drm/amdgpu: Write masked value to control register

On the dce_v6_0 and dce_v8_0 hpd tear down callback, the tmp variable
should be written into the control register instead of 0.

Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix scratch register access method in SRIOV

The scratch register should be accessed through MMIO instead of RLCG
in SRIOV, since it being used in RLCG register access function.

Fixes: d54762cc3e6a ("drm/amdgpu: nuke dynamic gfx scratch reg allocation")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove acc_size from reserve/unreserve mem

TTM used to track the "acc_size" of all BOs internally. We needed to
keep track of it in our memory reservation to avoid TTM running out
of memory in its own accounting. However, that "acc_size" accounting
has since been removed from TTM. Therefore we don't really need to
track it any more.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2

Protect the struct amdgpu_bo_list with a mutex. This is used during command
submission in order to avoid buffer object corruption as recorded in
the link below.

v2 (chk): Keep the mutex looked for the whole CS to avoid using the
  list from multiple CS threads at the same time.

Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Vitaly Prosyak <Vitaly.Prosyak@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2048
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add comment to HW_IP_VCN_ENC type

From VCN4, AMDGPU_HW_IP_VCN_ENC is re-used to support
both encoding and decoding jobs.

Link: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/245/commits
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable mode1 reset for smu_v13_0_7

enable mode1 reset for smu_v13_0_7 since it's missing.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct the PSP_BL_CMD enum

To match with the enum defined in trusted os

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop runpm from amdgpu_device structure

It's redundant, as now switching to rpm_mode to indicate
runtime power management mode.

Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop runtime pm disablement quirk on several sienna cichlid cards

This quirk is not needed any more as it's fixed by bypassing
SMU FW reloading in runtime resume.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip SMU FW reloading in runpm BACO case

SMU is always alive, so it's fine to skip SMU FW reloading
when runpm resumed from BACO, this can avoid some race issues
when resuming SMU.

Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: introduce runtime pm mode

It can benefit code consistency in future.

Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary NULL check in commit_planes_for_stream()

Smatch complains that:

    drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3369 commit_planes_for_stream()
    warn: variable dereferenced before check 'stream' (see line 3114)

The 'stream' pointer cannot be NULL and the check can be removed.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Clarify asics naming in Kconfig options

Clarify which architecture those asics acronyms refers to.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix spelling mistake "supporing" -> "supporting"

There is a spelling mistake in a dml_print message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable building new display engine with KCOV enabled

The new display engine uses floating point math, which is not supported
by KCOV. Commit 9d1d02ff3678 ("drm/amd/display: Don't build DCN1 when kcov
is enabled") tried to work around the problem by disabling
CONFIG_DRM_AMD_DC_DCN if KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS
are enabled. The result is that KCOV can not be enabled on systems which
require this display engine. A much simpler and less invasive solution is
to disable KCOV selectively when compiling the display enagine while
keeping it enabled for the rest of the kernel.

Fixes: 9d1d02ff3678 ("drm/amd/display: Don't build DCN1 when kcov is enabled")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restore original stable pstate on ctx fini

Save the original stable pstate on ctx init and restore
it on ctx fini so that we restore a manually selected
stable pstate on ctx exit.

v2: fix init order (Alex)
v3: don't add new variable to ctx struct (Evan)

Fixes: c65b364c52ba ("drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the same HDP flush registers for all nbio 2.3.x

Align RDNA2.x with other asics.  One HDP bit per SDMA instance,
aligned with firmware.  This is effectively a revert of
commit 369b7d04baf3 ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.

Fixes: 369b7d04baf3 ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the same HDP flush registers for all nbio 7.4.x

Align aldebaran with all other asics.  One HDP bit per
SDMA instance, aligned with firmware.  This is effectively
a revert of
commit a0f9f8546668 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.

Fixes: a0f9f8546668 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: create I2S platform devices for Jadeite platform

Jadeite platform uses I2S MICSP instance.
Create platform devices for DMA controller and I2S controller for
Jadeite platform.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add dmi check for jadeite platform

DMI check is required to distinguish Jadeite platform from
Stoney base variant.
Add DMI check logic for Jadeite platform.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Call trace info was found in dmesg when loading amdgpu

In the case of SRIOV, the register smnMp1_PMI_3_FIFO will get an invalid
value which will cause the "shift out of bound". In Ubuntu22.04, this
issue will be checked an related call trace will be reported in dmesg.

