tag pulled into mainline by Linus into phy/next due to
dependency on amlogic patches

phy: rockchip-typec: fix tcphy_get_mode error case

The existing logic in tcphy_get_mode() can cause the phy to be
incorrectly configured to USB UFP or DisplayPort mode when
extcon_get_state returns an error code.

extcon_get_state() can return 0, 1, or a negative error code.

It is possible to get into the failing state with an extcon driver
which does not support the extcon connector id specified as the
second argument to extcon_get_state().

tcphy_get_mode()
->extcon_get_state()
-->find_cable_index_by_id()
--->return -EINVAL;

Fixes: e96be45cb84e ("phy: Add USB Type-C PHY driver for rk3399")
Signed-off-by: Neill Kapron <nkapron@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom: snps-eusb2: Add missing headers

The driver was missing to include couple of headers explictly which
causes build to fail on other archs

drivers/phy/qualcomm/phy-qcom-snps-eusb2.c: In function 'qcom_snps_eusb2_hsphy_write_mask':
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:147:15: error: implicit declaration of function 'readl_relaxed' [-Werror=implicit-function-declaration]
  147 |         reg = readl_relaxed(base + offset);
      |               ^~~~~~~~~~~~~
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:150:9: error: implicit declaration of function 'writel_relaxed' [-Werror=implicit-function-declaration]
  150 |         writel_relaxed(reg, base + offset);
      |         ^~~~~~~~~~~~~~
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c: In function 'qcom_eusb2_default_parameters':
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:161:42: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
  161 |                                          FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0));
      |                                          ^~~~~~~~~~

Fix this by adding bitfield.h and iopoll.h explictly

Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: Add support for SM8550

Add SM8550 specific register layout and table configs.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-7-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Add v6 DP register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6.
Add the new DP specific offsets in the generic qmp header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: pcs-usb: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB.
Add the new PCS USB specific offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible

Add the SM8550 compatible to the list.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom: Add QCOM SNPS eUSB2 driver

The SM8550 SoC uses Synopsis eUSB2 PHY for USB 2.0.
Add a new driver for it.

The driver is based on a downstream implementation.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: Add qcom,snps-eusb2-phy schema file

The SM8550 SoC uses Synopsis eUSB2 PHY. Add a dt-binding schema
for the new driver.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs

Add the SM8550 both g4 and g3 configurations. In addition, there is a
new "lane shared" table that needs to be configured for g4, along with
the No-CSR list of resets. The no-CSR allows resetting the PHY without
actually dropping the PHY configuration. The no-CSR needs to be
deasserted only after the PHY has been configured and the PLL has
stabilized.

Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-9-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-8-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-7-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: pcs-pcie: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: pcs: Add v6.20 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: pcs: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550

Document the QMP PCIe PHY compatible for SM8550.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom: com-qmp-combo: add SM8350 & SM8450 support

Copy the USB tables from the QMP USB3 PHY driver and add the
missing DP tables from downstream to enable USB3/DP on
the SM8350 and SM8450 platforms.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8350-upstream-usb-dp-combo-phy-v1-2-ed849ae6b849@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,qmp-usb3-dp: document sm8350 & sm8450 compatible

Document the USB3/DP Combo PHY compatible found on the SM8350 & SM8450 SoCs.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8350-upstream-usb-dp-combo-phy-v1-1-ed849ae6b849@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers

Introduce a config option for each QMP PHY driver now that the QMP PHY
mega-driver has been split up into different modules. This allows kernel
configurators to limit the binary size of the kernel by only compiling
in the QMP PHY driver that they need.

Leave the old config QCOM_QMP in place and make it into a menuconfig so
that 'make olddefconfig' continues to work. Furthermore, set the default
of the new Kconfig symbols to be QCOM_QMP so that the transition is
smooth.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230202215330.2152726-1-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: tegra-xusb: Add support for Tegra234

Add the compatible string for the Tegra234 XUSB PHY.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230111110450.24617-3-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Merge tag 'phy-devm_of_phy_optional_get' into next

Merge tag phy-devm_of_phy_optional_get into next to bring in the new
devm_of_phy_optional_get() API and users

usb: host: ohci-exynos: Convert to devm_of_phy_optional_get()

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.

