staging: comedi: skel: remove driver

The comedi skeleton driver is one of the few "hybrid" drivers with
both legacy and PCI attach mechanisms. Instead of splitting this
driver, just remove it. There are many other comedi drivers that
provide better examples.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: range check board index

The "ni_at_a2150" driver determines the board type by calling
`a2150_probe()`.  This reads a register and converts it to a board index
in the range 0 to 3.  However, the board table array it indexes into
(`a2150_boards[]`) only has 2 entries.  Return an error from the
Comedi driver "attach" handler `a2150_attach()` if the probed board
index is beyond the end of the array.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: binder: fix coding style issues

Fix coding style issues:
* put braces in all if-else branches;
* limit the length of changed lines to 80 columns.
checkpatch.pl warning count reduces by 3.

Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Break up a long line in binder_send_failed_reply

Kernel coding style. Breaking long lines and strings.

Signed-off-by: William Panlener <wpanlener@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: use kmalloc_array over kmalloc with multiply

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: fix redundant return in void function

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: fix redundant else after break or return

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: fix missing blank line after declaration

Cleanup checkpatch.pl warnings.

Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: uislib: uislib.c: sparse warning of context imbalance

fixed sparse warning : context imbalance in 'pause_device'
unexpected unlock
this patch will generate warning from checkpatch for
lines over 80 character , but since those are user-visible strings
so it was not modified.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Tested-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: uislib: uisqueue.c: rewrite of do_locked_client_insert

1) removed unused variables
2) fixed sparse warning of context imbalance in 'do_locked_client_insert'
                         different lock contexts for basic block
3) removed the call to visor_signalqueue_empty() , this function is
   checking whether a signal queue is empty, but the return value
   of the function is not beeing used, so it is safe to remove.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: expand the GOTO macro + break

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl,rc,f;
constant c;
@@

- GOTO(lbl,\(rc\|rc->f\|c\));
- break;
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
- break;
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: expand double GOTO macros

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
@@

if (...)
  GOTO(lbl,...);
+else
GOTO(lbl,...);

@@
identifier lbl;
expression e,e1,e2;
@@

if (e)
-  GOTO(lbl,e1);
-else GOTO(lbl,e2);
+  e1;
+else e2;
+goto lbl;

@@
identifier lbl1,lbl2;
expression e,e1,e2;
@@

+ e1=e2;
if (e)
-  GOTO(lbl1,e1=e2);
-GOTO(lbl2,e1=e2);
+  goto lbl1;
+goto lbl2;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lvfs: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: annotate lock/unlock in lov_stripe_lock / lov_stripe_unlock

Annotate the lock/unlock pair in lov_stripe_lock/lov_stripe_unlock to
avoid sparse warning about a context imbalance.
Part of the eudyptula challenge: http://eudyptula-challenge.org/

Signed-off-by: Mostyn Bramley-Moore <mbmcode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove local_storage.[ch]

Remove the unused files lustre/obdclass/local_storage.[ch].

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove llog_ioctl.c

Remove the unused function llog_ioctl() and the file
lustre/obdclass/llog_ioctl.c.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: remove sptlrpc_conf_target_get_rules()

Remove the unused function sptlrpc_conf_target_get_rules() and its
supporting functions.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: remove server specific llog handling

In mgc_process_cfg_log() remove code to handle
LLOG_CONFIG_ORIG_CTXT. This context is not setup on clients.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove unused OBD methods

Remove the unused OBD device methods:
    obd_brw()
    obd_cancel()
    obd_cancel_unused()
    obd_change_cbdata()
    obd_create_async()
    obd_enqueue()
    obd_enqueue_rqset()
    obd_extent_calc()
    obd_llog_connect()
    obd_llog_finish()
    obd_llog_init()
    obd_merge_lvb()
    obd_pin()
    obd_pin_observer()
    obd_ping()
    obd_precreate()
    obd_punch()
    obd_punch_rqset()
    obd_sync()
    obd_sync_rqset()
    obd_unpin()
    obd_unpin_observer()

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: inline mgc_cancel()

The function mgc_cancel() is never invoked as an OBD device method and
is only called directly from mgc_process_log() so remove it.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: inline llog methods

In mdc_setup() and mdc_precleanup() call mdc_llog_init() and
mdc_llog_finish() directly rather than through the OBD method wrappers
obd_llog_init() and obd_llod_finish(). Simplify the prototypes of
mdc_llog_init() and mdc_llog_finish() according to their uses.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: remove unused OBD methods

Remove the unused OBD device methods mdc_pin() and mdc_unpin().

