media: mxl692: remove impossible condition

Fix the following coverity warning:

This greater-than-or-equal-to-zero comparison of an unsigned value is
always true. "opcode >= 0".

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dvb-usb: avoid -Wempty-body warnings

Building with 'make W=1' shows many warnings -Wempty-body warnings like

drivers/media/usb/dvb-usb/vp702x-fe.c: In function 'vp702x_fe_set_frontend':
drivers/media/usb/dvb-usb/vp702x-fe.c:190:46: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  190 |                 deb_fe("tuning succeeded.\n");
drivers/media/usb/dvb-usb/dtt200u.c: In function 'dtt200u_rc_query':
drivers/media/usb/dvb-usb/dtt200u.c:124:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  124 |                 deb_info("st->data: %*ph\n", 5, st->data);
drivers/media/usb/dvb-usb/m920x.c: In function 'm920x_rc_query':
drivers/media/usb/dvb-usb/m920x.c:207:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  207 |                 deb("Unknown rc key %02x\n", rc_state[1]);

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: flexcop: avoid -Wempty-body warning

Building with 'make W=1' shows many warnings -Wempty-body warnings like

drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
   35 |                 deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");

drivers/media/usb/b2c2/flexcop-usb.c: In function 'flexcop_usb_process_frame':
drivers/media/usb/b2c2/flexcop-usb.c:357:79: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  357 |                                         deb_ts("not ts packet %*ph\n", 4, b+2);
      |                                                                               ^
drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
   35 |                 deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
      |                                                                                     ^

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ite-cir: probe of ITE8708 on ASUS PN50 fails

The Asus PN50 has 16 byte io region for the ITE8708 in its DSDT, which
causes the probe fail. So, accept larger regions.

Link: https://www.spinics.net/lists/linux-media/msg177725.html
Cc: Nikolaos Beredimas <beredim@gmail.com>
Reported-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: IR: Add H616 IR compatible string

Add the obvious compatible name to the existing IR binding, and pair
it with the existing A31 fallback compatible string, as the devices
are compatible.

On the way use enums to group all compatible devices together.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: ir-hix5hd2: use the correct HiSilicon copyright

s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.

Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: remove zte zx ir driver

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dvb-usb: fix memory leak in dvb_usb_adapter_init

syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().

for (n = 0; n < d->props.num_adapters; n++) {
....
if ((ret = dvb_usb_adapter_stream_init(adap)) ||
(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
(ret = dvb_usb_adapter_frontend_init(adap))) {
return ret;
}
...
d->num_adapters_initialized++;
...
}

In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:

for (n = 0; n < d->num_adapters_initialized; n++)

So, allocated objects won't be freed.

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+3c2be7424cea3b932b0e@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: add keymaps for mecool-kii-pro/kiii-pro remotes

Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.

Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dvb-usb-remote: fix dvb_usb_nec_rc_key_to_event type mismatch

gcc-11 warns about the prototype not exactly matching the function
definition:

drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
  363 |                 u8 keybuf[5], u32 *event, int *state)
      |                 ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
                 from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
  490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
      |                                                                 ^~~~

Fixes: 776338e121b9 ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dvb-frontends: Remove redundant error check on variable ret

An earlier commit removed a call to lgdt3306a_spectral_inversion and
omitted to remove the error return check. The check on ret is now
redundant and can be removed.

Addresses-Coverity: ("Logically dead code")

Fixes: d4a3fa6652e3 ("media: dvb-frontends: lgdt3306a.c: remove dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cobalt: drop static for sd_fmt

The struct v4l2_subdev_format sd_fmt cannot be static since it can be
written back by the subdev. Just have it on the stack.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: sun8i-di: Fix runtime PM imbalance in deinterlace_start_streaming

pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: platform: sti: Fix runtime PM imbalance in regs_show

pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: imx-jpeg: Fix double free in mxc_jpeg_remove

The video_unregister_device already calls video_device_release,
so remove video_device_release, to avoid a double free, when removing
the module. This showed up in a repeated rmmod/insmod scenario.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: adv7842: fix possible use-after-free in adv7842_remove()

