Hans Verkuil [Sat, 21 Jun 2008 14:19:34 +0000 (11:19 -0300)]
V4L/DVB (8091): cx18: show GPIO pins when VIDIOC_LOG_STATUS is called.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Ian Armstrong [Sat, 21 Jun 2008 14:09:46 +0000 (11:09 -0300)]
V4L/DVB (8090): ivtv: yuv decoder lock fix (2)
The IVTV_IOC_DMA_FRAME ioctl fails to correctly 'start' the decoder. Although
yuv output will be correct, some functions which should be disabled while the
decoder is in use remain enabled. This can result in hardware registers being
corrupted, causing problems with the mpeg decoder. This patch ensures the
decoder 'start' sequence is called, disabling these functions until the
device is closed.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Sri Deevi [Sat, 21 Jun 2008 14:06:44 +0000 (11:06 -0300)]
V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM card
Patch provided courtesy of Conexant http://www.conexant.com.
Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Ian Armstrong [Sat, 21 Jun 2008 12:25:23 +0000 (09:25 -0300)]
V4L/DVB (8088): ivtv: yuv decoder lock fix
write() operations to the yuv device may not always 'start' the decoder.
Although yuv output will be correct, some functions which should be disabled
while the decoder is in use remain enabled. This can result in hardware
registers being corrupted, causing problems with the mpeg decoder. This patch
simply moves the existing decoder 'start' sequence to earlier in the write()
handler.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 12:22:19 +0000 (09:22 -0300)]
V4L/DVB (8087): cx18: make sure all v4l2_format fields are filled in
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 12:21:23 +0000 (09:21 -0300)]
V4L/DVB (8086): ivtv/cx18: fix video_temporal_filter handling
If the capture is scaled, then the video_temporal_filter is set to 0
by the cx2341x.c module since otherwise you would get ghosting.
However, this was also done in the VIDIOC_S_FMT ioctl which meant that
the video_temporal_filter control was reset to 0 or 8 each time S_FMT
was called. This was old code that should have been removed a long time
ago.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 12:06:59 +0000 (09:06 -0300)]
V4L/DVB (8085): ivtv: fill in all v4l2_framebuffer fields in VIDIOC_G/S_FBUF
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 12:02:36 +0000 (09:02 -0300)]
V4L/DVB (8084): ivtv/cx18: remove unnecessary memsets & KERNEL_VERSION tests
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 11:57:42 +0000 (08:57 -0300)]
V4L/DVB (8083): videodev: zero fields for ENCODER_CMD and VIDIOC_G_SLICED_VBI_CAP
This avoids the need of memsets in the ivtv/cx18 drivers.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andy Walls [Sat, 21 Jun 2008 11:36:31 +0000 (08:36 -0300)]
V4L/DVB (8082): cx18: convert to video_ioctl2()
cx18: convert driver to use video_ioctl2(). Pushed down ioctl debug
messages and priority checks as well. Still left serialization lock in
place for now. #if 0'ed out sliced vbi ioctl code for now.
Patch heavily based on similar changes made to ivtv by Hans Verkuil.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 11:15:37 +0000 (08:15 -0300)]
V4L/DVB (8081): ivtv: remove obsolete arrays.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sat, 21 Jun 2008 11:00:56 +0000 (08:00 -0300)]
V4L/DVB (8080): ivtv: make sure all v4l2_format fields are filled in
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Thu, 29 May 2008 19:43:54 +0000 (16:43 -0300)]
V4L/DVB (8079): ivtv: Convert to video_ioctl2.
Based on an initial conversion patch from Douglas Landgraf.
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
brandon@ifup.org [Sat, 21 Jun 2008 01:58:53 +0000 (22:58 -0300)]
V4L/DVB (8078): Introduce "index" attribute for persistent video4linux device nodes
A number of V4L drivers have a mod param to specify their preferred minors.
