r8169: improve rtl8169_start_xmit

Improve the following in rtl8169_start_xmit:
- tp->cur_tx can be accessed in parallel by rtl_tx(), therefore
  annotate the race by using WRITE_ONCE
- avoid checking stop_queue a second time by moving the doorbell check
- netif_stop_queue() uses atomic operation set_bit() that includes a
  full memory barrier on some platforms, therefore use
  smp_mb__after_atomic to avoid overhead

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/80085451-3eaf-507a-c7c0-08d607c46fbc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: xfrm: use core API for updating/providing stats

Commit d3fd65484c781 ("net: core: add dev_sw_netstats_tx_add") has added
function "dev_sw_netstats_tx_add()" to update net device per-cpu TX
stats.

Use this function instead of own code.

While on it, remove xfrmi_get_stats64() and replace it with
dev_get_tstats64().

Signed-off-by: Lev Stipakov <lev@openvpn.net>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20201113215939.147007-1-lev@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: openvswitch: use core API to update/provide stats

Commit d3fd65484c781 ("net: core: add dev_sw_netstats_tx_add") has added
function "dev_sw_netstats_tx_add()" to update net device per-cpu TX
stats.

Use this function instead of own code.

While on it, remove internal_get_stats() and replace it
with dev_get_tstats64().

Signed-off-by: Lev Stipakov <lev@openvpn.net>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20201113215336.145998-1-lev@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlxsw-preparations-for-nexthop-objects-support-part-1-2'

Ido Schimmel says:

====================
mlxsw: Preparations for nexthop objects support - part 1/2

This patch set contains small and non-functional changes aimed at making
it easier to support nexthop objects in mlxsw. Follow up patches can be
found here [1].

Patches #1-#4 add a type field to the nexthop group struct instead of
the existing protocol field. This will be used later on to add a nexthop
object type, which can contain both IPv4 and IPv6 nexthops.

Patches #5-#7 move the IPv4 FIB info pointer (i.e., 'struct fib_info')
from the nexthop group struct to the route. The pointer will not be
available when the nexthop group is a nexthop object, but it needs to be
accessible to routes regardless.

Patch #8 is the biggest change, but it is an entirely cosmetic change
and should therefore be easy to review. The motivation and the change
itself are explained in detail in the commit message.

Patches #9-#12 perform small changes so that two functions that are
currently split between IPv4 and IPv6 could be consolidated in patches

Patch #15 removes an outdated comment.

[1] https://github.com/idosch/linux/tree/submit/nexthop_objects
====================

Link: https://lore.kernel.org/r/20201113160559.22148-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Remove outdated comment

Since commit 21151f64a458 ("mlxsw: Add new FIB entry type for reject
routes") this comment is no longer correct. Remove it.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Consolidate mlxsw_sp_nexthop{4, 6}_type_fini()

The two functions are identical, so consolidate them to
mlxsw_sp_nexthop_type_fini().

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Consolidate mlxsw_sp_nexthop{4, 6}_type_init()

The two functions are now identical, so consolidate them to
mlxsw_sp_nexthop_type_init().

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Remove unused argument from mlxsw_sp_nexthop6_type_init()

Remove it as it is unused.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Pass nexthop netdev to mlxsw_sp_nexthop4_type_init()

Instead of passing the nexthop and resolving the nexthop netdev from it,
pass the nexthop netdev directly.

This will later allow us to consolidate code paths between IPv4 and IPv6
code.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Pass nexthop netdev to mlxsw_sp_nexthop6_type_init()

Instead of passing the route and resolving the nexthop netdev from it,
pass the nexthop netdev directly.

This will later allow us to consolidate code paths between IPv4 and IPv6
code.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_ipip: Remove overlay protocol from can_offload() callback

The overlay protocol (i.e., IPv4/IPv6) that is being encapsulated has
no impact on whether a certain IP tunnel can be offloaded or not. Only
the underlay protocol matters.

Therefore, remove the unused overlay protocol parameter from the
callback.

This will later allow us to consolidate code paths between IPv4 and IPv6
code.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Split nexthop group configuration to a different struct

Currently, the individual nexthops member in the group and attributes of
the group (e.g., its type) are stored in the same struct (i.e., 'struct
mlxsw_sp_nexthop_group'). This is fine since the individual nexthops
cannot change during the lifetime of the group.

With nexthop objects this is no longer the case. An existing nexthop
group can be replaced to use a new set of nexthops. Creating a new
struct whenever a group is replaced entails replacing the group pointer
of all the routes (i.e., 'struct mlxsw_sp_fib_entry') using the group.

Avoid this inefficient step by splitting the nexthop group configuration
to a different struct (i.e., 'struct mlxsw_sp_nexthop_group_info').
When a nexthop group is replaced a new group info struct is created and
the individual rotues do not need to be touched.