Signed-off-by: lin cao <lin.cao@amd.com>
Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix for coding style issues

Fixed below checkpatch warnings and errors

drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:131: CHECK: Comparison to NULL could be written "apd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:150: CHECK: Comparison to NULL could be written "apd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:196: CHECK: Prefer kernel type 'u64' over 'uint64_t'
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:224: CHECK: Please don't use multiple blank lines
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:226: CHECK: Comparison to NULL could be written "!adev->acp.acp_genpd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:233: CHECK: Please don't use multiple blank lines
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:239: CHECK: Alignment should match open parenthesis
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:241: CHECK: Comparison to NULL could be written "!adev->acp.acp_cell"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:247: CHECK: Comparison to NULL could be written "!adev->acp.acp_res"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:253: CHECK: Comparison to NULL could be written "!i2s_pdata"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:350: CHECK: Alignment should match open parenthesis
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:550: ERROR: that open brace { should be on the previous line

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc ras functions for umc v8_10_0

1. Support query umc ras error counter.
2. Support ras umc ue error address remapping.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc v8_10_0 ip headers

Add umc v8_10_0 register offset and shift masks
header files

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Get rid of amdgpu_job->external_hw_fence

This is a follow-up cleanup to [1]. See bellow refcount balancing
for calling amdgpu_job_submit_direct after this cleanup as far
as I calculated.

amdgpu_fence_emit
dma_fence_init 1
dma_fence_get(fence) 2
rcu_assign_pointer(*ptr, dma_fence_get(fence) 3

---> amdgpu_job_submit_direct completes before fence signaled
amdgpu_sa_bo_free
(*sa_bo)->fence = dma_fence_get(fence) 4

amdgpu_job_free
dma_fence_put 3

amdgpu_vcn_enc_get_destroy_msg
*fence = dma_fence_get(f) 4
dma_fence_put(f); 3

amdgpu_vcn_enc_ring_test_ib
dma_fence_put(fence) 2

amdgpu_fence_process
dma_fence_put 1

amdgpu_sa_bo_remove_locked
dma_fence_put 0

---> amdgpu_job_submit_direct completes after fence signaled
amdgpu_fence_process
dma_fence_put 2

amdgpu_job_free
dma_fence_put 1

amdgpu_vcn_enc_get_destroy_msg
*fence = dma_fence_get(f) 2
dma_fence_put(f); 1

amdgpu_vcn_enc_ring_test_ib
dma_fence_put(fence) 0

[1] - https://patchwork.kernel.org/project/dri-devel/cover/20220624180955.485440-1-andrey.grodzovsky@amd.com/

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: limiting AV1 to first instance on VCN4 decode

AV1 is only supported on first instance.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-fixes-2022-07-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes:

 - dma-buf: revert change to fence handling
 - mgag200: fix PCI register initialization

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YtAjgcWC1zkNOGWa@linux-uq9g

Merge tag 'amd-drm-next-5.20-2022-07-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.20-2022-07-14:

amdgpu:
- DCN3.2 updates
- DC SubVP support
- DP MST fixes
- Audio fixes
- DC code cleanup
- SMU13 updates
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11
- Soft reset for SDMA 6
- Add gfxoff status query for vangogh
- Improve BO domain pinning
- Fix timestamps for cursor only commits
- MES fixes
- DCN 3.1.4 support
- Misc fixes
- Misc code cleanup

amdkfd:
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
- fix possible list corruption on queue failure

radeon:
- Fix bogus power of two warning

UAPI:
- Unified memory for CWSR save/restore area for KFD
  Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com

drm/mgag200: Don't read-back PCI option register before writing

Remove the read operation from mgag200_init_pci_options(). It was
incorrectly added while refactoring the code. Reading the PCI option
register clears the register's new value and subsequently leads to
re-writing the old value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: ce19021fd99a ("drm/mgag200: Move PCI-option setup into model-specific code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220708072114.13960-1-tzimmermann@suse.de

dma-buf: revert "return only unsignaled fences in dma_fence_unwrap_for_each v3"

This reverts commit 8f61973718485f3e89bc4f408f929048b7b47c83.

