drm/msm: Disallow relocs on a6xx+

Mesa stopped using these pretty early in a6xx bringup[1].  Take advantage
of this to disallow some legacy UABI.

[1] https://gitlab.freedesktop.org/mesa/mesa/-/commit/7ef722861b691ce99be3827ed05f8c0ddf2cd66e

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/551175/

drm/msm/a6xx: Fix GMU lockdep splat

For normal GPU devfreq, we need to acquire the GMU lock while already
holding devfreq locks.  But in the teardown path, we were calling
dev_pm_domain_detach() while already holding the GMU lock, resulting in
this lockdep splat:

   ======================================================
   WARNING: possible circular locking dependency detected
   6.4.3-debug+ #3 Not tainted
   ------------------------------------------------------
   ring0/391 is trying to acquire lock:
   ffffff80a025c078 (&devfreq->lock){+.+.}-{3:3}, at: qos_notifier_call+0x30/0x74

   but task is already holding lock:
   ffffff809b8c1ce8 (&(c->notifiers)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x34/0x78

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #4 (&(c->notifiers)->rwsem){++++}-{3:3}:
          down_write+0x58/0x74
          __blocking_notifier_chain_register+0x64/0x84
          blocking_notifier_chain_register+0x1c/0x28
          freq_qos_add_notifier+0x5c/0x7c
          dev_pm_qos_add_notifier+0xd4/0xf0
          devfreq_add_device+0x42c/0x560
          devm_devfreq_add_device+0x6c/0xb8
          msm_devfreq_init+0xa8/0x16c [msm]
          msm_gpu_init+0x368/0x54c [msm]
          adreno_gpu_init+0x248/0x2b0 [msm]
          a6xx_gpu_init+0x2d0/0x384 [msm]
          adreno_bind+0x264/0x2bc [msm]
          component_bind_all+0x124/0x1f4
          msm_drm_bind+0x2d0/0x5f4 [msm]
          try_to_bring_up_aggregate_device+0x88/0x1a4
          __component_add+0xd4/0x128
          component_add+0x1c/0x28
          dp_display_probe+0x37c/0x3c0 [msm]
          platform_probe+0x70/0xc0
          really_probe+0x148/0x280
          __driver_probe_device+0xfc/0x114
          driver_probe_device+0x44/0x100
          __device_attach_driver+0x64/0xdc
          bus_for_each_drv+0xb0/0xd8
          __device_attach+0xe4/0x140
          device_initial_probe+0x1c/0x28
          bus_probe_device+0x44/0xb0
          deferred_probe_work_func+0xb0/0xc8
          process_one_work+0x288/0x3d8
          worker_thread+0x1f0/0x260
          kthread+0xf0/0x100
          ret_from_fork+0x10/0x20

   -> #3 (dev_pm_qos_mtx){+.+.}-{3:3}:
          __mutex_lock+0xc8/0x388
          mutex_lock_nested+0x2c/0x38
          dev_pm_qos_remove_notifier+0x3c/0xc8
          genpd_remove_device+0x40/0x11c
          genpd_dev_pm_detach+0x88/0x130
          dev_pm_domain_detach+0x2c/0x3c
          a6xx_gmu_remove+0x44/0xdc [msm]
          a6xx_destroy+0x7c/0xa4 [msm]
          adreno_unbind+0x50/0x64 [msm]
          component_unbind+0x44/0x64
          component_unbind_all+0xb4/0xbc
          msm_drm_uninit.isra.0+0x124/0x17c [msm]
          msm_drm_bind+0x340/0x5f4 [msm]
          try_to_bring_up_aggregate_device+0x88/0x1a4
          __component_add+0xd4/0x128
          component_add+0x1c/0x28
          dp_display_probe+0x37c/0x3c0 [msm]
          platform_probe+0x70/0xc0
          really_probe+0x148/0x280
          __driver_probe_device+0xfc/0x114
          driver_probe_device+0x44/0x100
          __device_attach_driver+0x64/0xdc
          bus_for_each_drv+0xb0/0xd8
          __device_attach+0xe4/0x140
          device_initial_probe+0x1c/0x28
          bus_probe_device+0x44/0xb0
          deferred_probe_work_func+0xb0/0xc8
          process_one_work+0x288/0x3d8
          worker_thread+0x1f0/0x260
          kthread+0xf0/0x100
          ret_from_fork+0x10/0x20

