Matthew Auld [Mon, 27 Sep 2021 11:41:02 +0000 (12:41 +0100)]
drm/ttm: stop calling tt_swapin in vm_access
[ Upstream commit
f5d28856b89baab4232a9f841e565763fcebcdf9 ]
In commit:
commit
09ac4fcb3f255e9225967c75f5893325c116cdbe
Author: Felix Kuehling <Felix.Kuehling@amd.com>
Date: Thu Jul 13 17:01:16 2017 -0400
drm/ttm: Implement vm_operations_struct.access v2
we added the vm_access hook, where we also directly call tt_swapin for
some reason. If something is swapped-out then the ttm_tt must also be
unpopulated, and since access_kmap should also call tt_populate, if
needed, then swapping-in will already be handled there.
If anything, calling tt_swapin directly here would likely always fail
since the tt->pages won't yet be populated, or worse since the tt->pages
array is never actually cleared in unpopulate this might lead to a nasty
uaf.
Fixes:
09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927114114.152310-1-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Tue, 28 Sep 2021 11:00:47 +0000 (14:00 +0300)]
ath10k: sdio: Add missing BH locking around napi_schdule()
[ Upstream commit
019edd01d174ce4bb2e517dd332922514d176601 ]
On a i.MX-based board with a QCA9377 Wifi chip, the following errors
are seen after launching the 'hostapd' application:
hostapd /etc/wifi.conf
Configuration file: /etc/wifi.conf
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using interface wlan0 with hwaddr 00:1f:7b:31:04:a0 and ssid "thessid"
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
...
Fix this problem by adding the BH locking around napi-schedule(),
in the same way it was done in commit
e63052a5dd3c ("mlx5e: add
add missing BH locking around napi_schdule()").
Its commit log provides the following explanation:
"It's not correct to call napi_schedule() in pure process
context. Because we use __raise_softirq_irqoff() we require
callers to be in a context which will eventually lead to
softirq handling (hardirq, bh disabled, etc.).
With code as is users will see:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
"
Fixes:
cfee8793a74d ("ath10k: enable napi on RX path for sdio")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210824144339.2796122-1-festevam@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Tue, 28 Sep 2021 11:00:47 +0000 (14:00 +0300)]
ath10k: Fix missing frame timestamp for beacon/probe-resp
[ Upstream commit
e6dfbc3ba90cc2b619229be56b485f085a0a8e1c ]
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
Fixes:
5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629811733-7927-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 28 Sep 2021 14:15:13 +0000 (16:15 +0200)]
gve: DQO: avoid unused variable warnings
[ Upstream commit
1e0083bd0777e4a418a6710d9ee04b979cdbe5cc ]
The use of dma_unmap_addr()/dma_unmap_len() in the driver causes
multiple warnings when these macros are defined as empty, e.g.
in an ARCH=i386 allmodconfig build:
drivers/net/ethernet/google/gve/gve_tx_dqo.c: In function 'gve_tx_add_skb_no_copy_dqo':
drivers/net/ethernet/google/gve/gve_tx_dqo.c:494:40: error: unused variable 'buf' [-Werror=unused-variable]
494 | struct gve_tx_dma_buf *buf =
This is not how the NEED_DMA_MAP_STATE macros are meant to work,
as they rely on never using local variables or a temporary structure
like gve_tx_dma_buf.
Remote the gve_tx_dma_buf definition and open-code the contents
in all places to avoid the warning. This causes some rather long
lines but otherwise ends up making the driver slightly smaller.
Fixes:
a57e5de476be ("gve: DQO: Add TX path")
Link: https://lore.kernel.org/netdev/20210723231957.1113800-1-bcf@google.com/
Link: https://lore.kernel.org/netdev/20210721151100.2042139-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baochen Qiang [Tue, 28 Sep 2021 11:00:44 +0000 (14:00 +0300)]
ath11k: Fix memory leak in ath11k_qmi_driver_event_work
[ Upstream commit
72de799aa9e3e064b35238ef053d2f0a49db055a ]
The buffer pointed to by event is not freed in case
ATH11K_FLAG_UNREGISTERING bit is set, resulting in
memory leak, so fix it.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210913180246.193388-4-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pradeep Kumar Chitrapu [Tue, 28 Sep 2021 11:00:43 +0000 (14:00 +0300)]
ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status
[ Upstream commit
9d6ae1f5cf733c0e8d7f904c501fd015c4b9f0f4 ]
Frequency in rx status is being filled incorrectly in the 6 GHz band as
channel number received is invalid in this case which is causing packet
drops. So fix that.
Fixes:
5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path")
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210722102054.43419-2-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sriram R [Tue, 28 Sep 2021 09:05:40 +0000 (12:05 +0300)]
ath11k: Avoid race during regd updates
[ Upstream commit
1db2b0d0a39102238fcbf9092cefa65a710642e9 ]
Whenever ath11k is bootup with a user country already set, cfg80211
notifies this country info to ath11k soon after registration, where the
notification is sent to the firmware for fetching the rules of this user
country input.
Multiple race conditions could be seen in this scenario where a new
request is either lost as pointed in [1] or a new regd overwrites the
default regd provided by the firmware during bootup. Note that, the
default regd is used for intersection purpose and hence it should not be
overwritten.
The main reason as pointed by [1] is the usage of ATH11K_FLAG_REGISTERED
flag which is updated after completion of core registration, whereas the
reg notification from cfg80211 and wmi events for the corresponding
request can happen much before that. Since the ATH11K_FLAG_REGISTERED is
currently used to determine if the event containing reg rules belong to
default regd or for user request, there is a possibility of the default
regd getting overwritten.
Since the default reg rules will be received only once per pdev on
firmware load, the above flag based check can be replaced with a check
to see if default_regd is already set, so that we can now always update
the new_regd. Also if the new_regd is set, this will be always used to
update the reg rules for the registered phy.
[1] https://patchwork.kernel.org/project/linux-wireless/patch/1829665.1PRlr7bOQj@ripper/
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-4-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 28 Sep 2021 09:05:43 +0000 (12:05 +0300)]
ath11k: fix some sleeping in atomic bugs
[ Upstream commit
aadf7c81a0771b8f1c97dabca6a48bae1b387779 ]
The ath11k_dbring_bufs_replenish() and ath11k_dbring_fill_bufs()
take a "gfp" parameter but they since they take spinlocks, the
allocations they do have to be atomic. This causes a bug because
ath11k_dbring_buf_setup passes GFP_KERNEL for the gfp flags.
The fix is to use GFP_ATOMIC and remove the unused parameters.
Fixes:
bd6478559e27 ("ath11k: Add direct buffer ring support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210812070434.GE31863@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Almbladh [Tue, 14 Sep 2021 09:18:41 +0000 (11:18 +0200)]
bpf/tests: Fix error in tail call limit tests
[ Upstream commit
18935a72eb25525b655262579e1652362a3b29bb ]
This patch fixes an error in the tail call limit test that caused the
test to fail on for x86-64 JIT. Previously, the register R0 was used to
report the total number of tail calls made. However, after a tail call
fall-through, the value of the R0 register is undefined. Now, all tail
call error path tests instead use context state to store the count.
Fixes:
874be05f525e ("bpf, tests: Add tail call test suite")
Reported-by: Paul Chaignon <paul@cilium.io>
Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-14-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Sat, 25 Sep 2021 22:59:28 +0000 (00:59 +0200)]
net: dsa: rtl8366: Fix a bug in deleting VLANs
[ Upstream commit
d8251b9db34a2cbc5619b610e7e8aad1d165c531 ]
We were checking that the MC (member config) was != 0
for some reason, all we need to check is that the config
has no ports, i.e. no members. Then it can be recycled.
This must be some misunderstanding.
Fixes:
4ddcaf1ebb5e ("net: dsa: rtl8366: Properly clear member config")
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Sat, 25 Sep 2021 22:59:27 +0000 (00:59 +0200)]
net: dsa: rtl8366rb: Fix off-by-one bug
[ Upstream commit
5f5f12f5d4b108399130bb5c11f07765851d9cdb ]
The max VLAN number with non-4K VLAN activated is 15, and the
range is 0..15. Not 16.
The impact should be low since we by default have 4K VLAN and
thus have 4095 VLANs to play with in this switch. There will
not be a problem unless the code is rewritten to only use
16 VLANs.
Fixes:
d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Sat, 25 Sep 2021 11:22:50 +0000 (14:22 +0300)]
net/mlx5: Accept devlink user input after driver initialization complete
[ Upstream commit
64ea2d0e7263b67d8efc93fa1baace041ed36d1e ]
The change of devlink_alloc() to accept device makes sure that device
is fully initialized and device_register() does nothing except allowing
users to use that devlink instance.
Such change ensures that no user input will be usable till that point and
it eliminates the need to worry about internal locking as long as devlink_register
is called last since all accesses to the devlink are during initialization.
This change fixes the following lockdep warning.
