Harshit Mogalapalli [Thu, 20 Jul 2023 12:39:50 +0000 (05:39 -0700)]
drm/loongson: Fix error handling in lsdc_pixel_pll_setup()
[ Upstream commit
5976a28b344ecb6810882a01b76a320cac21d307 ]
There are two problems in lsdc_pixel_pll_setup()
1. If kzalloc() fails then call iounmap() to release the resources.
2. Both kzalloc and ioremap does not return error pointers on failure, so
using IS_ERR_OR_NULL() checks is a bit confusing and not very right,
fix this by changing those to NULL checks instead.
Fixes:
f39db26c5428 ("drm: Add kms driver for loongson display controller")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720123950.543082-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Wed, 9 Aug 2023 14:56:41 +0000 (16:56 +0200)]
drm: bridge: samsung-dsim: Fix waiting for empty cmd transfer FIFO on older Exynos
[ Upstream commit
15f389da11257b806da75a070cfa41ca0cc15aae ]
Samsung DSIM used in older Exynos SoCs (like Exynos 4210, 4x12, 3250)
doesn't report empty level of packer header FIFO. In case of those SoCs,
use the old way of waiting for empty command tranfsfer FIFO, removed
recently by commit
14806c641582 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer").
Fixes:
14806c641582 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809145641.3213210-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 4 Aug 2023 03:01:37 +0000 (20:01 -0700)]
drm: bridge: for GENERIC_PHY_MIPI_DPHY also select GENERIC_PHY
[ Upstream commit
96413b355a49fd684430a230479bd231d977894f ]
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY
might not be set. This causes Kconfig warnings and a build error.
WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY
Depends on [n]: GENERIC_PHY [=n]
Selected by [y]:
- DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
- DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
(drm/bridge/cadence/Kconfig was found by inspection.)
aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl':
drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk'
Prevent these warnings and build error by also selecting GENERIC_PHY
whenever selecting GENERIC_PHY_MIPI_DPHY.
Fixes:
fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Fixes:
44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support")
Fixes:
171b3b1e0f8b ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Aleksandr Nogikh <nogikh@google.com>
Link: lore.kernel.org/r/
20230803144227.2187749-1-nogikh@google.com
Cc: Adam Ford <aford173@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804030140.21395-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sun, 9 Jul 2023 13:48:27 +0000 (15:48 +0200)]
drm: bridge: samsung-dsim: Initialize ULPS EXIT for i.MX8M DSIM
[ Upstream commit
192948f6a923bedf461b4aa09e70a25cfb8a6041 ]
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older
revisions of this patchset, in newer revisions of the DSIM patchset it
was left out and set to 0. Fix it.
Fixes:
4d562c70c4dc ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134827.449185-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vaishnav Achath [Tue, 26 Sep 2023 11:38:12 +0000 (17:08 +0530)]
spi: omap2-mcspi: Fix hardcoded reference clock
[ Upstream commit
2d9f4877988f64f0f336983de65c365b6a7debfb ]
A hardcoded reference clock of 48 MHz is used to calculate the
clock divisor values, but the reference clock frequency can be
different across devices and can be configured which can cause
a mismatch between the reported frequency and actual SPI clock
frequency observed. Fix this by fetching the clock rate from
the clock provider and falling back to hardcoded reference only
if the clock is not supplied.
Fixes:
2cd7d393f461 ("arm64: dts: ti: k3-am654: Add McSPI DT nodes")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230926113812.30692-1-vaishnav.a@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 23 Aug 2023 03:30:03 +0000 (11:30 +0800)]
spi: omap2-mcspi: switch to use modern name
[ Upstream commit
ee0f793cc1881225dee04216f1080201603b46bb ]
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230823033003.3407403-22-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of:
2d9f4877988f ("spi: omap2-mcspi: Fix hardcoded reference clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lalith Rajendran [Fri, 27 Oct 2023 21:02:22 +0000 (16:02 -0500)]
platform/chrome: cros_ec_lpc: Separate host command and irq disable
[ Upstream commit
47ea0ddb1f5604ba3496baa19110aec6a3151f2e ]
Both cros host command and irq disable were moved to suspend
prepare stage from late suspend recently. This is causing EC
to report MKBP event timeouts during suspend stress testing.
When the MKBP event timeouts happen during suspend, subsequent
wakeup of AP by EC using MKBP doesn't happen properly. Move the
irq disabling part back to late suspend stage which is a general
suggestion from the suspend kernel documentaiton to do irq
disable as late as possible.
Fixes:
4b9abbc132b8 ("platform/chrome: cros_ec_lpc: Move host command to prepare/complete")
Signed-off-by: Lalith Rajendran <lalithkraj@chromium.org>
Link: https://lore.kernel.org/r/20231027160221.v4.1.I1725c3ed27eb7cd9836904e49e8bfa9fb0200a97@changeid
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli [Thu, 26 Oct 2023 07:53:28 +0000 (00:53 -0700)]
hte: tegra: Fix missing error code in tegra_hte_test_probe()
[ Upstream commit
b7c3ca3553d1de5e86c85636828e186d30cd0628 ]
The value of 'ret' is zero when of_hte_req_count() fails to get number
of entitties to timestamp. And returning success(zero) on this failure
path is incorrect.
Fixes:
9a75a7cd03c9 ("hte: Add Tegra HTE test driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Armin Wolf [Thu, 7 Sep 2023 05:26:36 +0000 (07:26 +0200)]
hwmon: (sch5627) Disallow write access if virtual registers are locked
[ Upstream commit
7da8a635436029957c5350da3acf51d78ed64071 ]
When the lock bit inside SCH5627_REG_CTRL is set, then the virtual
registers become read-only until the next power cycle.
Disallow write access to those registers in such a case.
Tested on a Fujitsu Esprimo P720.
Fixes:
aa9f833dfc12 ("hwmon: (sch5627) Add pwmX_auto_channels_temp support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Armin Wolf [Thu, 7 Sep 2023 05:26:35 +0000 (07:26 +0200)]
hwmon: (sch5627) Use bit macros when accessing the control register
[ Upstream commit
7f0b28e0653f36b51542d25dd54ed312c397ecfc ]
Use bit macros then accessing SCH5627_REG_CTRL, so that people
do not need to look at the datasheet to find out what each bit
does.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of:
7da8a6354360 ("hwmon: (sch5627) Disallow write access if virtual registers are locked")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Naresh Solanki [Fri, 27 Oct 2023 10:33:52 +0000 (10:33 +0000)]
hwmon: (pmbus/mp2975) Move PGOOD fix
[ Upstream commit
9da2901c47332b030ea4d2a2302bc7c0b83fc67c ]
The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975.
Fixes:
acda945afb46 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Wed, 25 Oct 2023 21:32:40 +0000 (14:32 -0700)]
Revert "hwmon: (sch56xx-common) Add automatic module loading on supported devices"
[ Upstream commit
d621a46d05107f4e510383d6a38f2160c62d28f7 ]
This reverts commit
393935baa45e5ccb9603cf7f9f020ed1bc0915f7.
As reported by Ian Nartowicz, this and the next patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes:
393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/
20231025192239.
3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Wed, 25 Oct 2023 21:28:49 +0000 (14:28 -0700)]
Revert "hwmon: (sch56xx-common) Add DMI override table"
[ Upstream commit
28da9dee3594423534f3ea1e1f61e6bb2d2fa651 ]
This reverts commit
fd2d53c367ae9983c2100ac733a834e0c79d7537.
As reported by Ian Nartowicz, this and the preceding patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes:
fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/
20231025192239.
