KVM: PPC: remove orphan declarations from kvm_ppc.h

Remove the following orphan declarations from kvm_ppc.h:

1. kvmppc_mmu_priv_switch() has been removed since
commit dd9ebf1f9435 ("KVM: PPC: e500: Add shadow PID
support").
2. kvmppc_core_destroy_mmu() has been removed since
commit ecc0981ff07c ("KVM: ppc: cosmetic changes to mmu
hook names").
3. kvmppc_prepare_vrma() has been removed since
commit aa04b4cc5be6 ("KVM: PPC: Allocate RMAs (Real Mode
Areas) at boot for use by guests").

So remove the declarations for them from header file.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-10-cuigaosheng1@huawei.com

powerpc/ps3: remove orphan declarations from ps3av.h

Remove the following orphan declarations from ps3av.h:
1. ps3av_dev_open()
2. ps3av_dev_close()

They have been removed since commit 13a5e30cf740 ("[POWERPC] PS3:
Rework AV settings driver"), so remove them.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-9-cuigaosheng1@huawei.com

powerpc/sysdev: remove unused xics_ipi_dispatch() declaration

xics_ipi_dispatch() has been removed since
commit 23d72bfd8f9f ("powerpc: Consolidate ipi message mux
and demux"), so remove it.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-8-cuigaosheng1@huawei.com

powerpc/powernv: remove orphan declarations from opal.h

Remove the following orphan declarations from opal.h:
1. opal_notifier_register()
2. opal_notifier_unregister()
3. opal_notifier_update_evt()
4. opal_notifier_enable()
5. opal_notifier_disable()

They have been removed since commit 81f2f7ce4c5b ("opal:
Remove events notifier"), so remove them.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-7-cuigaosheng1@huawei.com

powerpc/mm: remove orphan declarations from mmu_context.h

Remove the following orphan declarations from mmu_context.h:
1. switch_cop() and drop_cop() have been removed since
commit 6ff4d3e96652 ("powerpc: Remove old unused icswx
based coprocessor support").

2. mm_iommu_cleanup() has been removed since
commit 4b6fad7097f8 ("powerpc/mm/iommu, vfio/spapr: Put
pages on VFIO container shutdown").

So remove the declarations for them from header file.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-6-cuigaosheng1@huawei.com

powerpc: remove unused udbg_init_debug_beat() declaration

udbg_init_debug_beat() has been removed since
commit bf4981a00636 ("powerpc: Remove the celleb support"),
so remove it.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-5-cuigaosheng1@huawei.com

powerpc: remove unused chrp_event_scan() declaration

chrp_event_scan() has been removed since
commit 3d541c4b7f6e ("powerpc/chrp: Use the same RTAS
daemon as pSeries"), so remove it.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-4-cuigaosheng1@huawei.com

powerpc/spufs: remove orphan declarations from spufs.h

Remove the following orphan declarations from spufs.h:
1. spufs_coredump_calls has been removed since
commit 48cad41f7ee7 ("[POWERPC] spufs: Combine
spufs_coredump_calls with spufs_calls").

2. spufs_coredump_num_notes has been removed since
commit 936d5bf1d7dc ("[POWERPC] spufs: Get rid of spufs_coredump_num_notes,
it's not needed if we NULL terminate").

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-3-cuigaosheng1@huawei.com

powerpc/xmon: remove unused ppc_parse_cpu() declaration

ppc_parse_cpu() has been removed since
commit 5b102782c7f4 ("powerpc/xmon: Enable disassembly
files (compilation changes)"), so remove it.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-2-cuigaosheng1@huawei.com

Revert "powerpc/rtas: Implement reentrant rtas call"

At the time this was submitted by Leonardo, I confirmed -- or thought
I had confirmed -- with PowerVM partition firmware development that
the following RTAS functions:

- ibm,get-xive
- ibm,int-off
- ibm,int-on
- ibm,set-xive

were safe to call on multiple CPUs simultaneously, not only with
respect to themselves as indicated by PAPR, but with arbitrary other
RTAS calls:

https://lore.kernel.org/linuxppc-dev/875zcy2v8o.fsf@linux.ibm.com/

Recent discussion with firmware development makes it clear that this
is not true, and that the code in commit b664db8e3f97 ("powerpc/rtas:
Implement reentrant rtas call") is unsafe, likely explaining several
strange bugs we've seen in internal testing involving DLPAR and
LPM. These scenarios use ibm,configure-connector, whose internal state
can be corrupted by the concurrent use of the "reentrant" functions,
leading to symptoms like endless busy statuses from RTAS.

Fixes: b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220907220111.223267-1-nathanl@linux.ibm.com

powerpc/powernv: add missing of_node_put() in opal_export_attrs()

After using 'np' returned by of_find_node_by_path(), of_node_put()
need be called to decrease the refcount.

Fixes: 11fe909d2362 ("powerpc/powernv: Add OPAL exports attributes to sysfs")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906141703.118192-1-zhengyongjun3@huawei.com

powerpc/85xx: Fix fall-through warning for Clang

Fix the following fallthrough warning:

arch/powerpc/platforms/85xx/mpc85xx_cds.c:161:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/KSPP/linux/issues/198
Link: https://lore.kernel.org/lkml/202209061224.KxORRGVg-lkp@intel.com/
Link: https://lore.kernel.org/r/Yxe8XTY5C9qJLd0Z@work

powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush

Allow PTE changes to avoid flushing the TLB when access permissions are
being relaxed, the dirty bit is being set, and the accessed bit is being
changed.

Relaxing access permissions and setting dirty and accessed bits do not
require a flush because the MMU will re-load the PTE and notice the
updates (it may also cause a spurious fault).

Clearing the accessed bit does not require a flush because of the
imprecise PTE accessed bit accounting that is already performed, as
documented in ptep_clear_flush_young().

