Yong Qin [Tue, 25 Sep 2018 07:59:28 +0000 (15:59 +0800)]
hdmirx: hdmirx driver for tl1 [1/1]
PD#172587
Problem:
hdmirx bringup for tl1
Solution:
1.modify write top api, add addr offset -qy
2.modify write edid api -qy
3.replace top hw reset api
4.add aocec access register idle -qy
5.for tl1 bypass sw eq -qy
6.replace pddq api -qy
7.modify arc control for tl1 -qy
8.add n/cts auto mode
9.add hdcp balance path
10.add sscp mode
11.optimize reg map(rm unused reg addr)
12.add recent commits from 4.9 trunk
13.modify top clk cntl bit definition
14.modify top offset addr handle(x4)
15.add audio pll setting -qy
16.update phy setting - qy
17.modify audio pll ctrl api for tl1 -qy
-add clk monitor function
-add clk stable api for tl1
18.add emp data to pfifo -qy
19.modify edid write and other function -qy
20.add emp data to ddr -qy
21.add tmds data to ddr -qy
22.add cec for tl1 -qy
-fix ctc 7-1
-add status register for cec a/b
23.add cec and hdmirx dts -qy
24.clean tl1 rx related clk measure
25.hdmirx and cec dts
Verify:
1.run PTM
2.need verify on chip
Change-Id: Ia7cc5a2d84925587bdfae825936ba763713926af
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
xuhua zhang [Tue, 9 Oct 2018 09:21:14 +0000 (17:21 +0800)]
vdin: add afbce function for tl1 [1/1]
PD#172587
Problem:
new added function for tl1
Solution:
add vdin afbce support for tl1
Verify:
verified on PTM
Change-Id: I5e3e2487b6cdbed2d2ca794a6a21ed885e4bf469
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
xuhua zhang [Sat, 29 Sep 2018 11:03:25 +0000 (19:03 +0800)]
tvin: add vdin and viu support for tl1 [1/1]
PD#172587
Problem:
do not suppoert for tl1
Solution:
add vdin and viu support for fl1
Verify:
verified on PTM
Change-Id: If4e267356fa666541853cfc7b49008795f9ec301
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
Nian Jing [Thu, 11 Oct 2018 08:10:43 +0000 (16:10 +0800)]
avin: add avin detect support for tl1 [1/1]
PD#172587
Problem:
do not suppoert for tl1
Solution:
add avin detect support for fl1
Verify:
just coding for tl1 will test later
Change-Id: I809f7068c9d0a45c89bd7dc4e6615db99b11f015
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Nian Jing [Fri, 12 Oct 2018 02:47:01 +0000 (10:47 +0800)]
vdac: vdac: add vdac support for tl1 [1/1]
PD#172587
Problem:
do not suppoert for tl1
Solution:
add vdac support for fl1
Verify:
test pass on local
Change-Id: I7b3da34289dfe0638a24b812658db7e462ebdd4c
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Xing Wang [Tue, 9 Oct 2018 11:36:05 +0000 (19:36 +0800)]
audio: auge: add sound card support for tl1 [1/1]
PD#172587
Problem:
Bringup tl1 sound card.
Solution:
Add tl1 sound card.
Add external interface for audio input/output.
Verify:
Tested by PTM
Sound card is setup.
TDM and SPDIF internel loopback is ok
Change-Id: I60830ca44a62ee2a8e16343e91e7311152cab161
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Brian Zhu [Mon, 22 Oct 2018 13:33:31 +0000 (21:33 +0800)]
amvideo: add amvideo support for tl1 [1/1]
PD#172587
Problem:
TL1 needs support amvideo driver.
Solution:
1. Add amvideo node into dts file, default enable.
2. Change the vd mif and sr reg offset.
3. Force bypass dolby vision function.
4. Change the register following hardware design.
5. Make amvideo afbc work for tl1.
Verify:
On PTM.
Change-Id: I0d857f8a707328383328daa23e6ba8e156c2e6e0
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
pengcheng chen [Fri, 28 Sep 2018 09:08:14 +0000 (17:08 +0800)]
osd: tl1: add osd support for tl1 [1/1]
PD#172587
Problem:
Bringup osd for TL1.
Solution:
Add osd support for TL1.
Add ge2d device tree node for TL1.
Verify:
Verified on PXP/PTM.
Change-Id: I3d20934f015108f545c3c72b979d1bd8187b282e
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Sat, 29 Sep 2018 09:32:14 +0000 (17:32 +0800)]
rdma: add rdma support for tl1 [1/1]
PD#172587
Problem:
Bringup rdma for TL1.
Solution:
Add rdma support for TL1.
Verify:
Verified on PXP/PTM.
Change-Id: I425edc1e47db2ea834fcc5acb0e3d0ee1f30a9f7
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Sat, 29 Sep 2018 09:06:05 +0000 (17:06 +0800)]
media: add codec support for tl1 [1/1]
PD#172587
Problem:
Bringup codec for TL1.
Solution:
Add codec iomap device tree node for TL1.
Add canvas device tree node for TL1.
Verify:
Verified on PXP/PTM.