3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Rui [Wed, 25 Oct 2023 12:23:16 +0000 (20:23 +0800)]
hwmon: (coretemp) Fix potentially truncated sysfs attribute name
[ Upstream commit
bbfff736d30e5283ad09e748caff979d75ddef7f ]
When build with W=1 and "-Werror=format-truncation", below error is
observed in coretemp driver,
drivers/hwmon/coretemp.c: In function 'create_core_data':
>> drivers/hwmon/coretemp.c:393:34: error: '%s' directive output may be truncated writing likely 5 or more bytes into a region of size between 3 and 13 [-Werror=format-truncation=]
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~
drivers/hwmon/coretemp.c:393:26: note: assuming directive output of 5 bytes
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~~~~~~~~~~
drivers/hwmon/coretemp.c:392:17: note: 'snprintf' output 7 or more bytes (assuming 22) into a destination of size 19
392 | snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
393 | "temp%d_%s", attr_no, suffixes[i]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Given that
1. '%d' could take 10 charactors,
2. '%s' could take 10 charactors ("crit_alarm"),
3. "temp", "_" and the NULL terminator take 6 charactors,
fix the problem by increasing CORETEMP_NAME_LENGTH to 28.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Fixes:
7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202310200443.iD3tUbbK-lkp@intel.com/
Link: https://lore.kernel.org/r/20231025122316.836400-1-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Bogdan [Wed, 25 Oct 2023 13:21:00 +0000 (15:21 +0200)]
hwmon: (axi-fan-control) Fix possible NULL pointer dereference
[ Upstream commit
2a5b3370a1d9750eca325292e291c8c7cb8cf2e0 ]
axi_fan_control_irq_handler(), dependent on the private
axi_fan_control_data structure, might be called before the hwmon
device is registered. That will cause an "Unable to handle kernel
NULL pointer dereference" error.
Fixes:
8412b410fa5e ("hwmon: Support ADI Fan Control IP")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231025132100.649499-1-nuno.sa@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abel Vesa [Tue, 24 Oct 2023 13:46:26 +0000 (16:46 +0300)]
regulator: qcom-rpmh: Fix smps4 regulator for pm8550ve
[ Upstream commit
bc00d9f3813a40bc2d854ae0edab14c6b43a3219 ]
The type of the smps4 regulator from pm8550ve is actually FTSMPS525
medium voltage. So fix it accordingly.
Fixes:
e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231024134626.2364426-1-abel.vesa@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Armin Wolf [Fri, 20 Oct 2023 21:10:04 +0000 (23:10 +0200)]
platform/x86: wmi: Fix opening of char device
[ Upstream commit
eba9ac7abab91c8f6d351460239108bef5e7a0b6 ]
Since commit
fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via
file private data"), the miscdevice stores a pointer to itself inside
filp->private_data, which means that private_data will not be NULL when
wmi_char_open() is called. This might cause memory corruption should
wmi_char_open() be unable to find its driver, something which can
happen when the associated WMI device is deleted in wmi_free_devices().
Fix the problem by using the miscdevice pointer to retrieve the WMI
device data associated with a char device using container_of(). This
also avoids wmi_char_open() picking a wrong WMI device bound to a
driver with the same name as the original driver.
Fixes:
44b6b7661132 ("platform/x86: wmi: create userspace interface for drivers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Armin Wolf [Fri, 20 Oct 2023 21:10:03 +0000 (23:10 +0200)]
platform/x86: wmi: Fix probe failure when failing to register WMI devices
[ Upstream commit
ed85891a276edaf7a867de0e9acd0837bc3008f2 ]
When a WMI device besides the first one somehow fails to register,
retval is returned while still containing a negative error code. This
causes the ACPI device fail to probe, leaving behind zombie WMI devices
leading to various errors later.
Handle the single error path separately and return 0 unconditionally
after trying to register all WMI devices to solve the issue. Also
continue to register WMI devices even if some fail to allocate memory.
Fixes:
6ee50aaa9a20 ("platform/x86: wmi: Instantiate all devices before adding them")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 24 Oct 2023 05:00:53 +0000 (08:00 +0300)]
clk: mediatek: fix double free in mtk_clk_register_pllfh()
[ Upstream commit
bd54ccc0f147019dac38e7841876a7415459b875 ]
The mtk_clk_register_pll_ops() currently frees the "pll" parameter.
The function has two callers, mtk_clk_register_pll() and
mtk_clk_register_pllfh(). The first one, the _pll() function relies on
the free, but for the second _pllfh() function it causes a double free
bug.
Really the frees should be done in the caller because that's where
the allocation is.
Fixes:
d7964de8a8ea ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd7fa365-28cc-4c34-ac64-6da57c98baa6@moroto.mountain
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:55 +0000 (12:29 +0530)]
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
[ Upstream commit
5635ef0bd1052420bc659a00be6fd0c60cec5cb9 ]
GPLL clock rates are fixed and shouldn't be scaled based on the
request from dependent clocks. Doing so will result in the unexpected
behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
Fixes:
3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-5-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:54 +0000 (12:29 +0530)]
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
[ Upstream commit
99a8f8764b70158a712992640a6be46a8fd79d15 ]
GPLL clock rates are fixed and shouldn't be scaled based on the request
from dependent clocks. Doing so will result in the unexpected behaviour.
So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
----
Changes in V2:
- No changes
Fixes:
d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-4-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:53 +0000 (12:29 +0530)]
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
[ Upstream commit
01a5e4c6731ab6b4b74822661d296f8893fc1230 ]
GPLL clock rates are fixed and shouldn't be scaled based on the
request from dependent clocks. Doing so will result in the unexpected
behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
----
Changes in V2:
- New patch
Fixes:
e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-3-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varadarajan Narayanan [Fri, 20 Oct 2023 06:19:34 +0000 (11:49 +0530)]
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
[ Upstream commit
5b7a4d3d2b33398330aef69e0ff5656273483587 ]
The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.
The frequency can still increase above this initial configuration
made here when the cpufreq driver picks a different OPP.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes:
c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/00e6be6cb9cee56628123a64ade118d0a752018b.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varadarajan Narayanan [Fri, 20 Oct 2023 06:19:33 +0000 (11:49 +0530)]
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
[ Upstream commit
267e29198436a8cb6770213471f72502c895096a ]
The set rate and determine rate operations are different between
Stromer and Stromer Plus PLLs. Since the programming sequence is
different, the PLLs dont get configured properly and random,
inexplicable crash/freeze is seen. Hence, use stromer plus ops
for ipq_pll_stromer_plus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Fixes:
c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/c86ecaa23dc4f39650bcf4a3bd54a617a932e4fd.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varadarajan Narayanan [Fri, 20 Oct 2023 06:19:32 +0000 (11:49 +0530)]
clk: qcom: clk-alpha-pll: introduce stromer plus ops
[ Upstream commit
84da48921a97cee3dd1391659e93ee01d122b78b ]
Stromer plus APSS PLL does not support dynamic frequency scaling.