This reduces TLB flushing for some mprotect(2) calls.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20220901110334.1618913-1-npiggin@gmail.com

powerpc/math-emu: Inhibit W=1 warnings

When building with W=1 you get:

arch/powerpc/math-emu/fre.c:6:5: error: no previous prototype for 'fre' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsqrt.c:11:1: error: no previous prototype for 'fsqrt' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsqrts.c:12:1: error: no previous prototype for 'fsqrts' [-Werror=missing-prototypes]
arch/powerpc/math-emu/frsqrtes.c:6:5: error: no previous prototype for 'frsqrtes' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsf.c:10:1: error: no previous prototype for 'mtfsf' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsfi.c:10:1: error: no previous prototype for 'mtfsfi' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fabs.c:7:1: error: no previous prototype for 'fabs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fadd.c:11:1: error: no previous prototype for 'fadd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fadds.c:12:1: error: no previous prototype for 'fadds' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fcmpo.c:11:1: error: no previous prototype for 'fcmpo' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fcmpu.c:11:1: error: no previous prototype for 'fcmpu' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fcmpu.c:14:19: error: variable 'B_c' set but not used [-Werror=unused-but-set-variable]
arch/powerpc/math-emu/fcmpu.c:13:19: error: variable 'A_c' set but not used [-Werror=unused-but-set-variable]
arch/powerpc/math-emu/fctiw.c:11:1: error: no previous prototype for 'fctiw' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fctiwz.c:11:1: error: no previous prototype for 'fctiwz' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fdiv.c:11:1: error: no previous prototype for 'fdiv' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fdivs.c:12:1: error: no previous prototype for 'fdivs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmadd.c:11:1: error: no previous prototype for 'fmadd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmadds.c:12:1: error: no previous prototype for 'fmadds' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmsub.c:11:1: error: no previous prototype for 'fmsub' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmsubs.c:12:1: error: no previous prototype for 'fmsubs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmul.c:11:1: error: no previous prototype for 'fmul' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmuls.c:12:1: error: no previous prototype for 'fmuls' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnabs.c:7:1: error: no previous prototype for 'fnabs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fneg.c:7:1: error: no previous prototype for 'fneg' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmadd.c:11:1: error: no previous prototype for 'fnmadd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmadds.c:12:1: error: no previous prototype for 'fnmadds' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmsub.c:11:1: error: no previous prototype for 'fnmsub' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmsubs.c:12:1: error: no previous prototype for 'fnmsubs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fres.c:7:1: error: no previous prototype for 'fres' [-Werror=missing-prototypes]
arch/powerpc/math-emu/frsp.c:12:1: error: no previous prototype for 'frsp' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsel.c:11:1: error: no previous prototype for 'fsel' [-Werror=missing-prototypes]
arch/powerpc/math-emu/lfs.c:12:1: error: no previous prototype for 'lfs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/frsqrte.c:7:1: error: no previous prototype for 'frsqrte' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsub.c:11:1: error: no previous prototype for 'fsub' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsubs.c:12:1: error: no previous prototype for 'fsubs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mcrfs.c:10:1: error: no previous prototype for 'mcrfs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mffs.c:10:1: error: no previous prototype for 'mffs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsb0.c:10:1: error: no previous prototype for 'mtfsb0' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsb1.c:10:1: error: no previous prototype for 'mtfsb1' [-Werror=missing-prototypes]
arch/powerpc/math-emu/stfiwx.c:7:1: error: no previous prototype for 'stfiwx' [-Werror=missing-prototypes]
arch/powerpc/math-emu/stfs.c:12:1: error: no previous prototype for 'stfs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmr.c:7:1: error: no previous prototype for 'fmr' [-Werror=missing-prototypes]
arch/powerpc/math-emu/lfd.c:10:1: error: no previous prototype for 'lfd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/stfd.c:7:1: error: no previous prototype for 'stfd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/math_efp.c:177:5: error: no previous prototype for 'do_spe_mathemu' [-Werror=missing-prototypes]
arch/powerpc/math-emu/math_efp.c:726:5: error: no previous prototype for 'speround_handler' [-Werror=missing-prototypes]
arch/powerpc/math-emu/math_efp.c:893:12: error: no previous prototype for 'spe_mathemu_init' [-Werror=missing-prototypes]

Fix the warnings in math_efp.c by adding prototypes of do_spe_mathemu()
and speround_handler() to asm/processor.h and declare spe_mathemu_init()
static.

The other warnings are benign and not worth the churn of fixing them,
expecially the 'unused-but-set-variable' which would impact the core
part of 'math-emu'.

So silence them by adding -Wno-missing-prototypes -Wno-unused-but-set-variable.

But then you get:

arch/powerpc/math-emu/fre.c:6:5: error: no previous declaration for 'fre' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsqrt.c:11:1: error: no previous declaration for 'fsqrt' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsqrts.c:12:1: error: no previous declaration for 'fsqrts' [-Werror=missing-declarations]
arch/powerpc/math-emu/frsqrtes.c:6:5: error: no previous declaration for 'frsqrtes' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsf.c:10:1: error: no previous declaration for 'mtfsf' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsfi.c:10:1: error: no previous declaration for 'mtfsfi' [-Werror=missing-declarations]
arch/powerpc/math-emu/fabs.c:7:1: error: no previous declaration for 'fabs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fadd.c:11:1: error: no previous declaration for 'fadd' [-Werror=missing-declarations]
arch/powerpc/math-emu/fadds.c:12:1: error: no previous declaration for 'fadds' [-Werror=missing-declarations]
arch/powerpc/math-emu/fcmpo.c:11:1: error: no previous declaration for 'fcmpo' [-Werror=missing-declarations]
arch/powerpc/math-emu/fcmpu.c:11:1: error: no previous declaration for 'fcmpu' [-Werror=missing-declarations]
arch/powerpc/math-emu/fctiw.c:11:1: error: no previous declaration for 'fctiw' [-Werror=missing-declarations]
arch/powerpc/math-emu/fctiwz.c:11:1: error: no previous declaration for 'fctiwz' [-Werror=missing-declarations]
arch/powerpc/math-emu/fdiv.c:11:1: error: no previous declaration for 'fdiv' [-Werror=missing-declarations]
arch/powerpc/math-emu/fdivs.c:12:1: error: no previous declaration for 'fdivs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmadd.c:11:1: error: no previous declaration for 'fmadd' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmadds.c:12:1: error: no previous declaration for 'fmadds' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmsub.c:11:1: error: no previous declaration for 'fmsub' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmsubs.c:12:1: error: no previous declaration for 'fmsubs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmul.c:11:1: error: no previous declaration for 'fmul' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmuls.c:12:1: error: no previous declaration for 'fmuls' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnabs.c:7:1: error: no previous declaration for 'fnabs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fneg.c:7:1: error: no previous declaration for 'fneg' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmadd.c:11:1: error: no previous declaration for 'fnmadd' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmadds.c:12:1: error: no previous declaration for 'fnmadds' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmsub.c:11:1: error: no previous declaration for 'fnmsub' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmsubs.c:12:1: error: no previous declaration for 'fnmsubs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fres.c:7:1: error: no previous declaration for 'fres' [-Werror=missing-declarations]
arch/powerpc/math-emu/frsp.c:12:1: error: no previous declaration for 'frsp' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsel.c:11:1: error: no previous declaration for 'fsel' [-Werror=missing-declarations]
arch/powerpc/math-emu/lfs.c:12:1: error: no previous declaration for 'lfs' [-Werror=missing-declarations]
arch/powerpc/math-emu/frsqrte.c:7:1: error: no previous declaration for 'frsqrte' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsub.c:11:1: error: no previous declaration for 'fsub' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsubs.c:12:1: error: no previous declaration for 'fsubs' [-Werror=missing-declarations]
arch/powerpc/math-emu/mcrfs.c:10:1: error: no previous declaration for 'mcrfs' [-Werror=missing-declarations]
arch/powerpc/math-emu/mffs.c:10:1: error: no previous declaration for 'mffs' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsb0.c:10:1: error: no previous declaration for 'mtfsb0' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsb1.c:10:1: error: no previous declaration for 'mtfsb1' [-Werror=missing-declarations]
arch/powerpc/math-emu/stfiwx.c:7:1: error: no previous declaration for 'stfiwx' [-Werror=missing-declarations]
arch/powerpc/math-emu/stfs.c:12:1: error: no previous declaration for 'stfs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmr.c:7:1: error: no previous declaration for 'fmr' [-Werror=missing-declarations]
arch/powerpc/math-emu/lfd.c:10:1: error: no previous declaration for 'lfd' [-Werror=missing-declarations]
arch/powerpc/math-emu/stfd.c:7:1: error: no previous declaration for 'stfd' [-Werror=missing-declarations]

So also add -Wno-missing-declarations.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/688084b40b5ac88f2905cb207d5dad947d8d34dc.1662531153.git.christophe.leroy@csgroup.eu

powerpc/pasemi: Use of_root in pas_pci_init()

Currently in pas_pci_init() a reference to the root node is leaked due
to a missing of_node_put(). Instead just use of_root directly.

Note that converting to of_find_compatible_node(NULL, ...) would
not be entirely equivalent, because that would check the compatible
property of the root node, whereas using of_root skips checking the root
node and start the search at the first child of the root.

Reported-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906010313.1296714-1-mpe@ellerman.id.au

powerpc/pasemi: Use strscpy instead of strlcpy

find_i2c_driver() contained the last usage of strlcpy() in arch/powerpc.
The return value was used to check if strlen(src) >= n, for which
strscpy() returns -E2BIG.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827063946.9073-1-ruscur@russell.cc

powerpc/xive: fix repeated words in comments

Delete the redundant word 'set'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220831004706.35280-1-yuanjilin@cdjrlc.com

powerpc/vas: fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220831004914.37055-1-yuanjilin@cdjrlc.com

powerpc/mobility: fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220831005109.38314-1-yuanjilin@cdjrlc.com

powerpc/powermac/udbg_scc: Add missing of_node_put()s in udbg_scc_init()

During the iteration of for_each_child_of_node(), we need to call
of_node_put() for the old references stored in to 'ch_def' and 'ch_a'
as their refcounters have been increased in last iteration.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716074344.540049-1-windhl@126.com

powerpc/powermac/pfunc_base: Add missing of_node_put() in macio_gpio_init_one()

Call of_node_put() for the reference 'gparent' escaped out of the
previous for_each_child_of_node() as it has increased the refcount.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716073111.539739-1-windhl@126.com

powerpc/powermac/low_i2c: Add missing of_node_put() in kw_i2c_probe()

Call of_node_put() for the reference 'parent' returned by
of_get_parent() which has increased the refcount.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716070758.539434-1-windhl@126.com

powerpc/powermac/feature: Add missing of_node_put()

In probe_one_macio(), call of_node_put() for the refernece 'node'
escaped out of the for_each_node_by_name() which has increased its
refcount. While the 'node' will finally escaped into a global reference,
we should still call of_node_put() in fail path which will stop global
reference creation.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716065412.539153-1-windhl@126.com

powerpc/pci-common: Fix refcount bug for 'phb->dn'

In pcibios_alloc_controller(), 'phb' is allocated and escaped into
global 'hose_list'. So we should call of_node_get() when a new reference
created into 'phb->dn'. And when phb is freed, we should call
of_node_put() on it.

