powerpc/mm: Fix reporting of kernel execute faults on the 8xx

[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]

On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.

This patch adds DSISR_PROTFAULT in the test mask.

Fixes: d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fbcon: Fix unregister crash when more than one framebuffer

[ Upstream commit 2122b40580dd9d0620398739c773d07a7b7939d0 ]

When unregistering fbdev using unregister_framebuffer(), any bound
console will unbind automatically. This is working fine if this is the
only framebuffer, resulting in a switch to the dummy console. However if
there is a fb0 and I unregister fb1 having a bound console, I eventually
get a crash. The fastest way for me to trigger the crash is to do a
reboot, resulting in this splat:

[   76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c
[   76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm]
[   76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4
[   76.478933] Hardware name: BCM2835
[   76.478949] Backtrace:
[   76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24)
[   76.479022]  r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81
[   76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28)
[   76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c)
[   76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58)
[   76.479165]  r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84
[   76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c)
[   76.479222]  r6:d7666a00 r5:c0e918ee r4:dbc4e700
[   76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88)
[   76.479281]  r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00
[   76.479298]  r4:20000113
[   76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54)
[   76.479374]  r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc
[   76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230)
[   76.479435]  r4:c0e9192f r3:d758a340
[   76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c)
[   76.479495]  r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8
[   76.479513]  r4:d8a8fabc
[   76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184)
[   76.479570]  r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280
[   76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc)
[   76.479632]  r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002
[   76.479650]  r4:c0eb65ec
[   76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168)
[   76.479716]  r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0
[   76.479734]  r4:00000000
[   76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0)
[   76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48)
[   76.479823]  r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8
[   76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98)

The problem is in the console rebinding in fbcon_fb_unbind(). It uses the
virtual console index as the new framebuffer index to bind the console(s)
to. The correct way is to use the con2fb_map lookup table to find the
framebuffer index.

Fixes: cfafca8067c6 ("fbdev: fbcon: console unregistration from unregister_framebuffer")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/APEI: Clear GHES block_status before panic()

[ Upstream commit 98cff8b23ed1c763a029ee81ea300df0d153d07d ]

In __ghes_panic() clear the block status in the APEI generic
error status block for that generic hardware error source before
calling panic() to prevent a second panic() in the crash kernel
for exactly the same fatal error.

Otherwise ghes_probe(), running in the crash kernel, would see
an unhandled error in the APEI generic error status block and
panic again, thereby precluding any crash dump.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: David Arcari <darcari@redhat.com>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Fix an issue that PME is not enabled during runtime suspend

[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ]

I210 ethernet card doesn't wakeup when a cable gets plugged. It's
because its PME is not set.

Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime
suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
calling pci_finish_runtime_suspend(), which enables the PCI PME.

To fix the issue, let's not to save PCI states when it's runtime
suspend, to let the PCI subsystem enables PME.

Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: define proper net_device::neigh_priv_len

[ Upstream commit 31389b53b3e0b535867af9090a5d19ec64768d55 ]

Out of bound read reported by KASan.

i40iw_net_event() reads unconditionally 16 bytes from
neigh->primary_key while the memory allocated for
"neighbour" struct is evaluated in neigh_alloc() as

  tbl->entry_size + dev->neigh_priv_len

where "dev" is a net_device.

But the driver does not setup dev->neigh_priv_len and
we read beyond the neigh entry allocated memory,
so the patch in the next mail fixes this.

Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fbmem: behave better with small rotated displays and many CPUs

[ Upstream commit f75df8d4b4fabfad7e3cba2debfad12741c6fde7 ]

Blitting an image with "negative" offsets is not working since there
is no clipping. It hopefully just crashes. For the bootup logo, there
is protection so that blitting does not happen as the image is drawn
further and further to the right (ROTATE_UR) or further and further
down (ROTATE_CW). There is however no protection when drawing in the
opposite directions (ROTATE_UD and ROTATE_CCW).

Add back this protection.

The regression is 20-odd years old but the mindless warning-killing
mentality displayed in commit 34bdb666f4b2 ("fbdev: fbmem: remove
positive test on unsigned values") is also to blame, methinks.

Fixes: 448d479747b8 ("fbdev: fb_do_show_logo() updates")
Signed-off-by: Peter Rosin <peda@axentia.se>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Fabian Frederick <ffrederick@users.sourceforge.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
cc: Geoff Levand <geoff@infradead.org>
Cc: James Simmons <jsimmons@users.sf.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: fix raid10 hang issue caused by barrier

[ Upstream commit e820d55cb99dd93ac2dc949cf486bb187e5cd70d ]

When both regular IO and resync IO happen at the same time,
and if we also need to split regular. Then we can see tasks
hang due to barrier.

1. resync thread
[ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds.
[ 1463.757207]       Not tainted 4.19.5-1-default #1
[ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.757212] md1_resync      D    0  5215      2 0x80000000
[ 1463.757216] Call Trace:
[ 1463.757223]  ? __schedule+0x29a/0x880
[ 1463.757231]  ? raise_barrier+0x8d/0x140 [raid10]
[ 1463.757236]  schedule+0x78/0x110
[ 1463.757243]  raise_barrier+0x8d/0x140 [raid10]
[ 1463.757248]  ? wait_woken+0x80/0x80
[ 1463.757257]  raid10_sync_request+0x1f6/0x1e30 [raid10]
[ 1463.757265]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.757284]  ? is_mddev_idle+0x125/0x137 [md_mod]
[ 1463.757302]  md_do_sync.cold.78+0x404/0x969 [md_mod]
[ 1463.757311]  ? wait_woken+0x80/0x80
[ 1463.757336]  ? md_rdev_init+0xb0/0xb0 [md_mod]
[ 1463.757351]  md_thread+0xe9/0x140 [md_mod]
[ 1463.757358]  ? _raw_spin_unlock_irqrestore+0x2e/0x60
[ 1463.757364]  ? __kthread_parkme+0x4c/0x70
[ 1463.757369]  kthread+0x112/0x130
[ 1463.757374]  ? kthread_create_worker_on_cpu+0x40/0x40
[ 1463.757380]  ret_from_fork+0x3a/0x50

2. regular IO
[ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds.
[ 1463.760683]       Not tainted 4.19.5-1-default #1
[ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.760687] kworker/0:8     D    0  5367      2 0x80000000
[ 1463.760718] Workqueue: md submit_flushes [md_mod]
[ 1463.760721] Call Trace:
[ 1463.760731]  ? __schedule+0x29a/0x880
[ 1463.760741]  ? wait_barrier+0xdd/0x170 [raid10]
[ 1463.760746]  schedule+0x78/0x110
[ 1463.760753]  wait_barrier+0xdd/0x170 [raid10]
[ 1463.760761]  ? wait_woken+0x80/0x80
[ 1463.760768]  raid10_write_request+0xf2/0x900 [raid10]
[ 1463.760774]  ? wait_woken+0x80/0x80
[ 1463.760778]  ? mempool_alloc+0x55/0x160
[ 1463.760795]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760801]  ? try_to_wake_up+0x44/0x470
[ 1463.760810]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760816]  ? wait_woken+0x80/0x80
[ 1463.760831]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760851]  md_make_request+0x78/0x190 [md_mod]
[ 1463.760860]  generic_make_request+0x1c6/0x470
[ 1463.760870]  raid10_write_request+0x77a/0x900 [raid10]
[ 1463.760875]  ? wait_woken+0x80/0x80
[ 1463.760879]  ? mempool_alloc+0x55/0x160
[ 1463.760895]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760904]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760910]  ? wait_woken+0x80/0x80
[ 1463.760926]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760931]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.760936]  ? finish_task_switch+0x74/0x260
[ 1463.760954]  submit_flushes+0x21/0x40 [md_mod]

So resync io is waiting for regular write io to complete to
decrease nr_pending (conf->barrier++ is called before waiting).
The regular write io splits another bio after call wait_barrier
which call nr_pending++, then the splitted bio would continue
with raid10_write_request -> wait_barrier, so the splitted bio
has to wait for barrier to be zero, then deadlock happens as
follows.

resync io regular io

raise_barrier
wait_barrier
generic_make_request
wait_barrier

To resolve the issue, we need to call allow_barrier to decrease
nr_pending before generic_make_request since regular IO is not
issued to underlying devices, and wait_barrier is called again
to ensure no internal IO happening.

Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Reported-and-tested-by: Siniša Bandin <sinisa@4net.rs>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: clps711x-fb: release disp device node in probe()

[ Upstream commit fdac751355cd76e049f628afe6acb8ff4b1399f7 ]

clps711x_fb_probe() increments refcnt of disp device node by
of_parse_phandle() and leaves it undecremented on both
successful and error paths.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: Avoid Clang warning about pointless switch statment

[ Upstream commit a52c5a16cf19d8a85831bb1b915a221dd4ffae3c ]

There are several warnings from Clang about no case statement matching
the constant 0:

In file included from drivers/block/drbd/drbd_receiver.c:48:
In file included from drivers/block/drbd/drbd_int.h:48:
In file included from ./include/linux/drbd_genl_api.h:54:
In file included from ./include/linux/genl_magic_struct.h:236:
./include/linux/drbd_genl.h:321:1: warning: no case matching constant
switch condition '0'
GENL_struct(DRBD_NLA_HELPER, 24, drbd_helper_info,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/genl_magic_struct.h:220:10: note: expanded from macro
'GENL_struct'
        switch (0) {
                ^

Silence this warning by adding a 'case 0:' statement. Additionally,
adjust the alignment of the statements in the ct_assert_unique macro to
avoid a checkpatch warning.

This solution was originally sent by Arnd Bergmann with a default case
statement: https://lore.kernel.org/patchwork/patch/756723/

Link: https://github.com/ClangBuiltLinux/linux/issues/43
Suggested-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: skip spurious timeout (ping-timeo) when failing promote

[ Upstream commit 9848b6ddd8c92305252f94592c5e278574e7a6ac ]

If you try to promote a Secondary while connected to a Primary
and allow-two-primaries is NOT set, we will wait for "ping-timeout"
to give this node a chance to detect a dead primary,
in case the cluster manager noticed faster than we did.

But if we then are *still* connected to a Primary,
we fail (after an additional timeout of ping-timout).

This change skips the spurious second timeout.

Most people won't notice really,
since "ping-timeout" by default is half a second.

But in some installations, ping-timeout may be 10 or 20 seconds or more,
and spuriously delaying the error return becomes annoying.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: disconnect, if the wrong UUIDs are attached on a connected peer

[ Upstream commit b17b59602b6dcf8f97a7dc7bc489a48388d7063a ]

With "on-no-data-accessible suspend-io", DRBD requires the next attach
or connect to be to the very same data generation uuid tag it lost last.

If we first lost connection to the peer,
then later lost connection to our own disk,
we would usually refuse to re-connect to the peer,
because it presents the wrong data set.

However, if the peer first connects without a disk,
and then attached its disk, we accepted that same wrong data set,
which would be "unexpected" by any user of that DRBD
and cause "undefined results" (read: very likely data corruption).

The fix is to forcefully disconnect as soon as we notice that the peer
attached to the "wrong" dataset.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: narrow rcu_read_lock in drbd_sync_handshake

[ Upstream commit d29e89e34952a9ad02c77109c71a80043544296e ]

So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().

This included cases like:

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      drbd_bcast_event
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        mutex_lock --> may sleep

While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.

Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Fix thresholding counter data for unknown type

[ Upstream commit 17cfccc91545682513541924245abb876d296063 ]

MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
Thresholding counter can be used to count latency cycles such as
load miss to reload. But threshold counter value is not relevant
when the sampled instruction type is unknown or reserved. Patch to
fix the thresholding counter value to zero when sampled instruction
type is unknown or reserved.

Fixes: 170a315f41c6('powerpc/perf: Support to export MMCRA[TEC*] field to userspace')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()

[ Upstream commit 4f68ef64cd7feb1220232bd8f501d8aad340a099 ]

The function cw1200_bss_info_changed() and cw1200_hw_scan() can be
concurrently executed.
The two functions both access a possible shared variable "frame.skb".

This shared variable is freed by dev_kfree_skb() in cw1200_upload_beacon(),
which is called by cw1200_bss_info_changed(). The free operation is
protected by a mutex lock "priv->conf_mutex" in cw1200_bss_info_changed().

In cw1200_hw_scan(), this shared variable is accessed without the
protection of the mutex lock "priv->conf_mutex".
Thus, concurrency use-after-free bugs may occur.

To fix these bugs, the original calls to mutex_lock(&priv->conf_mutex) and
mutex_unlock(&priv->conf_mutex) are moved to the places, which can
protect the accesses to the shared variable.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: increase fw status register read timeout

[ Upstream commit 65111785acccb836ec75263b03b0e33f21e74f47 ]

Problem:
 - during the driver initialization, driver will poll fw
   for KERNEL_UP in a 30 seconds timeout.

 - if the firmware is not ready after 30 seconds,
   driver will not be loaded.

Fix:
 - change timeout from 30 seconds to 3 minutes.

Reported-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com>
Reviewed-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: correct volume status

[ Upstream commit 7ff44499bafbd376115f0bb6b578d980f56ee13b ]

- fix race condition when a unit is deleted after an RLL,
  and before we have gotten the LV_STATUS page of the unit.
  - In this case we will get a standard inquiry, rather than
    the desired page.  This will result in a unit presented
    which no longer exists.
  - If we ask for LV_STATUS, insure we get LV_STATUS

Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com>
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: correct host serial num for ssa

[ Upstream commit b2346b5030cf9458f30a84028d9fe904b8c942a7 ]

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com>
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com>
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum: Properly cleanup LAG uppers when removing port from LAG

[ Upstream commit be2d6f421f680e01d58f7cd452646e0d8586d49b ]

When a LAG device or a VLAN device on top of it is enslaved to a bridge,
the driver propagates the CHANGEUPPER event to the LAG's slaves.

This causes each physical port to increase the reference count of the
internal representation of the bridge port by calling
mlxsw_sp_port_bridge_join().

However, when a port is removed from a LAG, the corresponding leave()
function is not called and the reference count is not decremented. This
leads to ugly hacks such as mlxsw_sp_bridge_port_should_destroy() that
try to understand if the bridge port should be destroyed even when its
reference count is not 0.

Instead, make sure that when a port is unlinked from a LAG it would see
the same events as if the LAG (or its uppers) were unlinked from a
bridge.

The above is achieved by walking the LAG's uppers when a port is
unlinked and calling mlxsw_sp_port_bridge_leave() for each upper that is
enslaved to a bridge.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix unnecessary error message for HCI request completion

[ Upstream commit 1629db9c75342325868243d6bca5853017d91cf8 ]

In case a command which completes in Command Status was sent using the
hci_cmd_send-family of APIs there would be a misleading error in the
hci_get_cmd_complete function, since the code would be trying to fetch
the Command Complete parameters when there are none.