It turned out that this is not correct. Especially the sync_file info
IOCTL needs to see even signaled fences to correctly report back their
status to userspace.

Instead add the filter in the merge function again where it makes sense.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712102849.1562-1-christian.koenig@amd.com

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/amd/display: remove duplicate dcn314 includes

Several headers were included twice.  Fix that.

Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCN314 in DM

Add support for DCN 3.1.4 in Display Manager

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DMUB support for DCN314

Initialize DMUB for DCN 3.1.4.
Use same funcs as DCN31.

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCN314 in DC

Add support for DCN 3.1.4 in Display Core

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 version identifiers

DCN 3.1.4 version and family ids

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 DML calculation support

Display mode library for DCN 3.1.4

v2: squash in checkpatch fix (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 DC resources

Display Core support for DCN 3.1.4

v2:(squash)fix non-x86 in dc/dcn314/Makefile
Properly handle PPC as well. (Alex)
v3: minor cleanup (Alex)
v4: fix comment (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 clock manager

Clock and SMU interfaces for DCN 3.1.4

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 IRQ services

IRQ services to support DCN 3.1.4 interrupts.

v2: make to_dal_irq_source_dcn314 static (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add reg headers for DCN314

Register headers for the following IPs:
- DCN  3.1.4
- DPCS 3.1.4

v2:(squash) clean up (Alex)

Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ensure valid event timestamp for cursor-only commits

Requires enabling the vblank machinery for them.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2030
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Check BO's requested pinning domains against its preferred_domains

When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.

For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.

v2: Allow the kernel to override the domain, which can happen when
    exporting a BO to a V4L camera (for example).

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: attempt to fix the logic in commit_planes_for_stream()

The indentation is screwed up.  I'm not sure quite how the logic
should flow.  Someone more familiar with this code should
verify this.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Implement get GFXOFF status for vangogh

Implement function to get current GFXOFF status for vangogh.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct check of coverage blend mode

Check the value of per_pixel_alpha to decide whether the Coverage pixel
blend mode is applicable or not.

Fixes: 76818cdd11a2 ("drm/amd/display: add Coverage blend mode for overlay plane")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Prevent divide by zero

divide error: 0000 [#1] SMP PTI
CPU: 3 PID: 78925 Comm: tee Not tainted 5.15.50-1-lts #1
Hardware name: MSI MS-7A59/Z270 SLI PLUS (MS-7A59), BIOS 1.90 01/30/2018
RIP: 0010:smu_v11_0_set_fan_speed_rpm+0x11/0x110 [amdgpu]

Speed is user-configurable through a file.
I accidentally set it to zero, and the driver crashed.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Yefim Barashkin <mr.b34r@kolabnow.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.

Various DCE versions had trouble with 36 bpp lb depth, requiring fixes,
last time in commit 353ca0fa5630 ("drm/amd/display: Fix 10bit 4K display
on CIK GPUs") for DCE-8. So far >= DCE-11.2 was considered ok, but now I
found out that on DCE-11.2 it causes dithering when there shouldn't be
any, so identity pixel passthrough with identity gamma LUTs doesn't work
when it should. This breaks various important neuroscience applications,
as reported to me by scientific users of Polaris cards under Ubuntu 22.04
with Linux 5.15, and confirmed by testing it myself on DCE-11.2.

Lets only use depth 36 for DCN engines, where my testing showed that it
is both necessary for high color precision output, e.g., RGBA16 fb's,
and not harmful, as far as more than one year in real-world use showed.

DCE engines seem to work fine for high precision output at 30 bpp, so
this ("famous last words") depth 30 should hopefully fix all known problems
without introducing new ones.

Successfully retested on DCE-11.2 Polaris and DCN-1.0 Raven Ridge on
top of Linux 5.19.0-rc2 + drm-next.

