Revert "s5pc110: wmg160: Workaround comments because of wrong board detection"

This reverts commit 643344ab72cadd769be981653672cc1e21fd5e61.

s5pc110: Fix keypad codes

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: wmg160: Workaround comments because of wrong board detection

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx

s5pc110: aquila: Workaround for key usb download

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

usbd: check mmc is supported

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: wmg160: USB support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx

s5pc110: wmg160: Board detection with GPH3[0:4]

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: No MMC support

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: wmg160: Fixme board detection

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: Fix wrong machine detection

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: No MMC & LCD support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: GPIO I2C support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: Display EVT0 when CPU is EVT0

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: initial support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: Add machine ID

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Revert "s5pc110: aries: GPIO PDA_ACTIVE is not "OUTPUT-HIGH""

This reverts commit 0d7a106f48488a48180441086648536f12fc4117.

PDA_ACTIVE OUTPUT-HIGH is for "IDLE" not for "SLEEP"

Wait until H/W confirms about this and use the old values.

s5pc110: aquila: set KEEP_STATE at FM_RST gpio

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aquila: Set CODEC_LDO_EN gpio to KEEP_STATE

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aries: GPIO PDA_ACTIVE is not "OUTPUT-HIGH"

H/W requested this setting. Modem should follow this change in
order to prevent sleep current leakage.

s5pc110: lcd: code clean

s5pc110: lcd: code clean

s5pc110: aries: Add LDO_CODEC_EN comments

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aries: Set LDO_CODEC_EN gpio to KEEP_STATE

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aries: copied BCM4329 comments from aquila

s5pc110: aquila: Add BCM4329 comments for sleep current

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: lcd: code clean

s5pc110: aries: set KEEP_STATE at Wlan_bt_en & Wlan_nRST
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

s5pc110: UART_SEL is OUTPUT_LOW at powerdown (UART=CP)

s5pc110: neptune: clean spi platform data

s5pc110: neptune: Add fuel gauge

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Fix wrong assigned for CSA migration

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc111: neptune: add s6d16a0x lcd driver

s5pc111: neptune: Neptune with HVGA LCD support

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>

BUILD: Add dh.lee build script

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>

usbd: skip the CSA Clear temporary (for CSA Migration)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

usbd: fix num of mmc parts

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: universal: increase the modem partition

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: Add CSA migration messages

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: universal: add mtd3 to bootargs

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: universal: add csa migration code (temporary)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx

usbd: fix kernel partition sync

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: aries: do not set "KEEP_STATE" for WLAN_BT_EN, WLAN_nRST

- Revert those setup for Aries.
- Sleep current test: Aries
- BT/WLAN test: Aquila

Revert "OneNAND: Don't write if it exceeds the partition"

This reverts commit 2ce10476e35556875d8227c0cf753b7b1726ea4b.

Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx

OneNAND: Don't write if it exceeds the partition

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: universal: partition update (temporary)

 name size offset mask_flags
 0: bootloader          0x00040000 0x00000000 0
 1: params              0x00040000 0x00040000 0
 2: config              0x00380000 0x00080000 0
 3: csa_new             0x00800000 0x00400000 0
 4: kernel              0x00600000 0x00c00000 0
 5: log                 0x00100000 0x01200000 0
 6: modem               0x00980000 0x01300000 0
 7: csa                 0x00800000 0x01c80000 0
 8: UBI                 0x1db80000 0x02480000 0

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

usbd: add support mmc partition write

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: wlan_bt: Keep state of GPB(3) for BT_nRST gpio when resume/suspend

s5pc110: aquila/aries GPIO setting update

- SET HIGH -> KEEP_STATE for UART_SEL (CP might be using UART
  just before an instance of sleep.)

- KEEP_STATE setting of WLAN/BT in Aquila is copied to Aries.
- KEEP_STATE setting of UART_SEL in Aries is copied to Aquila.

s5pc110: aries: set UART_SEL High for sleep.

Sleep current: stabilized at 1.22mA
No more JIG malfunction during sleep.

s5pc110: aqulia: use Keep_STATE about wlan_bt_en, wlan_nRst
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

s5pc110: aries: GPIO powerdown mode setting update done.

Aries sleep current: 1.22~1.24mA @ 4.2V

Based on the LSI suggestion on Aries. Some of the suggestions
are dropped because they increase the power consumption.

s5pc110: aries: GPIO powerdown mode setting updated: 1.38->1.24mA

- Mainly, PHONE_ON (O-L -> O-H) reduces the sleep current.
- For "Not Connected (NC)", O-L -> I(PD) reduces the sleep
  current extremely slightly... (need tens of them to see
  any difference)

s5pc110: geminus: support GPIO powerdown modes.