As devm_of_phy_optional_get() returns NULL if either the PHY cannot be
found, or if support for the PHY framework is not enabled, it is no
longer needed to check for -ENODEV or -ENOSYS.

This lets us drop several checks for IS_ERR(), as phy_power_{on,off}()
handle NULL parameters fine.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/3adc5dd1149a17ea7daf4463549feab886c6b145.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

usb: host: ehci-exynos: Convert to devm_of_phy_optional_get()

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.

As devm_of_phy_optional_get() returns NULL if either the PHY cannot be
found, or if support for the PHY framework is not enabled, it is no
longer needed to check for -ENODEV or -ENOSYS.

This lets us drop several checks for IS_ERR(), as phy_power_{on,off}()
handle NULL parameters fine.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/a28baf4e07e464c43aff9e52263b5a902f5da9a0.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

PCI: tegra: Convert to devm_of_phy_optional_get()

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/56508eeadf7fa8692877e872871f10294d48c49d.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

net: lan966x: Convert to devm_of_phy_optional_get()

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/993b0f4ac5b84b2b72223011614d2e821f9e7302.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

net: fman: memac: Convert to devm_of_phy_optional_get()

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.

As devm_of_phy_optional_get() returns NULL if either the PHY cannot be
found, or if support for the PHY framework is not enabled, it is no
longer needed to check for -ENODEV or -ENOSYS.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/f2d801cd73cca36a7162819289480d7fc91fcc7e.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: Add devm_of_phy_optional_get() helper

Add an optional variant of devm_of_phy_get() that also takes care of
printing real errors, so drivers no longer have to open-code this
operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

doc: phy: Document devm_of_phy_get()

Add the missing documentation for devm_of_phy_get(), which was forgotten
when the function was introduced.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/768d5845668f081620098a0b4479d1481e212bac.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: Remove unused phy_optional_get()

There were never any upstream users of this function since its
introduction almost 10 years ago.

Besides, the dummy for phy_optional_get() should have returned NULL
instead of an error code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/df61992b1d66bccf4e6e1eafae94a7f7d7629f34.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: Add config for SM6350

Add the tables and config for the combo phy found on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230120-sm6350-usbphy-v4-2-4d700a90ba16@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

Add the compatible describing the combo phy found on SM6350.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230120-sm6350-usbphy-v4-1-4d700a90ba16@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: mediatek: remove temporary variable @mask_

Remove the temporary @mask_, this may cause build warning when use clang
compiler for powerpc, but can't reproduce it when compile for arm64.
the build warning is caused by:

"warning: result of comparison of constant 18446744073709551615 with
expression of type (aka 'unsigned long') is always false
[-Wtautological-constant-out-of-range-compare]"

More information provided in below lore link.

After removing @mask_, there is a "CHECK:MACRO_ARG_REUSE" when run
checkpatch.pl, but due to @mask is constant, no reuse problem will happen.

Link: https://lore.kernel.org/lkml/202212160357.jJuesD8n-lkp@intel.com/t/
Fixes: 84513eccd678 ("phy: mediatek: fix build warning of FIELD_PREP()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118084343.26913-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add SM8550 support

Add SM8550 specific register layout and table configs.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-7-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: pcs-ufs: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS UFS specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: qserdes-txrx-ufs: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes TX RX but UFS specific offsets
in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: qserdes-txrx: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes TX RX offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: qserdes-com: Add v6 register offsets

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes com offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: Add QMP UFS PHY comptible for SM8550

Document the QMP UFS PHY compatible for SM8550.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: phy-can-transceiver: Add support for NXP TJR1443

The NXP TJR1443 High-speed CAN transceiver with Sleep mode is a
pin-compatible alternative for the TI TCAN1043.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/0bfa1e4c43632e49c9512b4e7daa970545545dcf.1674037830.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: ti,tcan104x-can: Document NXP TJR1443

The NXP TJR1443 High-speed CAN transceiver with Sleep mode is a
pin-compatible alternative for the TI TCAN1043.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/6ee5e2ce00019bd3f77d6a702b38bab1a45f3bb0.1674037830.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: phy-can-transceiver: Skip warning if no "max-bitrate"

According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.

Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation

The compatible strings in the driver don't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: da86d286cce8 ("dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/8d960029-e94d-224b-911f-03e5deb47ebc@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation

The compatible string in the driver doesn't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/0a82be92-ce85-da34-9d6f-4b33034473e5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: tegra-xusb: Convert to json-schema

Convert the Tegra XUSB pad controller bindings from free-form text
format to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230113150804.1272555-1-thierry.reding@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: fix the regs layout table for sdx65 uniphy PHY

The sdx64 uniphy gen3x1 PHY references the qmp_v4_usb3phy_regs_layout
while the PHY itself uses v5 regs. While there are only minor
differences between v4 and v5 regs and none of them concerns registers
mentions in regs_layout, switch the PHY to use
qmp_v5_usb3phy_regs_layout, to remove possible confusion.

Fixes: 14d98d3bf70e ("phy: qcom-qmp-usb: fix regs layout arrays")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212138.421583-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: fix the regs layout table for sm8450 gen3x1 PHY

The sm8450 gen3x1 PHY references the pciephy_v4_regs_layout while the
PHY itself uses v5 regs. While there are only minor differences between
v4 and v5 regs and none of them concerns registers mentions in
regs_layout, switch the PHY to use pciephy_v5_regs_layout to remove
possible confusion.

Fixes: bbe207a1aba1 ("phy: qcom-qmp-pcie: rename regs layout arrays")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212138.421583-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: rework regs layout arrays

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212102.421491-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg

The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from
register layout.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212102.421491-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qualcomm: qmp-ufs: rename qmp_ufs_offsets_v5 to qmp_ufs_offsets

All currently known QMP UFS PHYs have the same offsets for register
sub-regions. Instead of using qmp_ufs_offsets_v5 for older generations
of PHYs, rename the offsets struct instance to remove _v5 suffix.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113195515.407866-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: ti: j721e-wiz: Add support to enable LN23 Type-C swap

The WIZ acts as a wrapper for SerDes and has Lanes 0 and 2 reserved
for USB for type-C lane swap if Lane 1 and Lane 3 are linked to the
USB PHY that is integrated into the SerDes IP. The WIZ control register
has to be configured to support this lane swap feature.

The support for swapping lanes 2 and 3 is missing and therefore
add support to configure the control register to swap between
lanes 2 and 3 if PHY type is USB.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230113150615.19375-3-sinthu.raja@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: ti: j721e-wiz: Manage TypeC lane swap if typec-dir-gpios not specified

It's possible that the Type-C plug orientation on the DIR line will be
implemented through hardware design. In that situation, there won't be
an external GPIO line available, but the driver still needs to address
this since the DT won't use the typec-dir-gpios property.

Add code to handle LN10 Type-C swap if typec-dir-gpios property is not
specified in DT.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230113150615.19375-2-sinthu.raja@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add HS G4 mode support to SC8280XP SoC

UFS PHY in SC8280XP SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC

UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC

UFS PHY in SM8350 SoC is capable of operating at HS G4 mode. Hence, add the
required register settings using the tables_hs_g4 struct instance.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers

SM8350 default init sequence sets some PCS registers to HS G3, thereby
disabling HS G4 mode. This has the effect on MPHY capability negotiation
between the host and the device during link startup and causes the
PA_MAXHSGEAR to G3 irrespective of device max gear.

