daily update

* readelf.c (slurp_hppa_unwind_table): Don't relocate address twice.

* elf32-hppa.c (elf32_hppa_final_link): Don't sort unwind information
in a relocatable link.
* elf64-hppa.c (elf_hppa_final_link): Likewise.

*** empty log message ***

daily update

    * gdbint.texinfo, stabs.texinfo: Move the @setchapternewpage
        and @settitle directives up to help makeinfo find them.

PR 10876
* defstd.cc (in_segment): Set only_if_ref true for "end".

    * largefile.m4: New file.

2009-11-06  Doug Kwan  <dougkwan@google.com>

* arm.cc (class Reloc_stub): Correct a comment.
(Target_arm::Target_arm): Initialize arm_input_section_map_.
(Target_arm::scan_section_for_stubs): New method declaration.
(Target_arm::do_make_elf_object, Target_arm::do_make_output_section):
Change methods from private to protected.
(Target_arm::do_may_relax): New method definition.
(Target_arm::do_relax, Target_arm::group_sections,
Target_arm::scan_reloc_for_stub,
Target_arm::scan_reloc_section_for_stubs): New method declarations.
(Target_arm::arm_input_section_map_): New data member declaration.
(Target_arm::scan_reloc_for_stub,
Target_arm::scan_reloc_section_for_stubs,
Target_arm::scan_section_for_stubs, Target_arm::group_sections,
Target_arm::do_relax): New method definitions.

*** empty log message ***

2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>

* opcodes/i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
the xop_table.
(get_valid_dis386): Removed unused condition (from cut/n/paste) for
XOP instructions.

* gas/testsuite/gas/i386/x86-64-lwp.s: Updated to also contain
patterns with r[8-15] registers.
* gas/testsuite/gas/i386/x86-64-lwp.d: Same.

daily update

2009-11-06  H.J. Lu  <hongjiu.lu@intel.com>

* doc/c-i386.texi: Move .lwp.

* m68k-tdep.c (m68k_convert_register_p): Correct
messup.

* m68k-tdep.c (m68k_convert_register_p): Compare with
the actual type of fp registers, not one of the possible
values.

2009-11-06  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10912
* ldmain.c (add_DT_NEEDED_for_dynamic): Default to TRUE.

2009-11-06  Kai Tietz  <kai.tietz@onevision.com>

        * pe.em (DEFAULT_PSEUDO_RELOC_VERSION): New macro.
        (gld_XXX_before_parse): Set pseudo-relocation default
        version to DEFAULT_PSEUDO_RELOC_VERSION.
        (gldXXX_handle_option): Likewise.

* configure.ac: Check for (struct stat)::st_mtim
* fileread.cc (File_read::get_mtime): Use st_mtim if available.
* config.in: Regenerate.
* configure: Regenerate.

Checking this in for:  Jonas Maebe  <jonas.maebe@elis.ugent.be>

        Add DWARF attribute value for the "Borland fastcall" calling
        convention.
        * elf/dwarf2.h: Add DW_CC_GNU_borland_fastcall_i386 constant.

    Prevent program output from mix with "^running".

gdb/
* mi/mi-interp.c (mi_on_resume): Output token
and "^running" together, so that nothing else gets
in between.

* config/obj-elf.c (obj_elf_change_section): Remove FIXME from
comment.

* cgen-mem.h (DECLARE_GETT): Don't inline.
(DECLARE_SETT): Ditto.

*** empty log message ***

2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
    Quentin Neill  <quentin.neill@amd.com>

* gas/config/tc-i386.c (cpu_arch): Add CPU_LWP_FLAGS.
(build_vex_prefix): Handle xop09 and xop0a.
(build_modrm_byte): Handle vexlwp.
(md_show_usage): Add lwp.
* gas/doc/c-i386.texi (i386-LWP): New section.

* gas/testsuite/gas/i386/i386.exp: Run x86-64-lwp in 64-bit mode,
run lwp in 32-bit mode.
* gas/testsuite/gas/i386/x86-64-lwp.d: New.
* gas/testsuite/gas/i386/x86-64-lwp.s: New.
* gas/testsuite/gas/i386/lwp.d: New.
* gas/testsuite/gas/i386/lwp.s: New.

