Marco Elver [Fri, 25 Jun 2021 06:58:15 +0000 (23:58 -0700)]
kasan: test: make use of kunit_skip()
Make use of the recently added kunit_skip() to skip tests, as it permits
TAP parsers to recognize if a test was deliberately skipped.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Fri, 25 Jun 2021 06:58:14 +0000 (23:58 -0700)]
kunit: test: Add example tests which are always skipped
Add two new tests to the example test suite, both of which are always
skipped. This is used as an example for how to write tests which are
skipped, and to demonstrate the difference between kunit_skip() and
kunit_mark_skipped().
Note that these tests are enabled by default, so a default run of KUnit
will have two skipped tests.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Fri, 25 Jun 2021 06:58:13 +0000 (23:58 -0700)]
kunit: tool: Support skipped tests in kunit_tool
Add support for the SKIP directive to kunit_tool's TAP parser.
Skipped tests now show up as such in the printed summary. The number of
skipped tests is counted, and if all tests in a suite are skipped, the
suite is also marked as skipped. Otherwise, skipped tests do affect the
suite result.
Example output:
[00:22:34] ======== [SKIPPED] example_skip ========
[00:22:34] [SKIPPED] example_skip_test # SKIP this test should be skipped
[00:22:34] [SKIPPED] example_mark_skipped_test # SKIP this test should be skipped
[00:22:34] ============================================================
[00:22:34] Testing complete. 2 tests run. 0 failed. 0 crashed. 2 skipped.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Fri, 25 Jun 2021 06:58:12 +0000 (23:58 -0700)]
kunit: Support skipped tests
The kunit_mark_skipped() macro marks the current test as "skipped", with
the provided reason. The kunit_skip() macro will mark the test as
skipped, and abort the test.
The TAP specification supports this "SKIP directive" as a comment after
the "ok" / "not ok" for a test. See the "Directives" section of the TAP
spec for details:
https://testanything.org/tap-specification.html#directives
The 'success' field for KUnit tests is replaced with a kunit_status
enum, which can be SUCCESS, FAILURE, or SKIPPED, combined with a
'status_comment' containing information on why a test was skipped.
A new 'kunit_status' test suite is added to test this.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 24 Jun 2021 08:48:23 +0000 (01:48 -0700)]
thunderbolt: test: Reinstate a few casts of bitfields
Partially revert "thunderbolt: test: Remove some casts which are no
longer required". It turns out that typeof() doesn't support bitfields,
so these still need to be cast to the appropriate enum.
The only mention of typeof() and bitfields I can find is in the proposal
to standardise them:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2619.htm
This was caught by the kernel test robot:
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/FDKBHAV7QNLNFU5NBI2RKV56DWDSOLGM/
Fixes:
8f0877c26e4b ("thunderbolt: test: Remove some casts which are no longer required")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Wed, 26 May 2021 08:22:17 +0000 (01:22 -0700)]
kunit: tool: internal refactor of parser input handling
Note: this does not change the parser behavior at all (except for making
one error message more useful). This is just an internal refactor.
The TAP output parser currently operates over a List[str].
This works, but we only ever need to be able to "peek" at the current
line and the ability to "pop" it off.
Also, using a List means we need to wait for all the output before we
can start parsing. While this is not an issue for most tests which are
really lightweight, we do have some longer (~5 minutes) tests.
This patch introduces an LineStream wrapper class that
* Exposes a peek()/pop() interface instead of manipulating an array
* this allows us to more easily add debugging code [1]
* Can consume an input from a generator
* we can now parse results as tests are running (the parser code
currently doesn't print until the end, so no impact yet).
* Tracks the current line number to print better error messages
* Would allow us to add additional features more easily, e.g. storing
N previous lines so we can print out invalid lines in context, etc.
[1] The parsing logic is currently quite fragile.
E.g. it'll often say the kernel "CRASHED" if there's something slightly
wrong with the output format. When debugging a test that had some memory
corruption issues, it resulted in very misleading errors from the parser.
Now we could easily add this to trace all the lines consumed and why
+import inspect
...
def pop(self) -> str:
n = self._next
+ print(f'popping {n[0]}: {n[1].ljust(40, " ")}| caller={inspect.stack()[1].function}')
Example output:
popping 77: TAP version 14 | caller=parse_tap_header
popping 78: 1..1 | caller=parse_test_plan
popping 79: # Subtest: kunit_executor_test | caller=parse_subtest_header
popping 80: 1..2 | caller=parse_subtest_plan
popping 81: ok 1 - parse_filter_test | caller=parse_ok_not_ok_test_case
popping 82: ok 2 - filter_subsuite_test | caller=parse_ok_not_ok_test_case
popping 83: ok 1 - kunit_executor_test | caller=parse_ok_not_ok_test_suite
If we introduce an invalid line, we can see the parser go down the wrong path:
popping 77: TAP version 14 | caller=parse_tap_header
popping 78: 1..1 | caller=parse_test_plan
popping 79: # Subtest: kunit_executor_test | caller=parse_subtest_header
popping 80: 1..2 | caller=parse_subtest_plan
popping 81: 1..2 # this is invalid! | caller=parse_ok_not_ok_test_case
popping 82: ok 1 - parse_filter_test | caller=parse_ok_not_ok_test_case
popping 83: ok 2 - filter_subsuite_test | caller=parse_ok_not_ok_test_case
popping 84: ok 1 - kunit_executor_test | caller=parse_ok_not_ok_test_case
[ERROR] ran out of lines before end token
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Mon, 3 May 2021 20:58:35 +0000 (13:58 -0700)]
lib/test: convert lib/test_list_sort.c to use KUnit
Functionally, this just means that the test output will be slightly
changed and it'll now depend on CONFIG_KUNIT=y/m.
It'll still run at boot time and can still be built as a loadable
module.
There was a pre-existing patch to convert this test that I found later,
here [1]. Compared to [1], this patch doesn't rename files and uses
KUnit features more heavily (i.e. does more than converting pr_err()
calls to KUNIT_FAIL()).
What this conversion gives us:
* a shorter test thanks to KUnit's macros
* a way to run this a bit more easily via kunit.py (and
CONFIG_KUNIT_ALL_TESTS=y) [2]
* a structured way of reporting pass/fail
* uses kunit-managed allocations to avoid the risk of memory leaks
* more descriptive error messages:
* i.e. it prints out which fields are invalid, what the expected
values are, etc.
What this conversion does not do:
* change the name of the file (and thus the name of the module)
* change the name of the config option
Leaving these as-is for now to minimize the impact to people wanting to
run this test. IMO, that concern trumps following KUnit's style guide
for both names, at least for now.
[1] https://lore.kernel.org/linux-kselftest/
20201015014616.309000-1-vitor@massaru.org/
[2] Can be run via
$ ./tools/testing/kunit/kunit.py run --kunitconfig /dev/stdin <<EOF
CONFIG_KUNIT=y
CONFIG_TEST_LIST_SORT=y
EOF
[16:55:56] Configuring KUnit Kernel ...
[16:55:56] Building KUnit Kernel ...
[16:56:29] Starting KUnit Kernel ...
[16:56:32] ============================================================
[16:56:32] ======== [PASSED] list_sort ========
[16:56:32] [PASSED] list_sort_test
[16:56:32] ============================================================
[16:56:32] Testing complete. 1 tests run. 0 failed. 0 crashed.
[16:56:32] Elapsed time: 35.668s total, 0.001s configuring, 32.725s building, 0.000s running
Note: the build time is as after a `make mrproper`.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Tested-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Mon, 3 May 2021 20:58:34 +0000 (13:58 -0700)]
kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
Add in:
* kunit_kmalloc_array() and wire up kunit_kmalloc() to be a special
case of it.
* kunit_kcalloc() for symmetry with kunit_kzalloc()
This should using KUnit more natural by making it more similar to the
existing *alloc() APIs.
And while we shouldn't necessarily be writing unit tests where overflow
should be a concern, it can't hurt to be safe.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Sat, 22 May 2021 04:42:41 +0000 (21:42 -0700)]
kunit: Remove the unused all_tests.config
This isn't used anywhere. While it's possible that people were manually
referencing it, the new default config (in default.config in the same
path) provides equivalent functionality.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Sat, 22 May 2021 04:42:40 +0000 (21:42 -0700)]
kunit: Move default config from arch/um -> tools/testing/kunit
The default .kunitconfig file is currently kept in
arch/um/configs/kunit_defconfig, but -- with the impending QEMU patch
-- will no-longer be exclusively used for UML-based kernels.
Move it alongside the other KUnit configs in
tools/testing/kunit/configs, and give it a name which matches the
existing all_tests.config and broken_on_uml.config files.
