EDAC, i7core: Fix memleaks and use-after-free on probe and remove

[ Upstream commit 6c974d4dfafe5e9ee754f2a6fba0eb1864f1649e ]

Make sure to free and deregister the addrmatch and chancounts devices
allocated during probe in all error paths. Also fix use-after-free in a
probe error path and in the remove success path where the devices were
being put before before deregistration.

Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 356f0a30860d ("i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy")
Link: http://lkml.kernel.org/r/20180612124335.6420-2-johan@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: Update controller info during resume

[ Upstream commit c3b10a55abc943a526aaecd7e860b15671beb906 ]

There is a possibility that firmware on the controller was upgraded before
system was suspended. During resume, driver needs to read updated
controller properties.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iomap: complete partial direct I/O writes synchronously

[ Upstream commit ebf00be37de35788cad72f4f20b4a39e30c0be4a ]

According to xfstest generic/240, applications seem to expect direct I/O
writes to either complete as a whole or to fail; short direct I/O writes
are apparently not appreciated.  This means that when only part of an
asynchronous direct I/O write succeeds, we can either fail the entire
write, or we can wait for the partial write to complete and retry the
remaining write as buffered I/O.  The old __blockdev_direct_IO helper
has code for waiting for partial writes to complete; the new
iomap_dio_rw iomap helper does not.

The above mentioned fallback mode is needed for gfs2, which doesn't
allow block allocations under direct I/O to avoid taking cluster-wide
exclusive locks.  As a consequence, an asynchronous direct I/O write to
a file range that contains a hole will result in a short write.  In that
case, wait for the short write to complete to allow gfs2 to recover.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bnx2i: add error handling for ioremap_nocache

[ Upstream commit aa154ea885eb0c2407457ce9c1538d78c95456fa ]

When ioremap_nocache fails, the lack of error-handling code may cause
unexpected results.

This patch adds error-handling code after calling ioremap_nocache.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/lbr: Fix incomplete LBR call stack

[ Upstream commit 0592e57b24e7e05ec1f4c50b9666c013abff7017 ]

LBR has a limited stack size. If a task has a deeper call stack than
LBR's stack size, only the overflowed part is reported. A complete call
stack may not be reconstructed by perf tool.

Current code doesn't access all LBR registers. It only read the ones
below the TOS. The LBR registers above the TOS will be discarded
unconditionally.

When a CALL is captured, the TOS is incremented by 1 , modulo max LBR
stack size. The LBR HW only records the call stack information to the
register which the TOS points to. It will not touch other LBR
registers. So the registers above the TOS probably still store the valid
call stack information for an overflowed call stack, which need to be
reported.

To retrieve complete call stack information, we need to start from TOS,
read all LBR registers until an invalid entry is detected.
0s can be used to detect the invalid entry, because:

 - When a RET is captured, the HW zeros the LBR register which TOS points
   to, then decreases the TOS.
 - The LBR registers are reset to 0 when adding a new LBR event or
   scheduling an existing LBR event.
 - A taken branch at IP 0 is not expected

The context switch code is also modified to save/restore all valid LBR
registers. Furthermore, the LBR registers, which don't have valid call
stack information, need to be reset in restore, because they may be
polluted while swapped out.

Here is a small test program, tchain_deep.
Its call stack is deeper than 32.

 noinline void f33(void)
 {
        int i;

        for (i = 0; i < 10000000;) {
                if (i%2)
                        i++;
                else
                        i++;
        }
 }

 noinline void f32(void)
 {
        f33();
 }

 noinline void f31(void)
 {
        f32();
 }

 ... ...

 noinline void f1(void)
 {
        f2();
 }

 int main()
 {
        f1();
 }

Here is the test result on SKX. The max stack size of SKX is 32.

Without the patch:

 $ perf record -e cycles --call-graph lbr -- ./tchain_deep
 $ perf report --stdio
 #
 # Children      Self  Command      Shared Object     Symbol
 # ........  ........  ...........  ................  .................
 #
   100.00%    99.99%  tchain_deep    tchain_deep       [.] f33
            |
             --99.99%--f30
                       f31
                       f32
                       f33

With the patch:

 $ perf record -e cycles --call-graph lbr -- ./tchain_deep
 $ perf report --stdio
 # Children      Self  Command      Shared Object     Symbol
 # ........  ........  ...........  ................  ..................
 #
    99.99%     0.00%  tchain_deep    tchain_deep       [.] f1
            |
            ---f1
               f2
               f3
               f4
               f5
               f6
               f7
               f8
               f9
               f10
               f11
               f12
               f13
               f14
               f15
               f16
               f17
               f18
               f19
               f20
               f21
               f22
               f23
               f24
               f25
               f26
               f27
               f28
               f29
               f30
               f31
               f32
               f33

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lore.kernel.org/lkml/1528213126-4312-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: boot: fix build rule of vmlinux.its.S

[ Upstream commit 67e09db507db3e1642ddce512a4313d20addd6e5 ]

As Documentation/kbuild/makefile.txt says, it is a typical mistake
to forget the FORCE prerequisite for the rule invoked by if_changed.

Add the FORCE to the prerequisite, but it must be filtered-out from
the files passed to the 'cat' command.  Because this rule generates
.vmlinux.its.S.cmd, vmlinux.its.S must be specified as targets so
that the .cmd file is included.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19097/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-ntrig: add error handling for sysfs_create_group

[ Upstream commit 44d4d51de9a3534a2b63d69efda02a10e66541e4 ]

When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling sysfs_create_group.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: mediatek: Add missing cooling device properties for CPUs

[ Upstream commit 0c7f7a5150023f3c6f0b27c4d4940ce3dfaf62cc ]

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: mvebu: declare asm symbols as character arrays in pmsu.c

[ Upstream commit d0d378ff451a66e486488eec842e507d28145813 ]

With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to
detect buffer overflows.  If src or dest is declared as a char, attempts to
copy more than byte will result in a fortify_panic().

Address this problem in mvebu_setup_boot_addr_wa() by declaring
mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays.  Also remove
a couple addressof operators to avoid "arithmetic on pointer to an
incomplete type" compiler error.

See commit 54a7d50b9205 ("x86: mark kprobe templates as character arrays,
not single characters") for a similar fix.

Fixes "detected buffer overflow in memcpy" error during init on some mvebu
systems (armada-370-xp, armada-375):

(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4)
(mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204)
(mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8)
(do_one_initcall) from (kernel_init_freeable+0x1bc/0x254)
(kernel_init_freeable) from (kernel_init+0x8/0x114)
(kernel_init) from (ret_from_fork+0x14/0x2c)

Signed-off-by: Ethan Tuttle <ethan@ethantuttle.com>
Tested-by: Ethan Tuttle <ethan@ethantuttle.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()

[ Upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1 ]

Otherwise we can get:

WARNING: CPU: 0 PID: 55 at drivers/net/wireless/ti/wlcore/io.h:84

I've only seen this few times with the runtime PM patches enabled
so this one is probably not needed before that. This seems to
work currently based on the current PM implementation timer. Let's
apply this separately though in case others are hitting this issue.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmsmac: fix wrap around in conversion from constant to s16

[ Upstream commit c9a61469fc97672a08b2f798830a55ea6e03dc4a ]

The last value in the log_table wraps around to a negative value
since s16 has a value range of -32768 to 32767. This is not what
the table intends to represent. Use the closest positive value
32767.

This fixes a warning seen with clang:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_qmath.c:216:2: warning:
      implicit conversion from 'int' to 's16' (aka 'short') changes
value from 32768
      to -32768 [-Wconstant-conversion]
        32768
        ^~~~~
1 warning generated.

Fixes: 4c0bfeaae9f9 ("brcmsmac: fix array out-of-bounds access in qm_log10")
Cc: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rndis_wlan: potential buffer overflow in rndis_wlan_auth_indication()

[ Upstream commit ae636fb1554833ee5133ca47bf4b2791b6739c52 ]

This is a static checker fix, not something I have tested.  The issue
is that on the second iteration through the loop, we jump forward by
le32_to_cpu(auth_req->length) bytes.  The problem is that if the length
is more than "buflen" then we end up with a negative "buflen".  A
negative buflen is type promoted to a high positive value and the loop
continues but it's accessing beyond the end of the buffer.

I believe the "auth_req->length" comes from the firmware and if the
firmware is malicious or buggy, you're already toasted so the impact of
this bug is probably not very severe.

Fixes: 030645aceb3d ("rndis_wlan: handle 802.11 indications from device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: transmit queued frames after processing rx packets

[ Upstream commit 3f04950f32d5d592ab4fcaecac2178558a6f7437 ]

When running iperf on ath10k SDIO, TX can stop working:

iperf -c 192.168.1.1 -i 1 -t 20 -w 10K
[  3]  0.0- 1.0 sec  2.00 MBytes  16.8 Mbits/sec
[  3]  1.0- 2.0 sec  3.12 MBytes  26.2 Mbits/sec
[  3]  2.0- 3.0 sec  3.25 MBytes  27.3 Mbits/sec
[  3]  3.0- 4.0 sec   655 KBytes  5.36 Mbits/sec
[  3]  4.0- 5.0 sec  0.00 Bytes  0.00 bits/sec
[  3]  5.0- 6.0 sec  0.00 Bytes  0.00 bits/sec
[  3]  6.0- 7.0 sec  0.00 Bytes  0.00 bits/sec
[  3]  7.0- 8.0 sec  0.00 Bytes  0.00 bits/sec
[  3]  8.0- 9.0 sec  0.00 Bytes  0.00 bits/sec
[  3]  9.0-10.0 sec  0.00 Bytes  0.00 bits/sec
[  3]  0.0-10.3 sec  9.01 MBytes  7.32 Mbits/sec

There are frames in the ieee80211_txq and there are frames that have
been removed from from this queue, but haven't yet been sent on the wire
(num_pending_tx).

When num_pending_tx reaches max_num_pending_tx, we will stop the queues
by calling ieee80211_stop_queues().