   -> #2 (&a6xx_gpu->gmu.lock){+.+.}-{3:3}:
          __mutex_lock+0xc8/0x388
          mutex_lock_nested+0x2c/0x38
          a6xx_gpu_set_freq+0x38/0x64 [msm]
          msm_devfreq_target+0x170/0x18c [msm]
          devfreq_set_target+0x90/0x1e4
          devfreq_update_target+0xb4/0xf0
          update_devfreq+0x1c/0x28
          devfreq_monitor+0x3c/0x10c
          process_one_work+0x288/0x3d8
          worker_thread+0x1f0/0x260
          kthread+0xf0/0x100
          ret_from_fork+0x10/0x20

   -> #1 (&df->lock){+.+.}-{3:3}:
          __mutex_lock+0xc8/0x388
          mutex_lock_nested+0x2c/0x38
          msm_devfreq_get_dev_status+0x4c/0x104 [msm]
          devfreq_simple_ondemand_func+0x5c/0x128
          devfreq_update_target+0x68/0xf0
          update_devfreq+0x1c/0x28
          devfreq_monitor+0x3c/0x10c
          process_one_work+0x288/0x3d8
          worker_thread+0x1f0/0x260
          kthread+0xf0/0x100
          ret_from_fork+0x10/0x20

   -> #0 (&devfreq->lock){+.+.}-{3:3}:
          __lock_acquire+0xdf8/0x109c
          lock_acquire+0x234/0x284
          __mutex_lock+0xc8/0x388
          mutex_lock_nested+0x2c/0x38
          qos_notifier_call+0x30/0x74
          qos_min_notifier_call+0x1c/0x28
          notifier_call_chain+0xf4/0x114
          blocking_notifier_call_chain+0x4c/0x78
          pm_qos_update_target+0x184/0x190
          freq_qos_apply+0x4c/0x64
          apply_constraint+0xf8/0xfc
          __dev_pm_qos_update_request+0x138/0x164
          dev_pm_qos_update_request+0x44/0x68
          msm_devfreq_boost+0x40/0x70 [msm]
          msm_devfreq_active+0xc0/0xf0 [msm]
          msm_gpu_submit+0xc8/0x12c [msm]
          msm_job_run+0x88/0x128 [msm]
          drm_sched_main+0x240/0x324 [gpu_sched]
          kthread+0xf0/0x100
          ret_from_fork+0x10/0x20

   other info that might help us debug this:
   Chain exists of:
     &devfreq->lock --> dev_pm_qos_mtx --> &(c->notifiers)->rwsem
    Possible unsafe locking scenario:
          CPU0                    CPU1
          ----                    ----
     rlock(&(c->notifiers)->rwsem);
                                  lock(dev_pm_qos_mtx);
                                  lock(&(c->notifiers)->rwsem);
     lock(&devfreq->lock);

    *** DEADLOCK ***
   4 locks held by ring0/391:
    #0: ffffff809c811170 (&gpu->lock){+.+.}-{3:3}, at: msm_job_run+0x7c/0x128 [msm]
    #1: ffffff809c811208 (&gpu->active_lock){+.+.}-{3:3}, at: msm_gpu_submit+0xa8/0x12c [msm]
    #2: ffffffecbbb46600 (dev_pm_qos_mtx){+.+.}-{3:3}, at: dev_pm_qos_update_request+0x38/0x68
    #3: ffffff809b8c1ce8 (&(c->notifiers)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x34/0x78

   stack backtrace:
   CPU: 6 PID: 391 Comm: ring0 Not tainted 6.4.3debug+ #3
   Hardware name: Google Villager (rev1+) with LTE (DT)
   Call trace:
    dump_backtrace+0xb4/0xf0
    show_stack+0x20/0x30
    dump_stack_lvl+0x60/0x84
    dump_stack+0x18/0x24
    print_circular_bug+0x1cc/0x234
    check_noncircular+0x78/0xac
    __lock_acquire+0xdf8/0x109c
    lock_acquire+0x234/0x284
    __mutex_lock+0xc8/0x388
    mutex_lock_nested+0x2c/0x38
    qos_notifier_call+0x30/0x74
    qos_min_notifier_call+0x1c/0x28
    notifier_call_chain+0xf4/0x114
    blocking_notifier_call_chain+0x4c/0x78
    pm_qos_update_target+0x184/0x190
    freq_qos_apply+0x4c/0x64
    apply_constraint+0xf8/0xfc
    __dev_pm_qos_update_request+0x138/0x164
    dev_pm_qos_update_request+0x44/0x68
    msm_devfreq_boost+0x40/0x70 [msm]
    msm_devfreq_active+0xc0/0xf0 [msm]
    msm_gpu_submit+0xc8/0x12c [msm]
    msm_job_run+0x88/0x128 [msm]
    drm_sched_main+0x240/0x324 [gpu_sched]
    kthread+0xf0/0x100
    ret_from_fork+0x10/0x20

