Fang Xiang [Mon, 30 Oct 2023 08:32:56 +0000 (16:32 +0800)]
irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs
[ Upstream commit
d3badb15613c14dd35d3495b1dde5c90fcd616dd ]
In non-coherent GIC designs, the ITS tables must be flushed before writing
to the GITS_BASER<n> registers, otherwise the ITS could read dirty tables,
which results in unpredictable behavior.
Flush the tables right at the begin of its_setup_baser() to prevent that.
[ tglx: Massage changelog ]
Fixes:
a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fang Xiang <fangxiang3@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231030083256.4345-1-fangxiang3@xiaomi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Tue, 28 Nov 2023 21:58:40 +0000 (16:58 -0500)]
NFSD: Fix checksum mismatches in the duplicate reply cache
[ Upstream commit
bf51c52a1f3c238d72c64e14d5e7702d3a245b82 ]
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Tue, 28 Nov 2023 21:58:34 +0000 (16:58 -0500)]
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
[ Upstream commit
1caf5f61dd8430ae5a0b4538afe4953ce7517cbb ]
The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.
But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.
A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.
The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 28 Nov 2023 17:20:18 +0000 (17:20 +0000)]
Linux 6.6.3
Link: https://lore.kernel.org/r/20231124172028.107505484@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20231125163158.249616313@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: SeongJae Park <sj@kernel.org>
Link: https://lore.kernel.org/r/20231125194417.090791215@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20231126154418.032283745@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Nam Cao <namcao@linutronix.de>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lewis Huang [Thu, 19 Oct 2023 09:22:21 +0000 (17:22 +0800)]
drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
commit
5911d02cac70d7fb52009fbd37423e63f8f6f9bc upstream.
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Hsieh [Wed, 25 Oct 2023 02:53:35 +0000 (10:53 +0800)]
drm/amd/display: Clear dpcd_sink_ext_caps if not set
commit
923bbfe6c888812db1088d684bd30c24036226d2 upstream.
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tianci Yin [Wed, 1 Nov 2023 01:47:13 +0000 (09:47 +0800)]
drm/amd/display: Enable fast plane updates on DCN3.2 and above
commit
435f5b369657cffee4b04db1f5805b48599f4dbe upstream.
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Wed, 8 Nov 2023 19:31:57 +0000 (13:31 -0600)]
drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()
commit
b71f4ade1b8900d30c661d6c27f87c35214c398c upstream.
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes:
22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fangzhi Zuo [Mon, 23 Oct 2023 17:57:32 +0000 (13:57 -0400)]
drm/amd/display: Fix DSC not Enabled on Direct MST Sink
commit
a58555359a9f870543aaddef277c3396159895ce upstream.
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Kazlauskas [Wed, 13 Sep 2023 20:18:44 +0000 (16:18 -0400)]
drm/amd/display: Guard against invalid RPTR/WPTR being set
commit
1ffa8602e39b89469dc703ebab7a7e44c33da0f7 upstream.
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Kuehling [Tue, 31 Oct 2023 17:30:00 +0000 (13:30 -0400)]
drm/amdgpu: Fix possible null pointer dereference
commit
256503071c2de2b5b5c20e06654aa9a44f13aa62 upstream.
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes:
180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Thu, 9 Nov 2023 09:14:14 +0000 (10:14 +0100)]
drm/amdgpu: lower CS errors to debug severity
commit
17daf01ab4e3e5a5929747aa05cc15eb2bad5438 upstream.
Otherwise userspace can spam the logs by using incorrect input values.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Thu, 9 Nov 2023 09:12:39 +0000 (10:12 +0100)]
drm/amdgpu: fix error handling in amdgpu_bo_list_get()
commit
12f76050d8d4d10dab96333656b821bd4620d103 upstream.
We should not leak the pointer where we couldn't grab the reference
on to the caller because it can be that the error handling still
tries to put the reference then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Tue, 31 Oct 2023 14:35:27 +0000 (15:35 +0100)]
drm/amdgpu: fix error handling in amdgpu_vm_init
commit
8473bfdcb5b1a32fd05629c4535ccacd73bc5567 upstream.
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 17 Oct 2023 19:40:01 +0000 (15:40 -0400)]
drm/amdgpu: don't use ATRM for external devices
commit
432e664e7c98c243fab4c3c95bd463bea3aeed28 upstream.
The ATRM ACPI method is for fetching the dGPU vbios rom
image on laptops and all-in-one systems. It should not be
used for external add in cards. If the dGPU is thunderbolt
connected, don't try ATRM.
v2: pci_is_thunderbolt_attached only works for Intel. Use
pdev->external_facing instead.
v3: dev_is_removable() seems to be what we want
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Thu, 19 Oct 2023 17:56:56 +0000 (13:56 -0400)]
drm/amdgpu: add a retry for IP discovery init
commit
3938eb956e383ef88b8fc7d556492336ebee52df upstream.
AMD dGPUs have integrated FW that runs as soon as the
device gets power and initializes the board (determines
the amount of memory, provides configuration details to
the driver, etc.). For direct PCIe attached cards this
happens as soon as power is applied and normally completes
well before the OS has even started loading. However, with
hotpluggable ports like USB4, the driver needs to wait for
this to complete before initializing the device.
This normally takes 60-100ms, but could take longer on
some older boards periodically due to memory training.
Retry for up to a second. In the non-hotplug case, there
should be no change in behavior and this should complete
on the first try.
v2: adjust test criteria
v3: adjust checks for the masks, only enable on removable devices
v4: skip bif_fb_en check
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Huang [Wed, 1 Nov 2023 06:22:04 +0000 (14:22 +0800)]
drm/amdgpu: fix GRBM read timeout when do mes_self_test
commit
36e7ff5c13cb15cb7b06c76d42bb76cbf6b7ea75 upstream.
Use a proper MEID to make sure the CP_HQD_* and CP_GFX_HQD_* registers
can be touched when initialize the compute and gfx mqd in mes_self_test.
Otherwise, we expect no response from CP and an GRBM eventual timeout.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 17 Oct 2023 20:30:00 +0000 (16:30 -0400)]
drm/amdgpu: don't use pci_is_thunderbolt_attached()
commit
7b1c6263eaf4fd64ffe1cafdc504a42ee4bfbb33 upstream.
It's only valid on Intel systems with the Intel VSEC.
Use dev_is_removable() instead. This should do the right
thing regardless of the platform.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Wed, 1 Nov 2023 19:48:14 +0000 (15:48 -0400)]
drm/amdgpu/smu13: drop compute workload workaround
commit
23170863ea0a0965d224342c0eb2ad8303b1f267 upstream.
This was fixed in PMFW before launch and is no longer
required.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ma Jun [Tue, 31 Oct 2023 03:11:04 +0000 (11:11 +0800)]
drm/amd/pm: Fix error of MACO flag setting code
commit
7f3e6b840fa8b0889d776639310a5dc672c1e9e1 upstream.
MACO only works if BACO is supported
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nirmoy Das [Wed, 18 Oct 2023 09:38:15 +0000 (11:38 +0200)]
drm/i915: Flush WC GGTT only on required platforms
commit
7d7a328d0e8d6edefb7b0d665185d468667588d0 upstream.
gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit
0f9b91c754b7 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.
This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.
v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)
Fixes:
d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
(cherry picked from commit
81de3e296b10a13e5c9f13172825b0d8d9495c68)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kunwu Chan [Fri, 3 Nov 2023 11:09:22 +0000 (11:09 +0000)]
drm/i915: Fix potential spectre vulnerability
commit
1a8e9bad6ef563c28ab0f8619628d5511be55431 upstream.
Fix smatch warning:
drivers/gpu/drm/i915/gem/i915_gem_context.c:847 set_proto_ctx_sseu()
warn: potential spectre issue 'pc->user_engines' [r] (local cap)
Fixes:
d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103110922.430122-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit
27b086382c22efb7e0a16442f7bdc2e120108ef3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Tue, 31 Oct 2023 16:08:00 +0000 (18:08 +0200)]
drm/i915: Bump GLK CDCLK frequency when driving multiple pipes
commit
0cb89cd42fd22bbdec0b046c48f35775f5b88bdb upstream.
On GLK CDCLK frequency needs to be at least 2*96 MHz when accessing
the audio hardware. Currently we bump the CDCLK frequency up
temporarily (if not high enough already) whenever audio hardware
is being accessed, and drop it back down afterwards.
With a single active pipe this works just fine as we can switch
between all the valid CDCLK frequencies by changing the cd2x
divider, which doesn't require a full modeset. However with
multiple active pipes the cd2x divider trick no longer works,
and thus we end up blinking all displays off and back on.
To avoid this let's just bump the CDCLK frequency to >=2*96MHz
whenever multiple pipes are active. The downside is slightly
higher power consumption, but that seems like an acceptable
tradeoff. With a single active pipe we can stick to the current
more optiomal (from power comsumption POV) behaviour.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9599
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031160800.18371-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
451eaa1a614c911f5a51078dcb68022874e4cb12)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaitanya Kumar Borah [Wed, 18 Oct 2023 11:36:22 +0000 (17:06 +0530)]
drm/i915/mtl: Support HBR3 rate with C10 phy and eDP in MTL
commit
ce4941c2d6459664761c9854701015d8e99414fb upstream.