Due to that, the agreed gear speed determined by the UFS core will become
G3 only and the platform won't run at G4.

So, let's remove setting these registers for SM8350 as like other G4
compatible platforms. One downside of this is that, when the board design
uses non-G4 compatible device, then MPHY will continue to run in the
default mode (G4) even if UFSHCD runs in G3. But this is the case for
other platforms as well.

Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC

UFS PHY in SM8250 SoC is capable of operating at HS G4 mode. Hence, add the
required register settings using the tables_hs_g4 struct instance. This
also requires a separate qmp_phy_cfg for SM8250 instead of reusing SM8150.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoC

UFS PHY in SM8150 SoC is capable of operating at HS G4 mode. Hence, add the
required register settings using the tables_hs_g4 struct instance.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_b

Since now there is support for configuring the HS Rate B mode properly,
let's move the register setting to tbls_hs_b struct for all SoCs.

This allows the PHY to be configured in Rate A initially and then in
Rate B if requested by the UFS driver.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode

Add separate tables_hs_g4 instance to allow the PHY driver to configure the
PHY in HS G4 mode. The individual SoC configs need to supply the Rx, Tx and
PCS register setting in tables_hs_g4 and the UFS driver can request the
Hs G4 mode by calling phy_set_mode_ext() with submode set to UFS_HS_G4.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode

Add separate tables_hs_b instance to allow the PHY driver to configure the
PHY in HS Series B mode. The individual SoC configs need to supply the
serdes register setting in tables_hs_b and the UFS driver can request the
Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tbls struct

As done for Qcom PCIe PHY driver, let's move the register settings to the
common qmp_phy_cfg_tbls struct. This helps in adding any additional PHY
settings needed for functionalities like HS-G4 in the future by adding one
more instance of the qmp_phy_cfg_tbls.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions

Only MSM8996 is using "_ufs_" naming convention for PHY definitions instead
of "_ufsphy_" as like other SoCs. So to maintain the uniformity, let's
rename all of the definitions to use "_ufsphy_".

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: Remove _tbl suffix from qmp_phy_init_tbl definitions

Following the other QMP PHY drivers like PCIe, let's remove the "_tbl"
suffix from the qmp_phy_init_tbl definitions. This helps in maintaining
the uniformity across all of the QMP PHY drivers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: convert meson-gxl-usb2-phy.txt to dt-schema

Convert the Amlogic Meson GXL USB2 PHY bindings to dt-schema.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v2-8-36ad050bb625@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Add SM6125 UFS PHY support

The SM6125 UFS PHY is compatible with the one from SM6115. Add a
compatible for it and modify the config from SM6115 to make them
compatible with the SC8280XP binding

Signed-off-by: Lux Aliaga <they@mint.lgbt>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20230108195336.388349-4-they@mint.lgbt
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: Add QMP UFS PHY compatible for SM6125

Document the QMP UFS PHY compatible for SM6125.

Signed-off-by: Lux Aliaga <they@mint.lgbt>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Acked-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230108195336.388349-3-they@mint.lgbt
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: correct clocks per variants

Different variants of Qualcomm USB3 DP PHY take different clocks
(according to upstream DTS and Linux driver):

  sc7280-herobrine-crd.dtb: phy-wrapper@88e9000: clocks: [[43, 151], [39, 0], [43, 153]] is too short
  sc7280-herobrine-crd.dtb: phy-wrapper@88e9000: clock-names:1: 'cfg_ahb' was expected
  ...
  sm8250-hdk.dtb: phy@88e9000: clocks: [[46, 185], [44, 0], [46, 187]] is too short
  sm8250-hdk.dtb: phy@88e9000: clock-names:1: 'cfg_ahb' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221225115944.55425-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: correct SC7280 compatibles