NOTE: This function is called in the iteration of for_each_xx in
chrp_find_bridges() and pSeries_discover_phbs(). If there is no
of_node_get(), the object may be prematurely freed.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220702022936.266146-1-windhl@126.com

powerpc/powernv: Add missing of_node_put()s

In these driver init functions, there are two kinds of errors:

(1) missing of_put_node() for of_find_compatible_node()'s returned
    pointer (refcount incremented)  in fail path or when it is not
    used anymore.
(2) missing of_put_node() for 'for_each_xxx' loop's break

Signed-off-by: Liang He <windhl@126.com>
[mpe: Use out_put_xxx goto label naming]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220620132553.4073863-1-windhl@126.com

powerpc/fsl_pci: Remove of_node_put() when reference escaped out

In fsl_pci_assign_primary(), we should remove the of_node_put()
when breaking out of the for_each_matching_node() as the 'np'
is escaped out by global 'fsl_pci_primary'.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220720124557.1256243-1-windhl@126.com

powerpc/85xx: Add missing of_node_get/put() in ge_imp3a_pci_assign_primary()

for_each_node_by_type() will automatically increase and decrease
the refcount during the iteration. However, there is a reference
escaped into global 'fsl_pci_primary' and we need to handle it.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701140119.245435-1-windhl@126.com

powerpc/44x: Add of_node_put() when break out from for_each

In ppc47x_init_irq(), we need to call of_node_put() when there is
a break during the iteration of for_each_node_with_property() which
will automatically increase and decrease the refcount.

Signed-off-by: Liang He <windhl@126.com>
[mpe: mpic_alloc() takes its own reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701133126.243102-1-windhl@126.com

powerpc/pci_dn: Add missing of_node_put()

In pci_add_device_node_info(), use of_node_put() to drop the reference
to 'parent' returned by of_get_parent() to keep refcount balance.

Fixes: cca87d303c85 ("powerpc/pci: Refactor pci_dn")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com

powerpc/pseries: Add missing of_node_put()s in hotplug-cpu.c

In pseries_cpuhp_cache_use_count() and pseries_cpuhp_detach_nodes(),
we need carefully hold the reference returned by
of_find_next_cache_node() and use it to call of_node_put() to keep
refcount balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621111701.4082889-1-windhl@126.com

macintosh: Add missing of_node_get() in do_attach()

We need a of_node_get() for of_find_compatible_node() to keep refcount
balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220622061652.4095330-1-windhl@126.com

powerpc/83xx: Add missing of_node_put() in mpc832x_spi_init()

In mpc832x_spi_init(), hold the reference returned by
of_find_compatible_node() and use it to call of_node_put() for refcount
balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621080932.4081935-1-windhl@126.com

powerpc/512x: Add missing of_node_put() in clock-commonclk.c

In mpc5121_clk_provide_migration_support(), hold the reference returned
by of_find_compatible_node() and use it to call of_node_put() for refcount
balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621080349.4081689-1-windhl@126.com

powerpc/powermac: Add missing of_node_put() in smp_core99_setup()

In smp_core99_setup(), add of_node_put() to drop the reference once it's
no longer needed.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220620150518.4074910-1-windhl@126.com

powerpc/sysdev/fsl_msi: Add missing of_node_put()

In fsl_setup_msi_irqs(), use of_node_put() to drop the reference
returned by of_parse_phandle().

Fixes: 895d603f945ba ("powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220704145233.278539-1-windhl@126.com

powerpc/sysdev: Add missing of_node_put()s

Add of_node_put() in various paths to drop references once they are no
longer needed.

Signed-off-by: Liang He <windhl@126.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220620130221.4073228-1-windhl@126.com

powerpc/embedded6xx/ls_uart: Add missing of_node_put()

In ls_uarts_init(), add an of_node_put() to keep refcount balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220620065904.4071787-1-windhl@126.com

powerpc/pseries: Add missing of_node_put() in ibmebus

In ibmebus_match_path(), use of_node_put() to drop the reference
returned by of_find_node_by_path() before testing for equality of the
pointers.

Signed-off-by: Liang He <windhl@126.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619074016.4068105-1-windhl@126.com

powerpc/cell: Add missing of_node_put() in iommu.c

In cell_iommu_init_disabled(), hold the reference returned by
of_find_node_by_name() and use it to call of_node_put() for reference
balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701144949.252364-2-windhl@126.com

powerpc/cell: Add missing of_node_put()s in cbe_regs.c

There are several bugs as following:

(1) In cbe_get_be_node(), hold the reference returned by of_find_xxx and
    of_get_xxx OF APIs and use it to call of_node_put().
(2) In cbe_fill_regs_map(), same as above.
(3) In cbe_regs_init(), during the iteration of for_each_node_by_type(),
    the refcount of 'cpu' will be automatically increased and decreased.
    However, there is a reference escaped out into 'map->cpu_node' and
    it should be properly handled.

Signed-off-by: Liang He <windhl@126.com>
[mpe: Drop references before pointer equality test in cbe_get_be_node()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701144949.252364-1-windhl@126.com

powerpc/cell: Add missing of_node_put()s

Use of_node_put() for of_find_node_by_path() and
of_find_node_by_phandle() to keep refcount balance.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619072335.4067728-1-windhl@126.com

powerpc/kernel: Add missing of_node_put() in legacy_serial.c

In find_legacy_serial_ports(), of_find_node_by_path() will return a node
pointer with refcount incremented. The reference should be dropped with
of_node_put() when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619070811.4067215-1-windhl@126.com

powerpc/perf: Add missing of_node_put()s in imc-pmu.c

In update_events_in_group(), of_find_node_by_phandle() will return
a node pointer with refcount incremented. The reference should be
dropped with of_node_put() in the failure path or when it is not used
anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20220618071353.4059000-1-windhl@126.com

powerpc/embedded6xx: Add missing of_node_put()s

Add missing of_node_put()s in various paths.