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit
a3431650f30a94b179d419ef87c21213655c28cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabe Teeger [Fri, 15 Sep 2023 22:18:48 +0000 (18:18 -0400)]
drm/amd/display: Add Null check for DPP resource
commit
e186400685d8a9287388a8535e2399bc673bfe95 upstream.
[what and why]
Check whether dpp resource pointer is null in advance and return early
if so.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Tue, 5 Sep 2023 05:04:59 +0000 (22:04 -0700)]
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
commit
351236947a45a512c517153bbe109fe868d05e6d upstream.
Simplify the code flow a bit by moving the retbleed IBPB check into the
existing 'has_microcode' block.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/0a22b86b1f6b07f9046a9ab763fc0e0d1b7a91d4.1693889988.git.jpoimboe@kernel.org
Cc: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Thu, 14 Sep 2023 13:11:59 +0000 (16:11 +0300)]
drm: bridge: it66121: ->get_edid callback must not return err pointers
commit
81995ee1620318b4c7bbeb02bcc372da2c078c76 upstream.
The drm stack does not expect error valued pointers for EDID anywhere.
Fixes:
e66856508746 ("drm: bridge: it66121: Set DDC preamble only once before reading EDID")
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Phong LE <ple@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131159.2472513-1-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bas Nieuwenhuizen [Tue, 17 Oct 2023 14:01:35 +0000 (16:01 +0200)]
drm/amd/pm: Handle non-terminated overdrive commands.
commit
08e9ebc75b5bcfec9d226f9e16bab2ab7b25a39a upstream.
The incoming strings might not be terminated by a newline
or a 0.
(found while testing a program that just wrote the string
itself, causing a crash)
Cc: stable@vger.kernel.org
Fixes:
e3933f26b657 ("drm/amd/pp: Add edit/commit/show OD clock/voltage support in sysfs")
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Foster [Mon, 2 Oct 2023 18:50:20 +0000 (14:50 -0400)]
ext4: fix racy may inline data check in dio write
commit
ce56d21355cd6f6937aca32f1f44ca749d1e4808 upstream.
syzbot reports that the following warning from ext4_iomap_begin()
triggers as of the commit referenced below:
if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
return -ERANGE;
This occurs during a dio write, which is never expected to encounter
an inode with inline data. To enforce this behavior,
ext4_dio_write_iter() checks the current inline state of the inode
and clears the MAY_INLINE_DATA state flag to either fall back to
buffered writes, or enforce that any other writers in progress on
the inode are not allowed to create inline data.
The problem is that the check for existing inline data and the state
flag can span a lock cycle. For example, if the ilock is originally
locked shared and subsequently upgraded to exclusive, another writer
may have reacquired the lock and created inline data before the dio
write task acquires the lock and proceeds.
The commit referenced below loosens the lock requirements to allow
some forms of unaligned dio writes to occur under shared lock, but
AFAICT the inline data check was technically already racy for any
dio write that would have involved a lock cycle. Regardless, lift
clearing of the state bit to the same lock critical section that
checks for preexisting inline data on the inode to close the race.
Cc: stable@kernel.org
Reported-by: syzbot+307da6ca5cb0d01d581a@syzkaller.appspotmail.com
Fixes:
310ee0902b8d ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20231002185020.531537-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 13 Oct 2023 12:13:50 +0000 (14:13 +0200)]
ext4: properly sync file size update after O_SYNC direct IO
commit
91562895f8030cb9a0470b1db49de79346a69f91 upstream.
Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.
References: https://lore.kernel.org/all/
02d18236-26ef-09b0-90ad-
030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes:
378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kemeng Shi [Sat, 26 Aug 2023 17:47:01 +0000 (01:47 +0800)]
ext4: add missed brelse in update_backups
commit
9adac8b01f4be28acd5838aade42b8daa4f0b642 upstream.
add missed brelse in update_backups
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kemeng Shi [Sat, 26 Aug 2023 17:47:03 +0000 (01:47 +0800)]
ext4: remove gdb backup copy for meta bg in setup_new_flex_group_blocks
commit
40dd7953f4d606c280074f10d23046b6812708ce upstream.
Wrong check of gdb backup in meta bg as following:
first_group is the first group of meta_bg which contains target group, so
target group is always >= first_group. We check if target group has gdb
backup by comparing first_group with [group + 1] and [group +
EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is
> first_group. So no copy of gdb backup in meta bg is done in
setup_new_flex_group_blocks.
No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks
as we always copy updated gdb block to backups at end of
ext4_flex_group_add as following:
ext4_flex_group_add
/* no gdb backup copy for meta bg any more */
setup_new_flex_group_blocks
/* update current group number */
ext4_update_super
sbi->s_groups_count += flex_gd->count;
/*
* if group in meta bg contains backup is added, the primary gdb block
* of the meta bg will be copy to backup in new added group here.
*/
for (; gdb_num <= gdb_num_end; gdb_num++)
update_backups(...)
In summary, we can remove wrong gdb backup copy code in
setup_new_flex_group_blocks.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yi [Thu, 24 Aug 2023 09:26:04 +0000 (17:26 +0800)]
ext4: correct the start block of counting reserved clusters
commit
40ea98396a3659062267d1fe5f99af4f7e4f05e3 upstream.
When big allocate feature is enabled, we need to count and update
reserved clusters before removing a delayed only extent_status entry.
{init|count|get}_rsvd() have already done this, but the start block
number of this counting isn't correct in the following case.
lblk end
| |
v v
-------------------------
| | orig_es
-------------------------
^ ^
len1 is 0 | len2 |
If the start block of the orig_es entry founded is bigger than lblk, we
passed lblk as start block to count_rsvd(), but the length is correct,
finally, the range to be counted is offset. This patch fix this by
passing the start blocks to 'orig_es->lblk + len1'.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kemeng Shi [Sat, 26 Aug 2023 17:47:02 +0000 (01:47 +0800)]
ext4: correct return value of ext4_convert_meta_bg
commit
48f1551592c54f7d8e2befc72a99ff4e47f7dca0 upstream.
Avoid to ignore error in "err".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ojaswin Mujoo [Mon, 18 Sep 2023 10:45:50 +0000 (16:15 +0530)]
ext4: mark buffer new if it is unwritten to avoid stale data exposure
commit
2cd8bdb5efc1e0d5b11a4b7ba6b922fd2736a87f upstream.
** Short Version **
In ext4 with dioread_nolock, we could have a scenario where the bh returned by
get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has
UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we
never zero out the range of bh that is not under write, causing whatever stale
data is present in the folio at that time to be written out to disk. To fix this
mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten().
** Long Version **
The issue mentioned above was resulting in two different bugs:
1. On block size < page size case in ext4, generic/269 was reliably
failing with dioread_nolock. The state of the write was as follows:
* The write was extending i_size.
* The last block of the file was fallocated and had an unwritten extent
* We were near ENOSPC and hence we were switching to non-delayed alloc
allocation.
In this case, the back trace that triggers the bug is as follows:
ext4_da_write_begin()
/* switch to nodelalloc due to low space */
ext4_write_begin()
ext4_should_dioread_nolock() // true since mount flags still have delalloc
__block_write_begin(..., ext4_get_block_unwritten)
__block_write_begin_int()
for(each buffer head in page) {
/* first iteration, this is bh1 which contains i_size */
if (!buffer_mapped)
get_block() /* returns bh with only UNWRITTEN and MAPPED */
/* second iteration, bh2 */
if (!buffer_mapped)
get_block() /* we fail here, could be ENOSPC */
}
if (err)
/*
* this would zero out all new buffers and mark them uptodate.
* Since bh1 was never marked new, we skip it here which causes
* the bug later.
*/
folio_zero_new_buffers();
/* ext4_wrte_begin() error handling */
ext4_truncate_failed_write()
ext4_truncate()
ext4_block_truncate_page()
__ext4_block_zero_page_range()
if(!buffer_uptodate())
ext4_read_bh_lock()
ext4_read_bh() -> ... ext4_submit_bh_wbc()
BUG_ON(buffer_unwritten(bh)); /* !!! */
2. The second issue is stale data exposure with page size >= blocksize
with dioread_nolock. The conditions needed for it to happen are same as
the previous issue ie dioread_nolock around ENOSPC condition. The issue
is also similar where in __block_write_begin_int() when we call
ext4_get_block_unwritten() on the buffer_head and the underlying extent
is unwritten, we get an unwritten and mapped buffer head. Since it is
not new, we never zero out the partial range which is not under write,
thus writing stale data to disk. This can be easily observed with the
following reproducer:
fallocate -l 4k testfile
xfs_io -c "pwrite 2k 2k" testfile
# hexdump output will have stale data in from byte 0 to 2k in testfile
hexdump -C testfile
NOTE: To trigger this, we need dioread_nolock enabled and write happening via
ext4_write_begin(), which is usually used when we have -o nodealloc. Since
dioread_nolock is disabled with nodelalloc, the only alternate way to call
ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie
ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when
ext4 is almost full like the way generic/269 was triggering it in Issue 1 above.
