mt76: mt7915: increase tx retry count

Set it to 15 to match reference driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: clean up station stats polling and rate control update

Queueing a per-sta work item from the tx free path can become very expensive
under load. This work is only supposed to pull rate control stats every
second and deal with rate control changes.

Additionally, the rate control update code was wrong, because it was
confusing bit masks and bit numbers in test_bit.

Fix this by introducing a dedicated device work item for rate control
updates, and by polling station stats from the phy mac work.
Stations requiring polling or rate control updates are added to lists
protected by dev->sta_poll_lock.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: do not do any work in napi poll after calling napi_complete_done()

Fixes a race condition where multiple tx cleanup or sta poll tasks could run
in parallel.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: do not do any work in napi poll after calling napi_complete_done()

Fixes a race condition where multiple tx cleanup tasks could run in parallel

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: clean up and fix interrupt masking in the irq handler

Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.
Disable interrupts in one call before scheduling

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: only clear unmasked interrupts in irq tasklet

If an interrupt is temporarily masked, its pending events need to be processed
later, even if another interrupt happened in the mean time.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: clean up and fix interrupt masking in the irq handler

Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: set interrupt mask register to 0 before requesting irq

Avoids spurious interrupts in case the hardware was running already

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix double DMA unmap of the first buffer on 7615/7915

A small part of the first skb buffer is passed to the firmware for parsing
via DMA, while the full buffer is passed as part of the TXP.

Avoid calling DMA unmap on the first part (with a different length than map)

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix crash on tx rate report for invalid stations

Check wcid RCU pointer before using it

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: enable U-APSD on AP side

Enable U-APSD support for AP interface.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: get rid of unused variable

Remove unused state variable in mt76_sdio structure

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: move tx/rx processing in 2 separate works

In order to maximize parallelism, split status work in tx status work
and rx net work

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: move status processing in txrx wq

As it has been done for tx and rx processing, move tx/rx status
processing into mt76s_txrx_wq workqueue

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: move rx processing in txrx wq

Move rx processing to mt76s_txrx_wq in order to minimize the interval when
the sdio bus is locked during rx

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: move tx processing in a dedicated wq

Introduce mt76s_txrx_wq workqueue and move tx processing from kthread to
a dedicated work. This is preliminary patch to improve mt7663s throughput

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: fix oom in mt76s_tx_queue_skb_raw

Free the mcu skb in case of error in mt76s_tx_queue_skb_raw routine

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: reschedule runtime-pm receiving a tx interrupt

Reschedule runtime-pm after receiving a tx interrupt.
Update runtime-pm last activity before injecting packets

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: do not inject packets if MT76_STATE_PM is set

Do not tx packets in mt76_txq_send_burst() or mt76_txq_schedule_list()
if the device is in runtime-pm

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_update

wq queue is always updated holding mt76 spinlock. Grab mt76 lock in
mt7615_queue_key_update() before putting a new element at the end of the
queue.

Fixes: eb99cc95c3b65 ("mt76: mt7615: introduce mt7663u support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_ops

Initialize set_drv_ctrl and set_fw_ctrl function pointers in
mt7663s_mcu_init. This is a preliminary patch to enable runtime-pm for
mt7663s chipset.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops

Introduce set_drv_ctrl and set_fw_ctrl function pointers in
mt7615_mcu_ops data structure. This is a preliminary patch to enable
runtime-pm for non-pci chipsets

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: register ext_phy if DBDC is detected

MT_EE_WIFI_CONF field can be used to detect if the chipset is MT7615D.
Thus, add support to automatically register ext_phy if DBDC is detected.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

zd1201: simplify the return expression of zd1201_set_maxassoc()

Simplify the return expression.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200921131115.93504-1-miaoqinglang@huawei.com

rtw88: Fix potential probe error handling race with wow firmware loading

If rtw_core_init() fails to load the wow firmware, rtw_core_deinit()
will not get called to clean up the regular firmware.

Ensure that an error loading the wow firmware does not produce an oops
for the regular firmware by waiting on its completion to be signalled
before returning. Also release the loaded firmware.

Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Chin-Yen Lee <timlee@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200920132621.26468-3-afaerber@suse.de

rtw88: Fix probe error handling race with firmware loading

In case of rtw8822be, a probe failure after successful rtw_core_init()
has been observed to occasionally lead to an oops from rtw_load_firmware_cb():

[    3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000
[    3.930531] pci 0001:01:00.0: reg 0x10: [io  0x0000-0x00ff]
[    3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[    3.944042] pci 0001:01:00.0: supports D1 D2
[    3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit]
[    3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit]
[    3.972332] pci 0001:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
[    3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001)
[    3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory
[    3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region
[    4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources
[    4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12
[    4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c
[    4.058975] Mem abort info:
[    4.058980]   ESR = 0x96000004
[    4.058990]   EC = 0x25: DABT (current EL), IL = 32 bits
[    4.070353]   SET = 0, FnV = 0
[    4.073487]   EA = 0, S1PTW = 0
[    4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console
[    4.076723] Data abort info:
[    4.086415]   ISV = 0, ISS = 0x00000004
[    4.087731] Freeing unused kernel memory: 1792K
[    4.090391]   CM = 0, WnR = 0
[    4.098091] [edafeaac9607952c] address between user and kernel address ranges
[    4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    4.111129] Modules linked in:
[    4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700
[    4.122386] Hardware name: Realtek Saola EVB (DT)
[    4.127223] Workqueue: events request_firmware_work_func
[    4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[    4.138393] pc : rtw_load_firmware_cb+0x54/0xbc
[    4.143040] lr : request_firmware_work_func+0x44/0xb4
[    4.148217] sp : ffff800010133d70
[    4.151616] x29: ffff800010133d70 x28: 0000000000000000
[    4.157069] x27: 0000000000000000 x26: 0000000000000000
[    4.162520] x25: 0000000000000000 x24: 0000000000000000
[    4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100
[    4.173424] x21: ffff00007ad35880 x20: edafeaac96079504
[    4.178877] x19: ffff00007ad35870 x18: 0000000000000000
[    4.184328] x17: 00000000000044d8 x16: 0000000000004310
[    4.189780] x15: 0000000000000800 x14: 00000000ef006305
[    4.195231] x13: ffffffff00000000 x12: ffffffffffffffff
[    4.200682] x11: 0000000000000020 x10: 0000000000000003
[    4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680
[    4.211585] x7 : 0000000000000000 x6 : ffff80001119b588
[    4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80
[    4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718
[    4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600
[    4.233391] Call trace:
[    4.235906]  rtw_load_firmware_cb+0x54/0xbc
[    4.240198]  request_firmware_work_func+0x44/0xb4
[    4.245027]  process_one_work+0x178/0x1e4
[    4.249142]  worker_thread+0x1d0/0x268
[    4.252989]  kthread+0xe8/0xf8
[    4.256127]  ret_from_fork+0x10/0x18
[    4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681)
[    4.266049] ---[ end trace f822ebae1a8545c2 ]---

To avoid this, wait on the completion callbacks in rtw_core_deinit()
before releasing firmware and continuing teardown.

Note that rtw_wait_firmware_completion() was introduced with
c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware
if wowlan is supported"), so backports to earlier branches may need to
inline wait_for_completion(&rtwdev->fw.completion) instead.

Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200920132621.26468-2-afaerber@suse.de

brcmfmac: check return value of driver_for_each_device()

Fixes the following W=1 kernel build warning(s):

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]
  1576 |  int ret;
       |      ^~~

driver_for_each_device() has been declared with __must_check, so the
return value should be checked.

Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1600481191-14250-1-git-send-email-zhangchangzhong@huawei.com

rtlwifi: rtl8723be: use true,false for bool variable large_cfo_hit

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1155:27-47: WARNING:
Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1156:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1159:3-23: WARNING:
Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074437.3459305-1-yanaijie@huawei.com

rtlwifi: rtl8821ae: use true,false for bool variable large_cfo_hit

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2680:27-47: WARNING:
Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2683:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2686:3-23: WARNING:
Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074428.3459234-1-yanaijie@huawei.com

rtlwifi: rtl8192ee: use true,false for bool variable large_cfo_hit

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:721:27-47:
WARNING: Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:722:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:725:2-22: WARNING:
Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074412.3459163-1-yanaijie@huawei.com

rtlwifi: Use ffs in <foo>_phy_calculate_bit_shift

Remove the loop and use the generic ffs instead.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/e2ab424d24b74901bc0c39f0c60f75e871adf2ba.camel@perches.com

mt7601u: Convert to DEFINE_SHOW_ATTRIBUTE

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919024838.14172-1-miaoqinglang@huawei.com

wlcore: Remove unused function no_write_handler()