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove()

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: adv7604: fix possible use-after-free in adv76xx_remove()

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: tc358743: fix possible use-after-free in tc358743_remove()

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: don't de-reference NULL pointers at IRQ time

Smatch is warning that:
drivers/media/platform/qcom/venus/hfi_venus.c:1100 venus_isr() warn: variable dereferenced before check 'hdev' (see line 1097)

The logic basically does:
hdev = to_hfi_priv(core);

with is translated to:
hdev = core->priv;

If the IRQ code can receive a NULL pointer for hdev, there's
a bug there, as it will first try to de-reference the pointer,
and then check if it is null.

After looking at the code, it seems that this indeed can happen:
Basically, the venus IRQ thread is started with:
devm_request_threaded_irq()
So, it will only be freed after the driver unbinds.

In order to prevent the IRQ code to work with freed data,
the logic at venus_hfi_destroy() sets core->priv to NULL,
which would make the IRQ code to ignore any pending IRQs.

There is, however a race condition, as core->priv is set
to NULL only after being freed. So, we need also to move the
core->priv = NULL to happen earlier.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: use NULL instead of zero for pointers

As reported by sparse:

drivers/media/platform/qcom/venus/core.c:227:41: warning: Using plain integer as NULL pointer
drivers/media/platform/qcom/venus/core.c:228:34: warning: Using plain integer as NULL pointer

Two vars are using zero instead of NULL for pointers. Not really
an issue, but using NULL makes it clearer that the init data is
expecting a pointer.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update ovti,ov2680.yaml reference

The file name: Documentation/devicetree/bindings/media/i2c/ov2680.yaml
should be, instead: Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml.

Update its cross-reference accordingly.

Fixes: 57226cd8c8bf ("media: dt-bindings: ov2680: convert bindings to yaml")
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update imi,rdacm2x-gmsl.yaml reference

The file name: Documentation/devicetree/bindings/media/i2c/rdacm2x-gmsl.yaml
should be, instead: Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml.

Update its cross-reference accordingly.

Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver")
Fixes: e9f817689789 ("media: dt-bindings: media: i2c: Add bindings for IMI RDACM2x")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: s5p-mfc: Fix kernel-doc entries in s5p_mfc_common.h

Fixes scripts/kernel-doc warnings:

s5p_mfc_common.h:343: warning: Function parameter or member 'fw_buf' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_size' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_base' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_bitmap' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_virt' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'dma_base' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'watchdog_timer' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'fw_get_done' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'risc_on' not described in 's5p_mfc_dev'
s5p_mfc_common.h:714: warning: Function parameter or member 'src_bufs_cnt' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'dst_bufs_cnt' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'pb_count' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'force_frame_type' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'slice_mode' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'slice_size' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'frame_tag' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'scratch_buf_size' not described in 's5p_mfc_ctx'

Reported-by: Hans verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: exynos4-is: Fix kernel-doc entries in fimc-is.h

Fixes scripts/kernel-doc warnings:

fimc-is.h:286: warning: Function parameter or member 'fw' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'memory' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'f_w' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'isp' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'sensor' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'setfile' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'ctrl_handler' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'irq' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'sensor_index' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'i2h_cmd' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'h2i_cmd' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'fd_header' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'config' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'config_index' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'is_p_region' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'is_dma_p_region' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'is_shared_region' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'af' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'debugfs_entry' not described in 'fimc_is'

The f_w field is unused so remove it.

Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: adv7511-v4l2: correctly report EDIDs of 1 block

If the EDID has an odd number of blocks (usually just 1, but the
same problem occurs with 3 blocks), then VIDIOC_G_EDID reported 2
(or 4) blocks. Fix this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: adv7604: support EDIDs up to 4 blocks

While the adv7604/11/12 hardware supported EDIDs up to 4 blocks, the
driver didn't. This patch adds support for this. It also improves support
for EDIDs that do not have a Source Physical Address: in that case the
spa location is set to the first byte of the second block, and the
'physical address' is just the two bytes at that location. This is per
the suggestion in the adv76xx documentation for such EDIDs.