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #27 Not tainted
------------------------------------------------------
devlink/265 is trying to acquire lock:
ffff8880133c2bc0 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_unload_one+0x1e/0xa0 [mlx5_core]
but task is already holding lock:
ffffffff8362b468 (devlink_mutex){+.+.}-{3:3}, at: devlink_nl_pre_doit+0x2b/0x8d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (devlink_mutex){+.+.}-{3:3}:
__mutex_lock+0x149/0x1310
devlink_register+0xe7/0x280
mlx5_devlink_register+0x118/0x480 [mlx5_core]
mlx5_init_one+0x34b/0x440 [mlx5_core]
probe_one+0x480/0x6e0 [mlx5_core]
pci_device_probe+0x2a0/0x4a0
really_probe+0x1cb/0xba0
__driver_probe_device+0x18f/0x470
driver_probe_device+0x49/0x120
__driver_attach+0x1ce/0x400
bus_for_each_dev+0x11e/0x1a0
bus_add_driver+0x309/0x570
driver_register+0x20f/0x390
0xffffffffa04a0062
do_one_initcall+0xd5/0x400
do_init_module+0x1c8/0x760
load_module+0x7d9d/0xa4b0
__do_sys_finit_module+0x118/0x1a0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&dev->intf_state_mutex){+.+.}-{3:3}:
__lock_acquire+0x2999/0x5a40
lock_acquire+0x1a9/0x4a0
__mutex_lock+0x149/0x1310
mlx5_unload_one+0x1e/0xa0 [mlx5_core]
mlx5_devlink_reload_down+0x185/0x2b0 [mlx5_core]
devlink_reload+0x1f2/0x640
devlink_nl_cmd_reload+0x6c3/0x10d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x27f/0x4a0
netlink_rcv_skb+0x11e/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
netlink_sendmsg+0x6fb/0xbe0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x192/0x240
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(devlink_mutex);
lock(&dev->intf_state_mutex);
lock(devlink_mutex);
lock(&dev->intf_state_mutex);
*** DEADLOCK ***
3 locks held by devlink/265:
#0:
ffffffff836371d0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40
#1:
ffffffff83637288 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x31a/0x4a0
#2:
ffffffff8362b468 (devlink_mutex){+.+.}-{3:3}, at: devlink_nl_pre_doit+0x2b/0x8d0
stack backtrace:
CPU: 0 PID: 265 Comm: devlink Not tainted 5.14.0-rc2+ #27
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
check_noncircular+0x268/0x310
? print_circular_bug+0x460/0x460
? __kernel_text_address+0xe/0x30
? alloc_chain_hlocks+0x1e6/0x5a0
__lock_acquire+0x2999/0x5a40
? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
? add_lock_to_list.constprop.0+0x6c/0x530
lock_acquire+0x1a9/0x4a0
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
? lock_release+0x6c0/0x6c0
? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
? lock_is_held_type+0x98/0x110
__mutex_lock+0x149/0x1310
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
? lock_is_held_type+0x98/0x110
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
? find_held_lock+0x2d/0x110
? mutex_lock_io_nested+0x1160/0x1160
? mlx5_lag_is_active+0x72/0x90 [mlx5_core]
? lock_downgrade+0x6d0/0x6d0
? do_raw_spin_lock+0x12e/0x270
? rwlock_bug.part.0+0x90/0x90
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
mlx5_unload_one+0x1e/0xa0 [mlx5_core]
mlx5_devlink_reload_down+0x185/0x2b0 [mlx5_core]
? netlink_broadcast_filtered+0x308/0xac0
? mlx5_devlink_info_get+0x1f0/0x1f0 [mlx5_core]
? __build_skb_around+0x110/0x2b0
? __alloc_skb+0x113/0x2b0
devlink_reload+0x1f2/0x640
? devlink_unregister+0x1e0/0x1e0
? security_capable+0x51/0x90
devlink_nl_cmd_reload+0x6c3/0x10d0
? devlink_nl_cmd_get_doit+0x1e0/0x1e0
? devlink_nl_pre_doit+0x72/0x8d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
? __lock_acquire+0x15e2/0x5a40
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? mutex_lock_io_nested+0x1160/0x1160
? security_capable+0x51/0x90
genl_rcv_msg+0x27f/0x4a0
? genl_get_cmd+0x3c0/0x3c0
? lock_acquire+0x1a9/0x4a0
? devlink_nl_cmd_get_doit+0x1e0/0x1e0
? lock_release+0x6c0/0x6c0
netlink_rcv_skb+0x11e/0x340
? genl_get_cmd+0x3c0/0x3c0
? netlink_ack+0x930/0x930
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
? netlink_attachskb+0x750/0x750
? __alloc_skb+0x113/0x2b0
netlink_sendmsg+0x6fb/0xbe0
? netlink_unicast+0x700/0x700
? netlink_unicast+0x700/0x700
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x192/0x240
? __x64_sys_getpeername+0xb0/0xb0
? do_sys_openat2+0x10a/0x370
? down_write_nested+0x150/0x150
? do_user_addr_fault+0x215/0xd50
? __x64_sys_openat+0x11f/0x1d0
? __x64_sys_open+0x1a0/0x1a0
__x64_sys_sendto+0xdc/0x1b0
? syscall_enter_from_user_mode+0x1d/0x50
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f50b50b6b3a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:
00007fff6c0d3f38 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
0000000000000005 RCX:
00007f50b50b6b3a
RDX:
0000000000000038 RSI:
000055763ac08440 RDI:
0000000000000003
RBP:
000055763ac08410 R08:
00007f50b5192200 R09:
000000000000000c
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000000000 R14:
000055763ac08410 R15:
000055763ac08440
mlx5_core 0000:00:09.0: firmware version: 4.8.9999
mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link)
mlx5_core 0000:00:09.0 eth1: Link up
Fixes:
a6f3b62386a0 ("net/mlx5: Move devlink registration before interfaces load")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Mon, 27 Sep 2021 11:11:06 +0000 (13:11 +0200)]
cfg80211: always free wiphy specific regdomain
[ Upstream commit
e53e9828a8d2c6545e01ff9711f1221f2fd199ce ]
In the (somewhat unlikely) event that we allocate a wiphy, then
add a regdomain to it, and then fail registration, we leak the
regdomain. Fix this by just always freeing it at the end, in the
normal cases we'll free (and NULL) it during wiphy_unregister().
This happened when the wiphy settings were bad, and since they
can be controlled by userspace with hwsim, syzbot was able to
find this issue.
Reported-by: syzbot+1638e7c770eef6b6c0d0@syzkaller.appspotmail.com
Fixes:
3e0c3ff36c4c ("cfg80211: allow multiple driver regulatory_hints()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210927131105.68b70cef4674.I4b9f0aa08c2af28555963b9fe3d34395bb72e0cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Mon, 27 Sep 2021 09:51:24 +0000 (11:51 +0200)]
mac80211: twt: don't use potentially unaligned pointer
[ Upstream commit
7ff379ba2d4b7b205240e666601fe302207d73f8 ]
Since we're pointing into a frame, the pointer to the
twt_agrt->req_type struct member is potentially not
aligned properly. Open-code le16p_replace_bits() to
avoid passing an unaligned pointer.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210927115124.e1208694f37b.Ie3de9bcc5dde5a79e3ac81f3185beafe4d214e57@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Mon, 2 Aug 2021 17:25:01 +0000 (10:25 -0700)]
fortify: Fix dropped strcpy() compile-time write overflow check
[ Upstream commit
072af0c638dc8a5c7db2edc4dddbd6d44bee3bdb ]
The implementation for intra-object overflow in str*-family functions
accidentally dropped compile-time write overflow checking in strcpy(),
leaving it entirely to run-time. Add back the intended check.
Fixes:
6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions")
Cc: Daniel Axtens <dja@axtens.net>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Fri, 24 Sep 2021 21:12:34 +0000 (14:12 -0700)]
mptcp: do not shrink snd_nxt when recovering
[ Upstream commit
0d199e4363b482badcedba764e2aceab53a4a10a ]
When recovering after a link failure, snd_nxt should not be set to a
lower value. Else, update of snd_nxt is broken because:
msk->snd_nxt += ret; (where ret is number of bytes sent)
assumes that snd_nxt always moves forward.
After reduction, its possible that snd_nxt update gets out of sync:
dfrag we just sent might have had a data sequence number even past
recovery_snd_nxt.
This change factors the common msk state update to a helper
and updates snd_nxt based on the current dfrag data sequence number.
The conditional is required for the recovery phase where we may
re-transmit old dfrags that are before current snd_nxt.
After this change, snd_nxt only moves forward and covers all in-sequence
data that was transmitted.
recovery_snd_nxt is retained to detect when recovery has completed.
Fixes:
1e1d9d6f119c5 ("mptcp: handle pending data on closed subflow")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Fri, 24 Sep 2021 03:18:37 +0000 (03:18 +0000)]
rxrpc: Fix _usecs_to_jiffies() by using usecs_to_jiffies()
[ Upstream commit
acde891c243c1ed85b19d4d5042bdf00914f5739 ]
Directly using _usecs_to_jiffies() might be unsafe, so it's
better to use usecs_to_jiffies() instead.
Because we can see that the result of _usecs_to_jiffies()
could be larger than MAX_JIFFY_OFFSET values without the
check of the input.
Fixes:
c410bf01933e ("Fix the excessive initial retransmission timeout")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Thu, 23 Sep 2021 18:12:53 +0000 (21:12 +0300)]
qed: Don't ignore devlink allocation failures
[ Upstream commit
e6a54d6f221301347aaf9d83bb1f23129325c1c5 ]
devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.
Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.
Fixes:
755f982bb1ff ("qed/qede: make devlink survive recovery")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Thu, 23 Sep 2021 18:12:48 +0000 (21:12 +0300)]
bnxt_en: Check devlink allocation and registration status
[ Upstream commit
e624c70e1131e145bd0510b8a700b5e2d112e377 ]
devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.
Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.
Fixes:
4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 20 Sep 2021 12:57:39 +0000 (14:57 +0200)]
Bluetooth: hci_h5: Fix (runtime)suspend issues on RTL8723BS HCIs
[ Upstream commit
9a9023f314873241a43b5a2b96e9c0caaa958433 ]
The recently added H5_WAKEUP_DISABLE h5->flags flag gets checked in
h5_btrtl_open(), but it gets set in h5_serdev_probe() *after*
calling hci_uart_register_device() and thus after h5_btrtl_open()
is called, set this flag earlier.
Also on devices where suspend/resume involves fully re-probing the HCI,
runtime-pm suspend should not be used, make the runtime-pm setup
conditional on the H5_WAKEUP_DISABLE flag too.
This fixes the HCI being removed and then re-added every 10 seconds
because it was being reprobed as soon as it was runtime-suspended.
Fixes:
66f077dde749 ("Bluetooth: hci_h5: add WAKEUP_DISABLE flag")
Fixes:
d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Thu, 16 Sep 2021 14:45:41 +0000 (15:45 +0100)]
crypto: qat - power up 4xxx device
[ Upstream commit
ca605f97dae4bf070b7c584aec23c1c922e4d823 ]
After reset or boot, QAT 4xxx devices are inactive and require to be
explicitly activated.
This is done by writing the DRV_ACTIVE bit in the PM_INTERRUPT register
and polling the PM_INIT_STATE to make sure that the transaction has
completed properly.
If this is not done, the driver will fail the initialization sequence
reporting the following message:
[ 22.081193] 4xxx 0000:f7:00.0: enabling device (0140 -> 0142)
[ 22.720285] QAT: AE0 is inactive!!
[ 22.720287] QAT: failed to get device out of reset
[ 22.720288] 4xxx 0000:f7:00.0: qat_hal_clr_reset error
[ 22.720290] 4xxx 0000:f7:00.0: Failed to init the AEs
[ 22.720290] 4xxx 0000:f7:00.0: Failed to initialise Acceleration Engine
[ 22.720789] 4xxx 0000:f7:00.0: Resetting device qat_dev0
[ 22.825099] 4xxx: probe of 0000:f7:00.0 failed with error -14
The patch also temporarily disables the power management source of
interrupt, to avoid possible spurious interrupts as the power management
feature is not fully supported.
The device init function has been added to adf_dev_init(), and not in the
probe of 4xxx to make sure that the device is re-enabled in case of
reset.
Note that the error code reported by hw_data->init_device() in
adf_dev_init() has been shadowed for consistency with the other calls
in the same function.
Fixes:
8c8268166e83 ("crypto: qat - add qat_4xxx driver")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Wed, 15 Sep 2021 22:03:07 +0000 (00:03 +0200)]
crypto: caam - disable pkc for non-E SoCs
[ Upstream commit
f20311cc9c58052e0b215013046cbf390937910c ]
On newer CAAM versions, not all accelerators are disabled if the SoC is
a non-E variant. While the driver checks most of the modules for
availability, there is one - PKHA - which sticks out. On non-E variants
it is still reported as available, that is the number of instances is
non-zero, but it has limited functionality. In particular it doesn't
support encryption and decryption, but just signing and verifying. This
is indicated by a bit in the PKHA_MISC field. Take this bit into account
if we are checking for availability.
This will the following error:
[ 8.167817] caam_jr 8020000.jr:
20000b0f: CCB: desc idx 11: : Invalid CHA selected.
Tested on an NXP LS1028A (non-E) SoC.
Fixes:
d239b10d4ceb ("crypto: caam - add register map changes cf. Era 10")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guchun Chen [Sat, 18 Sep 2021 05:43:41 +0000 (13:43 +0800)]
drm/amdgpu: move amdgpu_virt_release_full_gpu to fini_early stage
[ Upstream commit
6effad8abe0ba4db3d9c58ed585127858a990f35 ]
adev->rmmio is set to be NULL in amdgpu_device_unmap_mmio to prevent
access after pci_remove, however, in SRIOV case, amdgpu_virt_release_full_gpu
will still use adev->rmmio for access after amdgpu_device_unmap_mmio.
The patch is to move such SRIOV calling earlier to fini_early stage.
Fixes:
07775fc13878 ("drm/amdgpu: Unmap all MMIO mappings")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harry Wentland [Tue, 7 Sep 2021 23:40:06 +0000 (19:40 -0400)]
drm/amd/display: Pass display_pipe_params_st as const in DML
[ Upstream commit
22667e6ec6b2ce9ca706e9061660b059725d009c ]
[Why]
This neither needs to be on the stack nor passed by value
to each function call. In fact, when building with clang
it seems to break the Linux's default 1024 byte stack
frame limit.
[How]
We can simply pass this as a const pointer.
