pinctrl: sh-pfc: r8a7791: Add alternative MSIOF pin groups

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit e6fae2d03dc4f9172db88ad18a577c2a45b9e8ac)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a7790: Add alternative MSIOF pin groups

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 7033168da51e43ebba7870f089d275b4589df0c5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: pfc: r8a7791: add mux data for IIC(B) cores

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 6787141361dc77b5d55bf58760029f846244ba3a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a7790: Add QSPI pin groups

A QSPI function set consists of 3 groups:
  - qspi_ctrl (2 control wires)
  - qspi_data2 (2 data wires, for Single/Dual SPI)
  - qspi_data4 (4 data wires, for Quad SPI)

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 202909cdf117743bdbf8abc0f817950c8955c8cf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS

Create a new group for the USB0 OVC/VBUS pin by itself. This
allows us to monitor PWEN as GPIO on the Lager board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 97e00faaf16a0642cac47937e26f437651a6b4a4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a7791: Add QSPI pin groups

A QSPI function set consists of 3 groups:
  - qspi_ctrl (2 control wires)
  - qspi_data2 (2 data wires, for Single/Dual SPI)
  - qspi_data4 (4 data wires, for Quad SPI)

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 2d0c386f135e41865f15e467fa1c6c0ec93d4a60)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7791

This patch adds DT support for r8a7791.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 81918d25a7ae2a7eada4237d00b8d6dbecffda6c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7790

This patch updates r8a7790 DT data to have SoC specific settings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 423f6c2e977de73b8723e73d8cc585de40893f5b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7779

This patch updates r8a7779 DT data to have SoC specific settings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 81bbbc7278fa109fb691446a521dcfc18b87e57d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7778

This patch updates r8a7778 DT data to have SoC specific settings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit b3a5d4ce65162d27a495b8fa3ac21dcdf58738b1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sdhi: tidyup sh_mobile_sdhi_of_match position

It is easier to read if sh_mobile_sdhi_of_cfg and
sh_mobile_sdhi_of_match are closer.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 2772ef30eacd72fef013ac2fade2f384342ba6c7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: tmio: Adapt to proper PM configs for exported functions

Since the users of the exported PM functions are now using the modern
PM ops macros, we can convert to the proper corresponding PM configs.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 710dec95d579bf59c157358cc9cf7b42907d1c0f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: tmio_mmc: Convert from legacy to modern PM ops

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit c8964481d0273ef77a37ed2c627482fde3a1222c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sh_mobile_sdhi: Use modern PM macros to define pm callbacks

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 4e262d7f6fd43d798175cf26223c5bd3ebfd7b13)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: ensure pm_runtime cannot suspend the device during init

The pm_rumtime work queue is causing the device to be suspended during
initialisation, thus the initialisation may not be able to access registers
properly. As the code is called from a work queue, it is possible that this
is not seen from certain configurations/builds due to the asynchronos
nature of the code.

Another issue has also been found where the network device registration
calls back into the driver thus causing further pm_runtime calls that
also caused issues with the MDIO bus code. This has now been checked
and is the only place the MDIO can be called without the device open.

Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the
pm system does not suspend it during the probe() call and remove the
now unnecessary pm_runtime_resume() call. Also add a call in the error
path to call pm_runtime_disable().

This fixes the external abort that can cause /sbin/init or other such
init processed to die.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit b5893a08812602de164fa5ac6494f84df8d09a4f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: Remove goto statements that jump straight to a return

"goto" is well accepted for error paths in the kernel but should not be
used unnecessarily. Return the correct value directly instead of using a
goto when possible.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f738a13d8365b0f824f3f20450b413f55374f175)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: Register MDIO bus before registering the network device

Network API functions that rely on the MDIO bus can be called as soon as
the driver calls register_netdev(). Register the MDIO bus before the
network device to avoid race conditions.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit daacf03f0bbfefee3df107c3f7659d22e22538a7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: Simplify MDIO bus initialization and release

The network device passed to the sh_mdio_init and sh_mdio_release
functions is only used to access the sh_eth_private instance. Pass it
directly to those functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit bd920ff553ba17f19372501a14e432d9d92b102b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: Use the platform device as the MDIO bus parent

The MDIO bus parent is set to the network device. Beside not reflecting
the hardware topology, this prevents registering the MDIO bus before
initializing the network device. Fix it by setting the MDIO bus parent
to the platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a5bd60608936fbb84471a80592401ce29a68de71)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: Use the platform device for memory allocation

Memory allocated for the MDIO bus with the devm_kzalloc() API is
associated with the network device. While this will cause memory to be
freed at the right time, it doesn't allow allocating memory before the
network device is initialized.