As frames that have previously been sent for transmission
(num_pending_tx) are completed, we will decrease num_pending_tx and wake
the queues by calling ieee80211_wake_queue(). ieee80211_wake_queue()
does not call wake_tx_queue, so we might still have frames in the
queue at this point.

While the queues were stopped, the socket buffer might have filled up,
and in order for user space to write more, we need to free the frames
in the queue, since they are accounted to the socket. In order to free
them, we first need to transmit them.

This problem cannot be reproduced on low-latency devices, e.g. pci,
since they call ath10k_mac_tx_push_pending() from
ath10k_htt_txrx_compl_task(). ath10k_htt_txrx_compl_task() is not called
on high-latency devices.
Fix the problem by calling ath10k_mac_tx_push_pending(), after
processing rx packets, just like for low-latency devices, also in the
SDIO case. Since we are calling ath10k_mac_tx_push_pending() directly,
we also need to export it.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix releasing node when enumerating enpoints

[ Upstream commit 367c359aa8637b15ee8df6335c5a29b7623966ec ]

sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put()
when remote is equal to NULL and does nothing when remote has a valid
pointer.

Invert the logic to fix memory leak.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-7-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: xgmiitorgmii: Check phy_driver ready before accessing

[ Upstream commit ab4e6ee578e88a659938db8fbf33720bc048d29c ]

Since a phy_device is added to the global mdio_bus list during
phy_device_register(), but a phy_device's phy_driver doesn't get
attached until phy_probe(). It's possible of_phy_find_device() in
xgmiitorgmii will return a valid phy with a NULL phy_driver. Leading to
a NULL pointer access during the memcpy().

Fixes this Oops:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.40 #1
Hardware name: Xilinx Zynq Platform
task: ce4c8d00 task.stack: ce4ca000
PC is at memcpy+0x48/0x330
LR is at xgmiitorgmii_probe+0x90/0xe8
pc : [<c074bc68>]    lr : [<c0529548>]    psr: 20000013
sp : ce4cbb54  ip : 00000000  fp : ce4cbb8c
r10: 00000000  r9 : 00000000  r8 : c0c49178
r7 : 00000000  r6 : cdc14718  r5 : ce762800  r4 : cdc14710
r3 : 00000000  r2 : 00000054  r1 : 00000000  r0 : cdc14718
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 18c5387d  Table: 0000404a  DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0xce4ca210)
...
[<c074bc68>] (memcpy) from [<c0529548>] (xgmiitorgmii_probe+0x90/0xe8)
[<c0529548>] (xgmiitorgmii_probe) from [<c0526a94>] (mdio_probe+0x28/0x34)
[<c0526a94>] (mdio_probe) from [<c04db98c>] (driver_probe_device+0x254/0x414)
[<c04db98c>] (driver_probe_device) from [<c04dbd58>] (__device_attach_driver+0xac/0x10c)
[<c04dbd58>] (__device_attach_driver) from [<c04d96f4>] (bus_for_each_drv+0x84/0xc8)
[<c04d96f4>] (bus_for_each_drv) from [<c04db5bc>] (__device_attach+0xd0/0x134)
[<c04db5bc>] (__device_attach) from [<c04dbdd4>] (device_initial_probe+0x1c/0x20)
[<c04dbdd4>] (device_initial_probe) from [<c04da8fc>] (bus_probe_device+0x98/0xa0)
[<c04da8fc>] (bus_probe_device) from [<c04d8660>] (device_add+0x43c/0x5d0)
[<c04d8660>] (device_add) from [<c0526cb8>] (mdio_device_register+0x34/0x80)
[<c0526cb8>] (mdio_device_register) from [<c0580b48>] (of_mdiobus_register+0x170/0x30c)
[<c0580b48>] (of_mdiobus_register) from [<c05349c4>] (macb_probe+0x710/0xc00)
[<c05349c4>] (macb_probe) from [<c04dd700>] (platform_drv_probe+0x44/0x80)
[<c04dd700>] (platform_drv_probe) from [<c04db98c>] (driver_probe_device+0x254/0x414)
[<c04db98c>] (driver_probe_device) from [<c04dbc58>] (__driver_attach+0x10c/0x118)
[<c04dbc58>] (__driver_attach) from [<c04d9600>] (bus_for_each_dev+0x8c/0xd0)
[<c04d9600>] (bus_for_each_dev) from [<c04db1fc>] (driver_attach+0x2c/0x30)
[<c04db1fc>] (driver_attach) from [<c04daa98>] (bus_add_driver+0x50/0x260)
[<c04daa98>] (bus_add_driver) from [<c04dc440>] (driver_register+0x88/0x108)
[<c04dc440>] (driver_register) from [<c04dd6b4>] (__platform_driver_register+0x50/0x58)
[<c04dd6b4>] (__platform_driver_register) from [<c0b31248>] (macb_driver_init+0x24/0x28)
[<c0b31248>] (macb_driver_init) from [<c010203c>] (do_one_initcall+0x60/0x1a4)
[<c010203c>] (do_one_initcall) from [<c0b00f78>] (kernel_init_freeable+0x15c/0x1f8)
[<c0b00f78>] (kernel_init_freeable) from [<c0763d10>] (kernel_init+0x18/0x124)
[<c0763d10>] (kernel_init) from [<c0112d74>] (ret_from_fork+0x14/0x20)
Code: ba000002 f5d1f03c f5d1f05c f5d1f07c (e8b151f8)
---[ end trace 3e4ec21905820a1f ]---

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lock

[ Upstream commit 168f75f11fe68455e0d058a818ebccfc329d8685 ]

While debugging driver crashes related to a buggy firmware
crashing under load, I noticed that ath10k_htt_rx_ring_free
could be called without being under lock.  I'm not sure if this
is the root cause of the crash or not, but it seems prudent to
protect it.

Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware
running on 9984 NIC.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: xgmiitorgmii: Check read_status results

[ Upstream commit 8d0752d11312be830c33e84dfd1016e6a47c2938 ]

We're ignoring the result of the attached phy device's read_status().
Return it so we can detect errors.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Add AZX_DCAPS_PM_RUNTIME for AMD Raven Ridge

[ Upstream commit 1adca4b0cd65c14cb8b8c9c257720385869c3d5f ]

This patch can make audio controller in AMD Raven Ridge gets runtime
suspended to D3, to save ~1W power when it's not in use.

Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: tm6000: add error handling for dvb_register_adapter

[ Upstream commit e95d7c6eb94c634852eaa5ff4caf3db05b5d2e86 ]

When dvb_register_adapter fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling dvb_register_adapter.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
[hans.verkuil@cisco.com: use pr_err and fix typo: adater -> adapter]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty: add error handling for pcmcia_loop_config

[ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ]

When pcmcia_loop_config fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling pcmcia_loop_config.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: Fix mmap size validation

[ Upstream commit 8632c614565d0c5fdde527889601c018e97b6384 ]

The ashmem driver did not check that the size/offset of the vma passed
to its .mmap() function was not larger than the ashmem object being
mapped. This could cause mmap() to succeed, even though accessing parts
of the mapping would later fail with a segmentation fault.

Ensure an error is returned by the ashmem_mmap() function if the vma
size is larger than the ashmem object size. This enables safer handling
of the problem in userspace.

Cc: Todd Kjos <tkjos@android.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: omap3isp: zero-initialize the isp cam_xclk{a,b} initial data

[ Upstream commit 2ec7debd44b49927a6e2861521994cc075a389ed ]

The struct clk_init_data init variable is declared in the isp_xclk_init()
function so is an automatic variable allocated in the stack. But it's not
explicitly zero-initialized, so some init fields are left uninitialized.

This causes the data structure to have undefined values that may confuse
the common clock framework when the clock is registered.

For example, the uninitialized .flags field could have the CLK_IS_CRITICAL
bit set, causing the framework to wrongly prepare the clk on registration.
This leads to the isp_xclk_prepare() callback being called, which in turn
calls to the omap3isp_get() function that increments the isp dev refcount.

Since this omap3isp_get() call is unexpected, this leads to an unbalanced
omap3isp_get() call that prevents the requested IRQ to be later enabled,
due the refcount not being 0 when the correct omap3isp_get() call happens.

Fixes: 9b28ee3c9122 ("[media] omap3isp: Use the common clock framework")

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: soc_camera: ov772x: correct setting of banding filter

[ Upstream commit 22216ec41e919682c15345e95928f266e8ba6f9e ]

The banding filter ON/OFF is controlled via bit 5 of COM8 register.  It
is attempted to be enabled in ov772x_set_params() by the following line.

ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);

But this unexpectedly results disabling the banding filter, because the
mask and set bits are exclusive.

On the other hand, ov772x_s_ctrl() correctly sets the bit by:

ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);

The same fix was already applied to non-soc_camera version of ov772x
driver in the commit commit a024ee14cd36 ("media: ov772x: correct setting
of banding filter")

Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: s3c-camif: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power

[ Upstream commit 30ed2b83343bd1e07884ca7355dac70d25ffc158 ]

When the subdevice doesn't provide s_power core ops callback, the
v4l2_subdev_call for s_power returns -ENOIOCTLCMD.  If the subdevice
doesn't have the special handling for its power saving mode, the s_power
isn't required.  So -ENOIOCTLCMD from the v4l2_subdev_call should be
ignored.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: snd-aoa: add of_node_put() in error path

[ Upstream commit 222bce5eb88d1af656419db04bcd84b2419fb900 ]

 Both calls to of_find_node_by_name() and of_get_next_child() return a
node pointer with refcount incremented thus it must be explicidly
decremented here after the last usage. As we are assured to have a
refcounted  np  either from the initial
of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np)
in the while loop if we reached the error code path below, an
x of_node_put(np) is needed.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix-timers: Sanitize overrun handling

[ Upstream commit 78c9c4dfbf8c04883941445a195276bb4bb92c76 ]

The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.

The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.

Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.

Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix-timers: Make forward callback return s64

[ Upstream commit 6fec64e1c92d5c715c6d0f50786daa7708266bde ]

The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.

As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.

Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.

Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: adxl345: convert address field usage in iio_chan_spec

[ Upstream commit 9048f1f18a70a01eaa3c8e7166fdb2538929d780 ]

Currently the address field in iio_chan_spec is filled with an accel
data register address for the corresponding axis.

In preparation for adding calibration offset support, this sets the
address field to the index of accel data registers instead of the actual
register address.

This change makes it easier to access both accel registers and
calibration offset registers with fewer lines of code as these are
located in X-axis, Y-axis, Z-axis order.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: atmel: add module param to avoid using dma

[ Upstream commit efc6362c6f8c1e74b340e2611f1b35e7d557ce7b ]

On a sama5d31 with a Full-HD dual LVDS panel (132MHz pixel clock) NAND
flash accesses have a tendency to cause display disturbances. Add a
module param to disable DMA from the NAND controller, since that fixes
the display problem for me.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/extmem: fix gcc 8 stringop-overflow warning

[ Upstream commit 6b2ddf33baec23dace85bd647e3fc4ac070963e8 ]

arch/s390/mm/extmem.c: In function '__segment_load':
arch/s390/mm/extmem.c:436:2: warning: 'strncat' specified bound 7 equals
source length [-Wstringop-overflow=]
  strncat(seg->res_name, " (DCSS)", 7);

What gcc complains about here is the misuse of strncat function, which
in this case does not limit a number of bytes taken from "src", so it is
in the end the same as strcat(seg->res_name, " (DCSS)");

Keeping in mind that a res_name is 15 bytes, strncat in this case
would overflow the buffer and write 0 into alignment byte between the
fields in the struct. To avoid that increasing res_name size to 16,
and reusing strlcat.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/scm_blk: correct numa_node in scm_blk_dev_setup

[ Upstream commit d642d6262f4fcfa5d200ec6e218c17f0c15b3390 ]

The numa_node field of the tag_set struct has to be explicitly
initialized, otherwise it stays as 0, which is a valid numa node id and
cause memory allocation failure if node 0 is offline.

Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: correct numa_node in dasd_alloc_queue

[ Upstream commit b17e3abb0af404cb62ad4ef1a5962f58b06e2b78 ]

The numa_node field of the tag_set struct has to be explicitly
initialized, otherwise it stays as 0, which is a valid numa node id and
cause memory allocation failure if node 0 is offline.

Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alarmtimer: Prevent overflow for relative nanosleep

[ Upstream commit 5f936e19cc0ef97dbe3a56e9498922ad5ba1edef ]

Air Icy reported:

  UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7
  signed integer overflow:
  1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int'
  Call Trace:
   alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811
   __do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline]
   __se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline]
   __x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213
   do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290

alarm_timer_nsleep() uses ktime_add() to add the current time and the
relative expiry value. ktime_add() has no sanity checks so the addition
can overflow when the relative timeout is large enough.

Use ktime_add_safe() which has the necessary sanity checks in place and
limits the result to the valid range.

Fixes: 9a7adcf5c6de ("timers: Posix interface for alarm-timers")
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/sysinfo: add missing #ifdef CONFIG_PROC_FS

[ Upstream commit 9f35b818a2f90fb6cb291aa0c9f835d4f0974a9a ]

Get rid of this compile warning for !PROC_FS:

  CC      arch/s390/kernel/sysinfo.o
arch/s390/kernel/sysinfo.c:275:12: warning: 'sysinfo_show' defined but not used [-Wunused-function]
 static int sysinfo_show(struct seq_file *m, void *v)

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/ioda2: Reduce upper limit for DMA window size

[ Upstream commit d3d4ffaae439981e1e441ebb125aa3588627c5d8 ]

We use PHB in mode1 which uses bit 59 to select a correct DMA window.
However there is mode2 which uses bits 59:55 and allows up to 32 DMA
windows per a PE.

Even though documentation does not clearly specify that, it seems that
the actual hardware does not support bits 59:55 even in mode1, in other
words we can create a window as big as 1<<58 but DMA simply won't work.

This reduces the upper limit from 59 to 55 bits to let the userspace know
about the hardware limits.

Fixes: 7aafac11e3 "powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: sdio: set skb len for all rx packets

[ Upstream commit 8530b4e7b22bc3bd8240579f3844c73947cd5f71 ]

Without this, packets larger than 1500 will silently be dropped.
Easily reproduced by sending a ping packet with a size larger
than 1500.

Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: sdio: use same endpoint id for all packets in a bundle

[ Upstream commit 679e1f07c86221b7183dd69df7068fd42d0041f6 ]

All packets in a bundle should use the same endpoint id as the
first lookahead.

This matches how things are done is ath6kl, however,
this patch can theoretically handle several bundles
in ath10k_sdio_mbox_rx_process_packets().

Without this patch we get lots of errors about invalid endpoint id:

ath10k_sdio mmc2:0001:1: invalid endpoint in look-ahead: 224
ath10k_sdio mmc2:0001:1: failed to get pending recv messages: -12
ath10k_sdio mmc2:0001:1: failed to process pending SDIO interrupts: -12

Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: wusbcore: security: cast sizeof to int for comparison

[ Upstream commit d3ac5598c5010a8999978ebbcca3b1c6188ca36b ]

Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result.  usb_get_descriptor can return a
negative error code.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
int x;
expression e,e1;
identifier f;
@@

*x = f(...);
... when != x = e1
    when != if (x < 0 || ...) { ... return ...; }
*x < sizeof(e)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion

[ Upstream commit 36d4cb460bcbe2a1323732a6e4bb9dd783284368 ]

The approach for adding a device to the devices_idr data structure and for
removing it is as follows:

* &dev->dev_group.cg_item is initialized before a device is added to
  devices_idr.

* If the reference count of a device drops to zero then
  target_free_device() removes the device from devices_idr.

* All devices_idr manipulations are protected by device_mutex.

This means that increasing the reference count of a device is sufficient to
prevent removal from devices_idr and also that it is safe access
dev_group.cg_item for any device that is referenced by devices_idr. Use
this to modify target_find_device() and target_for_each_device() such that
these functions no longer introduce a dependency between device_mutex and
the configfs root inode mutex.

Note: it is safe to pass a NULL pointer to config_item_put() and also to
config_item_get_unless_zero().

This patch prevents that lockdep reports the following complaint:

======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc1-dbg+ #1 Not tainted
------------------------------------------------------
rmdir/12053 is trying to acquire lock:
 (device_mutex#2){+.+.+.}, at: [<ffffffffa010afce>]
target_free_device+0xae/0xf0 [target_core_mod]

but task is already holding lock:
 (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
       lock_acquire+0x59/0x80
       down_write+0x36/0x70
       configfs_depend_item+0x3a/0xb0 [configfs]
       target_depend_item+0x13/0x20 [target_core_mod]
       target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod]
       target_devices_idr_iter+0x16/0x20 [target_core_mod]
       idr_for_each+0x39/0xc0
       target_for_each_device+0x36/0x50 [target_core_mod]
       target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod]
       target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod]
       process_one_work+0x1ca/0x3f0
       worker_thread+0x49/0x3b0
       kthread+0x109/0x140
       ret_from_fork+0x31/0x40

-> #0 (device_mutex#2){+.+.+.}:
       __lock_acquire+0x101f/0x11d0
       lock_acquire+0x59/0x80
       __mutex_lock+0x7e/0x950
       mutex_lock_nested+0x16/0x20
       target_free_device+0xae/0xf0 [target_core_mod]
       target_core_dev_release+0x10/0x20 [target_core_mod]
       config_item_put+0x6e/0xb0 [configfs]
       configfs_rmdir+0x1a6/0x300 [configfs]
       vfs_rmdir+0xb7/0x140
       do_rmdir+0x1f4/0x200
       SyS_rmdir+0x11/0x20
       entry_SYSCALL_64_fastpath+0x23/0xc2

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sb->s_type->i_mutex_key#14);
                               lock(device_mutex#2);
                               lock(&sb->s_type->i_mutex_key#14);
  lock(device_mutex#2);

 *** DEADLOCK ***

3 locks held by rmdir/12053:
 #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff811e223f>]
mnt_want_write+0x1f/0x50
 #1:  (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811cb97e>]
do_rmdir+0x15e/0x200
 #2:  (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

stack backtrace:
CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x86/0xcf
 print_circular_bug+0x1c7/0x220
 __lock_acquire+0x101f/0x11d0
 lock_acquire+0x59/0x80
 __mutex_lock+0x7e/0x950
 mutex_lock_nested+0x16/0x20
 target_free_device+0xae/0xf0 [target_core_mod]
 target_core_dev_release+0x10/0x20 [target_core_mod]
 config_item_put+0x6e/0xb0 [configfs]
 configfs_rmdir+0x1a6/0x300 [configfs]
 vfs_rmdir+0xb7/0x140
 do_rmdir+0x1f4/0x200
 SyS_rmdir+0x11/0x20
 entry_SYSCALL_64_fastpath+0x23/0xc2

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
[Rebased to handle conflict withe target_find_device removal]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvscsi: Improve strings handling

[ Upstream commit 1262dc09dc9ae7bf4ad00b6a2c5ed6a6936bcd10 ]

Currently an open firmware property is copied into partition_name variable
without keeping a room for \0.

Later one, this variable (partition_name), which is 97 bytes long, is
strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is
96 bytes long, possibly truncating it 'again' and removing the \0.