Illustration after the change:

  mlxsw_sp_fib_entry    mlxsw_sp_nexthop_group    mlxsw_sp_nexthop_group_info
+-------------------+  +----------------------+  +---------------------------+
| nh_group;         +--> nhgi;                +-->                           |
|                   |  |                      |  |                           |
+-------------------+  +----------------------+  +---------------------------+

No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Move IPv4 FIB info into a union in nexthop group struct

Instead of storing the FIB info as 'priv' when the nexthop group
represents an IPv4 nexthop group, simply store it as a FIB info with a
proper comment.

When nexthop objects are supported, this field will become a union with
the nexthop object's identifier.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Remove unused field 'prio' from IPv4 FIB entry struct

Not used anywhere.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Store FIB info in route

When needed, IPv4 routes fetch the FIB info (i.e., 'struct fib_info')
from their associated nexthop group. This will not work when the nexthop
group represents a nexthop object (i.e., 'struct nexthop'), as it will
only have access to the nexthop's identifier.

Instead, store the FIB info in the route itself.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Associate neighbour table with nexthop instead of group

As explained in the previous patch, nexthop objects can have both IPv4
and IPv6 nexthops in the same group. Therefore, move the neighbour table
to be a property of the nexthop instead of the nexthop group.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Use nexthop group type in hash table key

Both IPv4 and IPv6 nexthop groups are hashed in the same table. The
protocol field is used to indicate how the hash should be computed for
each group.

When nexthop group objects are supported, the hash will be computed for
them based on the nexthop identifier.

To differentiate between all the nexthop group types, encode the type of
the group in the key instead of the protocol.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Add nexthop group type field

Currently, the type (i.e., IPv4/IPv6) of the nexthop group is derived
from the neighbour table associated with the group.

This is problematic when nexthop objects are taken into account, as a
nexthop group object can contain both IPv4 and IPv6 nexthops.

Instead, add a new field that indicates the type of the group and
initialize it during the group's creation. Currently, the types are IPv4
('struct fib_info') and IPv6 ('struct fib6_info'). In the future another
type will be added for nexthop objects ('struct nexthop').

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Compare key with correct object type

When comparing a key with a nexthop group in rhastable's obj_cmpfn()
callback, make sure that the key and nexthop group are of the same type
(i.e., IPv4 / IPv6).

The bug is not currently visible because IPv6 nexthop groups do not
populate the FIB info pointer and IPv4 nexthop groups do not set the
ifindex for the individual nexthops.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: refined function nci_hci_resp_received

We don't use the parameter result actually, so better to remove it and
skip a gcc warning for unused variable.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Link: https://lore.kernel.org/r/1605239517-49707-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet: unexport udp{4|6}_lib_lookup_skb()

These functions do not need to be exported.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201113113553.3411756-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp-avoid-indirect-call-in-__sk_stream_memory_free'

Eric Dumazet says:

====================
tcp: avoid indirect call in __sk_stream_memory_free()

Small improvement for CONFIG_RETPOLINE=y, when dealing with TCP sockets.
====================

Link: https://lore.kernel.org/r/20201113150809.3443527-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: avoid indirect call to tcp_stream_memory_free()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: uninline tcp_stream_memory_free()

Both IPv4 and IPv6 needs it via a function pointer.
Following patch will avoid the indirect call.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

IPv4: RTM_GETROUTE: Add RTA_ENCAP to result

This patch adds an IPv4 routes encapsulation attribute
to the result of netlink RTM_GETROUTE requests
(e.g. ip route get 192.0.2.1).

Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201113085517.GA1307262@tws
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'ionic-updates'

Shannon Nelson says:

====================
ionic updates

These updates are a bit of code cleaning and a minor
bit of performance tweaking.

v3: convert ionic_lif_quiesce() to void
v2: added void cast on call to ionic_lif_quiesce()
    lowered batching threshold
    added patch to flatten calls to ionic_lif_rx_mode
    added patch to change from_ndo to can_sleep
====================

Link: https://lore.kernel.org/r/20201112182208.46770-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: useful names for booleans

With a few more uses of true and false in function calls, we
need to give them some useful names so we can tell from the
calling point what we're doing.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: change set_rx_mode from_ndo to can_sleep

Instead of having two different ways of expressing the same
sleepability concept, using opposite logic, we can rework the
from_ndo to can_sleep for a more consistent usage.

Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: flatten calls to ionic_lif_rx_mode

The _ionic_lif_rx_mode() is only used once and really doesn't
need to be broken out.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: use mc sync for multicast filters

We should be using the multicast sync routines for the multicast
filters.  Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().

Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: batch rx buffer refilling

We don't need to refill the rx descriptors on every napi
if only a few were handled.  Waiting until we can batch up
a few together will save us a few Rx cycles.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: add lif quiesce

After the queues are stopped, expressly quiesce the lif.
This assures that even if the queues were in an odd state,
the firmware will close up everything cleanly.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: check for link after netdev registration

Request a link check as soon as the netdev is registered rather
than waiting for the watchdog to go off in order to get the
interface operational a little more quickly.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: start queues before announcing link up

Change the order of operations in the link_up handling to be
sure that the queues are up and ready before we announce that
the link is up.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: macb: Fix passing zero to 'PTR_ERR'

Check PTR_ERR with IS_ERR to fix this.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201112144936.54776-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: remove unused function ipv6_skb_idev()

Commit bdb7cc643fc9 ("ipv6: Count interface receive statistics on the
ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since
then, ipv6_skb_idev() is unused and make CC=clang W=1 warns:

  net/ipv6/exthdrs.c:909:33:
    warning: unused function 'ipv6_skb_idev' [-Wunused-function]

So, remove this unused function and a -Wunused-function warning.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201113135012.32499-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-11-14

1) Add BTF generation for kernel modules and extend BTF infra in kernel
   e.g. support for split BTF loading and validation, from Andrii Nakryiko.

2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
   on inlined branch conditions, from Alexei Starovoitov.

3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.

4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
   infra, from Martin KaFai Lau.

5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
   XDP_REDIRECT path, from Lorenzo Bianconi.

6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
   context, from Song Liu.

7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
   for different target archs on same source tree, from Jean-Philippe Brucker.

8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.

9) Move functionality from test_tcpbpf_user into the test_progs framework so it
   can run in BPF CI, from Alexander Duyck.

10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.

Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.

  [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
      https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
  net: mlx5: Add xdp tx return bulking support
  net: mvpp2: Add xdp tx return bulking support
  net: mvneta: Add xdp tx return bulking support
  net: page_pool: Add bulk support for ptr_ring
  net: xdp: Introduce bulking for xdp tx return path
  bpf: Expose bpf_d_path helper to sleepable LSM hooks
  bpf: Augment the set of sleepable LSM hooks
  bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Rename some functions in bpf_sk_storage
  bpf: Folding omem_charge() into sk_storage_charge()
  selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
  selftests/bpf: Add skb_pkt_end test
  bpf: Support for pointers beyond pkt_end.
  tools/bpf: Always run the *-clean recipes
  tools/bpf: Add bootstrap/ to .gitignore
  bpf: Fix NULL dereference in bpf_task_storage
  tools/bpftool: Fix build slowdown
  tools/runqslower: Build bpftool using HOSTCC
  tools/runqslower: Enable out-of-tree build
  ...
====================

Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mscc: Add PTP support for 2 more VSC PHYs

Add VSC8572 and VSC8574 in the PTP configuration
as they also support PTP.

The relevant datasheets can be found here:
  - VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572
  - VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20201112092250.914079-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'xdp-redirect-bulk'

Lorenzo Bianconi says:

====================
XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually
run inside the driver NAPI tx completion loop.

Convert mvneta, mvpp2 and mlx5 drivers to xdp_return_frame_bulk APIs.

More details on benchmarks run on mlx5 can be found here:
https://github.com/xdp-project/xdp-project/blob/master/areas/mem/xdp_bulk_return01.org

Changes since v5:
- do not keep looping over ptr_ring if the cache is full but release leftover
  pages running page_pool_return_page

Changes since v4:
- fix comments
- introduce xdp_frame_bulk_init utility routine
- compiler annotations for I-cache code layout
- move rcu_read_lock outside fast-path
- mlx5 xdp bulking code optimization

Changes since v3:
- align DEV_MAP_BULK_SIZE to XDP_BULK_QUEUE_SIZE
- refactor page_pool_put_page_bulk to avoid code duplication

Changes since v2:
- move mvneta changes in a dedicated patch

Changes since v1:
- improve comments
- rework xdp_return_frame_bulk routine logic
- move count and xa fields at the beginning of xdp_frame_bulk struct
- invert logic in page_pool_put_page_bulk for loop
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>

net: mlx5: Add xdp tx return bulking support

Convert mlx5 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 8.9Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 10.2Mpps

Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/250460319fd868b7b5668fc1deca74dd42813a90.1605267335.git.lorenzo@kernel.org

net: mvpp2: Add xdp tx return bulking support

Convert mvpp2 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 1.79Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 1.93Mpps

Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Matteo Croce <mcroce@microsoft.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/0b38c295e58e8ce251ef6b4e2187a2f457f9f7a3.1605267335.git.lorenzo@kernel.org

net: mvneta: Add xdp tx return bulking support

Convert mvneta driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 275Kpps
XDP_REDIRECT (upstream codepath + bulking APIs): 284Kpps

Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/9af8014006d022fc0fec78cdaa71beb56999750d.1605267335.git.lorenzo@kernel.org

net: page_pool: Add bulk support for ptr_ring

Introduce the capability to batch page_pool ptr_ring refill since it is
usually run inside the driver NAPI tx completion loop.

Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/bpf/08dd249c9522c001313f520796faa777c4089e1c.1605267335.git.lorenzo@kernel.org

net: xdp: Introduce bulking for xdp tx return path

XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually run
inside the driver NAPI tx completion loop.
The bulk queue size is set to 16 to be aligned to how
XDP_REDIRECT bulking works. The bulk is flushed when
it is full or when mem.id changes.
xdp_frame_bulk is usually stored/allocated on the function
call-stack to avoid locking penalties.
Current implementation considers only page_pool memory model.

Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/bpf/e190c03eac71b20c8407ae0fc2c399eda7835f49.1605267335.git.lorenzo@kernel.org

net: stmmac: platform: use optional clk/reset get APIs

Use the devm_reset_control_get_optional() and devm_clk_get_optional()
rather than open coding them.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201112092606.5173aa6f@xhacker.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: improve rtl_tx

We can simplify the for() condition and eliminate variable tx_left.
The change also considers that tp->cur_tx may be incremented by a
racing rtl8169_start_xmit().
In addition replace the write to tp->dirty_tx and the following
smp_mb() with an equivalent call to smp_store_mb(). This implicitly
adds a WRITE_ONCE() to the write.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/c2e19e5e-3d3f-d663-af32-13c3374f5def@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: use READ_ONCE in rtl_tx_slots_avail

tp->dirty_tx and tp->cur_tx may be changed by a racing rtl_tx() or
rtl8169_start_xmit(). Use READ_ONCE() to annotate the races and ensure
that the compiler doesn't use cached values.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/5676fee3-f6b4-84f2-eba5-c64949a371ad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-ipa-two-fixes'

Alex Elder says:

====================
net: ipa: two fixes

This small series makes two fixes to the IPA code:
  - While reviewing something else I found that one of the resource
    limits on the SDM845 used the wrong value.  The first patch
    fixes this.  The correct value allocates more resources of this
    type for IPA to use, and otherwise does not change behavior.
  - When the IPA-resident microcontroller starts up it generates an
    event, which triggers an AP interrupt.  The event merely
    provides some information for logging, which we don't support.
    We already ignore the event, and that's harmless.  So this
    patch explicitly ignores it rather than issuing a warning when
    it occurs.
====================

Link: https://lore.kernel.org/r/20201112121157.19784-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: ignore the microcontroller log event

The IPA-resident microcontroller has the ability to log various
activity in an area of IPA shared memory.  When the microcontroller
starts it generates an event to the AP to provide information about
the log.

We don't support reading this log, and we can safely ignore the
event.  So do that rather than treating the log info event we
receive as "unsupported."

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: fix source packet contexts limit

I have discovered that the maximum number of source packet contexts
configured for SDM845 is incorrect.  Fix this error.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'sfc-further-ef100-encap-tso-features'

Edward Cree says:

====================
sfc: further EF100 encap TSO features

This series adds support for GRE and GRE_CSUM TSO on EF100 NICs, as
 well as improving the handling of UDP tunnel TSO.
====================

Link: https://lore.kernel.org/r/eda2de73-edf2-8b92-edb9-099ebda09ebc@solarflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfc: support GRE TSO on EF100

We can treat SKB_GSO_GRE almost exactly the same as UDP tunnels, except
 that we don't want to edit the outer UDP len (as there isn't one).
For SKB_GSO_GRE_CSUM, we have to use GSO_PARTIAL as the device doesn't
 support offload of non-UDP outer L4 checksums.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

sfc: correctly support non-partial GSO_UDP_TUNNEL_CSUM on EF100

By asking the HW for the correct edits, we can make UDP tunnel TSO
 work without needing GSO_PARTIAL.  So don't specify it in our
 netdev->gso_partial_features.
However, retain GSO_PARTIAL support, as this will be used for other
 protocols later.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

sfc: extend bitfield macros to 19 fields

Our TSO descriptors got even more fussy.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

Merge branch 'net-ipa-gsi-register-consolidation'

Alex Elder says:

====================
net: ipa: GSI register consolidation

This series rearranges and consolidates some GSI register
definitions.  Its general aim is to make things more
consistent, by:
  - Using enumerated types to define the values held in GSI register
    fields
  - Defining field values in "gsi_reg.h", together with the
    definition of the register (and field) that holds them
  - Format enumerated type members consistently, with hexidecimal
    numeric values, and assignments aligned on the same column

There is one checkpatch "CHECK" warning requesting a blank line; I
ignored that because my intention was to group certain definitions.
====================

