Will Deacon [Tue, 3 Apr 2018 11:09:20 +0000 (12:09 +0100)]
arm64: kpti: Add ->enable callback to remap swapper using nG mappings
commit
f992b4dfd58b upstream.
Defaulting to global mappings for kernel space is generally good for
performance and appears to be necessary for Cavium ThunderX. If we
subsequently decide that we need to enable kpti, then we need to rewrite
our existing page table entries to be non-global. This is fiddly, and
made worse by the possible use of contiguous mappings, which require
a strict break-before-make sequence.
Since the enable callback runs on each online CPU from stop_machine
context, we can have all CPUs enter the idmap, where secondaries can
wait for the primary CPU to rewrite swapper with its MMU off. It's all
fairly horrible, but at least it only runs once.
Nicolas Dechesne <nicolas.dechesne@linaro.org> found a bug on this commit
which cause boot failure on db410c etc board. Ard Biesheuvel found it
writting wrong contenct to ttbr1_el1 in __idmap_cpu_set_reserved_ttbr1
macro and fixed it by give it the right content.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Alex: avoid dependency on 52-bit PA patches and TTBR/MMU erratum patches]
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:19 +0000 (12:09 +0100)]
arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()
commit
41acec624087 upstream.
To allow systems which do not require kpti to continue running with
global kernel mappings (which appears to be a requirement for Cavium
ThunderX due to a CPU erratum), make the use of nG in the kernel page
tables dependent on arm64_kernel_unmapped_at_el0(), which is resolved
at runtime.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jayachandran C [Tue, 3 Apr 2018 11:09:18 +0000 (12:09 +0100)]
arm64: Turn on KPTI only on CPUs that need it
commit
0ba2e29c7fc1 upstream.
Whitelist Broadcom Vulcan/Cavium ThunderX2 processors in
unmap_kernel_at_el0(). These CPUs are not vulnerable to
CVE-2017-5754 and do not need KPTI when KASLR is off.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jayachandran C [Tue, 3 Apr 2018 11:09:17 +0000 (12:09 +0100)]
arm64: cputype: Add MIDR values for Cavium ThunderX2 CPUs
commit
0d90718871fe upstream.
Add the older Broadcom ID as well as the new Cavium ID for ThunderX2
CPUs.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Tue, 3 Apr 2018 11:09:16 +0000 (12:09 +0100)]
arm64: capabilities: Handle duplicate entries for a capability
commit
67948af41f2e upstream.
Sometimes a single capability could be listed multiple times with
differing matches(), e.g, CPU errata for different MIDR versions.
This breaks verify_local_cpu_feature() and this_cpu_has_cap() as
we stop checking for a capability on a CPU with the first
entry in the given table, which is not sufficient. Make sure we
run the checks for all entries of the same capability. We do
this by fixing __this_cpu_has_cap() to run through all the
entries in the given table for a match and reuse it for
verify_local_cpu_feature().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 3 Apr 2018 11:09:15 +0000 (12:09 +0100)]
arm64: Allow checking of a CPU-local erratum
commit
8f4137588261d7504f4aa022dc9d1a1fd1940e8e upstream.
this_cpu_has_cap() only checks the feature array, and not the errata
one. In order to be able to check for a CPU-local erratum, allow it
to inspect the latter as well.
This is consistent with cpus_have_cap()'s behaviour, which includes
errata already.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:14 +0000 (12:09 +0100)]
arm64: Take into account ID_AA64PFR0_EL1.CSV3
commit
179a56f6f9fb upstream.
For non-KASLR kernels where the KPTI behaviour has not been overridden
on the command line we can use ID_AA64PFR0_EL1.CSV3 to determine whether
or not we should unmap the kernel whilst running at EL0.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[Alex: s/read_sanitised_ftr_reg/read_system_reg/ to match v4.9 naming]
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
[Mark: correct zero bits in ftr_id_aa64pfr0 to account for CSV3]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:13 +0000 (12:09 +0100)]
arm64: Kconfig: Reword UNMAP_KERNEL_AT_EL0 kconfig entry
commit
0617052ddde3 upstream.
Although CONFIG_UNMAP_KERNEL_AT_EL0 does make KASLR more robust, it's
actually more useful as a mitigation against speculation attacks that
can leak arbitrary kernel data to userspace through speculation.
Reword the Kconfig help message to reflect this, and make the option
depend on EXPERT so that it is on by default for the majority of users.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:12 +0000 (12:09 +0100)]
arm64: Kconfig: Add CONFIG_UNMAP_KERNEL_AT_EL0
commit
084eb77cd3a8 upstream.
Add a Kconfig entry to control use of the entry trampoline, which allows
us to unmap the kernel whilst running in userspace and improve the
robustness of KASLR.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:11 +0000 (12:09 +0100)]
arm64: use RET instruction for exiting the trampoline
commit
be04a6d1126b upstream.
Speculation attacks against the entry trampoline can potentially resteer
the speculative instruction stream through the indirect branch and into
arbitrary gadgets within the kernel.
This patch defends against these attacks by forcing a misprediction
through the return stack: a dummy BL instruction loads an entry into
the stack, so that the predicted program flow of the subsequent RET
instruction is to a branch-to-self instruction which is finally resolved
as a branch to the kernel vectors with speculation suppressed.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:10 +0000 (12:09 +0100)]
arm64: kaslr: Put kernel vectors address in separate data page
commit
6c27c4082f4f upstream.
The literal pool entry for identifying the vectors base is the only piece
of information in the trampoline page that identifies the true location
of the kernel.
This patch moves it into a page-aligned region of the .rodata section
and maps this adjacent to the trampoline text via an additional fixmap
entry, which protects against any accidental leakage of the trampoline
contents.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[Alex: avoid ARM64_WORKAROUND_QCOM_FALKOR_E1003 dependency]
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:09 +0000 (12:09 +0100)]
arm64: entry: Add fake CPU feature for unmapping the kernel at EL0
commit
ea1e3de85e94 upstream.
Allow explicit disabling of the entry trampoline on the kernel command
line (kpti=off) by adding a fake CPU feature (ARM64_UNMAP_KERNEL_AT_EL0)
that can be used to toggle the alternative sequences in our entry code and
avoid use of the trampoline altogether if desired. This also allows us to
make use of a static key in arm64_kernel_unmapped_at_el0().
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[Alex: use first free cpucap number, use cpus_have_cap]
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:08 +0000 (12:09 +0100)]
arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks
commit
18011eac28c7 upstream.
When unmapping the kernel at EL0, we use tpidrro_el0 as a scratch register
during exception entry from native tasks and subsequently zero it in
the kernel_ventry macro. We can therefore avoid zeroing tpidrro_el0
in the context-switch path for native tasks using the entry trampoline.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:07 +0000 (12:09 +0100)]
arm64: entry: Hook up entry trampoline to exception vectors
commit
4bf3286d29f3 upstream.
Hook up the entry trampoline to our exception vectors so that all
exceptions from and returns to EL0 go via the trampoline, which swizzles
the vector base register accordingly. Transitioning to and from the
kernel clobbers x30, so we use tpidrro_el0 and far_el1 as scratch
registers for native tasks.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:06 +0000 (12:09 +0100)]
arm64: entry: Explicitly pass exception level to kernel_ventry macro
commit
5b1f7fe41909 upstream.
We will need to treat exceptions from EL0 differently in kernel_ventry,
so rework the macro to take the exception level as an argument and
construct the branch target using that.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
[Mark: avoid dependency on C error handler backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:05 +0000 (12:09 +0100)]
arm64: mm: Map entry trampoline into trampoline and kernel page tables
commit
51a0048beb44 upstream.
The exception entry trampoline needs to be mapped at the same virtual
address in both the trampoline page table (which maps nothing else)
and also the kernel page table, so that we can swizzle TTBR1_EL1 on
exceptions from and return to EL0.
This patch maps the trampoline at a fixed virtual address in the fixmap
area of the kernel virtual address space, which allows the kernel proper
to be randomized with respect to the trampoline when KASLR is enabled.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:04 +0000 (12:09 +0100)]
arm64: entry: Add exception trampoline page for exceptions from EL0
commit
c7b9adaf85f8 upstream.
To allow unmapping of the kernel whilst running at EL0, we need to
point the exception vectors at an entry trampoline that can map/unmap
the kernel on entry/exit respectively.
This patch adds the trampoline page, although it is not yet plugged
into the vector table and is therefore unused.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[Alex: avoid dependency on SW PAN patches]
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
[Mark: remove dummy SW PAN definitions]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AKASHI Takahiro [Tue, 3 Apr 2018 11:09:03 +0000 (12:09 +0100)]
module: extend 'rodata=off' boot cmdline parameter to module mappings
commit
39290b389ea upstream.
The current "rodata=off" parameter disables read-only kernel mappings
under CONFIG_DEBUG_RODATA:
commit
d2aa1acad22f ("mm/init: Add 'rodata=off' boot cmdline parameter
to disable read-only kernel mappings")
This patch is a logical extension to module mappings ie. read-only mappings
at module loading can be disabled even if CONFIG_DEBUG_SET_MODULE_RONX
(mainly for debug use). Please note, however, that it only affects RO/RW
permissions, keeping NX set.
This is the first step to make CONFIG_DEBUG_SET_MODULE_RONX mandatory
(always-on) in the future as CONFIG_DEBUG_RODATA on x86 and arm64.
Suggested-by: and Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/20161114061505.15238-1-takahiro.akashi@linaro.org
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Tue, 3 Apr 2018 11:09:02 +0000 (12:09 +0100)]
arm64: factor out entry stack manipulation
commit
b11e5759bfac upstream.
In subsequent patches, we will detect stack overflow in our exception
entry code, by verifying the SP after it has been decremented to make
space for the exception regs.
This verification code is small, and we can minimize its impact by
placing it directly in the vectors. To avoid redundant modification of
the SP, we also need to move the initial decrement of the SP into the
vectors.
As a preparatory step, this patch introduces kernel_ventry, which
performs this decrement, and updates the entry code accordingly.
Subsequent patches will fold SP verification into kernel_ventry.
There should be no functional change as a result of this patch.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Mark: turn into prep patch, expand commit msg]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:01 +0000 (12:09 +0100)]
arm64: mm: Invalidate both kernel and user ASIDs when performing TLBI
commit
9b0de864b5bc upstream.
Since an mm has both a kernel and a user ASID, we need to ensure that
broadcast TLB maintenance targets both address spaces so that things
like CoW continue to work with the uaccess primitives in the kernel.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:09:00 +0000 (12:09 +0100)]
arm64: mm: Add arm64_kernel_unmapped_at_el0 helper
commit
fc0e1299da54 upstream.
In order for code such as TLB invalidation to operate efficiently when
the decision to map the kernel at EL0 is determined at runtime, this
patch introduces a helper function, arm64_kernel_unmapped_at_el0, to
determine whether or not the kernel is mapped whilst running in userspace.
Currently, this just reports the value of CONFIG_UNMAP_KERNEL_AT_EL0,
but will later be hooked up to a fake CPU capability using a static key.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:08:59 +0000 (12:08 +0100)]
arm64: mm: Allocate ASIDs in pairs
commit
0c8ea531b774 upstream.