This patch fixes these Coverity IDs
Addresses-Coverity-ID: 1424031: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423970: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423941: ("Big parameter passed by value")
Addresses-Coverity-ID: 1451742: ("Big parameter passed by value")
Addresses-Coverity-ID: 1451887: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454146: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454152: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454413: ("Big parameter passed by value")
Addresses-Coverity-ID: 1466144: ("Big parameter passed by value")
Addresses-Coverity-ID: 1487237: ("Big parameter passed by value")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes:
3fe617ccafd6 ("Enable '-Werror' by default for all kernel builds")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: Christian König <christian.koenig@amd.com>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Grodzovsky [Wed, 15 Sep 2021 19:27:18 +0000 (15:27 -0400)]
drm/amdgpu: Fix crash on device remove/driver unload
[ Upstream commit
d82e2c249c8ffaec20fa618611ea2ab4dcfd4d01 ]
Crash:
BUG: unable to handle page fault for address:
00000000000010e1
RIP: 0010:vega10_power_gate_vce+0x26/0x50 [amdgpu]
Call Trace:
pp_set_powergating_by_smu+0x16a/0x2b0 [amdgpu]
amdgpu_dpm_set_powergating_by_smu+0x92/0xf0 [amdgpu]
amdgpu_dpm_enable_vce+0x2e/0xc0 [amdgpu]
vce_v4_0_hw_fini+0x95/0xa0 [amdgpu]
amdgpu_device_fini_hw+0x232/0x30d [amdgpu]
amdgpu_driver_unload_kms+0x5c/0x80 [amdgpu]
amdgpu_pci_remove+0x27/0x40 [amdgpu]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1d0
device_release_driver+0x12/0x20
pci_stop_bus_device+0x79/0xa0
pci_stop_and_remove_bus_device_locked+0x1b/0x30
remove_store+0x7b/0x90
dev_attr_store+0x17/0x30
sysfs_kf_write+0x4b/0x60
kernfs_fop_write_iter+0x151/0x1e0
Why:
VCE/UVD had dependency on SMC block for their suspend but
SMC block is the first to do HW fini due to some constraints
How:
Since the original patch was dealing with suspend issues
move the SMC block dependency back into suspend hooks as
was done in V1 of the original patches.
Keep flushing idle work both in suspend and HW fini seuqnces
since it's essential in both cases.
Fixes:
859e4659273f1d ("drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend")
Fixes:
bf756fb833cbe8 ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend")
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Wed, 22 Sep 2021 13:49:45 +0000 (21:49 +0800)]
Bluetooth: btmtkuart: fix a memleak in mtk_hci_wmt_sync
[ Upstream commit
3e5f2d90c28f9454e421108554707620bc23269d ]
bdev->evt_skb will get freed in the normal path and one error path
of mtk_hci_wmt_sync, while the other error paths do not free it,
which may cause a memleak. This bug is suggested by a static analysis
tool, please advise.
Fixes:
e0b67035a90b ("Bluetooth: mediatek: update the common setup between MT7622 and other devices")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ajay Singh [Thu, 16 Sep 2021 16:49:18 +0000 (16:49 +0000)]
wilc1000: fix possible memory leak in cfg_scan_result()
[ Upstream commit
3c719fed0f3a5e95b1d164609ecc81c4191ade70 ]
When the BSS reference holds a valid reference, it is not freed. The 'if'
condition is wrong. Instead of the 'if (bss)' check, the 'if (!bss)' check
is used.
The issue is solved by removing the unnecessary 'if' check because
cfg80211_put_bss() already performs the NULL validation.
Fixes:
6cd4fa5ab691 ("staging: wilc1000: make use of cfg80211_inform_bss_frame()")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210916164902.74629-3-ajay.kathat@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bryan O'Donoghue [Thu, 9 Sep 2021 14:44:27 +0000 (15:44 +0100)]
wcn36xx: Fix Antenna Diversity Switching
[ Upstream commit
701668d3bfa03dabc5095fc383d5315544ee5b31 ]
We have been tracking a strange bug with Antenna Diversity Switching (ADS)
on wcn3680b for a while.
ADS is configured like this:
A. Via a firmware configuration table baked into the NV area.
1. Defines if ADS is enabled.
2. Defines which GPIOs are connected to which antenna enable pin.
3. Defines which antenna/GPIO is primary and which is secondary.
B. WCN36XX_CFG_VAL(ANTENNA_DIVERSITY, N)
N is a bitmask of available antenna.
Setting N to 3 indicates a bitmask of enabled antenna (1 | 2).
Obviously then we can set N to 1 or N to 2 to fix to a particular
antenna and disable antenna diversity.
C. WCN36XX_CFG_VAL(ASD_PROBE_INTERVAL, XX)
XX is the number of beacons between each antenna RSSI check.
Setting this value to 50 means, every 50 received beacons, run the
ADS algorithm.
D. WCN36XX_CFG_VAL(ASD_TRIGGER_THRESHOLD, YY)
YY is a two's complement integer which specifies the RSSI decibel
threshold below which ADS will run.
We default to -60db here, meaning a measured RSSI <= -60db will
trigger an ADS probe.
E. WCN36XX_CFG_VAL(ASD_RTT_RSSI_HYST_THRESHOLD, Z)
Z is a hysteresis value, indicating a delta which the RSSI must
exceed for the antenna switch to be valid.
For example if HYST_THRESHOLD == 3 AntennaId1-RSSI == -60db and
AntennaId-2-RSSI == -58db then firmware will not switch antenna.
The threshold needs to be -57db or better to satisfy the criteria.
F. A firmware feature bit also exists ANTENNA_DIVERSITY_SELECTION.
This feature bit is used by the firmware to report if
ANTENNA_DIVERSITY_SELECTION is supported. The host is not required to
toggle this bit to enable or disable ADS.
ADS works like this:
A. Every XX beacons the firmware switches to or remains on the primary
antenna.
B. The firmware then sends a Request-To-Send (RTS) packet to the AP.
C. The firmware waits for a Clear-To-Send (CTS) response from the AP.
D. The firmware then notes the received RSSI on the CTS packet.
E. The firmware then repeats steps A-D on the secondary antenna.
F. Subsequently if the RSSI on the measured antenna is better than
ASD_TRIGGER_THRESHOLD + the active antenna's RSSI then the
measured antenna becomes the active antenna.
G. If RSSI rises past ASD_TRIGGER_THRESHOLD then ADS doesn't run at
all even if there is a substantially better RSSI on the alternative
antenna.
What we have been observing is that the RTS packet is being sent but the
MAC address is a byte-swapped version of the target MAC. The ADS/RTS MAC is
corrupted only when the link is encrypted, if the AP is open the RTS MAC is
correct. Similarly if we configure the firmware to an RTS/CTS sequence for
regular data - the transmitted RTS MAC is correctly formatted.
Internally the wcn36xx firmware uses the indexes in the SMD commands to
populate and extract data from specific entries in an STA lookup table. The
AP's MAC appears a number of times in different indexes within this lookup
table, so the MAC address extracted for the data-transmit RTS and the MAC
address extracted for the ADS/RTS packet are not the same STA table index.
Our analysis indicates the relevant firmware STA table index is
"bssSelfStaIdx".
There is an STA populate function responsible for formatting the MAC
address of the bssSelfStaIdx including byte-swapping the MAC address.
Its clear then that the required STA populate command did not run for
bssSelfStaIdx.
So taking a look at the sequence of SMD commands sent to the firmware we
see the following downstream when moving from an unencrypted to encrypted
BSS setup.
- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_CONFIG_STA_REQ
- WLAN_HAL_SET_STAKEY_REQ
Upstream in wcn36xx we have
- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_SET_STAKEY_REQ
The solution then is to add the missing WLAN_HAL_CONFIG_STA_REQ between
WLAN_HAL_CONFIG_BSS_REQ and WLAN_HAL_SET_STAKEY_REQ.
No surprise WLAN_HAL_CONFIG_STA_REQ is the routine responsible for
populating the STA lookup table in the firmware and once done the MAC sent
by the ADS routine is in the correct byte-order.
This bug is apparent with ADS but it is also the case that any other
firmware routine that depends on the "bssSelfStaIdx" would retrieve
malformed data on an encrypted link.
Fixes:
3e977c5c523d ("wcn36xx: Define wcn3680 specific firmware parameters")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210909144428.2564650-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Waiman Long [Sat, 18 Sep 2021 22:53:08 +0000 (18:53 -0400)]
cgroup: Make rebind_subsystems() disable v2 controllers all at once
[ Upstream commit
7ee285395b211cad474b2b989db52666e0430daf ]
It was found that the following warning was displayed when remounting
controllers from cgroup v2 to v1:
[ 8042.997778] WARNING: CPU: 88 PID: 80682 at kernel/cgroup/cgroup.c:3130 cgroup_apply_control_disable+0x158/0x190
:
[ 8043.091109] RIP: 0010:cgroup_apply_control_disable+0x158/0x190
[ 8043.096946] Code: ff f6 45 54 01 74 39 48 8d 7d 10 48 c7 c6 e0 46 5a a4 e8 7b 67 33 00 e9 41 ff ff ff 49 8b 84 24 e8 01 00 00 0f b7 40 08 eb 95 <0f> 0b e9 5f ff ff ff 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3
[ 8043.115692] RSP: 0018:
ffffba8a47c23d28 EFLAGS:
00010202
[ 8043.120916] RAX:
0000000000000036 RBX:
ffffffffa624ce40 RCX:
000000000000181a
[ 8043.128047] RDX:
ffffffffa63c43e0 RSI:
ffffffffa63c43e0 RDI:
ffff9d7284ee1000
[ 8043.135180] RBP:
ffff9d72874c5800 R08:
ffffffffa624b090 R09:
0000000000000004
[ 8043.142314] R10:
ffffffffa624b080 R11:
0000000000002000 R12:
ffff9d7284ee1000
[ 8043.149447] R13:
ffff9d7284ee1000 R14:
ffffffffa624ce70 R15:
ffffffffa6269e20
[ 8043.156576] FS:
00007f7747cff740(0000) GS:
ffff9d7a5fc00000(0000) knlGS:
0000000000000000
[ 8043.164663] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8043.170409] CR2:
00007f7747e96680 CR3:
0000000887d60001 CR4:
00000000007706e0
[ 8043.177539] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 8043.184673] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 8043.191804] PKRU:
55555554
[ 8043.194517] Call Trace:
[ 8043.196970] rebind_subsystems+0x18c/0x470
[ 8043.201070] cgroup_setup_root+0x16c/0x2f0
[ 8043.205177] cgroup1_root_to_use+0x204/0x2a0
[ 8043.209456] cgroup1_get_tree+0x3e/0x120
[ 8043.213384] vfs_get_tree+0x22/0xb0
[ 8043.216883] do_new_mount+0x176/0x2d0
[ 8043.220550] __x64_sys_mount+0x103/0x140
[ 8043.224474] do_syscall_64+0x38/0x90
[ 8043.228063] entry_SYSCALL_64_after_hwframe+0x44/0xae
It was caused by the fact that rebind_subsystem() disables
controllers to be rebound one by one. If more than one disabled
controllers are originally from the default hierarchy, it means that
cgroup_apply_control_disable() will be called multiple times for the
same default hierarchy. A controller may be killed by css_kill() in
the first round. In the second round, the killed controller may not be
completely dead yet leading to the warning.
To avoid this problem, we collect all the ssid's of controllers that
needed to be disabled from the default hierarchy and then disable them
in one go instead of one by one.
Fixes:
334c3679ec4b ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yoshitaka Ikeda [Wed, 8 Sep 2021 05:29:12 +0000 (05:29 +0000)]
spi: Fixed division by zero warning
[ Upstream commit
09134c5322df9f105d9ed324051872d5d0e162aa ]
The reason for dividing by zero is because the dummy bus width is zero,
but if the dummy n bytes is zero, it indicates that there is no data transfer,
so there is no need for calculation.
Fixes:
7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1")
Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/OSZPR01MB70049C8F56ED8902852DF97B8BD49@OSZPR01MB7004.jpnprd01.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Bee [Sat, 18 Sep 2021 14:04:20 +0000 (16:04 +0200)]
drm: bridge: it66121: Fix return value it66121_probe
[ Upstream commit
f3bc07eba481942a246926c5b934199e7ccd567b ]
Currently it66121_probe returns -EPROBE_DEFER if the there is no remote
endpoint found in the device tree which doesn't seem helpful, since this
is not going to change later and it is never checked if the next bridge
has been initialized yet. It will fail in that case later while doing
drm_bridge_attach for the next bridge in it66121_bridge_attach.