To switch between frequencies, we have to shut down the PLL,
configure the L and ALPHA values and turn on again. So introduce the
separate set of ops for Stromer Plus PLL.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of:
267e29198436 ("clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varadarajan Narayanan [Fri, 20 Oct 2023 06:19:31 +0000 (11:49 +0530)]
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
[ Upstream commit
6a15647d0adc686226045e8046369f34d6ab03ed ]
The config IPQ_APSS_6018 should depend on QCOM_SMEM, to
avoid the following error reported by 'kernel test robot'
loongarch64-linux-ld: drivers/clk/qcom/apss-ipq6018.o: in function `apss_ipq6018_probe':
>> apss-ipq6018.c:(.text+0xd0): undefined reference to `qcom_smem_get_soc_id'
Fixes:
5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/
202310181650.g8THtfsm-lkp@intel.com/
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/f4c4d65a7cb71e807d6d472c63c7718408c8f5f0.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Fri, 1 Sep 2023 02:46:58 +0000 (10:46 +0800)]
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
[ Upstream commit
0d6e24b422a2166a9297a8286ff2e6ab9a5e8cd3 ]
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes:
e9862118272a ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230901024658.23405-1-jiasheng@iscas.ac.cn
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 12 Sep 2023 09:34:07 +0000 (17:34 +0800)]
clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data
[ Upstream commit
2befa515c1bb6cdd33c262b909d93d1973a219aa ]
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes:
3b5e748615e7 ("clk: mediatek: add clock support for MT7629 SoC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-5-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 12 Sep 2023 09:34:06 +0000 (17:34 +0800)]
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
[ Upstream commit
0884393c63cc9a1772f7121a6645ba7bd76feeb9 ]
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes:
3b5e748615e7 ("clk: mediatek: add clock support for MT7629 SoC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-4-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 12 Sep 2023 09:34:05 +0000 (17:34 +0800)]
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
[ Upstream commit
606f6366a35a3329545e38129804d65ef26ed7d2 ]
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes:
96596aa06628 ("clk: mediatek: add clk support for MT6797")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-3-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 12 Sep 2023 09:34:04 +0000 (17:34 +0800)]
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
[ Upstream commit
1f57f78fbacf630430bf954e5a84caafdfea30c0 ]
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes:
710774e04861 ("clk: mediatek: Add MT6779 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-2-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 12 Sep 2023 09:34:03 +0000 (17:34 +0800)]
clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data
[ Upstream commit
b82681042724924ae3ba0f2f2eeec217fa31e830 ]
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes:
1aca9939bf72 ("clk: mediatek: Add MT6765 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-1-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Sat, 23 Sep 2023 13:31:27 +0000 (15:31 +0200)]
clk: npcm7xx: Fix incorrect kfree
[ Upstream commit
bbc5080bef4a245106aa8e8d424ba8847ca7c0ca ]
The corresponding allocation is:
> npcm7xx_clk_data = kzalloc(struct_size(npcm7xx_clk_data, hws,
> NPCM7XX_NUM_CLOCKS), GFP_KERNEL);
... so, kfree should be applied to npcm7xx_clk_data, not
npcm7xx_clk_data->hws.
Fixes:
fcfd14369856 ("clk: npcm7xx: add clock controller")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230923133127.1815621-1-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 2 Oct 2023 07:04:36 +0000 (10:04 +0300)]
clk: ti: fix double free in of_ti_divider_clk_setup()
[ Upstream commit
7af5b9eadd64c9e02a71f97c45bcdf3b64841f6b ]
The "div" pointer is freed in _register_divider() and again in
of_ti_divider_clk_setup(). Delete the free in _register_divider()
Fixes:
fbbc18591585 ("clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/6d36eeec-6c8a-4f11-a579-aa3cd7c38749@moroto.mountain
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 5 Oct 2023 14:01:57 +0000 (17:01 +0300)]
clk: keystone: pll: fix a couple NULL vs IS_ERR() checks
[ Upstream commit
a5d14f8b551eb1551c10053653ee8e27f19672fa ]
The clk_register_divider() and clk_register_mux() functions returns
error pointers on error but this code checks for NULL. Fix that.
Fixes:
b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d9da4c97-0da9-499f-9a21-1f8e3f148dc1@moroto.mountain
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergio Paracuellos [Sun, 27 Aug 2023 02:39:32 +0000 (04:39 +0200)]
clk: ralink: mtmips: quiet unused variable warning
[ Upstream commit
619102313466eaf8a6ac188e711f5df749dac6d4 ]
When CONFIG_OF is disabled then the matching table is not referenced and
the following warning appears:
drivers/clk/ralink/clk-mtmips.c:821:34: warning: unused variable 'mtmips_of_match' [-Wunused-const-variable]
821 | static const struct of_device_id mtmips_of_match[] = {
| ^
There are two match tables in the driver: one for the clock driver and the
other for the reset driver. The only difference between them is that the
clock driver uses 'data' and does not have 'ralink,rt2880-reset' compatible.
Both just can be merged into a single one just by adding the compatible
'ralink,rt2880-reset' entry to 'mtmips_of_match[]', which will allow it to
be used for 'mtmips_clk_driver' (which doesn't use the data) as well as for
'mtmips_clk_init()' (which doesn't need get called for 'ralink,rt2880-reset').
Doing in this way ensures that 'CONFIG_OF' is not disabled anymore so the
above warning disapears.
Fixes:
6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202307242310.CdOnd2py-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230827023932.501102-1-sergio.paracuellos@gmail.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Han Xu [Tue, 10 Oct 2023 20:15:24 +0000 (15:15 -0500)]
spi: nxp-fspi: use the correct ioremap function
[ Upstream commit
c3aa5cb264a38ae9bbcce32abca4c155af0456df ]
AHB memory as MMIO should be mapped with ioremap rather than ioremap_wc,
which should have been used initially just to handle unaligned access as
a workaround.
Fixes:
d166a73503ef ("spi: fspi: dynamically alloc AHB memory")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20231010201524.2021340-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sat, 30 Sep 2023 22:14:26 +0000 (15:14 -0700)]
clk: linux/clk-provider.h: fix kernel-doc warnings and typos
[ Upstream commit
84aefafe6b294041b7fa0757414c4a29c1bdeea2 ]
Fix spelling of "Structure".
Fix multiple kernel-doc warnings:
clk-provider.h:269: warning: Function parameter or member 'recalc_rate' not described in 'clk_ops'
clk-provider.h:468: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:468: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:482: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:482: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:687: warning: Function parameter or member 'flags' not described in 'clk_divider'
clk-provider.h:1164: warning: Function parameter or member 'flags' not described in 'clk_fractional_divider'
clk-provider.h:1164: warning: Function parameter or member 'approximation' not described in 'clk_fractional_divider'
clk-provider.h:1213: warning: Function parameter or member 'flags' not described in 'clk_multiplier'
Fixes:
9fba738a53dd ("clk: add duty cycle support")
Fixes:
b2476490ef11 ("clk: introduce the common clock framework")
Fixes:
2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers")
Fixes:
f5290d8e4f0c ("clk: asm9260: use parent index to link the reference clock")
Fixes:
9d9f78ed9af0 ("clk: basic clock hardware types")
Fixes:
e2d0e90fae82 ("clk: new basic clk type for fractional divider")
Fixes:
f2e0a53271a4 ("clk: Add a basic multiplier clock")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230930221428.18463-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Fri, 29 Sep 2023 05:38:52 +0000 (08:38 +0300)]
clk: renesas: rzg2l: Fix computation formula
[ Upstream commit
a2b23159499efd36b2d63b3c4534075d12ddc97a ]
According to the hardware manual for RZ/G2L
(r01uh0914ej0130-rzg2l-rzg2lc.pdf), the computation formula for PLL rate
is as follows:
Fout = ((m + k/65536) * Fin) / (p * 2^s)
and k has values in the range [-32768, 32767]. Dividing k by 65536 with
integer arithmetic gives zero all the time, causing slight differences
b/w what has been set vs. what is displayed. Thus, get rid of this and
decompose the formula before dividing k by 65536.
Fixes:
ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-6-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Tue, 12 Sep 2023 04:51:33 +0000 (07:51 +0300)]
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
[ Upstream commit
72977f07b035e488c3f1928832a1616c6cae7278 ]
Use FIELD_GET() for PLL register fields. This is its purpose.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-14-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of:
a2b23159499e ("clk: renesas: rzg2l: Fix computation formula")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Fri, 29 Sep 2023 05:38:51 +0000 (08:38 +0300)]
clk: renesas: rzg2l: Trust value returned by hardware
[ Upstream commit
bf51d3b2d048c312764a55d91d67a85ee5535e31 ]
The onitial value of the CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b. The
hardware user's manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that
setting 0 is prohibited. Hence rzg2l_cpg_sd_clk_mux_get_parent() should
just read CPG_PL2SDHI_DSEL, trust the value, and return the proper clock
parent index based on the value read.