Also update the Getting Started documentation to point to the new file.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Sat, 22 May 2021 04:42:39 +0000 (21:42 -0700)]
kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
Make the default .kunitconfig (specified in
arch/um/configs/kunit_defconfig) specify CONFIG_KUNIT_ALL_TESTS by
default. KUNIT_ALL_TESTS runs all tests which have satisfied
dependencies in the current .config (which would be the architecture
defconfig).
Currently, the default .kunitconfig enables only the example tests and
KUnit's own tests. While this does provide a good example of what a
.kunitconfig for running a few individual tests should look like, it
does mean that kunit_tool runs a pretty paltry collection of tests by
default.
The example tests' config entry (CONFIG_KUNIT_EXAMPLE_TEST=y) continues
to be included -- despite now being redundant -- to provide an example
of how tests are enabled when KUNIT_ALL_TESTS is disabled.
A default run of ./tools/testing/kunit/kunit.py run now runs 70 tests
instead of 14.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 20:03:50 +0000 (13:03 -0700)]
kunit: Add gnu_printf specifiers
Some KUnit functions use variable arguments to implement a printf-like
format string. Use the __printf() attribute to let the compiler warn if
invalid format strings are passed in.
If the kernel is build with W=1, it complained about the lack of these
specifiers, e.g.:
../lib/kunit/test.c:72:2: warning: function ‘kunit_log_append’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:32:04 +0000 (12:32 -0700)]
lib/cmdline_kunit: Remove a cast which are no-longer required
With some of the stricter type checking in KUnit's EXPECT macros
removed, a cast in cmdline_kunit is no longer required.
Remove the unnecessary cast, using NULL instead of (int *) to make it
clearer.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:32:02 +0000 (12:32 -0700)]
kernel/sysctl-test: Remove some casts which are no-longer required
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in sysctl-test are no longer required.
Remove the unnecessary casts, making the conditions clearer.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:32:01 +0000 (12:32 -0700)]
thunderbolt: test: Remove some casts which are no longer required
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in the thunderbolt KUnit tests are no longer
required.
Remove the unnecessary casts, making the conditions clearer.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:32:00 +0000 (12:32 -0700)]
mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
With KUnit's EXPECT macros no longer typechecking arguments as strictly,
get rid of a number of now unnecessary casts.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:31:59 +0000 (12:31 -0700)]
iio: Remove a cast in iio-test-format which is no longer required
KUnit's EXPECT macros no longer typecheck as stringently, so casting the
result of strcmp() is now unnecessary.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:31:58 +0000 (12:31 -0700)]
device property: Remove some casts in property-entry-test
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in property-entry-test are no longer required.
Remove the unnecessary casts, making the conditions clearer.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:31:57 +0000 (12:31 -0700)]
Documentation: kunit: Clean up some string casts in examples
As the type checking is no longer excessively strict, get rid of the
unsightly (char*) casts -- and comment discussing them -- from the KUnit
usage page.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:31:56 +0000 (12:31 -0700)]
kunit: Assign strings to 'const char*' in STREQ assertions
Currently, the KUNIT_EXPECT_STREQ() and related macros assign both
string arguments to variables of their own type (via typeof()). This
seems to be to prevent the macro argument from being evaluated multiple
times.
However, this doesn't work if one of these is a fixed-length character
array, rather than a character pointer, as (for example) char[16] will
always allocate a new string.
By always using 'const char*' (the type strcmp expects), we're always
just taking a pointer to the string, which works even with character
arrays.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Thu, 13 May 2021 19:31:55 +0000 (12:31 -0700)]
kunit: Do not typecheck binary assertions
The use of typecheck() in KUNIT_EXPECT_EQ() and friends is causing more
problems than I think it's worth. Things like enums need to have their
values explicitly cast, and literals all need to be very precisely
typed, else a large warning will be printed.
While typechecking does have its uses, the additional overhead of having
lots of needless casts -- combined with the awkward error messages which
don't mention which types are involved -- makes tests less readable and
more difficult to write.
By removing the typecheck() call, the two arguments still need to be of
compatible types, but don't need to be of exactly the same time, which
seems a less confusing and more useful compromise.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Mauro Carvalho Chehab [Wed, 16 Jun 2021 06:27:17 +0000 (08:27 +0200)]
docs: dev-tools: kunit: don't use a table for docs name
We'll be replacing :doc:`foo` references to
Documentation/foo.rst. Yet, here it happens inside a table.
Doing a search-and-replace would break it.
Yet, as there's no good reason to use a table there,
let's just convert it into a list.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Brendan Higgins [Wed, 26 May 2021 21:24:06 +0000 (14:24 -0700)]
kunit: tool: add support for QEMU
Add basic support to run QEMU via kunit_tool. Add support for i386,
x86_64, arm, arm64, and a bunch more.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Brendan Higgins [Wed, 26 May 2021 21:24:07 +0000 (14:24 -0700)]
Documentation: kunit: document support for QEMU in kunit_tool
Document QEMU support, what it does, and how to use it in kunit_tool.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Wed, 26 May 2021 21:24:04 +0000 (14:24 -0700)]
kunit: Add 'kunit_shutdown' option
Add a new kernel command-line option, 'kunit_shutdown', which allows the
user to specify that the kernel poweroff, halt, or reboot after
completing all KUnit tests; this is very handy for running KUnit tests
on UML or a VM so that the UML/VM process exits cleanly immediately
after running all tests without needing a special initramfs.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-By: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Fri, 11 Jun 2021 03:57:25 +0000 (20:57 -0700)]
kunit: Fix result propagation for parameterised tests
When one parameter of a parameterised test failed, its failure would be
propagated to the overall test, but not to the suite result (unless it
was the last parameter).
This is because test_case->success was being reset to the test->success
result after each parameter was used, so a failing test's result would
be overwritten by a non-failing result. The overall test result was
handled in a third variable, test_result, but this was discarded after
the status line was printed.
Instead, just propagate the result after each parameter run.
Signed-off-by: David Gow <davidgow@google.com>
Fixes:
fadb08e7c750 ("kunit: Support for Parameterized Testing")
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow [Sat, 17 Apr 2021 03:45:53 +0000 (20:45 -0700)]
Documentation: kunit: Update kunit_tool page
The kunit_tool documentation page was pretty minimal, and a bit
outdated. Update it and flesh it out a bit.
In particular,
- Mention that .kunitconfig is now in the build directory
- Describe the use of --kunitconfig to specify a different config
framgent
- Mention the split functionality (i.e., commands other than 'run')
- Describe --raw_output and kunit.py parse
- Mention the globbing support
- Provide a quick overview of other options, including --build_dir and
--alltests
Note that this does overlap a little with the new running_tips page. I
don't think it's a problem having both: this page is supposed to be a
bit more of a reference, rather than a list of useful tips, so the fact
that they both describe the same features isn't a problem.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Wed, 14 Apr 2021 22:22:56 +0000 (15:22 -0700)]
Documentation: kunit: add tips for running KUnit
This is long overdue.
There are several things that aren't nailed down (in-tree
.kunitconfig's), or partially broken (GCOV on UML), but having them
documented, warts and all, is better than having nothing.
This covers a bunch of the more recent features
* kunit_filter_glob
* kunit.py run --kunitconfig
* slightly more detail on building tests as modules
* CONFIG_KUNIT_DEBUGFS
By my count, the only headline features now not mentioned are the KASAN
integration and KernelCI json output support (kunit.py run --json).
And then it also discusses how to get code coverage reports under UML
and non-UML since this is a question people have repeatedly asked.
Non-UML coverage collection is no different from normal, but we should
probably explicitly call this out.
As for UML, I was able to get it working again with two small hacks.*
E.g. with CONFIG_KUNIT=y && CONFIG_KUNIT_ALL_TESTS=y
Overall coverage rate:
lines......: 15.1% (18294 of 120776 lines)
functions..: 16.8% (1860 of 11050 functions)
Note: this doesn't document --alltests since this is not stable yet.
Hopefully being run more frequently as part of KernelCI will help...
*Using gcc/gcov-6 and not using uml_abort() in os_dump_core().
I've documented these hacks in "Notes" but left TODOs for
brendanhiggins@google.com who tracked down the runtime issue in GCC.
To be clear: these are not issues specific to KUnit, but rather to UML.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Linus Torvalds [Sun, 16 May 2021 22:27:44 +0000 (15:27 -0700)]
Linux 5.13-rc2
Linus Torvalds [Sun, 16 May 2021 17:13:14 +0000 (10:13 -0700)]
Merge tag 'driver-core-5.13-rc2' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for driver core changes that happened in
5.13-rc1.