This might make the issue harder to hit. Hence, for reliable replication, I used
the below patch to temporarily allow dioread_nolock with nodelalloc and then
mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale
data issue 100% of times:
@@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
if (ext4_should_journal_data(inode))
return 0;
/* temporary fix to prevent generic/422 test failures */
- if (!test_opt(inode->i_sb, DELALLOC))
- return 0;
+ // if (!test_opt(inode->i_sb, DELALLOC))
+ // return 0;
return 1;
}
After applying this patch to mark buffer as NEW, both the above issues are
fixed.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kemeng Shi [Sat, 26 Aug 2023 17:47:00 +0000 (01:47 +0800)]
ext4: correct offset of gdb backup in non meta_bg group to update_backups
commit
31f13421c004a420c0e9d288859c9ea9259ea0cc upstream.
Commit
0aeaa2559d6d5 ("ext4: fix corruption when online resizing a 1K
bigalloc fs") found that primary superblock's offset in its group is
not equal to offset of backup superblock in its group when block size
is 1K and bigalloc is enabled. As group descriptor blocks are right
after superblock, we can't pass block number of gdb to update_backups
for the same reason.
The root casue of the issue above is that leading 1K padding block is
count as data block offset for primary block while backup block has no
padding block offset in its group.
Remove padding data block count to fix the issue for gdb backups.
For meta_bg case, update_backups treat blk_off as block number, do no
conversion in this case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Kellermann [Tue, 19 Sep 2023 08:18:23 +0000 (10:18 +0200)]
ext4: apply umask if ACL support is disabled
commit
484fd6c1de13b336806a967908a927cc0356e312 upstream.
The function ext4_init_acl() calls posix_acl_create() which is
responsible for applying the umask. But without
CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function,
and nobody applies the umask.
This fixes a bug which causes the umask to be ignored with O_TMPFILE
on ext4:
https://github.com/MusicPlayerDaemon/MPD/issues/558
https://bugs.gentoo.org/show_bug.cgi?id=686142#c3
https://bugzilla.kernel.org/show_bug.cgi?id=203625
Reviewed-by: "J. Bruce Fields" <bfields@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yi [Thu, 24 Aug 2023 09:26:05 +0000 (17:26 +0800)]
ext4: make sure allocate pending entry not fail
commit
8e387c89e96b9543a339f84043cf9df15fed2632 upstream.
__insert_pending() allocate memory in atomic context, so the allocation
could fail, but we are not handling that failure now. It could lead
ext4_es_remove_extent() to get wrong reserved clusters, and the global
data blocks reservation count will be incorrect. The same to
extents_status entry preallocation, preallocate pending entry out of the
i_es_lock with __GFP_NOFAIL, make sure __insert_pending() and
__revise_pending() always succeeds.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Jianjian [Thu, 24 Aug 2023 15:56:31 +0000 (23:56 +0800)]
ext4: no need to generate from free list in mballoc
commit
ebf6cb7c6e1241984f75f29f1bdbfa2fe7168f88 upstream.
Commit
7a2fcbf7f85 ("ext4: don't use blocks freed but not yet committed in
buddy cache init") added a code to mark as used blocks in the list of not yet
committed freed blocks during initialization of a buddy page. However
ext4_mb_free_metadata() makes sure buddy page is already loaded and takes a
reference to it so it cannot happen that ext4_mb_init_cache() is called
when efd list is non-empty. Just remove the
ext4_mb_generate_from_freelist() call.
Fixes:
7a2fcbf7f85('ext4: don't use blocks freed but not yet committed in buddy cache init')
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_53CBCB1668358AE862684E453DF37B722008@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Wed, 24 May 2023 07:25:38 +0000 (15:25 +0800)]
ext4: fix race between writepages and remount
commit
745f17a4166e79315e4b7f33ce89d03e75a76983 upstream.
We got a WARNING in ext4_add_complete_io:
==================================================================
WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250
CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85
RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4]
[...]
Call Trace:
<TASK>
ext4_end_bio+0xa8/0x240 [ext4]
bio_endio+0x195/0x310
blk_update_request+0x184/0x770
scsi_end_request+0x2f/0x240
scsi_io_completion+0x75/0x450
scsi_finish_command+0xef/0x160
scsi_complete+0xa3/0x180
blk_complete_reqs+0x60/0x80
blk_done_softirq+0x25/0x40
__do_softirq+0x119/0x4c8
run_ksoftirqd+0x42/0x70
smpboot_thread_fn+0x136/0x3c0
kthread+0x140/0x1a0
ret_from_fork+0x2c/0x50
==================================================================
Above issue may happen as follows:
cpu1 cpu2
----------------------------|----------------------------
mount -o dioread_lock
ext4_writepages
ext4_do_writepages
*if (ext4_should_dioread_nolock(inode))*
// rsv_blocks is not assigned here
mount -o remount,dioread_nolock
ext4_journal_start_with_reserve
__ext4_journal_start
__ext4_journal_start_sb
jbd2__journal_start
*if (rsv_blocks)*
// h_rsv_handle is not initialized here
mpage_map_and_submit_extent
mpage_map_one_extent
dioread_nolock = ext4_should_dioread_nolock(inode)
if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN))
mpd->io_submit.io_end->handle = handle->h_rsv_handle
ext4_set_io_unwritten_flag
io_end->flag |= EXT4_IO_END_UNWRITTEN
// now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag
scsi_finish_command
scsi_io_completion
scsi_io_completion_action
scsi_end_request
blk_update_request
req_bio_endio
bio_endio
bio->bi_end_io > ext4_end_bio
ext4_put_io_end_defer
ext4_add_complete_io
// trigger WARN_ON(!io_end->handle && sbi->s_journal);
The immediate cause of this problem is that ext4_should_dioread_nolock()
function returns inconsistent values in the ext4_do_writepages() and
mpage_map_one_extent(). There are four conditions in this function that
can be changed at mount time to cause this problem. These four conditions
can be divided into two categories:
(1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl
(2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount
The two in the first category have been fixed by commit
c8585c6fcaf2
("ext4: fix races between changing inode journal mode and ext4_writepages")
and commit
cb85f4d23f79 ("ext4: fix race between writepages and enabling
EXT4_EXTENTS_FL") respectively.
Two cases in the other category have not yet been fixed, and the above
issue is caused by this situation. We refer to the fix for the first
category, when applying options during remount, we grab s_writepages_rwsem
to avoid racing with writepages ops to trigger this problem.
Fixes:
6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Tue, 21 Nov 2023 08:09:33 +0000 (09:09 +0100)]
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
commit
6a26310273c323380da21eb23fcfd50e31140913 upstream.
This reverts commit
efa5f1311c4998e9e6317c52bc5ee93b3a0f36df.
I couldn't reproduce the reported issue. What I did, based on a pcap
packet log provided by the reporter:
- Used same chip version (RTL8168h)
- Set MAC address to the one used on the reporters system
- Replayed the EAPOL unicast packet that, according to the reporter,
was filtered out by the mc filter.
The packet was properly received.
Therefore the root cause of the reported issue seems to be somewhere
else. Disabling mc filtering completely for the most common chip
version is a quite big hammer. Therefore revert the change and wait
for further analysis results from the reporter.
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Kosina [Tue, 21 Nov 2023 13:38:11 +0000 (14:38 +0100)]
Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"
commit
5b4ffb176d7979ac66b349addf3f7de433335e00 upstream.
This reverts commit
9d1bd9346241cd6963b58da7ffb7ed303285f684.
Multiple people reported misbehaving devices and reverting this commit fixes
the problem for them. As soon as the original commit author starts reacting
again, we can try to figure out why he hasn't seen the issues (mismatching
report descriptors?), but for the time being, fix for 6.7 by reverting.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov [Wed, 30 Aug 2023 15:16:15 +0000 (16:16 +0100)]
media: qcom: camss: Fix csid-gen2 for test pattern generator
commit
87889f1b7ea40d2544b49c62092e6ef2792dced7 upstream.
In the current driver csid Test Pattern Generator (TPG) doesn't work.
This change:
- fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0
- fixes the shift by one between test_pattern control value and the
actual pattern.
- drops fixed VC of 0x0a which testing showed prohibited some test
patterns in the CSID to produce output.
So that TPG starts working, but with the below limitations:
- only test_pattern=9 works as it should
- test_pattern=8 and test_pattern=7 produce black frame (all zeroes)
- the rest of test_pattern's don't work (yavta doesn't get the data)
- regardless of the CFA pattern set by 'media-ctl -V' the actual pixel
order is always the same (RGGB for any RAW8 or RAW10P format in
4608x2592 resolution).
