usb: xhci: Fix ASM2142/ASM3142 DMA addressing

commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream.

The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: fix the failure of bandwidth allocation

commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream.

The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.

Cc: stable <stable@vger.kernel.org>
Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: math-emu: Fix up 'cmp' insn for clang ias

[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]

The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:

arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
 cmp $0xffffffff,-24(%ebp)
 ^

Make this a 32-bit comparison, which it was clearly meant to be.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP

[ Upstream commit 5afc78551bf5d53279036e0bf63314e35631d79f ]

Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()

[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]

gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ioat setting ioat timeout as module parameter

[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ]

DMA transaction time to completion is a function of PCI bandwidth,
transaction size and a queue depth.  So hard coded value for timeouts
might be wrong for some scenarios.

Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: dev_get_regmap_match(): fix string comparison

[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ]

This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.

The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.

Fix this by using strcmp() instead.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: tegra210-adma: Fix runtime PM imbalance on error

[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: apple: Disable Fn-key key-re-mapping on clone keyboards

[ Upstream commit a5d81646fa294eed57786a9310b06ca48902adf8 ]

The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.

But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.

The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.

This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.

This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.

Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override

[ Upstream commit 43e666acb79f3d355dd89bf20f4d25d3b15da13e ]

The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.

Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/decode_stacktrace: strip basepath from all paths

[ Upstream commit d178770d8d21489abf5bafefcbb6d5243b482e9a ]

Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.

Change to remove the basepath prefix from all lines.

Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: smc91x: Fix possible memory leak in smc_drv_probe()

[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ]

If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.

Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration

[ Upstream commit 473309fb8372365ad211f425bca760af800e10a7 ]

From Documentation/networking/timestamping.txt:

  A driver which supports hardware time stamping shall update the
  struct with the actual, possibly more permissive configuration.

Do update the struct passed when we upscale the requested time
stamping mode.

Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ax88172a: fix ax88172a_unbind() failures

[ Upstream commit c28d9a285668c799eeae2f7f93e929a6028a4d6d ]

If ax88172a_unbind() fails, make sure that the return code is
less than zero so that cleanup is done properly and avoid UAF.

Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers")
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path

[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ]

The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.

Fix it and have it consistent with the corresponding call in 'rr_close()'.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix race when modifying pause settings.

[ Upstream commit 163e9ef63641a02de4c95cd921577265c52e1ce2 ]

The driver was modified to not rely on rtnl lock to protect link
settings about 2 years ago.  The pause setting was missed when
making that change.  Fix it by acquiring link_lock mutex before
calling bnxt_hwrm_set_pause().

Fixes: e2dc9b6e38fa ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix mount failure caused by race with umount

[ Upstream commit 48cfa61b58a1fee0bc49eef04f8ccf31493b7cdd ]

It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.

Here is the sequence laid out in greater detail:

CPU0                                                    CPU1
down_write sb->s_umount
btrfs_kill_super
  kill_anon_super(sb)
    generic_shutdown_super(sb);
      shrink_dcache_for_umount(sb);
      sync_filesystem(sb);
      evict_inodes(sb); // SLOW

                                              btrfs_mount_root
                                                btrfs_scan_one_device
                                                fs_devices = device->fs_devices
                                                fs_info->fs_devices = fs_devices
                                                // fs_devices-opened makes this a no-op
                                                btrfs_open_devices(fs_devices, mode, fs_type)
                                                s = sget(fs_type, test, set, flags, fs_info);
                                                  find sb in s_instances
                                                  grab_super(sb);
                                                    down_write(&s->s_umount); // blocks

      sop->put_super(sb)
        // sb->fs_devices->opened == 2; no-op
      spin_lock(&sb_lock);
      hlist_del_init(&sb->s_instances);
      spin_unlock(&sb_lock);
      up_write(&sb->s_umount);
                                                    return 0;
                                                  retry lookup
                                                  don't find sb in s_instances (deleted by CPU0)
                                                  s = alloc_super
                                                  return s;
                                                btrfs_fill_super(s, fs_devices, data)
                                                  open_ctree // fs_devices total_rw_bytes improperly set!
                                                    btrfs_read_chunk_tree
                                                      read_one_dev // increment total_rw_bytes again!!
                                                      super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!

To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.

To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.

  for i in $(seq 0 500)
  do
    dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
  done
  umount /mnt/foo&
  mount /mnt/foo

does the trick for me.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix double free on ulist after backref resolution failure

commit 580c079b5766ac706f56eec5c79aee4bf929fef6 upstream.

At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots
argument to point to it. However if later we fail due to an error returned
by find_parent_nodes(), we free that ulist but leave a dangling pointer in
the **roots argument. Upon receiving the error, a caller of this function
can attempt to free the same ulist again, resulting in an invalid memory
access.

One such scenario is during qgroup accounting:

btrfs_qgroup_account_extents()

 --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated
     pointer) to btrfs_find_all_roots()

   --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe()
       passing &new_roots to it

     --> allocates ulist and assigns its address to **roots (which
         points to new_roots from btrfs_qgroup_account_extents())

     --> find_parent_nodes() returns an error, so we free the ulist
         and leave **roots pointing to it after returning

 --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned
     an error and jumps to the label 'cleanup', which just tries to
     free again the same ulist

Stack trace example:

 ------------[ cut here ]------------
 BTRFS: tree first key check failed
 WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs]
 Modules linked in: dm_snapshot dm_thin_pool (...)
 CPU: 1 PID: 1763215 Comm: fsstress Tainted: G        W         5.8.0-rc3-btrfs-next-64 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs]
 Code: 28 5b 5d (...)
 RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff
 RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e
 R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000
 FS:  00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  read_block_for_search+0xf6/0x350 [btrfs]
  btrfs_next_old_leaf+0x242/0x650 [btrfs]
  resolve_indirect_refs+0x7cf/0x9e0 [btrfs]
  find_parent_nodes+0x4ea/0x12c0 [btrfs]
  btrfs_find_all_roots_safe+0xbf/0x130 [btrfs]
  btrfs_qgroup_account_extents+0x9d/0x390 [btrfs]
  btrfs_commit_transaction+0x4f7/0xb20 [btrfs]
  btrfs_sync_file+0x3d4/0x4d0 [btrfs]
  do_fsync+0x38/0x70
  __x64_sys_fdatasync+0x13/0x20
  do_syscall_64+0x5c/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fc47e2d72e3
 Code: Bad RIP value.
 RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3
 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003
 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8
 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0
 softirqs last  enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 ---[ end trace 8639237550317b48 ]---
 BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024)
 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
 CPU: 2 PID: 1763215 Comm: fsstress Tainted: G        W         5.8.0-rc3-btrfs-next-64 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:ulist_release+0x14/0x60 [btrfs]
 Code: c7 07 00 (...)
 RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840
 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840
 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840
 FS:  00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  ulist_free+0x13/0x20 [btrfs]
  btrfs_qgroup_account_extents+0xf3/0x390 [btrfs]
  btrfs_commit_transaction+0x4f7/0xb20 [btrfs]
  btrfs_sync_file+0x3d4/0x4d0 [btrfs]
  do_fsync+0x38/0x70
  __x64_sys_fdatasync+0x13/0x20
  do_syscall_64+0x5c/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fc47e2d72e3
 Code: Bad RIP value.
 RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3
 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003
 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8
 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50
 Modules linked in: dm_snapshot dm_thin_pool (...)
 ---[ end trace 8639237550317b49 ]---
 RIP: 0010:ulist_release+0x14/0x60 [btrfs]
 Code: c7 07 00 (...)
 RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840
 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840
 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840
 FS:  00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after
it frees the ulist.

Fixes: 8da6d5815c592b ("Btrfs: added btrfs_find_all_roots()")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5670: Correct RT5670_LDO_SEL_MASK

commit 5cacc6f5764e94fa753b2c1f5f7f1f3f74286e82 upstream.

The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage,
so the correct mask is 0x7 not 0x3.

Because of this wrong mask we were programming the ldo bits
to a setting of binary 001 (0x05 & 0x03) instead of binary 101
when moving to SND_SOC_BIAS_PREPARE.

According to the datasheet 001 is a reserved value, so no idea
what it did, since the driver was working fine before I guess we
got lucky and it does something which is ok.

Fixes: 5e8351de740d ("ASoC: add RT5670 CODEC driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: info: Drop WARN_ON() from buffer NULL sanity check

commit 60379ba08532eca861e933b389526a4dc89e0c42 upstream.

snd_info_get_line() has a sanity check of NULL buffer -- both buffer
itself being NULL and buffer->buffer being NULL.  Basically both
checks are valid and necessary, but the problem is that it's with
snd_BUG_ON() macro that triggers WARN_ON().  The latter condition
(NULL buffer->buffer) can be met arbitrarily by user since the buffer
is allocated at the first write, so it means that user can trigger
WARN_ON() at will.

This patch addresses it by simply moving buffer->buffer NULL check out
of snd_BUG_ON() so that spurious WARNING is no longer triggered.

Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression

commit fe5ed7ab99c656bd2f5b79b49df0e9ebf2cead8a upstream.

