Christophe Jaillet [Tue, 8 May 2018 05:44:27 +0000 (07:44 +0200)]
iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()'
The error handling path of 'c4iw_get_dma_mr()' does not free resources
in the correct order.
If an error occures, it can leak 'mhp->wr_waitp'.
Fixes:
a3f12da0e99a ("iw_cxgb4: allocate wait object for each memory object")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 7 May 2018 17:23:38 +0000 (13:23 -0400)]
RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
The current code sets an affinity hint with a cpumask_t stored on the
stack. This value can then be accessed through /proc/irq/*/affinity_hint/,
causing a segfault or returning corrupt data.
Move the cpumask_t into struct i40iw_msix_vector so it is available later.
Backtrace:
BUG: unable to handle kernel paging request at
ffffb16e600e7c90
IP: irq_affinity_hint_proc_show+0x60/0xf0
PGD
17c0c6d067
PUD
17c0c6e067
PMD
15d4a0e067
PTE 0
Oops: 0000 [#1] SMP
Modules linked in: ...
CPU: 3 PID: 172543 Comm: grep Tainted: G OE ... #1
Hardware name: ...
task:
ffff9a5caee08000 task.stack:
ffffb16e659d8000
RIP: 0010:irq_affinity_hint_proc_show+0x60/0xf0
RSP: 0018:
ffffb16e659dbd20 EFLAGS:
00010086
RAX:
0000000000000246 RBX:
ffffb16e659dbd20 RCX:
0000000000000000
RDX:
ffffb16e600e7c90 RSI:
0000000000000003 RDI:
0000000000000046
RBP:
ffffb16e659dbd88 R08:
0000000000000038 R09:
0000000000000001
R10:
0000000070803079 R11:
0000000000000000 R12:
ffff9a59d1d97a00
R13:
ffff9a5da47a6cd8 R14:
ffff9a5da47a6c00 R15:
ffff9a59d1d97a00
FS:
00007f946c31d740(0000) GS:
ffff9a5dc1800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffb16e600e7c90 CR3:
00000016a4339000 CR4:
00000000007406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
seq_read+0x12d/0x430
? sched_clock_cpu+0x11/0xb0
proc_reg_read+0x48/0x70
__vfs_read+0x37/0x140
? security_file_permission+0xa0/0xc0
vfs_read+0x96/0x140
SyS_read+0x58/0xc0
do_syscall_64+0x5a/0x190
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f946bbc97e0
RSP: 002b:
00007ffdd0c4ae08 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
RAX:
ffffffffffffffda RBX:
000000000096b000 RCX:
00007f946bbc97e0
RDX:
000000000096b000 RSI:
00007f946a2f0000 RDI:
0000000000000004
RBP:
0000000000001000 R08:
00007f946a2ef011 R09:
000000000000000a
R10:
0000000000001000 R11:
0000000000000246 R12:
00007f946a2f0000
R13:
0000000000000004 R14:
0000000000000000 R15:
00007f946a2f0000
Code: b9 08 00 00 00 49 89 c6 48 89 df 31 c0 4d 8d ae d8 00 00 00 f3 48 ab 4c 89 ef e8 6c 9a 56 00 49 8b 96 30 01 00 00 48 85 d2 74 3f <48> 8b 0a 48 89 4d 98 48 8b 4a 08 48 89 4d a0 48 8b 4a 10 48 89
RIP: irq_affinity_hint_proc_show+0x60/0xf0 RSP:
ffffb16e659dbd20
CR2:
ffffb16e600e7c90
Fixes:
8e06af711bf2 ("i40iw: add main, hdr, status")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 7 May 2018 17:23:37 +0000 (13:23 -0400)]
RDMA/i40iw: Avoid reference leaks when processing the AEQ
In this switch there is a reference held on the QP. 'continue' will grab
the next event without releasing the reference, causing a leak.
Change it to 'break' to drop the reference before grabbing the next event.
Fixes:
4e9042e647ff ("i40iw: add hw and utils files")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 7 May 2018 17:23:36 +0000 (13:23 -0400)]
RDMA/i40iw: Avoid panic when objects are being created and destroyed
A panic occurs when there is a newly-registered element on the QP/CQ MR
list waiting to be attached, but a different MR is deregistered. The
current code only checks for whether the list is empty, not whether the
element being deregistered is actually on the list.
Fix the panic by adding a boolean to track if the object is on the list.
Fixes:
d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:13 +0000 (10:57 +0800)]
RDMA/hns: Fix the bug with NULL pointer
When the last QP of eight QPs is not exist in
hns_roce_v1_mr_free_work_fn function, the
print for qpn of hr_qp may introduce a
calltrace for NULL pointer.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:12 +0000 (10:57 +0800)]
RDMA/hns: Set NULL for __internal_mr
This patch mainly configure value for __internal_mr of mr_free_pd.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:11 +0000 (10:57 +0800)]
RDMA/hns: Enable inner_pa_vld filed of mpt
When enabled inner_pa_vld field of mpt, The pa0 and
pa1 will be valid and the hardware will use it
directly and not use base address of pbl. As a
result, it can reduce the delay.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:10 +0000 (10:57 +0800)]
RDMA/hns: Set desc_dma_addr for zero when free cmq desc
In order to avoid illegal use for desc_dma_addr of ring,
it needs to set it zero when free cmq desc.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:09 +0000 (10:57 +0800)]
RDMA/hns: Fix the bug with rq sge
When received multiply rq sge, it should tag the
invalid lkey for the last non-zero length sge
when have some sges' length are zero. This patch
fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:08 +0000 (10:57 +0800)]
RDMA/hns: Not support qp transition from reset to reset for hip06
Because hip06 hardware is not support for qp transition from
reset to reset state, it need to return errno when qp
transited from reset to reset. This patch fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:07 +0000 (10:57 +0800)]
RDMA/hns: Add return operation when configured global param fail
When configure global param function run fail, it should directly return
and the initial flow will stop.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:06 +0000 (10:57 +0800)]
RDMA/hns: Update convert function of endian format
Because the sys_image_guid of ib_device_attr structure is __be64, it
need to use cpu_to_be64 for converting.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:05 +0000 (10:57 +0800)]
RDMA/hns: Load the RoCE dirver automatically
To enable the linux-kernel system to load the hns-roce-hw-v2 driver
automatically when hns-roce-hw-v2 is plugged in pci bus, it need to
create a MODULE_DEVICE_TABLE for expose the pci_table of
hns-roce-hw-v2 to user.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reported-by: Zhou Wang <wangzhou1@hisilicon.com>
Tested-by: Xiaojun Tan <tanxiaojun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:04 +0000 (10:57 +0800)]
RDMA/hns: Bugfix for rq record db for kernel
When used rq record db for kernel, it needs to set the rdb_en of
hr_qp to 1 and configures the dma address of record rq db of qp
context.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:03 +0000 (10:57 +0800)]
RDMA/hns: Add rq inline flags judgement
It needs to set the rqie field of qp context by configured rq inline
flags. Besides, it need to decide whether posting inline rqwqe by
judged rq inline flags.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alexandru Moise [Tue, 8 May 2018 09:02:02 +0000 (11:02 +0200)]
nvmet,rxe: defer ip datagram sending to tasklet
This addresses 3 separate problems:
1. When using NVME over Fabrics we may end up sending IP
packets in interrupt context, we should defer this work
to a tasklet.