The clk driver fix resolves a many-reported issue with booting some
devices, and the USB typec fix resolves the reported problem of USB
systems on some embedded boards.
Both of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
clk: Skip clk provider registration when np is NULL
usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
Linus Torvalds [Sun, 16 May 2021 17:06:19 +0000 (10:06 -0700)]
Merge tag 'staging-5.13-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes and one Staging driver fix for
5.13-rc2.
Nothing major, just some resolutions for reported problems:
- gcc-11 bogus warning fix for rtl8723bs
- iio driver tiny fixes
All of these have been in linux-next for many days with no reported
issues"
* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: tsl2583: Fix division by a zero lux_val
iio: core: return ENODEV if ioctl is unknown
iio: core: fix ioctl handlers removal
iio: gyro: mpu3050: Fix reported temperature value
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: light: gp2ap002: Fix rumtime PM imbalance on error
staging: rtl8723bs: avoid bogus gcc warning
Linus Torvalds [Sun, 16 May 2021 16:55:05 +0000 (09:55 -0700)]
Merge tag 'usb-5.13-rc2' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.13-rc2. They consist of a number
of resolutions for reported issues:
- typec fixes for found problems
- xhci fixes and quirk additions
- dwc3 driver fixes
- minor fixes found by Coverity
- cdc-wdm fixes for reported problems
All of these have been in linux-next for a few days with no reported
issues"
* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: hub: fix race condition about TRSMRCY of resume
usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
xhci: Add reset resume quirk for AMD xhci controller.
usb: xhci: Increase timeout for HC halt
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
usb: musb: Fix an error message
usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: fotg210-hcd: Fix an error message
docs: usb: function: Modify path name
usb: dwc3: omap: improve extcon initialization
usb: typec: ucsi: Put fwnode in any case during ->probe()
usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
usb: dwc2: Remove obsolete MODULE_ constants from platform.c
usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
usb: dwc3: imx8mp: detect dwc3 core node via compatible string
usb: dwc3: gadget: Return success always for kick transfer in ep queue
...
Linus Torvalds [Sun, 16 May 2021 16:42:13 +0000 (09:42 -0700)]
Merge tag 'timers-urgent-2021-05-16' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for timers:
- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback.
Drivers can have that callback set but the feature bit cleared. If
such a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V
VDSO clocksource should be active.
The code used a constant in an enum with #ifdef, which evaluates to
always false and disabled the clocksource for VDSO"
* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
alarmtimer: Check RTC features instead of ops
Linus Torvalds [Sun, 16 May 2021 16:39:04 +0000 (09:39 -0700)]
Merge tag 'for-linus-5.13b-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two patches for error path fixes
- a small series for fixing a regression with swiotlb with Xen on Arm
* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: check if the swiotlb has already been initialized
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
xen/unpopulated-alloc: fix error return code in fill_list()
xen/gntdev: fix gntdev_mmap() error exit path
Linus Torvalds [Sun, 16 May 2021 16:31:06 +0000 (09:31 -0700)]
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
Linus Torvalds [Sat, 15 May 2021 23:39:45 +0000 (16:39 -0700)]
Merge tag 'powerpc-5.13-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a regression in the conversion of the 64-bit BookE interrupt
entry to C.
- Fix KVM hosts running with the hash MMU since the recent KVM gfn
changes.
- Fix a deadlock in our paravirt spinlocks when hcall tracing is
enabled.
- Several fixes for oopses in our runtime code patching for security
mitigations.
- A couple of minor fixes for the recent conversion of 32-bit interrupt
entry/exit to C.
- Fix __get_user() causing spurious crashes in sigreturn due to a bad
inline asm constraint, spotted with GCC 11.
- A fix for the way we track IRQ masking state vs NMI interrupts when
using the new scv system call entry path.
- A couple more minor fixes.
Thanks to Cédric Le Goater, Christian Zigotzky, Christophe Leroy,
Naveen N. Rao, Nicholas Piggin Paul Menzel, and Sean Christopherson.
* tag 'powerpc-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64e/interrupt: Fix nvgprs being clobbered
powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
powerpc/64s: Fix stf mitigation patching w/strict RWX & hash
powerpc/64s: Fix entry flush patching w/strict RWX & hash
powerpc/64s: Fix crashes when toggling entry flush barrier
powerpc/64s: Fix crashes when toggling stf barrier
KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMU
powerpc/legacy_serial: Fix UBSAN: array-index-out-of-bounds
powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_user
powerpc/uaccess: Fix __get_user() with CONFIG_CC_HAS_ASM_GOTO_OUTPUT
powerpc/pseries: warn if recursing into the hcall tracing code
powerpc/pseries: use notrace hcall variant for H_CEDE idle
powerpc/pseries: Don't trace hcall tracing wrapper
powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks
powerpc/syscall: Calling kuap_save_and_lock() is wrong
powerpc/interrupts: Fix kuep_unlock() call
Linus Torvalds [Sat, 15 May 2021 17:24:48 +0000 (10:24 -0700)]
Merge tag 'sched-urgent-2021-05-15' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix an idle CPU selection bug, and an AMD Ryzen maximum frequency
enumeration bug"
* tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations
sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()
Linus Torvalds [Sat, 15 May 2021 17:18:23 +0000 (10:18 -0700)]
Merge tag 'objtool-urgent-2021-05-15' of git://git./linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix a couple of endianness bugs that crept in"
* tag 'objtool-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: Fix elf_add_alternative() endianness
objtool: Fix elf_create_undef_symbol() endianness
Linus Torvalds [Sat, 15 May 2021 17:13:42 +0000 (10:13 -0700)]
Merge tag 'irq-urgent-2021-05-15' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix build warning on SH"
* tag 'irq-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sh: Remove unused variable
Linus Torvalds [Sat, 15 May 2021 17:00:35 +0000 (10:00 -0700)]
Merge tag 'core-urgent-2021-05-15' of git://git./linux/kernel/git/tip/tip
Pull x86 stack randomization fix from Ingo Molnar:
"Fix an assembly constraint that affected LLVM up to version 12"
* tag 'core-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stack: Replace "o" output with "r" input constraint
Linus Torvalds [Sat, 15 May 2021 16:42:27 +0000 (09:42 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: resource, squashfs, hfsplus,
modprobe, and mm (hugetlb, slub, userfaultfd, ksm, pagealloc, kasan,
pagemap, and ioremap)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/ioremap: fix iomap_max_page_shift
docs: admin-guide: update description for kernel.modprobe sysctl
hfsplus: prevent corruption in shrinking truncate
mm/filemap: fix readahead return types
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
mm: fix struct page layout on 32-bit systems
ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()"
userfaultfd: release page in error path to avoid BUG_ON
squashfs: fix divide error in calculate_skip()
kernel/resource: fix return code check in __request_free_mem_region
mm, slub: move slub_debug static key enabling outside slab_mutex
mm/hugetlb: fix cow where page writtable in child
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Linus Torvalds [Sat, 15 May 2021 16:01:45 +0000 (09:01 -0700)]
Merge tag 'arc-5.13-rc2' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- PAE fixes
- syscall num check off-by-one bug
- misc fixes
* tag 'arc-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: mm: Use max_high_pfn as a HIGHMEM zone border
ARC: mm: PAE: use 40-bit physical page mask
ARC: entry: fix off-by-one error in syscall number validation
ARC: kgdb: add 'fallthrough' to prevent a warning
arc: Fix typos/spellos
Linus Torvalds [Sat, 15 May 2021 15:52:30 +0000 (08:52 -0700)]
Merge tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for shared tag set exit (Bart)
- Correct ioctl range for zoned ioctls (Damien)
- Removed dead/unused function (Lin)
- Fix perf regression for shared tags (Ming)
- Fix out-of-bounds issue with kyber and preemption (Omar)
- BFQ merge fix (Paolo)
- Two error handling fixes for nbd (Sun)
- Fix weight update in blk-iocost (Tejun)
- NVMe pull request (Christoph):
- correct the check for using the inline bio in nvmet (Chaitanya
Kulkarni)
- demote unsupported command warnings (Chaitanya Kulkarni)
- fix corruption due to double initializing ANA state (me, Hou Pu)
- reset ns->file when open fails (Daniel Wagner)
- fix a NULL deref when SEND is completed with error in nvmet-rdma
(Michal Kalderon)
- Fix kernel-doc warning (Bart)
* tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
block/partitions/efi.c: Fix the efi_partition() kernel-doc header
blk-mq: Swap two calls in blk_mq_exit_queue()
blk-mq: plug request for shared sbitmap
nvmet: use new ana_log_size instead the old one
nvmet: seset ns->file when open fails
nbd: share nbd_put and return by goto put_nbd
nbd: Fix NULL pointer in flush_workqueue
blkdev.h: remove unused codes blk_account_rq
block, bfq: avoid circular stable merges
blk-iocost: fix weight updates of inner active iocgs
nvmet: demote fabrics cmd parse err msg to debug
nvmet: use helper to remove the duplicate code
nvmet: demote discovery cmd parse err msg to debug
nvmet-rdma: Fix NULL deref when SEND is completed with error
nvmet: fix inline bio check for passthru
nvmet: fix inline bio check for bdev-ns
nvme-multipath: fix double initialization of ANA state
kyber: fix out of bounds access when preempted
block: uapi: fix comment about block device ioctl
Linus Torvalds [Sat, 15 May 2021 15:43:44 +0000 (08:43 -0700)]
Merge tag 'io_uring-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Just a few minor fixes/changes:
- Fix issue with double free race for linked timeout completions
- Fix reference issue with timeouts
- Remove last few places that make SQPOLL special, since it's just an
io thread now.