Avoid the misleading error and silently bail out from the function in
case the received event is a command status.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi

[ Upstream commit fa89a4593b927b3f59c3b69379f31d3b22272e4e ]

gcc warn this:

net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn:
 always true condition '(spi <= 4294967295) => (0-u32max <= u32max)'

'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX
because of wrap around. So the second forloop will never reach.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix radiotap vendor presence bitmap handling

[ Upstream commit efc38dd7d5fa5c8cdd0c917c5d00947aa0539443 ]

Due to the alignment handling, it actually matters where in the code
we add the 4 bytes for the presence bitmap to the length; the first
field is the timestamp with 8 byte alignment so we need to add the
space for the extra vendor namespace presence bitmap *before* we do
any alignment for the fields.

Move the presence bitmap length accounting to the right place to fix
the alignment for the data properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/uaccess: fix warning/error with access_ok()

[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]

With the following piece of code, the following compilation warning
is encountered:

if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) {

drivers/platform/test/dev.c: In function 'my_ioctl':
drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable]
   int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

This patch fixes it by referencing 'type' in the macro allthough
doing nothing with it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

percpu: convert spin_lock_irq to spin_lock_irqsave.

[ Upstream commit 6ab7d47bcbf0144a8cb81536c2cead4cde18acfe ]

From Michael Cree:
  "Bisection lead to commit b38d08f3181c ("percpu: restructure
   locking") as being the cause of lockups at initial boot on
   the kernel built for generic Alpha.

   On a suggestion by Tejun Heo that:

   So, the only thing I can think of is that it's calling
   spin_unlock_irq() while irq handling isn't set up yet.
   Can you please try the followings?

   1. Convert all spin_[un]lock_irq() to
      spin_lock_irqsave/unlock_irqrestore()."

Fixes: b38d08f3181c ("percpu: restructure locking")
Reported-and-tested-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: dsps: fix otg state machine

[ Upstream commit 6010abf2c2c0e382d7e8ee44bd11f343aae90cce ]

Due to lack of ID pin interrupt event on AM335x devices, the musb dsps
driver uses polling to detect usb device attach for dual-role port.

But in the case if a micro-A cable adapter is attached without a USB device
attached to the cable, the musb state machine gets stuck in a_wait_vrise
state waiting for the MUSB_CONNECT interrupt which won't happen due to the
usb device is not attached. The state is stuck in a_wait_vrise even after
the micro-A cable is detached, which could cause VBUS retention if then the
dual-role port is attached to a host port.

To fix the problem, make a_wait_vrise as a transient state, then move the
state to either a_wait_bcon for host port or a_idle state for dual-role
port, if no usb device is attached to the port.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: KVM: Skip MMIO insn after emulation

[ Upstream commit 0d640732dbebed0f10f18526de21652931f0b2f2 ]

When we emulate an MMIO instruction, we advance the CPU state within
decode_hsr(), before emulating the instruction effects.

Having this logic in decode_hsr() is opaque, and advancing the state
before emulation is problematic. It gets in the way of applying
consistent single-step logic, and it prevents us from being able to fail
an MMIO instruction with a synchronous exception.

Clean this up by only advancing the CPU state *after* the effects of the
instruction are emulated.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe: Fix unchecked usage of strncpy()

[ Upstream commit bef0b8970f27da5ca223e522a174d03e2587761d ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

In this case the 'target' buffer is coming from a list of build-ids that
are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so
probably we're safe, but since we're using strncpy() here, use strlcpy()
instead to provide the intended safety checking without the using the
problematic strncpy() function.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/probe-file.c: In function 'probe_cache__open.isra.5':
  util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation]
     strncpy(sbuildid, target, SBUILD_ID_SIZE);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1f3736c9c833 ("perf probe: Show all cached probes")
Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf header: Fix unchecked usage of strncpy()

[ Upstream commit 7572588085a13d5db02bf159542189f52fdb507e ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/header.c: In function 'perf_event__synthesize_event_update_unit':
  util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
    strncpy(ev->data, evsel->unit, size);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/header.c:3579:16: note: length computed here
    size_t size = strlen(evsel->unit);
                  ^~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type")
Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Fix perf_event_attr test failure

[ Upstream commit 741dad88dde296999da30332157ca47f0543747d ]

Fix inconsistent use of tabs and spaces error:

  # perf test 16 -v
  16: Setup struct perf_event_attr                          :
  --- start ---
  test child forked, pid 20224
    File "/usr/libexec/perf-core/tests/attr.py", line 119
      log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
                                                                 ^
  TabError: inconsistent use of tabs and spaces in indentation
  test child finished with -1
  ---- end ----
  Setup struct perf_event_attr: FAILED!

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: samsung: Properly set flags in autoCTS mode

[ Upstream commit 31e933645742ee6719d37573a27cce0761dcf92b ]

Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
has changed the way the autoCTS mode is handled.

According to that change, serial drivers which enable H/W autoCTS mode must
set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-xenon: Fix timeout checks

[ Upstream commit 0e6e7c2ff397e1bbebc882ca3132148aaaef1ddd ]

Always check the wait condition before returning timeout.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Zhoujie Wu <zjwu@marvell.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-of-esdhc: Fix timeout checks

[ Upstream commit ea6d027312111c6d96309ad1a684b33cb37e6764 ]

Always check the wait condition before returning timeout.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick: Prevent memstick host from getting runtime suspended during card detection

[ Upstream commit e03e303edf1c63e6dd455ccd568c74e93ef3ba8c ]

We can use MEMSTICK_POWER_{ON,OFF} along with pm_runtime_{get,put}
helpers to let memstick host support runtime pm.

The rpm count may go down to zero before the memstick host powers on, so
the host can be runtime suspended.

So before doing card detection, increment the rpm count to avoid the
host gets runtime suspended. Balance the rpm count after card detection
is done.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: bcm2835: reset host on timeout

[ Upstream commit f6000a4eb34e6462bc0dd39809c1bb99f9633269 ]

The bcm2835 mmc host tends to lock up for unknown reason so reset it on
timeout. The upper mmc block layer tries retransimitting with single
blocks which tends to work out after a long wait.

This is better than giving up and leaving the machine broken for no
obvious reason.

Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: bcm2835: Recover from MMC_SEND_EXT_CSD

[ Upstream commit 07d405769afea5718529fc9e341f0b13b3189b6f ]

If the user issues an "mmc extcsd read", the SD controller receives
what it thinks is a SEND_IF_COND command with an unexpected data block.
The resulting operations leave the FSM stuck in READWAIT, a state which
persists until the MMC framework resets the controller, by which point
the root filesystem is likely to have been unmounted.

A less heavyweight solution is to detect the condition and nudge the
FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.

Link: https://github.com/raspberrypi/linux/issues/2728
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S: Only report KVM_CAP_SPAPR_TCE_VFIO on powernv machines

[ Upstream commit 693ac10a88a2219bde553b2e8460dbec97e594e6 ]

The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the
availability of in kernel tce acceleration for vfio. However it is
currently the case that this is only available on a powernv machine,
not for a pseries machine.

Thus make this capability dependent on having the cpu feature
CPU_FTR_HVMODE.

[paulus@ozlabs.org - fixed compilation for Book E.]

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M

[ Upstream commit add6883619a9e3bf9658eaff1a547354131bbcd9 ]

eukrea-tlv320.c machine driver runs on non-DT platforms
and include <asm/mach-types.h> header file in order to be able
to use some machine_is_eukrea_xxx() macros.

Building it for ARM64 causes the following build error:

sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory

Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320
driver when ARM64 is selected.

This is needed in preparation for the i.MX8M support.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: pxa: avoid section mismatch warning

[ Upstream commit 88af3209aa0881aa5ffd99664b6080a4be5f24e5 ]

WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info()
The function littleton_init_lcd() references
the function __init pxa_set_fb_info().
This is often because littleton_init_lcd lacks a __init
annotation or the annotation of pxa_set_fb_info is wrong.

WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info()
The function zeus_register_ohci() references
the function __init pxa_set_ohci_info().
This is often because zeus_register_ohci lacks a __init
annotation or the annotation of pxa_set_ohci_info is wrong.

WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info()
The function cm_x300_init_u2d() references
the function __init pxa3xx_set_u2d_info().
This is often because cm_x300_init_u2d lacks a __init
annotation or the annotation of pxa3xx_set_u2d_info is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: use __bpf_constant_htons in test_prog.c

[ Upstream commit a0517a0f7ef23550b4484c37e2b9c2d32abebf64 ]

For some reason, my older GCC (< 4.8) isn't smart enough to optimize the
!__builtin_constant_p() branch in bpf_htons, I see:
  error: implicit declaration of function '__builtin_bswap16'

Let's use __bpf_constant_htons as suggested by Daniel Borkmann.

I tried to use simple htons, but it produces the following:
  test_progs.c:54:17: error: braced-group within expression allowed only
  inside a function
    .eth.h_proto = htons(ETH_P_IP),

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

switchtec: Fix SWITCHTEC_IOCTL_EVENT_IDX_ALL flags overwrite

[ Upstream commit e4a7dca5de625018b29417ecc39dc5037d9a5a36 ]

In the ioctl_event_ctl() SWITCHTEC_IOCTL_EVENT_IDX_ALL case, we call
event_ctl() several times with the same "ctl" struct.  Each call clobbers
ctl.flags, which leads to the problem that we may not actually enable or
disable all events as the user requested.

Preserve the event flag value with a temporary variable.

Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")
Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix BUG on corrupted inode

[ Upstream commit d288d95842f1503414b7eebce3773bac3390457e ]

When inode is corrupted so that extent type is invalid, some functions
(such as udf_truncate_extents()) will just BUG. Check that extent type
is valid when loading the inode to memory.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: sun4i-usb: add support for missing USB PHY index

[ Upstream commit 2659392e5c08dff626e6db1d739adff58a94604d ]

The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a
3.0 port with dedicated PHY) and USB2 (which doesn't exist at all).

Add support for this kind of missing USB PHY index.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c-axxia: check for error conditions first

[ Upstream commit 4f5c85fe3a60ace555d09898166af372547f97fc ]

It was observed that when using seqentional mode contrary to the
documentation, the SS bit (which is supposed to only be set if
automatic/sequence command completed normally), is sometimes set
together with NA (NAK in address phase) causing transfer to falsely be
considered successful.

My assumption is that this does not happen during manual mode since the
controller is stopping its work the moment it sets NA/ND bit in status
register. This is not the case in Automatic/Sequentional mode where it
is still working to send STOP condition and the actual status we get
depends on the time when the ISR is run.

This patch changes the order of checking status bits in ISR - error
conditions are checked first and only if none of them occurred, the
transfer may be considered successful. This is required to introduce
using of sequentional mode in next patch.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

OPP: Use opp_table->regulators to verify no regulator case

[ Upstream commit 90e3577b5feb42bac1269e16bb3d2bdd8f6df40f ]

The value of opp_table->regulator_count is not very consistent right now
and it may end up being 0 while we do have a "opp-microvolt" property in
the OPP table. It was kept that way as we used to check if any
regulators are set with the OPP core for a device or not using value of
regulator_count.

Lets use opp_table->regulators for that purpose as the meaning of
regulator_count is going to change in the later patches.

Reported-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: big.LITTLE: fix refcount leak

[ Upstream commit 9456823c842f346c74265fcd98d008d87a7eb6f5 ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
bl_idle_init() doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx6sl: ensure MMDC CH0 handshake is bypassed

[ Upstream commit 0efcc2c0fd2001a83240a8c3d71f67770484917e ]

Same as other i.MX6 SoCs, ensure unused MMDC channel's
handshake is bypassed, this is to make sure no request
signal will be generated when periphe_clk_sel is changed
or SRC warm reset is triggered.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sata_rcar: fix deferred probing

[ Upstream commit 9f83cfdb1ace3ef268ecc6fda50058d2ec37d603 ]

The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Use explicit mb() when moving cons pointer

[ Upstream commit a868e8530441286342f90c1fd9c5f24de3aa2880 ]

After removing an entry from a queue (e.g. reading an event in
arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer
pointer to free the queue slot back to the SMMU. A memory barrier is
required here so that all reads targetting the queue entry have
completed before the consumer pointer is updated.

The implementation of queue_inc_cons() relies on a writel() to complete
the previous reads, but this is incorrect because writel() is only
guaranteed to complete prior writes. This patch replaces the call to
writel() with an mb(); writel_relaxed() sequence, which gives us the
read->write ordering which we require.

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu: Add support for qcom,smmu-v2 variant

[ Upstream commit 89cddc563743cb1e0068867ac97013b2a5bf86aa ]

qcom,smmu-v2 is an arm,smmu-v2 implementation with specific
clock and power requirements.
On msm8996, multiple cores, viz. mdss, video, etc. use this
smmu. On sdm845, this smmu is used with gpu.
Add bindings for the same.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Disable CSP for stream OUT ep

[ Upstream commit 244add8ebfb231c39db9e33b204bd0ce8f24f782 ]

In stream mode, when fast-forwarding TRBs, the stream number
is not cleared causing the new stream to not get assigned. So
we don't want controller to carry on transfers when short packet
is received. So disable the CSP for stream capable endpoint.

This is based on the 3.30a Programming guide, where table 3-1
device descriptor structure field definitions says for CSP bit
If this bit is 0, the controller generates an XferComplete event
and remove the stream. So if we keep CSP as 1 then switching between
streams would not happen as in stream mode, when fast-forwarding
TRBs, the stream number is not cleared causing the new stream to not get
assigned.

Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: renesas_wdt: don't set divider while watchdog is running

[ Upstream commit e990e12741877e9bfac402ca468f4007a75f6e2a ]

The datasheet says we must stop the timer before changing the clock
divider. This can happen when the restart handler is called while the
watchdog is running.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix up the D-Link DIR-685 MTD partition info

[ Upstream commit 738a05e673435afb986b53da43befd83ad87ec3b ]

The vendor firmware was analyzed to get the right idea about
this flash layout. /proc/mtd contains:

dev:    size   erasesize  name
mtd0: 01e7ff40 00020000 "rootfs"
mtd1: 01f40000 00020000 "upgrade"
mtd2: 00040000 00020000 "rgdb"
mtd3: 00020000 00020000 "nvram"
mtd4: 00040000 00020000 "RedBoot"
mtd5: 00020000 00020000 "LangPack"
mtd6: 02000000 00020000 "flash"

Here "flash" is obviously the whole device and we know "rootfs"
is a bogus hack to point to a squashfs rootfs inside of the main
"upgrade partition". We know "RedBoot" is the first 0x40000 of
the flash and the "upgrade" partition follows from 0x40000 to
0x1f8000. So we have mtd0, 1, 4 and 6 covered.

Remains:
mtd2: 00040000 00020000 "rgdb"
mtd3: 00020000 00020000 "nvram"
mtd5: 00020000 00020000 "LangPack"

Inspecting the flash at 0x1f8000 and 0x1fa000 reveals each of
these starting with "RGCFG1" so we assume 0x1f8000-1fbfff is
"rgdb" of 0x40000.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: fix H.264 deblocking filter controls

[ Upstream commit 75fa6e4f83a0923fe753827d354998d448b4fd6a ]

Add support for the third loop filter mode
V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and
V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls.

The filter offset controls are signed values in the -6 to 6 range and
are stored into the slice header fields slice_alpha_c0_offset_div2 and
slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are
double their value, in range of -12 to 12.