[ 50.939957] WARNING: CPU: 3 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x1f/0xa0
[ 50.942602] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 4.17.0-rc3-ARCH+ #104
[ 50.945466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[ 50.948163] RIP: 0010:__local_bh_enable_ip+0x1f/0xa0
[ 50.949631] RSP: 0018:
ffff88009c183900 EFLAGS:
00010006
[ 50.951029] RAX:
0000000080010403 RBX:
0000000000000200 RCX:
0000000000000001
[ 50.952636] RDX:
0000000000000000 RSI:
0000000000000200 RDI:
ffffffff817e04ec
[ 50.954278] RBP:
ffff88009c183910 R08:
0000000000000001 R09:
0000000000000614
[ 50.956000] R10:
ffffea00021d5500 R11:
0000000000000001 R12:
ffffffff817e04ec
[ 50.957779] R13:
0000000000000000 R14:
ffff88009566f400 R15:
ffff8800956c7000
[ 50.959402] FS:
0000000000000000(0000) GS:
ffff88009c180000(0000) knlGS:
0000000000000000
[ 50.961552] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 50.963798] CR2:
000055c4ec0ccac0 CR3:
0000000002209001 CR4:
00000000000606e0
[ 50.966121] Call Trace:
[ 50.966845] <IRQ>
[ 50.967497] __dev_queue_xmit+0x62d/0x690
[ 50.968722] dev_queue_xmit+0x10/0x20
[ 50.969894] neigh_resolve_output+0x173/0x190
[ 50.971244] ip_finish_output2+0x2b8/0x370
[ 50.972527] ip_finish_output+0x1d2/0x220
[ 50.973785] ? ip_finish_output+0x1d2/0x220
[ 50.975010] ip_output+0xd4/0x100
[ 50.975903] ip_local_out+0x3b/0x50
[ 50.976823] rxe_send+0x74/0x120
[ 50.977702] rxe_requester+0xe3b/0x10b0
[ 50.978881] ? ip_local_deliver_finish+0xd1/0xe0
[ 50.980260] rxe_do_task+0x85/0x100
[ 50.981386] rxe_run_task+0x2f/0x40
[ 50.982470] rxe_post_send+0x51a/0x550
[ 50.983591] nvmet_rdma_queue_response+0x10a/0x170
[ 50.985024] __nvmet_req_complete+0x95/0xa0
[ 50.986287] nvmet_req_complete+0x15/0x60
[ 50.987469] nvmet_bio_done+0x2d/0x40
[ 50.988564] bio_endio+0x12c/0x140
[ 50.989654] blk_update_request+0x185/0x2a0
[ 50.990947] blk_mq_end_request+0x1e/0x80
[ 50.991997] nvme_complete_rq+0x1cc/0x1e0
[ 50.993171] nvme_pci_complete_rq+0x117/0x120
[ 50.994355] __blk_mq_complete_request+0x15e/0x180
[ 50.995988] blk_mq_complete_request+0x6f/0xa0
[ 50.997304] nvme_process_cq+0xe0/0x1b0
[ 50.998494] nvme_irq+0x28/0x50
[ 50.999572] __handle_irq_event_percpu+0xa2/0x1c0
[ 51.000986] handle_irq_event_percpu+0x32/0x80
[ 51.002356] handle_irq_event+0x3c/0x60
[ 51.003463] handle_edge_irq+0x1c9/0x200
[ 51.004473] handle_irq+0x23/0x30
[ 51.005363] do_IRQ+0x46/0xd0
[ 51.006182] common_interrupt+0xf/0xf
[ 51.007129] </IRQ>
2. Work must always be offloaded to tasklet for rxe_post_send_kernel()
when using NVMEoF in order to solve lock ordering between neigh->ha_lock
seqlock and the nvme queue lock:
[ 77.833783] Possible interrupt unsafe locking scenario:
[ 77.833783]
[ 77.835831] CPU0 CPU1
[ 77.837129] ---- ----
[ 77.838313] lock(&(&n->ha_lock)->seqcount);
[ 77.839550] local_irq_disable();
[ 77.841377] lock(&(&nvmeq->q_lock)->rlock);
[ 77.843222] lock(&(&n->ha_lock)->seqcount);
[ 77.845178] <Interrupt>
[ 77.846298] lock(&(&nvmeq->q_lock)->rlock);
[ 77.847986]
[ 77.847986] *** DEADLOCK ***
3. Same goes for the lock ordering between sch->q.lock and nvme queue lock:
[ 47.634271] Possible interrupt unsafe locking scenario:
[ 47.634271]
[ 47.636452] CPU0 CPU1
[ 47.637861] ---- ----
[ 47.639285] lock(&(&sch->q.lock)->rlock);
[ 47.640654] local_irq_disable();
[ 47.642451] lock(&(&nvmeq->q_lock)->rlock);
[ 47.644521] lock(&(&sch->q.lock)->rlock);
[ 47.646480] <Interrupt>
[ 47.647263] lock(&(&nvmeq->q_lock)->rlock);
[ 47.648492]
[ 47.648492] *** DEADLOCK ***
Using NVMEoF after this patch seems to finally be stable, without it,
rxe eventually deadlocks the whole system and causes RCU stalls.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mustafa Ismail [Mon, 7 May 2018 17:52:18 +0000 (12:52 -0500)]
i40iw: Use correct address in dst_neigh_lookup for IPv6
Use of incorrect structure address for IPv6 neighbor lookup
causes connections to IPv6 addresses to fail. Fix this by
using correct address in call to dst_neigh_lookup.
Fixes:
f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mustafa Ismail [Mon, 7 May 2018 17:52:17 +0000 (12:52 -0500)]
i40iw: Fix memory leak in error path of create QP
If i40iw_allocate_dma_mem fails when creating a QP, the
memory allocated for the QP structure using kzalloc is not
freed because iwqp->allocated_buffer is used to free the
memory and it is not setup until later. Fix this by setting
iwqp->allocated_buffer before allocating the dma memory.
Fixes:
d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Daria Velikovsky [Mon, 7 May 2018 07:20:02 +0000 (10:20 +0300)]
RDMA/mlx5: Use proper spec flow label type
Flow label is defined as u32 in the in ipv6 flow spec, but
used internally in the flow specs parsing as u8. That was
causing loss of part of flow_label value.
Fixes:
2d1e697e9b716 ('IB/mlx5: Add support to match inner packet fields')
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yishai Hadas [Mon, 7 May 2018 07:20:01 +0000 (10:20 +0300)]
RDMA/mlx5: Don't assume that medium blueFlame register exists
User can leave system without medium BlueFlames registers,
however the code assumed that at least one such register exists.
This patch fixes that assumption.
Fixes:
c1be5232d21d ("IB/mlx5: Fix micro UAR allocator")
Reported-by: Rohit Zambre <rzambre@uci.edu>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Wed, 2 May 2018 13:42:51 +0000 (06:42 -0700)]
IB/hfi1: Use after free race condition in send context error path
A pio send egress error can occur when the PSM library attempts to
to send a bad packet. That issue is still being investigated.
The pio error interrupt handler then attempts to progress the recovery
of the errored pio send context.
Code inspection reveals that the handling lacks the necessary locking
if that recovery interleaves with a PSM close of the "context" object
contains the pio send context.