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove obd_ost.h

Move the structures defined in lustre/include/obd_ost.h to the one
file that uses them (lustre/osc/osc_request.c). Remove the unused
function osc_update_enqueue(). Remove the then empty header
lustre/include/obd_ost.h.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: remove obsolete llog handling code

In osc_request.c there is no reason to handle any llog contexts since
they are never setup. Remove the functions unused function
osc_llog_init() and the obsolete function osc_llog_finish(). Remove
the llog cleanup code in osc_disconnect() and osc_precleanup().

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: remove unused OBD methods

Remove the unused OBD device methods:
    osc_brw()
    osc_cancel()
    osc_cancel_unused()
    osc_change_cbdata()
    osc_enqueue()
    osc_punch()
    osc_sync()
and their supporting functions.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lov: remove unused OBD methods

Remove the unused OBD device methods:
    lov_brw()
    lov_cancel()
    lov_cancel_unused()
    lov_change_cbdata()
    lov_enqueue()
    lov_extent_calc()
    lov_getattr()
    lov_merge_lvb()
    lov_punch()
    lov_setattr()
    lov_sync()
and their supporting functions.

In lov_iocontrol() remove the unused cases LL_IOC_LOV_SETSTRIPE and
LL_IOC_LOV_SETEA and their supporting functions.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Different prototypes between the declaration and the definition

Align the prototype of lprocfs_wr_uint() in the declaration with the one used
in the definition.

The prototype is:
int lprocfs_wr_uint(struct file *file, const char __user *buffer,
                    unsigned long count, void *data)
In obdclass/lprocfs_status.c

But in lustre/include/lprocfs_status.h, the __user annotation is missing for
the attribute buffer.

The correct prototype is the first one (the definition) since:
- This function is eventually called by the write() function pointer of an
instance of struct file_operations
- In this function, buffer is a parameter of copy_from_user()
- Before the commit 73bb1da692d0dc3e93b9c9e29084d6a5dcbc37a6, the declaration
and the definition had the same prototype, but only the .c has been updated.

Correcting this will remove a sparse error and add sparse warnings.
This is a task of the Eudyptula challenge.

Signed-off-by: Loïc Pellegrino <oort10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Annotate user buffer with __user

Fix the warning reported by sparse on drivers/staging/lustre/lnet/lnet/router_proc.c
warning: incorrect type in argument 4 (different address spaces)
The correction is to annotate all user buffer variable by __user

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: include missing header

This patch fixes the following sparse warnings:

drivers/staging/rtl8188eu/hal/phy.c:46:5: warning: symbol
'phy_query_bb_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:56:6: warning: symbol
'phy_set_bb_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:129:5: warning: symbol
'phy_query_rf_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:140:6: warning: symbol
'phy_set_rf_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:228:6: warning: symbol
'phy_set_tx_power_level' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:324:6: warning: symbol
'phy_set_bw_mode' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:360:6: warning: symbol 'phy_sw_chnl'
was not declared. Should it be static?

Signed-off-by: Nicolas Thery <nthery@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix sparse warning by making functions static.

Signed-off-by: Andreas Schlick <ninox@posteo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: avoid multiple assignments

Coding style: avoid multiple assignments

Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: document mutex usage

Coding style: document mutex usage

Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: fix alignment to match open parenthesis

Coding style: fix alignment to match open parenthesis

Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: document spinlock usage

Coding style: document spinlock usage

Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: remove useless space after a cast

Coding style: remove useless space after a cast

Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: suppress consecutive blank lines

Coding style: suppress consecutive blank lines

Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gs_fpgaboot: remove unnecessary return statements

This fixes "void function return statements are not generally useful"
warnings from checkpatch.pl.