In preparation for separate kernel/user ASIDs, allocate them in pairs
for each mm_struct. The bottom bit distinguishes the two: if it is set,
then the ASID will map only userspace.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:08:58 +0000 (12:08 +0100)]
arm64: mm: Move ASID from TTBR0 to TTBR1
commit
7655abb95386 upstream.
In preparation for mapping kernelspace and userspace with different
ASIDs, move the ASID to TTBR1 and update switch_mm to context-switch
TTBR0 via an invalid mapping (the zero page).
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 3 Apr 2018 11:08:57 +0000 (12:08 +0100)]
arm64: mm: Use non-global mappings for kernel space
commit
e046eb0c9bf2 upstream.
In preparation for unmapping the kernel whilst running in userspace,
make the kernel mappings non-global so we can avoid expensive TLB
invalidation on kernel exit to userspace.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Shi <alex.shi@linaro.org> [v4.9 backport]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Mon, 23 Oct 2017 21:32:48 +0000 (14:32 -0700)]
usb: dwc2: Improve gadget state disconnection handling
commit
d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream.
In the earlier commit
dad3f793f20f ("usb: dwc2: Make sure we
disconnect the gadget state"), I was trying to fix up the
fact that we somehow weren't disconnecting the gadget state,
so that when the OTG port was plugged in the second time we
would get warnings about the state tracking being wrong.
(This seems to be due to a quirk of the HiKey board where
we do not ever get any otg interrupts, particularly the session
end detected signal. Instead we only see status change
interrupt.)
The fix there was somewhat simple, as it just made sure to
call dwc2_hsotg_disconnect() before we connected things up
in OTG mode, ensuring the state handling didn't throw errors.
But in looking at a different issue I was seeing with UDC
state handling, I realized that it would be much better
to call dwc2_hsotg_disconnect when we get the state change
signal moving to host mode.
Thus, this patch removes the earlier disconnect call I added
and moves it (and the needed locking) to the host mode
transition.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Tested-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Wed, 5 Jul 2017 08:30:56 +0000 (10:30 +0200)]
scsi: virtio_scsi: always read VPD pages for multiqueue too
commit
a680f1d463aeaeb00d22af257a56e111967c2f18 upstream.
Multi-queue virtio-scsi uses a different scsi_host_template struct. Add
the .device_alloc field there, too.
Fixes:
25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0
Cc: stable@vger.kernel.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Potapenko [Wed, 19 Jul 2017 18:27:30 +0000 (20:27 +0200)]
llist: clang: introduce member_address_is_nonnull()
commit
beaec533fc2701a28a4d667f67c9f59c6e4e0d13 upstream.
Currently llist_for_each_entry() and llist_for_each_entry_safe() iterate
until &pos->member != NULL. But when building the kernel with Clang,
the compiler assumes &pos->member cannot be NULL if the member's offset
is greater than 0 (which would be equivalent to the object being
non-contiguous in memory). Therefore the loop condition is always true,
and the loops become infinite.
To work around this, introduce the member_address_is_nonnull() macro,
which casts object pointer to uintptr_t, thus letting the member pointer
to be NULL.
Signed-off-by: Alexander Potapenko <glider@google.com>
Tested-by: Sodagudi Prasad <psodagud@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon Janc [Mon, 26 Feb 2018 14:41:53 +0000 (15:41 +0100)]
Bluetooth: Fix missing encryption refresh on Security Request
commit
64e759f58f128730b97a3c3a26d283c075ad7c86 upstream.
If Security Request is received on connection that is already encrypted
with sufficient security master should perform encryption key refresh
procedure instead of just ignoring Slave Security Request
(Core Spec 5.0 Vol 3 Part H 2.4.6).
> ACL Data RX: Handle 3585 flags 0x02 dlen 6
SMP: Security Request (0x0b) len 1
Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09)
< HCI Command: LE Start Encryption (0x08|0x0019) plen 28
Handle: 3585
Random number: 0x0000000000000000
Encrypted diversifier: 0x0000
Long term key:
44264272a5c426a9e868f034cf0e69f3
> HCI Event: Command Status (0x0f) plen 4
LE Start Encryption (0x08|0x0019) ncmd 1
Status: Success (0x00)
> HCI Event: Encryption Key Refresh Complete (0x30) plen 3
Status: Success (0x00)
Handle: 3585
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Sat, 10 Mar 2018 00:15:45 +0000 (01:15 +0100)]
netfilter: x_tables: add and use xt_check_proc_name
commit
b1d0a5d0cba4597c0394997b2d5fced3e3841b4e upstream.
recent and hashlimit both create /proc files, but only check that
name is 0 terminated.
This can trigger WARN() from procfs when name is "" or "/".
Add helper for this and then use it for both.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: <syzbot+0502b00edac2a0680b61@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 9 Mar 2018 13:27:31 +0000 (14:27 +0100)]
netfilter: bridge: ebt_among: add more missing match size checks
commit
c8d70a700a5b486bfa8e5a7d33d805389f6e59f9 upstream.
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
commit
c4585a2823edf ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.
v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part
NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.
Tested with same rules from the earlier patch.
Fixes:
c4585a2823edf ("bridge: ebt_among: add missing match size checks")
Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Klassert [Thu, 1 Feb 2018 07:49:23 +0000 (08:49 +0100)]
xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems
commit
19d7df69fdb2636856dc8919de72fc1bf8f79598 upstream.
We don't have a compat layer for xfrm, so userspace and kernel
structures have different sizes in this case. This results in
a broken configuration, so refuse to configure socket policies
when trying to insert from 32 bit userspace as we do it already
with policies inserted via netlink.
Reported-and-tested-by: syzbot+e1a1577ca8bcb47b769a@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Hackmann [Wed, 7 Mar 2018 22:42:53 +0000 (14:42 -0800)]
net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
commit
0dcd7876029b58770f769cbb7b484e88e4a305e5 upstream.
f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a
__this_cpu_read() call inside ipcomp_alloc_tfms().
At the time, __this_cpu_read() required the caller to either not care
about races or to handle preemption/interrupt issues. 3.15 tightened
the rules around some per-cpu operations, and now __this_cpu_read()
should never be used in a preemptible context. On 3.15 and later, we
need to use this_cpu_read() instead.
syzkaller reported this leading to the following kernel BUG while
fuzzing sendmsg:
BUG: using __this_cpu_read() in preemptible [
00000000] code: repro/3101
caller is ipcomp_init_state+0x185/0x990
CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779d8e9 #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0xb9/0x115
check_preemption_disabled+0x1cb/0x1f0
ipcomp_init_state+0x185/0x990
? __xfrm_init_state+0x876/0xc20
? lock_downgrade+0x5e0/0x5e0
ipcomp4_init_state+0xaa/0x7c0
__xfrm_init_state+0x3eb/0xc20
xfrm_init_state+0x19/0x60
pfkey_add+0x20df/0x36f0
? pfkey_broadcast+0x3dd/0x600
? pfkey_sock_destruct+0x340/0x340
? pfkey_seq_stop+0x80/0x80
? __skb_clone+0x236/0x750
? kmem_cache_alloc+0x1f6/0x260
? pfkey_sock_destruct+0x340/0x340
? pfkey_process+0x62a/0x6f0
pfkey_process+0x62a/0x6f0
? pfkey_send_new_mapping+0x11c0/0x11c0
? mutex_lock_io_nested+0x1390/0x1390
pfkey_sendmsg+0x383/0x750
? dump_sp+0x430/0x430
sock_sendmsg+0xc0/0x100
___sys_sendmsg+0x6c8/0x8b0
? copy_msghdr_from_user+0x3b0/0x3b0
? pagevec_lru_move_fn+0x144/0x1f0
? find_held_lock+0x32/0x1c0
? do_huge_pmd_anonymous_page+0xc43/0x11e0
? lock_downgrade+0x5e0/0x5e0
? get_kernel_page+0xb0/0xb0
? _raw_spin_unlock+0x29/0x40
? do_huge_pmd_anonymous_page+0x400/0x11e0
? __handle_mm_fault+0x553/0x2460
? __fget_light+0x163/0x1f0
? __sys_sendmsg+0xc7/0x170
__sys_sendmsg+0xc7/0x170
? SyS_shutdown+0x1a0/0x1a0
? __do_page_fault+0x5a0/0xca0
? lock_downgrade+0x5e0/0x5e0
SyS_sendmsg+0x27/0x40
? __sys_sendmsg+0x170/0x170
do_syscall_64+0x19f/0x640
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f0ee73dfb79
RSP: 002b:
00007ffe14fc15a8 EFLAGS:
00000207 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f0ee73dfb79
RDX:
0000000000000000 RSI:
00000000208befc8 RDI:
0000000000000004
RBP:
00007ffe14fc15b0 R08:
00007ffe14fc15c0 R09:
00007ffe14fc15c0
R10:
0000000000000000 R11:
0000000000000207 R12:
0000000000400440
R13:
00007ffe14fc16b0 R14:
0000000000000000 R15:
0000000000000000
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roland Dreier [Wed, 28 Mar 2018 18:27:22 +0000 (11:27 -0700)]
RDMA/ucma: Introduce safer rdma_addr_size() variants
commit
84652aefb347297aa08e91e283adf7b18f77c2d5 upstream.
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Sun, 25 Mar 2018 08:39:05 +0000 (11:39 +0300)]
RDMA/ucma: Check that device exists prior to accessing it
commit
c8d3bcbfc5eab3f01cf373d039af725f3b488813 upstream.
Ensure that device exists prior to accessing its properties.
Reported-by: <syzbot+71655d44855ac3e76366@syzkaller.appspotmail.com>
Fixes:
75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Sun, 25 Mar 2018 08:23:55 +0000 (11:23 +0300)]
RDMA/ucma: Check that device is connected prior to access it
commit
4b658d1bbc16605330694bb3ef2570c465ef383d upstream.
Add missing check that device is connected prior to access it.