The lack of the locking can cause the recovery to access the already
freed pio send context object and incorrectly deduce that the pio
send context is actually a kernel pio send context as shown by the
NULL deref stack below:
[<
ffffffff8143d78c>] _dev_info+0x6c/0x90
[<
ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1]
[<
ffffffff816ab124>] ? __schedule+0x424/0x9b0
[<
ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1]
[<
ffffffff810aa3ba>] process_one_work+0x17a/0x440
[<
ffffffff810ab086>] worker_thread+0x126/0x3c0
[<
ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0
[<
ffffffff810b252f>] kthread+0xcf/0xe0
[<
ffffffff810b2460>] ? insert_kthread_work+0x40/0x40
[<
ffffffff816b8798>] ret_from_fork+0x58/0x90
[<
ffffffff810b2460>] ? insert_kthread_work+0x40/0x40
This is the best case scenario and other scenarios can corrupt the
already freed memory.
Fix by adding the necessary locking in the pio send context error
handler.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Thu, 3 May 2018 18:37:46 +0000 (21:37 +0300)]
MAINTAINERS: Remove bouncing @mellanox.com addresses
Delete non-existent @mellanox.com addresses from MAINTAINERS file.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Fri, 4 May 2018 03:29:19 +0000 (20:29 -0700)]
IB: remove redundant INFINIBAND kconfig dependencies
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for
options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND.
Remove the unnecessary INFINIBAND depends.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Wed, 2 May 2018 10:18:59 +0000 (13:18 +0300)]
RDMA/cma: Do not query GID during QP state transition to RTR
When commit [1] was added, SGID was queried to derive the SMAC address.
Then, later on during a refactor [2], SMAC was no longer needed. However,
the now useless GID query remained. Then during additional code changes
later on, the GID query was being done in such a way that it caused iWARP
queries to start breaking. Remove the useless GID query and resolve the
iWARP breakage at the same time.
This is discussed in [3].
[1] commit
dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures")
[2] commit
5c266b2304fb ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av")
[3] https://www.spinics.net/lists/linux-rdma/msg63951.html
Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jack Morgenstein [Wed, 2 May 2018 10:04:25 +0000 (13:04 +0300)]
IB/mlx4: Fix integer overflow when calculating optimal MTT size
When the kernel was compiled using the UBSAN option,
we saw the following stack trace:
[ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27
[ 1184.828114] signed integer overflow:
[ 1184.828247] -
2147483648 - 1 cannot be represented in type 'int'
The problem was caused by calling round_up in procedure
mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack
trace) with the second parameter (1 << block_shift) (which is an int).
The second parameter should have been (1ULL << block_shift) (which
is an unsigned long long).
(1 << block_shift) is treated by the compiler as an int (because 1 is
an integer).
Now, local variable block_shift is initialized to 31.
If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-
214748368.
This is the most negative int value.
Inside the round_up macro, there is a cast applied to ((1 << 31) - 1).
However, this cast is applied AFTER ((1 << 31) - 1) is calculated.
Since (1 << 31) is treated as an int, we get the negative overflow
identified by UBSAN in the process of calculating ((1 << 31) - 1).
The fix is to change (1 << block_shift) to (1ULL << block_shift) on
line 349.
Fixes:
9901abf58368 ("IB/mlx4: Use optimal numbers of MTT entries")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Tue, 1 May 2018 12:36:13 +0000 (05:36 -0700)]
IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
When IRQ affinity is set and the interrupt type is unknown, a cpu
mask allocated within the function is never freed. Fix this memory
leak by allocating memory within the scope where it is used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Tue, 1 May 2018 12:36:06 +0000 (05:36 -0700)]
IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
When allocating device data, if there's an allocation failure, the
already allocated memory won't be freed such as per-cpu counters.
Fix memory leaks in exception path by creating a common reentrant
clean up function hfi1_clean_devdata() to be used at driver unload
time and device data allocation failure.
To accomplish this, free_platform_config() and clean_up_i2c() are
changed to be reentrant to remove dependencies when they are called
in different order. This helps avoid NULL pointer dereferences
introduced by this patch if those two functions weren't reentrant.
In addition, set dd->int_counter, dd->rcv_limit,
dd->send_schedule and dd->tx_opstats to NULL after they're freed in
hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Tue, 1 May 2018 12:35:58 +0000 (05:35 -0700)]
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used
When an invalid num_vls is used as a module parameter, the code
execution follows an exception path where the macro dd_dev_err()
expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This
causes a NULL pointer dereference.
Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev
earlier in the code. If a dd exists, then dd->pcidev and
dd->pcidev->dev always exists.
BUG: unable to handle kernel NULL pointer dereference
at
00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
dev_err+0x6c/0x90
? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
hfi1_init_dd+0xdd/0x2530 [hfi1]
? pci_conf1_read+0xb2/0xf0
? pci_read_config_word.part.9+0x64/0x80
? pci_conf1_write+0xb0/0xf0
? pcie_capability_clear_and_set_word+0x57/0x80
init_one+0x141/0x490 [hfi1]
local_pci_probe+0x3f/0xa0
work_for_cpu_fn+0x10/0x20
process_one_work+0x152/0x350
worker_thread+0x1cf/0x3e0
kthread+0xf5/0x130
? max_active_store+0x80/0x80
? kthread_bind+0x10/0x10
? do_syscall_64+0x6e/0x1a0
? SyS_exit_group+0x10/0x10
ret_from_fork+0x35/0x40
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Tue, 1 May 2018 12:35:51 +0000 (05:35 -0700)]
IB/hfi1: Fix loss of BECN with AHG
AHG may be armed to use the stored header, which by design is limited
to edits in the PSN/A 32 bit word (bth2).
When the code is trying to send a BECN, the use of the stored header
will lose the BECN bit.
Fix by avoiding AHG when getting ready to send a BECN. This is
accomplished by always claiming the packet is not a middle packet which
is an AHG precursor. BECNs are not a normal case and this should not
hurt AHG optimizations.
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 1 May 2018 12:35:43 +0000 (05:35 -0700)]
IB/hfi1 Use correct type for num_user_context
The module parameter num_user_context is defined as 'int' and
defaults to -1. The module_param_named() says that it is uint.
Correct module_param_named() type information and update the modinfo
text to reflect the default value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Tue, 1 May 2018 12:35:36 +0000 (05:35 -0700)]
IB/hfi1: Fix handling of FECN marked multicast packet
The code for handling a marked UD packet unconditionally returns the
dlid in the header of the FECN marked packet. This is not correct
for multicast packets where the DLID is in the multicast range.
The subsequent attempt to send the CNP with the multicast lid will
cause the chip to halt the ack send context because the source
lid doesn't match the chip programming. The send context will
be halted and flush any other pending packets in the pio ring causing
the CNP to not be sent.
A part of investigating the fix, it was determined that the 16B work
broke the FECN routine badly with inconsistent use of 16 bit and 32 bits
types for lids and pkeys. Since the port's source lid was correctly 32
bits the type mixmatches need to be dealt with at the same time as
fixing the CNP header issue.
Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD
packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes:
88733e3b8450 ("IB/hfi1: Add 16B UD support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Håkon Bugge [Wed, 18 Apr 2018 14:24:50 +0000 (16:24 +0200)]
IB/core: Make ib_mad_client_id atomic
Currently, the kernel protects access to the agent ID allocator on a per
port basis using a spinlock, so it is impossible for two apps/threads on
the same port to get the same TID, but it is entirely possible for two
threads on different ports to end up with the same TID.
