Lu Baolu [Fri, 15 Jan 2021 00:42:02 +0000 (08:42 +0800)]
iommu/vt-d: Preset Access/Dirty bits for IOVA over FL
[ Upstream commit
a8ce9ebbecdfda3322bbcece6b3b25888217f8e3 ]
The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Baolu [Sat, 20 Mar 2021 02:54:11 +0000 (10:54 +0800)]
iommu/vt-d: Report the right page fault address
[ Upstream commit
03d205094af45bca4f8e0498c461a893aa3ec6d9 ]
The Address field of the Page Request Descriptor only keeps bit [63:12]
of the offending address. Convert it to a full address before reporting
it to device drivers.
Fixes:
eb8d93ea3c1d3 ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Baolu [Tue, 30 Mar 2021 02:11:45 +0000 (10:11 +0800)]
iommu/vt-d: Report right snoop capability when using FL for IOVA
[ Upstream commit
6c00612d0cba10f7d0917cf1f73c945003ed4cd7 ]
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.
Fixes:
b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiang Chen [Thu, 25 Mar 2021 03:38:24 +0000 (11:38 +0800)]
iommu: Fix a boundary issue to avoid performance drop
[ Upstream commit
3431c3f660a39f6ced954548a59dba6541ce3eb1 ]
After the change of patch ("iommu: Switch gather->end to the
inclusive end"), the performace drops from 1600+K IOPS to 1200K in our
kunpeng ARM64 platform.
We find that the range [start1, end1) actually is joint from the range
[end1, end2), but it is considered as disjoint after the change,
so it needs more times of TLB sync, and spends more time on it.
So fix the boundary issue to avoid performance drop.
Fixes:
862c3715de8f ("iommu: Switch gather->end to the inclusive end")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1616643504-120688-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Baolu [Sat, 20 Mar 2021 02:41:56 +0000 (10:41 +0800)]
iommu/vt-d: Don't set then clear private data in prq_event_thread()
[ Upstream commit
1d421058c815d54113d9afdf6db3f995c788cf0d ]
The VT-d specification (section 7.6) requires that the value in the
Private Data field of a Page Group Response Descriptor must match
the value in the Private Data field of the respective Page Request
Descriptor.
The private data field of a page group response descriptor is set then
immediately cleared in prq_event_thread(). This breaks the rule defined
by the VT-d specification. Fix it by moving clearing code up.
Fixes:
5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320024156.640798-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Álvaro Fernández Rojas [Sun, 14 Mar 2021 16:43:46 +0000 (17:43 +0100)]
mips: bmips: fix syscon-reboot nodes
[ Upstream commit
cde58b861a1d365568588adda59d42351c0c4ad3 ]
Commit
a23c4134955e added the clock controller nodes, incorrectly changing the
syscon-reboot nodes addresses.
Fixes:
a23c4134955e ("MIPS: BMIPS: add clock controller nodes")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Salil Mehta [Mon, 5 Apr 2021 17:28:25 +0000 (18:28 +0100)]
net: hns3: Limiting the scope of vector_ring_chain variable
[ Upstream commit
d392ecd1bc29ae15b0e284d5f732c2d36f244271 ]
Limiting the scope of the variable vector_ring_chain to the block where it
is used.
Fixes:
424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 2 Apr 2021 11:44:42 +0000 (14:44 +0300)]
nfc: pn533: prevent potential memory corruption
[ Upstream commit
ca4d4c34ae9aa5c3c0da76662c5e549d2fc0cc86 ]
If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:
memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
Fixes:
c3b1e1e8a76f ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Håkon Bugge [Mon, 22 Mar 2021 13:35:32 +0000 (14:35 +0100)]
RDMA/core: Fix corrupted SL on passive side
[ Upstream commit
194f64a3cad3ab9e381e996a13089de3215d1887 ]
On RoCE systems, a CM REQ contains a Primary Hop Limit > 1 and Primary
Subnet Local is zero.
In cm_req_handler(), the cm_process_routed_req() function is called. Since
the Primary Subnet Local value is zero in the request, and since this is
RoCE (Primary Local LID is permissive), the following statement will be
executed:
IBA_SET(CM_REQ_PRIMARY_SL, req_msg, wc->sl);
This corrupts SL in req_msg if it was different from zero. In other words,
a request to setup a connection using an SL != zero, will not be honored,
and a connection using SL zero will be created instead.
Fixed by not calling cm_process_routed_req() on RoCE systems, the
cm_process_route_req() is only for IB anyhow.
Fixes:
3971c9f6dbf2 ("IB/cm: Add interim support for routed paths")
Link: https://lore.kernel.org/r/1616420132-31005-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Scull [Thu, 18 Mar 2021 14:33:07 +0000 (14:33 +0000)]
bug: Remove redundant condition check in report_bug
[ Upstream commit
3ad1a6cb0abc63d036fc866bd7c2c5983516dec5 ]
report_bug() will return early if it cannot find a bug corresponding to
the provided address. The subsequent test for the bug will always be
true so remove it.
Fixes:
1b4cfe3c0a30d ("lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()")
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-2-ascull@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 31 Mar 2021 08:36:02 +0000 (16:36 +0800)]
net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start()
[ Upstream commit
ac1db7acea67777be1ba86e36e058c479eab6508 ]
Add the missing destroy_workqueue() before return from
tipc_crypto_start() in the error handling case.
Fixes:
1ef6f7c9390f ("tipc: add automatic session key exchange")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Tue, 16 Mar 2021 01:09:38 +0000 (12:09 +1100)]
powerpc/pseries: Only register vio drivers if vio bus exists
[ Upstream commit
11d92156f7a862091009d7655d19c1e7de37fc7a ]
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit
4336b9337824 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes:
4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Tue, 30 Mar 2021 10:28:52 +0000 (12:28 +0200)]
udp: never accept GSO_FRAGLIST packets
[ Upstream commit
78352f73dc5047f3f744764cc45912498c52f3c9 ]
Currently the UDP protocol delivers GSO_FRAGLIST packets to
the sockets without the expected segmentation.
This change addresses the issue introducing and maintaining
a couple of new fields to explicitly accept SKB_GSO_UDP_L4
or GSO_FRAGLIST packets. Additionally updates udp_unexpected_gso()
accordingly.
UDP sockets enabling UDP_GRO stil keep accept_udp_fraglist
zeroed.
v1 -> v2:
- use 2 bits instead of a whole GSO bitmask (Willem)
Fixes:
9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Edich [Mon, 29 Mar 2021 09:45:36 +0000 (11:45 +0200)]
net: phy: lan87xx: fix access to wrong register of LAN87xx
[ Upstream commit
fdb5cc6ab3b6a1c0122d3644a63ef9dc7a610d35 ]
The function lan87xx_config_aneg_ext was introduced to configure
LAN95xxA but as well writes to undocumented register of LAN87xx.
This fix prevents that access.
The function lan87xx_config_aneg_ext gets more suitable for the new
behavior name.
Reported-by: Måns Rullgård <mans@mansr.com>
Fixes:
05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia Zhou [Tue, 30 Mar 2021 11:19:23 +0000 (13:19 +0200)]
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
[ Upstream commit
abc21649b3e5c34b143bf86f0c78e33d5815e250 ]
modification in commit
2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.
Fixes:
2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Álvaro Fernández Rojas [Wed, 24 Mar 2021 08:19:02 +0000 (09:19 +0100)]
gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
[ Upstream commit
9c7d24693d864f90b27aad5d15fbfe226c02898b ]
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
isn't enabled.
Fixes:
6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tiezhu Yang [Thu, 25 Mar 2021 12:50:01 +0000 (20:50 +0800)]
MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again
[ Upstream commit
66633abd0642f1e89d26e15f36fb13d3a1c535ff ]
After commit
0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to
archs where they work"), bpf_probe_read{, str}() functions were no longer
available on MIPS, so there exist some errors when running bpf program:
root@linux:/home/loongson/bcc# python examples/tracing/task_switch.py
bpf: Failed to load program: Invalid argument
[...]
11: (85) call bpf_probe_read#4
unknown func bpf_probe_read#4
[...]
