review.tizen.org Git - platform/kernel/linux-rpi.git/log

mptcp: mptcp_parse_option() fix for MPTCPOPT_MP_JOIN

[ Upstream commit 89e23277f9c16df6f9f9c1a1a07f8f132339c15c ]

mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three
possible cases handled for MPTCPOPT_MP_JOIN option.

OPTIONS_MPTCP_MPJ is the combination of three flags:
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK

This is a problem, because backup, join_id, token, nonce and/or hmac fields
could be left uninitialized in some cases.

Distinguish the three cases, as following patches will need this step.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Properly setup HDMI stream

[ Upstream commit 454abb80e26ab85323a30e52aa7b0ee9aae1d38a ]

Since commit 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if
the stream is not supported") HDMI playback is broken with avs driver.
This happens because for HDMI stream (unlike generic HDA one)
channels_min for stream is not set when creating PCMs. Fix this by
setting the value based on first available converter.

Fixes: 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if the stream is not supported")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240112113349.2905328-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: micrel: populate .soft_reset for KSZ9131

[ Upstream commit e398822c4751017fe401f57409488f5948d12fb5 ]

The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY
is used with the ravb Ethernet driver. It has been discovered that when
bringing the Ethernet interface down/up continuously, e.g., with the
following sh script:

$ while :; do ifconfig eth0 down; ifconfig eth0 up; done

the link speed and duplex are wrong after interrupting the bring down/up
operation even though the Ethernet interface is up. To recover from this
state the following configuration sequence is necessary (executed
manually):

$ ifconfig eth0 down
$ ifconfig eth0 up

The behavior has been identified also on the Microchip SAMA7G5-EK board
which runs the macb driver and uses the same PHY.

The order of PHY-related operations in ravb_open() is as follows:
ravb_open() ->
  ravb_phy_start() ->
    ravb_phy_init() ->
      of_phy_connect() ->
        phy_connect_direct() ->
  phy_attach_direct() ->
    phy_init_hw() ->
      phydev->drv->soft_reset()
      phydev->drv->config_init()
      phydev->drv->config_intr()
    phy_resume()
      kszphy_resume()

The order of PHY-related operations in ravb_close is as follows:
ravb_close() ->
  phy_stop() ->
    phy_suspend() ->
      kszphy_suspend() ->
        genphy_suspend()
  // set BMCR_PDOWN bit in MII_BMCR

In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY
to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet).
Thus, when opening the interface after it has been  previously closed (via
ravb_close()), the phydev->drv->config_init() and
phydev->drv->config_intr() reach the KSZ9131 PHY driver via the
ksz9131_config_init() and kszphy_config_intr() functions.

KSZ9131 specifies that the MII management interface remains operational
during SPD (Software Power-Down), but (according to manual):
- Only access to the standard registers (0 through 31) is supported.
- Access to MMD address spaces other than MMD address space 1 is possible
  if the spd_clock_gate_override bit is set.
- Access to MMD address space 1 is not possible.

The spd_clock_gate_override bit is not used in the KSZ9131 driver.

ksz9131_config_init() configures RGMII delay, pad skews and LEDs by
accessesing MMD registers other than those in address space 1.

The datasheet for the KSZ9131 does not specify what happens if registers
from an unsupported address space are accessed while the PHY is in SPD.

To fix the issue the .soft_reset method has been instantiated for KSZ9131,
too. This resets the PHY to the default state before doing any
configurations to it, thus switching it out of SPD.

Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: micrel: Fix PTP frame parsing for lan8841

[ Upstream commit acd66c2126eb9b5da2d89ae07dbcd73b909c2111 ]

The HW has the capability to check each frame if it is a PTP frame,
which domain it is, which ptp frame type it is, different ip address in
the frame. And if one of these checks fail then the frame is not
timestamp. Most of these checks were disabled except checking the field
minorVersionPTP inside the PTP header. Meaning that once a partner sends
a frame compliant to 8021AS which has minorVersionPTP set to 1, then the
frame was not timestamp because the HW expected by default a value of 0
in minorVersionPTP.
Fix this issue by removing this check so the userspace can decide on this.

Fixes: cafc3662ee3f ("net: micrel: Add PHC support for lan8841")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amt: do not use overwrapped cb area

[ Upstream commit bec161add35b478a7746bf58bcdea6faa19129ef ]

amt driver uses skb->cb for storing tunnel information.
This job is worked before TC layer and then amt driver load tunnel info
from skb->cb after TC layer.
So, its cb area should not be overwrapped with CB area used by TC.
In order to not use cb area used by TC, it skips the biggest cb
structure used by TC, which was qdisc_skb_cb.
But it's not anymore.
Currently, biggest structure of TC's CB is tc_skb_cb.
So, it should skip size of tc_skb_cb instead of qdisc_skb_cb.

Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: am65-cpsw: Fix max mtu to fit ethernet frames

[ Upstream commit 64e47d8afb5ca533b27efc006405e5bcae2c4a7b ]

The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length
of a received frame. This value is written to the register
AM65_CPSW_PORT_REG_RX_MAXLEN.

The maximum MTU configured on the network device should then leave
some room for the ethernet headers and frame check. Otherwise, if
the network interface is configured to its maximum mtu possible,
the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will
get dropped as oversized.

The switch supports ethernet frame sizes between 64 and 2024 bytes
(including VLAN) as stated in the technical reference manual, so
define AM65_CPSW_MAX_PACKET_SIZE with that maximum size.

Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: CN10KB: Fix FIFO length calculation for RPM2

[ Upstream commit a0cb76a770083a22167659e64ba69af6425b1d9b ]

RPM0 and RPM1 on the CN10KB SoC have 8 LMACs each, whereas RPM2
has only 4 LMACs. Similarly, the RPM0 and RPM1 have 256KB FIFO,
whereas RPM2 has 128KB FIFO. This patch fixes an issue with
improper TX credit programming for the RPM2 link.

Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240108073036.8766-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix use of Don't Fragment flag

[ Upstream commit 8722014311e613244f33952354956a82fa4b0472 ]

rxrpc normally has the Don't Fragment flag set on the UDP packets it
transmits, except when it has decided that DATA packets aren't getting
through - in which case it turns it off just for the DATA transmissions.
This can be a problem, however, for RESPONSE packets that convey
authentication and crypto data from the client to the server as ticket may
be larger than can fit in the MTU.

In such a case, rxrpc gets itself into an infinite loop as the sendmsg
returns an error (EMSGSIZE), which causes rxkad_send_response() to return
-EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry,
leading to the I/O thread endlessly attempting to perform the transmission.

Fix this by disabling DF on RESPONSE packets for now. The use of DF and
best data MTU determination needs reconsidering at some point in the
future.

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/1581852.1704813048@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qualcomm: rmnet: fix global oob in rmnet_policy

[ Upstream commit b33fb5b801c6db408b774a68e7c8722796b59ecc ]

The variable rmnet_link_ops assign a *bigger* maxtype which leads to a
global out-of-bounds read when parsing the netlink attributes. See bug
trace below:

==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207

CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x172/0x475 mm/kasan/report.c:395
kasan_report+0xbb/0x1c0 mm/kasan/report.c:495
validate_nla lib/nlattr.c:386 [inline]
__nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
__nla_parse+0x3e/0x50 lib/nlattr.c:697
nla_parse_nested_deprecated include/net/netlink.h:1248 [inline]
__rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594
rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091
netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0x154/0x190 net/socket.c:734
____sys_sendmsg+0x6df/0x840 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fdcf2072359
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359
RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003
RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000
</TASK>

The buggy address belongs to the variable:
rmnet_policy+0x30/0xe0

The buggy address belongs to the physical page:
page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07
ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9
>ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9
^
ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9
ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9

According to the comment of `nla_parse_nested_deprecated`, the maxtype
should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here.

Fixes: 14452ca3b5ce ("net: qualcomm: rmnet: Export mux_id and flags to netlink")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240110061400.3356108-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/pci: fix max size calculation in zpci_memcpy_toio()

[ Upstream commit 80df7d6af7f6d229b34cf237b2cc9024c07111cd ]

The zpci_get_max_write_size() helper is used to determine the maximum
size a PCI store or load can use at a given __iomem address.

For the PCI block store the following restrictions apply:

1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space
2. len must not exceed ZPCI_MAX_WRITE_SIZE
3. len must be a multiple of 8 bytes
4. The src address must be double word (8 byte) aligned
5. The dst address must be double word (8 byte) aligned

Otherwise only a normal PCI store which takes its src value from
a register can be used. For these PCI store restriction 1 still applies.
Similarly 1 also applies to PCI loads.

It turns out zpci_max_write_size() instead implements stricter
conditions which prevents PCI block stores from being used where they
can and should be used. In particular instead of conditions 4 and 5 it
wrongly enforces both dst and src to be size aligned. This indirectly
covers condition 1 but also prevents many legal PCI block stores.