* opcodes/i386-dis.c (OP_LWPCB_E): New.
(OP_LWP_E): New.
(OP_LWP_I): New.
(USE_XOP_8F_TABLE): New.
(XOP_8F_TABLE): New.
(REG_XOP_LWPCB): New.
(REG_XOP_LWP): New.
(XOP_09): New.
(XOP_0A): New.
(reg_table): Redirect REG_8F to XOP_8F_TABLE.
Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
(xop_table): New.
(get_valid_dis386): Handle USE_XOP_8F_TABLE.
Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
to access to the vex_table.
(OP_LWPCB_E): New.
(OP_LWP_E): New.
(OP_LWP_I): New.
* opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
(cpu_flags): Add CpuLWP.
(opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
* opcodes/i386-opc.h (CpuLWP): New.
(i386_cpu_flags): Add bit cpulwp.
(VexLWP): New.
(XOP09): New.
(XOP0A): New.
(i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
* opcodes/i386-opc.tbl (llwpcb): Added.
(lwpval): Added.
(lwpins): Added.

* dwarf2read.c (struct dwarf2_cu): Remove ranges_offset and
has_ranges_offset.
(struct partial_die_info): Remove language, has_stmt_list, dirname,
and line_offset.
(dwarf2_build_include_psymtabs): Take a die_info.  Handle a missing
line table.
(dwarf2_get_pc_bounds): Take PST argument.  Pass it
to dwarf2_ranges_read.  Update all callers.
(init_cu_die_reader): Move earlier.
(dwarf2_find_base_address): New function.
(process_psymtab_comp_unit): Rewrite to use a full DIE for the
compilation unit.  Use dwarf2_get_pc_bounds and
dwarf2_find_base_address.
(load_comp_unit): Rewrite to use a full DIE for the compilation unit.
(process_full_comp_unit): Use dwarf2_find_base_address.
(read_partial_die): Remove support for attributes only used
in the compilation unit DIE.
* symfile.c (allocate_psymtab): Make FILENAME const.
(start_psymtab_common): Likewise.
* symfile.h (allocate_psymtab, start_psymtab_common): Update
prototypes.

daily update

* symmisc.c (print_symbol_bcache_statistics): Print filename cache
statistics.
(print_objfile_statistics): Likewise.
* symfile.c (reread_symbols): Initialize filename_cache.
(allocate_symtab): Cache the file name.
(allocate_psymtab): Likewise.
* solib-sunos.c (allocate_rt_common_objfile): Initialize
filename_cache.
* objfiles.h (struct objfile) <filename_cache>: New field.
* objfiles.c (allocate_objfile): Initialize filename_cache.
(free_objfile): Free filename_cache.

* symfile.c (add_psymbol_to_bcache): Make 'psymbol' static again.
Zero the 'value' field.

* amd64-tdep.c (amd64_init_frame_cache): Enhance comment describing
saved_regs.

* top.c (execute_command): Select a frame before checking the current
language.  Only output a message if verbose.

* config/m68k-emc.exp, lib/emc-support.exp,
gdb.trace/gdb_c_test.c: Delete.
* gdb.trace/actions.exp, gdb.trace/backtrace.exp, gdb.trace/circ.exp,
gdb.trace/collection.exp, gdb.trace/deltrace.exp,
gdb.trace/infotrace.exp, gdb.trace/limits.exp, gdb.trace/packetlen.exp,
gdb.trace/passc-dyn.exp, gdb.trace/passcount.exp, gdb.trace/report.exp,
gdb.trace/save-trace.exp, gdb.trace/tfind.exp, gdb.trace/tracecmd.exp,
gdb.trace/while-dyn.exp, gdb.trace/while-stepping.exp: Remove special
casing for m68k-*-elf.

Remove debugging code accidentally included in last commit.

PR 10910
* output.cc (Output_segment::add_output_section): Add missing
return statement.