Exception: Failed to load BPF program count_sched: Invalid argument
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE should be restricted to archs
with non-overlapping address ranges, but they can overlap in EVA mode
on MIPS, so select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA in
arch/mips/Kconfig, otherwise the bpf old helper bpf_probe_read() will
not be available.
This is similar with the commit
d195b1d1d119 ("powerpc/bpf: Enable
bpf_probe_read{, str}() on powerpc again").
Fixes:
0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Huang [Sat, 27 Mar 2021 09:49:00 +0000 (09:49 +0000)]
powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
[ Upstream commit
4fe529449d85e78972fa327999961ecc83a0b6db ]
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes:
2104180a5369 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Yunlong [Mon, 22 Mar 2021 16:13:25 +0000 (09:13 -0700)]
IB/isert: Fix a use after free in isert_connect_request
[ Upstream commit
adb76a520d068a54ee5ca82e756cf8e5a47363a4 ]
The device is got by isert_device_get() with refcount is 1, and is
assigned to isert_conn by
isert_conn->device = device.
When isert_create_qp() failed, device will be freed with
isert_device_put().
Later, the device is used in isert_free_login_buf(isert_conn) by the
isert_conn->device->ib_device statement.
Free the device in the correct order.
Fixes:
ae9ea9ed38c9 ("iser-target: Split some logic in isert_connect_request to routines")
Link: https://lore.kernel.org/r/20210322161325.7491-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maor Gottlieb [Thu, 18 Mar 2021 13:51:23 +0000 (15:51 +0200)]
RDMA/mlx5: Fix drop packet rule in egress table
[ Upstream commit
c73700806d4e430d182c2be069d230076818a99a ]
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes:
f29de9eee782 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Wed, 24 Mar 2021 08:16:03 +0000 (16:16 +0800)]
iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK
[ Upstream commit
655c447c97d7fe462e6cd9e15809037be028bc70 ]
In arm_smmu_gerror_handler(), the value of the SMMU_GERROR register is
filtered by GERROR_ERR_MASK. However, the GERROR_ERR_MASK does not contain
the SFM bit. As a result, the subsequent error processing is not performed
when only the SFM error occurs.
Fixes:
48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reported-by: Rui Zhu <zhurui3@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210324081603.1074-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Wed, 3 Mar 2021 03:07:42 +0000 (11:07 +0800)]
ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk
[ Upstream commit
99067c07e8d877035f6249d194a317c78b7d052d ]
The call sequence in wm8960_configure_clocking is
ret = wm8960_configure_sysclk();
if (ret >= 0)
goto configure_clock;
....
ret = wm8960_configure_pll();
configure_clock:
...
wm8960_configure_sysclk is called before wm8960_configure_pll, as
there is bitclk relax on both functions, so wm8960_configure_sysclk
always return success, then wm8960_configure_pll() never be called.
With this case:
aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav
the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from
wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll.
it can get correct bitclk 2304000.
So bitclk relax condition should be removed in wm8960_configure_sysclk,
then wm8960_configure_pll can be called, and there is also bitclk relax
function in wm8960_configure_pll.
Fixes:
3c01b9ee2ab9 ("ASoC: codec: wm8960: Relax bit clock computation")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huang Pei [Wed, 24 Mar 2021 03:24:51 +0000 (11:24 +0800)]
MIPS: loongson64: fix bug when PAGE_SIZE > 16KB
[ Upstream commit
509d36a941a3466b78d4377913623d210b162458 ]
When page size larger than 16KB, arguments "vaddr + size(16KB)" in
"ioremap_page_range(vaddr, vaddr + size,...)" called by
"add_legacy_isa_io" is not page-aligned.
As loongson64 needs at least page size 16KB to get rid of cache alias,
and "vaddr" is 64KB-aligned, and 64KB is largest page size supported,
rounding "size" up to PAGE_SIZE is enough for all page size supported.
Fixes:
6d0068ad15e4 ("MIPS: Loongson64: Process ISA Node in DeviceTree")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hanna Hawa [Fri, 19 Mar 2021 15:21:33 +0000 (17:21 +0200)]
pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero
[ Upstream commit
bd85125ea88513f637a62a72e8949c579c5c0a87 ]
A System Error (SError, followed by kernel panic) was detected when
trying to print the supported pins in a pinctrl device which supports
multiple pins per register. This change fixes the pcs_pin_dbg_show() in
pinctrl-single driver when bits_per_mux is not zero. In addition move
offset calculation and pin offset in register to common function.
Fixes:
4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-4-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hanna Hawa [Fri, 19 Mar 2021 15:21:32 +0000 (17:21 +0200)]
pinctrl: pinctrl-single: remove unused parameter
[ Upstream commit
8fa2ea202b13b6da81e26c399ff1d87488398453 ]
Remove unused parameter 'pin_pos' from pcs_add_pin().
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-3-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Wed, 24 Mar 2021 21:53:37 +0000 (14:53 -0700)]
inet: use bigger hash table for IP ID generation
[ Upstream commit
aa6dd211e4b1dde9d5dc25d699d35f789ae7eeba ]
In commit
73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes:
73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Huafei [Wed, 3 Mar 2021 03:28:24 +0000 (11:28 +0800)]
ima: Fix the error code for restoring the PCR value
[ Upstream commit
7990ccafaa37dc6d8bb095d4d7cd997e8903fd10 ]
In ima_restore_measurement_list(), hdr[HDR_PCR].data is pointing to a
buffer of type u8, which contains the dumped 32-bit pcr value.
Currently, only the least significant byte is used to restore the pcr
value. We should convert hdr[HDR_PCR].data to a pointer of type u32
before fetching the value to restore the correct pcr value.
Fixes:
47fdee60b47f ("ima: use ima_parse_buf() to parse measurements headers")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huang Pei [Tue, 23 Mar 2021 02:34:02 +0000 (10:34 +0800)]
MIPS: fix local_irq_{disable,enable} in asmmacro.h
[ Upstream commit
05c4e2721d7af0df7bc1378a23712a0fd16947b5 ]
commit
ba9196d2e005 ("MIPS: Make DIEI support as a config option")
use CPU_HAS_DIEI to indicate whether di/ei is implemented correctly,
without this patch, "local_irq_disable" from entry.S in 3A1000
(with buggy di/ei) lose protection of commit
e97c5b609880 ("MIPS:
Make irqflags.h functions preempt-safe for non-mipsr2 cpus")
Fixes:
ba9196d2e005 ("MIPS: Make DIEI support as a config option")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Tue, 2 Mar 2021 20:08:29 +0000 (13:08 -0700)]
powerpc/prom: Mark identical_pvr_fixup as __init
[ Upstream commit
1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ]
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit
889b3c1245de ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes:
14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Tue, 2 Mar 2021 19:50:14 +0000 (12:50 -0700)]
powerpc/fadump: Mark fadump_calculate_reserve_size as __init
[ Upstream commit
fbced1546eaaab57a32e56c974ea8acf10c6abd8 ]
If fadump_calculate_reserve_size() is not inlined, there is a modpost
warning:
WARNING: modpost: vmlinux.o(.text+0x5196c): Section mismatch in
reference from the function fadump_calculate_reserve_size() to the
function .init.text:parse_crashkernel()
The function fadump_calculate_reserve_size() references
the function __init parse_crashkernel().
This is often because fadump_calculate_reserve_size lacks a __init
annotation or the annotation of parse_crashkernel is wrong.
fadump_calculate_reserve_size() calls parse_crashkernel(), which is
marked as __init and fadump_calculate_reserve_size() is called from
within fadump_reserve_mem(), which is also marked as __init.
Mark fadump_calculate_reserve_size() as __init to fix the section
mismatch. Additionally, remove the inline keyword as it is not necessary
to inline this function; the compiler is still free to do so if it feels
it is worthwhile since commit
889b3c1245de ("compiler: remove
CONFIG_OPTIMIZE_INLINING entirely").
