platform/kernel/linux-exynos.git
8 years agomm, page_alloc: pull no_progress_loops update to should_reclaim_retry()
Vlastimil Babka [Sat, 8 Oct 2016 00:00:40 +0000 (17:00 -0700)]
mm, page_alloc: pull no_progress_loops update to should_reclaim_retry()

The should_reclaim_retry() makes decisions based on no_progress_loops,
so it makes sense to also update the counter there.  It will be also
consistent with should_compact_retry() and compaction_retries.  No
functional change.

[hillf.zj@alibaba-inc.com: fix missing pointer dereferences]
Link: http://lkml.kernel.org/r/20160926162025.21555-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: make full priority ignore pageblock suitability
Vlastimil Babka [Sat, 8 Oct 2016 00:00:37 +0000 (17:00 -0700)]
mm, compaction: make full priority ignore pageblock suitability

Several people have reported premature OOMs for order-2 allocations
(stack) due to OOM rework in 4.7.  In the scenario (parallel kernel
build and dd writing to two drives) many pageblocks get marked as
Unmovable and compaction free scanner struggles to isolate free pages.
Joonsoo Kim pointed out that the free scanner skips pageblocks that are
not movable to prevent filling them and forcing non-movable allocations
to fallback to other pageblocks.  Such heuristic makes sense to help
prevent long-term fragmentation, but premature OOMs are relatively more
urgent problem.  As a compromise, this patch disables the heuristic only
for the ultimate compaction priority.

Link: http://lkml.kernel.org/r/20160906135258.18335-5-vbabka@suse.cz
Reported-by: Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com>
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Reported-by: Olaf Hering <olaf@aepfle.de>
Suggested-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: restrict full priority to non-costly orders
Vlastimil Babka [Sat, 8 Oct 2016 00:00:34 +0000 (17:00 -0700)]
mm, compaction: restrict full priority to non-costly orders

The new ultimate compaction priority disables some heuristics, which may
result in excessive cost.  This is fine for non-costly orders where we
want to try hard before resulting for OOM, but might be disruptive for
costly orders which do not trigger OOM and should generally have some
fallback.  Thus, we disable the full priority for costly orders.

Suggested-by: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20160906135258.18335-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: more reliably increase direct compaction priority
Vlastimil Babka [Sat, 8 Oct 2016 00:00:31 +0000 (17:00 -0700)]
mm, compaction: more reliably increase direct compaction priority

During reclaim/compaction loop, compaction priority can be increased by
the should_compact_retry() function, but the current code is not
optimal.  Priority is only increased when compaction_failed() is true,
which means that compaction has scanned the whole zone.  This may not
happen even after multiple attempts with a lower priority due to
parallel activity, so we might needlessly struggle on the lower
priorities and possibly run out of compaction retry attempts in the
process.

After this patch we are guaranteed at least one attempt at the highest
compaction priority even if we exhaust all retries at the lower
priorities.

Link: http://lkml.kernel.org/r/20160906135258.18335-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoRevert "mm, oom: prevent premature OOM killer invocation for high order request"
Vlastimil Babka [Sat, 8 Oct 2016 00:00:28 +0000 (17:00 -0700)]
Revert "mm, oom: prevent premature OOM killer invocation for high order request"

Patch series "reintroduce compaction feedback for OOM decisions".

After several people reported OOM's for order-2 allocations in 4.7 due
to Michal Hocko's OOM rework, he reverted the part that considered
compaction feedback [1] in the decisions to retry reclaim/compaction.
This was to provide a fix quickly for 4.8 rc and 4.7 stable series,
while mmotm had an almost complete solution that instead improved
compaction reliability.

This series completes the mmotm solution and reintroduces the compaction
feedback into OOM decisions.  The first two patches restore the state of
mmotm before the temporary solution was merged, the last patch should be
the missing piece for reliability.  The third patch restricts the
hardened compaction to non-costly orders, since costly orders don't
result in OOMs in the first place.

[1] http://marc.info/?i=20160822093249.GA14916%40dhcp22.suse.cz%3E

This patch (of 4):

Commit 6b4e3181d7bd ("mm, oom: prevent premature OOM killer invocation
for high order request") was intended as a quick fix of OOM regressions
for 4.8 and stable 4.7.x kernels.  For a better long-term solution, we
still want to consider compaction feedback, which should be possible
after some more improvements in the following patches.

This reverts commit 6b4e3181d7bd5ca5ab6f45929e4a5ffa7ab4ab7f.

Link: http://lkml.kernel.org/r/20160906135258.18335-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: remove page_file_index
Huang Ying [Sat, 8 Oct 2016 00:00:24 +0000 (17:00 -0700)]
mm: remove page_file_index

After using the offset of the swap entry as the key of the swap cache,
the page_index() becomes exactly same as page_file_index().  So the
page_file_index() is removed and the callers are changed to use
page_index() instead.

Link: http://lkml.kernel.org/r/1473270649-27229-2-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, swap: use offset of swap entry as key of swap cache
Huang Ying [Sat, 8 Oct 2016 00:00:21 +0000 (17:00 -0700)]
mm, swap: use offset of swap entry as key of swap cache

This patch is to improve the performance of swap cache operations when
the type of the swap device is not 0.  Originally, the whole swap entry
value is used as the key of the swap cache, even though there is one
radix tree for each swap device.  If the type of the swap device is not
0, the height of the radix tree of the swap cache will be increased
unnecessary, especially on 64bit architecture.  For example, for a 1GB
swap device on the x86_64 architecture, the height of the radix tree of
the swap cache is 11.  But if the offset of the swap entry is used as
the key of the swap cache, the height of the radix tree of the swap
cache is 4.  The increased height causes unnecessary radix tree
descending and increased cache footprint.

This patch reduces the height of the radix tree of the swap cache via
using the offset of the swap entry instead of the whole swap entry value
as the key of the swap cache.  In 32 processes sequential swap out test
case on a Xeon E5 v3 system with RAM disk as swap, the lock contention
for the spinlock of the swap cache is reduced from 20.15% to 12.19%,
when the type of the swap device is 1.

Use the whole swap entry as key,

  perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 10.37,
  perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 9.78,

Use the swap offset as key,

  perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 6.25,
  perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 5.94,

Link: http://lkml.kernel.org/r/1473270649-27229-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: fix cache mode tracking in vm_insert_mixed()
Dan Williams [Sat, 8 Oct 2016 00:00:18 +0000 (17:00 -0700)]
mm: fix cache mode tracking in vm_insert_mixed()

vm_insert_mixed() unlike vm_insert_pfn_prot() and vmf_insert_pfn_pmd(),
fails to check the pgprot_t it uses for the mapping against the one
recorded in the memtype tracking tree.  Add the missing call to
track_pfn_insert() to preclude cases where incompatible aliased mappings
are established for a given physical address range.

Link: http://lkml.kernel.org/r/147328717909.35069.14256589123570653697.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomemory-hotplug: fix store_mem_state() return value
Reza Arbab [Sat, 8 Oct 2016 00:00:15 +0000 (17:00 -0700)]
memory-hotplug: fix store_mem_state() return value

If store_mem_state() is called to online memory which is already online,
it will return 1, the value it got from device_online().

This is wrong because store_mem_state() is a device_attribute .store
function.  Thus a non-negative return value represents input bytes read.

Set the return value to -EINVAL in this case.

Link: http://lkml.kernel.org/r/1472743777-24266-1-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/memcontrol.c: make the walk_page_range() limit obvious
James Morse [Sat, 8 Oct 2016 00:00:12 +0000 (17:00 -0700)]
mm/memcontrol.c: make the walk_page_range() limit obvious

mem_cgroup_count_precharge() and mem_cgroup_move_charge() both call
walk_page_range() on the range 0 to ~0UL, neither provide a pte_hole
callback, which causes the current implementation to skip non-vma
regions.  This is all fine but follow up changes would like to make
walk_page_range more generic so it is better to be explicit about which
range to traverse so let's use highest_vm_end to explicitly traverse
only user mmaped memory.

[mhocko@kernel.org: rewrote changelog]
Link: http://lkml.kernel.org/r/1472655897-22532-1-git-send-email-james.morse@arm.com
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agothp: reduce usage of huge zero page's atomic counter
Aaron Lu [Sat, 8 Oct 2016 00:00:08 +0000 (17:00 -0700)]
thp: reduce usage of huge zero page's atomic counter

The global zero page is used to satisfy an anonymous read fault.  If
THP(Transparent HugePage) is enabled then the global huge zero page is
used.  The global huge zero page uses an atomic counter for reference
counting and is allocated/freed dynamically according to its counter
value.

CPU time spent on that counter will greatly increase if there are a lot
of processes doing anonymous read faults.  This patch proposes a way to
reduce the access to the global counter so that the CPU load can be
reduced accordingly.

To do this, a new flag of the mm_struct is introduced:
MMF_USED_HUGE_ZERO_PAGE.  With this flag, the process only need to touch
the global counter in two cases:

 1 The first time it uses the global huge zero page;
 2 The time when mm_user of its mm_struct reaches zero.

Note that right now, the huge zero page is eligible to be freed as soon
as its last use goes away.  With this patch, the page will not be
eligible to be freed until the exit of the last process from which it
was ever used.

And with the use of mm_user, the kthread is not eligible to use huge
zero page either.  Since no kthread is using huge zero page today, there
is no difference after applying this patch.  But if that is not desired,
I can change it to when mm_count reaches zero.

Case used for test on Haswell EP:

  usemem -n 72 --readonly -j 0x200000 100G

Which spawns 72 processes and each will mmap 100G anonymous space and
then do read only access to that space sequentially with a step of 2MB.

  CPU cycles from perf report for base commit:
      54.03%  usemem   [kernel.kallsyms]   [k] get_huge_zero_page
  CPU cycles from perf report for this commit:
       0.11%  usemem   [kernel.kallsyms]   [k] mm_get_huge_zero_page

Performance(throughput) of the workload for base commit: 1784430792
Performance(throughput) of the workload for this commit: 4726928591
164% increase.

Runtime of the workload for base commit: 707592 us
Runtime of the workload for this commit: 303970 us
50% drop.

Link: http://lkml.kernel.org/r/fe51a88f-446a-4622-1363-ad1282d71385@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/proc/task_mmu.c: make the task_mmu walk_page_range() limit in clear_refs_write...
James Morse [Sat, 8 Oct 2016 00:00:06 +0000 (17:00 -0700)]
fs/proc/task_mmu.c: make the task_mmu walk_page_range() limit in clear_refs_write() obvious

Trying to walk all of virtual memory requires architecture specific
knowledge.  On x86_64, addresses must be sign extended from bit 48,
whereas on arm64 the top VA_BITS of address space have their own set of
page tables.

clear_refs_write() calls walk_page_range() on the range 0 to ~0UL, it
provides a test_walk() callback that only expects to be walking over
VMAs.  Currently walk_pmd_range() will skip memory regions that don't
have a VMA, reporting them as a hole.

As this call only expects to walk user address space, make it walk 0 to
'highest_vm_end'.

Link: http://lkml.kernel.org/r/1472655792-22439-1-git-send-email-james.morse@arm.com
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agocpu: fix node state for whether it contains CPU
Tim Chen [Sat, 8 Oct 2016 00:00:02 +0000 (17:00 -0700)]
cpu: fix node state for whether it contains CPU

In current kernel code, we only call node_set_state(cpu_to_node(cpu),
N_CPU) when a cpu is hot plugged.  But we do not set the node state for
N_CPU when the cpus are brought online during boot.

So this could lead to failure when we check to see if a node contains
cpu with node_state(node_id, N_CPU).

One use case is in the node_reclaime function:

        /*
         * Only run node reclaim on the local node or on nodes that do
         * not
         * have associated processors. This will favor the local
         * processor
         * over remote processors and spread off node memory allocations
         * as wide as possible.
         */
        if (node_state(pgdat->node_id, N_CPU) && pgdat->node_id !=
                numa_node_id())
                return NODE_RECLAIM_NOSCAN;

I instrumented the kernel to call this function after boot and it always
returns 0 on a x86 desktop machine until I apply the attached patch.

   int num_cpu_node(void)
   {
       int i, nr_cpu_nodes = 0;

       for_each_node(i) {
               if (node_state(i, N_CPU))
                       ++ nr_cpu_nodes;
       }

       return nr_cpu_nodes;
   }

Fix this by checking each node for online CPU when we initialize
vmstat that's responsible for maintaining node state.

Link: http://lkml.kernel.org/r/20160829175922.GA21775@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: <Huang@linux.intel.com>
Cc: Ying <ying.huang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoext2/4, xfs: call thp_get_unmapped_area() for pmd mappings
Toshi Kani [Fri, 7 Oct 2016 23:59:59 +0000 (16:59 -0700)]
ext2/4, xfs: call thp_get_unmapped_area() for pmd mappings

To support DAX pmd mappings with unmodified applications, filesystems
need to align an mmap address by the pmd size.

Call thp_get_unmapped_area() from f_op->get_unmapped_area.

Note, there is no change in behavior for a non-DAX file.

Link: http://lkml.kernel.org/r/1472497881-9323-3-git-send-email-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agothp, dax: add thp_get_unmapped_area for pmd mappings
Toshi Kani [Fri, 7 Oct 2016 23:59:56 +0000 (16:59 -0700)]
thp, dax: add thp_get_unmapped_area for pmd mappings

When CONFIG_FS_DAX_PMD is set, DAX supports mmap() using pmd page size.
This feature relies on both mmap virtual address and FS block (i.e.
physical address) to be aligned by the pmd page size.  Users can use
mkfs options to specify FS to align block allocations.  However,
aligning mmap address requires code changes to existing applications for
providing a pmd-aligned address to mmap().