Fix this by only synchronizing access to gmu->initialized.

Fixes: 4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer")
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/551171/

drm/msm/a2xx: Call adreno_gpu_init() earlier

The adreno_is_a20x() and adreno_is_a225() functions rely on the
GPU revision, but such information is retrieved inside adreno_gpu_init(),
which is called afterwards.

Fix this problem by caling adreno_gpu_init() earlier, so that
the GPU information revision is available when adreno_is_a20x()
and adreno_is_a225() run.

Tested on a imx53-qsb board.

Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543456/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Fix up GMU region reservations

Change the order of region allocations to make the addresses match
downstream. This shouldn't matter very much, but helps eliminate one
more difference when comparing register accesses.

Also, make the log region 16K long. That's what it is, unconditionally
on A6xx and A7xx.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543338/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Improve GMU force shutdown sequence

The GMU force shutdown sequence involves some additional register cleanup
which was not implemented previously. Do so.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543340/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Ensure clean GMU state in a6xx_gmu_fw_start

While it's not very well understood, there is some sort of a fault
handler implemented in the GMU firmware which triggers when a certain
bit is set, resulting in the M3 core not booting up the way we expect
it to.

Write a magic value to a magic register to hopefully prevent that
from happening.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543335/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Skip empty protection ranges entries

Some specific SKUs leave certain protection range registers empty.
Allow for that behavior.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543334/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Use descriptive bitfield names for CP_PROTECT_CNTL

We have the necessary information, so explain which bit does what.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543332/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add some missing header definitions

Add a definition of the GMU_AHB_FENCE_STATUS_CLR reg and CP_PROTECT_CNTL
bitfields.

This may be substituted with a mesa header sync.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543330/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Fix misleading comment

The range is actually len+1.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/545099/

drm/msm/adreno: Switch to chip-id for identifying GPU

Since the revision becomes an opaque identifier with future GPUs, move
away from treating different ranges of bits as having a given meaning.
This means that we need to explicitly list different patch revisions in
the device table.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549782/

dt-bindings: drm/msm/gpu: Extend bindings for chip-id

Upcoming GPUs use an opaque chip-id for identifying the GPU.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/549778/

drm/msm/adreno: Move adreno info to config

Let's just stash it in adreno_platform_config rather than looking it up
in N different places.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549777/

drm/msm/adreno: Add helper for formating chip-id

This is used in a few places, including one that is parsed by userspace
tools.  So let's standardize it a bit better.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549774/

drm/msm/adreno: Add adreno family

Sometimes it is useful to know the sub-generation (or "family").  And in
any case, this helps us get away from infering the generation from the
numerical chip-id.

v2: Fix is_a2xx() typo

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549773/

drm/msm/adreno: Bring the a630 family together

All of these are derivatives of a630.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549770/

drm/msm/adreno: Move speedbin mapping to device table

This simplifies the code.

v2: Use a table of structs instead of flat uint32_t[]

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549769/

drm/msm/adreno: Allow SoC specific gpu device table entries

There are cases where there are differences due to SoC integration.
Such as cache-coherency support, and (in the next patch) e-fuse to
speedbin mappings.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549767/

drm/msm/adreno: Use quirk to identify cached-coherent support

It is better to explicitly list it.  With the move to opaque chip-id's
for future devices, we should avoid trying to infer things like
generation from the numerical value.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549765/

drm/msm/adreno: Use quirk identify hw_apriv

Rather than just open coding a list of gpu-id matches.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549764/

drm/msm/adreno: Remove redundant revn param

This just duplicates what is in adreno_info, and can cause confusion if
used before it is set.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549761/

drm/msm/adreno: Remove redundant gmem size param

Even in the ocmem case, the allocated ocmem buffer size should match the
requested size.

v2: Move stray hunk to previous patch, make OCMEM size mismatch an error
    condition.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549759/

drm/msm/adreno: Remove GPU name

No real need to have marketing names in the kernel.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549757/

Merge branch 'msm-fixes' into msm-next

Back-merge msm-fixes to resolve conflicts.