- Setting is same as Aquila/Aries for now. Needs to be updated
  seperatedly later.
- With this setting, Geminus rev1 has 80 ~ 200 mA of sleep
  current.

s5pc110: not aries: mirror setting incurs 2mA of sleep current in rev 0.8

s5pc110: CP_RST Low->High should not be done too early before boot cmd.

- Sometimes, it takes more than 15 sec, which often allow CP
to turn off before sending a boot cmd.
- However, because there should be some delay between CP_RST Hi
and boot cmd, we need to modify kernel as well.

s5pc110: geminus: support fsa9480 / max17040 for rev1 geminus.

- U-boot charging is enabled for u-boot.

s5pc110: aquila: CP_RST (GPH3_7) On at u-boot like Aries does.

s5pc110: do mirror setting for HWREV_MODE* gpio pins

- Mirror setting: if the pin is attached to "High", set it as
  pull-up for sleep and pull-down for "Low" pins.
- This is supposed to lower around 0.06mA of sleep current.

- In Aries, the sleep current became 1.39mA --> 1.34mA @ 4.22V
(Yes, it's under 1.5mA!!)

Revert "s5pc110: aquila: Add clock gate defines"

This reverts commit 2cdb146ea3262317f6f01e638f4c2dfe60cbebab.

s5pc110: aquila: Add clock gate defines

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Add MCP memory name and correct configuration

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: FB: Add USE_LCD_TEST for test

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Fix D type memory config

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110:P1:modified for AMOLED init

s5pc110:P1:edit for only P1

s5pc110: fix cpu revision check for geminus

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: geminus: Add autodownload mode

s5pc110: aries: CP RST High at u-boot per the request.

s5pc110: gpio setting: add "Keep State", ready to support "mirror" mode.

- Mirror mode: set Pull-Down/Up according to the current
state in u-boot booting time. (For hw-revision pins)

- Keep State: 0x3 "Previous state" for GPxxCONPDN

s5pc110: aries: updated gpio map, reduced sleep current

Updated gpio powerdown setting based on a bare guess #2
- w/o platform: 3.62mA
- w/ platform: 18mA

s5pc110: aries: gpio setting updated

- Based on a simple guess, powerdown gpio settings are updated

- W/o platform: 4.6 mA
- W/ platform: 21 mA

s5pc110: aquila: Make a simple codes

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Merge branch 'master' of mj.ham@party:/pub/git/u-boot-s5pc1xx

s5pc110: Aries: let it enter gpio powerdown mode setting.

s5pc110: aries: enable movinand power

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: seperate gpio setting from universal.c. seperate aries gpio

- board/samsung/universal/gpio_setting.h has the powerdown mode
  settings of gpio's.
- Settings for Aries are seperated from those for Aquila.

s5pc110: geminus: Fix revision check

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

fsa9480: save usb path

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: cypress: Fix cypress detection

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: universal: remove compile warnings

i2c-gpio.c: In function 'i2c_gpio_get':
i2c-gpio.c:87: warning: 'return' with no value, in function returning non-void
universal.c: In function 'i2c_init_board':
universal.c:264: warning: assignment makes integer from pointer without a cast
universal.c:265: warning: assignment makes integer from pointer without a cast
universal.c:272: warning: assignment makes integer from pointer without a cast

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: aquila: Add MACH_P1P2

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aquila: Remove P1P2 codes

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: OneNAND: Prefetch read enable

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: do not read CODEC_XTAL_EN to configure DRAM.

charger: removed unused array for animation.

Revert "s5pc110: mmc: active high wlan_bt_en during suspend/resume"

This reverts commit 7bf25f996c2db50b6f90748d9b80617f9c7c21ce.

s5pc110: mmc: active high wlan_bt_en during suspend/resume
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

s5pc110: lcd: Correct ACL ON command

s5pc110: lcd: add s6e63m0 ELVSS on sequence

s5pc110: universal: adjust gpio-i2c busses

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: gpio-i2c: check gpio bank is NULL

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: aquila: Rev 0.9 LCD support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aries: add i2c gpio busses

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx

s5pc110: universal: move CMD_BMP config

It's up to LCD Config

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: typo: strne->streq (no retention-release for resume)