This is because it is often desirable for applications to have a static /dev
name for a particular device. However, using minors has several disadvantages:
1) the requested minor may already be taken
2) using a mod param is driver specific
3) it requires every driver to add a param
4) requires configuration by hand
This patch introduces an "index" attribute that when combined with udev rules
can create static device paths like this:
/dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video0
/dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video1
/dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video2
$ ls -la /dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video0
lrwxrwxrwx 1 root root 12 2008-04-28 00:02 /dev/v4l/by-path/pci-0000:00:1d.2-usb-0:1:1.0-video0 -> ../../video1
These paths are steady across reboots and should be resistant to rearranging
across Kernel versions.
video_register_device_index is available to drivers to request a
specific index number.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Kees Cook <kees@outflux.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Fri, 20 Jun 2008 02:36:45 +0000 (23:36 -0300)]
V4L/DVB (8076): budget-ci: Support the bundled remote control of the TT DVB-C 1501
Support the bundled remote control of the TT DVB-C 1501
Thanks-to: SG <SiestaGomez@web.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Fri, 20 Jun 2008 01:56:03 +0000 (22:56 -0300)]
V4L/DVB (8072): av7110: Removed some obsolete definitions and one unused variable
Removed some obsolete definitions and one unused variable.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Wed, 18 Jun 2008 19:23:52 +0000 (16:23 -0300)]
V4L/DVB (8065): Add missing selects at dvb-usb/Kconfig
Add missing auto-selects for MEDIA_TUNER_XC2028 and DVB_TDA1004X at
dvb-usb/Kconfig.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Tue, 17 Jun 2008 18:32:08 +0000 (15:32 -0300)]
V4L/DVB (8060): Kconfig: MEDIA_TUNER_CUSTOMIZE should be disabled by default
The build option, MEDIA_TUNER_CUSTOMIZE, allows us to disable tuner drivers
that would have otherwise been selected by default. This is an advanced
customization option that should be disabled by default.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Wed, 18 Jun 2008 12:27:21 +0000 (09:27 -0300)]
V4L/DVB (8059): Add missing select for MEDIA_TUNER_TDA827X
$ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \;
linux/drivers/media/dvb/dvb-usb/m920x.c
linux/drivers/media/dvb/ttpci/budget-ci.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Mon, 16 Jun 2008 15:35:06 +0000 (12:35 -0300)]
V4L/DVB (8051): ttpci/Kconfig: Technotrend budget C-1501 needs tda10023
Auto-selects tda10023, for budget-ci, if !DVB_FE_CUSTOMISE. This is needed for
Technotrend budget C-1501 dvb board.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Mon, 16 Jun 2008 15:31:57 +0000 (12:31 -0300)]
V4L/DVB (8050): Add register get/set debug ioctls to saa7134
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Sigmund Augdal [Sun, 15 Jun 2008 20:25:46 +0000 (17:25 -0300)]
V4L/DVB (8049): budget-ci: Add support for Technotrend budget C-1501 dvb-c card
The following experimental patch adds support for the technotrend budget
C-1501 dvb-c card. The parameters used to configure the tda10023 demod
chip are largely determined experimentally, but works quite for me in my
initial tests.
Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Jean Delvare [Sun, 15 Jun 2008 15:20:18 +0000 (12:20 -0300)]
V4L/DVB (8047): bt8xx: i2c structure templates clean-up
Clean up the use of structure templates in bttv-i2c. For one thing, a
real template is supposed to be read-only. And in some cases it's more
efficient to initialize the few fields we need individually.
This clean-up shrinks bttv-i2c.o by 29% (x86_64).
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Jean Delvare [Thu, 12 Jun 2008 16:20:46 +0000 (13:20 -0300)]
V4L/DVB (8046): zoran: i2c structure templates clean-up
Clean up the use of structure templates in zoran_card. For one thing,
a real template is supposed to be read-only. And in some cases it's
more efficient to initialize the few fields we need individually.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Wed, 11 Jun 2008 14:43:19 +0000 (11:43 -0300)]
V4L/DVB (8032): Anysee: fix Kconfig
- select DVB_PLL
- fix typos in comments
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Tue, 10 Jun 2008 01:58:22 +0000 (22:58 -0300)]
V4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4
- support for Anysee E30C Plus rev 0.4
- set IO port E
- set correct TS mode
- change deltaf according to latest Windows driver
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Tue, 10 Jun 2008 01:53:04 +0000 (22:53 -0300)]
V4L/DVB (8030): TDA10023: make TS output mode configurable
- make TS output mode configurable
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 10 Jun 2008 18:21:49 +0000 (15:21 -0300)]
V4L/DVB (8024): vivi: rename MODULE_NAME macro to VIVI_MODULE_NAME to avoid namespace conflicts
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Carl Karsten [Tue, 10 Jun 2008 03:02:32 +0000 (00:02 -0300)]
V4L/DVB (8023): vivi: announce that it is registered as /dev/video%d
Signed-off-by: Carl Karsten <carl@personnelware.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitry Belimov [Tue, 10 Jun 2008 17:22:00 +0000 (14:22 -0300)]
V4L/DVB (8021): Beholder's cards description
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63
has chip with AC3 codec, M6 Extra has other type of HF module.