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_done

Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: initialise clk_rate to 0 in _dpu_core_perf_get_core_clk_rate

When removing the core perf tune overrides, I also occasionaly removed the
initialisation of the clk_rate variable. Initialise it to 0 to let max()
correctly calculate the maximum of requested clock rates.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 6a4bc73915af ("drm/msm/dpu: drop separate dpu_core_perf_tune overrides")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551321/
Link: https://lore.kernel.org/r/20230804094804.36053-1-dmitry.baryshkov@linaro.org

drm/msm/dpu: clean up some inconsistent indenting

No functional modification involved.

drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:183 dpu_core_perf_crtc_check() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6096
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/551313/
Link: https://lore.kernel.org/r/20230804075746.77435-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: Don't leak some plane state

Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state->commit refcount a few years ago
in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")

Fix it by using the right helpers.

Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Drop encoder vsync_event

Drop vsync_event and vsync_event_work handlers as they are unnecessary.
In addition drop the dpu_enc_ktime_template event class as it will be
unused after the vsync_event handlers are dropped.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550983/
Link: https://lore.kernel.org/r/20230802-encoder-cleanup-v2-1-5bfdec0ce765@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: fix DSC 1.2 enc subblock length

Both struct dpu_dsc_sub_blks instances declare enc subblock length to be
0x100, while the actual length is 0x9c (last register having offset 0x98).
Reduce subblock length to remove the empty register space from being
dumped.

Fixes: 0d1b10c63346 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550999/
Link: https://lore.kernel.org/r/20230802183655.4188640-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: fix DSC 1.2 block lengths

All DSC_BLK_1_2 declarations incorrectly pass 0x29c as the block length.
This includes the common block itself, enc subblocks and some empty
space around. Change that to pass 0x4 instead, the length of common
register block itself.

Fixes: 0d1b10c63346 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Reported-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/550998/
Link: https://lore.kernel.org/r/20230802183655.4188640-1-dmitry.baryshkov@linaro.org

drm/msm/dpu: increase memtype count to 16 for sm8550

sm8550 has 16 vbif clients.

This fixes the extra 2 clients (DMA4/DMA5) not having their memtype
initialized. This fixes DMA4/DMA5 planes not displaying correctly.

Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/550968/
Link: https://lore.kernel.org/r/20230802134900.30435-1-jonathan@marek.ca
[DB: fixed the Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop dpu_core_perf_destroy()

This function does nothing, just clears one struct field. Drop it now.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550210/
Link: https://lore.kernel.org/r/20230730010102.350713-11-dmitry.baryshkov@linaro.org

drm/msm/dpu: move max clock decision to dpu_kms.

dpu_core_perf should not make decisions on the maximum possible core
clock rate. Pass the value from dpu_kms_hw_init() and drop handling of
core_clk from dpu_core_perf.c

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550201/
Link: https://lore.kernel.org/r/20230730010102.350713-10-dmitry.baryshkov@linaro.org

drm/msm/dpu: remove extra clk_round_rate() call

The dev_pm_opp_set_rate() already contains a call for clk_round_rate for
the passed value. Stop calling it manually from
_dpu_core_perf_get_core_clk_rate(). It is slightly incorrect to call it
this way, as we should round the final calculated clock rate rather than
rounding all the intermediate values.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550212/
Link: https://lore.kernel.org/r/20230730010102.350713-9-dmitry.baryshkov@linaro.org

drm/msm/dpu: remove unused fields from struct dpu_core_perf

Remove dpu_core_perf::dev and dpu_core_perf::debugfs_root fields, they
are not used by the code.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550200/
Link: https://lore.kernel.org/r/20230730010102.350713-8-dmitry.baryshkov@linaro.org

drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code

Simplify dpu_core_perf code by using only dpu_perf_cfg instead of using
full-featured catalog data.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550198/
Link: https://lore.kernel.org/r/20230730010102.350713-7-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop the dpu_core_perf_crtc_update()'s stop_req param

