scsi: iscsi: Fix session removal on shutdown

[ Upstream commit 31500e902759322ba3c64b60dabae2704e738df8 ]

When the system is shutting down, iscsid is not running so we will not get
a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown
will then hang waiting on userspace to remove the session.

This has libiscsi force the destruction of the session from the kernel when
iscsi_host_remove() is called from a driver's shutdown callout.

This fixes a regression added in qedi boot with commit d1f2ce77638d ("scsi:
qedi: Fix host removal with running sessions") which made qedi use the
common session removal function that waits on userspace instead of rolling
its own kernel based removal.

Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com
Fixes: d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions")
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Add helper to remove a session from the kernel

[ Upstream commit bb42856bfd54fda1cbc7c470fcf5db1596938f4f ]

During qedi shutdown we need to stop the iSCSI layer from sending new nops
as pings and from responding to target ones and make sure there is no
running connection cleanups. Commit d1f2ce77638d ("scsi: qedi: Fix host
removal with running sessions") converted the driver to use the libicsi
helper to drive session removal, so the above issues could be handled. The
problem is that during system shutdown iscsid will not be running so when
we try to remove the root session we will hang waiting for userspace to
reply.

Add a helper that will drive the destruction of sessions like these during
system shutdown.

Link: https://lore.kernel.org/r/20220616222738.5722-5-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Allow iscsi_if_stop_conn() to be called from kernel

[ Upstream commit 3328333b47f4163504267440ec0a36087a407a5f ]

iscsi_if_stop_conn() is only called from the userspace interface but in a
subsequent commit we will want to call it from the kernel interface to
allow drivers like qedi to remove sessions from inside the kernel during
shutdown. This removes the iscsi_uevent code from iscsi_if_stop_conn() so we
can call it in a new helper.

Link: https://lore.kernel.org/r/20220616222738.5722-3-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv

[ Upstream commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc ]

There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:

   (Interrupt context)
fw_dump_timer_fn
  mwifiex_upload_device_dump
    dev_coredumpv(..., GFP_KERNEL)
      dev_coredumpm()
        kzalloc(sizeof(*devcd), gfp); //may sleep
        dev_set_name
          kobject_set_name_vargs
            kvasprintf_const(GFP_KERNEL, ...); //may sleep
            kstrdup(s, GFP_KERNEL); //may sleep

The corresponding fail log is shown below:

[  135.275938] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[  135.281029] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
...
[  135.293613] Call Trace:
[  135.293613]  <IRQ>
[  135.293613]  dump_stack_lvl+0x57/0x7d
[  135.293613]  __might_resched.cold+0x138/0x173
[  135.293613]  ? dev_coredumpm+0xca/0x2e0
[  135.293613]  kmem_cache_alloc_trace+0x189/0x1f0
[  135.293613]  ? devcd_match_failing+0x30/0x30
[  135.293613]  dev_coredumpm+0xca/0x2e0
[  135.293613]  ? devcd_freev+0x10/0x10
[  135.293613]  dev_coredumpv+0x1c/0x20
[  135.293613]  ? devcd_match_failing+0x30/0x30
[  135.293613]  mwifiex_upload_device_dump+0x65/0xb0
[  135.293613]  ? mwifiex_dnld_fw+0x1b0/0x1b0
[  135.293613]  call_timer_fn+0x122/0x3d0
[  135.293613]  ? msleep_interruptible+0xb0/0xb0
[  135.293613]  ? lock_downgrade+0x3c0/0x3c0
[  135.293613]  ? __next_timer_interrupt+0x13c/0x160
[  135.293613]  ? lockdep_hardirqs_on_prepare+0xe/0x220
[  135.293613]  ? mwifiex_dnld_fw+0x1b0/0x1b0
[  135.293613]  __run_timers.part.0+0x3f8/0x540
[  135.293613]  ? call_timer_fn+0x3d0/0x3d0
[  135.293613]  ? arch_restore_msi_irqs+0x10/0x10
[  135.293613]  ? lapic_next_event+0x31/0x40
[  135.293613]  run_timer_softirq+0x4f/0xb0
[  135.293613]  __do_softirq+0x1c2/0x651
...
[  135.293613] RIP: 0010:default_idle+0xb/0x10
[  135.293613] RSP: 0018:ffff888006317e68 EFLAGS: 00000246
[  135.293613] RAX: ffffffff82ad8d10 RBX: ffff888006301cc0 RCX: ffffffff82ac90e1
[  135.293613] RDX: ffffed100d9ff1b4 RSI: ffffffff831ad140 RDI: ffffffff82ad8f20
[  135.293613] RBP: 0000000000000003 R08: 0000000000000000 R09: ffff88806cff8d9b
[  135.293613] R10: ffffed100d9ff1b3 R11: 0000000000000001 R12: ffffffff84593410
[  135.293613] R13: 0000000000000000 R14: 0000000000000000 R15: 1ffff11000c62fd2
...
[  135.389205] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end

This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.

[  134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[  135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end

As we can see, there is no bug now.

Fixes: f5ecd02a8b20 ("mwifiex: device dump support for usb interface")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/b63b77fc84ed3e8a6bef02378e17c7c71a0bc3be.1654569290.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Ignore BTCOEX events from the 88W8897 firmware

[ Upstream commit 84d94e16efa268e4f2887d858cd67ee37b870f25 ]

The firmware of the 88W8897 PCIe+USB card sends those events very
unreliably, sometimes bluetooth together with 2.4ghz-wifi is used and no
COEX event comes in, and sometimes bluetooth is disabled but the
coexistance mode doesn't get disabled.

This means we sometimes end up capping the rx/tx window size while
bluetooth is not enabled anymore, artifically limiting wifi speeds even
though bluetooth is not being used.

Since we can't fix the firmware, let's just ignore those events on the
88W8897 device. From some Wireshark capture sessions it seems that the
Windows driver also doesn't change the rx/tx window sizes when bluetooth
gets enabled or disabled, so this is fairly consistent with the Windows
driver.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211103205827.14559-1-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: Don't set Accessed/Dirty bits for ZERO_PAGE

[ Upstream commit a1040b0d42acf69bb4f6dbdc54c2dcd78eea1de5 ]

Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE.  The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed.  The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.

Fixes: 7df003c85218 ("KVM: fix overflow of zero page refcount with ksm running")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/memremap: fix memunmap_pages() race with get_dev_pagemap()

[ Upstream commit 1e57ffb6e3fd9583268c6462c4e3853575b21701 ]

Think about the below scene:

 CPU1 CPU2
 memunmap_pages
   percpu_ref_exit
     __percpu_ref_exit
       free_percpu(percpu_count);
         /* percpu_count is freed here! */
 get_dev_pagemap
   xa_load(&pgmap_array, PHYS_PFN(phys))
     /* pgmap still in the pgmap_array */
   percpu_ref_tryget_live(&pgmap->ref)
     if __ref_is_percpu
       /* __PERCPU_REF_ATOMIC_DEAD not set yet */
       this_cpu_inc(*percpu_count)
         /* access freed percpu_count here! */
      ref->percpu_count_ptr = __PERCPU_REF_ATOMIC_DEAD;
        /* too late... */
   pageunmap_range

To fix the issue, do percpu_ref_exit() after pgmap_array is emptied. So
we won't do percpu_ref_tryget_live() against a being freed percpu_ref.