This patch simply decreases the partition name to 96 and just copy using
strlcpy() which guarantees that the string is \0 terminated. I think there
is no issue if this there is a truncation in this very first copy, i.e,
when the open firmware property is read and copied into the driver for the
very first time;

This issue also causes the following warning on GCC 8:

drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning:  strncpy  output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation]
...
inlined from  ibmvscsi_probe  at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7:
drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning:  strncpy  specified bound 97 equals destination size [-Wstringop-truncation]

CC: Bart Van Assche <bart.vanassche@wdc.com>
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: klist: Make it safe to use klists in atomic context

[ Upstream commit 624fa7790f80575a4ec28fbdb2034097dc18d051 ]

In the scsi_transport_srp implementation it cannot be avoided to
iterate over a klist from atomic context when using the legacy block
layer instead of blk-mq. Hence this patch that makes it safe to use
klists in atomic context. This patch avoids that lockdep reports the
following:

WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&q->__queue_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&q->__queue_lock)->rlock);

stack backtrace:
Workqueue: kblockd blk_timeout_work
Call Trace:
 dump_stack+0xa4/0xf5
 check_usage+0x6e6/0x700
 __lock_acquire+0x185d/0x1b50
 lock_acquire+0xd2/0x260
 _raw_spin_lock+0x32/0x50
 klist_next+0x47/0x190
 device_for_each_child+0x8e/0x100
 srp_timed_out+0xaf/0x1d0 [scsi_transport_srp]
 scsi_times_out+0xd4/0x410 [scsi_mod]
 blk_rq_timed_out+0x36/0x70
 blk_timeout_work+0x1b5/0x220
 process_one_work+0x4fe/0xad0
 worker_thread+0x63/0x5a0
 kthread+0x1c1/0x1e0
 ret_from_fork+0x24/0x30

See also commit c9ddf73476ff ("scsi: scsi_transport_srp: Fix shost to
rport translation").

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size

[ Upstream commit 35bea5c84fd13c643cce63f0b5cd4b148f8c901d ]

Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: ls1021a: Add missing cooling device properties for CPUs

[ Upstream commit 47768f372eae030db6fab5225f9504a820d2c07f ]

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Add two more instruction suffixes

[ Upstream commit 6709812f094d96543b443645c68daaa32d3d3e77 ]

Sadly, other than claimed in:

  a368d7fd2a ("x86/entry/64: Add instruction suffix")

... there are two more instances which want to be adjusted.

As said there, omitting suffixes from instructions in AT&T mode is bad
practice when operand size cannot be determined by the assembler from
register operands, and is likely going to be warned about by upstream
gas in the future (mine does already).

Add the other missing suffixes here as well.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5B3A02DD02000078001CFB78@prv1-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled

[ Upstream commit 6d609b35c815ba20132b7b64bcca04516bb17c56 ]

When the RTC lock and unlock functions were introduced it was likely
assumed that they would always be called from irq enabled context, hence
the use of local_irq_disable/enable. This is no longer true as the
RTC+DDR path makes a late call during the suspend path after irqs
have been disabled to enable the RTC hwmod which calls both unlock and
lock, leading to IRQs being reenabled through the local_irq_enable call
in omap_hwmod_rtc_lock call.

To avoid this change the local_irq_disable/enable to
local_irq_save/restore to ensure that from whatever context this is
called the proper IRQ configuration is maintained.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tsc: Add missing header to tsc_msr.c

[ Upstream commit dbd0fbc76c77daac08ddd245afdcbade0d506e19 ]

Add a missing header otherwise compiler warns about missed prototype:

CC      arch/x86/kernel/tsc_msr.o
arch/x86/kernel/tsc_msr.c:73:15: warning: no previous prototype for ‘cpu_khz_from_msr’ [-Wmissing-prototypes]
   unsigned long cpu_khz_from_msr(void)
                 ^~~~~~~~~~~~~~~~

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Link: https://lkml.kernel.org/r/20180629193113.84425-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: staging/imx: fill vb2_v4l2_buffer field entry

[ Upstream commit a38d4b71cb7a12b65317f4e3d59883a918957719 ]

- fixes gstreamer v4l2src warning:

  0:00:00.716640334  349  0x164f720 WARN  v4l2bufferpool gstv4l2bufferpool.c:1195:gst_v4l2_buffer_pool_dqbuf:<v4l2src0:pool:src> Driver should never set v4l2_buffer.field to ANY

- fixes v4l2-compliance test failure:

  Streaming ioctls:
          test read/write: OK (Not Supported)
              Video Capture:
                  Buffer: 0 Sequence: 0 Field: Any Timestamp: 58.383658s
                  fail: v4l2-test-buffers.cpp(297): g_field() == V4L2_FIELD_ANY

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: fsl-viu: fix error handling in viu_of_probe()

[ Upstream commit 662a99e145661c2b35155cf375044deae9b79896 ]

viu_of_probe() ignores fails in i2c_get_adapter(),
tries to unlock uninitialized mutex on error path.

The patch streamlining the error handling in viu_of_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/kdump: Handle crashkernel memory reservation failure

[ Upstream commit 8950329c4a64c6d3ca0bc34711a1afbd9ce05657 ]

Memory reservation for crashkernel could fail if there are holes around
kdump kernel offset (128M). Fail gracefully in such cases and print an
error message.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: David Gibson <dgibson@redhat.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Test port number before querying type.

[ Upstream commit f1228867adaf8890826f2b59e4caddb1c5cc2df7 ]

rdma_ah_find_type() can reach into ib_device->port_immutable with a
potentially out-of-bounds port number, so check that the port number is
valid first.

Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: exynos4-is: Prevent NULL pointer dereference in __isp_video_try_fmt()

[ Upstream commit 7c1b9a5aeed91bef98988ac0fcf38c8c1f4f9a3a ]

This patch fixes potential NULL pointer dereference as indicated
by the following static checker warning:

drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane()
error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'.

Fixes: 34947b8aebe3: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: type promotion bug in rdma_rw_init_one_mr()

[ Upstream commit c2d7c8ff89b22ddefb1ac2986c0d48444a667689 ]

"nents" is an unsigned int, so if ib_map_mr_sg() returns a negative
error code then it's type promoted to a high unsigned int which is
treated as success.

Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/i40w: Hold read semaphore while looking after VMA

[ Upstream commit 5d9a2b0e28759e319a623da33940dbb3ce952b7d ]

VMA lookup is supposed to be performed while mmap_sem is held.

Fixes: f26c7c83395b ("i40iw: Add 2MB page support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/bnxt_re: Fix a couple off by one bugs

[ Upstream commit 474e5a86067e5f12c97d1db8b170c7f45b53097a ]

The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl().
It has sgid_tbl->max elements.  So the > should be >= to prevent
accessing one element beyond the end of the array.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md-cluster: clear another node's suspend_area after the copy is finished

[ Upstream commit 010228e4a932ca1e8365e3b58c8e1e44c16ff793 ]

When one node leaves cluster or stops the resyncing
(resync or recovery) array, then other nodes need to
call recover_bitmaps to continue the unfinished task.

But we need to clear suspend_area later after other
nodes copy the resync information to their bitmap
(by call bitmap_copy_from_slot). Otherwise, all nodes
could write to the suspend_area even the suspend_area
is not handled by any node, because area_resyncing
returns 0 at the beginning of raid1_write_request.
Which means one node could write suspend_area while
another node is resyncing the same area, then data
could be inconsistent.

So let's clear suspend_area later to avoid above issue
with the protection of bm lock. Also it is straightforward
to clear suspend_area after nodes have copied the resync
info to bitmap.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: remove possible deadlock when unregistering power_supply

[ Upstream commit 3ffa6583e24e1ad1abab836d24bfc9d2308074e5 ]

If a device gets removed right after having registered a power_supply node,
we might enter in a deadlock between the remove call (that has a lock on
the parent device) and the deferred register work.

Allow the deferred register work to exit without taking the lock when
we are in the remove state.

Stack trace on a Ubuntu 16.04:

[16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds.
[16072.109127]       Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu
[16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[16072.109132] kworker/u16:2   D    0  1180      2 0x80000000
[16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work
[16072.109144] Call Trace:
[16072.109152]  __schedule+0x3d6/0x8b0
[16072.109155]  schedule+0x36/0x80
[16072.109158]  schedule_preempt_disabled+0xe/0x10
[16072.109161]  __mutex_lock.isra.2+0x2ab/0x4e0
[16072.109166]  __mutex_lock_slowpath+0x13/0x20
[16072.109168]  ? __mutex_lock_slowpath+0x13/0x20
[16072.109171]  mutex_lock+0x2f/0x40
[16072.109174]  power_supply_deferred_register_work+0x2b/0x50
[16072.109179]  process_one_work+0x15b/0x410
[16072.109182]  worker_thread+0x4b/0x460
[16072.109186]  kthread+0x10c/0x140
[16072.109189]  ? process_one_work+0x410/0x410
[16072.109191]  ? kthread_create_on_node+0x70/0x70
[16072.109194]  ret_from_fork+0x35/0x40
[16072.109199] INFO: task test:2257 blocked for more than 120 seconds.
[16072.109202]       Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu
[16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[16072.109206] test            D    0  2257   2256 0x00000004
[16072.109208] Call Trace:
[16072.109211]  __schedule+0x3d6/0x8b0
[16072.109215]  schedule+0x36/0x80
[16072.109218]  schedule_timeout+0x1f3/0x360
[16072.109221]  ? check_preempt_curr+0x5a/0xa0
[16072.109224]  ? ttwu_do_wakeup+0x1e/0x150
[16072.109227]  wait_for_completion+0xb4/0x140
[16072.109230]  ? wait_for_completion+0xb4/0x140
[16072.109233]  ? wake_up_q+0x70/0x70
[16072.109236]  flush_work+0x129/0x1e0
[16072.109240]  ? worker_detach_from_pool+0xb0/0xb0
[16072.109243]  __cancel_work_timer+0x10f/0x190
[16072.109247]  ? device_del+0x264/0x310
[16072.109250]  ? __wake_up+0x44/0x50
[16072.109253]  cancel_delayed_work_sync+0x13/0x20
[16072.109257]  power_supply_unregister+0x37/0xb0
[16072.109260]  devm_power_supply_release+0x11/0x20
[16072.109263]  release_nodes+0x110/0x200
[16072.109266]  devres_release_group+0x7c/0xb0
[16072.109274]  wacom_remove+0xc2/0x110 [wacom]
[16072.109279]  hid_device_remove+0x6e/0xd0 [hid]
[16072.109284]  device_release_driver_internal+0x158/0x210
[16072.109288]  device_release_driver+0x12/0x20
[16072.109291]  bus_remove_device+0xec/0x160
[16072.109293]  device_del+0x1de/0x310
[16072.109298]  hid_destroy_device+0x27/0x60 [hid]
[16072.109303]  usbhid_disconnect+0x51/0x70 [usbhid]
[16072.109308]  usb_unbind_interface+0x77/0x270
[16072.109311]  device_release_driver_internal+0x158/0x210
[16072.109315]  device_release_driver+0x12/0x20
[16072.109318]  usb_driver_release_interface+0x77/0x80
[16072.109321]  proc_ioctl+0x20f/0x250
[16072.109325]  usbdev_do_ioctl+0x57f/0x1140
[16072.109327]  ? __wake_up+0x44/0x50
[16072.109331]  usbdev_ioctl+0xe/0x20
[16072.109336]  do_vfs_ioctl+0xa4/0x600
[16072.109339]  ? vfs_write+0x15a/0x1b0
[16072.109343]  SyS_ioctl+0x79/0x90
[16072.109347]  entry_SYSCALL_64_fastpath+0x24/0xab
[16072.109349] RIP: 0033:0x7f20da807f47
[16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47
[16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009
[16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010
[16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000
[16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000