Add correct data for support MPEG encoder.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitry Belimov [Tue, 10 Jun 2008 15:43:58 +0000 (12:43 -0300)]
V4L/DVB (8019): New for I2S on for MPEG of saa7134_empress
Rework saa7134_enable_i2s function. Remove vendor specific data.
Configure I2S output port specific for model of SAA7133/5-SAA7134.
I think it is more good.
Renamed definition of I2S audio output control register. It`s SAA7133/5 register
Start video port after configuring procedure.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Thu, 29 May 2008 01:16:31 +0000 (22:16 -0300)]
V4L/DVB (8014): gl861: coding style fixes
- coding style fixes raised by checkpatch
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Sun, 8 Jun 2008 13:22:03 +0000 (10:22 -0300)]
V4L/DVB (8006): em28xx: Split HVR900 into two separate entries
- Separate the newer variant of the HVR-900 into its own device profile
because it has a Micronas DRX397 instead of the Zarlink demod. This
doesn't make the device work, but at least we don't try to initialize it
as though it had the Zarlink device.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
[mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tobias Lorenz [Sat, 31 May 2008 18:11:32 +0000 (15:11 -0300)]
V4L/DVB (7997): si470x: hardware frequency seek support
This patch brings the following changes:
- this now finally adds hardware frequency seek support
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tobias Lorenz [Sat, 31 May 2008 18:09:07 +0000 (15:09 -0300)]
V4L/DVB (7996): si470x: afc indication
This patch brings the following changes:
- afc indication:
device has no indication whether freq is too low or too high
therefore afc always return 1, when freq is wrong
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tobias Lorenz [Sat, 31 May 2008 18:07:52 +0000 (15:07 -0300)]
V4L/DVB (7995): si470x: a lot of small code cleanups
This patch brings the following changes:
- comment on how to listen to an usb audio device
(i get so many questions about that...)
- code cleanup (error handling, more warnings, spacing, ...)
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tobias Lorenz [Sat, 31 May 2008 18:06:50 +0000 (15:06 -0300)]
V4L/DVB (7994): si470x: let si470x_get_freq return errno
This patch brings the following changes:
- version bumped to 1.0.8 for all the following patches
- si470x_get_freq now returns errno
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tobias Lorenz [Sat, 31 May 2008 18:04:32 +0000 (15:04 -0300)]
V4L/DVB (7993): si470x: move global lock to device structure
this patch brings the following changes:
- move the global disconnect lock into the device structure
- code cleanup (spaces to tabs, long line splits, ...)
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Wed, 4 Jun 2008 16:43:46 +0000 (13:43 -0300)]
V4L/DVB (7992): Add support for Pinnacle PCTV HD Pro stick (the older variant 2304:0227)
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sun, 1 Jun 2008 13:35:18 +0000 (10:35 -0300)]
V4L/DVB (7988): soc_camera: missed fmt callback conversion.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Wed, 7 May 2008 04:43:10 +0000 (01:43 -0300)]
V4L/DVB (7986): cx23885: add initial support for DViCO FusionHDTV7 Dual Express
Only one frontend is enabled right now. The second frontend can lock,
but transport doesn't work yet. The device will be supported as a
single tuner device until the second frontend is working.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Tue, 3 Jun 2008 08:16:37 +0000 (05:16 -0300)]
V4L/DVB (7984): tda18271: update filename in comments
This file was renamed but we forgot to change it in the comments.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitri Belimov [Wed, 21 May 2008 06:16:52 +0000 (03:16 -0300)]
V4L/DVB (7976): I2S on for MPEG of saa7134_empress
Rework saa7134_enable_i2s function. Add vendor specific data.