If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:

# cat test.c
void unused_func(void)
{
}
int main(void)
{
return 0;
}

# gcc -g test.c -o test
# perf probe -x ./test -a unused_func
# perf record -e probe_test:unused_func gdb ./test -ex run
GNU gdb (GDB) 10.0.50.20200714-git
...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
(gdb)

The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.

Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.

This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.

Reported-by: Aaron Merey <amerey@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")

commit 65caafd0d2145d1dd02072c4ced540624daeab40 upstream.

Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).

The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sky2: initialize return of gm_phy_read

[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ]

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
u16 v;
__gm_phy_read(hw, port, reg, &v);
return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/wan/lapbether: Fixed the value of hard_header_len

[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes,
  then this driver will prepend a length field of 2 bytes,
  then the underlying Ethernet device will prepend its own header.

So, the header length required should be:
  -1 + 3 + 2 + "the header length needed by the underlying device".

This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: update *pos in cpuinfo_op.next

[ Upstream commit 0d5ab144429e8bd80889b856a44d56ab4a5cd59b ]

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: fix __sync_fetch_and_{and,or}_4 declarations

[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]

Building xtensa kernel with gcc-10 produces the following warnings:
  arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_and_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]
  arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_or_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_transport_spi: Fix function pointer check

[ Upstream commit 5aee52c44d9170591df65fafa1cd408acc1225ce ]

clang static analysis flags several null function pointer problems.

drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reviewing the store_spi_store_max macro

if (i->f->set_##field)
return -EINVAL;

should be

if (!i->f->set_##field)
return -EINVAL;

Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: allow rx of mesh eapol frames with default rx key

[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]

Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: amd: fix npins for uart0 in kerncz_groups

[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ]

uart0_pins is defined as:
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};

which npins is wronly specified as 9 later
{
.name = "uart0",
.pins = uart0_pins,
.npins = 9,
},

npins should be 5 instead of 9 according to the definition.

Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.231

x86/cpu: Move x86_cache_bits settings

This patch is to fix the backport of the upstream patch:
cc51e5428ea5 x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+

When this was backported to the 4.9 and 4.14 stable branches the line
+       c->x86_cache_bits = c->x86_phys_bits;
was applied in the wrong place, being added to the
identify_cpu_without_cpuid() function instead of the get_cpu_cap()
function which it was correctly applied to in the 4.4 backport.

This means that x86_cache_bits is not set correctly resulting in the
following warning due to the cache bits being left uninitalised (zero).

 WARNING: CPU: 0 PID: 7566 at arch/x86/kvm/mmu.c:284 kvm_mmu_set_mmio_spte_mask+0x4e/0x60 [kvm
 Modules linked in: kvm_intel(+) kvm irqbypass ipv6 crc_ccitt binfmt_misc evdev lpc_ich mfd_core ioatdma pcc_cpufreq dca ena acpi_power_meter hwmon acpi_pad button ext4 crc16 mbcache jbd2 fscrypto nvme nvme_core dm_mirror dm_region_hash dm_log dm_mod dax
 Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
 task: ffff88ff77704c00 task.stack: ffffc9000edac000
 RIP: 0010:kvm_mmu_set_mmio_spte_mask+0x4e/0x60 [kvm
 RSP: 0018:ffffc9000edafc60 EFLAGS: 00010206
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffff45
 RDX: 000000000000002e RSI: 0008000000000001 RDI: 0008000000000001
 RBP: ffffffffa036f000 R08: ffffffffffffff80 R09: ffffe8ffffccb3c0
 R10: 0000000000000038 R11: 0000000000000000 R12: 0000000000005b80
 R13: ffffffffa0370e40 R14: 0000000000000001 R15: ffff88bf7c0927e0
 FS:  00007fa316f24740(0000) GS:ffff88bf7f600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fa316ea0000 CR3: 0000003f7e986004 CR4: 00000000003606f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  kvm_mmu_module_init+0x166/0x230 [kvm
  kvm_arch_init+0x5d/0x150 [kvm
  kvm_init+0x1c/0x2d0 [kvm
  ? hardware_setup+0x4a6/0x4a6 [kvm_intel
  vmx_init+0x23/0x6aa [kvm_intel
  ? hardware_setup+0x4a6/0x4a6 [kvm_intel
  do_one_initcall+0x3e/0x15d
  do_init_module+0x5b/0x1e5
  load_module+0x19e6/0x1dc0
  ? SYSC_init_module+0x13b/0x170
  SYSC_init_module+0x13b/0x170
  do_syscall_64+0x67/0x110
  entry_SYSCALL_64_after_hwframe+0x41/0xa6
 RIP: 0033:0x7fa316828f3a
 RSP: 002b:00007ffc9d65c1f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
 RAX: ffffffffffffffda RBX: 00007fa316b08849 RCX: 00007fa316828f3a
 RDX: 00007fa316b08849 RSI: 0000000000071328 RDI: 00007fa316e37000
 RBP: 0000000000b47e80 R08: 0000000000000003 R09: 0000000000000000
 R10: 00007fa316822dba R11: 0000000000000246 R12: 0000000000b46340
 R13: 0000000000b464c0 R14: 0000000000000000 R15: 0000000000040000
 Code: e9 65 06 00 75 25 48 b8 00 00 00 00 00 00 00 40 48 09 c6 48 09 c7 48 89 35 f8 65 06 00 48 89 3d f9 65 06 00 c3 0f 0b 0f 0b eb d2 <0f> 0b eb d7 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44

Fixes: 4.9.x  ef3d45c95764 x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
Fixes: 4.14.x ec4034835eaf x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
Cc: stable@vger.kernel.org # 4.9.x-4.14.x
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic: Atomically update affinity

commit 005c34ae4b44f085120d7f371121ec7ded677761 upstream.

The GIC driver uses a RMW sequence to update the affinity, and
relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences
to update it atomically.

But these sequences only expand into anything meaningful if
the BL_SWITCHER option is selected, which almost never happens.

It also turns out that using a RMW and locks is just as silly,
as the GIC distributor supports byte accesses for the GICD_TARGETRn
registers, which when used make the update atomic by definition.

Drop the terminally broken code and replace it by a byte write.

Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: handle case of task_h_load() returning 0

commit 01cfcde9c26d8555f0e6e9aea9d6049f87683998 upstream.

task_h_load() can return 0 in some situations like running stress-ng
mmapfork, which forks thousands of threads, in a sched group on a 224 cores
system. The load balance doesn't handle this correctly because
env->imbalance never decreases and it will stop pulling tasks only after
reaching loop_max, which can be equal to the number of running tasks of
the cfs. Make sure that imbalance will be decreased by at least 1.

misfit task is the other feature that doesn't handle correctly such
situation although it's probably more difficult to face the problem
because of the smaller number of CPUs and running tasks on heterogenous
system.

We can't simply ensure that task_h_load() returns at least one because it
would imply to handle underflow in other places.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Link: https://lkml.kernel.org/r/20200710152426.16981-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ptrace: Override SPSR.SS when single-stepping is enabled

commit 3a5a4366cecc25daa300b9a9174f7fdd352b9068 upstream.

Luis reports that, when reverse debugging with GDB, single-step does not
function as expected on arm64:

  | I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP
  | request by GDB won't execute the underlying instruction. As a consequence,
  | the PC doesn't move, but we return a SIGTRAP just like we would for a
  | regular successful PTRACE_SINGLESTEP request.

The underlying problem is that when the CPU register state is restored
as part of a reverse step, the SPSR.SS bit is cleared and so the hardware
single-step state can transition to the "active-pending" state, causing
an unexpected step exception to be taken immediately if a step operation
is attempted.

In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate
accessible by the GPR regset, but it's a bit late for that now. Instead,
simply prevent userspace from configuring the bit to a value which is
inconsistent with the TIF_SINGLESTEP state for the task being traced.

Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.org
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: atmel-ssc: lock with mutex instead of spinlock

commit b037d60a3b1d1227609fd858fa34321f41829911 upstream.

Uninterruptible context is not needed in the driver and causes lockdep
warning because of mutex taken in of_alias_get_id(). Convert the lock to
mutex to avoid the issue.

Cc: stable@vger.kernel.org
Fixes: 099343c64e16 ("ARM: at91: atmel-ssc: add device tree support")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.1592998403.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler

commit f5e5677c420346b4e9788051c2e4d750996c428c upstream.

NULL pointer exception happens occasionally on serial output initiated
by login timeout.  This was reproduced only if kernel was built with
significant debugging options and EDMA driver is used with serial
console.

    col-vf50 login: root
    Password:
    Login timed out after 60 seconds.
    Unable to handle kernel NULL pointer dereference at virtual address 00000044
    Internal error: Oops: 5 [#1] ARM
    CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
      (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304)
      (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c)
      (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c)
      (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160)
      (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44)
      (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8)
      (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80)
      (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98)
    Exception stack(0x8459fe80 to 0x8459fec8)
    fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013
    fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec
    fec0: 60070013 ffffffff
      (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58)
      (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8)
      (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac)
      (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc)
      (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c)
      (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0)
      (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4)
      (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14)

Issue looks like race condition between interrupt handler fsl_edma_tx_handler()
(called as result of fsl_edma_xfer_desc()) and terminating the transfer with
fsl_edma_terminate_all().

The fsl_edma_tx_handler() handles interrupt for a transfer with already freed
edesc and idle==true.

Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (emc2103) fix unable to change fan pwm1_enable attribute

commit 14b0e83dc4f1e52b94acaeb85a18fd7fdd46d2dc upstream.

This patch fixes a bug which does not let FAN mode to be changed from
sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always
remain at 0.

This is caused because the device driver handles the result of
"read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The
driver thinks an error has occurred if the (result != 0). This has been
fixed by changing the condition to (result < 0).

Signed-off-by: Vishwas M <vishwas.reddy.vr@gmail.com>
Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com
Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix build for LTS kernel caused by backporting lpj adjustment

Commit ed26aacfb5f71eecb20a ("mips: Add udelay lpj numbers adjustment")
has backported to 4.4~5.4, but the "struct cpufreq_freqs" (and also the
cpufreq notifier machanism) of 4.4~4.19 are different from the upstream
kernel. These differences cause build errors, and this patch can fix the
build.

Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Stable <stable@vger.kernel.org> # 4.4/4.9/4.14/4.19
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timer: Fix wheel index calculation on last level

commit e2a71bdea81690b6ef11f4368261ec6f5b6891aa upstream.

When an expiration delta falls into the last level of the wheel, that delta
has be compared against the maximum possible delay and reduced to fit in if
necessary.

However instead of comparing the delta against the maximum, the code
compares the actual expiry against the maximum. Then instead of fixing the
delta to fit in, it sets the maximum delta as the expiry value.

This can result in various undesired outcomes, the worst possible one
being a timer expiring 15 days ahead to fire immediately.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uio_pdrv_genirq: fix use without device tree and no interrupt

commit bf12fdf0ab728ca8e5933aac46dd972c0dd0421e upstream.

While e3a3c3a20555 ("UIO: fix uio_pdrv_genirq with device tree but no
interrupt") added support for using uio_pdrv_genirq for devices without
interrupt for device tree platforms, the removal of uio_pdrv in
26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
broke the support for non device tree platforms.

This change fixes this, so that uio_pdrv_genirq can be used without
interrupt on all platforms.

This still leaves the support that uio_pdrv had for custom interrupt
handler lacking, as uio_pdrv_genirq does not handle it (yet).

Fixes: 26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list

commit 17d51429da722cd8fc77a365a112f008abf4f8b3 upstream.

This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12.
Without nomux, the trackpad behaves as if only one finger is present and
moves the cursor when trying to scroll.

Signed-off-by: David Pedersen <limero1337@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: don't clean driver pointer

commit e852c2c251ed9c23ae6e3efebc5ec49adb504207 upstream.

It's not needed to set driver to NULL in mei_cl_device_remove()
which is bus_type remove() handler as this is done anyway
in __device_release_driver().

Actually this is causing an endless loop in driver_detach()
on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module.
The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty.
as the check is always true in  __device_release_driver()
if (dev->driver != drv)
return;

The non upstream patch is causing this behavior, titled:
'vfio -- release device lock before userspace requests'

Nevertheless the fix is correct also for the upstream.

Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/
Cc: <stable@vger.kernel.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS

commit 31070f6ccec09f3bd4f1e28cd1e592fa4f3ba0b6 upstream.

The ioctl encoding for this parameter is a long but the documentation says
it should be an int and the kernel drivers expect it to be an int.  If the
fuse driver treats this as a long it might end up scribbling over the stack
of a userspace process that only allocated enough space for an int.

This was previously discussed in [1] and a patch for fuse was proposed in
[2].  From what I can tell the patch in [2] was nacked in favor of adding
new, "fixed" ioctls and using those from userspace.  However there is still
no "fixed" version of these ioctls and the fact is that it's sometimes
infeasible to change all userspace to use the new one.

Handling the ioctls specially in the fuse driver seems like the most
pragmatic way for fuse servers to support them without causing crashes in
userspace applications that call them.

[1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/
[2]: https://sourceforge.net/p/fuse/mailman/message/31771759/

Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Fixes: 59efec7b9039 ("fuse: implement ioctl support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial

commit 897c44f0bae574c5fb318c759b060bebf9dd6013 upstream.

rproc_serial_id_table lacks an exposure to module devicetable, so
when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent
is generated and no module autoloading occurs.
Add missing MODULE_DEVICE_TABLE() annotation and move the existing
one for VIRTIO_ID_CONSOLE right to the table itself.

Fixes: 1b6370463e88 ("virtio_console: Add support for remoteproc serial")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel EG95 LTE modem

commit da6902e5b6dbca9081e3d377f9802d4fd0c5ea59 upstream.

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0195 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add GosunCn GM500 series

commit 08d4ef5cc9203a113702f24725f6cf4db476c958 upstream.

Add USB IDs for GosunCn GM500 series cellular modules.

RNDIS config:
usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=305a ProdID=1404 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

MBIM config:
usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=305a ProdID=1405 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

ECM config:
usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=305a ProdID=1406 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: add new Product ID for CH340

commit 5d0136f8e79f8287e6a36780601f0ce797cf11c2 upstream.

Add PID for CH340 that's found on some ESP8266 dev boards made by
LilyGO. The specific device that contains such serial converter can be
seen here: https://github.com/LilyGO/LILYGO-T-OI.

Apparently, it's a regular CH340, but I've confirmed with others that
also bought this board that the PID found on this device (0x7522)
differs from other devices with the "same" converter (0x7523).
Simply adding its PID to the driver and rebuilding it made it work
as expected.

Signed-off-by: Igor Moura <imphilippini@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cypress_m8: enable Simply Automated UPB PIM

commit 5c45d04c5081c1830d674f4d22d4400ea2083afe upstream.

This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module)
which allows for controlling multiple UPB compatible devices from Linux
using the standard serial interface.

Based on vendor application source code there are two different models
of USB based PIM devices in addition to a number of RS232 based PIM's.

The vendor UPB application source contains the following USB ID's:

#define USB_PCS_VENDOR_ID 0x04b4
#define USB_PCS_PIM_PRODUCT_ID 0x5500

#define USB_SAI_VENDOR_ID 0x17dd
#define USB_SAI_PIM_PRODUCT_ID 0x5500

The first set of ID's correspond to the PIM variant sold by Powerline
Control Systems while the second corresponds to the Simply Automated
Incorporated PIM. As the product ID for both of these match the default
cypress HID->COM RS232 product ID it assumed that they both use an
internal variant of this HID->COM RS232 converter hardware. However
as the vendor ID for the Simply Automated variant is different we need
to also add it to the cypress_M8 driver so that it is properly
detected.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
[ johan: amend VID define entry ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: iuu_phoenix: fix memory corruption

commit e7b931bee739e8a77ae216e613d3b99342b6dec0 upstream.

The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.

Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: function: fix missing spinlock in f_uac1_legacy

commit 8778eb0927ddcd3f431805c37b78fa56481aeed9 upstream.

Add a missing spinlock protection for play_queue, because
the play_queue may be destroyed when the "playback_work"
work func and "f_audio_out_ep_complete" callback func
operate this paly_queue at the same time.

Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: core: add wakeup support for extcon

commit 876d4e1e8298ad1f94d9e9392fc90486755437b4 upstream.

If wakeup event occurred by extcon event, it needs to call
ci_irq again since the first ci_irq calling at extcon notifier
only wakes up controller, but do noop for event handling,
it causes the extcon use case can't work well from low power mode.

Cc: <stable@vger.kernel.org>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Reported-by: Philippe Schenker <philippe.schenker@toradex.com>
Tested-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix shutdown callback in platform

commit 4fdf228cdf6925af45a2066d403821e0977bfddb upstream.

To avoid lot of interrupts from dwc2 core, which can be asserted in
specific conditions need to disable interrupts on HW level instead of
disable IRQs on Kernel level, because of IRQ can be shared between
drivers.

Cc: stable@vger.kernel.org
Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant")
Tested-by: Frank Mori Hess <fmh6jj@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: c67x00: fix use after free in c67x00_giveback_urb

commit 211f08347355cba1f769bbf3355816a12b3ddd55 upstream.

clang static analysis flags this error

c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc]
        usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
                                                             ^~~~~~~~~~~~
Problem happens in this block of code

c67x00_release_urb(c67x00, urb);
usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
spin_unlock(&c67x00->lock);
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);

In the call to c67x00_release_urb has this freeing of urbp

urbp = urb->hcpriv;
urb->hcpriv = NULL;
list_del(&urbp->hep_node);
kfree(urbp);

And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd
parameter.

Since all is required is the status, pass the status directly as is
done in c64x00_urb_dequeue

Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix race against the error recovery URB submission

commit 9b7e5208a941e2e491a83eb5fa83d889e888fa2f upstream.

USB MIDI driver has an error recovery mechanism to resubmit the URB in
the delayed timer handler, and this may race with the standard start /
stop operations.  Although both start and stop operations themselves
don't race with each other due to the umidi->mutex protection, but
this isn't applied to the timer handler.

For fixing this potential race, the following changes are applied:

- Since the timer handler can't use the mutex, we apply the
  umidi->disc_lock protection at each input stream URB submission;
  this also needs to change the GFP flag to GFP_ATOMIC
- Add a check of the URB refcount and skip if already submitted
- Move the timer cancel call at disconnection to the beginning of the
  procedure; this assures the in-flight timer handler is gone properly
  before killing all pending URBs

Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com
Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Perform sanity check for each URB creation

commit 6e8a914ad619042c5f25a4feb663357c4170fd8d upstream.