Reported-and-tested-by: Richard Hughes <rhughes@redhat.com>
Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes: 7f1a57fdd6cb ("power_supply: Fix possible NULL pointer dereference on early uevent")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: correct allocate_pgste proc_handler callback

[ Upstream commit 5bedf8aa03c28cb8dc98bdd32a41b66d8f7d3eaa ]

Since proc_dointvec does not perform value range control,
proc_dointvec_minmax should be used to limit value range, which is
clearly intended here, as the internal representation of the value:

unsigned int alloc_pgste:1;

In fact it currently works, since we have

      mm->context.alloc_pgste = page_table_allocate_pgste || ...

... since commit 23fefe119ceb5 ("s390/kvm: avoid global config of vm.alloc_pgste=1")

Before that it was

       mm->context.alloc_pgste = page_table_allocate_pgste;

which was broken. That was introduced with commit 0b46e0a3ec0d7 ("s390/kvm:
remove delayed reallocation of page tables for KVM").

Fixes: 0b46e0a3ec0d7 ("s390/kvm: remove delayed reallocation of page tables for KVM")
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/msm: Don't call iommu_device_{,un}link from atomic context

[ Upstream commit 379521462e4add27f3514da8e4ab1fd7a54fe1c7 ]

Fixes the following splat during boot:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
in_atomic(): 1, irqs_disabled(): 128, pid: 77, name: kworker/2:1
4 locks held by kworker/2:1/77:
 #0: (ptrval) ((wq_completion)"events"){+.+.}, at: process_one_work+0x1fc/0x8fc
 #1: (ptrval) (deferred_probe_work){+.+.}, at: process_one_work+0x1fc/0x8fc
 #2: (ptrval) (&dev->mutex){....}, at: __device_attach+0x40/0x178
 #3: (ptrval) (msm_iommu_lock){....}, at: msm_iommu_add_device+0x28/0xcc
irq event stamp: 348
hardirqs last  enabled at (347): [<c049dc18>] kfree+0xe0/0x3c0
hardirqs last disabled at (348): [<c0c35cac>] _raw_spin_lock_irqsave+0x2c/0x68
softirqs last  enabled at (0): [<c0322fd8>] copy_process.part.5+0x280/0x1a68
softirqs last disabled at (0): [<00000000>]   (null)
Preemption disabled at:
[<00000000>]   (null)
CPU: 2 PID: 77 Comm: kworker/2:1 Not tainted 4.17.0-rc5-wt-ath-01075-gaca0516bb4cf #239
Hardware name: Generic DT based system
Workqueue: events deferred_probe_work_func
[<c0314e00>] (unwind_backtrace) from [<c030fc70>] (show_stack+0x20/0x24)
[<c030fc70>] (show_stack) from [<c0c16ad8>] (dump_stack+0xa0/0xcc)
[<c0c16ad8>] (dump_stack) from [<c035a978>] (___might_sleep+0x1f8/0x2d4)
ath10k_sdio mmc2:0001:1: Direct firmware load for ath10k/QCA9377/hw1.0/board-2.bin failed with error -2
[<c035a978>] (___might_sleep) from [<c035aac4>] (__might_sleep+0x70/0xa8)
[<c035aac4>] (__might_sleep) from [<c0c3066c>] (__mutex_lock+0x50/0xb28)
[<c0c3066c>] (__mutex_lock) from [<c0c31170>] (mutex_lock_nested+0x2c/0x34)
ath10k_sdio mmc2:0001:1: board_file api 1 bmi_id N/A crc32 544289f7
[<c0c31170>] (mutex_lock_nested) from [<c052d798>] (kernfs_find_and_get_ns+0x30/0x5c)
[<c052d798>] (kernfs_find_and_get_ns) from [<c0531cc8>] (sysfs_add_link_to_group+0x28/0x58)
[<c0531cc8>] (sysfs_add_link_to_group) from [<c07ef75c>] (iommu_device_link+0x50/0xb4)
[<c07ef75c>] (iommu_device_link) from [<c07f2288>] (msm_iommu_add_device+0xa0/0xcc)
[<c07f2288>] (msm_iommu_add_device) from [<c07ec6d0>] (add_iommu_group+0x3c/0x64)
[<c07ec6d0>] (add_iommu_group) from [<c07f9d40>] (bus_for_each_dev+0x84/0xc4)
[<c07f9d40>] (bus_for_each_dev) from [<c07ec7c8>] (bus_set_iommu+0xd0/0x10c)
[<c07ec7c8>] (bus_set_iommu) from [<c07f1a68>] (msm_iommu_probe+0x5b8/0x66c)
[<c07f1a68>] (msm_iommu_probe) from [<c07feaa8>] (platform_drv_probe+0x60/0xbc)
[<c07feaa8>] (platform_drv_probe) from [<c07fc1fc>] (driver_probe_device+0x30c/0x4cc)
[<c07fc1fc>] (driver_probe_device) from [<c07fc59c>] (__device_attach_driver+0xac/0x14c)
[<c07fc59c>] (__device_attach_driver) from [<c07f9e14>] (bus_for_each_drv+0x68/0xc8)
[<c07f9e14>] (bus_for_each_drv) from [<c07fbd3c>] (__device_attach+0xe4/0x178)
[<c07fbd3c>] (__device_attach) from [<c07fc698>] (device_initial_probe+0x1c/0x20)
[<c07fc698>] (device_initial_probe) from [<c07faee8>] (bus_probe_device+0x98/0xa0)
[<c07faee8>] (bus_probe_device) from [<c07fb4f4>] (deferred_probe_work_func+0x74/0x198)
[<c07fb4f4>] (deferred_probe_work_func) from [<c0348eb4>] (process_one_work+0x2c4/0x8fc)
[<c0348eb4>] (process_one_work) from [<c03497b0>] (worker_thread+0x2c4/0x5cc)
[<c03497b0>] (worker_thread) from [<c0350d10>] (kthread+0x180/0x188)
[<c0350d10>] (kthread) from [<c03010b4>] (ret_from_fork+0x14/0x20)

Fixes: 42df43b36163 ("iommu/msm: Make use of iommu_device_register interface")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6lowpan: iphc: reset mac_header after decompress to fix panic

[ Upstream commit 03bc05e1a4972f73b4eb8907aa373369e825c252 ]

After decompression of 6lowpan socket data, an IPv6 header is inserted
before the existing socket payload.  After this, we reset the
network_header value of the skb to account for the difference in payload
size from prior to decompression + the addition of the IPv6 header.

However, we fail to reset the mac_header value.

Leaving the mac_header value untouched here, can cause a calculation
error in net/packet/af_packet.c packet_rcv() function when an
AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
interface.

On line 2088, the data pointer is moved backward by the value returned
from skb_mac_header().  If skb->data is adjusted so that it is before
the skb->head pointer (which can happen when an old value of mac_header
is left in place) the kernel generates a panic in net/core/skbuff.c
line 1717.

This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
sources for compression and decompression.

Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Acked-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: kobil_sct: fix modem-status error handling

[ Upstream commit a420b5d939ee58f1d950f0ea782834056520aeaa ]

Make sure to return -EIO in case of a short modem-status read request.

While at it, split the debug message to not include the (zeroed)
transfer-buffer content in case of errors.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Add a new Realtek 8723DE ID 0bda:b009

[ Upstream commit 45ae68b8cfc25bdbffc11248001c47ab1b76ff6e ]

Without this patch we cannot turn on the Bluethooth adapter on HP
14-bs007la.

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=b009 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=802.11n WLAN Adapter
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: make sure TLB to be flushed before IOVA freed

[ Upstream commit 3c120143f584360a13614787e23ae2cdcb5e5ccd ]

Although the mapping has already been removed in the page table, it maybe
still exist in TLB. Suppose the freed IOVAs is reused by others before the
flush operation completed, the new user can not correctly access to its
meomory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Fixes: b1516a14657a ('iommu/amd: Implement flush queue')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: vexpress: fix corruption in notifier registration

[ Upstream commit 09bebb1adb21ecd04adf7ccb3b06f73e3a851e93 ]

Vexpress platforms provide two different restart handlers: SYS_REBOOT
that restart the entire system, while DB_RESET only restarts the
daughter board containing the CPU. DB_RESET is overridden by SYS_REBOOT
if it exists.

notifier_chain_register used in register_restart_handler by design
relies on notifiers to be registered once only, however vexpress restart
notifier can get registered twice. When this happen it corrupts list
of notifiers, as result some notifiers can be not called on proper
event, traverse on list can be cycled forever, and second unregister
can access already freed memory.

So far, since this was the only restart handler in the system, no issue
was observed even if the same notifier was registered twice. However
commit 6c5c0d48b686 ("watchdog: sp805: add restart handler") added
support for SP805 restart handlers and since the system under test
contains two vexpress restart and two SP805 watchdog instances, it was
observed that during the boot traversing the restart handler list looped
forever as there's a cycle in that list resulting in boot hang.

This patch fixes the issues by ensuring that the notifier is installed
only once.

Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 46c99ac66222 ("power/reset: vexpress: Register with kernel restart handler")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uwb: hwa-rc: fix memory leak at probe

[ Upstream commit 11b71782c1d10d9bccc31825cf84291cd7588a1e ]

hwarc_probe() allocates memory for hwarc, but does not free it
if uwb_rc_add() or hwarc_get_version() fail.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Stop RX FIFO timer during port shutdown

[ Upstream commit c5a9262fa8bfed0dddc7466ef10fcd292e2af61b ]

The RX FIFO timer may be armed when the port is shut down, hence the
timer function may still be called afterwards.

Fix this race condition by deleting the timer during port shutdown.

Fixes: 039403765e5da3c6 ("serial: sh-sci: SCIFA/B RX FIFO software timeout")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: sram: enable clock before registering regions

[ Upstream commit d5b9653dd2bb7a2b1c8cc783c5d3b607bbb6b271 ]

Make sure to enable the clock before registering regions and exporting
partitions to user space at which point we must be prepared for I/O.

Fixes: ee895ccdf776 ("misc: sram: fix enabled clock leak on error path")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: axp288_charger: Fix initial constant_charge_current value

[ Upstream commit f2a42595f0865886a2d40524b0e9d15600848670 ]

We should look at val which contains the value read from the register,
not ret which is always 0 on a successful read.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: eac53b3664f59 ("power: supply: axp288_charger: Drop platform_data dependency")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: fix missing error check on call to rtsx_write_register

[ Upstream commit c5fae4f4fd28189b1062fb8ef7b21fec37cb8b17 ]

Currently the check on error return from the call to rtsx_write_register
is checking the error status from the previous call. Fix this by adding
in the missing assignment of retval.

Detected by CoverityScan, CID#709877

Fixes: fa590c222fba ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/numa_emulation: Fix emulated-to-physical node mapping

[ Upstream commit 3b6c62f363a19ce82bf378187ab97c9dc01e3927 ]

Without this change the distance table calculation for emulated nodes
may use the wrong numa node and report an incorrect distance.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/153089328103.27680.14778434392225818887.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmci: type promotion bug in qp_host_get_user_memory()

[ Upstream commit 7fb2fd4e25fc1fb10dcb30b5519de257cfeae84c ]

The problem is that if get_user_pages_fast() fails and returns a
negative error code, it gets type promoted to a high positive value and
treated as a success.

Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tsl2550: fix lux1_input error in low light

[ Upstream commit ce054546cc2c26891cefa2f284d90d93b52205de ]

ADC channel 0 photodiode detects both infrared + visible light,
but ADC channel 1 just detects infrared. However, the latter is a bit
more sensitive in that range so complete darkness or low light causes
a error condition in which the chan0 - chan1 is negative that
results in a -EAGAIN.

This patch changes the resulting lux1_input sysfs attribute message from
"Resource temporarily unavailable" to a user-grokable lux value of 0.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ina2xx: avoid kthread_stop() with stale task_struct

[ Upstream commit 7d6cd21d82bacab2d1786fe5e989e4815b75d9a3 ]

When the buffer is enabled for ina2xx driver, a dedicated kthread is
invoked to capture mesurement data.  When the buffer is disabled, the
kthread is stopped.

However if the kthread gets register access errors, it immediately exits
and when the malfunctional buffer is disabled, the stale task_struct
pointer is accessed as there is no kthread to be stopped.

A similar issue in the usbip driver is prevented by kthread_get_run and
kthread_stop_put helpers by increasing usage count of the task_struct.
This change applies the same solution.

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: skcipher - Fix -Wstringop-truncation warnings

[ Upstream commit cefd769fd0192c84d638f66da202459ed8ad63ba ]

As of GCC 9.0.0 the build is reporting warnings like:

    crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’:
    crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation]
      strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>",
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       sizeof(rblkcipher.geniv));
       ~~~~~~~~~~~~~~~~~~~~~~~~~

This means the strnycpy might create a non null terminated string.  Fix this by
explicitly performing '\0' termination.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.73

spi: Fix double IDR allocation with DT aliases

commit 04b2d03a75652bda989de1595048f0501dc0c0a0 upstream.

If the SPI bus number is provided by a DT alias, idr_alloc() is called
twice, leading to:

    WARNING: CPU: 1 PID: 1 at drivers/spi/spi.c:2179 spi_register_controller+0x11c/0x5d8
    couldn't get idr

Fix this by moving the handling of fixed SPI bus numbers up, before the
DT handling code fills in ctlr->bus_num.

Fixes: 1a4327fbf4554d5b ("spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick/nohz: Prevent bogus softirq pending warning

Commit 0a0e0829f990 ("nohz: Fix missing tick reprogram when interrupting an
inline softirq") got backported to stable trees and now causes the NOHZ
softirq pending warning to trigger. It's not an upstream issue as the NOHZ
update logic has been changed there.

The problem is when a softirq disabled section gets interrupted and on
return from interrupt the tick/nohz state is evaluated, which then can
observe pending soft interrupts. These soft interrupts are legitimately
pending because they cannot be processed as long as soft interrupts are
disabled and the interrupted code will correctly process them when soft
interrupts are reenabled.

Add a check for softirqs disabled to the pending check to prevent the
warning.

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reported-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: John Crispin <john@phrozen.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 2d898915ccf4838c ("nohz: Fix missing tick reprogram when interrupting an inline softirq")
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

iw_cxgb4: only allow 1 flush on user qps

commit 308aa2b8f7b7db3332a7d41099fd37851fb793b2 upstream.

Once the qp has been flushed, it cannot be flushed again.  The user qp
flush logic wasn't enforcing it however.  The bug can cause
touch-after-free crashes like:

Unable to handle kernel paging request for data at address 0x000001ec
Faulting instruction address: 0xc008000016069100
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4]
LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
Call Trace:
[c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
[c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4]
[c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core]
[c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core]
[c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm]
[c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm]
[c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm]
[c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm]
[c000000000444da4] __fput+0xe4/0x2f0

So fix flush_qp() to only flush the wq once.

Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: include asm/io.h

commit a3b92ee6fc171d7c9d9b6b829b7fef169210440c upstream.

Fix a build error due to missing virt_to_phys()

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: f0a1bf29d821b ("vmw_balloon: fix inflation with batching")
Cc: stable@vger.kernel.org
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Size bridges before resources allocation

commit 91a2968e245d6ba616db37001fa1a043078b1a65 upstream.

The PCIE I/O and MEM resource allocation mechanism is that root bus
goes through the following steps:

1. Check PCI bridges' range and computes I/O and Mem base/limits.

2. Sort all subordinate devices I/O and MEM resource requirements and
   allocate the resources and writes/updates subordinate devices'
   requirements to PCI bridges I/O and Mem MEM/limits registers.

Currently, PCI Aardvark driver only handles the second step and lacks
the first step, so there is an I/O and MEM resource allocation failure
when using a PCI switch. This commit fixes that by sizing bridges
before doing the resource allocation.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller
driver")
Signed-off-by: Zachary Zhang <zhangzg@marvell.com>
[Thomas: edit commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix vruntime_normalized() for remote non-migration wakeup

commit d0cdb3ce8834332d918fc9c8ff74f8a169ec9abe upstream.

When a task which previously ran on a given CPU is remotely queued to
wake up on that same CPU, there is a period where the task's state is
TASK_WAKING and its vruntime is not normalized. This is not accounted
for in vruntime_normalized() which will cause an error in the task's
vruntime if it is switched from the fair class during this time.

For example if it is boosted to RT priority via rt_mutex_setprio(),
rq->min_vruntime will not be subtracted from the task's vruntime but
it will be added again when the task returns to the fair class. The
task's vruntime will have been erroneously doubled and the effective
priority of the task will be reduced.

Note this will also lead to inflation of all vruntimes since the doubled
vruntime value will become the rq's min_vruntime when other tasks leave
the rq. This leads to repeated doubling of the vruntime and priority
penalty.

Fix this by recognizing a WAKING task's vruntime as normalized only if
sched_remote_wakeup is true. This indicates a migration, in which case
the vruntime would have been normalized in migrate_task_rq_fair().

Based on a similar patch from John Dias <joaodias@google.com>.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Steve Muckle <smuckle@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: John Dias <joaodias@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel de Dios <migueldedios@google.com>
Cc: Morten Rasmussen <Morten.Rasmussen@arm.com>
Cc: Patrick Bellasi <Patrick.Bellasi@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: kernel-team@android.com
Fixes: b5179ac70de8 ("sched/fair: Prepare to fix fairness problems on migration")
Link: http://lkml.kernel.org/r/20180831224217.169476-1-smuckle@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: show test_dummy_encryption mount option in /proc/mounts

commit 338affb548c243d2af25b1ca628e67819350de6b upstream.

When in effect, add "test_dummy_encryption" to _ext4_show_options() so
that it is shown in /proc/mounts and other relevant procfs files.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't mark mmp buffer head dirty

commit fe18d649891d813964d3aaeebad873f281627fbc upstream.

Marking mmp bh dirty before writing it will make writeback
pick up mmp block later and submit a write, we don't want the
duplicate write as kmmpd thread should have full control of
reading and writing the mmp block.
Another reason is we will also have random I/O error on
the writeback request when blk integrity is enabled, because
kmmpd could modify the content of the mmp block(e.g. setting
new seq and time) while the mmp block is under I/O requested
by writeback.

Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix online resizing for bigalloc file systems with a 1k block size

commit 5f8c10936fab2b69a487400f2872902e597dd320 upstream.

An online resize of a file system with the bigalloc feature enabled
and a 1k block size would be refused since ext4_resize_begin() did not
understand s_first_data_block is 0 for all bigalloc file systems, even
when the block size is 1k.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix online resize's handling of a too-small final block group

commit f0a459dec5495a3580f8d784555e6f8f3bf7f263 upstream.

Avoid growing the file system to an extent so that the last block
group is too small to hold all of the metadata that must be stored in
the block group.