Change-Id: I8b9a6645f1f9fd7d4aa9cae6166895e61ddc3e36
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
shihong.zheng [Tue, 2 Oct 2018 10:48:35 +0000 (18:48 +0800)]
arm: dts: tl1: add decoder device tree [3/3]
PD#174543
PD#172587
Problem:
new added function for tl1
Solution:
add vdin afbce support for tl1
Verify:
verified on PTM
Change-Id: I42054b8228161713ac10446491ebdb50a71975ad
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Evoke Zhang [Thu, 25 Oct 2018 07:21:19 +0000 (15:21 +0800)]
backlight: add support for tl1 [1/1]
PD#172587
Problem:
do not suppoert for tl1
Solution:
add backlight support for fl1
Verify:
verified on PTM
Change-Id: I052a7ef93ec9cb21a544e4823a4c9a339d38b5f9
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Thu, 27 Sep 2018 06:13:06 +0000 (14:13 +0800)]
lcd: add tl1 support [1/1]
PD#172587
Problem:
not support tl1
Solution:
add tl1 support
Verify:
test pass on PTM
Change-Id: I5a9073fc08a98ae95d4961297a7427864d92279b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Tue, 25 Sep 2018 02:19:41 +0000 (10:19 +0800)]
vpu: add support for tl1 [1/1]
PD#172587
Problem:
Bringup vpu for TL1.
Solution:
Add vpu support for TL1.
Verify:
Verified on PTM/PXP.
Change-Id: Ic2fb7682ddc1b21840e1be1d8462d4c0902e739d
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Bencheng Jing [Thu, 25 Oct 2018 12:42:16 +0000 (20:42 +0800)]
amvecm: fix flicker when change between Launcher and Signal Source [1/1]
PD#SWPL-848
Problem:
ioctrl set the same gamma value again
Solution:
if the gamma value is same as the ioctrl userspace value, do not set again
Verify:
txlx
Change-Id: I6f17f5ff234513c5a886004aedea81b9945c5b98
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Xingyu Chen [Mon, 27 Aug 2018 05:41:27 +0000 (13:41 +0800)]
pinctrl: fix some mistakes [1/1]
PD#172438
Problem:
1. return a negative when parsing the dts property
"output-high/output-low"
2. the prefix "bt565" don't meet corepinmux document
Solution:
1. add break statement in case PIN_CONFIG_OUTPUT to avoid
returning a negative value.
2. rename the "bt565" to "bt656" according to corepinmux document
Verify:
test pass on U200
Change-Id: Ieeb98367e2269007a6774592abac86ef05ee8f64
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Xingyu Chen [Thu, 18 Oct 2018 07:09:52 +0000 (15:09 +0800)]
irqchip: add a new gpio IRQ driver to support double-edge detection [1/1]
PD#SWPL-922
Problem:
the existing gpio IRQ driver(porting from the upstream) does not
double-edge detection
Solution:
add a new gpio IRQ driver to support the double-edge detection,
the new driver is with different software structure but compatible
with functions of the existing driver
Verify:
test pass on s400
Change-Id: Id69dd0b4459eef20a6755947c7d95a24d7b17fa9
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Tao Zeng [Mon, 29 Oct 2018 02:29:42 +0000 (19:29 -0700)]
Merge "audioinfo: fix kasan compile problem [1/1]" into amlogic-4.9-dev
MingLiang Dong [Mon, 22 Oct 2018 08:20:05 +0000 (04:20 -0400)]
amvecm: hdr: add hdr10 plus support [1/2]
PD#SWPL-869
Problem:
new feature, add hdr10 plus support
Solution:
1. add hdr10 plus metadat parser
2. add hdr10 plus code support
3. add hdr10 plus bypass mode
Verify:
verify on U200
Change-Id: I957954ce148021882e17f2913dd2552e64f1298c
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Blance Tang [Fri, 26 Oct 2018 06:15:14 +0000 (14:15 +0800)]
buildroot: Enable fb memory allocation in g12b_skt dts [1/1]
PD#SWPL-802
Problem:
Kernel crash when run GPU slt program
Solution:
Enable meson fb memory allocation in g12b_skt dts
Verify:
w400
Change-Id: I3074c2053cda06cf4ae237d24bad2c89d789f90d
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
Hanjie Lin [Fri, 26 Oct 2018 08:23:34 +0000 (16:23 +0800)]
rlimits: increase memlock limit [1/1]
PD#SWPL-982
Problem:
CtsHostsideNetworkTests module 22 fail
netd can't create bpf map because of memlock limit
Solution:
increase memlock limit
Verify:
p212
Change-Id: Ia770fce7d826c639b171f8e8807425202de58320
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Long Yu [Tue, 31 Jul 2018 06:45:21 +0000 (14:45 +0800)]
emmc: get emmc cmd-window for HS400 busmode
PD#169808: emmc: get emmc cmd-window for HS400 busmode
Change-Id: I88de1e9e5470bb6be7ad91e1ee58f5636f994923
Signed-off-by: Long Yu <long.yu@amlogic.com>
Yi Zhou [Wed, 17 Oct 2018 09:07:55 +0000 (17:07 +0800)]
hdmitx: add hdr10+ mechanism in hdmitx [2/2]
PD#SWPL-869
Problem:
need support hdr10+
Solution:
1. parse hdr10+ vsvdb
2. add hdr10+ vsif
Verify:
U200(G12A)
Change-Id: I0761efa7cadcb73bd9394820b080c9a127d03382
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
xianjun.liu [Fri, 12 Oct 2018 07:35:51 +0000 (15:35 +0800)]
mtd: nand: tl1: add support slc nand driver [1/1]
PD#172587
Problem:
Bringup slc nand for TL1.
Solution:
Add mtd driver for TL1.
Verify:
Just coding for tl1 and test later.
Change-Id: I910a8047394e0ff8fa7e617b90502910e1186c68
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
Yi Zeng [Wed, 17 Oct 2018 09:21:24 +0000 (17:21 +0800)]
arm: dts: tl1: add spi-nor node for tl1 [1/1]
PD#172587
Problem:
Bringup spi-nor for TL1.
Solution:
Add spi-nor node into dts file, default disabled.
Verify:
Verified on PXP.