LINE6 drivers create stream URBs with a fixed pipe without checking
its validity, and this may lead to a kernel WARNING at the submission
when a malformed USB descriptor is passed.

For avoiding the kernel warning, perform the similar sanity checks for
each pipe type at creating a URB.

Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Add a helper function to check the validity of EP type in URB

commit e901b9873876ca30a09253731bd3a6b00c44b5b0 upstream.

This patch adds a new helper function to perform a sanity check of the
given URB to see whether it contains a valid endpoint.  It's a light-
weight version of what usb_submit_urb() does, but without the kernel
warning followed by the stack trace, just returns an error code.

Especially for a driver that doesn't parse the descriptor but fills
the URB with the fixed endpoint (e.g. some quirks for non-compliant
devices), this kind of check is preferable at the probe phase before
actually submitting the urb.

Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: magicmouse: do not set up autorepeat

commit 6363d2065cd399cf9d6dc9d08c437f8658831100 upstream.

Neither the trackpad, nor the mouse want input core to generate autorepeat
events for their buttons, so let's reset the bit (as hid-input sets it for
these devices based on the usage vendor code).

Cc: stable@vger.kernel.org
Reported-by: Yariv <oigevald+kernel@gmail.com>
Tested-by: Yariv <oigevald+kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: brcmnand: fix CS0 layout

commit 3d3fb3c5be9ce07fa85d8f67fb3922e4613b955b upstream.

Only v3.3-v5.0 have a different CS0 layout.
Controllers before v3.3 use the same layout for every CS.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf stat: Zero all the 'ena' and 'run' array slot stats for interval mode

commit 0e0bf1ea1147fcf74eab19c2d3c853cc3740a72f upstream.

As the code comments in perf_stat_process_counter() say, we calculate
counter's data every interval, and the display code shows ps->res_stats
avg value. We need to zero the stats for interval mode.

But the current code only zeros the res_stats[0], it doesn't zero the
res_stats[1] and res_stats[2], which are for ena and run of counter.

This patch zeros the whole res_stats[] for interval mode.

Fixes: 51fd2df1e882 ("perf stat: Fix interval output values")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema

[ Upstream commit d7adfe5ffed9faa05f8926223086b101e14f700d ]

Fix dtschema validator warnings like:
    l2-cache@fffff000: $nodename:0:
        'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'

Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "thermal: mediatek: fix register index error"

[ Upstream commit a8f62f183021be389561570ab5f8c701a5e70298 ]

This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6

The above patch is supposed to fix a register index error on mt2701. It
is not clear if the problem solved is a hang or just an invalid value
returned, my guess is the second. The patch introduces, though, a new
hang on MT8173 device making them unusable. So, seems reasonable, revert
the patch because introduces a worst issue.

The reason I send a revert instead of trying to fix the issue for MT8173
is because the information needed to fix the issue is in the datasheet
and is not public. So I am not really able to fix it.

Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173
devices.

[    2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001
[    2.230421] Mem abort info:
[    2.233207]   ESR = 0x96000021
[    2.236261]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.241571]   SET = 0, FnV = 0
[    2.244623]   EA = 0, S1PTW = 0
[    2.247762] Data abort info:
[    2.250640]   ISV = 0, ISS = 0x00000021
[    2.254473]   CM = 0, WnR = 0
[    2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000
[    2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707
[    2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[    2.280432] Modules linked in:
[    2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162
[    2.289914] Hardware name: Google Elm (DT)
[    2.294003] pstate: 20000005 (nzCv daif -PAN -UAO)
[    2.298792] pc : mtk_read_temp+0xb8/0x1c8
[    2.302793] lr : mtk_read_temp+0x7c/0x1c8
[    2.306794] sp : ffff80001003b930
[    2.310100] x29: ffff80001003b930 x28: 0000000000000000
[    2.315404] x27: 0000000000000002 x26: ffff0000f9550b10
[    2.320709] x25: ffff0000f9550a80 x24: 0000000000000090
[    2.326014] x23: ffff80001003ba24 x22: 00000000610344c0
[    2.331318] x21: 0000000000002710 x20: 00000000000001f4
[    2.336622] x19: 0000000000030d40 x18: ffff800011742ec0
[    2.341926] x17: 0000000000000001 x16: 0000000000000001
[    2.347230] x15: ffffffffffffffff x14: ffffff0000000000
[    2.352535] x13: ffffffffffffffff x12: 0000000000000028
[    2.357839] x11: 0000000000000003 x10: ffff800011295ec8
[    2.363143] x9 : 000000000000291b x8 : 0000000000000002
[    2.368447] x7 : 00000000000000a8 x6 : 0000000000000004
[    2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0
[    2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001
[    2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80
[    2.389665] Call trace:
[    2.392105]  mtk_read_temp+0xb8/0x1c8
[    2.395760]  of_thermal_get_temp+0x2c/0x40
[    2.399849]  thermal_zone_get_temp+0x78/0x160
[    2.404198]  thermal_zone_device_update.part.0+0x3c/0x1f8
[    2.409589]  thermal_zone_device_update+0x34/0x48
[    2.414286]  of_thermal_set_mode+0x58/0x88
[    2.418375]  thermal_zone_of_sensor_register+0x1a8/0x1d8
[    2.423679]  devm_thermal_zone_of_sensor_register+0x64/0xb0
[    2.429242]  mtk_thermal_probe+0x690/0x7d0
[    2.433333]  platform_drv_probe+0x5c/0xb0
[    2.437335]  really_probe+0xe4/0x448
[    2.440901]  driver_probe_device+0xe8/0x140
[    2.445077]  device_driver_attach+0x7c/0x88
[    2.449252]  __driver_attach+0xac/0x178
[    2.453082]  bus_for_each_dev+0x78/0xc8
[    2.456909]  driver_attach+0x2c/0x38
[    2.460476]  bus_add_driver+0x14c/0x230
[    2.464304]  driver_register+0x6c/0x128
[    2.468131]  __platform_driver_register+0x50/0x60
[    2.472831]  mtk_thermal_driver_init+0x24/0x30
[    2.477268]  do_one_initcall+0x50/0x298
[    2.481098]  kernel_init_freeable+0x1ec/0x264
[    2.485450]  kernel_init+0x1c/0x110
[    2.488931]  ret_from_fork+0x10/0x1c
[    2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042)
[    2.498599] ---[ end trace e43e3105ed27dc99 ]---
[    2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    2.511020] SMP: stopping secondary CPUs
[    2.514941] Kernel Offset: disabled
[    2.518421] CPU features: 0x090002,25006005
[    2.522595] Memory Limit: none
[    2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--

Cc: Michael Kao <michael.kao@mediatek.com>
Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: comedi: verify array index is correct before using it

[ Upstream commit ef75e14a6c935eec82abac07ab68e388514e39bc ]

This code reads from the array before verifying that "trig" is a valid
index.  If the index is wildly out of bounds then reading from an
invalid address could lead to an Oops.

Fixes: a8c66b684efa ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200709102936.GA20875@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: atmel: fix uninitialized read in debug printk

[ Upstream commit 30517ffeb3bff842e1355cbc32f1959d9dbb5414 ]

Fixed commit moved the assignment of 'req', but did not update a
reference in the DBG() call. Use the argument as it was renamed.

Fixes: 5fb694f96e7c ("usb: gadget: udc: atmel: fix possible oops when unloading module")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate

[ Upstream commit ed7815db70d17b1741883f2da8e1d80bc2efe517 ]

A SPI transfer defines the _maximum_ speed of the SPI transfer. However the
driver doesn't take into account that the clock divider is always rounded down
(due to integer arithmetics). This results in a too high clock rate for the SPI
transfer.

E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the
original code calculates a reg of "0", which results in a effective divider of
"2" and a 12 MHz clock for the SPI transfer.

This patch fixes the issue by using DIV_ROUND_UP() instead of a plain
integer division.

While there simplify the divider calculation for the CDR1 case, use
order_base_2() instead of two ilog2() calculations.

Fixes: 3558fe900e8a ("spi: sunxi: Add Allwinner A31 SPI controller driver")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200706143443.9855-2-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio:health:afe4404 Fix timestamp alignment and prevent data leak.

[ Upstream commit f88ecccac4be348bbcc6d056bdbc622a8955c04d ]

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 40 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc so no
data can leak appart from previous readings.

Fixes: 87aec56e27ef ("iio: health: Add driver for the TI AFE4404 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb/ohci-platform: Fix a warning when hibernating"

This reverts commit 104592a5233d77322c3e527e3925dc7c5a30a6af.

Eugeniu Rosca writes:

On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
>   of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device
>   link support"). Getting evidence for that is easy. Reverting
>   987351e1ea7772 in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea7772 ("phy: core: Add consumer device
>   link support") to v4.14.187 looks challenging enough, so probably not
>   worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
>   should the following three v4.14.186 commits be reverted on v4.14.x?
>   * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
>   * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
>   * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")

Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb/xhci-plat: Set PM runtime as active on resume"

This reverts commit 9e148a5e5e0929a4cb3000de9c843a07508ce575.