Link: https://lkml.kernel.org/r/20220609121305.2508-1-linmiaohe@huawei.com
Fixes: b7b3c01b1915 ("mm/memremap_pages: support multiple ranges per invocation")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memremap: remove support for external pgmap refcounts

[ Upstream commit b80892ca022e9eb484771a66eb68e12364695a2a ]

No driver is left using the external pgmap refcount, so remove the
code to support it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20211028151017.50234-1-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/test_hmm: avoid accessing uninitialized pages

[ Upstream commit ed913b055a74b723976f8e885a3395162a0371e6 ]

If make_device_exclusive_range() fails or returns pages marked for
exclusive access less than required, remaining fields of pages will left
uninitialized.  So dmirror_atomic_map() will access those yet
uninitialized fields of pages.  To fix it, do dmirror_atomic_map() iff all
pages are marked for exclusive access (we will break if mapped is less
than required anyway) so we won't access those uninitialized fields of
pages.

Link: https://lkml.kernel.org/r/20220609130835.35110-1-linmiaohe@huawei.com
Fixes: b659baea7546 ("mm: selftests for exclusive device memory")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mediatek: reset: Fix written reset bit offset

[ Upstream commit edabcf71d100fd433a0fc2d0c97057c446c33b2a ]

Original assert/deassert bit is BIT(0), but it's more resonable to modify
them to BIT(id % 32) which is based on id.

This patch will not influence any previous driver because the reset is
only used for thermal. The id (MT8183_INFRACFG_AO_THERM_SW_RST) is 0.

Fixes: 64ebb57a3df6 ("clk: reset: Modify reset-controller driver")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-3-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: bma400: Reordering of header files

[ Upstream commit 1bd2dc6ea863690aee5c45ebf09c9194c7a42c0d ]

Reordering of header files and removing the iio/sysfs.h since
custom attributes are not being used in the driver.

Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220505133021.22362-3-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec: Always expose last resume result

[ Upstream commit 74bb746407bf0d7c7d126c7731dbcd66d467619b ]

The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.

Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.

Cc: Rajat Jain <rajatja@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 7235560ac77a ("platform/chrome: Add support for v1 of host sleep event")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: bma400: Fix the scale min and max macro values

[ Upstream commit 747c7cf1592e226d40543231b26502b332d0ea2f ]

Changing the scale macro values to match the bma400 sensitivity
for 1 LSB of all the available ranges.

Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400")
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220505133021.22362-2-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix no logout on delete for N2N

[ Upstream commit ec538eb838f334453b10e7e9b260f0c358018a37 ]

The driver failed to send implicit logout on session delete. For edif, this
failed to flush any lingering SA index in FW.

Set a flag to turn on implicit logout early in the session recovery to make
sure the logout will go out in case of error.

Link: https://lore.kernel.org/r/20220608115849.16693-8-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix session thrash

[ Upstream commit a8fdfb0b39c2b31722c70bdf2272b949d5af4b7b ]

Current code prematurely sends out PRLI before authentication application
has given the OK to do so. This causes PRLI failure and session teardown.

Prevents PRLI from going out before authentication app gives the OK.

Link: https://lore.kernel.org/r/20220608115849.16693-7-njavali@marvell.com
Fixes: 91f6f5fbe87b ("scsi: qla2xxx: edif: Reduce connection thrash")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Tear down session if keys have been removed

[ Upstream commit d7e2e4a68fc047a025afcd200e6b7e1fbc8b1999 ]

If all keys for a session have been deleted, trigger a session teardown.

Link: https://lore.kernel.org/r/20220608115849.16693-6-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix no login after app start

[ Upstream commit 24c796098f5395477f7f7ebf8e24f3f08a139f71 ]

The scenario is this: User loaded driver but has not started authentication
app. All sessions to secure device will exhaust all login attempts, fail,
and in stay in deleted state. Then some time later the app is started. The
driver will replenish the login retry count, trigger delete to prepare for
secure login. After deletion, relogin is triggered.

For the session that is already deleted, the delete trigger is a no-op. If
none of the sessions trigger a relogin, no progress is made.

Add a relogin trigger.

Link: https://lore.kernel.org/r/20220608115849.16693-5-njavali@marvell.com
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Reduce disruption due to multiple app start

[ Upstream commit 0dbfce5255fe8d069a1a3b712a25b263264cfa58 ]

Multiple app start can trigger a session bounce. Make driver skip over
session teardown if app start is seen more than once.

Link: https://lore.kernel.org/r/20220608115849.16693-4-njavali@marvell.com
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Send LOGO for unexpected IKE message

[ Upstream commit 2b659ed67a12f39f56d8dcad9b5d5a74d67c01b3 ]

If the session is down and the local port continues to receive AUTH ELS
messages, the driver needs to send back LOGO so that the remote device
knows to tear down its session. Terminate and clean up the AUTH ELS
exchange followed by a passthrough LOGO.

Link: https://lore.kernel.org/r/20220608115849.16693-3-njavali@marvell.com
Fixes: 225479296c4f ("scsi: qla2xxx: edif: Reject AUTH ELS on session down")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xtables: Bring SPDX identifier back

[ Upstream commit 20646f5b1e798bcc20044ae90ac3702f177bf254 ]

Commit e2be04c7f995 ("License cleanup: add SPDX license identifier to
uapi header files with a license") added the correct SPDX identifier to
include/uapi/linux/netfilter/xt_IDLETIMER.h.

A subsequent commit removed it for no reason and reintroduced the UAPI
license incorrectness as the file is now missing the UAPI exception
again.

Add it back and remove the GPLv2 boilerplate while at it.

Fixes: 68983a354a65 ("netfilter: xtables: Add snapshot of hardidletimer target")
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci: tegra: Fix error check

[ Upstream commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f ]

In the function tegra_xusb_powerdomain_init(),
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.

Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220524121404.18376-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()

[ Upstream commit f08aa7c80dac27ee00fa6827f447597d2fba5465 ]

dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.

Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220525135332.23144-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe

[ Upstream commit 302970b4cad3ebfda2c05ce06c322ccdc447d17e ]

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603141231.979-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe

[ Upstream commit b5c5b13cb45e2c88181308186b0001992cb41954 ]

of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 796bcae7361c ("USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220602110849.58549-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fpga: altera-pr-ip: fix unsigned comparison with less than zero

[ Upstream commit 2df84a757d87fd62869fc401119d429735377ec5 ]

Fix the "comparison with less than zero" warning reported by
cppcheck for the unsigned (size_t) parameter count of the
alt_pr_fpga_write() function.