Fixes:
11550dc0a00b ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1300
Link: https://lore.kernel.org/r/20210302195013.2626335-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
KP Singh [Fri, 19 Mar 2021 19:21:17 +0000 (19:21 +0000)]
libbpf: Add explicit padding to btf_dump_emit_type_decl_opts
[ Upstream commit
ea24b19562fe5f72c78319dbb347b701818956d9 ]
Similar to
https://lore.kernel.org/bpf/
20210313210920.1959628-2-andrii@kernel.org/
When DECLARE_LIBBPF_OPTS is used with inline field initialization, e.g:
DECLARE_LIBBPF_OPTS(btf_dump_emit_type_decl_opts, opts,
.field_name = var_ident,
.indent_level = 2,
.strip_mods = strip_mods,
);
and compiled in debug mode, the compiler generates code which
leaves the padding uninitialized and triggers errors within libbpf APIs
which require strict zero initialization of OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes:
9f81654eebe8 ("libbpf: Expose BTF-to-C type declaration emitting API")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319192117.2310658-1-kpsingh@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 18 Mar 2021 19:40:34 +0000 (12:40 -0700)]
selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed
[ Upstream commit
cab62c37be057379a2a17b1b2eacd9dcba1e14dc ]
Trigger vmlinux.h and BPF skeletons re-generation if detected that bpftool was
re-compiled. Otherwise full `make clean` is required to get updated skeletons,
if bpftool is modified.
Fixes:
acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-11-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Pan [Tue, 2 Mar 2021 10:13:59 +0000 (02:13 -0800)]
iommu/vt-d: Reject unsupported page request modes
[ Upstream commit
78a523fe73b81b4447beb2d6c78c9fafae24eebb ]
When supervisor/privilige mode SVM is used, we bind init_mm.pgd with
a supervisor PASID. There should not be any page fault for init_mm.
Execution request with DMA read is also not supported.
This patch checks PRQ descriptor for both unsupported configurations,
reject them both with invalid responses.
Fixes:
1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-4-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shameer Kolothum [Wed, 3 Mar 2021 17:36:11 +0000 (17:36 +0000)]
iommu: Check dev->iommu in iommu_dev_xxx functions
[ Upstream commit
b9abb19fa5fd2d8a4be61c6cd4b2a48aa1a17f9c ]
The device iommu probe/attach might have failed leaving dev->iommu
to NULL and device drivers may still invoke these functions resulting
in a crash in iommu vendor driver code.
Hence make sure we check that.
Fixes:
a3a195929d40 ("iommu: Add APIs for multiple domains per device")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210303173611.520-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Sat, 13 Mar 2021 21:09:18 +0000 (13:09 -0800)]
bpftool: Fix maybe-uninitialized warnings
[ Upstream commit
4bbb3583687051ef99966ddaeb1730441b777d40 ]
Somehow when bpftool is compiled in -Og mode, compiler produces new warnings
about possibly uninitialized variables. Fix all the reported problems.
Fixes:
2119f2189df1 ("bpftool: add C output format option to btf dump subcommand")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Sat, 13 Mar 2021 21:09:17 +0000 (13:09 -0800)]
libbpf: Add explicit padding to bpf_xdp_set_link_opts
[ Upstream commit
dde7b3f5f2f458297aeccfd4783e53ab8ca046db ]
Adding such anonymous padding fixes the issue with uninitialized portions of
bpf_xdp_set_link_opts when using LIBBPF_DECLARE_OPTS macro with inline field
initialization:
DECLARE_LIBBPF_OPTS(bpf_xdp_set_link_opts, opts, .old_fd = -1);
When such code is compiled in debug mode, compiler is generating code that
leaves padding bytes uninitialized, which triggers error inside libbpf APIs
that do strict zero initialization checks for OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes:
bd5ca3ef93cd ("libbpf: Add function to set link XDP fd while specifying old program")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xie He [Thu, 11 Mar 2021 07:23:09 +0000 (23:23 -0800)]
net: lapbether: Prevent racing when checking whether the netif is running
[ Upstream commit
5acd0cfbfbb5a688da1bfb1a2152b0c855115a35 ]
There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.
However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).
This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Kosina [Tue, 16 Mar 2021 14:08:00 +0000 (15:08 +0100)]
Bluetooth: avoid deadlock between hci_dev->lock and socket lock
[ Upstream commit
17486960d79b900c45e0bb8fbcac0262848582ba ]
Commit
eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a
dependency between socket lock and hci_dev->lock that could lead to
deadlock.
It turns out that hci_conn_get_phy() is not in any way relying on hdev
being immutable during the runtime of this function, neither does it even
look at any of the members of hdev, and as such there is no need to hold
that lock.
This fixes the lockdep splat below:
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc1-00026-g73d464503354 #10 Not tainted
------------------------------------------------------
bluetoothd/1118 is trying to acquire lock:
ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth]
but task is already holding lock:
ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}:
lock_sock_nested+0x72/0xa0
l2cap_sock_ready_cb+0x18/0x70 [bluetooth]
l2cap_config_rsp+0x27a/0x520 [bluetooth]
l2cap_sig_channel+0x658/0x1330 [bluetooth]
l2cap_recv_frame+0x1ba/0x310 [bluetooth]
hci_rx_work+0x1cc/0x640 [bluetooth]
process_one_work+0x244/0x5f0
worker_thread+0x3c/0x380
kthread+0x13e/0x160
ret_from_fork+0x22/0x30
-> #2 (&chan->lock#2/1){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x33a/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (&conn->chan_lock){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x322/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&hdev->lock){+.+.}-{3:3}:
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
__mutex_lock+0xa3/0xa10
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
&hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&chan->lock#2/1);
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&hdev->lock);
*** DEADLOCK ***
1 lock held by bluetoothd/1118:
#0:
ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth]
stack backtrace:
CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10
Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
Call Trace:
dump_stack+0x7f/0xa1
check_noncircular+0x105/0x120
? __lock_acquire+0x147a/0x1a50
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? __lock_acquire+0x2e1/0x1a50
? lock_is_held_type+0xb4/0x120
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
__mutex_lock+0xa3/0xa10
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? lock_acquire+0x277/0x3d0
? mark_held_locks+0x49/0x70
? mark_held_locks+0x49/0x70
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb73df33eee
Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48
RSP: 002b:
00007fffcfbbbf08 EFLAGS:
00000203 ORIG_RAX:
0000000000000037
RAX:
ffffffffffffffda RBX:
0000000000000019 RCX:
00007fb73df33eee
RDX:
000000000000000e RSI:
0000000000000112 RDI:
0000000000000018
RBP:
0000000000000000 R08:
00007fffcfbbbf44 R09:
0000000000000000
R10:
00007fffcfbbbf3c R11:
0000000000000203 R12:
0000000000000000
R13:
0000000000000018 R14:
0000000000000000 R15:
0000556fcefc70d0
Fixes:
eab2404ba798 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Thu, 25 Feb 2021 20:47:30 +0000 (12:47 -0800)]
KVM: x86/mmu: Retry page faults that hit an invalid memslot
[ Upstream commit
e0c378684b6545ad2d4403bb701d0ac4932b4e95 ]
Retry page faults (re-enter the guest) that hit an invalid memslot
instead of treating the memslot as not existing, i.e. handling the
page fault as an MMIO access. When deleting a memslot, SPTEs aren't
zapped and the TLBs aren't flushed until after the memslot has been
marked invalid.
Handling the invalid slot as MMIO means there's a small window where a
page fault could replace a valid SPTE with an MMIO SPTE. The legacy
MMU handles such a scenario cleanly, but the TDP MMU assumes such
behavior is impossible (see the BUG() in __handle_changed_spte()).
There's really no good reason why the legacy MMU should allow such a
scenario, and closing this hole allows for additional cleanups.
Fixes:
2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210225204749.1512652-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcus Folkesson [Wed, 24 Feb 2021 16:37:06 +0000 (17:37 +0100)]
wilc1000: write value to WILC_INTR2_ENABLE register
[ Upstream commit
e21b6e5a54628cd3935f200049d4430c25c54e03 ]
Write the value instead of reading it twice.