* symtab.h (SYMBOL_SET_LINKAGE_NAME): Update comment.
* symfile.c (allocate_symtab): Don't use obsavestring on a
constant string.
* stabsread.c (define_symbol): Don't use obsavestring on a
constant string.
* mdebugread.c (parse_type): Don't use obsavestring on a constant
string.
(new_symtab): Likewise.
* elfread.c (elf_symtab_read): Don't use obsavestring on a
constant string.

    * lexsup.c: Rename --add-needed to --copy-dt-needed-entries.
        * ldlang.h (struct lang_input_statement_struct): Rename add_needed
        to add_DT_NEEDED_for_dynamic.  Rename as_needed to
        add_DT_NEEDED_for_regular.
        * ldlang.c: Likewise.
        * ldlang.h: Likewise.
        * ldlang.c: Use the new variable names.
        * ldgram.y: Likewise.
        * emultempl/elf32.em: Likewise.
        * ld.texinfo: Document the renamed option.  Also mention its
        affect on the resolution of dynamic symbols.
        * NEWS: Mention the changed option name.

    * elflink.c (elf_link_add_object_symbols): Improve error
        message generated when a symbol is left unresolved because a
        --no-add-needed command line option has prevented the
        inclusion of the DSO defining it.

    * gas/i386/i386.exp (space1): Move test inside check for x86
        target.

2009-11-05  Kai Tietz  <kai.tietz@onevision.com>

        * dllwrap.c (is_leading_underscore): New variable.
        (cpu_type): New enum type.
        (which_cpu): New variable.
        (usage): Add new options --no-leading-underscore
        and --leading-underscore.
        (long_options): Likewise.
        (OPTION_NO_LEADING_UNDERSCORE): New define.
        (OPTION_LEADING_UNDERSCORE): Likewise.
        (main): Initialize which_host, pass new options
        to dlltool, do underscoring dependent on
        is_leading_underscore, and do '@12' decoration
        only for x86.

PR 10880
* object.h (class Object): Add is_needed and set_is_needed
methods.  Add is_needed_ field.  Make bool fields into bitfields.
* symtab.cc (Symbol_table::set_dynsym_indexes): If a symbol is
defined in a dynamic object and referenced by a regular object,
set is_needed for the dynamic object.
* layout.cc (Layout::finish_dynamic_section): Don't add DT_NEEDED
if the file is marked with as_needed and it is not needed.

[opcodes]
* rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.
* rx-decode.c: Regenerate.
* rx-dis.c (cpen): Remove.

[gas]
* config/rx-parse.y (MVTIPL): Update bit pattern.
(cpen): Remove.

[include/opcode]
* rx.h (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.

[opcodes]
* rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.
* rx-decode.c: Regenerate.
* rx-dis.c (cpen): Remove.

[gas]
* config/rx-parse.y (MVTIPL): Update bit pattern.
(cpen): Remove.

[include/opcode]
* rx.h (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.

*** empty log message ***

* symfile.c (add_psymbol_to_bcache): Don't copy name.  Make
'psymbol' non-static.

daily update

2009-11-04  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/876
* gas/i386/i386.exp: Run space1.

* gas/i386/space1.l: New.
* gas/i386/space1.s: Likewise.

2009-11-04  Kai Tietz  <kai.tietz@onevision.com>

        * emulparams/arm_epoc_pe.sh: Remove ENTRY.
        * emulparams/arm_wince_pe.sh: Likewise.
        * emulparams/i386pe.sh: Likewise.
        * emulparams/i386pe_posix.sh: Likewise.
        * emulparams/mcorepe.sh: Likewise.
        * emulparams/mipspe.sh: Likewise.
        * emulparams/ppcpe.sh: Likewise.
        * emulparams/armpe.sh: Likewise.
        * emulparams/i386pep.sh: Likewise.
        * emulparams/shpe.sh: Likewise.
        Additionally cleaned up double-defined
        variables SUBSYSTEM and INITIAL_SYMBOL_CHAR.
        * emultempl/pe.em: Remove use of ENTRY.
        (pe_subsystem): New local variable.
        (gld_XXX_before_parse): Don't set default
        entry point here.
        (set_entry_point): New function to set entry
        point.
        (set_pe_subsystem): Remove code for entry point.
        (gld_XXX_after_parse): Use set_entry_point here.
        * emultempl/pep.em: Likewise.