Since the bindings documentation for it66121 bridge driver states
there has to be a remote endpoint defined, its safe to return -EINVAL
in that case.
This additonally adds a check, if the remote endpoint is enabled and
returns -EPROBE_DEFER, if the remote bridge hasn't been initialized
(yet).
Fixes:
988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918140420.231346-1-knaerzche@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Fri, 17 Sep 2021 13:36:31 +0000 (14:36 +0100)]
net: phylink: don't call netif_carrier_off() with NULL netdev
[ Upstream commit
cbcca2e3961eac736566ac13ef0d0bf6f0b764ec ]
Dan Carpenter points out that we have a code path that permits a NULL
netdev pointer to be passed to netif_carrier_off(), which will cause
a kernel oops. In any case, we need to set pl->old_link_state to false
to have the desired effect when there is no netdev present.
Fixes:
f97493657c63 ("net: phylink: add suspend/resume support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yajun Deng [Sat, 18 Sep 2021 09:04:10 +0000 (17:04 +0800)]
net: net_namespace: Fix undefined member in key_remove_domain()
[ Upstream commit
aed0826b0cf2e488900ab92193893e803d65c070 ]
The key_domain member in struct net only exists if we define CONFIG_KEYS.
So we should add the define when we used key_domain.
Fixes:
9b242610514f ("keys: Network namespace domain tag")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Fri, 3 Sep 2021 08:40:01 +0000 (10:40 +0200)]
lockdep: Let lock_is_held_type() detect recursive read as read
[ Upstream commit
2507003a1d10917c9158077bf6030719d02c941e ]
lock_is_held_type(, 1) detects acquired read locks. It only recognized
locks acquired with lock_acquire_shared(). Read locks acquired with
lock_acquire_shared_recursive() are not recognized because a `2' is
stored as the read value.
Rework the check to additionally recognise lock's read value one and two
as a read held lock.
Fixes:
e918188611f07 ("locking: More accurate annotations for read_lock()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20210903084001.lblecrvz4esl4mrr@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
liuyuntao [Sat, 28 Aug 2021 10:43:21 +0000 (18:43 +0800)]
virtio-gpu: fix possible memory allocation failure
[ Upstream commit
5bd4f20de8acad37dbb3154feb34dbc36d506c02 ]
When kmem_cache_zalloc in virtio_gpu_get_vbuf fails, it will return
an error code. But none of its callers checks this error code, and
a core dump will take place.
Considering many of its callers can't handle such error, I add
a __GFP_NOFAIL flag when calling kmem_cache_zalloc to make sure
it won't fail, and delete those unused error handlings.
Fixes:
dc5698e80cf724 ("Add virtio gpu driver.")
Signed-off-by: Yuntao Liu <liuyuntao10@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210828104321.3410312-1-liuyuntao10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 25 Aug 2021 20:38:59 +0000 (13:38 -0700)]
crypto: sm4 - Do not change section of ck and sbox
[ Upstream commit
4a7e1e5fc294687a8941fa3eeb4a7e8539ca5e2f ]
When building with clang and GNU as, there is a warning about ignored
changed section attributes:
/tmp/sm4-c916c8.s: Assembler messages:
/tmp/sm4-c916c8.s:677: Warning: ignoring changed section attributes for
.data..cacheline_aligned
"static const" places the data in .rodata but __cacheline_aligned has
the section attribute to place it in .data..cacheline_aligned, in
addition to the aligned attribute.
To keep the alignment but avoid attempting to change sections, use the
____cacheline_aligned attribute, which is just the aligned attribute.
Fixes:
2b31277af577 ("crypto: sm4 - create SM4 library based on sm4 generic code")
Link: https://github.com/ClangBuiltLinux/linux/issues/1441
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Iago Toral Quiroga [Wed, 15 Sep 2021 10:05:07 +0000 (12:05 +0200)]
drm/v3d: fix wait for TMU write combiner flush
[ Upstream commit
e4f868191138975f2fdf2f37c11318b47db4acc9 ]
The hardware sets the TMUWCF bit back to 0 when the TMU write
combiner flush completes so we should be checking for that instead
of the L2TFLS bit.
v2 (Melissa Wen):
- Add Signed-off-by and Fixes tags.
- Change the error message for the timeout to be more clear.
Fixes spurious Vulkan CTS failures in:
dEQP-VK.binding_model.descriptorset_random.*
Fixes:
d223f98f02099 ("drm/v3d: Add support for compute shader dispatch.")
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915100507.3945-1-itoral@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Tue, 14 Sep 2021 12:58:28 +0000 (15:58 +0300)]
net/mlx5: Publish and unpublish all devlink parameters at once
[ Upstream commit
e9310aed8e6a5003abb2aa6b9229d2fb9ceb9e85 ]
The devlink parameters were published in two steps despite being static
and known in advance.
First step was to use devlink_params_publish() which iterated over all
known up to that point parameters and sent notification messages.
In second step, the call was devlink_param_publish() that looped over
same parameters list and sent notification for new parameters.
In order to simplify the API, move devlink_params_publish() to be called
when all parameters were already added and save the need to iterate over
parameters list again.
As a side effect, this change fixes the error unwind flow in which
parameters were not marked as unpublished.
Fixes:
82e6c96f04e1 ("net/mlx5: Register to devlink ingress VLAN filter trap")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 24 Jun 2021 09:41:02 +0000 (11:41 +0200)]
objtool: Handle __sanitize_cov*() tail calls
[ Upstream commit
f56dae88a81fded66adf2bea9922d1d98d1da14f ]
Turns out the compilers also generate tail calls to __sanitize_cov*(),
make sure to also patch those out in noinstr code.
Fixes:
0f1441b44e82 ("objtool: Fix noinstr vs KCOV")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20210624095147.818783799@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 24 Jun 2021 09:41:00 +0000 (11:41 +0200)]
x86/xen: Mark cpu_bringup_and_idle() as dead_end_function
[ Upstream commit
9af9dcf11bda3e2c0e24c1acaacb8685ad974e93 ]
The asm_cpu_bringup_and_idle() function is required to push the return
value on the stack in order to make ORC happy, but the only reason
objtool doesn't complain is because of a happy accident.
The thing is that asm_cpu_bringup_and_idle() doesn't return, so
validate_branch() never terminates and falls through to the next
function, which in the normal case is the hypercall_page. And that, as
it happens, is 4095 NOPs and a RET.
Make asm_cpu_bringup_and_idle() terminate on it's own, by making the
function it calls as a dead-end. This way we no longer rely on what
code happens to come after.
Fixes:
c3881eb58d56 ("x86/xen: Make the secondary CPU idle tasks reliable")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20210624095147.693801717@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aleksander Jan Bajkowski [Tue, 14 Sep 2021 21:21:00 +0000 (23:21 +0200)]
MIPS: lantiq: dma: fix burst length for DEU
[ Upstream commit
5ad74d39c51dd41b3c819f4f5396655f0629b4fd ]
The current definition of 2W burst length is invalid.
This patch fixes it. Current downstream DEU driver doesn't
use DMA. An incorrect burst length value doesn't cause any
errors. This patch also adds other burst length values.
Fixes:
dfec1a827d2b ("MIPS: Lantiq: Add DMA support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neeraj Upadhyay [Wed, 18 Aug 2021 08:04:00 +0000 (13:34 +0530)]
rcu: Fix existing exp request check in sync_sched_exp_online_cleanup()
[ Upstream commit
f0b2b2df5423fb369ac762c77900bc7765496d58 ]
The sync_sched_exp_online_cleanup() checks to see if RCU needs
an expedited quiescent state from the incoming CPU, sending it
an IPI if so. Before sending IPI, it checks whether expedited
qs need has been already requested for the incoming CPU, by
checking rcu_data.cpu_no_qs.b.exp for the current cpu, on which
sync_sched_exp_online_cleanup() is running. This works for the
case where incoming CPU is same as self. However, for the case
where incoming CPU is different from self, expedited request
won't get marked, which can potentially delay reporting of
expedited quiescent state for the incoming CPU.
Fixes:
e015a3411220 ("rcu: Avoid self-IPI in sync_sched_exp_online_cleanup()")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Thu, 2 Sep 2021 20:27:56 +0000 (23:27 +0300)]
Bluetooth: hci_uart: fix GPF in h5_recv
[ Upstream commit
2fc7acb69fa3573d4bf7a90c323296d840daf330 ]
Syzbot hit general protection fault in h5_recv(). The problem was in
missing NULL check.
hu->serdev can be NULL and we cannot blindly pass &serdev->dev
somewhere, since it can cause GPF.
Fixes:
d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend")
Reported-and-tested-by: syzbot+7d41312fe3f123a6f605@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Toke Høiland-Jørgensen [Wed, 1 Sep 2021 11:48:12 +0000 (13:48 +0200)]
libbpf: Don't crash on object files with no symbol tables
[ Upstream commit
03e601f48b2da6fb44d0f7b86957a8f6bacfb347 ]
If libbpf encounters an ELF file that has been stripped of its symbol
table, it will crash in bpf_object__add_programs() when trying to
dereference the obj->efile.symbols pointer.
Fix this by erroring out of bpf_object__elf_collect() if it is not able
able to find the symbol table.
v2:
- Move check into bpf_object__elf_collect() and add nice error message
Fixes:
6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901114812.204720-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Desmond Cheong Zhi Xi [Fri, 3 Sep 2021 03:13:06 +0000 (23:13 -0400)]
Bluetooth: fix init and cleanup of sco_conn.timeout_work
[ Upstream commit
49d8a5606428ca0962d09050a5af81461ff90fbb ]
Before freeing struct sco_conn, all delayed timeout work should be
cancelled. Otherwise, sco_sock_timeout could potentially use the
sco_conn after it has been freed.
Additionally, sco_conn.timeout_work should be initialized when the
connection is allocated, not when the channel is added. This is
because an sco_conn can create channels with multiple sockets over its
lifetime, which happens if sockets are released but the connection
isn't deleted.
Fixes:
ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Fri, 27 Aug 2021 16:39:56 +0000 (17:39 +0100)]
drm/bridge: it66121: Wait for next bridge to be probed
[ Upstream commit
8b03e3fc79189b17d31a82f5e175698802a11e87 ]
If run before the next bridge is initialized, of_drm_find_bridge() will
give us a NULL pointer.
If that's the case, return -EPROBE_DEFER; we may have more luck next
time.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes:
988156dc2fc9 ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-2-paul@crapouillou.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Fri, 27 Aug 2021 16:39:55 +0000 (17:39 +0100)]
drm/bridge: it66121: Initialize {device,vendor}_ids
[ Upstream commit
3a5f3d61de657bc1c2b53b77d065c5526f982e10 ]
These two arrays are populated with data read from the I2C device
through regmap_read(), and the data is then compared with hardcoded
vendor/product ID values of supported chips.
However, the return value of regmap_read() was never checked. This is
fine, as long as the two arrays are zero-initialized, so that we don't
compare the vendor/product IDs against whatever garbage is left on the
stack.
Address this issue by zero-initializing these two arrays.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes:
988156dc2fc9 ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-1-paul@crapouillou.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Thu, 26 Aug 2021 15:32:43 +0000 (08:32 -0700)]
perf/x86/intel/uncore: Fix Intel SPR M3UPI event constraints
[ Upstream commit
4034fb207e302cc0b1f304084d379640c1fb1436 ]
SPR M3UPI have the exact same event constraints as ICX, so add the
constraints.