Fixes:
c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210224163706.519658-1-marcus.folkesson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Zhang [Thu, 4 Mar 2021 12:45:17 +0000 (14:45 +0200)]
RDMA/mlx5: Fix mlx5 rates to IB rates map
[ Upstream commit
6fe6e568639859db960c8fcef19a2ece1c2d7eae ]
Correct the map between mlx5 rates and corresponding ib rates, as they
don't always have a fixed offset between them.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210304124517.1100608-4-leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cezary Rojewski [Mon, 25 Jan 2021 11:54:41 +0000 (12:54 +0100)]
ASoC: Intel: Skylake: Compile when any configuration is selected
[ Upstream commit
1b99d50b9709a2cddaba4a7faf1862b4f7bec865 ]
Skylake is dependent on SND_SOC_INTEL_SKYLAKE (aka "all SST platforms")
whereas selecting specific configuration such as KBL-only will not
cause driver code to compile. Switch to SND_SOC_INTEL_SKYLAKE_COMMON
dependency so selecting any configuration causes the driver to be built.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Fixes:
35bc99aaa1a3 ("ASoC: Intel: Skylake: Add more platform granularity")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20210125115441.10383-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Fri, 26 Feb 2021 18:56:53 +0000 (18:56 +0000)]
ASoC: Intel: boards: sof-wm8804: add check for PLL setting
[ Upstream commit
1730ef62874dbdc53dc2abfa430f09f0b304bafc ]
Currently the return from snd_soc_dai_set_pll is not checking for
failure, this is the only driver in the kernel that ignores this,
so it probably should be added for sake of completeness. Fix this
by adding an error return check.
Addresses-Coverity: ("Unchecked return value")
Fixes:
f139546fb7d4 ("ASoC: Intel: boards: sof-wm8804: support for Hifiberry Digiplus boards")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210226185653.1071321-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Mon, 8 Mar 2021 14:17:51 +0000 (11:17 -0300)]
perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars
[ Upstream commit
210e4c89ef61432040c6cd828fefa441f4887186 ]
The 'ret' variable was initialized to zero but then it was not updated
from the fprintf() return, fix it.
Reported-by: Yang Li <yang.lee@linux.alibaba.com>
cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
cc: Ingo Molnar <mingo@redhat.com>
cc: Jiri Olsa <jolsa@redhat.com>
cc: Mark Rutland <mark.rutland@arm.com>
cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Fixes:
90f18e63fbd00513 ("perf symbols: List symbols in a dso in ascending name order")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Mikityanskiy [Sun, 7 Feb 2021 14:47:40 +0000 (16:47 +0200)]
HID: plantronics: Workaround for double volume key presses
[ Upstream commit
f567d6ef8606fb427636e824c867229ecb5aefab ]
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes:
81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Thu, 18 Feb 2021 20:50:31 +0000 (20:50 +0000)]
xsk: Respect device's headroom and tailroom on generic xmit path
[ Upstream commit
3914d88f7608e6c2e80e344474fa289370c32451 ]
xsk_generic_xmit() allocates a new skb and then queues it for
xmitting. The size of new skb's headroom is desc->len, so it comes
to the driver/device with no reserved headroom and/or tailroom.
Lots of drivers need some headroom (and sometimes tailroom) to
prepend (and/or append) some headers or data, e.g. CPU tags,
device-specific headers/descriptors (LSO, TLS etc.), and if case
of no available space skb_cow_head() will reallocate the skb.
Reallocations are unwanted on fast-path, especially when it comes
to XDP, so generic XSK xmit should reserve the spaces declared in
dev->needed_headroom and dev->needed tailroom to avoid them.
Note on max(NET_SKB_PAD, L1_CACHE_ALIGN(dev->needed_headroom)):
Usually, output functions reserve LL_RESERVED_SPACE(dev), which
consists of dev->hard_header_len + dev->needed_headroom, aligned
by 16.
However, on XSK xmit hard header is already here in the chunk, so
hard_header_len is not needed. But it'd still be better to align
data up to cacheline, while reserving no less than driver requests
for headroom. NET_SKB_PAD here is to double-insure there will be
no reallocations even when the driver advertises no needed_headroom,
but in fact need it (not so rare case).
Fixes:
35fcde7f8deb ("xsk: support for Tx")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210218204908.5455-5-alobakin@pm.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Yunlong [Mon, 26 Apr 2021 14:32:29 +0000 (07:32 -0700)]
drivers/block/null_blk/main: Fix a double free in null_init.
[ Upstream commit
72ce11ddfa4e9e1879103581a60b7e34547eaa0a ]
In null_init, null_add_dev(dev) is called.
In null_add_dev, it calls null_free_zoned_dev(dev) to free dev->zones
via kvfree(dev->zones) in out_cleanup_zone branch and returns err.
Then null_init accept the err code and then calls null_free_dev(dev).
But in null_free_dev(dev), dev->zones is freed again by
null_free_zoned_dev().
My patch set dev->zones to NULL in null_free_zoned_dev() after
kvfree(dev->zones) is called, to avoid the double free.
Fixes:
2984c8684f962 ("nullb: factor disk parameters")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210426143229.7374-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Waiman Long [Thu, 15 Apr 2021 19:54:26 +0000 (15:54 -0400)]
sched/debug: Fix cgroup_path[] serialization
[ Upstream commit
ad789f84c9a145f8a18744c0387cec22ec51651e ]
The handling of sysrq key can be activated by echoing the key to
/proc/sysrq-trigger or via the magic key sequence typed into a terminal
that is connected to the system in some way (serial, USB or other mean).
In the former case, the handling is done in a user context. In the
latter case, it is likely to be in an interrupt context.
Currently in print_cpu() of kernel/sched/debug.c, sched_debug_lock is
taken with interrupt disabled for the whole duration of the calls to
print_*_stats() and print_rq() which could last for the quite some time
if the information dump happens on the serial console.
If the system has many cpus and the sched_debug_lock is somehow busy
(e.g. parallel sysrq-t), the system may hit a hard lockup panic
depending on the actually serial console implementation of the
system.
The purpose of sched_debug_lock is to serialize the use of the global
cgroup_path[] buffer in print_cpu(). The rests of the printk calls don't
need serialization from sched_debug_lock.
Calling printk() with interrupt disabled can still be problematic if
multiple instances are running. Allocating a stack buffer of PATH_MAX
bytes is not feasible because of the limited size of the kernel stack.
The solution implemented in this patch is to allow only one caller at a
time to use the full size group_path[], while other simultaneous callers
will have to use shorter stack buffers with the possibility of path
name truncation. A "..." suffix will be printed if truncation may have
happened. The cgroup path name is provided for informational purpose
only, so occasional path name truncation should not be a big problem.
Fixes:
efe25c2c7b3a ("sched: Reinstate group names in /proc/sched_debug")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415195426.6677-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Begunkov [Thu, 15 Apr 2021 12:07:39 +0000 (13:07 +0100)]
io_uring: fix overflows checks in provide buffers
[ Upstream commit
38134ada0ceea3e848fe993263c0ff6207fd46e7 ]
Colin reported before possible overflow and sign extension problems in
io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing
useful, see
d81269fecb8ce ("io_uring: fix provide_buffers sign extension").
Do that with help of check_<op>_overflow helpers. And fix struct
io_provide_buf::len type, as it doesn't make much sense to keep it
signed.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes:
efe68c1ca8f49 ("io_uring: validate the full range of provided buffers for access")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/46538827e70fce5f6cdb50897cff4cacc490f380.1618488258.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Thu, 15 Apr 2021 00:11:12 +0000 (17:11 -0700)]
perf/amd/uncore: Fix sysfs type mismatch
[ Upstream commit
5deac80d4571dffb51f452f0027979d72259a1b9 ]
dev_attr_show() calls the __uncore_*_show() functions via an indirect
call but their type does not currently match the type of the show()
member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_l3/format/umask
config:8-15
$ dmesg | grep "CFI failure"
[ 1258.174653] CFI failure (target: __uncore_umask_show...):
Update the type in the DEFINE_UNCORE_FORMAT_ATTR macro to match
'struct device_attribute' so that there is no more CFI violation.
Fixes:
06f2c24584f3 ("perf/amd/uncore: Prepare to scale for more attributes that vary per family")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-2-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Thu, 15 Apr 2021 00:11:11 +0000 (17:11 -0700)]
x86/events/amd/iommu: Fix sysfs type mismatch
[ Upstream commit
de5bc7b425d4c27ae5faa00ea7eb6b9780b9a355 ]
dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a
$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):
Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.
