iio:adc:lpc32xx use SPDX-License-Identifier

Convert the driver to SPDX license description which allow removing
several lines in the file.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: move lpc32xx-adc out of staging

The drivers has been moved out since
0097e20e7771 ("staging:iio:adc:lpc32xx Move out of staging.") in v4.10,
so let's align the binding documentation.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"

There is a spelling mistake in several dev_err messages. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: exynos-adc: Fix NULL pointer exception on unbind

Fix NULL pointer exception on device unbind when device tree does not
contain "has-touchscreen" property.  In such case the input device is
not registered so it should not be unregistered.

    $ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind

    Unable to handle kernel NULL pointer dereference at virtual address 00000474
    ...
    (input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80)
    (exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40)
    (platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac)
    (device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4)
    (unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0)
    (kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c)
    (__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184)
    (vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac)
    (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: sps30: fix a loop timeout test

The "while (tries--) {" loop is a postop so it exits with "tries" set
to -1.

Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:accel:adxl345: Change alignment to match paranthesis

Align broken line to match upper line parenthesis. Solves the
checkpatch.pl's message:

CHECK: Alignment should match open parenthesis

Signed-off-by: Luciana da Costa Marques <lucianadacostamarques@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:dac7612: device tree bindings

Bindings for dac7612.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612

It is a driver for Texas Instruments Dual, 12-Bit Serial Input
Digital-to-Analog Converter.

Datasheet of this chip:
http://www.ti.com/lit/ds/sbas106/sbas106.pdf

Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7476: Add support for TI ADS786X ADCs

Add support for Texas Instruments ADS7866, ADS7867 and ADS7868
8/10/12 bit Single channel ADC.

Datasheet: http://www.ti.com/lit/ds/symlink/ads7868.pdf

Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7768-1: Add support for setting the sampling frequency

The AD7768-1 core ADC receives a master clock signal (MCLK). The MCLK
frequency combined with the MCLK division and the digital filter
decimation rates, determines the sampling frequency. Along with
MCLK_DIV, the power mode is also configured according to datasheet
recommendations.

From user space, available sampling frequencies can be read. However,
it is not required for an exact value to be entered, since the driver
will look for the closest available match.

When the device configuration changes (for example, if the filter
decimation rate changes), a SYNC_IN pulse is required.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers: iio: dac: Fix wrong license for ADI drivers

Analog Devices drivers are typically GPL v2 only. This patch fixes the
inconsistencies between the module license and SPDX.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

IIO: add Ingenic JZ47xx ADC driver.

Add an IIO driver for the ADC hardware present on Ingenic JZ47xx SoCs.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.

Add device tree bindings for the ADC controller on JZ47xx SoCs,
used by the ingenic-adc driver.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.

Add documentation for the ADC controller on JZ47xx SoCs,
used by the ingenic-adc driver.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:bmi160: use if (ret) instead of if (ret < 0)

We are using "if (ret < 0)" in many places in which the function returns 0
on success. Use "if (ret)" instead for better clarity and correctness.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:bmi160: use iio_pollfunc_store_time

Currently, we snap the timestamp after reading from the buffer and
processing the event. When the IIO poll function is triggered by an
interrupt,  we can get a slightly more accurate timestamp by snapping it
prior to reading the data, since the data was already generated prior to
entering the trigger handler. This is not going to make a huge difference,
but we might as well improve slightly.

Do this by using iio_pollfunc_store_time as other drivers do.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: bmi160 document open-drain property

We have added an optional boolean property for configuring a BMI160
interrupt pin as open-drain, as opposed to the default push-pull, so
document this.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: fix incorrect bmi160 IRQ note

The bmi160 bindings say that the BMI160 requires level-triggered,
active-low interrupts, but it actually supports all interrupt types, so fix
the note to reflect that.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:bmi160: add drdy interrupt support

Add interrupt support for the data ready signal on the BMI160, which fires
an interrupt whenever new accelerometer/gyroscope data is ready to read.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:bmi160: add SPDX identifiers

Add SPDX identifiers (GPL 2) for the BMI160 driver. bmi160.h had an
identifier, but the other files did not.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: wlan-ng: formatting change in cfg80211.c