Replace the network device with the parent platform device for memory
allocation to remove that dependency. This also improves consistency
with the other devm_* calls in the driver that all use the platform
device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit aa8d422510969b705656e49fc0166d862aca9246)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: fold netif_msg_*() and netdev_*() calls into netif_*() invocations

Now that we call netdev_*() under netif_msg_*() checks, we can fold these into
netif_*() macro invocations.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 8d5009f6a9d9f4ef62a39bf68b53379b2b766c1c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: convert dev_*() to netdev_*() calls

Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit
shorter and at the same time give more information on a device.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit da2468555643efbde3fb026cd46e5245800cc872)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: convert pr_*() to netdev_*() calls

Convert pr_*() to netdev_*() calls as the latter provide info on a device.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f75f14ec2f7b552dc87b4b57b2a19e487378f774)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: exit probe with unknown register layout

Exit the driver's probe() method when the register layout is unknown as the
driver would cause kernel oops in this case anyway.

While at it, move the corresponding error message printout and convert it from
pr_err() to dev_err().

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 264be2f5a973cc85be3e31d6bf6234b55a256627)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: update OF PHY registeration

If the sh_eth device is registered using OF, then the driver
should call of_mdiobus_register() to register the PHYs described
in the devicetree and then use of_phy_connect() to connect the
PHYs to the device.

This ensures that any PHYs registered in the device tree are
appropriately connected to the parent devices nodes so that
the PHY drivers can access their OF properties.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 702eca02b7c8574b42359512ebccfa777a71f66e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: add device tree support

Add support of the device tree probing for the Renesas SH-Mobile SoCs
documenting the device tree binding as necessary.

This work is loosely based on the original patch by Nobuhiro Iwamatsu
<nobuhiro.iwamatsu.yj@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit b356e978e92fccd17a3e4620a4821bdbfb706c1a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh_eth: use ETH_ZLEN instead of home-grown #define

The driver #define's and uses ETHERSMALL macro for the minimum Ethernet frame
size for which we have a standard macro ETH_ZLEN.  Use the latter  instead of
the home-grown one.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 730c8c69bc8d4640336885e20e719b0842d0fcb2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI

If the kernel is built to support multi-ARM configuration with shmobile
support built in, then drivers/sh is not built. This contains the PM
runtime code in drivers/sh/pm_runtime.c, which implicitly enables the
module clocks for all devices, and thus is quite essential.
Without this, the state of clocks depends on implicit reset state, or on
the bootloader.

If ARCH_SHMOBILE_MULTI then build the drivers/sh directory, but ensure that
bits that may conflict (drivers/sh/clk if the common clock framework is
enabled) or are not used (drivers/sh/intc), are not built.
Also, only enable the PM runtime code when actually running on a shmobile
SoCs that needs it.

ARCH_SHMOBILE_MULTI was added a while ago by commit
efacfce5f8a523457e9419a25d52fe39db00b26a ("ARM: shmobile: Introduce
ARCH_SHMOBILE_MULTI"), but drivers/sh was compiled for both
ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI until commit
bf98c1eac1d4a6bcf00532e4fa41d8126cd6c187 ("ARM: Rename ARCH_SHMOBILE to
ARCH_SHMOBILE_LEGACY").

Inspired by a patch from Ben Dooks <ben.dooks@codethink.co.uk>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3c90c55dcde745bed81f6447f24ba96bda43d984)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh: intc: Enable driver compilation with COMPILE_TEST

This helps increasing build testing coverage.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4f3068f60503e08bc9e729528d9e54289980fa96)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add runtime PM support, using spi core auto_runtime_pm

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 490c97747d5dc77dfb5826e2823b41d8b2ef7ecc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Fix loopback mode for Dual/Quad SPI Transfers

While normal Dual and Quad SPI Transfers are unidirectional, we must do
a bidirectional transfer if loopback mode is enabled, else rx_buf is not
filled.