Rename variables to more closely match the nomenclature in the H.264
specification.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: bpf: fix encoding bug for mm_srlv32_op

[ Upstream commit 17f6c83fb5ebf7db4fcc94a5be4c22d5a7bfe428 ]

For micro-mips, srlv inside POOL32A encoding space should use 0x50
sub-opcode, NOT 0x90.

Some early version ISA doc describes the encoding as 0x90 for both srlv and
srav, this looks to me was a typo. I checked Binutils libopcode
implementation which is using 0x50 for srlv and 0x90 for srav.

v1->v2:
  - Keep mm_srlv32_op sorted by value.

Fixes: f31318fdf324 ("MIPS: uasm: Add srlv uasm instruction")
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix OMAP4430 SDP Ethernet startup

[ Upstream commit 84fb6c7feb1494ebb7d1ec8b95cfb7ada0264465 ]

It was noticed that unbinding and rebinding the KSZ8851 ethernet
resulted in the driver reporting "failed to read device ID" at probe.
Probing the reset line with a 'scope while repeatedly attempting to
bind the driver in a shell loop revealed that the KSZ8851 RSTN pin is
constantly held at zero, meaning the device is held in reset, and
does not respond on the SPI bus.

Experimentation with the startup delay on the regulator set to 50ms
shows that the reset is positively released after 20ms.

Schematics for this board are not available, and the traces are buried
in the inner layers of the board which makes tracing where the RSTN pin
extremely difficult.  We can only guess that the RSTN pin is wired to a
reset generator chip driven off the ethernet supply, which fits the
observed behaviour.

Include this delay in the regulator startup delay - effectively
treating the reset as a "supply stable" indicator.

This can not be modelled as a delay in the KSZ8851 driver since the
reset generation is board specific - if the RSTN pin had been wired to
a GPIO, reset could be released earlier via the already provided support
in the KSZ8851 driver.

This also got confirmed by Peter Ujfalusi <peter.ujfalusi@ti.com> based
on Blaze schematics that should be very close to SDP4430:

TPS22902YFPR is used as the regulator switch (gpio48 controlled):
Convert arm boot_lock to raw The VOUT is routed to TPS3808G01DBV.
(SCH Note: Threshold set at 90%. Vsense: 0.405V).

According to the TPS3808 data sheet the RESET delay time when Ct is
open (this is the case in the schema): MIN/TYP/MAX: 12/20/28 ms.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated with notes from schematics from Peter]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Fix amd_iommu=force_isolation

[ Upstream commit c12b08ebbe16f0d3a96a116d86709b04c1ee8e74 ]

The parameter is still there but it's ignored. We need to check its
value before deciding to go into passthrough mode for AMD IOMMU v2
capable device.

We occasionally use this parameter to force v2 capable device into
translation mode to debug memory corruption that we suspect is
caused by DMA writes.

To address the following comment from Joerg Roedel on the first
version, v2 capability of device is completely ignored.
> This breaks the iommu_v2 use-case, as it needs a direct mapping for the
> devices that support it.

And from Documentation/admin-guide/kernel-parameters.txt:
  This option does not override iommu=pt

Fixes: aafd8ba0ca74 ("iommu/amd: Implement add_device and remove_device")

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sx150x: handle failure case of devm_kstrdup

[ Upstream commit a9d9f6b83f1bb05da849b3540e6d1f70ef1c2343 ]

devm_kstrdup() may return NULL if internal allocation failed.
Thus using  label, name  is unsafe without checking. Therefor
in the unlikely case of allocation failure, sx150x_probe() simply
returns -ENOMEM.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: trace: add missing break statement to make compiler happy

[ Upstream commit 54d48183d21e03f780053d7129312049cb5dd591 ]

The missed break statement in the outer switch makes the code fall through
always and thus always same value will be printed.

Besides that, compiler warns about missed fall through marker:

drivers/usb/dwc3/./trace.h: In function ‘trace_raw_output_dwc3_log_trb’:
drivers/usb/dwc3/./trace.h:246:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
    switch (pcm) {
    ^~~~~~

Add the missing break statement to work correctly without compilation
warnings.

Fixes: fa8d965d736b ("usb: dwc3: trace: pretty print high-bandwidth transfers too")
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Unreserve a reserved request when it is completed

[ Upstream commit ca95f802ef5139722acc8d30aeaab6fe5bbe939e ]

Currently, When a reserved operation is completed, its entry in the send
queue will not be unreserved, which leads to the miscalculation of
qp->s_avail and thus the triggering of a WARN_ON call trace. This patch
fixes the problem by unreserving the reserved operation when it is
completed.

Fixes: 856cc4c237ad ("IB/hfi1: Add the capability for reserved operations")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kobject: return error code if writing /sys/.../uevent fails

[ Upstream commit df44b479654f62b478c18ee4d8bc4e9f897a9844 ]

Propagate error code back to userspace if writing the /sys/.../uevent
file fails. Before, the write operation always returned with success,
even if we failed to recognize the input string or if we failed to
generate the uevent itself.

With the error codes properly propagated back to userspace, we are
able to react in userspace accordingly by not assuming and awaiting
a uevent that is not delivered.

Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Move async_synchronize_full call

[ Upstream commit c37d721c68ad88925ba0e72f6e14acb829a8c6bb ]

Move the async_synchronize_full call out of __device_release_driver and
into driver_detach.

The idea behind this is that the async_synchronize_full call will only
guarantee that any existing async operations are flushed. This doesn't do
anything to guarantee that a hotplug event that may occur while we are
doing the release of the driver will not be asynchronously scheduled.

By moving this into the driver_detach path we can avoid potential deadlocks
as we aren't holding the device lock at this point and we should not have
the driver we want to flush loaded so the flush will take care of any
asynchronous events the driver we are detaching might have scheduled.

Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks

[ Upstream commit 6e6da2039c82271dd873b9ad2b902a692a7dd554 ]

All the audio interfaces on Allwinner SoCs need to change their module
clocks during operation, to switch between support for 44.1 kHz and 48
kHz family sample rates. The clock rate for the module clocks is
governed by their upstream audio PLL. The module clocks themselves only
have a gate, and sometimes a divider or mux. Thus any rate changes need
to be propagated upstream.

Set the CLK_SET_RATE_PARENT flag for all audio module clocks to achieve
this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)

[ Upstream commit a0678e2eed41e81004308693ac84ea95614b0920 ]

Fix the issue: device doesn't accept LGO_U1/U2:
1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2
    by default;
2. enable/disable controller to initiate requests for transition into
    U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE;

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

timekeeping: Use proper seqcount initializer

[ Upstream commit ce10a5b3954f2514af726beb78ed8d7350c5e41c ]

tk_core.seq is initialized open coded, but that misses to initialize the
lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq
consequently lack a name and are hard to read.

Use the proper initializer which takes care of the lockdep map
initialization.

[ tglx: Massaged changelog ]

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: tj@kernel.org
Cc: johannes.berg@intel.com
Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: hub: delay hub autosuspend if USB3 port is still link training

[ Upstream commit e86108940e541febf35813402ff29fa6f4a9ac0b ]

When initializing a hub we want to give a USB3 port in link training
the same debounce delay time before autosuspening the hub as already
trained, connected enabled ports.

USB3 ports won't reach the enabled state with "current connect status" and
"connect status change" bits set until the USB3 link training finishes.

Catching the port in link training (polling) and adding the debounce delay
prevents unnecessary failed attempts to autosuspend the hub.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()

[ Upstream commit b7a4fbe2300a8965ea760c7e871507b84aea17f6 ]

Availability of TRB's is calculated using dwc3_calc_trbs_left(), which
determines total available TRB's based on the HWO bit set in a TRB.