Fixes:
2a8e51eae7c8 ("perf/x86/intel/uncore: Add Sapphire Rapids server M3UPI support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Thu, 26 Aug 2021 15:32:42 +0000 (08:32 -0700)]
perf/x86/intel/uncore: Fix Intel SPR M2PCIE event constraints
[ Upstream commit
f01d7d558e1855d4aa8e927b86111846536dd476 ]
Similar to the ICX M2PCIE events, some of the SPR M2PCIE events also
have constraints. Add the constraints for SPR M2PCIE.
Fixes:
f85ef898f884 ("perf/x86/intel/uncore: Add Sapphire Rapids server M2PCIe support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Thu, 26 Aug 2021 15:32:41 +0000 (08:32 -0700)]
perf/x86/intel/uncore: Fix Intel SPR IIO event constraints
[ Upstream commit
67c5d44384f8dc57e1c1b3040423cfce99b578cd ]
SPR IIO events have the exact same event constraints as ICX, so add the
constraints.
Fixes:
3ba7095beaec ("perf/x86/intel/uncore: Add Sapphire Rapids server IIO support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Thu, 26 Aug 2021 15:32:40 +0000 (08:32 -0700)]
perf/x86/intel/uncore: Fix Intel SPR CHA event constraints
[ Upstream commit
9d756e408e080d40e7916484b00c802026e6d1ad ]
SPR CHA events have the exact same event constraints as SKX, so add the
constraints.
Fixes:
949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Foss [Wed, 18 Aug 2021 17:13:17 +0000 (19:13 +0200)]
drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()
[ Upstream commit
7f16d0f3b8e2d13f940e944cd17044ca8eeb8b32 ]
The return value of sp_tx_rst_aux() is not propagated, which means
both compiler warnings and potential errors not being handled.
Fixes:
8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-1-robert.foss@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Imre Deak [Mon, 9 Aug 2021 13:31:46 +0000 (16:31 +0300)]
fbdev/efifb: Release PCI device's runtime PM ref during FB destroy
[ Upstream commit
55285e21f04517939480966164a33898c34b2af2 ]
Atm the EFI FB platform driver gets a runtime PM reference for the
associated GFX PCI device during probing the EFI FB platform device and
releases it only when the platform device gets unbound.
When fbcon switches to the FB provided by the PCI device's driver (for
instance i915/drmfb), the EFI FB will get only unregistered without the
EFI FB platform device getting unbound, keeping the runtime PM reference
acquired during the platform device probing. This reference will prevent
the PCI driver from runtime suspending the device.
Fix this by releasing the RPM reference from the EFI FB's destroy hook,
called when the FB gets unregistered.
While at it assert that pm_runtime_get_sync() didn't fail.
v2:
- Move pm_runtime_get_sync() before register_framebuffer() to avoid its
race wrt. efifb_destroy()->pm_runtime_put(). (Daniel)
- Assert that pm_runtime_get_sync() didn't fail.
- Clarify commit message wrt. platform/PCI device/driver and driver
removal vs. device unbinding.
Fixes:
a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809133146.2478382-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Fri, 29 Oct 2021 18:29:07 +0000 (11:29 -0700)]
selftests/bpf: Fix strobemeta selftest regression
[ Upstream commit
0133c20480b14820d43c37c0e9502da4bffcad3a ]
After most recent nightly Clang update strobemeta selftests started
failing with the following error (relevant portion of assembly included):
1624: (85) call bpf_probe_read_user_str#114
1625: (bf) r1 = r0
1626: (18) r2 = 0xfffffffe
1628: (5f) r1 &= r2
1629: (55) if r1 != 0x0 goto pc+7
1630: (07) r9 += 104
1631: (6b) *(u16 *)(r9 +0) = r0
1632: (67) r0 <<= 32
1633: (77) r0 >>= 32
1634: (79) r1 = *(u64 *)(r10 -456)
1635: (0f) r1 += r0
1636: (7b) *(u64 *)(r10 -456) = r1
1637: (79) r1 = *(u64 *)(r10 -368)
1638: (c5) if r1 s< 0x1 goto pc+778
1639: (bf) r6 = r8
1640: (0f) r6 += r7
1641: (b4) w1 = 0
1642: (6b) *(u16 *)(r6 +108) = r1
1643: (79) r3 = *(u64 *)(r10 -352)
1644: (79) r9 = *(u64 *)(r10 -456)
1645: (bf) r1 = r9
1646: (b4) w2 = 1
1647: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any such access
In the above code r0 and r1 are implicitly related. Clang knows that,
but verifier isn't able to infer this relationship.
Yonghong Song narrowed down this "regression" in code generation to
a recent Clang optimization change ([0]), which for BPF target generates
code pattern that BPF verifier can't handle and loses track of register
boundaries.
This patch works around the issue by adding an BPF assembly-based helper
that helps to prove to the verifier that upper bound of the register is
a given constant by controlling the exact share of generated BPF
instruction sequence. This fixes the immediate issue for strobemeta
selftest.
[0] https://github.com/llvm/llvm-project/commit/
acabad9ff6bf13e00305d9d8621ee8eafc1f8b08
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211029182907.166910-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Mon, 25 Oct 2021 09:26:49 +0000 (11:26 +0200)]
netfilter: conntrack: set on IPS_ASSURED if flows enters internal stream state
[ Upstream commit
b7b1d02fc43925a4d569ec221715db2dfa1ce4f5 ]
The internal stream state sets the timeout to 120 seconds 2 seconds
after the creation of the flow, attach this internal stream state to the
IPS_ASSURED flag for consistent event reporting.
Before this patch:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Note IPS_ASSURED for the flow not yet in the internal stream state.
after this update:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 120 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Before this patch, short-lived UDP flows never entered IPS_ASSURED, so
they were already candidate flow to be deleted by early_drop under
stress.
Before this patch, IPS_ASSURED is set on regardless the internal stream
state, attach this internal stream state to IPS_ASSURED.
packet #1 (original direction) enters NEW state
packet #2 (reply direction) enters ESTABLISHED state, sets on IPS_SEEN_REPLY
paclet #3 (any direction) sets on IPS_ASSURED (if 2 seconds since the
creation has passed by).
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Fri, 15 Oct 2021 19:49:23 +0000 (21:49 +0200)]
parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
[ Upstream commit
66e29fcda1824f0427966fbee2bd2c85bf362c82 ]
With idle polling, IPIs are not sent when a CPU idle, but queued
and run later from do_idle(). The default kgdb_call_nmi_hook()
implementation gets the pointer to struct pt_regs from get_irq_reqs(),
which doesn't work in that case because it was not called from the
IPI interrupt handler. Fix it by defining our own kgdb_roundup()
function which sents an IPI_ENTER_KGDB. When that IPI is received
on the target CPU kgdb_nmicallback() is called.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Sat, 9 Oct 2021 21:15:17 +0000 (23:15 +0200)]
parisc/unwind: fix unwinder when CONFIG_64BIT is enabled
[ Upstream commit
8e0ba125c2bf1030af3267058019ba86da96863f ]
With 64 bit kernels unwind_special() is not working because
it compares the pc to the address of the function descriptor.
Add a helper function that compares pc with the dereferenced
address. This fixes all of the backtraces on my c8000. Without
this changes, a lot of backtraces are missing in kdb or the
show-all-tasks command from /proc/sysrq-trigger.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gao Xiang [Mon, 25 Oct 2021 07:43:11 +0000 (15:43 +0800)]
erofs: don't trigger WARN() when decompression fails
[ Upstream commit
a0961f351d82d43ab0b845304caa235dfe249ae9 ]
syzbot reported a WARNING [1] due to corrupted compressed data.
As Dmitry said, "If this is not a kernel bug, then the code should
not use WARN. WARN if for kernel bugs and is recognized as such by
all testing systems and humans."
[1] https://lore.kernel.org/r/
000000000000b3586105cf0ff45e@google.com
Link: https://lore.kernel.org/r/20211025074311.130395-1-hsiangkao@linux.alibaba.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reported-by: syzbot+d8aaffc3719597e8cfb4@syzkaller.appspotmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helge Deller [Mon, 4 Oct 2021 22:05:43 +0000 (00:05 +0200)]
task_stack: Fix end_of_stack() for architectures with upwards-growing stack
[ Upstream commit
9cc2fa4f4a92ccc6760d764e7341be46ee8aaaa1 ]
The function end_of_stack() returns a pointer to the last entry of a
stack. For architectures like parisc where the stack grows upwards
return the pointer to the highest address in the stack.
Without this change I faced a crash on parisc, because the stackleak
functionality wrote STACKLEAK_POISON to the lowest address and thus
overwrote the first 4 bytes of the task_struct which included the
TIF_FLAGS.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Sat, 9 Oct 2021 18:24:39 +0000 (20:24 +0200)]
parisc: fix warning in flush_tlb_all
[ Upstream commit
1030d681319b43869e0d5b568b9d0226652d1a6f ]
I've got the following splat after enabling preemption:
[ 3.724721] BUG: using __this_cpu_add() in preemptible [
00000000] code: swapper/0/1
[ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50
[ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324
[ 3.744605] Hardware name: 9000/785/C8000
[ 3.744605] Backtrace:
[ 3.744605] [<
00000000401d9d58>] show_stack+0x74/0xb0
[ 3.744605] [<
0000000040c27bd4>] dump_stack_lvl+0x10c/0x188
[ 3.744605] [<
0000000040c27c84>] dump_stack+0x34/0x48
[ 3.744605] [<
0000000040c33438>] check_preemption_disabled+0x178/0x1b0
[ 3.744605] [<
0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50
[ 3.744605] [<
00000000401d632c>] flush_tlb_all+0x58/0x2e0
[ 3.744605] [<
00000000401075c0>] 0x401075c0
[ 3.744605] [<
000000004010b8fc>] 0x4010b8fc
[ 3.744605] [<
00000000401080fc>] 0x401080fc
[ 3.744605] [<
00000000401d5224>] do_one_initcall+0x128/0x378
[ 3.744605] [<
0000000040102de8>] 0x40102de8
[ 3.744605] [<
0000000040c33864>] kernel_init+0x60/0x3a8
[ 3.744605] [<
00000000401d1020>] ret_from_kernel_thread+0x20/0x28
[ 3.744605]
Fix this by moving the __inc_irq_stat() into the locked section.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephane Eranian [Thu, 14 Oct 2021 00:12:14 +0000 (17:12 -0700)]
perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings
[ Upstream commit
2de71ee153efa93099d2ab864acffeec70a8dcd5 ]
This patch fixes the encoding for INST_RETIRED.PREC_DIST as published by Intel
(download.01.org/perfmon/) for Icelake. The official encoding
is event code 0x00 umask 0x1, a change from Skylake where it was code 0xc0
umask 0x1.
With this patch applied it is possible to run:
$ perf record -a -e cpu/event=0x00,umask=0x1/pp .....
Whereas before this would fail.
To avoid problems with tools which may use the old code, we maintain the old
encoding for Icelake.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211014001214.2680534-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuah Khan [Wed, 27 Oct 2021 19:26:19 +0000 (13:26 -0600)]
selftests/core: fix conflicting types compile error for close_range()
[ Upstream commit
f35dcaa0a8a29188ed61083d153df1454cf89d08 ]
close_range() test type conflicts with close_range() library call in
x86_64-linux-gnu/bits/unistd_ext.h. Fix it by changing the name to
core_close_range().
gcc -g -I../../../../usr/include/ close_range_test.c -o ../tools/testing/selftests/core/close_range_test
In file included from close_range_test.c:16:
close_range_test.c:57:6: error: conflicting types for ‘close_range’; have ‘void(struct __test_metadata *)’
57 | TEST(close_range)
| ^~~~~~~~~~~
../kselftest_harness.h:181:21: note: in definition of macro ‘__TEST_IMPL’
181 | static void test_name(struct __test_metadata *_metadata); \
| ^~~~~~~~~
close_range_test.c:57:1: note: in expansion of macro ‘TEST’
57 | TEST(close_range)
| ^~~~
In file included from /usr/include/unistd.h:1204,
from close_range_test.c:13:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:56:12: note: previous declaration of ‘close_range’ with type ‘int(unsigned int, unsigned int, int)’
56 | extern int close_range (unsigned int __fd, unsigned int __max_fd,
| ^~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anson Jacob [Fri, 17 Sep 2021 22:29:36 +0000 (18:29 -0400)]
drm/amd/display: dcn20_resource_construct reduce scope of FPU enabled
[ Upstream commit
bc39a69a2ac484e6575a958567c162ef56c9f278 ]
Limit when FPU is enabled to only functions that does FPU operations for
dcn20_resource_construct, which gets called during driver
initialization.