With spidev it seemed to work, as spidev uses the same buffer for
tranmission and reception.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ba824d4971691a7f1f66429e378a08a95fbb5b79)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Remove empty rspi_cleanup()

If spi_master.cleanup() is not needed, it can be left unimplemented.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ab98fcba962a57cee9fdb97aff2b25248c93cea5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Only enable interrupts when there's a need to wait

rspi_wait_for_interrupt() unconditionally enables interrupts, even when the
wait condition is already satisfied. This causes a high interrupt load (2
interrupts/byte for full-duplex Single SPI transfers, 1 interrupt/byte for
RSPI with TX Only mode, or QSPI in unidirectional Dual or Quad Transfer
mode).

Change this to return immediately when the wait condition is satisfied.
This dramatically reduces the interrupt load, especially in high-speed
Quad Transfer mode, and increases transfer speed, as no interrupts need to
be handled when there's space available in the output FIFO, or data
available in the input FIFO.

Benchmark results for QSPI on r8a7791 while reading 1 MiB from 30 MHz SPI
FLASH on the Koelsch development board:

Before:
                        Single SPI      Dual SPI        Quad SPI
    Interrupts:         2096856         1048592         1048594
    Mbps:               0.9             1.6             1.6

After:

                        Single SPI      Dual SPI        Quad SPI
    Interrupts:         1048569         21295           8
    Mbps:               0.7             10.8            12.9

I don't know why Single SPI slowed down a bit.

I've also verified functionality for RSPI-RZ on r7s72100, but don't have
benchmark results as there's no SPI FLASH connected to RSPI on the Genmai
development board. Unlike RSPI and QSPI, RSPI-RZ has separate interrupts
for RX and TX, which shows that Single SPI transfers now generate (mostly)
RX interrupts, as expected.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 5dd1ad23af689591d70be06ee6efcc57d1ec2d16)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: fix build error when CONFIG_OF is not set

This patch fixes an issue that the following build error happens when
the CONFIG_OF is not set:

drivers/spi/spi-rspi.c: In function 'rspi_probe':
drivers/spi/spi-rspi.c:1203:26: error: 'rspi_of_match' undeclared (first use in this function)

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 64b67defe4eb4de2d2df8acd5584a9e28fa727d3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add support for Quad and Dual SPI Transfers on QSPI

Add support for Quad and Dual SPI Transfers on the Renesas Quad Serial
Peripheral Interface, as found in R-Car Gen2 SoCs like R-Car H2 (r8a7790)
and R-Car M2 (r8a7791):
  - Add unidirectional transfer methods for Quad/Dual SPI Transfers.
  - Program the sequencer to handle SPI messages with multiple transfer
    modes when Quad or Dual transfers are enabled for an SPI slave.
    Up to 4 transfer modes per SPI message are supported by the hardware.
  - Advertise the availability of Quad and Dual SPI modes on QSPI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 880c6d114fd79a6973708744c78c7f55da6aea4c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add DT support

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 426ef76dd8a394a0e04d096941cd9acb49539a3e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Use NULL as the clock ID

There's only one RSPI/QSPI clock, so we can use NULL as the clock ID

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 29f397b739ceef90c8b848f6579cbacd088e896e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Convert to clk_prepare_enable/disable_unprepare

Get the driver ready for the migration to the common clock framework by
calling clk_prepare_enable() and clk_disable_unprepare().

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 17fe0d9a28fe742c467f800625459cf7bcb44b3b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add support for loopback mode

Add support for specifying loopback mode.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 06a7a3cff042a36fb7e6af71039a17c6d1a6d90f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add support for RSPI on RZ/A1H

Add support for the RSPI variant in the RZ/A1H (r7s72100) SoC.

Main differences with RSPI on SH are:
  - Lack of TX only mode, hence we always have to use full duplex
    transfers,
  - The Data Register must be accessed used 8-bit operations.

RSPI on RZ is matched using the new "rspi-rz" platform device name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 862d357f84f009fdcba22be8d6a2f82ff80ab740)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add support for more than one interrupt

Add support for multiple interrupts, based on the SDK reference code.
This is needed for RZ/A1H, which supports 3 interrupts.

When using multiple interrupts, they must be called "rx" (SPRI) and "tx"
(SPTI). The error interrupt (SPEI) is not used, as it matters for slave
mode only.