Change-Id: I9edd358d41b052b7ecae47a550dcacbc27353955
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Ruixuan Li [Fri, 28 Sep 2018 12:04:23 +0000 (20:04 +0800)]
emmc: meson: add sdcard support for tl1 [1/1]
PD#172587
Problem:
Bringup emmc for tl1.
Solution:
Add sdcard support for tl1.
Verify:
Verified on pxp.
Change-Id: I73503d36b671da8d88a3613b4d6fd17434ff1fbf
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Zhuo Wang [Thu, 25 Oct 2018 09:40:44 +0000 (17:40 +0800)]
ethernet: fix crash when not use gpioz14/15 [1/1]
PD#174843
Problem:
g12b will crash when not include internal_eth_pins
Solution:
continue when it null
Verify:
verified in w400 with liaomin
Change-Id: Ib636e307f0697fa4eab1d0784543af96641def2e
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Blance Tang [Thu, 25 Oct 2018 09:27:44 +0000 (17:27 +0800)]
buildroot: Enable ppmgr in g12b_a113d_skt DTS [1/1]
PD#SWPL-802
Problem:
Black screen when play video, due to ppmgr is not enabled in g12b_skt
dts
Solution:
Enable ppmgr in g12b_a113d_skt DTS file
Verify:
W400
Change-Id: Ibe94b113552d54d365775556807bdacb249f9a00
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
pengcheng chen [Tue, 23 Oct 2018 01:32:05 +0000 (09:32 +0800)]
osd: fix osd get windows axis error [1/1]
PD#IPTV-31
Problem:
get sys class windows axis error
Solution:
fix osd get windows axis error
Verify:
u211
Change-Id: I5df5880bc43cb663255ecbf72d2b93b9c099b811
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Ruixuan Li [Tue, 23 Oct 2018 05:14:33 +0000 (13:14 +0800)]
emmc: emmc: modify the memory allocation mode when operate dtb [1/1]
PD#SWPL-426
Problem:
black screen when OTA upgrade
Solution:
modify the memory allocation mode when operate dtb
Verify:
p212
Change-Id: Idf67edd44f5e9f1d88be1e552fae485e04a655c6
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Dezhi Kong [Fri, 19 Oct 2018 06:52:15 +0000 (14:52 +0800)]
vpp: add video disable for g12 [1/1]
PD#174579
Problem:
osd shake once after quit local video play
Solution:
add video disable in advance for g12
Verify:
u211
Change-Id: Ic43693b25cf7bf8be24801a22ad36ac09c84a475
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Nan Li [Thu, 27 Sep 2018 03:11:48 +0000 (11:11 +0800)]
emmc: add sd/sdio fixdiv calc support [1/1]
PD#SWPL-139
Problem:
kernel sd card r/w error.
Solution:
add fixdiv calculate supported.
Verify:
verified in u200.
Change-Id: Ib454ffee5db26194631ae2e1c3d127bceab59bb7
Signed-off-by: Nan Li <nan.li@amlogic.com>
Zhuo Wang [Wed, 12 Sep 2018 07:28:29 +0000 (15:28 +0800)]
ethernet: add g12a/b mac wol function [1/1]
PD#173550
Problem:
g12a no wol function in internal phy, we add this function in mac
Solution:
add wol function in MAC
Verify:
verified in u200 board with uboot patch from guohong
Change-Id: I0a8fa81fbfb81d79c471bbafe68174118e276a46
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
live.li [Mon, 22 Oct 2018 11:10:50 +0000 (19:10 +0800)]
tsync: tsync: fix av sync problem random [1/1]
PD#SWPL-906
Problem:
The video and audio did not synchronous randomly
Solution:
it seems system time increase not by vsync isr,
so change the system time get interface to make
sure system time increase by vsync isr when
amaster mode
Verify:
R311&P321 32bit&64bit version
Change-Id: Ib3a556ba097fc6f0c51fd4560ab8101c6e7f509c
Signed-off-by: live.li <live.li@amlogic.com>
Tao Zeng [Tue, 23 Oct 2018 09:47:34 +0000 (02:47 -0700)]
Merge "debug: After reboot,the platform print a lot of logs Frequency [1/1]" into amlogic-4.9-dev
Tao Zeng [Tue, 23 Oct 2018 08:54:35 +0000 (01:54 -0700)]
Merge "dv: fix the flickered problem [1/1]" into amlogic-4.9-dev
Lianlian Zhu [Mon, 22 Oct 2018 08:55:57 +0000 (16:55 +0800)]
audio: solve 32bit system hdmi in mute issue [1/1]
PD#SWPL-813
Problem:
audio_iomap read audin reg 2800 error
Solution:
register val read from aml_read_cbus
maybe not positive number in 32bit system,
so change *val == -1 to judge mistake.
Verify:
verified by p321
Change-Id: Ie87001fa1daa621cadc2ce329d8dd863f39dcdb6
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
tao zeng [Tue, 23 Oct 2018 03:06:27 +0000 (11:06 +0800)]
pagetrace: add support for arm 32bit [1/1]
PD#SWPL-917
Problem:
On ARM32, reading of /proc/pagetrace get nothing output
Solution:
fix page trace print for ARM32 and improve read speed
Verify:
p212
Change-Id: I8963ad0cfaa403f69b9f1a56523bbd5b1d7b6980
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Yi Zhou [Tue, 16 Oct 2018 02:26:02 +0000 (10:26 +0800)]
dv: fix the flickered problem [1/1]
PD#SWPL-348
Problem:
fix the flickered problem.
Solution:
when dv core1 don't run, the reset can't be executed
Verify:
t962e (txlx)
Change-Id: I90e78676bbe64ded505148aa4c2516d808bf4a82
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
tao zeng [Mon, 22 Oct 2018 00:34:12 +0000 (08:34 +0800)]
mm: change filecache reclaim policy for CMA [1/1]
PD#SWPL-119
Problem:
High IOW usually happen when start playing 4K video. This
is because codec drvier will using large amount of memory
from CMA pool. And many filecache will be dropped after CMA
allocation finished without considering mapcount of each
file cache page.