Tested with an adv7604 and adv7612.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: adv7604: fix HPD support for adv7611/12

For the adv7604 the hotplug detect pin is controlled through gpio pins from
the SoC, but the adv7611 and adv7612 control the hotplug detect pin
themselves.

But the driver had no support for this, so the HPD was always high, even
when changing the EDID. Add proper support for this to the driver.

Tested with an adv7612.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Do not require all controls to be present in every request

According to the v4l2 api, it is allowed to skip
setting a control if its contents haven't changed for performance
reasons: userspace should only update the controls that changed from
last frame rather then updating them all. Still some ancient code
that checks for mandatory controls has been left in this driver.

Remove it.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: VIDEO_IMX8_JPEG should depend on ARCH_MXC and not default to m

The i.MX8 QXP/QM integrated JPEG encoder/decoder is only present on
Freescale/NXP i.MX8 QXP and QM SoCs.  Hence add a dependency on
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without i.MX8 support.

Drop the "default m" (which means "default y" if CONFIG_MODULES is not
enabled), as merely enabling CONFIG_COMPILE_TEST should not enable
additional code.

Fixes: 2db16c6ed72ce644 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: em28xx/em28xx.h: Remove duplicate struct declaration

struct em28xx is declared at 219th line.
The declaration here is unnecessary. Remove it.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cx231xx/cx231xx.h: Remove repeated struct declaration

struct cx231xx is declared at 146th line.
The declaration here is unnecessary. Remove it.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: camss: csid: Remove redundant dev_err call in msm_csid_subdev_init()

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: camss: csiphy: Remove redundant dev_err call in msm_csiphy_subdev_init()

There is an error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ti-vpe: sc: remove redundant dev_err call in sc_create()

There is an error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ti-vpe: csc: remove redundant dev_err call in csc_create()

There is an error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: imx-pxp: remove redundant dev_err call in pxp_probe()

There is an error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec/core: clarify rx-arb-lost usage message

The rx-arb-lost error injection command only works with <op> set to 'any'.
Explicitly say so in the usage message.

Also use [] to indicate that the <poll> argument is optional.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: imx-pxp: Remove unneeded of_match_ptr()

i.MX is a DT-only platform, so of_match_ptr() can be safely
removed.

Remove the unneeded of_match_ptr().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: tw68: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'tw68_risc_buffer()' (tw68-risc.c) GFP_KERNEL
can be used because this function is only called from a vb2_ops buf_prepare
function.
The call chain is:
  tw68_video_qops.buf_prepare          (tw68-video.c)
    --> tw68_buf_prepare               (tw68-video.c)
      --> tw68_risc_buffer

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: tw686x: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'tw686x_audio_dma_alloc()' (tw686x-audio.c)
GFP_KERNEL can be used because it is only called from a probe function
and no spinlock is taken in the between.
The call chain is:
  tw686x_probe (tw686x-core.c)
    --> tw686x_audio_init (tw686x-audio.c)
      --> tw686x_audio_dma_alloc (tw686x-audio.c)

When memory is allocated in 'tw686x_memcpy_dma_alloc()' and in
'tw686x_sg_dma_alloc()' (tw686x-video.c) GFP_KERNEL can be used because
these functions are .alloc functions from a tw686x_dma_ops structure.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cx23885: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'cx23885_risc_buffer()' GFP_KERNEL can be used
because this function is only called from a vb2_ops buf_prepare function.
The call chain is:
  cx23885_video_qops.buf_prepare        (cx23885-video.c)
    --> buffer_prepare                  (cx23885-video.c)
      --> cx23885_risc_buffer

When memory is allocated in 'cx23885_risc_databuffer()' GFP_KERNEL can be
used because this function is only called from a function that already uses
GFP_KERNEL or from a vb2_ops buf_prepare
function.
The call chains are:
  snd_cx23885_hw_params                 (cx23885-alsa.c) --> use GFP_KERNEL
    --> cx23885_risc_databuffer

  cx23885_qops.buffer_prepare           (cx23885-417.c)
     or
  dvb_qops.buffer_prepare               (cx23885-dvb.c)
    --> cx23885_buf_prepare
      --> cx23885_risc_databuffer