Link: https://lore.kernel.org/r/20201110215922.23514-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: use enumerated types for GSI field values

Replace constants defined with an "_FVAL" suffix with values defined
in enumerated types, to be consistent with other usage in the driver.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: move GSI command opcode values into "gsi_reg.h"

The gsi_ch_cmd_opcode, gsi_evt_cmd_opcode, and gsi_generic_cmd_opcode
enumerated types are values that fields in the GSI command registers
can take on.  Move their definitions out of "gsi.c" and into "gsi_reg.h",
alongside the definition of registers they are associated with.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: move GSI error values into "gsi_reg.h"

The gsi_err_code and gsi_err_type enumerated types are values that
fields in the GSI ERROR_LOG register can take on.  Move their
definitions out of "gsi.c" and into "gsi_reg.h", alongside the
definition of the ERROR_LOG register offset and field symbols.

Drop the "_ERR" suffix in the names of the gsi_err_code members.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: move channel type values into "gsi_reg.h"

The gsi_channel_type enumerated type define values used for the
channel type/protocol for event rings and channels.  Move its
definition out of "gsi.c" and into "gsi_reg.h", alongside the
definition of the CH_C_CNTXT_0 register offset and its fields.
Add a comment near the definition of the EV_CH_E_CNTXT_0 register
indicating this type is used for its EV_CHTYPE field.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: use common value for channel type and protocol

The numeric values that represent the event ring channel type are
identical to the values that represent the matching protocol used
for a channel.  Use a new gsi_channel_type enumerated type to
represent the values programmed for both cases, using "CHANNEL_TYPE"
in member names in place of "EVT_CHTYPE" and "CHANNEL_PROTOCOL".

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: define GSI interrupt types with enums

Define the GSI global interrupt types with an enumerated type whose
values are the bit positions representing the global interrupt types.

Similarly, define the GSI general interrupt types with an enumerated
type whose values are the bit positions of general interrupt types.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tipc: fix -Wstringop-truncation warnings

Replace strncpy() with strscpy(), fixes the following warning:

In function 'bearer_name_validate',
    inlined from 'tipc_enable_bearer' at net/tipc/bearer.c:246:7:
net/tipc/bearer.c:141:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  strncpy(name_copy, name, TIPC_MAX_BEARER_NAME);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Link: https://lore.kernel.org/r/20201112093442.8132-1-wenlin.kang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-next-for-net-next-2020-11-13' of git://git./linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Some updates:
 * injection/radiotap updates for new test capabilities
 * remove WDS support - even years ago when we turned
   it off by default it was already basically unusable
 * support for HE (802.11ax) rates for beacons
 * support for some vendor-specific HE rates
 * many other small features/cleanups

* tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits)
  nl80211: fix kernel-doc warning in the new SAE attribute
  cfg80211: remove WDS code
  mac80211: remove WDS-related code
  rt2x00: remove WDS code
  b43legacy: remove WDS code
  b43: remove WDS code
  carl9170: remove WDS code
  ath9k: remove WDS code
  wireless: remove CONFIG_WIRELESS_WDS
  mac80211: assure that certain drivers adhere to DONT_REORDER flag
  mac80211: don't overwrite QoS TID of injected frames
  mac80211: adhere to Tx control flag that prevents frame reordering
  mac80211: add radiotap flag to assure frames are not reordered
  mac80211: save HE oper info in BSS config for mesh
  cfg80211: add support to configure HE MCS for beacon rate
  nl80211: fix beacon tx rate mask validation
  nl80211/cfg80211: fix potential infinite loop
  cfg80211: Add support to calculate and report 4096-QAM HE rates
  cfg80211: Add support to configure SAE PWE value to drivers
  ieee80211: Add definition for WFA DPP
  ...
====================

Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf: Expose bpf_d_path helper to sleepable LSM hooks

Sleepable hooks are never called from an NMI/interrupt context, so it
is safe to use the bpf_d_path helper in LSM programs attaching to these
hooks.

The helper is not restricted to sleepable programs and merely uses the
list of sleepable hooks as the initial subset of LSM hooks where it can
be used.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201113005930.541956-3-kpsingh@chromium.org

bpf: Augment the set of sleepable LSM hooks

Update the set of sleepable hooks with the ones that do not trigger
a warning with might_fault() when exercised with the correct kernel
config options enabled, i.e.

DEBUG_ATOMIC_SLEEP=y
LOCKDEP=y
PROVE_LOCKING=y

This means that a sleepable LSM eBPF program can be attached to these
LSM hooks. A new helper method bpf_lsm_is_sleepable_hook is added and
the set is maintained locally in bpf_lsm.c

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201113005930.541956-2-kpsingh@chromium.org

Merge branch 'bpf: Enable bpf_sk_storage for FENTRY/FEXIT/RAW_TP'

Martin KaFai says:

====================

This set is to allow the FENTRY/FEXIT/RAW_TP tracing program to use
bpf_sk_storage.  The first two patches are a cleanup.  The last patch is
tests.  Patch 3 has the required kernel changes to
enable bpf_sk_storage for FENTRY/FEXIT/RAW_TP.