Eugeniu Rosca writes:

On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
>   of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device
>   link support"). Getting evidence for that is easy. Reverting
>   987351e1ea7772 in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea7772 ("phy: core: Add consumer device
>   link support") to v4.14.187 looks challenging enough, so probably not
>   worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
>   should the following three v4.14.186 commits be reverted on v4.14.x?
>   * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
>   * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
>   * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")

Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb/ehci-platform: Set PM runtime as active on resume"

This reverts commit 5365fc3132a36a027fd7c2bb461e651b37f1e4d1.

Eugeniu Rosca writes:

On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
>   of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device
>   link support"). Getting evidence for that is easy. Reverting
>   987351e1ea7772 in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea7772 ("phy: core: Add consumer device
>   link support") to v4.14.187 looks challenging enough, so probably not
>   worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
>   should the following three v4.14.186 commits be reverted on v4.14.x?
>   * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
>   * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
>   * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")

Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: bcm_sf2: Fix node reference count

[ Upstream commit 8dbe4c5d5e40fe140221024f7b16bec9f310bf70 ]

of_find_node_by_name() will do an of_node_put() on the "from" argument.
With CONFIG_OF_DYNAMIC enabled which checks for device_node reference
counts, we would be getting a warning like this:

[    6.347230] refcount_t: increment on 0; use-after-free.
[    6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156
refcount_inc_checked+0x38/0x44
[    6.360601] Modules linked in:
[    6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G        W
5.4.46-gb78b3e9956e6 #13
[    6.372546] Hardware name: BCM97278SV (DT)
[    6.376649] Workqueue: events deferred_probe_work_func
[    6.381796] pstate: 60000005 (nZCv daif -PAN -UAO)
[    6.386595] pc : refcount_inc_checked+0x38/0x44
[    6.391133] lr : refcount_inc_checked+0x38/0x44
...
[    6.478791] Call trace:
[    6.481243]  refcount_inc_checked+0x38/0x44
[    6.485433]  kobject_get+0x3c/0x4c
[    6.488840]  of_node_get+0x24/0x34
[    6.492247]  of_irq_find_parent+0x3c/0xe0
[    6.496263]  of_irq_parse_one+0xe4/0x1d0
[    6.500191]  irq_of_parse_and_map+0x44/0x84
[    6.504381]  bcm_sf2_sw_probe+0x22c/0x844
[    6.508397]  platform_drv_probe+0x58/0xa8
[    6.512413]  really_probe+0x238/0x3fc
[    6.516081]  driver_probe_device+0x11c/0x12c
[    6.520358]  __device_attach_driver+0xa8/0x100
[    6.524808]  bus_for_each_drv+0xb4/0xd0
[    6.528650]  __device_attach+0xd0/0x164
[    6.532493]  device_initial_probe+0x24/0x30
[    6.536682]  bus_probe_device+0x38/0x98
[    6.540524]  deferred_probe_work_func+0xa8/0xd4
[    6.545061]  process_one_work+0x178/0x288
[    6.549078]  process_scheduled_works+0x44/0x48
[    6.553529]  worker_thread+0x218/0x270
[    6.557285]  kthread+0xdc/0xe4
[    6.560344]  ret_from_fork+0x10/0x18
[    6.563925] ---[ end trace 68f65caf69bb152a ]---

Fix this by adding a of_node_get() to increment the reference count
prior to the call.

Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fix initial SPI_SR value in spi-fsl-dspi

[ Upstream commit aa54c1c9d90e6db75190813907190fadcce1bf45 ]

On ColdFire mcf54418, using DSPI_DMA_MODE mode, spi transfers
at first boot stage are not succeding:

m25p80 spi0.1: unrecognized JEDEC id bytes: 00, 00, 00

The reason is the SPI_SR initial value set by the driver, that
is not clearing (not setting to 1) the RF_DF flag. After a tour
on the dspi hw modules that use this driver(Vybrid, ColdFire and
ls1021a) a better init value for SR register has been set.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio:health:afe4403 Fix timestamp alignment and prevent data leak.

commit 3f9c6d38797e9903937b007a341dad0c251765d6 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc so no
data can leak appart from previous readings.

Fixes: eec96d1e2d31 ("iio: health: Add driver for the TI AFE4403 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:pressure:ms5611 Fix buffer element alignment

commit 8db4afe163bbdd93dca6fcefbb831ef12ecc6b4d upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here there is no data leak possibility so use an explicit structure
on the stack to ensure alignment and nice readable fashion.

The forced alignment of ts isn't strictly necessary in this driver
as the padding will be correct anyway (there isn't any).  However
it is probably less fragile to have it there and it acts as
documentation of the requirement.

Fixes: 713bbb4efb9dc ("iio: pressure: ms5611: Add triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: zpa2326: handle pm_runtime_get_sync failure

commit d88de040e1df38414fc1e4380be9d0e997ab4d58 upstream.

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()

commit d7369ae1f4d7cffa7574d15e1f787dcca184c49d upstream.

The function iio_device_register() was called in mma8452_probe().
But the function iio_device_unregister() was not called after
a call of the function mma8452_set_freefall_mode() failed.
Thus add the missed function call for one error case.

Fixes: 1a965d405fc6 ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: magnetometer: ak8974: Fix runtime PM imbalance on error

commit 0187294d227dfc42889e1da8f8ce1e44fc25f147 upstream.

When devm_regmap_init_i2c() returns an error code, a pairing
runtime PM usage counter decrement is needed to keep the
counter balanced. For error paths after ak8974_set_power(),
ak8974_detect() and ak8974_reset(), things are the same.

However, When iio_triggered_buffer_setup() returns an error
code, there will be two PM usgae counter decrements.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:magnetometer:ak8974: Fix alignment and data leak issues

commit 838e00b13bfd4cac8b24df25bfc58e2eb99bcc70 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data.

This data is allocated with kzalloc so no data can leak appart from
previous readings.

Fixes: 7c94a8b2ee8cf ("iio: magn: add a driver for AK8974")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: eg20t: Load module automatically if ID matches

[ Upstream commit 5f90786b31fb7d1e199a8999d46c4e3aea672e11 ]

The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: Fix sock_cgroup_data on big-endian.

[ Upstream commit 14b032b8f8fce03a546dcf365454bec8c4a58d7d ]

In order for no_refcnt and is_data to be the lowest order two
bits in the 'val' we have to pad out the bitfield of the u8.

Fixes: ad0f75e5f57c ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: fix cgroup_sk_alloc() for sk_clone_lock()

[ Upstream commit ad0f75e5f57ccbceec13274e1e242f2b5a6397ed ]

When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.

sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.

The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.

This bug seems to be introduced since the beginning, commit
d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229af
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.

Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: md5: allow changing MD5 keys in all socket states

[ Upstream commit 1ca0fafd73c5268e8fc4b997094b8bb2bfe8deea ]

This essentially reverts commit 721230326891 ("tcp: md5: reject TCP_MD5SIG
or TCP_MD5SIG_EXT on established sockets")

Mathieu reported that many vendors BGP implementations can
actually switch TCP MD5 on established flows.

Quoting Mathieu :
   Here is a list of a few network vendors along with their behavior
   with respect to TCP MD5:

   - Cisco: Allows for password to be changed, but within the hold-down
     timer (~180 seconds).
   - Juniper: When password is initially set on active connection it will
     reset, but after that any subsequent password changes no network
     resets.
   - Nokia: No notes on if they flap the tcp connection or not.
   - Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until
     both sides are ok with new passwords.
   - Meta-Switch: Expects the password to be set before a connection is
     attempted, but no further info on whether they reset the TCP
     connection on a change.
   - Avaya: Disable the neighbor, then set password, then re-enable.
   - Zebos: Would normally allow the change when socket connected.

We can revert my prior change because commit 9424e2e7ad93 ("tcp: md5: fix potential
overestimation of TCP option space") removed the leak of 4 kernel bytes to
the wire that was the main reason for my patch.

While doing my investigations, I found a bug when a MD5 key is changed, leading
to these commits that stable teams want to consider before backporting this revert :

 Commit 6a2febec338d ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
 Commit e6ced831ef11 ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers")

Fixes: 721230326891 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: md5: do not send silly options in SYNCOOKIES

[ Upstream commit e114e1e8ac9d31f25b9dd873bab5d80c1fc482ca ]

Whenever cookie_init_timestamp() has been used to encode
ECN,SACK,WSCALE options, we can not remove the TS option in the SYNACK.

Otherwise, tcp_synack_options() will still advertize options like WSCALE
that we can not deduce later when receiving the packet from the client
to complete 3WHS.

Note that modern linux TCP stacks wont use MD5+TS+SACK in a SYN packet,
but we can not know for sure that all TCP stacks have the same logic.