On top of the functional shortcomings the zpci_get_max_write_size() is
misnamed as it is used for both read and write size calculations. Rename
it to zpci_get_max_io_size() and implement the listed conditions
explicitly.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cd24834130ac ("s390/pci: base support")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
[agordeev@linux.ibm.com replaced spaces with tabs]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: sof-common: Add NULL check for normal_link string

[ Upstream commit e3b3ec967a7d93b9010a5af9a2394c8b5c8f31ed ]

It's not granted that all entries of struct sof_conn_stream declare
a `normal_link` (a non-SOF, direct link) string, and this is the case
for SoCs that support only SOF paths (hence do not support both direct
and SOF usecases).

For example, in the case of MT8188 there is no normal_link string in
any of the sof_conn_stream entries and there will be more drivers
doing that in the future.

To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.

Fixes: 0caf1120c583 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240111105226.117603-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: mediatek-gen3: Fix translation window size calculation

[ Upstream commit 9ccc1318cf4bd90601f221268e42c3374703d681 ]

When using the fls() helper, the translation table should be a power of
two; otherwise, the resulting value will not be correct.

For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window
size will be set to 0x2000000 instead of the expected size 0x3e00000.

Fix the translation window by splitting the MMIO space into multiple tables
if its size is not a power of two.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com
Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: keystone: Fix race condition when initializing PHYs

[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ]

The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for two lane operation across two different
Serdes instances, using one lane of each Serdes.

In such a configuration, if the reference clock for one Serdes is
provided by the other Serdes, it results in a race condition. After the
Serdes providing the reference clock is initialized by the PCI driver by
invoking its PHY APIs, it is not guaranteed that this Serdes remains
powered on long enough for the PHY APIs based initialization of the
dependent Serdes. In such cases, the PLL of the dependent Serdes fails
to lock due to the absence of the reference clock from the former Serdes
which has been powered off by the PM Core.

Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.

Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com
Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: Fix the H2C expected PDU len calculation

[ Upstream commit 9a1abc24850eb759e36a2f8869161c3b7254c904 ]

The nvmet_tcp_handle_h2c_data_pdu() function should take into
consideration the possibility that the header digest and/or the data
digests are enabled when calculating the expected PDU length, before
comparing it to the value stored in cmd->pdu_len.

Fixes: efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: trace: avoid memcpy overflow warning

[ Upstream commit a7de1dea76cd6a3707707af4ea2f8bc3cdeaeb11 ]

A previous patch introduced a struct_group() in nvme_common_command to help
stringop fortification figure out the length of the fields, but one function
is not currently using them:

In file included from drivers/nvme/target/core.c:7:
In file included from include/linux/string.h:254:
include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
^

Change this one to use the correct field name to avoid the warning.

Fixes: 5c629dc9609dc ("nvme: use struct group for generic command dwords")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: re-fix tracing strncpy() warning

[ Upstream commit 4ee7ffeb4ce50c80bc4504db6f39b25a2df6bcf4 ]

An earlier patch had tried to address a warning about a string copy with
missing zero termination:

drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]

The new version causes a different warning with some compiler versions, notably
gcc-9 and gcc-10, and also misses the zero padding that was apparently done
intentionally in the original code:

drivers/nvme/target/trace.h:56:2: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

Change it to use strscpy_pad() with the original length, which will give
a properly padded and zero-terminated string as well as avoiding the warning.

Fixes: d86481e924a7 ("nvmet: use min of device_path and disk len")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume

[ Upstream commit be12ad45e15b5ee0e2526a50266ba1d295d26a88 ]

When the optional PRE_COPY support was added to speed up the device
compatibility check, it failed to update the saving/resuming data
pointers based on the fd offset. This results in migration data
corruption and when the device gets started on the destination the
following error is reported in some cases,

[  478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
[  478.913691] arm-smmu-v3 arm-smmu-v3.2.auto:  0x0000310200000010
[  478.919603] arm-smmu-v3 arm-smmu-v3.2.auto:  0x000002088000007f
[  478.925515] arm-smmu-v3 arm-smmu-v3.2.auto:  0x0000000000000000
[  478.931425] arm-smmu-v3 arm-smmu-v3.2.auto:  0x0000000000000000
[  478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found
[  478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found
[  478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2

Fixes: d9a871e4a143 ("hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231120091406.780-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: coldfire-qspi: Remove an erroneous clk_disable_unprepare() from the remove function

[ Upstream commit 17dc11a02d8dacc7e78968daa2a8c16281eb7d1e ]

The commit in Fixes has changed a devm_clk_get()/clk_prepare_enable() into
a devm_clk_get_enabled().
It has updated the error handling path of the probe accordingly, but the
remove has been left unchanged.

Remove now the redundant clk_disable_unprepare() call from the remove
function.

Fixes: a90a987ebe00 ("spi: use devm_clk_get_enabled() in mcfqspi_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/6670aed303e1f7680e0911387606a8ae069e2cef.1704464447.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/port: Fix missing target list lock

[ Upstream commit 5459e186a5c9f412334321cff58d70dcb0e48a04 ]

cxl_port_setup_targets() modifies the ->targets[] array of a switch
decoder. target_list_show() expects to be able to emit a coherent
snapshot of that array by "holding" ->target_lock for read. The
target_lock is held for write during initialization of the ->targets[]
array, but it is not held for write during cxl_port_setup_targets().

The ->target_lock() predates the introduction of @cxl_region_rwsem. That
semaphore protects changes to host-physical-address (HPA) decode which
is precisely what writes to a switch decoder's target list affects.

Replace ->target_lock with @cxl_region_rwsem.

Now the side-effect of snapshotting a unstable view of a decoder's
target list is likely benign so the Fixes: tag is presumptive.

Fixes: 27b3f8d13830 ("cxl/region: Program target lists")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf db-export: Fix missing reference count get in call_path_from_sample()

[ Upstream commit 1e24ce402c97dc3c0ab050593f1d5f6fde524564 ]

The addr_location map and maps fields in the inner loop were missing
calls to map__get()/maps__get(). The subsequent addr_location__exit()
call in each loop puts the map/maps fields causing use-after-free
aborts.

This issue reproduces on at least arm64 and x86_64 with something
simple like `perf record -g ls` followed by `perf script -s script.py`
with the following script:

    perf_db_export_mode = True
    perf_db_export_calls = False
    perf_db_export_callchains = True

    def sample_table(*args):
        print(f'sample_table({args})')

    def call_path_table(*args):
        print(f'call_path_table({args}')

Committer testing:

This test, just introduced by Ian Rogers, now passes, not segfaulting
anymore:

  # perf test "perf script tests"
   95: perf script tests                                               : Ok
  #

Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207140911.3240408-1-ben.gainey@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: apbuart: fix console prompt on qemu

[ Upstream commit c6dcd8050fb7c2efec6946ae9c49bc186b0a7475 ]

When using a leon kernel with qemu there where no console prompt.
The root cause is the handling of the fifo size in the tx part of the
apbuart driver.

The qemu uart driver only have a very rudimentary status handling and do
not report the number of chars queued in the tx fifo in the status register.
So the driver ends up with a fifo size of 1.

In the tx path the fifo size is divided by 2 - resulting in a fifo
size of zero.

The original implementation would always try to send one char, but
after the introduction of uart_port_tx_limited() the fifo size is
respected even for the first char.

There seems to be no good reason to divide the fifo size with two - so
remove this. It looks like something copied from the original amba driver.

With qemu we now have a minimum fifo size of one char, so we show
the prompt.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: d11cc8c3c4b6 ("tty: serial: use uart_port_tx_limited()")
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: <linux-serial@vger.kernel.org>
Cc: <sparclinux@vger.kernel.org>
Link: https://lore.kernel.org/r/20231226121607.GA2622970@ravnborg.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: imx: Correct clock error message in function probe()

[ Upstream commit 3e189470cad27d41a3a9dc02649f965b7ed1c90f ]

Correct the clock error message by changing the clock name.

Fixes: 1e512d45332b ("serial: imx: add error messages when .probe fails")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer

[ Upstream commit 017dbfc05c31284150819890b4cc86a699cbdb71 ]

For Gen1 isoc-in transfer, host still send out unexpected ACK after device
finish the burst with a short packet, this will cause an exception on the
connected device, such as, a usb 4k camera.
It can be fixed by setting rxfifo depth less than 4k bytes, prefer to use
3k here, the side-effect is that may cause performance drop about 10%,
including bulk transfer.

Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20240104061640.7335-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: avoid crash when parsed profile name is empty

[ Upstream commit 55a8210c9e7d21ff2644809699765796d4bfb200 ]

When processing a packed profile in unpack_profile() described like

"profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}"

a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then
passed to aa_splitn_fqname().

aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace.
Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later
aa_alloc_profile() crashes as the new profile name is NULL now.

general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
<TASK>
? strlen+0x1e/0xa0
aa_policy_init+0x1bb/0x230
aa_alloc_profile+0xb1/0x480
unpack_profile+0x3bc/0x4960
aa_unpack+0x309/0x15e0
aa_replace_profiles+0x213/0x33c0
policy_update+0x261/0x370
profile_replace+0x20e/0x2a0
vfs_write+0x2af/0xe00
ksys_write+0x126/0x250
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x1e/0xa0

It seems such behaviour of aa_splitn_fqname() is expected and checked in
other places where it is called (e.g. aa_remove_profiles). Well, there
is an explicit comment "a ns name without a following profile is allowed"
inside.

AFAICS, nothing can prevent unpacked "name" to be in form like
":samba-dcerpcd" - it is passed from userspace.

Deny the whole profile set replacement in such case and inform user with
EPROTO and an explaining message.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 04dc715e24d0 ("apparmor: audit policy ns specified in policy load")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: fix possible memory leak in unpack_trans_table

[ Upstream commit 1342ad786073e96fa813ad943c19f586157ae297 ]

If we fail to unpack the transition table then the table elements which
have been already allocated are not freed on error path.

unreferenced object 0xffff88802539e000 (size 128):
  comm "apparmor_parser", pid 903, jiffies 4294914938 (age 35.085s)
  hex dump (first 32 bytes):
    20 73 6f 6d 65 20 6e 61 73 74 79 20 73 74 72 69   some nasty stri
    6e 67 20 73 6f 6d 65 20 6e 61 73 74 79 20 73 74  ng some nasty st
  backtrace:
    [<ffffffff81ddb312>] __kmem_cache_alloc_node+0x1e2/0x2d0
    [<ffffffff81c47194>] __kmalloc_node_track_caller+0x54/0x170
    [<ffffffff81c225b9>] kmemdup+0x29/0x60
    [<ffffffff83e1ee65>] aa_unpack_strdup+0xe5/0x1b0
    [<ffffffff83e20808>] unpack_pdb+0xeb8/0x2700
    [<ffffffff83e23567>] unpack_profile+0x1507/0x4a30
    [<ffffffff83e27bfa>] aa_unpack+0x36a/0x1560
    [<ffffffff83e194c3>] aa_replace_profiles+0x213/0x33c0
    [<ffffffff83de9461>] policy_update+0x261/0x370
    [<ffffffff83de978e>] profile_replace+0x20e/0x2a0
    [<ffffffff81eac8bf>] vfs_write+0x2af/0xe00
    [<ffffffff81eaddd6>] ksys_write+0x126/0x250
    [<ffffffff88f34fb6>] do_syscall_64+0x46/0xf0
    [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76

Call aa_free_str_table() on error path as was done before the blamed
commit. It implements all necessary checks, frees str_table if it is
available and nullifies the pointers.

Found by Linux Verification Center (linuxtesting.org).

Fixes: a0792e2ceddc ("apparmor: make transition table unpack generic so it can be reused")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/region: fix x9 interleave typo

[ Upstream commit c7ad3dc3649730af483ee1e78be5d0362da25bfe ]

CXL supports x3, x6 and x12 - not x9.

Fixes: 80d10a6cee050 ("cxl/region: Add interleave geometry attributes")
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/169904271254.204936.8580772404462743630.stgit@ubuntu
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Fix hard coded LL miss units

[ Upstream commit f2567e12a090f0eb22553a4468d4c4fe04aad906 ]

Copy-paste error where LL cache misses are reported as l1i.

Fixes: 0a57b910807ad163 ("perf stat: Use counts rather than saved_value")
Suggested-by: Guillaume Endignoux <guillaumee@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231211181242.1721059-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf env: Avoid recursively taking env->bpf_progs.lock

[ Upstream commit 9c51f8788b5d4e9f46afbcf563255cfd355690b3 ]

Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.

Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.

Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix a crash in nvmet_req_complete()

[ Upstream commit 0849a5441358cef02586fb2d60f707c0db195628 ]

in nvmet_tcp_handle_h2c_data_pdu(), if the host sends a data_offset
different from rbytes_done, the driver ends up calling nvmet_req_complete()
passing a status error.
The problem is that at this point cmd->req is not yet initialized,
the kernel will crash after dereferencing a NULL pointer.

Fix the bug by replacing the call to nvmet_req_complete() with
nvmet_tcp_fatal_error().

Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reviewed-by: Keith Busch <kbsuch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length

[ Upstream commit efa56305908ba20de2104f1b8508c6a7401833be ]

If the host sends an H2CData command with an invalid DATAL,
the kernel may crash in nvmet_tcp_build_pdu_iovec().

Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp]
Call trace:
  process_one_work+0x174/0x3c8
  worker_thread+0x2d0/0x3e8
  kthread+0x104/0x110

Fix the bug by raising a fatal error if DATAL isn't coherent
with the packet size.
Also, the PDU length should never exceed the MAXH2CDATA parameter which
has been communicated to the host in nvmet_tcp_handle_icreq().

Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix ref count leak in task_kill

[ Upstream commit 2cb54a19ac7153b9a26a72098c495187f64c2276 ]

apparmor_task_kill was not putting the task_cred reference tc, or the
cred_label reference tc when dealing with a passed in cred, fix this
by using a single fn exit.

Fixes: 90c436a64a6e ("apparmor: pass cred through to audit info.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa: Fix an error handling path in eni_vdpa_probe()

[ Upstream commit c1b9f2c66eed3261db76cccd8a22a9affae8dcbf ]

After a successful vp_legacy_probe() call, vp_legacy_remove() should be
called in the error handling path, as already done in the remove function.

Add the missing call.

Fixes: e85087beedca ("eni_vdpa: add vDPA driver for Alibaba ENI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <a7b0ef1eabd081f1c7c894e9b11de01678e85dee.1666293559.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: Fix null pointer dereference in smb2_probe

[ Upstream commit 88f04bc3e737155e13caddf0ba8ed19db87f0212 ]

devm_kasprintf and devm_kzalloc return a pointer to dynamically
allocated memory which can be NULL upon failure.

Fixes: 8648aeb5d7b7 ("power: supply: add Qualcomm PMI8998 SMB2 Charger driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231124075021.1335289-1-chentao@kylinos.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Don't reserve 0-length IOVA region

[ Upstream commit bb57f6705960bebeb832142ce9abf43220c3eab1 ]

When the bootloader/firmware doesn't setup the framebuffers, their
address and size are 0 in "iommu-addresses" property. If IOVA region is
reserved with 0 length, then it ends up corrupting the IOVA rbtree with
an entry which has pfn_hi < pfn_lo.
If we intend to use display driver in kernel without framebuffer then
it's causing the display IOMMU mappings to fail as entire valid IOVA
space is reserved when address and length are passed as 0.
An ideal solution would be firmware removing the "iommu-addresses"
property and corresponding "memory-region" if display is not present.
But the kernel should be able to handle this by checking for size of
IOVA region and skipping the IOVA reservation if size is 0. Also, add
a warning if firmware is requesting 0-length IOVA region reservation.

Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20231205065656.9544-1-amhetre@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: webcam: Make g_webcam loadable again

[ Upstream commit f1fd91a0924b6bff91ca1287461fb8e3b3b61d92 ]

commit 588b9e85609b ("usb: gadget: uvc: add v4l2 enumeration api calls")
has rendered the precomposed (aka legacy) webcam gadget unloadable.

uvc_alloc() since then has depended on certain config groups being
available in configfs tree related to the UVC function. However, legacy
gadgets do not create anything in configfs, so uvc_alloc() must fail
with -ENOENT no matter what.

This patch mimics the required configfs hierarchy to satisfy the code which
inspects formats and frames found in uvcg_streaming_header.

This has been tested with guvcview on the host side, using vivid as a
source of video stream on the device side and using the userspace program
found at https://gitlab.freedesktop.org/camera/uvc-gadget.git.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Fixes: 588b9e85609b ("usb: gadget: uvc: add v4l2 enumeration api calls")
Link: https://lore.kernel.org/r/20231215131614.29132-1-andrzej.p@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spmi: mtk-pmif: Serialize PMIF status check and command submission

[ Upstream commit f200fff8d019f2754f91f5d715652e3e3fdf3604 ]

Before writing the read or write command to the SPMI arbiter through the
PMIF interface, the current status of the channel is checked to ensure
it is idle. However, since the status only changes from idle when the
command is written, it is possible for two concurrent calls to determine
that the channel is idle and simultaneously send their commands. At this
point the PMIF interface hangs, with the status register no longer being
updated, and thus causing all subsequent operations to time out.

This was observed on the mt8195-cherry-tomato-r2 machine, particularly
after commit 46600ab142f8 ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for
drivers between 5.10 and 5.15") was applied, since then the two MT6315
devices present on the SPMI bus would probe assynchronously and
sometimes (during probe or at a later point) read the bus
simultaneously, breaking the PMIF interface and consequently slowing
down the whole system.