This problem can be triggered with the following reproducer:

umount /mnt
mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \
-E resize=1073741824 /tmp/foo.img 128M
mount /tmp/foo.img /mnt
truncate --size 1708M /tmp/foo.img
resize2fs /dev/loop0 295400
umount /mnt
e2fsck -fy /tmp/foo.img

Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: recalucate superblock checksum after updating free blocks/inodes

commit 4274f516d4bc50648a4d97e4f67ecbd7b65cde4a upstream.

When mounting the superblock, ext4_fill_super() calculates the free
blocks and free inodes and stores them in the superblock.  It's not
strictly necessary, since we don't use them any more, but it's nice to
keep them roughly aligned to reality.

Since it's not critical for file system correctness, the code doesn't
call ext4_commit_super().  The problem is that it's in
ext4_commit_super() that we recalculate the superblock checksum.  So
if we're not going to call ext4_commit_super(), we need to call
ext4_superblock_csum_set() to make sure the superblock checksum is
consistent.

Most of the time, this doesn't matter, since we end up calling
ext4_commit_super() very soon thereafter, and definitely by the time
the file system is unmounted.  However, it doesn't work in this
sequence:

mke2fs -Fq -t ext4 /dev/vdc 128M
mount /dev/vdc /vdc
cp xfstests/git-versions /vdc
godown /vdc
umount /vdc
mount /dev/vdc
tune2fs -l /dev/vdc

With this commit, the "tune2fs -l" no longer fails.

Reported-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid arithemetic overflow that can trigger a BUG

commit bcd8e91f98c156f4b1ebcfacae675f9cfd962441 upstream.

A maliciously crafted file system can cause an overflow when the
results of a 64-bit calculation is stored into a 32-bit length
parameter.

https://bugzilla.kernel.org/show_bug.cgi?id=200623

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid divide by zero fault when deleting corrupted inline directories

commit 4d982e25d0bdc83d8c64e66fdeca0b89240b3b85 upstream.

A specially crafted file system can trick empty_inline_dir() into
reading past the last valid entry in a inline directory, and then run
into the end of xattr marker. This will trigger a divide by zero
fault.  Fix this by using the size of the inline directory instead of
dir->i_size.

Also clean up error reporting in __ext4_check_dir_entry so that the
message is clearer and more understandable --- and avoids the division
by zero trap if the size passed in is zero.  (I'm not sure why we
coded it that way in the first place; printing offset % size is
actually more confusing and less useful.)

https://bugzilla.kernel.org/show_bug.cgi?id=200933

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check to make sure the rename(2)'s destination is not freed

commit b50282f3241acee880514212d88b6049fb5039c8 upstream.

If the destination of the rename(2) system call exists, the inode's
link count (i_nlinks) must be non-zero.  If it is, the inode can end
up on the orphan list prematurely, leading to all sorts of hilarity,
including a use-after-free.

https://bugzilla.kernel.org/show_bug.cgi?id=200931

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: vt_ioctl: fix potential Spectre v1

commit e97267cb4d1ee01ca0929638ec0fcbb0904f903d upstream.

vsa.console is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue
'vc_cons' [r]

Fix this by sanitizing vsa.console before using it to index vc_cons

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add new polaris pci id

commit 30f3984ede683b98a4e8096e200df78bf0609b4f upstream.

Add new pci id.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: udl: Destroy framebuffer only if it was initialized

commit fcb74da1eb8edd3a4ef9b9724f88ed709d684227 upstream.

This fixes a NULL pointer dereference that can happen if the UDL
driver is unloaded before the framebuffer is initialized. This can
happen e.g. if the USB device is unplugged right after it was plugged
in.

As explained by Stéphane Marchesin:

It happens when fbdev is disabled (which is the case for Chrome OS).
Even though intialization of the fbdev part is optional (it's done in
udlfb_create which is the callback for fb_probe()), the teardown isn't
optional (udl_driver_unload -> udl_fbdev_cleanup ->
udl_fbdev_destroy).

Note that udl_fbdev_cleanup *tries* to be conditional (you can see it
does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is
always set during udl_fbdev_init.

Cc: stable@vger.kernel.org
Suggested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Fix the "no scaling" case on multi-planar YUV formats

commit 658d8cbd07dae22ccecf49399e18c609c4e85c53 upstream.

When there's no scaling requested ->is_unity should be true no matter
the format.

Also, when no scaling is requested and we have a multi-planar YUV
format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only
set ->x_scaling[0] to VC4_SCALING_PPF.

Doing this fixes an hardly visible artifact (seen when using modetest
and a rather big overlay plane in YUV420).

Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early

commit 79e765ad665da4b8aa7e9c878bd2fef837f6fea5 upstream.

On most systems with ACPI hotplugging support, it seems that we always
receive a hotplug event once we re-enable EC interrupts even if the GPU
hasn't even been resumed yet.

This can cause problems since even though we schedule hpd_work to handle
connector reprobing for us, hpd_work synchronizes on
pm_runtime_get_sync() to wait until the device is ready to perform
reprobing. Since runtime suspend/resume callbacks are disabled before
the PM core calls ->suspend(), any calls to pm_runtime_get_sync() during
this period will grab a runtime PM ref and return immediately with
-EACCES. Because we schedule hpd_work from our ACPI HPD handler, and
hpd_work synchronizes on pm_runtime_get_sync(), this causes us to launch
a connector reprobe immediately even if the GPU isn't actually resumed
just yet. This causes various warnings in dmesg and occasionally, also
prevents some displays connected to the dedicated GPU from coming back
up after suspend. Example:

usb 1-4: USB disconnect, device number 14
usb 1-4.1: USB disconnect, device number 15
WARNING: CPU: 0 PID: 838 at drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h:170 nouveau_dp_detect+0x17e/0x370 [nouveau]
CPU: 0 PID: 838 Comm: kworker/0:6 Not tainted 4.17.14-201.Lyude.bz1477182.V3.fc28.x86_64 #1
Hardware name: LENOVO 20EQS64N00/20EQS64N00, BIOS N1EET77W (1.50 ) 03/28/2018
Workqueue: events nouveau_display_hpd_work [nouveau]
RIP: 0010:nouveau_dp_detect+0x17e/0x370 [nouveau]
RSP: 0018:ffffa15143933cf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8cb4f656c400 RCX: 0000000000000000
RDX: ffffa1514500e4e4 RSI: ffffa1514500e4e4 RDI: 0000000001009002
RBP: ffff8cb4f4a8a800 R08: ffffa15143933cfd R09: ffffa15143933cfc
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8cb4fb57a000
R13: ffff8cb4fb57a000 R14: ffff8cb4f4a8f800 R15: ffff8cb4f656c418
FS:  0000000000000000(0000) GS:ffff8cb51f400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f78ec938000 CR3: 000000073720a003 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? _cond_resched+0x15/0x30
 nouveau_connector_detect+0x2ce/0x520 [nouveau]
 ? _cond_resched+0x15/0x30
 ? ww_mutex_lock+0x12/0x40
 drm_helper_probe_detect_ctx+0x8b/0xe0 [drm_kms_helper]
 drm_helper_hpd_irq_event+0xa8/0x120 [drm_kms_helper]
 nouveau_display_hpd_work+0x2a/0x60 [nouveau]
 process_one_work+0x187/0x340
 worker_thread+0x2e/0x380
 ? pwq_unbound_release_workfn+0xd0/0xd0
 kthread+0x112/0x130
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x35/0x40
Code: 4c 8d 44 24 0d b9 00 05 00 00 48 89 ef ba 09 00 00 00 be 01 00 00 00 e8 e1 09 f8 ff 85 c0 0f 85 b2 01 00 00 80 7c 24 0c 03 74 02 <0f> 0b 48 89 ef e8 b8 07 f8 ff f6 05 51 1b c8 ff 02 0f 84 72 ff
---[ end trace 55d811b38fc8e71a ]---

So, to fix this we attempt to grab a runtime PM reference in the ACPI
handler itself asynchronously. If the GPU is already awake (it will have
normal hotplugging at this point) or runtime PM callbacks are currently
disabled on the device, we drop our reference without updating the
autosuspend delay. We only schedule connector reprobes when we
successfully managed to queue up a resume request with our asynchronous
PM ref.

This also has the added benefit of preventing redundant connector
reprobes from ACPI while the GPU is runtime resumed!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <kherbst@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1477182#c41
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()

commit 6833fb1ec120bf078e1a527c573a09d4de286224 upstream.

It's true we can't resume the device from poll workers in
nouveau_connector_detect(). We can however, prevent the autosuspend
timer from elapsing immediately if it hasn't already without risking any
sort of deadlock with the runtime suspend/resume operations. So do that
instead of entirely avoiding grabbing a power reference.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement

commit d77ef138ff572409ab93d492e5e6c826ee6fb21d upstream.

Turns out this part is my fault for not noticing when reviewing
9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling"). Currently
we call drm_kms_helper_poll_enable() from nouveau_display_hpd_work().
This makes basically no sense however, because that means we're calling
drm_kms_helper_poll_enable() every time we schedule the hotplug
detection work. This is also against the advice mentioned in
drm_kms_helper_poll_enable()'s documentation:

 Note that calls to enable and disable polling must be strictly ordered,
 which is automatically the case when they're only call from
 suspend/resume callbacks.

Of course, hotplugs can't really be ordered. They could even happen
immediately after we called drm_kms_helper_poll_disable() in
nouveau_display_fini(), which can lead to all sorts of issues.

Additionally; enabling polling /after/ we call
drm_helper_hpd_irq_event() could also mean that we'd miss a hotplug
event anyway, since drm_helper_hpd_irq_event() wouldn't bother trying to
probe connectors so long as polling is disabled.

So; simply move this back into nouveau_display_init() again. The race
condition that both of these patches attempted to work around has
already been fixed properly in

  d61a5c106351 ("drm/nouveau: Fix deadlock on runtime suspend")

Fixes: 9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload

commit 2f7ca781fd382cf8dde73ed36dfdd93fd05b3332 upstream.