For instance, fio with "ioengine=mmap" performs I/Os with mmap() [1].
It calls mmap() with a NULL address, which needs to be changed to
provide a pmd-aligned address for testing with DAX pmd mappings.
Changing all applications that call mmap() with NULL is undesirable.

Add thp_get_unmapped_area(), which can be called by filesystem's
get_unmapped_area to align an mmap address by the pmd size for a DAX
file.  It calls the default handler, mm->get_unmapped_area(), to find a
range and then aligns it for a DAX file.

The patch is based on Matthew Wilcox's change that allows adding support
of the pud page size easily.

[1]: https://github.com/axboe/fio/blob/master/engines/mmap.c
Link: http://lkml.kernel.org/r/1472497881-9323-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoselftests: expanding more mlock selftest
Simon Guo [Fri, 7 Oct 2016 23:59:52 +0000 (16:59 -0700)]
selftests: expanding more mlock selftest

This patch will randomly perform mlock/mlock2 on a given memory region,
and verify the RLIMIT_MEMLOCK limitation works properly.

Suggested-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1473325970-11393-4-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoselftest: move seek_to_smaps_entry() out of mlock2-tests.c
Simon Guo [Fri, 7 Oct 2016 23:59:49 +0000 (16:59 -0700)]
selftest: move seek_to_smaps_entry() out of mlock2-tests.c

Function seek_to_smaps_entry() can be useful for other selftest
functionalities, so move it out to header file.

Link: http://lkml.kernel.org/r/1473325970-11393-3-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoselftests/vm: add test for mlock() when areas are intersected
Simon Guo [Fri, 7 Oct 2016 23:59:46 +0000 (16:59 -0700)]
selftests/vm: add test for mlock() when areas are intersected

This patch adds mlock() test for multiple invocation on the same address
area, and verify it doesn't mess the rlimit mlock limitation.

Link: http://lkml.kernel.org/r/1472554781-9835-5-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoselftest: split mlock2_ funcs into separate mlock2.h
Simon Guo [Fri, 7 Oct 2016 23:59:43 +0000 (16:59 -0700)]
selftest: split mlock2_ funcs into separate mlock2.h

To prepare mlock2.h whose functionality will be reused.

Link: http://lkml.kernel.org/r/1472554781-9835-4-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: mlock: avoid increase mm->locked_vm on mlock() when already mlock2(,MLOCK_ONFAULT)
Simon Guo [Fri, 7 Oct 2016 23:59:40 +0000 (16:59 -0700)]
mm: mlock: avoid increase mm->locked_vm on mlock() when already mlock2(,MLOCK_ONFAULT)

When one vma was with flag VM_LOCKED|VM_LOCKONFAULT (by invoking
mlock2(,MLOCK_ONFAULT)), it can again be populated with mlock() with
VM_LOCKED flag only.

There is a hole in mlock_fixup() which increase mm->locked_vm twice even
the two operations are on the same vma and both with VM_LOCKED flags.

The issue can be reproduced by following code:

  mlock2(p, 1024 * 64, MLOCK_ONFAULT); //VM_LOCKED|VM_LOCKONFAULT
  mlock(p, 1024 * 64);  //VM_LOCKED

Then check the increase VmLck field in /proc/pid/status(to 128k).

When vma is set with different vm_flags, and the new vm_flags is with
VM_LOCKED, it is not necessarily be a "new locked" vma.  This patch
corrects this bug by prevent mm->locked_vm from increment when old
vm_flags is already VM_LOCKED.

Link: http://lkml.kernel.org/r/1472554781-9835-3-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: mlock: check against vma for actual mlock() size
Simon Guo [Fri, 7 Oct 2016 23:59:36 +0000 (16:59 -0700)]
mm: mlock: check against vma for actual mlock() size

In do_mlock(), the check against locked memory limitation has a hole
which will fail following cases at step 3):

 1) User has a memory chunk from addressA with 50k, and user mem lock
    rlimit is 64k.
 2) mlock(addressA, 30k)
 3) mlock(addressA, 40k)

The 3rd step should have been allowed since the 40k request is
intersected with the previous 30k at step 2), and the 3rd step is
actually for mlock on the extra 10k memory.

This patch checks vma to caculate the actual "new" mlock size, if
necessary, and ajust the logic to fix this issue.

[akpm@linux-foundation.org: clean up comment layout]
[wei.guo.simon@gmail.com: correct a typo in count_mm_mlocked_page_nr()]
Link: http://lkml.kernel.org/r/1473325970-11393-2-git-send-email-wei.guo.simon@gmail.com
Link: http://lkml.kernel.org/r/1472554781-9835-2-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agooom: warn if we go OOM for higher order and compaction is disabled
Michal Hocko [Fri, 7 Oct 2016 23:59:33 +0000 (16:59 -0700)]
oom: warn if we go OOM for higher order and compaction is disabled

Since the lumpy reclaim is gone there is no source of higher order pages
if CONFIG_COMPACTION=n except for the order-0 pages reclaim which is
unreliable for that purpose to say the least.  Hitting an OOM for
!costly higher order requests is therefore all not that hard to imagine.
We are trying hard to not invoke OOM killer as much as possible but
there is simply no reliable way to detect whether more reclaim retries
make sense.

Disabling COMPACTION is not widespread but it seems that some users
might have disable the feature without realizing full consequences
(mostly along with disabling THP because compaction used to be THP
mainly thing).  This patch just adds a note if the OOM killer was
triggered by higher order request with compaction disabled.  This will
help us identifying possible misconfiguration right from the oom report
which is easier than to always keep in mind that somebody might have
disabled COMPACTION without a good reason.

Link: http://lkml.kernel.org/r/20160830111632.GD23963@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: don't use radix tree writeback tags for pages in swap cache
Huang Ying [Fri, 7 Oct 2016 23:59:30 +0000 (16:59 -0700)]
mm: don't use radix tree writeback tags for pages in swap cache

File pages use a set of radix tree tags (DIRTY, TOWRITE, WRITEBACK,
etc.) to accelerate finding the pages with a specific tag in the radix
tree during inode writeback.  But for anonymous pages in the swap cache,
there is no inode writeback.  So there is no need to find the pages with
some writeback tags in the radix tree.  It is not necessary to touch
radix tree writeback tags for pages in the swap cache.

Per Rik van Riel's suggestion, a new flag AS_NO_WRITEBACK_TAGS is
introduced for address spaces which don't need to update the writeback
tags.  The flag is set for swap caches.  It may be used for DAX file
systems, etc.

With this patch, the swap out bandwidth improved 22.3% (from ~1.2GB/s to
~1.48GBps) in the vm-scalability swap-w-seq test case with 8 processes.
The test is done on a Xeon E5 v3 system.  The swap device used is a RAM
simulated PMEM (persistent memory) device.  The improvement comes from
the reduced contention on the swap cache radix tree lock.  To test
sequential swapping out, the test case uses 8 processes, which
sequentially allocate and write to the anonymous pages until RAM and
part of the swap device is used up.

Details of comparison is as follow,

base             base+patch
---------------- --------------------------
         %stddev     %change         %stddev
             \          |                \
   2506952 Â±  2%     +28.1%    3212076 Â±  7%  vm-scalability.throughput
   1207402 Â±  7%     +22.3%    1476578 Â±  6%  vmstat.swap.so
     10.86 Â± 12%     -23.4%       8.31 Â± 16%  perf-profile.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list
     10.82 Â± 13%     -33.1%       7.24 Â± 14%  perf-profile.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_zone_memcg
     10.36 Â± 11%    -100.0%       0.00 Â± -1%  perf-profile.cycles-pp._raw_spin_lock_irqsave.__test_set_page_writeback.bdev_write_page.__swap_writepage.swap_writepage
     10.52 Â± 12%    -100.0%       0.00 Â± -1%  perf-profile.cycles-pp._raw_spin_lock_irqsave.test_clear_page_writeback.end_page_writeback.page_endio.pmem_rw_page

Link: http://lkml.kernel.org/r/1472578089-5560-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/bootmem.c: replace kzalloc() by kzalloc_node()
zijun_hu [Fri, 7 Oct 2016 23:59:27 +0000 (16:59 -0700)]
mm/bootmem.c: replace kzalloc() by kzalloc_node()

In ___alloc_bootmem_node_nopanic(), replace kzalloc() by kzalloc_node()
in order to allocate memory within given node preferentially when slab
is available

Link: http://lkml.kernel.org/r/1f487f12-6af4-5e4f-a28c-1de2361cdcd8@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/nobootmem.c: remove duplicate macro ARCH_LOW_ADDRESS_LIMIT statements
zijun_hu [Fri, 7 Oct 2016 23:59:24 +0000 (16:59 -0700)]
mm/nobootmem.c: remove duplicate macro ARCH_LOW_ADDRESS_LIMIT statements

Fix the following bugs:

 - the same ARCH_LOW_ADDRESS_LIMIT statements are duplicated between
   header and relevant source

 - don't ensure ARCH_LOW_ADDRESS_LIMIT perhaps defined by ARCH in
   asm/processor.h is preferred over default in linux/bootmem.h
   completely since the former header isn't included by the latter

Link: http://lkml.kernel.org/r/e046aeaa-e160-6d9e-dc1b-e084c2fd999f@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agopowerpc: implement arch_reserved_kernel_pages
Srikar Dronamraju [Fri, 7 Oct 2016 23:59:21 +0000 (16:59 -0700)]
powerpc: implement arch_reserved_kernel_pages

Currently significant amount of memory is reserved only in kernel booted
to capture kernel dump using the fa_dump method.

Kernels compiled with CONFIG_DEFERRED_STRUCT_PAGE_INIT will initialize
only certain size memory per node.  The certain size takes into account
the dentry and inode cache sizes.  Currently the cache sizes are
calculated based on the total system memory including the reserved
memory.  However such a kernel when booting the same kernel as fadump
kernel will not be able to allocate the required amount of memory to
suffice for the dentry and inode caches.  This results in crashes like

Hence only implement arch_reserved_kernel_pages() for CONFIG_FA_DUMP
configurations.  The amount reserved will be reduced while calculating
the large caches and will avoid crashes like the below on large systems
such as 32 TB systems.

  Dentry cache hash table entries: 536870912 (order: 16, 4294967296 bytes)
  vmalloc: allocation failure, allocated 4097114112 of 17179934720 bytes
  swapper/0: page allocation failure: order:0, mode:0x2080020(GFP_ATOMIC)
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6-master+ #3
  Call Trace:
     dump_stack+0xb0/0xf0 (unreliable)
     warn_alloc_failed+0x114/0x160
     __vmalloc_node_range+0x304/0x340
     __vmalloc+0x6c/0x90
     alloc_large_system_hash+0x1b8/0x2c0
     inode_init+0x94/0xe4
     vfs_caches_init+0x8c/0x13c
     start_kernel+0x50c/0x578
     start_here_common+0x20/0xa8

Link: http://lkml.kernel.org/r/1472476010-4709-4-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/memblock.c: expose total reserved memory
Srikar Dronamraju [Fri, 7 Oct 2016 23:59:18 +0000 (16:59 -0700)]
mm/memblock.c: expose total reserved memory

The total reserved memory in a system is accounted but not available for
use use outside mm/memblock.c.  By exposing the total reserved memory,
systems can better calculate the size of large hashes.

Link: http://lkml.kernel.org/r/1472476010-4709-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: introduce arch_reserved_kernel_pages()
Srikar Dronamraju [Fri, 7 Oct 2016 23:59:15 +0000 (16:59 -0700)]
mm: introduce arch_reserved_kernel_pages()

Currently arch specific code can reserve memory blocks but
alloc_large_system_hash() may not take it into consideration when sizing
the hashes.  This can lead to bigger hash than required and lead to no
available memory for other purposes.  This is specifically true for
systems with CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled.

One approach to solve this problem would be to walk through the memblock
regions and calculate the available memory and base the size of hash
system on the available memory.

The other approach would be to depend on the architecture to provide the
number of pages that are reserved.  This change provides hooks to allow
the architecture to provide the required info.

Link: http://lkml.kernel.org/r/1472476010-4709-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: use zonelist name instead of using hardcoded index
Aneesh Kumar K.V [Fri, 7 Oct 2016 23:59:12 +0000 (16:59 -0700)]
mm: use zonelist name instead of using hardcoded index

Use the existing enums instead of hardcoded index when looking at the
zonelist.  This makes it more readable.  No functionality change by this
patch.

Link: http://lkml.kernel.org/r/1472227078-24852-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agooom, oom_reaper: allow to reap mm shared by the kthreads
Michal Hocko [Fri, 7 Oct 2016 23:59:09 +0000 (16:59 -0700)]
oom, oom_reaper: allow to reap mm shared by the kthreads

oom reaper was skipped for an mm which is shared with the kernel thread
(aka use_mm()).  The primary concern was that such a kthread might want
to read from the userspace memory and see zero page as a result of the
oom reaper action.  This is no longer a problem after "mm: make sure
that kthreads will not refault oom reaped memory" because any attempt to
fault in when the MMF_UNSTABLE is set will result in SIGBUS and so the
target user should see an error.  This means that we can finally allow
oom reaper also to tasks which share their mm with kthreads.