Fixes: 353ca0fa5630 ("drm/amd/display: Fix 10bit 4K display on CIK GPUs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # 5.14.0
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some dc_dmub_srv functions static

Not used outside of dc_dmub_srv.c.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix file permissions on some files

Drop execute.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2085
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix acronym typo in glossary

The initialism of RunList Controller is RLC, not RCL

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.194

This version brings along following fixes:

- Fixes for MST, MPO, PSRSU, DP 2.0, Freesync and others
- Add register offsets of NBI and DCN.
- Improvement of ALPM
- Removing assert statement for Linux DM
- Re-implementing ARGB16161616 pixel format

Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix lag when moving windowed MPO across display using ODM 2:1 combine

[Why]
With single display odm 2:1 policy, when moving windowed MPO across
 the display, we experience a momentary lag when we move between the
 centre of the display and the right half of the display.  This is
 caused by the MPO pipe being reallocated when it crosses this
 boundary

[How]
Handle two cases:
1. if the head pipe has a MPO pipe already allocated in the old
 context, then use that pipe if it is available in the current
 context
2. if the head pipe is on the left side, check the right side to
 see if it has a MPO pipe already allocated.  If so, don't use
 that pipe if it is selected as the idle pipe in the current
 context
Add new function pointer called .acquire_idle_pipe_for_head_pipe
 that will pass in the head pipe and handle case 1
Add find_idle_secondary_pipe_check_mpo() to handle case 2
 if we don't hit case 1.

In dc_add_plane_to_context(), start with head pipe and check
 case 1 and 2 in call acquire_free_pipe_for_head().
If we are on the right side of the display, check case 1
 again by passing in right side pipe as the new head in
 call acquire_free_pipe_for_head().

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NBIO reg offsets to DC

[Why&How]
Add a field to store the NBIO IP offset for use with runtime offset
calculation

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN reg offsets to DC

[Why&How]
Add a field to store the DCN IP offset for use with runtime offset
calculation

This offset is indexed using reg*_BASE_IDX for the corresponding
group of registers. For example, address of DIG_BE_CNTL instance 0 is
calculated like: dcn_reg_offsets[regDIG0_DIG_BE_CNTL_BASE_IDX] +
regDIG0_DIG_BE_CNTL.

{dcn,nbio}_reg_offsets are used only for the ASICs for which runtime
initializaion of offsets are enabled through the modified SR* macros
that contain an additional REG_STRUCT element in the macro definition.

DCN3.5+ will fail dc_create() if {dcn,nbio}_reg_offsets are null. They
are applicable starting with DCN32/321 and are not used for ASICs
upstreamed before them. ASICs before DCN32/321 will not contain any
computation that involves {dcn,nbio}_reg_offsets. For them, the
address/offset computation is done during compile time.

This is evident from the BASE_INNER definition for compile time vs run
time initialization:

Compile time init: #define BASE_INNER(seg) DCN_BASE__INST0_SEG ## seg
Run time init:     #define BASE_INNER(seg) ctx->dcn_reg_offsets[seg]

BASE_INNER macro is local to each dcnxx_resource.c and hence different
ASICs can have either runtime or compile time initialization of offsets.

The computation of offset is done for registers all at once during
driver load and hence it does not introduce any performance overhead
during normal operation.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add system info table log

[why]
insert log for debug use.

v2: squash in fix (Alex)

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Grab dc_lock before detecting link

[Why & How]
There is chance we change dc state while calling dc_link_detect().
As the result of that, grab the dm.dc_lock before detecting link.

Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Re-implementing ARGB16161616 pixel format as 22

[Why]
ABGR16161616 colour format was added to dcn10/20/30, and set
any ARGB16161616 to the same value as it (26). As such, the
HDR10 Green Point y value was too far off of the EDID stated
value for DisplayPort.

[How]
Added back the pixel format as 22 for ARGB16161616 for
dcn10/20/30.

Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.193

Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update DML1 logic for unbounded req handling

[why]
Unbounded request logic in resource/DML has some issues where
unbounded request is being enabled incorrectly.  SW today enables
unbounded request unconditionally in hardware, on the assumption
that HW can always support it in single pipe scenarios.

This worked until now because the same assumption is made in DML.
A new DML update is needed to fix a bug, where there are single
pipe scenarios where unbounded cannot be enabled, and this change
in DML needs to be ported in, and dcn32 resource logic fixed.

