Merge tag 'drm-intel-gt-next-2022-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver uAPI changes:
- All related to the Small BAR support: (and all by Matt Auld)
 * add probed_cpu_visible_size
 * expose the avail memory region tracking
 * apply ALLOC_GPU only by default
 * add NEEDS_CPU_ACCESS hint
 * tweak error capture on recoverable contexts

Driver highlights:
- Add Small BAR support (Matt)
- Add MeteorLake support (RK)
- Add support for LMEM PCIe resizable BAR (Akeem)

Driver important fixes:
- ttm related fixes (Matt Auld)
- Fix a performance regression related to waitboost (Chris)
- Fix GT resets (Chris)

Driver others:
- Adding GuC SLPC selftest (Vinay)
- Fix ADL-N GuC load (Daniele)
- Add platform workaround (Gustavo, Matt Roper)
- DG2 and ATS-M device ID updates (Matt Roper)
- Add VM_BIND doc rfc with uAPI documentation (Niranjana)
- Fix user-after-free in vma destruction (Thomas)
- Async flush of GuC log regions (Alan)
- Fixes in selftests (Chris, Dan, Andrzej)
- Convert to drm_dbg (Umesh)
- Disable OA sseu config param for newer hardware (Umesh)
- Multi-cast register steering changes (Matt Roper)
- Add lmem_bar_size modparam (Priyanka)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ys85pcMYLkqF/HtB@intel.com

Merge tag 'drm-misc-next-fixes-2022-07-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * amdgpu: Fix for drm buddy memory corruption
 * nouveau: PM fixes; DP fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Ytj65+PdAJs4jIEO@linux-uq9g

Merge tag 'du-next-20220707' of git://linuxtv.org/pinchartl/media into drm-next

Miscellaneous R-Car DU fixes and enhancements

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YtIEWkE0nk/8nhUc@pendragon.ideasonboard.com

drm/amdgpu: Fix for drm buddy memory corruption

User reported gpu page fault when running graphics applications
and in some cases garbaged graphics are observed as soon as X
starts. This patch fixes all the issues.

Fixed the typecast issue for fpfn and lpfn variables, thus
preventing the overflow problem which resolves the memory
corruption.

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714101214.7620-1-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

Merge tag 'drm-misc-next-fixes-2022-07-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes:

 - dma-buf: revert change to fence handling
 - mgag200: fix PCI register initialization

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YtAjgcWC1zkNOGWa@linux-uq9g

Merge tag 'amd-drm-next-5.20-2022-07-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.20-2022-07-14:

amdgpu:
- DCN3.2 updates
- DC SubVP support
- DP MST fixes
- Audio fixes
- DC code cleanup
- SMU13 updates
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11
- Soft reset for SDMA 6
- Add gfxoff status query for vangogh
- Improve BO domain pinning
- Fix timestamps for cursor only commits
- MES fixes
- DCN 3.1.4 support
- Misc fixes
- Misc code cleanup

amdkfd:
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
- fix possible list corruption on queue failure

radeon:
- Fix bogus power of two warning

UAPI:
- Unified memory for CWSR save/restore area for KFD
  Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com

drm/nouveau: Don't pm_runtime_put_sync(), only pm_runtime_put_autosuspend()

While trying to fix another issue, it occurred to me that I don't actually
think there is any situation where we want pm_runtime_put() in nouveau to
be synchronous. In fact, this kind of just seems like it would cause
issues where we may unexpectedly block a thread we don't expect to be
blocked.

So, let's only use pm_runtime_put_autosuspend().

Changes since v1:
* Use pm_runtime_put_autosuspend(), not pm_runtime_put()

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: 3a6536c51d5d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-3-lyude@redhat.com

drm/nouveau/acpi: Don't print error when we get -EINPROGRESS from pm_runtime

Since this isn't actually a failure.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: 79e765ad665d ("drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early")
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-2-lyude@redhat.com

drm/nouveau/kms: Fix failure path for creating DP connectors

It looks like that when we moved nouveau over to using drm_dp_aux_init()
and registering it's aux bus during late connector registration, we totally
forgot to fix the failure codepath in nouveau_connector_create() - as it
still seems to assume that drm_dp_aux_init() can fail (it can't).