USB3 DP PHY on SC7280 is used with SM8250 fallback:

  sc7280-herobrine-evoker.dtb: phy-wrapper@88e9000: compatible: ['qcom,sc7280-qmp-usb3-dp-phy', 'qcom,sm8250-qmp-usb3-dp-phy'] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221225115944.55425-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,qusb2: do not define properties in "if" block

It is more readable to define properties in top-level "properties:" and
restrict them (if needed) per compatible in the "if" block.  Defining
properties in "if" block  does not work correctly with
additionalProperties:false:

  sc7180-trogdor-pazquel-lte-ti.dtb: phy@88e3000: 'qcom,bias-ctrl-value', 'qcom,charge-ctrl-value', 'qcom,hsdisc-trim-value',
    'qcom,imp-res-offset-value', 'qcom,preemphasis-level', 'qcom,preemphasis-width' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221224154226.43417-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles

Document SoC-specific compatibles with generic fallback (e.g.
qcom,usb-snps-hs-7nm-phy) already used in DTSI.  Add SoC-specific
compatibles for PHY on SDX55 and SDX65.

This disallows usage of the qcom,usb-snps-hs-5nm-phy and
qcom,usb-snps-hs-7nm-phy generic compatibles alone.  Do not touch
remaining two compatibles - qcom,usb-snps-femto-v2-phy and
qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not
sure what was the intention for them.

This fixes warnings like:

  sa8295p-adp.dtb: phy@88e5000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,sc8280xp-usb-hs-phy', 'qcom,usb-snps-hs-5nm-phy'] is too long
    'qcom,sc8280xp-usb-hs-phy' is not one of ['qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy']
    'qcom,usb-snps-hs-7nm-phy' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221223161835.112079-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: renesas: r8a779f0-eth-serdes: Remove retry code in .init()

Remove retry code in r8a779f0_eth_serdes_init() because
r8a779f0_eth_serdes_chan_setting() was fixed so that no timeout
happened in the initializing procedure.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221226065316.3895480-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: renesas: r8a779f0-eth-serdes: Add .power_on() into phy_ops

Add r8a779f0_eth_serdes_power_on() to initialize the hardware for
each channel from the step 9 or later on the datasheet. In other words,
the procedure from the step 1 to 8 is for all channel and it is needed
once only. So, the .init() in any channel instance is called, this
driver initializes the hardware from step 1 to 8. And then, .power_on()
is called, this driver initializes the hardware from step 9 or later.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221226065316.3895480-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,usb-hsic-phy: convert to DT schema

Convert Qualcomm USB HSIC PHY bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221222155805.139284-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: freescale: imx8m-pcie: Add one missing error return

There should be one error return when fail to fetch the perst reset.
Add the missing error return.

Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: tegra: xusb: Support USB role default mode

Support role-switch-default-mode property when usb-role-switch is
enabled.

Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20221216042146.99307-1-haotienh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"

This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156.

This commit introduced an init sequence from downstream DT [1] in the
driver.  As mentioned by the comment above the HSPHY_INIT_CFG macro for
this sequence:

    /*
     * The macro is used to define an initialization sequence.  Each tuple
     * is meant to program 'value' into phy register at 'offset' with 'delay'
     * in us followed.
     */

Instead of corresponding to offsets into the phy register, the sequence
read by the downstream driver [2] is passed into ulpi_write [3] which
crafts the address-value pair into a new value and writes it into the
same register at USB_ULPI_VIEWPORT [4].  In other words, this init
sequence is programmed into the hardware in a totally different way than
downstream and is unlikely to achieve the desired result, if the hsphy
is working at all.

An alternative method needs to be found to write these init values at
the desired location.  Fortunately mdm9607 did not land upstream yet [5]
and should have its compatible revised to use the generic one, instead
of a compatible that writes wrong data to the wrong registers.