Before the fix a tcpdump would exhibit this wrong exchange :

10:12:15.464591 IP C > S: Flags [S], seq 4202415601, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 456965269 ecr 0,nop,wscale 8], length 0
10:12:15.464602 IP S > C: Flags [S.], seq 253516766, ack 4202415602, win 65535, options [nop,nop,md5 valid,mss 1400,nop,nop,sackOK,nop,wscale 8], length 0
10:12:15.464611 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid], length 0
10:12:15.464678 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid], length 12
10:12:15.464685 IP S > C: Flags [.], ack 13, win 65535, options [nop,nop,md5 valid], length 0

After this patch the exchange looks saner :

11:59:59.882990 IP C > S: Flags [S], seq 517075944, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508483 ecr 0,nop,wscale 8], length 0
11:59:59.883002 IP S > C: Flags [S.], seq 1902939253, ack 517075945, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508479 ecr 1751508483,nop,wscale 8], length 0
11:59:59.883012 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 0
11:59:59.883114 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 12
11:59:59.883122 IP S > C: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508483], length 0
11:59:59.883152 IP S > C: Flags [P.], seq 1:13, ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508483], length 12
11:59:59.883170 IP C > S: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508484], length 0

Of course, no SACK block will ever be added later, but nothing should break.
Technically, we could remove the 4 nops included in MD5+TS options,
but again some stacks could break seeing not conventional alignment.

Fixes: 4957faade11b ("TCPCT part 1g: Responder Cookie => Initiator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: make sure listeners don't initialize congestion-control state

[ Upstream commit ce69e563b325f620863830c246a8698ccea52048 ]

syzkaller found its way into setsockopt with TCP_CONGESTION "cdg".
tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock
just copies all the memory, the allocated pointer will be copied as
well, if the app called setsockopt(..., TCP_CONGESTION) on the listener.
If now the socket will be destroyed before the congestion-control
has properly been initialized (through a call to tcp_init_transfer), we
will end up freeing memory that does not belong to that particular
socket, opening the door to a double-free:

[   11.413102] ==================================================================
[   11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0
[   11.415329]
[   11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80
[   11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   11.418148] Call Trace:
[   11.418534]  <IRQ>
[   11.418834]  dump_stack+0x7d/0xb0
[   11.419297]  print_address_description.constprop.0+0x1a/0x210
[   11.422079]  kasan_report_invalid_free+0x51/0x80
[   11.423433]  __kasan_slab_free+0x15e/0x170
[   11.424761]  kfree+0x8c/0x230
[   11.425157]  tcp_cleanup_congestion_control+0x58/0xd0
[   11.425872]  tcp_v4_destroy_sock+0x57/0x5a0
[   11.426493]  inet_csk_destroy_sock+0x153/0x2c0
[   11.427093]  tcp_v4_syn_recv_sock+0xb29/0x1100
[   11.427731]  tcp_get_cookie_sock+0xc3/0x4a0
[   11.429457]  cookie_v4_check+0x13d0/0x2500
[   11.433189]  tcp_v4_do_rcv+0x60e/0x780
[   11.433727]  tcp_v4_rcv+0x2869/0x2e10
[   11.437143]  ip_protocol_deliver_rcu+0x23/0x190
[   11.437810]  ip_local_deliver+0x294/0x350
[   11.439566]  __netif_receive_skb_one_core+0x15d/0x1a0
[   11.441995]  process_backlog+0x1b1/0x6b0
[   11.443148]  net_rx_action+0x37e/0xc40
[   11.445361]  __do_softirq+0x18c/0x61a
[   11.445881]  asm_call_on_stack+0x12/0x20
[   11.446409]  </IRQ>
[   11.446716]  do_softirq_own_stack+0x34/0x40
[   11.447259]  do_softirq.part.0+0x26/0x30
[   11.447827]  __local_bh_enable_ip+0x46/0x50
[   11.448406]  ip_finish_output2+0x60f/0x1bc0
[   11.450109]  __ip_queue_xmit+0x71c/0x1b60
[   11.451861]  __tcp_transmit_skb+0x1727/0x3bb0
[   11.453789]  tcp_rcv_state_process+0x3070/0x4d3a
[   11.456810]  tcp_v4_do_rcv+0x2ad/0x780
[   11.457995]  __release_sock+0x14b/0x2c0
[   11.458529]  release_sock+0x4a/0x170
[   11.459005]  __inet_stream_connect+0x467/0xc80
[   11.461435]  inet_stream_connect+0x4e/0xa0
[   11.462043]  __sys_connect+0x204/0x270
[   11.465515]  __x64_sys_connect+0x6a/0xb0
[   11.466088]  do_syscall_64+0x3e/0x70
[   11.466617]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   11.467341] RIP: 0033:0x7f56046dc469
[   11.467844] Code: Bad RIP value.
[   11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
[   11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469
[   11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004
[   11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000
[   11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003
[   11.474321]
[   11.474527] Allocated by task 4884:
[   11.475031]  save_stack+0x1b/0x40
[   11.475548]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   11.476182]  tcp_cdg_init+0xf0/0x150
[   11.476744]  tcp_init_congestion_control+0x9b/0x3a0
[   11.477435]  tcp_set_congestion_control+0x270/0x32f
[   11.478088]  do_tcp_setsockopt.isra.0+0x521/0x1a00
[   11.478744]  __sys_setsockopt+0xff/0x1e0
[   11.479259]  __x64_sys_setsockopt+0xb5/0x150
[   11.479895]  do_syscall_64+0x3e/0x70
[   11.480395]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   11.481097]
[   11.481321] Freed by task 4872:
[   11.481783]  save_stack+0x1b/0x40
[   11.482230]  __kasan_slab_free+0x12c/0x170
[   11.482839]  kfree+0x8c/0x230
[   11.483240]  tcp_cleanup_congestion_control+0x58/0xd0
[   11.483948]  tcp_v4_destroy_sock+0x57/0x5a0
[   11.484502]  inet_csk_destroy_sock+0x153/0x2c0
[   11.485144]  tcp_close+0x932/0xfe0
[   11.485642]  inet_release+0xc1/0x1c0
[   11.486131]  __sock_release+0xc0/0x270
[   11.486697]  sock_close+0xc/0x10
[   11.487145]  __fput+0x277/0x780
[   11.487632]  task_work_run+0xeb/0x180
[   11.488118]  __prepare_exit_to_usermode+0x15a/0x160
[   11.488834]  do_syscall_64+0x4a/0x70
[   11.489326]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Wei Wang fixed a part of these CDG-malloc issues with commit c12014440750
("tcp: memset ca_priv data to 0 properly").

This patch here fixes the listener-scenario: We make sure that listeners
setting the congestion-control through setsockopt won't initialize it
(thus CDG never allocates on listeners). For those who use AF_UNSPEC to
reuse a socket, tcp_disconnect() is changed to cleanup afterwards.

(The issue can be reproduced at least down to v4.4.x.)

Cc: Wei Wang <weiwan@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 2b0a8c9eee81 ("tcp: add CDG congestion control")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genetlink: remove genl_bind

[ Upstream commit 1e82a62fec613844da9e558f3493540a5b7a7b67 ]

A potential deadlock can occur during registering or unregistering a
new generic netlink family between the main nl_table_lock and the
cb_lock where each thread wants the lock held by the other, as
demonstrated below.

1) Thread 1 is performing a netlink_bind() operation on a socket. As part
   of this call, it will call netlink_lock_table(), incrementing the
   nl_table_users count to 1.
2) Thread 2 is registering (or unregistering) a genl_family via the
   genl_(un)register_family() API. The cb_lock semaphore will be taken for
   writing.
3) Thread 1 will call genl_bind() as part of the bind operation to handle
   subscribing to GENL multicast groups at the request of the user. It will
   attempt to take the cb_lock semaphore for reading, but it will fail and
   be scheduled away, waiting for Thread 2 to finish the write.
4) Thread 2 will call netlink_table_grab() during the (un)registration
   call. However, as Thread 1 has incremented nl_table_users, it will not
   be able to proceed, and both threads will be stuck waiting for the
   other.

genl_bind() is a noop, unless a genl_family implements the mcast_bind()
function to handle setting up family-specific multicast operations. Since
no one in-tree uses this functionality as Cong pointed out, simply removing
the genl_bind() function will remove the possibility for deadlock, as there
is no attempt by Thread 1 above to take the cb_lock semaphore.

Fixes: c380d9a7afff ("genetlink: pass multicast bind/unbind to families")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers

[ Upstream commit e6ced831ef11a2a06e8d00aad9d4fc05b610bf38 ]

My prior fix went a bit too far, according to Herbert and Mathieu.

Since we accept that concurrent TCP MD5 lookups might see inconsistent
keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb()

Clearing all key->key[] is needed to avoid possible KMSAN reports,
if key->keylen is increased. Since tcp_md5_do_add() is not fast path,
using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler.

data_race() was added in linux-5.8 and will prevent KCSAN reports,
this can safely be removed in stable backports, if data_race() is
not yet backported.

v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add()

Fixes: 6a2febec338d ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Marco Elver <elver@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()

[ Upstream commit 6a2febec338df7e7699a52d00b2e1207dcf65b28 ]

MD5 keys are read with RCU protection, and tcp_md5_do_add()
might update in-place a prior key.

Normally, typical RCU updates would allocate a new piece
of memory. In this case only key->key and key->keylen might
be updated, and we do not care if an incoming packet could
see the old key, the new one, or some intermediate value,
since changing the key on a live flow is known to be problematic
anyway.