Resolve "Line over 80 characters" warning from checkpatch

Signed-off-by: K Hodges <khodges42@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: formatting change in ashmem.c

Resolved "Line over 80 characters" warning from checkpatch

Signed-off-by: K Hodges <khodges42@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rename members of struct rtllib_device - style

Rename following members of struct rtllib_device to fix checkpatch
warning: Avoid CamelCase
pDot11dInfo -> dot11d_info
bGlobalDomain -> global_domain
IbssStartChnl -> bss_start_channel

Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rename members of struct rt_dot11d_info - style

Rename following members of struct rt_dot11d_info to fix checkpatch
warning: Avoid Camelcase
bEnabled -> enabled
CountryIeLen -> country_len
CountryIeBuf -> country_buffer
CountryIeSrcAddr -> country_src_addr
CountryIeWatchdog -> country_watchdog
MaxTxPwrDbmList -> max_tx_power_list
State -> state

Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rename members of struct chnl_txpow_triple - style

Rename following members of chnl_txpow_triple to fix checkpatch
warning: Avoid CamelCase
FirstChnl -> first_channel
NumChnls -> num_channels
MaxTxPowerInDbm -> max_tx_power

Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename linux_wlan.c and linux_mon.c

Rename linux_wlan.c and linux_mon.c to wilc_netdev.c and wilc_mon.c to
include 'wilc_' prefix.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove 'linux_' prefix in function names

Remove 'linux_' prefix and replace it with 'wilc_' namespace.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename wilc_frmw_to_linux()

Rename wilc_frmw_to_linux() to wilc_frmw_to_host() to be remove the _linux
suffix.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: added 'wilc_' prefix for function in wilc_sdio.c file

Cleanup patch to have proper follow clear namespace in wilc_sdio.c file.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid function forward declaration in wilc_sdio.c file

Cleanup patch to avoid function forward declaration by reordering the
function.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move macro and function prototype from wilc_wlan_if.h file

Move data structure and function prototype from 'wilc_wlan_if.h file.
Now, this file contains constant specific to the firmware.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add 'wilc_' prefix to have proper namespace

Cleanup patch to rename data structure and function name to have 'wilc_'
prefix.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix to set correct value for 'vif_num'

Set correct value in '->vif_num' for the total number of interfaces and
set '->idx' value using 'i'.

Fixes: 735bb39ca3be ("staging: wilc1000: simplify vif[i]->ndev accesses")
Fixes: 0e490657c721 ("staging: wilc1000: Fix problem with wrong vif index")
Cc: <stable@vger.kernel.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Use the correct style for SPDX license Identifier

This patch corrects the style for SPDX license Identifier in mac.h
by using "/* */" in place of "//" as per Linux kernel licensing rules.
Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove redundant nul check on pointer dev

There is a null check on pointer dev which implies it may be null, however
dev can never be null as it is set in rtl8192_usb_probe via the call
to usb_set_intfdata.

Detected by CoverityScan, CID#143078 ("Dereference after null check")

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Rename setDisplayControl to set_display_control - style

Fix checkpatch.pl warning:
    CHECK: Avoid CamelCase: <setDisplayControl>

Signed-off-by: Jin Chen <nobijinc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723bs: remove some dead code

"psecnetwork" is the address of &psecuritypriv->sec_bss.  Since
->sec_bss isn't the first member of the struct that means that
"psecnetwork" can't be NULL.

We can just remove this dead code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: define p2p related static variable as constants

Add constant qualifer for 'p2p_vendor_spec' & 'p2p_oui' static
variable because they are treated like constant values.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move 'curr_channel' static variable in 'wilc' struct

Avoid the use of static variable and move it as part of wilc structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move static variable 'wlan_channel' to 'wilc' struct

Avoid use of static variable 'wlan_channel' by moving it inside the wilc
structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid use of static variable in linux_mon.c

Define local variable for 'srcadd' & 'bssid' static variables and use
ether_addr_copy() to copy value into them.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid use of 'hif_deinit_lock' static variable

Avoid use of static variable 'hif_deinit_lock' and move it as part of
wilc struct.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused struct 'add_sta_param'