Tested with:
RAW10P format, VC0:
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0
RAW10P format, VC1:
media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]'
v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1
RAW8 format, VC0:
media-ctl --reset
media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0
Fixes:
eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:13 +0000 (16:16 +0100)]
media: qcom: camss: Fix invalid clock enable bit disjunction
commit
d8f7e1a60d01739a1d78db2b08603089c6cf7c8e upstream.
define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)
disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
either way.
Fixes:
4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:14 +0000 (16:16 +0100)]
media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3
commit
e655d1ae9703286cef7fda8675cad62f649dc183 upstream.
VC_MODE = 0 implies a two bit VC address.
VC_MODE = 1 is required for VCs with a larger address than two bits.
Fixes:
eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:12 +0000 (16:16 +0100)]
media: qcom: camss: Fix missing vfe_lite clocks check
commit
b6e1bdca463a932c1ac02caa7d3e14bf39288e0c upstream.
check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.
Fixes:
7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:11 +0000 (16:16 +0100)]
media: qcom: camss: Fix VFE-480 vfe_disable_output()
commit
7f24d291350426d40b36dfbe6b3090617cdfd37a upstream.
vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.
Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.
Fixes:
4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:10 +0000 (16:16 +0100)]
media: qcom: camss: Fix VFE-17x vfe_disable_output()
commit
3143ad282fc08bf995ee73e32a9e40c527bf265d upstream.
There are two problems with the current vfe_disable_output() routine.
Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.
Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.
Rewrite the vfe_disable_output() routine to
- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0
remembering to hold the spinlock when we do so followed by
- Reset the VFE
Testing on sc8280xp and sdm845 shows this to be a valid fix.
Fixes:
7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:09 +0000 (16:16 +0100)]
media: qcom: camss: Fix vfe_get() error jump
commit
26bda3da00c3edef727a6acb00ed2eb4b22f8723 upstream.
Right now it is possible to do a vfe_get() with the internal reference
count at 1. If vfe_check_clock_rates() returns non-zero then we will
leave the reference count as-is and
run:
- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()
skip:
- camss_disable_clocks()
Subsequent vfe_put() calls will when the ref-count is non-zero
unconditionally run:
- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()
- camss_disable_clocks()
vfe_get() should not attempt to roll-back on error when the ref-count is
non-zero as the upper layers will still do their own vfe_put() operations.
vfe_put() will drop the reference count and do the necessary power
domain release, the cleanup jumps in vfe_get() should only be run when
the ref-count is zero.
[ 50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80
[ 50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023
[ 50.095799] pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 50.095802] pc : refcount_warn_saturate+0xf4/0x148
[ 50.095804] lr : refcount_warn_saturate+0xf4/0x148
[ 50.095805] sp :
ffff80000c7cb8b0
[ 50.095806] x29:
ffff80000c7cb8b0 x28:
ffff16ecc0e3fc10 x27:
0000000000000000
[ 50.095810] x26:
0000000000000000 x25:
0000000000020802 x24:
0000000000000000
[ 50.095813] x23:
ffff16ecc7360640 x22:
00000000ffffffff x21:
0000000000000005
[ 50.095815] x20:
ffff16ed175f4400 x19:
ffffb4d9852942a8 x18:
ffffffffffffffff
[ 50.095818] x17:
ffffb4d9852d4a48 x16:
ffffb4d983da5db8 x15:
ffff80000c7cb320
[ 50.095821] x14:
0000000000000001 x13:
2e656572662d7265 x12:
7466612d65737520
[ 50.095823] x11:
00000000ffffefff x10:
ffffb4d9850cebf0 x9 :
ffffb4d9835cf954
[ 50.095826] x8 :
0000000000017fe8 x7 :
c0000000ffffefff x6 :
0000000000057fa8
[ 50.095829] x5 :
ffff16f813fe3d08 x4 :
0000000000000000 x3 :
ffff621e8f4d2000
[ 50.095832] x2 :
0000000000000000 x1 :
0000000000000000 x0 :
ffff16ed32119040
[ 50.095835] Call trace:
[ 50.095836] refcount_warn_saturate+0xf4/0x148
[ 50.095838] device_link_put_kref+0x84/0xc8
[ 50.095843] device_link_del+0x38/0x58
[ 50.095846] vfe_pm_domain_off+0x3c/0x50 [qcom_camss]
[ 50.095860] vfe_put+0x114/0x140 [qcom_camss]
[ 50.095869] csid_set_power+0x2c8/0x408 [qcom_camss]
[ 50.095878] pipeline_pm_power_one+0x164/0x170 [videodev]
[ 50.095896] pipeline_pm_power+0xc4/0x110 [videodev]
[ 50.095909] v4l2_pipeline_pm_use+0x5c/0xa0 [videodev]
[ 50.095923] v4l2_pipeline_pm_get+0x1c/0x30 [videodev]
[ 50.095937] video_open+0x7c/0x100 [qcom_camss]
[ 50.095945] v4l2_open+0x84/0x130 [videodev]
[ 50.095960] chrdev_open+0xc8/0x250
[ 50.095964] do_dentry_open+0x1bc/0x498
[ 50.095966] vfs_open+0x34/0x40
[ 50.095968] path_openat+0xb44/0xf20
[ 50.095971] do_filp_open+0xa4/0x160
[ 50.095974] do_sys_openat2+0xc8/0x188
[ 50.095975] __arm64_sys_openat+0x6c/0xb8
[ 50.095977] invoke_syscall+0x50/0x128
[ 50.095982] el0_svc_common.constprop.0+0x4c/0x100
[ 50.095985] do_el0_svc+0x40/0xa8
[ 50.095988] el0_svc+0x2c/0x88
[ 50.095991] el0t_64_sync_handler+0xf4/0x120
[ 50.095994] el0t_64_sync+0x190/0x198
[ 50.095996] ---[ end trace
0000000000000000 ]---
Fixes:
779096916dae ("media: camss: vfe: Fix runtime PM imbalance on error")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Wed, 30 Aug 2023 15:16:06 +0000 (16:16 +0100)]
media: qcom: camss: Fix pm_domain_on sequence in probe
commit
7405116519ad70b8c7340359bfac8db8279e7ce4 upstream.
We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().
Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.
In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.
Fixes:
2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Victor Shih [Tue, 7 Nov 2023 09:57:40 +0000 (17:57 +0800)]
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
commit
015c9cbcf0ad709079117d27c2094a46e0eadcdb upstream.
Due to a flaw in the hardware design, the GL9750 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9750
PCI config. Therefore, the replay timer timeout must be masked.
Fixes:
d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ChunHao Lin [Thu, 9 Nov 2023 17:33:59 +0000 (01:33 +0800)]
r8169: add handling DASH when DASH is disabled
commit
0ab0c45d8aaea5192328bfa6989673aceafc767c upstream.
For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.
This patch also prepares for "fix network lost after resume on DASH
systems".
Fixes:
ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ChunHao Lin [Thu, 9 Nov 2023 17:34:00 +0000 (01:34 +0800)]
r8169: fix network lost after resume on DASH systems
commit
868c3b95afef4883bfb66c9397482da6840b5baf upstream.
Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.
Fixes:
b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Mon, 13 Nov 2023 23:16:17 +0000 (00:16 +0100)]
selftests: mptcp: fix fastclose with csum failure
commit
7cefbe5e1dacc7236caa77e9d072423f21422fe2 upstream.
Running the mp_join selftest manually with the following command line:
./mptcp_join.sh -z -C
leads to some failures:
002 fastclose server test
# ...
rtx [fail] got 1 MP_RST[s] TX expected 0
# ...
rstrx [fail] got 1 MP_RST[s] RX expected 0
The problem is really in the wrong expectations for the RST checks
implied by the csum validation. Note that the same check is repeated
explicitly in the same test-case, with the correct expectation and
pass successfully.
Address the issue explicitly setting the correct expectation for
the failing checks.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes:
6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Mon, 13 Nov 2023 23:16:16 +0000 (00:16 +0100)]
mptcp: fix setsockopt(IP_TOS) subflow locking
commit
7679d34f97b7a09fd565f5729f79fd61b7c55329 upstream.
The MPTCP implementation of the IP_TOS socket option uses the lockless
variant of the TOS manipulation helper and does not hold such lock at
the helper invocation time.
Add the required locking.
Fixes:
ffcacff87cd6 ("mptcp: Support for IP_TOS for MPTCP setsockopt()")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 13 Nov 2023 23:16:15 +0000 (00:16 +0100)]
mptcp: add validity check for sending RM_ADDR
commit
8df220b29282e8b450ea57be62e1eccd4996837c upstream.
This patch adds the validity check for sending RM_ADDRs for userspace PM
in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the
anno_list or conn_list.
Fixes:
8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Mon, 13 Nov 2023 23:16:13 +0000 (00:16 +0100)]
mptcp: deal with large GSO size
commit
9fce92f050f448a0d1ddd9083ef967d9930f1e52 upstream.