Please see individual patch for details.

v2:
- Rename some of the function prefix from sk_storage to bpf_sk_storage
- Use prefix check instead of substr check
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP

This patch tests storing the task's related info into the
bpf_sk_storage by fentry/fexit tracing at listen, accept,
and connect.  It also tests the raw_tp at inet_sock_set_state.

A negative test is done by tracing the bpf_sk_storage_free()
and using bpf_sk_storage_get() at the same time.  It ensures
this bpf program cannot load.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201112211320.2587537-1-kafai@fb.com

bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP

This patch enables the FENTRY/FEXIT/RAW_TP tracing program to use
the bpf_sk_storage_(get|delete) helper, so those tracing programs
can access the sk's bpf_local_storage and the later selftest
will show some examples.

The bpf_sk_storage is currently used in bpf-tcp-cc, tc,
cg sockops...etc which is running either in softirq or
task context.

This patch adds bpf_sk_storage_get_tracing_proto and
bpf_sk_storage_delete_tracing_proto.  They will check
in runtime that the helpers can only be called when serving
softirq or running in a task context.  That should enable
most common tracing use cases on sk.

During the load time, the new tracing_allowed() function
will ensure the tracing prog using the bpf_sk_storage_(get|delete)
helper is not tracing any bpf_sk_storage*() function itself.
The sk is passed as "void *" when calling into bpf_local_storage.

This patch only allows tracing a kernel function.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201112211313.2587383-1-kafai@fb.com

bpf: Rename some functions in bpf_sk_storage

Rename some of the functions currently prefixed with sk_storage
to bpf_sk_storage.  That will make the next patch have fewer
prefix check and also bring the bpf_sk_storage.c to a more
consistent function naming.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201112211307.2587021-1-kafai@fb.com

bpf: Folding omem_charge() into sk_storage_charge()

sk_storage_charge() is the only user of omem_charge().
This patch simplifies it by folding omem_charge() into
sk_storage_charge().

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201112211301.2586255-1-kafai@fb.com

Merge https://git./linux/kernel/git/netdev/net

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'bpf-ptrs-beyond-pkt-end'

Alexei Starovoitov says:

====================
v1->v2:
- removed set-but-unused variable.
- added Jiri's Tested-by.

In some cases LLVM uses the knowledge that branch is taken to optimze the code
which causes the verifier to reject valid programs.
Teach the verifier to recognize that
r1 = skb->data;
r1 += 10;
r2 = skb->data_end;
if (r1 > r2) {
  here r1 points beyond packet_end and subsequent
  if (r1 > r2) // always evaluates to "true".
}
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

selftests/bpf: Add asm tests for pkt vs pkt_end comparison.

Add few assembly tests for packet comparison.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201111031213.25109-4-alexei.starovoitov@gmail.com

selftests/bpf: Add skb_pkt_end test

Add a test that currently makes LLVM generate assembly code:

$ llvm-objdump -S skb_pkt_end.o
0000000000000000 <main_prog>:
;  if (skb_shorter(skb, ETH_IPV4_TCP_SIZE))
       0: 61 12 50 00 00 00 00 00 r2 = *(u32 *)(r1 + 80)
       1: 61 14 4c 00 00 00 00 00 r4 = *(u32 *)(r1 + 76)
       2: bf 43 00 00 00 00 00 00 r3 = r4
       3: 07 03 00 00 36 00 00 00 r3 += 54
       4: b7 01 00 00 00 00 00 00 r1 = 0
       5: 2d 23 02 00 00 00 00 00 if r3 > r2 goto +2 <LBB0_2>
       6: 07 04 00 00 0e 00 00 00 r4 += 14
;  if (skb_shorter(skb, ETH_IPV4_TCP_SIZE))
       7: bf 41 00 00 00 00 00 00 r1 = r4
0000000000000040 <LBB0_2>:
       8: b4 00 00 00 ff ff ff ff w0 = -1
;  if (!(ip = get_iphdr(skb)))
       9: 2d 23 05 00 00 00 00 00 if r3 > r2 goto +5 <LBB0_6>
;  proto = ip->protocol;
      10: 71 12 09 00 00 00 00 00 r2 = *(u8 *)(r1 + 9)
;  if (proto != IPPROTO_TCP)
      11: 56 02 03 00 06 00 00 00 if w2 != 6 goto +3 <LBB0_6>
;  if (tcp->dest != 0)
      12: 69 12 16 00 00 00 00 00 r2 = *(u16 *)(r1 + 22)
      13: 56 02 01 00 00 00 00 00 if w2 != 0 goto +1 <LBB0_6>
;  return tcp->urg_ptr;
      14: 69 10 26 00 00 00 00 00 r0 = *(u16 *)(r1 + 38)
0000000000000078 <LBB0_6>:
; }
      15: 95 00 00 00 00 00 00 00 exit

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201111031213.25109-3-alexei.starovoitov@gmail.com

bpf: Support for pointers beyond pkt_end.