Fixes: d201cc17a8a3 ("fpga pr ip: Core driver support for Altera Partial Reconfiguration IP")
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Link: https://lore.kernel.org/r/20220609140520.42662-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()

[ Upstream commit bf038503d5fe90189743124233fe7aeb0984e961 ]

of_get_child_by_name() returns a node pointer with refcount incremented, so
we should use of_node_put() on it when we don't need it anymore.

Add missing of_node_put() to avoid refcount leak.

Fixes: 814cceebba9b ("PCI: mediatek-gen3: Add INTx support")
Link: https://lore.kernel.org/r/20220601041259.56185-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: st_spi_fsm: Add a clk_disable_unprepare() in .probe()'s error path

[ Upstream commit 28607b426c3d050714f250d0faeb99d2e9106e90 ]

For all but one error path clk_disable_unprepare() is already there. Add
it to the one location where it's missing.

Fixes: 481815a6193b ("mtd: st_spi_fsm: Handle clk_prepare_enable/clk_disable_unprepare.")
Fixes: 69d5af8d016c ("mtd: st_spi_fsm: Obtain and use EMI clock")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: parsers: ofpart: Fix refcount leak in bcm4908_partitions_fw_offset

[ Upstream commit e607879b0da18c451de5e91daf239cc2f2f8ff2d ]

of_find_node_by_path() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bb17230c61a6 ("mtd: parsers: ofpart: support BCM4908 fixed partitions")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220605070726.5979-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: partitions: Fix refcount leak in parse_redboot_of

[ Upstream commit 9f7e62815cf3cbbcb1b8cb21649fb4dfdb3aa016 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 237960880960 ("mtd: partitions: redboot: seek fis-index-block in the right node")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220526110652.64849-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: sm_ftl: Fix deadlock caused by cancel_work_sync in sm_release

[ Upstream commit a61528d997619a518ee8c51cf0ef0513021afaff ]

There is a deadlock between sm_release and sm_cache_flush_work
which is a work item. The cancel_work_sync in sm_release will
not return until sm_cache_flush_work is finished. If we hold
mutex_lock and use cancel_work_sync to wait the work item to
finish, the work item also requires mutex_lock. As a result,
the sm_release will be blocked forever. The race condition is
shown below:

    (Thread 1)             |   (Thread 2)
sm_release                 |
  mutex_lock(&ftl->mutex)  | sm_cache_flush_work
                           |   mutex_lock(&ftl->mutex)
  cancel_work_sync         |   ...

This patch moves del_timer_sync and cancel_work_sync out of
mutex_lock in order to mitigate deadlock.

Fixes: 7d17c02a01a1 ("mtd: Add new SmartMedia/xD FTL")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220524044841.10517-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: cp2112: prevent a buffer overflow in cp2112_xfer()

[ Upstream commit 381583845d19cb4bd21c8193449385f3fefa9caf ]

Smatch warnings:
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy()
'data->block[1]' too small (33 vs 255)
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'buf' too
small (64 vs 255)

The 'read_length' variable is provided by 'data->block[0]' which comes
from user and it(read_length) can take a value between 0-255. Add an
upper bound to 'read_length' variable to prevent a buffer overflow in
memcpy().

Fixes: 542134c0375b ("HID: cp2112: Fix I2C_BLOCK_DATA transactions")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep()

[ Upstream commit e8fbd344a5ea62663554b8546b6bf9f88b93785a ]

pm_runtime_enable() will increase power disable depth.  If
dw_pcie_ep_init() fails, we should use pm_runtime_disable() to balance it
with pm_runtime_enable().

Add missing pm_runtime_disable() for tegra_pcie_config_ep().

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Link: https://lore.kernel.org/r/20220602031910.55859-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains()

[ Upstream commit f030304fdeb87ec8f1b518c73703214aec6cc24a ]

of_get_next_child() returns a node pointer with refcount incremented, so we
should use of_node_put() on it when we don't need it anymore.

mc_pcie_init_irq_domains() only calls of_node_put() in the normal path,
missing it in some error paths.  Add missing of_node_put() to avoid
refcount leak.

Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Link: https://lore.kernel.org/r/20220605055123.59127-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: samsung: exynosautov9-ufs: correct TSRV register configurations

[ Upstream commit f7fdc4db071f7ee7d408ea3f083222a060c76623 ]

For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register
configurations. So, it must be

s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g

Fixes: d64519249e1d ("phy: samsung-ufs: support exynosauto ufs phy driver")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220603050536.61957-1-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported

[ Upstream commit 3741aec4c38fa4123ab08ae552f05366d4fd05d8 ]

If NRIPS is supported in hardware but disabled in KVM, set next_rip to
the next RIP when advancing RIP as part of emulating INT3 injection.
There is no flag to tell the CPU that KVM isn't using next_rip, and so
leaving next_rip is left as is will result in the CPU pushing garbage
onto the stack when vectoring the injected event.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 66b7138f9136 ("KVM: SVM: Emulate nRIP feature when reinjecting INT3")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <cd328309a3b88604daa2359ad56f36cb565ce2d4.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"

[ Upstream commit cd9e6da8048c5b40315ee2d929b6230ce1252c3c ]

Unwind the RIP advancement done by svm_queue_exception() when injecting
an INT3 ultimately "fails" due to the CPU encountering a VM-Exit while
vectoring the injected event, even if the exception reported by the CPU
isn't the same event that was injected.  If vectoring INT3 encounters an
exception, e.g. #NP, and vectoring the #NP encounters an intercepted
exception, e.g. #PF when KVM is using shadow paging, then the #NP will
be reported as the event that was in-progress.

Note, this is still imperfect, as it will get a false positive if the
INT3 is cleanly injected, no VM-Exit occurs before the IRET from the INT3
handler in the guest, the instruction following the INT3 generates an
exception (directly or indirectly), _and_ vectoring that exception
encounters an exception that is intercepted by KVM.  The false positives
could theoretically be solved by further analyzing the vectoring event,
e.g. by comparing the error code against the expected error code were an
exception to occur when vectoring the original injected exception, but
SVM without NRIPS is a complete disaster, trying to make it 100% correct
is a waste of time.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 66b7138f9136 ("KVM: SVM: Emulate nRIP feature when reinjecting INT3")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <450133cf0a026cb9825a2ff55d02cb136a1cb111.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix n2n login retry for secure device

[ Upstream commit aec55325ddec975216119da000092cb8664a3399 ]

After initiator has burned up all login retries, target authentication
application begins to run. This triggers a link bounce on target side.
Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can
fail because of the mode mismatch with target. This patch add a few more
login retries to revive the connection.

Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix n2n discovery issue with secure target

[ Upstream commit 789d54a4178634850e441f60c0326124138e7269 ]

User failed to see disk via n2n topology. Driver used up all login retries
before authentication application started. When authentication application
started, driver did not have enough login retries to connect securely. On
app_start, driver will reset the login retry attempt count.