Fixes:
eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-5-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Fri, 29 Sep 2023 05:38:50 +0000 (08:38 +0300)]
clk: renesas: rzg2l: Lock around writes to mux register
[ Upstream commit
d2692ed490e680a41401cef879adebcfafb4298f ]
The SD MUX output (SD0) is further divided by 4 in G2{L,UL}. The
divided clock is SD0_DIV4. SD0_DIV4 is registered with
CLK_SET_RATE_PARENT which means a rate request for it is propagated to
the MUX and could reach rzg2l_cpg_sd_clk_mux_set_parent() concurrently
with the users of SD0.
Add proper locking to avoid concurrent accesses on SD MUX set rate
registers.
Fixes:
eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-4-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Fri, 29 Sep 2023 05:38:49 +0000 (08:38 +0300)]
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
[ Upstream commit
549f4ae2601f968e2474c6031fb4799468882f64 ]
The hardware user manual for RZ/G2L (r01uh0914ej0130-rzg2l-rzg2lc.pdf,
chapter 7.4.7 Procedure for Switching Clocks by the Dynamic Switching
Frequency Selectors) specifies that we need to check CPG_PL2SDHI_DSEL
for SD clock switching status.
Fixes:
eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-3-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dirk Behme [Thu, 28 Sep 2023 08:03:17 +0000 (10:03 +0200)]
clk: renesas: rcar-gen3: Extend SDnH divider table
[ Upstream commit
d5252d9697a3e7007c741e9c103073868955a304 ]
The clock dividers might be used with clock stop bit enabled or not.
Current tables only support recommended values from the datasheet. This
might result in warnings like below because no valid clock divider is
found. Resulting in a 0 divider.
There are Renesas ARM Trusted Firmware version out there which e.g.
configure 0x201 (shifted logical right by 2: 0x80) and with this match
the added { STPnHCK | 0, 1 }:
https://github.com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.3/drivers/renesas/rcar/emmc/emmc_init.c#L108
------------[ cut here ]------------
sd1h: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
WARNING: CPU: 1 PID: 1 at drivers/clk/clk-divider.c:141 divider_recalc_rate+0x48/0x70
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.52 #1
Hardware name: Custom board based on r8a7796 (DT)
pstate:
40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : divider_recalc_rate+0x48/0x70
...
------------[ cut here ]------------
Fixes:
bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
[wsa: extended the table to 5 entries, added comments, reword commit message a little]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230928080317.28224-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Chiras [Tue, 12 Sep 2023 09:19:00 +0000 (17:19 +0800)]
clk: imx: imx8qxp: Fix elcdif_pll clock
[ Upstream commit
15cee75dacb82ade710d61bfd536011933ef9bf2 ]
Move the elcdif_pll clock initialization before the lcd_clk, since the
elcdif_clk needs to be initialized ahead of lcd_clk, being its parent.
This change fixes issues with the LCD clocks during suspend/resume.
Fixes:
babfaa9556d7 ("clk: imx: scu: add more scu clocks")
Suggested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-2-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Fan [Sun, 1 Oct 2023 12:26:18 +0000 (20:26 +0800)]
clk: imx: imx8mq: correct error handling path
[ Upstream commit
577ad169966e6e75b10e004389a3f79813e84b5d ]
Avoid memory leak in error handling path. It does not make
much sense for the SoC without clk driver, to make program behavior
correct, let's fix it.
Fixes:
b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/
202309240551.e46NllPa-lkp@intel.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231001122618.194498-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 14 Sep 2023 20:31:04 +0000 (22:31 +0200)]
clk: imx: imx8: Fix an error handling path in imx8_acm_clk_probe()
[ Upstream commit
e9a164e367f039629fd5466a79b9f495646e1261 ]
If an error occurs after a successful clk_imx_acm_attach_pm_domains() call,
it must be undone.
Add an explicit error handling path, re-order the code and add the missing
clk_imx_acm_detach_pm_domains() call.
Fixes:
d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 14 Sep 2023 20:31:03 +0000 (22:31 +0200)]
clk: imx: imx8: Fix an error handling path if devm_clk_hw_register_mux_parent_data_table() fails
[ Upstream commit
9a0108acdb1b6189dcc8f9318edfc6b7e0281df4 ]
If a devm_clk_hw_register_mux_parent_data_table() call fails, it is likely
that the probe should fail with an error code.
Set 'ret' before leaving the function.
Fixes:
d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 14 Sep 2023 20:31:02 +0000 (22:31 +0200)]
clk: imx: imx8: Fix an error handling path in clk_imx_acm_attach_pm_domains()
[ Upstream commit
156624e2cf815ce98fad5a24f04370f4459ae6f4 ]
If a dev_pm_domain_attach_by_id() call fails, previously allocated
resources need to be released.
Fixes:
d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abel Vesa [Thu, 21 Sep 2023 09:23:54 +0000 (12:23 +0300)]
clk: imx: Select MXC_CLK for CLK_IMX8QXP
[ Upstream commit
317e69c49b4ceef8aebb47d771498ccb3571bdf9 ]
If the i.MX8QXP clock provider is built-in but the MXC_CLK is
built as module, build fails:
aarch64-linux-ld: drivers/clk/imx/clk-imx8-acm.o: in function `imx8_acm_clk_probe':
clk-imx8-acm.c:(.text+0x3d0): undefined reference to `imx_check_clk_hws'
Fix that by selecting MXC_CLK in case of CLK_IMX8QXP.
Fixes:
c2cccb6d0b33 ("clk: imx: add imx8qxp clk driver")
Closes: https://lore.kernel.org/all/
8b77219e-b59e-40f1-96f1-
980a0b2debcf@infradead.org/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Wed, 13 Sep 2023 08:29:16 +0000 (16:29 +0800)]
regulator: mt6358: Fail probe on unknown chip ID
[ Upstream commit
7442edec72bc657e6ce38ae01de9f10e55decfaa ]
The MT6358 and MT6366 PMICs, and likely many others from MediaTek, have
a chip ID register, making the chip semi-discoverable.
The driver currently supports two PMICs and expects to be probed on one
or the other. It does not account for incorrect mfd driver entries or
device trees. While these should not happen, if they do, it could be
catastrophic for the device. The driver should be sure the hardware is
what it expects.
Make the driver fail to probe if the chip ID presented is not a known
one.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes:
f0e3c6261af1 ("regulator: mt6366: Add support for MT6366 regulator")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230913082919.1631287-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Sun, 17 Sep 2023 08:58:37 +0000 (10:58 +0200)]
gpio: sim: initialize a managed pointer when declaring it
[ Upstream commit
9f93f18305f5777820491e6ab9b34422c160371b ]
Variables managed with __free() should typically be initialized where
they are declared so that the __free() callback is paired with its
counterpart resource allocator. Fix the second instance of using
__free() in gpio-sim to follow this pattern.
Fixes:
3faf89f27aab ("gpio: sim: simplify code with cleanup helpers")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Danila Tikhonov [Wed, 13 Sep 2023 17:56:11 +0000 (20:56 +0300)]
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
[ Upstream commit
7138c244fb293f24ce8ab782961022eff00a10c4 ]
Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.
Fixes:
2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
Tested-by: Arseniy Velikanov <adomerlee@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913175612.8685-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Wed, 9 Aug 2023 19:20:28 +0000 (21:20 +0200)]
clk: qcom: mmcc-msm8998: Fix the SMMU GDSC
[ Upstream commit
1fc62c8347397faf4e18249e88ecd4470c0a5357 ]
The SMMU GDSC doesn't have to be ALWAYS-ON and shouldn't feature the
HW_CTRL flag (it's separate from hw_ctrl_addr). In addition to that,
it should feature a cxc entry for bimc_smmu_axi_clk and be marked as
votable.