Signed-off-by: Liang He <windhl@126.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220618041042.4058066-1-windhl@126.com

powerpc/8xx: Add missing of_node_put() in tqm8xx_setup.c

In init_ioports(), of_find_node_by_name() will return a node pointer
with refcount incremented. The reference should be dropped with
of_node_put() when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220618024930.4056825-1-windhl@126.com

powerpc/maple: Add missing of_node_put() in time.c

In maple_get_boot_time(), of_find_compatible_node() will return
a node pointer with refcount incremented. The reference should be
dropped with of_node_put() when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617124045.4048757-1-windhl@126.com

powerpc/85xx: Add missing of_node_put() in sgy_cst1000

In gpio_halt_probe(), of_find_matching_node() will return a node
pointer with refcount incremented. The reference should be dropped with
of_node_put() in the failure path.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617105011.4041123-1-windhl@126.com

powerpc/52xx: Add missing of_node_put() in media5200.c

In media5200_init_irq(), of_find_compatible_node() will return a
node pointer with refcount incremented. The reference should be dropped
with of_node_put() in the failure path or when it is not used anymore.

Don't worry about 'fpga_np == NULL' as of_node_put() can correctly
handle that.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220616144007.3987743-1-windhl@126.com

powerpc/85xx: Add missing of_node_put() in ksi8560.c

In ksi8560_setup_arch(), of_find_compatible_node() will return a
node pointer with refcount incremented. The reference should be dropped
with of_node_put() when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220616132922.3987053-1-windhl@126.com

powerpc/512x: Add missing of_node_put() in mpc5121_clk_init()

In mpc5121_clk_init(), of_find_compatible_node() will return a
node pointer with refcount incremented. The reference should be dropped
with of_node_put() when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
[mpe: of_clk_add_provider() will take its own reference.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220615143703.3968898-1-windhl@126.com

powerpc/vdso: link with -z noexecstack

With recent binutils, the following warning appears:

  VDSO32L arch/powerpc/kernel/vdso/vdso32.so.dbg
/opt/gcc-12.2.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/12.2.0/../../../../powerpc64-linux/bin/ld: warning: arch/powerpc/kernel/vdso/getcpu-32.o: missing .note.GNU-stack section implies executable stack
/opt/gcc-12.2.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/12.2.0/../../../../powerpc64-linux/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker

To avoid that, explicitly tell the linker we don't want executable
stack.

For more explanations, see commit ffcf9c5700e4 ("x86: link vdso
and boot with -z noexecstack --no-warn-rwx-segments")

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b95f2e3216a574837dd61208444e9515c3423da4.1662132312.git.christophe.leroy@csgroup.eu

powerpc/math-emu: Remove -w build flag and fix warnings

As reported by Nathan, the module_init() macro was not taken into
account because the header was missing. That means spe_mathemu_init()
was never called.

This should have been detected by gcc at build time, but due to
'-w' flag it went undetected.

Removing that flag leads to many warnings hence errors.

Fix those warnings then remove the -w flag.

Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/2663961738a46073713786d4efeb53100ca156e7.1662134272.git.christophe.leroy@csgroup.eu

powerpc/math_emu/efp: Include module.h

When building with a recent version of clang, there are a couple of
errors around the call to module_init():

  arch/powerpc/math-emu/math_efp.c:927:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
  module_init(spe_mathemu_init);
  ^
  int
  arch/powerpc/math-emu/math_efp.c:927:13: error: a parameter list without types is only allowed in a function definition
  module_init(spe_mathemu_init);
              ^
  2 errors generated.

module_init() is a macro, which is not getting expanded because module.h
is not included in this file. Add the include so that the macro can
expand properly, clearing up the build failure.

Fixes: ac6f120369ff ("powerpc/85xx: Workaroudn e500 CPU erratum A005")
[chleroy: added fixes tag]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/8403854a4c187459b2f4da3537f51227b70b9223.1662134272.git.christophe.leroy@csgroup.eu

powerpc/pseries: Move dtl scanning and steal time accounting to pseries platform

dtl is the PAPR Dispatch Trace Log, which is entirely a pseries feature.
The pseries platform alrady has a file dealing with the dtl, so move
scanning for stolen time accounting there from kernel/time.c.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902085316.2071519-5-npiggin@gmail.com

powerpc/64: Remove PPC64 special case for cputime accounting default

Distro kernels tend to be moving to VIRT_CPU_ACCOUNTING_GEN, and there
is not much reason why PPC64 should be special here. Remove the special
case and make the ppc64 and pseries defconfigs use GEN accounting
(others will use TICK, as-per Kconfig defaults).

VIRT_CPU_ACCOUNTING_NATIVE does provide scaled vtime and stolen time
apportioned between system and user time, and vtime accounting is not
unconditionally enabled, and possibly other things. But it would be
better at this point to extend GEN to cover important missing features
rather than directing users back to a less used option.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902085316.2071519-4-npiggin@gmail.com

powerpc/pseries: Implement CONFIG_PARAVIRT_TIME_ACCOUNTING

CONFIG_VIRT_CPU_ACCOUNTING_GEN under pseries does not provide stolen
time accounting unless CONFIG_PARAVIRT_TIME_ACCOUNTING is enabled.
Implement this using the VPA accumulated wait counters.

Note this will not work on current KVM hosts because KVM does not
implement the VPA dispatch counters (yet). It could be implemented
with the dispatch trace log as it is for VIRT_CPU_ACCOUNTING_NATIVE,
but that is not necessary for the more limited accounting provided
by PARAVIRT_TIME_ACCOUNTING, and it is more expensive, complex, and
has downsides like potential log wrap.