So, let's fix that and also add a missing check to ensure that we've
properly allocated nv_connector->aux.name while we're at it.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: fd43ad9d47e7 ("drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister")
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20220526204313.656473-1-lyude@redhat.com

drm/mgag200: Don't read-back PCI option register before writing

Remove the read operation from mgag200_init_pci_options(). It was
incorrectly added while refactoring the code. Reading the PCI option
register clears the register's new value and subsequently leads to
re-writing the old value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: ce19021fd99a ("drm/mgag200: Move PCI-option setup into model-specific code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220708072114.13960-1-tzimmermann@suse.de

dma-buf: revert "return only unsignaled fences in dma_fence_unwrap_for_each v3"

This reverts commit 8f61973718485f3e89bc4f408f929048b7b47c83.

It turned out that this is not correct. Especially the sync_file info
IOCTL needs to see even signaled fences to correctly report back their
status to userspace.

Instead add the filter in the merge function again where it makes sense.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712102849.1562-1-christian.koenig@amd.com

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/amd/display: remove duplicate dcn314 includes

Several headers were included twice.  Fix that.

Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCN314 in DM

Add support for DCN 3.1.4 in Display Manager

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DMUB support for DCN314

Initialize DMUB for DCN 3.1.4.
Use same funcs as DCN31.

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCN314 in DC

Add support for DCN 3.1.4 in Display Core

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 version identifiers

DCN 3.1.4 version and family ids

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 DML calculation support

Display mode library for DCN 3.1.4

v2: squash in checkpatch fix (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 DC resources

Display Core support for DCN 3.1.4

v2:(squash)fix non-x86 in dc/dcn314/Makefile
Properly handle PPC as well. (Alex)
v3: minor cleanup (Alex)
v4: fix comment (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 clock manager

Clock and SMU interfaces for DCN 3.1.4

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 IRQ services

IRQ services to support DCN 3.1.4 interrupts.

v2: make to_dal_irq_source_dcn314 static (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add reg headers for DCN314

Register headers for the following IPs:
- DCN  3.1.4
- DPCS 3.1.4

v2:(squash) clean up (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ensure valid event timestamp for cursor-only commits

Requires enabling the vblank machinery for them.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2030
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Check BO's requested pinning domains against its preferred_domains

When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.

For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.

v2: Allow the kernel to override the domain, which can happen when
    exporting a BO to a V4L camera (for example).

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915: Add lmem_bar_size modparam

For testing purposes, support forcing the lmem_bar_size through a new
modparam. In CI we only have a limited number of configurations for DG2,
but we still need to be reasonably sure we get a usable device (also
verifying we report the correct values for things like
probed_cpu_visible_size etc) with all the potential lmem_bar sizes that
we might expect see in the wild.

v2: Update commit message and a minor modification.(Matt)

v3: Optimised lmem bar size code and modified code to resize
bar maximum upto lmem_size instead of maximum supported size.(Nirmoy)

v4: Optimised lmem bar size code.(Nirmoy)

Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713130209.2573233-3-priyanka.dandamudi@intel.com

drm/i915: Add support for LMEM PCIe resizable bar

Add support for the local memory PICe resizable bar, so that
local memory can be resized to the maximum size supported by the device,
and mapped correctly to the PCIe memory bar. It is usual that GPU
devices expose only 256MB BARs primarily to be compatible with 32-bit
systems. So, those devices cannot claim larger memory BAR windows size due
to the system BIOS limitation. With this change, it would be possible to
reprogram the windows of the bridge directly above the requesting device
on the same BAR type.

v2:Moved code to gt/intel_region_lmem.c and used only
single underscore for function names.(Jani)

v3: Optimised code.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Michael J Ruhl <michael.j.ruhl@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713130209.2573233-2-priyanka.dandamudi@intel.com

drm/i915: Correct ss -> steering calculation for pre-Xe_HP platforms

Accidental use of a "SLICE" macro where a "SUBSLICE" macro was intended
causes the group ID for steering to be calculated incorrectly on
pre-Xe_HP platforms.

Fixes: 9a92732f040a ("drm/i915/gt: Add general DSS steering iterator to intel_gt_mcr")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712220513.3451794-1-matthew.d.roper@intel.com

drm/amd/display: attempt to fix the logic in commit_planes_for_stream()

The indentation is screwed up.  I'm not sure quite how the logic
should flow.  Someone more familiar with this code should
verify this.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Implement get GFXOFF status for vangogh

Implement function to get current GFXOFF status for vangogh.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct check of coverage blend mode

Check the value of per_pixel_alpha to decide whether the Coverage pixel
blend mode is applicable or not.