- Bump maximum allowed registered buffers, as we don't allocate as
much anymore"
* tag 'io_uring-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
io_uring: increase max number of reg buffers
io_uring: further remove sqpoll limits on opcodes
io_uring: fix ltout double free on completion race
io_uring: fix link timeout refs
Linus Torvalds [Sat, 15 May 2021 15:37:21 +0000 (08:37 -0700)]
Merge tag 'erofs-for-5.13-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"This mainly fixes 1 lcluster-sized pclusters for the big pcluster
feature, which can be forcely generated by mkfs as a specific on-disk
case for per-(sub)file compression strategies but missed to handle in
runtime properly.
Also, documentation updates are included to fix the broken
illustration due to the ReST conversion by accident and complete the
big pcluster introduction.
Summary:
- update documentation to fix the broken illustration due to ReST
conversion by accident at that time and complete the big pcluster
introduction
- fix 1 lcluster-sized pclusters for the big pcluster feature"
* tag 'erofs-for-5.13-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix 1 lcluster-sized pcluster for big pcluster
erofs: update documentation about data compression
erofs: fix broken illustration in documentation
Linus Torvalds [Sat, 15 May 2021 15:32:51 +0000 (08:32 -0700)]
Merge tag 'libnvdimm-fixes-5.13-rc2' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix for a bootup crash condition introduced in this merge
window and some other minor fixups:
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups"
* tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: NFIT: Fix support for variable 'SPA' structure size
MAINTAINERS: Move nvdimm mailing list
tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' static
libnvdimm: Remove duplicate struct declaration
Linus Torvalds [Sat, 15 May 2021 15:28:08 +0000 (08:28 -0700)]
Merge tag 'dax-fixes-5.13-rc2' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A fix for a hang condition due to missed wakeups in the filesystem-dax
core when exercised by virtiofs.
This bug has been there from the beginning, but the condition has
not triggered on other filesystems since they hold a lock over
invalidation events"
* tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Wake up all waiters after invalidating dax entry
dax: Add a wakeup mode parameter to put_unlocked_entry()
dax: Add an enum for specifying dax wakup mode
Linus Torvalds [Sat, 15 May 2021 15:18:29 +0000 (08:18 -0700)]
Merge tag 'drm-fixes-2021-05-15' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Looks like I wasn't the only one not fully switched on this week. The
msm pull has a missing tag so I missed it, and i915 team were a bit
late. In my defence I did have a day with the roof of my home office
removed, so was sitting at my kids desk.
msm:
- dsi regression fix
- dma-buf pinning fix
- displayport fixes
- llc fix
i915:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check"
* tag 'drm-fixes-2021-05-15' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Use correct downstream caps for check Src-Ctl mode for PCON
drm/i915/overlay: Fix active retire callback alignment
drm/i915: Fix crash in auto_retire
drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp
drm/i915: Read C0DRB3/C1DRB3 as 16 bits again
drm/i915: Avoid div-by-zero on gen2
drm/i915/dp: Use slow and wide link training for everything
drm/msm/dp: initialize audio_comp when audio starts
drm/msm/dp: check sink_count before update is_connected status
drm/msm: fix minor version to indicate MSM_PARAM_SUSPENDS support
drm/msm/dsi: fix msm_dsi_phy_get_clk_provider return code
drm/msm/dsi: dsi_phy_28nm_8960: fix uninitialized variable access
drm/msm: fix LLC not being enabled for mmu500 targets
drm/msm: Do not unpin/evict exported dma-buf's
Tetsuo Handa [Sat, 15 May 2021 03:00:37 +0000 (03:00 +0000)]
tty: vt: always invoke vc->vc_sw->con_resize callback
syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.
----------
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/kd.h>
#include <linux/vt.h>
int main(int argc, char *argv[])
{
const int fd = open("/dev/char/4:1", O_RDWR);
struct vt_sizes vt = { 0x4100, 2 };
ioctl(fd, KDSETMODE, KD_GRAPHICS);
ioctl(fd, VT_RESIZE, &vt);
ioctl(fd, KDSETMODE, KD_TEXT);
return 0;
}
----------
Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode !=
KD_GRAPHICS check from resize_screen() to fbcon_resize().
Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3
Reported-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christophe Leroy [Sat, 15 May 2021 00:27:39 +0000 (17:27 -0700)]
mm/ioremap: fix iomap_max_page_shift
iomap_max_page_shift is expected to contain a page shift, so it can't be a
'bool', has to be an 'unsigned int'
And fix the default values: P4D_SHIFT is when huge iomap is allowed.
However, on some architectures (eg: powerpc book3s/64), P4D_SHIFT is not a
constant so it can't be used to initialise a static variable. So,
initialise iomap_max_page_shift with a maximum shift supported by the
architecture, it is gated by P4D_SHIFT in vmap_try_huge_p4d() anyway.
Link: https://lkml.kernel.org/r/ad2d366015794a9f21320dcbdd0a8eb98979e9df.1620898113.git.christophe.leroy@csgroup.eu
Fixes:
bbc180a5adb0 ("mm: HUGE_VMAP arch support cleanup")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus Villemoes [Sat, 15 May 2021 00:27:36 +0000 (17:27 -0700)]
docs: admin-guide: update description for kernel.modprobe sysctl
When I added CONFIG_MODPROBE_PATH, I neglected to update Documentation/.
It's still true that this defaults to /sbin/modprobe, but now via a level
of indirection. So document that the kernel might have been built with
something other than /sbin/modprobe as the initial value.
Link: https://lkml.kernel.org/r/20210420125324.1246826-1-linux@rasmusvillemoes.dk
Fixes:
17652f4240f7a ("modules: add CONFIG_MODPROBE_PATH")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jouni Roivas [Sat, 15 May 2021 00:27:33 +0000 (17:27 -0700)]
hfsplus: prevent corruption in shrinking truncate
I believe there are some issues introduced by commit
31651c607151
("hfsplus: avoid deadlock on file truncation")
HFS+ has extent records which always contains 8 extents. In case the
first extent record in catalog file gets full, new ones are allocated from
extents overflow file.
In case shrinking truncate happens to middle of an extent record which
locates in extents overflow file, the logic in hfsplus_file_truncate() was
changed so that call to hfs_brec_remove() is not guarded any more.
Right action would be just freeing the extents that exceed the new size
inside extent record by calling hfsplus_free_extents(), and then check if
the whole extent record should be removed. However since the guard
(blk_cnt > start) is now after the call to hfs_brec_remove(), this has
unfortunate effect that the last matching extent record is removed
unconditionally.
To reproduce this issue, create a file which has at least 10 extents, and
then perform shrinking truncate into middle of the last extent record, so
that the number of remaining extents is not under or divisible by 8. This
causes the last extent record (8 extents) to be removed totally instead of
truncating into middle of it. Thus this causes corruption, and lost data.
Fix for this is simply checking if the new truncated end is below the
start of this extent record, making it safe to remove the full extent
record. However call to hfs_brec_remove() can't be moved to it's previous
place since we're dropping ->tree_lock and it can cause a race condition
and the cached info being invalidated possibly corrupting the node data.
Another issue is related to this one. When entering into the block
(blk_cnt > start) we are not holding the ->tree_lock. We break out from
the loop not holding the lock, but hfs_find_exit() does unlock it. Not
sure if it's possible for someone else to take the lock under our feet,
but it can cause hard to debug errors and premature unlocking. Even if
there's no real risk of it, the locking should still always be kept in
balance. Thus taking the lock now just before the check.