Link: http://lkml.kernel.org/r/1472119394-11342-10-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: make sure that kthreads will not refault oom reaped memory
Michal Hocko [Fri, 7 Oct 2016 23:59:06 +0000 (16:59 -0700)]
mm: make sure that kthreads will not refault oom reaped memory

There are only few use_mm() users in the kernel right now.  Most of them
write to the target memory but vhost driver relies on
copy_from_user/get_user from a kernel thread context.  This makes it
impossible to reap the memory of an oom victim which shares the mm with
the vhost kernel thread because it could see a zero page unexpectedly
and theoretically make an incorrect decision visible outside of the
killed task context.

To quote Michael S. Tsirkin:
: Getting an error from __get_user and friends is handled gracefully.
: Getting zero instead of a real value will cause userspace
: memory corruption.

The vhost kernel thread is bound to an open fd of the vhost device which
is not tight to the mm owner life cycle in general.  The device fd can
be inherited or passed over to another process which means that we
really have to be careful about unexpected memory corruption because
unlike for normal oom victims the result will be visible outside of the
oom victim context.

Make sure that no kthread context (users of use_mm) can ever see
corrupted data because of the oom reaper and hook into the page fault
path by checking MMF_UNSTABLE mm flag.  __oom_reap_task_mm will set the
flag before it starts unmapping the address space while the flag is
checked after the page fault has been handled.  If the flag is set then
SIGBUS is triggered so any g-u-p user will get a error code.

Regular tasks do not need this protection because all which share the mm
are killed when the mm is reaped and so the corruption will not outlive
them.

This patch shouldn't have any visible effect at this moment because the
OOM killer doesn't invoke oom reaper for tasks with mm shared with
kthreads yet.

Link: http://lkml.kernel.org/r/1472119394-11342-9-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, oom: enforce exit_oom_victim on current task
Tetsuo Handa [Fri, 7 Oct 2016 23:59:03 +0000 (16:59 -0700)]
mm, oom: enforce exit_oom_victim on current task

There are no users of exit_oom_victim on !current task anymore so enforce
the API to always work on the current.

Link: http://lkml.kernel.org/r/1472119394-11342-8-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agooom, suspend: fix oom_killer_disable vs. pm suspend properly
Michal Hocko [Fri, 7 Oct 2016 23:59:00 +0000 (16:59 -0700)]
oom, suspend: fix oom_killer_disable vs. pm suspend properly

Commit 74070542099c ("oom, suspend: fix oom_reaper vs.
oom_killer_disable race") has workaround an existing race between
oom_killer_disable and oom_reaper by adding another round of
try_to_freeze_tasks after the oom killer was disabled.  This was the
easiest thing to do for a late 4.7 fix.  Let's fix it properly now.

After "oom: keep mm of the killed task available" we no longer have to
call exit_oom_victim from the oom reaper because we have stable mm
available and hide the oom_reaped mm by MMF_OOM_SKIP flag.  So let's
remove exit_oom_victim and the race described in the above commit
doesn't exist anymore if.

Unfortunately this alone is not sufficient for the oom_killer_disable
usecase because now we do not have any reliable way to reach
exit_oom_victim (the victim might get stuck on a way to exit for an
unbounded amount of time).  OOM killer can cope with that by checking mm
flags and move on to another victim but we cannot do the same for
oom_killer_disable as we would lose the guarantee of no further
interference of the victim with the rest of the system.  What we can do
instead is to cap the maximum time the oom_killer_disable waits for
victims.  The only current user of this function (pm suspend) already
has a concept of timeout for back off so we can reuse the same value
there.

Let's drop set_freezable for the oom_reaper kthread because it is no
longer needed as the reaper doesn't wake or thaw any processes.

Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, oom: get rid of signal_struct::oom_victims
Michal Hocko [Fri, 7 Oct 2016 23:58:57 +0000 (16:58 -0700)]
mm, oom: get rid of signal_struct::oom_victims

After "oom: keep mm of the killed task available" we can safely detect
an oom victim by checking task->signal->oom_mm so we do not need the
signal_struct counter anymore so let's get rid of it.

This alone wouldn't be sufficient for nommu archs because
exit_oom_victim doesn't hide the process from the oom killer anymore.
We can, however, mark the mm with a MMF flag in __mmput.  We can reuse
MMF_OOM_REAPED and rename it to a more generic MMF_OOM_SKIP.

Link: http://lkml.kernel.org/r/1472119394-11342-6-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agokernel, oom: fix potential pgd_lock deadlock from __mmdrop
Michal Hocko [Fri, 7 Oct 2016 23:58:54 +0000 (16:58 -0700)]
kernel, oom: fix potential pgd_lock deadlock from __mmdrop

Lockdep complains that __mmdrop is not safe from the softirq context:

  =================================
  [ INFO: inconsistent lock state ]
  4.6.0-oomfortification2-00011-geeb3eadeab96-dirty #949 Tainted: G        W
  ---------------------------------
  inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
  swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
   (pgd_lock){+.?...}, at: pgd_free+0x19/0x6b
  {SOFTIRQ-ON-W} state was registered at:
     __lock_acquire+0xa06/0x196e
     lock_acquire+0x139/0x1e1
     _raw_spin_lock+0x32/0x41
     __change_page_attr_set_clr+0x2a5/0xacd
     change_page_attr_set_clr+0x16f/0x32c
     set_memory_nx+0x37/0x3a
     free_init_pages+0x9e/0xc7
     alternative_instructions+0xa2/0xb3
     check_bugs+0xe/0x2d
     start_kernel+0x3ce/0x3ea
     x86_64_start_reservations+0x2a/0x2c
     x86_64_start_kernel+0x17a/0x18d
  irq event stamp: 105916
  hardirqs last  enabled at (105916): free_hot_cold_page+0x37e/0x390
  hardirqs last disabled at (105915): free_hot_cold_page+0x2c1/0x390
  softirqs last  enabled at (105878): _local_bh_enable+0x42/0x44
  softirqs last disabled at (105879): irq_exit+0x6f/0xd1

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(pgd_lock);
    <Interrupt>
      lock(pgd_lock);

   *** DEADLOCK ***

  1 lock held by swapper/1/0:
   #0:  (rcu_callback){......}, at: rcu_process_callbacks+0x390/0x800

  stack backtrace:
  CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.6.0-oomfortification2-00011-geeb3eadeab96-dirty #949
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
  Call Trace:
   <IRQ>
    print_usage_bug.part.25+0x259/0x268
    mark_lock+0x381/0x567
    __lock_acquire+0x993/0x196e
    lock_acquire+0x139/0x1e1
    _raw_spin_lock+0x32/0x41
    pgd_free+0x19/0x6b
    __mmdrop+0x25/0xb9
    __put_task_struct+0x103/0x11e
    delayed_put_task_struct+0x157/0x15e
    rcu_process_callbacks+0x660/0x800
    __do_softirq+0x1ec/0x4d5
    irq_exit+0x6f/0xd1
    smp_apic_timer_interrupt+0x42/0x4d
    apic_timer_interrupt+0x8e/0xa0
   <EOI>
    arch_cpu_idle+0xf/0x11
    default_idle_call+0x32/0x34
    cpu_startup_entry+0x20c/0x399
    start_secondary+0xfe/0x101

More over commit a79e53d85683 ("x86/mm: Fix pgd_lock deadlock") was
explicit about pgd_lock not to be called from the irq context.  This
means that __mmdrop called from free_signal_struct has to be postponed
to a user context.  We already have a similar mechanism for mmput_async
so we can use it here as well.  This is safe because mm_count is pinned
by mm_users.

This fixes bug introduced by "oom: keep mm of the killed task available"

Link: http://lkml.kernel.org/r/1472119394-11342-5-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agooom: keep mm of the killed task available
Michal Hocko [Fri, 7 Oct 2016 23:58:51 +0000 (16:58 -0700)]
oom: keep mm of the killed task available

oom_reap_task has to call exit_oom_victim in order to make sure that the
oom vicim will not block the oom killer for ever.  This is, however,
opening new problems (e.g oom_killer_disable exclusion - see commit
74070542099c ("oom, suspend: fix oom_reaper vs.  oom_killer_disable
race")).  exit_oom_victim should be only called from the victim's
context ideally.

One way to achieve this would be to rely on per mm_struct flags.  We
already have MMF_OOM_REAPED to hide a task from the oom killer since
"mm, oom: hide mm which is shared with kthread or global init". The
problem is that the exit path:

  do_exit
    exit_mm
      tsk->mm = NULL;
      mmput
        __mmput
      exit_oom_victim

doesn't guarantee that exit_oom_victim will get called in a bounded
amount of time.  At least exit_aio depends on IO which might get blocked
due to lack of memory and who knows what else is lurking there.

This patch takes a different approach.  We remember tsk->mm into the
signal_struct and bind it to the signal struct life time for all oom
victims.  __oom_reap_task_mm as well as oom_scan_process_thread do not
have to rely on find_lock_task_mm anymore and they will have a reliable
reference to the mm struct.  As a result all the oom specific
communication inside the OOM killer can be done via tsk->signal->oom_mm.

Increasing the signal_struct for something as unlikely as the oom killer
is far from ideal but this approach will make the code much more
reasonable and long term we even might want to move task->mm into the
signal_struct anyway.  In the next step we might want to make the oom
killer exclusion and access to memory reserves completely independent
which would be also nice.

Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm,oom_reaper: do not attempt to reap a task twice
Tetsuo Handa [Fri, 7 Oct 2016 23:58:48 +0000 (16:58 -0700)]
mm,oom_reaper: do not attempt to reap a task twice

"mm, oom_reaper: do not attempt to reap a task twice" tried to give the
OOM reaper one more chance to retry using MMF_OOM_NOT_REAPABLE flag.
But the usefulness of the flag is rather limited and actually never
shown in practice.  If the flag is set, it means that the holder of
mm->mmap_sem cannot call up_write() due to presumably being blocked at
unkillable wait waiting for other thread's memory allocation.  But since
one of threads sharing that mm will queue that mm immediately via
task_will_free_mem() shortcut (otherwise, oom_badness() will select the
same mm again due to oom_score_adj value unchanged), retrying
MMF_OOM_NOT_REAPABLE mm is unlikely helpful.

Let's always set MMF_OOM_REAPED.

Link: http://lkml.kernel.org/r/1472119394-11342-3-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm,oom_reaper: reduce find_lock_task_mm() usage
Tetsuo Handa [Fri, 7 Oct 2016 23:58:45 +0000 (16:58 -0700)]
mm,oom_reaper: reduce find_lock_task_mm() usage

Patch series "fortify oom killer even more", v2.

This patch (of 9):

__oom_reap_task() can be simplified a bit if it receives a valid mm from
oom_reap_task() which also uses that mm when __oom_reap_task() failed.
We can drop one find_lock_task_mm() call and also make the
__oom_reap_task() code flow easier to follow.  Moreover, this will make
later patch in the series easier to review.  Pinning mm's mm_count for
longer time is not really harmful because this will not pin much memory.

This patch doesn't introduce any functional change.

Link: http://lkml.kernel.org/r/1472119394-11342-2-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, swap: add swap_cluster_list
Huang Ying [Fri, 7 Oct 2016 23:58:42 +0000 (16:58 -0700)]
mm, swap: add swap_cluster_list

This is a code clean up patch without functionality changes.  The
swap_cluster_list data structure and its operations are introduced to
provide some better encapsulation for the free cluster and discard
cluster list operations.  This avoid some code duplication, improved the
code readability, and reduced the total line number.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1472067356-16004-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: unrig VMA cache hit ratio
Alexey Dobriyan [Fri, 7 Oct 2016 23:58:39 +0000 (16:58 -0700)]
mm: unrig VMA cache hit ratio

Current code doesn't count first FIND operation after VMA cache flush
(which happen surprisingly often) artificially increasing cache hit ratio.

On my regular setup the difference is:

Before After
==========================================================

* boot, login into KDE

vmacache_find_calls 446216 vmacache_find_calls 492741
vmacache_find_hits 277596 vmacache_find_hits 276096

~62.2% ~56.0%

* rebuild kernel (no changes to code, usual config)

vmacache_find_calls 1943007 vmacache_find_calls 2083718
vmacache_find_hits 1246123 vmacache_find_hits 1244146

~64.1% ~59.7%

* rebuild kernel (full rebuild, usual config)

vmacache_find_calls 32163155 vmacache_find_calls 33677183
vmacache_find_hits 27889956 vmacache_find_hits 27877591

~88.2% ~84.3%

Total: ~4% cache hit ratio.

If someone is counting _relative_ cache _miss_ ratio, misreporting is much
higher.

Link: http://lkml.kernel.org/r/20160822225009.GA3934@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: pagewalk: fix the comment for test_walk
James Morse [Fri, 7 Oct 2016 23:58:36 +0000 (16:58 -0700)]
mm: pagewalk: fix the comment for test_walk

Modify the comment describing struct mm_walk->test_walk()s behaviour to
match the comment on walk_page_test() and the behaviour of
walk_page_vma().

Fixes: fafaa4264eba4 ("pagewalk: improve vma handling")
Link: http://lkml.kernel.org/r/1471622518-21980-1-git-send-email-james.morse@arm.com
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodo_generic_file_read(): fail immediately if killed
Bart Van Assche [Fri, 7 Oct 2016 23:58:33 +0000 (16:58 -0700)]
do_generic_file_read(): fail immediately if killed

If a fatal signal has been received, fail immediately instead of trying
to read more data.