Fixes: 76818cdd11a2 ("drm/amd/display: add Coverage blend mode for overlay plane")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Prevent divide by zero

divide error: 0000 [#1] SMP PTI
CPU: 3 PID: 78925 Comm: tee Not tainted 5.15.50-1-lts #1
Hardware name: MSI MS-7A59/Z270 SLI PLUS (MS-7A59), BIOS 1.90 01/30/2018
RIP: 0010:smu_v11_0_set_fan_speed_rpm+0x11/0x110 [amdgpu]

Speed is user-configurable through a file.
I accidentally set it to zero, and the driver crashed.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Yefim Barashkin <mr.b34r@kolabnow.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.

Various DCE versions had trouble with 36 bpp lb depth, requiring fixes,
last time in commit 353ca0fa5630 ("drm/amd/display: Fix 10bit 4K display
on CIK GPUs") for DCE-8. So far >= DCE-11.2 was considered ok, but now I
found out that on DCE-11.2 it causes dithering when there shouldn't be
any, so identity pixel passthrough with identity gamma LUTs doesn't work
when it should. This breaks various important neuroscience applications,
as reported to me by scientific users of Polaris cards under Ubuntu 22.04
with Linux 5.15, and confirmed by testing it myself on DCE-11.2.

Lets only use depth 36 for DCN engines, where my testing showed that it
is both necessary for high color precision output, e.g., RGBA16 fb's,
and not harmful, as far as more than one year in real-world use showed.

DCE engines seem to work fine for high precision output at 30 bpp, so
this ("famous last words") depth 30 should hopefully fix all known problems
without introducing new ones.

Successfully retested on DCE-11.2 Polaris and DCN-1.0 Raven Ridge on
top of Linux 5.19.0-rc2 + drm-next.

Fixes: 353ca0fa5630 ("drm/amd/display: Fix 10bit 4K display on CIK GPUs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # 5.14.0
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some dc_dmub_srv functions static

Not used outside of dc_dmub_srv.c.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix file permissions on some files

Drop execute.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2085
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix acronym typo in glossary

The initialism of RunList Controller is RLC, not RCL

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.194

This version brings along following fixes:

- Fixes for MST, MPO, PSRSU, DP 2.0, Freesync and others
- Add register offsets of NBI and DCN.
- Improvement of ALPM
- Removing assert statement for Linux DM
- Re-implementing ARGB16161616 pixel format

Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix lag when moving windowed MPO across display using ODM 2:1 combine

[Why]
With single display odm 2:1 policy, when moving windowed MPO across
 the display, we experience a momentary lag when we move between the
 centre of the display and the right half of the display.  This is
 caused by the MPO pipe being reallocated when it crosses this
 boundary

[How]
Handle two cases:
1. if the head pipe has a MPO pipe already allocated in the old
 context, then use that pipe if it is available in the current
 context
2. if the head pipe is on the left side, check the right side to
 see if it has a MPO pipe already allocated.  If so, don't use
 that pipe if it is selected as the idle pipe in the current
 context
Add new function pointer called .acquire_idle_pipe_for_head_pipe
 that will pass in the head pipe and handle case 1
Add find_idle_secondary_pipe_check_mpo() to handle case 2
 if we don't hit case 1.

In dc_add_plane_to_context(), start with head pipe and check
 case 1 and 2 in call acquire_free_pipe_for_head().
If we are on the right side of the display, check case 1
 again by passing in right side pipe as the new head in
 call acquire_free_pipe_for_head().

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NBIO reg offsets to DC

[Why&How]
Add a field to store the NBIO IP offset for use with runtime offset
calculation

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN reg offsets to DC

[Why&How]
Add a field to store the DCN IP offset for use with runtime offset
calculation

This offset is indexed using reg*_BASE_IDX for the corresponding
group of registers. For example, address of DIG_BE_CNTL instance 0 is
calculated like: dcn_reg_offsets[regDIG0_DIG_BE_CNTL_BASE_IDX] +
regDIG0_DIG_BE_CNTL.