Fix all of these issues.
Fixes:
d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-5-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Wed, 9 Aug 2023 19:20:27 +0000 (21:20 +0200)]
clk: qcom: mmcc-msm8998: Don't check halt bit on some branch clks
[ Upstream commit
9906c4140897bbdbff7bb71c6ae67903cb9954ce ]
Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Fixes:
d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-4-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Devi Priya [Fri, 1 Sep 2023 07:36:40 +0000 (13:06 +0530)]
clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies
[ Upstream commit
f7b7d30158cff246667273bd2a62fc93ee0725d2 ]
If the parent clock rate is greater than unsigned long max/2 then
integer overflow happens when calculating the clock rate on 32-bit systems.
As RCG2 uses half integer dividers, the clock rate is first being
multiplied by 2 which will overflow the unsigned long max value.
Hence, replace the common pattern of doing 64-bit multiplication
and then a do_div() call with simpler mult_frac call.
Fixes:
bcd61c0f535a ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com
[bjorn: Also drop unnecessary {} around single statements]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Thu, 31 Aug 2023 09:39:14 +0000 (11:39 +0200)]
clk: qcom: gcc-msm8996: Remove RPM bus clocks
[ Upstream commit
4afda5f6bcdf673ef2556fcfa458daf3a5a648d8 ]
The GCC driver contains clocks that are owned (meaning configured and
scaled) by the RPM core.
Remove them from Linux to stop interjecting the RPM's logic.
Fixes:
b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-rpmbusclocks8996gcc-v1-1-9e99bedcdc3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varadarajan Narayanan [Thu, 31 Aug 2023 09:28:53 +0000 (14:58 +0530)]
clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks
[ Upstream commit
ccd8ab030643040600a663edde56b434b6f4fb6c ]
IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.
Fixes:
3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/1693474133-10467-1-git-send-email-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Shurong [Sat, 26 Aug 2023 10:02:54 +0000 (18:02 +0800)]
spi: tegra: Fix missing IRQ check in tegra_slink_probe()
[ Upstream commit
eb9913b511f10968a02cfa5329a896855dd152a3 ]
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Fix this by stop calling request_irq() with invalid IRQ #s.
Fixes:
dc4dc3605639 ("spi: tegra: add spi driver for SLINK controller")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/tencent_73FCC06A3D1C14EE5175253C6FB46A07B709@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Mon, 4 Sep 2023 20:04:06 +0000 (22:04 +0200)]
regmap: debugfs: Fix a erroneous check after snprintf()
[ Upstream commit
d3601857e14de6369f00ae19564f1d817d175d19 ]
This error handling looks really strange.
Check if the string has been truncated instead.
Fixes:
f0c2319f9f19 ("regmap: Expose the driver name in debugfs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/8595de2462c490561f70020a6d11f4d6b652b468.1693857825.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 26 Oct 2023 13:14:46 +0000 (13:14 +0000)]
ipvlan: properly track tx_errors
[ Upstream commit
ff672b9ffeb3f82135488ac16c5c5eb4b992999b ]
Both ipvlan_process_v4_outbound() and ipvlan_process_v6_outbound()
increment dev->stats.tx_errors in case of errors.
Unfortunately there are two issues :
1) ipvlan_get_stats64() does not propagate dev->stats.tx_errors to user.
2) Increments are not atomic. KCSAN would complain eventually.
Use DEV_STATS_INC() to not miss an update, and change ipvlan_get_stats64()
to copy the value back to user.
Fixes:
2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Link: https://lore.kernel.org/r/20231026131446.3933175-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 21 Sep 2023 08:52:16 +0000 (08:52 +0000)]
net: add DEV_STATS_READ() helper
[ Upstream commit
0b068c714ca9479d2783cc333fff5bc2d4a6d45c ]
Companion of DEV_STATS_INC() & DEV_STATS_ADD().
This is going to be used in the series.
Use it in macsec_get_stats64().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of:
ff672b9ffeb3 ("ipvlan: properly track tx_errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 26 Oct 2023 17:18:40 +0000 (17:18 +0000)]
virtio_net: use u64_stats_t infra to avoid data-races
[ Upstream commit
61217d8f6360437329af1b16b8bbd9143167718d ]
syzbot reported a data-race in virtnet_poll / virtnet_stats [1]
u64_stats_t infra has very nice accessors that must be used
to avoid potential load-store tearing.
[1]
BUG: KCSAN: data-race in virtnet_poll / virtnet_stats
read-write to 0xffff88810271b1a0 of 8 bytes by interrupt on cpu 0:
virtnet_receive drivers/net/virtio_net.c:2102 [inline]
virtnet_poll+0x6c8/0xb40 drivers/net/virtio_net.c:2148
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
invoke_softirq kernel/softirq.c:427 [inline]
__irq_exit_rcu kernel/softirq.c:632 [inline]
irq_exit_rcu+0x3b/0x90 kernel/softirq.c:644
common_interrupt+0x7f/0x90 arch/x86/kernel/irq.c:247
asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:636
__sanitizer_cov_trace_const_cmp8+0x0/0x80 kernel/kcov.c:306
jbd2_write_access_granted fs/jbd2/transaction.c:1174 [inline]
jbd2_journal_get_write_access+0x94/0x1c0 fs/jbd2/transaction.c:1239
__ext4_journal_get_write_access+0x154/0x3f0 fs/ext4/ext4_jbd2.c:241
ext4_reserve_inode_write+0x14e/0x200 fs/ext4/inode.c:5745
__ext4_mark_inode_dirty+0x8e/0x440 fs/ext4/inode.c:5919
ext4_evict_inode+0xaf0/0xdc0 fs/ext4/inode.c:299
evict+0x1aa/0x410 fs/inode.c:664
iput_final fs/inode.c:1775 [inline]
iput+0x42c/0x5b0 fs/inode.c:1801
do_unlinkat+0x2b9/0x4f0 fs/namei.c:4405
__do_sys_unlink fs/namei.c:4446 [inline]
__se_sys_unlink fs/namei.c:4444 [inline]
__x64_sys_unlink+0x30/0x40 fs/namei.c:4444
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88810271b1a0 of 8 bytes by task 2814 on cpu 1:
virtnet_stats+0x1b3/0x340 drivers/net/virtio_net.c:2564
dev_get_stats+0x6d/0x860 net/core/dev.c:10511
rtnl_fill_stats+0x45/0x320 net/core/rtnetlink.c:1261
rtnl_fill_ifinfo+0xd0e/0x1120 net/core/rtnetlink.c:1867
rtnl_dump_ifinfo+0x7f9/0xc20 net/core/rtnetlink.c:2240
netlink_dump+0x390/0x720 net/netlink/af_netlink.c:2266
netlink_recvmsg+0x425/0x780 net/netlink/af_netlink.c:1992
sock_recvmsg_nosec net/socket.c:1027 [inline]
sock_recvmsg net/socket.c:1049 [inline]
____sys_recvmsg+0x156/0x310 net/socket.c:2760
___sys_recvmsg net/socket.c:2802 [inline]
__sys_recvmsg+0x1ea/0x270 net/socket.c:2832
__do_sys_recvmsg net/socket.c:2842 [inline]
__se_sys_recvmsg net/socket.c:2839 [inline]
__x64_sys_recvmsg+0x46/0x50 net/socket.c:2839
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x000000000045c334 -> 0x000000000045c376
Fixes:
3fa2a1df9094 ("virtio-net: per cpu 64 bit stats (v2)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yan Zhai [Tue, 24 Oct 2023 14:26:40 +0000 (07:26 -0700)]
ipv6: avoid atomic fragment on GSO packets
[ Upstream commit
03d6c848bfb406e9ef6d9846d759e97beaeea113 ]
When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].
Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.
Link: https://www.potaroo.net/presentations/2022-03-01-ipv6-frag.pdf
Fixes:
b210de4f8c97 ("net: ipv6: Validate GSO SKB before finish IPv6 processing")
Reported-by: David Wragg <dwragg@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Link: https://lore.kernel.org/r/90912e3503a242dca0bc36958b11ed03a2696e5e.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Mon, 23 Oct 2023 20:44:35 +0000 (13:44 -0700)]
mptcp: properly account fastopen data
[ Upstream commit
bf0e96108fb6707613dd055aff5e98b02b99bb14 ]
Currently the socket level counter aggregating the received data
does not take in account the data received via fastopen.
Address the issue updating the counter as required.
Fixes:
38967f424b5b ("mptcp: track some aggregate data counters")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-2-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Mon, 23 Oct 2023 18:32:54 +0000 (20:32 +0200)]
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
[ Upstream commit
48cf49d31994ff97b33c4044e618560ec84d35fb ]
snprintf() does not return negative values on error.
To know if the buffer was too small, the returned value needs to be
compared with the length of the passed buffer. If it is greater or
equal, the output has been truncated, so add checks for the truncation
to create_pnp_modalias() and create_of_modalias(). Also make them
return -ENOMEM in that case, as they already do that elsewhere.
Moreover, the remaining size of the buffer used by snprintf() needs to
be updated after the first write to avoid out-of-bounds access as
already done correctly in create_pnp_modalias(), but not in
create_of_modalias(), so change the latter accordingly.
Fixes:
8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Song Liu [Thu, 12 Oct 2023 05:57:41 +0000 (22:57 -0700)]
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
[ Upstream commit
d35381aa73f7e1e8b25f3ed5283287a64d9ddff5 ]
htab_lock_bucket uses the following logic to avoid recursion:
1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();
However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.
This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:
1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().
Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().
Fixes:
20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcel Ziswiler [Wed, 18 Oct 2023 14:47:35 +0000 (16:47 +0200)]
Bluetooth: hci_sync: Fix Opcode prints in bt_dev_dbg/err
[ Upstream commit
530886897c789cf77c9a0d4a7cc5549f0768b5f8 ]
Printed Opcodes may be missing leading zeros:
Bluetooth: hci0: Opcode 0x c03 failed: -110
Fix this by always printing leading zeros:
Bluetooth: hci0: Opcode 0x0c03 failed: -110
Fixes:
d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")
Fixes:
6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ziyang Xuan [Wed, 11 Oct 2023 09:57:31 +0000 (17:57 +0800)]
Bluetooth: Make handle of hci_conn be unique
[ Upstream commit
181a42edddf51d5d9697ecdf365d72ebeab5afb0 ]
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes:
9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Iulia Tanasescu [Wed, 6 Sep 2023 14:01:03 +0000 (17:01 +0300)]
Bluetooth: ISO: Pass BIG encryption info through QoS
[ Upstream commit
1d11d70d1f6b23e7d3fc00396c17b90b876162a4 ]
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of:
181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miri Korenblit [Sun, 22 Oct 2023 14:55:51 +0000 (17:55 +0300)]
wifi: iwlwifi: empty overflow queue during flush
[ Upstream commit
658939fc68d3241f9a0019e224cd7154438c23f2 ]
If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.
Fixes:
a44509805895 ("iwlwifi: move reclaim flows to the queue file")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yedidya Benshimol [Tue, 17 Oct 2023 09:16:48 +0000 (12:16 +0300)]
wifi: iwlwifi: mvm: update IGTK in mvmvif upon D3 resume
[ Upstream commit
ac0c6fdc4c56b669abc1c4a323f1c7a3a1422dd2 ]
During the D3 resume flow, all new rekeys are passed from the FW.
Because the FW supports only one IGTK at a time, every IGTK rekey
update should be done by removing the last IGTK. The mvmvif holds a
pointer to the last IGTK for that reason and thus should be updated
when a new IGTK is passed upon resume.
Fixes:
04f78e242fff ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow")
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.8ceaf7e5ece7.Ief444f6a2703ed76648b4d414f12bb4130bab36e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 17 Oct 2023 09:16:43 +0000 (12:16 +0300)]
wifi: iwlwifi: pcie: synchronize IRQs before NAPI
[ Upstream commit
37fb29bd1f90f16d1abc95c0e9f0ff8eec9829ad ]
When we want to synchronize the NAPI, which was added in
commit
5af2bb3168db ("wifi: iwlwifi: call napi_synchronize()
before freeing rx/tx queues"), we also need to make sure we
can't actually reschedule the NAPI. Yes, this happens while
interrupts are disabled, but interrupts may still be running
or pending. Also call iwl_pcie_synchronize_irqs() to ensure
we won't reschedule the NAPI.
Fixes:
4cf2f5904d97 ("iwlwifi: queue: avoid memory leak in reset flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.a0f4104b479a.Id5c50a944f709092aa6256e32d8c63b2b8d8d3ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 17 Oct 2023 09:16:41 +0000 (12:16 +0300)]
wifi: iwlwifi: mvm: fix netif csum flags
[ Upstream commit
08365d3b9140c751a84f8027ac7d2e662958f768 ]
We shouldn't advertise arbitrary checksum flags since we had
to remove support for it due to broken hardware.
Fixes:
ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.e37327f1a129.Iaee86b00db4db791cd90adaf15384b8c87d2ad49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 30 Aug 2023 08:31:04 +0000 (11:31 +0300)]
wifi: iwlwifi: increase number of RX buffers for EHT devices
[ Upstream commit
2cf254c1e24fa8f01f42f5a8c77617e56bf50b86 ]
EHT devices can support 512 MPDUs in an A-MPDU, each of
which might be an A-MSDU and thus further contain multiple
MSDUs, which need their own buffer each. Increase the number
of buffers to avoid running out in high-throughput scenarios.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.824e522927f1.Ie5b4a2d3953072b9d76054ae67e2e45900d6bba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of:
08365d3b9140 ("wifi: iwlwifi: mvm: fix netif csum flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 11 Oct 2023 10:07:30 +0000 (13:07 +0300)]
wifi: iwlwifi: mvm: remove TDLS stations from FW
[ Upstream commit
7b404c5cff3d4270fcd5212b6776c8484623ac74 ]
When we remove TDLS stations, we need to remove them from FW
immediately, even while associated. Some previous refactoring
here lost the sta ID condition, add it back.
Fixes:
57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.933011e710a9.I77c069c781e8b2b698b86cc3f43fc3c7e2dde114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 11 Oct 2023 10:07:29 +0000 (13:07 +0300)]
wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()
[ Upstream commit
43874283ce6c5bd32ac9d30878b2c96a974357cb ]
When I implemented iwl_mvm_mac_flush_sta() I completely botched it;
it basically always happens after the iwl_mvm_sta_pre_rcu_remove()
call, and that already clears mvm->fw_id_to_mac_id[] entries, so we
cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it
never did anything.
Fix this by just going through the station IDs and now with the new
API for iwl_mvm_flush_sta(), call those.