Link: https://lore.kernel.org/r/20220607044627.19563-10-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Add retry for ELS passthrough

[ Upstream commit 0b3f3143d473b489a7aa0779c43bcdb344bd3014 ]

Relating to EDIF, when sending IKE message, updating key or deleting key,
driver can encounter IOCB queue full. Add additional retries to reduce
higher level recovery.

Link: https://lore.kernel.org/r/20220607044627.19563-8-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Synchronize NPIV deletion with authentication application

[ Upstream commit cf79716e6636400ae38c37bc8a652b1e522abbba ]

Notify authentication application of a NPIV deletion event is about to
occur. This allows app to perform cleanup.

Link: https://lore.kernel.org/r/20220607044627.19563-7-njavali@marvell.com
Fixes: 9efea843a906 ("scsi: qla2xxx: edif: Add detection of secure device")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix inconsistent check of db_flags

[ Upstream commit 36f468bfe98c7de7916ab3391ee5dd6fd2549979 ]

db_flags field is a bit field. Replace value check with bit flag check.

Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Reduce connection thrash

[ Upstream commit 91f6f5fbe87ba834133fcc61d34881cb8ec9e518 ]

On ipsec start by remote port, target port may use RSCN to trigger
initiator to relogin. If driver is already in the process of a relogin,
then ignore the RSCN and allow the current relogin to continue. This
reduces thrashing of the connection.

Link: https://lore.kernel.org/r/20211026115412.27691-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix potential stuck session in sa update

[ Upstream commit e0fb8ce2bb9e52c846e54ad2c58b5b7beb13eb09 ]

When a thread is in the process of reestablish a session, a flag is set to
prevent multiple threads/triggers from doing the same task. This flag was
left on, and any attempt to relogin was locked out. Clear this flag if the
attempt has failed.

Link: https://lore.kernel.org/r/20220607044627.19563-6-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashing

[ Upstream commit 9c40c36e75ffd49952cd4ead0672defc4b4dbdf7 ]

This patch uses GFFID switch command to scan whether remote device is
Target or Initiator mode.  Based on that info, driver will not pass up
Initiator info to authentication application. This helps reduce unnecessary
stress for authentication application to deal with unused connections.

Link: https://lore.kernel.org/r/20220607044627.19563-2-njavali@marvell.com
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: check previous kernel's ima-kexec-buffer against memory bounds

[ Upstream commit cbf9c4b9617b6767886a913705ca14b7600c77db ]

Presently ima_get_kexec_buffer() doesn't check if the previous kernel's
ima-kexec-buffer lies outside the addressable memory range. This can result
in a kernel panic if the new kernel is booted with 'mem=X' arg and the
ima-kexec-buffer was allocated beyond that range by the previous kernel.
The panic is usually of the form below:

$ sudo kexec --initrd initrd vmlinux --append='mem=16G'

<snip>
 BUG: Unable to handle kernel data access on read at 0xc000c01fff7f0000
 Faulting instruction address: 0xc000000000837974
 Oops: Kernel access of bad area, sig: 11 [#1]
<snip>
 NIP [c000000000837974] ima_restore_measurement_list+0x94/0x6c0
 LR [c00000000083b55c] ima_load_kexec_buffer+0xac/0x160
 Call Trace:
 [c00000000371fa80] [c00000000083b55c] ima_load_kexec_buffer+0xac/0x160
 [c00000000371fb00] [c0000000020512c4] ima_init+0x80/0x108
 [c00000000371fb70] [c0000000020514dc] init_ima+0x4c/0x120
 [c00000000371fbf0] [c000000000012240] do_one_initcall+0x60/0x2c0
 [c00000000371fcc0] [c000000002004ad0] kernel_init_freeable+0x344/0x3ec
 [c00000000371fda0] [c0000000000128a4] kernel_init+0x34/0x1b0
 [c00000000371fe10] [c00000000000ce64] ret_from_kernel_thread+0x5c/0x64
 Instruction dump:
 f92100b8 f92100c0 90e10090 910100a0 4182050c 282a0017 3bc00000 40810330
 7c0802a6 fb610198 7c9b2378 f80101d0 <a1240000> 2c090001 40820614 e9240010
 ---[ end trace 0000000000000000 ]---

Fix this issue by checking returned PFN range of previous kernel's
ima-kexec-buffer with page_is_ram() to ensure correct memory bounds.

Fixes: 467d27824920 ("powerpc: ima: get the kexec buffer passed by the previous kernel")
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Prakhar Srivastava <prsriva@linux.microsoft.com>
Cc: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Ritesh Harjani <ritesh.list@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220531041446.3334259-1-vaibhav@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: meson: Fix a potential double free issue

[ Upstream commit ec0da06337751b18f6dee06b6526e0f0d6e80369 ]

When meson_nfc_nand_chip_cleanup() is called, it will call:
meson_nfc_free_buffer(&meson_chip->nand);
nand_cleanup(&meson_chip->nand);

nand_cleanup() in turn will call nand_detach() which calls the
.detach_chip() which is here meson_nand_detach_chip().

meson_nand_detach_chip() already calls meson_nfc_free_buffer(), so we
could double free some memory.

Fix it by removing the unneeded explicit call to meson_nfc_free_buffer().

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/ec15c358b8063f7c50ff4cd628cf0d2e14e43f49.1653064877.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: maps: Fix refcount leak in ap_flash_init

[ Upstream commit 77087a04c8fd554134bddcb8a9ff87b21f357926 ]

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220523143255.4376-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: maps: Fix refcount leak in of_flash_probe_versatile

[ Upstream commit 33ec82a6d2b119938f26e5c8040ed5d92378eb54 ]

of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220523140205.48625-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r9a06g032: Fix UART clkgrp bitsel

[ Upstream commit 2dee50ab9e72a3cae75b65e5934c8dd3e9bf01bc ]

There are two UART clock groups, each having a mux to select its
upstream clock source. The register/bit definitions for accessing these
two muxes appear to have been reversed since introduction. Correct them
so as to match the hardware manual.

Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver")

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Don't show client init failed as error when discovery fails

[ Upstream commit e51d8d3ea3d773334d2c047c8d1623dba66f592a ]

When sensor discovery fails, this means that the system doesn't have
any sensors connected and a user should only be notified at most one time.
A message is already displayed at WARN level of "failed to discover,
sensors not enabled".  It's pointless to show that the client init failed
at ERR level for the same condition.

Check the return code and don't display this message in those conditions.

Fixes: b5d7f43e97da ("HID: amd_sfh: Add support for sensor discovery")
Reported-by: David Chang <David.Chang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireguard: allowedips: don't corrupt stack when detecting overflow

[ Upstream commit c31b14d86dfe7174361e8c6e5df6c2c3a4d5918c ]

In case push_rcu() and related functions are buggy, there's a
WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In
case it is hit, we shouldn't corrupt the kernel's stack, though;
otherwise it may be hard to even receive the report that it's buggy. So
conditionalize the stack write based on that WARN_ON()'s return value.