Fixes:
7be6296fdd75 ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 9 Apr 2021 11:08:17 +0000 (14:08 +0300)]
HSI: core: fix resource leaks in hsi_add_client_from_dt()
[ Upstream commit
5c08b0f75575648032f309a6f58294453423ed93 ]
If some of the allocations fail between the dev_set_name() and the
device_register() then the name will not be freed. Fix this by
moving dev_set_name() directly in front of the call to device_register().
Fixes:
a2aa24734d9d ("HSI: Add common DT binding for HSI client devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Mon, 12 Apr 2021 15:43:49 +0000 (17:43 +0200)]
media: cedrus: Fix H265 status definitions
[ Upstream commit
147d211cc9b4d753148d1640a1758b25edfbf437 ]
Some of the H265 status flags are wrong. Redefine them to corespond to
Allwinner CedarC open source userspace library. Only one of these flags
is actually used and new value also matches value used in libvdpau-sunxi
library, which is proven to be working.
Note that wrong (old) value in right circumstances (in combination with
another H265 decoding bug) causes driver lock up. With this fix decoding
is still broken (green output) but at least driver doesn't lock up.
Fixes:
86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Cassel [Fri, 9 Apr 2021 18:12:55 +0000 (20:12 +0200)]
nvme-pci: don't simple map sgl when sgls are disabled
[ Upstream commit
e51183be1fa96dc6d3cd11b3c25a0f595807315e ]
According to the module parameter description for sgl_threshold,
a value of 0 means that SGLs are disabled.
If SGLs are disabled, we should respect that, even for the case
where the request is made up of a single physical segment.
Fixes:
297910571f08 ("nvme-pci: optimize mapping single segment requests using SGLs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Elad Grupi [Wed, 31 Mar 2021 09:13:14 +0000 (17:13 +0800)]
nvmet-tcp: fix a segmentation fault during io parsing error
[ Upstream commit
bdaf13279192c60b2b1fc99badef53b494fec055 ]
In case there is an io that contains inline data and it goes to
parsing error flow, command response will free command and iov
before clearing the data on the socket buffer.
This will delay the command response until receive flow is completed.
Fixes:
872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabrice Gasnier [Wed, 3 Mar 2021 17:51:35 +0000 (18:51 +0100)]
mfd: stm32-timers: Avoid clearing auto reload register
[ Upstream commit
4917e498c6894ba077867aff78f82cffd5ffbb5c ]
The ARR register is cleared unconditionally upon probing, after the maximum
value has been read. This initial condition is rather not intuitive, when
considering the counter child driver. It rather expects the maximum value
by default:
- The counter interface shows a zero value by default for 'ceiling'
attribute.
- Enabling the counter without any prior configuration makes it doesn't
count.
The reset value of ARR register is the maximum. So Choice here
is to backup it, and restore it then, instead of clearing its value.
It also fixes the initial condition seen by the counter driver.
Fixes:
d0f949e220fd ("mfd: Add STM32 Timers driver")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Orson Zhai [Fri, 19 Mar 2021 06:15:35 +0000 (14:15 +0800)]
mailbox: sprd: Introduce refcnt when clients requests/free channels
[ Upstream commit
9468ab84032f96496e998cfa173cd1d0ac316bcd ]
Unisoc mailbox has no way to be enabled/disabled for any single channel.
They can only be set to startup or shutdown as a whole device at same time.
Add a variable to count references to avoid mailbox FIFO being reset
unexpectedly when clients are requesting or freeing channels.
Also add a lock to dismiss possible conflicts from register r/w in
different startup or shutdown threads. And fix the crash problem when early
interrupts come from channel which has not been requested by client yet.
Fixes:
ca27fc26cd22 ("mailbox: sprd: Add Spreadtrum mailbox driver")
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian King [Tue, 13 Apr 2021 00:10:09 +0000 (18:10 -0600)]
scsi: ibmvfc: Fix invalid state machine BUG_ON()
[ Upstream commit
15cfef8623a449d40d16541687afd58e78033be3 ]
This fixes an issue hitting the BUG_ON() in ibmvfc_do_work(). When going
through a host action of IBMVFC_HOST_ACTION_RESET, we change the action to
IBMVFC_HOST_ACTION_TGT_DEL, then drop the host lock, and reset the CRQ,
which changes the host state to IBMVFC_NO_CRQ. If, prior to setting the
host state to IBMVFC_NO_CRQ, ibmvfc_init_host() is called, it can then end
up changing the host action to IBMVFC_HOST_ACTION_INIT. If we then change
the host state to IBMVFC_NO_CRQ, we will then hit the BUG_ON().
Make a couple of changes to avoid this. Leave the host action to be
IBMVFC_HOST_ACTION_RESET or IBMVFC_HOST_ACTION_REENABLE until after we drop
the host lock and reset or reenable the CRQ. Also harden the host state
machine to ensure we cannot leave the reset / reenable state until we've
finished processing the reset or reenable.
Link: https://lore.kernel.org/r/20210413001009.902400-1-tyreld@linux.ibm.com
Fixes:
73ee5d867287 ("[SCSI] ibmvfc: Fix soft lockup on resume")
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
[tyreld: added fixes tag]
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mkp: fix comment checkpatch warnings]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Tue, 30 Mar 2021 17:45:12 +0000 (20:45 +0300)]
scsi: sni_53c710: Add IRQ check
[ Upstream commit
1160d61bc51e87e509cfaf9da50a0060f67b6de4 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV
further below). Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru
Fixes:
c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Tue, 30 Mar 2021 17:44:08 +0000 (20:44 +0300)]
scsi: sun3x_esp: Add IRQ check
[ Upstream commit
14b321380eb333c82853d7d612d0995f05f88fdc ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru
Fixes:
0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Tue, 30 Mar 2021 17:43:23 +0000 (20:43 +0300)]
scsi: jazz_esp: Add IRQ check
[ Upstream commit
38fca15c29db6ed06e894ac194502633e2a7d1fb ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru
Fixes:
352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Sat, 3 Apr 2021 20:43:55 +0000 (23:43 +0300)]
scsi: hisi_sas: Fix IRQ checks
[ Upstream commit
6c11dc060427e07ca144eacaccd696106b361b06 ]
Commit
df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take
into account that irq_of_parse_and_map() and platform_get_irq() have a
different way of indicating an error: the former returns 0 and the latter
returns a negative error code. Fix up the IRQ checks!
Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru
Fixes:
df2d8213d9e3 ("hisi_sas: use platform_get_irq()")
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Mon, 29 Mar 2021 20:50:58 +0000 (23:50 +0300)]
scsi: ufs: ufshcd-pltfrm: Fix deferred probing
[ Upstream commit
339c9b63cc7ce779ce45c675bf709cb58b807fc3 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream as it should have been done from the start...
Link: https://lore.kernel.org/r/420364ca-614a-45e3-4e35-0e0653c7bc53@omprussia.ru
Fixes:
2953f850c3b8 ("[SCSI] ufs: use devres functions for ufshcd")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Wed, 7 Apr 2021 13:58:40 +0000 (14:58 +0100)]
scsi: pm80xx: Fix potential infinite loop
[ Upstream commit
40fa7394a1ad5706e795823276f2e394cca145d0 ]
The for-loop iterates with a u8 loop counter i and compares this with the
loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a
potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop
counter. Fix this by making the loop counter the same type as
pm8001_ha->max_q_num.
[mkp: this is purely theoretical, max_q_num is currently limited to 64]
Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com
Fixes:
65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure")
Addresses-Coverity: ("Infinite loop")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Igor Pylypiv [Tue, 6 Apr 2021 18:05:33 +0000 (11:05 -0700)]
scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()
[ Upstream commit
3f744a14f331f56703a9d74e86520db045f11831 ]
The mpi_uninit_check() takes longer for inbound doorbell register to be
cleared. Increase the timeout substantially so that the driver does not
fail to load.
Previously, the inbound doorbell wait time was mistakenly increased in the
mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the
mpi_init_check() wait time as-is as these are timeout values and if there
is a failure, waiting longer is not an issue.
Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com
Fixes:
e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Fri, 9 Apr 2021 09:01:03 +0000 (10:01 +0100)]
clk: uniphier: Fix potential infinite loop
[ Upstream commit
f6b1340dc751a6caa2a0567b667d0f4f4172cd58 ]
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents. Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.
Addresses-Coverity: ("Infinite loop")
Fixes:
734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yingjie Wang [Wed, 7 Apr 2021 03:10:04 +0000 (20:10 -0700)]
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
[ Upstream commit
25315ebfaefcffd126a266116b37bb8a3d1c4620 ]
In radeon_dp_mst_detect(), We should check whether or not @connector
has been unregistered from userspace. If the connector is unregistered,
we should return disconnected status.
Fixes:
9843ead08f18 ("drm/radeon: add DisplayPort MST support (v2)")
Signed-off-by: Yingjie Wang <wangyingjie55@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nirmoy Das [Wed, 17 Mar 2021 10:38:11 +0000 (11:38 +0100)]
drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct
[ Upstream commit
3bb1105071fb974e3e3ca2f92ddfd69c81285ab6 ]
Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct()
can't sleep.
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311
as dcn20_resource_construct() also calls into SMU functions which does
mutex_lock().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Hui [Fri, 9 Apr 2021 08:23:52 +0000 (16:23 +0800)]
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
d0a859edda46b45baeab9687d173102300d76e2b ]
CONFIG_IPQ_APSS_PLL is tristate option and therefore this driver can
be compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.
Fixes:
ecd2bacfbbc4 ("clk: qcom: Add ipq apss pll driver")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-4-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Hui [Fri, 9 Apr 2021 08:23:51 +0000 (16:23 +0800)]
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
790b516ada10a4dcc0f0a56dc0ced475d86d5820 ]
CONFIG_QCOM_A53PLL is tristate option and therefore this driver can be
compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.
Fixes:
0c6ab1b8f894 ("clk: qcom: Add A53 PLL support")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-3-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 30 Mar 2021 09:31:52 +0000 (12:31 +0300)]
drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()
[ Upstream commit
5842ab76bbfadb37eaea91e53c1efe34ae504e4a ]
The dp->train_set[] for this driver is only two characters, not four so
this memsets too much. Fortunately, this ends up corrupting a struct
hole and not anything important.
Fixes:
d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quanyang Wang [Tue, 6 Apr 2021 15:31:31 +0000 (23:31 +0800)]
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
[ Upstream commit
394cdb69a3c30b33524cf1204afe5cceaba69cdc ]
If there is a IOCTL_SET_PLL_FRAC_MODE request sent to ATF ever,
we shouldn't skip invoking PM_CLOCK_ENABLE fn even though this
pll has been enabled. In ATF implementation, it will only assign
the mode to the variable (struct pm_pll *)pll->mode when handling
IOCTL_SET_PLL_FRAC_MODE call. Invoking PM_CLOCK_ENABLE can force
ATF send request to PWU to set the pll mode to PLL's register.
There is a scenario that happens in enabling VPLL_INT(clk_id:96):
1) VPLL_INT has been enabled during booting.
2) A driver calls clk_set_rate and according to the rate, the VPLL_INT
should be set to FRAC mode. Then zynqmp_pll_set_mode is called
to pass IOCTL_SET_PLL_FRAC_MODE to ATF. Note that at this point
ATF just stores the mode to a variable.
3) This driver calls clk_prepare_enable and zynqmp_pll_enable is
called to try to enable VPLL_INT pll. Because of 1), the function
zynqmp_pll_enable just returns without doing anything after checking
that this pll has been enabled.
In the scenario above, the pll mode of VPLL_INT will never be set
successfully. So adding set_pll_mode to check condition to fix it.
Fixes:
3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210406153131.601701-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quanyang Wang [Tue, 6 Apr 2021 15:40:15 +0000 (23:40 +0800)]
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
[ Upstream commit
d7fd3f9f53df8bb2212dff70f66f12cae0e1a653 ]
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
Fixes:
3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210406154015.602779-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Tue, 6 Apr 2021 19:40:25 +0000 (16:40 -0300)]
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
[ Upstream commit
b5a1f8921d5040bb788492bf33a66758021e4be5 ]
There is a small race where the parent is NULL even though the kobj has
already been made visible in sysfs.
For instance the attribute_group is made visible in sysfs_create_files()
and the mdev_type_attr_show() does:
ret = attr->show(kobj, type->parent->dev, buf);
Which will crash on NULL parent. Move the parent setup to before the type
pointer leaves the stack frame.
Fixes:
7b96953bc640 ("vfio: Mediated device Core driver")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <2-v2-
d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Tue, 30 Mar 2021 15:53:06 +0000 (09:53 -0600)]
vfio/pci: Re-order vfio_pci_probe()
[ Upstream commit
4aeec3984ddc853f7c65903bde472ffdef738bae ]
vfio_add_group_dev() must be called only after all of the private data in
vdev is fully setup and ready, otherwise there could be races with user
space instantiating a device file descriptor and starting to call ops.
For instance vfio_pci_reflck_attach() sets vdev->reflck and
vfio_pci_open(), called by fops open, unconditionally derefs it, which
will crash if things get out of order.
Fixes:
cc20d7999000 ("vfio/pci: Introduce VF token")
Fixes:
e309df5b0c9e ("vfio/pci: Parallelize device open and release")
Fixes:
6eb7018705de ("vfio-pci: Move idle devices to D3hot power state")
Fixes:
ecaa1f6a0154 ("vfio-pci: Add VGA arbiter client")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <8-v3-
225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Tue, 30 Mar 2021 15:53:06 +0000 (09:53 -0600)]
vfio/pci: Move VGA and VF initialization to functions
[ Upstream commit
61e90817482871b614133c0f20feb1aba2faec86 ]
vfio_pci_probe() is quite complicated, with optional VF and VGA sub
components. Move these into clear init/uninit functions and have a linear
flow in probe/remove.
This fixes a few little buglets:
- vfio_pci_remove() is in the wrong order, vga_client_register() removes
a notifier and is after kfree(vdev), but the notifier refers to vdev,
so it can use after free in a race.
- vga_client_register() can fail but was ignored
Organize things so destruction order is the reverse of creation order.
Fixes:
ecaa1f6a0154 ("vfio-pci: Add VGA arbiter client")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <7-v3-
225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Tue, 30 Mar 2021 15:53:06 +0000 (09:53 -0600)]
vfio/fsl-mc: Re-order vfio_fsl_mc_probe()
[ Upstream commit
2b1fe162e584a88ec7f12a651a2a50f94dd8cfac ]
vfio_add_group_dev() must be called only after all of the private data in
vdev is fully setup and ready, otherwise there could be races with user
space instantiating a device file descriptor and starting to call ops.
For instance vfio_fsl_mc_reflck_attach() sets vdev->reflck and
vfio_fsl_mc_open(), called by fops open, unconditionally derefs it, which
will crash if things get out of order.
This driver started life with the right sequence, but two commits added
stuff after vfio_add_group_dev().
Fixes:
2e0d29561f59 ("vfio/fsl-mc: Add irq infrastructure for fsl-mc devices")
Fixes:
f2ba7e8c947b ("vfio/fsl-mc: Added lock support in preparation for interrupt handling")
Co-developed-by: Diana Craciun OSS <diana.craciun@oss.nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <5-v3-
225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Sat, 27 Mar 2021 11:27:40 +0000 (12:27 +0100)]
media: v4l2-ctrls.c: fix race condition in hdl->requests list
[ Upstream commit
be7e8af98f3af729aa9f08b1053f9533a5cceb91 ]
When a request is re-inited it will release all control handler
objects that are still in the request. It does that by unbinding
and putting all those objects. When the object is unbound the
obj->req pointer is set to NULL, and the object's unbind op is
called. When the object it put the object's release op is called
to free the memory.
For a request object that contains a control handler that means
that v4l2_ctrl_handler_free() is called in the release op.
A control handler used in a request has a pointer to the main
control handler that is created by the driver and contains the
current state of all controls. If the device is unbound (due to
rmmod or a forced unbind), then that main handler is freed, again
by calling v4l2_ctrl_handler_free(), and any outstanding request
objects that refer to that main handler have to be unbound and put
as well.