PR 10887
* arm.cc (Target_arm::do_finalize_sections): Don't add dynamic
tags if data is discarded by linker script.
* i386.cc (Target_i386::do_finalize_sections): Likewise.
* powerpc.cc (Target_powerpc::do_finalize_sections): Likewise.
* sparc.cc (Target_sparc::do_finalize_sections): Likewise.
* x86_64.cc (Target_x86_64::do_finalize_sections): Likewise.

* layout.cc (Layout::get_output_section): Add is_interp and
is_dynamic_linker_section parameters.  Change all callers.
(Layout::choose_output_section): Likewise.
(Layout::make_output_section): Likewise.
(Layout::add_output_section_data): Add is_dynamic_linker_section
parameter.  Change all callers.
* layout.h (class Layout): Update declarations.
* output.h (class Output_section): Add is_interp, set_is_interp,
is_dynamic_linker_section, set_is_dynamic_linker_section methods.
Add is_interp_, is_dynamic_linker_section_ fields.  Change
generate_code_fills_at_write_ to a bitfield.
* output.cc (Output_section::Output_sections): Initialize new
fields.
(Output_segment::add_output_section): Add do_sort parameter.
Change all callers.

Fix ChangeLog typo.

2009-11-04  Daniel Jacobowitz  <dan@codesourcery.com>
    Maxim Kuvyrkov  <maxim@codesourcery.com>

* config/tc-m68k.h (CF_DIFF_EXPR_OK): Define to 0 for uClinux.
(CFI_DIFF_LSDA_OK): Define.
* config/te-uclinux.h: New file.
* configure.tgt (m68k-uclinux): Define em.
* dw2gencfi.c (CFI_DIFF_LSDA_OK): New macro.
(dot_cfi_lsda, output_fde): Use instead of CFI_DIFF_EXPR_OK.

* m32c-desc.c: Regenerate.
* mep-desc.c: Regenerate.

* arch.c: Regenerate.
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* model.c: Regenerate.
* sem-switch.c: Regenerate.
* sem.c: Regenerate.

* arch.c: Regenerate.
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* model.c: Regenerate.
* sem-switch.c: Regenerate.
* sem.c: Regenerate.

* arch.c: Regenerate.
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpu2.c: Regenerate.
* cpu2.h: Regenerate.
* cpuall.h: Regenerate.
* cpux.c: Regenerate.
* cpux.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* decode2.c: Regenerate.
* decode2.h: Regenerate.
* decodex.c: Regenerate.
* decodex.h: Regenerate.
* model.c: Regenerate.
* model2.c: Regenerate.
* modelx.c: Regenerate.
* sem-switch.c: Regenerate.
* sem.c: Regenerate.
* sem2-switch.c: Regenerate.
* semx-switch.c: Regenerate.

* Makefile.in (mloop.c): Add @true to rule.
(mloopx.c, mloop2.c): Ditto.
(stamp-*): Add Makefile dependency.
(arch.c, arch.h, cpuall.h): Specify full path.
(cpu.h, sem.c, sem-switch.c, model.c, decode.c, decode.h): Ditto.
(cpux.h, semx-switch.c, modelx.c, decodex.c, decodex.h): Ditto.
(cpu2.h, sem2-switch.c, model2.c, decode2.c, decode2.h): Ditto.

* arch.c: Regenerate.
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode-compact.c: Regenerate.
* decode-compact.h: Regenerate.
* decode-media.c: Regenerate.
* decode-media.h: Regenerate.
* defs-compact.h: Regenerate.
* defs-media.h: Regenerate.
* sem-compact-switch.c: Regenerate.
* sem-compact.c: Regenerate.
* sem-media-switch.c: Regenerate.
* sem-media.c: Regenerate.
* sh-desc.c: Regenerate.
* sh-opc.h: Regenerate.