[ 55.358652] BUG: KASAN: null-ptr-deref in rdma_init_qp_attr+0x4a/0x2c0
[ 55.359389] Read of size 8 at addr
00000000000000b0 by task qp/618
[ 55.360255]
[ 55.360432] CPU: 1 PID: 618 Comm: qp Not tainted 4.16.0-rc1-00071-gcaf61b1b8b88 #91
[ 55.361693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 55.363264] Call Trace:
[ 55.363833] dump_stack+0x5c/0x77
[ 55.364215] kasan_report+0x163/0x380
[ 55.364610] ? rdma_init_qp_attr+0x4a/0x2c0
[ 55.365238] rdma_init_qp_attr+0x4a/0x2c0
[ 55.366410] ucma_init_qp_attr+0x111/0x200
[ 55.366846] ? ucma_notify+0xf0/0xf0
[ 55.367405] ? _get_random_bytes+0xea/0x1b0
[ 55.367846] ? urandom_read+0x2f0/0x2f0
[ 55.368436] ? kmem_cache_alloc_trace+0xd2/0x1e0
[ 55.369104] ? refcount_inc_not_zero+0x9/0x60
[ 55.369583] ? refcount_inc+0x5/0x30
[ 55.370155] ? rdma_create_id+0x215/0x240
[ 55.370937] ? _copy_to_user+0x4f/0x60
[ 55.371620] ? mem_cgroup_commit_charge+0x1f5/0x290
[ 55.372127] ? _copy_from_user+0x5e/0x90
[ 55.372720] ucma_write+0x174/0x1f0
[ 55.373090] ? ucma_close_id+0x40/0x40
[ 55.373805] ? __lru_cache_add+0xa8/0xd0
[ 55.374403] __vfs_write+0xc4/0x350
[ 55.374774] ? kernel_read+0xa0/0xa0
[ 55.375173] ? fsnotify+0x899/0x8f0
[ 55.375544] ? fsnotify_unmount_inodes+0x170/0x170
[ 55.376689] ? __fsnotify_update_child_dentry_flags+0x30/0x30
[ 55.377522] ? handle_mm_fault+0x174/0x320
[ 55.378169] vfs_write+0xf7/0x280
[ 55.378864] SyS_write+0xa1/0x120
[ 55.379270] ? SyS_read+0x120/0x120
[ 55.379643] ? mm_fault_error+0x180/0x180
[ 55.380071] ? task_work_run+0x7d/0xd0
[ 55.380910] ? __task_pid_nr_ns+0x120/0x140
[ 55.381366] ? SyS_read+0x120/0x120
[ 55.381739] do_syscall_64+0xeb/0x250
[ 55.382143] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 55.382841] RIP: 0033:0x7fc2ef803e99
[ 55.383227] RSP: 002b:
00007fffcc5f3be8 EFLAGS:
00000217 ORIG_RAX:
0000000000000001
[ 55.384173] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fc2ef803e99
[ 55.386145] RDX:
0000000000000057 RSI:
0000000020000080 RDI:
0000000000000003
[ 55.388418] RBP:
00007fffcc5f3c00 R08:
0000000000000000 R09:
0000000000000000
[ 55.390542] R10:
0000000000000000 R11:
0000000000000217 R12:
0000000000400480
[ 55.392916] R13:
00007fffcc5f3cf0 R14:
0000000000000000 R15:
0000000000000000
[ 55.521088] Code: e5 4d 1e ff 48 89 df 44 0f b6 b3 b8 01 00 00 e8 65 50 1e ff 4c 8b 2b 49
8d bd b0 00 00 00 e8 56 50 1e ff 41 0f b6 c6 48 c1 e0 04 <49> 03 85 b0 00 00 00 48 8d 78 08
48 89 04 24 e8 3a 4f 1e ff 48
[ 55.525980] RIP: rdma_init_qp_attr+0x52/0x2c0 RSP:
ffff8801e2c2f9d8
[ 55.532648] CR2:
00000000000000b0
[ 55.534396] ---[ end trace
70cee64090251c0b ]---
Fixes:
75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Fixes:
d541e45500bd ("IB/core: Convert ah_attr from OPA to IB when copying to user")
Reported-by: <syzbot+7b62c837c2516f8f38c8@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Tue, 20 Mar 2018 15:05:13 +0000 (17:05 +0200)]
RDMA/ucma: Ensure that CM_ID exists prior to access it
commit
e8980d67d6017c8eee8f9c35f782c4bd68e004c9 upstream.
Prior to access UCMA commands, the context should be initialized
and connected to CM_ID with ucma_create_id(). In case user skips
this step, he can provide non-valid ctx without CM_ID and cause
to multiple NULL dereferences.
Also there are situations where the create_id can be raced with
other user access, ensure that the context is only shared to
other threads once it is fully initialized to avoid the races.
[ 109.088108] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[ 109.090315] IP: ucma_connect+0x138/0x1d0
[ 109.092595] PGD
80000001dc02d067 P4D
80000001dc02d067 PUD
1da9ef067 PMD 0
[ 109.095384] Oops: 0000 [#1] SMP KASAN PTI
[ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45
[ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0
[ 109.108850] RSP: 0018:
ffff8801c8567a80 EFLAGS:
00010246
[ 109.111484] RAX:
0000000000000000 RBX:
1ffff100390acf50 RCX:
ffffffff9d7812e2
[ 109.114496] RDX:
1ffffffff3f507a5 RSI:
0000000000000297 RDI:
0000000000000297
[ 109.117490] RBP:
ffff8801daa15600 R08:
0000000000000000 R09:
ffffed00390aceeb
[ 109.120429] R10:
0000000000000001 R11:
ffffed00390aceea R12:
0000000000000000
[ 109.123318] R13:
0000000000000120 R14:
ffff8801de6459c0 R15:
0000000000000118
[ 109.126221] FS:
00007fabb68d6700(0000) GS:
ffff8801e5c00000(0000) knlGS:
0000000000000000
[ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 109.132523] CR2:
0000000000000020 CR3:
00000001d45d8003 CR4:
00000000003606b0
[ 109.135573] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 109.138716] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 109.142057] Call Trace:
[ 109.144160] ? ucma_listen+0x110/0x110
[ 109.146386] ? wake_up_q+0x59/0x90
[ 109.148853] ? futex_wake+0x10b/0x2a0
[ 109.151297] ? save_stack+0x89/0xb0
[ 109.153489] ? _copy_from_user+0x5e/0x90
[ 109.155500] ucma_write+0x174/0x1f0
[ 109.157933] ? ucma_resolve_route+0xf0/0xf0
[ 109.160389] ? __mod_node_page_state+0x1d/0x80
[ 109.162706] __vfs_write+0xc4/0x350
[ 109.164911] ? kernel_read+0xa0/0xa0
[ 109.167121] ? path_openat+0x1b10/0x1b10
[ 109.169355] ? fsnotify+0x899/0x8f0
[ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170
[ 109.174145] ? __fget+0xa8/0xf0
[ 109.177110] vfs_write+0xf7/0x280
[ 109.179532] SyS_write+0xa1/0x120
[ 109.181885] ? SyS_read+0x120/0x120
[ 109.184482] ? compat_start_thread+0x60/0x60
[ 109.187124] ? SyS_read+0x120/0x120
[ 109.189548] do_syscall_64+0xeb/0x250
[ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 109.194725] RIP: 0033:0x7fabb61ebe99
[ 109.197040] RSP: 002b:
00007fabb68d5e98 EFLAGS:
00000202 ORIG_RAX:
0000000000000001
[ 109.200294] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fabb61ebe99
[ 109.203399] RDX:
0000000000000120 RSI:
00000000200001c0 RDI:
0000000000000004
[ 109.206548] RBP:
00007fabb68d5ec0 R08:
0000000000000000 R09:
0000000000000000
[ 109.209902] R10:
0000000000000000 R11:
0000000000000202 R12:
00007fabb68d5fc0
[ 109.213327] R13:
0000000000000000 R14:
00007fff40ab2430 R15:
00007fabb68d69c0
[ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f
b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff
31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7
[ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP:
ffff8801c8567a80
[ 109.226256] CR2:
0000000000000020
Fixes:
75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Mon, 19 Mar 2018 12:20:15 +0000 (14:20 +0200)]
RDMA/ucma: Fix use-after-free access in ucma_close
commit
ed65a4dc22083e73bac599ded6a262318cad7baf upstream.
The error in ucma_create_id() left ctx in the list of contexts belong
to ucma file descriptor. The attempt to close this file descriptor causes
to use-after-free accesses while iterating over such list.
Fixes:
75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Thu, 15 Mar 2018 13:33:02 +0000 (15:33 +0200)]
RDMA/ucma: Check AF family prior resolving address
commit
2975d5de6428ff6d9317e9948f0968f7d42e5d74 upstream.
Garbage supplied by user will cause to UCMA module provide zero
memory size for memcpy(), because it wasn't checked, it will
produce unpredictable results in rdma_resolve_addr().
[ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0
[ 42.874816] Write of size 28 at addr
00000000000000a0 by task resaddr/1044
[ 42.876765]
[ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e #34
[ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 42.879691] Call Trace:
[ 42.880236] dump_stack+0x5c/0x77
[ 42.880664] kasan_report+0x163/0x380
[ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0
[ 42.881864] memcpy+0x34/0x50
[ 42.882692] rdma_resolve_addr+0xc8/0xfb0
[ 42.883366] ? deref_stack_reg+0x88/0xd0
[ 42.883856] ? vsnprintf+0x31a/0x770
[ 42.884686] ? rdma_bind_addr+0xc40/0xc40
[ 42.885327] ? num_to_str+0x130/0x130
[ 42.885773] ? deref_stack_reg+0x88/0xd0
[ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10
[ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50
[ 42.888302] ? replace_slot+0x147/0x170
[ 42.889176] ? delete_node+0x12c/0x340
[ 42.890223] ? __radix_tree_lookup+0xa9/0x160
[ 42.891196] ? ucma_resolve_ip+0xb7/0x110
[ 42.891917] ucma_resolve_ip+0xb7/0x110
[ 42.893003] ? ucma_resolve_addr+0x190/0x190
[ 42.893531] ? _copy_from_user+0x5e/0x90
[ 42.894204] ucma_write+0x174/0x1f0
[ 42.895162] ? ucma_resolve_route+0xf0/0xf0
[ 42.896309] ? dequeue_task_fair+0x67e/0xd90
[ 42.897192] ? put_prev_entity+0x7d/0x170
[ 42.897870] ? ring_buffer_record_is_on+0xd/0x20
[ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50
[ 42.899686] __vfs_write+0xc4/0x350
[ 42.900142] ? kernel_read+0xa0/0xa0
[ 42.900602] ? firmware_map_remove+0xdf/0xdf
[ 42.901135] ? do_task_dead+0x5d/0x60
[ 42.901598] ? do_exit+0xcc6/0x1220
[ 42.902789] ? __fget+0xa8/0xf0
[ 42.903190] vfs_write+0xf7/0x280
[ 42.903600] SyS_write+0xa1/0x120
[ 42.904206] ? SyS_read+0x120/0x120
[ 42.905710] ? compat_start_thread+0x60/0x60
[ 42.906423] ? SyS_read+0x120/0x120
[ 42.908716] do_syscall_64+0xeb/0x250
[ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 42.912735] RIP: 0033:0x7f138b0afe99
[ 42.914734] RSP: 002b:
00007f138b799e98 EFLAGS:
00000287 ORIG_RAX:
0000000000000001
[ 42.917134] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f138b0afe99
[ 42.919487] RDX:
000000000000002e RSI:
0000000020000c40 RDI:
0000000000000004
[ 42.922393] RBP:
00007f138b799ec0 R08:
00007f138b79a700 R09:
0000000000000000
[ 42.925266] R10:
00007f138b79a700 R11:
0000000000000287 R12:
00007f138b799fc0
[ 42.927570] R13:
0000000000000000 R14:
00007ffdbae757c0 R15:
00007f138b79a9c0
[ 42.930047]
[ 42.932681] Disabling lock debugging due to kernel taint
[ 42.934795] BUG: unable to handle kernel NULL pointer dereference at
00000000000000a0
[ 42.936939] IP: memcpy_erms+0x6/0x10
[ 42.938864] PGD
80000001bea92067 P4D
80000001bea92067 PUD
1bea96067 PMD 0
[ 42.941576] Oops: 0002 [#1] SMP KASAN PTI
[ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e #34
[ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10
[ 42.954707] RSP: 0018:
ffff8801c8b479c8 EFLAGS:
00010286
[ 42.957227] RAX:
00000000000000a0 RBX:
ffff8801c8b47ba0 RCX:
000000000000001c
[ 42.960543] RDX:
000000000000001c RSI:
ffff8801c8b47bbc RDI:
00000000000000a0
[ 42.963867] RBP:
ffff8801c8b47b60 R08:
0000000000000000 R09:
ffffed0039168ed1
[ 42.967303] R10:
0000000000000001 R11:
ffffed0039168ed0 R12:
ffff8801c8b47bbc
[ 42.970685] R13:
00000000000000a0 R14:
1ffff10039168f4a R15:
0000000000000000