Remove 'add_sta_param' structure as its not used now.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add check before performing operation on net_device

Before calling an operation on net_device check if that interface is
available.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid use of interface names for validation

Avoid use of interface name i.e 'wlan0' & 'p2p0' to check the interface
type in dev_state_ev_handler(). Now making use of netdev_ops and iface
type to know interface. Reorder the functions to avoid the forward
declaration after the above changes

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use random number for cookie instead of pointer

Use random number to assign to cookie value.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: refactor code to use cookie information

Make use of cookie information to pass to wpa_s and handle cookie value
received in the cfg80211_ops callbacks.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: refactor linux_wlan_init_test_config()

Refactor linux_wlan_init_test_config() to use correct endianness for wid
values and remove unnecessary code.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove use of 'terminated_handle' static variable

Remove use of 'terminated_handle' variable and set the 'hif_drv' to
NULL once it's free.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: refactor scan() cfg80211 ops callback

Refactor scan() cfg80211 callback function and use correct value for
valid channel number limit.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: make use of iface type to identify p2p interface

Remove SSID string compare instead use interface type check for p2p
client interface.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename timeout related macros

Rename timeout related macros to have their unit clear from their name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unnecessary debug log messages

Remove unnecessary debug log messages.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove redundant macros for radiotap

Remove macro define which are already present in the included header.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove conditional lock in wilc_wfi_deinit_mon_interface()

wilc_wfi_deinit_mon_interface() calls unregister_netdev() which
requires the rtnl lock again. Now move wilc_wfi_deinit_mon_interface()
out of wilc_mac_close(). Also remove explicit call to wilc_mac_close()
because unregister_netdev() takes care of calling wilc_mac_close().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable

Avoid use of static variable for monitor net_device and move it inside
wilc structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: cdev: add missing check for cdev_add failure

Currently the call to cdev_add is missing a check for failure. Fix this by
checking for failure and exiting via a new error path that ensures the
allocated comp_channel struct is kfree'd.

Detected by CoverityScan, CID#1462359 ("Unchecked return value")

Fixes: 9bc79bbcd0c5 ("Staging: most: add MOST driver's aim-cdev module")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: cleanup ODM_CmnInfoPtrArrayHook()

Convert single case switch to if statement to cleanup and
simplify code in ODM_CmnInfoPtrArrayHook().

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-spi: Clean up comparison to NULL

Fix checkpatch check: Comparison to NULL could be written "!master"

Signed-off-by: Jasminko Dedic <betelge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Remove superfluous pre-declaration of struct mt7621_spi

This patch removes the superfluous pre-declaration of struct mt7621_spi.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: NeilBrown <neil@brown.name>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Use macros instead of hardcoded values

This patch uses macros instead of hardcoded values for the SPI_MASTER
register access in mt7621_spi_reset() and mt7621_spi_prepare().

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Sort register definitions

This patch sorts the SPI register definitions by increasing addresses.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewd-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Use recommended comment style

This patch changes some comments to use the recommended multi-line
comment style.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Minor cosmetic changes

Align  macro definitions and add some empty lines to make the code better
readable.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewd-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Remove superfluous SPI_BPW_MASK definition

This patch removes the SPI_BPW_MASK definition as this is already
available in include/linux/spi/spi.h.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Add return code check on device_reset()

This patch adds a return code check on device_reset() and removes the
compile warning.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Clean up excessive header usage

This patch removes unnecessary header includes and sorts the remaining
ones alphabetically.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: spi: mt7621: Switch to SPDX identifier

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-eth/ethtool.c: Correction of SPDX license identifier

This patch fixes the checkpatch.p1 warning:

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
+/*

It includes the SPDX expression for GPL-2.0 according to the text license
in the top of the C file.

Signed-off-by: Carlos Henrique Lima Melara <charlesmelara@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: prefix header search paths with $(srctree)/

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops.c: Remove redundant blank line

Removed redunant blank line. Issue found by checkpatch.