[how]
First, dcn32_resource should program unbounded req in HW according
to unbounded req enablement output from DML, as opposed to DML input

Second, port in DML1 update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: add aggregated doorbell support

Port aggregated doorbell support to gfx11.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma6: add aggregated doorbell support

Port aggregated doorbell support to sdma6.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: ring aggregatged doorbell when mes queue is unmapped

Ring aggregated doorbel to make unmapped queue scheduled in mes firmware.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes11: initialize aggregated doorbell

Allocate and enable aggregated doorbell.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: init aggregated doorbell

Allocate and enable aggregated doorbell.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support reset flag set for gpu reset

Move reset_context out of gpu recover function to make it configurable
for different reset purpose.
For the reset way of call gpu_recovery sysfs, force to use full reset
method. Otherwise, try soft reset by default if the related ASIC
supportted, if soft reset failed, will use full reset.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support SDMA soft recovery for sdma v6

Support SDMA soft reset for SDMA v6.

V3: use ib test to check soft reset.
V4: squash in unused variable fix (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable soft reset for gfx 11

Enable soft reset for gfx 11.
V2: enable both gfx v11.0.0 and gfx v11.0.2.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support gfx soft reset for gfx v11

Support GFX soft reset for gfx v11.

V3: use ib test check soft reset.
V4: squash in unused variable fix (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce SCDC Status Flags Definition

[Why]
Status flags definition is reduced to read
less bytes in SCDC transaction for status update.

[How]
Reduce definition of reserved bytes from 3 to 1
for status update.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7

On the GC 10.3.7 platform the initial MEC release version #3 can support
atomic operation,so need correct and set its MEC atomic support version to #3.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make enable link independent from verified link caps

[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.

[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ignore First MST Sideband Message Return Error

[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.

[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.

v2: squash in additional DMI entries
v3: squash in static fix

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'topic/nouveau-misc-2022-07-13-1' of git://anongit.freedesktop.org/drm/drm into drm-next

drm/nouveau next misc

This is a set of misc nouveau patches skeggsb left queued up, just
flushing some of them out.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9txSS9Pdagpi=3JJeFOGy6ALWC31WZdQxLBkfGeL3O+T1A@mail.gmail.com

Merge tag 'exynos-drm-next-for-v5.20' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Two cleanups
- Remove Joonyoung Shim from MAINTAINERS and relevant yaml files.
  He left from Samsung so his email address isn't valid anymore.

Fixup
- Fix resume function issue of exynos decon driver by calling
  clk_disable_unprepare() properly if clk_prepare_enable() failed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712061008.199961-1-inki.dae@samsung.com

drm/nouveau/kms/nv50-: remove unused functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/flcn: remove unused functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: remove double WFI when destroying channels

This is particularly irritating when the channel has hung.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/ce/gv100-: move method buffer to ce ctx

Didn't really know what this buffer was when initially implemented,
but these days we do, so move it somewhere more appropriate.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/fifo: remove rd32/wr32 accessors from channels

No need for these, we always map USERD to the client.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/fifo: rip out cevent, never used

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/device: remove pwrsrc notify in favour of a direct call to clk

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: remove unused header

Left-over from secboot->acr transition.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: zero out engine pointer for subdev-provided classes

Doesn't fix any known issue, but noticed fifo being initialised in
logs in response to mmu allocation.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: use list_add_tail() when building object tree

Fixes resume from hibernate failing on (at least) TU102, where cursor
channel init failed due to being performed before the core channel.

Not solid idea why suspend-to-ram worked, but, presumably HW being in
an entirely clean state has something to do with it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvkm: rip out event uapi

Userspace never ended up using this to be clever about dealing with
channel death, and it won't be, not like this anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvif: add wrapper for open-coded nvif_object_constructed()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-msm-next-2022-07-10' of https://gitlab.freedesktop.org/drm/msm into drm-next

Next for v5.20

GPU:
- a619 support
- Fix for unclocked GMU register access
- Devcore dump enhancements

Core:

- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings

DPU:

- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes

DP:

- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change

MDP5:

- MSM8953 perf data

HDMI:

- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com

Backmerge tag 'v5.19-rc6' of git://git./linux/kernel/git/torvalds/linux into drm-next

Backmerge in rc6 so I can merge msm next easier.