Add definition for I2S audio output control register.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Wed, 28 May 2008 06:57:39 +0000 (03:57 -0300)]
V4L/DVB (7952): AU6610: various cosmetic changes
- update license comments
- change MODULE_DESCRIPTION from device specific to chipset specific
- correct debug switch from deb_rc to deb_info
- correct MPEG2 stream interval from 1.25 to 1
- change frontend_attach error code from -EIO to -ENODEV
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Wed, 28 May 2008 04:01:04 +0000 (01:01 -0300)]
V4L/DVB (7951): AU6610: remove useless identify_state
- remove useless identify_state - device is always warm
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Wed, 28 May 2008 03:53:27 +0000 (00:53 -0300)]
V4L/DVB (7950): AU6610: coding style fixes
- coding style fixes raised by checkpatch
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Wed, 28 May 2008 15:16:41 +0000 (12:16 -0300)]
V4L/DVB (7949): videodev: renamed the vidioc_*_fmt_* callbacks
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and
VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match
the v4l2_buf_type name.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Wed, 28 May 2008 01:31:43 +0000 (22:31 -0300)]
V4L/DVB (7948): videodev: add missing vidioc_try_fmt_sliced_vbi_output and VIDIOC_ENUMOUTPUT handling
There was no vidioc_try_fmt_sliced_vbi_output, instead vidioc_try_fmt_vbi_output
was reused.
The VIDIOC_ENUMOUTPUT handling was missing altogether, even though the callback
existed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Wed, 28 May 2008 11:27:00 +0000 (08:27 -0300)]
V4L/DVB (7947): videodev: add vidioc_g_std callback.
The default videodev behavior for VIDIOC_G_STD is not correct for all devices.
Add a new callback that drivers can use instead.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Wed, 28 May 2008 00:32:08 +0000 (21:32 -0300)]
V4L/DVB (7946): videodev: small fixes for VIDIOC_G_FREQUENCY and VIDIOC_G_FMT
__video_do_ioctl incorrectly zeroed the tuner field of v4l2_frequency and
did not zero the full fmt union of v4l2_format.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tobias Lorenz [Mon, 26 May 2008 21:40:46 +0000 (18:40 -0300)]
V4L/DVB (7942): Hardware frequency seek ioctl interface
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 26 May 2008 09:00:47 +0000 (06:00 -0300)]
V4L/DVB (7939): pvrusb2: Remove sysfs interface hackery
Back in the early days of the pvrusb2 driver, the kernel class
mechanism in use for the sysfs interface had no means to pass
per-attribute information to the show / store functions. This forced
me to implement a horrible ugly thunking mechanism (i.e. infer the
missing data through the use of dedicated cookie cutter bounce
functions). However now we're using a better mechanism which also
passes enough additional information to the show / store functions
that we no longer need the hack. So eliminate all the crap. Yay!
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 26 May 2008 08:54:24 +0000 (05:54 -0300)]
V4L/DVB (7938): pvrusb2: Increase enforced encoder wait delay to improve reliability
The driver enforces a "quiet period" on the encoder in certain
situations before attempting to operate it. This seems to help avoid
video encoding errors / corruption. The quiet period was 50msec, but
through experimentation it has been observed to improve further if the
interval is increased to 100msec.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 26 May 2008 08:51:57 +0000 (05:51 -0300)]
V4L/DVB (7937): pvrusb2: Change several embedded timer constants to defined values
This is primarily a cosmetic change to make it easier to change some
of the time constants used in the driver.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sun, 25 May 2008 20:08:13 +0000 (17:08 -0300)]
V4L/DVB (7936): pvrusb2: Remove svn Id keyword from all sources
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Tue, 20 May 2008 09:24:04 +0000 (06:24 -0300)]
V4L/DVB (7927): ivtv: simplify gpio initialization for XCeive tuners.
Separate gpio_init field and xceive_pin and combine the two when
the gpio is initialized. So there is no longer any need to set the
xceive pin in the gpio_init values, simplifying the creation of a
new card definition.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Tue, 20 May 2008 09:19:47 +0000 (06:19 -0300)]
V4L/DVB (7926): ivtv: add support for the Buffalo PC-MV5L/PCI card.