[ 42.973631] FS:
00007f138b79a700(0000) GS:
ffff8801e5d00000(0000) knlGS:
0000000000000000
[ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 42.979239] CR2:
00000000000000a0 CR3:
00000001be908002 CR4:
00000000003606a0
[ 42.982060] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 42.984877] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 42.988033] Call Trace:
[ 42.990487] rdma_resolve_addr+0xc8/0xfb0
[ 42.993202] ? deref_stack_reg+0x88/0xd0
[ 42.996055] ? vsnprintf+0x31a/0x770
[ 42.998707] ? rdma_bind_addr+0xc40/0xc40
[ 43.000985] ? num_to_str+0x130/0x130
[ 43.003410] ? deref_stack_reg+0x88/0xd0
[ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10
[ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50
[ 43.011178] ? replace_slot+0x147/0x170
[ 43.013517] ? delete_node+0x12c/0x340
[ 43.016019] ? __radix_tree_lookup+0xa9/0x160
[ 43.018755] ? ucma_resolve_ip+0xb7/0x110
[ 43.021270] ucma_resolve_ip+0xb7/0x110
[ 43.023968] ? ucma_resolve_addr+0x190/0x190
[ 43.026312] ? _copy_from_user+0x5e/0x90
[ 43.029384] ucma_write+0x174/0x1f0
[ 43.031861] ? ucma_resolve_route+0xf0/0xf0
[ 43.034782] ? dequeue_task_fair+0x67e/0xd90
[ 43.037483] ? put_prev_entity+0x7d/0x170
[ 43.040215] ? ring_buffer_record_is_on+0xd/0x20
[ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50
[ 43.045595] __vfs_write+0xc4/0x350
[ 43.048624] ? kernel_read+0xa0/0xa0
[ 43.051604] ? firmware_map_remove+0xdf/0xdf
[ 43.055379] ? do_task_dead+0x5d/0x60
[ 43.058000] ? do_exit+0xcc6/0x1220
[ 43.060783] ? __fget+0xa8/0xf0
[ 43.063133] vfs_write+0xf7/0x280
[ 43.065677] SyS_write+0xa1/0x120
[ 43.068647] ? SyS_read+0x120/0x120
[ 43.071179] ? compat_start_thread+0x60/0x60
[ 43.074025] ? SyS_read+0x120/0x120
[ 43.076705] do_syscall_64+0xeb/0x250
[ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 43.081606] RIP: 0033:0x7f138b0afe99
[ 43.083679] RSP: 002b:
00007f138b799e98 EFLAGS:
00000287 ORIG_RAX:
0000000000000001
[ 43.086802] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f138b0afe99
[ 43.089989] RDX:
000000000000002e RSI:
0000000020000c40 RDI:
0000000000000004
[ 43.092866] RBP:
00007f138b799ec0 R08:
00007f138b79a700 R09:
0000000000000000
[ 43.096233] R10:
00007f138b79a700 R11:
0000000000000287 R12:
00007f138b799fc0
[ 43.098913] R13:
0000000000000000 R14:
00007ffdbae757c0 R15:
00007f138b79a9c0
[ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38
[ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP:
ffff8801c8b479c8
Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com>
Fixes:
75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Mon, 12 Feb 2018 13:42:01 +0000 (14:42 +0100)]
xfrm_user: uncoditionally validate esn replay attribute struct
commit
d97ca5d714a5334aecadadf696875da40f1fbf3e upstream.
The sanity test added in
ecd7918745234 can be bypassed, validation
only occurs if XFRM_STATE_ESN flag is set, but rest of code doesn't care
and just checks if the attribute itself is present.
So always validate. Alternative is to reject if we have the attribute
without the flag but that would change abi.
Reported-by: syzbot+0ab777c27d2bb7588f73@syzkaller.appspotmail.com
Cc: Mathias Krause <minipli@googlemail.com>
Fixes:
ecd7918745234 ("xfrm_user: ensure user supplied esn replay window is valid")
Fixes:
d8647b79c3b7e ("xfrm: Add user interface for esn and big anti-replay windows")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Desaulniers [Thu, 6 Jul 2017 22:36:50 +0000 (15:36 -0700)]
mm/vmscan.c: fix unsequenced modification and access warning
commit
f2f43e566a02a3bdde0a65e6a2e88d707c212a29 upstream.
Clang and its -Wunsequenced emits a warning
mm/vmscan.c:2961:25: error: unsequenced modification and access to 'gfp_mask' [-Wunsequenced]
.gfp_mask = (gfp_mask = current_gfp_context(gfp_mask)),
^
While it is not clear to me whether the initialization code violates the
specification (6.7.8 par 19 (ISO/IEC 9899) looks like it disagrees) the
code is quite confusing and worth cleaning up anyway. Fix this by
reusing sc.gfp_mask rather than the updated input gfp_mask parameter.
Link: http://lkml.kernel.org/r/20170510154030.10720-1-nick.desaulniers@gmail.com
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[natechancellor: Adjust context due to abscence of
7dea19f9ee63]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Fri, 19 May 2017 17:09:32 +0000 (10:09 -0700)]
selinux: Remove redundant check for unknown labeling behavior
commit
270e8573145a26de924e2dc644596332d400445b upstream.
The check is already performed in ocontext_read() when the policy is
loaded. Removing the array also fixes the following warning when
building with clang:
security/selinux/hooks.c:338:20: error: variable 'labeling_behaviors'
is not needed and will not be emitted
[-Werror,-Wunneeded-internal-declaration]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Desaulniers [Thu, 3 Aug 2017 18:03:58 +0000 (11:03 -0700)]
arm64: avoid overflow in VA_START and PAGE_OFFSET
commit
82cd588052815eb4146f9f7c5347ca5e32c56360 upstream.
The bitmask used to define these values produces overflow, as seen by
this compiler warning:
arch/arm64/kernel/head.S:47:8: warning:
integer overflow in preprocessor expression
#elif (PAGE_OFFSET & 0x1fffff) != 0
^~~~~~~~~~~
arch/arm64/include/asm/memory.h:52:46: note:
expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS -
1))
~~~~~~~~~~~~~~~~~~ ^
It would be preferrable to use GENMASK_ULL() instead, but it's not set
up to be used from assembly (the UL() macro token pastes UL suffixes
when not included in assembly sources).
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Yury Norov <ynorov@caviumnetworks.com>
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 27 Jul 2017 21:30:23 +0000 (14:30 -0700)]
btrfs: Remove extra parentheses from condition in copy_items()
commit
0dde10bed2c44a4024eb446cc72fe4e0cb97ec06 upstream.
There is no need for the extra pair of parentheses, remove it. This
fixes the following warning when building with clang:
fs/btrfs/tree-log.c:3694:10: warning: equality comparison with extraneous
parentheses [-Wparentheses-equality]
if ((i == (nr - 1)))
~~^~~~~~~~~~~
Also remove the unnecessary parentheses around the substraction.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Mon, 17 Apr 2017 20:59:53 +0000 (13:59 -0700)]
mac80211: ibss: Fix channel type enum in ieee80211_sta_join_ibss()
commit
a4ac6f2e53e568a77a2eb3710efd99ca08634c0a upstream.
cfg80211_chandef_create() expects an 'enum nl80211_channel_type' as
channel type however in ieee80211_sta_join_ibss()
NL80211_CHAN_WIDTH_20_NOHT is passed in two occasions, which is of
the enum type 'nl80211_chan_width'. Change the value to NL80211_CHAN_NO_HT
(20 MHz, non-HT channel) of the channel type enum.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 6 Apr 2017 23:31:41 +0000 (16:31 -0700)]
mac80211: Fix clang warning about constant operand in logical operation
commit
93f56de259376d7e4fff2b2d104082e1fa66e237 upstream.
When clang detects a non-boolean constant in a logical operation it
generates a 'constant-logical-operand' warning. In
ieee80211_try_rate_control_ops_get() the result of strlen(<const str>)
is used in a logical operation, clang resolves the expression to an
(integer) constant at compile time when clang's builtin strlen function
is used.
Change the condition to check for strlen() > 0 to make the constant
operand boolean and thus avoid the warning.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Wed, 19 Apr 2017 18:39:20 +0000 (11:39 -0700)]
netfilter: ctnetlink: Make some parameters integer to avoid enum mismatch
commit
a2b7cbdd2559aff06cebc28a7150f81c307a90d3 upstream.
Not all parameters passed to ctnetlink_parse_tuple() and
ctnetlink_exp_dump_tuple() match the enum type in the signatures of these
functions. Since this is intended change the argument type of to be an
unsigned integer value.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Praznik [Wed, 8 Feb 2017 18:58:43 +0000 (13:58 -0500)]
HID: sony: Use LED_CORE_SUSPENDRESUME
commit
765a1077c85e5f2efcc43582f80caf43a052e903 upstream.
The LED subsystem provides the LED_CORE_SUSPENDRESUME flag to handle
automatically turning off and restoring the state of device LEDs during
suspend/resume. Use this flag instead of saving and restoring the state
locally.
Signed-off-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 13 Apr 2017 17:05:04 +0000 (10:05 -0700)]
cfg80211: Fix array-bounds warning in fragment copy
commit
aa1702dd162f420bf85ecef0c77686ef0dbc1496 upstream.
__ieee80211_amsdu_copy_frag intentionally initializes a pointer to
array[-1] to increment it later to valid values. clang rightfully
generates an array-bounds warning on the initialization statement.
Initialize the pointer to array[0] and change the algorithm from
increment before to increment after consume.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Mon, 17 Apr 2017 22:59:52 +0000 (15:59 -0700)]
nl80211: Fix enum type of variable in nl80211_put_sta_rate()
commit
bbf67e450a5dc2a595e1e7a67b4869f1a7f5a338 upstream.
rate_flg is of type 'enum nl80211_attrs', however it is assigned with
'enum nl80211_rate_info' values. Change the type of rate_flg accordingly.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 1 Feb 2017 16:46:02 +0000 (17:46 +0100)]
xgene_enet: remove bogus forward declarations
commit
1f3d62090d3ba4d0c14e5271be87812fc577b197 upstream.
The device match tables for both the xgene_enet driver and its phy driver
have forward declarations that declare an array without a length, leading
to a clang warning when they are not followed by an actual defitinition:
drivers/net/ethernet/apm/xgene/../../../phy/mdio-xgene.h:135:34: warning: tentative array definition assumed to have one element
drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element
The declarations for the mdio driver are even in a header file, so they
cause duplicate definitions of the tables for each file that includes
them.
This removes all four forward declarations and moves the actual
definitions up a little, so they are in front of their first user. For
the OF match tables, this means having to remove the #ifdef around them,
and passing the actual structure into of_match_device(). This has no
effect on the generated object code though, as the of_match_device
function has an empty stub that does not evaluate its argument, and
the symbol gets dropped either way.