Enabling FPU operation disables preemption. Sleeping functions(mutex
(un)lock, memory allocation using GFP_KERNEL, etc.) should not be called
when preemption is disabled.
Fixes the following case caught by enabling
CONFIG_DEBUG_ATOMIC_SLEEP in kernel config
[ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd
[ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3
[ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
[ 1.356360] Call Trace:
[ 1.356361] dump_stack+0x6b/0x86
[ 1.356366] ___might_sleep.cold+0x87/0x98
[ 1.356370] __might_sleep+0x4b/0x80
[ 1.356372] mutex_lock+0x21/0x50
[ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu]
[ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu]
[ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu]
[ 1.356892] ? create_object+0x20d/0x340
[ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu]
[ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu]
...
Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1)
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vitaly Kuznetsov [Tue, 12 Oct 2021 15:50:05 +0000 (17:50 +0200)]
x86/hyperv: Protect set_hv_tscchange_cb() against getting preempted
[ Upstream commit
285f68afa8b20f752b0b7194d54980b5e0e27b75 ]
The following issue is observed with CONFIG_DEBUG_PREEMPT when KVM loads:
KVM: vmx: using Hyper-V Enlightened VMCS
BUG: using smp_processor_id() in preemptible [
00000000] code: systemd-udevd/488
caller is set_hv_tscchange_cb+0x16/0x80
CPU: 1 PID: 488 Comm: systemd-udevd Not tainted 5.15.0-rc5+ #396
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
Call Trace:
dump_stack_lvl+0x6a/0x9a
check_preemption_disabled+0xde/0xe0
? kvm_gen_update_masterclock+0xd0/0xd0 [kvm]
set_hv_tscchange_cb+0x16/0x80
kvm_arch_init+0x23f/0x290 [kvm]
kvm_init+0x30/0x310 [kvm]
vmx_init+0xaf/0x134 [kvm_intel]
...
set_hv_tscchange_cb() can get preempted in between acquiring
smp_processor_id() and writing to HV_X64_MSR_REENLIGHTENMENT_CONTROL. This
is not an issue by itself: HV_X64_MSR_REENLIGHTENMENT_CONTROL is a
partition-wide MSR and it doesn't matter which particular CPU will be
used to receive reenlightenment notifications. The only real problem can
(in theory) be observed if the CPU whose id was acquired with
smp_processor_id() goes offline before we manage to write to the MSR,
the logic in hv_cpu_die() won't be able to reassign it correctly.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211012155005.1613352-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 26 Oct 2021 21:30:14 +0000 (14:30 -0700)]
inet: remove races in inet{6}_getname()
[ Upstream commit
9dfc685e0262d4c5e44e13302f89841fa75173ca ]
syzbot reported data-races in inet_getname() multiple times,
it is time we fix this instead of pretending applications
should not trigger them.
getsockname() and getpeername() are not really considered fast path.
v2: added the missing BPF_CGROUP_RUN_SA_PROG() declaration
needed when CONFIG_CGROUP_BPF=n, as reported by
kernel test robot <lkp@intel.com>
syzbot typical report:
BUG: KCSAN: data-race in __inet_hash_connect / inet_getname
write to 0xffff888136d66cf8 of 2 bytes by task 14374 on cpu 1:
__inet_hash_connect+0x7ec/0x950 net/ipv4/inet_hashtables.c:831
inet_hash_connect+0x85/0x90 net/ipv4/inet_hashtables.c:853
tcp_v4_connect+0x782/0xbb0 net/ipv4/tcp_ipv4.c:275
__inet_stream_connect+0x156/0x6e0 net/ipv4/af_inet.c:664
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:728
__sys_connect_file net/socket.c:1896 [inline]
__sys_connect+0x254/0x290 net/socket.c:1913
__do_sys_connect net/socket.c:1923 [inline]
__se_sys_connect net/socket.c:1920 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:1920
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888136d66cf8 of 2 bytes by task 14408 on cpu 0:
inet_getname+0x11f/0x170 net/ipv4/af_inet.c:790
__sys_getsockname+0x11d/0x1b0 net/socket.c:1946
__do_sys_getsockname net/socket.c:1961 [inline]
__se_sys_getsockname net/socket.c:1958 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:1958
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000 -> 0xdee0
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14408 Comm: syz-executor.3 Not tainted 5.15.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211026213014.3026708-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
王贇 [Wed, 27 Oct 2021 03:15:11 +0000 (11:15 +0800)]
ftrace: do CPU checking after preemption disabled
[ Upstream commit
d33cc657372366a8959f099c619a208b4c5dc664 ]
With CONFIG_DEBUG_PREEMPT we observed reports like:
BUG: using smp_processor_id() in preemptible
caller is perf_ftrace_function_call+0x6f/0x2e0
CPU: 1 PID: 680 Comm: a.out Not tainted
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
check_preemption_disabled+0x104/0x110
? optimize_nops.isra.7+0x230/0x230
? text_poke_bp_batch+0x9f/0x310
perf_ftrace_function_call+0x6f/0x2e0
...
__text_poke+0x5/0x620
text_poke_bp_batch+0x9f/0x310
This telling us the CPU could be changed after task is preempted, and
the checking on CPU before preemption will be invalid.
Since now ftrace_test_recursion_trylock() will help to disable the
preemption, this patch just do the checking after trylock() to address
the issue.
Link: https://lkml.kernel.org/r/54880691-5fe2-33e7-d12f-1fa6136f5183@linux.alibaba.com
CC: Steven Rostedt <rostedt@goodmis.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bryan O'Donoghue [Mon, 25 Oct 2021 09:30:37 +0000 (10:30 +0100)]
Revert "wcn36xx: Enable firmware link monitoring"
[ Upstream commit
43ea9bd84f27d06482cc823d9749cc9dd2993bc8 ]
Firmware link offload monitoring can be made to work in 3/4 cases by
switching on firmware feature bit WLANACTIVE_OFFLOAD
- Secure power-save on
- Secure power-save off
- Open power-save on
However, with an open AP if we switch off power-saving - thus never
entering Beacon Mode Power Save - BMPS, firmware never forwards loss
of beacon upwards.
We had hoped that WLANACTIVE_OFFLOAD and some fixes for sequence numbers
would unblock this but, it hasn't and further investigation is required.
Its possible to have a complete set of Secure power-save on/off and Open
power-save on/off provided we use Linux' link monitoring mechanism.
While we debug the Open AP failure we need to fix upstream.
This reverts commit
c973fdad79f6eaf247d48b5fc77733e989eb01e1.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211025093037.3966022-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Mon, 25 Oct 2021 08:28:16 +0000 (10:28 +0200)]
wcn36xx: Fix packet drop on resume
[ Upstream commit
df0697801d8aa2eebfe7f0b7388879639f8fe7cc ]
If the system is resumed because of an incoming packet, the wcn36xx RX
interrupts is fired before actual resuming of the wireless/mac80211
stack, causing any received packets to be simply dropped. E.g. a ping
request causes a system resume, but is dropped and so never forwarded
to the IP stack.
This change fixes that, disabling DMA interrupts on suspend to no pass
packets until mac80211 is resumed and ready to handle them.
Note that it's not incompatible with RX irq wake.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635150496-19290-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Mon, 18 Oct 2021 10:57:57 +0000 (12:57 +0200)]
wcn36xx: Correct band/freq reporting on RX
[ Upstream commit
8a27ca39478270e07baf9c09aa0c99709769ba03 ]
For packets originating from hardware scan, the channel and band is
included in the buffer descriptor (bd->rf_band & bd->rx_ch).
For 2Ghz band the channel value is directly reported in the 4-bit
rx_ch field. For 5Ghz band, the rx_ch field contains a mapping
index (given the 4-bit limitation).
The reserved0 value field is also used to extend 4-bit mapping to
5-bit mapping to support more than 16 5Ghz channels.
This change adds correct reporting of the frequency/band, that is
used in scan mechanism. And is required for 5Ghz hardware scan
support.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634554678-7993-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Mon, 18 Oct 2021 07:34:13 +0000 (15:34 +0800)]
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
[ Upstream commit
ca9b8f56ec089d3a436050afefd17b7237301f47 ]
Fix the missing clk_disable_unprepare() before return
from bcm_qspi_probe() in the error handling case.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211018073413.2029081-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Tue, 27 Jul 2021 21:01:14 +0000 (17:01 -0400)]
btrfs: do not take the uuid_mutex in btrfs_rm_device
[ Upstream commit
8ef9dc0f14ba6124c62547a4fdc59b163d8b864e ]
We got the following lockdep splat while running fstests (specifically
btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered
by
87579e9b7d8d ("loop: use worker per cgroup instead of kworker") which
converted loop to using workqueues, which comes with lockdep
annotations that don't exist with kworkers. The lockdep splat is as
follows:
WARNING: possible circular locking dependency detected
5.14.0-rc2-custom+ #34 Not tainted
------------------------------------------------------
losetup/156417 is trying to acquire lock:
ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600
but task is already holding lock:
ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #5 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x28/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x163/0x3a0
path_openat+0x74d/0xa40
do_filp_open+0x9c/0x140
do_sys_openat2+0xb1/0x170
__x64_sys_openat+0x54/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #4 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
blkdev_get_by_dev.part.0+0xd1/0x3c0
blkdev_get_by_path+0xc0/0xd0
btrfs_scan_one_device+0x52/0x1f0 [btrfs]
btrfs_control_ioctl+0xac/0x170 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (uuid_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
btrfs_rm_device+0x48/0x6a0 [btrfs]
btrfs_ioctl+0x2d1c/0x3110 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#11){.+.+}-{0:0}:
lo_write_bvec+0x112/0x290 [loop]
loop_process_work+0x25f/0xcb0 [loop]
process_one_work+0x28f/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x266/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
flush_workqueue+0xae/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/156417:
#0:
ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
stack backtrace:
CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0x10a/0x120
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
? flush_workqueue+0x84/0x600
flush_workqueue+0xae/0x600
? flush_workqueue+0x84/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
? __lock_acquire+0x3a0/0x1dc0
? update_dl_rq_load_avg+0x152/0x360
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f645884de6b
Usually the uuid_mutex exists to protect the fs_devices that map
together all of the devices that match a specific uuid. In rm_device
we're messing with the uuid of a device, so it makes sense to protect
that here.
However in doing that it pulls in a whole host of lockdep dependencies,
as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus
we end up with the dependency chain under the uuid_mutex being added
under the normal sb write dependency chain, which causes problems with
loop devices.
We don't need the uuid mutex here however. If we call
btrfs_scan_one_device() before we scratch the super block we will find
the fs_devices and not find the device itself and return EBUSY because
the fs_devices is open. If we call it after the scratch happens it will
not appear to be a valid btrfs file system.
We do not need to worry about other fs_devices modifying operations here
because we're protected by the exclusive operations locking.
So drop the uuid_mutex here in order to fix the lockdep splat.
A more detailed explanation from the discussion:
We are worried about rm and scan racing with each other, before this
change we'll zero the device out under the UUID mutex so when scan does
run it'll make sure that it can go through the whole device scan thing
without rm messing with us.
We aren't worried if the scratch happens first, because the result is we
don't think this is a btrfs device and we bail out.
The only case we are concerned with is we scratch _after_ scan is able
to read the superblock and gets a seemingly valid super block, so lets
consider this case.