The stop_req is true only in the dpu_crtc_disable() case, when
crtc->enable has already been set to false. This renders the stop_req
argument useless. Remove it completely.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550206/
Link: https://lore.kernel.org/r/20230730010102.350713-6-dmitry.baryshkov@linaro.org

drm/msm/dpu: rework indentation in dpu_core_perf

dpu_core_perf.c contains several multi-line conditions which are hard to
comprehent because of the indentation. Rework the identation of these
conditions to make it easier to understand them.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550197/
Link: https://lore.kernel.org/r/20230730010102.350713-5-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop separate dpu_core_perf_tune overrides

The values in struct dpu_core_perf_tune are fixed per the core perf
mode. Drop the 'tune' values and substitute them with known values when
performing perf management.

Note: min_bus_vote was not used at all, so it is just silently dropped.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550208/
Link: https://lore.kernel.org/r/20230730010102.350713-4-dmitry.baryshkov@linaro.org

drm/msm/dpu: bail from _dpu_core_perf_crtc_update_bus if there are no ICC paths

Skip bandwidth aggregation and return early if there are no interconnect
paths defined for the DPU device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550195/
Link: https://lore.kernel.org/r/20230730010102.350713-3-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop enum dpu_core_perf_data_bus_id

Drop the leftover of bus-client -> interconnect conversion, the enum
dpu_core_perf_data_bus_id.

Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550194/
Link: https://lore.kernel.org/r/20230730010102.350713-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop BWC features from DPU_MDP_foo namespace

The feature bits DPU_MDP_BWC, DPU_MDP_UBWC_1_0, and DPU_MDP_UBWC_1_5 are
not used by the driver, drop them completely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550056/
Link: https://lore.kernel.org/r/20230728213320.97309-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop UBWC configuration

As the DPU driver has switched to fetching data from MDSS driver, we can
now drop the UBWC and highest_bank_bit parts of the DPU hw catalog.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550058/
Link: https://lore.kernel.org/r/20230728213320.97309-7-dmitry.baryshkov@linaro.org

drm/msm/dpu: use MDSS data for programming SSPP

Switch to using data from MDSS driver to program the SSPP fetch and UBWC
configuration. As a side-effect, this also swithes the DPU driver from
DPU_HW_UBWC_VER_xx values to the UBWC_x_y enum, which reflects
the hardware register values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550054/
Link: https://lore.kernel.org/r/20230728213320.97309-6-dmitry.baryshkov@linaro.org

drm/msm/mdss: populate missing data

As we are going to use MDSS data for DPU programming, populate missing
MDSS data. The UBWC 1.0 and no UBWC cases do not require MDSS
programming, so skip them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550055/
Link: https://lore.kernel.org/r/20230728213320.97309-5-dmitry.baryshkov@linaro.org

drm/msm/mdss: export UBWC data

DPU programming requires knowledge of some of UBWC parameters. This
results in duplication of UBWC data between MDSS and DPU drivers. Export
the required data from MDSS driver.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550052/
Link: https://lore.kernel.org/r/20230728213320.97309-4-dmitry.baryshkov@linaro.org

drm/msm/mdss: rename ubwc_version to ubwc_enc_version

Rename the ubwc_version field to ubwc_enc_version, it denotes the
version of the UBWC encoder, not the "UBWC version".

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550051/
Link: https://lore.kernel.org/r/20230728213320.97309-3-dmitry.baryshkov@linaro.org

drm/msm/mdss: correct UBWC programming for SM8550

The SM8550 platform employs newer UBWC decoder, which requires slightly
different programming.

Fixes: a2f33995c19d ("drm/msm: mdss: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550049/
Link: https://lore.kernel.org/r/20230728213320.97309-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop compatibility INTR defines

While reworking interrupts masks, it was easier to keep old
MDP_INTFn_7xxx_INTR and MDP_INTFn_7xxx_TEAR_INTR symbols. Now it is time
to drop them and use unified symbol names.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549656/
Link: https://lore.kernel.org/r/20230727144543.1483630-6-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop now-unused mdss_irqs field from hw catalog