Solution:
Check mapcount of filecache for each file pages. And migrate
them if they have high map count. High map count means this
file cache page is shared by many process.
Verify:
verified by ampere
Change-Id: I3e09437286f14a6cd9f7025566eb855dc9ca98d5
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Luan Yuan [Tue, 23 Oct 2018 06:41:08 +0000 (14:41 +0800)]
dts: add partition_mbox_p241.dtsi. [1/1]
PD#SWPL-924
Problem:
It occurs error when the kernel is compiled separately.
Solution:
copy partition_mbox_p241.dtsi to common/arch/arm/boot/dts/amlogic/
Verify:
verify by curie
Change-Id: Id5821c50c1333f6c91c2559894b10181a41df6a6
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Jianxiong Pan [Tue, 23 Oct 2018 04:24:57 +0000 (12:24 +0800)]
script: fix the defects in the merge_pre_check.pl [1/1]
PD#174488
Problem:
some defects in the script.
Solution:
rechange check rules in the script.
Verify:
verified locally.
Change-Id: I9c7011d1bd3b1d52131318dae34112d0d0164a00
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Tao Zeng [Tue, 23 Oct 2018 03:16:18 +0000 (20:16 -0700)]
Merge "dts: add support 32bit curie(805x) [1/1]" into amlogic-4.9-dev
Luan Yuan [Mon, 22 Oct 2018 04:23:35 +0000 (12:23 +0800)]
dts: add support 32bit curie(805x) [1/1]
PD#SWPL-889
Problem:
support 32bit curie(805x).
Solution:
add 32bit dts for curie(805x)
when KERNEL_A32_SUPPORT=true kernel 32bit build,
otherwise kernel 64bit build defaultly.
Verify:
verify by curie
Change-Id: I0ac24d4b2f6be1e3cd7241120ef06bfc9f46f2b8
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Hanjie Lin [Wed, 17 Oct 2018 08:51:28 +0000 (16:51 +0800)]
dts: aarch32: modify timer for aarch32 [1/1]
PD#SWPL-663
Problem:
32bit_kernel VtsKernelLinuxKselftest module 1 fail
can't find __vdso_gettimeofday
Solution:
modify timer for aarch32
Verify:
p212 boot normal
Change-Id: Id7a6f656eabf5230dcd60f6c25f39419577bba64
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Hanjie Lin [Mon, 22 Oct 2018 06:40:58 +0000 (14:40 +0800)]
defconfig: enable CONFIG_NETFILTER_XT_MATCH_BPF [1/1]
PD#SWPL-867
Problem:
VtsKernelConfig modules 1 fail
The following configs should be enabled: [CONFIG_NETFILTER_XT_MATCH_BPF]
Solution:
enable CONFIG_NETFILTER_XT_MATCH_BPF
Verify:
p212 boot normal
Change-Id: Iff38b23aba53c4663f1ca82bedfd8f3c55200835
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
zhiqiang.liang [Mon, 22 Oct 2018 09:31:50 +0000 (17:31 +0800)]
suspend: dts: solve system with the 32bit can not enter suspend state issue
PD#SWPL-495
problem:
Android P mainline 32bit can not enter suspend
solution:
modify the system sleep parameter
verify:
p321
Change-Id: I1ca5ee2043416c53e3301f5778a8ae8944292fc4
Signed-off-by: zhiqiang.liang <zhiqiang.liang@amlogic.com>
jiamin ma [Mon, 22 Oct 2018 01:02:52 +0000 (09:02 +0800)]
debug: After reboot,the platform print a lot of logs Frequency [1/1]
PD#SWPL-892
Problem:
We can see many user space unhandled page fault at 0 address:
such as
[ 140.882524@2] Chrome_InProcGp: unhandled page fault (11) at
0x00000000, code 0x005
which seems to be triggered by user space on purpose
Solution:
Show debug infos only if this fault cannot be handled by user
space
Verify:
Locally on P212
Change-Id: I54e8256de2f5465e5dd0f8d90d9d9058fe67f808
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Sandy Luo [Mon, 22 Oct 2018 08:32:28 +0000 (16:32 +0800)]
dts: add cpu idle for txl 32bit [1/1]
PD#SWPL-815
Problem:
It cann't suspend/resume for txl platform because idle issue.
Solution:
Open idle in dts file.
Verify:
verified by txl P321 platform
Change-Id: I8f133eb8c974f5fe6f351a4d9f83e677209ce7d2
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
keke.li [Fri, 19 Oct 2018 05:58:38 +0000 (13:58 +0800)]
gdc: add a new handle interface [1/1]
PD#173042
Problem:
user app need a new ioctl interface to handle image
Solution:
add a new ioctl cmd GDC_HANDLE to handle image
Verify:
verify by keke.li
Change-Id: I79ddc01962e4b2a40130ecd32cfebe5c1a7133e6
Signed-off-by: Keke Li <keke.li@amlogic.com>
rongrong zhou [Thu, 18 Oct 2018 03:13:15 +0000 (11:13 +0800)]
mm: do not recache pages at the end of playback
PD#SWPL-700
Problem:
The reset action will re-allocate the memory before the end of playback.
At this time, the codec_mm_scatter_mgt_delay_free_swith will raise the
cache pages from 20M to force_cache_page_cnt, resulting in redundant
allocation, resulting in memory fragmentation and more time-consuming
in reset action.
Solution:
Modify the judgment cache condition.