After the blamed commit below, the TCP sockets (and the MPTCP subflows)
can build egress packets larger than 64K. That exceeds the maximum DSS
data size, the length being misrepresent on the wire and the stream being
corrupted, as later observed on the receiver:
WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0
CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705
RSP: 0018:
ffffc90000006e80 EFLAGS:
00010246
RAX:
ffffffff83e9f674 RBX:
ffff88802f45d870 RCX:
ffff888102ad0000
netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
RDX:
0000000080000303 RSI:
0000000000013908 RDI:
0000000000003908
RBP:
ffffc90000007110 R08:
ffffffff83e9e078 R09:
1ffff1100e548c8a
R10:
dffffc0000000000 R11:
ffffed100e548c8b R12:
0000000000013908
R13:
dffffc0000000000 R14:
0000000000003908 R15:
000000000031cf29
FS:
00007f239c47e700(0000) GS:
ffff88811b200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f239c45cd78 CR3:
000000006a66c006 CR4:
0000000000770ef0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000600
PKRU:
55555554
Call Trace:
<IRQ>
mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819
subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409
tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151
tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098
tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483
tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749
ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438
ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483
ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304
__netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532
process_backlog+0x353/0x660 net/core/dev.c:5974
__napi_poll+0xc6/0x5a0 net/core/dev.c:6536
net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603
__do_softirq+0x184/0x524 kernel/softirq.c:553
do_softirq+0xdd/0x130 kernel/softirq.c:454
Address the issue explicitly bounding the maximum GSO size to what MPTCP
actually allows.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/450
Fixes:
7c4e983c4f3c ("net: allow gso_max_size to exceed 65536")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Gushchin [Tue, 7 Nov 2023 17:18:02 +0000 (09:18 -0800)]
mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
commit
24948e3b7b12e0031a6edb4f49bbb9fb2ad1e4e9 upstream.
Objcg vectors attached to slab pages to store slab object ownership
information are allocated using gfp flags for the original slab
allocation. Depending on slab page order and the size of slab objects,
objcg vector can take several pages.
If the original allocation was done with the __GFP_NOFAIL flag, it
triggered a warning in the page allocation code. Indeed, order > 1 pages
should not been allocated with the __GFP_NOFAIL flag.
Fix this by simply dropping the __GFP_NOFAIL flag when allocating the
objcg vector. It effectively allows to skip the accounting of a single
slab object under a heavy memory pressure.
An alternative would be to implement the mechanism to fallback to order-0
allocations for accounting metadata, which is also not perfect because it
will increase performance penalty and memory footprint of the kernel
memory accounting under memory pressure.
Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Christoph Lameter <cl@linux.com>
Closes: https://lkml.kernel.org/r/
6b42243e-f197-600a-5d22-
56bd728a5ad8@gentwo.org
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Roesch [Mon, 6 Nov 2023 18:19:18 +0000 (10:19 -0800)]
mm: fix for negative counter: nr_file_hugepages
commit
a48d5bdc877b85201e42cef9c2fdf5378164c23a upstream.
While qualifiying the 6.4 release, the following warning was detected in
messages:
vmstat_refresh: nr_file_hugepages -15664
The warning is caused by the incorrect updating of the NR_FILE_THPS
counter in the function split_huge_page_to_list. The if case is checking
for folio_test_swapbacked, but the else case is missing the check for
folio_test_pmd_mappable. The other functions that manipulate the counter
like __filemap_add_folio and filemap_unaccount_folio have the
corresponding check.
I have a test case, which reproduces the problem. It can be found here:
https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c
The test case reproduces on an XFS filesystem. Running the same test
case on a BTRFS filesystem does not reproduce the problem.
AFAIK version 6.1 until 6.6 are affected by this problem.
[akpm@linux-foundation.org: whitespace fix]
[shr@devkernel.io: test for folio_test_pmd_mappable()]
Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Co-debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Victor Shih [Tue, 12 Sep 2023 09:17:10 +0000 (17:17 +0800)]
mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2
commit
d7133797e9e1b72fd89237f68cb36d745599ed86 upstream.
When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not
enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter
ASPM L1.2.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20230912091710.7797-1-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nam Cao [Tue, 29 Aug 2023 18:25:00 +0000 (20:25 +0200)]
riscv: kprobes: allow writing to x0
commit
8cb22bec142624d21bc85ff96b7bad10b6220e6a upstream.
Instructions can write to x0, so we should simulate these instructions
normally.
Currently, the kernel hangs if an instruction who writes to x0 is
simulated.
Fixes:
c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Song Shuai [Wed, 30 Aug 2023 04:39:20 +0000 (21:39 -0700)]
riscv: correct pt_level name via pgtable_l5/4_enabled
commit
e59e5e2754bf983fc58ad18f99b5eec01f1a0745 upstream.
The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names.
But if page mode is downgraded from kernel cmdline or restricted by
the hardware in 64BIT, it will give a wrong name.
Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD"
that should be "PGD":
0xffffffd840000000-0xffffffd900000000 0x00000000c0000000 3G PUD D A G . . W R V
So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it.
Fixes:
e8a62cc26ddf ("riscv: Implement sv48 support")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230712115740.943324-1-suagrfillet@gmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230830044129.11481-3-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Song Shuai [Wed, 9 Aug 2023 03:10:23 +0000 (11:10 +0800)]
riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
commit
559fe94a449cba5b50a7cffea60474b385598c00 upstream.
Since the commit
011f09d12052 set sv57 as default for CONFIG_64BIT,
the comment of CONFIG_PAGE_OFFSET should be updated too.
Fixes:
011f09d12052 ("riscv: mm: Set sv57 on defaultly")
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nam Cao [Mon, 21 Aug 2023 14:57:09 +0000 (16:57 +0200)]
riscv: put interrupt entries into .irqentry.text
commit
87615e95f6f9ccd36d4a3905a2d87f91967ea9d2 upstream.
The interrupt entries are expected to be in the .irqentry.text section.
For example, for kprobes to work properly, exception code cannot be
probed; this is ensured by blacklisting addresses in the .irqentry.text
section.
Fixes:
7db91e57a0ac ("RISC-V: Task implementation")
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230821145708.21270-1-namcaov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minda Chen [Wed, 2 Aug 2023 06:42:15 +0000 (14:42 +0800)]
riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
commit
dd16ac404a685cce07e67261a94c6225d90ea7ba upstream.
Actually it is a part of Conor's
commit
aae538cd03bc ("riscv: fix detection of toolchain
Zihintpause support").
It is looks like a merge issue. Samuel's
commit
0b1d60d6dd9e ("riscv: Fix build with
CONFIG_CC_OPTIMIZE_FOR_SIZE=y") do not base on Conor's commit and
revert to __riscv_zihintpause. So this patch can fix it.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Fixes:
3c349eacc559 ("Merge patch "riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y"")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802064215.31111-1-minda.chen@starfivetech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Tesarik [Wed, 8 Nov 2023 11:12:49 +0000 (12:12 +0100)]
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
commit
53c87e846e335e3c18044c397cc35178163d7827 upstream.
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer.
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/
104a8c8fedffd1ff8a2890983e2ec1c26bff6810.camel@linux.ibm.com/
Fixes:
79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Tesarik [Thu, 2 Nov 2023 09:36:49 +0000 (10:36 +0100)]
swiotlb: do not free decrypted pages if dynamic
commit
a5e3b127455d073f146a2a4ea3e7117635d34c5c upstream.
Fix these two error paths:
1. When set_memory_decrypted() fails, pages may be left fully or partially
decrypted.
2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
physical address is too high.
To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.
To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.
Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).
Cc: stable@vger.kernel.org
Fixes:
79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu (Google) [Wed, 8 Nov 2023 12:12:39 +0000 (21:12 +0900)]
tracing: fprobe-event: Fix to check tracepoint event and return
commit
ce51e6153f7781bcde0f8bb4c81d6fd85ee422e6 upstream.
Fix to check the tracepoint event is not valid with $retval.
The commit
08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is
a return event by $retval") introduced automatic return probe
conversion with $retval. But since tracepoint event does not
support return probe, $retval is not acceptable.
Without this fix, ftracetest, tprobe_syntax_errors.tc fails;
[22] Tracepoint probe event parser error log check [FAIL]
----
# tail 22-tprobe_syntax_errors.tc-log.mRKroL
+ ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events
+ printf %s t kfree
+ wc -c
+ pos=8
+ printf %s t kfree ^$retval
+ tr -d ^
+ command=t kfree $retval
+ echo Test command: t kfree $retval
Test command: t kfree $retval
+ echo
----
So 't kfree $retval' should fail (tracepoint doesn't support
return probe) but passed it.
Link: https://lore.kernel.org/all/169944555933.45057.12831706585287704173.stgit@devnote2/
Fixes:
08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 8 Nov 2023 06:12:15 +0000 (14:12 +0800)]
LoongArch: Mark __percpu functions as always inline
commit
71945968d8b128c955204baa33ec03bdd91bdc26 upstream.