When memory is allocated in 'cx23885_risc_vbibuffer()' GFP_KERNEL can be
used because this function is only called from a vb2_ops buf_prepare
function.
The call chains are:
  cx23885_vbi_qops.buffer_prepare       (cx23885-vbi.c)
    --> cx23885_risc_vbibuffer

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: Separating mtk encoder driver

MTK H264 Encoder(VENC_SYS) and VP8 Encoder(VENC_LT_SYS) are two
independent hardware instance. They have their owner interrupt,
register mapping, and special clocks.

This patch separates them into two devices. This is a preparing
patch for adding device_link between the larbs and venc-device.
It's mainly for fixing the problem:
https://lkml.org/lkml/2019/9/3/316

Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: mtk-vcodec: Separating mtk vcodec encoder node

Updates binding document since the avc and vp8 hardware encoder in
MT8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
"mediatek,mt8173-vcodec-enc-vp8" and "mediatek,mt8173-vcodec-enc".

This patch is not a compatible change, but we must do this modifaction
because MediaTek IOMMU add the device_link between the smi-larb
device and venc_device, if the venc device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

There is a bit of backward compatibility for avc encoder, the avc
encoder device node still has compatible "mediatek,mt8173-vcodec-enc".

Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ctrls.c: fix race condition in hdl->requests list

When a request is re-inited it will release all control handler
objects that are still in the request. It does that by unbinding
and putting all those objects. When the object is unbound the
obj->req pointer is set to NULL, and the object's unbind op is
called. When the object it put the object's release op is called
to free the memory.

For a request object that contains a control handler that means
that v4l2_ctrl_handler_free() is called in the release op.

A control handler used in a request has a pointer to the main
control handler that is created by the driver and contains the
current state of all controls. If the device is unbound (due to
rmmod or a forced unbind), then that main handler is freed, again
by calling v4l2_ctrl_handler_free(), and any outstanding request
objects that refer to that main handler have to be unbound and put
as well.

It does that by this test:

if (!hdl->req_obj.req && !list_empty(&hdl->requests)) {

I.e. the handler has no pointer to a request, so is the main
handler, and one or more request objects refer to this main
handler.

However, this test is wrong since hdl->req_obj.req is actually
NULL when re-initing a request (the object unbind will set req to
NULL), and the only reason this seemingly worked is that the
requests list is typically empty since the request's unbind op
will remove the handler from the requests list.

But if another thread is at the same time adding a new control
to a request, then there is a race condition where one thread
is removing a control handler object from the requests list and
another thread is adding one. The result is that hdl->requests
is no longer empty and the code thinks that a main handler is
being freed instead of a control handler that is part of a request.

There are two bugs here: first the test for hdl->req_obj.req: this
should be hdl->req_obj.ops since only the main control handler will
have a NULL pointer there.

The second is that adding or deleting request objects from the
requests list of the main handler isn't protected by taking the
main handler's lock.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: John Cox <jc@kynesim.co.uk>
Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Tested-by: John Cox <jc@kynesim.co.uk>
Reported-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vivid: add read-only int32 control

This read-only int32 control is used to test read-only controls in
combination with requests. It is set by the driver to the buffer sequence
counter module 256.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: vdec: Fix decoder cmd STOP issue

Fixes an issue when issuing a stop command to the controller, negating the
following firmware error.

"SFR message from FW: Exception: TID = Unknown IP = 0x3b7dc FA = 0x0
 cause = 0x6"

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: helper: Decide work mode

Decide work mode for encoder and decoder based on different
use-cases.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Increase plat_buf_v6 o/p buffer count.