Signed-off-by: Sandesh Kenjana Ashok <kas.sandesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.1a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

* tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (67 commits)
  iio: chemical: sps30: remove printk format specifier
  staging: iio: frequency: ad9833: Load clock using clock framework
  staging: iio: frequency: ad9833: Get frequency value statically
  dt-bindings: iio: light: Add max44009
  iio: light: add driver for MAX44009
  dt-bindings: iio: adc: Add docs for AD7768-1
  iio: adc: Add AD7768-1 ADC basic support
  staging: iio: cdc: ad7152: remove driver completely
  iio: imu: mpu6050: Add support for the ICM 20602 IMU
  dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  dt-bindings: iio: pressure: add LPS22HH bindings
  iio: st_accel: use ACPI orientation data
  iio: adc: add NPCM ADC driver
  dt-binding: iio: add NPCM ADC documentation
  iio: chemical: sps30: allow changing self cleaning period
  dt-bindings: iio: chemical: Add bindings for bme680
  iio: chemical: bme680: Add device-tree support
  iio:st_pressure:initial lps22hh sensor support
  iio: accell: mma8452: add vdd/vddio regulator operation support
  dt-bindings: iio: accel: mma8452: add power supplies property
  ...

iio: chemical: sps30: remove printk format specifier

pr_fmt is used by printk wrappers. There are not any in the driver
code so remove the format specifier.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: frequency: ad9833: Load clock using clock framework

The clock frequency is loaded from device-tree using clock framework
instead of statically value. The change allow configuration of
the device via device-trees and better initialization sequence.
This is part of broader effort to add device-tree support to this driver
and take it out from staging.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: frequency: ad9833: Get frequency value statically

The values from platform data were replaced by statically values.
This was just a intermediate step of taking this driver out of staging and
load data from device tree.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: Add max44009

Adds device tree bindings for the max44009 light sensor.

Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: add driver for MAX44009

The MAX44009 is a low-power ambient light sensor from Maxim
Integrated. It differs from the MAX44000 in that it doesn't have
proximity sensing and that it requires far less current (1 micro-amp
vs 5 micro-amps). The register mapping and feature set between the
two are different enough to require a new driver for the MAX44009.

Developed and tested with a BeagleBone Black and UDOO Neo (i.MX6SX)

Supported features:

* Reading lux (processed value)

* Rising and falling illuminance threshold
  events

* Configuring integration time

https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf

Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: Add docs for AD7768-1

Document support for AD7768-1 Analog to Digital Converter.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: Add AD7768-1 ADC basic support

The ad7768-1 is a single channel, precision 24-bit analog to digital
converter (ADC).

This basic patch configures the device in fast mode, with 32 kSPS and
leaves the default sinc5 filter.

Two data conversion modes are made available. When data is retrieved by
using the read_raw attribute, one shot single conversion mode is set.
The continuous conversion mode is enabled when the triggered buffer
mechanism is used. To assure correct data retrieval, the driver waits
for the interrupt triggered by the low to high transition of the DRDY
pin.

Datasheets:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: cdc: ad7152: remove driver completely

The AD7153 part has been obsoleted for some time. The AD7152 part will be
obsolete in the coming future.
Moving it out of staging doesn't make sense anymore. Which makes the driver
enter a limbo state.

This patch removes the driver completely, so that no effort is placed on
it, allowing people to focus on other parts that will still be around.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: mpu6050: Add support for the ICM 20602 IMU

The Invensense ICM-20602 is a 6-axis MotionTracking device that
combines a 3-axis gyroscope and an 3-axis accelerometer. It is very
similar to the ICM-20608 imu which is already supported by the mpu6050
driver. The main difference is that the ICM-20602 has the i2c bus
disable bit in a separate register.

Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: add icm20602 bindings to mpu6050

Adding the invensense ICM-20602 to the compatible list of the mpu6050
driver

Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: pressure: add LPS22HH bindings

Fix following checkpatch warnings:
WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/
.compatible = "st,lps22hh",

WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/
.compatible = "st,lps22hh",

Fixes: e5aab7b0d88d ("iio:st_pressure:initial lps22hh sensor support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_accel: use ACPI orientation data

Platform-specific ST accelerometer mount matrix information can be
provided by returning a package of 6 integers from the ACPI _ONT
method. This has been seen on Acer products such as Veriton Z4860G,
Z6860G and A890, which include a ST SMO8840 sensor. We have also
confirmed experimentally that the Windows driver uses such information.