When using a single interrupt, it may be called "mux". If it cannot be
found, the first interrupt in the device's resources will be used.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 9372220678cd4c62992f7637b2ee36b47fa58d37)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Merge qspi_send_pio() and qspi_receive_pio()

qspi_send_pio() and qspi_receive_pio() are very similar: they both send
and receive full duplex data to/from the hardware, but ignore the data
stream in the unused direction.
Merge them into qspi_transfer_out_in(), now supporting real full duplex.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 340a15e6f0d6cd436c55693f7328a1de02fcdb96)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Merge rspi_send_pio() and rspi_receive_pio()

rspi_send_pio() and rspi_receive_pio() are very similar:
  - the former only sends data, using TX Only Mode,
  - the latter sends and receives full duplex data to/from the hardware,
    but uses dummy transmit data.
Merge them into rspi_transfer_out_in(), now supporting full duplex if
needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 8449fd76deb9ac67a15a6fb8ead7bb4595d019d2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Abstract transfer_one() for RSPI and QSPI

Split off qspi_transfer_one() (which doesn't support DMA yet) from
rspi_transfer_one().
Replace the abstraction of send_pio()/receive_pio() by the abstracrion of
transfer_one().

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit eb557f75269e82dd26a79be536eca223ddc3eaf7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add rspi_data_{out,in,out_in}() helpers

Add helpers rspi_data_{out,in,out_in}() to write, read, or write and
read data to/from the Data Register, taking care of waiting until data
or space is available in the buffers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 35301c996046243ca6e41d490dea2823f045614c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Abstract 8/16-bit Data Register access

Add rspi_{write,read}_data(), to abstract 8-bit (QSPI, and RSPI on RZ/A1H)
versus 16-bit (RSPI) Data Register access.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 74da76865d57161cadf8f324281f23ed3eb5db9c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Use core message handling

Let the generic SPI core handle SPI messages, calling into our
rspi_transfer_one() method.

rspi_assert_ssl() and rspi_negate_ssl() are absorbed into
rspi_prepare_message() and rspi_unprepare_message(), as they actually
enable/disable the whole SPI function, instead of just (de)asserting the
chip select line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 79d2349542f38663c3096f389115b1f131d6e564)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Remove unused mesg parameter from {send,receive}_pio()

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 91949a2d4a96195ccd37322fafe8d16c68dda86e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

thermal: rcar-thermal: update thermal zone only when temperature changes

Avoid updating the thermal zone in case an IRQ was triggered but the
temperature didn't effectively change.
Note this is not a driver issue.
Below is a captured debug trace illustrating the purpose of this patch:
out of 8 thermal zone updates, only 2 are actually necessary.

[   41.120000] rcar_thermal_work(): cctemp=25000
[   41.120000] rcar_thermal_work(): nctemp=30000
[   41.120000] rcar_thermal_work(): temp is now 30000C, update thermal zone
[   58.990000] rcar_thermal_work(): cctemp=30000
[   58.990000] rcar_thermal_work(): nctemp=30000
[   58.990000] rcar_thermal_work(): same temp, do not update thermal zone
[   59.290000] rcar_thermal_work(): cctemp=30000
[   59.290000] rcar_thermal_work(): nctemp=30000
[   59.290000] rcar_thermal_work(): same temp, do not update thermal zone
[   59.590000] rcar_thermal_work(): cctemp=30000
[   59.590000] rcar_thermal_work(): nctemp=30000
[   59.590000] rcar_thermal_work(): same temp, do not update thermal zone
[   59.890000] rcar_thermal_work(): cctemp=30000
[   59.890000] rcar_thermal_work(): nctemp=30000
[   59.890000] rcar_thermal_work(): same temp, do not update thermal zone
[   60.190000] rcar_thermal_work(): cctemp=30000
[   60.190000] rcar_thermal_work(): nctemp=30000
[   60.190000] rcar_thermal_work(): same temp, do not update thermal zone
[   60.490000] rcar_thermal_work(): cctemp=30000
[   60.490000] rcar_thermal_work(): nctemp=30000
[   60.490000] rcar_thermal_work(): same temp, do not update thermal zone
[   60.790000] rcar_thermal_work(): cctemp=30000
[   60.790000] rcar_thermal_work(): nctemp=35000
[   60.790000] rcar_thermal_work(): temp is now 35000C, update thermal zone

I suspect this may be due to sensor sampling accuracy / fluctuation,
but no formal proof.

Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
(cherry picked from commit 9477165ec525d47abb1cb6523698e0cd89d65ddb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

thermal: rcar-thermal: fix same mask applied twice

Mask is already applied preceding the if statement.
Remove the second mask.

Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
(cherry picked from commit 206c0cba095acbb91d552d220207d690c9b29594)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: call rsnd_dai_pointer_update() from outside of lock

rsnd_soc_dai_trigger() will be called
after rsnd_dai_pointer_update() function
which is using rsnd_lock().
Thus, it should be called from outside of rsnd_lock().
Kernel will be hangup without this patch.
Special thanks to Kataoka-san

Reported-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 836b31fe1a9791d84ed95783ed42ebd5719f7918)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: fix clock prepare/unprepare

As with the previous commit, before a clock can be used it must be prepared
for use. Change from clk_enable() and clk_disable() to the versions of the
calls which also prepare and un-prepare the clocks.

Will fix warnings from the clock code when this is used.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 79861bbb759053a9b91026becc0915d0f1f8d37d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rcar: bugfix: it cares about the non-src case

src might not exist.
kernel will be hung-up without this patch in such case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit b1eac430b6a4bee6821273d9b41dd3593eb7830b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: add DeviceTree support

Support for loading the Renesas R-Car sound driver via DeviceTree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 90e8e50fce3585d6f9902701de08389b027dadc6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rcar: fixup SND_SOC_DAIFMT_CBx_CFx flags

SND_SOC_DAIFMT_CBx_CFx means "codec" side master/slave mode.
Then, rcar will be master mode if it was SND_SOC_DAIFMT_CBS_CFS.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit e1508289404ab6ca28e0dc931612600f0441c417)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: rename scu to src

R-Car sound has SCU unit which has SRC/CTU/MIX/DVC,
and current rsnd driver has scu.c and scu module.
Current scu.c has SRC support only.
My first concept was control these feature on scu.c
but, it become difficult and un-understandable now.
This patch rename scu to src

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ba9c949f797aa3af56303445812a452144c61c35)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove all rsnd_xxx_remove()

Now, rsnd_xxx_remove() do nothing.
remove these

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 9524be0e761edd9f3c020344677d914ed249d010)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: nothing to do on rsnd_dai_remove()

rsnd_dai_remove() called rsnd_path_exit(),
but these memory will be cleaned automatically.
Because it is created by devm_kzalloc().
nothing to do on rsnd_dai_remove()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 4076220767416b8b65009dd57eeb317c38d41baa)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: use mod probe method on SSI

Now, it can use .probe

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ff8f30e688477beead6d1e648fb11f321220a4d7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: use mod probe method on SCU

Now, it can use .probe

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 76c6fb5c49790da44d553f655182b426ade2c599)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: add probe/remove callback on rsnd_mod_ops

Each rsnd mod needs specific probe method,
and its best timing is DAI probe timing.
But current code runs it mod probe timing.
This patch adds new probe/remove callback to solve it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 7681f6ac6b6338932621f842d68e54f6267b785f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: call rsnd_scu_ssi_mode_init() from SSI

Current R-Car sound driver is assuming that
SCU mod is used even though it is not needed.
Because scu.c is controlling SSIU too.
(it is Gen1 compatibility)
But, SCU mod will be really not used if new platform dai
feature was added.
Thus, rsnd_scu_ssi_mode_init() is called from SSI
directory by this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 221bf523e31306c1095b28932e079950108e3887)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: add rsnd_scu_enable_ssi_irq()

Current R-Car sound driver is assuming that
SCU mod is used even though it is not needed.
Because scu.c is controlling SSIU too.
(it is Gen1 compatibility)
But, SCU mod will be really not used if new platform dai
feature was used.
Thus, SSIU irq setting is called from SSI
directory by this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit b8cc41e9e8cc5beec9dcbe044cfc44aa0325d9e6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: Get correct SCU ID

Current rsnd driver is assuming that SCU/SRU ID is
same as SSIU/SSI ID, because Gen1 can't select it.
But, Gen2 can select it.
The SCU/SRU/SSIU/SSI pair depends on the platform.
This patch get correct SCU ID from platform info.
To keep compatible, it still assuming SCU ID = SSI ID
if platform doesn't have info

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 389933d9f6e55a1ef3a71549c36f6283b9f8c145)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: add struct rsnd_dai_platform_info

R-Car sound DAI consists from SSI/SCU/SSIU/SRU...
Current R-Car sound DAI is decided from these settings,
but it is intuitively unclear, and is not good design for DT support.
This patch adds new rsnd_dai_platform_info to solve this issue.