To fix the issue at its root cause, introduce locking around the channel
status check and the command write, so that both become an atomic
operation, preventing race conditions between two (or more) SPMI bus
read/write operations. A spinlock is used since this is a fast bus, as
indicated by the usage of the atomic variant of readl_poll, and
'.fast_io = true' being used in the mt6315 driver, so spinlocks are
already used for the regmap access.

Fixes: b45b3ccef8c0 ("spmi: mediatek: Add support for MT6873/8192")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230724154739.493724-1-nfraprado@collabora.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231206231733.4031901-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: cdc-acm: return correct error code on unsupported break

[ Upstream commit 66aad7d8d3ec5a3a8ec2023841bcec2ded5f65c9 ]

In ACM support for sending breaks to devices is optional.
If a device says that it doenot support sending breaks,
the host must respect that.
Given the number of optional features providing tty operations
for each combination is not practical and errors need to be
returned dynamically if unsupported features are requested.

In case a device does not support break, we want the tty layer
to treat that like it treats drivers that statically cannot
support sending a break. It ignores the inability and does nothing.
This patch uses EOPNOTSUPP to indicate that.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 9e98966c7bb94 ("tty: rework break handling")
Link: https://lore.kernel.org/r/20231207132639.18250-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: use 'if' in send_break() instead of 'goto'

[ Upstream commit 24f2cd019946fc2e88e632d2e24a34c2cc3f2be4 ]

Now, the "jumped-over" code is simple enough to be put inside an 'if'.
Do so to make it 'goto'-less.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230919085156.1578-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: don't check for signal_pending() in send_break()

[ Upstream commit fd99392b643b824813df2edbaebe26a2136d31e6 ]

msleep_interruptible() will check on its own. So no need to do the check
in send_break() before calling the above.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230919085156.1578-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: early return from send_break() on TTY_DRIVER_HARDWARE_BREAK

[ Upstream commit 66619686d187b4a6395316b7f39881e945dce4bc ]

If the driver sets TTY_DRIVER_HARDWARE_BREAK, we leave ops->break_ctl()
to the driver and return from send_break(). But we do it using a local
variable and keep the code flowing through the end of the function.
Instead, do 'return' immediately with the ops->break_ctl()'s return
value.

This way, we don't have to stuff the 'else' branch of the 'if' with the
software break handling. And we can re-indent the function too.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230919085156.1578-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()

[ Upstream commit 327ec5f70609cf00c6f961073c01857555c6a8eb ]

In the error path of pci_epf_mhi_edma_write() function, the DMA data
direction passed (DMA_FROM_DEVICE) doesn't match the actual direction used
for the data transfer. Fix it by passing the correct one (DMA_TO_DEVICE).

Fixes: 7b99aaaddabb ("PCI: epf-mhi: Add eDMA support")
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20231214063328.40657-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: ep: Pass mhi_ep_buf_info struct to read/write APIs

[ Upstream commit b08ded2ef2e98768d5ee5f71da8fe768b1f7774b ]

In the preparation of DMA async support, let's pass the parameters to
read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure.

No functional change.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: ep: Use slab allocator where applicable

[ Upstream commit 62210a26cd4f8ad52683a71c0226dfe85de1144d ]

Use slab allocator for allocating the memory for objects used frequently
and are of fixed size. This reduces the overheard associated with
kmalloc().

Suggested-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231018122812.47261-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: ep: Do not allocate event ring element on stack

[ Upstream commit 987fdb5a43a66764808371b54e6047834170d565 ]

It is possible that the host controller driver would use DMA framework to
write the event ring element. So avoid allocating event ring element on the
stack as DMA cannot work on vmalloc memory.

Cc: stable@vger.kernel.org
Fixes: 961aeb689224 ("bus: mhi: ep: Add support for sending events to the host")
Link: https://lore.kernel.org/r/20230901073502.69385-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf unwind-libunwind: Fix base address for .eh_frame

[ Upstream commit 4fb54994b2360ab5029ee3a959161f6fe6bbb349 ]

The base address of a DSO mapping should start at the start of the file.
Usually DSOs are mapped from the pgoff 0 so it doesn't matter when it
uses the start of the map address.

But generated DSOs for JIT codes doesn't start from the 0 so it should
subtract the offset to calculate the .eh_frame table offsets correctly.

Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf unwind-libdw: Handle JIT-generated DSOs properly

[ Upstream commit c966d23a351a33f8a977fd7efbb6f467132f7383 ]

Usually DSOs are mapped from the beginning of the file, so the base
address of the DSO can be calculated by map->start - map->pgoff.

However, JIT DSOs which are generated by `perf inject -j`, are mapped
only the code segment. This makes unwind-libdw code confusing and
rejects processing unwinds in the JIT DSOs. It should use the map
start address as base for them to fix the confusion.

Fixes: 1fe627da30331024 ("perf unwind: Take pgoff into account when reporting elf to libdwfl")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf genelf: Set ELF program header addresses properly

[ Upstream commit 1af478903fc48c1409a8dd6b698383b62387adf1 ]

The text section starts after the ELF headers so PHDR.p_vaddr and
others should have the correct addresses.

Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lieven Hey <lieven.hey@kdab.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf hisi-ptt: Fix one memory leakage in hisi_ptt_process_auxtrace_event()

[ Upstream commit 1bc479d665bc25a9a4e8168d5b400a47491511f9 ]

ASan complains a memory leakage in hisi_ptt_process_auxtrace_event()
that the data buffer is not freed. Since currently we only support the
raw dump trace mode, the data buffer is used only within this function.
So fix this by freeing the data buffer before going out.

Fixes: 5e91e57e68090c0e ("perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/20231207081635.8427-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf header: Fix one memory leakage in perf_event__fprintf_event_update()

[ Upstream commit 813900d19b923fc1b241c1ce292472f68066092b ]

When dump the raw trace by `perf report -D` ASan reports a memory
leakage in perf_event__fprintf_event_update().

It shows that we allocated a temporary cpumap for dumping the CPUs but
doesn't release it and it's not used elsewhere. Fix this by free the
cpumap after the dumping.

Fixes: c853f9394b7bc189 ("perf tools: Add perf_event__fprintf_event_update function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20231207081635.8427-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: ad9467: fix scale setting

[ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ]

When reading in_voltage_scale we can get something like:

root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146

However, when reading the available options:

root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010

which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.

While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: ad9467: add mutex to struct ad9467_state

[ Upstream commit 737720197be445bb9eec2986101e4a386e019337 ]

When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: ad9467: don't ignore error codes

[ Upstream commit e072e149cfb827e0ab4cafb0547e9658e35393cd ]

Make sure functions that return errors are not ignored.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: ad9467: fix reset gpio handling

[ Upstream commit 76f028539cf360f750efd8cde560edda298e4c6b ]

The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.

While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/sgx: Skip non X86_64 platform

[ Upstream commit 981cf568a8644161c2f15c02278ebc2834b51ba6 ]

When building whole selftests on arm64, rsync gives an erorr about sgx:

rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5]

The root casue is sgx only used on X86_64, and shall be skipped on other
platforms.

Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check,
then the build result will be "Skipping non-existent dir: sgx".

Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/sgx: Include memory clobber for inline asm in test enclave

[ Upstream commit 853a57a43ebdb8c024160c1a0990bae85f4bcc2f ]

Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the
compiler the assembly code accesses to the secinfo struct. This ensures
the compiler treats the asm block as a memory barrier and the write to
secinfo will be visible to ENCLU.

Fixes: 20404a808593 ("selftests/sgx: Add test for EPCM permission changes")
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry

[ Upstream commit b84fc2e0139ba4b23b8039bd7cfd242894fe8f8b ]

Ensure sym_tab and sym_names are zero-initialized and add an early-out
condition in the unlikely (erroneous) case that the enclave ELF file would
not contain a symbol table.

This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2.

Fixes: 33c5aac3bf32 ("selftests/sgx: Test complete changing of page type flow")
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/sgx: Fix uninitialized pointer dereference in error path

[ Upstream commit 79eba8c924f7decfa71ddf187d38cb9f5f2cd7b3 ]

Ensure ctx is zero-initialized, such that the encl_measure function will
not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an
early error during key generation.

Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: imx: fix tx statemachine deadlock

[ Upstream commit 78d60dae9a0c9f09aa3d6477c94047df2fe6f7b0 ]

When using the serial port as RS485 port, the tx statemachine is used to
control the RTS pin to drive the RS485 transceiver TX_EN pin. When the
TTY port is closed in the middle of a transmission (for instance during
userland application crash), imx_uart_shutdown disables the interface
and disables the Transmission Complete interrupt. afer that,
imx_uart_stop_tx bails on an incomplete transmission, to be retriggered
by the TC interrupt. This interrupt is disabled and therefore the tx
statemachine never transitions out of SEND. The statemachine is in
deadlock now, and the TX_EN remains low, making the interface useless.

imx_uart_stop_tx now checks for incomplete transmission AND whether TC
interrupts are enabled before bailing to be retriggered. This makes sure
the state machine handling is reached, and is properly set to
WAIT_AFTER_SEND.