Verify:
verified by P212 platform
Change-Id: Ibe8bbbb1281667095d7c05daba48f75a8fae0dac
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Kaifu Hu [Mon, 15 Oct 2018 03:22:55 +0000 (11:22 +0800)]
hdmitx: repeater need to update edid [1/1]
PD#174510
Problem:
Soundbar has no sound when playing DTS audio
on HDMI source.
Solution:
Only repeater need to update RX edid as TV edid.
Verify:
Atom
Change-Id: I3d6def33477e6846a7365e888c207b1758060a38
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
sky zhou [Tue, 18 Sep 2018 11:12:34 +0000 (19:12 +0800)]
osd: add new osd capacity. [1/1]
PD#163001
Problem:
need update osd capacity for hwc modified
Solution:
osd: add new osd capacity.
Verify:
verified in u200 board1
Change-Id: I3d5f457b8d7277214d68c5d4c90c3484e8ccd4fa
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
pengcheng chen [Tue, 9 Oct 2018 08:45:56 +0000 (16:45 +0800)]
osd: enable shift workaround and fix some zorder issue [1/1]
PD#163001
Problem:
osd shift workaround default disable
some zorder display error
Solution:
enable shift workaround and fix some zorder issue
Verify:
verified in u200 board
Change-Id: I88489c31bcc4d0db838e59dc3fe1929bdb2a93f6
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Wed, 26 Sep 2018 05:38:06 +0000 (13:38 +0800)]
osd: add dimm layer support [1/1]
PD#163001
Problem:
dim layer not supported
Solution:
add dimm layer support
Verify:
verified in u200 board
Change-Id: Iba6f69b94b67c0d0861a1bbc9dff1724bc785133
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Mon, 15 Oct 2018 06:07:18 +0000 (14:07 +0800)]
ge2d: fixed ge2d_ion_config for axg error issue [1/1]
PD#SH-1
Problem:
run axg ge2d demo failed
Solution:
fixed ge2d_ion_config for axg error
Verify:
verified in A113D board
Change-Id: I48d789a42e7c0aad183fa4b6df1ca32a4ce1ab9b
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Mon, 15 Oct 2018 01:26:42 +0000 (09:26 +0800)]
osd: remove osd sync by go_field which caused reg writte messed [1/1]
PD#163001
Problem:
enable three osd layeres and run sftest caused afbc decode error
Solution:
remove osd sync by go_field which caused reg written messed
Verify:
verified in u200 board
Change-Id: Ida1647b93083608c7970d22b50125628c3528a5a
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Luan Yuan [Fri, 19 Oct 2018 08:03:25 +0000 (16:03 +0800)]
Revert "usb: adb reboot and then adb disconnect[1/1]"
This reverts commit
7fb9d732feb64946f280ee4843527cb5095c97ef.
Change-Id: Ie5aad3c54ddfe0ab56f19b1f9f8e32dfe9c92dd6
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Jianxin Pan [Fri, 19 Oct 2018 08:20:55 +0000 (16:20 +0800)]
debug: show ioremap vmalloc pfn debug when user faults happens [1/1]
PD#173163
Problem:
ioremap/vmalloc pfn is not printed when user fault
Solution:
show ioremap/vmalloc pfn debug when user faults happens
Verify:
verify local
Change-Id: I654fac58db7d8b35144b4c639e32c324b95ed032
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Jiacheng Mei [Thu, 18 Oct 2018 03:35:24 +0000 (11:35 +0800)]
dts: remove ethmac gpio [1/1]
PD#SWPL-770
Problem:
gpio conflict of isp i2c and ethmac
Solution:
remove gpio of ethmac
Verify:
g12b-skt
Change-Id: Icb2e6af14ecd397625565249f70d6fb58180b558
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
jiejing.wang [Mon, 15 Oct 2018 09:32:18 +0000 (17:32 +0800)]
audio: fix errors of coverity[1/1]
PD#166793
problem:
coverity detec errors of format
solution:
fix err
verify:
verify local
Change-Id: Ib86370e48a74ab9094cf7a2a80c3d1d2471f50eb
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
Lei Qian [Tue, 16 Oct 2018 12:32:21 +0000 (20:32 +0800)]
dts: sync 1g platform ion and codec_mm_cma with ampere [1/1]
PD#166821
Problem:
34 media CTS fails in einstein
Solution:
enlarge codec_mm_cma to d000000
Verify:
verify by einstein
Change-Id: I026a1ff3e6155324dff1a5b9702c31f19d68a57f
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
jiamin ma [Wed, 5 Sep 2018 07:39:24 +0000 (15:39 +0800)]
debug: show more debug infos when user faults happens
PD#173163: need more debug infos when user faults happens
1. show pfn for all registers;
2. show memory around all registers;
3. show vma maps around pc/lr
Change-Id: I37be84dcba66ce9ce6b60382a49cf6e9afd2bcb9
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
tao zeng [Wed, 17 Oct 2018 09:55:46 +0000 (17:55 +0800)]
mm: show more information when in bad mode [1/1]
PD#154260
Problem:
When bad mode happens, no pfn/far information is printed.
It get's problems to debug.
Solution:
1. Add far as parameter for bad_mode handler
2. Show pfn of all registers for bad_mode
Verify:
Local verified.