Scan will call device_list_add() with the device we're removing. We'll
call find_fsid_with_metadata_uuid() and get our fs_devices for this
UUID. At this point we lock the fs_devices->device_list_mutex. This is
what protects us in this case, but we have two cases here.
1. We aren't to the device removal part of the RM. We found our device,
and device name matches our path, we go down and we set total_devices
to our super number of devices, which doesn't affect anything because
we haven't done the remove yet.
2. We are past the device removal part, which is protected by the
device_list_mutex. Scan doesn't find the device, it goes down and
does the
if (fs_devices->opened)
return -EBUSY;
check and we bail out.
Nothing about this situation is ideal, but the lockdep splat is real,
and the fix is safe, tho admittedly a bit scary looking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more from the discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sidong Yang [Thu, 26 Aug 2021 14:44:36 +0000 (14:44 +0000)]
btrfs: reflink: initialize return value to 0 in btrfs_extent_same()
[ Upstream commit
44bee215f72f13874c0e734a0712c2e3264c0108 ]
Fix a warning reported by smatch that ret could be returned without
initialized. The dedupe operations are supposed to to return 0 for a 0
length range but the caller does not pass olen == 0. To keep this
behaviour and also fix the warning initialize ret to 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Wang [Mon, 25 Oct 2021 06:16:01 +0000 (14:16 +0800)]
ACPI: resources: Add one more Medion model in IRQ override quirk
[ Upstream commit
1b26ae40092b43bb6e9c5df376227382b390b953 ]
The Medion s17 series laptops have the same issue on the keyboard
as the s15 series, if skipping to call acpi_get_override_irq(), the
keyboard could work well. So put the DMI info of s17 series in the
IRQ override quirk table as well.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Tested-by: dirksche <dirksche@posteo.de>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Schaeckeler [Sun, 24 Oct 2021 22:04:45 +0000 (15:04 -0700)]
ACPI: AC: Quirk GK45 to skip reading _PSR
[ Upstream commit
3d730ee686800d71ecc5c3cb8460dcdcdeaf38a3 ]
Let GK45 not go into BIOS for determining the AC power state.
The BIOS wrongly returns 0, so hardcode the power state to 1.
The mini PC GK45 by Besstar Tech Lld. (aka Kodlix) just runs
off AC. It does not include any batteries. Nevertheless BIOS
reports AC off:
root@kodlix:/usr/src/linux# cat /sys/class/power_supply/ADP1/online
0
root@kodlix:/usr/src/linux# modprobe acpi_dbg
root@kodlix:/usr/src/linux# tools/power/acpi/acpidbg
- find _PSR
\_SB.PCI0.SBRG.H_EC.ADP1._PSR Method
000000009283cee8 001 Args 0 Len 001C Aml
00000000f54e5f67
- execute \_SB.PCI0.SBRG.H_EC.ADP1._PSR
Evaluating \_SB.PCI0.SBRG.H_EC.ADP1._PSR
Evaluation of \_SB.PCI0.SBRG.H_EC.ADP1._PSR returned object
00000000dc08c187, external buffer length 18
[Integer] =
0000000000000000
that should be
[Integer] =
0000000000000001
Signed-off-by: Stefan Schaeckeler <schaecsn@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 25 Oct 2021 18:15:55 +0000 (11:15 -0700)]
net: annotate data-race in neigh_output()
[ Upstream commit
d18785e213866935b4c3dc0c33c3e18801ce0ce8 ]
neigh_output() reads n->nud_state and hh->hh_len locklessly.
This is fine, but we need to add annotations and document this.
We evaluate skip_cache first to avoid reading these fields
if the cache has to by bypassed.
syzbot report:
BUG: KCSAN: data-race in __neigh_event_send / ip_finish_output2
write to 0xffff88810798a885 of 1 bytes by interrupt on cpu 1:
__neigh_event_send+0x40d/0xac0 net/core/neighbour.c:1128
neigh_event_send include/net/neighbour.h:444 [inline]
neigh_resolve_output+0x104/0x410 net/core/neighbour.c:1476
neigh_output include/net/neighbour.h:510 [inline]
ip_finish_output2+0x80a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
secondary_startup_64_no_verify+0xb1/0xbb
read to 0xffff88810798a885 of 1 bytes by interrupt on cpu 0:
neigh_output include/net/neighbour.h:507 [inline]
ip_finish_output2+0x79a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
rest_init+0xee/0x100 init/main.c:734
arch_call_rest_init+0xa/0xb
start_kernel+0x5e4/0x669 init/main.c:1142
secondary_startup_64_no_verify+0xb1/0xbb
value changed: 0x20 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Mon, 25 Oct 2021 14:14:00 +0000 (16:14 +0200)]
vrf: run conntrack only in context of lower/physdev for locally generated packets
[ Upstream commit
8c9c296adfae9ea05f655d69e9f6e13daa86fb4a ]
The VRF driver invokes netfilter for output+postrouting hooks so that users
can create rules that check for 'oif $vrf' rather than lower device name.
This is a problem when NAT rules are configured.
To avoid any conntrack involvement in round 1, tag skbs as 'untracked'
to prevent conntrack from picking them up.
This gets cleared before the packet gets handed to the ip stack so
conntrack will be active on the second iteration.
One remaining issue is that a rule like
output ... oif $vrfname notrack
won't propagate to the second round because we can't tell
'notrack set via ruleset' and 'notrack set by vrf driver' apart.
However, this isn't a regression: the 'notrack' removal happens
instead of unconditional nf_reset_ct().
I'd also like to avoid leaking more vrf specific conditionals into the
netfilter infra.
For ingress, conntrack has already been done before the packet makes it
to the vrf driver, with this patch egress does connection tracking with
lower/physical device as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viktor Rosendahl [Tue, 19 Oct 2021 16:07:01 +0000 (18:07 +0200)]
tools/latency-collector: Use correct size when writing queue_full_warning
[ Upstream commit
f604de20c0a47e0e9518940a1810193678c92fa8 ]
queue_full_warning is a pointer, so it is wrong to use sizeof to calculate
the number of characters of the string it points to. The effect is that we
only print out the first few characters of the warning string.
The correct way is to use strlen(). We don't need to add 1 to the strlen()
because we don't want to write the terminating null character to stdout.
Link: https://lkml.kernel.org/r/20211019160701.15587-1-Viktor.Rosendahl@bmw.de
Link: https://lore.kernel.org/r/8fd4bb65ef3da67feac9ce3258cdbe9824752cf1.1629198502.git.jing.yangyang@zte.com.cn
Link: https://lore.kernel.org/r/20211012025424.180781-1-davidcomponentone@gmail.com
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 18 Oct 2021 14:30:06 +0000 (15:30 +0100)]
ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
[ Upstream commit
345dac33f58894a56d17b92a41be10e16585ceff ]
When configuring the kernel for big-endian, we set either BE-8 or BE-32
based on the CPU architecture level. Until linux-4.4, we did not have
any ARMv7-M platform allowing big-endian builds, but now i.MX/Vybrid
is in that category, adn we get a build error because of this:
arch/arm/kernel/module-plts.c: In function 'get_module_plt':
arch/arm/kernel/module-plts.c:60:46: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
This comes down to picking the wrong default, ARMv7-M uses BE8
like ARMv7-A does. Changing the default gets the kernel to compile
and presumably works.
https://lore.kernel.org/all/
1455804123-2526139-2-git-send-email-arnd@arndb.de/
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 7 Oct 2021 13:57:44 +0000 (15:57 +0200)]
gfs2: Fix glock_hash_walk bugs
[ Upstream commit
7427f3bb49d81525b7dd1d0f7c5f6bbc752e6f0e ]
So far, glock_hash_walk took a reference on each glock it iterated over, and it
was the examiner's responsibility to drop those references. Dropping the final
reference to a glock can sleep and the examiners are called in a RCU critical
section with spin locks held, so examiners that didn't need the extra reference
had to drop it asynchronously via gfs2_glock_queue_put or similar. This wasn't
done correctly in thaw_glock which did call gfs2_glock_put, and not at all in
dump_glock_func.
Change glock_hash_walk to not take glock references at all. That way, the
examiners that don't need them won't have to bother with slow asynchronous
puts, and the examiners that do need references can take them themselves.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Mon, 11 Oct 2021 18:53:02 +0000 (20:53 +0200)]
gfs2: Cancel remote delete work asynchronously
[ Upstream commit
486408d690e130c3adacf816754b97558d715f46 ]
In gfs2_inode_lookup and gfs2_create_inode, we're calling
gfs2_cancel_delete_work which currently cancels any remote delete work
(delete_work_func) synchronously. This means that if the work is
currently running, it will wait for it to finish. We're doing this to
pevent a previous instance of an inode from having any influence on the
next instance.
However, delete_work_func uses gfs2_inode_lookup internally, and we can
end up in a deadlock when delete_work_func gets interrupted at the wrong
time. For example,
(1) An inode's iopen glock has delete work queued, but the inode
itself has been evicted from the inode cache.
(2) The delete work is preempted before reaching gfs2_inode_lookup.
(3) Another process recreates the inode (gfs2_create_inode). It tries
to cancel any outstanding delete work, which blocks waiting for
the ongoing delete work to finish.
(4) The delete work calls gfs2_inode_lookup, which blocks waiting for
gfs2_create_inode to instantiate and unlock the new inode =>
deadlock.
It turns out that when the delete work notices that its inode has been
re-instantiated, it will do nothing. This means that it's safe to
cancel the delete work asynchronously. This prevents the kind of
deadlock described above.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Kleine-Budde [Wed, 13 Oct 2021 13:00:10 +0000 (15:00 +0200)]
can: bittiming: can_fixup_bittiming(): change type of tseg1 and alltseg to unsigned int
[ Upstream commit
e346290439609a8ac67122418ca2efbad8d0a7e7 ]
All timing calculation is done with unsigned integers, so change type
of tseg1 and alltseg to unsigned int, too.
Link: https://lore.kernel.org/all/20211013130653.1513627-1-mkl@pengutronix.de
Link: https://github.com/linux-can/can-utils/pull/314
Reported-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Suryaputra [Wed, 20 Oct 2021 20:06:18 +0000 (16:06 -0400)]
gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE
[ Upstream commit
61e18ce7348bfefb5688a8bcd4b4d6b37c0f9b2a ]
When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.
Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: Antonio Quartulli <a@unstable.cc>
Link: https://lore.kernel.org/r/20211020200618.467342-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Thu, 21 Oct 2021 00:55:17 +0000 (09:55 +0900)]
ARM: clang: Do not rely on lr register for stacktrace
[ Upstream commit
b3ea5d56f212ad81328c82454829a736197ebccc ]
Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.
As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.
Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tetsuo Handa [Tue, 19 Oct 2021 11:54:31 +0000 (20:54 +0900)]
smackfs: use __GFP_NOFAIL for smk_cipso_doi()
[ Upstream commit
f91488ee15bd3cac467e2d6a361fc2d34d1052ae ]
syzbot is reporting kernel panic at smk_cipso_doi() due to memory
allocation fault injection [1]. The reason for need to use panic() was
not explained. But since no fix was proposed for 18 months, for now
let's use __GFP_NOFAIL for utilizing syzbot resource on other bugs.