Fixes:
43b3cf6634a4 ("drivers: net: phy: xgene: Add MDIO driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Agner [Mon, 17 Apr 2017 03:12:50 +0000 (20:12 -0700)]
usb: gadget: remove redundant self assignment
commit
8a8b161df5ce06ef5a315899f83978e765be09e8 upstream.
The assignment ret = ret is redundant and can be removed.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Fri, 2 Jun 2017 21:46:16 +0000 (14:46 -0700)]
frv: declare jiffies to be located in the .data section
commit
60b0a8c3d2480f3b57282b47b7cae7ee71c48635 upstream.
Commit
7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with
____cacheline_aligned_in_smp") removed a section specification from the
jiffies declaration that caused conflicts on some platforms.
Unfortunately this change broke the build for frv:
kernel/built-in.o: In function `__do_softirq': (.text+0x6460): relocation truncated to fit: R_FRV_GPREL12 against symbol
`jiffies' defined in *ABS* section in .tmp_vmlinux1
kernel/built-in.o: In function `__do_softirq': (.text+0x6574): relocation truncated to fit: R_FRV_GPREL12 against symbol
`jiffies' defined in *ABS* section in .tmp_vmlinux1
kernel/built-in.o: In function `pwq_activate_delayed_work': workqueue.c:(.text+0x15b9c): relocation truncated to fit: R_FRV_GPREL12 against
symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1
...
Add __jiffy_arch_data to the declaration of jiffies and use it on frv to
include the section specification. For all other platforms
__jiffy_arch_data (currently) has no effect.
Fixes:
7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp")
Link: http://lkml.kernel.org/r/20170516221333.177280-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Mon, 8 May 2017 22:55:05 +0000 (15:55 -0700)]
jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp
commit
7c30f352c852bae2715ad65ac4a38ca9af7d7696 upstream.
jiffies_64 is defined in kernel/time/timer.c with
____cacheline_aligned_in_smp, however this macro is not part of the
declaration of jiffies and jiffies_64 in jiffies.h.
As a result clang generates the following warning:
kernel/time/timer.c:57:26: error: section does not match previous declaration [-Werror,-Wsection]
__visible u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
^
include/linux/cache.h:39:36: note: expanded from macro '__cacheline_aligned_in_smp'
^
include/linux/cache.h:34:4: note: expanded from macro '__cacheline_aligned'
__section__(".data..cacheline_aligned")))
^
include/linux/jiffies.h:77:12: note: previous attribute is here
extern u64 __jiffy_data jiffies_64;
^
include/linux/jiffies.h:70:38: note: expanded from macro '__jiffy_data'
Link: http://lkml.kernel.org/r/20170403190200.70273-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Michael Davidson <md@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Charlebois [Fri, 28 Apr 2017 22:15:12 +0000 (15:15 -0700)]
fs: compat: Remove warning from COMPATIBLE_IOCTL
commit
9280cdd6fe5b8287a726d24cc1d558b96c8491d7 upstream.
cmd in COMPATIBLE_IOCTL is always a u32, so cast it so there isn't a
warning about an overflow in XFORM.
From: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 16 Mar 2017 22:26:52 +0000 (15:26 -0700)]
selinux: Remove unnecessary check of array base in selinux_set_mapping()
commit
342e91578eb6909529bc7095964cd44b9c057c4e upstream.
'perms' will never be NULL since it isn't a plain pointer but an array
of u32 values.
This fixes the following warning when building with clang:
security/selinux/ss/services.c:158:16: error: address of array
'p_in->perms' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]
while (p_in->perms && p_in->perms[k]) {
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Wed, 12 Apr 2017 18:20:29 +0000 (11:20 -0700)]
cpumask: Add helper cpumask_available()
commit
f7e30f01a9e221067bb4b579e3cfc25cd2617467 upstream.
With CONFIG_CPUMASK_OFFSTACK=y cpumask_var_t is a struct cpumask
pointer, otherwise a struct cpumask array with a single element.
Some code dealing with cpumasks needs to validate that a cpumask_var_t
is not a NULL pointer when CONFIG_CPUMASK_OFFSTACK=y. This is typically
done by performing the check always, regardless of the underlying type
of cpumask_var_t. This works in both cases, however clang raises a
warning like this when CONFIG_CPUMASK_OFFSTACK=n:
kernel/irq/manage.c:839:28: error: address of array
'desc->irq_common_data.affinity' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]
Add the inline helper cpumask_available() which only performs the
pointer check if CONFIG_CPUMASK_OFFSTACK=y.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Michael Davidson <md@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170412182030.83657-1-mka@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Wed, 12 Apr 2017 18:20:30 +0000 (11:20 -0700)]
genirq: Use cpumask_available() for check of cpumask variable
commit
d170fe7dd992b313d4851ae5ab77ee7a51ed8c72 upstream.
This fixes the following clang warning when CONFIG_CPUMASK_OFFSTACK=n:
kernel/irq/manage.c:839:28: error: address of array
'desc->irq_common_data.affinity' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Michael Davidson <md@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170412182030.83657-2-mka@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Desaulniers [Fri, 11 Aug 2017 18:16:07 +0000 (11:16 -0700)]
netfilter: nf_nat_h323: fix logical-not-parentheses warning
commit
eee6ebbac18a189ef33d25ea9b8bcae176515e49 upstream.
Clang produces the following warning:
net/ipv4/netfilter/nf_nat_h323.c:553:6: error:
logical not is only applied to the left hand side of this comparison
[-Werror,-Wlogical-not-parentheses]
if (!set_h225_addr(skb, protoff, data, dataoff, taddr,
^
add parentheses after the '!' to evaluate the comparison first
add parentheses around left hand side expression to silence this warning
There's not necessarily a bug here, but it's cleaner to return early,
ex:
if (x)
return
...
rather than:
if (x == 0)
...
else
return
Also added a return code check that seemed to be missing in one
instance.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Desaulniers [Sun, 25 Jun 2017 05:50:12 +0000 (22:50 -0700)]
Input: mousedev - fix implicit conversion warning
commit
dae1a432ab1fe79ae53129ededeaece35a2dc14d upstream.
Clang warns:
drivers/input/mousedev.c:653:63: error: implicit conversion from 'int'
to 'signed char' changes value from 200 to -56
[-Wconstant-conversion]
client->ps2[1] = 0x60; client->ps2[2] = 3; client->ps2[3] = 200;
~ ^~~
As the PS2 data is really a stream of bytes, let's switch to using u8 type
for it, which silences this warning.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Mon, 17 Apr 2017 18:05:03 +0000 (11:05 -0700)]
dm ioctl: remove double parentheses
commit
e36215d87f301f9567c8c99fd34e6c3521a94ddf upstream.
The extra pair of parantheses is not needed and causes clang to generate
warnings about the DM_DEV_CREATE_CMD comparison in validate_params().
Also remove another double parentheses that doesn't cause a warning.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Fri, 14 Apr 2017 20:38:02 +0000 (13:38 -0700)]
PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant
commit
76dc52684d0f72971d9f6cc7d5ae198061b715bd upstream.
A 64-bit value is not needed since a PCI ROM address consists in 32 bits.
This fixes a clang warning about "implicit conversion from 'unsigned long'
to 'u32'".
Also remove now unnecessary casts to u32 from __pci_read_base() and
pci_std_update_resource().
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Thu, 25 May 2017 10:38:17 +0000 (19:38 +0900)]
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
commit
c93f5cf571e7795f97d49ef51b766cf25e328545 upstream.
Fix kprobes to set(recover) RWX bits correctly on trampoline
buffer before releasing it. Releasing readonly page to
module_memfree() crash the kernel.
Without this fix, if kprobes user register a bunch of kprobes
in function body (since kprobes on function entry usually
use ftrace) and unregister it, kernel hits a BUG and crash.
Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
d0381c81c2f7 ("kprobes/x86: Set kprobes pages read-only")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Narron [Wed, 10 Jan 2018 16:12:16 +0000 (09:12 -0700)]
partitions/msdos: Unable to mount UFS 44bsd partitions
commit
5f15684bd5e5ef39d4337988864fec8012471dda upstream.
UFS partitions from newer versions of FreeBSD 10 and 11 use relative
addressing for their subpartitions. But older versions of FreeBSD still
use absolute addressing just like OpenBSD and NetBSD.
Instead of simply testing for a FreeBSD partition, the code needs to
also test if the starting offset of the C subpartition is zero.
https://bugzilla.kernel.org/show_bug.cgi?id=197733
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Fri, 23 Mar 2018 05:53:38 +0000 (15:53 +1000)]
powerpc/64s: Fix i-side SLB miss bad address handler saving nonvolatile GPRs
commit
52396500f97c53860164debc7d4f759077853423 upstream.
The SLB bad address handler's trap number fixup does not preserve the
low bit that indicates nonvolatile GPRs have not been saved. This
leads save_nvgprs to skip saving them, and subsequent functions and
return from interrupt will think they are saved.
This causes kernel branch-to-garbage debugging to not have correct
registers, can also cause userspace to have its registers clobbered
after a segfault.
Fixes:
f0f558b131db ("powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Wed, 21 Mar 2018 02:22:28 +0000 (12:22 +1000)]
powerpc/64s: Fix lost pending interrupt due to race causing lost update to irq_happened
commit
ff6781fd1bb404d8a551c02c35c70cec1da17ff1 upstream.
force_external_irq_replay() can be called in the do_IRQ path with
interrupts hard enabled and soft disabled if may_hard_irq_enable() set
MSR[EE]=1. It updates local_paca->irq_happened with a load, modify,
store sequence. If a maskable interrupt hits during this sequence, it
will go to the masked handler to be marked pending in irq_happened.
This update will be lost when the interrupt returns and the store
instruction executes. This can result in unpredictable latencies,
timeouts, lockups, etc.
Fix this by ensuring hard interrupts are disabled before modifying
irq_happened.
This could cause any maskable asynchronous interrupt to get lost, but
it was noticed on P9 SMP system doing RDMA NVMe target over 100GbE,
so very high external interrupt rate and high IPI rate. The hang was
bisected down to enabling doorbell interrupts for IPIs. These provided
an interrupt type that could run at high rates in the do_IRQ path,
stressing the race.
Fixes:
1d607bb3bd60 ("powerpc/irq: Add mechanism to force a replay of interrupts")
Cc: stable@vger.kernel.org # v4.8+
Reported-by: Carol L. Soto <clsoto@us.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Wed, 28 Mar 2018 23:01:01 +0000 (16:01 -0700)]
ipc/shm.c: add split function to shm_vm_ops
commit
3d942ee079b917b24e2a0c5f18d35ac8ec9fee48 upstream.