Presently, minimum buffer count for output buffers for h264 &
hevc codec is kept as 8 which might not be sufficient for
few use cases so increasing the value to 18.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: helpers, hfi, vdec: Set actual plane constraints to FW

Set actual plane alignments to FW with
HFI_PROPERTY_PARAM_UNCOMPRESSED_PLANE_ACTUAL_CONSTRAINTS_INFO to calculate
correct buffer size.

bod: Fixed fall-through error in pkt_session_set_property_6xx() switch
     Ensure setting format constraints on 6xx only

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: helpers: Add internal buffer list for v6

- Internal buffers required by v6 are different than v4,
  add new list of internal buffers for v6.
- Differentiate encoder/decoder buffers for 6xx

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: firmware: Do not toggle WRAPPER_A9SS_SW_RESET on 6xx

Do not toggle the WRAPPER_A9SS_SW_RESET on 6xx.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: pm: Toggle 6xx wrapper power in vcodec_control

When in vcodec_control_v4() on the 4xx path we select between one of two
vcodec cores to toggle power control bits. In 6xx there is only one core
which offsets the relevant control registers to a slightly different
address.

This patch accounts for the address offset for 6xx silicon.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Add 6xx AXI halt logic

This patch takes the downstream AXI halt routine and applies it when
IS_V6() is true.

bod: Converted to readl_poll_timeout()
     Removed poll timeout for LPI register, testing showed the value
     would always timeout and work, so the polling did nothing of value.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core,pm: Vote for min clk freq during venus boot

Vote for min clk frequency for core clks during prepare and enable clocks
at boot sequence. Without this the controller clock runs at very low value
(9.6MHz) which is not sufficient to boot venus.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: pm: Hook 6xx pm ops into 4xx pm ops

At this time there is no need to differentiate between the two, we can
reuse the 4xx pm ops callback structure for 6xx.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locations

In various places in the venus codebase we have if (IS_V4()) which takes
the code down paths for 4xx silicon. This logic is broadly applicable to
6xx silicon also. In this patch we add IS_V6() to various IS_V4() decision
locations.

Co-developed-by: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Read WRAPPER_TZ_CPU_STATUS_V6 on 6xx

On 6xx we should read wrapper cpu status from the wrapper TZ register set.

Co-developed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Co-developed-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Add 6xx interrupt support

This commit adds 6xx specific interrupt support, some register offsets and
bitmasks differ from 4xx, which we account for in this commit.

[bod: Added commit log. Moved register definition into commit]

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Add a 6xx boot logic

This patch adds a 6xx specific boot logic. The goal is to share as much
code as possible between 3xx, 4xx and 6xx silicon.

We need to do a different write to WRAPPER_INTR_MASK with an additional
write to CPU_CS_H2XSOFTINTEN_V6 and CPU_CS_X2RPMh_V6.

The other writes are the same for 6xx and non-6xx silicon albeit at
different absolute relative locations to the base of the venus address
space.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: Hook to V6 base registers when appropriate

This commit points the IO base registers 6xx offsets when probing for 6xx
hardware.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: Add an io base for AON regs

6xx silicon needs to access registers from a AON base address range.
This commit defines the necessary variable for later use.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: Add an io base for TZ wrapper regs

6xx silicon needs to access registers from a wrapper trust-zone base
address range.
This commit defines the necessary variable for later use.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: Add differentiator IS_V6(core)

This commit adds the macro helper IS_V6() which will be used to
differentiate iris2/v6 silicon from previous versions.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Define additional 6xx registers

- Add X2 RPMh registers and definitions from the downstream example.
- Add 6xx core power definitions
- Add 6xx AON definitions
- Add 6xx wrapper tz definitions
- Add 6xx wrapper interrupt definitions
- Add 6xx soft interrupt definitions
- Define wrapper LPI register offsets

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi: Define block offsets for V6 hardware

This commit defines a range of new base addresses for already defined
blocks.

- CPU_BASE_V6
- CPU_CS_BASE_V6
- CPU_IC_BASE_V6
- WRAPPER_BASE_V6

The base addresses of the blocks are slightly different for 6xx but, aside
from that are layout and bit compatible.