Note that this never *actually* happens anyway. The WARN_ON() in the
first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever
actually hit. This is just a debugging sanity check.

Additionally, hoist the constant 128 into a named enum,
MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireguard: ratelimiter: use hrtimer in selftest

[ Upstream commit 151c8e499f4705010780189377f85b57400ccbf5 ]

Using msleep() is problematic because it's compared against
ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems
with slow jiffies (such as UML's forced HZ=100), the result is
inaccurate. So switch to using schedule_hrtimeout().

However, hrtimer gives us access only to the traditional posix timers,
and none of the _COARSE variants. So now, rather than being too
imprecise like jiffies, it's too precise.

One solution would be to give it a large "range" value, but this will
still fire early on a loaded system. A better solution is to align the
timeout to the actual coarse timer, and then round up to the nearest
tick, plus change.

So add the timeout to the current coarse time, and then
schedule_hrtimer() until the absolute computed time.

This should hopefully reduce flakes in CI as well. Note that we keep the
retry loop in case the entire function is running behind, because the
test could still be scheduled out, by either the kernel or by the
hypervisor's kernel, in which case restarting the test and hoping to not
be scheduled out still helps.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: make USB_RTL8153_ECM non user configurable

[ Upstream commit f56530dcdb0684406661ac9f1accf48319d07600 ]

This refixes:

    commit 7da17624e7948d5d9660b910f8079d26d26ce453
    nt: usb: USB_RTL8153_ECM should not default to y

    In general, device drivers should not be enabled by default.

which basically broke the commit it claimed to fix, ie:

    commit 657bc1d10bfc23ac06d5d687ce45826c760744f9
    r8153_ecm: avoid to be prior to r8152 driver

    Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled
    as modules. Otherwise, the r8153_ecm would be used, even though the
    device is supported by r8152 driver.

this commit amounted to:

drivers/net/usb/Kconfig:

+config USB_RTL8153_ECM
+       tristate "RTL8153 ECM support"
+       depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n)
+       default y
+       help
+         This option supports ECM mode for RTL8153 ethernet adapter, when
+         CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not
+         supported by r8152 driver.

drivers/net/usb/Makefile:

-obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o
+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_RTL8153_ECM)  += r8153_ecm.o

And as can be seen it pulls a piece of the cdc_ether driver out into
a separate config option to be able to make this piece modular in case
cdc_ether is builtin, while r8152 is modular.

While in general, device drivers should indeed not be enabled by default:
this isn't a device driver per say, but rather this is support code for
the CDCETHER (ECM) driver, and should thus be enabled if it is enabled.

See also email thread at:
  https://www.spinics.net/lists/netdev/msg767649.html

In:
  https://www.spinics.net/lists/netdev/msg768284.html

Jakub wrote:
  And when we say "removed" we can just hide it from what's prompted
  to the user (whatever such internal options are called)? I believe
  this way we don't bring back Marek's complaint.

Side note: these incorrect defaults will result in Android 13
on 5.15 GKI kernels lacking USB_RTL8153_ECM support while having
USB_NET_CDCETHER (luckily we also have USB_RTL8150 and USB_RTL8152,
so it's probably only an issue for very new RTL815x hardware with
no native 5.15 driver).

Fixes: 7da17624e7948d5d ("nt: usb: USB_RTL8153_ECM should not default to y")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hayes Wang <hayeswang@realtek.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20220730230113.4138858-1-zenczykowski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock

[ Upstream commit a41b17ff9dacd22f5f118ee53d82da0f3e52d5e3 ]

In the case of sk->dccps_qpolicy == DCCPQ_POLICY_PRIO, dccp_qpolicy_full
will drop a skb when qpolicy is full. And the lock in dccp_sendmsg is
released before sock_alloc_send_skb and then relocked after
sock_alloc_send_skb. The following conditions may lead dccp_qpolicy_push
to add skb to an already full sk_write_queue:

thread1--->lock
thread1--->dccp_qpolicy_full: queue is full. drop a skb
thread1--->unlock
thread2--->lock
thread2--->dccp_qpolicy_full: queue is not full. no need to drop.
thread2--->unlock
thread1--->lock
thread1--->dccp_qpolicy_push: add a skb. queue is full.
thread1--->unlock
thread2--->lock
thread2--->dccp_qpolicy_push: add a skb!
thread2--->unlock

Fix this by moving dccp_qpolicy_full.

Fixes: b1308dc015eb ("[DCCP]: Set TX Queue Length Bounds via Sysctl")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220729110027.40569-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ionic: fix error check for vlan flags in ionic_set_nic_features()

[ Upstream commit a86e86db5e6d72c82724a63ca1c5293409a21518 ]

The prototype of input features of ionic_set_nic_features() is
netdev_features_t, but the vlan_flags is using the private
definition of ionic drivers. It should use the variable
ctx.cmd.lif_setattr.features, rather than features to check
the vlan flags. So fixes it.

Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: rose: fix netdev reference changes

[ Upstream commit 931027820e4dafabc78aff82af59f8c1c4bd3128 ]

Bernard reported that trying to unload rose module would lead
to infamous messages:

unregistered_netdevice: waiting for rose0 to become free. Usage count = xx

This patch solves the issue, by making sure each socket referring to
a netdevice holds a reference count on it, and properly releases it
in rose_release().

rose_dev_first() is also fixed to take a device reference
before leaving the rcu_read_locked section.

Following patch will add ref_tracker annotations to ease
future bug hunting.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netdevsim: Avoid allocation warnings triggered from user space

[ Upstream commit d0b80a9edb1a029ff913e81b47540e57ad034329 ]

We need to suppress warnings from sily map sizes. Also switch
from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood
the flags when writing this code.

Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload")
Reported-by: syzbot+ad24705d3fd6463b18c6@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220726213605.154204-1-kuba@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix 'tc qdisc show' listing too many queues

[ Upstream commit 93cb804edab1b9a5bb7bb7b6824012dbb20abf22 ]

Fix tc qdisc show dev <ethX> root displaying too many fq_codel qdiscs.
tc_modify_qdisc, which is caller of ndo_setup_tc, expects driver to call
netif_set_real_num_tx_queues, which prepares qdiscs.
Without this patch, fq_codel qdiscs would not be adjusted to number of
queues on VF.
e.g.:
tc qdisc show dev <ethX>
qdisc mq 0: root
qdisc fq_codel 0: parent :4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent :3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent :2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent :1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
tc qdisc add dev <ethX> root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 queues 1@0 1@1 hw 1 mode channel shaper bw_rlimit max_rate 5000Mbit 150Mbit
tc qdisc show dev <ethX>
qdisc mqprio 8003: root tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
             queues:(0:0) (1:1)
             mode:channel
             shaper:bw_rlimit   max_rate:5Gbit 150Mbit
qdisc fq_codel 0: parent 8003:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8003:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8003:2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8003:1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64

While after fix:
tc qdisc add dev <ethX> root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 queues 1@0 1@1 hw 1 mode channel shaper bw_rlimit max_rate 5000Mbit 150Mbit
tc qdisc show dev <ethX> #should show 2, shows 4
qdisc mqprio 8004: root tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
             queues:(0:0) (1:1)
             mode:channel
             shaper:bw_rlimit   max_rate:5Gbit 150Mbit
qdisc fq_codel 0: parent 8004:2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8004:1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64

Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Co-developed-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix max_rate limiting

[ Upstream commit ec60d54cb9a3d43a02c5612a03093c18233e6601 ]

Fix max_rate option in TC, check for proper quanta boundaries.
Check for minimum value provided and if it fits expected 50Mbps
quanta.