{dcn,nbio}_reg_offsets are used only for the ASICs for which runtime
initializaion of offsets are enabled through the modified SR* macros
that contain an additional REG_STRUCT element in the macro definition.

DCN3.5+ will fail dc_create() if {dcn,nbio}_reg_offsets are null. They
are applicable starting with DCN32/321 and are not used for ASICs
upstreamed before them. ASICs before DCN32/321 will not contain any
computation that involves {dcn,nbio}_reg_offsets. For them, the
address/offset computation is done during compile time.

This is evident from the BASE_INNER definition for compile time vs run
time initialization:

Compile time init: #define BASE_INNER(seg) DCN_BASE__INST0_SEG ## seg
Run time init:     #define BASE_INNER(seg) ctx->dcn_reg_offsets[seg]

BASE_INNER macro is local to each dcnxx_resource.c and hence different
ASICs can have either runtime or compile time initialization of offsets.

The computation of offset is done for registers all at once during
driver load and hence it does not introduce any performance overhead
during normal operation.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add system info table log

[why]
insert log for debug use.

v2: squash in fix (Alex)

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Grab dc_lock before detecting link

[Why & How]
There is chance we change dc state while calling dc_link_detect().
As the result of that, grab the dm.dc_lock before detecting link.

Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Re-implementing ARGB16161616 pixel format as 22

[Why]
ABGR16161616 colour format was added to dcn10/20/30, and set
any ARGB16161616 to the same value as it (26). As such, the
HDR10 Green Point y value was too far off of the EDID stated
value for DisplayPort.

[How]
Added back the pixel format as 22 for ARGB16161616 for
dcn10/20/30.

Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.193

Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update DML1 logic for unbounded req handling

[why]
Unbounded request logic in resource/DML has some issues where
unbounded request is being enabled incorrectly.  SW today enables
unbounded request unconditionally in hardware, on the assumption
that HW can always support it in single pipe scenarios.

This worked until now because the same assumption is made in DML.
A new DML update is needed to fix a bug, where there are single
pipe scenarios where unbounded cannot be enabled, and this change
in DML needs to be ported in, and dcn32 resource logic fixed.

[how]
First, dcn32_resource should program unbounded req in HW according
to unbounded req enablement output from DML, as opposed to DML input

Second, port in DML1 update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: add aggregated doorbell support

Port aggregated doorbell support to gfx11.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma6: add aggregated doorbell support

Port aggregated doorbell support to sdma6.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: ring aggregatged doorbell when mes queue is unmapped

Ring aggregated doorbel to make unmapped queue scheduled in mes firmware.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes11: initialize aggregated doorbell

Allocate and enable aggregated doorbell.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: init aggregated doorbell

Allocate and enable aggregated doorbell.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support reset flag set for gpu reset

Move reset_context out of gpu recover function to make it configurable
for different reset purpose.
For the reset way of call gpu_recovery sysfs, force to use full reset
method. Otherwise, try soft reset by default if the related ASIC
supportted, if soft reset failed, will use full reset.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support SDMA soft recovery for sdma v6

Support SDMA soft reset for SDMA v6.

V3: use ib test to check soft reset.
V4: squash in unused variable fix (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable soft reset for gfx 11

Enable soft reset for gfx 11.
V2: enable both gfx v11.0.0 and gfx v11.0.2.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support gfx soft reset for gfx v11

Support GFX soft reset for gfx v11.

V3: use ib test check soft reset.
V4: squash in unused variable fix (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce SCDC Status Flags Definition

[Why]
Status flags definition is reduced to read
less bytes in SCDC transaction for status update.

[How]
Reduce definition of reserved bytes from 3 to 1
for status update.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7

On the GC 10.3.7 platform the initial MEC release version #3 can support
atomic operation,so need correct and set its MEC atomic support version to #3.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make enable link independent from verified link caps

[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.

[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ignore First MST Sideband Message Return Error

[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.