* arch.c: Regenerate.
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* model.c: Regenerate.
* sem.c: Regenerate.

PR 10860
* options.h (class General_options): Add --warn-common.
* resolve.cc (Symbol_table::resolve): Handle --warn-common when
merging two common symbols.
(Symbol_table::should_override): Handle --warn-common when merging
a common symbol with a defined symbol.  Use report_resolve_problem
for multiple definitions.
(Symbol_table::report_resolve_problem): New function.
* symtab.h (class Symbol_table): Declare report_resolve_problem.

*** empty log message ***

daily update

2009-11-03  Doug Kwan  <dougkwan@google.com>

* arm.cc (Target_arm::Target_arm): Initialize stub_tables_ and
stub_factory_.
(Target_arm::stub_factory): New method definition.
(Target_arm::new_arm_input_section,
Target_arm::find_arm_input_section, Target_arm::new_stub_table,
Target_arm::reloc_uses_thumb_bit): New method declarations.
(Target_arm::Stub_table_list, Target_arm::Arm_input_section_map):
New type definitions.
(Target_arm::stub_tables_, Target_arm::stub_factory_): New data
member declarations.
(Target_arm::reloc_uses_thumb_bit, Target_arm::new_arm_input_section,
Target_arm::find_arm_input_section, Target_arm::new_stub_table):
New method definitions.

2009-11-03  Paul Pluzhnikov  <ppluzhnikov@google.com>

* linux-thread-db.c (disable_thread_event_reporting): Adjust.

* Makefile.in (SIM_EXTRA_DEPS): Add sh-desc.h sh-opc.h.
(sh-desc.o): New rule.
(sh-desc.h,sh-desc.c,sh-opc.h): Replaces rule for desc.h.
(all generated file rules): Specify generated file with full path.

* gdb.arch/i386-gnu-cfi.exp: Define SYMBOL_PREFIX on *-*-mingw*.
* gdb.arch/i386-prologue.exp: Likewise.
* gdb.arch/i386-unwind.exp: Likewise.

* options.h (class General_options): Add --warn_constructors.

PR 10893
* defstd.cc (in_section): Add entries for __rel_iplt_start,
__rel_iplt_end, __rela_iplt_start, __rela_iplt_end, and __stack.

PR 10895
* po/Make-in ($(srcdir)/$(PACKAGE).pot): Pass -C and
--msgid-bugs-address.
(install-pdf): New target.
(install-data_yes): Look up one directory to find mkinstalldirs.

* elfcpp.h: Remove trailing commas from enum definitions.

2009-11-03  H.J. Lu  <hongjiu.lu@intel.com>

* po/Make-in (.po.gmo): Don't generate .gmo files in source
tree.

    * MAINTAINERS (Responsible Maintainers): Add Tristan Gingold as
        maintainer of the avr target.

2009-11-03  Alan Modra  <amodra@bigpond.net.au>
    Ulrich Weigand  <uweigand@de.ibm.com>

* elf32-spu.c (mark_functions_via_relocs): Handle non-branch relocs
(jump tables or other references to code labels) as well.

2009-11-03  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (do_vfp_nsyn_mla_mls): Fix vmls excoding.

gas/testsuite/
* gas/arm/vfp-neon-syntax.d: Update expected results.
* gas/arm/vfp-neon-syntax_t2.d: Update expected results.

* configure.ac (i[34567]86-*): Check if we're targetting x86-64
with an i686 compiler.
* configure.srv (i[34567]86-*-linux*): Pull in x86-64 handling if
needed.
* configure: Rebuilt.

*** empty log message ***

daily update

* lib/gdb.exp (gdb_expect): Fix timeout typo.

* elfread.c (elf_symfile_segments): Do not warn about
uninitialized sections outside of load segments.

* gdb.base/opaque.exp: Remove duplicate tests and xyz from test name.