In the present code, __dwc3_prepare_one_trb() is called with a TRB which
needs to be prepared for transfer. This __dwc3_prepare_one_trb() calls
dwc3_calc_trbs_left() to determine total available TRBs and set IOC bit
if the total available TRBs are zero. Since the present working TRB (which
is passed as an argument to __dwc3_prepare_one_trb() )  doesn't yet have
the HWO bit set before calling dwc3_calc_trbs_left(), there are chances
that dwc3_calc_trbs_left() wrongly calculates this present working TRB
as free(since the HWO bit is not yet set) and returns the total available
TRBs as greater than zero (including the present working TRB). This could
be a problem.

This patch corrects the above mentioned problem in __dwc3_prepare_one_trb()
by increementing the dep->trb_enqueue at the last (after preparing the TRB)
instead of increementing at the start and setting the IOC bit only if the
total available TRBs returned by dwc3_calc_trbs_left() is 1 . Since we are
increementing the dep->trb_enqueue at the last, the present working TRB is
also considered as available by dwc3_calc_trbs_left() and non zero value is
returned . So, according to the modified logic, when the total available
TRBs is equal to 1 that means the total available TRBs in the pool are 0.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smack: fix access permissions for keyring

[ Upstream commit 5b841bfab695e3b8ae793172a9ff7990f99cc3e2 ]

Function smack_key_permission() only issues smack requests for the
following operations:
 - KEY_NEED_READ (issues MAY_READ)
 - KEY_NEED_WRITE (issues MAY_WRITE)
 - KEY_NEED_LINK (issues MAY_WRITE)
 - KEY_NEED_SETATTR (issues MAY_WRITE)
A blank smack request is issued in all other cases, resulting in
smack access being granted if there is any rule defined between
subject and object, or denied with -EACCES otherwise.

Request MAY_READ access for KEY_NEED_SEARCH and KEY_NEED_VIEW.
Fix the logic in the unlikely case when both MAY_READ and
MAY_WRITE are needed. Validate access permission field for valid
contents.

Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: DaVinci-VPBE: fix error handling in vpbe_initialize()

[ Upstream commit aa35dc3c71950e3fec3e230c06c27c0fbd0067f8 ]

If vpbe_set_default_output() or vpbe_set_default_mode() fails,
vpbe_initialize() returns error code without releasing resources.

The patch adds error handling for that case.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/fpu: Add might_fault() to user_insn()

[ Upstream commit 6637401c35b2f327a35d27f44bda05e327f2f017 ]

Every user of user_insn() passes an user memory pointer to this macro.

Add might_fault() to user_insn() so we can spot users which are using
this macro in sections where page faulting is not allowed.

 [ bp: Space it out to make it more visible. ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181128222035.2996-6-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: mmp2: fix TWSI2

[ Upstream commit 1147e05ac9fc2ef86a3691e7ca5c2db7602d81dd ]

Marvell keeps their MMP2 datasheet secret, but there are good clues
that TWSI2 is not on 0xd4025000 on that platform, not does it use
IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:

   arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP  58

I'm taking a somewhat educated guess that is probably a copy & paste
error from PXA168 or PXA910 and that the real controller in fact hides
at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.

I'm also copying some properties from TWSI1 that were missing or
incorrect.

Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: ftrace: don't adjust the LR value

[ Upstream commit 6e803e2e6e367db9a0d6ecae1bd24bb5752011bd ]

The core ftrace code requires that when it is handed the PC of an
instrumented function, this PC is the address of the instrumented
instruction. This is necessary so that the core ftrace code can identify
the specific instrumentation site. Since the instrumented function will
be a BL, the address of the instrumented function is LR - 4 at entry to
the ftrace code.

This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers,
which acquire the PC of the instrumented function.

The mcount_get_lr helper is used to acquire the LR of the instrumented
function, whose value does not require this adjustment, and cannot be
adjusted to anything meaningful. No adjustment of this value is made on
other architectures, including arm. However, arm64 adjusts this value by
4.

This patch brings arm64 in line with other architectures and removes the
adjustment of the LR value.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: improve special ap message cmd handling

[ Upstream commit be534791011100d204602e2e0496e9e6ce8edf63 ]

There exist very few ap messages which need to have the 'special' flag
enabled. This flag tells the firmware layer to do some pre- and maybe
postprocessing. However, it may happen that this special flag is
enabled but the firmware is unable to deal with this kind of message
and thus returns with reply code 0x41. For example older firmware may
not know the newest messages triggered by the zcrypt device driver and
thus react with reject and the named reply code. Unfortunately this
reply code is not known to the zcrypt error routines and thus default
behavior is to switch the ap queue offline.

This patch now makes the ap error routine aware of the reply code and
so userspace is informed about the bad processing result but the queue
is not switched to offline state any more.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware/efi: Add NULL pointer checks in efivars API functions

[ Upstream commit ab2180a15ce54739fed381efb4cb12e78dfb1561 ]

Since commit:

   ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables")

we have a device driver accessing the efivars API. Several functions in
the efivars API assume __efivars is set, i.e., that they will be accessed
only after efivars_register() has been called. However, the following NULL
pointer access was reported calling efivar_entry_size() from the brcmfmac
device driver:

  Unable to handle kernel NULL pointer dereference at virtual address 00000008
  pgd = 60bfa5f1
  [00000008] *pgd=00000000
  Internal error: Oops: 5 [#1] SMP ARM
  ...
  Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
  Workqueue: events request_firmware_work_func
  PC is at efivar_entry_size+0x28/0x90
  LR is at brcmf_fw_complete_request+0x3f8/0x8d4 [brcmfmac]
  pc : [<c0c40718>]    lr : [<bf2a3ef4>]    psr: a00d0113
  sp : ede7fe28  ip : ee983410  fp : c1787f30
  r10: 00000000  r9 : 00000000  r8 : bf2b2258
  r7 : ee983000  r6 : c1604c48  r5 : ede7fe88  r4 : edf337c0
  r3 : 00000000  r2 : 00000000  r1 : ede7fe88  r0 : c17712c8
  Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: ad16804a  DAC: 00000051

Disassembly showed that the local static variable __efivars is NULL,
which is not entirely unexpected given that it is a non-EFI platform.

So add a NULL pointer check to efivar_entry_size(), and to related
functions while at it. In efivars_register() a couple of sanity checks
are added as well.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-9-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Thermal: do not clear passive state during system sleep

[ Upstream commit 964f4843a455d2ffb199512b08be8d5f077c4cac ]

commit ff140fea847e ("Thermal: handle thermal zone device properly
during system sleep") added PM hook to call thermal zone reset during
sleep. However resetting thermal zone will also clear the passive state
and thus cancel the polling queue which leads the passive cooling device
state not being cleared properly after sleep.

thermal_pm_notify => thermal_zone_device_reset set passive to 0
thermal_zone_trip_update will skip update passive as `old_target ==
instance->target'.
monitor_thermal_zone => thermal_zone_device_set_polling will cancel
tz->poll_queue, so the cooling device state will not be changed
afterwards.

Reported-by: Kame Wang <kamewang@google.com>
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: io: Ensure value passed to __iormb() is held in a 64-bit register

[ Upstream commit 1b57ec8c75279b873639eb44a215479236f93481 ]

As of commit 6460d3201471 ("arm64: io: Ensure calls to delay routines
are ordered against prior readX()"), MMIO reads smaller than 64 bits
fail to compile under clang because we end up mixing 32-bit and 64-bit
register operands for the same data processing instruction:

./include/asm-generic/io.h:695:9: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
        return readb(addr);
               ^
./arch/arm64/include/asm/io.h:147:58: note: expanded from macro 'readb'
                                                                       ^
./include/asm-generic/io.h:695:9: note: use constraint modifier "w"
./arch/arm64/include/asm/io.h:147:50: note: expanded from macro 'readb'
                                                               ^
./arch/arm64/include/asm/io.h:118:24: note: expanded from macro '__iormb'
        asm volatile("eor       %0, %1, %1\n"                           \
                                    ^

Fix the build by casting the macro argument to 'unsigned long' when used
as an input to the inline asm.