[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.

v2: squash in additional DMI entries
v3: squash in static fix

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/ttm: fix 32b build

Since segment_pages is no longer a compile time constant, it looks the
DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest
is just to use the ULL variant, but really we should need not need more
than u32 for the page alignment (also we are limited by that due to the
sg->length type), so also make it all u32.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bc99f1209f19 ("drm/i915/ttm: fix sg_table construction")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712174050.592550-1-matthew.auld@intel.com

Merge tag 'topic/nouveau-misc-2022-07-13-1' of git://anongit.freedesktop.org/drm/drm into drm-next

drm/nouveau next misc

This is a set of misc nouveau patches skeggsb left queued up, just
flushing some of them out.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9txSS9Pdagpi=3JJeFOGy6ALWC31WZdQxLBkfGeL3O+T1A@mail.gmail.com

Merge tag 'exynos-drm-next-for-v5.20' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Two cleanups
- Remove Joonyoung Shim from MAINTAINERS and relevant yaml files.
  He left from Samsung so his email address isn't valid anymore.

Fixup
- Fix resume function issue of exynos decon driver by calling
  clk_disable_unprepare() properly if clk_prepare_enable() failed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712061008.199961-1-inki.dae@samsung.com

drm/nouveau/kms/nv50-: remove unused functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/flcn: remove unused functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: remove double WFI when destroying channels

This is particularly irritating when the channel has hung.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/ce/gv100-: move method buffer to ce ctx

Didn't really know what this buffer was when initially implemented,
but these days we do, so move it somewhere more appropriate.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/fifo: remove rd32/wr32 accessors from channels

No need for these, we always map USERD to the client.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/fifo: rip out cevent, never used

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/device: remove pwrsrc notify in favour of a direct call to clk

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: remove unused header

Left-over from secboot->acr transition.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: zero out engine pointer for subdev-provided classes

Doesn't fix any known issue, but noticed fifo being initialised in
logs in response to mmu allocation.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: use list_add_tail() when building object tree

Fixes resume from hibernate failing on (at least) TU102, where cursor
channel init failed due to being performed before the core channel.

Not solid idea why suspend-to-ram worked, but, presumably HW being in
an entirely clean state has something to do with it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: rip out event uapi

Userspace never ended up using this to be clever about dealing with
channel death, and it won't be, not like this anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvif: add wrapper for open-coded nvif_object_constructed()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-msm-next-2022-07-10' of https://gitlab.freedesktop.org/drm/msm into drm-next

Next for v5.20

GPU:
- a619 support
- Fix for unclocked GMU register access
- Devcore dump enhancements

Core:

- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings

DPU:

- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes

DP:

- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change

MDP5:

- MSM8953 perf data

HDMI:

- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com

Backmerge tag 'v5.19-rc6' of git://git./linux/kernel/git/torvalds/linux into drm-next

Backmerge in rc6 so I can merge msm next easier.

Linux 5.19-rc6

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915/selftests: fix subtraction overflow bug

On some machines hole_end can be small enough to cause subtraction
overflow. On the other side (addr + 2 * min_alignment) can overflow
in case of mock tests. This patch should handle both cases.

Fixes: e1c5f754067b59 ("drm/i915: Avoid overflow in computing pot_hole loop termination")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3674
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624113528.2159210-1-andrzej.hajda@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gt: Only kick the signal worker if there's been an update

One impact of commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove
dma_resv workaround") is that it stores many, many more fences. Whereas
adding an exclusive fence used to remove the shared fence list, that
list is now preserved and the write fences included into the list. Not
just a single write fence, but now a write/read fence per context. That
causes us to have to track more fences than before (albeit half of those
are redundant), and we trigger more interrupts for multi-engine
workloads.

As part of reducing the impact from handling more signaling, we observe
we only need to kick the signal worker after adding a fence iff we have
good cause to believe that there is work to be done in processing the
fence i.e. we either need to enable the interrupt or the request is
already complete but we don't know if we saw the interrupt and so need
to check signaling.

References: 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d7b953c7a4ba747c8196a164e2f8c5aef468d048.1657289332.git.karolina.drobnik@intel.com

drm/i915: Bump GT idling delay to 2 jiffies

In monitoring a transcode pipeline that is latency sensitive (it waits
between submitting frames, and each frame requires work on rcs/vcs/vecs
engines), it is found that it took longer than a single jiffy for it to
sustain its workload. Allowing an extra jiffy headroom for the userspace
prevents us from prematurely parking and having to exit powersaving
immediately.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e37911ec087a9ce50630d6faf61fa2c0d5f96d44.1657289332.git.karolina.drobnik@intel.com

drm/i915/gem: Look for waitboosting across the whole object prior to individual waits

We employ a "waitboost" heuristic to detect when userspace is stalled
waiting for results from earlier execution. Under latency sensitive work
mixed between the gpu/cpu, the GPU is typically under-utilised and so
RPS sees that low utilisation as a reason to downclock the frequency,
causing longer stalls and lower throughput. The user left waiting for
the results is not impressed.