From Shrikanth:

  [...] it was tested on Power10 [PowerVM] Shared LPAR. system has two
  LPAR. we will call first one LPAR1 and second one as LPAR2. Test was
  carried out in SMT=1. Similar observation was seen in SMT=8 as well.

  LPAR config header from each LPAR is below. LPAR1 is twice as big as
  LPAR2. Since Both are sharing the same underlying hardware, work
  stealing will happen when both the LPAR's are contending for the same
  resource.

  LPAR1:
  type=Shared mode=Uncapped smt=Off lcpu=40 cpus=40 ent=20.00
  LPAR2:
  type=Shared mode=Uncapped smt=Off lcpu=20 cpus=40 ent=10.00

  mpstat was used to check for the utilization. stress-ng has been used
  as the workload. Few cases are tested. when the both LPAR are idle
  there is no steal time. when LPAR1 starts running at 100% which
  consumes all of the physical resource, steal time starts to get
  accounted.  With LPAR1 running at 100% and LPAR2 starts running, steal
  time starts increasing. This is as expected. When the LPAR2 Load is
  increased further, steal time increases further.

  Case 1: 0% LPAR1; 0% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
   0.00   0.00   0.05   0.00   0.00   0.00   0.00   0.00   0.00  99.95

  Case 2: 100% LPAR1; 0% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  97.68   0.00   0.00   0.00   0.00   0.00   2.32   0.00   0.00   0.00

  Case 3: 100% LPAR1; 50% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  86.34   0.00   0.10   0.00   0.00   0.03  13.54   0.00   0.00   0.00

  Case 4: 100% LPAR1; 100% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  78.54   0.00   0.07   0.00   0.00   0.02  21.36   0.00   0.00   0.00

  Case 5: 50% LPAR1; 100% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  49.37   0.00   0.00   0.00   0.00   0.00   1.17   0.00   0.00  49.47

  Patch is accounting for the steal time and basic tests are holding
  good.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
[mpe: Add SPDX tag to new paravirt_api_clock.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902085316.2071519-3-npiggin@gmail.com

powerpc/pseries: Add wait interval counter definitions to struct lppaca

The hypervisor exposes accumulated partition scheduling interval times
in the VPA (lppaca). These can be used to implement a simple stolen time
in the guest without complex and costly dtl scanning.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Link: https://lore.kernel.org/r/20220902085316.2071519-2-npiggin@gmail.com

selftests/powerpc: Skip 4PB test on 4K PAGE_SIZE systems

Systems using the hash MMU with a 4K page size don't support 4PB address
space, so skip the test because the bug it tests for can't be triggered.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220901020215.254097-1-mpe@ellerman.id.au

powerpc/configs: Properly enable PAPR_SCM in pseries_defconfig

My commit to add PAPR_SCM to pseries_defconfig failed to add the
required dependencies, meaning the driver doesn't get built.

Add the required LIBNVDIMM=m.

Fixes: d6481a7195df ("powerpc/configs: Add PAPR_SCM to pseries_defconfig")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220901014253.252927-1-mpe@ellerman.id.au

powerpc/32: Remove wii_memory_fixups()

wii_memory_fixups() is not called anymore, remove it.

Also remove left-overs in mmu_decl.h which were forgotten by
commit 160985f3025b ("powerpc/wii: remove wii_mmu_mapin_mem2()")

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5f2091f86528b59ef92ef1daed5d3dd8c0d7bebd.1661938317.git.christophe.leroy@csgroup.eu

powerpc/32: Allow fragmented physical memory

Since commit 9e849f231c3c ("powerpc/mm/32s: use generic mmu_mapin_ram()
for all blocks.") it is possible to map all blocks as RAM on any PPC32.

Remove related restrictions.

And remove call to wii_memory_fixups() which doesn't do anything else
than checks since commit 160985f3025b ("powerpc/wii: remove
wii_mmu_mapin_mem2()")

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fc9a5b8ef49f6eb86e970d4c7ccfba9b407fd4eb.1661938317.git.christophe.leroy@csgroup.eu

powerpc/32: Drop a stale comment about reservation of gigantic pages

A comment about the reservation of gigantic pages was left in MMU_init()
after commit 79cc38ded1e1 ("powerpc/mm/hugetlb: Add support for
reserving gigantic huge pages via kernel command line")

Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/959d77be630b9b46a7458f0fbd41dc3a94ec811a.1661938317.git.christophe.leroy@csgroup.eu

powerpc/code-patching: Speed up page mapping/unmapping

Since commit 591b4b268435 ("powerpc/code-patching: Pre-map patch area")
the patch area is premapped so intermediate page tables are already
allocated.

Use __set_pte_at() directly instead of the heavy map_kernel_page(),
at for unmapping just do a pte_clear() followed by a flush.

__set_pte_at() can be used directly without the filters in
set_pte_at() because we are mapping a normal page non executable.

Make sure gcc knows text_poke_area is page aligned in order to
optimise the flush.

This change reduces by 66% the time needed to activate ftrace on
an 8xx (588000 tb ticks instead of 1744000).

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add ptesync needed on radix to avoid spurious fault]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220815114840.1468656-1-mpe@ellerman.id.au

powerpc/82xx: remove spidev node from mgcoge

Commit 956b200a846e ("spi: spidev: Warn loudly if instantiated from DT
as "spidev"") states that there should not be spidev nodes in DTs.
Remove this non-HW description. There won't be a regression because it
won't bind since 2015 anyhow.

Fixes: 5d1d67e361ea ("powerpc/82xx: add SPI support for mgcoge")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220824082130.21934-3-wsa+renesas@sang-engineering.com

powerpc/microwatt: Add LiteX MMC driver

Enable the LiteX MMC device and it's dependency the common clock
framework.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220804015708.5928-1-joel@jms.id.au

selftests/powerpc: Add a test for execute-only memory

This selftest is designed to cover execute-only protections
on the Radix MMU but will also work with Hash.