If wait_on_page_locked_killable() was interrupted then this page is most
likely is not PageUptodate() and in this case do_generic_file_read()
will fail after lock_page_killable().

See also commit ebded02788b5 ("mm: filemap: avoid unnecessary calls to
lock_page when waiting for IO to complete during a read")

[oleg@redhat.com: changelog addition]
Link: http://lkml.kernel.org/r/63068e8e-8bee-b208-8441-a3c39a9d9eb6@sandisk.com
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/page_owner: don't define fields on struct page_ext by hard-coding
Joonsoo Kim [Fri, 7 Oct 2016 23:58:30 +0000 (16:58 -0700)]
mm/page_owner: don't define fields on struct page_ext by hard-coding

There is a memory waste problem if we define field on struct page_ext by
hard-coding.  Entry size of struct page_ext includes the size of those
fields even if it is disabled at runtime.  Now, extra memory request at
runtime is possible so page_owner don't need to define it's own fields
by hard-coding.

This patch removes hard-coded define and uses extra memory for storing
page_owner information in page_owner.  Most of code are just mechanical
changes.

Link: http://lkml.kernel.org/r/1471315879-32294-7-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/page_ext: support extra space allocation by page_ext user
Joonsoo Kim [Fri, 7 Oct 2016 23:58:27 +0000 (16:58 -0700)]
mm/page_ext: support extra space allocation by page_ext user

Until now, if some page_ext users want to use it's own field on
page_ext, it should be defined in struct page_ext by hard-coding.  It
has a problem that wastes memory in following situation.

  struct page_ext {
   #ifdef CONFIG_A
   int a;
   #endif
   #ifdef CONFIG_B
   int b;
   #endif
  };

Assume that kernel is built with both CONFIG_A and CONFIG_B.  Even if we
enable feature A and doesn't enable feature B at runtime, each entry of
struct page_ext takes two int rather than one int.  It's undesirable
result so this patch tries to fix it.

To solve above problem, this patch implements to support extra space
allocation at runtime.  When need() callback returns true, it's extra
memory requirement is summed to entry size of page_ext.  Also, offset
for each user's extra memory space is returned.  With this offset, user
can use this extra space and there is no need to define needed field on
page_ext by hard-coding.

This patch only implements an infrastructure.  Following patch will use
it for page_owner which is only user having it's own fields on page_ext.

Link: http://lkml.kernel.org/r/1471315879-32294-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/page_ext: rename offset to index
Joonsoo Kim [Fri, 7 Oct 2016 23:58:24 +0000 (16:58 -0700)]
mm/page_ext: rename offset to index

Here, 'offset' means entry index in page_ext array.  Following patch
will use 'offset' for field offset in each entry so rename current
'offset' to prevent confusion.

Link: http://lkml.kernel.org/r/1471315879-32294-5-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/page_owner: move page_owner specific function to page_owner.c
Joonsoo Kim [Fri, 7 Oct 2016 23:58:21 +0000 (16:58 -0700)]
mm/page_owner: move page_owner specific function to page_owner.c

There is no reason that page_owner specific function resides on
vmstat.c.

Link: http://lkml.kernel.org/r/1471315879-32294-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/debug_pagealloc.c: don't allocate page_ext if we don't use guard page
Joonsoo Kim [Fri, 7 Oct 2016 23:58:18 +0000 (16:58 -0700)]
mm/debug_pagealloc.c: don't allocate page_ext if we don't use guard page

What debug_pagealloc does is just mapping/unmapping page table.
Basically, it doesn't need additional memory space to memorize
something.  But, with guard page feature, it requires additional memory
to distinguish if the page is for guard or not.  Guard page is only used
when debug_guardpage_minorder is non-zero so this patch removes
additional memory allocation (page_ext) if debug_guardpage_minorder is
zero.

It saves memory if we just use debug_pagealloc and not guard page.

Link: http://lkml.kernel.org/r/1471315879-32294-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/debug_pagealloc.c: clean-up guard page handling code
Joonsoo Kim [Fri, 7 Oct 2016 23:58:15 +0000 (16:58 -0700)]
mm/debug_pagealloc.c: clean-up guard page handling code

Patch series "Reduce memory waste by page extension user".

This patchset tries to reduce memory waste by page extension user.

First case is architecture supported debug_pagealloc.  It doesn't
requires additional memory if guard page isn't used.  8 bytes per page
will be saved in this case.

Second case is related to page owner feature.  Until now, if page_ext
users want to use it's own fields on page_ext, fields should be defined
in struct page_ext by hard-coding.  It has a following problem.

  struct page_ext {
   #ifdef CONFIG_A
   int a;
   #endif
   #ifdef CONFIG_B
int b;
   #endif
  };

Assume that kernel is built with both CONFIG_A and CONFIG_B.  Even if we
enable feature A and doesn't enable feature B at runtime, each entry of
struct page_ext takes two int rather than one int.  It's undesirable
waste so this patch tries to reduce it.  By this patchset, we can save
20 bytes per page dedicated for page owner feature in some
configurations.

This patch (of 6):

We can make code clean by moving decision condition for set_page_guard()
into set_page_guard() itself.  It will help code readability.  There is
no functional change.

Link: http://lkml.kernel.org/r/1471315879-32294-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, vmscan: get rid of throttle_vm_writeout
Michal Hocko [Fri, 7 Oct 2016 23:58:12 +0000 (16:58 -0700)]
mm, vmscan: get rid of throttle_vm_writeout

throttle_vm_writeout() was introduced back in 2005 to fix OOMs caused by
excessive pageout activity during the reclaim.  Too many pages could be
put under writeback therefore LRUs would be full of unreclaimable pages
until the IO completes and in turn the OOM killer could be invoked.

There have been some important changes introduced since then in the
reclaim path though.  Writers are throttled by balance_dirty_pages when
initiating the buffered IO and later during the memory pressure, the
direct reclaim is throttled by wait_iff_congested if the node is
considered congested by dirty pages on LRUs and the underlying bdi is
congested by the queued IO.  The kswapd is throttled as well if it
encounters pages marked for immediate reclaim or under writeback which
signals that that there are too many pages under writeback already.
Finally should_reclaim_retry does congestion_wait if the reclaim cannot
make any progress and there are too many dirty/writeback pages.

Another important aspect is that we do not issue any IO from the direct
reclaim context anymore.  In a heavy parallel load this could queue a
lot of IO which would be very scattered and thus unefficient which would
just make the problem worse.

This three mechanisms should throttle and keep the amount of IO in a
steady state even under heavy IO and memory pressure so yet another
throttling point doesn't really seem helpful.  Quite contrary, Mikulas
Patocka has reported that swap backed by dm-crypt doesn't work properly
because the swapout IO cannot make sufficient progress as the writeout
path depends on dm_crypt worker which has to allocate memory to perform
the encryption.  In order to guarantee a forward progress it relies on
the mempool allocator.  mempool_alloc(), however, prefers to use the
underlying (usually page) allocator before it grabs objects from the
pool.  Such an allocation can dive into the memory reclaim and
consequently to throttle_vm_writeout.  If there are too many dirty or
pages under writeback it will get throttled even though it is in fact a
flusher to clear pending pages.

  kworker/u4:0    D ffff88003df7f438 10488     6      2 0x00000000
  Workqueue: kcryptd kcryptd_crypt [dm_crypt]
  Call Trace:
    schedule+0x3c/0x90
    schedule_timeout+0x1d8/0x360
    io_schedule_timeout+0xa4/0x110
    congestion_wait+0x86/0x1f0
    throttle_vm_writeout+0x44/0xd0
    shrink_zone_memcg+0x613/0x720
    shrink_zone+0xe0/0x300
    do_try_to_free_pages+0x1ad/0x450
    try_to_free_pages+0xef/0x300
    __alloc_pages_nodemask+0x879/0x1210
    alloc_pages_current+0xa1/0x1f0
    new_slab+0x2d7/0x6a0
    ___slab_alloc+0x3fb/0x5c0
    __slab_alloc+0x51/0x90
    kmem_cache_alloc+0x27b/0x310
    mempool_alloc_slab+0x1d/0x30
    mempool_alloc+0x91/0x230
    bio_alloc_bioset+0xbd/0x260
    kcryptd_crypt+0x114/0x3b0 [dm_crypt]

Let's just drop throttle_vm_writeout altogether.  It is not very much
helpful anymore.

I have tried to test a potential writeback IO runaway similar to the one
described in the original patch which has introduced that [1].  Small
virtual machine (512MB RAM, 4 CPUs, 2G of swap space and disk image on a
rather slow NFS in a sync mode on the host) with 8 parallel writers each
writing 1G worth of data.  As soon as the pagecache fills up and the
direct reclaim hits then I start anon memory consumer in a loop
(allocating 300M and exiting after populating it) in the background to
make the memory pressure even stronger as well as to disrupt the steady
state for the IO.  The direct reclaim is throttled because of the
congestion as well as kswapd hitting congestion_wait due to nr_immediate
but throttle_vm_writeout doesn't ever trigger the sleep throughout the
test.  Dirty+writeback are close to nr_dirty_threshold with some
fluctuations caused by the anon consumer.

[1] https://www2.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc1/2.6.9-rc1-mm3/broken-out/vm-pageout-throttling.patch
Link: http://lkml.kernel.org/r/1471171473-21418-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: fix set pageblock migratetype in deferred struct page init
Xishi Qiu [Fri, 7 Oct 2016 23:58:09 +0000 (16:58 -0700)]
mm: fix set pageblock migratetype in deferred struct page init

On x86_64 MAX_ORDER_NR_PAGES is usually 4M, and a pageblock is usually
2M, so we only set one pageblock's migratetype in deferred_free_range()
if pfn is aligned to MAX_ORDER_NR_PAGES.  That means it causes
uninitialized migratetype blocks, you can see from "cat
/proc/pagetypeinfo", almost half blocks are Unmovable.

Also we missed freeing the last block in deferred_init_memmap(), it
causes memory leak.

Fixes: ac5d2539b238 ("mm: meminit: reduce number of times pageblocks are set during struct page init")
Link: http://lkml.kernel.org/r/57A3260F.4050709@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomem-hotplug: fix node spanned pages when we have a movable node
Xishi Qiu [Fri, 7 Oct 2016 23:58:06 +0000 (16:58 -0700)]
mem-hotplug: fix node spanned pages when we have a movable node

Commit 342332e6a925 ("mm/page_alloc.c: introduce kernelcore=mirror
option") rewrote the calculation of node spanned pages.  But when we
have a movable node, the size of node spanned pages is double added.
That's because we have an empty normal zone, the present pages is zero,
but its spanned pages is not zero.

e.g.
    Zone ranges:
      DMA      [mem 0x0000000000001000-0x0000000000ffffff]
      DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
      Normal   [mem 0x0000000100000000-0x0000007c7fffffff]
    Movable zone start for each node
      Node 1: 0x0000001080000000
      Node 2: 0x0000002080000000
      Node 3: 0x0000003080000000
      Node 4: 0x0000003c80000000
      Node 5: 0x0000004c80000000
      Node 6: 0x0000005c80000000
    Early memory node ranges
      node   0: [mem 0x0000000000001000-0x000000000009ffff]
      node   0: [mem 0x0000000000100000-0x000000007552afff]
      node   0: [mem 0x000000007bd46000-0x000000007bd46fff]
      node   0: [mem 0x000000007bdcd000-0x000000007bffffff]
      node   0: [mem 0x0000000100000000-0x000000107fffffff]
      node   1: [mem 0x0000001080000000-0x000000207fffffff]
      node   2: [mem 0x0000002080000000-0x000000307fffffff]
      node   3: [mem 0x0000003080000000-0x0000003c7fffffff]
      node   4: [mem 0x0000003c80000000-0x0000004c7fffffff]
      node   5: [mem 0x0000004c80000000-0x0000005c7fffffff]
      node   6: [mem 0x0000005c80000000-0x0000006c7fffffff]
      node   7: [mem 0x0000006c80000000-0x0000007c7fffffff]

  node1:
    Normal, start=0x1080000, present=0x0, spanned=0x1000000
    Movable, start=0x1080000, present=0x1000000, spanned=0x1000000
    pgdat, start=0x1080000, present=0x1000000, spanned=0x2000000

After this patch, the problem is fixed.

  node1:
    Normal, start=0x0, present=0x0, spanned=0x0
    Movable, start=0x1080000, present=0x1000000, spanned=0x1000000
    pgdat, start=0x1080000, present=0x1000000, spanned=0x1000000

Link: http://lkml.kernel.org/r/57A325E8.6070100@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, vmscan: make compaction_ready() more accurate and readable
Vlastimil Babka [Fri, 7 Oct 2016 23:58:03 +0000 (16:58 -0700)]
mm, vmscan: make compaction_ready() more accurate and readable

The compaction_ready() is used during direct reclaim for costly order
allocations to skip reclaim for zones where compaction should be
attempted instead.  It's combining the standard compaction_suitable()
check with its own watermark check based on high watermark with extra
gap, and the result is confusing at best.

This patch attempts to better structure and document the checks
involved.  First, compaction_suitable() can determine that the
allocation should either succeed already, or that compaction doesn't
have enough free pages to proceed.  The third possibility is that
compaction has enough free pages, but we still decide to reclaim first -
unless we are already above the high watermark with gap.  This does not
mean that the reclaim will actually reach this watermark during single
attempt, this is rather an over-reclaim protection.  So document the
code as such.  The check for compaction_deferred() is removed
completely, as it in fact had no proper role here.