Without this patch, iavf could send settings for max_rate limiting
that would be accepted from by PF even the max_rate option is less
than expected 50Mbps quanta. It results in no rate limiting
on traffic as rate limiting will be floored to 0.

Example:
tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \
2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \
max_rate 50Mbps 500Mbps 500Mbps

Should limit TC0 to circa 50 Mbps

tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \
2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \
max_rate 0Mbps 100Kbit 500Mbps

Should return error

Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw88: check the return value of alloc_workqueue()

[ Upstream commit 42bbf810e155efc6129a3a648ae5300f00b79d7b ]

The function alloc_workqueue() in rtw_core_init() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.

Fixes: fe101716c7c9d ("rtw88: replace tx tasklet with work queue")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220723063756.2956189-1-williamsukatube@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

netdevsim: fib: Fix reference count leak on route deletion failure

[ Upstream commit 180a6a3ee60a7cb69ed1232388460644f6a21f00 ]

As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes
and holds a reference on FIB info structures that in turn hold a
reference on the associated nexthop device(s).

In the unlikely case where we are unable to allocate memory to process a
route deletion request, netdevsim will not release the reference from
the associated FIB info structure, thereby preventing the associated
nexthop device(s) from ever being removed [1].

Fix this by scheduling a work item that will flush netdevsim's FIB table
upon route deletion failure. This will cause netdevsim to release its
reference from all the FIB info structures in its table.

Reported by Lucas Leong of Trend Micro Zero Day Initiative.

Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: allow unbound socket for packets in VRF when tcp_l3mdev_accept set

[ Upstream commit 944fd1aeacb627fa617f85f8e5a34f7ae8ea4d8e ]

The commit 3c82a21f4320 ("net: allow binding socket in a VRF when
there's an unbound socket") changed the inet socket lookup to avoid
packets in a VRF from matching an unbound socket. This is to ensure the
necessary isolation between the default and other VRFs for routing and
forwarding. VRF-unaware processes running in the default VRF cannot
access another VRF and have to be run with 'ip vrf exec <vrf>'. This is
to be expected with tcp_l3mdev_accept disabled, but could be reallowed
when this sysctl option is enabled. So instead of directly checking dif
and sdif in inet[6]_match, here call inet_sk_bound_dev_eq(). This
allows a match on unbound socket for non-zero sdif i.e. for packets in
a VRF, if tcp_l3mdev_accept is enabled.

Fixes: 3c82a21f4320 ("net: allow binding socket in a VRF when there's an unbound socket")
Signed-off-by: Mike Manning <mvrmanning@gmail.com>
Link: https://lore.kernel.org/netdev/a54c149aed38fded2d3b5fdb1a6c89e36a083b74.camel@lasnet.de/
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: add READ_ONCE(sk->sk_bound_dev_if) in INET6_MATCH()

[ Upstream commit 5d368f03280d3678433a7f119efe15dfbbb87bc8 ]

INET6_MATCH() runs without holding a lock on the socket.

We probably need to annotate most reads.

This patch makes INET6_MATCH() an inline function
to ease our changes.

v2: inline function only defined if IS_ENABLED(CONFIG_IPV6)
    Change the name to inet6_match(), this is no longer a macro.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inet: add READ_ONCE(sk->sk_bound_dev_if) in INET_MATCH()

[ Upstream commit 4915d50e300e96929d2462041d6f6c6f061167fd ]

INET_MATCH() runs without holding a lock on the socket.

We probably need to annotate most reads.

This patch makes INET_MATCH() an inline function
to ease our changes.

v2:

We remove the 32bit version of it, as modern compilers
should generate the same code really, no need to
try to be smarter.

Also make 'struct net *net' the first argument.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/sec - fix auth key size error

[ Upstream commit 45f5d0176d8426cc1ab0bab84fbd8ef5c57526c6 ]

The authentication algorithm supports a maximum of 128-byte keys.
The allocated key memory is insufficient.

Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of

[ Upstream commit fa4d57b85786ec0e16565c75a51c208834b0c24d ]

Without MODULE_DEVICE_TABLE, crypto_safexcel.ko module is not automatically
loaded on platforms where inside-secure crypto HW is specified in device
tree (e.g. Armada 3720). So add missing MODULE_DEVICE_TABLE for of.

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq

[ Upstream commit 98dfa9343f37bdd4112966292751e3a93aaf2e56 ]

The hpre encryption driver may be used to encrypt and decrypt packets
during the rx softirq, it is not allowed to use GFP_KERNEL.

Fixes: c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Adjust log_max_qp to be 18 at most

[ Upstream commit a6e9085d791f8306084fd5bc44dd3fdd4e1ac27b ]

The cited commit limited log_max_qp to be 17 due to FW capabilities.
Recently, it turned out that there are old FW versions that supported
more than 17, so the cited commit caused a degradation.

Thus, set the maximum log_max_qp back to 18 as it was before the
cited commit.

Fixes: 7f839965b2d7 ("net/mlx5: Update log_max_qp value to be 17 at most")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS

[ Upstream commit 562696c3c62c7c23dd896e9447252ce9268cb812 ]

MLX5E_MAX_RQ_NUM_MTTS should be the maximum value, so that
MLX5_MTT_OCTW(MLX5E_MAX_RQ_NUM_MTTS) fits into u16. The current value of
1 << 17 results in MLX5_MTT_OCTW(1 << 17) = 1 << 16, which doesn't fit
into u16. This commit replaces it with the maximum value that still
fits u16.

Fixes: 73281b78a37a ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version

[ Upstream commit 115d9f95ea7ab780ef315dc356bebba2e07cb731 ]

The driver reports whether TX/RX TLS device offloads are supported, but
not which ciphers/versions, these should be handled by returning
-EOPNOTSUPP when .tls_dev_add() is called.

Remove the WARN_ON kernel trace when the driver gets a request to
offload a cipher/version that is not supported as it is expected.

Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: hevc: Add check for invalid timestamp

[ Upstream commit 143201a6435bf65f0115435e9dc6d95c66b908e9 ]

Not all DPB entries will be used most of the time. Unused entries will
thus have invalid timestamps. They will produce negative buffer index
which is not specifically handled. This works just by chance in current
code. It will even produce bogus pointer, but since it's not used, it
won't do any harm.

Let's fix that brittle design by skipping writing DPB entry altogether
if timestamp is invalid.

Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: libertas: Fix possible refcount leak in if_usb_probe()

[ Upstream commit 6fd57e1d120bf13d4dc6c200a7cf914e6347a316 ]

usb_get_dev will be called before lbs_get_firmware_async which means that
usb_put_dev need to be called when lbs_get_firmware_async fails.

Fixes: ce84bb69f50e ("libertas USB: convert to asynchronous firmware loading")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220620092350.39960-1-hbh25y@gmail.com
Link: https://lore.kernel.org/r/20220622113402.16969-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue

[ Upstream commit 14a3aacf517a9de725dd3219dbbcf741e31763c4 ]

After successfull station association, if station queues are disabled for
some reason, the related lists are not emptied. So if some new element is
added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old
one and produce a BUG like this:

[   46.535263] list_add corruption. prev->next should be next (ffff94c1c318a360), but was 0000000000000000. (prev=ffff94c1d02d3388).
[   46.535283] ------------[ cut here ]------------
[   46.535284] kernel BUG at lib/list_debug.c:26!
[   46.535290] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   46.585304] CPU: 0 PID: 623 Comm: wpa_supplicant Not tainted 5.19.0-rc3+ #1
[   46.592380] Hardware name: Dell Inc. Inspiron 660s/0478VN       , BIOS A07 08/24/2012
[   46.600336] RIP: 0010:__list_add_valid.cold+0x3d/0x3f
[   46.605475] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 c8 40 67 93 e8 20 cc fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 70 40 67 93 e8 09 cc fd ff <0f> 0b 48 89 fe 48 c7 c7 00 41 67 93 e8 f8 cb fd ff 0f 0b 48 89 d1
[   46.624469] RSP: 0018:ffffb20800ab76d8 EFLAGS: 00010286
[   46.629854] RAX: 0000000000000075 RBX: ffff94c1c318a0e0 RCX: 0000000000000000
[   46.637105] RDX: 0000000000000201 RSI: ffffffff9365e100 RDI: 00000000ffffffff
[   46.644356] RBP: ffff94c1c5f43370 R08: 0000000000000075 R09: 3064316334396666
[   46.651607] R10: 3364323064316334 R11: 39666666663d7665 R12: ffff94c1c5f43388
[   46.658857] R13: ffff94c1d02d3388 R14: ffff94c1c318a360 R15: ffff94c1cf2289c0
[   46.666108] FS:  00007f65634ff7c0(0000) GS:ffff94c1da200000(0000) knlGS:0000000000000000
[   46.674331] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   46.680170] CR2: 00007f7dfe984460 CR3: 000000010e894003 CR4: 00000000000606f0
[   46.687422] Call Trace:
[   46.689906]  <TASK>
[   46.691950]  iwl_mvm_mac_wake_tx_queue+0xec/0x15c [iwlmvm]
[   46.697601]  ieee80211_queue_skb+0x4b3/0x720 [mac80211]
[   46.702973]  ? sta_info_get+0x46/0x60 [mac80211]
[   46.707703]  ieee80211_tx+0xad/0x110 [mac80211]
[   46.712355]  __ieee80211_tx_skb_tid_band+0x71/0x90 [mac80211]
...

In order to avoid this problem, we must also remove the related lists when
station queues are disabled.

Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model")
Reported-by: Takayuki Nagata <tnagata@redhat.com>
Reported-by: Petr Stourac <pstourac@redhat.com>
Tested-by: Petr Stourac <pstourac@redhat.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220719153542.81466-1-jtornosm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`

[ Upstream commit d578e0af3a003736f6c440188b156483d451b329 ]

Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:

  warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
           return rc;
                  ^~

Remove rc variable and just return the passed in length if the
memdup_user() succeeds.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7a4836560a6198d245d5732e26f94898b12eb760 ("wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()")
Fixes: ff974e4083341383d3dd4079e52ed30f57f376f0 ("wil6210: debugfs interface to send raw WMI command")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220724202452.61846-1-ammar.faizi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mux-gpmux: Add of_node_put() when breaking out of loop

[ Upstream commit 6435319c34704994e19b0767f6a4e6f37439867b ]

In i2c_mux_probe(), we should call of_node_put() when breaking out
of for_each_child_of_node() which will automatically increase and
decrease the refcount.

Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: cadence: Support PEC for SMBus block read

[ Upstream commit 9fdf6d97f03035ad5298e2d1635036c74c2090ed ]

SMBus packet error checking (PEC) is implemented by appending one
additional byte of checksum data at the end of the message. This provides
additional protection and allows to detect data corruption on the I2C bus.

SMBus block reads support variable length reads. The first byte in the read
message is the number of available data bytes.

The combination of PEC and block read is currently not supported by the
Cadence I2C driver.
 * When PEC is enabled the maximum transfer length for block reads
   increases from 33 to 34 bytes.
 * The I2C core smbus emulation layer relies on the driver updating the
   `i2c_msg` `len` field with the number of received bytes. The updated
   length is used when checking the PEC.

Add support to the Cadence I2C driver for handling SMBus block reads with
PEC. To determine the maximum transfer length uses the initial `len` value
of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled
it will be 1.

Once a read transfer is done also increment the `len` field by the amount
of received data bytes.

This change has been tested with a UCM90320 PMBus power monitor, which
requires block reads to access certain data fields, but also has PEC
enabled by default.

Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_intel: Add check for platform_driver_register

[ Upstream commit ab2d2a982ff721f4b029282d9a40602ea46a745e ]

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: pch_can: pch_can_error(): initialize errc before using it

[ Upstream commit 9950f11211331180269867aef848c7cf56861742 ]

After commit 3a5c7e4611dd, the variable errc is accessed before being
initialized, c.f. below W=2 warning:

| In function 'pch_can_error',
|     inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4:
| drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized]
|   501 |                 cf->data[6] = errc & PCH_TEC;
|       |                             ^
| drivers/net/can/pch_can.c: In function 'pch_can_poll':
| drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here
|   484 |         u32 errc, lec;
|       |             ^~~~

Moving errc initialization up solves this issue.

Fixes: 3a5c7e4611dd ("can: pch_can: do not report txerr and rxerr during bus-off")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: error: specify the values of data[5..7] of CAN error frames

[ Upstream commit e70a3263a7eed768d5f947b8f2aff8d2a79c9d97 ]

Currently, data[5..7] of struct can_frame, when used as a CAN error
frame, are defined as being "controller specific". Device specific
behaviours are problematic because it prevents someone from writing
code which is portable between devices.

As a matter of fact, data[5] is never used, data[6] is always used to
report TX error counter and data[7] is always used to report RX error
counter. can-utils also relies on this.