As this can be confusing (regardless of it being legal according to the
IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage),
and as the rdma-core user space API for /dev/umad devices implies unique
TIDs even across ports, make the TID an atomic type so that no two
allocations, regardless of port number, will be the same.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bharat Potnuri [Fri, 27 Apr 2018 11:11:16 +0000 (16:41 +0530)]
iw_cxgb4: Atomically flush per QP HW CQEs
When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire
corresponding QP lock before moving the CQEs into its corresponding SW
queue and accessing the SQ contents for completing a WR.
Ignore CQEs if corresponding QP is already flushed.
Cc: stable@vger.kernel.org
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ariel Levkovich [Thu, 26 Apr 2018 12:42:55 +0000 (15:42 +0300)]
IB/uverbs: Fix kernel crash during MR deregistration flow
This patch fixes a crash that happens due to access to an
uninitialized DM pointer within the MR object.
The change makes sure the DM pointer in the MR object is set to
NULL during a non-DM MR creation to prevent a false indication
that this MR is related to a DM in the dereg flow.
Fixes:
be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support")
Reported-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ariel Levkovich [Thu, 26 Apr 2018 12:42:54 +0000 (15:42 +0300)]
IB/uverbs: Prevent reregistration of DM_MR to regular MR
This patch adds a check in the ib_uverbs_rereg_mr flow to make
sure there's no attempt to rereg a device memory MR to regular MR.
In such case the command will fail with -EINVAL status.
fixes:
be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Thu, 26 Apr 2018 12:37:48 +0000 (15:37 +0300)]
RDMA/mlx4: Add missed RSS hash inner header flag
Despite being advertised to user space application, the RSS inner
header flag was filtered by checks at the beginning of QP creation
routine.
Cc: <stable@vger.kernel.org> # 4.15
Fixes:
4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions")
Fixes:
07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:24 +0000 (14:46 +0800)]
RDMA/hns: Fix a couple misspellings
This patch fixes two spelling errors.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:23 +0000 (14:46 +0800)]
RDMA/hns: Submit bad wr
When generated bad work reqeust, it needs to
report to user. This patch mainly fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:22 +0000 (14:46 +0800)]
RDMA/hns: Update assignment method for owner field of send wqe
When posting a work reqeust, it need to update the owner bit of send
wqe. This patch mainly fix the bug when posting multiply work
request.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:21 +0000 (14:46 +0800)]
RDMA/hns: Adjust the order of cleanup hem table
This patch update the order of cleaning hem table for trrl_table and irrl_table
as well as mtt_cqe_table and mtt_table.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:20 +0000 (14:46 +0800)]
RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
Only when the IB_QP_PATH_DEST_QPN flag of attr_mask is set
is it valid to assign the dqpn field of qp context
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:19 +0000 (14:46 +0800)]
RDMA/hns: Remove some unnecessary attr_mask judgement
This patch deletes some unnecessary attr_mask if condition
in hip08 according to the IB protocol.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:18 +0000 (14:46 +0800)]
RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
Only when the IB_QP_PATH_MTU flag of attr_mask is set
it is valid to assign the mtu field of qp context when
qp type is not GSI and UD.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:17 +0000 (14:46 +0800)]
RDMA/hns: Fix the qp context state diagram
According to RoCE protocol, it is possible to
transition from error to error state for modifying
qp in hip08. This patch fix it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:16 +0000 (14:46 +0800)]
RDMA/hns: Intercept illegal RDMA operation when use inline data
RDMA read operation is not supported inline data. If user cofigures
issue a RDMA read and use inline data, it will happen a hardware
error.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Thu, 26 Apr 2018 06:46:15 +0000 (14:46 +0800)]
RDMA/hns: Bugfix for init hem table
During init hem table, type should be used instead of
table->type which is finally initializaed with type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Zhu Yanjun [Thu, 26 Apr 2018 04:41:10 +0000 (00:41 -0400)]
IB/rxe: avoid double kfree_skb
When skb is sent, it will pass the following functions in soft roce.
rxe_send [rdma_rxe]
ip_local_out
__ip_local_out
ip_output
ip_finish_output
ip_finish_output2
dev_queue_xmit
__dev_queue_xmit
dev_hard_start_xmit
In the above functions, if error occurs in the above functions or
iptables rules drop skb after ip_local_out, kfree_skb will be called.
So it is not necessary to call kfree_skb in soft roce module again.
Or else crash will occur.
The steps to reproduce:
server client
--------- ---------
|1.1.1.1|<----rxe-channel--->|1.1.1.2|
--------- ---------
On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512
The kernel configs CONFIG_DEBUG_KMEMLEAK and
CONFIG_DEBUG_OBJECTS are enabled on both server and client.
When rping runs, run the following command in server:
iptables -I OUTPUT -p udp --dport 4791 -j DROP
Without this patch, crash will occur.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jianchao Wang [Thu, 26 Apr 2018 03:52:39 +0000 (11:52 +0800)]
IB/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INV
w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV
will not be updated in update_wqe_psn, and the corresponding
wqe will not be acked in rxe_completer due to its last_psn is
zero. Finally, the other wqe will also not be able to be acked,
because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0
is still there. This causes large amount of io timeout when
nvmeof is over rxe.
Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Wed, 25 Apr 2018 16:24:04 +0000 (17:24 +0100)]
RDMA/iwpm: fix memory leak on map_info
In the cases where iwpm_hash_bucket is NULL and where function
get_mapinfo_hash_bucket returns NULL then the map_info is never added
to hash_bucket_head and hence there is a leak of map_info. Fix this
by nullifying hash_bucket_head and if that is null we know that
that map_info was not added to hash_bucket_head and hence map_info
should be free'd.
Detected by CoverityScan, CID#1222481 ("Resource Leak")
Fixes:
30dc5e63d6a5 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:47 +0000 (15:15 +0200)]
IB/ipoib: fix ipoib_start_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:45 +0000 (15:15 +0200)]
IB/nes: fix nes_netdev_start_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Tue, 24 Apr 2018 17:13:45 +0000 (20:13 +0300)]
RDMA/cma: Fix use after destroy access to net namespace for IPoIB
There are few issues with validation of netdevice and listen id lookup
for IB (IPoIB) while processing incoming CM request as below.
1. While performing lookup of bind_list in cma_ps_find(), net namespace
of the netdevice can get deleted in cma_exit_net(), resulting in use
after free access of idr and/or net namespace structures.
This lookup occurs from the workqueue context (and not userspace
context where net namespace is always valid).
CPU0 CPU1
==== ====
bind_list = cma_ps_find();
move netdevice to new namespace
delete net namespace
cma_exit_net()
idr_destroy(idr);
[..]
cma_find_listener(bind_list, ..);
2. While netdevice is validated for IP address in given net namespace,
netdevice's net namespace and/or ifindex can change in
cma_get_net_dev() and cma_match_net_dev().
Above issues are overcome by using rcu lock along with netdevice
UP/DOWN state as described below.
When a net namespace is getting deleted, netdevice is closed and
shutdown before moving it back to init_net namespace.
change_net_namespace() synchronizes with any existing use of netdevice
before changing the netdev properties such as net or ifindex.
Once netdevice IFF_UP flags is cleared, such fields are not guaranteed
to be valid.