Signed-off-by: Michał Bartoszkiewicz <mbartoszkiewicz@gmail.com>
Reviewed-by: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: remove unnecessary else

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Fixed checkpatch warning: Use #include <linux/statfs.h> instead of <asm/statfs.h>

Signed-off-by: Filipe Gonçalves <filipe@codinghighway.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: dgap: fix the checkpatch.pl issue "Warning: line over 80 characters"

Break lines exceeding 80 characters

Signed-off-by: Piotr Witoslawski <pwitos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: lmv_internal.h: fix checkpatch.pl spacing errors

lmv_internal.h:96: ERROR: space prohibited after that open parenthesis '('
lmv_internal.h:96: ERROR: space required before the open parenthesis '('
lmv_internal.h:147: WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: fix brace style coding issue in r819xU_firmware.c

Signed-off-by: Chaitra Ramaiah <linux.delve@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix missing blank lines after declarations

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: use braces on all arms of if

Signed-off-by: Grzegorz Swirski <grzegorz@swirski.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: simplify interrupt enable handling

`struct pci230_private` has two members to manage the enabled interrupt
sources.  `int_en` is the interrupt sources we want to be enabled and
`ier` is a shadow of the write-only interrupt enable register.  They
have the same value most of the time.  They differ in the interrupt
handler (`pci230_interrupt()`) itself when it temporarily clears bits in
the interrupt enable register and the `ier` member in order to unlatch
them in hardware, but leaves the `int_en` member alone.  They also
differ in `pci230_ai_stop()` and `pci230_ao_stop()` which clear bits in
the `int_en` member and wait for the interrupt handler to finish before
copying the value to the `ier` member and the interrupt enable register.

Simplify the handling a bit, by making the `ier` member take on the role
of the `int_en` member, and allowing the value to differ from the
interrupt enable register while the interrupt handler is running.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: change pci230_handle_ao_fifo() return type

Change the return type of `pci230_handle_ao_fifo()` from `int` to
`bool`.  A return value of `true` indicates the AO command is still
running.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: reduce indentation in pci230_ai_start()

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: reduce indentation in pci230_ai_inttrig_convert()

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: reduce indentation in pci230_ao_start()

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: reduce indentation in pci230_ao_inttrig_scan_begin()

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: rewrite shared resource handling

Some counter channels may be required for AI commands and AO commands.
Depending on how the commands are set up, it may not be possible to run
both at the same time, so we keep some state and code to find out if the
required resources are busy or not.

The existing code is a bit unwieldy - the code for claiming resources
involves two `for` loops for example.  Rewrite it to make it simpler.

The new code just has a bit-mask value for each shared resource (counter
channels), and an array indexed by resource "owners" (AI and AO
commands), so the code for claiming resources now just has a single loop
that checks that none of the other owners have claimed the wanted
resources.

Rename the functions involved, because the old names involving 'put' and
'get' suggested some sort of usage counting.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: replace `state` member with bitfields

The `state` member of `struct pci230_private` is used with the atomic
bit-op functions and has a couple of bits defined, `AI_CMD_STARTED` and
`AO_CMD_STARTED`.  Spin-locks are used to protect the clearing of these
bits and other stuff.  No special protection is used for setting these
bits.  Replace the `state` member with a couple of new, single-bit
bitfield members, `ai_cmd_started` and `ao_cmd_started` to save some
space.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: make `intr_running` a bitfield

Change the `intr_running` member of `struct pci230_private` into a
single-bit bitfield of type `bool` to save a bit of space.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: use comedi_range_is_bipolar()

Use the inline `comedi_range_is_bipolar()` function from "comedidev.h"
to decide whether a range is bipolar or unipolar instead of using the
local static arrays `pci230_ai_bipolar[]` and `pci230_ao_bipolar[]`
which can then be removed.

Change the types of the `ai_bipolar` and `ao_bipolar` members of `struct
pci230_private` to `bool` to match the return value of
`comedi_range_is_bipolar()` and change them into single-bit bitfields to
save a bit of space.  Also change the type and name of some local
variables in `pci230_ai_check_chanlist()` that hold the result of
`comedi_range_is_bipolar()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: add `pci230_` prefix to functions

Most functions in "amplc_pci230" are named with the prefix `pci230_`,
apart from one or two that have the prefix `amplc_pci230_` and a few
odd-balls with no particular prefix.  Rename the ones without a prefix
for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: rename pci230_ai_rinsn()

Rename the AI subdevice "insn_read" handler function `pci230_ai_rinsn()`
to `pci230_ai_insn_read()` for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove 'inline'

Some functions in "amplc_pci230.c" are declared `inline`.  Remove the
`inline` specifiers and let the compiler do what it wants with them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: simplify pci230_ai_read()

`pci230_ai_read()` reads a sample from the ADC data register and
converts it to a comedi sample value.  The AI sample may have 12 or 16
bits of resolution, depending on the board type, but 12-bit sample
values are in bits 15 to 4 of the register.  The hardware value is
signed, 2's complement if set to a bipolar mode, or unsigned, straight
binary if set to a unipolar mode.  To convert to a Comedi sample value
it may need shifting right by 4 bits, and the top bit of the sample
value may need to be toggled.