Link: https://lkml.kernel.org/r/20210429165139.3082828-1-jouni.roivas@tuxera.com
Fixes:
31651c607151f ("hfsplus: avoid deadlock on file truncation")
Signed-off-by: Jouni Roivas <jouni.roivas@tuxera.com>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Sat, 15 May 2021 00:27:30 +0000 (17:27 -0700)]
mm/filemap: fix readahead return types
A readahead request will not allocate more memory than can be represented
by a size_t, even on systems that have HIGHMEM available. Change the
length functions from returning an loff_t to a size_t.
Link: https://lkml.kernel.org/r/20210510201201.1558972-1-willy@infradead.org
Fixes:
32c0a6bcaa1f57 ("btrfs: add and use readahead_batch_length")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Collingbourne [Sat, 15 May 2021 00:27:27 +0000 (17:27 -0700)]
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
These tests deliberately access these arrays out of bounds, which will
cause the dynamic local bounds checks inserted by
CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this
problem, access the arrays via volatile pointers, which will prevent the
compiler from being able to determine the array bounds.
These accesses use volatile pointers to char (char *volatile) rather than
the more conventional pointers to volatile char (volatile char *) because
we want to prevent the compiler from making inferences about the pointer
itself (i.e. its array bounds), not the data that it refers to.
Link: https://lkml.kernel.org/r/20210507025915.1464056-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I90b1713fbfa1bf68ff895aef099ea77b98a7c3b9
Signed-off-by: Peter Collingbourne <pcc@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Sat, 15 May 2021 00:27:24 +0000 (17:27 -0700)]
mm: fix struct page layout on 32-bit systems
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Link: https://lkml.kernel.org/r/20210510153211.1504886-1-willy@infradead.org
Fixes:
c25fff7171be ("mm: add dma_addr_t to struct page")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Matteo Croce <mcroce@linux.microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 15 May 2021 00:27:22 +0000 (17:27 -0700)]
ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()"
This reverts commit
3e96b6a2e9ad929a3230a22f4d64a74671a0720b. General
Protection Fault in rmap_walk_ksm() under memory pressure:
remove_rmap_item_from_tree() needs to take page lock, of course.
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2105092253500.1127@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Rasmussen [Sat, 15 May 2021 00:27:19 +0000 (17:27 -0700)]
userfaultfd: release page in error path to avoid BUG_ON
Consider the following sequence of events:
1. Userspace issues a UFFD ioctl, which ends up calling into
shmem_mfill_atomic_pte(). We successfully account the blocks, we
shmem_alloc_page(), but then the copy_from_user() fails. We return
-ENOENT. We don't release the page we allocated.
2. Our caller detects this error code, tries the copy_from_user() after
dropping the mmap_lock, and retries, calling back into
shmem_mfill_atomic_pte().
3. Meanwhile, let's say another process filled up the tmpfs being used.
4. So shmem_mfill_atomic_pte() fails to account blocks this time, and
immediately returns - without releasing the page.
This triggers a BUG_ON in our caller, which asserts that the page
should always be consumed, unless -ENOENT is returned.
To fix this, detect if we have such a "dangling" page when accounting
fails, and if so, release it before returning.
Link: https://lkml.kernel.org/r/20210428230858.348400-1-axelrasmussen@google.com
Fixes:
cb658a453b93 ("userfaultfd: shmem: avoid leaking blocks and used blocks in UFFDIO_COPY")
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Sat, 15 May 2021 00:27:16 +0000 (17:27 -0700)]
squashfs: fix divide error in calculate_skip()
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Link: https://lkml.kernel.org/r/20210507152618.9447-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+e8f781243ce16ac2f962@syzkaller.appspotmail.com>
Reported-by: <syzbot+7b98870d4fec9447b951@syzkaller.appspotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Sat, 15 May 2021 00:27:13 +0000 (17:27 -0700)]
kernel/resource: fix return code check in __request_free_mem_region
Splitting an earlier version of a patch that allowed calling
__request_region() while holding the resource lock into a series of
patches required changing the return code for the newly introduced
__request_region_locked().
Unfortunately this change was not carried through to a subsequent commit
56fd94919b8b ("kernel/resource: fix locking in request_free_mem_region")
in the series. This resulted in a use-after-free due to freeing the
struct resource without properly releasing it. Fix this by correcting the
return code check so that the struct is not freed if the request to add it
was successful.
Link: https://lkml.kernel.org/r/20210512073528.22334-1-apopple@nvidia.com
Fixes:
56fd94919b8b ("kernel/resource: fix locking in request_free_mem_region")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Muchun Song <smuchun@gmail.com>
Cc: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sat, 15 May 2021 00:27:10 +0000 (17:27 -0700)]
mm, slub: move slub_debug static key enabling outside slab_mutex
Paul E. McKenney reported [1] that commit
1f0723a4c0df ("mm, slub: enable
slub_debug static key when creating cache with explicit debug flags")
results in the lockdep complaint:
======================================================
WARNING: possible circular locking dependency detected
5.12.0+ #15 Not tainted
------------------------------------------------------
rcu_torture_sta/109 is trying to acquire lock:
ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20
but task is already holding lock:
ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (slab_mutex){+.+.}-{3:3}:
lock_acquire+0xb9/0x3a0
__mutex_lock+0x8d/0x920
slub_cpu_dead+0x15/0xf0
cpuhp_invoke_callback+0x17a/0x7c0
cpuhp_invoke_callback_range+0x3b/0x80
_cpu_down+0xdf/0x2a0
cpu_down+0x2c/0x50
device_offline+0x82/0xb0
remove_cpu+0x1a/0x30
torture_offline+0x80/0x140
torture_onoff+0x147/0x260
kthread+0x10a/0x140
ret_from_fork+0x22/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
check_prev_add+0x8f/0xbf0
__lock_acquire+0x13f0/0x1d80
lock_acquire+0xb9/0x3a0
cpus_read_lock+0x21/0xa0
static_key_enable+0x9/0x20
__kmem_cache_create+0x38d/0x430
kmem_cache_create_usercopy+0x146/0x250
kmem_cache_create+0xd/0x10
rcu_torture_stats+0x79/0x280
kthread+0x10a/0x140
ret_from_fork+0x22/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(slab_mutex);
lock(cpu_hotplug_lock);
lock(slab_mutex);
lock(cpu_hotplug_lock);
*** DEADLOCK ***
1 lock held by rcu_torture_sta/109:
#0:
ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250
stack backtrace:
CPU: 3 PID: 109 Comm: rcu_torture_sta Not tainted 5.12.0+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
dump_stack+0x6d/0x89
check_noncircular+0xfe/0x110
? lock_is_held_type+0x98/0x110
check_prev_add+0x8f/0xbf0
__lock_acquire+0x13f0/0x1d80
lock_acquire+0xb9/0x3a0
? static_key_enable+0x9/0x20
? mark_held_locks+0x49/0x70
cpus_read_lock+0x21/0xa0
? static_key_enable+0x9/0x20
static_key_enable+0x9/0x20
__kmem_cache_create+0x38d/0x430
kmem_cache_create_usercopy+0x146/0x250
? rcu_torture_stats_print+0xd0/0xd0
kmem_cache_create+0xd/0x10
rcu_torture_stats+0x79/0x280
? rcu_torture_stats_print+0xd0/0xd0
kthread+0x10a/0x140
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
This is because there's one order of locking from the hotplug callbacks:
lock(cpu_hotplug_lock); // from hotplug machinery itself
lock(slab_mutex); // in e.g. slab_mem_going_offline_callback()
And commit
1f0723a4c0df made the reverse sequence possible:
lock(slab_mutex); // in kmem_cache_create_usercopy()
lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable()
The simplest fix is to move static_key_enable() to a place before slab_mutex is
taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not
ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it
at least self-contained and obvious.
[1] https://lore.kernel.org/lkml/
20210502171827.GA3670492@paulmck-ThinkPad-P17-Gen-1/
Link: https://lkml.kernel.org/r/20210504120019.26791-1-vbabka@suse.cz
Fixes:
1f0723a4c0df ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Sat, 15 May 2021 00:27:07 +0000 (17:27 -0700)]
mm/hugetlb: fix cow where page writtable in child
When rework early cow of pinned hugetlb pages, we moved huge_ptep_get()
upper but overlooked a side effect that the huge_ptep_get() will fetch the
pte after wr-protection. After moving it upwards, we need explicit
wr-protect of child pte or we will keep the write bit set in the child
process, which could cause data corrution where the child can write to the
original page directly.
This issue can also be exposed by "memfd_test hugetlbfs" kselftest.