The tests are based on those found in pkey_exec_test with modifications
to use the generic mprotect() instead of the pkey variants.

Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220817050640.406017-2-ruscur@russell.cc

powerpc/mm: Support execute-only memory on the Radix MMU

Add support for execute-only memory (XOM) for the Radix MMU by using an
execute-only mapping, as opposed to the RX mapping used by powerpc's
other MMUs.

The Hash MMU already supports XOM through the execute-only pkey,
which is a separate mechanism shared with x86.  A PROT_EXEC-only mapping
will map to RX, and then the pkey will be applied on top of it.

mmap() and mprotect() consumers in userspace should observe the same
behaviour on Hash and Radix despite the differences in implementation.

Replacing the vma_is_accessible() check in access_error() with a read
check should be functionally equivalent for non-Radix MMUs, since it
follows write and execute checks.  For Radix, the change enables
detecting faults on execute-only mappings where vma_is_accessible() would
return true.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220817050640.406017-1-ruscur@russell.cc

macintosh: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Link: https://lore.kernel.org/r/20220818210026.6940-1-wsa+renesas@sang-engineering.com

powerpc: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Link: https://lore.kernel.org/r/20220818205946.6336-1-wsa+renesas@sang-engineering.com

powerpc/fsl_booke: Make calc_cam_sz() static

calc_cam_sz() is used only in fsl_book3e.c, make it static.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a7469848371b2cf5e8f654ec79800e209d88595e.1660919200.git.christophe.leroy@csgroup.eu

powerpc: Remove stale declarations in mmu_decl.h

rtas_size and rtas_data are not used anymore since at least
commit 7c8c6b9776fb ("powerpc: Merge lmb.c and make MM initialization
use it.")

Remove them.

Since commit 4b74a35fc7e9 ("powerpc/32s: Make Hash var static")
the forward declaration of struct hash_pte is unneeded.

Remove it.

__initial_memory_limit_addr was removed by commit e63075a3c937 ("memblock:
Introduce default allocation limit and use it to replace explicit ones")

Remove the declaration.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a821e8397dd56b8177ecc04966d3b3a7c4bda6d4.1660919016.git.christophe.leroy@csgroup.eu

powerpc: Update ISA versions to mention e5500/e6500

Add the NXP (nee Freescale) e5500 and e6500 to the ISA versions
documentation.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220803063228.1250030-1-mpe@ellerman.id.au

powerpc: Move patch sites out of asm-prototypes.h

The definitions for the patch sites etc. don't belong in
asm-prototypes.h, they are not EXPORT'ed asm symbols.

Move them into sections.h which is traditionally used for asm symbols.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220818050659.187181-1-mpe@ellerman.id.au

powerpc/boot: Drop unused dummy.c

The last use of dummy.c was dropped in commit 2bf118197cb4 ("[POWERPC]
Create a "wrapper" script and use it in arch/powerpc/boot").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220819110556.434970-1-mpe@ellerman.id.au

powerpc/boot: Convert more files to use SPDX tags

These files are all plain GPL 2.0, with a second sentence about being
licensed as-is.

Similar to the rule in commit 577b61cee5b2 ("treewide: Replace GPLv2
boilerplate/reference with SPDX - gpl-2.0_398.RULE").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220819110430.433984-1-mpe@ellerman.id.au

powerpc/vdso: Don't map VDSO at a fixed address on PPC32

PPC64 removed default mapping address from VDSO in
commit 30d0b3682887 ("powerpc: Move 64bit VDSO to improve context
switch performance").

Do like PPC64 and let get_unmapped_area() place the VDSO mapping
at the address it wants, don't force a default address.

This allows randomisation of VDSO address.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cba76f5a5b01fcc49415e632d92c11c1c5998cab.1660843877.git.christophe.leroy@csgroup.eu

powerpc/selftests: Use timersub() for gettimeofday()

Use timersub() function to simplify the code.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220816105106.82666-1-ye.xingchen@zte.com.cn

Linux 6.0-rc2

Merge tag 'irq-urgent-2022-08-21' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:
 "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix"

* tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/loongson-liointc: Fix an error handling path in liointc_init()
  irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse
  irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI
  irqchip/loongson-eiointc: Fix a build warning
  irqchip/loongson-eiointc: Fix irq affinity setting
  iommu/hyper-v: Use helper instead of directly accessing affinity

Merge tag 'perf-urgent-2022-08-21' of git://git./linux/kernel/git/tip/tip

Pull x86 kprobes fix from Ingo Molnar:
 "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
  such instructions, possibly resulting in incorrect execution (the
  wrong branch taken)"

* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix JNG/JNLE emulation

Merge tag 'trace-v6.0-rc1-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Various fixes for tracing:

   - Fix a return value of traceprobe_parse_event_name()

   - Fix NULL pointer dereference from failed ftrace enabling

   - Fix NULL pointer dereference when asking for registers from eprobes

   - Make eprobes consistent with kprobes/uprobes, filters and
     histograms"

* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have filter accept "common_cpu" to be consistent
  tracing/probes: Have kprobes and uprobes use $COMM too
  tracing/eprobes: Have event probes be consistent with kprobes and uprobes
  tracing/eprobes: Fix reading of string fields
  tracing/eprobes: Do not hardcode $comm as a string
  tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
  ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
  tracing/perf: Fix double put of trace event when init fails
  tracing: React to error return from traceprobe_parse_event_name()

tracing: Have filter accept "common_cpu" to be consistent

Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.

Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71c5053 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/probes: Have kprobes and uprobes use $COMM too

Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.

Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281ee5 ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/eprobes: Have event probes be consistent with kprobes and uprobes

Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.

Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.

For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.

Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/eprobes: Fix reading of string fields

Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.