But now, many platform is using this driver without
rsnd_dai_platform_info.
So, this patch still supports DAI settings via SSI to keep compatible.
It will be removed in next Linux version.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 78f13d0c5a2888564b2bed7f8433c8ec889997ff)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: share reg_field and reduce memory

Gen1/Gen2 code never be used in same time.
Thus, driver can share Gen1 only register and Gen2 only register.
It can reduce memory too.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit c82e1c8874e5abaf52f9ed886386cbe08ec98a5b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: modify rsnd_adg_ssi_ws_timing_gen2() parameter

rsnd_adg_ssi_ws_timing_gen2() returns SSI WS timing,
and it used "mod" as parameter.
but, this "mod" is sometimes not ssi mod.
Get SSI mod from rsnd_dai_stream

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 8467dedc9dae3630a2ede49a43120af3ed54ba19)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove unused SSI_CONTROL

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 685fb3eb31445bd872ab30ae301404b2cac7cd75)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: use function pointer for each probe

R-Car sound consists of many devices.
It will have more device support in the future.
Thus, for each probe become now function pointer array.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit d1ac970f5de94bef9e094b46f016899d04e8178b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: use devm_clk_get() instead of clk_get()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 468be93eb4e28c5710ed8acc1b938937707e537c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: get ssi/scu from rsnd_dai_stream

Current driver is assuming that SSI id = SCU id.
But, now, it can get correct SSI/SCU from
rsnd_dai_stream. use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 374e5426377604a94d672650ef22dd2b4285de17)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: use mod array instead of list on rdai

struct rsnd_dai_stream used list for mod list.
It added only odd flexibility to current driver, and
it is a factor which makes extendibility difficult.
rsnd use mod array instead of list from now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit a126021d144bae88a563db2b57b0ad5eb1ee66d9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: run rsnd_path_init() when probe() timing

Current rsnd SSIU/SSI/SCU/SRU path is set
when playback/capture starts up.
But it is meaningless method, since the path is based
on platform and can be set in probe() timing.
This patch sets the path on probe() timing.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 9bfed6cf4fa2cd2c5e80431244348b0c5d933cf5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: tidyup RSND_SSI_xxx flags

6f3ab6c1c022e7a4877d38940cd45ae7804a15e2
(ASoC: rsnd: remove pin sync option)
added unused RSND_SSI_CLK_FROM_ADG flag.
It should remove RSND_SSI_SYNC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 697dce94ed37e0653e5bba593f11e2b14877cd63)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: unify rdai naming

struct rsnd_dai is called as "rdai",
but its size has been called as "dai_nr".
Unify these as "rdai"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ecba9e724c5775aebd3a28e831643160c7146e83)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove verbose debug message from scu/ssi

scu/ssi probe() already have more detail debug message.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 98455ed5ddbfbcbcd0adb300c6cb1964ed0a6931)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove verbose function parameter

priv has rcar_snd_info pointer.
having priv and info in same time is verbose.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 5da39cf30454bbf3e92f56935e7d137e5bd2c830)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: move rsnd_mod_call() macro

core.c is the only user of rsnd_mod_call() macro.
Move it to core.c from rsnd.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit d870a91e9d0eae524ac2da7cbdc7e399a71b86c4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: move priv member settings to upper side

There is no big meaning, but preparation for platform dai support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 498480731e232d7c9a96a338924b5a275121e091)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: print error if there is SRC settings mismatch

rsnd request clock master if SRC is used

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit a2070feede404484296aace813b6c518582a3f8e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: set DIV_EN register on rsnd_adg_set_convert_clk_gen2()

DIV_EN register enable bit is required when you use Gen2 SRC

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ee2c828d21b2381c813df257235d3c635269e435)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: tidyup original for_each_rsnd_xxx macro

Current for_each_rsnd_xxx macro will read out-of-array's
memory after last loop operation.
It was not good C language operation, and the binary which was
compiled by (at least) gcc 4.8.1 is broken
This patch tidyup these issues

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 00463c113b6ba6506b4f1ebb9b3c5dd249f8750f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: use device dependency clock

Current R-Car sound driver is using device
independent audio clock, but it is not good
design for DT support.
This patch adds device dependent clock support.
But, there are some platform which is using
independent audio clock.
It is still supported at this point,
but it will be removed soon.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 8691d0748e566f8708f7a9139e760134f5dc3130)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: add Gen2 SRC and DMAEngine support