Link: https://lkml.kernel.org/r/20210503234356.9097-3-peterx@redhat.com
Fixes:
4eae4efa2c299 ("hugetlb: do early cow when page pinned on src mm")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Sat, 15 May 2021 00:27:04 +0000 (17:27 -0700)]
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.
Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).
Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages. Patch 2 addresses that.
After this series applied, "memfd_test hugetlbfs" should start to pass.
This patch (of 2):
F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.
$ ./memfd_test hugetlbfs
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
mmap() didn't fail as expected
Aborted (core dumped)
I think it's probably because no one is really running the hugetlbfs test.
Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we
do in shmem_mmap(). Generalize a helper for that.
Link: https://lkml.kernel.org/r/20210503234356.9097-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210503234356.9097-2-peterx@redhat.com
Fixes:
ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Fri, 14 May 2021 20:13:22 +0000 (06:13 +1000)]
Merge tag 'drm-msm-fixes-2021-05-09' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
- dsi regression fix
- dma-buf pinning fix
- displayport fixes
- llc fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuqLZDAEJwUFKb6m+h3kyxgjDEKa3DPA1fHA69vxbXH=g@mail.gmail.com
Linus Torvalds [Fri, 14 May 2021 20:44:51 +0000 (13:44 -0700)]
Merge tag 'trace-v5.13-rc1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix trace_check_vprintf() for %.*s
The sanity check of all strings being read from the ring buffer to
make sure they are in safe memory space did not account for the %.*s
notation having another parameter to process (the length).
Add that to the check"
* tag 'trace-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Handle %.*s in trace_check_vprintf()
Dave Airlie [Fri, 14 May 2021 20:12:45 +0000 (06:12 +1000)]
Merge tag 'drm-intel-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc2:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6oxu9ao.fsf@intel.com
Linus Torvalds [Fri, 14 May 2021 17:52:47 +0000 (10:52 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fixes and cpucaps.h automatic generation:
- Generate cpucaps.h at build time rather than carrying lots of
#defines. Merged at -rc1 to avoid some conflicts during the merge
window.
- Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0
out of reset and the IRG instruction would not function as expected
if only the architected pseudorandom number generator is
implemented.
- Fix potential race condition in __sync_icache_dcache() where the
PG_dcache_clean page flag is set before the actual cache
maintenance.
- Fix header include in BTI kselftests"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
kselftest/arm64: Add missing stddef.h include to BTI tests
arm64: Generate cpucaps.h
Linus Torvalds [Fri, 14 May 2021 17:49:20 +0000 (10:49 -0700)]
Merge tag 'f2fs-5.13-rc1-fix' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"This fixes some critical bugs such as memory leak in compression
flows, kernel panic when handling errors, and swapon failure due to
newly added condition check"
* tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: return EINVAL for hole cases in swap file
f2fs: avoid swapon failure by giving a warning first
f2fs: compress: fix to assign cc.cluster_idx correctly
f2fs: compress: fix race condition of overwrite vs truncate
f2fs: compress: fix to free compress page correctly
f2fs: support iflag change given the mask
f2fs: avoid null pointer access when handling IPU error
Linus Torvalds [Fri, 14 May 2021 17:38:16 +0000 (10:38 -0700)]
Merge tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much here, mostly amdgpu fixes, with a couple of radeon, and a
cosmetic vc4.
Two MAINTAINERS file updates also.
amdgpu:
- Fixes for flexible array conversions
- Fix sysfs attribute init
- Harvesting fixes
- VCN CG/PG fixes for Picasso
radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
vc4:
- drop unused function"
* tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: update vcn1.0 Non-DPG suspend sequence
drm/amdgpu: set vcn mgcg flag for picasso
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
drm/amdgpu: update the method for harvest IP for specific SKU
drm/amdgpu: add judgement when add ip blocks (v2)
drm/amd/display: Initialize attribute for hdcp_srm sysfs file
drm/amd/pm: Fix out-of-bounds bug
drm/radeon/si_dpm: Fix SMU power state load
drm/radeon/ni_dpm: Fix booting bug
MAINTAINERS: Update address for Emma Anholt
MAINTAINERS: Update my e-mail
drm/vc4: remove unused function
drm/ttm: Do not add non-system domain BO into swap list
Catalin Marinas [Fri, 14 May 2021 09:50:01 +0000 (10:50 +0100)]
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
To ensure that instructions are observable in a new mapping, the arm64
set_pte_at() implementation cleans the D-cache and invalidates the
I-cache to the PoU. As an optimisation, this is only done on executable
mappings and the PG_dcache_clean page flag is set to avoid future cache
maintenance on the same page.
When two different processes map the same page (e.g. private executable
file or shared mapping) there's a potential race on checking and setting
PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the
fault paths the page is locked (PG_locked), mprotect() does not take the
page lock. The result is that one process may see the PG_dcache_clean
flag set but the I/D cache maintenance not yet performed.
Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit()
and set_bit(). In the rare event of a race, the cache maintenance is
done twice.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210514095001.13236-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bart Van Assche [Thu, 13 May 2021 17:17:08 +0000 (10:17 -0700)]
block/partitions/efi.c: Fix the efi_partition() kernel-doc header
Fix the following kernel-doc warning:
block/partitions/efi.c:685: warning: wrong kernel-doc identifier on line:
* efi_partition(struct parsed_partitions *state)
Cc: Alexander Viro <viro@math.psu.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210513171708.8391-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 13 May 2021 17:15:29 +0000 (10:15 -0700)]
blk-mq: Swap two calls in blk_mq_exit_queue()
If a tag set is shared across request queues (e.g. SCSI LUNs) then the
block layer core keeps track of the number of active request queues in
tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that
atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make
sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is
cleared by blk_mq_del_queue_tag_set().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Fixes:
0d2602ca30e4 ("blk-mq: improve support for shared tags maps")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210513171529.7977-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 14 May 2021 02:20:52 +0000 (10:20 +0800)]
blk-mq: plug request for shared sbitmap
In case of shared sbitmap, request won't be held in plug list any more
sine commit
32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per
tagset"), this way makes request merge from flush plug list & batching
submission not possible, so cause performance regression.
Yanhui reports performance regression when running sequential IO
test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk
is emulated with image stored on xfs/megaraid_sas.
Fix the issue by recovering original behavior to allow to hold request
in plug list.
Cc: Yanhui Ma <yama@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: kashyap.desai@broadcom.com
Fixes:
32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210514022052.1047665-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stefano Stabellini [Wed, 12 May 2021 20:18:23 +0000 (13:18 -0700)]
xen/swiotlb: check if the swiotlb has already been initialized
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with
-ENOMEM if the swiotlb has already been initialized.
Add an explicit check io_tlb_default_mem != NULL at the beginning of
xen_swiotlb_init. If the swiotlb is already initialized print a warning
and return -EEXIST.
On x86, the error propagates.
On ARM, we don't actually need a special swiotlb buffer (yet), any
buffer would do. So ignore the error and continue.
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210512201823.1963-3-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Christoph Hellwig [Wed, 12 May 2021 20:18:22 +0000 (13:18 -0700)]
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
Although SWIOTLB_NO_FORCE is meant to allow later calls to swiotlb_init,
today dma_direct_map_page returns error if SWIOTLB_NO_FORCE.
For now, without a larger overhaul of SWIOTLB_NO_FORCE, the best we can
do is to avoid setting SWIOTLB_NO_FORCE in mem_init when we know that it
is going to be required later (e.g. Xen requires it).
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: catalin.marinas@arm.com
CC: will@kernel.org
CC: linux-arm-kernel@lists.infradead.org
Fixes:
2726bf3ff252 ("swiotlb: Make SWIOTLB_NO_FORCE perform no allocation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210512201823.1963-2-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Stefano Stabellini [Wed, 12 May 2021 20:18:21 +0000 (13:18 -0700)]
xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
Move xen_swiotlb_detect to a static inline function to make it available
to !CONFIG_XEN builds.
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Vitaly Kuznetsov [Thu, 13 May 2021 07:32:46 +0000 (09:32 +0200)]
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029)
the commit
e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO
differences inline") broke vDSO on x86. The problem appears to be that
VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and
'#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not
a define).
Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead.