Simplify the existing code by doing the 2's complement to straight
binary conversion before the shift.  That way, it is always bit 15 that
is inverted regardless of the resolution.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: simplify pci230_ao_mangle_datum()

`pci230_ao_mangle_datum()` converts comedi sample values for the AO
subdevice to hardware register values.  The comedi sample value will be
an unsigned value in the range 0 to 4095 (assuming 12-bit resolution).
The hardware wants the value shifted so the m.s. bit of the sample in in
bit 15.  If set to a bipolar range, it also expects a 2's complement
value, so the top bit of the sample value needs to be inverted in that
case.

Simplify the existing code by doing the 2's complement conversion after
the shift.  That way, it is always bit 15 that is inverted regardless of
the resolution.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: shrink struct pci230_board

The `ai_bits`, `ao_bits`, and `min_hwver` members of `struct
pci230_board` are only set to small, non-negative values, so make them
`unsigned char`.  The `have_dio` member is used as a boolean so change
it to a bitfield of type `bool`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove ao_chans member

The PCI230(+) has an AO subdevice with 2 channels, but the PCI260(+) has
none.

The `ao_chans` member of `struct pci230_board` indicates whether the
board has an AO subdevice and the number of AO channels.  The
`ao_bits` member indicates the AO sample width in bits and will only be
non-zero for boards with an AO subdevice.

Use `ao_bits` to indicate whether the board has an AO subdevice.  If it
has, assume the the number of AO channels is 2.  Then the `ao_chans`
member becomes redundant and can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove ai_chans member

All boards supported by the "amplc_pci230" driver have 16 AI channels,
so the `ai_chans` member of `struct pci230_board` is superfluous and can
be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: absorb pci230_alloc_private()

`pci230_alloc_private()` is now only called from `pci230_auto_attach()`
to allocate private device storage and initialize various spin-lock
members therein.  Absorb the body of `pci230_alloc_private()` into
`pci230_auto_attach()` itself.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: no need to comedi_set_hw_dev() here

The comedi core module calls `comedi_set_hw_dev()` to associate the
hardware `struct device` with the `struct comedi_device` before it calls
the comedi driver's "auto_attach" hook `pci230_auto_attach()`.  There is
no need for `pci230_auto_attach()` to call `comedi_set_hw_dev()` itself,
so remove the call.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: absorb pci230_attach_common()

`pci230_attach_common()` is now only called from `pci230_auto_attach()`,
so absorb it into that function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: set detach handler to comedi_pci_detach()

Since the comedi driver's "detach`" handler `pci230_detach()` now merely
calls `comedi_pci_detach()` with the same parameter, use
`comedi_pci_detach()` itself as the "detach" handler.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: no need to manipulate PCI ref count

This driver no longer supports a "legacy" attach mechanism that searches
for a suitable PCI device and increments it's reference count, but since
the common "detach" handler `pci230_detach()` still has a left-over
`pci_dev_put()`, a matching `pci_dev_get()` is needed in the
"auto_attach" handler `pci230_auto_attach()`.  There is no longer any
reason to "get" and "put" the PCI device, so those calls can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove "legacy" attach mechanism

The "amplc_pci230" driver currently retains the legacy attach mechanism
to allow devices to be attached manually via the `COMEDI_DEVCONFIG`
ioctl.  The only real use for this is to pretend that a PCI230+ or
PCI260+ is a PCI230 or PCI260 for backwards compatibility, as they have
different number of bits of resolution on the AI subdevice.  Since the
card would be automatically configured as a PCI230+ or PCI260+ at PCI
probe time anyway, hopefully any users who want it to appear as a PCI230
or PCI260 would have got tired of removing the automatically configured
device and configuring it manually by now and will have updated their
software to cope with the PCI230+ or PCI260+.