Reported-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Clear state->acquire_ctx before leaving drm_atomic_helper_commit_duplicated_state()

[ Upstream commit aa394b0dd68cb00c483e151dcd84713d4d517ed1 ]

drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to
the context given in the argument and leaves it in state after it
quits. The lifetime of state and context are not guaranteed to be the
same, so we shouldn't leave that pointer hanging around. This patch
resets the context to NULL to avoid any oopses.

Changes in v2:
- Added to the set

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd4: fix crash on writing v4_end_grace before nfsd startup

[ Upstream commit 62a063b8e7d1db684db3f207261a466fa3194e72 ]

Anatoly Trosinenko reports that this:

1) Checkout fresh master Linux branch (tested with commit e195ca6cb)
2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build
3) From `kvm-xfstests shell`:

results in NULL dereference in locks_end_grace.

Check that nfsd has been started before trying to end the grace period.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: bcm: brcmstb: Don't leak device tree node reference

[ Upstream commit 1861a7f07e02292830a1ca256328d370deefea30 ]

of_find_node_by_path() acquires a reference to the node returned by it
and that reference needs to be dropped by its caller. soc_is_brcmstb()
doesn't do that, so fix it.

[treding: slightly rewrite to avoid inline comparison]

Fixes: d52fad262041 ("soc: add stubs for brcmstb SoC's")
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN

[ Upstream commit a11f6ca9aef989b56cd31ff4ee2af4fb31a172ec ]

__vdc_tx_trigger should only loop on EAGAIN a finite
number of times.

See commit adddc32d6fde ("sunvnet: Do not spin in an
infinite loop when vio_ldc_send() returns EAGAIN") for detail.

Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: io: Ensure calls to delay routines are ordered against prior readX()

[ Upstream commit 6460d32014717686d3b7963595950ba2c6d1bb5e ]

A relatively standard idiom for ensuring that a pair of MMIO writes to a
device arrive at that device with a specified minimum delay between them
is as follows:

writel_relaxed(42, dev_base + CTL1);
readl(dev_base + CTL1);
udelay(10);
writel_relaxed(42, dev_base + CTL2);

the intention being that the read-back from the device will push the
prior write to CTL1, and the udelay will hold up the write to CTL1 until
at least 10us have elapsed.

Unfortunately, on arm64 where the underlying delay loop is implemented
as a read of the architected counter, the CPU does not guarantee
ordering from the readl() to the delay loop and therefore the delay loop
could in theory be speculated and not provide the desired interval
between the two writes.

Fix this in a similar manner to PowerPC by introducing a dummy control
dependency on the output of readX() which, combined with the ISB in the
read of the architected counter, guarantees that a subsequent delay loop
can not be executed until the readX() has returned its result.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sh_mobile: add support for r8a77990 (R-Car E3)

[ Upstream commit 5eb316e636eb298c204f5b368526d4480b63c0ba ]

Add support for the IIC code for the r8a77990 (R-Car E3).

It is not considered compatible with existing fallback bindings
due to the documented absence of automatic transmission registers.

These registers are currently not used by the driver and
thus the provides the same behaviour for "renesas,iic-r8a77990" and
"renesas,rcar-gen3-iic". The point of declaring incompatibility is
to allow for automatic transmission register support to be added to
"renesas,iic-r8a77990" and "renesas,rcar-gen3-iic" in future.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix wrong return value of f2fs_acl_create

[ Upstream commit f6176473a0c7472380eef72ebeb330cf9485bf0a ]

When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create()
should return -EIO instead of -ENOMEM, this patch makes it consistent
with posix_acl_create() which has been fixed in commit beaf226b863a
("posix_acl: don't ignore return value of posix_acl_create_masq()").

Fixes: 83dfe53c185e ("f2fs: fix reference leaks in f2fs_acl_create")
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix race between write_checkpoint and write_begin

[ Upstream commit 2866fb16d67992195b0526d19e65acb6640fb87f ]

The following race could lead to inconsistent SIT bitmap:

Task A                          Task B
======                          ======
f2fs_write_checkpoint
  block_operations
    f2fs_lock_all
      down_write(node_change)
      down_write(node_write)
      ... sync ...
      up_write(node_change)
                                f2fs_file_write_iter
                                  set_inode_flag(FI_NO_PREALLOC)
                                  ......
                                  f2fs_write_begin(index=0, has inline data)
                                    prepare_write_begin
                                      __do_map_lock(AIO) => down_read(node_change)
                                      f2fs_convert_inline_page => update SIT
                                      __do_map_lock(AIO) => up_read(node_change)
  f2fs_flush_sit_entries <= inconsistent SIT
  finish write checkpoint
  sudden-power-off

If SPO occurs after checkpoint is finished, SIT bitmap will be set
incorrectly.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: move dir data flush to write checkpoint process

[ Upstream commit b61ac5b720146c619c7cdf17eff2551b934399e5 ]

This patch move dir data flush to write checkpoint process, by
doing this, it may reduce some time for dir fsync.

pre:
-f2fs_do_sync_file enter
-file_write_and_wait_range  <- flush & wait
-write_checkpoint
-do_checkpoint     <- wait all
-f2fs_do_sync_file exit

now:
-f2fs_do_sync_file enter
-write_checkpoint
-block_operations   <- flush dir & no wait
-do_checkpoint     <- wait all
-f2fs_do_sync_file exit

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: pi433: fix potential null dereference

[ Upstream commit 64c4c4ca6c129a4191e8e1e91b2d5d9b8d08c518 ]

Add a test for successful call to cdev_alloc() to avoid
potential null dereference. Issue reported by smatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Fixes: 874bcba65f9a ("staging: pi433: New driver")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: SPCR: Consider baud rate 0 as preconfigured state

[ Upstream commit b413b1abeb21b4a152c0bf8d1379efa30759b6e3 ]

Since SPCR 1.04 [1] the baud rate of 0 means a preconfigured state of UART.
Assume firmware or bootloader configures console correctly.

[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: adv*/tc358743/ths8200: fill in min width/height/pixelclock

[ Upstream commit 2912289a518077ddb8214e05336700148e97e235 ]

The v4l2_dv_timings_cap struct is used to do sanity checks when setting and
enumerating DV timings, ensuring that only valid timings as per the HW
capabilities are allowed.

However, many drivers just filled in 0 for the minimum width, height or
pixelclock frequency. This can cause timings with e.g. 0 as width and height
to be accepted, which will in turn lead to a potential division by zero.

Fill in proper values are minimum boundaries. 640x350 was chosen since it is
the smallest resolution in v4l2-dv-timings.h. Same for 13 MHz as the lowest
pixelclock frequency (it's slightly below the minimum of 13.5 MHz in the
v4l2-dv-timings.h header).

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID

[ Upstream commit 7f6232e69539971cf9eaed07a6c14ab4a2361133 ]

Various 2-in-1's use KIOX010A and KIOX020A as HIDs for 2 KXCJ91008
accelerometers. The KIOX010A HID is for the one in the base and the
KIOX020A for the accelerometer in the keyboard.

Since userspace does not have a way yet to deal with (or ignore) the
accelerometer in the keyboard, this commit just adds the KIOX010A HID
for now so that display rotation will work.