This patch adds the verifier support to recognize inlined branch conditions.
The LLVM knows that the branch evaluates to the same value, but the verifier
couldn't track it. Hence causing valid programs to be rejected.
The potential LLVM workaround: https://reviews.llvm.org/D87428
can have undesired side effects, since LLVM doesn't know that
skb->data/data_end are being compared. LLVM has to introduce extra boolean
variable and use inline_asm trick to force easier for the verifier assembly.

Instead teach the verifier to recognize that
r1 = skb->data;
r1 += 10;
r2 = skb->data_end;
if (r1 > r2) {
  here r1 points beyond packet_end and
  subsequent
  if (r1 > r2) // always evaluates to "true".
}

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201111031213.25109-2-alexei.starovoitov@gmail.com

selftests: set conf.all.rp_filter=0 in bareudp.sh

When working on the rp_filter problem, I didn't realise that disabling
it on the network devices didn't cover all cases: rp_filter could also
be enabled globally in the namespace, in which case it would drop
packets, even if the net device has rp_filter=0.

Fixes: 1ccd58331f6f ("selftests: disable rp_filter when testing bareudp")
Fixes: bbbc7aa45eef ("selftests: add test script for bareudp tunnels")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/f2d459346471f163b239aa9d63ce3e2ba9c62895.1605107012.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlxsw-spectrum-prepare-for-xm-implementation-prefix-insertion-and-removal'

Ido Schimmel says:

====================
mlxsw: spectrum: Prepare for XM implementation - prefix insertion and removal

Jiri says:

This is a preparation patchset for follow-up support of boards with
extended mezzanine (XM), which is going to allow extended (scale-wise)
router offload.

XM requires a separate PRM register named XMDR to be used instead of
RALUE to insert/update/remove FIB entries. Therefore, this patchset
extends the previously introduces low-level ops to be able to have
XM-specific FIB entry config implementation.

Currently the existing original RALUE implementation is moved to "basic"
low-level ops.

Unlike legacy router, insertion/update/removal of FIB entries into XM
could be done in bulks up to 4 items in a single PRM register write.
That is why this patchset implements "an op context", that allows the
future XM ops implementation to squash multiple FIB events to single
register write. For that, the way in which the FIB events are processed
by the work queue has to be changed.

The conversion from 1:1 FIB event - work callback call to event queue is
implemented in patch #3.

Patch #4 introduces "an op context" that will allow in future to squash
multiple FIB events into one XMDR register write. Patch #12 converts it
from stack to be allocated per instance.

Existing RALUE manipulations are pushed to ops in patch #10.

Patch #13 is introducing a possibility for low-level implementation to
have per FIB entry private memory.

The rest of the patches are either cosmetics or smaller preparations.
====================

Link: https://lore.kernel.org/r/20201110094900.1920158-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Introduce FIB entry update op

Follow-up patchset introducing XMDR implementation is going to need
to distinguish write and update ops. Therefore introduce "update op"
and call "write op" only when new FIB entry is inserted.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Track FIB entry committed state and skip uncommitted on delete

In case bulking is used, the entry that was previously added may not
be yet committed to the HW as it waits in the queue for bulk send. For
such entries, skip the deletion.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Introduce fib_entry priv for low-level ops

Prepare for the low-level ops that need to store some data alongside
the fib_entry and introduce a per-fib_entry priv for ll ops.
The priv is reference counted as in the follow-up patch it is going
to be saved in pack() function and used later on in commit() even in
case the related fib_entry gets freed in the middle.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Have FIB entry op context allocated for the instance

Get the max size needed for FIB entry op context and allocate it once
for the instance. Use it repeatedly from the scheduled work.
By this, allow to extend the context to hold more data than it is wise
to do when it was on the stack. Make sure to signalize that the context
needs to be initialized in case families of subsequent FIB entries differ.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Prepare work context for possible bulking

For XMDR register it is possible to carry multiple FIB entry
operations in a single write. However the FW does not restrict mixing
the types of operations, make the code easier and indicate the bulking
is ok only in case the bulk contains FIB operations of the same family
and event.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum: Push RALUE packing and writing into low-level router ops

With follow-up introduction of XM implementation, XMDR register is
going to be optionally used instead of RALUE register. Push the RALUE
packing helpers and write call into low-level router ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Use RALUE pack helper from abort function

Unify the RALUE register payload packing and use the
__mlxsw_sp_fib_entry_ralue_pack() helper from
__mlxsw_sp_router_set_abort_trap().