Get rid of the legacy attach mechanism by removing the Comedi driver
"attach" handler `pci230_attach()` and associated code.  Also remove the
"wildcard" entry from the board table `pci230_boards[]` as it is no
longer needed.  Don't bother initializing the `board_name`, `offset`,
and `num_names` members of `struct comedi_driver amplc_pci230_driver`
any longer as they are only needed when configuring the device manually.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: collapse some 'else { if' chains

Where the only thing in an `else { ... }` block is another `if`
statement, collapse it to an `else if {` block where it makes sense to
do so.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove some unnecessary parentheses

Remove some pairs of parentheses that don't really improve readability.
Also, reduce the amount of leading whitespace in a few places.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: don't use multiple blank lines

Fix checkpatch issues: "CHECK: Please don't use multiple blank lines".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: update MODULE_DESCRIPTION()

Replace the generic, Comedi low-level driver module description string
with something more specific.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename Hal8188EPwrSeq.h to pwrseq.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Hal8188EPwrSeq.h: fix lines over 80 char

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalPwrSeqCmd.h to pwrseqcmd.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalPwrSeqCmd.c to pwrseqcmd.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename Hal8188EPwrSeq.c to pwrseq.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: HalPwrSeqCmd.h: Remove unnecessary comments.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Hal8188EPwrSeq.c: fix lines over 80 characters.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function HalPwrSeqCmdParsing()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: et131x.c: sparse warning of incompatible types

fixed sparse warning:   incompatible types in comparison expression
(different address spaces)

wolw and reg both are being used only for the initialization of
the __iomem area.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: miscellaneous cleanup

This patch completes two final matters of cleanup which are each too small
for their own patch.  It corrects a couple of indentation issues and
removes a return statement at the end of a void function.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: clean some whitespace style issues

Now that commented out code has been removed, else statements can move to
the same line as the close brace of the if statement.  Also, a blank line
has been added between declarations and code where needed.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: remove commented out code

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: remove unneeded braces

We don't need braces around single-statement blocks.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3501: change printk to dev_err

dev_err() is preferred to printk() in device drivers.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci035: remove useless return statement

Checkpatch pointed out a void function with a return statement.  It can be
removed.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix return is not a function, parentheses are not required error

Fix checkpatch.pl return is not a function, parentheses are not required error

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: ft1000: Fix return is not a function, parentheses are not required errors

Fix checkpatch.pl return is not a function, parentheses are not required errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use USB_DIR_IN

Replace a magic value with #defined macro.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use generic control packet header

Use generic control packet header structure definition.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: split two assignments into the two assignments on two lines.

split two assignments into the two assignments on two lines.

CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix sleeping under spinlock bug

This commit changes the memory allocation flags to ATOMIC in order to
avoid sleeping in the nowait/nolock code.

Signed-off-by: Konrad Zapalowicz <bergo.torino+kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: Fix checkpatch.pl warning

This patch fixes the following checkpatch.pl warning:

WARNING: Possible unnecessary 'out of memory' message
#116: FILE: ./xlr_net.c:116:
+ if (!skb) {
+ pr_err("SKB allocation failed\n");

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: fix more sparse endianness warnings

Sparse shows a couple of warnings like:

drivers/staging/comedi/drivers/usbduxsigma.c:787:23: warning: cast to restricted __be32

Looking at the indicated lines shows that the issue is caused by an
incorrect cast to uint32_t instead of __be32.  Fix this cast.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: fix more sparse endianness warnings

Sparse shows a couple of warnings like:

drivers/staging/comedi/drivers/usbdux.c:889:20: warning: incorrect type in assignment (different base types)
drivers/staging/comedi/drivers/usbdux.c:889:20:    expected unsigned short [unsigned] [short] [usertype] <noident>
drivers/staging/comedi/drivers/usbdux.c:889:20:    got restricted __le16 [usertype] <noident>

This is the result of a couple of calls to cpu_to_le16() being assigned to
uint16_t typed variables.  Switch the types of these variables/pointers to
__le16 accordingly.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix space prohibited between function name and open parenthesis

This patch fixes the following checkpatch.pl warning in lnet/lnet/lib-eq.c:
WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>