Renesas sound Gen2 has SRC (= Sampling Rate Converter)
which needs 2 DMAC.
The data path image when you use SRC on Gen2 is

[mem] -> Audio-DMAC -> SRC -> Audio-DMAC-peri-peri -> SSIU -> SSI

This patch support SRC and DMAEnine.
It is tested on R-Car H2 Lager board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 629509c5bc478c0343d94c8c70812396f44447fb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: rsnd_ssi_probe() goes forwarder than rsnd_scu_probe()

rsnd_ssi_probe() goes forwarder than rsnd_scu_probe(),
since scu will need ssi information on Gen2

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit eb854f6dff24a59378acc8d8eda57a3543a25acc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove SSI dependent DMAEngine callback

Renesas Gen2 sound will use 2 DMAC
which are Audio-DMAC, and Audio-DMAC-peri-peri.
Current driver has callback function for each DMAC,
because it assumed each DMAC needs special settings.
But it became clear that these can share settings.
This patch removes unnecessary callback

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 4686a0ad9aaee89495f181e5755d153e7fe7ffe6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: extracts Gen1/Gen2 common parts

Renesas sound IP Gen1/Gen2 are similar, but different.
This patch extracts Gen1/Gen2 common and dependency parts,
and create Gen1/Gen2 ops to control it.

According to this structure, SSIU setup which
has been implemented on ssi.c can be moved to scu.c
(SRU/SSIU/SCU should be implemented on scu.c)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 1b7b08efbe7419cc3e082f2b5ec8ae89f7af43d1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: add rsnd_ssi_is_play()

SCU needs SSI direction if Gen2.
Add rsnd_ssi_is_play() function for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 32f27ebf9b625df610c12408ea15bae37be75eaf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: merge SRC clock timing/setting

SRC clock and timing setting register
exist in SRU and ADG on Gen1.
But, these are merged into ADG on Gen2.
Current driver is supporting Gen1 SRC only
at this point, but, above settings are
set as different function.
This patch merges these as preparation of Gen2 support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 28dc4b63cdb96f2448a677320fcc0eb112e13e3f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: rsnd_scu_hpbif_is_enable() become macro

rsnd_scu_hpbif_is_enable() is used only scu.c now.
It can be local macro

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 96c7c0d6f8c6e09e9123f0518130c047c5de40f6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: Merge macros in scu.c

Merge #define lines, since these are defined
in the scattering place

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 39cf3c4064b8db25efe501fec8e3c48a578b4b58)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: clarify scu.c area

scu.c cares SRU(Gen1) / SCU(Gen2) / SSIU(Gen2)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit c926b746055adfd915936c67244e635e9c7a3d84)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: SCU should be called before SSI

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit be213ac1af893410eb8256010edf136b4099e827)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: don't use schedule_work() when rsnd_dma_start()

rsnd_dma_start() is the function to start DMAEngine.
Current code is using schedule_work() for it,
but it breaks DMAC/SSI register setting timing.
Don't use schedule_work() on it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit f5cab3b8976d59c6166228874a5af3d87c94c723)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: fixup Gen2 module naming

Gen2 has SCU, not SRU

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 64de62b38641dec05905930024133726c540040e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: non 0 is error on probe

Some xxx_probe() returns not only -Exx, but also PTR_ERR().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 106d2eff563b2abdb34872cb8ec7b19766edaffc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove duplicate *priv from rsnd_dma

*priv pointer exists under rsnd_mod,
and, it can get rsnd_mod pointer from rsnd_dma.
remove duplicate rsnd_dma :: priv

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 9b5ab573a81b9ac0df90b74d732651fdf8b24525)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: explain SRC bypass mode settings in comment

SRC bypass mode is useful for debugging.
This patch explains SRC bypass mode settings in comment

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 41c6221c39accdc4fe2b0c0fa196b6302b704e57)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: rename rsnd_scu_convert_rate_ctrl()

rsnd_scu_convert_rate_ctrl() is unclear naming,
and there is "rsnd_scu_convert_rate" variable.
These are confusable.
it renamed to rsnd_scu_set_convert_rate()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit f80e1c96339a45992b5dded0474288e52bd3b18d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: rsnd: remove ssiu from ssi.c

Now, SSI_MODE0/1 are controlled under scu.c
ssiu is no longer needed on ssi.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit dd27d808f9e084e7e9c4719c17f17d1fa35c45a6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>