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: reg: Allow to pass NULL pointer to mlxsw_reg_ralue_pack4/6()

In preparation for the change that is going to be done in the next
patch, allow to pass NULL pointer to mlxsw_reg_ralue_pack4() and
mlxsw_reg_ralue_pack6() helpers.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Pass destination IP as a pointer to mlxsw_reg_ralue_pack4()

Instead of passing destination IP as a u32 value, pass it as pointer to
u32. Avoid using local variable for the pointer store.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum: Export RALUE pack helper and use it from IPIP

As the RALUE packing is going to be put into op, make the user from
IPIP code use the same helper as the router code does.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Push out RALUE pack into separate helper

As the RALUE packing is going to be pushed into an op, in preparation
for that push the code into a separate function in the meantime.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum: Propagate context from work handler containing RALUE payload

Currently, RALUE payload is defined locally in the function that is
calling the register write. With introduction of alternative register to
RALUE, XMDR, it has to be possible to put multiple FIB entry
operations into single register write.

So in order to prepare for that, have per-work entry operation context
and propagate it all the way down to the functions writing RALUE.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Introduce FIB event queue instead of separate works

Currently, every FIB event is queued-up as a separate work to be
processed. However, that allows to process only one FIB entry per work
callback.

In preparation of future XMDR register bulking of multiple FIB entries,
convert to FIB event queue. Implement this by a list_head, adding new
events to the end of the list in the FIB notify callback. That allows to
process multiple events from the list inside the work callback.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Use RALUE-independent op arg

Since the write/delete of FIB entry is going to be implemented by XMDR
register for XM implementation, introduce RALUE-independent enum for op
so the enum could be used in both RALUE and XMDR.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_router: Pass non-register proto enum to __mlxsw_sp_router_set_abort_trap()

Don't pass RALXX register enum and rather pass enum mlxsw_sp_l3proto
to __mlxsw_sp_router_set_abort_trap(). This is in preparation to fib
entry pack implementation by XMDR register.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: kcov: don't select SKB_EXTENSIONS when there is no NET

Fix kconfig warning when CONFIG_NET is not set/enabled:

WARNING: unmet direct dependencies detected for SKB_EXTENSIONS
  Depends on [n]: NET [=n]
  Selected by [y]:
  - KCOV [=y] && ARCH_HAS_KCOV [=y] && (CC_HAS_SANCOV_TRACE_PC [=y] || GCC_PLUGINS [=n])

Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201110175746.11437-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-switch-further-drivers-to-core-functionality-for-handling-per-cpu-byte-packet-counters'

Heiner Kallweit says:

====================
net: switch further drivers to core functionality for handling per-cpu byte/packet counters

Switch further drivers to core functionality for handling per-cpu
byte/packet counters. All changes are compile-tested only.
====================

Link: https://lore.kernel.org/r/5fbe3a1f-6625-eadc-b1c9-f76f78debb94@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: switch to dev_get_tstats64 and remove usbnet_get_stats64 alias

Replace usbnet_get_stats64() with new identical core function
dev_get_tstats64() in all users and remove usbnet_get_stats64().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

usbnet: switch to core handling of rx/tx byte/packet counters

Use netdev->tstats instead of a member of usbnet for storing a pointer
to the per-cpu counters. This allows us to use core functionality for
statistics handling.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qtnfmac: switch to core handling of rx/tx byte/packet counters

Use netdev->tstats instead of a member of qtnf_vif for storing a pointer
to the per-cpu counters. This allows us to use core functionality for
statistics handling.
The driver sets netdev->needs_free_netdev, therefore freeing the per-cpu
counters at the right point in time is a little bit tricky. Best option
seems to be to use the ndo_init/ndo_uninit callbacks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qmi_wwan: switch to core handling of rx/tx byte/packet counters

Use netdev->tstats instead of a member of qmimux_priv for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

IB/hfi1: switch to core handling of rx/tx byte/packet counters

Use netdev->tstats instead of a member of hfi1_ipoib_dev_priv for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipconfig: Avoid spurious blank lines in boot log

When dumping the name and NTP servers advertised by DHCP, a blank line
is emitted if either of the lists is empty. This can lead to confusing
issues such as the blank line getting flagged as warning. This happens
because the blank line is the result of pr_cont("\n") and that may see
its level corrupted by some other driver concurrently writing to the
console.

Fix this by making sure that the terminating newline is only emitted
if at least one entry in the lists was printed before.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201110073757.1284594-1-thierry.reding@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>