On applying commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv
workaround") it was observed that deinterlacing h264 on Haswell
performance dropped by 2-5x. The reason being that the natural workload
was not intense enough to trigger RPS (using HW evaluation intervals) to
upclock, and so it was depending on waitboosting for the throughput.

Commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
changes the composition of dma-resv from keeping a single write fence +
multiple read fences, to a single array of multiple write and read
fences (a maximum of one pair of write/read fences per context). The
iteration order was also changed implicitly from all-read fences then
the single write fence, to a mix of write fences followed by read
fences. It is that ordering change that belied the fragility of
waitboosting.

Currently, a waitboost is inspected at the point of waiting on an
outstanding fence. If the GPU is backlogged such that we haven't yet
stated the request we need to wait on, we force the GPU to upclock until
the completion of that request. By changing the order in which we waited
upon requests, we ended up waiting on those requests in sequence and as
such we saw that each request was already started and so not a suitable
candidate for waitboosting.

Instead of asking whether to boost each fence in turn, we can look at
whether boosting is required for the dma-resv ensemble prior to waiting
on any fence, making the heuristic more robust to the order in which
fences are stored in the dma-resv.

Reported-by: Thomas Voegtle <tv@lio96.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Fixes: 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07e05518d9f6620d20cc1101ec1849203fe973f9.1657289332.git.karolina.drobnik@intel.com

drm/i915/gt: Serialize TLB invalidates with GT resets

Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.

Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.

Cc: stable@vger.kernel.org # v4.4 and upper
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org

drm/i915/gt: Serialize GRDOM access between multiple engine resets

Don't allow two engines to be reset in parallel, as they would both
try to select a reset bit (and send requests to common registers)
and wait on that register, at the same time. Serialize control of
the reset requests/acks using the uncore->lock, which will also ensure
that no other GT state changes at the same time as the actual reset.

Cc: stable@vger.kernel.org # v4.4 and upper
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0a2d894e77aed7c2e36b0d1abdc7dbac3011729.1657639152.git.mchehab@kernel.org

drm/amdkfd: bump KFD version for unified ctx save/restore memory

To expose unified memory for ctx save/resotre area feature
availablity to libhsakmt.

Proposed userspace:
https://patchwork.freedesktop.org/series/106218/

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix unnecessary pipe split playing NV12 1080p MPO video

[Why]
When playing NV12 1080p MPO video, it is pipe splitting so
we see two pipes in fullscreen and four pipes in windowed
mode. Pipe split is happening because we are setting
MaximumMPCCombine = 1

[How]
Algorithm for MaximumMPCCombine has extra conditions we do
not need.  Use DCN31 algorithm instead

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix black screen when disabling Freesync in OSD

[Why]
Black screen encountered when disabling Freesync through OSD on some
displays.

[How]
Set the should_disable flag when new top pipe has no plane state to
ensure that pipes get cleaned up.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable PSRSU when DSC enabled on the specific sink

[Why]
Some specific sink is not able to support PSRSU when DSC is turned on.
For this case, fall-back to use PSR1.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear edid when unplug mst connector

[Why]
When unplug one sst monitor from a mst hub and plug in the same
port with another sst monitor, we don't read the corresponding
edid. That's because we detect there is already an edid stored in
aconnector->edid which is a stale one.

[How]
Clean up aconnector->edid when unplug mst connector.

Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix windowed MPO video with ODM combine for DCN32

[Why]
In single display configuration, windowed MPO does not work
 with ODM combine.