Fixes: cb1a60923609 ("serial: imx: implement rts delaying for rs485")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Eberhard Stoll <eberhard.stoll@gmx.de>
Link: https://lore.kernel.org/r/AM0PR09MB26758F651BC1B742EB45775995B8A@AM0PR09MB2675.eurprd09.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

software node: Let args be NULL in software_node_get_reference_args

[ Upstream commit 1eaea4b3604eb9ca7d9a1e73d88fc121bb4061f5 ]

fwnode_get_property_reference_args() may not be called with args argument
NULL and while OF already supports this. Add the missing NULL check.

The purpose is to be able to count the references.

Fixes: b06184acf751 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231109101010.1329587-3-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

acpi: property: Let args be NULL in __acpi_node_get_property_reference

[ Upstream commit bef52aa0f3de1b7d8c258c13b16e577361dabf3a ]

fwnode_get_property_reference_args() may not be called with args argument
NULL on ACPI, OF already supports this. Add the missing NULL checks and
document this.

The purpose is to be able to count the references.

Fixes: 977d5ad39f3e ("ACPI: Convert ACPI reference args to generic fwnode reference args")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231109101010.1329587-2-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

base/node.c: initialize the accessor list before registering

[ Upstream commit 48b5928e18dc27e05cab3dc4c78cd8a15baaf1e5 ]

The current code registers the node as available in the node array
before initializing the accessor list. This makes it so that
anything which might access the accessor list as a result of
allocations will cause an undefined memory access.

In one example, an extension to access hmat data during interleave
caused this undefined access as a result of a bulk allocation
that occurs during node initialization but before the accessor
list is initialized.

Initialize the accessor list before making the node generally
available to the global system.

Fixes: 08d9dbe72b1f ("node: Link memory nodes to their compute nodes")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20231030044239.971756-1-gregory.price@memverge.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Exit perf stat if parse groups fails

[ Upstream commit 0713ab3bd169da82c35eefd012b07b715e4ebcf7 ]

Metrics were added by a callback but commit a4b8cfcabb1d90ec ("perf
stat: Delay metric parsing") postponed this to allow optimizations based
on the CPU configuration.

In doing so it stopped errors in metric parsing from causing 'perf stat'
termination.

This change adds the termination for bad metric names back in.

Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZXByT1K6enTh2EHT@kernel.org/
Link: https://lore.kernel.org/r/20231206183533.972028-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf mem: Fix error on hybrid related to availability of mem event in a PMU

[ Upstream commit a4320085a6c694326dd8db46f563d52d1a826f07 ]

The below error can be triggered on a hybrid machine.

$ perf mem record -t load sleep 1
event syntax error: 'breakpoint/mem-loads,ldlat=30/P'
\___ Bad event or PMU

Unable to find PMU or event on a PMU of 'breakpoint'

In the perf_mem_events__record_args(), the current perf never checks the
availability of a mem event on a given PMU. All the PMUs will be added
to the perf mem event list. Perf errors out for the unsupported PMU.

Extend perf_mem_event__supported() and take a PMU into account. Check
the mem event for each PMU before adding it to the perf mem event list.

Optimize the perf_mem_events__init() a little bit. The function is to
check whether the mem events are supported in the system. It doesn't
need to scan all PMUs. Just return with the first supported PMU is good
enough.

Fixes: 5752c20f3787c9bc ("perf mem: Scan all PMUs instead of just core ones")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231128203940.3964287-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events arm64 AmpereOne: Rename BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT

[ Upstream commit 10a149e4b4a9187940adbfff0f216ccb5a15aa41 ]

The documentation wrongly called the event as BPU_FLUSH_MEM_FAULT and now
has been fixed. Correct the name in the perf tool as well.

Fixes: a9650b7f6fc09d16 ("perf vendor events arm64: Add AmpereOne core PMU events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231201021550.1109196-3-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pds: Fix calculations in pds_vfio_dirty_sync

[ Upstream commit 4004497cec3093d7b0087bc70709b45969fa07b6 ]

The incorrect check is being done for comparing the
iova/length being requested to sync. This can cause
the dirty sync operation to fail. Fix this by making
sure the iova offset added to the requested sync
length doesn't exceed the region_size.

Also, the region_start is assumed to always be at 0.
This can cause dirty tracking to fail because the
device/driver bitmap offset always starts at 0,
however, the region_start/iova may not. Fix this by
determining the iova offset from region_start to
determine the bitmap offset.

Fixes: f232836a9152 ("vfio/pds: Add support for dirty page tracking")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231117001207.2793-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test record user-regs: Fix mask for vg register

[ Upstream commit 28b01743ca752cea5ab182297d8b912b22f2a2d1 ]

The 'vg' register for arm64 shows up in --user_regs as available when
masking the variable AT_HWCAP with 1 << 22 returns '1' as done in
perf_regs.c.

However, in subtests for support of SVE, the check for the 'vg' register
is done by masking the variable AT_HWCAP with the value 0x200000 which
is equals to 1 << 21 instead of 1 << 22.

This results in inconsistencies on certain systems where the test
expects that the 'vg' register is not operational when it is, and
vice-versa.

During the testing on a machine that the test expected not to have the
'vg' register available, 'perf record' with the option --user-regs
showed records for the 'vg' register together with all of the others,
which means that the mask for the subtest of perf_event_attr is off by
one.

Change the value of the mask from 0x200000 to 0x400000 to correct it.

Fixes: 9440ebdc333dd12e ("perf test arm64: Add attr tests for new VG register")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20231201194617.13012-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libapi: Add missing linux/types.h header to get the __u64 type on io.h

[ Upstream commit af76b2dec0984a079d8497bfa37d29a9b55932e1 ]

There are functions using __u64, so we need to have the linux/types.h
header otherwise we'll break when its not included before api/io.h.

Fixes: e95770af4c4a280f ("tools api: Add a lightweight buffered reading api")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZWjDPL+IzPPsuC3X@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf header: Fix segfault on build_mem_topology() error path

[ Upstream commit 70df07838fc1c0acfab3325ae79014e241a88bdf ]

Do not increase the node count unless a node has been successfully read,
because it can lead to a segfault if an error occurs.

For example, if perf exceeds the open file limit in memory_node__read(),
which, on a test system, could be made to happen by setting the file limit
to exactly 32:

Before:

  $ ulimit -n 32
  $ perf mem record --all-user -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  failed: can't open memory sysfs data
  perf: Segmentation fault
  Obtained 14 stack frames.
  perf(sighandler_dump_stack+0x48) [0x55f4b1f59558]
  /lib/x86_64-linux-gnu/libc.so.6(+0x42520) [0x7f4ba1c42520]
  /lib/x86_64-linux-gnu/libc.so.6(free+0x1e) [0x7f4ba1ca53fe]
  perf(+0x178ff4) [0x55f4b1f48ff4]
  perf(+0x179a70) [0x55f4b1f49a70]
  perf(+0x17ef5d) [0x55f4b1f4ef5d]
  perf(+0x85c0b) [0x55f4b1e55c0b]
  perf(cmd_record+0xe1d) [0x55f4b1e5920d]
  perf(cmd_mem+0xc96) [0x55f4b1e80e56]
  perf(+0x130460) [0x55f4b1f00460]
  perf(main+0x689) [0x55f4b1e427d9]
  /lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f4ba1c29d90]
  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f4ba1c29e40]
  perf(_start+0x25) [0x55f4b1e42a25]
  Segmentation fault (core dumped)
  $

After:

  $ ulimit -n 32
  $ perf mem record --all-user -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  failed: can't open memory sysfs data
  [ perf record: Captured and wrote 0.005 MB perf.data (11 samples) ]
  $

Fixes: f8e502b9d1b3b197 ("perf header: Ensure bitmaps are freed")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Remove atomics from test_loop to avoid test failures

[ Upstream commit 72b4ca7e993e94f09bcf6d19fc385a2e8060c71f ]

The current use of atomics can lead to test failures, as tests (such as
tests/shell/record.sh) search for samples with "test_loop" as the
top-most stack frame, but find frames related to the atomic operation
(e.g. __aarch64_ldadd4_relax).

This change simply removes the "count" variable, as it is not necessary.