* gdb.cp/ctti.exp: Correct return values for unsigned char functions.

gdb/
* symfile.c (build_id_to_debug_filename): New variable debugdir.  Move
variables size, s and data into a new inner block.  Change xmalloc for
alloca, use direct BUILDID->SIZE there now.  Loop for the
DEBUG_FILE_DIRECTORY components.
(find_separate_debug_file): New variable debugdir and debugdir_end.
Loop for the DEBUG_FILE_DIRECTORY components.
(_initialize_symfile): For "debug-file-directory" use plural and note
one can use multiple components now.

gdb/doc/
* gdb.texinfo (set debug-file-directory, show debug-file-directory)
(Auto-loading): Use plural and note one can use multiple components now.

gdb/testsuite/
* gdb.base/sepdebug.exp: New test_different_dir call for multiple-dirs.

gdb/
* symfile.c (find_separate_debug_file): Initialize dir, debugfile and
canon_name to NULL.  Change alloca to xmalloc, newly call xfree for it.
New label cleanup_return_debugfile, jump to it from the failure paths.

gdb/
* symfile.c (separate_debug_file_exists): When the CRCs mismatch
print a warning.
(find_separate_debug_file): Pass in the objfile's name.

gdb/testsuite/
* gdb.base/sepdebug.exp (CRC mismatch is reported): New test.
* gdb.base/sepdebug2.c: New file.

gdb/
Remove INVALID_ENTRY_POINT.
* frame.c (inside_entry_func): New variable entry_point.  Return 0 if
the entry point is not known.
* solib-irix.c (enable_break): Likewise.
* objfiles.c (init_entry_point_info): Stop using INVALID_ENTRY_POINT.
Initialize EI.ENTRY_POINT_P.
(entry_point_address): Rename to ...
(entry_point_address_query): ... a new function.  Use EI.ENTRY_POINT_P.
(entry_point_address): New function.
(objfile_relocate): Use EI.ENTRY_POINT_P.
* objfiles.h (struct entry_info): Simplify entry_point comment.  New
field entry_point_p.
(INVALID_ENTRY_POINT): Remove.
(entry_point_address_query): New prototype.
* solib-frv.c (enable_break): Check for NULL SYMFILE_OBJFILE and its
EI.ENTRY_POINT_P.  Return 0 if ".interp" is not found.

2009-11-02  Paul Brook  <paul@codesourcery.com>

ld/testsuite/
* ld-arm/arm-elf.exp: Add new attr-merge-vfp tests.
* ld-arm/attr-merge-vfp-1.d: New test.
* ld-arm/attr-merge-vfp-1r.d: New test.
* ld-arm/attr-merge-vfp-2.d: New test.
* ld-arm/attr-merge-vfp-2r.d: New test.
* ld-arm/attr-merge-vfp-3.d: New test.
* ld-arm/attr-merge-vfp-3r.d: New test.
* ld-arm/attr-merge-vfp-4.d: New test.
* ld-arm/attr-merge-vfp-4r.d: New test.
* ld-arm/attr-merge-vfp-5.d: New test.
* ld-arm/attr-merge-vfp-5r.d: New test.
* ld-arm/attr-merge-vfp-2.s: New test.
* ld-arm/attr-merge-vfp-3.s: New test.
* ld-arm/attr-merge-vfp-3-d16.s: New test.
* ld-arm/attr-merge-vfp-4.s: New test.
* ld-arm/attr-merge-vfp-4-d16.s: New test.

gas/
* doc/c-arm.texi: Document new -mfpu options.
* config/tc-arm.c (fpu_vfp_ext_v3xd, fpu_vfp_fp16, fpu_neon_ext_fma,
fpu_vfp_ext_fma): New.
(NEON_ENC_TAB): Add vfma, vfms, vfnma and vfnms.
(do_vfp_nsyn_fma_fms, do_neon_fmac): New functions.
(insns): Move double precision load/store.  Split out double
precision VFPv3 instrucitons.  Add VFPv4 instructions.
(arm_fpus): Add VFPv3-FP16, VFPv3xD and VFPv4 variants.
(aeabi_set_public_attributes): Set VFPv4 variants