There is no caller in tree, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918131305.20976-1-yuehaibing@huawei.com

rtlwifi: rtl8723be: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c:861:6-35: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-10-zhengbin13@huawei.com

rtlwifi: rtl8192de: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:566:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:572:13-19: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:581:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:587:13-19: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-9-zhengbin13@huawei.com

rtlwifi: rtl8192ce: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:616:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:621:13-19: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:626:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:631:13-19: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-8-zhengbin13@huawei.com

rtlwifi: rtl8192cu: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:831:14-49: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-7-zhengbin13@huawei.com

rtlwifi: rtl8821ae: fix comparison to bool warning in phy.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1816:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1825:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1839:5-13: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-6-zhengbin13@huawei.com

rtlwifi: rtl8821ae: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:1897:5-13: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-5-zhengbin13@huawei.com

rtlwifi: rtl8192cu: fix comparison to bool warning in mac.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:161:14-17: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:168:13-16: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:179:14-17: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:186:13-16: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-4-zhengbin13@huawei.com

rtlwifi: rtl8192c: fix comparison to bool warning in phy_common.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1106:14-18: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-3-zhengbin13@huawei.com

rtlwifi: rtl8192ee: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c:797:6-33: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-2-zhengbin13@huawei.com

net: wilc1000: clean up resource in error path of init mon interface

The wilc_wfi_init_mon_int() forgets to clean up resource when
register_netdevice() failed. Add the missed call to fix it.
And the return value of netdev_priv can't be NULL, so remove
the unnecessary error handling.

Fixes: 588713006ea4 ("staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200917123019.206382-1-huangguobin4@huawei.com

ssb: Remove meaningless jump label to simplify the code

The out jump label has nothing to do. So remove it to simplify the code.

Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200915020330.96067-1-jingxiangfeng@huawei.com

rtlwifi: rtl8723ae: fix comparison pointer to bool warning in phy.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:191:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:205:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:211:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:625:5-30: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910141642.127006-4-zhengbin13@huawei.com

rtlwifi: rtl8723ae: fix comparison pointer to bool warning in trx.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/trx.c:592:5-9: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/trx.c:633:5-9: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910141642.127006-3-zhengbin13@huawei.com

rtlwifi: rtl8723ae: fix comparison pointer to bool warning in rf.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c:52:5-22: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c:482:6-14: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910141642.127006-2-zhengbin13@huawei.com

rtlwifi: rtl8188ee: fix comparison pointer to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:777:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:782:13-19: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:787:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:792:13-19: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:871:6-33: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:1070:5-13: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910135917.143723-4-zhengbin13@huawei.com

rtlwifi: rtl8188ee: fix comparison pointer to bool warning in trx.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:735:5-9: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:776:5-9: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910135917.143723-3-zhengbin13@huawei.com

rtlwifi: rtl8188ee: fix comparison pointer to bool warning in phy.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1584:14-18: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910135917.143723-2-zhengbin13@huawei.com

qtnfmac: Remove unused macro QTNF_DMP_MAX_LEN

There is no caller in tree, so remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200909135951.4028-1-yuehaibing@huawei.com

rtw88: rtw8822c: eliminate code duplication, use native swap() function

swap_u32() duplicate native swap(), so replace swap_u32() with swap().

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200913165958.419744-1-insafonov@gmail.com

wlcore: Remove unused macro WL1271_SUSPEND_SLEEP

commit 45aa7f071b06 ("wlcore: Use generic runtime pm calls for wowlan elp configuration")
left behind this, remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200909135905.35728-1-yuehaibing@huawei.com

brcmsmac: main: Eliminate empty brcms_c_down_del_timer()

This function does nothing so remove it. This addresses the following
coccicheck warning:

drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:5103:6-15:
Unneeded variable: "callbacks". Return "0" on line 5105

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910140446.1168049-1-yanaijie@huawei.com
Link: https://lore.kernel.org/r/20200910140455.1168174-1-yanaijie@huawei.com

brcmsmac: phy_lcn: Remove unused variable 'lcnphy_rx_iqcomp_table_rev0'