The result after this patch is mainly a less confusing code.  We also
skip some over-reclaim in cases where the allocation should already
succed.

Link: http://lkml.kernel.org/r/20160810091226.6709-12-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: require only min watermarks for non-costly orders
Vlastimil Babka [Fri, 7 Oct 2016 23:58:00 +0000 (16:58 -0700)]
mm, compaction: require only min watermarks for non-costly orders

The __compaction_suitable() function checks the low watermark plus a
compact_gap() gap to decide if there's enough free memory to perform
compaction.  Then __isolate_free_page uses low watermark check to decide
if particular free page can be isolated.  In the latter case, using low
watermark is needlessly pessimistic, as the free page isolations are
only temporary.  For __compaction_suitable() the higher watermark makes
sense for high-order allocations where more freepages increase the
chance of success, and we can typically fail with some order-0 fallback
when the system is struggling to reach that watermark.  But for
low-order allocation, forming the page should not be that hard.  So
using low watermark here might just prevent compaction from even trying,
and eventually lead to OOM killer even if we are above min watermarks.

So after this patch, we use min watermark for non-costly orders in
__compaction_suitable(), and for all orders in __isolate_free_page().

[vbabka@suse.cz: clarify __isolate_free_page() comment]
Link: http://lkml.kernel.org/r/7ae4baec-4eca-e70b-2a69-94bea4fb19fa@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-11-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: use proper alloc_flags in __compaction_suitable()
Vlastimil Babka [Fri, 7 Oct 2016 23:57:57 +0000 (16:57 -0700)]
mm, compaction: use proper alloc_flags in __compaction_suitable()

The __compaction_suitable() function checks the low watermark plus a
compact_gap() gap to decide if there's enough free memory to perform
compaction.  This check uses direct compactor's alloc_flags, but that's
wrong, since these flags are not applicable for freepage isolation.

For example, alloc_flags may indicate access to memory reserves, making
compaction proceed, and then fail watermark check during the isolation.

A similar problem exists for ALLOC_CMA, which may be part of
alloc_flags, but not during freepage isolation.  In this case however it
makes sense to use ALLOC_CMA both in __compaction_suitable() and
__isolate_free_page(), since there's actually nothing preventing the
freepage scanner to isolate from CMA pageblocks, with the assumption
that a page that could be migrated once by compaction can be migrated
also later by CMA allocation.  Thus we should count pages in CMA
pageblocks when considering compaction suitability and when isolating
freepages.

To sum up, this patch should remove some false positives from
__compaction_suitable(), and allow compaction to proceed when free pages
required for compaction reside in the CMA pageblocks.

Link: http://lkml.kernel.org/r/20160810091226.6709-10-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: create compact_gap wrapper
Vlastimil Babka [Fri, 7 Oct 2016 23:57:53 +0000 (16:57 -0700)]
mm, compaction: create compact_gap wrapper

Compaction uses a watermark gap of (2UL << order) pages at various
places and it's not immediately obvious why.  Abstract it through a
compact_gap() wrapper to create a single place with a thorough
explanation.

[vbabka@suse.cz: clarify the comment of compact_gap()]
Link: http://lkml.kernel.org/r/7b6aed1f-fdf8-2063-9ff4-bbe4de712d37@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-9-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: use correct watermark when checking compaction success
Vlastimil Babka [Fri, 7 Oct 2016 23:57:50 +0000 (16:57 -0700)]
mm, compaction: use correct watermark when checking compaction success

The __compact_finished() function uses low watermark in a check that has
to pass if the direct compaction is to finish and allocation should
succeed.  This is too pessimistic, as the allocation will typically use
min watermark.  It may happen that during compaction, we drop below the
low watermark (due to parallel activity), but still form the target
high-order page.  By checking against low watermark, we might needlessly
continue compaction.

Similarly, __compaction_suitable() uses low watermark in a check whether
allocation can succeed without compaction.  Again, this is unnecessarily
pessimistic.

After this patch, these check will use direct compactor's alloc_flags to
determine the watermark, which is effectively the min watermark.

Link: http://lkml.kernel.org/r/20160810091226.6709-8-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: add the ultimate direct compaction priority
Vlastimil Babka [Fri, 7 Oct 2016 23:57:47 +0000 (16:57 -0700)]
mm, compaction: add the ultimate direct compaction priority

During reclaim/compaction loop, it's desirable to get a final answer
from unsuccessful compaction so we can either fail the allocation or
invoke the OOM killer.  However, heuristics such as deferred compaction
or pageblock skip bits can cause compaction to skip parts or whole zones
and lead to premature OOM's, failures or excessive reclaim/compaction
retries.

To remedy this, we introduce a new direct compaction priority called
COMPACT_PRIO_SYNC_FULL, which instructs direct compaction to:

 - ignore deferred compaction status for a zone
 - ignore pageblock skip hints
 - ignore cached scanner positions and scan the whole zone

The new priority should get eventually picked up by
should_compact_retry() and this should improve success rates for costly
allocations using __GFP_REPEAT, such as hugetlbfs allocations, and
reduce some corner-case OOM's for non-costly allocations.

Link: http://lkml.kernel.org/r/20160810091226.6709-6-vbabka@suse.cz
[vbabka@suse.cz: use the MIN_COMPACT_PRIORITY alias]
Link: http://lkml.kernel.org/r/d443b884-87e7-1c93-8684-3a3a35759fb1@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: don't recheck watermarks after COMPACT_SUCCESS
Vlastimil Babka [Fri, 7 Oct 2016 23:57:44 +0000 (16:57 -0700)]
mm, compaction: don't recheck watermarks after COMPACT_SUCCESS

Joonsoo has reminded me that in a later patch changing watermark checks
throughout compaction I forgot to update checks in
try_to_compact_pages() and compactd_do_work().  Closer inspection
however shows that they are redundant now in the success case, because
compact_zone() now reliably reports this with COMPACT_SUCCESS.  So
effectively the checks just repeat (a subset) of checks that have just
passed.  So instead of checking watermarks again, just test the return
value.

Note it's also possible that compaction would declare failure e.g.
because its find_suitable_fallback() is more strict than simple
watermark check, and then the watermark check we are removing would then
still succeed.  After this patch this is not possible and it's arguably
better, because for long-term fragmentation avoidance we should rather
try a different zone than allocate with the unsuitable fallback.  If
compaction of all zones fail and the allocation is important enough, it
will retry and succeed anyway.

Also remove the stray "bool success" variable from kcompactd_do_work().

Link: http://lkml.kernel.org/r/20160810091226.6709-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: rename COMPACT_PARTIAL to COMPACT_SUCCESS
Vlastimil Babka [Fri, 7 Oct 2016 23:57:41 +0000 (16:57 -0700)]
mm, compaction: rename COMPACT_PARTIAL to COMPACT_SUCCESS

COMPACT_PARTIAL has historically meant that compaction returned after
doing some work without fully compacting a zone.  It however didn't
distinguish if compaction terminated because it succeeded in creating
the requested high-order page.  This has changed recently and now we
only return COMPACT_PARTIAL when compaction thinks it succeeded, or the
high-order watermark check in compaction_suitable() passes and no
compaction needs to be done.

So at this point we can make the return value clearer by renaming it to
COMPACT_SUCCESS.  The next patch will remove some redundant tests for
success where compaction just returned COMPACT_SUCCESS.

Link: http://lkml.kernel.org/r/20160810091226.6709-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: cleanup unused functions
Vlastimil Babka [Fri, 7 Oct 2016 23:57:38 +0000 (16:57 -0700)]
mm, compaction: cleanup unused functions

Since kswapd compaction moved to kcompactd, compact_pgdat() is not
called anymore, so we remove it.  The only caller of __compact_pgdat()
is compact_node(), so we merge them and remove code that was only
reachable from kswapd.

Link: http://lkml.kernel.org/r/20160810091226.6709-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, compaction: make whole_zone flag ignore cached scanner positions
Vlastimil Babka [Fri, 7 Oct 2016 23:57:35 +0000 (16:57 -0700)]
mm, compaction: make whole_zone flag ignore cached scanner positions

Patch series "make direct compaction more deterministic")

This is mostly a followup to Michal's oom detection rework, which
highlighted the need for direct compaction to provide better feedback in
reclaim/compaction loop, so that it can reliably recognize when
compaction cannot make further progress, and allocation should invoke
OOM killer or fail.  We've discussed this at LSF/MM [1] where I proposed
expanding the async/sync migration mode used in compaction to more
general "priorities".  This patchset adds one new priority that just
overrides all the heuristics and makes compaction fully scan all zones.
I don't currently think that we need more fine-grained priorities, but
we'll see.  Other than that there's some smaller fixes and cleanups,
mainly related to the THP-specific hacks.

I've tested this with stress-highalloc in GFP_KERNEL order-4 and
THP-like order-9 scenarios.  There's some improvement for compaction
stats for the order-4, which is likely due to the better watermarks
handling.  In the previous version I reported mostly noise wrt
compaction stats, and decreased direct reclaim - now the reclaim is
without difference.  I believe this is due to the less aggressive
compaction priority increase in patch 6.

"before" is a mmotm tree prior to 4.7 release plus the first part of the
series that was sent and merged separately

                                    before        after
order-4:

Compaction stalls                    27216       30759
Compaction success                   19598       25475
Compaction failures                   7617        5283
Page migrate success                370510      464919
Page migrate failure                 25712       27987
Compaction pages isolated           849601     1041581
Compaction migrate scanned       143146541   101084990
Compaction free scanned          208355124   144863510
Compaction cost                       1403        1210

order-9:

Compaction stalls                     7311        7401
Compaction success                    1634        1683
Compaction failures                   5677        5718
Page migrate success                194657      183988
Page migrate failure                  4753        4170
Compaction pages isolated           498790      456130
Compaction migrate scanned          565371      524174
Compaction free scanned            4230296     4250744
Compaction cost                        215         203

[1] https://lwn.net/Articles/684611/

This patch (of 11):

A recent patch has added whole_zone flag that compaction sets when
scanning starts from the zone boundary, in order to report that zone has
been fully scanned in one attempt.  For allocations that want to try
really hard or cannot fail, we will want to introduce a mode where
scanning whole zone is guaranteed regardless of the cached positions.

This patch reuses the whole_zone flag in a way that if it's already
passed true to compaction, the cached scanner positions are ignored.
Employing this flag during reclaim/compaction loop will be done in the
next patch.  This patch however converts compaction invoked from
userspace via procfs to use this flag.  Before this patch, the cached
positions were first reset to zone boundaries and then read back from
struct zone, so there was a window where a parallel compaction could
replace the reset values, making the manual compaction less effective.
Using the flag instead of performing reset is more robust.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160810091226.6709-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/oom_kill.c: fix task_will_free_mem() comment
Michal Hocko [Fri, 7 Oct 2016 23:57:32 +0000 (16:57 -0700)]
mm/oom_kill.c: fix task_will_free_mem() comment

Attempt to demystify the task_will_free_mem() loop.

Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: memcontrol: add sanity checks for memcg->id.ref on get/put
Vladimir Davydov [Fri, 7 Oct 2016 23:57:29 +0000 (16:57 -0700)]
mm: memcontrol: add sanity checks for memcg->id.ref on get/put

Link: http://lkml.kernel.org/r/1c5ddb1c171dbdfc3262252769d6138a29b35b70.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/vmalloc.c: fix align value calculation error
zijun_hu [Fri, 7 Oct 2016 23:57:26 +0000 (16:57 -0700)]
mm/vmalloc.c: fix align value calculation error

It causes double align requirement for __get_vm_area_node() if parameter
size is power of 2 and VM_IOREMAP is set in parameter flags, for example
size=0x10000 -> fls_long(0x10000)=17 -> align=0x20000

get_count_order_long() is implemented and can be used instead of
fls_long() for fixing the bug, for example size=0x10000 ->
get_count_order_long(0x10000)=16 -> align=0x10000

[akpm@linux-foundation.org: s/get_order_long()/get_count_order_long()/]
[zijun_hu@zoho.com: fixes]
Link: http://lkml.kernel.org/r/57AABC8B.1040409@zoho.com
[akpm@linux-foundation.org: locate get_count_order_long() next to get_count_order()]
[akpm@linux-foundation.org: move get_count_order[_long] definitions to pick up fls_long()]
[zijun_hu@htc.com: move out get_count_order[_long]() from __KERNEL__ scope]
Link: http://lkml.kernel.org/r/57B2C4CE.80303@zoho.com
Link: http://lkml.kernel.org/r/fc045ecf-20fa-0722-b3ac-9a6140488fad@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: oom: deduplicate victim selection code for memcg and global oom
Vladimir Davydov [Fri, 7 Oct 2016 23:57:23 +0000 (16:57 -0700)]
mm: oom: deduplicate victim selection code for memcg and global oom

When selecting an oom victim, we use the same heuristic for both memory
cgroup and global oom.  The only difference is the scope of tasks to
select the victim from.  So we could just export an iterator over all
memcg tasks and keep all oom related logic in oom_kill.c, but instead we
duplicate pieces of it in memcontrol.c reusing some initially private
functions of oom_kill.c in order to not duplicate all of it.  That looks
ugly and error prone, because any modification of select_bad_process
should also be propagated to mem_cgroup_out_of_memory.