Therefore, rcu lock along with netdevice state check ensures that,
while route lookup and cm_id lookup is in progress, netdevice of
interest won't migrate to any other net namespace.
This ensures that associated net namespace of netdevice won't get
deleted while rcu lock is held for netdevice which is in IFF_UP state.
Fixes:
fa20105e09e9 ("IB/cma: Add support for network namespaces")
Fixes:
4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Fixes:
f887f2ac87c2 ("IB/cma: Validate routing of incoming requests")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Tue, 24 Apr 2018 08:15:20 +0000 (08:15 +0000)]
IB/uverbs: Fix validating mandatory attributes
Previously, if a method contained mandatory attributes in a namespace
that wasn't given by the user, these attributes weren't validated.
Fixing this by iterating over all specification namespaces.
Fixes:
fac9658cabb9 ("IB/core: Add new ioctl interface")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Raju Rangoju [Mon, 23 Apr 2018 16:12:37 +0000 (21:42 +0530)]
RDMA/cxgb4: release hw resources on device removal
The c4iw_rdev_close() logic was not releasing all the hw
resources (PBL and RQT memory) during the device removal
event (driver unload / system reboot). This can cause panic
in gen_pool_destroy().
The module remove function will wait for all the hw
resources to be released during the device removal event.
Fixes
c12a67fe(iw_cxgb4: free EQ queue memory on last deref)
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Thu, 26 Apr 2018 18:19:35 +0000 (11:19 -0700)]
IB: make INFINIBAND_ADDR_TRANS configurable
Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been
finding fair number of CM bugs. So provide option to disable it.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Thu, 26 Apr 2018 18:19:34 +0000 (11:19 -0700)]
ib_srp: depend on INFINIBAND_ADDR_TRANS
INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Thu, 26 Apr 2018 18:19:33 +0000 (11:19 -0700)]
cifs: smbd: depend on INFINIBAND_ADDR_TRANS
CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Thu, 26 Apr 2018 18:19:32 +0000 (11:19 -0700)]
ib_srpt: depend on INFINIBAND_ADDR_TRANS
INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Thu, 26 Apr 2018 18:19:31 +0000 (11:19 -0700)]
nvmet-rdma: depend on INFINIBAND_ADDR_TRANS
NVME_TARGET_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Greg Thelen [Thu, 26 Apr 2018 18:19:30 +0000 (11:19 -0700)]
nvme: depend on INFINIBAND_ADDR_TRANS
NVME_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols. So
declare the kconfig dependency. This is necessary to allow for enabling
INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Mon, 23 Apr 2018 14:01:56 +0000 (17:01 +0300)]
RDMA/mlx5: Properly check return value of mlx5_get_uars_page
Starting from commit
72f36be06138 ("net/mlx5: Fix mlx5_get_uars_page to
return error code") the mlx5_get_uars_page() call returns error in case
of failure, but it was mistakenly overlooked in the merge commit.
Fixes:
e7996a9a77fc ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git")
Reported-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Mon, 23 Apr 2018 14:01:55 +0000 (17:01 +0300)]
IB/mlx5: Fix represent correct netdevice in dual port RoCE
In commit
bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
incorrectly mapped primary device's netdevice to 2nd port netdevice.
It always represented primary port's netdevice for 2nd port netdevice
when ib representors were not used.
This results into failing to process CM request arriving on 2nd port due
to incorrect mapping of netdevice.
This fix corrects it by considering the right mdev.
Cc: <stable@vger.kernel.org> # 4.16
Fixes:
bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Danit Goldberg [Mon, 23 Apr 2018 14:01:54 +0000 (17:01 +0300)]
IB/mlx5: Use unlimited rate when static rate is not supported
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Mon, 23 Apr 2018 14:01:53 +0000 (17:01 +0300)]
RDMA/mlx5: Protect from shift operand overflow
Ensure that user didn't supply values too large that can cause overflow.
UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -
2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:
00007ffc6e62f448 EFLAGS:
00000217 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
00000000004002f8 RCX:
0000000000433569
RDX:
0000000000000070 RSI:
00000000200042c0 RDI:
0000000000000003
RBP:
00000000006d5018 R08:
00000000004002f8 R09:
00000000004002f8
R10:
00000000004002f8 R11:
0000000000000217 R12:
0000000000000000
R13:
000000000040c9f0 R14:
000000000040ca80 R15:
0000000000000006
Cc: <stable@vger.kernel.org> # 3.10
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Mon, 23 Apr 2018 14:01:52 +0000 (17:01 +0300)]
RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow
Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.
Ensure that rereg MR is only performed on a non-dead MR.
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes:
395a8e4c32ea ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Mon, 23 Apr 2018 13:58:19 +0000 (16:58 +0300)]
IB/core: Fix deleting default GIDs when changing mac adddress
Before [1], When MAC address of the netdevice is changed, default GID is
supposed to get deleted and added back which affects the node and/or port
GUID in below sequence.
netdevice_event()
-> NETDEV_CHANGEADDR
default_del_cmd()
del_netdev_default_ips()
bond_delete_netdev_default_gids()
ib_cache_gid_set_default_gid()
ib_cache_gid_del()
add_cmd()
[..]
However, ib_cache_gid_del() was not getting invoked in non bonding
scenarios because event_ndev and rdma_ndev are same.
Therefore, fix such condition to ignore checking upper device when event
ndev and rdma_dev are same; similar to bond_set_netdev_default_gids().
Which this fix ib_cache_gid_del() is invoked correctly; however
ib_cache_gid_del() doesn't find the default GID for deletion because
find_gid() was given default_gid = false with
GID_ATTR_FIND_MASK_DEFAULT set.
But it was getting overwritten by ib_cache_gid_set_default_gid() later
on as part of add_cmd().
Therefore, mac address change used to work for default GID.
With refactor series [1], this incorrect behavior is detected.
Therefore,
when deleting default GID, set default_gid and set MASK flag.
when deleting IP based GID, clear default_gid and set MASK flag.
[1] https://patchwork.kernel.org/patch/
10319151/
Fixes:
238fdf48f2b5 ("IB/core: Add RoCE table bonding support")
Fixes:
598ff6bae689 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Mon, 23 Apr 2018 13:58:18 +0000 (16:58 +0300)]
IB/core: Fix to avoid deleting IPv6 look alike default GIDs
When IPv6 link local address is removed, if it matches with the default
GID, default GID(s)s gets removed which may not be a desired behavior.
This behavior is introduced by refactor work in Fixes tag.
When IPv6 link address is removed, removing its equivalent RoCEv2 GID
which exactly matches with default RoCEv2 GID, is right thing to do.
However achieving it correctly requires lot more changes, likely in
roce_gid_mgmt.c and core/cache.c. This should be done as independent
patch.
Therefore, this patch preserves behavior of not deleteing default GIDs.
This is done by providing explicit hint to consider default GID property
using mask and default_gid; similar to add_gid().
Fixes:
598ff6bae68 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Mon, 23 Apr 2018 13:58:17 +0000 (16:58 +0300)]
IB/core: Don't allow default GID addition at non reseved slots
Default GIDs are marked reserved at the start of the GID table at index
0 and 1 by gid_table_reserve_default(). Currently when default GID is
requested, it can still allocates an empty slot which was not marked as
RESERVED for default GID, which is incorrect.
At least in current code flow of roce_gid_mgmt.c, in theory we can
still request to allocate more than one/two default GIDs depending
on how upper devices are setup.