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:361:25: warning: unused variable 'lcnphy_rx_iqcomp_table_rev0' [-Wunused-const-variable]
 struct lcnphy_rx_iqcomp lcnphy_rx_iqcomp_table_rev0[] = {
                         ^
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-30-lee.jones@linaro.org
Link: https://lore.kernel.org/r/20200910140505.1168317-1-yanaijie@huawei.com
Link: https://lore.kernel.org/r/20200910035600.21736-1-yuehaibing@huawei.com

brcmsmac: phytbl_lcn: Remove unused array 'dot11lcn_gain_tbl_rev1'

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phytbl_lcn.c:108:18: warning: unused variable 'dot11lcn_gain_tbl_rev1' [-Wunused-const-variable]
 static const u32 dot11lcn_gain_tbl_rev1[] = {

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-29-lee.jones@linaro.org

airo: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'mpi_map_card()' GFP_KERNEL can be used because
this function is called from a probe or a module_init() function and no
spinlock is taken in the between.

The call chains are:
  airo_init_module module_init function in 'airo.c'
or
  airo_probe .probe function in 'airo_cs.c'
    --> airo_config

followed in both cases by:
      --> init_airo_card
        --> _init_airo_card
          --> mpi_map_card

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200907201942.321568-1-christophe.jaillet@wanadoo.fr

brcmfmac: support SAE authentication offload in AP mode

Firmware may have SAE authenticator code built-in. This is detected by
the driver and indicated in the wiphy features flags. User space can use
this flag to determine whether or not to provide the password material
in the nl80211 start AP command to offload the SAE authentication in AP
mode.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200817073316.33402-5-stanley.hsu@cypress.com

brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK in AP mode

Firmware may have authenticator code built-in. This is detected by the
driver and indicated in the wiphy features flags. User space can use
this flag to determine whether or not to provide the pre-shared key
material in the nl80211 start AP command to offload the 4-way handshake
in AP mode.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200817073316.33402-3-stanley.hsu@cypress.com

net: hns: use IRQ_NOAUTOEN to avoid irq is enabled due to request_irq

Rather than doing request_irq and then disabling the irq immediately, it
should be safer to use IRQ_NOAUTOEN flag for the irq. It removes any gap
between request_irq() and disable_irq().

Cc: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-ethernet-ti-ale-add-static-configuration'

Grygorii Strashko says:

====================
net: ethernet: ti: ale: add static configuration

As existing, as newly introduced CPSW ALE versions have differences in
supported features and ALE table formats. Especially it's actual for the
recent AM65x/J721E/J7200 and future AM64x SoCs, which supports more
features like: auto-aging, classifiers, Link aggregation, additional HW
filtering, etc.

The existing ALE configuration interface is not practical in terms of
adding new features and requires consumers to program a lot static
parameters. And any attempt to add new features will case endless adding
and maintaining different combination of flags and options. Because CPSW
ALE configuration is static and fixed for SoC (or set of SoC), It is
reasonable to add support for static ALE configurations inside ALE module.

This series introduces static ALE configuration table for different ALE
variants and provides option for consumers to select required ALE
configuration by providing ALE const char *dev_id identifier (Patch 2).
And all existing driver have been switched to use new approach (Patches 3-6).

After this ALE HW auto-ageing feature can be enabled for AM65x CPSW ALE
variant (Patch 7).

Finally, Patches 8-9 introduces tables to describe the ALE VLAN entries
fields as the ALE VLAN entries are too much differ between different TI
CPSW ALE versions. So, handling them using flags, defines and get/set
functions are became over-complicated.

Patch 1 - is preparation patch

Changes in v3:
- fixed comment for Patch 2

Changes in v2:
- fixed sparse warnings

v2: https://lore.kernel.org/patchwork/cover/1301684/
v1: https://lore.kernel.org/patchwork/cover/1301048/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: ale: add support for multi port k3 cpsw versions

The TI J721E (CPSW9g) ALE version is similar, in general, to Sitara AM3/4/5
CPSW ALE, but has more extended functions and different ALE VLAN entry
format.

This patch adds support for for multi port TI J721E (CPSW9g) ALE variant.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: ale: switch to use tables for vlan entry description

The ALE VLAN entries are too much differ between different TI CPSW ALE
versions. So, handling them using flags, defines and get/set functions
became over-complicated.

This patch introduces tables to describe the ALE VLAN entries fields, which
are different between TI CPSW ALE versions, and new get/set access
functions. It also allows to detect incorrect access to not available ALL
entry fields.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: am65-cpsw: enable hw auto ageing

The AM65x ALE supports HW auto-ageing which can be enabled by programming
ageing interval in ALE_AGING_TIMER register. For this CPSW fck_clk
frequency has to be know by ALE.