Fixes:
a6cc6ccb1c8a ("wifi: iwlwifi: mvm: support new flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b5878e93118.I1093e60163052e7be64d2b01424097cd6a272979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 11 Oct 2023 10:07:28 +0000 (13:07 +0300)]
wifi: iwlwifi: mvm: change iwl_mvm_flush_sta() API
[ Upstream commit
391762969769b089c808defc8fce5544a945f9eb ]
This API is type unsafe and needs an extra parameter to know
what kind of station was passed, so it has two, but really it
only needs two values. Just pass the values instead of doing
this type-unsafe dance, which will also make it better to use
for multi-link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.aeb3bf4204cd.I5b0e6d64a67455784bc8fbdaf9ceaf03699d9ce1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of:
43874283ce6c ("wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Wed, 4 Oct 2023 09:36:30 +0000 (12:36 +0300)]
wifi: iwlwifi: mvm: Don't always bind/link the P2P Device interface
[ Upstream commit
84ef7cbe90e9e54c71c1da4e645ba34e1b33da77 ]
It is not necessary to keep the P2P Device bound/linked to a PHY
context when there is no active ROC.
Modify the P2P Device flows so the binding/linking would be done
only while ROC is active. With this change the switch_phy_ctxt()
is no longer needed so remove it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of:
43874283ce6c ("wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Wed, 11 Oct 2023 10:07:20 +0000 (13:07 +0300)]
wifi: iwlwifi: mvm: Fix key flags for IGTK on AP interface
[ Upstream commit
8f9a791a8edd87fa64b35037d9c3bce89a1b8d21 ]
When an IGTK is installed for an AP interface, there is no station
associated with it. However, the MFP flag must be set for the installed
key as otherwise the FW wouldn't use it.
Fix the security key flag to set the MFP flag also when the AP is
an AP interface and the key index matches that of an IGTK.
Fixes:
5c75a208c244 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.f67005e2d4d2.I6832c6e87f3c79fff00689eb10a3a30810e1ee83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Wed, 4 Oct 2023 09:36:34 +0000 (12:36 +0300)]
wifi: iwlwifi: mvm: Correctly set link configuration
[ Upstream commit
35b9281fb710ea9fa47dca56774f4a9606fe9154 ]
In case the link puncturing is changed such that the channel
is no longer punctured, configure the FW correctly indicating
the EHT parameters changed (with a 0 punctured map).
Allow EHT parameters configuration only when the link really
supports EHT.
Fixes:
55eb1c5fa4b2 ("wifi: iwlwifi: mvm: add support for the new LINK command")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rotem Saado [Wed, 4 Oct 2023 09:36:22 +0000 (12:36 +0300)]
wifi: iwlwifi: yoyo: swap cdb and jacket bits values
[ Upstream commit
65008777b9dcd2002414ddb2c2158293a6e2fd6f ]
The bits are wrong, the jacket bit should be 5 and cdb bit 4.
Fix it.
Fixes:
1f171f4f1437 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.356d8dacda2f.I349ab888b43a11baa2453a1d6978a6a703e422f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Thu, 28 Sep 2023 14:35:31 +0000 (17:35 +0300)]
wifi: mac80211: Fix setting vif links
[ Upstream commit
e7182c4e6bbeafa272612e6c06fa92b42ad107ad ]
When setting the interface links, ignore the change iff both the
valid links and the dormant links did not change. This is needed
to support cases where the valid links didn't change but the dormant
links did.
Fixes:
6d543b34dbcf ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.0357b6306587.I7dbfec347949b629fea680d246a650d6207ff217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Thu, 28 Sep 2023 14:35:24 +0000 (17:35 +0300)]
wifi: mac80211: don't recreate driver link debugfs in reconfig
[ Upstream commit
822cab1987a0e028e38b60aecd98af0289b46e7b ]
We can delete any that we want to remove, but we can't
recreate the links as they already exist.
Fixes:
170cd6a66d9a ("wifi: mac80211: add netdev per-link debugfs data and driver hook")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.3d0214838421.I512a0ff86f631ff42bf25ea0cb2e8e8616794a94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 26 Sep 2023 08:07:20 +0000 (11:07 +0300)]
wifi: iwlwifi: mvm: use correct sta ID for IGTK/BIGTK
[ Upstream commit
63ef576c9facf5d92702e249ad213fa73eb434bf ]
We don't (yet) send the IGTK down to the firmware, but when
we do it needs to be with the broadcast station ID, not the
multicast station ID. Same for the BIGTK, which we may send
already if firmware advertises it (but it doesn't yet.)
Fixes:
a5de7de7e78e ("wifi: iwlwifi: mvm: enable TX beacon protection")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.dbc653913353.I82e90c86010f0b9588a180d9835fd11f666f5196@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avraham Stern [Tue, 26 Sep 2023 08:07:18 +0000 (11:07 +0300)]
wifi: iwlwifi: mvm: fix removing pasn station for responder
[ Upstream commit
ff2687612c21a87a58c76099f3d59f8db376b995 ]
In case of MLD operation the station should be removed using the
mld api.
Fixes:
fd940de72d49 ("wifi: iwlwifi: mvm: FTM responder MLO support")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.7eb353abb95c.I2b30be09b99f5a2379956e010bafaa465ff053ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avraham Stern [Tue, 26 Sep 2023 08:07:13 +0000 (11:07 +0300)]
wifi: iwlwifi: mvm: update station's MFP flag after association
[ Upstream commit
5a86dcb4a908845e6b7ff39b78fb1141b895408f ]
The management frames protection flag is always set when the station
is not yet authorized. However, it was not cleared after association
even if the association did not use MFP. As a result, all public
action frames are not parsed by fw (which will cause FTM to fail,
for example). Update the station MFP flag after the station is
authorized.
Fixes:
4c8d5c8d079e ("wifi: iwlwifi: mvm: tell firmware about per-STA MFP enablement")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.2488cbd01bde.Ic0f08b7d3efcbdce27ec897f84d740fec8d169ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 20 Oct 2023 12:57:37 +0000 (12:57 +0000)]
tcp: fix cookie_init_timestamp() overflows
[ Upstream commit
73ed8e03388d16c12fc577e5c700b58a29045a15 ]
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes:
9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 20 Oct 2023 12:57:36 +0000 (12:57 +0000)]
chtls: fix tp->rcv_tstamp initialization
[ Upstream commit
225d9ddbacb102621af6d28ff7bf5a0b4ce249d8 ]
tp->rcv_tstamp should be set to tcp_jiffies, not tcp_time_stamp().
Fixes:
cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nícolas F. R. A. Prado [Fri, 22 Sep 2023 18:44:03 +0000 (14:44 -0400)]
thermal: core: Don't update trip points inside the hysteresis range
[ Upstream commit
cf3986f8c01d355490d0ac6024391b989a9d1e9d ]
When searching for the trip points that need to be set, the nearest
higher trip point's temperature is used for the high trip, while the
nearest lower trip point's temperature minus the hysteresis is used for
the low trip. The issue with this logic is that when the current
temperature is inside a trip point's hysteresis range, both high and low
trips will come from the same trip point. As a consequence instability
can still occur like this:
* the temperature rises slightly and enters the hysteresis range of a
trip point
* polling happens and updates the trip points to the hysteresis range
* the temperature falls slightly, exiting the hysteresis range, crossing
the trip point and triggering an IRQ, the trip points are updated
* repeat
So even though the current hysteresis implementation prevents
instability from happening due to IRQs triggering on the same
temperature value, both ways, it doesn't prevent it from happening due
to an IRQ on one way and polling on the other.
To properly implement a hysteresis behavior, when inside the hysteresis
range, don't update the trip points. This way, the previously set trip
points will stay in effect, which will in a way remember the previous
state (if the temperature signal came from above or below the range) and
therefore have the right trip point already set.
The exception is if there was no previous trip point set, in which case
a previous state doesn't exist, and so it's sensible to allow the
hysteresis range as trip points.