Therefore, it is better for cache layer to only allow our reserved slots
to be used by default GID allocation requests.
Fixes:
598ff6bae689 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe [Fri, 20 Apr 2018 15:49:10 +0000 (09:49 -0600)]
uapi: Fix SPDX tags for files referring to the 'OpenIB.org' license
Based on discussion with Kate Stewart this license is not a
BSD-2-Clause, but is now formally identified as Linux-OpenIB
by SPDX.
The key difference between the licenses is in the 'warranty'
paragraph.
if_infiniband.h refers to the 'OpenIB.org' license, but
does not include the text, instead it links to an obsolete
web site that contains a license that matches the BSD-2-Clause
SPX. There is no 'three clause' version of the OpenIB.org
license.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Roland Dreier [Thu, 19 Apr 2018 15:28:11 +0000 (08:28 -0700)]
RDMA/ucma: Allow resolving address w/o specifying source address
The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address(). Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command. Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.
Fix this by explicitly allowing a zero address family for the source.
Fixes:
2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe [Thu, 5 Apr 2018 03:00:01 +0000 (21:00 -0600)]
RDMA/ucma: Check for a cm_id->device in all user calls that need it
This is done by auditing all callers of ucma_get_ctx and switching the
ones that unconditionally touch ->device to ucma_get_ctx_dev. This covers
a little less than half of the call sites.
The 11 remaining call sites to ucma_get_ctx() were manually audited.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Geert Uytterhoeven [Mon, 9 Apr 2018 14:52:47 +0000 (16:52 +0200)]
IB/uverbs: Add missing braces in anonymous union initializers
With gcc-4.1.2:
drivers/infiniband/core/uverbs_std_types_flow_action.c:366: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: missing braces around initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>.<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘min_len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: error: unknown field ‘flags’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:376: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: missing braces around initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>.<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:383: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:384: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘min_len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: error: unknown field ‘flags’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
Add the missing braces to fix this.
Fixes:
2eb9beaee5d7 ("IB/uverbs: Add flow_action create and destroy verbs")
Fixes:
7d12f8d5a164 ("IB/uverbs: Add modify ESP flow_action")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Randy Dunlap [Tue, 17 Apr 2018 01:51:50 +0000 (18:51 -0700)]
infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=m
Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y.
The build error occurs when the mlx5 driver code attempts to use
USER_ACCESS interfaces, which are built as a loadable module.
Fixes these build errors:
drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects'
../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree'
drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'
Build-tested with multiple config combinations.
Fixes:
8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc: stable@vger.kernel.org # reported against 4.16
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Zhu Yanjun [Sun, 15 Apr 2018 01:16:54 +0000 (21:16 -0400)]
IB/mlx5: remove duplicate header file
The header file fs_helpers.h is included twice. So it should be removed.
Fixes:
802c2125689d ("IB/mlx5: Add IPsec support for egress and ingress")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Shamir Rabinovitch [Tue, 10 Apr 2018 14:26:23 +0000 (10:26 -0400)]
RDMA/ucma: ucma_context reference leak in error path
Validating input parameters should be done before getting the cm_id
otherwise it can leak a cm_id reference.
Fixes:
6a21dfc0d0db ("RDMA/ucma: Limit possible option size")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Mon, 16 Apr 2018 01:24:20 +0000 (18:24 -0700)]
Linux 4.17-rc1
Linus Torvalds [Mon, 16 Apr 2018 01:08:35 +0000 (18:08 -0700)]
Merge tag 'for-4.17-part2-tag' of git://git./linux/kernel/git/kdave/linux
Pull more btrfs updates from David Sterba:
"We have queued a few more fixes (error handling, log replay,
softlockup) and the rest is SPDX updates that touche almost all files
so the diffstat is long"
* tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Only check first key for committed tree blocks
btrfs: add SPDX header to Kconfig
btrfs: replace GPL boilerplate by SPDX -- sources
btrfs: replace GPL boilerplate by SPDX -- headers
Btrfs: fix loss of prealloc extents past i_size after fsync log replay
Btrfs: clean up resources during umount after trans is aborted
btrfs: Fix possible softlock on single core machines
Btrfs: bail out on error during replay_dir_deletes
Btrfs: fix NULL pointer dereference in log_dir_items
Linus Torvalds [Mon, 16 Apr 2018 01:06:22 +0000 (18:06 -0700)]
Merge tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"SMB3 fixes, a few for stable, and some important cleanup work from
Ronnie of the smb3 transport code"
* tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change validate_buf to validate_iov
cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data()
cifs: Change SMB2_open to return an iov for the error parameter
cifs: add resp_buf_size to the mid_q_entry structure
smb3.11: replace a 4 with server->vals->header_preamble_size
cifs: replace a 4 with server->vals->header_preamble_size
cifs: add pdu_size to the TCP_Server_Info structure
SMB311: Improve checking of negotiate security contexts
SMB3: Fix length checking of SMB3.11 negotiate request
CIFS: add ONCE flag for cifs_dbg type
cifs: Use ULL suffix for 64-bit constant
SMB3: Log at least once if tree connect fails during reconnect
cifs: smb2pdu: Fix potential NULL pointer dereference
Linus Torvalds [Mon, 16 Apr 2018 00:24:12 +0000 (17:24 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of minor (and safe changes) that didn't make the initial
pull request plus some bug fixes.
The status handling code is actually a running regression from the
previous merge window which had an incomplete fix (now reverted) and
most of the remaining bug fixes are for problems older than the
current merge window"
[ Side note: this merge also takes the base kernel git repository to 6+
million objects for the first time. Technically we hit it a couple of
merges ago already if you count all the tag objects, but now it
reaches 6M+ objects reachable from HEAD.
I was joking around that that's when I should switch to 5.0, because
3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But
probably not, even if numerology is about as good a reason as any.
- Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist
scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()
scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl
scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET
scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status()
Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()"
scsi: aacraid: Insure command thread is not recursively stopped
scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
scsi: qla2xxx: correctly shift host byte
scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
scsi: qla2xxx: Avoid double completion of abort command
scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
scsi: scsi_dh: Don't look for NULL devices handlers by name
scsi: core: remove redundant assignment to shost->use_blk_mq
Linus Torvalds [Mon, 16 Apr 2018 00:21:30 +0000 (17:21 -0700)]
Merge tag 'kbuild-v4.17-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
Linus Torvalds [Sun, 15 Apr 2018 23:12:35 +0000 (16:12 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
Linus Torvalds [Sun, 15 Apr 2018 20:35:29 +0000 (13:35 -0700)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner:
"Another series of PTI related changes:
- Remove the manual stack switch for user entries from the idtentry
code. This debloats entry by 5k+ bytes of text.
- Use the proper types for the asm/bootparam.h defines to prevent
user space compile errors.