Fixes:
e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline")
Reported-by: Mohammed Gamal <mgamal@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
Pavel Begunkov [Fri, 14 May 2021 11:06:44 +0000 (12:06 +0100)]
io_uring: increase max number of reg buffers
Since recent changes instead of storing a large array of struct
io_mapped_ubuf, we store pointers to them, that is 4 times slimmer and
we should not to so worry about restricting max number of registererd
buffer slots, increase the limit 4 times.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d3dee1da37f46da416aa96a16bf9e5094e10584d.1620990371.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 14 May 2021 11:05:46 +0000 (12:05 +0100)]
io_uring: further remove sqpoll limits on opcodes
There are three types of requests that left disabled for sqpoll, namely
epoll ctx, statx, and resources update. Since SQPOLL task is now closely
mimics a userspace thread, remove the restrictions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/909b52d70c45636d8d7897582474ea5aab5eed34.1620990306.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 14 May 2021 11:02:50 +0000 (12:02 +0100)]
io_uring: fix ltout double free on completion race
Always remove linked timeout on io_link_timeout_fn() from the master
request link list, otherwise we may get use-after-free when first
io_link_timeout_fn() puts linked timeout in the fail path, and then
will be found and put on master's free.
Cc: stable@vger.kernel.org # 5.10+
Fixes:
90cd7e424969d ("io_uring: track link timeout's master explicitly")
Reported-and-tested-by: syzbot+5a864149dd970b546223@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/69c46bf6ce37fec4fdcd98f0882e18eb07ce693a.1620990121.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nicholas Piggin [Fri, 14 May 2021 04:40:08 +0000 (14:40 +1000)]
powerpc/64e/interrupt: Fix nvgprs being clobbered
Some interrupt handlers have an "extra" that saves 1 or 2
registers (r14, r15) in the paca save area and makes them available to
use by the handler.
The change to always save nvgprs in exception handlers lead to some
interrupt handlers saving those scratch r14 / r15 registers into the
interrupt frame's GPR saves, which get restored on interrupt exit.
Fix this by always reloading those scratch registers from paca before
the EXCEPTION_COMMON that saves nvgprs.
Fixes:
4228b2c3d20e ("powerpc/64e/interrupt: always save nvgprs on interrupt")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
Nicholas Piggin [Mon, 3 May 2021 11:17:08 +0000 (21:17 +1000)]
powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
scv support introduced the notion of code that implicitly soft-masks
irqs due to the instruction addresses. This is required because scv
enters the kernel with MSR[EE]=1.
If a NMI (including soft-NMI) interrupt hits when we are implicitly
soft-masked then its regs->softe does not reflect this because it is
derived from the explicit soft mask state (paca->irq_soft_mask). This
makes arch_irq_disabled_regs(regs) return false.
This can trigger a warning in the soft-NMI watchdog code (shown below).
Fix it by having NMI interrupts set regs->softe to disabled in case of
interrupting an implicit soft-masked region.
------------[ cut here ]------------
WARNING: CPU: 41 PID: 1103 at arch/powerpc/kernel/watchdog.c:259 soft_nmi_interrupt+0x3e4/0x5f0
CPU: 41 PID: 1103 Comm: (spawn) Not tainted
NIP:
c000000000039534 LR:
c000000000039234 CTR:
c000000000009a00
REGS:
c000007fffbcf940 TRAP: 0700 Not tainted
MSR:
9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR:
22042482 XER:
200400ad
CFAR:
c000000000039260 IRQMASK: 3
GPR00:
c000000000039204 c000007fffbcfbe0 c000000001d6c300 0000000000000003
GPR04:
00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020
GPR08:
0000007ffd4e0000 0000000000000000 c000007ffffceb00 7265677368657265
GPR12:
9000000000009033 c000007ffffceb00 00000f7075bf4480 000000000000002a
GPR16:
00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000
GPR20:
00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040
GPR24:
0000000000000000 0000000000000029 c000000001dae058 0000000000000029
GPR28:
0000000000000000 0000000000000800 0000000000000009 c000007fffbcfd60
NIP [
c000000000039534] soft_nmi_interrupt+0x3e4/0x5f0
LR [
c000000000039234] soft_nmi_interrupt+0xe4/0x5f0
Call Trace:
[
c000007fffbcfbe0] [
c000000000039204] soft_nmi_interrupt+0xb4/0x5f0 (unreliable)
[
c000007fffbcfcf0] [
c00000000000c0e8] soft_nmi_common+0x138/0x1c4
--- interrupt: 900 at end_real_trampolines+0x0/0x1000
NIP:
c000000000003000 LR:
00007ca426adb03c CTR:
900000000280f033
REGS:
c000007fffbcfd60 TRAP: 0900
MSR:
9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
44042482 XER:
200400ad
CFAR:
00007ca426946020 IRQMASK: 0
GPR00:
00000000000000ad 00007ffffa45d050 00007ca426b07f00 0000000000000035
GPR04:
00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020
GPR08:
0000000000000000 0000000000100000 0000000010000000 00007ffffa45d110
GPR12:
0000000000000001 00007ca426d4e680 00000f7075bf4480 000000000000002a
GPR16:
00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000
GPR20:
00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040
GPR24:
0000000000000000 00000f7057473f68 0000000000000003 000000000000041b
GPR28:
00007ffffa45d4c4 0000000000000035 0000000000000000 00000f7057473f68
NIP [
c000000000003000] end_real_trampolines+0x0/0x1000
LR [
00007ca426adb03c] 0x7ca426adb03c
--- interrupt: 900
Instruction dump:
60000000 60000000 60420000 38600001 482b3ae5 60000000 e93f0138 a36d0008
7daa6b78 71290001 7f7907b4 4082fd34 <
0fe00000>
4bfffd2c 60420000 ea6100a8
---[ end trace
dc75f67d819779da ]---
Fixes:
118178e62e2e ("powerpc: move NMI entry/exit code into wrapper")
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210503111708.758261-1-npiggin@gmail.com
Michael Ellerman [Thu, 13 May 2021 14:08:00 +0000 (00:08 +1000)]
powerpc/64s: Fix stf mitigation patching w/strict RWX & hash
The stf entry barrier fallback is unsafe to execute in a semi-patched
state, which can happen when enabling/disabling the mitigation with
strict kernel RWX enabled and using the hash MMU.
See the previous commit for more details.
Fix it by changing the order in which we patch the instructions.
Note the stf barrier fallback is only used on Power6 or earlier.
Fixes:
bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513140800.1391706-2-mpe@ellerman.id.au
Michael Ellerman [Thu, 13 May 2021 14:07:59 +0000 (00:07 +1000)]
powerpc/64s: Fix entry flush patching w/strict RWX & hash
The entry flush mitigation can be enabled/disabled at runtime. When this
happens it results in the kernel patching its own instructions to
enable/disable the mitigation sequence.
With strict kernel RWX enabled instruction patching happens via a
secondary mapping of the kernel text, so that we don't have to make the
primary mapping writable. With the hash MMU this leads to a hash fault,
which causes us to execute the exception entry which contains the entry
flush mitigation.
This means we end up executing the entry flush in a semi-patched state,
ie. after we have patched the first instruction but before we patch the
second or third instruction of the sequence.
On machines with updated firmware the entry flush is a series of special
nops, and it's safe to to execute in a semi-patched state.
However when using the fallback flush the sequence is mflr/branch/mtlr,
and so it's not safe to execute if we have patched out the mflr but not
the other two instructions. Doing so leads to us corrputing LR, leading
to an oops, for example:
# echo 0 > /sys/kernel/debug/powerpc/entry_flush
kernel tried to execute exec-protected page (
c000000002971000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc000000002971000
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 0 PID: 2215 Comm: bash Not tainted 5.13.0-rc1-00010-gda3bb206c9ce #1
NIP:
c000000002971000 LR:
c000000002971000 CTR:
c000000000120c40
REGS:
c000000013243840 TRAP: 0400 Not tainted (5.13.0-rc1-00010-gda3bb206c9ce)
MSR:
8000000010009033 <SF,EE,ME,IR,DR,RI,LE> CR:
48428482 XER:
00000000
...
NIP 0xc000000002971000
LR 0xc000000002971000
Call Trace:
do_patch_instruction+0xc4/0x340 (unreliable)
do_entry_flush_fixups+0x100/0x3b0
entry_flush_set+0x50/0xe0
simple_attr_write+0x160/0x1a0
full_proxy_write+0x8c/0x110
vfs_write+0xf0/0x340
ksys_write+0x84/0x140
system_call_exception+0x164/0x2d0
system_call_common+0xec/0x278
The simplest fix is to change the order in which we patch the
instructions, so that the sequence is always safe to execute. For the
non-fallback flushes it doesn't matter what order we patch in.