This patch extends cpsw_ale_params with bus_freq field and enables ALE HW
auto ageing for AM65x CPSW2G ALE version.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: ale: make usage of ale dev_id mandatory

Hence all existing driver updated to use ALE dev_id the usage of ale dev_id
can be made mandatory and cpsw_ale_create() can be updated to use
"features" property from ALE static configuration.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: am65-cpsw: use dev_id for ale configuration

The previous patch has introduced possibility to select CPSW ALE by using
ALE dev_id identifier. Switch TI TI AM65x/J721E CPSW NUSS driver to use
dev_id.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: netcp: ethss: use dev_id for ale configuration

The previous patch has introduced possibility to select CPSW ALE by using
ALE dev_id identifier. Switch TI Keystone 2 NETCP driver to use dev_id and
perform clean up by removing "ale_entries" configuration code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw: use dev_id for ale configuration

The previous patch has introduced possibility to select CPSW ALE by using
ALE dev_id identifier. Switch TI cpsw driver to use dev_id="cpsw" and
perform clean up by removing "ale_entries" configuration code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: ale: add static configuration

As existing, as newly introduced CPSW ALE versions have differences in
supported features and ALE table formats. Especially it's actual for the
recent AM65x/J721E/J7200 SoC and feature AM64x, which supports features
like: auto-aging, classifiers, Link aggregation, additional hw filtering,
etc.

Existing ALE configuration interface is not practical in terms of adding
new features and requires consumers to program a lot static parameters. Any
attempt to add new options will case endless adding and maintaining
different combination of flags and options.

Hence CPSW ALE configuration is static and fixed for SoC (or set of SoC) It
is reasonable to add support for static ALE configurations inside ALE
module. This patch adds static ALE configuration table for different ALE
versions and provides option for consumers to select required ALE
configuration by providing ALE const char *dev_id identifier.

This feature is not enabled by default until existing CPSW drivers will be
modified by follow up patches.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: ale: add cpsw_ale_get_num_entries api

Add cpsw_ale_get_num_entries() API to return number of ALE table entries
and update existing drivers to use it.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'DSA-tag_8021q-cleanup'

Vladimir Oltean says:

====================
DSA tag_8021q cleanup

This small series tries to consolidate the VLAN handling in DSA a little
bit. It reworks tag_8021q to be minimally invasive to the dsa_switch_ops
structure. This makes the rest of the code a bit easier to follow.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: dsa: Add more convenient functions for installing port VLANs"

This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f.

Citing that commit message, the call graph was:

    dsa_slave_vlan_rx_add_vid   dsa_port_setup_8021q_tagging
                |                        |
                |                        |
                |          +-------------+
                |          |
                v          v
               dsa_port_vid_add      dsa_slave_port_obj_add
                      |                         |
                      +-------+         +-------+
                              |         |
                              v         v
                           dsa_port_vlan_add

Now that tag_8021q has its own ops structure, it no longer relies on
dsa_port_vid_add, and therefore on the dsa_switch_ops to install its
VLANs.

So dsa_port_vid_add now only has one single caller. So we can simplify
the call graph to what it was before, aka:

        dsa_slave_vlan_rx_add_vid     dsa_slave_port_obj_add
                      |                         |
                      +-------+         +-------+
                              |         |
                              v         v
                           dsa_port_vlan_add

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_8021q: add a context structure

While working on another tag_8021q driver implementation, some things
became apparent:

- It is not mandatory for a DSA driver to offload the tag_8021q VLANs by
  using the VLAN table per se. For example, it can add custom TCAM rules
  that simply encapsulate RX traffic, and redirect & decapsulate rules
  for TX traffic. For such a driver, it makes no sense to receive the
  tag_8021q configuration through the same callback as it receives the
  VLAN configuration from the bridge and the 8021q modules.

- Currently, sja1105 (the only tag_8021q user) sets a
  priv->expect_dsa_8021q variable to distinguish between the bridge
  calling, and tag_8021q calling. That can be improved, to say the
  least.

- The crosschip bridging operations are, in fact, stateful already. The
  list of crosschip_links must be kept by the caller and passed to the
  relevant tag_8021q functions.

So it would be nice if the tag_8021q configuration was more
self-contained. This patch attempts to do that.