This patch updates the comment in the uapi header to specify that
data[5] is reserved (and thus should not be used) and that data[6..7]
are used for error counters.

Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module")
Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: usb_8dev: do not report txerr and rxerr during bus-off

[ Upstream commit aebe8a2433cd090ccdc222861f44bddb75eb01de ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off

[ Upstream commit a57732084e06791d37ea1ea447cca46220737abd ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 7259124eac7d1 ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off

[ Upstream commit 936e90595376e64b6247c72d3ea8b8b164b7ac96 ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: sun4i_can: do not report txerr and rxerr during bus-off

[ Upstream commit 0ac15a8f661b941519379831d09bfb12271b23ee ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr
CC: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: hi311x: do not report txerr and rxerr during bus-off

[ Upstream commit a22bd630cfff496b270211745536e50e98eb3a45 ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: sja1000: do not report txerr and rxerr during bus-off

[ Upstream commit 164d7cb2d5a30f1b3a5ab4fab1a27731fb1494a8 ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 215db1856e83 ("can: sja1000: Consolidate and unify state change handling")
Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rcar_can: do not report txerr and rxerr during bus-off

[ Upstream commit a37b7245e831a641df360ca41db6a71c023d3746 ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: pch_can: do not report txerr and rxerr during bus-off

[ Upstream commit 3a5c7e4611ddcf0ef37a3a17296b964d986161a6 ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 0c78ab76a05c ("pch_can: Add setting TEC/REC statistics processing")
Link: https://lore.kernel.org/all/20220719143550.3681-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: fix an snprintf() overflow check

[ Upstream commit b77ffb30cfc5f58e957571d8541c6a7e3da19221 ]

The snprintf() function returns the number of bytes it *would* have
copied if there were enough space.  So it can return > the
sizeof(gen->attach_target).

Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+oAySqIhFl6/J@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix a test for snprintf() overflow

[ Upstream commit c5d22f4cfe8dfb93f1db0a1e7e2e7ebc41395d98 ]

The snprintf() function returns the number of bytes which *would*
have been copied if there were space.  In other words, it can be
> sizeof(pin_path).

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+aD/tZMkgOUw+@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: p54: add missing parentheses in p54_flush()

[ Upstream commit bcfd9d7f6840b06d5988c7141127795cf405805e ]

The assignment of the value to the variable total in the loop
condition must be enclosed in additional parentheses, since otherwise,
in accordance with the precedence of the operators, the conjunction
will be performed first, and only then the assignment.

Due to this error, a warning later in the function after the loop may
not occur in the situation when it should.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 0d4171e2153b ("p54: implement flush callback")
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220714134831.106004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: p54: Fix an error handling path in p54spi_probe()

[ Upstream commit 83781f0162d080fec7dcb911afd1bc2f5ad04471 ]

If an error occurs after a successful call to p54spi_request_firmware(), it
must be undone by a corresponding release_firmware() as already done in
the error handling path of p54spi_request_firmware() and in the .remove()
function.

Add the missing call in the error handling path and remove it from
p54spi_request_firmware() now that it is the responsibility of the caller
to release the firmware

Fixes: cd8d3d321285 ("p54spi: p54spi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/297d2547ff2ee627731662abceeab9dbdaf23231.1655068321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()

[ Upstream commit 7a4836560a6198d245d5732e26f94898b12eb760 ]

The simple_write_to_buffer() function will succeed if even a single
byte is initialized.  However, we need to initialize the whole buffer
to prevent information leaks.  Just use memdup_user().

Fixes: ff974e408334 ("wil6210: debugfs interface to send raw WMI command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/Ysg14NdKAZF/hcNG@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: staging: media: hantro: Fix typos

[ Upstream commit d8f6f1c56d5469e22eeb7cc1f3580b29e2f0fef5 ]

Fix typos in comments within the Hantro driver.

Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hevc: Embedded indexes in RPS

[ Upstream commit d95a63daca85f4bca3b70e622c75586b5bf0ea5c ]

Reference Picture Set lists provide indices of short and long term
reference in DBP array.
Fix Hantro to not do a look up in DBP entries.
Make documentation more clear about it.

[hverkuil: fix typo in commit log]

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Simplify postprocessor

[ Upstream commit 53a3e71095c572333ceea30762565dbedec951ca ]

Add a 'postprocessed' boolean property to struct hantro_fmt
to signal that a format is produced by the post-processor.
This will allow to introduce the G2 post-processor in a simple way.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: postproc: Fix motion vector space size

[ Upstream commit 9393761aec4c56b7f2f19d21f806d316731401c1 ]

When the post-processor hardware block is enabled, the driver
allocates an internal queue of buffers for the decoder enginer,
and uses the vb2 queue for the post-processor engine.

For instance, on a G1 core, the decoder engine produces NV12 buffers
and the post-processor engine can produce YUY2 buffers. The decoder
engine expects motion vectors to be appended to the NV12 buffers,
but this is only required for CODECs that need motion vectors,
such as H.264.

Fix the post-processor logic accordingly.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: h265: Fix flag name

[ Upstream commit 104a70e1d0bcef28db13c4192b8729086089651c ]

Bit 21 in register 0x24 (slice header info 1) actually represents
negated version of low delay flag. This can be seen in vendor Cedar
library source code. While this flag is not part of the standard, it can
be found in reference HEVC implementation.

Fix macro name and change it to flag.

Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: check FMODE_LSEEK to control internal pipe splicing

[ Upstream commit 97ef77c52b789ec1411d360ed99dca1efe4b2c81 ]

The original direct splicing mechanism from Jens required the input to
be a regular file because it was avoiding the special socket case. It
also recognized blkdevs as being close enough to a regular file. But it
forgot about chardevs, which behave the same way and work fine here.

This is an okayish heuristic, but it doesn't totally work. For example,
a few chardevs should be spliceable here. And a few regular files
shouldn't. This patch fixes this by instead checking whether FMODE_LSEEK
is set, which represents decently enough what we need rewinding for when
splicing to internal pipes.

Fixes: b92ce5589374 ("[PATCH] splice: add direct fd <-> fd splicing support")
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix subprog names in stack traces.

[ Upstream commit 9c7c48d6a1e2eb5192ad5294c1c4dbd42a88e88b ]

The commit 7337224fc150 ("bpf: Improve the info.func_info and info.func_info_rec_size behavior")
accidently made bpf_prog_ksym_set_name() conservative for bpf subprograms.
Fixed it so instead of "bpf_prog_tag_F" the stack traces print "bpf_prog_tag_full_subprog_name".

Fixes: 7337224fc150 ("bpf: Improve the info.func_info and info.func_info_rec_size behavior")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220714211637.17150-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: timers: clocksource-switch: fix passing errors from child

[ Upstream commit 4d8f52ac5fa9eede7b7aa2f2d67c841d9eeb655f ]

The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.

Fixes: 7290ce1423c3 ("selftests/timers: Add clocksource-switch test from timetest suite")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>