Link: https://syzkaller.appspot.com/bug?extid=89731ccb6fec15ce1c22
Reported-by: syzbot <syzbot+89731ccb6fec15ce1c22@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Sun, 17 Oct 2021 08:43:40 +0000 (11:43 +0300)]
iwlwifi: mvm: disable RX-diversity in powersave
[ Upstream commit
e5322b9ab5f63536c41301150b7ce64605ce52cc ]
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Olsa [Thu, 21 Oct 2021 11:41:30 +0000 (13:41 +0200)]
selftests/bpf: Fix perf_buffer test on system with offline cpus
[ Upstream commit
d4121376ac7a9c81a696d7558789b2f29ef3574e ]
The perf_buffer fails on system with offline cpus:
# test_progs -t perf_buffer
test_perf_buffer:PASS:nr_cpus 0 nsec
test_perf_buffer:PASS:nr_on_cpus 0 nsec
test_perf_buffer:PASS:skel_load 0 nsec
test_perf_buffer:PASS:attach_kprobe 0 nsec
test_perf_buffer:PASS:perf_buf__new 0 nsec
test_perf_buffer:PASS:epoll_fd 0 nsec
skipping offline CPU #24
skipping offline CPU #25
skipping offline CPU #26
skipping offline CPU #27
skipping offline CPU #28
skipping offline CPU #29
skipping offline CPU #30
skipping offline CPU #31
test_perf_buffer:PASS:perf_buffer__poll 0 nsec
test_perf_buffer:PASS:seen_cpu_cnt 0 nsec
test_perf_buffer:FAIL:buf_cnt got 24, expected 32
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Changing the test to check online cpus instead of possible.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuah Khan [Thu, 21 Oct 2021 17:56:03 +0000 (11:56 -0600)]
selftests: kvm: fix mismatched fclose() after popen()
[ Upstream commit
c3867ab5924b7a9a0b4a117902a08669d8be7c21 ]
get_warnings_count() does fclose() using File * returned from popen().
Fix it to call pclose() as it should.
tools/testing/selftests/kvm/x86_64/mmio_warning_test
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’:
x86_64/mmio_warning_test.c:87:9: warning: ‘fclose’ called on pointer returned from a mismatched allocation function [-Wmismatched-dealloc]
87 | fclose(f);
| ^~~~~~~~~
x86_64/mmio_warning_test.c:84:13: note: returned from ‘popen’
84 | f = popen("dmesg | grep \"WARNING:\" | wc -l", "r");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Wed, 13 Oct 2021 12:19:14 +0000 (20:19 +0800)]
PM: hibernate: Get block device exclusively in swsusp_check()
[ Upstream commit
39fbef4b0f77f9c89c8f014749ca533643a37c9f ]
The following kernel crash can be triggered:
[ 89.266592] ------------[ cut here ]------------
[ 89.267427] kernel BUG at fs/buffer.c:3020!
[ 89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20
[ 89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0
[ 89.277157] RSP: 0018:
ffff888105ddfd08 EFLAGS:
00010246
[ 89.278093] RAX:
0000000000000005 RBX:
ffff888124231498 RCX:
ffffffffb2772612
[ 89.279332] RDX:
1ffff11024846293 RSI:
0000000000000008 RDI:
ffff888124231498
[ 89.280591] RBP:
ffff8881248cc000 R08:
0000000000000001 R09:
ffffed1024846294
[ 89.281851] R10:
ffff88812423149f R11:
ffffed1024846293 R12:
0000000000003800
[ 89.283095] R13:
0000000000000001 R14:
0000000000000000 R15:
ffff8881161f7000
[ 89.284342] FS:
0000000000000000(0000) GS:
ffff88839b5c0000(0000) knlGS:
0000000000000000
[ 89.285711] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 89.286701] CR2:
00007f166ebc01a0 CR3:
0000000435c0e000 CR4:
00000000000006e0
[ 89.287919] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 89.289138] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 89.290368] Call Trace:
[ 89.290842] write_mmp_block+0x2ca/0x510
[ 89.292218] kmmpd+0x433/0x9a0
[ 89.294902] kthread+0x2dd/0x3e0
[ 89.296268] ret_from_fork+0x22/0x30
[ 89.296906] Modules linked in:
by running the following commands:
1. mkfs.ext4 -O mmp /dev/sda -b 1024
2. mount /dev/sda /home/test
3. echo "/dev/sda" > /sys/power/resume
That happens because swsusp_check() calls set_blocksize() on the
target partition which confuses the file system:
Thread1 Thread2
mount /dev/sda /home/test
get s_mmp_bh --> has mapped flag
start kmmpd thread
echo "/dev/sda" > /sys/power/resume
resume_store
software_resume
swsusp_check
set_blocksize
truncate_inode_pages_range
truncate_cleanup_page
block_invalidatepage
discard_buffer --> clean mapped flag
write_mmp_block
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh))
To address this issue, modify swsusp_check() to open the target block
device with exclusive access.
Signed-off-by: Ye Bin <yebin10@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nick Desaulniers [Tue, 19 Oct 2021 22:36:45 +0000 (15:36 -0700)]
arm64: vdso32: suppress error message for 'make mrproper'
[ Upstream commit
14831fad73f5ac30ac61760487d95a538e6ab3cb ]
When running the following command without arm-linux-gnueabi-gcc in
one's $PATH, the following warning is observed:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 mrproper
make[1]: arm-linux-gnueabi-gcc: No such file or directory
This is because KCONFIG is not run for mrproper, so CONFIG_CC_IS_CLANG
is not set, and we end up eagerly evaluating various variables that try
to invoke CC_COMPAT.
This is a similar problem to what was observed in
commit
dc960bfeedb0 ("h8300: suppress error messages for 'make clean'")
Reported-by: Lucas Henneman <henneman@google.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-4-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Yang [Tue, 12 Oct 2021 11:16:49 +0000 (19:16 +0800)]
samples/bpf: Fix application of sizeof to pointer
[ Upstream commit
b599015f044df53e93ad0a2957b615bc1a26bf73 ]
The coccinelle check report:
"./samples/bpf/xdp_redirect_cpu_user.c:397:32-38:
ERROR: application of sizeof to pointer"
Using the "strlen" to fix it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211012111649.983253-1-davidcomponentone@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hannes Reinecke [Wed, 20 Oct 2021 05:59:10 +0000 (07:59 +0200)]
nvme: drop scan_lock and always kick requeue list when removing namespaces
[ Upstream commit
2b81a5f015199f3d585ce710190a9e87714d3c1e ]
When reading the partition table on initial scan hits an I/O error the
I/O will hang with the scan_mutex held:
[<0>] do_read_cache_page+0x49b/0x790
[<0>] read_part_sector+0x39/0xe0
[<0>] read_lba+0xf9/0x1d0
[<0>] efi_partition+0xf1/0x7f0
[<0>] bdev_disk_changed+0x1ee/0x550
[<0>] blkdev_get_whole+0x81/0x90
[<0>] blkdev_get_by_dev+0x128/0x2e0
[<0>] device_add_disk+0x377/0x3c0
[<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core]
[<0>] nvme_alloc_ns+0x417/0x950 [nvme_core]
[<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core]
[<0>] nvme_scan_work+0x168/0x310 [nvme_core]
[<0>] process_one_work+0x231/0x420
and trying to delete the controller will deadlock as it tries to grab
the scan mutex:
[<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core]
[<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core]
[<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core]
As we're now properly ordering the namespace list there is no need to
hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore.
And we always need to kick the requeue list as the path will be marked
as unusable and I/O will be requeued _without_ a current path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Israel Rukshin [Wed, 6 Oct 2021 08:09:45 +0000 (08:09 +0000)]
nvmet-tcp: fix use-after-free when a port is removed
[ Upstream commit
2351ead99ce9164fb42555aee3f96af84c4839e9 ]
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy
the remaining queues after the accept_work was cancelled guarantees
that no new queue will be created.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Israel Rukshin [Wed, 6 Oct 2021 08:09:44 +0000 (08:09 +0000)]
nvmet-rdma: fix use-after-free when a port is removed
[ Upstream commit
fcf73a804c7d6bbf0ea63531c6122aa363852e04 ]
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy the
remaining queues after the RDMA-CM was destroyed guarantees that no
new queue will be created.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Israel Rukshin [Wed, 6 Oct 2021 08:09:43 +0000 (08:09 +0000)]
nvmet: fix use-after-free when a port is removed
[ Upstream commit
e3e19dcc4c416d65f99f13d55be2b787f8d0050e ]
When a port is removed through configfs, any connected controllers
are starting teardown flow asynchronously and can still send commands.
This causes a use-after-free bug for any command that dereferences
req->port (like in nvmet_parse_io_cmd).
To fix this, wait for all the teardown scheduled works to complete
(like release_work at rdma/tcp drivers). This ensures there are no
active controllers when the port is eventually removed.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Mon, 4 Oct 2021 15:33:00 +0000 (11:33 -0400)]
drm/amdgpu/pm: properly handle sclk for profiling modes on vangogh
[ Upstream commit
68e3871dcd6e547f6c47454492bc452356cb9eac ]
When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels. Select the proper
sclk settings for all levels.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Tretter [Wed, 8 Sep 2021 13:03:10 +0000 (14:03 +0100)]
media: allegro: ignore interrupt if mailbox is not initialized
[ Upstream commit
1ecda6393db4be44aba27a243e648dc98c9b92e3 ]
The mailbox is initialized after the interrupt handler is installed. As
the firmware is loaded and started even later, it should not happen that
the interrupt occurs without the mailbox being initialized.
As the Linux Driver Verification project (linuxtesting.org) keeps
reporting this as an error, add a check to ignore interrupts before the
mailbox is initialized to fix this potential null pointer dereference.
Reported-by: Yuri Savinykh <s02190703@gse.cs.msu.ru>
Reported-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens Axboe [Wed, 20 Oct 2021 14:21:40 +0000 (08:21 -0600)]
block: remove inaccurate requeue check
[ Upstream commit
037057a5a979c7eeb2ee5d12cf4c24b805192c75 ]
This check is meant to catch cases where a requeue is attempted on a
request that is still inserted. It's never really been useful to catch any
misuse, and now it's actively wrong. Outside of that, this should not be a
BUG_ON() to begin with.
Remove the check as it's now causing active harm, as requeue off the plug
path will trigger it even though the request state is just fine.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/linux-block/CAHj4cs80zAUc2grnCZ015-2Rvd-=gXRfB_dFKy=RTm+wRo09HQ@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yaara Baruch [Sat, 16 Oct 2021 08:43:56 +0000 (11:43 +0300)]
iwlwifi: change all JnP to NO-160 configuration
[ Upstream commit
70382b0897eeecfcd35ba5f6161dbceeb556ea1e ]
JnP should not have the 160 MHz.
Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.ee163f4a7513.I7f87bd969a0b038c7f3a1a962d9695ffd18c5da1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Sat, 16 Oct 2021 04:02:59 +0000 (04:02 +0000)]
mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
[ Upstream commit
257051a235c17e33782b6e24a4b17f2d7915aaec ]
When the driver fails to request the firmware, it calls its error
handler. In the error handler, the driver detaches device from driver
first before releasing the firmware, which can cause a use-after-free bug.
Fix this by releasing firmware first.
The following log reveals it:
[ 9.007301 ] BUG: KASAN: use-after-free in mwl8k_fw_state_machine+0x320/0xba0
[ 9.010143 ] Workqueue: events request_firmware_work_func
[ 9.010830 ] Call Trace:
[ 9.010830 ] dump_stack_lvl+0xa8/0xd1
[ 9.010830 ] print_address_description+0x87/0x3b0
[ 9.010830 ] kasan_report+0x172/0x1c0
[ 9.010830 ] ? mutex_unlock+0xd/0x10
[ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] __asan_report_load8_noabort+0x14/0x20
[ 9.010830 ] mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] ? mwl8k_load_firmware+0x5f0/0x5f0
[ 9.010830 ] request_firmware_work_func+0x172/0x250
[ 9.010830 ] ? read_lock_is_recursive+0x20/0x20
[ 9.010830 ] ? process_one_work+0x7a1/0x1100
[ 9.010830 ] ? request_firmware_nowait+0x460/0x460
[ 9.010830 ] ? __this_cpu_preempt_check+0x13/0x20
[ 9.010830 ] process_one_work+0x9bb/0x1100
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634356979-6211-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryder Lee [Wed, 14 Jul 2021 07:56:10 +0000 (15:56 +0800)]
mt76: mt7915: fix an off-by-one bound check
[ Upstream commit
d45dac0732a287fc371a23f257cce04e65627947 ]
The bounds check on datalen is off-by-one, so fix it.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log