A recent change to the optimization pipeline in LLVM reveals some
fragility around the inlining of LoongArch's __percpu functions, which
manifests as a BUILD_BUG() failure:
In file included from kernel/sched/build_policy.c:17:
In file included from include/linux/sched/cputime.h:5:
In file included from include/linux/sched/signal.h:5:
In file included from include/linux/rculist.h:11:
In file included from include/linux/rcupdate.h:26:
In file included from include/linux/irqflags.h:18:
arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed
97 | BUILD_BUG();
| ^
include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG'
59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
| ^
include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^
include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert'
425 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert'
413 | __compiletime_assert(condition, msg, prefix, suffix)
| ^
include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert'
406 | prefix ## suffix(); \
| ^
<scratch space>:86:1: note: expanded from here
86 | __compiletime_assert_51
| ^
1 error generated.
If these functions are not inlined (which the compiler is free to do
even with functions marked with the standard 'inline' keyword), the
BUILD_BUG() in the default case cannot be eliminated since the compiler
cannot prove it is never used, resulting in a build failure due to the
error attribute.
Mark these functions as __always_inline to guarantee inlining so that
the BUILD_BUG() only triggers when the default case genuinely cannot be
eliminated due to an unexpected size.
Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1955
Fixes:
46859ac8af52 ("LoongArch: Add multi-processor (SMP) support")
Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Fri, 10 Nov 2023 16:28:39 +0000 (11:28 -0500)]
NFSD: Update nfsd_cache_append() to use xdr_stream
commit
49cecd8628a9855cd993792a0377559ea32d5e7c upstream.
When inserting a DRC-cached response into the reply buffer, ensure
that the reply buffer's xdr_stream is updated properly. Otherwise
the server will send a garbage response.
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahmoud Adam [Fri, 10 Nov 2023 18:21:04 +0000 (19:21 +0100)]
nfsd: fix file memleak on client_opens_release
commit
bc1b5acb40201a0746d68a7d7cfc141899937f4f upstream.
seq_release should be called to free the allocated seq_file
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes:
78599c42ae3c ("nfsd4: add file to display list of client's opens")
Reviewed-by: NeilBrown <neilb@suse.de>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Fri, 17 Nov 2023 17:37:25 +0000 (18:37 +0100)]
dm-verity: don't use blocking calls from tasklets
commit
28f07f2ab4b3a2714f1fefcc58ada4bcc195f806 upstream.
The commit
5721d4e5a9cd enhanced dm-verity, so that it can verify blocks
from tasklets rather than from workqueues. This reportedly improves
performance significantly.
However, dm-verity was using the flag CRYPTO_TFM_REQ_MAY_SLEEP from
tasklets which resulted in warnings about sleeping function being called
from non-sleeping context.
BUG: sleeping function called from invalid context at crypto/internal.h:206
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
preempt_count: 100, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 14 Comm: ksoftirqd/0 Tainted: G W 6.7.0-rc1 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
__might_resched+0x110/0x160
crypto_hash_walk_done+0x54/0xb0
shash_ahash_update+0x51/0x60
verity_hash_update.isra.0+0x4a/0x130 [dm_verity]
verity_verify_io+0x165/0x550 [dm_verity]
? free_unref_page+0xdf/0x170
? psi_group_change+0x113/0x390
verity_tasklet+0xd/0x70 [dm_verity]
tasklet_action_common.isra.0+0xb3/0xc0
__do_softirq+0xaf/0x1ec
? smpboot_thread_fn+0x1d/0x200
? sort_range+0x20/0x20
run_ksoftirqd+0x15/0x30
smpboot_thread_fn+0xed/0x200
kthread+0xdc/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x28/0x40
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
This commit fixes dm-verity so that it doesn't use the flags
CRYPTO_TFM_REQ_MAY_SLEEP and CRYPTO_TFM_REQ_MAY_BACKLOG from tasklets. The
crypto API would do GFP_ATOMIC allocation instead, it could return -ENOMEM
and we catch -ENOMEM in verity_tasklet and requeue the request to the
workqueue.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.0+
Fixes:
5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Fri, 17 Nov 2023 17:36:34 +0000 (18:36 +0100)]
dm-bufio: fix no-sleep mode
commit
2a695062a5a42aead8c539a344168d4806b3fda2 upstream.
dm-bufio has a no-sleep mode. When activated (with the
DM_BUFIO_CLIENT_NO_SLEEP flag), the bufio client is read-only and we
could call dm_bufio_get from tasklets. This is used by dm-verity.
Unfortunately, commit
450e8dee51aa ("dm bufio: improve concurrent IO
performance") broke this and the kernel would warn that cache_get()
was calling down_read() from no-sleeping context. The bug can be
reproduced by using "veritysetup open" with the "--use-tasklets"
flag.
This commit fixes dm-bufio, so that the tasklet mode works again, by
expanding use of the 'no_sleep_enabled' static_key to conditionally
use either a rw_semaphore or rwlock_t (which are colocated in the
buffer_tree structure using a union).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.4
Fixes:
450e8dee51aa ("dm bufio: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Thu, 14 Sep 2023 13:10:58 +0000 (16:10 +0300)]
drm/mediatek/dp: fix memory leak on ->get_edid callback error path
commit
fcaf9761fd5884a64eaac48536f8c27ecfd2e6bc upstream.
Setting new_edid to NULL leaks the buffer.
Fixes:
f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Guillaume Ranquet <granquet@baylibre.com>
Cc: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914131058.2472260-1-jani.nikula@intel.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Thu, 14 Sep 2023 15:53:17 +0000 (18:53 +0300)]
drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection
commit
dab12fa8d2bd3868cf2de485ed15a3feef28a13d upstream.
The sads returned by drm_edid_to_sad() needs to be freed.
Fixes:
e71a8ebbe086 ("drm/mediatek: dp: Audio support for MT8195")
Cc: Guillaume Ranquet <granquet@baylibre.com>
Cc: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914155317.2511876-1-jani.nikula@intel.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus [Mon, 4 Sep 2023 12:57:37 +0000 (15:57 +0300)]
media: ccs: Correctly initialise try compose rectangle
commit
724ff68e968b19d786870d333f9952bdd6b119cb upstream.
Initialise the try sink compose rectangle size to the sink compose
rectangle for binner and scaler sub-devices. This was missed due to the
faulty condition that lead to the compose rectangles to be initialised for
the pixel array sub-device where it is not relevant.
Fixes:
ccfc97bdb5ae ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikash Garodia [Thu, 10 Aug 2023 02:25:03 +0000 (07:55 +0530)]
media: venus: hfi: add checks to handle capabilities from firmware
commit
8d0b89398b7ebc52103e055bf36b60b045f5258f upstream.
The hfi parser, parses the capabilities received from venus firmware and
copies them to core capabilities. Consider below api, for example,
fill_caps - In this api, caps in core structure gets updated with the
number of capabilities received in firmware data payload. If the same api
is called multiple times, there is a possibility of copying beyond the max
allocated size in core caps.
Similar possibilities in fill_raw_fmts and fill_profile_level functions.
Cc: stable@vger.kernel.org
Fixes:
1a73374a04e5 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikash Garodia [Thu, 10 Aug 2023 02:25:02 +0000 (07:55 +0530)]
media: venus: hfi: fix the check to handle session buffer requirement
commit
b18e36dfd6c935da60a971310374f3dfec3c82e1 upstream.
Buffer requirement, for different buffer type, comes from video firmware.
While copying these requirements, there is an OOB possibility when the
payload from firmware is more than expected size. Fix the check to avoid
the OOB possibility.
Cc: stable@vger.kernel.org
Fixes:
09c2845e8fe4 ("[media] media: venus: hfi: add Host Firmware Interface (HFI)")
Reviewed-by: Nathan Hebert <nhebert@chromium.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikash Garodia [Thu, 10 Aug 2023 02:25:04 +0000 (07:55 +0530)]
media: venus: hfi_parser: Add check to keep the number of codecs within range
commit
0768a9dd809ef52440b5df7dce5a1c1c7e97abbd upstream.
Supported codec bitmask is populated from the payload from venus firmware.
There is a possible case when all the bits in the codec bitmask is set. In
such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized.
Now while filling the caps for encoder, it can lead to access the caps
array beyong 32 index. Hence leading to OOB write.
The fix counts the supported encoder and decoder. If the count is more than
max, then it skips accessing the caps.
Cc: stable@vger.kernel.org
Fixes:
1a73374a04e5 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Fri, 6 Oct 2023 11:54:25 +0000 (12:54 +0100)]
media: sharp: fix sharp encoding
commit
4f7efc71891462ab7606da7039f480d7c1584a13 upstream.
The Sharp protocol[1] encoding has incorrect timings for bit space.
[1] https://www.sbprojects.net/knowledge/ir/sharp.php
Fixes:
d35afc5fe097 ("[media] rc: ir-sharp-decoder: Add encode capability")
Cc: stable@vger.kernel.org
Reported-by: Joe Ferner <joe.m.ferner@gmail.com>
Closes: https://sourceforge.net/p/lirc/mailman/message/
38604507/
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Fri, 6 Oct 2023 21:31:52 +0000 (22:31 +0100)]
media: lirc: drop trailing space from scancode transmit
commit
c8a489f820179fb12251e262b50303c29de991ac upstream.