Let's rework this as follows: keep all oom heuristic related code private
to oom_kill.c and make oom_kill.c use exported memcg functions when it's
really necessary (like in case of iterating over memcg tasks).

Link: http://lkml.kernel.org/r/1470056933-7505-1-git-send-email-vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoocfs2: fix undefined struct variable in inode.h
Joseph Qi [Fri, 7 Oct 2016 23:57:20 +0000 (16:57 -0700)]
ocfs2: fix undefined struct variable in inode.h

The extern struct variable ocfs2_inode_cache is not defined. It meant to
use ocfs2_inode_cachep defined in super.c, I think. Fortunately it is
not used anywhere now, so no impact actually. Clean it up to fix this
mistake.

Link: http://lkml.kernel.org/r/57E1E49D.8050503@huawei.com
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Eric Ren <zren@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/ocfs2/dlm: remove deprecated create_singlethread_workqueue()
Bhaktipriya Shridhar [Fri, 7 Oct 2016 23:57:17 +0000 (16:57 -0700)]
fs/ocfs2/dlm: remove deprecated create_singlethread_workqueue()

The workqueue "dlm_worker" queues a single work item &dlm->dispatched_work
and thus it doesn't require execution ordering.  Hence, alloc_workqueue
has been used to replace the deprecated create_singlethread_workqueue
instance.

The WQ_MEM_RECLAIM flag has been set to ensure forward progress under
memory pressure.

Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.

Link: http://lkml.kernel.org/r/2b5ad8d6688effe1a9ddb2bc2082d26fbbe00302.1472590094.git.bhaktipriya96@gmail.com
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/ocfs2/super: remove deprecated create_singlethread_workqueue()
Bhaktipriya Shridhar [Fri, 7 Oct 2016 23:57:13 +0000 (16:57 -0700)]
fs/ocfs2/super: remove deprecated create_singlethread_workqueue()

The workqueue "ocfs2_wq" queues multiple work items viz
&osb->la_enable_wq, &journal->j_recovery_work, &os->os_orphan_scan_work,
&osb->osb_truncate_log_wq which require strict execution ordering.  Hence,
an ordered dedicated workqueue has been used.

WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure because the workqueue is being used on a memory reclaim path.

Link: http://lkml.kernel.org/r/66279de510a7f4cfc6e386d99b7e04b3f65fb11b.1472590094.git.bhaktipriya96@gmail.com
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/ocfs2/cluster: remove deprecated create_singlethread_workqueue()
Bhaktipriya Shridhar [Fri, 7 Oct 2016 23:57:10 +0000 (16:57 -0700)]
fs/ocfs2/cluster: remove deprecated create_singlethread_workqueue()

The workqueue "o2net_wq" queues multiple work items viz
&old_sc->sc_shutdown_work, &sc->sc_rx_work, &sc->sc_connect_work which
require strict execution ordering.  Hence, an ordered dedicated
workqueue has been used.

WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure.

Link: http://lkml.kernel.org/r/ddc12e5766c79ba26f8a00d98049107f8a1d4866.1472590094.git.bhaktipriya96@gmail.com
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/ocfs2/dlmfs: remove deprecated create_singlethread_workqueue()
Bhaktipriya Shridhar [Fri, 7 Oct 2016 23:57:07 +0000 (16:57 -0700)]
fs/ocfs2/dlmfs: remove deprecated create_singlethread_workqueue()

The workqueue "user_dlm_worker" queues a single work item
&lockres->l_work per user_lock_res instance and so it doesn't require
execution ordering.  Hence, alloc_workqueue has been used to replace the
deprecated create_singlethread_workqueue instance.

The WQ_MEM_RECLAIM flag has been set to ensure forward progress under
memory pressure.

Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.

Link: http://lkml.kernel.org/r/9748136d3a3b18138ad1d6ba708367aa1fe9f98c.1472590094.git.bhaktipriya96@gmail.com
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agojiffies: add time comparison functions for 64 bit jiffies
Jason A. Donenfeld [Fri, 7 Oct 2016 23:57:04 +0000 (16:57 -0700)]
jiffies: add time comparison functions for 64 bit jiffies

Though the time_before and time_after family of functions were nicely
extended to support jiffies64, so that the interface would be consistent,
it was forgotten to also extend the before/after jiffies functions to
support jiffies64.  This commit brings the interface to parity between
jiffies and jiffies64, which is quite convenient.

Link: http://lkml.kernel.org/r/20160929033319.12188-1-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofsnotify: clean up spinlock assertions
Jan Kara [Fri, 7 Oct 2016 23:57:01 +0000 (16:57 -0700)]
fsnotify: clean up spinlock assertions

Use assert_spin_locked() macro instead of hand-made BUG_ON statements.

Link: http://lkml.kernel.org/r/1474537439-18919-1-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofanotify: fix possible false warning when freeing events
Jan Kara [Fri, 7 Oct 2016 23:56:58 +0000 (16:56 -0700)]
fanotify: fix possible false warning when freeing events

When freeing permission events by fsnotify_destroy_event(), the warning
WARN_ON(!list_empty(&event->list)); may falsely hit.

This is because although fanotify_get_response() saw event->response
set, there is nothing to make sure the current CPU also sees the removal
of the event from the list.  Add proper locking around the WARN_ON() to
avoid the false warning.

Link: http://lkml.kernel.org/r/1473797711-14111-7-git-send-email-jack@suse.cz
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofanotify: use notification_lock instead of access_lock
Jan Kara [Fri, 7 Oct 2016 23:56:55 +0000 (16:56 -0700)]
fanotify: use notification_lock instead of access_lock

Fanotify code has its own lock (access_lock) to protect a list of events
waiting for a response from userspace.

However this is somewhat awkward as the same list_head in the event is
protected by notification_lock if it is part of the notification queue
and by access_lock if it is part of the fanotify private queue which
makes it difficult for any reliable checks in the generic code.  So make
fanotify use the same lock - notification_lock - for protecting its
private event list.

Link: http://lkml.kernel.org/r/1473797711-14111-6-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofsnotify: convert notification_mutex to a spinlock
Jan Kara [Fri, 7 Oct 2016 23:56:52 +0000 (16:56 -0700)]
fsnotify: convert notification_mutex to a spinlock

notification_mutex is used to protect the list of pending events.  As such
there's no reason to use a sleeping lock for it.  Convert it to a
spinlock.

[jack@suse.cz: fixed version]
Link: http://lkml.kernel.org/r/1474031567-1831-1-git-send-email-jack@suse.cz
Link: http://lkml.kernel.org/r/1473797711-14111-5-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofsnotify: drop notification_mutex before destroying event
Jan Kara [Fri, 7 Oct 2016 23:56:49 +0000 (16:56 -0700)]
fsnotify: drop notification_mutex before destroying event

fsnotify_flush_notify() and fanotify_release() destroy notification
event while holding notification_mutex.

The destruction of fanotify event includes a path_put() call which may
end up calling into a filesystem to delete an inode if we happen to be
the last holders of dentry reference which happens to be the last holder
of inode reference.

That in turn may violate lock ordering for some filesystems since
notification_mutex is also acquired e. g. during write when generating
fanotify event.

Also this is the only thing that forces notification_mutex to be a
sleeping lock.  So drop notification_mutex before destroying a
notification event.

Link: http://lkml.kernel.org/r/1473797711-14111-4-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Linus Torvalds [Fri, 7 Oct 2016 21:12:21 +0000 (14:12 -0700)]
Merge branch 'i2c/for-4.9' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Here is the 4.9 pull request from I2C including:

   - centralized error messages when registering to the core
   - improved lockdep annotations to prevent false positives
   - DT support for muxes, gates, and arbitrators
   - bus speeds can now be obtained from ACPI
   - i2c-octeon got refactored and now supports ThunderX SoCs, too
   - i2c-tegra and i2c-designware got a bigger bunch of updates
   - a couple of standard driver fixes and improvements"

* 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits)
  i2c: axxia: disable clks in case of failure in probe
  i2c: octeon: thunderx: Limit register access retries
  i2c: uniphier-f: fix misdetection of incomplete STOP condition
  gpio: pca953x: variable 'id' was used twice
  i2c: i801: Add support for Kaby Lake PCH-H
  gpio: pca953x: fix an incorrect lockdep warning
  i2c: add a warning to i2c_adapter_depth()
  lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible
  i2c: export i2c_adapter_depth()
  i2c: rk3x: Fix variable 'min_total_ns' unused warning
  i2c: rk3x: Fix sparse warning
  i2c / ACPI: Do not touch an I2C device if it belongs to another adapter
  i2c: octeon: Fix high-level controller status check
  i2c: octeon: Avoid sending STOP during recovery
  i2c: octeon: Fix set SCL recovery function
  i2c: rcar: add support for r8a7796 (R-Car M3-W)
  i2c: imx: make bus recovery through pinctrl optional
  i2c: meson: add gxbb compatible string
  i2c: uniphier-f: set the adapter to master mode when probing
  i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path
  ...

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Linus Torvalds [Fri, 7 Oct 2016 19:24:08 +0000 (12:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial

Pull trivial updates from Jiri Kosina:
 "The usual rocket science from the trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  tracing/syscalls: fix multiline in error message text
  lib/Kconfig.debug: fix DEBUG_SECTION_MISMATCH description
  doc: vfs: fix fadvise() sycall name
  x86/entry: spell EBX register correctly in documentation
  securityfs: fix securityfs_create_dir comment
  irq: Fix typo in tracepoint.xml

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livep...
Linus Torvalds [Fri, 7 Oct 2016 19:02:24 +0000 (12:02 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching

Pull livepatching updates from Jiri Kosina:

 - fix for patching modules that contain .altinstructions or
   .parainstructions sections, from Jessica Yu

 - make TAINT_LIVEPATCH a per-module flag (so that it's immediately
   clear which module caused the taint), from Josh Poimboeuf

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch/module: make TAINT_LIVEPATCH module-specific
  Documentation: livepatch: add section about arch-specific code
  livepatch/x86: apply alternatives and paravirt patches after relocations
  livepatch: use arch_klp_init_object_loaded() to finish arch-specific tasks

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Fri, 7 Oct 2016 18:58:38 +0000 (11:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:

 - Integrated Sensor Hub support (Cherrytrail+) from Srinivas Pandruvada

 - Big cleanup of Wacom driver; namely it's now using devres, and the
   standardized LED API so that libinput doesn't need to have root
   access any more, with substantial amount of other cleanups
   piggy-backing on top. All this from Benjamin Tissoires

 - Report descriptor parsing would now ignore and out-of-range System
   controls in case of the application actually being System Control.
   This fixes quite some issues with several devices, and allows us to
   remove a few ->report_fixup callbacks. From Benjamin Tissoires

 - ... a lot of other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (76 commits)
  HID: add missing \n to end of dev_warn messages
  HID: alps: fix multitouch cursor issue
  HID: hid-logitech: Documentation updates/corrections
  HID: hid-logitech: Improve Wingman Formula Force GP support
  HID: hid-logitech: Rewrite of descriptor for all DF wheels
  HID: hid-logitech: Compute combined pedals value
  HID: hid-logitech: Add combined pedal support Logitech wheels
  HID: hid-logitech: Introduce control for combined pedals feature
  HID: sony: Update copyright and add Dualshock 4 rate control note
  HID: sony: Defer the initial USB Sixaxis output report
  HID: sony: Relax duplicate checking for USB-only devices
  Revert "HID: microsoft: fix invalid rdesc for 3k kbd"
  HID: alps: fix error return code in alps_input_configured()
  HID: alps: fix stick device not working after resume
  HID: support for keyboard - Corsair STRAFE
  HID: alps: Fix memory leak
  HID: uclogic: Add support for UC-Logic TWHA60 v3
  HID: uclogic: Override constant descriptors
  HID: uclogic: Support UGTizer GP0610 partially
  HID: uclogic: Add support for several more tablets
  ...