We only want to make sure that in the case key->keylen
is changed, cpus in tcp_md5_hash_key() wont try to use
uninitialized data, or crash because key->keylen was
read twice to feed sg_init_one() and ahash_request_set_crypt()

Fixes: 9ea88a153001 ("tcp: md5: check md5 signature without socket lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: qmi_wwan: add support for Quectel EG95 LTE modem

[ Upstream commit f815dd5cf48b905eeecf0a2b990e9b7ab048b4f1 ]

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0195 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb

[ Upstream commit 394de110a73395de2ca4516b0de435e91b11b604 ]

The packets from tunnel devices (eg bareudp) may have only
metadata in the dst pointer of skb. Hence a pointer check of
neigh_lookup is needed in dst_neigh_lookup_skb

Kernel crashes when packets from bareudp device is processed in
the kernel neighbour subsytem.

[  133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  133.385240] #PF: supervisor instruction fetch in kernel mode
[  133.385828] #PF: error_code(0x0010) - not-present page
[  133.386603] PGD 0 P4D 0
[  133.386875] Oops: 0010 [#1] SMP PTI
[  133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G        W         5.8.0-rc2+ #15
[  133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  133.391076] RIP: 0010:0x0
[  133.392401] Code: Bad RIP value.
[  133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246
[  133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00
[  133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400
[  133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000
[  133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400
[  133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003
[  133.401667] FS:  00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000
[  133.402412] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0
[  133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.404933] Call Trace:
[  133.405169]  <IRQ>
[  133.405367]  __neigh_update+0x5a4/0x8f0
[  133.405734]  arp_process+0x294/0x820
[  133.406076]  ? __netif_receive_skb_core+0x866/0xe70
[  133.406557]  arp_rcv+0x129/0x1c0
[  133.406882]  __netif_receive_skb_one_core+0x95/0xb0
[  133.407340]  process_backlog+0xa7/0x150
[  133.407705]  net_rx_action+0x2af/0x420
[  133.408457]  __do_softirq+0xda/0x2a8
[  133.408813]  asm_call_on_stack+0x12/0x20
[  133.409290]  </IRQ>
[  133.409519]  do_softirq_own_stack+0x39/0x50
[  133.410036]  do_softirq+0x50/0x60
[  133.410401]  __local_bh_enable_ip+0x50/0x60
[  133.410871]  ip_finish_output2+0x195/0x530
[  133.411288]  ip_output+0x72/0xf0
[  133.411673]  ? __ip_finish_output+0x1f0/0x1f0
[  133.412122]  ip_send_skb+0x15/0x40
[  133.412471]  raw_sendmsg+0x853/0xab0
[  133.412855]  ? insert_pfn+0xfe/0x270
[  133.413827]  ? vvar_fault+0xec/0x190
[  133.414772]  sock_sendmsg+0x57/0x80
[  133.415685]  __sys_sendto+0xdc/0x160
[  133.416605]  ? syscall_trace_enter+0x1d4/0x2b0
[  133.417679]  ? __audit_syscall_exit+0x1d9/0x280
[  133.418753]  ? __prepare_exit_to_usermode+0x5d/0x1a0
[  133.419819]  __x64_sys_sendto+0x24/0x30
[  133.420848]  do_syscall_64+0x4d/0x90
[  133.421768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  133.422833] RIP: 0033:0x7fe013689c03
[  133.423749] Code: Bad RIP value.
[  133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03
[  133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003
[  133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010
[  133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[  133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080
[  133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod
[  133.444045] CR2: 0000000000000000
[  133.445082] ---[ end trace f4aeee1958fd1638 ]---
[  133.446236] RIP: 0010:0x0
[  133.447180] Code: Bad RIP value.
[  133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246
[  133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00
[  133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400
[  133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000
[  133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400
[  133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003
[  133.456520] FS:  00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000
[  133.458046] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0
[  133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.463697] Kernel panic - not syncing: Fatal exception in interrupt
[  133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: aaa0c23cb901 ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

llc: make sure applications use ARPHRD_ETHER

[ Upstream commit a9b1110162357689a34992d5c925852948e5b9fd ]

syzbot was to trigger a bug by tricking AF_LLC with
non sensible addr->sllc_arphrd

It seems clear LLC requires an Ethernet device.

Back in commit abf9d537fea2 ("llc: add support for SO_BINDTODEVICE")
Octavian Purdila added possibility for application to use a zero
value for sllc_arphrd, convert it to ARPHRD_ETHER to not cause
regressions on existing applications.

BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:199 [inline]
BUG: KASAN: use-after-free in list_empty include/linux/list.h:268 [inline]
BUG: KASAN: use-after-free in waitqueue_active include/linux/wait.h:126 [inline]
BUG: KASAN: use-after-free in wq_has_sleeper include/linux/wait.h:160 [inline]
BUG: KASAN: use-after-free in skwq_has_sleeper include/net/sock.h:2092 [inline]
BUG: KASAN: use-after-free in sock_def_write_space+0x642/0x670 net/core/sock.c:2813
Read of size 8 at addr ffff88801e0b4078 by task ksoftirqd/3/27

CPU: 3 PID: 27 Comm: ksoftirqd/3 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __read_once_size include/linux/compiler.h:199 [inline]
 list_empty include/linux/list.h:268 [inline]
 waitqueue_active include/linux/wait.h:126 [inline]
 wq_has_sleeper include/linux/wait.h:160 [inline]
 skwq_has_sleeper include/net/sock.h:2092 [inline]
 sock_def_write_space+0x642/0x670 net/core/sock.c:2813
 sock_wfree+0x1e1/0x260 net/core/sock.c:1958
 skb_release_head_state+0xeb/0x260 net/core/skbuff.c:652
 skb_release_all+0x16/0x60 net/core/skbuff.c:663
 __kfree_skb net/core/skbuff.c:679 [inline]
 consume_skb net/core/skbuff.c:838 [inline]
 consume_skb+0xfb/0x410 net/core/skbuff.c:832
 __dev_kfree_skb_any+0xa4/0xd0 net/core/dev.c:2967
 dev_kfree_skb_any include/linux/netdevice.h:3650 [inline]
 e1000_unmap_and_free_tx_resource.isra.0+0x21b/0x3a0 drivers/net/ethernet/intel/e1000/e1000_main.c:1963
 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3854 [inline]
 e1000_clean+0x4cc/0x1d10 drivers/net/ethernet/intel/e1000/e1000_main.c:3796
 napi_poll net/core/dev.c:6532 [inline]
 net_rx_action+0x508/0x1120 net/core/dev.c:6600
 __do_softirq+0x262/0x98c kernel/softirq.c:292
 run_ksoftirqd kernel/softirq.c:603 [inline]
 run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595
 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165
 kthread+0x361/0x430 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 8247:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc mm/kasan/common.c:513 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521
 slab_post_alloc_hook mm/slab.h:584 [inline]
 slab_alloc mm/slab.c:3320 [inline]
 kmem_cache_alloc+0x121/0x710 mm/slab.c:3484
 sock_alloc_inode+0x1c/0x1d0 net/socket.c:240
 alloc_inode+0x68/0x1e0 fs/inode.c:230
 new_inode_pseudo+0x19/0xf0 fs/inode.c:919
 sock_alloc+0x41/0x270 net/socket.c:560
 __sock_create+0xc2/0x730 net/socket.c:1384
 sock_create net/socket.c:1471 [inline]
 __sys_socket+0x103/0x220 net/socket.c:1513
 __do_sys_socket net/socket.c:1522 [inline]
 __se_sys_socket net/socket.c:1520 [inline]
 __ia32_sys_socket+0x73/0xb0 net/socket.c:1520
 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline]
 do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408
 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139

Freed by task 17:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:335 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
 __cache_free mm/slab.c:3426 [inline]
 kmem_cache_free+0x86/0x320 mm/slab.c:3694
 sock_free_inode+0x20/0x30 net/socket.c:261
 i_callback+0x44/0x80 fs/inode.c:219
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch kernel/rcu/tree.c:2183 [inline]
 rcu_core+0x570/0x1540 kernel/rcu/tree.c:2408
 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2417
 __do_softirq+0x262/0x98c kernel/softirq.c:292

The buggy address belongs to the object at ffff88801e0b4000
 which belongs to the cache sock_inode_cache of size 1152
The buggy address is located 120 bytes inside of
 1152-byte region [ffff88801e0b4000, ffff88801e0b4480)
The buggy address belongs to the page:
page:ffffea0000782d00 refcount:1 mapcount:0 mapping:ffff88807aa59c40 index:0xffff88801e0b4ffd
raw: 00fffe0000000200 ffffea00008e6c88 ffffea0000782d48 ffff88807aa59c40
raw: ffff88801e0b4ffd ffff88801e0b4000 0000000100000003 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88801e0b3f00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88801e0b3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88801e0b4000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                ^
 ffff88801e0b4080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88801e0b4100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: abf9d537fea2 ("llc: add support for SO_BINDTODEVICE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: remove skb_dst_set() from l2tp_xmit_skb()

[ Upstream commit 27d53323664c549b5bb2dfaaf6f7ad6e0376a64e ]

In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set
skb's dst. However, it will eventually call inet6_csk_xmit() or
ip_queue_xmit() where skb's dst will be overwritten by:

   skb_dst_set_noref(skb, dst);

without releasing the old dst in skb. Then it causes dst/dev refcnt leak:

  unregister_netdevice: waiting for eth0 to become free. Usage count = 1

This can be reproduced by simply running:

  # modprobe l2tp_eth && modprobe l2tp_ip
  # sh ./tools/testing/selftests/net/l2tp.sh

So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst
should be dropped. This patch is to fix it by removing skb_dst_set()
from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().

Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Tested-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fill fl4_icmp_{type,code} in ping_v4_sendmsg

[ Upstream commit 5eff06902394425c722f0a44d9545909a8800f79 ]

IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to
incomplete IPsec ACQUIRE messages being sent to userspace. Currently,
both raw sockets and IPv6 ping sockets set those fields.

Expected output of "ip xfrm monitor":
    acquire proto esp
      sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4
      policy src 10.0.2.15/32 dst 8.8.8.8/32
        <snip>

Currently with ping sockets:
    acquire proto esp
      sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4
      policy src 10.0.2.15/32 dst 8.8.8.8/32
        <snip>

The Libreswan test suite found this problem after Fedora changed the
value for the sysctl net.ipv4.ping_group_range.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Paul Wouters <pwouters@redhat.com>
Tested-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: fix huge pte soft dirty copying

commit 528a9539348a0234375dfaa1ca5dbbb2f8f8e8d2 upstream.

If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty).
This fixes some cases for guest migration with huge page backings.

Cc: <stable@vger.kernel.org> # 4.8
Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: elf: use right ELF_ARCH

commit b7faf971081a4e56147f082234bfff55135305cb upstream.

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE

commit 00fdec98d9881bf5173af09aebd353ab3b9ac729 upstream.

Trap handler for syscall tracing reads EFA (Exception Fault Address),
in case strace wants PC of trap instruction (EFA is not part of pt_regs
as of current code).

However this EFA read is racy as it happens after dropping to pure
kernel mode (re-enabling interrupts). A taken interrupt could
context-switch, trigger a different task's trap, clobbering EFA for this
execution context.

Fix this by reading EFA early, before re-enabling interrupts. A slight
side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler.
The trap handler is common to both ARCompact and ARCv2 builds too.

This just came out of code rework/review and no real problem was reported
but is clearly a potential problem specially for strace.

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix double free

commit 41855a898650803e24b284173354cc3e44d07725 upstream.

clang static analysis flags this error

drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
                kfree(rdev->pm.dpm.ps[i].ps_priv);
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
        kfree(rdev->pm.dpm.ps);
        ^~~~~~~~~~~~~~~~~~~~~~

problem is reported in ci_dpm_fini, with these code blocks.

for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);

The first free happens in ci_parse_power_table where it cleans up locally
on a failure.  ci_dpm_fini also does a cleanup.

ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}

So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.

Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix fatal extent_buffer readahead vs releasepage race

commit 6bf9cd2eed9aee6d742bb9296c994a91f5316949 upstream.

Under somewhat convoluted conditions, it is possible to attempt to
release an extent_buffer that is under io, which triggers a BUG_ON in
btrfs_release_extent_buffer_pages.

This relies on a few different factors. First, extent_buffer reads done
as readahead for searching use WAIT_NONE, so they free the local extent
buffer reference while the io is outstanding. However, they should still
be protected by TREE_REF. However, if the system is doing signficant
reclaim, and simultaneously heavily accessing the extent_buffers, it is
possible for releasepage to race with two concurrent readahead attempts
in a way that leaves TREE_REF unset when the readahead extent buffer is
released.

Essentially, if two tasks race to allocate a new extent_buffer, but the
winner who attempts the first io is rebuffed by a page being locked
(likely by the reclaim itself) then the loser will still go ahead with
issuing the readahead. The loser's call to find_extent_buffer must also
race with the reclaim task reading the extent_buffer's refcount as 1 in
a way that allows the reclaim to re-clear the TREE_REF checked by
find_extent_buffer.

The following represents an example execution demonstrating the race:

            CPU0                                                         CPU1                                           CPU2
reada_for_search                                            reada_for_search
  readahead_tree_block                                        readahead_tree_block
    find_create_tree_block                                      find_create_tree_block
      alloc_extent_buffer                                         alloc_extent_buffer
                                                                  find_extent_buffer // not found
                                                                  allocates eb
                                                                  lock pages
                                                                  associate pages to eb
                                                                  insert eb into radix tree
                                                                  set TREE_REF, refs == 2
                                                                  unlock pages
                                                              read_extent_buffer_pages // WAIT_NONE
                                                                not uptodate (brand new eb)
                                                                                                            lock_page
                                                                if !trylock_page
                                                                  goto unlock_exit // not an error
                                                              free_extent_buffer
                                                                release_extent_buffer
                                                                  atomic_dec_and_test refs to 1
        find_extent_buffer // found
                                                                                                            try_release_extent_buffer
                                                                                                              take refs_lock
                                                                                                              reads refs == 1; no io
          atomic_inc_not_zero refs to 2
          mark_buffer_accessed
            check_buffer_tree_ref
              // not STALE, won't take refs_lock
              refs == 2; TREE_REF set // no action
    read_extent_buffer_pages // WAIT_NONE
                                                                                                              clear TREE_REF
                                                                                                              release_extent_buffer
                                                                                                                atomic_dec_and_test refs to 1
                                                                                                                unlock_page
      still not uptodate (CPU1 read failed on trylock_page)
      locks pages
      set io_pages > 0
      submit io
      return
    free_extent_buffer
      release_extent_buffer
        dec refs to 0
        delete from radix tree
        btrfs_release_extent_buffer_pages
          BUG_ON(io_pages > 0)!!!

We observe this at a very low rate in production and were also able to
reproduce it in a test environment by introducing some spurious delays
and by introducing probabilistic trylock_page failures.

To fix it, we apply check_tree_ref at a point where it could not
possibly be unset by a competing task: after io_pages has been
incremented. All the codepaths that clear TREE_REF check for io, so they
would not be able to clear it after this point until the io is done.

Stack trace, for reference:
[1417839.424739] ------------[ cut here ]------------
[1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841!
[1417839.447024] invalid opcode: 0000 [#1] SMP
[1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0
[1417839.517008] Code: ed e9 ...
[1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202
[1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028
[1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0
[1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238
[1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000
[1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90
[1417839.651549] FS:  00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000
[1417839.669810] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0
[1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1417839.731320] Call Trace:
[1417839.737103]  release_extent_buffer+0x39/0x90
[1417839.746913]  read_block_for_search.isra.38+0x2a3/0x370
[1417839.758645]  btrfs_search_slot+0x260/0x9b0
[1417839.768054]  btrfs_lookup_file_extent+0x4a/0x70
[1417839.778427]  btrfs_get_extent+0x15f/0x830
[1417839.787665]  ? submit_extent_page+0xc4/0x1c0
[1417839.797474]  ? __do_readpage+0x299/0x7a0
[1417839.806515]  __do_readpage+0x33b/0x7a0
[1417839.815171]  ? btrfs_releasepage+0x70/0x70
[1417839.824597]  extent_readpages+0x28f/0x400
[1417839.833836]  read_pages+0x6a/0x1c0
[1417839.841729]  ? startup_64+0x2/0x30
[1417839.849624]  __do_page_cache_readahead+0x13c/0x1a0
[1417839.860590]  filemap_fault+0x6c7/0x990
[1417839.869252]  ? xas_load+0x8/0x80
[1417839.876756]  ? xas_find+0x150/0x190
[1417839.884839]  ? filemap_map_pages+0x295/0x3b0
[1417839.894652]  __do_fault+0x32/0x110
[1417839.902540]  __handle_mm_fault+0xacd/0x1000
[1417839.912156]  handle_mm_fault+0xaa/0x1c0
[1417839.921004]  __do_page_fault+0x242/0x4b0
[1417839.930044]  ? page_fault+0x8/0x30
[1417839.937933]  page_fault+0x1e/0x30
[1417839.945631] RIP: 0033:0x33c4bae
[1417839.952927] Code: Bad RIP value.
[1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206
[1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000
[1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
[1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8
[1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79
[1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb"

This reverts commit 5317abc46279d900c7e63cc122682d819da658bd which is
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

It is being reverted upstream, just hasn't made it there yet and is
causing lots of problems.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: bit 8 of non-leaf PDPEs is not reserved

commit 5ecad245de2ae23dc4e2dbece92f8ccfbaed2fa7 upstream.

Bit 8 would be the "global" bit, which does not quite make sense for non-leaf
page table entries.  Intel ignores it; AMD ignores it in PDEs and PDPEs, but
reserves it in PML4Es.

Probably, earlier versions of the AMD manual documented it as reserved in PDPEs
as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it.

Cc: stable@vger.kernel.org
Reported-by: Nadav Amit <namit@vmware.com>
Fixes: a0c0feb57992 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fix definition of PAGE_HYP_DEVICE

commit 68cf617309b5f6f3a651165f49f20af1494753ae upstream.

PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1
pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which
encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are
RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set.

Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits
at EL2.

Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk for MacroSilicon MS2109

commit e337bf19f6af38d5c3fa6d06cd594e0f890ca1ac upstream.

These devices claim to be 96kHz mono, but actually are 48kHz stereo with
swapped channels and unaligned transfers.

Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>