Thanks to Peter Brandt for doing the necessary tests to fill out the card
definition!
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Jean Delvare [Tue, 13 May 2008 21:27:15 +0000 (18:27 -0300)]
V4L/DVB (7924): ivtv/cx18: snprintf fixes
snprinf() takes the trailing \0 into account in its length calculations,
so there is no need to subtract 1 to the buffer size.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 25 May 2008 16:28:46 +0000 (13:28 -0300)]
V4L/DVB (7921): s5h1411.c shouldn't #include "dvb-pll.h"
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 25 May 2008 16:27:57 +0000 (13:27 -0300)]
V4L/DVB (7920): s5h1409.c shouldn't #include "dvb-pll.h"
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 25 May 2008 03:25:08 +0000 (00:25 -0300)]
V4L/DVB (7917): au8522.c shouldn't #include "dvb-pll.h"
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Sun, 18 May 2008 02:05:48 +0000 (23:05 -0300)]
V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiver
- driver for Anysee DVB-T/C receiver
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Sun, 18 May 2008 02:02:00 +0000 (23:02 -0300)]
V4L/DVB (7913): DVB-PLL: add Samsung DTOS403IH102A tuner
- add Samsung DTOS403IH102A tuner
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Antti Palosaari [Sun, 18 May 2008 01:58:04 +0000 (22:58 -0300)]
V4L/DVB (7912): TDA10023: make few parameters configurable
- separate TDA10021 and TDA10023 attach
- configurable Xtal settings
- configurable input freq offset + baseband conversion type settings
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Sakari Ailus [Tue, 13 May 2008 12:21:06 +0000 (09:21 -0300)]
V4L/DVB (7897): TCM825x: Include invertation of image mirroring in configuration
Add invertation of image mirroring register bits to default
configuration.
This is useful when the camera module is e.g. mounted upside down.
Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Ian Armstrong [Mon, 12 May 2008 14:53:10 +0000 (11:53 -0300)]
V4L/DVB (7886): ivtvfb: Use DMA for write()
write() operations to the ivtv framebuffer will now attempt to use DMA if the
amount of data to copy is >= 4096 bytes. This change effectively depreciates
the need for the proprietary IVTVFB_IOC_DMA_FRAME ioctl since a write() of
sufficient size will do the same thing.
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 11 May 2008 19:37:50 +0000 (16:37 -0300)]
V4L/DVB (7883): pvrusb2: make default frequency configurable via modprobe option
The pvrusb2 driver initially sets the tuner to known broadcast frequencies
in the Chicago area, to ease driver testing for the maintainer.
This patch keeps those default frequencies, but allows them to be altered
via modprobe option. This allows the same ease and convenience for testing
multiple pvrusb2 devices one after another under other conditions and areas.
For instance, the default initial frequency, 175.25 MHz, might not
necessarily be valid on all cable television networks, but usually will be a
valid NTSC broadcast channel.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Adrian Bunk [Sat, 10 May 2008 07:35:24 +0000 (04:35 -0300)]
V4L/DVB (7882): pvrusb2: make code static
This patch makes the following needlessly global code static:
- pvrusb2-devattr.c: struct pvr2_onair_creator_fe_props
- pvrusb2-devattr.c: struct pvr2_onair_usb2_fe_props
- pvrusb2-devattr.c: struct pvr2_73xxx_dvb_props
- pvrusb2-devattr.c: struct pvr2_750xx_dvb_props
- pvrusb2-devattr.c: struct pvr2_751xx_dvb_props
- pvrusb2-hdw.c:pvr2_led_ctrl_hauppauge()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 16 Apr 2008 01:22:11 +0000 (22:22 -0300)]
V4L/DVB (7586): radio: use get/put_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Linus Torvalds [Thu, 17 Jul 2008 17:55:51 +0000 (10:55 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: fix oops in mmap_truncate testing
configfs: call drop_link() to cleanup after create_link() failure
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
configfs: Fix failing mkdir() making racing rmdir() fail
configfs: Fix deadlock with racing rmdir() and rename()
configfs: Make configfs_new_dirent() return error code instead of NULL
configfs: Protect configfs_dirent s_links list mutations
configfs: Introduce configfs_dirent_lock
ocfs2: Don't snprintf() without a format.
ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
ocfs2/net: Silence build warnings on sparc64
ocfs2: Handle error during journal load
ocfs2: Silence an error message in ocfs2_file_aio_read()
ocfs2: use simple_read_from_buffer()
ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
[PATCH 2/2] ocfs2: Instrument fs cluster locks
[PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
Linus Torvalds [Thu, 17 Jul 2008 17:55:07 +0000 (10:55 -0700)]
Merge git://git./linux/kernel/git/brodo/pcmcia-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
pcmcia: ide-cs: Remove outdated comment
pcmcia: fix cisinfo_t removal
pcmcia: fix return value in cm4000_cs.c
Linus Torvalds [Thu, 17 Jul 2008 17:38:59 +0000 (10:38 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix asm/e820.h for userspace inclusion
x86: fix numaq_tsc_disable
x86: fix kernel_physical_mapping_init() for large x86 systems
Linus Torvalds [Thu, 17 Jul 2008 17:37:10 +0000 (10:37 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ftrace: do not trace library functions
ftrace: do not trace scheduler functions
ftrace: fix lockup with MAXSMP
ftrace: fix merge buglet
Rusty Russell [Tue, 15 Jul 2008 05:02:27 +0000 (15:02 +1000)]
x86: fix asm/e820.h for userspace inclusion
asm-x86/e820.h is included from userspace. 'x86: make e820.c to have
common functions' (
b79cd8f1268bab57ff85b19d131f7f23deab2dee) broke it:
make -C Documentation/lguest
cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
lguest.c -lz -o lguest
In file included from ../../include/asm-x86/bootparam.h:8,
from lguest.c:45:
../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’
or ‘__attribute__’ before ‘e820_update_range’
...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Tue, 15 Jul 2008 06:29:01 +0000 (23:29 -0700)]
x86: fix numaq_tsc_disable
fix:
arch/x86/kernel/numaq_32.c: In function ‘numaq_tsc_disable’:
arch/x86/kernel/numaq_32.c:99: warning: ‘return’ with a value, in function returning void
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 17 Jul 2008 17:24:56 +0000 (19:24 +0200)]
Merge branch 'linus' into x86/urgent
Takashi Iwai [Thu, 17 Jul 2008 16:09:12 +0000 (18:09 +0200)]
fix build error of arch/ia64/kvm/*
Fix calls of smp_call_function*() in arch/ia64/kvm for recent API
changes.
CC [M] arch/ia64/kvm/kvm-ia64.o
arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge':
arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single'
arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick':
arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single'
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 17 Jul 2008 16:15:23 +0000 (09:15 -0700)]
Merge branch 'ptrace-cleanup' of git://git./linux/kernel/git/frob/linux-2.6-utrace
* 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace:
fix dangling zombie when new parent ignores children
do_wait: return security_task_wait() error code in place of -ECHILD
ptrace children revamp
do_wait reorganization
David Woodhouse [Thu, 17 Jul 2008 06:44:32 +0000 (23:44 -0700)]
Update scripts/Makefile.fwinst to cope with older make
Also fix unwanted rebuilds of the firmware/ihex2fw tool by including
the .ihex2fw.cmd file when present.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 17 Jul 2008 16:05:38 +0000 (09:05 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP
[S390] qdio: new qdio driver.
[S390] cio: Export chsc_error_from_response().
[S390] vmur: Fix return code handling.
[S390] Fix stacktrace compile bug.
[S390] Increase default warning stacksize.
[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().
[S390] chsc headers userspace cleanup
[S390] dasd: fix unsolicited SIM handling.
[S390] zfcpdump: Make SCSI disk dump tool recognize storage holes
Grant Likely [Thu, 17 Jul 2008 07:06:55 +0000 (01:06 -0600)]
Fix collateral damage to top level Makefile
The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile. This patch
backs out the bad bit.
SHA1 of offending patch:
137e95906e294913fab02162e8a1948ade49acb5)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: John Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
I've grown to trust the ppc tree too much ;) - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Thu, 17 Jul 2008 15:40:48 +0000 (17:40 +0200)]
ftrace: do not trace library functions
make function tracing more robust: do not trace library functions.