The following logs show the current behavior when running on a real
machine:
[ 202.524658] thermal thermal_zone0: new temperature boundaries: -
2147483647 < x < 40000
203.562817: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37979
[ 203.562845] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000
204.176059: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37979 temp=40028
[ 204.176089] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000
205.226813: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40028 temp=38652
[ 205.226842] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000
And with this patch applied:
[ 184.933415] thermal thermal_zone0: new temperature boundaries: -
2147483647 < x < 40000
185.981182: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37872
186.744685: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37872 temp=40058
[ 186.744716] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000
187.773284: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40058 temp=38698
Fixes:
060c034a9741 ("thermal: Add support for hardware-tracked trip points")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kumar Kartikeya Dwivedi [Fri, 20 Oct 2023 14:48:39 +0000 (14:48 +0000)]
selftests/bpf: Make linked_list failure test more robust
[ Upstream commit
da1055b673f3baac2249571c9882ce767a0aa746 ]
The linked list failure test 'pop_front_off' and 'pop_back_off'
currently rely on matching exact instruction and register values. The
purpose of the test is to ensure the offset is correctly incremented for
the returned pointers from list pop helpers, which can then be used with
container_of to obtain the real object. Hence, somehow obtaining the
information that the offset is 48 will work for us. Make the test more
robust by relying on verifier error string of bpf_spin_lock and remove
dependence on fragile instruction index or register number, which can be
affected by different clang versions used to build the selftests.
Fixes:
300f19dcdb99 ("selftests/bpf: Add BPF linked list API tests")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231020144839.2734006-1-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Sutter [Tue, 17 Oct 2023 09:39:06 +0000 (11:39 +0200)]
net: skb_find_text: Ignore patterns extending past 'to'
[ Upstream commit
c4eee56e14fe001e1cff54f0b438a5e2d0dd7454 ]
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes:
f72b948dcbb8 ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yafang Shao [Sat, 7 Oct 2023 13:59:44 +0000 (13:59 +0000)]
bpf: Fix missed rcu read lock in bpf_task_under_cgroup()
[ Upstream commit
29a7e00ffadddd8d68eff311de1bf12ae10687bb ]
When employed within a sleepable program not under RCU protection, the
use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log,
particularly when CONFIG_PROVE_RCU is enabled:
[ 1259.662357] WARNING: suspicious RCU usage
[ 1259.662358] 6.5.0+ #33 Not tainted
[ 1259.662360] -----------------------------
[ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage!
Other info that might help to debug this:
[ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1
[ 1259.662368] 1 lock held by trace/72954:
[ 1259.662369] #0:
ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0
Stack backtrace:
[ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33
[ 1259.662391] Call Trace:
[ 1259.662393] <TASK>
[ 1259.662395] dump_stack_lvl+0x6e/0x90
[ 1259.662401] dump_stack+0x10/0x20
[ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0
[ 1259.662412] task_css_set.part.0+0x23/0x30
[ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0
[ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93
[ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000
[ 1259.662439] bpf_lsm_bpf+0x5/0x20
[ 1259.662443] ? security_bpf+0x32/0x50
[ 1259.662452] __sys_bpf+0xe6/0xdd0
[ 1259.662463] __x64_sys_bpf+0x1a/0x30
[ 1259.662467] do_syscall_64+0x38/0x90
[ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 1259.662479] RIP: 0033:0x7f487baf8e29
[...]
[ 1259.662504] </TASK>
This issue can be reproduced by executing a straightforward program, as
demonstrated below:
SEC("lsm.s/bpf")
int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size)
{
struct cgroup *cgrp = NULL;
struct task_struct *task;
int ret = 0;
if (cmd != BPF_LINK_CREATE)
return 0;
// The cgroup2 should be mounted first
cgrp = bpf_cgroup_from_id(1);
if (!cgrp)
goto out;
task = bpf_get_current_task_btf();
if (bpf_task_under_cgroup(task, cgrp))
ret = -1;
bpf_cgroup_release(cgrp);
out:
return ret;
}
After running the program, if you subsequently execute another BPF program,
you will encounter the warning.
It's worth noting that task_under_cgroup_hierarchy() is also utilized by
bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup()
doesn't exhibit this issue because it cannot be used in sleepable BPF
programs.
Fixes:
b5ad4cdc46c7 ("bpf: Add bpf_task_under_cgroup() kfunc")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: Feng Zhou <zhoufeng.zf@bytedance.com>
Cc: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20231007135945.4306-1-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Schneider-Pargmann [Mon, 18 Sep 2023 10:07:06 +0000 (12:07 +0200)]
thermal/drivers/mediatek: Fix probe for THERMAL_V2
[ Upstream commit
5055fadfa7e16f2427d5b3c40b2bf563ddfdab22 ]
Fix the probe function to call mtk_thermal_release_periodic_ts for
everything != MTK_THERMAL_V1. This was accidentally changed from V1
to V2 in the original patch.
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Closes: https://lore.kernel.org/lkml/
B0B3775B-B8D1-4284-814F-
4F41EC22F532@public-files.de/
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Closes: https://lore.kernel.org/lkml/
07a569b9-e691-64ea-dd65-
3b49842af33d@linaro.org/
Fixes:
33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Thu, 12 Oct 2023 06:51:13 +0000 (08:51 +0200)]
r8169: fix rare issue with broken rx after link-down on RTL8125
[ Upstream commit
621735f590643e3048ca2060c285b80551660601 ]
In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.
Fixes:
f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Martin Kjær Jørgensen <me@lagy.org>
Link: https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9edde757-9c3b-4730-be3b-0ef3a374ff71@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Sat, 7 Oct 2023 08:59:39 +0000 (11:59 +0300)]
thermal: core: prevent potential string overflow
[ Upstream commit
c99626092efca3061b387043d4a7399bf75fbdd5 ]
The dev->id value comes from ida_alloc() so it's a number between zero
and INT_MAX. If it's too high then these sprintf()s will overflow.
Fixes:
203d3d4aa482 ("the generic thermal sysfs driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jinjie Ruan [Sun, 8 Oct 2023 02:58:52 +0000 (10:58 +0800)]
wifi: rtw88: Remove duplicate NULL check before calling usb_kill/free_urb()
[ Upstream commit
de8dd096949820ce5656d41ce409a67603e79327 ]
Both usb_kill_urb() and usb_free_urb() do the NULL check itself, so there
is no need to duplicate it prior to calling.
Fixes:
a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231008025852.1239450-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heng Qi [Sun, 8 Oct 2023 06:27:43 +0000 (14:27 +0800)]
virtio-net: fix the vq coalescing setting for vq resize
[ Upstream commit
f61fe5f081cf40de08d0a4c89659baf23c900f0c ]
According to the definition of virtqueue coalescing spec[1]:
Upon disabling and re-enabling a transmit virtqueue, the device MUST set
the coalescing parameters of the virtqueue to those configured through the
VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver did not set
any TX coalescing parameters, to 0.
Upon disabling and re-enabling a receive virtqueue, the device MUST set
the coalescing parameters of the virtqueue to those configured through the
VIRTIO_NET_CTRL_NOTF_COAL_RX_SET command, or, if the driver did not set
any RX coalescing parameters, to 0.
We need to add this setting for vq resize (ethtool -G) where vq_reset happens.
[1] https://lists.oasis-open.org/archives/virtio-dev/202303/msg00415.html
Fixes:
394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heng Qi [Sun, 8 Oct 2023 06:27:42 +0000 (14:27 +0800)]
virtio-net: fix per queue coalescing parameter setting
[ Upstream commit
bfb2b3609162135625bf96acf5118051cd0d082e ]
When the user sets a non-zero coalescing parameter to 0 for a specific
virtqueue, it does not work as expected, so let's fix this.
Fixes:
394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heng Qi [Sun, 8 Oct 2023 06:27:41 +0000 (14:27 +0800)]
virtio-net: consistently save parameters for per-queue
[ Upstream commit
e9420838ab4ffb82850095549e94dcee3f7fe0cb ]
When using .set_coalesce interface to set all queue coalescing
parameters, we need to update both per-queue and global save values.
Fixes:
394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>