New 6xx specific block addresses will be added in separate commits.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi,pm,firmware: Convert to block relative addressing

An upcoming silicon change places a number of existing blocks within the
Venus at different relative offsets to the base address of IO region.

In order to handle this difference this patch changes the address offsets
of the registers to function as offsets relative to the relevant sub-block
of registers within the IO region not the base address of the IO region.

As a result of this change venus_readl() and venus_writel() are deleted.

Co-developed-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: Add io base variables for each block

New silicon means that the pre-determined offsets we have been using
in this driver no longer hold. Existing blocks of registers can exist at
different offsets relative to the IO base address.

This commit adds a routine to assign the IO base hooks a subsequent commit
will convert from absolute to relative addressing.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: add sm8250 DT compatible and resource data

Adds an sm8250 compatible binding to the venus core.

Co-developed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Co-developed-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core,pm: Add handling for resets

The Venus driver has to control two reset signals related to
gcc video_axi0 and videocc mvs0c for v6. Add it.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: Update v6 buffer descriptors

Currently hfi_platform_v6.c adds a bunch of capability parameters.
Reviewing downstream we can see a number of these need to be updated.

techpack/video/msm/vidc/msm_vidc_platform.c :: kona_capabilities[]

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: venc: Add support for CLL and Mastering display controls

Create CLL and Mastering display colour volume v4l2 controls for
encoder, add handling of HDR10 PQ SEI packet payloads for v4.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: docs: Document CLL and Mastering display colorimetry controls

Document Content Light Level and Mastering Display v4l2 colorimetry
controls.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l: Add HDR10 static metadata controls

Introduce Content light level and Mastering display colour
volume Colorimetry compound controls with relevant payload
structures and validation.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: docs: Document colorimetry class

Add a document for ext control colorimetry class.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l: Add new Colorimetry Class

Add Colorimetry control class for colorimetry controls

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: vdec: Add support for conceal control

Adds support for decoder conceal color control.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ctrl: Add decoder conceal color control

Add decoder v4l2 control to set conceal color.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi_cmds: Support plane-actual-info property from v1

The property is supported from v1 and upwards. So move it to
set_property_1x.

Fixes: 01e869e78756 ("media: venus: venc: fix handlig of S_SELECTION and G_SELECTION")
Cc: stable@vger.kernel.org # v5.12
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: venc_ctrls: Change default header mode

It is observed that on Venus v1 the default header-mode is producing
a bitstream which is not playble. Change the default header-mode to
joined with 1st frame.

Fixes: 002c22bd360e ("media: venus: venc: set inband mode property to FW.")
Cc: stable@vger.kernel.org # v5.12
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: pm_helpers: Set opp clock name for v1

The rate of the core clock is set through devm_pm_opp_set_rate and
to avoid errors from it we have to set the name of the clock via
dev_pm_opp_set_clkname.

Fixes: 9a538b83612c ("media: venus: core: Add support for opp tables/perf voting")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi_parser: Check for instance after hfi platform get

The inst function argument is != NULL only for Venus v1 and
we did not migrate v1 to a hfi_platform abstraction yet. So
check for instance != NULL only after hfi_platform_get returns
no error.

Fixes: e29929266be1 ("media: venus: Get codecs and capabilities from hfi platform")
Cc: stable@vger.kernel.org # v5.12
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: hfi_parser: Don't initialize parser on v1

The Venus v1 behaves differently comparing with the other Venus
version in respect to capability parsing and when they are send
to the driver. So we don't need to initialize hfi parser for
multiple invocations like what we do for > v1 Venus versions.

Fixes: 10865c98986b ("media: venus: parser: Prepare parser for multiple invocations")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: venc: Add support for Long Term Reference (LTR) controls

Add support for below LTR controls in encoder:
- V4L2_CID_MPEG_VIDEO_LTR_COUNT
- V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX
- V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ctrl: add controls for long term reference.