Fixes: 1962ab6f6e0b39e4 ("perf test workload thloop: Make count increments atomic")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Nick Forrington <nick.forrington@arm.com>
Acked-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231102162225.50028-1-nick.forrington@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Map reserved memory as cacheable if device is coherent

[ Upstream commit f1aad9df93f39267e890836a28d22511f23474e1 ]

Check if the device is marked as DMA coherent in the DT and if so,
map its reserved memory as cacheable in the IOMMU.
This fixes the recently added IOMMU reserved memory support which
uses IOMMU_RESV_DIRECT without properly building the PROT for the
mapping.

Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230926152600.8749-1-laurentiu.tudor@nxp.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed

[ Upstream commit ad90d0358bd3b4554f243a425168fc7cebe7d04e ]

Returning an error code from .remove() makes the driver core emit the
little helpful error message:

remove callback returned a non-zero value. This will be ignored.

and then remove the device anyhow. So all resources that were not freed
are leaked in this case. Skipping serial8250_unregister_port() has the
potential to keep enough of the UART around to trigger a use-after-free.

So replace the error return (and with it the little helpful error
message) by a more useful error message and continue to cleanup.

Fixes: e3f0c638f428 ("serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231110152927.70601-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Avoid potential out-of-bounds read in pci_dev_for_each_resource()

[ Upstream commit 3171e46d677a668eed3086da78671f1e4f5b8405 ]

Coverity complains that pointer in the pci_dev_for_each_resource() may be
wrong, i.e., might be used for the out-of-bounds read.

There is no actual issue right now because we have another check afterwards
and the out-of-bounds read is not being performed. In any case it's better
code with this fixed, hence the proposed change.

As Jonas pointed out "It probably makes the code slightly less performant
as res will now be checked for being not NULL (which will always be true),
but I doubt it will be significant (or in any hot paths)."

Fixes: 09cc90063240 ("PCI: Introduce pci_dev_for_each_resource()")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/r/20230509182122.GA1259567@bhelgaas
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20231030114218.2752236-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq256xx: fix some problem in bq256xx_hw_init

[ Upstream commit b55d073e6501dc6077edaa945a6dad8ac5c8bbab ]

smatch complains that there is a buffer overflow and clang complains
'ret' is never read.

Smatch error:
drivers/power/supply/bq256xx_charger.c:1578 bq256xx_hw_init() error:
buffer overflow 'bq256xx_watchdog_time' 4 <= 4

Clang static checker:
Value stored to 'ret' is never read.

Add check for buffer overflow and error code from regmap_update_bits().

Fixes: 32e4978bb920 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231116041822.1378758-1-suhui@nfschina.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cw2015: correct time_to_empty units in sysfs

[ Upstream commit f37669119423ca852ca855b24732f25c0737aa57 ]

RRT_ALRT register holds remaining battery time in minutes therefore it
needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs
expressed in seconds

Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Jan Palus <jpalus@fastmail.com>
Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()

[ Upstream commit 3c1e5abcda64bed0c7bffa65af2316995f269a61 ]

When calling spi_register_board_info(),

Fixes: f869d42e580f ("MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()

[ Upstream commit 89c4b588d11e9acf01d604de4b0c715884f59213 ]

When calling spi_register_board_info(), we should pass the number of
elements in 'db1200_spi_devs', not 'db1200_i2c_devs'.

Fixes: 63323ec54a7e ("MIPS: Alchemy: Extended DB1200 board support.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro

[ Upstream commit 5daa3726410288075ba73c336bb2e80d6b06aa4d ]

During the refactoring, a bug was introduced in the rarly used
XIP_FIXUP_FLASH_OFFSET macro.

Fixes: bee7fbc38579 ("RISC-V CPU Idle Support")
Fixes: e7681beba992 ("RISC-V: Split out the XIP fixups into their own file")
Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-3-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC

[ Upstream commit b8b2711336f03ece539de61479d6ffc44fb603d3 ]

When resetting the linear mapping permissions, we must make sure that we
clear the X bit so that do not end up with WX mappings (since we set
PAGE_KERNEL).

Fixes: 395a21ff859c ("riscv: add ARCH_HAS_SET_DIRECT_MAP support")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231213134027.155327-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings

[ Upstream commit 311cd2f6e25380cff0abc2884dc6a3d33bc9b5c3 ]

When STRICT_KERNEL_RWX is set, any change of permissions on any kernel
mapping (vmalloc/modules/kernel text...etc) should be applied on its
linear mapping alias. The problem is that the riscv kernel uses huge
mappings for the linear mapping and walk_page_range_novma() does not
split those huge mappings.

So this patchset implements such split in order to apply fine-grained
permissions on the linear mapping.

Below is the difference before and after (the first PUD mapping is split
into PTE/PMD mappings):

Before:

---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000    0x0000000080080000      1536K PTE     D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000    0x0000000080200000      1914M PMD     D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000    0x00000000f7c00000        12M PMD     D A G . . . R V
0xffffaf8078800000-0xffffaf8078c00000    0x00000000f8800000         4M PMD     D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000    0x00000000f8c00000         6M PMD     D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000    0x00000000f9200000        84M PMD     D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000    0x00000000fe600000      1112K PTE     D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000    0x00000000fe717000        12K PTE     D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000    0x00000000fe71d000         4K PTE     D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000    0x00000000fe722000       888K PTE     D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000    0x00000000fe800000        22M PMD     D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000    0x00000000ffe00000      1360K PTE     D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000    0x00000000fff55000       684K PTE     D A G . . W R V
0xffffaf8080000000-0xffffaf8400000000    0x0000000100000000        14G PUD     D A G . . W R V

After:

---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000    0x0000000080080000      1536K PTE     D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000    0x0000000080200000      1914M PMD     D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000    0x00000000f7c00000        12M PMD     D A G . . . R V
0xffffaf8078800000-0xffffaf8078a00000    0x00000000f8800000         2M PMD     D A G . . W R V
0xffffaf8078a00000-0xffffaf8078c00000    0x00000000f8a00000         2M PTE     D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000    0x00000000f8c00000         6M PMD     D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000    0x00000000f9200000        84M PMD     D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000    0x00000000fe600000      1112K PTE     D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000    0x00000000fe717000        12K PTE     D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000    0x00000000fe71d000         4K PTE     D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000    0x00000000fe722000       888K PTE     D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000    0x00000000fe800000        22M PMD     D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000    0x00000000ffe00000      1360K PTE     D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000    0x00000000fff55000       684K PTE     D A G . . W R V
0xffffaf8080000000-0xffffaf8080800000    0x0000000100000000         8M PMD     D A G . . W R V
0xffffaf8080800000-0xffffaf8080af6000    0x0000000100800000      3032K PTE     D A G . . W R V
0xffffaf8080af6000-0xffffaf8080af8000    0x0000000100af6000         8K PTE     D A G . X . R V
0xffffaf8080af8000-0xffffaf8080c00000    0x0000000100af8000      1056K PTE     D A G . . W R V
0xffffaf8080c00000-0xffffaf8081a00000    0x0000000100c00000        14M PMD     D A G . . W R V
0xffffaf8081a00000-0xffffaf8081a40000    0x0000000101a00000       256K PTE     D A G . . W R V
0xffffaf8081a40000-0xffffaf8081a44000    0x0000000101a40000        16K PTE     D A G . X . R V
0xffffaf8081a44000-0xffffaf8081a52000    0x0000000101a44000        56K PTE     D A G . . W R V
0xffffaf8081a52000-0xffffaf8081a54000    0x0000000101a52000         8K PTE     D A G . X . R V
...
0xffffaf809e800000-0xffffaf80c0000000    0x000000011e800000       536M PMD     D A G . . W R V
0xffffaf80c0000000-0xffffaf8400000000    0x0000000140000000        13G PUD     D A G . . W R V

Note that this also fixes memfd_secret() syscall which uses
set_direct_map_invalid_noflush() and set_direct_map_default_noflush() to
remove the pages from the linear mapping. Below is the kernel page table
while a memfd_secret() syscall is running, you can see all the !valid
page table entries in the linear mapping:

...
0xffffaf8082240000-0xffffaf8082241000    0x0000000102240000         4K PTE     D A G . . W R .
0xffffaf8082241000-0xffffaf8082250000    0x0000000102241000        60K PTE     D A G . . W R V
0xffffaf8082250000-0xffffaf8082252000    0x0000000102250000         8K PTE     D A G . . W R .
0xffffaf8082252000-0xffffaf8082256000    0x0000000102252000        16K PTE     D A G . . W R V
0xffffaf8082256000-0xffffaf8082257000    0x0000000102256000         4K PTE     D A G . . W R .
0xffffaf8082257000-0xffffaf8082258000    0x0000000102257000         4K PTE     D A G . . W R V
0xffffaf8082258000-0xffffaf8082259000    0x0000000102258000         4K PTE     D A G . . W R .
0xffffaf8082259000-0xffffaf808225a000    0x0000000102259000         4K PTE     D A G . . W R V
0xffffaf808225a000-0xffffaf808225c000    0x000000010225a000         8K PTE     D A G . . W R .
0xffffaf808225c000-0xffffaf8082266000    0x000000010225c000        40K PTE     D A G . . W R V
0xffffaf8082266000-0xffffaf8082268000    0x0000000102266000         8K PTE     D A G . . W R .
0xffffaf8082268000-0xffffaf8082284000    0x0000000102268000       112K PTE     D A G . . W R V
0xffffaf8082284000-0xffffaf8082288000    0x0000000102284000        16K PTE     D A G . . W R .
0xffffaf8082288000-0xffffaf808229c000    0x0000000102288000        80K PTE     D A G . . W R V
0xffffaf808229c000-0xffffaf80822a0000    0x000000010229c000        16K PTE     D A G . . W R .
0xffffaf80822a0000-0xffffaf80822a5000    0x00000001022a0000        20K PTE     D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000    0x00000001022a5000         4K PTE     D A G . . . R V
0xffffaf80822a6000-0xffffaf80822ab000    0x00000001022a6000        20K PTE     D A G . . W R V
...