- Use PAGE_GLOBAL for !PCID systems to gain back performance
- Prevent setting of huge PUD/PMD entries when the entries are not
leaf entries otherwise the entries to which the PUD/PMD points to
and are populated get lost"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
x86/pti: Leave kernel text global for !PCID
x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image
x86/pti: Enable global pages for shared areas
x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init
x86/mm: Comment _PAGE_GLOBAL mystery
x86/mm: Remove extra filtering in pageattr code
x86/mm: Do not auto-massage page protections
x86/espfix: Document use of _PAGE_GLOBAL
x86/mm: Introduce "default" kernel PTE mask
x86/mm: Undo double _PAGE_PSE clearing
x86/mm: Factor out pageattr _PAGE_GLOBAL setting
x86/entry/64: Drop idtentry's manual stack switch for user entries
x86/uapi: Fix asm/bootparam.h userspace compilation errors
Linus Torvalds [Sun, 15 Apr 2018 19:43:30 +0000 (12:43 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A few scheduler fixes:
- Prevent a bogus warning vs. runqueue clock update flags in
do_sched_rt_period_timer()
- Simplify the helper functions which handle requests for skipping
the runqueue clock updat.
- Do not unlock the tunables mutex in the error path of the cpu
frequency scheduler utils. Its not held.
- Enforce proper alignement for 'struct util_est' in sched_avg to
prevent a misalignment fault on IA64"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Force proper alignment of 'struct util_est'
sched/core: Simplify helpers for rq clock update skip requests
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
sched/cpufreq/schedutil: Fix error path mutex unlock
Linus Torvalds [Sun, 15 Apr 2018 19:36:31 +0000 (12:36 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
"A rather large set of perf updates:
Kernel:
- Fix various initialization issues
- Prevent creating [ku]probes for not CAP_SYS_ADMIN users
Tooling:
- Show only failing syscalls with 'perf trace --failure' (Arnaldo
Carvalho de Melo)
e.g: See what 'openat' syscalls are failing:
# perf trace --failure -e openat
762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
<SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
^C#
- Show information about the event (freq, nr_samples, total
period/nr_events) in the annotate --tui and --stdio2 'perf
annotate' output, similar to the first line in the 'perf report
--tui', but just for the samples for a the annotated symbol
(Arnaldo Carvalho de Melo)
- Introduce 'perf version --build-options' to show what features were
linked, aliased as well as a shorter 'perf -vv' (Jin Yao)
- Add a "dso_size" sort order (Kim Phillips)
- Remove redundant ')' in the tracepoint output in 'perf trace'
(Changbin Du)
- Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo
Carvalho de Melo)
- Show group details on the title line in the annotate browser and
'perf annotate --stdio2' output, so that the per-event columns can
have headers (Arnaldo Carvalho de Melo)
- Fixup vertical line separating metrics from instructions and
cleaning unused lines at the bottom, both in the annotate TUI
browser (Arnaldo Carvalho de Melo)
- Remove duplicated 'samples' in lost samples warning in
'perf report' (Arnaldo Carvalho de Melo)
- Synchronize i915_drm.h, silencing the perf build process,
automagically adding support for the new DRM_I915_QUERY ioctl
(Arnaldo Carvalho de Melo)
- Make auxtrace_queues__add_buffer() allocate struct buffer, from a
patchkit already applied (Adrian Hunter)
- Fix the --stdio2/TUI annotate output to include group details, be
it for a recorded '{a,b,f}' explicit event group or when forcing
group display using 'perf report --group' for a set of events not
recorded as a group (Arnaldo Carvalho de Melo)
- Fix display artifacts in the ui browser (base class for the
annotate and main report/top TUI browser) related to the extra
title lines work (Arnaldo Carvalho de Melo)
- perf auxtrace refactorings, leftovers from a previously partially
processed patchset (Adrian Hunter)
- Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de
Melo)
- Synchronize i915_drm.h, silencing a perf build warning and in the
process automagically adding support for a new ioctl command
(Arnaldo Carvalho de Melo)
- Fix a strncpy issue in uprobe tracing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()
tracing/uprobe_event: Fix strncpy corner case
perf/core: Fix perf_uprobe_init()
perf/core: Fix perf_kprobe_init()
perf/core: Fix use-after-free in uprobe_perf_close()
perf tests clang: Fix function name for clang IR test
perf clang: Add support for recent clang versions
perf tools: Fix perf builds with clang support
perf tools: No need to include namespaces.h in util.h
perf hists browser: Remove leftover from row returned from refresh
perf hists browser: Show extra_title_lines in the 'D' debug hotkey
perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering
tools headers uapi: Synchronize i915_drm.h
perf report: Remove duplicated 'samples' in lost samples warning
perf ui browser: Fixup cleaning unused lines at the bottom
perf annotate browser: Fixup vertical line separating metrics from instructions
perf annotate: Show group details on the title line
perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer
perf/x86/intel: Move regs->flags EXACT bit init
perf trace: Remove redundant ')'
...
Linus Torvalds [Sun, 15 Apr 2018 19:32:06 +0000 (12:32 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 EFI bootup fixlet from Thomas Gleixner:
"A single fix for an early boot warning caused by invoking
this_cpu_has() before SMP initialization"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()
Linus Torvalds [Sun, 15 Apr 2018 19:29:46 +0000 (12:29 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq affinity fixes from Thomas Gleixner:
- Fix error path handling in the affinity spreading code
- Make affinity spreading smarter to avoid issues on systems which
claim to have hotpluggable CPUs while in fact they can't hotplug
anything.
So instead of trying to spread the vectors (and thereby the
associated device queues) to all possibe CPUs, spread them on all
present CPUs first. If there are left over vectors after that first
step they are spread among the possible, but not present CPUs which
keeps the code backwards compatible for virtual decives and NVME
which allocate a queue per possible CPU, but makes the spreading
smarter for devices which have less queues than possible or present
CPUs.
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Spread irq vectors among present CPUs as far as possible
genirq/affinity: Allow irq spreading from a given starting point
genirq/affinity: Move actual irq vector spreading into a helper function
genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask
genirq/affinity: Don't return with empty affinity masks on error
Linus Torvalds [Sun, 15 Apr 2018 19:27:58 +0000 (12:27 -0700)]
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fixlet from Stafford Horne:
"Just one small thing here, it came in a while back but I didnt have
anything in my 4.16 queue, still its the only thing for 4.17 so
sending it alone.
Small cleanup: remove unused __ARCH_HAVE_MMU define"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: remove unused __ARCH_HAVE_MMU define
Linus Torvalds [Sun, 15 Apr 2018 18:57:12 +0000 (11:57 -0700)]
Merge tag 'powerpc-4.17-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when loading modules built with a different
CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic.
- Fix busy loops in the OPAL NVRAM driver if we get certain error
conditions from firmware.
- Remove tlbie trace points from KVM code that's called in real mode,
because it causes crashes.
- Fix checkstops caused by invalid tlbiel on Power9 Radix.
- Ensure the set of CPU features we "know" are always enabled is
actually the minimal set when we build with support for firmware
supplied CPU features.
Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin.
* tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features
powerpc/mm/radix: Fix checkstops caused by invalid tlbiel
KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode
powerpc/8xx: Fix build with hugetlbfs enabled
powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops
powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
powerpc/fscr: Enable interrupts earlier before calling get_user()
powerpc/64s: Fix section mismatch warnings from setup_rfi_flush()
powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic
Linus Torvalds [Sat, 14 Apr 2018 15:50:50 +0000 (08:50 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
- various hotfixes
- kexec_file updates and feature work
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits)
kernel/kexec_file.c: move purgatories sha256 to common code
kernel/kexec_file.c: allow archs to set purgatory load address
kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load
kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs
kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs
kernel/kexec_file.c: split up __kexec_load_puragory
kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations*
kernel/kexec_file.c: search symbols in read-only kexec_purgatory
kernel/kexec_file.c: make purgatory_info->ehdr const
kernel/kexec_file.c: remove checks in kexec_purgatory_load
include/linux/kexec.h: silence compile warnings
kexec_file, x86: move re-factored code to generic side
x86: kexec_file: clean up prepare_elf64_headers()
x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer
x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers()
x86: kexec_file: purge system-ram walking from prepare_elf64_headers()
kexec_file,x86,powerpc: factor out kexec_file_ops functions
kexec_file: make use of purgatory optional
proc: revalidate misc dentries
mm, slab: reschedule cache_reap() on the same CPU
...