The _ONT data format was explained by a ST vendor contact. However,
strangely enough, the _ONT transformations must be applied after first
applying another mount matrix which we determined experimentally. ST
have not commented on why this is the case, but we imagine that perhaps
earlier devices (before _ONT was introduced) required this translation
and hence it became 'standard.'

Interpret the _ONT data and export the equivalent mount matrix to
userspace.

If no _ONT data is present, no mount matrix is exported.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: rtl8188eu: refactor rtw_reset_securitypriv()

Move the declaration of 'psec_priv' out of the else path and use it
in the if path as well to improve readability. Also clears line over
80 characters checkpatch warnings.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: &array[0] -> array

Change '&array[0]' to just 'array' in rtw_reset_securitypriv().

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unncessary asignment to cleanup long line

Instead of first asign 'wrqu.data.length = p - buff' use 'p - buff'
directly in min_t() in the subsequent asignment. Clears a line over
80 characters checkpatch warning.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: cleanup declarations in mlme_linux.c

Replace tabs with spaces in declarations to cleanup whitespace.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unnecessary initializations

The local variables backup_index, backup_counter and backup_time
in rtw_reset_securitypriv() are all asigned before their uses, so
initialization to zero is not necessary.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: cleanup comments in mlme_linux.c

Cleanup comments to avoid lines over 80 characters
and follow kernel style for block comments.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove redundant reset of station statistics

Driver sends configuration wids to reset connection statistics in the
device, but the device already resets it when starting a new connection

Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: complete POSIX ACL support

Let's add .get_acl() to read the file's acl from its xattrs
to make POSIX ACL usable.

Here is the on-disk detail,
fullname: system.posix_acl_access
struct erofs_xattr_entry:
        .e_name_len = 0
        .e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_ACCESS (2)

fullname: system.posix_acl_default
struct erofs_xattr_entry:
.e_name_len = 0
.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_DEFAULT (3)

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: use xattr_prefix to wrap up

Let's use xattr_prefix instead of open code.
No logic changes.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pinctrl: Test devm_kzalloc for failure while improving the code

This patch tests the return of devm_kzalloc for failure and
improves the code.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtlwifi: replace ---help--- with help in Kconfig

This patch fixes the checkpatch.pl warning:

WARNING: prefer 'help' over '---help---' for new help texts

Signed-off-by: Cezary Kierzyk <virdipravum.n008d3v@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtlwifi: Start statement on a tabstop

Fix the following checkpatch.pl warning:
        WARNING: Statements should start on a tabstop
        #208: FILE: pci.h:208:
        + /*ASPM*/ u8 const_pci_aspm;

Signed-off-by: Felipe Cardoso Resende <felipecardoso.fcr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Replaced spaces with tab.

Replaced the spaces with tabs as suggested by checkpatch.

Signed-off-by: Michiel Schuurmans <michielschuurmans@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.0-rc4 into staging-next

We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.0-rc4

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the swapped outb() parameters in the KASLR code

   - Fix the PKEY handling at fork which missed to preserve the pkey
     state for the child. Comes with a test case to validate that.

   - Fix the entry stack handling for XEN PV to respect that XEN PV
     systems enter the function already on the current thread stack and
     not on the trampoline.

   - Fix kexec load failure caused by using a stale value when the
     kexec_buf structure is reused for subsequent allocations.

   - Fix a bogus sizeof() in the memory encryption code

   - Enforce PCI dependency for the Intel Low Power Subsystem

   - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
  x86/entry/64/compat: Fix stack switching for XEN PV
  x86/kexec: Fix a kexec_file_load() failure
  x86/mm/mem_encrypt: Fix erroneous sizeof()
  x86/selftests/pkeys: Fork() to check for state being preserved
  x86/pkeys: Properly copy pkey state at fork()
  x86/kaslr: Fix incorrect i8254 outb() parameters
  x86/intel/lpss: Make PCI dependency explicit