If System V shmget/shmat operations are used to create a hugetlbfs
backed mapping, it is possible to munmap part of the mapping and split
the underlying vma such that it is not huge page aligned. This will
untimately result in the following BUG:
kernel BUG at /build/linux-jWa1Fv/linux-4.15.0/mm/hugetlb.c:3310!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: kcm nfc af_alg caif_socket caif phonet fcrypt
CPU: 18 PID: 43243 Comm: trinity-subchil Tainted: G C E 4.15.0-10-generic #11-Ubuntu
NIP:
c00000000036e764 LR:
c00000000036ee48 CTR:
0000000000000009
REGS:
c000003fbcdcf810 TRAP: 0700 Tainted: G C E (4.15.0-10-generic)
MSR:
9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
24002222 XER:
20040000
CFAR:
c00000000036ee44 SOFTE: 1
NIP __unmap_hugepage_range+0xa4/0x760
LR __unmap_hugepage_range_final+0x28/0x50
Call Trace:
0x7115e4e00000 (unreliable)
__unmap_hugepage_range_final+0x28/0x50
unmap_single_vma+0x11c/0x190
unmap_vmas+0x94/0x140
exit_mmap+0x9c/0x1d0
mmput+0xa8/0x1d0
do_exit+0x360/0xc80
do_group_exit+0x60/0x100
SyS_exit_group+0x24/0x30
system_call+0x58/0x6c
---[ end trace
ee88f958a1c62605 ]---
This bug was introduced by commit
31383c6865a5 ("mm, hugetlbfs:
introduce ->split() to vm_operations_struct"). A split function was
added to vm_operations_struct to determine if a mapping can be split.
This was mostly for device-dax and hugetlbfs mappings which have
specific alignment constraints.
Mappings initiated via shmget/shmat have their original vm_ops
overwritten with shm_vm_ops. shm_vm_ops functions will call back to the
original vm_ops if needed. Add such a split function to shm_vm_ops.
Link: http://lkml.kernel.org/r/20180321161314.7711-1-mike.kravetz@oracle.com
Fixes:
31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Fri, 16 Mar 2018 03:22:29 +0000 (11:22 +0800)]
ceph: only dirty ITER_IOVEC pages for direct read
commit
85784f9395987a422fa04263e7c0fb13da11eb5c upstream.
If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Tue, 27 Mar 2018 01:39:07 +0000 (15:39 -1000)]
perf/hwbp: Simplify the perf-hwbp code, fix documentation
commit
f67b15037a7a50c57f72e69a6d59941ad90a0f0f upstream.
Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the
modification of a breakpoint - simplify it and remove the pointless
local variables.
Also update the stale Docbook while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 27 Mar 2018 13:07:52 +0000 (16:07 +0300)]
ALSA: pcm: potential uninitialized return values
commit
5607dddbfca774fb38bffadcb077fe03aa4ac5c6 upstream.
Smatch complains that "tmp" can be uninitialized if we do a zero size
write.
Fixes:
02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Roese [Mon, 26 Mar 2018 14:10:21 +0000 (16:10 +0200)]
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
commit
9066ae7ff5d89c0b5daa271e2d573540097a94fa upstream.
When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer
will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB
area, as the page offset is outside of the VMA range (size), which is
currently used as size parameter in snd_pcm_lib_default_mmap(). By
using the DMA buffer size (dma_bytes) instead, the complete DMA buffer
can be mmapp'ed and the issue is fixed.
This issue was detected on an ARM platform (TI AM57xx) using the RME
HDSP MADI PCIe soundcard.
Fixes:
657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available")
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nobutaka Okabe [Fri, 23 Mar 2018 10:49:44 +0000 (19:49 +0900)]
ALSA: usb-audio: Add native DSD support for TEAC UD-301
commit
b00214865d65100163574ba250008f182cf90869 upstream.
Add native DSD support quirk for TEAC UD-301 DAC,
by adding the PID/VID 0644:804a.
Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Sat, 3 Mar 2018 22:29:03 +0000 (23:29 +0100)]
mtd: jedec_probe: Fix crash in jedec_read_mfr()
commit
87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 upstream.
It turns out that the loop where we read manufacturer
jedec_read_mfd() can under some circumstances get a
CFI_MFR_CONTINUATION repeatedly, making the loop go
over all banks and eventually hit the end of the
map and crash because of an access violation:
Unable to handle kernel paging request at virtual address
c4980000
pgd = (ptrval)
[
c4980000] *pgd=
03808811, *pte=
00000000, *ppte=
00000000
Internal error: Oops: 7 [#1] PREEMPT ARM
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150
Hardware name: Gemini (Device Tree)
PC is at jedec_probe_chip+0x6ec/0xcd0
LR is at 0x4
pc : [<
c03a2bf4>] lr : [<
00000004>] psr:
60000013
sp :
c382dd18 ip :
0000ffff fp :
00000000
r10:
c0626388 r9 :
00020000 r8 :
c0626340
r7 :
00000000 r6 :
00000001 r5 :
c3a71afc r4 :
c382dd70
r3 :
00000001 r2 :
c4900000 r1 :
00000002 r0 :
00080000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
0000397f Table:
00004000 DAC:
00000053
Process swapper (pid: 1, stack limit = 0x(ptrval))
Fix this by breaking the loop with a return 0 if
the offset exceeds the map size.
Fixes:
5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0")
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Mon, 22 Jan 2018 11:20:26 +0000 (12:20 +0100)]
ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[]
commit
1328f02005bbbaed15b9d5b7f3ab5ec9d4d5268a upstream.
Commit
384b38b66947 ("ARM: 7873/1: vfp: clear vfp_current_hw_state
for dying cpu") fixed the cpu dying notifier by clearing
vfp_current_hw_state[]. However commit
e5b61bafe704 ("arm: Convert VFP
hotplug notifiers to state machine") incorrectly used the original
vfp_force_reload() function in the cpu dying notifier.
Fix it by going back to clearing vfp_current_hw_state[].
Fixes:
e5b61bafe704 ("arm: Convert VFP hotplug notifiers to state machine")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 31 Mar 2018 16:11:36 +0000 (18:11 +0200)]
Linux 4.9.92
Yunsheng Lin [Thu, 6 Jul 2017 02:22:00 +0000 (10:22 +0800)]
net: hns: Fix a skb used after free bug
commit
27463ad99f738ed93c7c8b3e2e5bc8c4853a2ff2 upstream.
skb maybe freed in hns_nic_net_xmit_hw() and return NETDEV_TX_OK,
which cause hns_nic_net_xmit to use a freed skb.
BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x62c/0x940...
[17659.112635] alloc_debug_processing+0x18c/0x1a0
[17659.117208] __slab_alloc+0x52c/0x560
[17659.120909] kmem_cache_alloc_node+0xac/0x2c0
[17659.125309] __alloc_skb+0x6c/0x260
[17659.128837] tcp_send_ack+0x8c/0x280
[17659.132449] __tcp_ack_snd_check+0x9c/0xf0
[17659.136587] tcp_rcv_established+0x5a4/0xa70
[17659.140899] tcp_v4_do_rcv+0x27c/0x620
[17659.144687] tcp_prequeue_process+0x108/0x170
[17659.149085] tcp_recvmsg+0x940/0x1020
[17659.152787] inet_recvmsg+0x124/0x180
[17659.156488] sock_recvmsg+0x64/0x80
[17659.160012] SyS_recvfrom+0xd8/0x180
[17659.163626] __sys_trace_return+0x0/0x4
[17659.167506] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=23 cpu=1 pid=13
[17659.174000] free_debug_processing+0x1d4/0x2c0
[17659.178486] __slab_free+0x240/0x390
[17659.182100] kmem_cache_free+0x24c/0x270
[17659.186062] kfree_skbmem+0xa0/0xb0
[17659.189587] __kfree_skb+0x28/0x40
[17659.193025] napi_gro_receive+0x168/0x1c0
[17659.197074] hns_nic_rx_up_pro+0x58/0x90
[17659.201038] hns_nic_rx_poll_one+0x518/0xbc0
[17659.205352] hns_nic_common_poll+0x94/0x140
[17659.209576] net_rx_action+0x458/0x5e0
[17659.213363] __do_softirq+0x1b8/0x480
[17659.217062] run_ksoftirqd+0x64/0x80
[17659.220679] smpboot_thread_fn+0x224/0x310
[17659.224821] kthread+0x150/0x170
[17659.228084] ret_from_fork+0x10/0x40
BUG: KASAN: use-after-free in hns_nic_net_xmit+0x8c/0xc0...
[17751.080490] __slab_alloc+0x52c/0x560
[17751.084188] kmem_cache_alloc+0x244/0x280
[17751.088238] __build_skb+0x40/0x150
[17751.091764] build_skb+0x28/0x100
[17751.095115] __alloc_rx_skb+0x94/0x150
[17751.098900] __napi_alloc_skb+0x34/0x90
[17751.102776] hns_nic_rx_poll_one+0x180/0xbc0
[17751.107097] hns_nic_common_poll+0x94/0x140
[17751.111333] net_rx_action+0x458/0x5e0
[17751.115123] __do_softirq+0x1b8/0x480
[17751.118823] run_ksoftirqd+0x64/0x80
[17751.122437] smpboot_thread_fn+0x224/0x310
[17751.126575] kthread+0x150/0x170
[17751.129838] ret_from_fork+0x10/0x40
[17751.133454] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=19 cpu=7 pid=43
[17751.139951] free_debug_processing+0x1d4/0x2c0
[17751.144436] __slab_free+0x240/0x390
[17751.148051] kmem_cache_free+0x24c/0x270
[17751.152014] kfree_skbmem+0xa0/0xb0
[17751.155543] __kfree_skb+0x28/0x40
[17751.159022] napi_gro_receive+0x168/0x1c0
[17751.163074] hns_nic_rx_up_pro+0x58/0x90
[17751.167041] hns_nic_rx_poll_one+0x518/0xbc0
[17751.171358] hns_nic_common_poll+0x94/0x140
[17751.175585] net_rx_action+0x458/0x5e0
[17751.179373] __do_softirq+0x1b8/0x480
[17751.183076] run_ksoftirqd+0x64/0x80
[17751.186691] smpboot_thread_fn+0x224/0x310
[17751.190826] kthread+0x150/0x170
[17751.194093] ret_from_fork+0x10/0x40
Fixes:
13ac695e7ea1 ("net:hns: Add support of Hip06 SoC to the Hislicon Network Subsystem")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Reported-by: Jun He <hjat2005@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Erick Reyes <erickreyes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Herbert [Tue, 13 Mar 2018 19:01:43 +0000 (12:01 -0700)]
kcm: lock lower socket in kcm_attach
[ Upstream commit
2cc683e88c0c993ac3721d9b702cb0630abe2879 ]
Need to lock lower socket in order to provide mutual exclusion
with kcm_unattach.
v2: Add Reported-by for syzbot
Fixes:
ab7ac4eb9832e32a09f4e804 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+ea75c0ffcd353d32515f064aaebefc5279e6161e@syzkaller.appspotmail.com
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Tue, 13 Mar 2018 21:45:07 +0000 (14:45 -0700)]
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
[ Upstream commit
484d802d0f2f29c335563fcac2a8facf174a1bbc ]
There is no need for complex checking between the last consumed index
and current consumed index, a simple subtraction will do.
This also eliminates the possibility of a permanent transmit queue stall
under the following conditions:
- one CPU bursts ring->size worth of traffic (up to 256 buffers), to the
point where we run out of free descriptors, so we stop the transmit
queue at the end of bcm_sysport_xmit()
- because of our locking, we have the transmit process disable
interrupts which means we can be blocking the TX reclamation process
- when TX reclamation finally runs, we will be computing the difference
between ring->c_index (last consumed index by SW) and what the HW
reports through its register
- this register is masked with (ring->size - 1) = 0xff, which will lead
to stripping the upper bits of the index (register is 16-bits wide)
- we will be computing last_tx_cn as 0, which means there is no work to
be done, and we never wake-up the transmit queue, leaving it
permanently disabled
A practical example is e.g: ring->c_index aka last_c_index = 12, we
pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12,
so last_tx_cn == 0, nothing happens.