8 years agoMerge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Linus Torvalds [Fri, 7 Oct 2016 18:46:37 +0000 (11:46 -0700)]
Merge tag 'pci-v4.9-changes' of git://git./linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Summary of PCI changes for the v4.9 merge window:

  Enumeration:
   - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)

  Resource management:
   - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
   - Ignore requested alignment for VF BARs (Yongji Xie)

  PCI device hotplug:
   - Make core explicitly non-modular (Paul Gortmaker)

  PCIe native device hotplug:
   - Rename pcie_isr() locals for clarity (Bjorn Helgaas)
   - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
   - Remove unnecessary guard (Bjorn Helgaas)
   - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
   - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
   - Clear attention LED on device add (Keith Busch)
   - Allow exclusive userspace control of indicators (Keith Busch)
   - Process all hotplug events before looking for new ones (Mayurkumar Patel)
   - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
   - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
   - Make explicitly non-modular (Paul Gortmaker)

  Power management:
   - Afford direct-complete to devices with non-standard PM (Lukas Wunner)
   - Query platform firmware for device power state (Lukas Wunner)
   - Recognize D3cold in pci_update_current_state() (Lukas Wunner)
   - Avoid unnecessary resume after direct-complete (Lukas Wunner)
   - Make explicitly non-modular (Paul Gortmaker)

  Virtualization:
   - Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
   - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)

  MSI:
   - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)

  AER:
   - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
   - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
   - Fix aer_probe() kernel-doc comment (Cao jin)
   - Add bus flag to skip source ID matching (Jon Derrick)
   - Avoid memory allocation in interrupt handling path (Jon Derrick)
   - Cache capability position (Keith Busch)
   - Make explicitly non-modular (Paul Gortmaker)
   - Remove duplicate AER severity translation (Tyler Baicar)
   - Send correct severity to calculate AER severity (Tyler Baicar)

  Precision Time Measurement:
   - Add Precision Time Measurement (PTM) support (Jonathan Yong)
   - Add PTM clock granularity information (Bjorn Helgaas)
   - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)

  Generic host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)

  Altera host bridge driver:
   - Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
   - Poll for link training status after retraining the link (Ley Foon Tan)
   - Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
   - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
   - Make MSI explicitly non-modular (Paul Gortmaker)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  ARM Versatile host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)

  Axis ARTPEC-6 host bridge driver:
   - Drop __init from artpec6_add_pcie_port() (Niklas Cassel)

  Freescale i.MX6 host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Intel VMD host bridge driver:
   - Add quirk for AER to ignore source ID (Jon Derrick)
   - Allocate IRQ lists with correct MSI-X count (Jon Derrick)
   - Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
   - Eliminate vmd_vector member from list type (Jon Derrick)
   - Eliminate index member from IRQ list (Jon Derrick)
   - Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
   - Request userspace control of PCIe hotplug indicators (Keith Busch)
   - Move VMD driver to drivers/pci/host (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)

  Microsoft Hyper-V host bridge driver:
   - Use zero-length array in struct pci_packet (Dexuan Cui)
   - Use pci_function_description[0] in struct definitions (Dexuan Cui)
   - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
   - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
   - Handle hv_pci_generic_compl() error case (Dexuan Cui)
   - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)

  NVIDIA Tegra host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant _data suffix (Thierry Reding)
   - Use of_device_get_match_data() (Thierry Reding)

  Qualcomm host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Renesas R-Car host bridge driver:
   - Consolidate register space lookup and ioremap (Bjorn Helgaas)
   - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
   - Add multi-MSI support (Grigory Kletsko)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Fix some checkpatch warnings (Sergei Shtylyov)
   - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)

  Rockchip host bridge driver:
   - Add DT bindings for Rockchip PCIe controller (Shawn Lin)
   - Add Rockchip PCIe controller support (Shawn Lin)
   - Improve the deassert sequence of four reset pins (Shawn Lin)
   - Fix wrong transmitted FTS count (Shawn Lin)
   - Increase the Max Credit update interval (Rajat Jain)

  Samsung Exynos host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Synopsys DesignWare host bridge driver:
   - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
   - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
   - Check LTSSM training bit before deciding link is up (Jisheng Zhang)
   - Move link wait definitions to .c file (Joao Pinto)
   - Wait for iATU enable (Joao Pinto)
   - Add iATU Unroll feature (Joao Pinto)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)
   - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
   - Remove redundant platform_get_resource() return value check (Wei Yongjun)

  TI DRA7xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  TI Keystone host bridge driver:
   - Propagate request_irq() failure (Wei Yongjun)

  Xilinx AXI host bridge driver:
   - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
   - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
   - Clear correct MSI set bit (Bharat Kumar Gogada)
   - Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  Xilinx NWL host bridge driver:
   - Expand error logging (Bharat Kumar Gogada)
   - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)

  Miscellaneous:
   - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
   - portdrv: Make explicitly non-modular (Paul Gortmaker)
   - Make DPC explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits)
  x86/PCI: VMD: Move VMD driver to drivers/pci/host
  PCI: rockchip: Fix wrong transmitted FTS count
  PCI: rockchip: Improve the deassert sequence of four reset pins
  PCI: rockchip: Increase the Max Credit update interval
  PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
  PCI/AER: Fix aer_probe() kernel-doc comment
  PCI: Ignore requested alignment for VF BARs
  PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
  PCI: Avoid unnecessary resume after direct-complete
  PCI: Recognize D3cold in pci_update_current_state()
  PCI: Query platform firmware for device power state
  PCI: Afford direct-complete to devices with non-standard PM
  PCI/AER: Cache capability position
  PCI/AER: Avoid memory allocation in interrupt handling path
  x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
  PCI: pciehp: Allow exclusive userspace control of indicators
  ACPI / APEI: Send correct severity to calculate AER severity
  PCI/AER: Remove duplicate AER severity translation
  x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
  x86/PCI: VMD: Eliminate index member from IRQ list
  ...

8 years agoMerge tag 'vfio-v4.9-rc1' of git://github.com/awilliam/linux-vfio
Linus Torvalds [Fri, 7 Oct 2016 18:31:29 +0000 (11:31 -0700)]
Merge tag 'vfio-v4.9-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:
 - comment fixes (Wei Jiangang)
 - static symbols (Baoyou Xie)
 - FLR virtualization (Alex Williamson)
 - catching INTx enabling after MSI/X teardown (Alex Williamson)
 - update to pci_alloc_irq_vectors helpers (Christoph Hellwig)

* tag 'vfio-v4.9-rc1' of git://github.com/awilliam/linux-vfio:
  vfio_pci: use pci_alloc_irq_vectors
  vfio-pci: Disable INTx after MSI/X teardown
  vfio-pci: Virtualize PCIe & AF FLR
  vfio: platform: mark symbols static where possible
  vfio/pci: Fix typos in comments

8 years agoMerge tag 'md/4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Linus Torvalds [Fri, 7 Oct 2016 16:45:43 +0000 (09:45 -0700)]
Merge tag 'md/4.9-rc1' of git://git./linux/kernel/git/shli/md

Pull MD updates from Shaohua Li:
 "This update includes:

   - new AVX512 instruction based raid6 gen/recovery algorithm

   - a couple of md-cluster related bug fixes

   - fix a potential deadlock

   - set nonrotational bit for raid array with SSD

   - set correct max_hw_sectors for raid5/6, which hopefuly can improve
     performance a little bit

   - other minor fixes"

* tag 'md/4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md: set rotational bit
  raid6/test/test.c: bug fix: Specify aligned(alignment) attributes to the char arrays
  raid5: handle register_shrinker failure
  raid5: fix to detect failure of register_shrinker
  md: fix a potential deadlock
  md/bitmap: fix wrong cleanup
  raid5: allow arbitrary max_hw_sectors
  lib/raid6: Add AVX512 optimized xor_syndrome functions
  lib/raid6/test/Makefile: Add avx512 gen_syndrome and recovery functions
  lib/raid6: Add AVX512 optimized recovery functions
  lib/raid6: Add AVX512 optimized gen_syndrome functions
  md-cluster: make resync lock also could be interruptted
  md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hang
  md-cluster: convert the completion to wait queue
  md-cluster: protect md_find_rdev_nr_rcu with rcu lock
  md-cluster: clean related infos of cluster
  md: changes for MD_STILL_CLOSED flag
  md-cluster: remove some unnecessary dlm_unlock_sync
  md-cluster: use FORCEUNLOCK in lockres_free
  md-cluster: call md_kick_rdev_from_array once ack failed

8 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Fri, 7 Oct 2016 16:28:53 +0000 (09:28 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (hpsa,
  be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
  called smartpqi for which a driver is added, there's some cleanup work
  of the ibm vscsi target and updates to libfc, plus a whole host of
  minor fixes and updates and finally the removal of several ISA drivers
  which seem not to have been used for years"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
  scsi: mvsas: Mark symbols static where possible
  scsi: pm8001: Mark symbols static where possible
  scsi: arcmsr: Simplify user_len checking
  scsi: fcoe: fix off by one in eth2fc_speed()
  scsi: dtc: remove from tree
  scsi: t128: remove from tree
  scsi: pas16: remove from tree
  scsi: u14-34f: remove from tree
  scsi: ultrastor: remove from tree
  scsi: in2000: remove from tree
  scsi: wd7000: remove from tree
  scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
  scsi: lpfc: Mark symbols static where possible
  scsi: hpsa: correct call to hpsa_do_reset
  scsi: ufs: Get a TM service response from the correct offset
  scsi: ibmvfc: Fix I/O hang when port is not mapped
  scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
  scsi: ipr: Remove redundant messages at adapter init time
  scsi: ipr: Don't log unnecessary 9084 error details
  scsi: smartpqi: raid bypass lba calculation fix
  ...

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 7 Oct 2016 16:12:19 +0000 (09:12 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "You will get

   - a new driver for Elan eKTF2127 touchscreen controllers

   - a new "gpio-decoder" driver to read and report state of several
     GPIO lines

   - an ADC resistor ladder driver

   - the ft6326 driver is removed because edt-ft5x06 handles the same
     devices just fine.

  .. plus the regular slew of driver fixes/enhancements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: elan_i2c - fix return tests of i2c_smbus_read_block_data()
  Input: ektf2127 - mark PM functions as __maybe_unused
  Input: snvs_pwrkey - drop input_free_device call if input_register_device fails
  Input: add support for Elan eKTF2127 touchscreen controller
  Input: serio - add hangup support
  Input: tps65218-pwrbutton - add support for tps65217 variant
  Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes
  Input: jornada720_kbd - remove unneeded mach/hardware.h include
  Input: focaltech - mark focaltech_set_resolution() static
  Input: wdt87xx_i2c - fix the flash erase issue
  Input: gpio-keys-polled - don't use unit-address with button nodes
  Input: add generic input driver to read encoded GPIO lines
  Input: add ADC resistor ladder driver
  Input: pegasus_notetaker - directly include workqueue header
  Input: elants_i2c - get product id on recovery mode for FW update
  Input: wm97xx - remove deprecated create_singletheread_workqueue
  Input: mc13783_ts - remove deprecated create_singletheread_workqueue
  Input: psmouse - remove deprecated create_singletheread_workqueue
  Input: jornada720_kbd - switch to using dev_dbg
  Input: jornada720_kbd - get rid of mach/irqs.h include
  ...

8 years agoMerge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Linus Torvalds [Fri, 7 Oct 2016 15:35:35 +0000 (08:35 -0700)]
Merge tag 'mfd-for-linus-4.9' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...

8 years agoMerge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', 'for-4.9/hid-input', 'for...
Jiri Kosina [Fri, 7 Oct 2016 07:59:48 +0000 (09:59 +0200)]
Merge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', 'for-4.9/hid-input', 'for-4.9/intel-ish', 'for-4.9/kye-uclogic-waltop-fixes', 'for-4.9/logitech', 'for-4.9/sony', 'for-4.9/upstream' and 'for-4.9/wacom' into for-linus

8 years agoMerge tag 'backlight-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 7 Oct 2016 01:56:53 +0000 (18:56 -0700)]
Merge tag 'backlight-for-linus-4.9' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Fix-ups:

   - Remove unused .owner assignment; tosa_bl
   - Enable GPIO sleeping; pwm_bl"

* tag 'backlight-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Handle gpio that can sleep
  backlight-tosa: Delete unnecessary assignment for the field "owner"

8 years agoMerge tag 'hsi-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Linus Torvalds [Fri, 7 Oct 2016 01:51:59 +0000 (18:51 -0700)]
Merge tag 'hsi-for-4.9' of git://git./linux/kernel/git/sre/linux-hsi

Pull HSI fix from Sebastian Reichel:
 "Fix hsi userspace header"

* tag 'hsi-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: hsi_char.h: use __u32 from linux/types.h

8 years agoMerge tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power...
Linus Torvalds [Fri, 7 Oct 2016 01:21:15 +0000 (18:21 -0700)]
Merge tag 'for-v4.9' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 - move power supply drivers to drivers/power/supply
 - unify location of power supply DT documentation
 - tps65217-charger: IRQ support
 - act8945a-charger: misc. cleanups & improvements
 - sbs-battery cleanup
 - fix users of deprecated create_singlethread_workqueue()
 - misc fixes.

* tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (46 commits)
  power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime update
  power: supply: sbs-battery: Cleanup removal of chip->pdata
  power: reset: st: Remove obsolete platforms from dt doc
  power: reset: st-poweroff: Remove obsolete platforms.
  power: reset: zx-reboot: Unmap region obtained by of_iomap
  power: reset: xgene-reboot: Unmap region obtained by of_iomap
  power: supply: ab8500: cleanup with list_first_entry_or_null()
  power: reset: add in missing white space in error message text
  sbs-battery: make writes to ManufacturerAccess optional
  power: bq24257: Fix use of uninitialized pointer bq->charger
  power: supply: sbs-battery: simplify DT parsing
  power: supply: bq24735-charger: Request status GPIO with initial input setup
  power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detect
  power: supply: act8945a_charger: Add max current property
  power: supply: act8945a_charger: Add capacity level property
  doc: bindings: power: act8945a-charger: Update properties.
  power: supply: act8945a_charger: Fix the power supply type
  power: supply: act8945a_charger: Add status change update support
  power: supply: act8945a_charger: Improve state handling
  power: supply: act8945a_charger: Remove "battery_temperature"
  ...

8 years agoMerge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu...
Linus Torvalds [Fri, 7 Oct 2016 00:36:53 +0000 (17:36 -0700)]
Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jussi Brar:
 "New driver and DT bindings for MHU controller integrated on Amlogic
  Meson platform"

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: Add Amlogic Meson MHU Bindings
  mailbox: Add Platform Message-Handling-Unit variant driver

8 years agoMerge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Fri, 7 Oct 2016 00:13:54 +0000 (17:13 -0700)]
Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This is bit large pile of code which bring in some nice additions:

   - Error reporting: we have added a new mechanism for users of
     dmaenegine to register a callback_result which tells them the
     result of the dma transaction. Right now only one user (ntb) is
     using it.