[How]
For ODM + MPO window on one half of ODM, only 3 pipes should
 be allocated and scaling parameters adjusted to handle this case.
 Otherwise, we use 4 pipes.
Move copy_surface_update_to_plane() before dc_add_plane_to_context()
 so that it gets the updated rect information when setting up
 the pipes.
Add dc_check_boundary_crossing_for_windowed_mpo_with_odm() to force
 a full update when we cross a boundary requiring us to reconfigure
 the number of pipes between 3 and 4 pipes.
Set config.enable_windowed_mpo_odm to true when we have the
 debug.enable_single_display_2to1_odm_policy set to true.
Don't fail validating ODM with windowed MPO if
 config.enable_windowed_mpo_odm is true.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Removing assert statements for Linux

[WHY]
Assert statements causing several bugs on Linux DM

[HOW]
Removing assert statement for Linux DM
(ASSERT(result == VBIOSSMC_Result_OK)). Also adding
logging statements for setting dcfclk.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216092
Fixes: c1b972a18d05 ("drm/amd/display: Insert pulling smu busy status before sending another request")
Reviewed-by: Gabe Teeger <Gabe.Teeger@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Helper function for ALPM initialization

[WHY]
Needed a helper function for ALPM DPCD initialization

[HOW]
Refactoring to put ALPM initialization in a helper function

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Muhammad Ansari <muansari@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for DP2.0 when checking ODM combine

[WHY]
Certain DP 2.0 modes may fail validation if DP 2.0 is not considered for
ODM combine.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Exit SubVP if MPO in use

[Description]
Exit SubVP if MPO is in use since SubVP + MPO together is not supported.
- Don't add SubVP at validation time if we see MPO is in use

Issues fixed in the SubVP / MPO transition:
1. Enable phantom pipes in post unlock function to prevent underflow
when an active pipe is being transitioned to be a phantom pipe (VTG
updates take place right away). Also must wait for VUPDATE of the main
pipe to complete first

2. Don't wait for MPCC idle when transitioning a phantom pipe to an
actual pipe. MPCC_STATUS is never asserted due to OTG being off for
phantom pipes

3. When transitioning an active pipe to phantom, program DET right away
(same as disabling the pipe) or the DET update will only take when
the phantom pipe is enabled which can cause DET allocation errors.

4. For K1/K2 programming of phantom pipes, use same settings as the
main pipe. Also don't program K1 / K2 = 0xF ever since the field is only
1 / 2 bits wide.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: set correct mes ring ready flag

Set corresponding ready flag for mes ring when enable or disable
mes ring.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove one duplicated ef removal

That has been done in BO release notify.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/dg2: Add Wa_15010599737

This workaround may need to be extended to other platforms soon, but for
now it's marked as DG2-specific.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-1-matthew.d.roper@intel.com

drm/amdgpu/gmc10: adjust gart size for parts that support S/G display

For GMC 10 parts which support scatter/gather display (display
from system memory), we should allocate a larger gart size
to better handler larger displays.  This mirrors what we already
do for GMC 9 parts.

v2: fix typo (Alex)

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: fix bo va unmap issue in mes

Need reserve buffers before unmap mes ctx bo va.

v2: fix removal of dma_resv_excl_fence() (Alex)
v3: fix dma_resv_usage (Alex)

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'mediatek-drm-next-5.20' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.20

1. Add Mediatek Soc DRM (vdosys0) support for mt8195
2. Cooperate with DSI RX devices to modify dsi funcs and delay mipi high to cooperate with panel sequence
3. Add mt8186 dsi compatible and convert dsi_dtbinding to .yaml
4. Add MediaTek SoC DRM (vdosys1) support for mt8195
5. Add MT8195 dp_intf driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix drm_edid.h include]
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220709142021.24260-1-chunkuang.hu@kernel.org

Merge tag 'drm/tegra/for-5.20-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next

drm/tegra: Changes for v5.20-rc1

The bulk of these changes adds support for context isolation for the
various supported host1x engines, as well as support for the hardware
found on the new Tegra234 SoC generation.

There's also a couple of fixes and cleanups. To round things off, the
device tree bindings are converted to the new json-schema format that
allows DTBs to be validated.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708181136.673789-1-thierry.reding@gmail.com

drm/exynos/exynos7_drm_decon: free resources when clk_set_parent() failed.

In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare()
to free resource that have been used.

Fixes: 6f83d20838c09 ("drm/exynos: use DRM_DEV_ERROR to print out error
message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

dt-bindings: remove Joonyoung Shim from maintainers

Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so remove him from maintainers of DT bindings (display,
phy).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: MAINTAINERS: move Joonyoung Shim to credits

Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so move him to credits file.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>