Philipp Rudo [Fri, 13 Apr 2018 22:36:46 +0000 (15:36 -0700)]
kernel/kexec_file.c: move purgatories sha256 to common code
The code to verify the new kernels sha digest is applicable for all
architectures. Move it to common code.
One problem is the string.c implementation on x86. Currently sha256
includes x86/boot/string.h which defines memcpy and memset to be gcc
builtins. By moving the sha256 implementation to common code and
changing the include to linux/string.h both functions are no longer
defined. Thus definitions have to be provided in x86/purgatory/string.c
Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:43 +0000 (15:36 -0700)]
kernel/kexec_file.c: allow archs to set purgatory load address
For s390 new kernels are loaded to fixed addresses in memory before they
are booted. With the current code this is a problem as it assumes the
kernel will be loaded to an 'arbitrary' address. In particular,
kexec_locate_mem_hole searches for a large enough memory region and sets
the load address (kexec_bufer->mem) to it.
Luckily there is a simple workaround for this problem. By returning 1
in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This
allows the architecture to set kbuf->mem by hand. While the trick works
fine for the kernel it does not for the purgatory as here the
architectures don't have access to its kexec_buffer.
Give architectures access to the purgatories kexec_buffer by changing
kexec_load_purgatory to take a pointer to it. With this change
architectures have access to the buffer and can edit it as they need.
A nice side effect of this change is that we can get rid of the
purgatory_info->purgatory_load_address field. As now the information
stored there can directly be accessed from kbuf->mem.
Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:39 +0000 (15:36 -0700)]
kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load
The current code uses the sh_offset field in purgatory_info->sechdrs to
store a pointer to the current load address of the section. Depending
whether the section will be loaded or not this is either a pointer into
purgatory_info->purgatory_buf or kexec_purgatory. This is not only a
violation of the ELF standard but also makes the code very hard to
understand as you cannot tell if the memory you are using is read-only
or not.
Remove this misuse and store the offset of the section in
pugaroty_info->purgatory_buf in sh_offset.
Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:35 +0000 (15:36 -0700)]
kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs
The main loop currently uses quite a lot of variables to update the
section headers. Some of them are unnecessary. So clean them up a
little.
Link: http://lkml.kernel.org/r/20180321112751.22196-9-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:32 +0000 (15:36 -0700)]
kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs
To update the entry point there is an extra loop over all section
headers although this can be done in the main loop. So move it there
and eliminate the extra loop and variable to store the 'entry section
index'.
Also, in the main loop, move the usual case, i.e. non-bss section, out
of the extra if-block.
Link: http://lkml.kernel.org/r/20180321112751.22196-8-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:28 +0000 (15:36 -0700)]
kernel/kexec_file.c: split up __kexec_load_puragory
When inspecting __kexec_load_purgatory you find that it has two tasks
1) setting up the kexec_buffer for the new kernel and,
2) setting up pi->sechdrs for the final load address.
The two tasks are independent of each other. To improve readability
split up __kexec_load_purgatory into two functions, one for each task,
and call them directly from kexec_load_purgatory.
Link: http://lkml.kernel.org/r/20180321112751.22196-7-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:24 +0000 (15:36 -0700)]
kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations*
When the relocations are applied to the purgatory only the section the
relocations are applied to is writable. The other sections, i.e. the
symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this
by marking the corresponding variables as 'const'.
While at it also change the signatures of arch_kexec_apply_relocations* to
take section pointers instead of just the index of the relocation section.
This removes the second lookup and sanity check of the sections in arch
code.
Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:21 +0000 (15:36 -0700)]
kernel/kexec_file.c: search symbols in read-only kexec_purgatory
The stripped purgatory does not contain a symtab. So when looking for
symbols this is done in read-only kexec_purgatory. Highlight this by
marking the corresponding variables as 'const'.
Link: http://lkml.kernel.org/r/20180321112751.22196-5-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:17 +0000 (15:36 -0700)]
kernel/kexec_file.c: make purgatory_info->ehdr const
The kexec_purgatory buffer is read-only. Thus all pointers into
kexec_purgatory are read-only, too. Point this out by explicitly
marking purgatory_info->ehdr as 'const' and update the comments in
purgatory_info.
Link: http://lkml.kernel.org/r/20180321112751.22196-4-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:13 +0000 (15:36 -0700)]
kernel/kexec_file.c: remove checks in kexec_purgatory_load
Before the purgatory is loaded several checks are done whether the ELF
file in kexec_purgatory is valid or not. These checks are incomplete.
For example they don't check for the total size of the sections defined
in the section header table or if the entry point actually points into
the purgatory.
On the other hand the purgatory, although an ELF file on its own, is
part of the kernel. Thus not trusting the purgatory means not trusting
the kernel build itself.
So remove all validity checks on the purgatory and just trust the kernel
build.
Link: http://lkml.kernel.org/r/20180321112751.22196-3-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Fri, 13 Apr 2018 22:36:10 +0000 (15:36 -0700)]
include/linux/kexec.h: silence compile warnings
Patch series "kexec_file: Clean up purgatory load", v2.
Following the discussion with Dave and AKASHI, here are the common code
patches extracted from my recent patch set (Add kexec_file_load support
to s390) [1]. The patches were extracted to allow upstream integration
together with AKASHI's common code patches before the arch code gets
adjusted to the new base.
The reason for this series is to prepare common code for adding
kexec_file_load to s390 as well as cleaning up the mis-use of the
sh_offset field during purgatory load. In detail this series contains:
Patch #1&2: Minor cleanups/fixes.
Patch #3-9: Clean up the purgatory load/relocation code. Especially
remove the mis-use of the purgatory_info->sechdrs->sh_offset field,
currently holding a pointer into either kexec_purgatory (ro) or
purgatory_buf (rw) depending on the section. With these patches the
section address will be calculated verbosely and sh_offset will contain
the offset of the section in the stripped purgatory binary
(purgatory_buf).
Patch #10: Allows architectures to set the purgatory load address. This
patch is important for s390 as the kernel and purgatory have to be
loaded to fixed addresses. In current code this is impossible as the
purgatory load is opaque to the architecture.
Patch #11: Moves x86 purgatories sha implementation to common lib/
directory to allow reuse in other architectures.
This patch (of 11)
When building the kernel with CONFIG_KEXEC_FILE enabled gcc prints a
compile warning multiple times.
In file included from <path>/linux/init/initramfs.c:526:0:
<path>/include/linux/kexec.h:120:9: warning: `struct kimage' declared inside parameter list [enabled by default]
unsigned long cmdline_len);
^
This is because the typedefs for kexec_file_load uses struct kimage
before it is declared. Fix this by simply forward declaring struct
kimage.
Link: http://lkml.kernel.org/r/20180321112751.22196-2-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / platform / kernel / linux-starfive.git / log