Fixes:
80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Tue, 20 Mar 2018 06:59:15 +0000 (07:59 +0100)]
s390/qeth: on channel error, reject further cmd requests
[ Upstream commit
a6c3d93963e4b333c764fde69802c3ea9eaa9d5c ]
When the IRQ handler determines that one of the cmd IO channels has
failed and schedules recovery, block any further cmd requests from
being submitted. The request would inevitably stall, and prevent the
recovery from making progress until the request times out.
This sort of error was observed after Live Guest Relocation, where
the pending IO on the READ channel intentionally gets terminated to
kick-start recovery. Simultaneously the guest executed SIOCETHTOOL,
triggering qeth to issue a QUERY CARD INFO command. The command
then stalled in the inoperabel WRITE channel.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Tue, 20 Mar 2018 06:59:14 +0000 (07:59 +0100)]
s390/qeth: lock read device while queueing next buffer
[ Upstream commit
17bf8c9b3d499d5168537c98b61eb7a1fcbca6c2 ]
For calling ccw_device_start(), issue_next_read() needs to hold the
device's ccwlock.
This is satisfied for the IRQ handler path (where qeth_irq() gets called
under the ccwlock), but we need explicit locking for the initial call by
the MPC initialization.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Tue, 20 Mar 2018 06:59:13 +0000 (07:59 +0100)]
s390/qeth: when thread completes, wake up all waiters
[ Upstream commit
1063e432bb45be209427ed3f1ca3908e4aa3c7d7 ]
qeth_wait_for_threads() is potentially called by multiple users, make
sure to notify all of them after qeth_clear_thread_running_bit()
adjusted the thread_running_mask. With no timeout, callers would
otherwise stall.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Tue, 20 Mar 2018 06:59:12 +0000 (07:59 +0100)]
s390/qeth: free netdevice when removing a card
[ Upstream commit
6be687395b3124f002a653c1a50b3260222b3cd7 ]
On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:
qeth_core_remove_device(card)
lx_remove_device(card)
unregister_netdev(card->dev)
card->dev = NULL !!!
qeth_core_free_card(card)
if (card->dev) !!!
free_netdev(card->dev)
Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.
Note that free_netdev() takes care of the netif_napi_del() for us too.
Fixes:
4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madalin Bucur [Wed, 14 Mar 2018 13:37:28 +0000 (08:37 -0500)]
soc/fsl/qbman: fix issue in qman_delete_cgr_safe()
[ Upstream commit
96f413f47677366e0ae03797409bfcc4151dbf9e ]
The wait_for_completion() call in qman_delete_cgr_safe()
was triggering a scheduling while atomic bug, replacing the
kthread with a smp_call_function_single() call to fix it.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arkadi Sharshevsky [Thu, 8 Mar 2018 10:42:10 +0000 (12:42 +0200)]
team: Fix double free in error path
[ Upstream commit
cbcc607e18422555db569b593608aec26111cb0b ]
The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.
The current code tries to release the skb in case of failure which
causes redundant freeing.
Fixes:
9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vinicius Costa Gomes [Wed, 14 Mar 2018 20:32:09 +0000 (13:32 -0700)]
skbuff: Fix not waking applications when errors are enqueued
[ Upstream commit
6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ]
When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.
Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt <randy.e.witt@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Fri, 16 Feb 2018 19:03:03 +0000 (11:03 -0800)]
net: Only honor ifindex in IP_PKTINFO if non-0
[ Upstream commit
2cbb4ea7de167b02ffa63e9cdfdb07a7e7094615 ]
Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings
if the index is actually set in the message.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Dichtel [Wed, 14 Mar 2018 20:10:23 +0000 (21:10 +0100)]
netlink: avoid a double skb free in genlmsg_mcast()
[ Upstream commit
02a2385f37a7c6594c9d89b64c4a1451276f08eb ]
nlmsg_multicast() consumes always the skb, thus the original skb must be
freed only when this function is called with a clone.
Fixes:
cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arvind Yadav [Tue, 13 Mar 2018 15:50:06 +0000 (16:50 +0100)]
net/iucv: Free memory obtained by kzalloc
[ Upstream commit
fa6a91e9b907231d2e38ea5ed89c537b3525df3d ]
Free memory by calling put_device(), if afiucv_iucv_init is not
successful.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sun, 18 Mar 2018 19:49:51 +0000 (12:49 -0700)]
net: fec: Fix unbalanced PM runtime calls
[ Upstream commit
a069215cf5985f3aa1bba550264907d6bd05c5f7 ]
When unbinding/removing the driver, we will run into the following warnings:
[ 259.655198] fec
400d1000.ethernet:
400d1000.ethernet supply phy not found, using dummy regulator
[ 259.665065] fec
400d1000.ethernet: Unbalanced pm_runtime_enable!
[ 259.672770] fec
400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[ 259.683062] fec
400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[ 259.696239] libphy: fec_enet_mii_bus: probed
Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SZ Lin (林上智) [Thu, 15 Mar 2018 16:56:01 +0000 (00:56 +0800)]
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
[ Upstream commit
f9db50691db4a7d860fce985f080bb3fc23a7ede ]
According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and
DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only
available when PHY is configured in RGMII mode with 10Mbps speed. It will
cause some networking issues without RGMII mode, such as carrier sense
errors and low throughput. TI also mentioned this issue in their forum[4].
This patch adds the check mechanism for PHY interface with RGMII interface
type, the in-band mode can only be set in RGMII mode with 10Mbps speed.
References:
[1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf
[2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf
[3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf
[4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155
Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Schuyler Patton <spatton@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sun, 18 Mar 2018 22:59:36 +0000 (23:59 +0100)]
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
[ Upstream commit
00777fac28ba3e126b9e63e789a613e8bd2cab25 ]
If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.
Fixes:
6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 6 Mar 2018 15:54:53 +0000 (07:54 -0800)]
l2tp: do not accept arbitrary sockets
[ Upstream commit
17cfe79a65f98abe535261856c5aef14f306dff7 ]
syzkaller found an issue caused by lack of sufficient checks
in l2tp_tunnel_create()
RAW sockets can not be considered as UDP ones for instance.
In another patch, we shall replace all pr_err() by less intrusive
pr_debug() so that syzkaller can find other bugs faster.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>
==================================================================
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
dst_release: dst:
00000000d53d0d0f refcnt:-1
Write of size 1 at addr
ffff8801d013b798 by task syz-executor3/6242
CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23b/0x360 mm/kasan/report.c:412
__asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435
setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596
pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707
SYSC_connect+0x213/0x4a0 net/socket.c:1640
SyS_connect+0x24/0x30 net/socket.c:1621
do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes:
fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Bianconi [Thu, 8 Mar 2018 16:00:02 +0000 (17:00 +0100)]
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
[ Upstream commit
9f62c15f28b0d1d746734666d88a79f08ba1e43e ]
Fix the following slab-out-of-bounds kasan report in
ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not
linear and the accessed data are not in the linear data region of orig_skb.
[ 1503.122508] ==================================================================
[ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990
[ 1503.123036] Read of size 1184 at addr
ffff8800298ab6b0 by task netperf/1932
[ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124
[ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[ 1503.123527] Call Trace:
[ 1503.123579] <IRQ>
[ 1503.123638] print_address_description+0x6e/0x280
[ 1503.123849] kasan_report+0x233/0x350
[ 1503.123946] memcpy+0x1f/0x50
[ 1503.124037] ndisc_send_redirect+0x94e/0x990
[ 1503.125150] ip6_forward+0x1242/0x13b0
[...]
[ 1503.153890] Allocated by task 1932:
[ 1503.153982] kasan_kmalloc+0x9f/0xd0
[ 1503.154074] __kmalloc_track_caller+0xb5/0x160
[ 1503.154198] __kmalloc_reserve.isra.41+0x24/0x70
[ 1503.154324] __alloc_skb+0x130/0x3e0
[ 1503.154415] sctp_packet_transmit+0x21a/0x1810
[ 1503.154533] sctp_outq_flush+0xc14/0x1db0
[ 1503.154624] sctp_do_sm+0x34e/0x2740
[ 1503.154715] sctp_primitive_SEND+0x57/0x70
[ 1503.154807] sctp_sendmsg+0xaa6/0x1b10
[ 1503.154897] sock_sendmsg+0x68/0x80
[ 1503.154987] ___sys_sendmsg+0x431/0x4b0
[ 1503.155078] __sys_sendmsg+0xa4/0x130
[ 1503.155168] do_syscall_64+0x171/0x3f0
[ 1503.155259] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 1503.155436] Freed by task 1932:
[ 1503.155527] __kasan_slab_free+0x134/0x180
[ 1503.155618] kfree+0xbc/0x180
[ 1503.155709] skb_release_data+0x27f/0x2c0
[ 1503.155800] consume_skb+0x94/0xe0
[ 1503.155889] sctp_chunk_put+0x1aa/0x1f0
[ 1503.155979] sctp_inq_pop+0x2f8/0x6e0
[ 1503.156070] sctp_assoc_bh_rcv+0x6a/0x230
[ 1503.156164] sctp_inq_push+0x117/0x150
[ 1503.156255] sctp_backlog_rcv+0xdf/0x4a0
[ 1503.156346] __release_sock+0x142/0x250
[ 1503.156436] release_sock+0x80/0x180
[ 1503.156526] sctp_sendmsg+0xbb0/0x1b10
[ 1503.156617] sock_sendmsg+0x68/0x80
[ 1503.156708] ___sys_sendmsg+0x431/0x4b0
[ 1503.156799] __sys_sendmsg+0xa4/0x130
[ 1503.156889] do_syscall_64+0x171/0x3f0
[ 1503.156980] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 1503.157158] The buggy address belongs to the object at
ffff8800298ab600
which belongs to the cache kmalloc-1024 of size 1024
[ 1503.157444] The buggy address is located 176 bytes inside of
1024-byte region [
ffff8800298ab600,
ffff8800298aba00)
[ 1503.157702] The buggy address belongs to the page:
[ 1503.157820] page:
ffffea0000a62a00 count:1 mapcount:0 mapping:
0000000000000000 index:0x0 compound_mapcount: 0
[ 1503.158053] flags: 0x4000000000008100(slab|head)
[ 1503.158171] raw:
4000000000008100 0000000000000000 0000000000000000 00000001800e000e
[ 1503.158350] raw:
dead000000000100 dead000000000200 ffff880036002600 0000000000000000
[ 1503.158523] page dumped because: kasan: bad access detected
[ 1503.158698] Memory state around the buggy address:
[ 1503.158816]
ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.158988]
ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.159165] >
ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1503.159338] ^
[ 1503.159436]
ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159610]
ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159785] ==================================================================
[ 1503.159964] Disabling lock debugging due to kernel taint
The test scenario to trigger the issue consists of 4 devices:
- H0: data sender, connected to LAN0
- H1: data receiver, connected to LAN1
- GW0 and GW1: routers between LAN0 and LAN1. Both of them have an
ethernet connection on LAN0 and LAN1
On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for
data from LAN0 to LAN1.
Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent
data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send
buffer size is set to 16K). While data streams are active flush the route
cache on HA multiple times.