Long Term Reference (LTR) frames are the frames that are encoded
sometime in the past and stored in the DPB buffer list to be used
as reference to encode future frames.
This change adds controls to enable this feature.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: core: Drop second v4l2 device unregister

Wrong solution of rebase conflict leads to calling twice
v4l2_device_unregister in .venus_remove. Delete the second one.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

doc: update rcu_dereference.rst reference

Changeset b00aedf978aa ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
renamed: Documentation/RCU/rcu_dereference.txt
to: Documentation/RCU/rcu_dereference.rst.

Update its cross-reference accordingly.

Fixes: b00aedf978aa ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

dt-bindings:iio:dac: update microchip,mcp4725.yaml reference

Changeset 6ced946a4bba ("dt-bindings:iio:dac:microchip,mcp4725 yaml conversion")
renamed: Documentation/devicetree/bindings/iio/dac/mcp4725.txt
to: Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml.

Update its cross-reference accordingly.

Fixes: 6ced946a4bba ("dt-bindings:iio:dac:microchip,mcp4725 yaml conversion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update ti,dac7612.yaml reference

Changeset 8b74e06b0f4d ("dt-bindings:iio:dac:ti,dac7612 yaml conversion")
renamed: Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
to: Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml.

Update its cross-reference accordingly.

Fixes: 8b74e06b0f4d ("dt-bindings:iio:dac:ti,dac7612 yaml conversion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update snps,dw-axi-dmac.yaml reference

Changeset 8c70fb7e0a0a ("dt-bindings: dma: Add YAML schemas for dw-axi-dmac")
renamed: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
to: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml.

Update its cross-reference accordingly.

Fixes: 8c70fb7e0a0a ("dt-bindings: dma: Add YAML schemas for dw-axi-dmac")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update st,vl53l0x.yaml reference

Changeset b4be8bd1c6a2 ("dt-bindings:iio:proximity:st,vl53l0x yaml conversion")
renamed: Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
to: Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml.

Update its cross-reference accordingly.

Fixes: b4be8bd1c6a2 ("dt-bindings:iio:proximity:st,vl53l0x yaml conversion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update st,lsm6dsx.yaml reference

Changeset 7a2cf8e91390 ("dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion")
renamed: Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
to: Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml.

Update its cross-reference accordingly.

Fixes: 7a2cf8e91390 ("dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update renesas,rcar-gyroadc.yaml reference

Changeset 8c41245872e2 ("dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.")
renamed: Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
to: Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml.

Update its cross-reference accordingly.

Fixes: 8c41245872e2 ("dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update pni,rm3100.yaml reference

Changeset f383069be33e ("dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.")
renamed: Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
to: Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml.

Update its cross-reference accordingly.

Fixes: f383069be33e ("dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update atmel,sama5d2-adc.yaml reference

Changeset 58ff1b519753 ("dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion")
renamed: Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
to: Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml.

Update its cross-reference accordingly.

Fixes: 58ff1b519753 ("dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update mtk-sd.yaml reference

Changeset c626695ecd8b ("dt-bindings: mmc: Convert mtk-sd to json-schema")
renamed: Documentation/devicetree/bindings/mmc/mtk-sd.txt
to: Documentation/devicetree/bindings/mmc/mtk-sd.yaml.

Update its cross-reference accordingly.

Fixes: c626695ecd8b ("dt-bindings: mmc: Convert mtk-sd to json-schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update invensense,mpu3050.yaml reference

Changeset 749787477ae4 ("dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.")
renamed: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
to: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml.

Update its cross-reference accordingly.

Fixes: 749787477ae4 ("dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update voltage-divider.yaml reference

Changeset 6f633bc91ac1 ("dt-bindings:iio:afe:voltage-divider: txt to yaml conversion")
renamed: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
to: Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml.

Update its cross-reference accordingly.

Fixes: 6f633bc91ac1 ("dt-bindings:iio:afe:voltage-divider: txt to yaml conversion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS: update current-sense-shunt.yaml reference

Changeset ce66e52b6c16 ("dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion.")
renamed: Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
to: Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml.

Update its cross-reference accordingly.

Fixes: ce66e52b6c16 ("dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>