When transmitting, infrared drivers expect an odd number of samples; iow
without a trailing space. No problems have been observed so far, so
this is just belt and braces.
Fixes:
9b6192589be7 ("media: lirc: implement scancode sending")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Thu, 7 Sep 2023 18:11:00 +0000 (11:11 -0700)]
f2fs: split initial and dynamic conditions for extent_cache
commit
f803982190f0265fd36cf84670aa6daefc2b0768 upstream.
Let's allocate the extent_cache tree without dynamic conditions to avoid a
missing condition causing a panic as below.
# create a file w/ a compressed flag
# disable the compression
# panic while updating extent_cache
F2FS-fs (dm-64): Swapfile: last extent is not aligned to section
F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N)
Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
Write of size 4 at addr
0000000000000030 by task syz-executor154/3327
CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1
Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023
Call Trace:
__dump_stack out/common/lib/dump_stack.c:77 [inline]
dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118
__kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415
kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428
kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186
__kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37
instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
__raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
_raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
__drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155
f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172
f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline]
f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764
vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310
ksys_fallocate out/common/fs/open.c:333 [inline]
__do_sys_fallocate out/common/fs/open.c:341 [inline]
__se_sys_fallocate out/common/fs/open.c:339 [inline]
__x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339
do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46
Cc: stable@vger.kernel.org
Fixes:
72840cccc0a1 ("f2fs: allocate the extent_cache by default")
Reported-and-tested-by: syzbot+d342e330a37b48c094b7@syzkaller.appspotmail.com
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Su Hui [Sun, 8 Oct 2023 06:39:30 +0000 (14:39 +0800)]
f2fs: avoid format-overflow warning
commit
e0d4e8acb3789c5a8651061fbab62ca24a45c063 upstream.
With gcc and W=1 option, there's a warning like this:
fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’:
fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between
1 and 7 bytes into a region of size between 5 and 8
[-Werror=format-overflow=]
1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev),
MINOR(dev));
| ^~
String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up
to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35".
slab_name's size should be 35 rather than 32.
Cc: stable@vger.kernel.org
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 8 Sep 2023 22:41:42 +0000 (15:41 -0700)]
f2fs: set the default compress_level on ioctl
commit
f5f3bd903a5d3e3b2ba89f11e0e29db25e60c048 upstream.
Otherwise, we'll get a broken inode.
# touch $FILE
# f2fs_io setflags compression $FILE
# f2fs_io set_coption 2 8 $FILE
[ 112.227612] F2FS-fs (dm-51): sanity_check_compress_inode: inode (ino=8d3fe) has unsupported compress level: 0, run fsck to fix
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Thu, 19 Oct 2023 22:51:08 +0000 (15:51 -0700)]
f2fs: do not return EFSCORRUPTED, but try to run online repair
commit
50a472bbc79ff9d5a88be8019a60e936cadf9f13 upstream.
If we return the error, there's no way to recover the status as of now, since
fsck does not fix the xattr boundary issue.
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Sat, 9 Sep 2023 20:25:06 +0000 (22:25 +0200)]
i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
commit
f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream.
Currently we set SMBHSTCNT_LAST_BYTE only after the host has started
receiving the last byte. If we get e.g. preempted before setting
SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte
before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing
SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code
is also consistent with what we do in i801_isr_byte_done().
Reported-by: Jean Delvare <jdelvare@suse.com>
Closes: https://lore.kernel.org/linux-i2c/
20230828152747.
09444625@endymion.delvare/
Cc: stable@vger.kernel.org
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Thu, 2 Nov 2023 19:52:30 +0000 (20:52 +0100)]
gfs2: don't withdraw if init_threads() got interrupted
commit
0cdc6f44e9fdc2d20d720145bf99a39f611f6d61 upstream.
In gfs2_fill_super(), when mounting a gfs2 filesystem is interrupted,
kthread_create() can return -EINTR. When that happens, we roll back
what has already been done and abort the mount.
Since commit
62dd0f98a0e5 ("gfs2: Flag a withdraw if init_threads()
fails), we are calling gfs2_withdraw_delayed() in gfs2_fill_super();
first via gfs2_make_fs_rw(), then directly. But gfs2_withdraw_delayed()
only marks the filesystem as withdrawing and relies on a caller further
up the stack to do the actual withdraw, which doesn't exist in the
gfs2_fill_super() case. Because the filesystem is marked as withdrawing
/ withdrawn, function gfs2_lm_unmount() doesn't release the dlm
lockspace, so when we try to mount that filesystem again, we get:
gfs2: fsid=gohan:gohan0: Trying to join cluster "lock_dlm", "gohan:gohan0"
gfs2: fsid=gohan:gohan0: dlm_new_lockspace error -17
Since commit
b77b4a4815a9 ("gfs2: Rework freeze / thaw logic"), the
deadlock this gfs2_withdraw_delayed() call was supposed to work around
cannot occur anymore because freeze_go_callback() won't take the
sb->s_umount semaphore unconditionally anymore, so we can get rid of the
gfs2_withdraw_delayed() in gfs2_fill_super() entirely.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Klaus Kudielka [Tue, 7 Nov 2023 17:44:02 +0000 (18:44 +0100)]
net: phylink: initialize carrier state at creation
commit
02d5fdbf4f2b8c406f7a4c98fa52aa181a11d733 upstream.
Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.
After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.
It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.
Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.
Fixes:
089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Sverdlin [Fri, 27 Oct 2023 06:57:38 +0000 (08:57 +0200)]
net: dsa: lan9303: consequently nested-lock physical MDIO
commit
5a22fbcc10f3f7d94c5d88afbbffa240a3677057 upstream.
When LAN9303 is MDIO-connected two callchains exist into
mdio->bus->write():
1. switch ports 1&2 ("physical" PHYs):
virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})->
lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested
2. LAN9303 virtual PHY:
virtual MDIO bus (lan9303_phy_{read|write}) ->
lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write}
If the latter functions just take
mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP
false-positive splat. It's false-positive because the first
mdio_lock in the second callchain above belongs to virtual MDIO bus, the
second mdio_lock belongs to physical MDIO bus.
Consequent annotation in lan9303_mdio_{read|write} as nested lock
(similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus)
prevents the following splat:
WARNING: possible circular locking dependency detected
5.15.71 #1 Not tainted
------------------------------------------------------
kworker/u4:3/609 is trying to acquire lock:
ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex
but task is already holding lock:
ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&bus->mdio_lock){+.+.}-{3:3}:
lock_acquire
__mutex_lock
mutex_lock_nested
lan9303_mdio_read
_regmap_read
regmap_read
lan9303_probe
lan9303_mdio_probe
mdio_probe
really_probe
__driver_probe_device
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
-> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}:
__lock_acquire
lock_acquire.part.0
lock_acquire
__mutex_lock
mutex_lock_nested
regmap_lock_mutex
regmap_read
lan9303_phy_read
dsa_slave_phy_read
__mdiobus_read
mdiobus_read
get_phy_device
mdiobus_scan
__mdiobus_register
dsa_register_switch
lan9303_probe
lan9303_mdio_probe
mdio_probe
really_probe
__driver_probe_device
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&bus->mdio_lock);
lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
lock(&bus->mdio_lock);
lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
*** DEADLOCK ***
5 locks held by kworker/u4:3/609:
#0:
ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work
#1:
ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work
#2:
ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach
#3:
ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch
#4:
ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
stack backtrace:
CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace
show_stack
dump_stack_lvl
dump_stack
print_circular_bug
check_noncircular
__lock_acquire
lock_acquire.part.0
lock_acquire
__mutex_lock
mutex_lock_nested
regmap_lock_mutex
regmap_read
lan9303_phy_read
dsa_slave_phy_read
__mdiobus_read
mdiobus_read
get_phy_device
mdiobus_scan
__mdiobus_register
dsa_register_switch
lan9303_probe
lan9303_mdio_probe
...
Cc: stable@vger.kernel.org
Fixes:
dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Lunn [Sat, 28 Oct 2023 19:25:11 +0000 (21:25 +0200)]
net: ethtool: Fix documentation of ethtool_sprintf()
commit
f55d8e60f10909dbc5524e261041e1d28d7d20d8 upstream.
This function takes a pointer to a pointer, unlike sprintf() which is
passed a plain pointer. Fix up the documentation to make this clear.
Fixes:
7888fe53b706 ("ethtool: Add common function for filling out strings")
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231028192511.100001-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harald Freudenberger [Mon, 23 Oct 2023 07:57:10 +0000 (09:57 +0200)]
s390/ap: fix AP bus crash on early config change callback invocation
commit
e14aec23025eeb1f2159ba34dbc1458467c4c347 upstream.
Fix kernel crash in AP bus code caused by very early invocation of the
config change callback function via SCLP.