It does that by this test:
if (!hdl->req_obj.req && !list_empty(&hdl->requests)) {
I.e. the handler has no pointer to a request, so is the main
handler, and one or more request objects refer to this main
handler.
However, this test is wrong since hdl->req_obj.req is actually
NULL when re-initing a request (the object unbind will set req to
NULL), and the only reason this seemingly worked is that the
requests list is typically empty since the request's unbind op
will remove the handler from the requests list.
But if another thread is at the same time adding a new control
to a request, then there is a race condition where one thread
is removing a control handler object from the requests list and
another thread is adding one. The result is that hdl->requests
is no longer empty and the code thinks that a main handler is
being freed instead of a control handler that is part of a request.
There are two bugs here: first the test for hdl->req_obj.req: this
should be hdl->req_obj.ops since only the main control handler will
have a NULL pointer there.
The second is that adding or deleting request objects from the
requests list of the main handler isn't protected by taking the
main handler's lock.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: John Cox <jc@kynesim.co.uk>
Fixes:
6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Tested-by: John Cox <jc@kynesim.co.uk>
Reported-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lad Prabhakar [Thu, 11 Mar 2021 09:52:05 +0000 (10:52 +0100)]
media: i2c: imx219: Balance runtime PM use-count
[ Upstream commit
dd90caa0111e178b52b21e56364bc2244a3973b3 ]
Move incrementing/decrementing runtime PM count to
imx219_start_streaming()/imx219_stop_streaming() functions respectively.
This fixes an issue of unbalanced runtime PM count in resume callback
error path where streaming is stopped and runtime PM count is left
unbalanced.
Fixes:
1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lad Prabhakar [Thu, 11 Mar 2021 09:52:04 +0000 (10:52 +0100)]
media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream
[ Upstream commit
745d4612d2c853c00abadbf69799c8aee7f99c39 ]
Move out locking/unlocking of vflip and hflip controls from
imx219_set_stream() to the imx219_start_streaming()/
imx219_stop_streaming() respectively.
This fixes an issue in resume callback error path where streaming is
stopped and the controls are left in locked state.
Fixes:
1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hannes Reinecke [Sat, 5 Dec 2020 15:29:01 +0000 (16:29 +0100)]
nvme: retrigger ANA log update if group descriptor isn't found
[ Upstream commit
dd8f7fa908f66dd44abcd83cbb50410524b9f8ef ]
If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.
Fixes:
32acab3181c7 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Rivera-Matos [Wed, 10 Feb 2021 22:56:46 +0000 (16:56 -0600)]
power: supply: bq25980: Move props from battery node
[ Upstream commit
04722cec1436c732d39153ce6ae2ebf71ac3ade7 ]
Currently POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT and
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE are exposed on
the battery node and this is incorrect.
This patch exposes both of them on the charger node rather
than the battery node.
Fixes:
5069185fc18e ("power: supply: bq25980: Add support for the BQ259xx family")
Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam Ford [Sat, 13 Mar 2021 12:28:17 +0000 (06:28 -0600)]
clk: imx: Fix reparenting of UARTs not associated with stdout
[ Upstream commit
379c9a24cc239000b1dec53db02fe17a86947423 ]
Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.
clk: failed to reparent uart1 to sys_pll1_80m: -16
Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.
When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.
Fixes:
9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Sun, 21 Mar 2021 07:08:49 +0000 (00:08 -0700)]
nvmet-tcp: fix incorrect locking in state_change sk callback
[ Upstream commit
b5332a9f3f3d884a1b646ce155e664cc558c1722 ]
We are not changing anything in the TCP connection state so
we should not take a write_lock but rather a read lock.
This caused a deadlock when running nvmet-tcp and nvme-tcp
on the same system, where state_change callbacks on the
host and on the controller side have causal relationship
and made lockdep report on this with blktests:
================================
WARNING: inconsistent lock state
5.12.0-rc3 #1 Tainted: G I
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage.
nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
{IN-SOFTIRQ-W} state was registered at:
__lock_acquire+0x79b/0x18d0
lock_acquire+0x1ca/0x480
_raw_write_lock_bh+0x39/0x80
nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp]
tcp_fin+0x2a8/0x780
tcp_data_queue+0xf94/0x1f20
tcp_rcv_established+0x6ba/0x1f00
tcp_v4_do_rcv+0x502/0x760
tcp_v4_rcv+0x257e/0x3430
ip_protocol_deliver_rcu+0x69/0x6a0
ip_local_deliver_finish+0x1e2/0x2f0
ip_local_deliver+0x1a2/0x420
ip_rcv+0x4fb/0x6b0
__netif_receive_skb_one_core+0x162/0x1b0
process_backlog+0x1ff/0x770
__napi_poll.constprop.0+0xa9/0x5c0
net_rx_action+0x7b3/0xb30
__do_softirq+0x1f0/0x940
do_softirq+0xa1/0xd0
__local_bh_enable_ip+0xd8/0x100
ip_finish_output2+0x6b7/0x18a0
__ip_queue_xmit+0x706/0x1aa0
__tcp_transmit_skb+0x2068/0x2e20
tcp_write_xmit+0xc9e/0x2bb0
__tcp_push_pending_frames+0x92/0x310
inet_shutdown+0x158/0x300
__nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp]
nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp]
nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp]
nvme_do_delete_ctrl+0x100/0x10c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x2c7/0x460
new_sync_write+0x36c/0x610
vfs_write+0x5c0/0x870
ksys_write+0xf9/0x1d0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
irq event stamp: 10687
hardirqs last enabled at (10687): [<
ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40
hardirqs last disabled at (10686): [<
ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90
softirqs last enabled at (10684): [<
ffffffff9f000608>] __do_softirq+0x608/0x940
softirqs last disabled at (10649): [<
ffffffff9cdedd31>] do_softirq+0xa1/0xd0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(clock-AF_INET);
<Interrupt>
lock(clock-AF_INET);
*** DEADLOCK ***
5 locks held by nvme/1324:
#0:
ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0
#1:
ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460
#2:
ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330
#3:
ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp]
#4:
ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300
stack backtrace:
CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020
Call Trace:
dump_stack+0x93/0xc2
mark_lock_irq.cold+0x2c/0xb3
? verify_lock_unused+0x390/0x390
? stack_trace_consume_entry+0x160/0x160
? lock_downgrade+0x100/0x100
? save_trace+0x88/0x5e0
? _raw_spin_unlock_irqrestore+0x2d/0x40
mark_lock+0x530/0x1470
? mark_lock_irq+0x1d10/0x1d10
? enqueue_timer+0x660/0x660
mark_usage+0x215/0x2a0
__lock_acquire+0x79b/0x18d0
? tcp_schedule_loss_probe.part.0+0x38c/0x520
lock_acquire+0x1ca/0x480
? nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
? rcu_read_unlock+0x40/0x40
? tcp_mtu_probe+0x1ae0/0x1ae0
? kmalloc_reserve+0xa0/0xa0
? sysfs_file_ops+0x170/0x170
_raw_read_lock+0x3d/0xa0
? nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
? sysfs_file_ops+0x170/0x170
inet_shutdown+0x189/0x300
__nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp]
nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp]
nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp]
nvme_do_delete_ctrl+0x100/0x10c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x2c7/0x460
new_sync_write+0x36c/0x610
? new_sync_read+0x600/0x600
? lock_acquire+0x1ca/0x480
? rcu_read_unlock+0x40/0x40
? lock_is_held_type+0x9a/0x110
vfs_write+0x5c0/0x870
ksys_write+0xf9/0x1d0
? __ia32_sys_read+0xa0/0xa0
? lockdep_hardirqs_on_prepare.part.0+0x198/0x340
? syscall_enter_from_user_mode+0x27/0x70
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes:
872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Sun, 21 Mar 2021 07:08:48 +0000 (00:08 -0700)]
nvme-tcp: block BH in sk state_change sk callback
[ Upstream commit
8b73b45d54a14588f86792869bfb23098ea254cb ]
The TCP stack can run from process context for a long time
so we should disable BH here.