Change-Id: I4b0b457eff44ee717094ee8056f96ff16f111139
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
jiejing.wang [Thu, 18 Oct 2018 05:19:12 +0000 (13:19 +0800)]
audioinfo: fix kasan compile problem [1/1]
PD#173553
Problem:
check stack out of bounds
Solution:
change variable's definition
Verify:
verifyed by r311
Change-Id: Id6efc3ac56b297b6812e2af786732e65867a07da
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
zhiqiang.liang [Wed, 17 Oct 2018 01:24:07 +0000 (09:24 +0800)]
suspend: dts: solve ampere with the kernel 32bit can not enter suspend state issue
PD#SWPL-568
problem:
Ampere P mainline 32bit suspend,the serial port keeps printing
solution:
modify the system sleep parameter
verify:
p212
Change-Id: Id0827c09741a91b1fad8edcac603997e5bfd2880
Signed-off-by: zhiqiang.liang <zhiqiang.liang@amlogic.com>
nengwen.chen [Wed, 17 Oct 2018 09:44:38 +0000 (17:44 +0800)]
atv_demod: ATV sound system cannot be auto detected [1/2]
PD#TV-44
Problem:
ATV sound system cannot be auto detected.
Solution:
Update demod and tuner config after adjust freqency, so that audio can detect.
Verify:
verified by einstein and p321
Change-Id: I8ce70a8f1fd2261c098b7b7f02c93ee061dd52c9
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jianxiong Pan [Thu, 18 Oct 2018 06:23:50 +0000 (14:23 +0800)]
script: add new check rules in merge_pre_check.pl [1/1]
PD#174488
Problem:
add some new rules
Solution:
expand the scope of check
Verify:
p212
Change-Id: Ica28adb7ddb43e39cd4570e0338dbd59ec6a42f3
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Gongwei Chen [Thu, 11 Oct 2018 02:23:58 +0000 (10:23 +0800)]
dts: u212 1g: optimized cma [1/3]
PD#SWPL-492
Problem:
system response is slow
Solution:
optimized cma
Verify:
Verify by franklin 1g
Change-Id: I227fb168fa66566768fd4dbcefcbf100546daabd
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Jianxiong Pan [Thu, 18 Oct 2018 01:42:33 +0000 (09:42 +0800)]
script: dd new check rules in merge_pre_check.pl script [1/1]
PD#174488
Problem:
add some new rules
Solution:
strictly check as required
Verify:
p212 pass
Change-Id: Iaa056eece6e9f812751cd585f0b5537476edfab5
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
he.he [Tue, 16 Oct 2018 11:20:23 +0000 (19:20 +0800)]
usb: adb reboot and then adb disconnect[1/1]
PD#174155: complete_ep 0xffffffc05bed2858, ep->queue empty!
Problem:
1. After adb process be killed, data buffer is freed and
this memory is allocated for the other. But the address
is hold by the controller.
2. Adbd in PC is running. So, the controller receive the
data and write to this memory.
3.The value of this memory is modified by the controller.
This could cause the memory problem.
Solution:
whenever io_data->aio equals 1, the data buffer is from a fixed array.
Verify:
verified by huang xiaojing
Change-Id: I2055ea013021c8411bf626ce170e6b32164bef4a
Signed-off-by: he.he <he.he@amlogic.com>
Yue Wang [Wed, 17 Oct 2018 01:54:52 +0000 (21:54 -0400)]
usb: fix deadlock caused by switching usb serial port
PD#174679: usb: Fix deadlock caused by switching usb serial port.
Change-Id: I0bc9bb5d15b5794cfb8e218c03a98c395713e4c0
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Hanjie Lin [Mon, 15 Oct 2018 11:27:49 +0000 (19:27 +0800)]
perf: aarch32: support arm pmu [1/1]
PD#SWPL-631
Problem:
32bit_kernel CtsSimpleperfTestCases modules 39 fail
Solution:
modify dts for arm pmu
port pmu interrupt issue fixup code
http://scgit.amlogic.com:8080/#/c/47552/
Verify:
p212 perf test ok
Change-Id: Icd31d645c8af0ca64e898251ffe8dbb0469e47e7
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Hanjie Lin [Wed, 17 Oct 2018 06:36:19 +0000 (14:36 +0800)]
vts: aarch32: remove ext2 support [1/1]
PD#SWPL-664
Problem:
32bit_kernel VtsKernelLtp module 6 fail
Solution:
ext2 cause VtsKernelLtp#fs.fs_fill_32bit fail
Verify:
p212 boot normal
Change-Id: Ib3113705939cccffd05ae4adc220b8aa333be4fb
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Dezhi Kong [Mon, 15 Oct 2018 06:31:11 +0000 (14:31 +0800)]
vlock: fix issue of hdmitx output timing swith [1/1]
PD#174283
Problem:
The display turned blank / black on switching HDMI input sources
Solution:
optimize timing swith check condition
Verify:
verified by r321 board in Android P
Change-Id: If6138794d02e34fcbde8be4a3a4fbcf42b49e85c
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Evoke Zhang [Sat, 4 Aug 2018 07:59:25 +0000 (15:59 +0800)]
backlight: ldim: add debug node for tooling [2/3]
PD#169790
Problem:
need tooling api support for ldim driver
Solution:
add debug node for tooling
Verify:
txlx r311
Change-Id: I1937a8154856aa694545ff40d7712132a113b8f3
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jiacheng Mei [Thu, 20 Sep 2018 08:29:28 +0000 (16:29 +0800)]
dts: isp: add multi-sensor support
PD#SWPL-720
Problem:
multi-sensor need config dts
Solution:
add multisensor dts config
Verify:
g12b-skt
Change-Id: I13aa339a54ab33340438d0a2b284c857254ef08b
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
Evoke Zhang [Fri, 12 Oct 2018 11:43:25 +0000 (19:43 +0800)]
vlock: update lcd vlock parameter flow [1/1]
PD#SWPL-321
Problem:
vlock parameters load fail for lcd unifykey loading is later
Solution:
use queue work to sync lcd unifykey vlock parameters
Verify:
txlx r311
Change-Id: I17fac4ca48fbd8f5b929eccfd38eb7e8a4b5b845
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jianxiong Pan [Wed, 17 Oct 2018 05:59:59 +0000 (13:59 +0800)]
script: add new check relus in merge_pre_check.pl script [1/1]
PD#174488
Problem:
add some new rules
Solution:
expand the scope of check
Verify:
p212
Change-Id: I4b5428367520456195645dbbce86c5f40411d59a
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
jiamin ma [Mon, 15 Oct 2018 10:02:33 +0000 (18:02 +0800)]
unifykey: fix wrong KEY_UNIFY_NAME_LEN limit on ARM64_32 platform
PD#SWPL-628
Problem:
The KEY_UNIFY_NAME_LEN limit errorly set to 16 on ARM64_32
platform, for which the correct value is 48
Solution:
Define KEY_UNIFY_NAME_LEN based on the configuration of
CONFIG_ARM64 and CONFIG_ARM64_A32
Verify:
Locally
Change-Id: I93157a907405829b088cb0f7387c1eb90c917188
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Tao Zeng [Tue, 16 Oct 2018 08:43:29 +0000 (01:43 -0700)]
Merge "interactive: disable idle notifier" into amlogic-4.9-dev
yicheng shen [Mon, 15 Oct 2018 06:06:13 +0000 (02:06 -0400)]
hdmirx: fix hdcp2.2 does not work issue
PD#SWPL-308
Problem:
32bit kernel + 32bit userspace,driver needs to use unlocked_ioctl.