gas/testsuite/
* gas/arm/attr-mfpu-vfpv4.d: New test.
* gas/arm/attr-mfpu-vfpv4-d16.d: New test.
* gas/arm/neon-fma-cov.d: New test.
* gas/arm/neon-fma-cov.s: New test.
* gas/arm/vfp-fma-inc.s: New test.
* gas/arm/vfp-fma-arm.d: New test.
* gas/arm/vfp-fma-arm.s: New test.
* gas/arm/vfp-fma-thumb.d: New test.
* gas/arm/vfp-fma-thumb.s: New test.
* gas/arm/vfma1.d: New test.
* gas/arm/vfma1.s: New test.
* gas/arm/vfpv3xd.d: New test.
* gas/arm/vfpv3xd.s: New test.

include/opcode/
* arm.h (FPU_VFP_EXT_V3xD, FPU_VFP_EXT_FP16, FPU_NEON_EXT_FMA,
FPU_VFP_EXT_FMA, FPU_VFP_V3xD, FPU_VFP_V4D16, FPU_VFP_V4): Define.
(FPU_ARCH_VFP_V3D16_FP16, FPU_ARCH_VFP_V3_FP16, FPU_ARCH_VFP_V3xD,
FPU_ARCH_VFP_V3xD_FP16, FPU_ARCH_VFP_V4, FPU_ARCH_VFP_V4D16,
FPU_ARCH_NEON_VFP_V4): Define.

binutils/
* readelf.c (arm_attr_tag_VFP_arch): Add VFPv4 and VFPv4-D16.

bfd/
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle VFPv4
attributes.

opcodes/
* arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
Add VFPv4 instructions.

missed from last commit

* ecoff.c (ecoff_symbol_clone_hook): New function.
* ecoff.h (ecoff_symbol_clone_hook): Declare.
* obj.h (struct format_ops): Add symbol_clone_hook.
* config/obj-aout.c (aout_format_ops): Init new field.
* config/obj-coff.c (coff_format_ops): Likewise.
* config/obj-ecoff.c (ecoff_format_ops): Likewise.
* config/obj-elf.c (elf_format_ops): Likewise.
* config/obj-ecoff.h (obj_symbol_clone_hook): Define.
* config/obj-multi.h (obj_symbol_clone_hook): Define.

* elflink.c (elf_link_add_object_symbols): Don't force debug
symbols local.

* ld-scripts/phdrs3.exp (LDFLAGS): Add "--local-store 0:0" for SPU.

* messages.c (as_fatal): Apply 2001-01-15 change and followup
to second copy of function.

*** empty log message ***

daily update

2009-11-01  Michael Snyder  <msnyder@vmware.com>

* NEWS (New Commands): Mention record save/restore.

* gdb.texinfo (GDB/MI Stack Manipulation): Make
-stack-list-arguments have the same documentation for parameter
as -stack-list-locals. Add comas.

*** empty log message ***

daily update

2009-10-31  Michael Snyder  <msnyder@vmware.com>

* breakpoint.c (bpstat_stop_status): Fix broken comment.

* record.c (record_restore, cmd_record_save): Debug output goes to
gdb_stdlog.

Fixing the date format for the last ChangeLog entry.

gdb/ChangeLog:

2009-31-10  Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>

* breakpoint.c (catch_syscall_split_args): Remove unecessary warning
displayed when the user provided a syscall name and there is no
XML support.
* xml-syscall.c: Renamed `_sysinfo' to `sysinfo'.
(set_xml_syscall_file_name): Remove syscall_warn_user.
(xml_init_syscalls_info): Remove warning.
(init_sysinfo): Update warnings.

gdb/testsuite/ChangeLog:

2009-31-10  Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>

* gdb.base/catch-syscall.exp: Adapt the testcase in order to accept
the modified warnings for catch syscall.  Verify if GDB was compiled
with support for lib expat, and choose which tests to run depending
on this.

2009-10-30  Doug Kwan  <dougkwan@google.com>

* arm.cc (Stub_addend_reader): Fix bug in previouls check-in.