Related: https://github.com/hadess/iio-sensor-proxy/issues/166
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: meson-saradc: fix internal clock names

[ Upstream commit 50314f98b0ac468218e7c9af8c99f215a35436df ]

Before this patch we are registering the internal clocks (for example on
Meson8b, where the SAR ADC IP block implements the divider and gate
clocks) with the following names:
- /soc/cbus@c1100000/adc@8680#adc_div
- /soc/cbus@c1100000/adc@8680#adc_en

This is bad because the common clock framework uses the clock to create
a directory in <debugfs>/clk. With such name, the directory creation
(silently) fails and the debugfs entry ends up being created at the
debugfs root.

With this change, the new clock names are:
- c1108680.adc#adc_div
- c1108680.adc#adc_en

This matches the clock naming scheme used in the PWM, Ethernet and MMC
drivers. It also fixes the problem with debugfs.
The idea is shamelessly taken from commit b96e9eb62841c5 ("pwm: meson:
Fix mux clock names").

Fixes: 3921db46a8c5bc ("iio: Convert to using %pOF instead of full_name")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: meson-saradc: check for devm_kasprintf failure

[ Upstream commit aad172b017617994343e36d8659c69e14cd694fd ]

devm_kasprintf() may return NULL on failure of internal allocation thus
the assignments to  init.name  are not safe if not checked. On error
meson_sar_adc_clk_init() returns negative values so -ENOMEM in the
(unlikely) failure case of devm_kasprintf() should be fine here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll

[ Upstream commit aeaebcc17cdf37065d2693865eeb1ff1c7dc5bf3 ]

Clang warns:

drivers/dma/xilinx/zynqmp_dma.c:166:4: warning: attribute 'aligned' is
ignored, place it after "struct" to apply attribute to type declaration
[-Wignored-attributes]
}; __aligned(64)
   ^
./include/linux/compiler_types.h:200:38: note: expanded from macro
'__aligned'
                                               ^
1 warning generated.

As Nick pointed out in the previous version of this patch, the author
likely intended for this struct to be 8-byte (64-bit) aligned, not
64-byte, which is the default. Remove the hanging __aligned attribute.

Fixes: b0cc417c1637 ("dmaengine: Add Xilinx zynqmp dma engine driver support")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp: Fix pass zero to ERR_PTR() in ptp_clock_register

[ Upstream commit aea0a897af9e44c258e8ab9296fad417f1bc063a ]

Fix smatch warning:

drivers/ptp/ptp_clock.c:298 ptp_clock_register() warn:
 passing zero to 'ERR_PTR'

'err' should be set while device_create_with_groups and
pps_register_source fails

Fixes: 85a66e550195 ("ptp: create "pins" together with the rest of attributes")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-vcodec: Release device nodes in mtk_vcodec_init_enc_pm()

[ Upstream commit 8ea0f2ba0fa3f91ea1b8d823a54b042026ada6b3 ]

of_parse_phandle() returns the device node with refcount incremented.
There are two nodes that are used temporary in mtk_vcodec_init_enc_pm(),
but their refcounts are not decremented.

The patch adds one of_node_put() and fixes returning error codes.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: Don't leak device tree node reference

[ Upstream commit 9eb40fa2cd2d1f6829e7b49bb22692f754b9cfe0 ]

of_find_node_by_path() acquires a reference to the node returned by it
and that reference needs to be dropped by its caller. soc_is_tegra()
doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
[treding: slightly rewrite to avoid inline comparison]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Add Hygon Dhyana support

[ Upstream commit 4787eff3fa88f62fede6ed7afa06477ae6bf984d ]

The tool perf is useful for the performance analysis on the Hygon Dhyana
platform. But right now there is no Hygon support for it to analyze the
KVM guest os data. So add Hygon Dhyana support to it by checking vendor
string to share the code path of AMD.

Signed-off-by: Pu Wen <puwen@hygon.cn>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: validate symbol names also in find_elf_symbol

[ Upstream commit 5818c683a619c534c113e1f66d24f636defc29bc ]

If an ARM mapping symbol shares an address with a valid symbol,
find_elf_symbol can currently return the mapping symbol instead, as the
symbol is not validated. This can result in confusing warnings:

  WARNING: vmlinux.o(.text+0x18f4028): Section mismatch in reference
  from the function set_reset_devices() to the variable .init.text:$x.0

This change adds a call to is_valid_name to find_elf_symbol, similarly
to how it's already used in find_elf_symbol2.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: EQ, Use the right place to store/read IRQ affinity hint

[ Upstream commit 1e86ace4c140fd5a693e266c9b23409358f25381 ]

Currently the cpu affinity hint mask for completion EQs is stored and
read from the wrong place, since reading and storing is done from the
same index, there is no actual issue with that, but internal irq_info
for completion EQs stars at MLX5_EQ_VEC_COMP_BASE offset in irq_info
array, this patch changes the code to use the correct offset to store
and read the IRQ affinity hint.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: hwmod: Fix some section annotations

[ Upstream commit c10b26abeb53cabc1e6271a167d3f3d396ce0218 ]

When building the kernel with Clang, the following section mismatch
warnings appears:

WARNING: vmlinux.o(.text+0x2d398): Section mismatch in reference from
the function _setup() to the function .init.text:_setup_iclk_autoidle()
The function _setup() references
the function __init _setup_iclk_autoidle().
This is often because _setup lacks a __init
annotation or the annotation of _setup_iclk_autoidle is wrong.

WARNING: vmlinux.o(.text+0x2d3a0): Section mismatch in reference from
the function _setup() to the function .init.text:_setup_reset()
The function _setup() references
the function __init _setup_reset().
This is often because _setup lacks a __init
annotation or the annotation of _setup_reset is wrong.

WARNING: vmlinux.o(.text+0x2d408): Section mismatch in reference from
the function _setup() to the function .init.text:_setup_postsetup()
The function _setup() references
the function __init _setup_postsetup().
This is often because _setup lacks a __init
annotation or the annotation of _setup_postsetup is wrong.

_setup is used in omap_hwmod_allocate_module, which isn't marked __init
and looks like it shouldn't be, meaning to fix these warnings, those
functions must be moved out of the init section, which this patch does.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: fix for mailbox read size

[ Upstream commit fa68d4f8476bea4cdf441062b614b41bb85ef1da ]

Some of the functions (like cdn_dp_dpcd_read, cdn_dp_get_edid_block)
allow to read 64KiB, but the cdn_dp_mailbox_read_receive, that is
used by them, can read only up to 255 bytes at once. Normally, it's
not a big issue as DPCD or EDID reads won't (hopefully) exceed that
value.
The real issue here is the revocation list read during the HDCP
authentication process. (problematic use case:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/rockchip/cdn-dp-reg.c#1152)
The list can reach 127*5+4 bytes (num devs * 5 bytes per ID/Bksv +
4 bytes of an additional info).
In other words - CTSes with HDCP Repeater won't pass without this
fix. Oh, and the driver will most likely stop working (best case
scenario).

Signed-off-by: Damian Kos <dkos@cadence.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1541518625-25984-1-git-send-email-dkos@cadence.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbnet: smsc95xx: fix rx packet alignment

[ Upstream commit 810eeb1f41a9a272eedc94ca18c072e75678ede4 ]

The smsc95xx driver already takes into account the NET_IP_ALIGN
parameter when setting up the receive packet data, which means
we do not need to worry about aligning the packets in the usbnet
driver.

Adding the EVENT_NO_IP_ALIGN means that the IPv4 header is now
passed to the ip_rcv() routine with the start on an aligned address.

Tested on Raspberry Pi B3.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: iio: ad7780: update voltage on read

[ Upstream commit 336650c785b62c3bea7c8cf6061c933a90241f67 ]

The ad7780 driver previously did not read the correct device output, as
it read an outdated value set at initialization. It now updates its
voltage on read.

Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>