Otherwise,IOCTL can not work normally and cause esm init fail.
Solution:
Add unlocked_ioctl handle.
Verify:
Locally
Change-Id: I5a3608088633d89c76c7b7684dc4580d44b77263
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Yi Zhou [Mon, 15 Oct 2018 09:04:10 +0000 (17:04 +0800)]
hdmitx: esm: add unlocked_ioctl in esm [1/1]
PD#SWPL-566
Problem:
hdcp_tx22 can't work with 32bit kernel
Solution
add unlocked_ioctl in esm of 32bit kernel
Verify:
P215
Change-Id: I072abb2ba395c75d92f082ecadcc21e1fefc6f73
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Shunzhou Jiang [Mon, 15 Oct 2018 02:47:51 +0000 (10:47 +0800)]
clk: axg: fix 32bit set mpll clk overflow
PD#SWPL-394
Problem:
32bit system clk overflow
Solution:
let mpll clock not overflow
Verify:
gxl
Change-Id: I90c99c026264bb4d6820cd988bd5f8828456e0f6
Signed-off-by: shunzhou.jiang <shunzhou.jiang@amlogic.com>
Jianxin Pan [Mon, 15 Oct 2018 13:07:36 +0000 (21:07 +0800)]
interactive: disable idle notifier
PD#SWPL-569
Problem:
Randomly encountered the phenomenon of kernel panic restart
(add_timer_on) from [<
c09acdfc>] (slack_timer_resched+0xa8/0xdc)
(slack_timer_resched) from [<
c09ae2f0>] (cpufreq_interactive_start+0xac/0x234)
(cpufreq_interactive_start) from [<
c09a8168>] (cpufreq_start_governor+0x68/0xa4)
(cpufreq_start_governor) from [<
c09a9e9c>] (cpufreq_online+0x4f8/0x794)
(cpufreq_online) from [<
c09aa150>] (cpuhp_cpufreq_online+0x18/0x20)
(cpuhp_cpufreq_online) from [<
c03231b8>] (cpuhp_invoke_callback+0xa8/0x638)
(cpuhp_invoke_callback) from [<
c0323898>] (cpuhp_up_callbacks+0x34/0xe8)
(cpuhp_up_callbacks) from [<
c0324774>] (cpuhp_thread_fun+0x13c/0x14c)
(cpuhp_thread_fun) from [<
c034ab64>] (smpboot_thread_fn+0x1a8/0x32c)
(smpboot_thread_fn) from [<
c0346428>] (kthread+0x124/0x140)
(kthread) from [<
c03089d0>] (ret_from_fork+0x14/0x24)
Solution:
disable idle notifier for interactive
Verify:
verified by p212
Change-Id: I412dab961f04bea439d5a26564268289fc4b3940
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Luan Yuan [Mon, 15 Oct 2018 05:58:53 +0000 (13:58 +0800)]
dtsi: dtbo: change dto partition name to dtbo [1/1]
PD#173146
Problem:
All devices launching with Android 9 must use dtbo partition
and previous leave out curie dtsi
Solution:
Android P request device tree overlay partition name is dtbo
Verify:
verified by p241
Change-Id: If3067ef4d67c7b692668f28b3e5a2233ea393a1a
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Jianxiong Pan [Mon, 15 Oct 2018 12:10:38 +0000 (05:10 -0700)]
Revert "script: add new check rules in merge_pre_check.pl script [1/1]"
This reverts commit
57728014eeca00e12f843b293ce3be51c042450b.
Change-Id: Ia803a24fe6b6abd00d4015bb1e6857c2826efac7
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jianxiong Pan [Mon, 15 Oct 2018 08:14:49 +0000 (16:14 +0800)]
script: add new check rules in merge_pre_check.pl script [1/1]
PD#174488
Problem:
some new rules should be added to the check scripts
Solution:
call the git_msg_check.sh script directly
Verify:
p212
Change-Id: I67c6515038ca2817236e63b4c9f4239583a20613
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Lei Qian [Fri, 12 Oct 2018 13:19:58 +0000 (21:19 +0800)]
cts: dts: add dummy battery driver for TV [1/1]
PD#169027
Problem:
some CTS and VTS testcases use the battery information
Solution:
here add a dummy battery for it.
for P, it requires a dummy charger to set the online property to 1.