[1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585
[2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183
[3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468
[4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418
[5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/

Reported-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: Add Qualcomm SM6115 / SM4250 USB3 PHY support

Enable SM6115 / SM4250 USB3 PHY support by adding the
qmp_phy_cfg data. Since this PHY is the same as the
one used on QCM2290, reuse the QCM2290 qmp_phy_cfg data
already available.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20221213122843.454845-4-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: Fix QSERDES_V3_RX_UCDR_PI_CONTROLS init val

As per the Qualcomm QMP v3 PHY programming guide document,
QSERDES_V3_RX_UCDR_PI_CONTROLS configuration should be set to an
initial configuration value of 0x80.

Fix the same.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20221213122843.454845-3-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,qmp-usb: Add SM6115 / SM4250 USB3 PHY

Add dt-bindings for USB3 PHY found on Qualcomm SM6115 / SM4250 SoC.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213122843.454845-2-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()

The clk_disable_unprepare() should be called in the error handling of
rockchip_usb2phy_power_on().

Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: renesas: r8a779f0-eth-serdes: Fix register setting

Fix register setting which is typo in r8a779f0_eth_serdes_chan_setting().

Fixes: 742859441d44 ("phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221226064216.3895421-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()

sp_usb_phy_probe() will call platform_get_resource_byname() that may fail
and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as
input, which may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.

Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: mediatek,tphy: add support for mt7986

Add compatible string for mt7986.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230106152845.88717-2-linux@fw-web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: sun4i-usb: Replace types with explicit quirk flags

So far we were assigning some crude "type" (SoC name, really) to each
Allwinner USB PHY model, then guarding certain quirks based on this.
This does not only look weird, but gets more or more cumbersome to
maintain.

Remove the bogus type names altogether, instead introduce flags for each
quirk, and explicitly check for them.
This improves readability, and simplifies future extensions.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-4-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: sun4i-usb: add support for the USB PHY on F1C100s SoC

The F1C100s SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-3-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY

Allwinner F1C100s has the most simple USB PHY among all Allwinner SoCs,
because it has only one OTG USB controller, no host-only OHCI/EHCI
controllers.

Add a binding document for it. Following the current situation of one
YAML file per SoC, this one is based on
allwinner,sun8i-v3s-usb-phy.yaml, but with OHCI/EHCI-related bits
removed. (The same driver in Linux, phy-sun4i-usb, covers all these
binding files now.)

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-2-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: tegra: xusb: Add Tegra234 support

Add support for the XUSB pad controller found on Tegra234 SoCs. It is
mostly similar to the same IP found on Tegra194, because most of
the Tegra234 XUSB PADCTL registers definition and programming sequence
are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
driver with Tegra186 and Tegra194 XUSB PADCTL.

Introduce a new feature, USB2 HW tracking, for Tegra234.
The feature is to enable HW periodical PAD tracking which measure
and capture the electric parameters of USB2.0 PAD.

Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-6-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: tegra: xusb: Disable trk clk when not in use

Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.

Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.

Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-5-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: move type-specific headers to particular driver

Remove QMP PHY type-specific headers inclusion from the common header
and move them to the specific PHY drivers to cleanup the namespaces used
by different drivers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-14-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: fix regs layout arrays

Drop qcm2290_usb3phy_regs_layout, it is a duplicate of
qmp_v3_usb3phy_regs_layout. Introduce qmp_v5_usb3phy_regs_layout to be
used for sm8350 and sc8280xp.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-13-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: rework regs layout arrays

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-12-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL reg

The QPHY_PCS_MISC_TYPEC_CTRL register is not used, remove it from
register layout.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-11-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg

The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from
register layout.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-10-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: rename regs layout arrays

Rename regs layouts to follow the QMP PHY version.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-9-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: rework regs layout arrays

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-8-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: split UFS-specific v2 PCS registers to a separate header

Follow other QMP headers, split and rename UFS-specific PCS registers to
ease comparing regs differences.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-7-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie-msm8996: rework regs layout arrays

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: rename regs layout arrays

Rename regs layouts to follow the QMP PHY version.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: rework regs layout arrays

Use symbolic names for the values inside reg layout arrays.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>