And when the memfd_secret() fd is released, the linear mapping is
correctly reset:

...
0xffffaf8082240000-0xffffaf80822a5000    0x0000000102240000       404K PTE     D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000    0x00000001022a5000         4K PTE     D A G . . . R V
0xffffaf80822a6000-0xffffaf80822af000    0x00000001022a6000        36K PTE     D A G . . W R V
...

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: b8b2711336f0 ("riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC")
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix module_alloc() that did not reset the linear mapping permissions

[ Upstream commit 749b94b08005929bbc636df21a23322733166e35 ]

After unloading a module, we must reset the linear mapping permissions,
see the example below:

Before unloading a module:

0xffffaf809d65d000-0xffffaf809d6dc000    0x000000011d65d000       508K PTE .   ..     ..   D A G . . W R V
0xffffaf809d6dc000-0xffffaf809d6dd000    0x000000011d6dc000         4K PTE .   ..     ..   D A G . . . R V
0xffffaf809d6dd000-0xffffaf809d6e1000    0x000000011d6dd000        16K PTE .   ..     ..   D A G . . W R V
0xffffaf809d6e1000-0xffffaf809d6e7000    0x000000011d6e1000        24K PTE .   ..     ..   D A G . X . R V

After unloading a module:

0xffffaf809d65d000-0xffffaf809d6e1000    0x000000011d65d000       528K PTE .   ..     ..   D A G . . W R V
0xffffaf809d6e1000-0xffffaf809d6e7000    0x000000011d6e1000        24K PTE .   ..     ..   D A G . X W R V

The last mapping is not reset and we end up with WX mappings in the linear
mapping.

So add VM_FLUSH_RESET_PERMS to our module_alloc() definition.

Fixes: 0cff8bff7af8 ("riscv: avoid the PIC offset of static percpu data in module beyond 2G limits")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231213134027.155327-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Check if the code to patch lies in the exit section

[ Upstream commit 420370f3ae3d3b883813fd3051a38805160b2b9f ]

Otherwise we fall through to vmalloc_to_page() which panics since the
address does not lie in the vmalloc region.

Fixes: 043cb41a85de ("riscv: introduce interfaces to patch kernel code")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231214091926.203439-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: virt-pci: fix platform map offset

[ Upstream commit 32253f00ac8a8073bf6db4bfe9d6511cc93c4aef ]

The offset is currently always zero so the backend can't distinguish
between accesses to different ioremapped areas.

Fixes: 522c532c4fe7 ("virt-pci: add platform bus support")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: Fix incorrect max_low_pfn adjustment

[ Upstream commit 0f5cc249ff73552d3bd864e62f85841dafaa107d ]

max_low_pfn variable is incorrectly adjusted if the kernel is built with
high memory support and the later is detected in a running system, so the
memory which actually can be directly mapped is getting into the highmem
zone. See the ZONE_NORMAL range on my MIPS32r5 system:

> Zone ranges:
>   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
>   Normal   [mem 0x0000000001000000-0x0000000007ffffff]
>   HighMem  [mem 0x0000000008000000-0x000000020fffffff]

while the zones are supposed to look as follows:

> Zone ranges:
>   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
>   Normal   [mem 0x0000000001000000-0x000000001fffffff]
>   HighMem  [mem 0x0000000020000000-0x000000020fffffff]

Even though the physical memory within the range [0x08000000;0x20000000]
belongs to MMIO on our system, we don't really want it to be considered as
high memory since on MIPS32 that range still can be directly mapped.

Note there might be other problems caused by the max_low_pfn variable
misconfiguration. For instance high_memory variable is initialize with
virtual address corresponding to the max_low_pfn PFN, and by design it
must define the upper bound on direct map memory, then end of the normal
zone. That in its turn potentially may cause problems in accessing the
memory by means of the /dev/mem and /dev/kmem devices.

Let's fix the discovered misconfiguration then. It turns out the commit
a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") didn't introduce the
max_low_pfn adjustment quite correct. If the kernel is built with high
memory support and the system is equipped with high memory, the
max_low_pfn variable will need to be initialized with PFN of the most
upper directly reachable memory address so the zone normal would be
correctly setup. On MIPS that PFN corresponds to PFN_DOWN(HIGHMEM_START).
If the system is built with no high memory support and one is detected in
the running system, we'll just need to adjust the max_pfn variable to
discard the found high memory from the system and leave the max_low_pfn as
is, since the later will be less than PFN_DOWN(HIGHMEM_START) anyway by
design of the for_each_memblock() loop performed a bit early in the
bootmem_init() method.

Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: dmi: Fix early remap on MIPS32

[ Upstream commit 0d0a3748a2cb38f9da1f08d357688ebd982eb788 ]

dmi_early_remap() has been defined as ioremap_cache() which on MIPS32 gets
to be converted to the VM-based mapping. DMI early remapping is performed
at the setup_arch() stage with no VM available. So calling the
dmi_early_remap() for MIPS32 causes the system to crash at the early boot
time. Fix that by converting dmi_early_remap() to the uncached remapping
which is always available on both 32 and 64-bits MIPS systems.

Note this change shall not cause any regressions on the current DMI
support implementation because on the early boot-up stage neither MIPS32
nor MIPS64 has the cacheable ioremapping support anyway.

Fixes: be8fa1cb444c ("MIPS: Add support for Desktop Management Interface (DMI)")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

srcu: Use try-lock lockdep annotation for NMI-safe access.

[ Upstream commit 3c6b0c1c28184038d90dffe8eb542bedcb8ccf98 ]

It is claimed that srcu_read_lock_nmisafe() NMI-safe. However it
triggers a lockdep if used from NMI because lockdep expects a deadlock
since nothing disables NMIs while the lock is acquired.

This is because commit f0f44752f5f61 ("rcu: Annotate SRCU's update-side
lockdep dependencies") annotates synchronize_srcu() as a write lock
usage. This helps to detect a deadlocks such as
srcu_read_lock();
synchronize_srcu();
srcu_read_unlock();

The side effect is that the lock srcu_struct now has a USED usage in normal
contexts, so it conflicts with a USED_READ usage in NMI. But this shouldn't
cause a real deadlock because the write lock usage from synchronize_srcu()
is a fake one and only used for read/write deadlock detection.

Use a try-lock annotation for srcu_read_lock_nmisafe() to avoid lockdep
complains if used from NMI.

Fixes: f0f44752f5f6 ("rcu: Annotate SRCU's update-side lockdep dependencies")
Link: https://lore.kernel.org/r/20230927160231.XRCDDSK4@linutronix.de
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Fix the fractional clock divider flags

[ Upstream commit 03d790f04fb2507173913cad9c213272ac983a60 ]

The conversion to CLK_FRAC_DIVIDER_POWER_OF_TWO_PS uses wrong flags
in the parameters and hence miscalculates the values in the clock
divider. Fix this by applying the flag to the proper parameter.

Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Alex Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20231211111441.3910083-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: tps6594: Add null pointer check to tps6594_device_init()

[ Upstream commit 825906f2ebe83977d747d8bce61675dddd72485d ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Fixes: 325bec7157b3 ("mfd: tps6594: Add driver for TI TPS6594 PMIC")
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231208033320.49345-1-chentao@kylinos.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: aw200xx: Fix write to DIM parameter

[ Upstream commit adfd4621b78d0c02da91335da2b9ad847cb7b39e ]

If write only DIM value to the page 4, LED brightness will not be
updated, as both DIM and FADE need to be written to the page 4.
Therefore, write DIM to the page 1.

Fixes: 36a87f371b7a ("leds: Add AW20xx driver")
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231125200519.1750-2-ddrokosov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: aw2013: Select missing dependency REGMAP_I2C

[ Upstream commit 75469bb0537ad2ab0fc1fb6e534a79cfc03f3b3f ]

The AW2013 driver uses devm_regmap_init_i2c, so REGMAP_I2C needs to
be selected.