Create a struct dsa_8021q_context which encapsulates a struct
dsa_switch, and has 2 function pointers for adding and deleting a VLAN.
These will replace the previous channel to the driver, which was through
the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops.

Also put the list of crosschip_links into this dsa_8021q_context.
Drivers that don't support cross-chip bridging can simply omit to
initialize this list, as long as they dont call any cross-chip function.

The sja1105_vlan_add and sja1105_vlan_del functions are refactored into
a smaller sja1105_vlan_add_one, which now has 2 entry points:
- sja1105_vlan_add, from struct dsa_switch_ops
- sja1105_dsa_8021q_vlan_add, from the tag_8021q ops
But even this change is fairly trivial. It just reflects the fact that
for sja1105, the VLANs from these 2 channels end up in the same hardware
table. However that is not necessarily true in the general sense (and
that's the reason for making this change).

The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The
dsa_8021q_context structure needs to be propagated because adding a VLAN
is now done through the ops function pointers inside of it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_8021q: setup tagging via a single function call

There is no point in calling dsa_port_setup_8021q_tagging for each
individual port. Additionally, it will become more difficult to do that
when we'll have a context structure to tag_8021q (next patch). So
refactor this now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_8021q: include missing refcount.h

The previous assumption was that the caller would already have this
header file included.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

crypto/chcr: move nic TLS functionality to drivers/net

This patch moves complete nic tls offload (kTLS) code from crypto
directory to drivers/net/ethernet/chelsio/inline_crypto/ch_ktls
directory. nic TLS is made a separate ULD of cxgb4.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sfc-encap-offloads-on-EF10'

Edward Cree says:

====================
sfc: encap offloads on EF10

EF10 NICs from the 8000 series onwards support TX offloads (checksumming,
 TSO) on VXLAN- and NVGRE-encapsulated packets.  This series adds driver
 support for these offloads.

Changes from v1:
 * Fix 'no TXQ of type' error handling in patch #1 (and clear up the
   misleading comment that inspired the wrong version)
 * Add comment in patch #5 explaining what the deal with TSOv3 is
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: advertise encapsulated offloads on EF10

Necessitates an .ndo_features_check, as the EF10 datapath has several
 limitations on what it can handle.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: implement encapsulated TSO on EF10

>From the 8000 series onwards, EF10 NICs with suitable firmware are able
 to perform TSO within VXLAN or NVGRE encapsulation.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: de-indirect TSO handling

Remove the tx_queue->handle_tso function pointer, and just use
 tx_queue->tso_version to decide which function to call, thus removing
 an indirect call from the fast path.
Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired
 tx_queue->tso_version before calling it.
In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by
 setting tx_queue->tso_version to 0, which will cause the TX path to
 use the GSO-based fallback.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: select inner-csum-offload TX queues for skbs that need it

Won't actually be exercised until we start advertising the corresponding
 offload features.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: create inner-csum queues on EF10 if supported

If the MC reports the VXLAN_NVGRE datapath capability, then these queues
 can be used for checksum offload of encapsulated packets.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: define inner/outer csum offload TXQ types

Nothing yet creates inner csum TXQs; just change all references to
 EFX_TXQ_TYPE_OFFLOAD to the new EFX_TXQ_TYPE_OUTER_CSUM.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: decouple TXQ type from label

Make it possible to have an arbitrary mapping from types to labels,
 because when we add inner-csum-offload TXQs there will no longer be a
 convenient nesting hierarchy of NIC types (EF10 will have inner-csum
 TXQs, while Siena will have HIGHPRI).
Correct a misleading comment on efx_hard_start_xmit().

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Constify npc_kpu_profile_{action,cam}

These are never modified, so constify them to allow the compiler to
place them in read-only memory. This moves about 25kB to read-only
memory as seen by the output of the size command.

Before:
   text    data     bss     dec     hex filename
 296203   65464    1248  362915   589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko

After:
   text    data     bss     dec     hex filename
 321003   40664    1248  362915   589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sfc-misc-cleanups'

Edward Cree says:

====================
sfc: misc cleanups

Clean up a few nits I noticed while working on TXQ stuff.
====================

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: cleanups around efx_alloc_channel

The old_channel argument is never used, so remove it.
The function is only called from elsewhere in efx_channels.c, so make
 it static and remove the declaration from the header file.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: remove spurious unreachable return statement

The statement above it already returns, so there is no way to get here.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: remove duplicate call to efx_init_channels from EF100 probe

efx_init_struct already calls this, we don't need to do it again.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: mcast: Fix incomplete MDB dump

Each MDB entry is encoded in a nested netlink attribute called
'MDBA_MDB_ENTRY'. In turn, this attribute contains another nested
attributed called 'MDBA_MDB_ENTRY_INFO', which encodes a single port
group entry within the MDB entry.