I have not been able to identify a given commit that introduced the issue
since, using the reproducer described above, the kasan report has been
triggered from 4.14 and I have not gone back further.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Kodanev [Tue, 6 Mar 2018 19:57:01 +0000 (22:57 +0300)]
dccp: check sk for closed state in dccp_sendmsg()
[ Upstream commit
67f93df79aeefc3add4e4b31a752600f834236e2 ]
dccp_disconnect() sets 'dp->dccps_hc_tx_ccid' tx handler to NULL,
therefore if DCCP socket is disconnected and dccp_sendmsg() is
called after it, it will cause a NULL pointer dereference in
dccp_write_xmit().
This crash and the reproducer was reported by syzbot. Looks like
it is reproduced if commit
69c64866ce07 ("dccp: CVE-2017-8824:
use-after-free in DCCP code") is applied.
Reported-by: syzbot+f99ab3887ab65d70f816@syzkaller.appspotmail.com
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirill Tkhai [Tue, 6 Mar 2018 15:46:39 +0000 (18:46 +0300)]
net: Fix hlist corruptions in inet_evict_bucket()
[ Upstream commit
a560002437d3646dafccecb1bf32d1685112ddda ]
inet_evict_bucket() iterates global list, and
several tasks may call it in parallel. All of
them hash the same fq->list_evictor to different
lists, which leads to list corruption.
This patch makes fq be hashed to expired list
only if this has not been made yet by another
task. Since inet_frag_alloc() allocates fq
using kmem_cache_zalloc(), we may rely on
list_evictor is initially unhashed.
The problem seems to exist before async
pernet_operations, as there was possible to have
exit method to be executed in parallel with
inet_frags::frags_work, so I add two Fixes tags.
This also may go to stable.
Fixes:
d1fe19444d82 "inet: frag: don't re-use chainlist for evictor"
Fixes:
f84c6821aa54 "net: Convert pernet_subsys, registered from inet_init()"
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 14 Mar 2018 16:04:16 +0000 (09:04 -0700)]
net: use skb_to_full_sk() in skb_update_prio()
[ Upstream commit
4dcb31d4649df36297296b819437709f5407059c ]
Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()
Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()
Also add the const qualifier to sock_cgroup_classid() for consistency.
Fixes:
ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 5 Mar 2018 16:51:03 +0000 (08:51 -0800)]
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
[ Upstream commit
ca0edb131bdf1e6beaeb2b8289fd6b374b74147d ]
A tun device type can trivially be set to arbitrary value using
TUNSETLINK ioctl().
Therefore, lowpan_device_event() must really check that ieee802154_ptr
is not NULL.
Fixes:
2c88b5283f60d ("ieee802154: 6lowpan: remove check on null")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Kodanev [Mon, 5 Mar 2018 17:52:54 +0000 (20:52 +0300)]
sch_netem: fix skb leak in netem_enqueue()
[ Upstream commit
35d889d10b649fda66121891ec05eca88150059d ]
When we exceed current packets limit and we have more than one
segment in the list returned by skb_gso_segment(), netem drops
only the first one, skipping the rest, hence kmemleak reports:
unreferenced object 0xffff880b5d23b600 (size 1024):
comm "softirq", pid 0, jiffies
4384527763 (age 2770.629s)
hex dump (first 32 bytes):
00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00 ..#]............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000d8a19b9d>] __alloc_skb+0xc9/0x520
[<
000000001709b32f>] skb_segment+0x8c8/0x3710
[<
00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830
[<
00000000c921cba1>] inet_gso_segment+0x476/0x1370
[<
000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510
[<
000000002182660a>] __skb_gso_segment+0x1dd/0x620
[<
00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem]
[<
0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120
[<
00000000fc5f7327>] ip_finish_output2+0x998/0xf00
[<
00000000d309e9d3>] ip_output+0x1aa/0x2c0
[<
000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670
[<
0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0
[<
0000000056a44199>] tcp_tasklet_func+0x3d9/0x540
[<
0000000013d06d02>] tasklet_action+0x1ca/0x250
[<
00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3
[<
00000000e7ed027c>] irq_exit+0x1e2/0x210
Fix it by adding the rest of the segments, if any, to skb 'to_free'
list. Add new __qdisc_drop_all() and qdisc_drop_all() functions
because they can be useful in the future if we need to drop segmented
GSO packets in other places.
Fixes:
6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Blakey [Sun, 4 Mar 2018 15:29:48 +0000 (17:29 +0200)]
rhashtable: Fix rhlist duplicates insertion
[ Upstream commit
d3dcf8eb615537526bd42ff27a081d46d337816e ]
When inserting duplicate objects (those with the same key),
current rhlist implementation messes up the chain pointers by
updating the bucket pointer instead of prev next pointer to the
newly inserted node. This causes missing elements on removal and
travesal.
Fix that by properly updating pprev pointer to point to
the correct rhash_head next pointer.
Issue: 1241076
Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7
Fixes:
ca26893f05e8 ('rhashtable: Add rhlist interface')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Tue, 20 Mar 2018 15:49:26 +0000 (16:49 +0100)]
ppp: avoid loop in xmit recursion detection code
[ Upstream commit
6d066734e9f09cdea4a3b9cb76136db3f29cfb02 ]
We already detect situations where a PPP channel sends packets back to
its upper PPP device. While this is enough to avoid deadlocking on xmit
locks, this doesn't prevent packets from looping between the channel
and the unit.
The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq
before checking for xmit recursion. Therefore, __ppp_xmit_process()
might dequeue a packet from ppp->file.xq and send it on the channel
which, in turn, loops it back on the unit. Then ppp_start_xmit()
queues the packet back to ppp->file.xq and __ppp_xmit_process() picks
it up and sends it again through the channel. Therefore, the packet
will loop between __ppp_xmit_process() and ppp_start_xmit() until some
other part of the xmit path drops it.
For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops
the packet after a few iterations. But PPTP reallocates the headroom
if necessary, letting the loop run and exhaust the machine resources
(as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109).
Fix this by letting __ppp_xmit_process() enqueue the skb to
ppp->file.xq, so that we can check for recursion before adding it to
the queue. Now ppp_xmit_process() can drop the packet when recursion is
detected.
__ppp_channel_push() is a bit special. It calls __ppp_xmit_process()
without having any actual packet to send. This is used by
ppp_output_wakeup() to re-enable transmission on the parent unit (for
implementations like ppp_async.c, where the .start_xmit() function
might not consume the skb, leaving it in ppp->xmit_pending and
disabling transmission).
Therefore, __ppp_xmit_process() needs to handle the case where skb is
NULL, dequeuing as many packets as possible from ppp->file.xq.
Reported-by: xu heng <xuheng333@zoho.com>
Fixes:
55454a565836 ("ppp: avoid dealock on recursive xmit")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Mashak [Mon, 12 Mar 2018 20:20:58 +0000 (16:20 -0400)]
net sched actions: return explicit error when tunnel_key mode is not specified
[ Upstream commit
51d4740f88affd85d49c04e3c9cd129c0e33bcb9 ]
If set/unset mode of the tunnel_key action is not provided, ->init() still
returns 0, and the caller proceeds with bogus 'struct tc_action *' object,
this results in crash:
% tc actions add action tunnel_key src_ip 1.1.1.1 dst_ip 2.2.2.1 id 7 index 1
[ 35.805515] general protection fault: 0000 [#1] SMP PTI
[ 35.806161] Modules linked in: act_tunnel_key kvm_intel kvm irqbypass
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64
crypto_simd glue_helper cryptd serio_raw
[ 35.808233] CPU: 1 PID: 428 Comm: tc Not tainted 4.16.0-rc4+ #286
[ 35.808929] RIP: 0010:tcf_action_init+0x90/0x190
[ 35.809457] RSP: 0018:
ffffb8edc068b9a0 EFLAGS:
00010206
[ 35.810053] RAX:
1320c000000a0003 RBX:
0000000000000001 RCX:
0000000000000000
[ 35.810866] RDX:
0000000000000070 RSI:
0000000000007965 RDI:
ffffb8edc068b910
[ 35.811660] RBP:
ffffb8edc068b9d0 R08:
0000000000000000 R09:
ffffb8edc068b808
[ 35.812463] R10:
ffffffffc02bf040 R11:
0000000000000040 R12:
ffffb8edc068bb38
[ 35.813235] R13:
0000000000000000 R14:
0000000000000000 R15:
ffffb8edc068b910
[ 35.814006] FS:
00007f3d0d8556c0(0000) GS:
ffff91d1dbc40000(0000)
knlGS:
0000000000000000
[ 35.814881] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 35.815540] CR2:
000000000043f720 CR3:
0000000019248001 CR4:
00000000001606a0
[ 35.816457] Call Trace:
[ 35.817158] tc_ctl_action+0x11a/0x220
[ 35.817795] rtnetlink_rcv_msg+0x23d/0x2e0
[ 35.818457] ? __slab_alloc+0x1c/0x30
[ 35.819079] ? __kmalloc_node_track_caller+0xb1/0x2b0
[ 35.819544] ? rtnl_calcit.isra.30+0xe0/0xe0
[ 35.820231] netlink_rcv_skb+0xce/0x100
[ 35.820744] netlink_unicast+0x164/0x220
[ 35.821500] netlink_sendmsg+0x293/0x370
[ 35.822040] sock_sendmsg+0x30/0x40
[ 35.822508] ___sys_sendmsg+0x2c5/0x2e0
[ 35.823149] ? pagecache_get_page+0x27/0x220
[ 35.823714] ? filemap_fault+0xa2/0x640
[ 35.824423] ? page_add_file_rmap+0x108/0x200
[ 35.825065] ? alloc_set_pte+0x2aa/0x530
[ 35.825585] ? finish_fault+0x4e/0x70
[ 35.826140] ? __handle_mm_fault+0xbc1/0x10d0
[ 35.826723] ? __sys_sendmsg+0x41/0x70
[ 35.827230] __sys_sendmsg+0x41/0x70
[ 35.827710] do_syscall_64+0x68/0x120
[ 35.828195] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 35.828859] RIP: 0033:0x7f3d0ca4da67
[ 35.829331] RSP: 002b:
00007ffc9f284338 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 35.830304] RAX:
ffffffffffffffda RBX:
00007ffc9f284460 RCX:
00007f3d0ca4da67
[ 35.831247] RDX:
0000000000000000 RSI:
00007ffc9f2843b0 RDI:
0000000000000003
[ 35.832167] RBP:
000000005aa6a7a9 R08:
0000000000000001 R09:
0000000000000000
[ 35.833075] R10:
00000000000005f1 R11:
0000000000000246 R12:
0000000000000000
[ 35.833997] R13:
00007ffc9f2884c0 R14:
0000000000000001 R15:
0000000000674640
[ 35.834923] Code: 24 30 bb 01 00 00 00 45 31 f6 eb 5e 8b 50 08 83 c2 07 83 e2
fc 83 c2 70 49 8b 07 48 8b 40 70 48 85 c0 74 10 48 89 14 24 4c 89 ff <ff> d0 48
8b 14 24 48 01 c2 49 01 d6 45 85 ed 74 05 41 83 47 2c
[ 35.837442] RIP: tcf_action_init+0x90/0x190 RSP:
ffffb8edc068b9a0
[ 35.838291] ---[ end trace
a095c06ee4b97a26 ]---
Fixes:
d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>