Otherwise build process may fail with:
ld: drivers/leds/leds-aw2013.o: in function `aw2013_probe':
leds-aw2013.c:345: undefined reference to `__devm_regmap_init_i2c'

Signed-off-by: Dang Huynh <danct12@riseup.net>
Acked-by: Nikita Travkin <nikita@trvn.ru>
Fixes: 59ea3c9faf32 ("leds: add aw2013 driver")
Link: https://lore.kernel.org/r/20231103114203.1108922-1-danct12@riseup.net
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: syscon: Fix null pointer dereference in of_syscon_register()

[ Upstream commit 41673c66b3d0c09915698fec5c13b24336f18dd1 ]

kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Fixes: e15d7f2b81d2 ("mfd: syscon: Use a unique name with regmap_config")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231204092443.2462115-1-chentao@kylinos.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: cs42l43: Correct SoundWire port list

[ Upstream commit 47b1b03dc56ebc302620ce43e967aa8f33516f6f ]

Two ports are missing from the port list, and the wrong port is set
to 4 channels. Also the attempt to list them by function is rather
misguided, there is nothing in the hardware that fixes a particular
port to one function. Factor out the port properties to an actual
struct, fixing the missing ports and correcting the port set to 4
channels.

Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231130115712.669180-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: rk8xx: fixup devices registration with PLATFORM_DEVID_AUTO

[ Upstream commit 4aedcd4aa61d536ca17e67ecd5bc5d42529164f4 ]

Since commit 210f418f8ace ("mfd: rk8xx: Add rk806 support"), devices are
registered with "0" as id, causing devices to not have an automatic device id
and prevents having multiple RK8xx PMICs on the same system.

Properly pass PLATFORM_DEVID_AUTO to devm_mfd_add_devices() and since
it will ignore the cells .id with this special value, also cleanup
by removing all now ignored cells .id values.

Now we have the same behaviour as before rk806 introduction and rk806
retains the intended behavior.

This fixes a regression while booting the Odroid Go Ultra on v6.6.1:
sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'
CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
Hardware name: Hardkernel ODROID-GO-Ultra (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x9c/0x11c
show_stack+0x18/0x24
dump_stack_lvl+0x78/0xc4
dump_stack+0x18/0x24
sysfs_warn_dup+0x64/0x80
sysfs_do_create_link_sd+0xf0/0xf8
sysfs_create_link+0x20/0x40
bus_add_device+0x114/0x160
device_add+0x3f0/0x7cc
platform_device_add+0x180/0x270
mfd_add_device+0x390/0x4a8
devm_mfd_add_devices+0xb0/0x150
rk8xx_probe+0x26c/0x410
rk8xx_i2c_probe+0x64/0x98
i2c_device_probe+0x104/0x2e8
really_probe+0x184/0x3c8
__driver_probe_device+0x7c/0x16c
driver_probe_device+0x3c/0x10c
__device_attach_driver+0xbc/0x158
bus_for_each_drv+0x80/0xdc
__device_attach+0x9c/0x1ac
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0xa0/0xf4
process_one_work+0x1bc/0x378
worker_thread+0x1dc/0x3d4
kthread+0x104/0x118
ret_from_fork+0x10/0x20
rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
rk8xx-i2c: probe of 0-001c failed with error -17

Fixes: 210f418f8ace ("mfd: rk8xx: Add rk806 support")
Reported-by: Adam Green <greena88@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231116-topic-amlogic-upstream-fix-rk8xx-devid-auto-v2-1-3f1bad68ab9d@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9330/1: davinci: also select PINCTRL

[ Upstream commit f54e8634d1366926c807e2af6125b33cff555fa7 ]

kconfig warns when PINCTRL_SINGLE is selected but PINCTRL is not
set, so also set PINCTRL for ARCH_DAVINCI. This prevents a
kconfig/build warning:

   WARNING: unmet direct dependencies detected for PINCTRL_SINGLE
     Depends on [n]: PINCTRL [=n] && OF [=y] && HAS_IOMEM [=y]
     Selected by [y]:
     - ARCH_DAVINCI [=y] && ARCH_MULTI_V5 [=y]

Closes: lore.kernel.org/r/202311070548.0f6XfBrh-lkp@intel.com
Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sc16is7xx: set safe default SPI clock frequency

commit 3ef79cd1412236d884ab0c46b4d1921380807b48 upstream.

15 MHz is supported only by 76x variants.

If the SPI clock frequency is not specified, use a safe default clock value
of 4 MHz that is supported by all variants.

Also use HZ_PER_MHZ macro to improve readability.

Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: add check for unsupported SPI modes during probe

commit 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 upstream.

The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.

Extract from datasheet:
    The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
    speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
    SC16IS752... In all other aspects, the SC16IS762 is functionally and
    electrically the same as the SC16IS752.

The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.

For all variants, only SPI mode 0 is supported.

Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.

Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Correct behavior when processing some confidence == false touches

commit 502296030ec6b0329e00f9fb15018e170cc63037 upstream.

There appear to be a few different ways that Wacom devices can deal with
confidence:

  1. If the device looses confidence in a touch, it will first clear
     the tipswitch flag in one report, and then clear the confidence
     flag in a second report. This behavior is used by e.g. DTH-2452.

  2. If the device looses confidence in a touch, it will clear both
     the tipswitch and confidence flags within the same report. This
     behavior is used by some AES devices.

  3. If the device looses confidence in a touch, it will clear *only*
     the confidence bit. The tipswitch bit will remain set so long as
     the touch is tracked. This behavior may be used in future devices.

The driver does not currently handle situation 3 properly. Touches that
loose confidence will remain "in prox" and essentially frozen in place
until the tipswitch bit is finally cleared. Not only does this result
in userspace seeing a stuck touch, but it also prevents pen arbitration
from working properly (the pen won't send events until all touches are
up, but we don't currently process events from non-confident touches).

This commit centralizes the checking of the confidence bit in the
wacom_wac_finger_slot() function and has 'prox' depend on it. In the
case where situation 3 is encountered, the treat the touch as though
it was removed, allowing both userspace and the pen arbitration to
act normally.

Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: sensor-hub: Enable hid core report processing for all devices

commit 8e2f79f41a5d1b1a4a53ec524eb7609ca89f3c65 upstream.

After the commit 666cf30a589a ("HID: sensor-hub: Allow multi-function
sensor devices") hub devices are claimed by hidraw driver in hid_connect().
This causes stoppping of processing HID reports by hid core due to
optimization.

In such case, the hid-sensor-custom driver cannot match a known custom
sensor in hid_sensor_custom_get_known() because it try to check custom
properties which weren't filled from the report because hid core didn't
parsed it.

As result, custom sensors like hinge angle sensor and LISS sensors
don't work.

Mark the sensor hub devices claimed by some driver to avoid hidraw-related
optimizations.

Fixes: 666cf30a589a ("HID: sensor-hub: Allow multi-function sensor devices")
Cc: stable@vger.kernel.org
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231219231503.1506801-1-jekhor@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7091r: Pass iio_dev to event handler

commit a25a7df518fc71b1ba981d691e9322e645d2689c upstream.

Previous version of ad7091r event handler received the ADC state pointer
and retrieved the iio device from driver data field with dev_get_drvdata().
However, no driver data have ever been set, which led to null pointer
dereference when running the event handler.

Pass the iio device to the event handler and retrieve the ADC state struct
from it so we avoid the null pointer dereference and save the driver from
filling the driver data field.

Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/pmu: Reset the PMU, i.e. stop counters, before refreshing

commit 1647b52757d59131fe30cf73fa36fac834d4367f upstream.

Stop all counters and release all perf events before refreshing the vPMU,
i.e. before reconfiguring the vPMU to respond to changes in the vCPU
model.

Clear need_cleanup in kvm_pmu_reset() as well so that KVM doesn't
prematurely stop counters, e.g. if KVM enters the guest and enables
counters before the vCPU is scheduled out.

Cc: stable@vger.kernel.org
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/pmu: Move PMU reset logic to common x86 code

commit cbb359d81a2695bb5e63ec9de06fcbef28518891 upstream.

Move the common (or at least "ignored") aspects of resetting the vPMU to
common x86 code, along with the stop/release helpers that are no used only
by the common pmu.c.

There is no need to manually handle fixed counters as all_valid_pmc_idx
tracks both fixed and general purpose counters, and resetting the vPMU is
far from a hot path, i.e. the extra bit of overhead to the PMC from the
index is a non-issue.

Zero fixed_ctr_ctrl in common code even though it's Intel specific.
Ensuring it's zero doesn't harm AMD/SVM in any way, and stopping the fixed
counters via all_valid_pmc_idx, but not clearing the associated control
bits, would be odd/confusing.

Make the .reset() hook optional as SVM no longer needs vendor specific
handling.

Cc: stable@vger.kernel.org
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>