Now as the list of the interrupts is constructed from the catalog
data, drop the mdss_irqs field from catalog.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549659/
Link: https://lore.kernel.org/r/20230727144543.1483630-5-dmitry.baryshkov@linaro.org

drm/msm/dpu: autodetect supported interrupts

Declaring the mask of supported interrupts proved to be error-prone. It
is very easy to add a bit with no corresponding backing block or to miss
the INTF TE bit. Replace this with looping over the enabled INTF blocks
to setup the irq mask.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549654/
Link: https://lore.kernel.org/r/20230727144543.1483630-4-dmitry.baryshkov@linaro.org

drm/msm/dpu: split interrupt address arrays

There is no point in having a single enum (and a single array) for both
DPU < 7.0 and DPU >= 7.0 interrupt registers. Instead define a single
enum and two IRQ address arrays.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: c7314613226a0 ("drm/msm: Add missing struct identifier")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549653/
Link: https://lore.kernel.org/r/20230727144543.1483630-3-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline __intr_offset

Inline __intr_offset(), there is no point in having a separate oneline
function for setting base block address.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549655/
Link: https://lore.kernel.org/r/20230727144543.1483630-2-dmitry.baryshkov@linaro.org

drm/msm: Remove redundant DRM_DEV_ERROR()

There is no need to call the DRM_DEV_ERROR() function directly to print
a custom message when handling an error from platform_get_irq() function
as it is going to display an appropriate error message
in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549499/
Link: https://lore.kernel.org/r/20230727112407.2916029-1-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: mdss-common: add memory-region property

Add and document the reserved memory region property in the
mdss-common schema.

For now (sdm845-db845c), it points to a framebuffer memory
region reserved by the bootloader for splash screen.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549376/
Link: https://lore.kernel.org/r/20230726132719.2117369-1-amit.pundir@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125

SM6125 features only a single PHY (despite a secondary PHY PLL source
being available to the disp_cc_mdss_pclk0_clk_src clock), and downstream
sources for this "trinket" SoC do not define the typical "vcca"
regulator to be available nor used.  This, including the register offset
is identical to QCM2290, whose config struct can trivially be reused.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548980/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-13-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant

Document availability of the 14nm DSI PHY on SM6125.  Note that this
compatible uses the SoC-suffix variant, intead of postfixing an
arbitrary number without the sm/sdm portion.  The PHY is not powered by
a vcca regulator like on most SoCs, but by the MX power domain that is
provided via the power-domains property and a single corresponding
required-opps.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548979/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-12-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdss: Add SM6125 support

SM6125 has an UBWC 3.0 decoder but only an UBWC 1.0 encoder.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548974/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-11-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add SM6125 support

Add definitions for the display hardware used on the Qualcomm SM6125
platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548978/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-10-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add SM6125 MDSS

Document the SM6125 MDSS.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548976/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-9-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: sc7180-dpu: Describe SM6125

SM6125 is identical to SM6375 including the throttle clock that is also
provided to the MDP node downstream.  Note that any SoC other than
SM6375 (currently SC7180 and SM6350) has an unconstrained maximum number
of clocks and could either pass or leave out this "throttle" clock.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548972/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-8-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: dsi-controller-main: Document SM6125

Document general compatibility of the DSI controller on SM6125.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548968/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-7-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: clock: qcom, dispcc-sm6125: Allow power-domains property

On SM6125 the dispcc block is gated behind VDDCX: allow this domain to
be configured.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548970/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-6-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: clock: qcom, dispcc-sm6125: Require GCC PLL0 DIV clock

The "gcc_disp_gpll0_div_clk_src" clock is consumed by the driver, will
be passed from DT, and should be required by the bindings.

Fixes: 8397c9c0c26b ("dt-bindings: clock: add QCOM SM6125 display clock bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548966/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-5-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example

Both SM6350 and SM6375 support only a single DSI link, and don't have a
corresponding dsi1 node in DTS.  Their examples should not suggest an
output interface port on the display-controller node to this inexistant
DSI host, with a dsi1_in label reference that doesn't exist in the
example either.

Fixes: 3b7502b0c205 ("dt-bindings: display/msm: Add SM6350 MDSS")
Fixes: 2a5c1021bc77 ("dt-bindings: display/msm: Add SM6375 MDSS")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/548961/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-4-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config

The regulator setup was likely copied from other SoCs by mistake.  Just
like SM6125 the DSI PHY on this platform is not getting power from a
regulator but from the MX power domain.

Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548959/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-1-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop DPU_INTF_DATA_COMPRESS from dpu catalog

Now that all usages of DPU_INTF_DATA_COMPRESS have been replaced
with the dpu core's major revision lets drop DPU_INTF_DATA_COMPRESS
from the catalog completely.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546808/
Link: https://lore.kernel.org/r/20230712012003.2212-6-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename enable_compression() to program_intf_cmd_cfg()

Rename the intf's enable_compression() op to program_intf_cmd_cfg()
and allow it to accept a struct intf_cmd_mode_cfg to program
all the bits at once. This can be re-used by widebus later on as
well as it touches the same register.

changes in v5:
- rename struct intf_cmd_mode_cfg to dpu_hw_intf_cmd_mode_cfg
- remove couple of comments

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546806/
Link: https://lore.kernel.org/r/20230712012003.2212-5-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename all hw_intf structs to have dpu_hw prefix

dpu_hw_intf has a few instances of structs which do not have
the dpu_hw prefix. Lets fix this by renaming those structs
and updating the usage of those accordingly.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546805/
Link: https://lore.kernel.org/r/20230712012003.2212-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use dpu core's major version to enable data compress

Instead of using a feature bit to decide whether to enable data
compress or not for DSC use-cases, use dpu core's major version
instead by assigning the enable_compression op based on the
dpu core's major version.

To make this possible pass the struct dpu_mdss_version to
dpu_hw_intf_init().

This will avoid defining feature bits for every bit level details of
registers.

changes in v5:
- none

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546803/
Link: https://lore.kernel.org/r/20230712012003.2212-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: re-introduce dpu core revision to the catalog

Introduce the dpu core revision back as an entry to the catalog so that
we can just use dpu revision checks and enable those bits which
should be enabled unconditionally and not controlled by a catalog
and also simplify the changes to do something like:

if (dpu_core_revision > xxxxx && dpu_core_revision < xxxxx)
   enable the bit;

changes in v5:
- fix the commit text to remove instances of DPU_HW_VER

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546801/
Link: https://lore.kernel.org/r/20230712012003.2212-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Enable BURST_MODE for command mode for DSI 6G v1.3+

During a frame transfer in command mode, there could be frequent
LP11 <-> HS transitions when multiple DCS commands are sent mid-frame or
if the DSI controller is running on slow clock and is throttled. To
minimize frame latency due to these transitions, it is recommended to
send the frame in a single burst.

This feature is supported for DSI 6G 1.3 and above, thus enable burst
mode if supported.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/544551/
Link: https://lore.kernel.org/r/20230608-b4-add-burst-mode-v2-1-2ff468457d46@quicinc.com
[DB: fixed indentation]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: dp-controller: document SM8250 compatible

It looks like DP controlled on SM8250 is the same as DP controller on
SM8350. Use the SM8350 compatible as fallback for SM8250.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546242/
Link: https://lore.kernel.org/r/20230709041926.4052245-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: Update dev core dump to dump registers of sub-blocks

Currently, the device core dump mechanism does not dump registers of
sub-blocks within the DSPP, SSPP, DSC, and PINGPONG blocks. Edit
dpu_kms_mdp_snapshot function to account for sub-blocks.

Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546192/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-6-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Refactor printing of main blocks in device core dump

Currently, the names of main blocks are hardcoded into the
msm_disp_snapshot_add_block function rather than using the name that
already exists in the catalog. Change this to take the name directly from
the catalog instead of hardcoding it.

Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546194/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-5-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Remove redundant prefix/suffix in name of sub-blocks

For a device core dump, the registers of sub-blocks are printed under a
title formatted as <mainBlkName_sblkName>. For example, the csc sub-block
for an SSPP main block "sspp_0" would be printed "sspp_0_sspp_csc0". The
title is clearly redundant due to the duplicate "sspp" and "0" that exist
in both the mainBlkName and sblkName. To eliminate this redundancy, remove
the secondary "sspp" and "0" that exist in the sub-block name by
elimanting the "sspp_" prefix and the concatenation of "num" that results
in the redundant "0" suffix. Remove num parameter altogether from relevant
macros as a consequence of it no longer being used.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546198/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-4-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Define names for unnamed sblks

Some sub-blocks in the hw catalog have not been given a name, so when the
registers from that block are dumped, there is no name to reference.
Define names for relevant sub-blocks to fix this.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546199/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-3-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Drop unused num argument from relevant macros

Drop unused parameter "num" from VIG_SBLK_NOSCALE and DMA sub-block
macros. Update calls to relevant macros to reflect change.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546196/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-2-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Update dev core dump to not print backwards

Device core dump add block method adds hardware blocks to dumping queue
with stack behavior which causes the hardware blocks to be printed in
reverse order. Change the addition to dumping queue data structure
from "list_add" to "list_add_tail" for FIFO queue behavior.

Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546200/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Disallow submit with fence id 0

A fence id of zero is expected to be invalid, and is not removed from
the fence_idr table.  If userspace is requesting to specify the fence
id with the FENCE_SN_IN flag, we need to reject a zero fence id value.

Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/549180/

drm/msm: Fix hw_fence error path cleanup

In an error path where the submit is free'd without the job being run,
the hw_fence pointer is simply a kzalloc'd block of memory.  In this
case we should just kfree() it, rather than trying to decrement it's
reference count.  Fortunately we can tell that this is the case by
checking for a zero refcount, since if the job was run, the submit would
be holding a reference to the hw_fence.

Fixes: f94e6a51e17c ("drm/msm: Pre-allocate hw_fence")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/547088/

drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()

The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null
is catastrophic here, so we should use IS_ERR_OR_NULL() to check
the return value.

Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/547712/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Fix snapshot BINDLESS_DATA size

The incorrect size was causing "CP | AHB bus error" when snapshotting
the GPU state on a6xx gen4 (a660 family).

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/26
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state")
Patchwork: https://patchwork.freedesktop.org/patch/546763/

drm/msm/a690: Remove revn and name

These fields are deprecated.  But any userspace new enough to support
a690 also knows how to identify the GPU based on chip-id.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545552/

drm/msm/adreno: Fix warn splat for devices without revn

Recently, a WARN_ON() was introduced to ensure that revn is filled before
adreno_is_aXYZ is called. This however doesn't work very well when revn is
0 by design (such as for A635).

Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: cc943f43ece7 ("drm/msm/adreno: warn if chip revn is verified before being set")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/545554/

drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config

The regulator setup was likely copied from other SoCs by mistake.  Just
like SM6125 the DSI PHY on this platform is not getting power from a
regulator but from the MX power domain.

Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/544536/
Link: https://lore.kernel.org/r/20230627-sm6125-dpu-v2-1-03e430a2078c@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dpu: drop enum dpu_core_perf_data_bus_id

Drop the leftover of bus-client -> interconnect conversion, the enum
dpu_core_perf_data_bus_id.

Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546048/
Link: https://lore.kernel.org/r/20230707193942.3806526-2-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dpu: add missing flush and fetch bits for DMA4/DMA5 planes

Note that with this, DMA4/DMA5 are still non-functional, but at least
display *something* in modetest instead of nothing or underflow.

Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/545548/
Link: https://lore.kernel.org/r/20230704160106.26055-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/mdss: correct UBWC programming for SM8550

The SM8550 platform employs newer UBWC decoder, which requires slightly
different programming.

Fixes: a2f33995c19d ("drm/msm: mdss: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546934/
Link: https://lore.kernel.org/r/20230712121145.1994830-3-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dpu: drop empty features mask INTF_SDM845_MASK

The INTF_SDM845_MASK features mask is zero. Drop it completely.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545386/
Link: https://lore.kernel.org/r/20230704022136.130522-20-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop empty features mask MERGE_3D_SM8150_MASK

The MERGE_3D_SM8150_MASK features mask is zero. Drop it completely.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545384/
Link: https://lore.kernel.org/r/20230704022136.130522-19-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline INTF_BLK and INTF_BLK_DSI_TE macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545378/
Link: https://lore.kernel.org/r/20230704022136.130522-18-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline WB_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545380/
Link: https://lore.kernel.org/r/20230704022136.130522-17-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline various PP_BLK_* macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545371/
Link: https://lore.kernel.org/r/20230704022136.130522-16-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline MERGE_3D_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545382/
Link: https://lore.kernel.org/r/20230704022136.130522-15-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline DSC_BLK and DSC_BLK_1_2 macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545370/
Link: https://lore.kernel.org/r/20230704022136.130522-14-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline LM_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545362/
Link: https://lore.kernel.org/r/20230704022136.130522-13-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline DSPP_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545359/
Link: https://lore.kernel.org/r/20230704022136.130522-12-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline SSPP_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545377/
Link: https://lore.kernel.org/r/20230704022136.130522-11-dmitry.baryshkov@linaro.org