Fixes:
3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kenta.Tada@sony.com [Sun, 21 Mar 2021 15:52:19 +0000 (15:52 +0000)]
seccomp: Fix CONFIG tests for Seccomp_filters
[ Upstream commit
64bdc0244054f7d4bb621c8b4455e292f4e421bc ]
Strictly speaking, seccomp filters are only used
when CONFIG_SECCOMP_FILTER.
This patch fixes the condition to enable "Seccomp_filters"
in /proc/$pid/status.
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Fixes:
c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/OSBPR01MB26772D245E2CF4F26B76A989F5669@OSBPR01MB2677.jpnprd01.prod.outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Mon, 15 Mar 2021 20:15:06 +0000 (23:15 +0300)]
ata: libahci_platform: fix IRQ check
[ Upstream commit
b30d0040f06159de97ad9c0b1536f47250719d7d ]
Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...
Fixes:
c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Sat, 27 Mar 2021 21:13:49 +0000 (00:13 +0300)]
sata_mv: add IRQ checks
[ Upstream commit
e6471a65fdd5efbb8dd2732dd0f063f960685ceb ]
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...
Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).
Fixes:
f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Thu, 25 Mar 2021 20:51:10 +0000 (23:51 +0300)]
pata_ipx4xx_cf: fix IRQ check
[ Upstream commit
e379b40cc0f179403ce0b82b7e539f635a568da5 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...
Fixes:
0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Thu, 25 Mar 2021 20:50:24 +0000 (23:50 +0300)]
pata_arasan_cf: fix IRQ check
[ Upstream commit
c7e8f404d56b99c80990b19a402c3f640d74be05 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...
Fixes:
a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilya Leoshkevich [Wed, 3 Mar 2021 00:44:20 +0000 (01:44 +0100)]
selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)
[ Upstream commit
cb4969e6f9f5ee12521aec764fa3d4bbd91bc797 ]
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes:
1a940687e424 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Thu, 25 Mar 2021 10:08:31 +0000 (19:08 +0900)]
x86/kprobes: Fix to check non boostable prefixes correctly
[ Upstream commit
6dd3b8c9f58816a1354be39559f630cd1bd12159 ]
There are 2 bugs in the can_boost() function because of using
x86 insn decoder. Since the insn->opcode never has a prefix byte,
it can not find CS override prefix in it. And the insn->attr is
the attribute of the opcode, thus inat_is_address_size_prefix(
insn->attr) always returns false.
Fix those by checking each prefix bytes with for_each_insn_prefix
loop and getting the correct attribute for each prefix byte.
Also, this removes unlikely, because this is a slow path.
Fixes:
a8d11cd0714f ("kprobes/x86: Consolidate insn decoder users for copying code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/161666691162.1120877.2808435205294352583.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel test robot [Mon, 22 Mar 2021 18:21:39 +0000 (19:21 +0100)]
of: overlay: fix for_each_child.cocci warnings
[ Upstream commit
c4d74f0f978ed5ceee62cd3f6708081042e582a1 ]
Function "for_each_child_of_node" should have of_node_put() before goto.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Fixes:
82c2d81361ec ("coccinelle: iterators: Add for_each_child.cocci script")
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103221918450.2918@hadrien
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felix Kuehling [Tue, 9 Mar 2021 03:15:42 +0000 (22:15 -0500)]
drm/amdkfd: fix build error with AMD_IOMMU_V2=m
[ Upstream commit
1e87068570a2cc4db5f95a881686add71729e769 ]
Using 'imply AMD_IOMMU_V2' does not guarantee that the driver can link
against the exported functions. If the GPU driver is built-in but the
IOMMU driver is a loadable module, the kfd_iommu.c file is indeed
built but does not work:
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_bind_process_to_device':
kfd_iommu.c:(.text+0x516): undefined reference to `amd_iommu_bind_pasid'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_unbind_process':
kfd_iommu.c:(.text+0x691): undefined reference to `amd_iommu_unbind_pasid'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_suspend':
kfd_iommu.c:(.text+0x966): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0x97f): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0x9a4): undefined reference to `amd_iommu_free_device'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_resume':
kfd_iommu.c:(.text+0xa9a): undefined reference to `amd_iommu_init_device'
x86_64-linux-ld: kfd_iommu.c:(.text+0xadc): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xaff): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xc72): undefined reference to `amd_iommu_bind_pasid'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe08): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe26): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe42): undefined reference to `amd_iommu_free_device'
Use IS_REACHABLE to only build IOMMU-V2 support if the amd_iommu symbols
are reachable by the amdkfd driver. Output a warning if they are not,
because that may not be what the user was expecting.
Fixes:
64d1c3a43a6f ("drm/amdkfd: Centralize IOMMUv2 code and make it conditional")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 14 Dec 2020 11:53:31 +0000 (12:53 +0100)]
media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs()
[ Upstream commit
ba11bbf303fafb33989e95473e409f6ab412b18d ]
The "s3a_buf" is freed along with all the other items on the
"asd->s3a_stats" list. It leads to a double free and a use after free.
Link: https://lore.kernel.org/linux-media/X9dSO3RGf7r0pq2k@mwanda
Fixes:
ad85094b293e ("Revert "media: staging: atomisp: Remove driver"")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Wed, 7 Oct 2020 12:16:28 +0000 (14:16 +0200)]
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
[ Upstream commit
9baa3d64e8e2373ddd11c346439e5dfccb2cbb0d ]
There a 3 array for-loops that don't check the upper bounds of the
index into arrays and this may lead to potential out-of-bounds
reads. Fix this by adding array size upper bounds checks to be
full safe.
Addresses-Coverity: ("Out-of-bounds read")
Link: https://lore.kernel.org/linux-media/20201007121628.20676-1-colin.king@canonical.com
Fixes:
333829110f1d ("[media] m88rs6000t: add new dvb-s/s2 tuner for integrated chip M88RS6000")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Souptick Joarder [Sun, 27 Sep 2020 15:08:04 +0000 (17:08 +0200)]
media: atomisp: Fixed error handling path
[ Upstream commit
16a5dcf7fbc2f5cd10c1e6264262bfa3832fb7d5 ]
Inside alloc_user_pages() based on flag value either pin_user_pages()
or get_user_pages_fast() will be called. However, these API might fail.
But free_user_pages() called in error handling path doesn't bother
about return value and will try to unpin bo->pgnr pages, which is
incorrect.
Fix this by passing the page_nr to free_user_pages(). If page_nr > 0
pages will be unpinned based on bo->mem_type. This will also take care
of non error handling path.
allocation")
Link: https://lore.kernel.org/linux-media/1601219284-13275-1-git-send-email-jrdr.linux@gmail.com
Fixes:
14a638ab96c5 ("media: atomisp: use pin_user_pages() for memory
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Wed, 2 Sep 2020 16:58:52 +0000 (18:58 +0200)]
media: [next] staging: media: atomisp: fix memory leak of object flash
[ Upstream commit
6045b01dd0e3cd3759eafe7f290ed04c957500b1 ]
In the case where the call to lm3554_platform_data_func returns an
error there is a memory leak on the error return path of object
flash. Fix this by adding an error return path that will free
flash and rename labels fail2 to fail3 and fail1 to fail2.
Link: https://lore.kernel.org/linux-media/20200902165852.201155-1-colin.king@canonical.com
Fixes:
9289cdf39992 ("staging: media: atomisp: Convert to GPIO descriptors")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Ying [Thu, 11 Mar 2021 05:53:47 +0000 (06:53 +0100)]
media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30
[ Upstream commit
c451ee146d449bbe39835fc3d9007b7f06332415 ]
The media bus bit width of MEDIA_BUS_FMT_RGB101010_1X30 is 30.
So, 'Bit31' and 'Bit30' cells for the 'MEDIA_BUS_FMT_RGB101010_1X30'
row should be spaces instead of '0's.
Fixes:
54f38fcae536 ("media: docs: move uAPI book to userspace-api/media")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Mon, 8 Mar 2021 12:28:02 +0000 (13:28 +0100)]
media: m88ds3103: fix return value check in m88ds3103_probe()
[ Upstream commit
e61f9ea271933d987ab895c689fa37744f6fc27f ]
In case of error, the function i2c_new_dummy_device() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes:
e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>