The cited commit added the ability to restart a dump from a specific
port group entry. However, on failure to add a port group entry to the
dump the entire MDB entry (stored in 'nest2') is removed, resulting in
missing port group entries.

Fix this by finalizing the MDB entry with the partial list of already
encoded port group entries.

Fixes: 5205e919c9f0 ("net: bridge: mcast: add support for src list and filter mode dumping")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: remove redundant assignment to variable err

The variable err is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is redundant
and can be removed.  Also re-order variable declarations in reverse
Christmas tree ordering.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ag71xx-add-ethtool-and-flow-control-support'

Oleksij Rempel says:

====================
ag71xx: add ethtool and flow control support

The main target of this patches is to provide flow control support
for ag71xx driver. To be able to validate this functionality, I also
added ethtool support with HW counters. So, this patches was validated
with iperf3 and counters showing Pause frames send or received by this
NIC.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ag71xx: add flow control support

Add flow control support. The functionality was tested on AR9331 SoC and
confirmed by iperf3 results and HW counters exported over ethtool.
Following test configurations was used:

iMX6S receiver <--- TL-SG1005D switch <---- AR9331 sender

The switch is supporting symmytric flow control:
Settings for eth0:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
--->>   Link partner advertised pause frame use: Symmetric
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Auto-negotiation: on
        Port: MII
        PHYAD: 4
        Transceiver: external
        Link detected: yes

The iMX6S system was configured to 10Mbit, to let the switch use flow
control:
  - ethtool -s eth0 speed 10

With flow control disabled on AR9331:
  - ethtool -A eth0  rx off tx off
  - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10

[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.00  sec  66.2 MBytes  55.5 Mbits/sec  0.000 ms  0/47155 (0%)  sender
[  5]   0.00-10.04  sec  11.5 MBytes  9.57 Mbits/sec  1.309 ms  38986/47146 (83%)  receiver

With flow control enabled on AR9331:
  - ethtool -A eth0  rx on tx on
  - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10

[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.00  sec  15.1 MBytes  12.6 Mbits/sec  0.000 ms  0/10727 (0%)  sender
[  5]   0.00-10.05  sec  11.5 MBytes  9.57 Mbits/sec  1.371 ms  2525/10689 (24%)  receiver

Similar results are get in opposite direction by introducing extra CPU
load on AR9331:
  - chrt 40 dd if=/dev/zero of=/dev/null &

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ag71xx: add ethtool support

Add basic ethtool support. The functionality was tested on AR9331 SoC.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wan/x25_asy: Remove an unused flag "SLF_OUTWAIT"

The "SLF_OUTWAIT" flag defined in x25_asy.h is not actually used.
It is only cleared at one place in x25_asy.c but is never read or set.
So we can remove it.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: set get_rx_header_len() as void for it didn't have any error code to return

We found the following warning when using W=1 to build kernel:

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int ret, coe = priv->hw->rx_csum;

When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
dwxgmac2_get_rx_header_len() return 0 only, without any error code to
report. Therefore, it's better to define get_rx_header_len() as void.

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'Add-GVE-Features'

David Awogbemila says:

====================
Add GVE Features.

Note: Patch 4 in v3 was dropped.

Patch 4 (patch 5 in v3): Start/stop timer only when report stats is
enabled/disabled.
Patch 7 (patch 8 in v3): Use netdev_info, not dev_info, to log
device link status.
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Enable Link Speed Reporting in the driver.

This change allows the driver to report the device link speed
when the ethtool command:
ethtool <nic name>
is run.
Getting the link speed is done via a new admin queue command:
ReportLinkSpeed.

Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Use link status register to report link status

This makes the driver better aware of the connectivity status of the
device. Based on the device's status register, the driver can call
netif_carrier_{on,off}.

Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: Patricio Noyola <patricion@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Batch AQ commands for creating and destroying queues.

Adds support for batching AQ commands and uses it for creating and
destroying queues.

Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>