Linux 5.19-rc6

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/amdkfd: bump KFD version for unified ctx save/restore memory

To expose unified memory for ctx save/resotre area feature
availablity to libhsakmt.

Proposed userspace:
https://patchwork.freedesktop.org/series/106218/

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix unnecessary pipe split playing NV12 1080p MPO video

[Why]
When playing NV12 1080p MPO video, it is pipe splitting so
we see two pipes in fullscreen and four pipes in windowed
mode. Pipe split is happening because we are setting
MaximumMPCCombine = 1

[How]
Algorithm for MaximumMPCCombine has extra conditions we do
not need.  Use DCN31 algorithm instead

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix black screen when disabling Freesync in OSD

[Why]
Black screen encountered when disabling Freesync through OSD on some
displays.

[How]
Set the should_disable flag when new top pipe has no plane state to
ensure that pipes get cleaned up.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable PSRSU when DSC enabled on the specific sink

[Why]
Some specific sink is not able to support PSRSU when DSC is turned on.
For this case, fall-back to use PSR1.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear edid when unplug mst connector

[Why]
When unplug one sst monitor from a mst hub and plug in the same
port with another sst monitor, we don't read the corresponding
edid. That's because we detect there is already an edid stored in
aconnector->edid which is a stale one.

[How]
Clean up aconnector->edid when unplug mst connector.

Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix windowed MPO video with ODM combine for DCN32

[Why]
In single display configuration, windowed MPO does not work
 with ODM combine.

[How]
For ODM + MPO window on one half of ODM, only 3 pipes should
 be allocated and scaling parameters adjusted to handle this case.
 Otherwise, we use 4 pipes.
Move copy_surface_update_to_plane() before dc_add_plane_to_context()
 so that it gets the updated rect information when setting up
 the pipes.
Add dc_check_boundary_crossing_for_windowed_mpo_with_odm() to force
 a full update when we cross a boundary requiring us to reconfigure
 the number of pipes between 3 and 4 pipes.
Set config.enable_windowed_mpo_odm to true when we have the
 debug.enable_single_display_2to1_odm_policy set to true.
Don't fail validating ODM with windowed MPO if
 config.enable_windowed_mpo_odm is true.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Removing assert statements for Linux

[WHY]
Assert statements causing several bugs on Linux DM

[HOW]
Removing assert statement for Linux DM
(ASSERT(result == VBIOSSMC_Result_OK)). Also adding
logging statements for setting dcfclk.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216092
Fixes: c1b972a18d05 ("drm/amd/display: Insert pulling smu busy status before sending another request")
Reviewed-by: Gabe Teeger <Gabe.Teeger@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Helper function for ALPM initialization

[WHY]
Needed a helper function for ALPM DPCD initialization

[HOW]
Refactoring to put ALPM initialization in a helper function

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Muhammad Ansari <muansari@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for DP2.0 when checking ODM combine

[WHY]
Certain DP 2.0 modes may fail validation if DP 2.0 is not considered for
ODM combine.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Exit SubVP if MPO in use

[Description]
Exit SubVP if MPO is in use since SubVP + MPO together is not supported.
- Don't add SubVP at validation time if we see MPO is in use

Issues fixed in the SubVP / MPO transition:
1. Enable phantom pipes in post unlock function to prevent underflow
when an active pipe is being transitioned to be a phantom pipe (VTG
updates take place right away). Also must wait for VUPDATE of the main
pipe to complete first

2. Don't wait for MPCC idle when transitioning a phantom pipe to an
actual pipe. MPCC_STATUS is never asserted due to OTG being off for
phantom pipes

3. When transitioning an active pipe to phantom, program DET right away
(same as disabling the pipe) or the DET update will only take when
the phantom pipe is enabled which can cause DET allocation errors.

4. For K1/K2 programming of phantom pipes, use same settings as the
main pipe. Also don't program K1 / K2 = 0xF ever since the field is only
1 / 2 bits wide.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: set correct mes ring ready flag

Set corresponding ready flag for mes ring when enable or disable
mes ring.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>