We've already got a sizable list of exceptions:
ifdef CONFIG_FTRACE
# Do not profile string.o, since it may be used in early boot or vdso
CFLAGS_REMOVE_string.o = -pg
# Also do not profile any debug utilities
CFLAGS_REMOVE_spinlock_debug.o = -pg
CFLAGS_REMOVE_list_debug.o = -pg
CFLAGS_REMOVE_debugobjects.o = -pg
CFLAGS_REMOVE_find_next_bit.o = -pg
CFLAGS_REMOVE_cpumask.o = -pg
CFLAGS_REMOVE_bitmap.o = -pg
endif
... and the pattern has been that random library functionality showed
up in ftrace's critical path (outside of its recursion check), causing
hard to debug lockups.
So be a bit defensive about it and exclude all lib/*.o functions by
default. It's not that they are overly interesting for tracing purposes
anyway. Specific ones can still be traced, in an opt-in manner.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 15 Apr 2008 20:39:31 +0000 (22:39 +0200)]
ftrace: do not trace scheduler functions
do not trace scheduler functions - it's still a bit fragile
and can lock up with:
http://redhat.com/~mingo/misc/config-Thu_Jul_17_13_34_52_CEST_2008
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 17 Jul 2008 15:38:17 +0000 (17:38 +0200)]
ftrace: fix lockup with MAXSMP
MAXSMP brings in lots of use of various bitops in smp_processor_id()
and friends - causing ftrace to lock up during bootup:
calling anon_inode_init+0x0/0x130
initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
calling acpi_event_init+0x0/0x57
[ hard hang ]
So exclude the bitops facilities from tracing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stefan Haberland [Thu, 17 Jul 2008 15:16:49 +0000 (17:16 +0200)]
[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP
return value -ENOTSUPP is not valid in userspace context, use
-EOPNOTSUPP instead
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Jan Glauber [Thu, 17 Jul 2008 15:16:48 +0000 (17:16 +0200)]
[S390] qdio: new qdio driver.
List of major changes:
- split qdio driver into several files
- seperation of thin interrupt code
- improved handling for multiple thin interrupt devices
- inbound and outbound processing now always runs in tasklet context
- significant less tasklet schedules per interrupt needed
- merged qebsm with non-qebsm handling
- cleanup qdio interface and added kerneldoc
- coding style
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com>
Reviewed-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cornelia Huck [Thu, 17 Jul 2008 15:16:47 +0000 (17:16 +0200)]
[S390] cio: Export chsc_error_from_response().
Make chsc_error_from_response() available to chsc callers outside
of chsc.c (namely qdio) to avoid duplicating error checking code.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Frank Munzert [Thu, 17 Jul 2008 15:16:46 +0000 (17:16 +0200)]
[S390] vmur: Fix return code handling.
Use -EOPNOTSUPP instead of -ENOTSUPP.
Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 17 Jul 2008 15:16:45 +0000 (17:16 +0200)]
[S390] Fix stacktrace compile bug.
Add missing module.h include to fix this:
CC arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 17 Jul 2008 15:16:44 +0000 (17:16 +0200)]
[S390] Increase default warning stacksize.
Compiling a kernel with allmodconfig or allyesconfig results in tons
of gcc warnings, because the default maximum stacksize from which on
gcc will emit a warning is just 256 bytes.
Increase this to 2048, so these warnings don't distract from the real
warnings that we need to watch at.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cornelia Huck [Thu, 17 Jul 2008 15:16:43 +0000 (17:16 +0200)]
[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Adrian Bunk [Thu, 17 Jul 2008 15:16:42 +0000 (17:16 +0200)]
[S390] chsc headers userspace cleanup
Kernel headers shouldn't expose functions to userspace.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Haberland [Thu, 17 Jul 2008 15:16:41 +0000 (17:16 +0200)]
[S390] dasd: fix unsolicited SIM handling.
Add missing schedule_bh and check that there is 32 bit sense data.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Munzert [Thu, 17 Jul 2008 15:16:40 +0000 (17:16 +0200)]
[S390] zfcpdump: Make SCSI disk dump tool recognize storage holes
The kernel part of zfcpdump establishes a new debugfs file zcore/memmap
which exports information on memory layout (start address and length of each
memory chunk) to its userspace counterpart.
Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ingo Molnar [Thu, 17 Jul 2008 11:26:50 +0000 (13:26 +0200)]
ftrace: fix merge buglet
-tip testing found a bootup hang here:
initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
calling acpi_event_init+0x0/0x57
the bootup should have continued with:
initcall acpi_event_init+0x0/0x57 returned 0 after 45 msecs
but it hung hard there instead.
bisection led to this commit:
| commit
5806b81ac1c0c52665b91723fd4146a4f86e386b
| Merge: d14c8a6... 6712e29...
| Author: Ingo Molnar <mingo@elte.hu>
| Date: Mon Jul 14 16:11:52 2008 +0200
| Merge branch 'auto-ftrace-next' into tracing/for-linus
turns out that i made this mistake in the merge:
ifdef CONFIG_FTRACE
# Do not profile debug utilities
CFLAGS_REMOVE_tsc_64.o = -pg
CFLAGS_REMOVE_tsc_32.o = -pg
those two files got unified meanwhile - so the dont-profile annotation
got lost. The proper rule is:
CFLAGS_REMOVE_tsc.o = -pg
i guess this could have been caught sooner if the CFLAGS_REMOVE* kbuild
rule aborted the build if it met a target that does not exist anymore?
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Roland McGrath [Wed, 9 Apr 2008 06:12:30 +0000 (23:12 -0700)]
fix dangling zombie when new parent ignores children
This fixes an arcane bug that we think was a regression introduced
by commit
b2b2cbc4b2a2f389442549399a993a8306420baf. When a parent
ignores SIGCHLD (or uses SA_NOCLDWAIT), its children would self-reap
but they don't if it's using ptrace on them. When the parent thread
later exits and ceases to ptrace a child but leaves other live
threads in the parent's thread group, any zombie children are left
dangling. The fix makes them self-reap then, as they would have
done earlier if ptrace had not been in use.
Signed-off-by: Roland McGrath <roland@redhat.com>
Roland McGrath [Mon, 31 Mar 2008 01:41:25 +0000 (18:41 -0700)]
do_wait: return security_task_wait() error code in place of -ECHILD
This reverts the effect of commit
f2cc3eb133baa2e9dc8efd40f417106b2ee520f3
"do_wait: fix security checks". That change reverted the effect of commit
73243284463a761e04d69d22c7516b2be7de096c. The rationale for the original
commit still stands. The inconsistent treatment of children hidden by
ptrace was an unintended omission in the original change and in no way
invalidates its purpose.
This makes do_wait return the error returned by security_task_wait()
(usually -EACCES) in place of -ECHILD when there are some children the
caller would be able to wait for if not for the permission failure. A
permission error will give the user a clue to look for security policy
problems, rather than for mysterious wait bugs.
Signed-off-by: Roland McGrath <roland@redhat.com>
Roland McGrath [Tue, 25 Mar 2008 01:36:23 +0000 (18:36 -0700)]
ptrace children revamp
ptrace no longer fiddles with the children/sibling links, and the
old ptrace_children list is gone. Now ptrace, whether of one's own
children or another's via PTRACE_ATTACH, just uses the new ptraced
list instead.
There should be no user-visible difference that matters. The only
change is the order in which do_wait() sees multiple stopped
children and stopped ptrace attachees. Since wait_task_stopped()
was changed earlier so it no longer reorders the children list, we
already know this won't cause any new problems.
Signed-off-by: Roland McGrath <roland@redhat.com>
Roland McGrath [Thu, 20 Mar 2008 02:24:59 +0000 (19:24 -0700)]
do_wait reorganization
This breaks out the guts of do_wait into three subfunctions.
The control flow is less nonobvious without so much goto.
do_wait_thread and ptrace_do_wait contain the main work of the outer loop.
wait_consider_task contains the main work of the inner loop.
Signed-off-by: Roland McGrath <roland@redhat.com>
Chandra Seetharaman [Thu, 17 Jul 2008 00:35:08 +0000 (17:35 -0700)]
scsi_dh: Verify "dev" is a sdev before accessing it.
Before accessing the device data structure in hardware handlers,
make sure it is a indeed a sdev device.
Yinghai Lu <yhlu.kernel@gmail.com> found the bug on Jul 16, 2008,
and later tested/verified the following fix.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>