After a fresh IML of the machine the crypto cards are still offline and
will get switched online only with activation of any LPAR which has the
card in it's configuration. A crypto card coming online is reported
to the LPAR via SCLP and the AP bus offers a callback function to get
this kind of information. However, it may happen that the callback is
invoked before the AP bus init function is complete. As the callback
triggers a synchronous AP bus scan, the scan may already run but some
internal states are not initialized by the AP bus init function resulting
in a crash like this:
[ 11.635859] Unable to handle kernel pointer dereference in virtual kernel address space
[ 11.635861] Failing address:
0000000000000000 TEID:
0000000000000887
[ 11.635862] Fault in home space mode while using kernel ASCE.
[ 11.635864] AS:
00000000894c4007 R3:
00000001fece8007 S:
00000001fece7800 P:
000000000000013d
[ 11.635879] Oops: 0004 ilc:1 [#1] SMP
[ 11.635882] Modules linked in:
[ 11.635884] CPU: 5 PID: 42 Comm: kworker/5:0 Not tainted 6.6.0-rc3-00003-g4dbf7cdc6b42 #12
[ 11.635886] Hardware name: IBM 3931 A01 751 (LPAR)
[ 11.635887] Workqueue: events_long ap_scan_bus
[ 11.635891] Krnl PSW :
0704c00180000000 0000000000000000 (0x0)
[ 11.635895] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[ 11.635897] Krnl GPRS:
0000000001000a00 0000000000000000 0000000000000006 0000000089591940
[ 11.635899]
0000000080000000 0000000000000a00 0000000000000000 0000000000000000
[ 11.635901]
0000000081870c00 0000000089591000 000000008834e4e2 0000000002625a00
[ 11.635903]
0000000081734200 0000038000913c18 000000008834c6d6 0000038000913ac8
[ 11.635906] Krnl Code:>
0000000000000000: 0000 illegal
[ 11.635906]
0000000000000002: 0000 illegal
[ 11.635906]
0000000000000004: 0000 illegal
[ 11.635906]
0000000000000006: 0000 illegal
[ 11.635906]
0000000000000008: 0000 illegal
[ 11.635906]
000000000000000a: 0000 illegal
[ 11.635906]
000000000000000c: 0000 illegal
[ 11.635906]
000000000000000e: 0000 illegal
[ 11.635915] Call Trace:
[ 11.635916] [<
0000000000000000>] 0x0
[ 11.635918] [<
000000008834e4e2>] ap_queue_init_state+0x82/0xb8
[ 11.635921] [<
000000008834ba1c>] ap_scan_domains+0x6fc/0x740
[ 11.635923] [<
000000008834c092>] ap_scan_adapter+0x632/0x8b0
[ 11.635925] [<
000000008834c3e4>] ap_scan_bus+0xd4/0x288
[ 11.635927] [<
00000000879a33ba>] process_one_work+0x19a/0x410
[ 11.635930] Discipline DIAG cannot be used without z/VM
[ 11.635930] [<
00000000879a3a2c>] worker_thread+0x3fc/0x560
[ 11.635933] [<
00000000879aea60>] kthread+0x120/0x128
[ 11.635936] [<
000000008792afa4>] __ret_from_fork+0x3c/0x58
[ 11.635938] [<
00000000885ebe62>] ret_from_fork+0xa/0x30
[ 11.635942] Last Breaking-Event-Address:
[ 11.635942] [<
000000008834c6d4>] ap_wait+0xcc/0x148
This patch improves the ap_bus_force_rescan() function which is
invoked by the config change callback by checking if a first
initial AP bus scan has been done. If not, the force rescan request
is simple ignored. Anyhow it does not make sense to trigger AP bus
re-scans even before the very first bus scan is complete.
Cc: stable@vger.kernel.org
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tam Nguyen [Thu, 2 Nov 2023 03:30:08 +0000 (10:30 +0700)]
i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
commit
e8183fa10c25c7b3c20670bf2b430ddcc1ee03c0 upstream.
During SMBus block data read process, we have seen high interrupt rate
because of TX_EMPTY irq status while waiting for block length byte (the
first data byte after the address phase). The interrupt handler does not
do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS.
Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives
first data byte from I2C device, then re-enable it to resume SMBus
transaction.
It takes 0.789 ms for host to receive data length from slave.
Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt.
And it is none after applying the patch.
Cc: stable@vger.kernel.org
Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darren Hart [Thu, 21 Sep 2023 09:02:36 +0000 (02:02 -0700)]
sbsa_gwdt: Calculate timeout with 64-bit math
commit
5d6aa89bba5bd6af2580f872b57f438dab883738 upstream.
Commit
abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
introduced new timer math for watchdog revision 1 with the 48 bit offset
register.
The gwdt->clk and timeout are u32, but the argument being calculated is
u64. Without a cast, the compiler performs u32 operations, truncating
intermediate steps, resulting in incorrect values.
A watchdog revision 1 implementation with a gwdt->clk of 1GHz and a
timeout of 600s writes
3647256576 to the one shot watchdog instead of
300000000000, resulting in the watchdog firing in 3.6s instead of 600s.
Force u64 math by casting the first argument (gwdt->clk) as a u64. Make
the order of operations explicit with parenthesis.
Fixes:
abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
Reported-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.14.x
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/7d1713c5ffab19b0f3de796d82df19e8b1f340de.1695286124.git.darren@os.amperecomputing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Mosnacek [Tue, 31 Oct 2023 12:32:07 +0000 (13:32 +0100)]
lsm: fix default return value for inode_getsecctx
commit
b36995b8609a5a8fe5cf259a1ee768fcaed919f8 upstream.
-EOPNOTSUPP is the return value that implements a "no-op" hook, not 0.
Without this fix having only the BPF LSM enabled (with no programs
attached) can cause uninitialized variable reads in
nfsd4_encode_fattr(), because the BPF hook returns 0 without touching
the 'ctxlen' variable and the corresponding 'contextlen' variable in
nfsd4_encode_fattr() remains uninitialized, yet being treated as valid
based on the 0 return value.
Cc: stable@vger.kernel.org
Fixes:
98e828a0650f ("security: Refactor declaration of LSM hooks")
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Mosnacek [Tue, 31 Oct 2023 12:32:06 +0000 (13:32 +0100)]
lsm: fix default return value for vm_enough_memory
commit
866d648059d5faf53f1cd960b43fe8365ad93ea7 upstream.
1 is the return value that implements a "no-op" hook, not 0.
Cc: stable@vger.kernel.org
Fixes:
98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Marko [Fri, 10 Nov 2023 09:30:11 +0000 (10:30 +0100)]
Revert "i2c: pxa: move to generic GPIO recovery"
commit
7b211c7671212cad0b83603c674838c7e824d845 upstream.
This reverts commit
0b01392c18b9993a584f36ace1d61118772ad0ca.
Conversion of PXA to generic I2C recovery, makes the I2C bus completely
lock up if recovery pinctrl is present in the DT and I2C recovery is
enabled.
So, until the generic I2C recovery can also work with PXA lets revert
to have working I2C and I2C recovery again.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johnathan Mantey [Mon, 13 Nov 2023 16:30:29 +0000 (08:30 -0800)]
Revert ncsi: Propagate carrier gain/loss events to the NCSI controller
commit
9e2e7efbbbff69d8340abb56d375dd79d1f5770f upstream.
This reverts commit
3780bb29311eccb7a1c9641032a112eed237f7e3.
The cited commit introduced unwanted behavior.
The intent for the commit was to be able to detect carrier loss/gain
for just the NIC connected to the BMC. The unwanted effect is a
carrier loss for auxiliary paths also causes the BMC to lose
carrier. The BMC never regains carrier despite the secondary NIC
regaining a link.
This change, when merged, needs to be backported to stable kernels.
5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable
Fixes:
3780bb29311e ("ncsi: Propagate carrier gain/loss events to the NCSI controller")
CC: stable@vger.kernel.org
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Binding [Wed, 15 Nov 2023 16:21:16 +0000 (16:21 +0000)]
ALSA: hda/realtek: Add quirks for HP Laptops
commit
5d639b60971f003d3a9b2b31f8ec73b0718b5d57 upstream.
These HP laptops use Realtek HDA codec combined with 2 or 4 CS35L41
Amplifiers using SPI with Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115162116.494968-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matus Malych [Tue, 14 Nov 2023 13:35:25 +0000 (14:35 +0100)]
ALSA: hda/realtek: Enable Mute LED on HP 255 G10
commit
b944aa9d86d5f782bfe5e51336434c960304839c upstream.
HP 255 G10 has a mute LED that can be made to work using quirk
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2.
Enable already existing quirk - at correct line to keep order
Signed-off-by: Matus Malych <matus@malych.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231114133524.11340-1-matus@malych.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chandradeep Dey [Sat, 11 Nov 2023 18:25:49 +0000 (19:25 +0100)]
ALSA: hda/realtek - Enable internal speaker of ASUS K6500ZC
commit
713f040cd22285fcc506f40a0d259566e6758c3c upstream.
Apply the already existing quirk chain ALC294_FIXUP_ASUS_SPK to enable
the internal speaker of ASUS K6500ZC.
Signed-off-by: Chandradeep Dey <codesigning@chandradeepdey.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/NizcVHQ--3-9@chandradeepdey.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>