Currently, there's nothing in nouveau that actually cancels this work
struct. So, cancel it on suspend/unload. Otherwise, if we're unlucky
enough hpd_work might try to keep running up until the system is
suspended.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: Fix deadlocks in nouveau_connector_detect()

commit 3e1a12754d4df5804bfca5dedf09d2ba291bdc2a upstream.

When we disable hotplugging on the GPU, we need to be able to
synchronize with each connector's hotplug interrupt handler before the
interrupt is finally disabled. This can be a problem however, since
nouveau_connector_detect() currently grabs a runtime power reference
when handling connector probing. This will deadlock the runtime suspend
handler like so:

[  861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds.
[  861.483290]       Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  861.486332] kworker/0:2     D    0    61      2 0x80000000
[  861.487044] Workqueue: events nouveau_display_hpd_work [nouveau]
[  861.487737] Call Trace:
[  861.488394]  __schedule+0x322/0xaf0
[  861.489070]  schedule+0x33/0x90
[  861.489744]  rpm_resume+0x19c/0x850
[  861.490392]  ? finish_wait+0x90/0x90
[  861.491068]  __pm_runtime_resume+0x4e/0x90
[  861.491753]  nouveau_display_hpd_work+0x22/0x60 [nouveau]
[  861.492416]  process_one_work+0x231/0x620
[  861.493068]  worker_thread+0x44/0x3a0
[  861.493722]  kthread+0x12b/0x150
[  861.494342]  ? wq_pool_ids_show+0x140/0x140
[  861.494991]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.495648]  ret_from_fork+0x3a/0x50
[  861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds.
[  861.496968]       Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  861.498341] kworker/6:2     D    0   320      2 0x80000080
[  861.499045] Workqueue: pm pm_runtime_work
[  861.499739] Call Trace:
[  861.500428]  __schedule+0x322/0xaf0
[  861.501134]  ? wait_for_completion+0x104/0x190
[  861.501851]  schedule+0x33/0x90
[  861.502564]  schedule_timeout+0x3a5/0x590
[  861.503284]  ? mark_held_locks+0x58/0x80
[  861.503988]  ? _raw_spin_unlock_irq+0x2c/0x40
[  861.504710]  ? wait_for_completion+0x104/0x190
[  861.505417]  ? trace_hardirqs_on_caller+0xf4/0x190
[  861.506136]  ? wait_for_completion+0x104/0x190
[  861.506845]  wait_for_completion+0x12c/0x190
[  861.507555]  ? wake_up_q+0x80/0x80
[  861.508268]  flush_work+0x1c9/0x280
[  861.508990]  ? flush_workqueue_prep_pwqs+0x1b0/0x1b0
[  861.509735]  nvif_notify_put+0xb1/0xc0 [nouveau]
[  861.510482]  nouveau_display_fini+0xbd/0x170 [nouveau]
[  861.511241]  nouveau_display_suspend+0x67/0x120 [nouveau]
[  861.511969]  nouveau_do_suspend+0x5e/0x2d0 [nouveau]
[  861.512715]  nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau]
[  861.513435]  pci_pm_runtime_suspend+0x6b/0x180
[  861.514165]  ? pci_has_legacy_pm_support+0x70/0x70
[  861.514897]  __rpm_callback+0x7a/0x1d0
[  861.515618]  ? pci_has_legacy_pm_support+0x70/0x70
[  861.516313]  rpm_callback+0x24/0x80
[  861.517027]  ? pci_has_legacy_pm_support+0x70/0x70
[  861.517741]  rpm_suspend+0x142/0x6b0
[  861.518449]  pm_runtime_work+0x97/0xc0
[  861.519144]  process_one_work+0x231/0x620
[  861.519831]  worker_thread+0x44/0x3a0
[  861.520522]  kthread+0x12b/0x150
[  861.521220]  ? wq_pool_ids_show+0x140/0x140
[  861.521925]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.522622]  ret_from_fork+0x3a/0x50
[  861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds.
[  861.523977]       Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  861.525349] kworker/6:0     D    0  1329      2 0x80000000
[  861.526073] Workqueue: events nvif_notify_work [nouveau]
[  861.526751] Call Trace:
[  861.527411]  __schedule+0x322/0xaf0
[  861.528089]  schedule+0x33/0x90
[  861.528758]  rpm_resume+0x19c/0x850
[  861.529399]  ? finish_wait+0x90/0x90
[  861.530073]  __pm_runtime_resume+0x4e/0x90
[  861.530798]  nouveau_connector_detect+0x7e/0x510 [nouveau]
[  861.531459]  ? ww_mutex_lock+0x47/0x80
[  861.532097]  ? ww_mutex_lock+0x47/0x80
[  861.532819]  ? drm_modeset_lock+0x88/0x130 [drm]
[  861.533481]  drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper]
[  861.534127]  drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper]
[  861.534940]  nouveau_connector_hotplug+0x98/0x120 [nouveau]
[  861.535556]  nvif_notify_work+0x2d/0xb0 [nouveau]
[  861.536221]  process_one_work+0x231/0x620
[  861.536994]  worker_thread+0x44/0x3a0
[  861.537757]  kthread+0x12b/0x150
[  861.538463]  ? wq_pool_ids_show+0x140/0x140
[  861.539102]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.539815]  ret_from_fork+0x3a/0x50
[  861.540521]
               Showing all locks held in the system:
[  861.541696] 2 locks held by kworker/0:2/61:
[  861.542406]  #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[  861.543071]  #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620
[  861.543814] 1 lock held by khungtaskd/64:
[  861.544535]  #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185
[  861.545160] 3 locks held by kworker/6:2/320:
[  861.545896]  #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620
[  861.546702]  #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620
[  861.547443]  #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau]
[  861.548146] 1 lock held by dmesg/983:
[  861.548889] 2 locks held by zsh/1250:
[  861.549605]  #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40
[  861.550393]  #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870
[  861.551122] 6 locks held by kworker/6:0/1329:
[  861.551957]  #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[  861.552765]  #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620
[  861.553582]  #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper]
[  861.554357]  #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper]
[  861.555227]  #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper]
[  861.556133]  #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm]

[  861.557864] =============================================

[  861.559507] NMI backtrace for cpu 2
[  861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018
[  861.561948] Call Trace:
[  861.562757]  dump_stack+0x8e/0xd3
[  861.563516]  nmi_cpu_backtrace.cold.3+0x14/0x5a
[  861.564269]  ? lapic_can_unplug_cpu.cold.27+0x42/0x42
[  861.565029]  nmi_trigger_cpumask_backtrace+0xa1/0xae
[  861.565789]  arch_trigger_cpumask_backtrace+0x19/0x20
[  861.566558]  watchdog+0x316/0x580
[  861.567355]  kthread+0x12b/0x150
[  861.568114]  ? reset_hung_task_detector+0x20/0x20
[  861.568863]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.569598]  ret_from_fork+0x3a/0x50
[  861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7:
[  861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120
[  861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120
[  861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120
[  861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120
[  861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120
[  861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120
[  861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120
[  861.572428] Kernel panic - not syncing: hung_task: blocked tasks

So: fix this by making it so that normal hotplug handling /only/ happens
so long as the GPU is currently awake without any pending runtime PM
requests. In the event that a hotplug occurs while the device is
suspending or resuming, we can simply defer our response until the GPU
is fully runtime resumed again.

Changes since v4:
- Use a new trick I came up with using pm_runtime_get() instead of the
  hackish junk we had before

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix ocfs2 read block panic

commit 234b69e3e089d850a98e7b3145bd00e9b52b1111 upstream.

While reading block, it is possible that io error return due to underlying
storage issue, in this case, BH_NeedsValidate was left in the buffer head.
Then when reading the very block next time, if it was already linked into
journal, that will trigger the following panic.

[203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342!
[203748.702533] invalid opcode: 0000 [#1] SMP
[203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod
[203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2
[203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015
[203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000
[203748.703088] RIP: 0010:[<ffffffffa05e9f09>]  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.703130] RSP: 0018:ffff88006ff4b818  EFLAGS: 00010206
[203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000
[203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe
[203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0
[203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000
[203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000
[203748.705871] FS:  00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000
[203748.706370] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670
[203748.707124] Stack:
[203748.707371]  ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001
[203748.707885]  0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00
[203748.708399]  00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000
[203748.708915] Call Trace:
[203748.709175]  [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2]
[203748.709680]  [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2]
[203748.710185]  [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2]
[203748.710691]  [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2]
[203748.711204]  [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2]
[203748.711716]  [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2]
[203748.712227]  [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2]
[203748.712737]  [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2]
[203748.713003]  [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2]
[203748.713263]  [<ffffffff8121714b>] vfs_create+0xdb/0x150
[203748.713518]  [<ffffffff8121b225>] do_last+0x815/0x1210
[203748.713772]  [<ffffffff812192e9>] ? path_init+0xb9/0x450
[203748.714123]  [<ffffffff8121bca0>] path_openat+0x80/0x600
[203748.714378]  [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620
[203748.714634]  [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0
[203748.714888]  [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130
[203748.715143]  [<ffffffff81209ffc>] do_sys_open+0x12c/0x220
[203748.715403]  [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180
[203748.715668]  [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190
[203748.715928]  [<ffffffff8120a10e>] SyS_open+0x1e/0x20
[203748.716184]  [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7
[203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10
[203748.717505] RIP  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.717775]  RSP <ffff88006ff4b818>

Joesph ever reported a similar panic.
Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html
Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ubifs: xattr: Don't operate on deleted inodes"

commit f061c1cc404a618858a77aea233fde0aeaad2f2d upstream.

This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52.
UBIFS wants to assert that xattr operations are only issued on files
with positive link count. The said patch made this operations return
-ENOENT for unlinked files such that the asserts will no longer trigger.
This was wrong since xattr operations are perfectly fine on unlinked
files.
Instead the assertions need to be fixed/removed.

Cc: <stable@vger.kernel.org>
Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes")
Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: iscsi: Use bin2hex instead of a re-implementation

commit 8c39e2699f8acb2e29782a834e56306da24937fe upstream.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>