Fixes:
bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513140800.1391706-1-mpe@ellerman.id.au
Michael Ellerman [Thu, 6 May 2021 04:49:59 +0000 (14:49 +1000)]
powerpc/64s: Fix crashes when toggling entry flush barrier
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
sleeper[15639]: segfault (11) at
c000000000004c20 nip
c000000000004c20 lr
c000000000004c20
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes:
f79643787e0a ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-2-mpe@ellerman.id.au
Michael Ellerman [Thu, 6 May 2021 04:49:58 +0000 (14:49 +1000)]
powerpc/64s: Fix crashes when toggling stf barrier
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
User access of kernel address (
c00000003fff5af0) - exploit attempt? (uid: 0)
segfault (11) at
c00000003fff5af0 nip
7fff8ad12198 lr
7fff8ad121f8 code 1
code:
40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018
code:
2c030006 41810154 3860ffb6 e9210098 <
e94d8ff0>
7d295279 39400000 40820a3c
Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes:
a048a07d7f45 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-1-mpe@ellerman.id.au
Dave Airlie [Thu, 13 May 2021 23:20:04 +0000 (09:20 +1000)]
Merge tag 'amd-drm-fixes-5.13-2021-05-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-05-13:
amdgpu:
- Fixes for flexible array conversions
- Fix sysfs attribute init
- Harvesting fixes
- VCN CG/PG fixes for Picasso
radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com
Dave Airlie [Thu, 13 May 2021 23:19:32 +0000 (09:19 +1000)]
Merge tag 'drm-misc-fixes-2021-05-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Remove an unused function and a MAINTAINERS update.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513133617.xq77wwrehpuh7yn2@hendrix
Linus Torvalds [Thu, 13 May 2021 19:28:10 +0000 (12:28 -0700)]
Merge tag 'pm-5.13-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These close a coverage gap in the intel_pstate driver and fix runtime
PM child count imbalance related to interactions with system-wide
suspend.
Specifics:
- Make intel_pstate work as expected on systems where the platform
firmware enables HWP even though the HWP EPP support is not
advertised (Rafael Wysocki).
- Fix possible runtime PM child count imbalance that may occur if
other runtime PM functions are called after invoking
pm_runtime_force_suspend() and before pm_runtime_force_resume()
is called (Tony Lindgren)"
* tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix unpaired parent child_count for force_resume
cpufreq: intel_pstate: Use HWP if enabled by platform firmware
Linus Torvalds [Thu, 13 May 2021 19:22:01 +0000 (12:22 -0700)]
Merge tag 'acpi-5.13-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert an unnecessary revert of an ACPI power management commit,
add a missing device ID to one of the lists and fix a possible memory
leak in an error path.
Specifics:
- Revert a revert of a recent ACPI power management change that does
not need to be reverted after all (Rafael Wysocki).
- Add missing fan device ID to the list of device IDs for which the
devices should not be put into the ACPI PM domain (Sumeet
Pawnikar).
- Fix possible memory leak in an error path in the ACPI device
enumeration code (Christophe JAILLET)"
* tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Add ACPI ID of Alder Lake Fan
ACPI: scan: Fix a memory leak in an error handling path
Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""
Rafael J. Wysocki [Thu, 13 May 2021 18:39:58 +0000 (20:39 +0200)]
Merge branch 'acpi-pm'
* acpi-pm:
ACPI: PM: Add ACPI ID of Alder Lake Fan
Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""
Rafael J. Wysocki [Thu, 13 May 2021 18:39:07 +0000 (20:39 +0200)]
Merge branch 'pm-core'
* pm-core:
PM: runtime: Fix unpaired parent child_count for force_resume
Steven Rostedt (VMware) [Thu, 13 May 2021 16:23:24 +0000 (12:23 -0400)]
tracing: Handle %.*s in trace_check_vprintf()
If a trace event uses the %*.s notation, the trace_check_vprintf() will
fail and will warn about a bad processing of strings, because it does not
take into account the length field when processing the star (*) part.
Have it handle this case as well.
Link: https://lore.kernel.org/linux-nfs/238C0E2D-C2A4-4578-ADD2-C565B3B99842@oracle.com/
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes:
9a6944fee68e2 ("tracing: Add a verifier to check string pointers for trace events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Thu, 13 May 2021 18:12:51 +0000 (11:12 -0700)]
Merge branch 'resizex' (patches from Maciej)
Merge VT_RESIZEX fixes from Maciej Rozycki:
"I got to the bottom of the issue with VT_RESIZEX recently discussed
and came up with this small patch series, fixing an additional issue
that I originally thought might be broken VGA hardware emulation with
my laptop, which however turned out to be intertwined with the
original problem and also a regression introduced somewhat later.
The fix for that because the first patch, and then to make backporting
feasible I had to put a revert of the offending change from last
September next, followed by a proper fix for the framebuffer issue
that change had tried to address.
See individual change descriptions for details.
These have been verified with true VGA hardware (a Trident TVGA8900
ISA video adapter) using various combinations of `svgatextmode' and
`setfont' command invocations to change both the VT size and the font
size, and also switching between the text console and X11, both by
starting/stopping the X server and by switching between VTs.
All this to ensure bringing the behaviour of VGA text console back to
correct operation as it used to be with Linux 2.6.18"
* emailed patches from Maciej W. Rozycki <macro@orcam.me.uk>:
vt: Fix character height handling with VT_RESIZEX
vt_ioctl: Revert VT_RESIZEX parameter handling removal
vgacon: Record video mode changes with VT_RESIZEX
Maciej W. Rozycki [Thu, 13 May 2021 09:51:50 +0000 (11:51 +0200)]
vt: Fix character height handling with VT_RESIZEX
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit
988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit
9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
References:
[1] https://syzkaller.appspot.com/bug?id=
32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=
6b8355d27b2b94fb5cedf4655e3a59162d9e48e3
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maciej W. Rozycki [Thu, 13 May 2021 09:51:45 +0000 (11:51 +0200)]
vt_ioctl: Revert VT_RESIZEX parameter handling removal
Revert the removal of code handling extra VT_RESIZEX ioctl's parameters
beyond those that VT_RESIZE supports, fixing a functional regression
causing `svgatextmode' not to resize the VT anymore.
As a consequence of the reverted change when the video adapter is
reprogrammed from the original say 80x25 text mode using a 9x16
character cell (720x400 pixel resolution) to say 80x37 text mode and the
same character cell (720x592 pixel resolution), the VT geometry does not
get updated and only upper two thirds of the screen are used for the VT,
and the lower part remains blank. The proportions change according to
text mode geometries chosen.
Revert the change verbatim then, bringing back previous VT resizing.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes:
988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maciej W. Rozycki [Thu, 13 May 2021 09:51:41 +0000 (11:51 +0200)]
vgacon: Record video mode changes with VT_RESIZEX
Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl. As it stands in that case the original
screen geometry continues being used to validate further VT resizing.
Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen. Of course the
proportions change according to text mode geometries and font sizes
chosen.
Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes:
e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Thu, 13 May 2021 17:07:17 +0000 (11:07 -0600)]
Merge tag 'nvme-5.13-2021-05-13' of git://git.infradead.org/nvme into block-5.13
Pull NVMe fixes from Christoph:
"nvme fix for Linux 5.13
- correct the check for using the inline bio in nvmet
(Chaitanya Kulkarni)
- demote unsupported command warnings (Chaitanya Kulkarni)
- fix corruption due to double initializing ANA state (me, Hou Pu)
- reset ns->file when open fails (Daniel Wagner)
- fix a NULL deref when SEND is completed with error in nvmet-rdma
(Michal Kalderon)"
* tag 'nvme-5.13-2021-05-13' of git://git.infradead.org/nvme:
nvmet: use new ana_log_size instead the old one
nvmet: seset ns->file when open fails
nvmet: demote fabrics cmd parse err msg to debug
nvmet: use helper to remove the duplicate code
nvmet: demote discovery cmd parse err msg to debug
nvmet-rdma: Fix NULL deref when SEND is completed with error
nvmet: fix inline bio check for passthru
nvmet: fix inline bio check for bdev-ns
nvme-multipath: fix double initialization of ANA state
Linus Torvalds [Thu, 13 May 2021 16:58:53 +0000 (09:58 -0700)]
Merge tag 'hwmon-for-v5.13-rc2' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix bugs/regressions in adm9240, ltc2992, pmbus/fsp-3y, and occ
drivers, plus a minor cleanup in the corsair-psu driver"
* tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adm9240) Fix writes into inX_max attributes
hwmon: (ltc2992) Put fwnode in error case during ->probe()
hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding
hwmon: (occ) Fix poll rate limiting
hwmon: (corsair-psu) Remove unneeded semicolons
Mark Brown [Thu, 13 May 2021 15:18:19 +0000 (16:18 +0100)]
arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
Anshuman suggested this.
Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210513151819.12526-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Sathishkumar S [Mon, 3 May 2021 18:27:31 +0000 (23:57 +0530)]
drm/amdgpu: update vcn1.0 Non-DPG suspend sequence
update suspend register settings in Non-DPG mode.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>