Now when a string field is used, the ":string" type can be used to display
it:

  echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events

Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/eprobes: Do not hardcode $comm as a string

The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.

Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.

Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/eprobes: Do not allow eprobes to use $stack, or % for regs

While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:

 BUG: kernel NULL pointer dereference, address: 0000000000000024
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
 RIP: 0010:get_event_field.isra.0+0x0/0x50
 Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
 RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
 RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
 RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
 R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
 Call Trace:
  <TASK>
  get_eprobe_size+0xb4/0x640
  ? __mod_node_page_state+0x72/0xc0
  __eprobe_trace_func+0x59/0x1a0
  ? __mod_lruvec_page_state+0xaa/0x1b0
  ? page_remove_file_rmap+0x14/0x230
  ? page_remove_rmap+0xda/0x170
  event_triggers_call+0x52/0xe0
  trace_event_buffer_commit+0x18f/0x240
  trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
  try_to_wake_up+0x260/0x4c0
  __wake_up_common+0x80/0x180
  __wake_up_common_lock+0x7c/0xc0
  do_notify_parent+0x1c9/0x2a0
  exit_notify+0x1a9/0x220
  do_exit+0x2ba/0x450
  do_group_exit+0x2d/0x90
  __x64_sys_exit_group+0x14/0x20
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Obviously this is not the desired result.

Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used.

Link: https://lkml.kernel.org/r/20220820134400.564426983@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead

ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:

register_ftrace_function
  ftrace_startup
    __register_ftrace_function
      ...
      add_ftrace_ops(&ftrace_ops_list, ops)
      ...
    ...
    ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
    ...
  return 0 // ops is in the ftrace_ops_list.

When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
  ftrace_shutdown
    if (unlikely(ftrace_disabled))
            return -ENODEV;  // return here, __unregister_ftrace_function is not executed,
                             // as a result, ops is still in the ftrace_ops_list
    __unregister_ftrace_function
    ...

If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:

is_ftrace_trampoline
  ftrace_ops_trampoline
    do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!

Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G    B   W         5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS:  00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list.

Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/perf: Fix double put of trace event when init fails

If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.

The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().

 WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20

If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.

Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.

Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 1d18538e6a092 ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: React to error return from traceprobe_parse_event_name()

The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.

Commit 95c104c378dc ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.

Reinstate using the return value in the error-return-value checking.

Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com
Fixes: 95c104c378dc ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'i2c-for-6.0-rc2' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A revert to fix a regression introduced this merge window and a fix
  for proper error handling in the remove path of the iMX driver"

* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Make sure to unregister adapter on remove()
  Revert "i2c: scmi: Replace open coded device_get_match_data()"

Merge tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client fixes from Steve French:

 - memory leak fix

 - two small cleanups

 - trivial strlcpy removal

 - update missing entry for cifs headers in MAINTAINERS file

* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: move from strlcpy with unused retval to strscpy
  cifs: Fix memory leak on the deferred close
  cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
  cifs: remove unused server parameter from calc_smb_size()
  cifs: missing directory in MAINTAINERS file

asm goto: eradicate CC_HAS_ASM_GOTO

GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.

Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.

The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.

Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.

Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2c: imx: Make sure to unregister adapter on remove()

If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Revert "i2c: scmi: Replace open coded device_get_match_data()"

This reverts commit 9ae551ded5ba55f96a83cd0811f7ef8c2f329d0c. We got a
regression report, so ensure this machine boots again. We will come back
with a better version hopefully.

Reported-by: Josef Johansson <josef@oderland.se>
Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.se
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'kbuild-fixes-v6.0' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix module versioning broken on some architectures

 - Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128

 - Remove -Wformat-zero-length, which has no warning instance

 - Fix the order between drivers and libs in modules.order

 - Fix false-positive warnings in clang-analyzer

* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
  kbuild: fix the modules order between drivers and libs
  scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
  kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
  modpost: fix module versioning when a symbol lacks valid CRC

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix alignment for cpu map masks in event encoding.

 - Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
   that was added in this merge window.

 - Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
   cpufeatures, i915_drm, kvm, vhost, perf_event.

* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Support reading PERF_FORMAT_LOST
  libperf: Add a test case for read formats
  libperf: Handle read format in perf_evsel__read()
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools headers kvm s390: Sync headers with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf cpumap: Fix alignment for masks in event encoding
  perf cpumap: Compute mask size in constant time
  perf cpumap: Synthetic events and const/static
  perf cpumap: Const map for max()

Merge tag 's390-6.0-1' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

 - Fix a KVM crash on z12 and older machines caused by a wrong
   assumption that Query AP Configuration Information is always
   available.

 - Lower severity of excessive Hypervisor filesystem error messages
   when booting under KVM.

* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: fix crash on older machines based on QCI info missing
  s390/hypfs: avoid error message under KVM

Merge tag 'powerpc-6.0-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix atomic sleep warnings at boot due to get_phb_number() taking a
   mutex with a spinlock held on some machines.

 - Add missing PMU selftests to .gitignores.

Thanks to Guenter Roeck and Russell Currey.

* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Add missing PMU selftests to .gitignores
  powerpc/pci: Fix get_phb_number() locking

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "A few minor fixes:

   - Fix buffer management in SRP to correct a regression with the login
     authentication feature from v5.17

   - Don't iterate over non-present ports in mlx5

   - Fix an error introduced by the foritify work in cxgb4

   - Two bug fixes for the recently merged ERDMA driver

   - Unbreak RDMA dmabuf support, a regresion from v5.19"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA: Handle the return code from dma_resv_wait_timeout() properly
  RDMA/erdma: Correct the max_qp and max_cq capacities of the device
  RDMA/erdma: Using the key in FMR WR instead of MR structure
  RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
  RDMA/mlx5: Use the proper number of ports
  IB/iser: Fix login with authentication