   - As we discussed on KS mailing list and pointed out NO_IRQ has no
     place in kernel, this also remove NO_IRQ from dmaengine subsystem
     (both arm and ppc users)

   - Support for IOMMU slave transfers and its implementation for arm.

   - To get better build coverage, enable COMPILE_TEST for bunch of
     driver, and fix the warning and sparse complaints on these.

   - Apart from above, usual updates spread across drivers"

* tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits)
  async_pq_val: fix DMA memory leak
  dmaengine: virt-dma: move function declarations
  dmaengine: omap-dma: Enable burst and data pack for SG
  DT: dmaengine: rcar-dmac: document R8A7743/5 support
  dmaengine: fsldma: Unmap region obtained by of_iomap
  dmaengine: jz4780: fix resource leaks on error exit return
  dma-debug: fix ia64 build, use PHYS_PFN
  dmaengine: coh901318: fix integer overflow when shifting more than 32 places
  dmaengine: edma: avoid uninitialized variable use
  dma-mapping: fix m32r build warning
  dma-mapping: fix ia64 build, use PHYS_PFN
  dmaengine: ti-dma-crossbar: enable COMPILE_TEST
  dmaengine: omap-dma: enable COMPILE_TEST
  dmaengine: edma: enable COMPILE_TEST
  dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage
  dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter
  dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs
  dmaengine: edma: Rename set_bits and remove unused clear_bits helper
  dmaengine: edma: Use correct type for of_find_property() third parameter
  dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC)
  ...

8 years agoMerge tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc
Linus Torvalds [Fri, 7 Oct 2016 00:03:49 +0000 (17:03 -0700)]
Merge tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
 "The bulk of these patches involve splitting the rpmsg implementation
  into a framework/API part and a virtio specific backend part. It then
  adds the Qualcomm Shared Memory Device (SMD) as an additional
  supported wire format.

  Also included is a set of code style cleanups that have been lingering
  for a while"

* tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
  rpmsg: smd: fix dependency on QCOM_SMD=n
  rpmsg: Introduce Qualcomm SMD backend
  rpmsg: Allow callback to return errors
  rpmsg: Move virtio specifics from public header
  rpmsg: virtio: Hide vrp pointer from the public API
  rpmsg: Hide rpmsg indirection tables
  rpmsg: Split rpmsg core and virtio backend
  rpmsg: Split off generic tail of create_channel()
  rpmsg: Move helper for finding rpmsg devices to core
  rpmsg: Move endpoint related interface to rpmsg core
  rpmsg: Indirection table for rpmsg_endpoint operations
  rpmsg: Move rpmsg_device API to new file
  rpmsg: Introduce indirection table for rpmsg_device operations
  rpmsg: Clean up rpmsg device vs channel naming
  rpmsg: Make rpmsg_create_ept() take channel_info struct
  rpmsg: rpmsg_send() operations takes rpmsg_endpoint
  rpmsg: Name rpmsg devices based on channel id
  rpmsg: Enable matching devices with drivers based on DT
  rpmsg: Drop prototypes for non-existing functions
  samples/rpmsg: add support for multiple instances
  ...

8 years agoMerge tag 'rproc-v4.9' of git://github.com/andersson/remoteproc
Linus Torvalds [Fri, 7 Oct 2016 00:00:09 +0000 (17:00 -0700)]
Merge tag 'rproc-v4.9' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "In addition to a slew of minor fixes and cleanups these patches
  refactor how we deal with remoteprocs that will be auto-booting
  themselves.

  That does clean up the remote resource handling but makes for
  additional work to clarify responsibilities and life cycles of
  resources. We also revise how module locking of remoteproc drivers
  work, so that they are locked as we hand out references to them to
  third parties, rather than only when booted by anyone.

  In addition to that we also introduce the Qualcomm Wireless Subsystem
  remoteproc driver"

* tag 'rproc-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
  remoteproc: Refactor rproc module locking
  remoteproc: Split driver and consumer dereferencing
  remoteproc: Correct resource handling upon boot failure
  remoteproc: Drop unnecessary NULL check
  remoteproc: core: transform struct fw_rsc_vdev_vring reserved field in pa
  remoteproc: Modify FW_RSC_ADDR_ANY definition
  remoteproc: qcom: wcnss: Fix return value check in wcnss_probe()
  remoteproc: qcom: Introduce WCNSS peripheral image loader
  dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding
  remoteproc: Only update table_ptr if we have a loaded table
  remoteproc: Move handling of cached table to boot/shutdown
  remoteproc: Move vdev handling to boot/shutdown
  remoteproc: Calculate max_notifyid during load
  remoteproc: Introduce auto-boot flag
  remoteproc/omap: revise a minor error trace message
  remoteproc/omap: fix various code formatting issues
  remoteproc: print hex numbers with a leading 0x format
  remoteproc: align code with open parenthesis
  remoteproc: fix bare unsigned type usage
  remoteproc: use variable names for sizeof() operator
  ...

8 years agoMerge tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk...
Linus Torvalds [Thu, 6 Oct 2016 22:30:40 +0000 (15:30 -0700)]
Merge tag 'for-f2fs-4.9' of git://git./linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've investigated how f2fs deals with errors given by
  our fault injection facility. With this, we could fix several corner
  cases. And, in order to improve the performance, we set inline_dentry
  by default and enhance the exisiting discard issue flow. In addition,
  we added f2fs_migrate_page for better memory management.

  Enhancements:
   - set inline_dentry by default
   - improve discard issue flow
   - add more fault injection cases in f2fs
   - allow block preallocation for encrypted files
   - introduce migrate_page callback function
   - avoid truncating the next direct node block at every checkpoint

  Bug fixes:
   - set page flag correctly between write_begin and write_end
   - missing error handling cases detected by fault injection
   - preallocate blocks regarding to 4KB alignement correctly
   - dentry and filename handling of encryption
   - lost xattrs of directories"

* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
  f2fs: introduce update_ckpt_flags to clean up
  f2fs: don't submit irrelevant page
  f2fs: fix to commit bio cache after flushing node pages
  f2fs: introduce get_checkpoint_version for cleanup
  f2fs: remove dead variable
  f2fs: remove redundant io plug
  f2fs: support checkpoint error injection
  f2fs: fix to recover old fault injection config in ->remount_fs
  f2fs: do fault injection initialization in default_options
  f2fs: remove redundant value definition
  f2fs: support configuring fault injection per superblock
  f2fs: adjust display format of segment bit
  f2fs: remove dirty inode pages in error path
  f2fs: do not unnecessarily null-terminate encrypted symlink data
  f2fs: handle errors during recover_orphan_inodes
  f2fs: avoid gc in cp_error case
  f2fs: should put_page for summary page
  f2fs: assign return value in f2fs_gc
  f2fs: add customized migrate_page callback
  f2fs: introduce cp_lock to protect updating of ckpt_flags
  ...

8 years agoMerge tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees...
Linus Torvalds [Thu, 6 Oct 2016 22:16:16 +0000 (15:16 -0700)]
Merge tag 'pstore-v4.9-rc1' of git://git./linux/kernel/git/kees/linux

Pull pstore updates from Kees Cook:

 - Fix bug in module unloading

 - Switch to always using spinlock over cmpxchg

 - Explicitly define pstore backend's supported modes

 - Remove bounce buffer from pmsg

 - Switch to using memcpy_to/fromio()

 - Error checking improvements

* tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ramoops: move spin_lock_init after kmalloc error checking
  pstore/ram: Use memcpy_fromio() to save old buffer
  pstore/ram: Use memcpy_toio instead of memcpy
  pstore/pmsg: drop bounce buffer
  pstore/ram: Set pstore flags dynamically
  pstore: Split pstore fragile flags
  pstore/core: drop cmpxchg based updates
  pstore/ramoops: fixup driver removal

8 years agoMerge tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubca...
Linus Torvalds [Thu, 6 Oct 2016 20:33:35 +0000 (13:33 -0700)]
Merge tag 'for-linus-4.9-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
 "Miscellaneous improvements:
   - clean up debugfs globals
   - remove dead code in sysfs
   - reorganize duplicated sysfs attribute structs
   - consolidate sysfs show and store functions
   - remove duplicated sysfs_ops structures
   - describe organization of sysfs
   - make devreq_mutex static
   - g_orangefs_stats -> orangefs_stats for consistency
   - rename most remaining global variables

  Feature negotiation:
   - enable Orangefs userspace and kernel module to negotiate mutually
     supported features"

* tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  Revert "orangefs: bump minimum userspace version"
  orangefs: bump minimum userspace version
  orangefs: rename most remaining global variables
  orangefs: g_orangefs_stats -> orangefs_stats for consistency
  orangefs: make devreq_mutex static
  orangefs: describe organization of sysfs
  orangefs: remove duplicated sysfs_ops structures
  orangefs: consolidate sysfs show and store functions
  orangefs: reorganize duplicated sysfs attribute structs
  orangefs: remove dead code in sysfs
  orangefs: clean up debugfs globals
  orangefs: do not allow client readahead cache without feature bit
  orangefs: add features op
  orangefs: record userspace version for feature compatbility
  orangefs: add readahead count and size to sysfs
  orangefs: re-add flush_racache from out-of-tree
  orangefs: turn param response value into union
  orangefs: add missing param request ops
  orangefs: rename remaining bits of mmap readahead cache

8 years agoMerge tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux...
Linus Torvalds [Thu, 6 Oct 2016 18:48:41 +0000 (11:48 -0700)]
Merge tag 'trace-v4.9' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This release cycle is rather small.  Just a few fixes to tracing.

  The big change is the addition of the hwlat tracer. It not only
  detects SMIs, but also other latency that's caused by the hardware. I
  have detected some latency from large boxes having bus contention"

* tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Call traceoff trigger after event is recorded
  ftrace/scripts: Add helper script to bisect function tracing problem functions
  tracing: Have max_latency be defined for HWLAT_TRACER as well
  tracing: Add NMI tracing in hwlat detector
  tracing: Have hwlat trace migrate across tracing_cpumask CPUs
  tracing: Add documentation for hwlat_detector tracer
  tracing: Added hardware latency tracer
  ftrace: Access ret_stack->subtime only in the function profiler
  function_graph: Handle TRACE_BPUTS in print_graph_comment
  tracing/uprobe: Drop isdigit() check in create_trace_uprobe

8 years agoMerge tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Oct 2016 18:19:10 +0000 (11:19 -0700)]
Merge tag 'for-linus-4.9-rc0-tag' of git://git./linux/kernel/git/xen/tip

Pull xen updates from David Vrabel:
 "xen features and fixes for 4.9:

   - switch to new CPU hotplug mechanism

   - support driver_override in pciback

   - require vector callback for HVM guests (the alternate mechanism via
     the platform device has been broken for ages)"

* tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/x86: Update topology map for PV VCPUs
  xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
  xen/pciback: support driver_override
  xen/pciback: avoid multiple entries in slot list
  xen/pciback: simplify pcistub device handling
  xen: Remove event channel notification through Xen PCI platform device
  xen/events: Convert to hotplug state machine
  xen/x86: Convert to hotplug state machine
  x86/xen: add missing \n at end of printk warning message
  xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc()
  xen: Make VPMU init message look less scary
  xen: rename xen_pmu_init() in sys-hypervisor.c
  hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again)
  xen/x86: Move irq allocation from Xen smp_op.cpu_up()

8 years agoMerge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 6 Oct 2016 17:49:01 +0000 (10:49 -0700)]
Merge tag 'kvm-4.9-1' of git://git./virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "All architectures:
   - move `make kvmconfig` stubs from x86
   - use 64 bits for debugfs stats

  ARM:
   - Important fixes for not using an in-kernel irqchip
   - handle SError exceptions and present them to guests if appropriate
   - proxying of GICV access at EL2 if guest mappings are unsafe
   - GICv3 on AArch32 on ARMv8
   - preparations for GICv3 save/restore, including ABI docs
   - cleanups and a bit of optimizations

  MIPS:
   - A couple of fixes in preparation for supporting MIPS EVA host
     kernels
   - MIPS SMP host & TLB invalidation fixes

  PPC:
   - Fix the bug which caused guests to falsely report lockups
   - other minor fixes
   - a small optimization

  s390:
   - Lazy enablement of runtime instrumentation
   - up to 255 CPUs for nested guests
   - rework of machine check deliver
   - cleanups and fixes

  x86:
   - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
   - Hyper-V TSC page
   - per-vcpu tsc_offset in debugfs
   - accelerated INS/OUTS in nVMX
   - cleanups and fixes"

* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
  KVM: MIPS: Drop dubious EntryHi optimisation
  KVM: MIPS: Invalidate TLB by regenerating ASIDs
  KVM: MIPS: Split kernel/user ASID regeneration
  KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
  KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
  KVM: arm64: Require in-kernel irqchip for PMU support
  KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
  KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
  KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
  KVM: PPC: BookE: Fix a sanity check
  KVM: PPC: Book3S HV: Take out virtual core piggybacking code
  KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
  ARM: gic-v3: Work around definition of gic_write_bpr1
  KVM: nVMX: Fix the NMI IDT-vectoring handling
  KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
  KVM: nVMX: Fix reload apic access page warning
  kvmconfig: add virtio-gpu to config fragment
  config: move x86 kvm_guest.config to a common location
  arm64: KVM: Remove duplicating init code for setting VMID
  ARM: KVM: Support vgic-v3
  ...