Verify:
verified by einstein
Change-Id: I78d2cf54904144bb24cd46670aa7377f2055cf55
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Kuibao Zhang [Fri, 7 Sep 2018 07:45:56 +0000 (15:45 +0800)]
BT: porting cpy 2704
PD#172583: bt power and uart rts
Change-Id: I392b3caf0771c9608d532694ecd16b52dccf05a3
Signed-off-by: Kuibao Zhang <kuibao.zhang@amlogic.com>
Yong Qin [Fri, 14 Sep 2018 02:40:54 +0000 (10:40 +0800)]
hdmi: cec: change cec IP
PD#173638: cec: change cec IP
Change-Id: Ia5ef195a90b272ec74858a7afca0b7959b0c6817
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jianxiong Pan [Wed, 10 Oct 2018 06:40:28 +0000 (14:40 +0800)]
script: allow JIRA BugId check in the merge_pre_check.pl script
PD#174488: add JIRA BugId check in the merge_pre_check.pl script
Change-Id: I32f2fc123041e6c40ce2a5c4208734e11b307fd5
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
nengwen.chen [Thu, 11 Oct 2018 02:16:56 +0000 (10:16 +0800)]
atv_demod: modify PALM/N's resolution and sound system display error [3/3]
PD#SWPL-434
Problem:
PALM/N's resolution and sound system display error
Solution:
modify PALM/N's resolution and sound system display error
PALM: 480i PALN: 576i
Verify:
verified by einstein
Change-Id: I2271222634fb5d382aebff31289ab22ddb443bc3
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Nian Jing [Fri, 12 Oct 2018 09:51:01 +0000 (17:51 +0800)]
vdac: fix crash issue
PD#174269: fix crash issue
Problem:
crash when unplug hdmi.null pointer visiting
Solution:
delete dts config,add null pointer protect
Verify:
test pass on p212
Change-Id: I5176aa4eb398b1bedf14b36ec6529c471e927530
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yao.Liu [Thu, 11 Oct 2018 06:49:23 +0000 (02:49 -0400)]
driver: video: fix hdr info not disapear problem [2/2]
PD#173100
Problem:
still show hdr info after switching hdr stream
to non-hdr stream when surface not changed
Solution:
OMX set hdr to decoder, it will be used by amvecm
Verify:
verify by u212
Change-Id: I7d013921fb4124d9aed9f51871253c76c666c022
Signed-off-by: Yao.Liu <yao.liu@amlogic.com>
Tellen Yu [Wed, 5 Sep 2018 11:12:03 +0000 (19:12 +0800)]
dtsi: dtbo: change dto partition name to dtbo [1/2]
PD#173146
Problem:
All devices launching with Android 9 must use dtbo partition
Solution:
Android P request device tree overlay partition name is dtbo
Verify:
verified by p212 board in Android P
Change-Id: If48b6eaf0a0ee2d76a5fb0b58353fb82381c71ee
Signed-off-by: Tellen Yu <tellen.yu@amlogic.com>
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
Hanjie Lin [Fri, 21 Sep 2018 09:31:57 +0000 (17:31 +0800)]
dts: arch32: support 32bit g12a bringup [1/1]
PD#169652
Problem:
support 32bit g12a
Solution:
add 32bit dts for g12a
when KERNEL_A32_SUPPORT=true kernel 32bit build,
otherwise kernel 64bit build defaultly.
Verify:
u212 can boot to console, but surfaceflinger can't work
Change-Id: Ia3e92267afbaaa069f3658a101756e4034d08b4d
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
shuanglong.wang [Tue, 2 Oct 2018 07:56:32 +0000 (15:56 +0800)]
amdolby_vision: fix kernel crash [1/1]
PD# 173406
Problem:
kernel crash when play dv after insmod 4.9 stb dovi.ko at t962x-r311 platform
[ 118.398098@0] Internal error: Oops:
96000047 [#1] PREEMPT SMP
[ 118.440794@0] CPU: 0 PID: 2869 Comm: irq/40-vdec-0 Tainted: GO 4.9.113 #2
[ 118.448726@0] Hardware name: Amlogic (DT)
[ 118.452694@0] task:
ffffffc01ae2b700 task.stack:
ffffffc023e4c000
[ 118.458740@0] PC is at __memcpy+0x110/0x180
[ 118.462878@0] LR is at dolby_vision_parse_metadata+0xb3c/0x1920
[ 118.468736@0] pc : [<
ffffff800947c690>] lr : [<
ffffff800998b33c>]pstate:
200001c5
[ 118.476239@0] sp :
ffffffc027e3fb30
Solution:
fix vmalloc error, function pointer add protection
Verify:
need verify at t962x-r311 platform
Change-Id: I3f0872480dabbf8b415d798d6b205028f08fd89a
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Lianlian Zhu [Thu, 11 Oct 2018 08:25:48 +0000 (16:25 +0800)]
audio: add 9015s module for 32bit system[1/1]
PD#SWPL-509
Problem:
DAI link has no CODECs because of
configuration has no 9015s codec module.
Solution:
add 9015s module for configuration
Verify:
verified by p321
Change-Id: I448144bdc392dba1c528b41e37a9388c5343d7ec
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
jiamin ma [Thu, 11 Oct 2018 02:31:00 +0000 (10:31 +0800)]
32bit: enable running 32bit OS on AXG platforms [1/3]
PD#SWPL-513
Problem:
AXG platforms does not support running 32bit kernel
Solution:
Since kerenl already support build 32bit kernel for
64bit SOC, we only need new dts and configs for it
This patch adds DTS for 32bit kernel of S420 and S
400
Verify:
verified locally on S400 and S420
Change-Id: I47d3cb3a35a00d5450d978ba65af540edc601619
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>